diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index e27a7c7400..a4949eae50 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1042,6 +1042,7 @@ * 67 : 500kΩ SliceEngineering 450°C Thermistor * 70 : 100kΩ bq Hephestos 2 * 75 : 100kΩ Generic Silicon Heat Pad with NTC100K MGB18-104F39050L32 + * 2000 : 100kΩ Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor * * Analog Thermistors - 1kΩ pullup - Atypical, and requires changing out the 4.7kΩ pullup for 1kΩ. * ------- (but gives greater accuracy and more stable PID) @@ -1065,7 +1066,7 @@ * NOTE: ADC pins are not 5V tolerant. Not recommended because it's possible to damage the CPU by going over 500°C. * 201 : Pt100 with circuit in Overlord, similar to Ultimainboard V2.x * - * Custom/Dummy/Other Thermos + * Custom/Dummy/Other Thermal Sensors * ------ * 0 : not used * 1000 : Custom - Specify parameters in Configuration_adv.h @@ -1118,6 +1119,8 @@ #define TEMP_CHAMBER_PIN 12 #endif #define TEMP_SENSOR_COOLER 0 +#define TEMP_SENSOR_BOARD 0 +#define TEMP_SENSOR_REDUNDANT 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -1155,17 +1158,11 @@ * the print will be aborted. Whichever sensor is selected will have its normal functions disabled; i.e. selecting * the Bed sensor (-1) will disable bed heating/monitoring. * - * Use the following to select temp sensors: - * -5 : Cooler - * -4 : Probe - * -3 : not used - * -2 : Chamber - * -1 : Bed - * 0-7 : E0 through E7 + * For selecting source/target use: COOLER, PROBE, BOARD, CHAMBER, BED, E0, E1, E2, E3, E4, E5, E6, E7 */ #if TEMP_SENSOR_REDUNDANT - #define TEMP_SENSOR_REDUNDANT_SOURCE 1 // The sensor that will provide the redundant reading. - #define TEMP_SENSOR_REDUNDANT_TARGET 0 // The sensor that we are providing a redundant reading for. + #define TEMP_SENSOR_REDUNDANT_SOURCE E1 // The sensor that will provide the redundant reading. + #define TEMP_SENSOR_REDUNDANT_TARGET E0 // The sensor that we are providing a redundant reading for. #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 // (°C) Temperature difference that will trigger a print abort. #endif @@ -3742,6 +3739,11 @@ // //#define MKS_MINI_12864 +// +// MKS MINI12864 V3 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight. +// +//#define MKS_MINI_12864_V3 + // // MKS LCD12864A/B with graphic controller and SD support. Follows MKS_MINI_12864 pinout. // https://www.aliexpress.com/item/33018110072.html diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 94e116c325..e0361baf29 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -125,6 +125,12 @@ #define PROBE_BETA 3950 // Beta value #endif +#if TEMP_SENSOR_BOARD == 1000 + #define BOARD_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor + #define BOARD_RESISTANCE_25C_OHMS 100000 // Resistance at 25C + #define BOARD_BETA 3950 // Beta value +#endif + #if TEMP_SENSOR_REDUNDANT == 1000 #define REDUNDANT_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor #define REDUNDANT_RESISTANCE_25C_OHMS 100000 // Resistance at 25C @@ -224,6 +230,18 @@ #endif #endif +// +// Motherboard Sensor options +// +#if TEMP_SENSOR_BOARD + #define THERMAL_PROTECTION_BOARD // Halt the printer if the board sensor leaves the temp range below. + #define BOARD_MINTEMP 8 // (°C) + #define BOARD_MAXTEMP 70 // (°C) + #ifndef TEMP_BOARD_PIN + //#define TEMP_BOARD_PIN -1 // Board temp sensor pin, if not set in pins file. + #endif +#endif + // // Laser Coolant Flow Meter // @@ -505,15 +523,20 @@ #define USE_CONTROLLER_FAN #endif #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan - //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered - #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) - #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled - #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled - #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors - //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + //#define CONTROLLER_FAN_USE_Z_ONLY // With this option only the Z axis is considered + //#define CONTROLLER_FAN_IGNORE_Z // Ignore Z stepper. Useful when stepper timeout is disabled. + #define CONTROLLERFAN_SPEED_MIN 0 // (0-255) Minimum speed. (If set below this value the fan is turned off.) + #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled + #define CONTROLLERFAN_SPEED_IDLE 0 // (0-255) Idle speed, used when motors are disabled + #define CONTROLLERFAN_IDLE_TIME 60 // (seconds) Extra time to keep the fan running after disabling motors + + // Use TEMP_SENSOR_BOARD as a trigger for enabling the controller fan + //#define CONTROLLER_FAN_MIN_BOARD_TEMP 40 // (°C) Turn on the fan if the board reaches this temperature + + //#define CONTROLLER_FAN_EDITABLE // Enable M710 configurable settings #if ENABLED(CONTROLLER_FAN_EDITABLE) - #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu + #define CONTROLLER_FAN_MENU // Enable the Controller Fan submenu #endif #endif @@ -2093,9 +2116,9 @@ // calibration. //#define BTC_PROBE_TEMP 30 // (°C) - // Height above Z=0.0f to raise the nozzle. Lowering this can help the probe to heat faster. - // Note: the Z=0.0f offset is determined by the probe offset which can be set using M851. - //#define PTC_PROBE_HEATING_OFFSET 0.5f + // Height above Z=0.0 to raise the nozzle. Lowering this can help the probe to heat faster. + // Note: the Z=0.0 offset is determined by the probe offset which can be set using M851. + //#define PTC_PROBE_HEATING_OFFSET 0.5 // Height to raise the Z-probe between heating and taking the next measurement. Some probes // may fail to untrigger if they have been triggered for a long time, which can be solved by diff --git a/Marlin/Version.h b/Marlin/Version.h index fc80feb2a5..c26f4f9560 100644 --- a/Marlin/Version.h +++ b/Marlin/Version.h @@ -119,7 +119,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ -#define STRING_DISTRIBUTION_DATE "2021-06-18" +#define STRING_DISTRIBUTION_DATE "2021-07-21" /** * Defines a generic printer name to be output to the LCD after booting Marlin. diff --git a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp index cb95a48ccc..9d928e7af3 100644 --- a/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp +++ b/Marlin/src/HAL/AVR/u8g_com_HAL_AVR_sw_spi.cpp @@ -62,7 +62,7 @@ #include "../shared/Marduino.h" #include "../shared/Delay.h" -#include +#include uint8_t u8g_bitData, u8g_bitNotData, u8g_bitClock, u8g_bitNotClock; volatile uint8_t *u8g_outData, *u8g_outClock; diff --git a/Marlin/src/HAL/DUE/HAL_SPI.cpp b/Marlin/src/HAL/DUE/HAL_SPI.cpp index f42e8a9802..758640285b 100644 --- a/Marlin/src/HAL/DUE/HAL_SPI.cpp +++ b/Marlin/src/HAL/DUE/HAL_SPI.cpp @@ -240,7 +240,7 @@ } // all the others - static uint32_t spiDelayCyclesX4 = 4 * (F_CPU) / 1000000; // 4µs => 125khz + static uint16_t spiDelayNS = 4000; // 4000ns => 125khz static uint8_t spiTransferX(uint8_t b) { // using Mode 0 int bits = 8; @@ -249,12 +249,12 @@ b <<= 1; // little setup time WRITE(SD_SCK_PIN, HIGH); - DELAY_CYCLES(spiDelayCyclesX4); + DELAY_NS(spiDelayNS); b |= (READ(SD_MISO_PIN) != 0); WRITE(SD_SCK_PIN, LOW); - DELAY_CYCLES(spiDelayCyclesX4); + DELAY_NS(spiDelayNS); } while (--bits); return b; } @@ -510,7 +510,7 @@ spiRxBlock = (pfnSpiRxBlock)spiRxBlockX; break; default: - spiDelayCyclesX4 = ((F_CPU) / 1000000) >> (6 - spiRate) << 2; // spiRate of 2 gives the maximum error with current CPU + spiDelayNS = 4000 >> (6 - spiRate); // spiRate of 2 gives the maximum error with current CPU spiTransferTx = (pfnSpiTransfer)spiTransferX; spiTransferRx = (pfnSpiTransfer)spiTransferX; spiTxBlock = (pfnSpiTxBlock)spiTxBlockX; diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp index d07da15ad8..fcfcef88be 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_shared_hw_spi.cpp @@ -60,7 +60,7 @@ #if HAS_MARLINUI_U8GLIB -#include +#include #include "../../../MarlinCore.h" diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp index d01cd4dd6b..65bfd4f4e2 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_st7920_sw_spi.cpp @@ -62,7 +62,7 @@ #include "../../../inc/MarlinConfig.h" #include "../../shared/Delay.h" -#include +#include #include "u8g_com_HAL_DUE_sw_spi_shared.h" diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp index 890546af58..2b13c182d0 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi.cpp @@ -64,7 +64,7 @@ #include "../../shared/Marduino.h" #include "../../shared/Delay.h" -#include +#include #if ENABLED(FYSETC_MINI_12864) #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3 diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp index 4fb7a6e2c3..904924793b 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.cpp @@ -62,7 +62,7 @@ #include "../../../inc/MarlinConfig.h" #include "../../shared/Delay.h" -#include +#include #include "u8g_com_HAL_DUE_sw_spi_shared.h" diff --git a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h index f076c503ca..45231fd091 100644 --- a/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h +++ b/Marlin/src/HAL/DUE/dogm/u8g_com_HAL_DUE_sw_spi_shared.h @@ -23,7 +23,7 @@ #include "../../../inc/MarlinConfigPre.h" #include "../../shared/Marduino.h" -#include +#include void u8g_SetPIOutput_DUE(u8g_t *u8g, uint8_t pin_index); void u8g_SetPILevel_DUE(u8g_t *u8g, uint8_t pin_index, uint8_t level); diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp index b1eea13d57..0118f92847 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_hw_spi.cpp @@ -59,7 +59,7 @@ #if HAS_MARLINUI_U8GLIB -#include +#include #include "../../shared/HAL_SPI.h" #ifndef LCD_SPI_SPEED diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp index 6f7efba4ae..bf76eaf0f4 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_ssd_hw_i2c.cpp @@ -79,7 +79,7 @@ #if HAS_MARLINUI_U8GLIB -#include +#include #define I2C_SLA (0x3C*2) //#define I2C_CMD_MODE 0x080 diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp index 0b0626de79..ce7b338019 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp @@ -59,7 +59,7 @@ #if HAS_MARLINUI_U8GLIB -#include +#include #include "../../shared/HAL_SPI.h" #include "../../shared/Delay.h" diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp index 61211d9d88..039fa6769b 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_sw_spi.cpp @@ -59,7 +59,7 @@ #if ENABLED(U8GLIB_ST7920) -#include +#include #include #include "../../shared/Delay.h" #include "../../shared/HAL_SPI.h" diff --git a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp index 7f38ec54af..3308d03e79 100644 --- a/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp +++ b/Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_sw_spi.cpp @@ -71,7 +71,7 @@ #include #include -#include +#include uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) { diff --git a/Marlin/src/HAL/STM32/HAL.cpp b/Marlin/src/HAL/STM32/HAL.cpp index e09b52f7db..d8035a979d 100644 --- a/Marlin/src/HAL/STM32/HAL.cpp +++ b/Marlin/src/HAL/STM32/HAL.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "HAL.h" #include "usb_serial.h" @@ -91,15 +91,13 @@ void HAL_init() { USB_Hook_init(); #endif - TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler + TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler - #if HAS_SD_HOST_DRIVE - MSC_SD_init(); // Enable USB SD card access - #endif + TERN_(HAS_SD_HOST_DRIVE, MSC_SD_init()); // Enable USB SD card access #if PIN_EXISTS(USB_CONNECT) - OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection - delay(1000); // Give OS time to notice + OUT_WRITE(USB_CONNECT_PIN, !USB_CONNECT_INVERTING); // USB clear connection + delay(1000); // Give OS time to notice WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING); #endif } @@ -167,4 +165,4 @@ void HAL_SYSTICK_Callback() { if (systick_user_callback) systick_user_callback(); } -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/HAL_MinSerial.cpp b/Marlin/src/HAL/STM32/HAL_MinSerial.cpp index 7268eed591..44fb93337d 100644 --- a/Marlin/src/HAL/STM32/HAL_MinSerial.cpp +++ b/Marlin/src/HAL/STM32/HAL_MinSerial.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfigPre.h" diff --git a/Marlin/src/HAL/STM32/HAL_SPI.cpp b/Marlin/src/HAL/STM32/HAL_SPI.cpp index bd36562de9..ba8e6bef19 100644 --- a/Marlin/src/HAL/STM32/HAL_SPI.cpp +++ b/Marlin/src/HAL/STM32/HAL_SPI.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -224,4 +224,4 @@ static SPISettings spiConfig; #endif // SOFTWARE_SPI -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/MarlinSPI.cpp b/Marlin/src/HAL/STM32/MarlinSPI.cpp index 896ec1433f..41081dfb80 100644 --- a/Marlin/src/HAL/STM32/MarlinSPI.cpp +++ b/Marlin/src/HAL/STM32/MarlinSPI.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(STM32H7xx) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) && !defined(STM32H7xx) #include "MarlinSPI.h" @@ -165,4 +165,4 @@ uint8_t MarlinSPI::dmaSend(const void * transmitBuf, uint16_t length, bool minc) return 1; } -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 && !STM32H7xx diff --git a/Marlin/src/HAL/STM32/MarlinSerial.cpp b/Marlin/src/HAL/STM32/MarlinSerial.cpp index 265e8b5ab6..d990d2f428 100644 --- a/Marlin/src/HAL/STM32/MarlinSerial.cpp +++ b/Marlin/src/HAL/STM32/MarlinSerial.cpp @@ -16,7 +16,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" #include "MarlinSerial.h" @@ -101,4 +101,4 @@ void MarlinSerial::_rx_complete_irq(serial_t *obj) { } } -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp index 3353f8c36b..05f859a4af 100644 --- a/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp +++ b/Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -28,319 +28,296 @@ #include #include -#if NONE(STM32F103xE, STM32F103xG, STM32F4xx, STM32F7xx) - #error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported" +// use local drivers +#if defined(STM32F103xE) || defined(STM32F103xG) + #include + #include +#elif defined(STM32F4xx) + #include + #include + #include + #include +#elif defined(STM32F7xx) + #include + #include + #include + #include +#else + #error "SDIO only supported with STM32F103xE, STM32F103xG, STM32F4xx, or STM32F7xx." #endif -#if HAS_SD_HOST_DRIVE +// Fixed +#define SDIO_D0_PIN PC8 +#define SDIO_D1_PIN PC9 +#define SDIO_D2_PIN PC10 +#define SDIO_D3_PIN PC11 +#define SDIO_CK_PIN PC12 +#define SDIO_CMD_PIN PD2 - // use USB drivers +SD_HandleTypeDef hsd; // create SDIO structure +// F4 supports one DMA for RX and another for TX, but Marlin will never +// do read and write at same time, so we use the same DMA for both. +DMA_HandleTypeDef hdma_sdio; - extern "C" { - int8_t SD_MSC_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len); - int8_t SD_MSC_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len); - extern SD_HandleTypeDef hsd; - } +/* + SDIO_INIT_CLK_DIV is 118 + SDIO clock frequency is 48MHz / (TRANSFER_CLOCK_DIV + 2) + SDIO init clock frequency should not exceed 400KHz = 48MHz / (118 + 2) - bool SDIO_Init() { - return hsd.State == HAL_SD_STATE_READY; // return pass/fail status - } + Default TRANSFER_CLOCK_DIV is 2 (118 / 40) + Default SDIO clock frequency is 48MHz / (2 + 2) = 12 MHz + This might be too fast for stable SDIO operations - bool SDIO_ReadBlock(uint32_t block, uint8_t *src) { - int8_t status = SD_MSC_Read(0, (uint8_t*)src, block, 1); // read one 512 byte block - return (bool) status; - } + MKS Robin board seems to have stable SDIO with BusWide 1bit and ClockDiv 8 i.e. 4.8MHz SDIO clock frequency + Additional testing is required as there are clearly some 4bit initialization problems +*/ - bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) { - int8_t status = SD_MSC_Write(0, (uint8_t*)src, block, 1); // write one 512 byte block - return (bool) status; - } +#ifndef USBD_OK + #define USBD_OK 0 +#endif -#else // !USBD_USE_CDC_COMPOSITE +// Target Clock, configurable. Default is 18MHz, from STM32F1 +#ifndef SDIO_CLOCK + #define SDIO_CLOCK 18000000 // 18 MHz +#endif - // use local drivers - #if defined(STM32F103xE) || defined(STM32F103xG) - #include - #include - #elif defined(STM32F4xx) - #include - #include - #include - #include - #elif defined(STM32F7xx) - #include - #include - #include - #include - #else - #error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported" +// SDIO retries, configurable. Default is 3, from STM32F1 +#ifndef SDIO_READ_RETRIES + #define SDIO_READ_RETRIES 3 +#endif + +// SDIO Max Clock (naming from STM Manual, don't change) +#define SDIOCLK 48000000 + +static uint32_t clock_to_divider(uint32_t clk) { + // limit the SDIO master clock to 8/3 of PCLK2. See STM32 Manuals + // Also limited to no more than 48Mhz (SDIOCLK). + const uint32_t