From 47af1c2f53ff4ab67233c47948918c4af8b87a78 Mon Sep 17 00:00:00 2001 From: InsanityAutomation Date: Sat, 31 Jul 2021 16:21:50 -0400 Subject: [PATCH] Update Configuration_adv.h --- Marlin/Configuration_adv.h | 6 +++--- 1 file changed, 3 insertions(+), 3 deletions(-) diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index c126c84de6..fab7f4d241 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -293,7 +293,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 40 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -301,13 +301,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 90 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif