From 0edde09d7f93ce6260b0ee0fb24d8b242404956f Mon Sep 17 00:00:00 2001 From: Scott Lahteine Date: Tue, 10 Sep 2024 03:13:43 -0500 Subject: [PATCH] etc --- Marlin/src/gcode/calibrate/G425.cpp | 12 ++++++------ 1 file changed, 6 insertions(+), 6 deletions(-) diff --git a/Marlin/src/gcode/calibrate/G425.cpp b/Marlin/src/gcode/calibrate/G425.cpp index 66c6f52fb2..6338873ea7 100644 --- a/Marlin/src/gcode/calibrate/G425.cpp +++ b/Marlin/src/gcode/calibrate/G425.cpp @@ -332,16 +332,16 @@ inline void probe_sides(measurements_t &m, const float uncertainty) { probe_side(m, uncertainty, TOP); #endif + /** + * Allow Y axis to probe and compute values before X axis (or remaining arbitrary axes) + * to assist with centering in calibration object. Lulzbot saw issues with higher uncertainty + * values where the nozzle was catching on the edges of the cube, and this was intended to help + * ensure the probe object remained centered. + */ TERN_(CALIBRATION_MEASURE_FRONT, probe_side(m, uncertainty, FRONT, probe_top_at_edge)); TERN_(CALIBRATION_MEASURE_BACK, probe_side(m, uncertainty, BACK, probe_top_at_edge)); #if HAS_Y_CENTER - /** - * Allow Y axis to probe and compute values before X axis (or remaining arbitrary axes) - * to assist with centering in calibration object. Lulzbot saw issues with higher uncertainty - * values where the nozzle was catching on the edges of the cube, and this was intended to help - * ensure the probe object remained centered. - */ m.obj_center.y = (m.obj_side[FRONT] + m.obj_side[BACK]) / 2; m.nozzle_outer_dimension.y = m.obj_side[BACK] - m.obj_side[FRONT] - dimensions.y; #endif