pclk2 = HAL_RCC_GetPCLK2Freq(); + clk = min(clk, (uint32_t)(pclk2 * 8 / 3)); + clk = min(clk, (uint32_t)SDIOCLK); + // Round up divider, so we don't run the card over the speed supported, + // and subtract by 2, because STM32 will add 2, as written in the manual: + // SDIO_CK frequency = SDIOCLK / [CLKDIV + 2] + return pclk2 / clk + (pclk2 % clk != 0) - 2; +} + +void go_to_transfer_speed() { + /* Default SDIO peripheral configuration for SD card initialization */ + hsd.Init.ClockEdge = hsd.Init.ClockEdge; + hsd.Init.ClockBypass = hsd.Init.ClockBypass; + hsd.Init.ClockPowerSave = hsd.Init.ClockPowerSave; + hsd.Init.BusWide = hsd.Init.BusWide; + hsd.Init.HardwareFlowControl = hsd.Init.HardwareFlowControl; + hsd.Init.ClockDiv = clock_to_divider(SDIO_CLOCK); + + /* Initialize SDIO peripheral interface with default configuration */ + SDIO_Init(hsd.Instance, hsd.Init); +} + +void SD_LowLevel_Init(void) { + uint32_t tempreg; + + __HAL_RCC_GPIOC_CLK_ENABLE(); //enable GPIO clocks + __HAL_RCC_GPIOD_CLK_ENABLE(); //enable GPIO clocks + + GPIO_InitTypeDef GPIO_InitStruct; + + GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; + GPIO_InitStruct.Pull = 1; //GPIO_NOPULL; + GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; + + #if DISABLED(STM32F1xx) + GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; #endif - // Fixed - #define SDIO_D0_PIN PC8 - #define SDIO_D1_PIN PC9 - #define SDIO_D2_PIN PC10 - #define SDIO_D3_PIN PC11 - #define SDIO_CK_PIN PC12 - #define SDIO_CMD_PIN PD2 + GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_12; // D0 & SCK + HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - SD_HandleTypeDef hsd; // create SDIO structure - // F4 supports one DMA for RX and another for TX, but Marlin will never - // do read and write at same time, so we use the same DMA for both. - DMA_HandleTypeDef hdma_sdio; - - /* - SDIO_INIT_CLK_DIV is 118 - SDIO clock frequency is 48MHz / (TRANSFER_CLOCK_DIV + 2) - SDIO init clock frequency should not exceed 400KHz = 48MHz / (118 + 2) - - Default TRANSFER_CLOCK_DIV is 2 (118 / 40) - Default SDIO clock frequency is 48MHz / (2 + 2) = 12 MHz - This might be too fast for stable SDIO operations - - MKS Robin board seems to have stable SDIO with BusWide 1bit and ClockDiv 8 i.e. 4.8MHz SDIO clock frequency - Additional testing is required as there are clearly some 4bit initialization problems - */ - - #ifndef USBD_OK - #define USBD_OK 0 - #endif - - // Target Clock, configurable. Default is 18MHz, from STM32F1 - #ifndef SDIO_CLOCK - #define SDIO_CLOCK 18000000 // 18 MHz - #endif - - // SDIO retries, configurable. Default is 3, from STM32F1 - #ifndef SDIO_READ_RETRIES - #define SDIO_READ_RETRIES 3 - #endif - - // SDIO Max Clock (naming from STM Manual, don't change) - #define SDIOCLK 48000000 - - static uint32_t clock_to_divider(uint32_t clk) { - // limit the SDIO master clock to 8/3 of PCLK2. See STM32 Manuals - // Also limited to no more than 48Mhz (SDIOCLK). - const uint32_t pclk2 = HAL_RCC_GetPCLK2Freq(); - clk = min(clk, (uint32_t)(pclk2 * 8 / 3)); - clk = min(clk, (uint32_t)SDIOCLK); - // Round up divider, so we don't run the card over the speed supported, - // and subtract by 2, because STM32 will add 2, as written in the manual: - // SDIO_CK frequency = SDIOCLK / [CLKDIV + 2] - return pclk2 / clk + (pclk2 % clk != 0) - 2; - } - - void go_to_transfer_speed() { - /* Default SDIO peripheral configuration for SD card initialization */ - hsd.Init.ClockEdge = hsd.Init.ClockEdge; - hsd.Init.ClockBypass = hsd.Init.ClockBypass; - hsd.Init.ClockPowerSave = hsd.Init.ClockPowerSave; - hsd.Init.BusWide = hsd.Init.BusWide; - hsd.Init.HardwareFlowControl = hsd.Init.HardwareFlowControl; - hsd.Init.ClockDiv = clock_to_divider(SDIO_CLOCK); - - /* Initialize SDIO peripheral interface with default configuration */ - SDIO_Init(hsd.Instance, hsd.Init); - } - - void SD_LowLevel_Init(void) { - uint32_t tempreg; - - __HAL_RCC_GPIOC_CLK_ENABLE(); //enable GPIO clocks - __HAL_RCC_GPIOD_CLK_ENABLE(); //enable GPIO clocks - - GPIO_InitTypeDef GPIO_InitStruct; - - GPIO_InitStruct.Mode = GPIO_MODE_AF_PP; - GPIO_InitStruct.Pull = 1; //GPIO_NOPULL; - GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_HIGH; - - #if DISABLED(STM32F1xx) - GPIO_InitStruct.Alternate = GPIO_AF12_SDIO; - #endif - - GPIO_InitStruct.Pin = GPIO_PIN_8 | GPIO_PIN_12; // D0 & SCK + #if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // define D1-D3 only if have a four bit wide SDIO bus + GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11; // D1-D3 HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); + #endif - #if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // define D1-D3 only if have a four bit wide SDIO bus - GPIO_InitStruct.Pin = GPIO_PIN_9 | GPIO_PIN_10 | GPIO_PIN_11; // D1-D3 - HAL_GPIO_Init(GPIOC, &GPIO_InitStruct); - #endif + // Configure PD.02 CMD line + GPIO_InitStruct.Pin = GPIO_PIN_2; + HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); - // Configure PD.02 CMD line - GPIO_InitStruct.Pin = GPIO_PIN_2; - HAL_GPIO_Init(GPIOD, &GPIO_InitStruct); + // Setup DMA + #if defined(STM32F1xx) + hdma_sdio.Init.Mode = DMA_NORMAL; + hdma_sdio.Instance = DMA2_Channel4; + HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn); + #elif defined(STM32F4xx) + hdma_sdio.Init.Mode = DMA_PFCTRL; + hdma_sdio.Instance = DMA2_Stream3; + hdma_sdio.Init.Channel = DMA_CHANNEL_4; + hdma_sdio.Init.FIFOMode = DMA_FIFOMODE_ENABLE; + hdma_sdio.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; + hdma_sdio.Init.MemBurst = DMA_MBURST_INC4; + hdma_sdio.Init.PeriphBurst = DMA_PBURST_INC4; + HAL_NVIC_EnableIRQ(DMA2_Stream3_IRQn); + #endif + HAL_NVIC_EnableIRQ(SDIO_IRQn); + hdma_sdio.Init.PeriphInc = DMA_PINC_DISABLE; + hdma_sdio.Init.MemInc = DMA_MINC_ENABLE; + hdma_sdio.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD; + hdma_sdio.Init.MemDataAlignment = DMA_MDATAALIGN_WORD; + hdma_sdio.Init.Priority = DMA_PRIORITY_LOW; + __HAL_LINKDMA(&hsd, hdmarx, hdma_sdio); + __HAL_LINKDMA(&hsd, hdmatx, hdma_sdio); - // Setup DMA - #if defined(STM32F1xx) - hdma_sdio.Init.Mode = DMA_NORMAL; - hdma_sdio.Instance = DMA2_Channel4; - HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn); - #elif defined(STM32F4xx) - hdma_sdio.Init.Mode = DMA_PFCTRL; - hdma_sdio.Instance = DMA2_Stream3; - hdma_sdio.Init.Channel = DMA_CHANNEL_4; - hdma_sdio.Init.FIFOMode = DMA_FIFOMODE_ENABLE; - hdma_sdio.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL; - hdma_sdio.Init.MemBurst = DMA_MBURST_INC4; - hdma_sdio.Init.PeriphBurst = DMA_PBURST_INC4; - HAL_NVIC_EnableIRQ(DMA2_Stream3_IRQn); - #endif - HAL_NVIC_EnableIRQ(SDIO_IRQn); - hdma_sdio.Init.PeriphInc = DMA_PINC_DISABLE; - hdma_sdio.Init.MemInc = DMA_MINC_ENABLE; - hdma_sdio.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD; - hdma_sdio.Init.MemDataAlignment = DMA_MDATAALIGN_WORD; - hdma_sdio.Init.Priority = DMA_PRIORITY_LOW; - __HAL_LINKDMA(&hsd, hdmarx, hdma_sdio); - __HAL_LINKDMA(&hsd, hdmatx, hdma_sdio); + #if defined(STM32F1xx) + __HAL_RCC_SDIO_CLK_ENABLE(); + __HAL_RCC_DMA2_CLK_ENABLE(); + #else + __HAL_RCC_SDIO_FORCE_RESET(); + delay(2); + __HAL_RCC_SDIO_RELEASE_RESET(); + delay(2); + __HAL_RCC_SDIO_CLK_ENABLE(); - #if defined(STM32F1xx) - __HAL_RCC_SDIO_CLK_ENABLE(); - __HAL_RCC_DMA2_CLK_ENABLE(); - #else - __HAL_RCC_SDIO_FORCE_RESET(); - delay(2); - __HAL_RCC_SDIO_RELEASE_RESET(); - delay(2); - __HAL_RCC_SDIO_CLK_ENABLE(); + __HAL_RCC_DMA2_FORCE_RESET(); + delay(2); + __HAL_RCC_DMA2_RELEASE_RESET(); + delay(2); + __HAL_RCC_DMA2_CLK_ENABLE(); + #endif - __HAL_RCC_DMA2_FORCE_RESET(); - delay(2); - __HAL_RCC_DMA2_RELEASE_RESET(); - delay(2); - __HAL_RCC_DMA2_CLK_ENABLE(); - #endif + //Initialize the SDIO (with initial <400Khz Clock) + tempreg = 0; //Reset value + tempreg |= SDIO_CLKCR_CLKEN; // Clock enabled + tempreg |= SDIO_INIT_CLK_DIV; // Clock Divider. Clock = 48000 / (118 + 2) = 400Khz + // Keep the rest at 0 => HW_Flow Disabled, Rising Clock Edge, Disable CLK ByPass, Bus Width = 0, Power save Disable + SDIO->CLKCR = tempreg; - //Initialize the SDIO (with initial <400Khz Clock) - tempreg = 0; //Reset value - tempreg |= SDIO_CLKCR_CLKEN; // Clock enabled - tempreg |= SDIO_INIT_CLK_DIV; // Clock Divider. Clock = 48000 / (118 + 2) = 400Khz - // Keep the rest at 0 => HW_Flow Disabled, Rising Clock Edge, Disable CLK ByPass, Bus Width = 0, Power save Disable - SDIO->CLKCR = tempreg; + // Power up the SDIO + SDIO_PowerState_ON(SDIO); + hsd.Instance = SDIO; +} - // Power up the SDIO - SDIO_PowerState_ON(SDIO); - hsd.Instance = SDIO; +void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init + UNUSED(hsd); // Prevent unused argument(s) compilation warning + __HAL_RCC_SDIO_CLK_ENABLE(); // turn on SDIO clock +} + +bool SDIO_Init() { + uint8_t retryCnt = SDIO_READ_RETRIES; + + bool status; + hsd.Instance = SDIO; + hsd.State = HAL_SD_STATE_RESET; + + SD_LowLevel_Init(); + + uint8_t retry_Cnt = retryCnt; + for (;;) { + TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); + status = (bool) HAL_SD_Init(&hsd); + if (!status) break; + if (!--retry_Cnt) return false; // return failing status if retries are exhausted } - void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init - UNUSED(hsd); // Prevent unused argument(s) compilation warning - __HAL_RCC_SDIO_CLK_ENABLE(); // turn on SDIO clock - } + go_to_transfer_speed(); - bool SDIO_Init() { - uint8_t retryCnt = SDIO_READ_RETRIES; - - bool status; - hsd.Instance = SDIO; - hsd.State = HAL_SD_STATE_RESET; - - SD_LowLevel_Init(); - - uint8_t retry_Cnt = retryCnt; + #if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // go to 4 bit wide mode if pins are defined + retry_Cnt = retryCnt; for (;;) { TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); - status = (bool) HAL_SD_Init(&hsd); - if (!status) break; - if (!--retry_Cnt) return false; // return failing status if retries are exhausted + if (!HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B)) break; // some cards are only 1 bit wide so a pass here is not required + if (!--retry_Cnt) break; } - - go_to_transfer_speed(); - - #if PINS_EXIST(SDIO_D1, SDIO_D2, SDIO_D3) // go to 4 bit wide mode if pins are defined + if (!retry_Cnt) { // wide bus failed, go back to one bit wide mode + hsd.State = (HAL_SD_StateTypeDef) 0; // HAL_SD_STATE_RESET + SD_LowLevel_Init(); retry_Cnt = retryCnt; for (;;) { TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); - if (!HAL_SD_ConfigWideBusOperation(&hsd, SDIO_BUS_WIDE_4B)) break; // some cards are only 1 bit wide so a pass here is not required - if (!--retry_Cnt) break; + status = (bool) HAL_SD_Init(&hsd); + if (!status) break; + if (!--retry_Cnt) return false; // return failing status if retries are exhausted } - if (!retry_Cnt) { // wide bus failed, go back to one bit wide mode - hsd.State = (HAL_SD_StateTypeDef) 0; // HAL_SD_STATE_RESET - SD_LowLevel_Init(); - retry_Cnt = retryCnt; - for (;;) { - TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); - status = (bool) HAL_SD_Init(&hsd); - if (!status) break; - if (!--retry_Cnt) return false; // return failing status if retries are exhausted - } - go_to_transfer_speed(); - } - #endif + go_to_transfer_speed(); + } + #endif - return true; + return true; +} + +static bool SDIO_ReadWriteBlock_DMA(uint32_t block, const uint8_t *src, uint8_t *dst) { + if (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) return false; + + TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); + + HAL_StatusTypeDef ret; + if (src) { + hdma_sdio.Init.Direction = DMA_MEMORY_TO_PERIPH; + HAL_DMA_Init(&hdma_sdio); + ret = HAL_SD_WriteBlocks_DMA(&hsd, (uint8_t *)src, block, 1); + } + else { + hdma_sdio.Init.Direction = DMA_PERIPH_TO_MEMORY; + HAL_DMA_Init(&hdma_sdio); + ret = HAL_SD_ReadBlocks_DMA(&hsd, (uint8_t *)dst, block, 1); } - static bool SDIO_ReadWriteBlock_DMA(uint32_t block, const uint8_t *src, uint8_t *dst) { - if (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) return false; + if (ret != HAL_OK) { + HAL_DMA_Abort_IT(&hdma_sdio); + HAL_DMA_DeInit(&hdma_sdio); + return false; + } - TERN_(USE_WATCHDOG, HAL_watchdog_refresh()); - - HAL_StatusTypeDef ret; - if (src) { - hdma_sdio.Init.Direction = DMA_MEMORY_TO_PERIPH; - HAL_DMA_Init(&hdma_sdio); - ret = HAL_SD_WriteBlocks_DMA(&hsd, (uint8_t *)src, block, 1); - } - else { - hdma_sdio.Init.Direction = DMA_PERIPH_TO_MEMORY; - HAL_DMA_Init(&hdma_sdio); - ret = HAL_SD_ReadBlocks_DMA(&hsd, (uint8_t *)dst, block, 1); - } - - if (ret != HAL_OK) { + millis_t timeout = millis() + 500; + // Wait the transfer + while (hsd.State != HAL_SD_STATE_READY) { + if (ELAPSED(millis(), timeout)) { HAL_DMA_Abort_IT(&hdma_sdio); HAL_DMA_DeInit(&hdma_sdio); return false; } - - millis_t timeout = millis() + 500; - // Wait the transfer - while (hsd.State != HAL_SD_STATE_READY) { - if (ELAPSED(millis(), timeout)) { - HAL_DMA_Abort_IT(&hdma_sdio); - HAL_DMA_DeInit(&hdma_sdio); - return false; - } - } - - while (__HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TC_FLAG_INDEX(&hdma_sdio)) != 0 - || __HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TE_FLAG_INDEX(&hdma_sdio)) != 0) { /* nada */ } - - HAL_DMA_Abort_IT(&hdma_sdio); - HAL_DMA_DeInit(&hdma_sdio); - - timeout = millis() + 500; - while (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) if (ELAPSED(millis(), timeout)) return false; - - return true; } - bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) { - uint8_t retries = SDIO_READ_RETRIES; - while (retries--) if (SDIO_ReadWriteBlock_DMA(block, NULL, dst)) return true; - return false; - } + while (__HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TC_FLAG_INDEX(&hdma_sdio)) != 0 + || __HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TE_FLAG_INDEX(&hdma_sdio)) != 0) { /* nada */ } - bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) { - uint8_t retries = SDIO_READ_RETRIES; - while (retries--) if (SDIO_ReadWriteBlock_DMA(block, src, NULL)) return true; - return false; - } + HAL_DMA_Abort_IT(&hdma_sdio); + HAL_DMA_DeInit(&hdma_sdio); - #if defined(STM32F1xx) - #define DMA_IRQ_HANDLER DMA2_Channel4_5_IRQHandler - #elif defined(STM32F4xx) - #define DMA_IRQ_HANDLER DMA2_Stream3_IRQHandler - #else - #error "Unknown STM32 architecture." - #endif + timeout = millis() + 500; + while (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) if (ELAPSED(millis(), timeout)) return false; - extern "C" void SDIO_IRQHandler(void) { HAL_SD_IRQHandler(&hsd); } - extern "C" void DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&hdma_sdio); } + return true; +} + +bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) { + uint8_t retries = SDIO_READ_RETRIES; + while (retries--) if (SDIO_ReadWriteBlock_DMA(block, NULL, dst)) return true; + return false; +} + +bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) { + uint8_t retries = SDIO_READ_RETRIES; + while (retries--) if (SDIO_ReadWriteBlock_DMA(block, src, NULL)) return true; + return false; +} + +bool SDIO_IsReady() { + return hsd.State == HAL_SD_STATE_READY; +} + +uint32_t SDIO_GetCardSize() { + return (uint32_t)(hsd.SdCard.BlockNbr) * (hsd.SdCard.BlockSize); +} + +#if defined(STM32F1xx) + #define DMA_IRQ_HANDLER DMA2_Channel4_5_IRQHandler +#elif defined(STM32F4xx) + #define DMA_IRQ_HANDLER DMA2_Stream3_IRQHandler +#else + #error "Unknown STM32 architecture." +#endif + +extern "C" void SDIO_IRQHandler(void) { HAL_SD_IRQHandler(&hsd); } +extern "C" void DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&hdma_sdio); } -#endif // !USBD_USE_CDC_COMPOSITE #endif // SDIO_SUPPORT -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/Servo.cpp b/Marlin/src/HAL/STM32/Servo.cpp index 1cf117a056..c0a64c5ea9 100644 --- a/Marlin/src/HAL/STM32/Servo.cpp +++ b/Marlin/src/HAL/STM32/Servo.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -107,4 +107,4 @@ void libServo::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriori } #endif // HAS_SERVOS -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/eeprom_flash.cpp b/Marlin/src/HAL/STM32/eeprom_flash.cpp index dfeae9e9e5..05e0d4c420 100644 --- a/Marlin/src/HAL/STM32/eeprom_flash.cpp +++ b/Marlin/src/HAL/STM32/eeprom_flash.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -270,4 +270,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t } #endif // FLASH_EEPROM_EMULATION -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp index f811468fb4..9cab90f109 100644 --- a/Marlin/src/HAL/STM32/eeprom_sdcard.cpp +++ b/Marlin/src/HAL/STM32/eeprom_sdcard.