From 1b6f303adb11a6c463b304cd031aeccaebabf9e8 Mon Sep 17 00:00:00 2001
From: InsanityAutomation <d.menzel@insanityautomation.com>
Date: Sun, 27 Oct 2019 13:02:33 -0400
Subject: [PATCH] Update Configuration.h

---
 Marlin/Configuration.h | 16 ++++++++--------
 1 file changed, 8 insertions(+), 8 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index d39f1cf284..db1a789b24 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -16,10 +16,10 @@
 //#define MachineCR10
 //#define MachineCR10S
 //#define MachineCR10SV2
-//#define MachineCR10SPro // Graphics LCD Requires soldering R64 and R66
+#define MachineCR10SPro // Graphics LCD Requires soldering R64 and R66
 //#define MachineCR10SProV2 // Second Gen 10S Pro with BLTouch wired to Z Max
 //#define MachineCRX
-#define MachineCR10Max
+//#define MachineCR10Max
 //#define MachineS4
 //#define MachineS5
 //#define MachineCR2020 // Industrial Series 2020
@@ -37,7 +37,7 @@
 //#define OrigLCD // Upgraded mainboard with single cable Ender LCD
 //#define GraphicLCD //Full graphics LCD for Ender 4, CR-X or CR10SPro
 //#define ForceCRXDisplay
-#define Force10SProDisplay
+//#define Force10SProDisplay
 
 //#define AddonFilSensor //Adds a filamnt runout sensor to the CR20 or Ender 4
 //#define lerdgeFilSensor //Using lerdge filament sensor, which is opposite polarity to stock
@@ -58,9 +58,9 @@
 
    Configured with 5015 left wing, right wing ABL sensor (BLTouch or M18) only
 */
-//#define HotendStock
+#define HotendStock
 //#define HotendE3D
-#define HotendMosquito
+//#define HotendMosquito
 
 //Enable this if you have an all metal hotend capable of 300c
 #define HotendAllMetal
@@ -102,7 +102,7 @@
    Leave all disabled if no sensor is available
 */
 //#define ABL_EZABL // TH3D EZABL or Any NO Sensor
-#define ABL_NCSW //Creality ABL or Any NC Sensor
+//#define ABL_NCSW //Creality ABL or Any NC Sensor
 //#define ABL_BLTOUCH
 
 //#define CREALITY_ABL_MOUNT //Using creality ABL mount
@@ -114,7 +114,7 @@
    Requires a sensor from above
    Melzi board users may only select ABL_BI for bilinear leveling
 */
-#define ABL_BI
+//#define ABL_BI
 //#define ABL_UBL
 
 //#define POWER_LOSS_RECOVERY //Large and does not fit with any other features on Melzi, or UBL on Atmega
@@ -2160,7 +2160,7 @@
   #elif ENABLED(MachineCRX)
     #define Z_SAFE_HOMING_X_POINT 50 + HOMING_ADD    // X point for Z homing when homing all axis (G28).
     #define Z_SAFE_HOMING_Y_POINT 70 + HOMING_ADD    // Y point for Z homing when homing all axis (G28).
-  #elif ANY(MachineEnder5, MachineEnder5Plus)  
+  #elif ANY(MachineEnder5, MachineEnder5Plus)
     #define Z_SAFE_HOMING_X_POINT 110 + HOMING_ADD    // X point for Z homing when homing all axis (G28).
     #define Z_SAFE_HOMING_Y_POINT 110 + HOMING_ADD    // Y point for Z homing when homing all axis (G28).
   #else