diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index b5d5ae9608..8326d228a6 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -944,7 +944,7 @@
    * differs, a mode set eeprom write will be completed at initialization.
    * Use the option below to force an eeprom write to a V3.1 probe regardless.
    */
-  #if NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3S1, Creality422, Creality427, MachineEnder6, MachineEnder7, MachineSermoonD1, MachineCR30, MachineCR6, MachineCR6Max, MachineCR10SmartPro)
+  #if NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3S1, Creality422, Creality427, MachineEnder6, MachineEnder7, MachineSermoonD1, MachineCR30, MachineCR6, MachineCR6Max, MachineCR10SmartPro, MachineEnder2Pro)
     #define BLTOUCH_SET_5V_MODE
   #endif
   /**
diff --git a/Marlin/src/lcd/extui/Creality/Creality_DWIN.cpp b/Marlin/src/lcd/extui/Creality/Creality_DWIN.cpp
index 9454f9aa6b..f5ec2b56e3 100644
--- a/Marlin/src/lcd/extui/Creality/Creality_DWIN.cpp
+++ b/Marlin/src/lcd/extui/Creality/Creality_DWIN.cpp
@@ -65,6 +65,7 @@ namespace ExtUI
   bool FanStatus = true;
   bool AutohomeKey = false;
   unsigned char AutoHomeIconNum;
+  int16_t userConfValidation = 0;
 
   uint8_t lastPauseMsgState = 0;
 
@@ -75,6 +76,7 @@ namespace ExtUI
   uint8_t reEntryCount = 0;
   uint16_t idleThrottling = 0;
 
+  bool pause_resume_selected = false;
 
   #if HAS_PID_HEATING
     uint16_t pid_hotendAutoTemp = 150;
@@ -176,7 +178,7 @@ void onIdle()
   rtscheck.RTS_SndData(getTargetTemp_celsius(H0), NozzlePreheat);
 	rtscheck.RTS_SndData(getTargetTemp_celsius(BED), BedPreheat);
 
-  if(awaitingUserConfirm() && lastPauseMsgState!=ExtUI::pauseModeStatus)
+  if(awaitingUserConfirm() && (lastPauseMsgState!=ExtUI::pauseModeStatus || userConfValidation > 2000))
   {
     switch(ExtUI::pauseModeStatus)
       {
@@ -199,8 +201,23 @@ void onIdle()
       case PAUSE_MESSAGE_STATUS: SERIAL_ECHOLNPGM_P(PSTR("PauseStatus")); break;
       default: onUserConfirmRequired(PSTR("Confirm Continue")); break;
     }
+    userConfValidation = 0;
 
+  } else if (pause_resume_selected && !awaitingUserConfirm()) {
+      rtscheck.RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
+      pause_resume_selected = false;
+      userConfValidation = 0;
   }
+  else if (awaitingUserConfirm() && !pause_resume_selected)
+  {
+    userConfValidation++;
+  }
+  else if (awaitingUserConfirm() && pause_resume_selected)
+  {
+    pause_resume_selected = false;
+    userConfValidation = 2001;
+  }
+
 
   reEntryPrevent = true;
   idleThrottling = 0;
@@ -1795,7 +1812,7 @@ void RTSSHOW::RTS_HandleData()
           setUserConfirmed();
           RTS_SndData(1 + CEIconGrap, IconPrintstatus);
           PrinterStatusKey[1] = 3;
-          RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
+          pause_resume_selected = true;
           //reEntryPrevent = false;
         }
       }
diff --git a/platformio.ini b/platformio.ini
index 9d9948c4d4..26e4744c68 100644
--- a/platformio.ini
+++ b/platformio.ini
@@ -393,6 +393,7 @@ default_envs =
   SermoonD1_BLT_ZM
   CR10Smart
   Ender2Pro
+  Ender2Pro_BLT
   CR5Pro
   CR5Pro_BLT
 
@@ -3956,6 +3957,24 @@ build_flags                 = ${stm32_variant.build_flags}
                               -DSS_TIMER=4 -DTIMER_SERVO=TIM5
                               -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8      -DMachineEnder2Pro
 
+[env:Ender2Pro_BLT]
+extends                     = stm32_variant
+board_build.variant         = MARLIN_F103Rx
+board_build.offset          = 0x7000
+board_upload.offset_address = 0x08007000
+build_unflags               = ${stm32_variant.build_unflags}
+                              -DUSBCON -DUSBD_USE_CDC
+extra_scripts               = ${stm32_variant.extra_scripts}
+                              pre:buildroot/share/PlatformIO/scripts/random-bin.py
+monitor_speed               = 115200
+debug_tool                  = jlink
+upload_protocol             = jlink
+board   = genericSTM32F103RC
+build_flags                 = ${stm32_variant.build_flags}
+                              -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
+                              -DSS_TIMER=4 -DTIMER_SERVO=TIM5
+                              -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8      -DMachineEnder2Pro -DABL_BLTOUCH
+
 [env:CR5Pro]
 platform      = atmelavr
 extends       = common_avr8