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) /** * Implementation of EEPROM settings in SD Card @@ -88,4 +88,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uin } #endif // SDCARD_EEPROM_EMULATION -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/eeprom_sram.cpp b/Marlin/src/HAL/STM32/eeprom_sram.cpp index 135bcabde9..c391785234 100644 --- a/Marlin/src/HAL/STM32/eeprom_sram.cpp +++ b/Marlin/src/HAL/STM32/eeprom_sram.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -65,4 +65,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t } #endif // SRAM_EEPROM_EMULATION -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/eeprom_wired.cpp b/Marlin/src/HAL/STM32/eeprom_wired.cpp index 6aa2f1d360..3346abbe4a 100644 --- a/Marlin/src/HAL/STM32/eeprom_wired.cpp +++ b/Marlin/src/HAL/STM32/eeprom_wired.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -75,4 +75,4 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t } #endif // USE_WIRED_EEPROM -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/fast_pwm.cpp b/Marlin/src/HAL/STM32/fast_pwm.cpp index 42eecb5e1a..eaffb8cfa4 100644 --- a/Marlin/src/HAL/STM32/fast_pwm.cpp +++ b/Marlin/src/HAL/STM32/fast_pwm.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfigPre.h" @@ -56,4 +56,4 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255 } #endif // NEEDS_HARDWARE_PWM -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/fastio.cpp b/Marlin/src/HAL/STM32/fastio.cpp index 0d55579d88..5056e99d35 100644 --- a/Marlin/src/HAL/STM32/fastio.cpp +++ b/Marlin/src/HAL/STM32/fastio.cpp @@ -20,7 +20,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -31,4 +31,4 @@ void FastIO_init() { FastIOPortMap[STM_PORT(digitalPin[i])] = get_GPIO_Port(STM_PORT(digitalPin[i])); } -#endif +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/msc_sd.cpp b/Marlin/src/HAL/STM32/msc_sd.cpp index 64f2533002..70a719d665 100644 --- a/Marlin/src/HAL/STM32/msc_sd.cpp +++ b/Marlin/src/HAL/STM32/msc_sd.cpp @@ -13,21 +13,24 @@ * along with this program. If not, see . * */ +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) + #include "../../inc/MarlinConfigPre.h" -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && HAS_SD_HOST_DRIVE +#if HAS_SD_HOST_DRIVE -#include "msc_sd.h" #include "../shared/Marduino.h" +#include "msc_sd.h" #include "usbd_core.h" + +#include "../../sd/cardreader.h" + #include #include #define BLOCK_SIZE 512 #define PRODUCT_ID 0x29 -#include "../../sd/cardreader.h" - class Sd2CardUSBMscHandler : public USBMscHandler { public: DiskIODriver* diskIODriver() { @@ -121,4 +124,5 @@ void MSC_SD_init() { USBDevice.begin(); } -#endif // __STM32F1__ && HAS_SD_HOST_DRIVE +#endif // HAS_SD_HOST_DRIVE +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/tft/gt911.cpp b/Marlin/src/HAL/STM32/tft/gt911.cpp index f99fa46e19..8c59a60f92 100644 --- a/Marlin/src/HAL/STM32/tft/gt911.cpp +++ b/Marlin/src/HAL/STM32/tft/gt911.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../../inc/MarlinConfig.h" @@ -199,4 +199,4 @@ bool GT911::getPoint(int16_t *x, int16_t *y) { } #endif // TFT_TOUCH_DEVICE_GT911 -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp index 87ca2dbbe1..f349eacac3 100644 --- a/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_fsmc.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../../inc/MarlinConfig.h" @@ -178,4 +178,4 @@ void TFT_FSMC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Cou } #endif // HAS_FSMC_TFT -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp index f2509ce5e4..53e5bd83e0 100644 --- a/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_ltdc.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../../inc/MarlinConfig.h" @@ -384,4 +384,4 @@ void TFT_LTDC::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Cou } #endif // HAS_LTDC_TFT -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/tft/tft_spi.cpp b/Marlin/src/HAL/STM32/tft/tft_spi.cpp index 6bfce81f1a..4e3f894a52 100644 --- a/Marlin/src/HAL/STM32/tft/tft_spi.cpp +++ b/Marlin/src/HAL/STM32/tft/tft_spi.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../../inc/MarlinConfig.h" @@ -240,4 +240,4 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun } #endif // HAS_SPI_TFT -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/tft/xpt2046.cpp b/Marlin/src/HAL/STM32/tft/xpt2046.cpp index dffeb6aaf7..d50c24d177 100644 --- a/Marlin/src/HAL/STM32/tft/xpt2046.cpp +++ b/Marlin/src/HAL/STM32/tft/xpt2046.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../../inc/MarlinConfig.h" @@ -167,4 +167,4 @@ uint16_t XPT2046::SoftwareIO(uint16_t data) { } #endif // HAS_TFT_XPT2046 -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/timers.cpp b/Marlin/src/HAL/STM32/timers.cpp index 03353c2ca3..7806198180 100644 --- a/Marlin/src/HAL/STM32/timers.cpp +++ b/Marlin/src/HAL/STM32/timers.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -319,4 +319,4 @@ static constexpr bool verify_no_timer_conflicts() { // when hovering over it, making it easy to identify the conflicting timers. static_assert(verify_no_timer_conflicts(), "One or more timer conflict detected. Examine \"timers_in_use\" to help identify conflict."); -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/usb_host.cpp b/Marlin/src/HAL/STM32/usb_host.cpp index 8fa49ccbcc..e45ab560e6 100644 --- a/Marlin/src/HAL/STM32/usb_host.cpp +++ b/Marlin/src/HAL/STM32/usb_host.cpp @@ -20,7 +20,7 @@ * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfig.h" @@ -114,4 +114,4 @@ uint8_t BulkStorage::Write(uint8_t lun, uint32_t addr, uint16_t bsize, uint8_t b } #endif // USE_OTG_USB_HOST && USBHOST -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/usb_serial.cpp b/Marlin/src/HAL/STM32/usb_serial.cpp index 705d649ff5..0e23175fc0 100644 --- a/Marlin/src/HAL/STM32/usb_serial.cpp +++ b/Marlin/src/HAL/STM32/usb_serial.cpp @@ -16,7 +16,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfigPre.h" @@ -51,4 +51,4 @@ void USB_Hook_init() { } #endif // EMERGENCY_PARSER && USBD_USE_CDC -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32/watchdog.cpp b/Marlin/src/HAL/STM32/watchdog.cpp index aad0a79a0c..09b403e7f2 100644 --- a/Marlin/src/HAL/STM32/watchdog.cpp +++ b/Marlin/src/HAL/STM32/watchdog.cpp @@ -19,7 +19,7 @@ * along with this program. If not, see . * */ -#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #include "../../inc/MarlinConfigPre.h" @@ -46,4 +46,4 @@ void HAL_watchdog_refresh() { } #endif // USE_WATCHDOG -#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC +#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC && !MAPLE_STM32F1 diff --git a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp index 784a80c29f..f1cd6b3730 100644 --- a/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp +++ b/Marlin/src/HAL/STM32F1/dogm/u8g_com_stm32duino_swspi.cpp @@ -22,7 +22,7 @@ #if BOTH(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI) -#include +#include #include "../../shared/HAL_SPI.h" #ifndef LCD_SPI_SPEED diff --git a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h index 89ee66d646..2846155c35 100644 --- a/Marlin/src/HAL/STM32F1/inc/SanityCheck.h +++ b/Marlin/src/HAL/STM32F1/inc/SanityCheck.h @@ -39,7 +39,7 @@ #error "SERIAL_STATS_DROPPED_RX is not supported on the STM32F1 platform." #endif -#if ENABLED(NEOPIXEL_LED) +#if ENABLED(NEOPIXEL_LED) && DISABLED(MKS_MINI_12864_V3) #error "NEOPIXEL_LED (Adafruit NeoPixel) is not supported for HAL/STM32F1. Comment out this line to proceed at your own risk!" #endif diff --git a/Marlin/src/HAL/STM32F1/msc_sd.cpp b/Marlin/src/HAL/STM32F1/msc_sd.cpp index 7725b2c324..f490c83ed8 100644 --- a/Marlin/src/HAL/STM32F1/msc_sd.cpp +++ b/Marlin/src/HAL/STM32F1/msc_sd.cpp @@ -13,9 +13,11 @@ * along with this program. If not, see . * */ +#ifdef __STM32F1__ + #include "../../inc/MarlinConfigPre.h" -#if defined(__STM32F1__) && HAS_SD_HOST_DRIVE +#if HAS_SD_HOST_DRIVE #include "msc_sd.h" #include "SPI.h" @@ -92,4 +94,5 @@ void MSC_SD_init() { #endif } -#endif // __STM32F1__ && HAS_SD_HOST_DRIVE +#endif // HAS_SD_HOST_DRIVE +#endif // __STM32F1__ diff --git a/Marlin/src/HAL/STM32F1/sdio.cpp b/Marlin/src/HAL/STM32F1/sdio.cpp index ffa6db1206..6e41d2cbf1 100644 --- a/Marlin/src/HAL/STM32F1/sdio.cpp +++ b/Marlin/src/HAL/STM32F1/sdio.cpp @@ -184,6 +184,10 @@ bool SDIO_WriteBlock(uint32_t blockAddress, const uint8_t *data) { inline uint32_t SDIO_GetCardState() { return SDIO_CmdSendStatus(SdCard.RelCardAdd << 16U) ? (SDIO_GetResponse(SDIO_RESP1) >> 9U) & 0x0FU : SDIO_CARD_ERROR; } +// No F1 board with SDIO + MSC using Maple, that I aware of... +bool SDIO_IsReady() { return true; } +uint32_t SDIO_GetCardSize() { return 0; } + // ------------------------ // SD Commands and Responses // ------------------------ diff --git a/Marlin/src/HAL/shared/Delay.h b/Marlin/src/HAL/shared/Delay.h index f7e01ad25c..3174968c1b 100644 --- a/Marlin/src/HAL/shared/Delay.h +++ b/Marlin/src/HAL/shared/Delay.h @@ -97,43 +97,65 @@ void calibrate_delay_loop(); #define DELAY_US(x) DelayCycleFnc((x) * ((F_CPU) / 1000000UL)) #elif defined(__AVR__) - - #define nop() __asm__ __volatile__("nop;\n\t":::) - - FORCE_INLINE static void __delay_4cycles(uint8_t cy) { - __asm__ __volatile__( - L("1") - A("dec %[cnt]") - A("nop") - A("brne 1b") - : [cnt] "+r"(cy) // output: +r means input+output - : // input: - : "cc" // clobbers: - ); + FORCE_INLINE static void __delay_up_to_3c(uint8_t cycles) { + switch (cycles) { + case 3: + __asm__ __volatile__(A("RJMP .+0") A("NOP")); + break; + case 2: + __asm__ __volatile__(A("RJMP .+0")); + break; + case 1: + __asm__ __volatile__(A("NOP")); + break; + } } // Delay in cycles - FORCE_INLINE static void DELAY_CYCLES(uint16_t x) { - - if (__builtin_constant_p(x)) { - #define MAXNOPS 4 - - if (x <= (MAXNOPS)) { - switch (x) { case 4: nop(); case 3: nop(); case 2: nop(); case 1: nop(); } + FORCE_INLINE static void DELAY_CYCLES(uint16_t cycles) { + if (__builtin_constant_p(cycles)) { + if (cycles <= 3) { + __delay_up_to_3c(cycles); + } + else if (cycles == 4) { + __delay_up_to_3c(2); + __delay_up_to_3c(2); } else { - const uint32_t rem = (x) % (MAXNOPS); - switch (rem) { case 3: nop(); case 2: nop(); case 1: nop(); } - if ((x = (x) / (MAXNOPS))) - __delay_4cycles(x); // if need more then 4 nop loop is more optimal - } + cycles -= 1 + 4; // Compensate for the first LDI (1) and the first round (4) + __delay_up_to_3c(cycles % 4); - #undef MAXNOPS + cycles /= 4; + // The following code burns [1 + 4 * (rounds+1)] cycles + uint16_t dummy; + __asm__ __volatile__( + // "manually" load counter from constants, otherwise the compiler may optimize this part away + A("LDI %A[rounds], %[l]") // 1c + A("LDI %B[rounds], %[h]") // 1c (compensating the non branching BRCC) + L("1") + A("SBIW %[rounds], 1") // 2c + A("BRCC 1b") // 2c when branching, else 1c (end of loop) + : // Outputs ... + [rounds] "=w" (dummy) // Restrict to a wo (=) 16 bit register pair (w) + : // Inputs ... + [l] "M" (cycles%256), // Restrict to 0..255 constant (M) + [h] "M" (cycles/256) // Restrict to 0..255 constant (M) + :// Clobbers ... + "cc" // Indicate we are modifying flags like Carry (cc) + ); + } + } + else { + __asm__ __volatile__( + L("1") + A("SBIW %[cycles], 4") // 2c + A("BRCC 1b") // 2c when branching, else 1c (end of loop) + : [cycles] "+w" (cycles) // output: Restrict to a rw (+) 16 bit register pair (w) + : // input: - + : "cc" // clobbers: We are modifying flags like Carry (cc) + ); } - else if ((x >>= 2)) - __delay_4cycles(x); } - #undef nop // Delay in microseconds #define DELAY_US(x) DELAY_CYCLES((x) * ((F_CPU) / 1000000UL)) diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp index dc9fbb2ba7..07a6a31b94 100644 --- a/Marlin/src/MarlinCore.cpp +++ b/Marlin/src/MarlinCore.cpp @@ -70,7 +70,7 @@ #if HAS_TFT_LVGL_UI #include "lcd/extui/mks_ui/tft_lvgl_configuration.h" #include "lcd/extui/mks_ui/draw_ui.h" - #include "lcd/extui/mks_ui/mks_hardware_test.h" + #include "lcd/extui/mks_ui/mks_hardware.h" #include #endif @@ -135,7 +135,7 @@ #include "module/servo.h" #endif -#if ENABLED(HAS_MOTOR_CURRENT_DAC) +#if HAS_MOTOR_CURRENT_DAC #include "feature/dac/stepper_dac.h" #endif @@ -236,6 +236,10 @@ #include "feature/stepper_driver_safety.h" #endif +#if ENABLED(PSU_CONTROL) + #include "feature/power.h" +#endif + PGMSTR(M112_KILL_STR, "M112 Shutdown"); MarlinState marlin_state = MF_INITIALIZING; @@ -510,7 +514,6 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) { constexpr millis_t HOME_DEBOUNCE_DELAY = 1000UL; static millis_t next_home_key_ms; // = 0 if (!IS_SD_PRINTING() && !READ(HOME_PIN)) { // HOME_PIN goes LOW when pressed - const millis_t ms = millis(); if (ELAPSED(ms, next_home_key_ms)) { next_home_key_ms = ms + HOME_DEBOUNCE_DELAY; LCD_MESSAGEPGM(MSG_AUTO_HOME); @@ -522,95 +525,147 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) { #if ENABLED(CUSTOM_USER_BUTTONS) // Handle a custom user button if defined const bool printer_not_busy = !printingIsActive(); - #define HAS_CUSTOM_USER_BUTTON(N) (PIN_EXISTS(BUTTON##N) && defined(BUTTON##N##_HIT_STATE) && defined(BUTTON##N##_GCODE) && defined(BUTTON##N##_DESC)) - #define CHECK_CUSTOM_USER_BUTTON(N) do{ \ + #define HAS_CUSTOM_USER_BUTTON(N) (PIN_EXISTS(BUTTON##N) && defined(BUTTON##N##_HIT_STATE) && defined(BUTTON##N##_GCODE)) + #define HAS_BETTER_USER_BUTTON(N) HAS_CUSTOM_USER_BUTTON(N) && defined(BUTTON##N##_DESC) + #define _CHECK_CUSTOM_USER_BUTTON(N, CODE) do{ \ constexpr millis_t CUB_DEBOUNCE_DELAY_##N = 250UL; \ static millis_t next_cub_ms_##N; \ if (BUTTON##N##_HIT_STATE == READ(BUTTON##N##_PIN) \ && (ENABLED(BUTTON##N##_WHEN_PRINTING) || printer_not_busy)) { \ - const millis_t ms = millis(); \ if (ELAPSED(ms, next_cub_ms_##N)) { \ next_cub_ms_##N = ms + CUB_DEBOUNCE_DELAY_##N; \ - if (strlen(BUTTON##N##_DESC)) \ - LCD_MESSAGEPGM_P(PSTR(BUTTON##N##_DESC)); \ + CODE; \ queue.inject_P(PSTR(BUTTON##N##_GCODE)); \ } \ } \ }while(0) - #if HAS_CUSTOM_USER_BUTTON(1) + #define CHECK_CUSTOM_USER_BUTTON(N) _CHECK_CUSTOM_USER_BUTTON(N, NOOP) + #define CHECK_BETTER_USER_BUTTON(N) _CHECK_CUSTOM_USER_BUTTON(N, if (strlen(BUTTON##N##_DESC)) LCD_MESSAGEPGM_P(PSTR(BUTTON##N##_DESC))) + + #if HAS_BETTER_USER_BUTTON(1) + CHECK_BETTER_USER_BUTTON(1); + #elif HAS_CUSTOM_USER_BUTTON(1) CHECK_CUSTOM_USER_BUTTON(1); #endif - #if HAS_CUSTOM_USER_BUTTON(2) + #if HAS_BETTER_USER_BUTTON(2) + CHECK_BETTER_USER_BUTTON(2); + #elif HAS_CUSTOM_USER_BUTTON(2) CHECK_CUSTOM_USER_BUTTON(2); #endif - #if HAS_CUSTOM_USER_BUTTON(3) + #if HAS_BETTER_USER_BUTTON(3) + CHECK_BETTER_USER_BUTTON(3); + #elif HAS_CUSTOM_USER_BUTTON(3) CHECK_CUSTOM_USER_BUTTON(3); #endif - #if HAS_CUSTOM_USER_BUTTON(4) + #if HAS_BETTER_USER_BUTTON(4) + CHECK_BETTER_USER_BUTTON(4); + #elif HAS_CUSTOM_USER_BUTTON(4) CHECK_CUSTOM_USER_BUTTON(4); #endif - #if HAS_CUSTOM_USER_BUTTON(5) + #if HAS_BETTER_USER_BUTTON(5) + CHECK_BETTER_USER_BUTTON(5); + #elif HAS_CUSTOM_USER_BUTTON(5) CHECK_CUSTOM_USER_BUTTON(5); #endif - #if HAS_CUSTOM_USER_BUTTON(6) + #if HAS_BETTER_USER_BUTTON(6) + CHECK_BETTER_USER_BUTTON(6); + #elif HAS_CUSTOM_USER_BUTTON(6) CHECK_CUSTOM_USER_BUTTON(6); #endif - #if HAS_CUSTOM_USER_BUTTON(7) + #if HAS_BETTER_USER_BUTTON(7) + CHECK_BETTER_USER_BUTTON(7); + #elif HAS_CUSTOM_USER_BUTTON(7) CHECK_CUSTOM_USER_BUTTON(7); #endif - #if HAS_CUSTOM_USER_BUTTON(8) + #if HAS_BETTER_USER_BUTTON(8) + CHECK_BETTER_USER_BUTTON(8); + #elif HAS_CUSTOM_USER_BUTTON(8) CHECK_CUSTOM_USER_BUTTON(8); #endif - #if HAS_CUSTOM_USER_BUTTON(9) + #if HAS_BETTER_USER_BUTTON(9) + CHECK_BETTER_USER_BUTTON(9); + #elif HAS_CUSTOM_USER_BUTTON(9) CHECK_CUSTOM_USER_BUTTON(9); #endif - #if HAS_CUSTOM_USER_BUTTON(10) + #if HAS_BETTER_USER_BUTTON(10) + CHECK_BETTER_USER_BUTTON(10); + #elif HAS_CUSTOM_USER_BUTTON(10) CHECK_CUSTOM_USER_BUTTON(10); #endif - #if HAS_CUSTOM_USER_BUTTON(11) + #if HAS_BETTER_USER_BUTTON(11) + CHECK_BETTER_USER_BUTTON(11); + #elif HAS_CUSTOM_USER_BUTTON(11) CHECK_CUSTOM_USER_BUTTON(11); #endif - #if HAS_CUSTOM_USER_BUTTON(12) + #if HAS_BETTER_USER_BUTTON(12) + CHECK_BETTER_USER_BUTTON(12); + #elif HAS_CUSTOM_USER_BUTTON(12) CHECK_CUSTOM_USER_BUTTON(12); #endif - #if HAS_CUSTOM_USER_BUTTON(13) + #if HAS_BETTER_USER_BUTTON(13) + CHECK_BETTER_USER_BUTTON(13); + #elif HAS_CUSTOM_USER_BUTTON(13) CHECK_CUSTOM_USER_BUTTON(13); #endif - #if HAS_CUSTOM_USER_BUTTON(14) + #if HAS_BETTER_USER_BUTTON(14) + CHECK_BETTER_USER_BUTTON(14); + #elif HAS_CUSTOM_USER_BUTTON(14) CHECK_CUSTOM_USER_BUTTON(14); #endif - #if HAS_CUSTOM_USER_BUTTON(15) + #if HAS_BETTER_USER_BUTTON(15) + CHECK_BETTER_USER_BUTTON(15); + #elif HAS_CUSTOM_USER_BUTTON(15) CHECK_CUSTOM_USER_BUTTON(15); #endif - #if HAS_CUSTOM_USER_BUTTON(16) + #if HAS_BETTER_USER_BUTTON(16) + CHECK_BETTER_USER_BUTTON(16); + #elif HAS_CUSTOM_USER_BUTTON(16) CHECK_CUSTOM_USER_BUTTON(16); #endif - #if HAS_CUSTOM_USER_BUTTON(17) + #if HAS_BETTER_USER_BUTTON(17) + CHECK_BETTER_USER_BUTTON(17); + #elif HAS_CUSTOM_USER_BUTTON(17) CHECK_CUSTOM_USER_BUTTON(17); #endif - #if HAS_CUSTOM_USER_BUTTON(18) + #if HAS_BETTER_USER_BUTTON(18) + CHECK_BETTER_USER_BUTTON(18); + #elif HAS_CUSTOM_USER_BUTTON(18) CHECK_CUSTOM_USER_BUTTON(18); #endif - #if HAS_CUSTOM_USER_BUTTON(19) + #if HAS_BETTER_USER_BUTTON(19) + CHECK_BETTER_USER_BUTTON(19); + #elif HAS_CUSTOM_USER_BUTTON(19) CHECK_CUSTOM_USER_BUTTON(19); #endif - #if HAS_CUSTOM_USER_BUTTON(20) + #if HAS_BETTER_USER_BUTTON(20) + CHECK_BETTER_USER_BUTTON(20); + #elif HAS_CUSTOM_USER_BUTTON(20) CHECK_CUSTOM_USER_BUTTON(20); #endif - #if HAS_CUSTOM_USER_BUTTON(21) + #if HAS_BETTER_USER_BUTTON(21) + CHECK_BETTER_USER_BUTTON(21); + #elif HAS_CUSTOM_USER_BUTTON(21) CHECK_CUSTOM_USER_BUTTON(21); #endif - #if HAS_CUSTOM_USER_BUTTON(22) + #if HAS_BETTER_USER_BUTTON(22) + CHECK_BETTER_USER_BUTTON(22); + #elif HAS_CUSTOM_USER_BUTTON(22) CHECK_CUSTOM_USER_BUTTON(22); #endif - #if HAS_CUSTOM_USER_BUTTON(23) + #if HAS_BETTER_USER_BUTTON(23) + CHECK_BETTER_USER_BUTTON(23); + #elif HAS_CUSTOM_USER_BUTTON(23) CHECK_CUSTOM_USER_BUTTON(23); #endif - #if HAS_CUSTOM_USER_BUTTON(24) + #if HAS_BETTER_USER_BUTTON(24) + CHECK_BETTER_USER_BUTTON(24); + #elif HAS_CUSTOM_USER_BUTTON(24) CHECK_CUSTOM_USER_BUTTON(24); #endif - #if HAS_CUSTOM_USER_BUTTON(25) + #if HAS_BETTER_USER_BUTTON(25) + CHECK_BETTER_USER_BUTTON(25); + #elif HAS_CUSTOM_USER_BUTTON(25) CHECK_CUSTOM_USER_BUTTON(25); #endif #endif @@ -771,10 +826,8 @@ void idle(bool no_stepper_sleep/*=false*/) { // Run StallGuard endstop checks #if ENABLED(SPI_ENDSTOPS) - if (endstops.tmc_spi_homing.any - && TERN1(IMPROVE_HOMING_RELIABILITY, ELAPSED(millis(), sg_guard_period)) - ) LOOP_L_N(i, 4) // Read SGT 4 times per idle loop - if (endstops.tmc_spi_homing_check()) break; + if (endstops.tmc_spi_homing.any && TERN1(IMPROVE_HOMING_RELIABILITY, ELAPSED(millis(), sg_guard_period))) + LOOP_L_N(i, 4) if (endstops.tmc_spi_homing_check()) break; // Read SGT 4 times per idle loop #endif // Handle SD Card insert / remove @@ -883,18 +936,18 @@ void minkill(const bool steppers_off/*=false*/) { // Power off all steppers (for M112) or just the E steppers steppers_off ? disable_all_steppers() : disable_e_steppers(); - TERN_(PSU_CONTROL, PSU_OFF()); + TERN_(PSU_CONTROL, powerManager.power_off()); TERN_(HAS_SUICIDE, suicide()); #if EITHER(HAS_KILL, SOFT_RESET_ON_KILL) // Wait for both KILL and ENC to be released - while (TERN0(HAS_KILL, !kill_state()) || TERN0(SOFT_RESET_ON_KILL, !ui.button_pressed())) + while (TERN0(HAS_KILL, kill_state()) || TERN0(SOFT_RESET_ON_KILL, ui.button_pressed())) watchdog_refresh(); - // Wait for either KILL or ENC press - while (TERN1(HAS_KILL, kill_state()) && TERN1(SOFT_RESET_ON_KILL, ui.button_pressed())) + // Wait for either KILL or ENC to be pressed again + while (TERN1(HAS_KILL, !kill_state()) && TERN1(SOFT_RESET_ON_KILL, !ui.button_pressed())) watchdog_refresh(); // Reboot the board @@ -1156,22 +1209,15 @@ void setup() { #endif #endif - #if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) - mks_esp_wifi_init(); - WIFISERIAL.begin(WIFI_BAUDRATE); - serial_connect_timeout = millis() + 1000UL; - while (/*!WIFISERIAL && */PENDING(millis(), serial_connect_timeout)) { /*nada*/ } - #endif - TERN_(DYNAMIC_VECTORTABLE, hook_cpu_exceptions()); // If supported, install Marlin exception handlers at runtime SETUP_RUN(HAL_init()); // Init and disable SPI thermocouples; this is still needed - #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0) + #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0)) OUT_WRITE(TEMP_0_CS_PIN, HIGH); // Disable #endif - #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) OUT_WRITE(TEMP_1_CS_PIN, HIGH); #endif @@ -1189,8 +1235,7 @@ void setup() { #if ENABLED(PSU_CONTROL) SETUP_LOG("PSU_CONTROL"); - powersupply_on = ENABLED(PSU_DEFAULT_OFF); - if (ENABLED(PSU_DEFAULT_OFF)) PSU_OFF(); else PSU_ON(); + powerManager.init(); #endif #if ENABLED(POWER_LOSS_RECOVERY) @@ -1228,9 +1273,7 @@ void setup() { if (mcu & RST_SOFTWARE) SERIAL_ECHOLNPGM(STR_SOFTWARE_RESET); HAL_clear_reset_source(); - SERIAL_ECHOPGM_P(GET_TEXT(MSG_MARLIN)); - SERIAL_CHAR(' '); - SERIAL_ECHOLNPGM(SHORT_BUILD_VERSION); + SERIAL_ECHOLNPGM("Marlin " SHORT_BUILD_VERSION); SERIAL_EOL(); #if defined(STRING_DISTRIBUTION_DATE) && defined(STRING_CONFIG_H_AUTHOR) SERIAL_ECHO_MSG( @@ -1355,7 +1398,7 @@ void setup() { SETUP_RUN(digipot_i2c.init()); #endif - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC SETUP_RUN(stepper_dac.init()); #endif diff --git a/Marlin/src/MarlinCore.h b/Marlin/src/MarlinCore.h index 243811d7fb..d7ab11d046 100644 --- a/Marlin/src/MarlinCore.h +++ b/Marlin/src/MarlinCore.h @@ -81,25 +81,6 @@ extern bool wait_for_heatup; void wait_for_user_response(millis_t ms=0, const bool no_sleep=false); #endif -#if ENABLED(PSU_CONTROL) - extern bool powersupply_on; - #define PSU_PIN_ON() do{ OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE); powersupply_on = true; }while(0) - #define PSU_PIN_OFF() do{ OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE); powersupply_on = false; }while(0) - #if ENABLED(AUTO_POWER_CONTROL) - #define PSU_ON() powerManager.power_on() - #define PSU_OFF() powerManager.power_off() - #define PSU_OFF_SOON() powerManager.power_off_soon() - #else - #define PSU_ON() PSU_PIN_ON() - #if ENABLED(PS_OFF_SOUND) - #define PSU_OFF() do{ BUZZ(1000, 659); PSU_PIN_OFF(); }while(0) - #else - #define PSU_OFF() PSU_PIN_OFF() - #endif - #define PSU_OFF_SOON PSU_OFF - #endif -#endif - bool pin_is_protected(const pin_t pin); #if HAS_SUICIDE diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h index 9dc951e229..b5b33692a0 100644 --- a/Marlin/src/core/boards.h +++ b/Marlin/src/core/boards.h @@ -249,7 +249,7 @@ #define BOARD_BTT_SKR_V1_4_TURBO 2508 // BigTreeTech SKR v1.4 TURBO (Power outputs: Hotend0, Hotend1, Fan, Bed) #define BOARD_MKS_SGEN_L_V2 2509 // MKS SGEN_L V2 (Power outputs: Hotend0, Hotend1, Bed, Fan) #define BOARD_BTT_SKR_E3_TURBO 2510 // BigTreeTech SKR E3 Turbo (Power outputs: Hotend0, Hotend1, Bed, Fan0, Fan1) -#define BOARD_FLY_CDY 2511 // FLY_CDY (Power outputs: Hotend0, Hotend1, Hotend2, Bed, Fan0, Fan1, Fan2) +#define BOARD_FLY_CDY 2511 // FLYmaker FLY CDY (Power outputs: Hotend0, Hotend1, Hotend2, Bed, Fan0, Fan1, Fan2) // // SAM3X8E ARM Cortex M3 @@ -333,18 +333,19 @@ #define BOARD_CCROBOT_MEEB_3DP 4035 // ccrobot-online.com MEEB_3DP (STM32F103RC) #define BOARD_CHITU3D_V5 4036 // Chitu3D TronXY X5SA V5 Board #define BOARD_CHITU3D_V6 4037 // Chitu3D TronXY X5SA V6 Board -#define BOARD_CREALITY_V4 4038 // Creality v4.x (STM32F103RE) -#define BOARD_CREALITY_V427 4039 // Creality v4.2.7 (STM32F103RE) -#define BOARD_CREALITY_V4210 4040 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 -#define BOARD_CREALITY_V431 4041 // Creality v4.3.1 (STM32F103RE) -#define BOARD_CREALITY_V452 4042 // Creality v4.5.2 (STM32F103RE) -#define BOARD_CREALITY_V453 4043 // Creality v4.5.3 (STM32F103RE) -#define BOARD_TRIGORILLA_PRO 4044 // Trigorilla Pro (STM32F103ZET6) -#define BOARD_FLY_MINI 4045 // FLY MINI (STM32F103RCT6) -#define BOARD_FLSUN_HISPEED 4046 // FLSUN HiSpeedV1 (STM32F103VET6) -#define BOARD_BEAST 4047 // STM32F103RET6 Libmaple-based controller -#define BOARD_MINGDA_MPX_ARM_MINI 4048 // STM32F103ZET6 Mingda MD-16 -#define BOARD_GTM32_PRO_VD 4049 // STM32F103VET6 controller +#define BOARD_CHITU3D_V9 4038 // Chitu3D TronXY X5SA V9 Board +#define BOARD_CREALITY_V4 4039 // Creality v4.x (STM32F103RE) +#define BOARD_CREALITY_V427 4040 // Creality v4.2.7 (STM32F103RE) +#define BOARD_CREALITY_V4210 4041 // Creality v4.2.10 (STM32F103RE) as found in the CR-30 +#define BOARD_CREALITY_V431 4042 // Creality v4.3.1 (STM32F103RE) +#define BOARD_CREALITY_V452 4043 // Creality v4.5.2 (STM32F103RE) +#define BOARD_CREALITY_V453 4044 // Creality v4.5.3 (STM32F103RE) +#define BOARD_TRIGORILLA_PRO 4045 // Trigorilla Pro (STM32F103ZET6) +#define BOARD_FLY_MINI 4046 // FLYmaker FLY MINI (STM32F103RCT6) +#define BOARD_FLSUN_HISPEED 4047 // FLSUN HiSpeedV1 (STM32F103VET6) +#define BOARD_BEAST 4048 // STM32F103RET6 Libmaple-based controller +#define BOARD_MINGDA_MPX_ARM_MINI 4049 // STM32F103ZET6 Mingda MD-16 +#define BOARD_GTM32_PRO_VD 4050 // STM32F103VET6 controller // // ARM Cortex-M4F @@ -380,7 +381,7 @@ #define BOARD_FYSETC_S6 4220 // FYSETC S6 (STM32F446VET6) #define BOARD_FYSETC_S6_V2_0 4221 // FYSETC S6 v2.0 (STM32F446VET6) #define BOARD_FYSETC_SPIDER 4222 // FYSETC Spider (STM32F446VET6) -#define BOARD_FLYF407ZG 4223 // FLYF407ZG (STM32F407ZG) +#define BOARD_FLYF407ZG 4223 // FLYmaker FLYF407ZG (STM32F407ZG) #define BOARD_MKS_ROBIN2 4224 // MKS_ROBIN2 (STM32F407ZE) #define BOARD_MKS_ROBIN_PRO_V2 4225 // MKS Robin Pro V2 (STM32F407VE) #define BOARD_MKS_ROBIN_NANO_V3 4226 // MKS Robin Nano V3 (STM32F407VG) diff --git a/Marlin/src/core/language.h b/Marlin/src/core/language.h index 8e97ec66a9..8de8397593 100644 --- a/Marlin/src/core/language.h +++ b/Marlin/src/core/language.h @@ -231,6 +231,9 @@ #define STR_HEATER_BED "bed" #define STR_HEATER_CHAMBER "chamber" #define STR_COOLER "cooler" +#define STR_MOTHERBOARD "motherboard" +#define STR_PROBE "probe" +#define STR_REDUNDANT "redundant " #define STR_LASER_TEMP "laser temperature" #define STR_STOPPED_HEATER ", system stopped! Heater_ID: " diff --git a/Marlin/src/core/macros.h b/Marlin/src/core/macros.h index 05640bce87..abcd7b9480 100644 --- a/Marlin/src/core/macros.h +++ b/Marlin/src/core/macros.h @@ -442,7 +442,7 @@ return contains(str, '/') ? findLastPos(findStringEnd(str), '/') : str; } - // Find the first occurence of a character in a string (or return the last position in the string) + // Find the first occurrence of a character in a string (or return the last position in the string) constexpr const char* findFirst(const char *str, const char ch) { return *str == ch || *str == 0 ? (str + 1) : findFirst(str + 1, ch); } diff --git a/Marlin/src/core/multi_language.h b/Marlin/src/core/multi_language.h index 5a26edf8d4..1eaef69305 100644 --- a/Marlin/src/core/multi_language.h +++ b/Marlin/src/core/multi_language.h @@ -42,15 +42,12 @@ typedef const char Language_Str[]; #ifndef LCD_LANGUAGE_2 #define LCD_LANGUAGE_2 LCD_LANGUAGE #endif - #ifndef LCD_LANGUAGE_3 #define LCD_LANGUAGE_3 LCD_LANGUAGE_2 #endif - #ifndef LCD_LANGUAGE_4 #define LCD_LANGUAGE_4 LCD_LANGUAGE_3 #endif - #ifndef LCD_LANGUAGE_5 #define LCD_LANGUAGE_5 LCD_LANGUAGE_4 #endif diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp index e144390c8d..f8e446cf81 100644 --- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp +++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp @@ -307,7 +307,7 @@ void unified_bed_leveling::G29() { const uint8_t p_val = parser.byteval('P'); const bool may_move = p_val == 1 || p_val == 2 || p_val == 4 || parser.seen_test('J'); - #if ENABLED(HAS_MULTI_HOTEND) + #if HAS_MULTI_HOTEND const uint8_t old_tool_index = active_extruder; #endif @@ -916,11 +916,11 @@ void set_message_with_feedback(PGM_P const msg_P) { if (do_ubl_mesh_map) display_map(param.T_map_type); // Show user where we're probing if (parser.seen_test('B')) { - SERIAL_ECHOPGM_P(GET_TEXT(MSG_UBL_BC_INSERT)); + SERIAL_ECHOPGM("Place Shim & Measure"); LCD_MESSAGEPGM(MSG_UBL_BC_INSERT); } else { - SERIAL_ECHOPGM_P(GET_TEXT(MSG_UBL_BC_INSERT2)); + SERIAL_ECHOPGM("Measure"); LCD_MESSAGEPGM(MSG_UBL_BC_INSERT2); } diff --git a/Marlin/src/feature/controllerfan.cpp b/Marlin/src/feature/controllerfan.cpp index 0206467752..35f567fa8f 100644 --- a/Marlin/src/feature/controllerfan.cpp +++ b/Marlin/src/feature/controllerfan.cpp @@ -76,9 +76,14 @@ void ControllerFan::update() { ) ); - // If any of the drivers or the heated bed are enabled... - if (motor_on || TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0)) - lastMotorOn = ms; //... set time to NOW so the fan will turn on + // If any triggers for the controller fan are true... + // - At least one stepper driver is enabled + // - The heated bed is enabled + // - TEMP_SENSOR_BOARD is reporting >= CONTROLLER_FAN_MIN_BOARD_TEMP + if ( motor_on + || TERN0(HAS_HEATED_BED, thermalManager.temp_bed.soft_pwm_amount > 0) + || TERN0(HAS_CONTROLLER_FAN_MIN_BOARD_TEMP, thermalManager.wholeDegBoard() >= CONTROLLER_FAN_MIN_BOARD_TEMP) + ) lastMotorOn = ms; //... set time to NOW so the fan will turn on // Fan Settings. Set fan > 0: // - If AutoMode is on and steppers have been enabled for CONTROLLERFAN_IDLE_TIME seconds. diff --git a/Marlin/src/feature/cooler.cpp b/Marlin/src/feature/cooler.cpp index a1f25c5fad..e0f99777d1 100644 --- a/Marlin/src/feature/cooler.cpp +++ b/Marlin/src/feature/cooler.cpp @@ -22,26 +22,27 @@ #include "../inc/MarlinConfig.h" -#if HAS_COOLER +#if EITHER(HAS_COOLER, LASER_COOLANT_FLOW_METER) #include "cooler.h" Cooler cooler; -uint8_t Cooler::mode = 0; -uint16_t Cooler::capacity; -uint16_t Cooler::load; -bool Cooler::enabled = false; +#if HAS_COOLER + uint8_t Cooler::mode = 0; + uint16_t Cooler::capacity; + uint16_t Cooler::load; + bool Cooler::enabled = false; +#endif #if ENABLED(LASER_COOLANT_FLOW_METER) bool Cooler::flowmeter = false; millis_t Cooler::flowmeter_next_ms; // = 0 volatile uint16_t Cooler::flowpulses; float Cooler::flowrate; + #if ENABLED(FLOWMETER_SAFETY) + bool Cooler::flowsafety_enabled = true; + bool Cooler::flowfault = false; + #endif #endif -#if ENABLED(FLOWMETER_SAFETY) - bool Cooler::flowsafety_enabled = true; - bool Cooler::fault = false; -#endif - -#endif // HAS_COOLER +#endif // HAS_COOLER || LASER_COOLANT_FLOW_METER diff --git a/Marlin/src/feature/cooler.h b/Marlin/src/feature/cooler.h index 9bd98d0b10..9891514e23 100644 --- a/Marlin/src/feature/cooler.h +++ b/Marlin/src/feature/cooler.h @@ -94,12 +94,12 @@ public: } #if ENABLED(FLOWMETER_SAFETY) - static bool fault; // Flag that the cooler is in a fault state - static bool flowsafety_enabled; // Flag to disable the cutter if flow rate is too low + static bool flowfault; // Flag that the cooler is in a fault state + static bool flowsafety_enabled; // Flag to disable the cutter if flow rate is too low static void flowsafety_toggle() { flowsafety_enabled = !flowsafety_enabled; } static bool check_flow_too_low() { const bool too_low = flowsafety_enabled && flowrate < (FLOWMETER_MIN_LITERS_PER_MINUTE); - if (too_low) fault = true; + flowfault = too_low; return too_low; } #endif diff --git a/Marlin/src/feature/dac/dac_mcp4728.cpp b/Marlin/src/feature/dac/dac_mcp4728.cpp index ddbaced086..1278d1bec8 100644 --- a/Marlin/src/feature/dac/dac_mcp4728.cpp +++ b/Marlin/src/feature/dac/dac_mcp4728.cpp @@ -32,7 +32,7 @@ #include "../../inc/MarlinConfig.h" -#if ENABLED(HAS_MOTOR_CURRENT_DAC) +#if HAS_MOTOR_CURRENT_DAC #include "dac_mcp4728.h" diff --git a/Marlin/src/feature/dac/stepper_dac.cpp b/Marlin/src/feature/dac/stepper_dac.cpp index 3abaece443..6d03808b82 100644 --- a/Marlin/src/feature/dac/stepper_dac.cpp +++ b/Marlin/src/feature/dac/stepper_dac.cpp @@ -26,7 +26,7 @@ #include "../../inc/MarlinConfig.h" -#if ENABLED(HAS_MOTOR_CURRENT_DAC) +#if HAS_MOTOR_CURRENT_DAC #include "stepper_dac.h" #include "../../MarlinCore.h" // for SP_X_LBL... diff --git a/Marlin/src/feature/joystick.h b/Marlin/src/feature/joystick.h index d1c4fbd314..91bf6bdc00 100644 --- a/Marlin/src/feature/joystick.h +++ b/Marlin/src/feature/joystick.h @@ -32,13 +32,13 @@ class Joystick { friend class Temperature; private: - #if ENABLED(HAS_JOY_ADC_X) + #if HAS_JOY_ADC_X static temp_info_t x; #endif - #if ENABLED(HAS_JOY_ADC_Y) + #if HAS_JOY_ADC_Y static temp_info_t y; #endif - #if ENABLED(HAS_JOY_ADC_Z) + #if HAS_JOY_ADC_Z static temp_info_t z; #endif public: diff --git a/Marlin/src/feature/mmu/mmu2.cpp b/Marlin/src/feature/mmu/mmu2.cpp index 8a4f5ae071..1acd26f331 100644 --- a/Marlin/src/feature/mmu/mmu2.cpp +++ b/Marlin/src/feature/mmu/mmu2.cpp @@ -75,7 +75,7 @@ MMU2 mmu2; #define MMU2_NO_TOOL 99 #define MMU_BAUD 115200 -bool MMU2::enabled, MMU2::ready, MMU2::mmu_print_saved; +bool MMU2::_enabled, MMU2::ready, MMU2::mmu_print_saved; #if HAS_PRUSA_MMU2S bool MMU2::mmu2s_triggered; #endif @@ -219,7 +219,7 @@ void MMU2::mmu_loop() { DEBUG_ECHOLNPAIR("MMU => ", finda, "\nMMU - ENABLED"); - enabled = true; + _enabled = true; state = 1; TERN_(HAS_PRUSA_MMU2S, mmu2s_triggered = false); } @@ -480,7 +480,7 @@ static void mmu2_not_responding() { */ void MMU2::tool_change(const uint8_t index) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -512,7 +512,7 @@ static void mmu2_not_responding() { * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. */ void MMU2::tool_change(const char *special) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -561,7 +561,7 @@ static void mmu2_not_responding() { * Handle tool change */ void MMU2::tool_change(const uint8_t index) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -599,7 +599,7 @@ static void mmu2_not_responding() { * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. */ void MMU2::tool_change(const char *special) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -665,7 +665,7 @@ static void mmu2_not_responding() { * Handle tool change */ void MMU2::tool_change(const uint8_t index) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -693,7 +693,7 @@ static void mmu2_not_responding() { * Tc Load to nozzle after filament was prepared by Tx and extruder nozzle is already heated. */ void MMU2::tool_change(const char *special) { - if (!enabled) return; + if (!_enabled) return; set_runout_valid(false); @@ -744,7 +744,7 @@ static void mmu2_not_responding() { * Set next command */ void MMU2::command(const uint8_t mmu_cmd) { - if (!enabled) return; + if (!_enabled) return; cmd = mmu_cmd; ready = false; } @@ -833,7 +833,7 @@ void MMU2::manage_response(const bool move_axes, const bool turn_off_nozzle) { } void MMU2::set_filament_type(const uint8_t index, const uint8_t filamentType) { - if (!enabled) return; + if (!_enabled) return; cmd_arg = filamentType; command(MMU_CMD_F0 + index); @@ -892,7 +892,7 @@ void MMU2::filament_runout() { // Load filament into MMU2 void MMU2::load_filament(const uint8_t index) { - if (!enabled) return; + if (!_enabled) return; command(MMU_CMD_L0 + index); manage_response(false, false); @@ -904,7 +904,7 @@ void MMU2::load_filament(const uint8_t index) { */ bool MMU2::load_filament_to_nozzle(const uint8_t index) { - if (!enabled) return false; + if (!_enabled) return false; if (thermalManager.tooColdToExtrude(active_extruder)) { BUZZ(200, 404); @@ -940,7 +940,7 @@ void MMU2::load_to_nozzle() { bool MMU2::eject_filament(const uint8_t index, const bool recover) { - if (!enabled) return false; + if (!_enabled) return false; if (thermalManager.tooColdToExtrude(active_extruder)) { BUZZ(200, 404); @@ -989,7 +989,7 @@ bool MMU2::eject_filament(const uint8_t index, const bool recover) { */ bool MMU2::unload() { - if (!enabled) return false; + if (!_enabled) return false; if (thermalManager.tooColdToExtrude(active_extruder)) { BUZZ(200, 404); diff --git a/Marlin/src/feature/mmu/mmu2.h b/Marlin/src/feature/mmu/mmu2.h index 079a6ef79a..95338a5184 100644 --- a/Marlin/src/feature/mmu/mmu2.h +++ b/Marlin/src/feature/mmu/mmu2.h @@ -43,6 +43,7 @@ public: static void init(); static void reset(); + static inline bool enabled() { return _enabled; } static void mmu_loop(); static void tool_change(const uint8_t index); static void tool_change(const char *special); @@ -88,7 +89,7 @@ private: static void mmu_continue_loading(); #endif - static bool enabled, ready, mmu_print_saved; + static bool _enabled, ready, mmu_print_saved; static uint8_t cmd, cmd_arg, last_cmd, extruder; static int8_t state; diff --git a/Marlin/src/feature/power.cpp b/Marlin/src/feature/power.cpp index 9b173d6ee7..30bf0d764d 100644 --- a/Marlin/src/feature/power.cpp +++ b/Marlin/src/feature/power.cpp @@ -26,10 +26,7 @@ #include "../inc/MarlinConfig.h" -#if ENABLED(AUTO_POWER_CONTROL) - #include "power.h" -#include "../module/temperature.h" #include "../module/stepper/indirection.h" #include "../MarlinCore.h" @@ -41,133 +38,183 @@ #include "../gcode/gcode.h" #endif -#if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN) - #include "controllerfan.h" -#endif +#if EITHER(PSU_CONTROL, AUTO_POWER_CONTROL) Power powerManager; +bool Power::psu_on; -millis_t Power::lastPowerOn; - -bool Power::is_power_needed() { - - if (printJobOngoing() || printingIsPaused()) return true; - - #if ENABLED(AUTO_POWER_FANS) - FANS_LOOP(i) if (thermalManager.fan_speed[i]) return true; - #endif - - #if ENABLED(AUTO_POWER_E_FANS) - HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true; - #endif +#if ENABLED(AUTO_POWER_CONTROL) + #include "../module/temperature.h" #if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN) - if (controllerFan.state()) return true; + #include "controllerfan.h" #endif - if (TERN0(AUTO_POWER_CHAMBER_FAN, thermalManager.chamberfan_speed)) - return true; - - if (TERN0(AUTO_POWER_COOLER_FAN, thermalManager.coolerfan_speed)) - return true; - - // If any of the drivers or the bed are enabled... - if (X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON || Z_ENABLE_READ() == Z_ENABLE_ON - #if HAS_X2_ENABLE - || X2_ENABLE_READ() == X_ENABLE_ON - #endif - #if HAS_Y2_ENABLE - || Y2_ENABLE_READ() == Y_ENABLE_ON - #endif - #if HAS_Z2_ENABLE - || Z2_ENABLE_READ() == Z_ENABLE_ON - #endif - #if E_STEPPERS - #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON - REPEAT(E_STEPPERS, _OR_ENABLED_E) - #endif - ) return true; - - #if HAS_HOTEND - HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0 || thermalManager.temp_hotend[e].soft_pwm_amount > 0) return true; - #endif - - if (TERN0(HAS_HEATED_BED, thermalManager.degTargetBed() > 0 || thermalManager.temp_bed.soft_pwm_amount > 0)) return true; - - #if HAS_HOTEND && AUTO_POWER_E_TEMP - HOTEND_LOOP() if (thermalManager.degHotend(e) >= (AUTO_POWER_E_TEMP)) return true; - #endif - - #if HAS_HEATED_CHAMBER && AUTO_POWER_CHAMBER_TEMP - if (thermalManager.degChamber() >= (AUTO_POWER_CHAMBER_TEMP)) return true; - #endif - - #if HAS_COOLER && AUTO_POWER_COOLER_TEMP - if (thermalManager.degCooler() >= (AUTO_POWER_COOLER_TEMP)) return true; - #endif - - return false; -} - -#ifndef POWER_TIMEOUT - #define POWER_TIMEOUT 0 + millis_t Power::lastPowerOn; #endif -void Power::check(const bool pause) { - static bool _pause = false; - static millis_t nextPowerCheck = 0; - const millis_t now = millis(); - #if POWER_TIMEOUT > 0 - if (pause != _pause) { - lastPowerOn = now + !now; - _pause = pause; - } - if (pause) return; - #endif - if (ELAPSED(now, nextPowerCheck)) { - nextPowerCheck = now + 2500UL; - if (is_power_needed()) - power_on(); - else if (!lastPowerOn || (POWER_TIMEOUT > 0 && ELAPSED(now, lastPowerOn + SEC_TO_MS(POWER_TIMEOUT)))) - power_off(); - } +/** + * Initialize pins & state for the power manager. + * + */ +void Power::init(){ + psu_on = ENABLED(PSU_DEFAULT_OFF); // Set opposite state to get full power_off/on + TERN(PSU_DEFAULT_OFF, power_off(), power_on()); } +/** + * Power on if the power is currently off. + * Restores stepper drivers and processes any PSU_POWERUP_GCODE. + * + */ void Power::power_on() { - const millis_t now = millis(); - lastPowerOn = now + !now; - if (!powersupply_on) { - PSU_PIN_ON(); - safe_delay(PSU_POWERUP_DELAY); - restore_stepper_drivers(); - TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY)); - #ifdef PSU_POWERUP_GCODE - GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWERUP_GCODE)); - #endif - } -} + #if ENABLED(AUTO_POWER_CONTROL) + const millis_t now = millis(); + lastPowerOn = now + !now; + #endif -void Power::power_off() { - if (powersupply_on) { - #ifdef PSU_POWEROFF_GCODE - GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWEROFF_GCODE)); - #endif + if (psu_on) return; - #if ENABLED(PS_OFF_SOUND) - BUZZ(1000, 659); - #endif + OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE); + psu_on = true; + safe_delay(PSU_POWERUP_DELAY); + restore_stepper_drivers(); + TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY)); - PSU_PIN_OFF(); - } -} - -void Power::power_off_soon() { - #if POWER_OFF_DELAY - lastPowerOn = millis() - SEC_TO_MS(POWER_TIMEOUT) + SEC_TO_MS(POWER_OFF_DELAY); - //if (!lastPowerOn) ++lastPowerOn; - #else - power_off(); + #ifdef PSU_POWERUP_GCODE + GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWERUP_GCODE)); #endif } +/** + * Power off if the power is currently on. + * Processes any PSU_POWEROFF_GCODE and makes a PS_OFF_SOUND if enabled. + * + */ +void Power::power_off() { + if (!psu_on) return; + + #ifdef PSU_POWEROFF_GCODE + GcodeSuite::process_subcommands_now_P(PSTR(PSU_POWEROFF_GCODE)); + #endif + + #if ENABLED(PS_OFF_SOUND) + BUZZ(1000, 659); + #endif + + OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE); + psu_on = false; +} + + +#if ENABLED(AUTO_POWER_CONTROL) + + #ifndef POWER_TIMEOUT + #define POWER_TIMEOUT 0 + #endif + + /** + * Check all conditions that would signal power needing to be on. + * + * @returns bool if power is needed + */ + bool Power::is_power_needed() { + + if (printJobOngoing() || printingIsPaused()) return true; + + #if ENABLED(AUTO_POWER_FANS) + FANS_LOOP(i) if (thermalManager.fan_speed[i]) return true; + #endif + + #if ENABLED(AUTO_POWER_E_FANS) + HOTEND_LOOP() if (thermalManager.autofan_speed[e]) return true; + #endif + + #if BOTH(USE_CONTROLLER_FAN, AUTO_POWER_CONTROLLERFAN) + if (controllerFan.state()) return true; + #endif + + if (TERN0(AUTO_POWER_CHAMBER_FAN, thermalManager.chamberfan_speed)) + return true; + + if (TERN0(AUTO_POWER_COOLER_FAN, thermalManager.coolerfan_speed)) + return true; + + // If any of the drivers or the bed are enabled... + if (X_ENABLE_READ() == X_ENABLE_ON || Y_ENABLE_READ() == Y_ENABLE_ON || Z_ENABLE_READ() == Z_ENABLE_ON + #if HAS_X2_ENABLE + || X2_ENABLE_READ() == X_ENABLE_ON + #endif + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ() == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ() == Z_ENABLE_ON + #endif + #if E_STEPPERS + #define _OR_ENABLED_E(N) || E##N##_ENABLE_READ() == E_ENABLE_ON + REPEAT(E_STEPPERS, _OR_ENABLED_E) + #endif + ) return true; + + #if HAS_HOTEND + HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0 || thermalManager.temp_hotend[e].soft_pwm_amount > 0) return true; + #endif + + if (TERN0(HAS_HEATED_BED, thermalManager.degTargetBed() > 0 || thermalManager.temp_bed.soft_pwm_amount > 0)) return true; + + #if HAS_HOTEND && AUTO_POWER_E_TEMP + HOTEND_LOOP() if (thermalManager.degHotend(e) >= (AUTO_POWER_E_TEMP)) return true; + #endif + + #if HAS_HEATED_CHAMBER && AUTO_POWER_CHAMBER_TEMP + if (thermalManager.degChamber() >= (AUTO_POWER_CHAMBER_TEMP)) return true; + #endif + + #if HAS_COOLER && AUTO_POWER_COOLER_TEMP + if (thermalManager.degCooler() >= (AUTO_POWER_COOLER_TEMP)) return true; + #endif + + return false; + } + + /** + * Check if we should power off automatically (POWER_TIMEOUT elapsed, !is_power_needed). + * + * @param pause pause the 'timer' + */ + void Power::check(const bool pause) { + static millis_t nextPowerCheck = 0; + const millis_t now = millis(); + #if POWER_TIMEOUT > 0 + static bool _pause = false; + if (pause != _pause) { + lastPowerOn = now + !now; + _pause = pause; + } + if (pause) return; + #endif + if (ELAPSED(now, nextPowerCheck)) { + nextPowerCheck = now + 2500UL; + if (is_power_needed()) + power_on(); + else if (!lastPowerOn || (POWER_TIMEOUT > 0 && ELAPSED(now, lastPowerOn + SEC_TO_MS(POWER_TIMEOUT)))) + power_off(); + } + } + + #if POWER_OFF_DELAY > 0 + + /** + * Power off with a delay. Power off is triggered by check() after the delay. + * + */ + void Power::power_off_soon() { + lastPowerOn = millis() - SEC_TO_MS(POWER_TIMEOUT) + SEC_TO_MS(POWER_OFF_DELAY); + } + + #endif + #endif // AUTO_POWER_CONTROL + +#endif // PSU_CONTROL || AUTO_POWER_CONTROL diff --git a/Marlin/src/feature/power.h b/Marlin/src/feature/power.h index bca5432946..7f5a97e6df 100644 --- a/Marlin/src/feature/power.h +++ b/Marlin/src/feature/power.h @@ -25,17 +25,32 @@ * power.h - power control */ -#include "../core/millis_t.h" +#if ENABLED(AUTO_POWER_CONTROL) + #include "../core/millis_t.h" +#endif class Power { public: - static void check(const bool pause); + static bool psu_on; + + static void init(); static void power_on(); static void power_off(); + + #if ENABLED(AUTO_POWER_CONTROL) && POWER_OFF_DELAY > 0 static void power_off_soon(); - private: - static millis_t lastPowerOn; - static bool is_power_needed(); + #else + static inline void power_off_soon() { power_off(); } + #endif + + #if ENABLED(AUTO_POWER_CONTROL) + static void check(const bool pause); + + private: + static millis_t lastPowerOn; + static bool is_power_needed(); + + #endif }; extern Power powerManager; diff --git a/Marlin/src/feature/powerloss.h b/Marlin/src/feature/powerloss.h index 55180e5390..d3ecc6c9cc 100644 --- a/Marlin/src/feature/powerloss.h +++ b/Marlin/src/feature/powerloss.h @@ -64,13 +64,13 @@ typedef struct { Repeat stored_repeat; #endif - #if ENABLED(HAS_HOME_OFFSET) + #if HAS_HOME_OFFSET xyz_pos_t home_offset; #endif - #if ENABLED(HAS_POSITION_SHIFT) + #if HAS_POSITION_SHIFT xyz_pos_t position_shift; #endif - #if ENABLED(HAS_MULTI_EXTRUDER) + #if HAS_MULTI_EXTRUDER uint8_t active_extruder; #endif @@ -78,13 +78,13 @@ typedef struct { float filament_size[EXTRUDERS]; #endif - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND celsius_t target_temperature[HOTENDS]; #endif - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED celsius_t target_temperature_bed; #endif - #if ENABLED(HAS_FAN) + #if HAS_FAN uint8_t fan_speed[FAN_COUNT]; #endif diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h index 741b840ec7..c878d86fae 100644 --- a/Marlin/src/feature/tmc_util.h +++ b/Marlin/src/feature/tmc_util.h @@ -360,13 +360,6 @@ void test_tmc_connection(LOGICAL_AXIS_DECL(const bool, true)); #if ENABLED(IMPROVE_HOMING_RELIABILITY) extern millis_t sg_guard_period; constexpr uint16_t default_sg_guard_duration = 400; - - struct motion_state_t { - xy_ulong_t acceleration; - #if ENABLED(HAS_CLASSIC_JERK) - xy_float_t jerk_state; - #endif - }; #endif bool tmc_enable_stallguard(TMC2130Stepper &st); diff --git a/Marlin/src/gcode/bedlevel/mbl/G29.cpp b/Marlin/src/gcode/bedlevel/mbl/G29.cpp index 21336f0b9a..03f2c58e81 100644 --- a/Marlin/src/gcode/bedlevel/mbl/G29.cpp +++ b/Marlin/src/gcode/bedlevel/mbl/G29.cpp @@ -70,7 +70,8 @@ void GcodeSuite::G29() { return; } - int8_t ix, iy = 0; + int8_t ix, iy; + ix = iy = 0; switch (state) { case MeshReport: diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp index 7cd1f65fbf..ca9cbb8cc9 100644 --- a/Marlin/src/gcode/calibrate/G28.cpp +++ b/Marlin/src/gcode/calibrate/G28.cpp @@ -167,12 +167,15 @@ motion_state_t begin_slow_homing() { motion_state_t motion_state{0}; motion_state.acceleration.set(planner.settings.max_acceleration_mm_per_s2[X_AXIS], - planner.settings.max_acceleration_mm_per_s2[Y_AXIS]); + planner.settings.max_acceleration_mm_per_s2[Y_AXIS] + OPTARG(DELTA, planner.settings.max_acceleration_mm_per_s2[Z_AXIS]) + ); planner.settings.max_acceleration_mm_per_s2[X_AXIS] = 100; planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = 100; + TERN_(DELTA, planner.settings.max_acceleration_mm_per_s2[Z_AXIS] = 100); #if HAS_CLASSIC_JERK motion_state.jerk_state = planner.max_jerk; - planner.max_jerk.set(0, 0); + planner.max_jerk.set(0, 0 OPTARG(DELTA, 0)); #endif planner.reset_acceleration_rates(); return motion_state; @@ -181,6 +184,7 @@ void end_slow_homing(const motion_state_t &motion_state) { planner.settings.max_acceleration_mm_per_s2[X_AXIS] = motion_state.acceleration.x; planner.settings.max_acceleration_mm_per_s2[Y_AXIS] = motion_state.acceleration.y; + TERN_(DELTA, planner.settings.max_acceleration_mm_per_s2[Z_AXIS] = motion_state.acceleration.z); TERN_(HAS_CLASSIC_JERK, planner.max_jerk = motion_state.jerk_state); planner.reset_acceleration_rates(); } @@ -259,7 +263,7 @@ void GcodeSuite::G28() { reset_stepper_timeout(); #define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT) - #if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(X2) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Y2) + #if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(X2) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Y2) || (ENABLED(DELTA) && HAS_CURRENT_HOME(Z)) #define HAS_HOMING_CURRENT 1 #endif @@ -287,6 +291,11 @@ void GcodeSuite::G28() { stepperY2.rms_current(Y2_CURRENT_HOME); if (DEBUGGING(LEVELING)) debug_current(PSTR("Y2"), tmc_save_current_Y2, Y2_CURRENT_HOME); #endif + #if HAS_CURRENT_HOME(Z) && ENABLED(DELTA) + const int16_t tmc_save_current_Z = stepperZ.getMilliamps(); + stepperZ.rms_current(Z_CURRENT_HOME); + if (DEBUGGING(LEVELING)) debug_current(PSTR("Z"), tmc_save_current_Z, Z_CURRENT_HOME); + #endif #endif #if ENABLED(IMPROVE_HOMING_RELIABILITY) @@ -497,6 +506,9 @@ void GcodeSuite::G28() { #if HAS_CURRENT_HOME(Y2) stepperY2.rms_current(tmc_save_current_Y2); #endif + #if HAS_CURRENT_HOME(Z) && ENABLED(DELTA) + stepperZ.rms_current(tmc_save_current_Z); + #endif #if HAS_CURRENT_HOME(I) stepperI.rms_current(tmc_save_current_I); #endif diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp index 14ac53aeba..a897a10115 100644 --- a/Marlin/src/gcode/calibrate/G33.cpp +++ b/Marlin/src/gcode/calibrate/G33.cpp @@ -63,7 +63,7 @@ enum CalEnum : char { // the 7 main calibration points - #define LOOP_CAL_RAD(VAR) LOOP_CAL_PT(VAR, __A, _7P_STEP) #define LOOP_CAL_ACT(VAR, _4P, _OP) LOOP_CAL_PT(VAR, _OP ? _AB : __A, _4P ? _4P_STEP : _7P_STEP) -#if ENABLED(HAS_MULTI_HOTEND) +#if HAS_MULTI_HOTEND const uint8_t old_tool_index = active_extruder; #endif @@ -71,7 +71,9 @@ float lcd_probe_pt(const xy_pos_t &xy); void ac_home() { endstops.enable(true); + TERN_(SENSORLESS_HOMING, probe.set_homing_current(true)); home_delta(); + TERN_(SENSORLESS_HOMING, probe.set_homing_current(false)); endstops.not_homing(); } @@ -384,6 +386,12 @@ static float auto_tune_a() { * V3 Report settings and probe results * * E Engage the probe for each point + * + * With SENSORLESS_PROBING: + * Use these flags to calibrate stall sensitivity: (e.g., `G33 P1 Y Z` to calibrate X only.) + * X Don't activate stallguard on X. + * Y Don't activate stallguard on Y. + * Z Don't activate stallguard on Z. */ void GcodeSuite::G33() { @@ -417,6 +425,12 @@ void GcodeSuite::G33() { const bool stow_after_each = parser.seen_test('E'); + #if ENABLED(SENSORLESS_PROBING) + probe.test_sensitivity.x = !parser.seen_test('X'); + TERN_(HAS_Y_AXIS, probe.test_sensitivity.y = !parser.seen_test('Y')); + TERN_(HAS_Z_AXIS, probe.test_sensitivity.z = !parser.seen_test('Z')); + #endif + const bool _0p_calibration = probe_points == 0, _1p_calibration = probe_points == 1 || probe_points == -1, _4p_calibration = probe_points == 2, @@ -587,7 +601,7 @@ void GcodeSuite::G33() { // print report - if (verbose_level == 3) + if (verbose_level == 3 || verbose_level == 0) print_calibration_results(z_at_pt, _tower_results, _opposite_results); if (verbose_level != 0) { // !dry run diff --git a/Marlin/src/gcode/calibrate/G34.cpp b/Marlin/src/gcode/calibrate/G34.cpp index 956960866d..f335a12311 100644 --- a/Marlin/src/gcode/calibrate/G34.cpp +++ b/Marlin/src/gcode/calibrate/G34.cpp @@ -81,11 +81,11 @@ void GcodeSuite::G34() { const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT); const uint32_t previous_current = stepper.motor_current_setting[Z_AXIS]; stepper.set_digipot_current(1, target_current); - #elif ENABLED(HAS_MOTOR_CURRENT_DAC) + #elif HAS_MOTOR_CURRENT_DAC const float target_current = parser.floatval('S', GANTRY_CALIBRATION_CURRENT); const float previous_current = dac_amps(Z_AXIS, target_current); stepper_dac.set_current_value(Z_AXIS, target_current); - #elif ENABLED(HAS_MOTOR_CURRENT_I2C) + #elif HAS_MOTOR_CURRENT_I2C const uint16_t target_current = parser.intval('S', GANTRY_CALIBRATION_CURRENT); previous_current = dac_amps(Z_AXIS); digipot_i2c.set_current(Z_AXIS, target_current) @@ -127,9 +127,9 @@ void GcodeSuite::G34() { stepper.set_digipot_current(Z_AXIS, previous_current); #elif HAS_MOTOR_CURRENT_PWM stepper.set_digipot_current(1, previous_current); - #elif ENABLED(HAS_MOTOR_CURRENT_DAC) + #elif HAS_MOTOR_CURRENT_DAC stepper_dac.set_current_value(Z_AXIS, previous_current); - #elif ENABLED(HAS_MOTOR_CURRENT_I2C) + #elif HAS_MOTOR_CURRENT_I2C digipot_i2c.set_current(Z_AXIS, previous_current) #elif HAS_TRINAMIC_CONFIG #if AXIS_IS_TMC(Z) diff --git a/Marlin/src/gcode/calibrate/M666.cpp b/Marlin/src/gcode/calibrate/M666.cpp index 8ff51f0e3f..872344e4e9 100644 --- a/Marlin/src/gcode/calibrate/M666.cpp +++ b/Marlin/src/gcode/calibrate/M666.cpp @@ -27,30 +27,72 @@ #include "../gcode.h" #if ENABLED(DELTA) - #include "../../module/delta.h" #include "../../module/motion.h" +#else + #include "../../module/endstops.h" +#endif - #define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) - #include "../../core/debug_out.h" +#define DEBUG_OUT ENABLED(DEBUG_LEVELING_FEATURE) +#include "../../core/debug_out.h" + +void M666_report(const bool forReplay=true) { + if (!forReplay) { SERIAL_ECHOLNPGM("; Endstop adjustment:"); SERIAL_ECHO_START(); } + #if ENABLED(DELTA) + SERIAL_ECHOLNPAIR_P( + PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a) + , SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b) + , SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c) + ); + #else + SERIAL_ECHOPGM(" M666"); + #if ENABLED(X_DUAL_ENDSTOPS) + SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj)); + #endif + #if ENABLED(Y_DUAL_ENDSTOPS) + SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj)); + #endif + #if ENABLED(Z_MULTI_ENDSTOPS) + #if NUM_Z_STEPPER_DRIVERS >= 3 + SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj)); + if (!forReplay) SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj)); + #if NUM_Z_STEPPER_DRIVERS >= 4 + if (!forReplay) SERIAL_ECHO_START(); + SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj)); + #endif + #else + SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj)); + #endif + #endif + #endif +} + +#if ENABLED(DELTA) /** * M666: Set delta endstop adjustment */ void GcodeSuite::M666() { DEBUG_SECTION(log_M666, "M666", DEBUGGING(LEVELING)); + bool is_err = false, is_set = false; LOOP_LINEAR_AXES(i) { if (parser.seen(AXIS_CHAR(i))) { + is_set = true; const float v = parser.value_linear_units(); - if (v * Z_HOME_DIR <= 0) delta_endstop_adj[i] = v; - if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", delta_endstop_adj[i]); + if (v > 0) + is_err = true; + else { + delta_endstop_adj[i] = v; + if (DEBUGGING(LEVELING)) DEBUG_ECHOLNPAIR("delta_endstop_adj[", AS_CHAR(AXIS_CHAR(i)), "] = ", v); + } } } + if (is_err) SERIAL_ECHOLNPAIR("?M666 offsets must be <= 0"); + if (!is_set) M666_report(); } -#elif HAS_EXTRA_ENDSTOPS - - #include "../../module/endstops.h" +#else /** * M666: Set Dual Endstops offsets for X, Y, and/or Z. @@ -81,21 +123,7 @@ #endif } #endif - if (!parser.seen("XYZ")) { - auto echo_adj = [](PGM_P const label, const_float_t value) { SERIAL_ECHOPAIR_P(label, value); }; - SERIAL_ECHOPGM("Dual Endstop Adjustment (mm): "); - #if ENABLED(X_DUAL_ENDSTOPS) - echo_adj(PSTR(" X2:"), endstops.x2_endstop_adj); - #endif - #if ENABLED(Y_DUAL_ENDSTOPS) - echo_adj(PSTR(" Y2:"), endstops.y2_endstop_adj); - #endif - #if ENABLED(Z_MULTI_ENDSTOPS) - #define _ECHO_ZADJ(N) echo_adj(PSTR(" Z" STRINGIFY(N) ":"), endstops.z##N##_endstop_adj); - REPEAT_S(2, INCREMENT(NUM_Z_STEPPER_DRIVERS), _ECHO_ZADJ) - #endif - SERIAL_EOL(); - } + if (!parser.seen("XYZ")) M666_report(); } #endif // HAS_EXTRA_ENDSTOPS diff --git a/Marlin/src/gcode/calibrate/M852.cpp b/Marlin/src/gcode/calibrate/M852.cpp index 6f1e984bc3..73b18ad466 100644 --- a/Marlin/src/gcode/calibrate/M852.cpp +++ b/Marlin/src/gcode/calibrate/M852.cpp @@ -93,7 +93,7 @@ void GcodeSuite::M852() { if (!ijk) { SERIAL_ECHO_START(); - SERIAL_ECHOPGM_P(GET_TEXT(MSG_SKEW_FACTOR)); + SERIAL_ECHOPGM("Skew Factor"); SERIAL_ECHOPAIR_F(" XY: ", planner.skew_factor.xy, 6); #if ENABLED(SKEW_CORRECTION_FOR_Z) SERIAL_ECHOPAIR_F(" XZ: ", planner.skew_factor.xz, 6); diff --git a/Marlin/src/gcode/control/M80_M81.cpp b/Marlin/src/gcode/control/M80_M81.cpp index 1b5ea2f7ef..9640c72006 100644 --- a/Marlin/src/gcode/control/M80_M81.cpp +++ b/Marlin/src/gcode/control/M80_M81.cpp @@ -29,25 +29,17 @@ #include "../../inc/MarlinConfig.h" +#if ENABLED(PSU_CONTROL) + #include "../queue.h" + #include "../../feature/power.h" +#endif + #if HAS_SUICIDE #include "../../MarlinCore.h" #endif #if ENABLED(PSU_CONTROL) - #if ENABLED(AUTO_POWER_CONTROL) - #include "../../feature/power.h" - #else - void restore_stepper_drivers(); - #endif - - // Could be moved to a feature, but this is all the data - bool powersupply_on; - - #if HAS_TRINAMIC_CONFIG - #include "../../feature/tmc_util.h" - #endif - /** * M80 : Turn on the Power Supply * M80 S : Report the current state and exit @@ -56,11 +48,11 @@ // S: Report the current power supply state and exit if (parser.seen('S')) { - SERIAL_ECHOPGM_P(powersupply_on ? PSTR("PS:1\n") : PSTR("PS:0\n")); + SERIAL_ECHOPGM_P(powerManager.psu_on ? PSTR("PS:1\n") : PSTR("PS:0\n")); return; } - PSU_ON(); + powerManager.power_on(); /** * If you have a switch on suicide pin, this is useful @@ -71,12 +63,6 @@ OUT_WRITE(SUICIDE_PIN, !SUICIDE_PIN_INVERTING); #endif - #if DISABLED(AUTO_POWER_CONTROL) - safe_delay(PSU_POWERUP_DELAY); - restore_stepper_drivers(); - TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY)); - #endif - TERN_(HAS_LCD_MENU, ui.reset_status()); } @@ -106,7 +92,7 @@ void GcodeSuite::M81() { #if HAS_SUICIDE suicide(); #elif ENABLED(PSU_CONTROL) - PSU_OFF_SOON(); + powerManager.power_off_soon(); #endif LCD_MESSAGEPGM_P(PSTR(MACHINE_NAME " " STR_OFF ".")); diff --git a/Marlin/src/gcode/feature/controllerfan/M710.cpp b/Marlin/src/gcode/feature/controllerfan/M710.cpp index cc450732ba..aa382a3ea9 100644 --- a/Marlin/src/gcode/feature/controllerfan/M710.cpp +++ b/Marlin/src/gcode/feature/controllerfan/M710.cpp @@ -27,7 +27,7 @@ #include "../../gcode.h" #include "../../../feature/controllerfan.h" -void M710_report(const bool forReplay) { +void M710_report(const bool forReplay=true) { if (!forReplay) { SERIAL_ECHOLNPGM("; Controller Fan"); SERIAL_ECHO_START(); } SERIAL_ECHOLNPAIR(" M710" " S", int(controllerFan.settings.active_speed), @@ -75,7 +75,7 @@ void GcodeSuite::M710() { if (seenD) controllerFan.settings.duration = parser.value_ushort(); if (!(seenR || seenS || seenI || seenA || seenD)) - M710_report(false); + M710_report(); } #endif // CONTROLLER_FAN_EDITABLE diff --git a/Marlin/src/gcode/feature/digipot/M907-M910.cpp b/Marlin/src/gcode/feature/digipot/M907-M910.cpp index 118ad21564..bd741f8a64 100644 --- a/Marlin/src/gcode/feature/digipot/M907-M910.cpp +++ b/Marlin/src/gcode/feature/digipot/M907-M910.cpp @@ -34,7 +34,7 @@ #include "../../../feature/digipot/digipot.h" #endif -#if ENABLED(HAS_MOTOR_CURRENT_DAC) +#if HAS_MOTOR_CURRENT_DAC #include "../../../feature/dac/stepper_dac.h" #endif @@ -73,7 +73,7 @@ void GcodeSuite::M907() { #endif #endif - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC if (parser.seenval('S')) { const float dac_percent = parser.value_float(); LOOP_LE_N(i, 4) stepper_dac.set_current_percent(i, dac_percent); @@ -92,7 +92,7 @@ void GcodeSuite::M907() { TERN_(HAS_MOTOR_CURRENT_DAC, stepper_dac.set_current_value(parser.byteval('P', -1), parser.ushortval('S', 0))); } - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC void GcodeSuite::M909() { stepper_dac.print_values(); } void GcodeSuite::M910() { stepper_dac.commit_eeprom(); } diff --git a/Marlin/src/gcode/feature/trinamic/M911-M914.cpp b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp index f90a30aab2..fca16c0630 100644 --- a/Marlin/src/gcode/feature/trinamic/M911-M914.cpp +++ b/Marlin/src/gcode/feature/trinamic/M911-M914.cpp @@ -260,10 +260,10 @@ #endif case Z_AXIS: - TERN_(Z_HAS_STEALTCHOP, if (index < 2) TMC_SET_PWMTHRS(Z,Z)); - TERN_(Z2_HAS_STEALTCHOP, if (index == 0 || index == 2) TMC_SET_PWMTHRS(Z,Z2)); - TERN_(Z3_HAS_STEALTCHOP, if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3)); - TERN_(Z4_HAS_STEALTCHOP, if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4)); + TERN_(Z_HAS_STEALTHCHOP, if (index < 2) TMC_SET_PWMTHRS(Z,Z)); + TERN_(Z2_HAS_STEALTHCHOP, if (index == 0 || index == 2) TMC_SET_PWMTHRS(Z,Z2)); + TERN_(Z3_HAS_STEALTHCHOP, if (index == 0 || index == 3) TMC_SET_PWMTHRS(Z,Z3)); + TERN_(Z4_HAS_STEALTHCHOP, if (index == 0 || index == 4) TMC_SET_PWMTHRS(Z,Z4)); break; #if E_STEPPERS case E_AXIS: { diff --git a/Marlin/src/gcode/gcode.cpp b/Marlin/src/gcode/gcode.cpp index ac3b5010b9..12fd231ca8 100644 --- a/Marlin/src/gcode/gcode.cpp +++ b/Marlin/src/gcode/gcode.cpp @@ -292,7 +292,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) { #endif #if ENABLED(FLOWMETER_SAFETY) - if (cooler.fault) { + if (cooler.flowfault) { SERIAL_ECHO_MSG(STR_FLOWMETER_FAULT); return; } @@ -908,7 +908,7 @@ void GcodeSuite::process_parsed_command(const bool no_ok/*=false*/) { case 907: M907(); break; // M907: Set digital trimpot motor current using axis codes. #if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC) case 908: M908(); break; // M908: Control digital trimpot directly. - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC case 909: M909(); break; // M909: Print digipot/DAC current value case 910: M910(); break; // M910: Commit digipot/DAC value to external EEPROM #endif diff --git a/Marlin/src/gcode/gcode.h b/Marlin/src/gcode/gcode.h index f03d9702e0..6b9d0eb47d 100644 --- a/Marlin/src/gcode/gcode.h +++ b/Marlin/src/gcode/gcode.h @@ -525,7 +525,7 @@ private: static void G38(const int8_t subcode); #endif - #if ENABLED(HAS_MESH) + #if HAS_MESH static void G42(); #endif @@ -558,7 +558,7 @@ private: static void G425(); #endif - #if ENABLED(HAS_RESUME_CONTINUE) + #if HAS_RESUME_CONTINUE static void M0_M1(); #endif @@ -613,7 +613,7 @@ private: static void M31(); #if ENABLED(SDSUPPORT) - #if ENABLED(HAS_MEDIA_SUBCALLS) + #if HAS_MEDIA_SUBCALLS static void M32(); #endif #if ENABLED(LONG_FILENAME_HOST_SUPPORT) @@ -744,7 +744,7 @@ private: static void M149(); #endif - #if ENABLED(HAS_COLOR_LEDS) + #if HAS_COLOR_LEDS static void M150(); #endif @@ -778,7 +778,7 @@ private: static void M204(); static void M205(); - #if ENABLED(HAS_M206_COMMAND) + #if HAS_M206_COMMAND static void M206(); #endif @@ -792,11 +792,11 @@ private: static void M211(); - #if ENABLED(HAS_MULTI_EXTRUDER) + #if HAS_MULTI_EXTRUDER static void M217(); #endif - #if ENABLED(HAS_HOTEND_OFFSET) + #if HAS_HOTEND_OFFSET static void M218(); #endif @@ -814,7 +814,7 @@ private: static void M240(); #endif - #if ENABLED(HAS_LCD_CONTRAST) + #if HAS_LCD_CONTRAST static void M250(); #endif @@ -834,7 +834,7 @@ private: static void M290(); #endif - #if ENABLED(HAS_BUZZER) + #if HAS_BUZZER static void M300(); #endif @@ -846,7 +846,7 @@ private: static void M302(); #endif - #if ENABLED(HAS_PID_HEATING) + #if HAS_PID_HEATING static void M303(); #endif @@ -854,7 +854,7 @@ private: static void M304(); #endif - #if ENABLED(HAS_USER_THERMISTORS) + #if HAS_USER_THERMISTORS static void M305(); #endif @@ -895,7 +895,7 @@ private: static void M402(); #endif - #if ENABLED(HAS_PRUSA_MMU2) + #if HAS_PRUSA_MMU2 static void M403(); #endif @@ -906,11 +906,11 @@ private: static void M407(); #endif - #if ENABLED(HAS_FILAMENT_SENSOR) + #if HAS_FILAMENT_SENSOR static void M412(); #endif - #if ENABLED(HAS_MULTI_LANGUAGE) + #if HAS_MULTI_LANGUAGE static void M414(); #endif @@ -923,11 +923,11 @@ private: static void M425(); #endif - #if ENABLED(HAS_M206_COMMAND) + #if HAS_M206_COMMAND static void M428(); #endif - #if ENABLED(HAS_POWER_MONITOR) + #if HAS_POWER_MONITOR static void M430(); #endif @@ -978,11 +978,11 @@ private: static void M603(); #endif - #if ENABLED(HAS_DUPLICATION_MODE) + #if HAS_DUPLICATION_MODE static void M605(); #endif - #if ENABLED(IS_KINEMATIC) + #if IS_KINEMATIC static void M665(); #endif @@ -1007,7 +1007,7 @@ private: static void M810_819(); #endif - #if ENABLED(HAS_BED_PROBE) + #if HAS_BED_PROBE static void M851(); #endif @@ -1040,7 +1040,7 @@ private: #if HAS_TRINAMIC_CONFIG static void M122(); static void M906(); - #if ENABLED(HAS_STEALTHCHOP) + #if HAS_STEALTHCHOP static void M569(); #endif #if ENABLED(MONITOR_DRIVER_STATUS) @@ -1067,7 +1067,7 @@ private: static void M907(); #if EITHER(HAS_MOTOR_CURRENT_SPI, HAS_MOTOR_CURRENT_DAC) static void M908(); - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC static void M909(); static void M910(); #endif diff --git a/Marlin/src/gcode/host/M115.cpp b/Marlin/src/gcode/host/M115.cpp index 49bb806377..3b88c6905e 100644 --- a/Marlin/src/gcode/host/M115.cpp +++ b/Marlin/src/gcode/host/M115.cpp @@ -54,6 +54,9 @@ void GcodeSuite::M115() { "PROTOCOL_VERSION:" PROTOCOL_VERSION " " "MACHINE_TYPE:" MACHINE_NAME " " "EXTRUDER_COUNT:" STRINGIFY(EXTRUDERS) " " + #if LINEAR_AXES != XYZ + "AXIS_COUNT:" STRINGIFY(LINEAR_AXES) " " + #endif #ifdef MACHINE_UUID "UUID:" MACHINE_UUID #endif diff --git a/Marlin/src/gcode/motion/G2_G3.cpp b/Marlin/src/gcode/motion/G2_G3.cpp index 170789d827..094afdb70e 100644 --- a/Marlin/src/gcode/motion/G2_G3.cpp +++ b/Marlin/src/gcode/motion/G2_G3.cpp @@ -83,12 +83,13 @@ void plan_arc( #endif // Angle of rotation between position and target from the circle center. - float angular_travel; + float angular_travel, abs_angular_travel; // Do a full circle if starting and ending positions are "identical" if (NEAR(current_position[p_axis], cart[p_axis]) && NEAR(current_position[q_axis], cart[q_axis])) { // Preserve direction for circles angular_travel = clockwise ? -RADIANS(360) : RADIANS(360); + abs_angular_travel = RADIANS(360); } else { // Calculate the angle @@ -103,8 +104,10 @@ void plan_arc( case 2: angular_travel += RADIANS(360); break; // Negative but CCW? Reverse direction. } + abs_angular_travel = ABS(angular_travel); + #ifdef MIN_ARC_SEGMENTS - min_segments = CEIL(min_segments * ABS(angular_travel) / RADIANS(360)); + min_segments = CEIL(min_segments * abs_angular_travel / RADIANS(360)); NOLESS(min_segments, 1U); #endif } @@ -117,8 +120,8 @@ void plan_arc( #endif // If circling around... - if (ENABLED(ARC_P_CIRCLES) && circles) { - const float total_angular = angular_travel + circles * RADIANS(360), // Total rotation with all circles and remainder + if (TERN0(ARC_P_CIRCLES, circles)) { + const float total_angular = abs_angular_travel + circles * RADIANS(360), // Total rotation with all circles and remainder part_per_circle = RADIANS(360) / total_angular; // Each circle's part of the total #if HAS_Z_AXIS @@ -138,8 +141,8 @@ void plan_arc( TERN_(HAS_EXTRUDERS, extruder_travel = cart.e - current_position.e); } - const float flat_mm = radius * angular_travel, - mm_of_travel = TERN_(HAS_Z_AXIS, linear_travel ? HYPOT(flat_mm, linear_travel) :) ABS(flat_mm); + const float flat_mm = radius * abs_angular_travel, + mm_of_travel = TERN_(HAS_Z_AXIS, linear_travel ? HYPOT(flat_mm, linear_travel) :) flat_mm; if (mm_of_travel < 0.001f) return; const feedRate_t scaled_fr_mm_s = MMS_SCALED(feedrate_mm_s); diff --git a/Marlin/src/gcode/queue.h b/Marlin/src/gcode/queue.h index ea99ce7a2d..3474a402c3 100644 --- a/Marlin/src/gcode/queue.h +++ b/Marlin/src/gcode/queue.h @@ -59,7 +59,7 @@ public: struct CommandLine { char buffer[MAX_CMD_SIZE]; //!< The command buffer bool skip_ok; //!< Skip sending ok when command is processed? - #if ENABLED(HAS_MULTI_SERIAL) + #if HAS_MULTI_SERIAL serial_index_t port; //!< Serial port the command was received on #endif }; diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h index c65c17558f..a4d621b014 100644 --- a/Marlin/src/inc/Conditionals_LCD.h +++ b/Marlin/src/inc/Conditionals_LCD.h @@ -31,6 +31,11 @@ #define MKS_MINI_12864 #endif +// MKS_MINI_12864_V3 is simply identical to FYSETC_MINI_12864_2_1 +#if ENABLED(MKS_MINI_12864_V3) + #define FYSETC_MINI_12864_2_1 +#endif + /** * General Flags that may be set below by specific LCDs * @@ -208,7 +213,7 @@ #define LCD_PROGRESS_BAR #endif #if ENABLED(TFTGLCD_PANEL_I2C) - #define LCD_I2C_ADDRESS 0x27 // Must be equal to panel's I2C slave addres + #define LCD_I2C_ADDRESS 0x33 // Must be 0x33 for STM32 main boards and equal to panel's I2C slave addres #endif #define LCD_USE_I2C_BUZZER // Enable buzzer on LCD, used for both I2C and SPI buses (LiquidTWI2 not required) #define STD_ENCODER_PULSES_PER_STEP 2 diff --git a/Marlin/src/inc/Conditionals_adv.h b/Marlin/src/inc/Conditionals_adv.h index f88d28e1a1..55ae6ec535 100644 --- a/Marlin/src/inc/Conditionals_adv.h +++ b/Marlin/src/inc/Conditionals_adv.h @@ -112,17 +112,419 @@ #undef STEALTHCHOP_E #endif -#if TEMP_SENSOR_BED == 0 +/** + * Temperature Sensors; define what sensor(s) we have. + */ + +// Temperature sensor IDs +#define HID_REDUNDANT -6 +#define HID_COOLER -5 +#define HID_PROBE -4 +#define HID_BOARD -3 +#define HID_CHAMBER -2 +#define HID_BED -1 +#define HID_E0 0 +#define HID_E1 1 +#define HID_E2 2 +#define HID_E3 3 +#define HID_E4 4 +#define HID_E5 5 +#define HID_E6 6 +#define HID_E7 7 + +#define ANY_TEMP_SENSOR_IS(n) (n == TEMP_SENSOR_0 || n == TEMP_SENSOR_1 || n == TEMP_SENSOR_2 || n == TEMP_SENSOR_3 \ + || n == TEMP_SENSOR_4 || n == TEMP_SENSOR_5 || n == TEMP_SENSOR_6 || n == TEMP_SENSOR_7 \ + || n == TEMP_SENSOR_BED \ + || n == TEMP_SENSOR_PROBE \ + || n == TEMP_SENSOR_CHAMBER \ + || n == TEMP_SENSOR_COOLER \ + || n == TEMP_SENSOR_REDUNDANT ) +#if ANY_TEMP_SENSOR_IS(1000) + #define HAS_USER_THERMISTORS 1 +#endif +#undef ANY_TEMP_SENSOR_IS + +#if TEMP_SENSOR_REDUNDANT + #define _HEATER_ID(M) HID_##M + #define HEATER_ID(M) _HEATER_ID(M) + #define REDUNDANT_TEMP_MATCH(M,N) (HEATER_ID(TEMP_SENSOR_REDUNDANT_##M) == _HEATER_ID(N)) +#else + #define REDUNDANT_TEMP_MATCH(...) 0 +#endif + +#if TEMP_SENSOR_0 == -5 || TEMP_SENSOR_0 == -3 || TEMP_SENSOR_0 == -2 + #define TEMP_SENSOR_0_IS_MAX_TC 1 + #if TEMP_SENSOR_0 == -5 + #define TEMP_SENSOR_0_IS_MAX31865 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN 0 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 + #ifndef MAX31865_SENSOR_WIRES_0 + #define MAX31865_SENSOR_WIRES_0 2 + #endif + #elif TEMP_SENSOR_0 == -3 + #define TEMP_SENSOR_0_IS_MAX31855 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN -270 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_0 == -2 + #define TEMP_SENSOR_0_IS_MAX6675 1 + #define TEMP_SENSOR_0_MAX_TC_TMIN 0 + #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 + #endif +#elif TEMP_SENSOR_0 == -4 + #define TEMP_SENSOR_0_IS_AD8495 1 +#elif TEMP_SENSOR_0 == -1 + #define TEMP_SENSOR_0_IS_AD595 1 +#elif TEMP_SENSOR_0 > 0 + #define TEMP_SENSOR_0_IS_THERMISTOR 1 + #if TEMP_SENSOR_0 == 1000 + #define TEMP_SENSOR_0_IS_CUSTOM 1 + #elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999 + #define TEMP_SENSOR_0_IS_DUMMY 1 + #endif +#else + #undef HEATER_0_MINTEMP + #undef HEATER_0_MAXTEMP +#endif + +#if TEMP_SENSOR_1 == -5 || TEMP_SENSOR_1 == -3 || TEMP_SENSOR_1 == -2 + #define TEMP_SENSOR_1_IS_MAX_TC 1 + #if TEMP_SENSOR_1 == -5 + #define TEMP_SENSOR_1_IS_MAX31865 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN 0 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 + #ifndef MAX31865_SENSOR_WIRES_1 + #define MAX31865_SENSOR_WIRES_1 2 + #endif + #elif TEMP_SENSOR_1 == -3 + #define TEMP_SENSOR_1_IS_MAX31855 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN -270 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_1 == -2 + #define TEMP_SENSOR_1_IS_MAX6675 1 + #define TEMP_SENSOR_1_MAX_TC_TMIN 0 + #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 + #endif + + #if TEMP_SENSOR_1 != TEMP_SENSOR_0 + #if TEMP_SENSOR_1 == -5 + #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #elif TEMP_SENSOR_1 == -3 + #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #elif TEMP_SENSOR_1 == -2 + #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." + #endif + #endif +#elif TEMP_SENSOR_1 == -4 + #define TEMP_SENSOR_1_IS_AD8495 1 +#elif TEMP_SENSOR_1 == -1 + #define TEMP_SENSOR_1_IS_AD595 1 +#elif TEMP_SENSOR_1 > 0 + #define TEMP_SENSOR_1_IS_THERMISTOR 1 + #if TEMP_SENSOR_1 == 1000 + #define TEMP_SENSOR_1_IS_CUSTOM 1 + #elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999 + #define TEMP_SENSOR_1_IS_DUMMY 1 + #endif +#else + #undef HEATER_1_MINTEMP + #undef HEATER_1_MAXTEMP +#endif + +#if TEMP_SENSOR_REDUNDANT == -5 || TEMP_SENSOR_REDUNDANT == -3 || TEMP_SENSOR_REDUNDANT == -2 + #define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1 + + #if TEMP_SENSOR_REDUNDANT == -5 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 + #elif TEMP_SENSOR_REDUNDANT == -3 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800 + #elif TEMP_SENSOR_REDUNDANT == -2 + #if !REDUNDANT_TEMP_MATCH(SOURCE, E0) && !REDUNDANT_TEMP_MATCH(SOURCE, E1) + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." + #endif + + #define TEMP_SENSOR_REDUNDANT_IS_MAX6675 1 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 + #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 + #endif + + // mimic setting up the source TEMP_SENSOR + #if REDUNDANT_TEMP_MATCH(SOURCE, E0) + #define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + #define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX + #ifndef MAX31865_SENSOR_WIRES_0 + #define MAX31865_SENSOR_WIRES_0 2 + #endif + #elif REDUNDANT_TEMP_MATCH(SOURCE, E1) + #define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN + #define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX + #ifndef MAX31865_SENSOR_WIRES_1 + #define MAX31865_SENSOR_WIRES_1 2 + #endif + #endif + + #if (TEMP_SENSOR_0_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_0) || (TEMP_SENSOR_1_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_1) + #if TEMP_SENSOR_REDUNDANT == -5 + #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #elif TEMP_SENSOR_REDUNDANT == -3 + #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #elif TEMP_SENSOR_REDUNDANT == -2 + #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." + #endif + #endif +#elif TEMP_SENSOR_REDUNDANT == -4 + #define TEMP_SENSOR_REDUNDANT_IS_AD8495 1 +#elif TEMP_SENSOR_REDUNDANT == -1 + #define TEMP_SENSOR_REDUNDANT_IS_AD595 1 +#elif TEMP_SENSOR_REDUNDANT > 0 + #define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1 + #if TEMP_SENSOR_REDUNDANT == 1000 + #define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1 + #elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999 + #error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT." + #endif +#endif + +#if TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC || TEMP_SENSOR_REDUNDANT_IS_MAX_TC + #define HAS_MAX_TC 1 +#endif +#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 || TEMP_SENSOR_REDUNDANT_IS_MAX6675 + #define HAS_MAX6675 1 +#endif +#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 || TEMP_SENSOR_REDUNDANT_IS_MAX31855 + #define HAS_MAX31855 1 +#endif +#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 || TEMP_SENSOR_REDUNDANT_IS_MAX31865 + #define HAS_MAX31865 1 +#endif + +#if TEMP_SENSOR_2 == -4 + #define TEMP_SENSOR_2_IS_AD8495 1 +#elif TEMP_SENSOR_2 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." +#elif TEMP_SENSOR_2 == -1 + #define TEMP_SENSOR_2_IS_AD595 1 +#elif TEMP_SENSOR_2 > 0 + #define TEMP_SENSOR_2_IS_THERMISTOR 1 + #if TEMP_SENSOR_2 == 1000 + #define TEMP_SENSOR_2_IS_CUSTOM 1 + #elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999 + #define TEMP_SENSOR_2_IS_DUMMY 1 + #endif +#else + #undef HEATER_2_MINTEMP + #undef HEATER_2_MAXTEMP +#endif + +#if TEMP_SENSOR_3 == -4 + #define TEMP_SENSOR_3_IS_AD8495 1 +#elif TEMP_SENSOR_3 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." +#elif TEMP_SENSOR_3 == -1 + #define TEMP_SENSOR_3_IS_AD595 1 +#elif TEMP_SENSOR_3 > 0 + #define TEMP_SENSOR_3_IS_THERMISTOR 1 + #if TEMP_SENSOR_3 == 1000 + #define TEMP_SENSOR_3_IS_CUSTOM 1 + #elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999 + #define TEMP_SENSOR_3_IS_DUMMY 1 + #endif +#else + #undef HEATER_3_MINTEMP + #undef HEATER_3_MAXTEMP +#endif + +#if TEMP_SENSOR_4 == -4 + #define TEMP_SENSOR_4_IS_AD8495 1 +#elif TEMP_SENSOR_4 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." +#elif TEMP_SENSOR_4 == -1 + #define TEMP_SENSOR_4_IS_AD595 1 +#elif TEMP_SENSOR_4 > 0 + #define TEMP_SENSOR_4_IS_THERMISTOR 1 + #if TEMP_SENSOR_4 == 1000 + #define TEMP_SENSOR_4_IS_CUSTOM 1 + #elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999 + #define TEMP_SENSOR_4_IS_DUMMY 1 + #endif +#else + #undef HEATER_4_MINTEMP + #undef HEATER_4_MAXTEMP +#endif + +#if TEMP_SENSOR_5 == -4 + #define TEMP_SENSOR_5_IS_AD8495 1 +#elif TEMP_SENSOR_5 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5." +#elif TEMP_SENSOR_5 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5." +#elif TEMP_SENSOR_5 == -1 + #define TEMP_SENSOR_5_IS_AD595 1 +#elif TEMP_SENSOR_5 > 0 + #define TEMP_SENSOR_5_IS_THERMISTOR 1 + #if TEMP_SENSOR_5 == 1000 + #define TEMP_SENSOR_5_IS_CUSTOM 1 + #elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999 + #define TEMP_SENSOR_5_IS_DUMMY 1 + #endif +#else + #undef HEATER_5_MINTEMP + #undef HEATER_5_MAXTEMP +#endif + +#if TEMP_SENSOR_6 == -4 + #define TEMP_SENSOR_6_IS_AD8495 1 +#elif TEMP_SENSOR_6 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." +#elif TEMP_SENSOR_6 == -1 + #define TEMP_SENSOR_6_IS_AD595 1 +#elif TEMP_SENSOR_6 > 0 + #define TEMP_SENSOR_6_IS_THERMISTOR 1 + #if TEMP_SENSOR_6 == 1000 + #define TEMP_SENSOR_6_IS_CUSTOM 1 + #elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999 + #define TEMP_SENSOR_6_IS_DUMMY 1 + #endif +#else + #undef HEATER_6_MINTEMP + #undef HEATER_6_MAXTEMP +#endif + +#if TEMP_SENSOR_7 == -4 + #define TEMP_SENSOR_7_IS_AD8495 1 +#elif TEMP_SENSOR_7 == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -2 + #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." +#elif TEMP_SENSOR_7 == -1 + #define TEMP_SENSOR_7_IS_AD595 1 +#elif TEMP_SENSOR_7 > 0 + #define TEMP_SENSOR_7_IS_THERMISTOR 1 + #if TEMP_SENSOR_7 == 1000 + #define TEMP_SENSOR_7_IS_CUSTOM 1 + #elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999 + #define TEMP_SENSOR_7_IS_DUMMY 1 + #endif +#else + #undef HEATER_7_MINTEMP + #undef HEATER_7_MAXTEMP +#endif + +#if TEMP_SENSOR_BED == -4 + #define TEMP_SENSOR_BED_IS_AD8495 1 +#elif TEMP_SENSOR_BED == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." +#elif TEMP_SENSOR_BED == -1 + #define TEMP_SENSOR_BED_IS_AD595 1 +#elif TEMP_SENSOR_BED > 0 + #define TEMP_SENSOR_BED_IS_THERMISTOR 1 + #if TEMP_SENSOR_BED == 1000 + #define TEMP_SENSOR_BED_IS_CUSTOM 1 + #elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999 + #define TEMP_SENSOR_BED_IS_DUMMY 1 + #endif +#else #undef THERMAL_PROTECTION_BED #undef THERMAL_PROTECTION_BED_PERIOD + #undef BED_MINTEMP + #undef BED_MAXTEMP #endif -#if TEMP_SENSOR_CHAMBER == 0 +#if TEMP_SENSOR_CHAMBER == -4 + #define TEMP_SENSOR_CHAMBER_IS_AD8495 1 +#elif TEMP_SENSOR_CHAMBER == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." +#elif TEMP_SENSOR_CHAMBER == -1 + #define TEMP_SENSOR_CHAMBER_IS_AD595 1 +#elif TEMP_SENSOR_CHAMBER > 0 + #define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1 + #if TEMP_SENSOR_CHAMBER == 1000 + #define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1 + #elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999 + #define TEMP_SENSOR_CHAMBER_IS_DUMMY 1 + #endif +#else #undef THERMAL_PROTECTION_CHAMBER + #undef CHAMBER_MINTEMP + #undef CHAMBER_MAXTEMP #endif -#if TEMP_SENSOR_COOLER == 0 +#if TEMP_SENSOR_COOLER == -4 + #define TEMP_SENSOR_COOLER_IS_AD8495 1 +#elif TEMP_SENSOR_COOLER == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER." +#elif TEMP_SENSOR_COOLER == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER." +#elif TEMP_SENSOR_COOLER == -1 + #define TEMP_SENSOR_COOLER_IS_AD595 1 +#elif TEMP_SENSOR_COOLER > 0 + #define TEMP_SENSOR_COOLER_IS_THERMISTOR 1 + #if TEMP_SENSOR_COOLER == 1000 + #define TEMP_SENSOR_COOLER_IS_CUSTOM 1 + #elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999 + #define TEMP_SENSOR_COOLER_IS_DUMMY 1 + #endif +#else #undef THERMAL_PROTECTION_COOLER + #undef COOLER_MINTEMP + #undef COOLER_MAXTEMP +#endif + +#if TEMP_SENSOR_PROBE == -4 + #define TEMP_SENSOR_PROBE_IS_AD8495 1 +#elif TEMP_SENSOR_PROBE == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE." +#elif TEMP_SENSOR_PROBE == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE." +#elif TEMP_SENSOR_PROBE == -1 + #define TEMP_SENSOR_PROBE_IS_AD595 1 +#elif TEMP_SENSOR_PROBE > 0 + #define TEMP_SENSOR_PROBE_IS_THERMISTOR 1 + #if TEMP_SENSOR_PROBE == 1000 + #define TEMP_SENSOR_PROBE_IS_CUSTOM 1 + #elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999 + #define TEMP_SENSOR_PROBE_IS_DUMMY 1 + #endif +#endif + +#if TEMP_SENSOR_BOARD == -4 + #define TEMP_SENSOR_BOARD_IS_AD8495 1 +#elif TEMP_SENSOR_BOARD == -3 + #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BOARD." +#elif TEMP_SENSOR_BOARD == -2 + #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BOARD." +#elif TEMP_SENSOR_BOARD == -1 + #define TEMP_SENSOR_BOARD_IS_AD595 1 +#elif TEMP_SENSOR_BOARD > 0 + #define TEMP_SENSOR_BOARD_IS_THERMISTOR 1 + #if TEMP_SENSOR_BOARD == 1000 + #define TEMP_SENSOR_BOARD_IS_CUSTOM 1 + #elif TEMP_SENSOR_BOARD == 998 || TEMP_SENSOR_BOARD == 999 + #define TEMP_SENSOR_BOARD_IS_DUMMY 1 + #endif #endif #if ENABLED(MIXING_EXTRUDER) && (ENABLED(RETRACT_SYNC_MIXING) || BOTH(FILAMENT_LOAD_UNLOAD_GCODES, FILAMENT_UNLOAD_ALL_EXTRUDERS)) diff --git a/Marlin/src/inc/Conditionals_post.h b/Marlin/src/inc/Conditionals_post.h index 862b4a6cb6..384cd79f91 100644 --- a/Marlin/src/inc/Conditionals_post.h +++ b/Marlin/src/inc/Conditionals_post.h @@ -369,6 +369,10 @@ #elif EITHER(MKS_MINI_12864, ENDER2_STOCKDISPLAY) #define _LCD_CONTRAST_MIN 120 #define _LCD_CONTRAST_INIT 195 +#elif ENABLED(MKS_MINI_12864_V3) + #define _LCD_CONTRAST_MIN 255 + #define _LCD_CONTRAST_INIT 255 + #define _LCD_CONTRAST_MAX 255 #elif ENABLED(FYSETC_MINI_12864) #define _LCD_CONTRAST_INIT 220 #elif ENABLED(ULTI_CONTROLLER) @@ -509,103 +513,90 @@ #endif /** - * Temp Sensor defines + * Temp Sensor defines; set up pins as needed. */ -#define ANY_TEMP_SENSOR_IS(n) ( \ - n == TEMP_SENSOR_0 || n == TEMP_SENSOR_1 || n == TEMP_SENSOR_2 || n == TEMP_SENSOR_3 \ - || n == TEMP_SENSOR_4 || n == TEMP_SENSOR_5 || n == TEMP_SENSOR_6 || n == TEMP_SENSOR_7 \ - || n == TEMP_SENSOR_BED \ - || n == TEMP_SENSOR_PROBE \ - || n == TEMP_SENSOR_CHAMBER \ - || n == TEMP_SENSOR_COOLER \ - || n == TEMP_SENSOR_REDUNDANT ) -#if ANY_TEMP_SENSOR_IS(1000) - #define HAS_USER_THERMISTORS 1 -#endif -#undef ANY_TEMP_SENSOR_IS - // Usurp a sensor to do redundant readings #if TEMP_SENSOR_REDUNDANT #ifndef TEMP_SENSOR_REDUNDANT_SOURCE - #define TEMP_SENSOR_REDUNDANT_SOURCE 1 + #define TEMP_SENSOR_REDUNDANT_SOURCE E1 #endif #ifndef TEMP_SENSOR_REDUNDANT_TARGET - #define TEMP_SENSOR_REDUNDANT_TARGET 0 + #define TEMP_SENSOR_REDUNDANT_TARGET E0 #endif #if !PIN_EXISTS(TEMP_REDUNDANT) #ifndef TEMP_SENSOR_REDUNDANT_MAX_DIFF #define TEMP_SENSOR_REDUNDANT_MAX_DIFF 10 #endif - #if TEMP_SENSOR_REDUNDANT_SOURCE == -5 + #if REDUNDANT_TEMP_MATCH(SOURCE, COOLER) #if !PIN_EXISTS(TEMP_COOLER) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to COOLER requires TEMP_COOLER_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_COOLER_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 + #elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) #if !PIN_EXISTS(TEMP_PROBE) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to PROBE requires TEMP_PROBE_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_PROBE_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 + #elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) #if !PIN_EXISTS(TEMP_CHAMBER) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to CHAMBER requires TEMP_CHAMBER_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_CHAMBER_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 + #elif REDUNDANT_TEMP_MATCH(SOURCE, BED) #if !PIN_EXISTS(TEMP_BED) #error "TEMP_SENSOR_REDUNDANT_SOURCE set to BED requires TEMP_BED_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_BED_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 0 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E0) #if !PIN_EXISTS(TEMP_0) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 0 requires TEMP_0_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E0 requires TEMP_0_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_0_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 1 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E1) #if !PIN_EXISTS(TEMP_1) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 1 requires TEMP_1_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E1 requires TEMP_1_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_1_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 2 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E2) #if !PIN_EXISTS(TEMP_2) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 2 requires TEMP_2_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E2 requires TEMP_2_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_2_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 3 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E3) #if !PIN_EXISTS(TEMP_3) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 3 requires TEMP_3_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E3 requires TEMP_3_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_3_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 4 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E4) #if !PIN_EXISTS(TEMP_4) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 4 requires TEMP_4_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E4 requires TEMP_4_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_4_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 5 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E5) #if !PIN_EXISTS(TEMP_5) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 5 requires TEMP_5_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E5 requires TEMP_5_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_5_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 6 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E6) #if !PIN_EXISTS(TEMP_6) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 6 requires TEMP_6_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E6 requires TEMP_6_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_6_PIN #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 7 + #elif REDUNDANT_TEMP_MATCH(SOURCE, E7) #if !PIN_EXISTS(TEMP_7) - #error "TEMP_SENSOR_REDUNDANT_SOURCE set to 7 requires TEMP_7_PIN." + #error "TEMP_SENSOR_REDUNDANT_SOURCE set to E7 requires TEMP_7_PIN." #else #define TEMP_REDUNDANT_PIN TEMP_7_PIN #endif @@ -613,170 +604,13 @@ #endif #endif -#if TEMP_SENSOR_0 == -5 || TEMP_SENSOR_0 == -3 || TEMP_SENSOR_0 == -2 - #define TEMP_SENSOR_0_IS_MAX_TC 1 - #if TEMP_SENSOR_0 == -5 - #define TEMP_SENSOR_0_IS_MAX31865 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN 0 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 - #ifndef MAX31865_SENSOR_WIRES_0 - #define MAX31865_SENSOR_WIRES_0 2 - #endif - #elif TEMP_SENSOR_0 == -3 - #define TEMP_SENSOR_0_IS_MAX31855 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN -270 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_0 == -2 - #define TEMP_SENSOR_0_IS_MAX6675 1 - #define TEMP_SENSOR_0_MAX_TC_TMIN 0 - #define TEMP_SENSOR_0_MAX_TC_TMAX 1024 - #endif -#elif TEMP_SENSOR_0 == -4 - #define TEMP_SENSOR_0_IS_AD8495 1 -#elif TEMP_SENSOR_0 == -1 - #define TEMP_SENSOR_0_IS_AD595 1 -#elif TEMP_SENSOR_0 > 0 - #define TEMP_SENSOR_0_IS_THERMISTOR 1 - #if TEMP_SENSOR_0 == 1000 - #define TEMP_SENSOR_0_IS_CUSTOM 1 - #elif TEMP_SENSOR_0 == 998 || TEMP_SENSOR_0 == 999 - #define TEMP_SENSOR_0_IS_DUMMY 1 - #endif -#else - #undef HEATER_0_MINTEMP - #undef HEATER_0_MAXTEMP -#endif - -#if TEMP_SENSOR_1 == -5 || TEMP_SENSOR_1 == -3 || TEMP_SENSOR_1 == -2 - #define TEMP_SENSOR_1_IS_MAX_TC 1 - #if TEMP_SENSOR_1 == -5 - #define TEMP_SENSOR_1_IS_MAX31865 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN 0 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 - #ifndef MAX31865_SENSOR_WIRES_1 - #define MAX31865_SENSOR_WIRES_1 2 - #endif - #elif TEMP_SENSOR_1 == -3 - #define TEMP_SENSOR_1_IS_MAX31855 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN -270 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_1 == -2 - #define TEMP_SENSOR_1_IS_MAX6675 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN 0 - #define TEMP_SENSOR_1_MAX_TC_TMAX 1024 - #endif - - #if TEMP_SENSOR_1 != TEMP_SENSOR_0 - #if TEMP_SENSOR_1 == -5 - #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #elif TEMP_SENSOR_1 == -3 - #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #elif TEMP_SENSOR_1 == -2 - #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_1 then TEMP_SENSOR_0 must match." - #endif - #endif -#elif TEMP_SENSOR_1 == -4 - #define TEMP_SENSOR_1_IS_AD8495 1 -#elif TEMP_SENSOR_1 == -1 - #define TEMP_SENSOR_1_IS_AD595 1 -#elif TEMP_SENSOR_1 > 0 - #define TEMP_SENSOR_1_IS_THERMISTOR 1 - #if TEMP_SENSOR_1 == 1000 - #define TEMP_SENSOR_1_IS_CUSTOM 1 - #elif TEMP_SENSOR_1 == 998 || TEMP_SENSOR_1 == 999 - #define TEMP_SENSOR_1_IS_DUMMY 1 - #endif -#else - #undef HEATER_1_MINTEMP - #undef HEATER_1_MAXTEMP -#endif - -#if TEMP_SENSOR_REDUNDANT == -5 || TEMP_SENSOR_REDUNDANT == -3 || TEMP_SENSOR_REDUNDANT == -2 - #define TEMP_SENSOR_REDUNDANT_IS_MAX_TC 1 - - #if TEMP_SENSOR_REDUNDANT == -5 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX31865 Thermocouples (-5) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX31865 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 - #elif TEMP_SENSOR_REDUNDANT == -3 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX31855 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN -270 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1800 - #elif TEMP_SENSOR_REDUNDANT == -2 - #if TEMP_SENSOR_REDUNDANT_SOURCE != 0 && TEMP_SENSOR_REDUNDANT_SOURCE != 1 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_REDUNDANT_SOURCE other than TEMP_SENSOR_0/TEMP_SENSOR_1 (0/1)." - #endif - - #define TEMP_SENSOR_REDUNDANT_IS_MAX6675 1 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN 0 - #define TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX 1024 - #endif - - // mimic setting up the source TEMP_SENSOR - #if TEMP_SENSOR_REDUNDANT_SOURCE == 0 - #define TEMP_SENSOR_0_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN - #define TEMP_SENSOR_0_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - #ifndef MAX31865_SENSOR_WIRES_0 - #define MAX31865_SENSOR_WIRES_0 2 - #endif - #elif TEMP_SENSOR_REDUNDANT_SOURCE == 1 - #define TEMP_SENSOR_1_MAX_TC_TMIN TEMP_SENSOR_REDUNDANT_MAX_TC_TMIN - #define TEMP_SENSOR_1_MAX_TC_TMAX TEMP_SENSOR_REDUNDANT_MAX_TC_TMAX - #ifndef MAX31865_SENSOR_WIRES_1 - #define MAX31865_SENSOR_WIRES_1 2 - #endif - #endif - - #if (TEMP_SENSOR_0_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_0) || (TEMP_SENSOR_1_IS_MAX_TC && TEMP_SENSOR_REDUNDANT != TEMP_SENSOR_1) - #if TEMP_SENSOR_REDUNDANT == -5 - #error "If MAX31865 Thermocouple (-5) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #elif TEMP_SENSOR_REDUNDANT == -3 - #error "If MAX31855 Thermocouple (-3) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #elif TEMP_SENSOR_REDUNDANT == -2 - #error "If MAX6675 Thermocouple (-2) is used for TEMP_SENSOR_0/TEMP_SENSOR_1 then TEMP_SENSOR_REDUNDANT must match." - #endif - #endif -#elif TEMP_SENSOR_REDUNDANT == -4 - #define TEMP_SENSOR_REDUNDANT_IS_AD8495 1 -#elif TEMP_SENSOR_REDUNDANT == -1 - #define TEMP_SENSOR_REDUNDANT_IS_AD595 1 -#elif TEMP_SENSOR_REDUNDANT > 0 - #define TEMP_SENSOR_REDUNDANT_IS_THERMISTOR 1 - #if TEMP_SENSOR_REDUNDANT == 1000 - #define TEMP_SENSOR_REDUNDANT_IS_CUSTOM 1 - #elif TEMP_SENSOR_REDUNDANT == 998 || TEMP_SENSOR_REDUNDANT == 999 - #error "Dummy sensors are not supported for TEMP_SENSOR_REDUNDANT." - #endif -#endif - -#if TEMP_SENSOR_0_IS_MAX_TC || TEMP_SENSOR_1_IS_MAX_TC || TEMP_SENSOR_REDUNDANT_IS_MAX_TC - #define HAS_MAX_TC 1 -#endif -#if TEMP_SENSOR_0_IS_MAX6675 || TEMP_SENSOR_1_IS_MAX6675 || TEMP_SENSOR_REDUNDANT_IS_MAX6675 - #define HAS_MAX6675 1 -#endif -#if TEMP_SENSOR_0_IS_MAX31855 || TEMP_SENSOR_1_IS_MAX31855 || TEMP_SENSOR_REDUNDANT_IS_MAX31855 - #define HAS_MAX31855 1 -#endif -#if TEMP_SENSOR_0_IS_MAX31865 || TEMP_SENSOR_1_IS_MAX31865 || TEMP_SENSOR_REDUNDANT_IS_MAX31865 - #define HAS_MAX31865 1 -#endif - -// -// Compatibility layer for MAX (SPI) temp boards -// +/** + * Compatibility layer for MAX (SPI) temp boards + */ #if HAS_MAX_TC // Translate old _SS, _CS, _SCK, _DO, _DI, _MISO, and _MOSI PIN defines. - #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_0_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !PIN_EXISTS(TEMP_0_CS) // SS, CS #if PIN_EXISTS(MAX6675_SS) @@ -845,7 +679,7 @@ #endif // TEMP_SENSOR_0_IS_MAX_TC - #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1) + #if TEMP_SENSOR_1_IS_MAX_TC || (TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !PIN_EXISTS(TEMP_1_CS) // SS2, CS2 #if PIN_EXISTS(MAX6675_SS2) @@ -934,203 +768,6 @@ #endif //HAS_MAX_TC -#if TEMP_SENSOR_2 == -4 - #define TEMP_SENSOR_2_IS_AD8495 1 -#elif TEMP_SENSOR_2 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_2." -#elif TEMP_SENSOR_2 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_2." -#elif TEMP_SENSOR_2 == -1 - #define TEMP_SENSOR_2_IS_AD595 1 -#elif TEMP_SENSOR_2 > 0 - #define TEMP_SENSOR_2_IS_THERMISTOR 1 - #if TEMP_SENSOR_2 == 1000 - #define TEMP_SENSOR_2_IS_CUSTOM 1 - #elif TEMP_SENSOR_2 == 998 || TEMP_SENSOR_2 == 999 - #define TEMP_SENSOR_2_IS_DUMMY 1 - #endif -#else - #undef HEATER_2_MINTEMP - #undef HEATER_2_MAXTEMP -#endif - -#if TEMP_SENSOR_3 == -4 - #define TEMP_SENSOR_3_IS_AD8495 1 -#elif TEMP_SENSOR_3 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_3." -#elif TEMP_SENSOR_3 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_3." -#elif TEMP_SENSOR_3 == -1 - #define TEMP_SENSOR_3_IS_AD595 1 -#elif TEMP_SENSOR_3 > 0 - #define TEMP_SENSOR_3_IS_THERMISTOR 1 - #if TEMP_SENSOR_3 == 1000 - #define TEMP_SENSOR_3_IS_CUSTOM 1 - #elif TEMP_SENSOR_3 == 998 || TEMP_SENSOR_3 == 999 - #define TEMP_SENSOR_3_IS_DUMMY 1 - #endif -#else - #undef HEATER_3_MINTEMP - #undef HEATER_3_MAXTEMP -#endif - -#if TEMP_SENSOR_4 == -4 - #define TEMP_SENSOR_4_IS_AD8495 1 -#elif TEMP_SENSOR_4 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_4." -#elif TEMP_SENSOR_4 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_4." -#elif TEMP_SENSOR_4 == -1 - #define TEMP_SENSOR_4_IS_AD595 1 -#elif TEMP_SENSOR_4 > 0 - #define TEMP_SENSOR_4_IS_THERMISTOR 1 - #if TEMP_SENSOR_4 == 1000 - #define TEMP_SENSOR_4_IS_CUSTOM 1 - #elif TEMP_SENSOR_4 == 998 || TEMP_SENSOR_4 == 999 - #define TEMP_SENSOR_4_IS_DUMMY 1 - #endif -#else - #undef HEATER_4_MINTEMP - #undef HEATER_4_MAXTEMP -#endif - -#if TEMP_SENSOR_5 == -4 - #define TEMP_SENSOR_5_IS_AD8495 1 -#elif TEMP_SENSOR_5 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_5." -#elif TEMP_SENSOR_5 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_5." -#elif TEMP_SENSOR_5 == -1 - #define TEMP_SENSOR_5_IS_AD595 1 -#elif TEMP_SENSOR_5 > 0 - #define TEMP_SENSOR_5_IS_THERMISTOR 1 - #if TEMP_SENSOR_5 == 1000 - #define TEMP_SENSOR_5_IS_CUSTOM 1 - #elif TEMP_SENSOR_5 == 998 || TEMP_SENSOR_5 == 999 - #define TEMP_SENSOR_5_IS_DUMMY 1 - #endif -#else - #undef HEATER_5_MINTEMP - #undef HEATER_5_MAXTEMP -#endif - -#if TEMP_SENSOR_6 == -4 - #define TEMP_SENSOR_6_IS_AD8495 1 -#elif TEMP_SENSOR_6 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_6." -#elif TEMP_SENSOR_6 == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_6." -#elif TEMP_SENSOR_6 == -1 - #define TEMP_SENSOR_6_IS_AD595 1 -#elif TEMP_SENSOR_6 > 0 - #define TEMP_SENSOR_6_IS_THERMISTOR 1 - #if TEMP_SENSOR_6 == 1000 - #define TEMP_SENSOR_6_IS_CUSTOM 1 - #elif TEMP_SENSOR_6 == 998 || TEMP_SENSOR_6 == 999 - #define TEMP_SENSOR_6_IS_DUMMY 1 - #endif -#else - #undef HEATER_6_MINTEMP - #undef HEATER_6_MAXTEMP -#endif - -#if TEMP_SENSOR_7 == -4 - #define TEMP_SENSOR_7_IS_AD8495 1 -#elif TEMP_SENSOR_7 == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_7." -#elif TEMP_SENSOR_7 == -2 - #error "MAX7775 Thermocouples (-2) not supported for TEMP_SENSOR_7." -#elif TEMP_SENSOR_7 == -1 - #define TEMP_SENSOR_7_IS_AD595 1 -#elif TEMP_SENSOR_7 > 0 - #define TEMP_SENSOR_7_IS_THERMISTOR 1 - #if TEMP_SENSOR_7 == 1000 - #define TEMP_SENSOR_7_IS_CUSTOM 1 - #elif TEMP_SENSOR_7 == 998 || TEMP_SENSOR_7 == 999 - #define TEMP_SENSOR_7_IS_DUMMY 1 - #endif -#else - #undef HEATER_7_MINTEMP - #undef HEATER_7_MAXTEMP -#endif - -#if TEMP_SENSOR_BED == -4 - #define TEMP_SENSOR_BED_IS_AD8495 1 -#elif TEMP_SENSOR_BED == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_BED." -#elif TEMP_SENSOR_BED == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_BED." -#elif TEMP_SENSOR_BED == -1 - #define TEMP_SENSOR_BED_IS_AD595 1 -#elif TEMP_SENSOR_BED > 0 - #define TEMP_SENSOR_BED_IS_THERMISTOR 1 - #if TEMP_SENSOR_BED == 1000 - #define TEMP_SENSOR_BED_IS_CUSTOM 1 - #elif TEMP_SENSOR_BED == 998 || TEMP_SENSOR_BED == 999 - #define TEMP_SENSOR_BED_IS_DUMMY 1 - #endif -#else - #undef BED_MINTEMP - #undef BED_MAXTEMP -#endif - -#if TEMP_SENSOR_CHAMBER == -4 - #define TEMP_SENSOR_CHAMBER_IS_AD8495 1 -#elif TEMP_SENSOR_CHAMBER == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_CHAMBER." -#elif TEMP_SENSOR_CHAMBER == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_CHAMBER." -#elif TEMP_SENSOR_CHAMBER == -1 - #define TEMP_SENSOR_CHAMBER_IS_AD595 1 -#elif TEMP_SENSOR_CHAMBER > 0 - #define TEMP_SENSOR_CHAMBER_IS_THERMISTOR 1 - #if TEMP_SENSOR_CHAMBER == 1000 - #define TEMP_SENSOR_CHAMBER_IS_CUSTOM 1 - #elif TEMP_SENSOR_CHAMBER == 998 || TEMP_SENSOR_CHAMBER == 999 - #define TEMP_SENSOR_CHAMBER_IS_DUMMY 1 - #endif -#else - #undef CHAMBER_MINTEMP - #undef CHAMBER_MAXTEMP -#endif - -#if TEMP_SENSOR_COOLER == -4 - #define TEMP_SENSOR_COOLER_IS_AD8495 1 -#elif TEMP_SENSOR_COOLER == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_COOLER." -#elif TEMP_SENSOR_COOLER == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_COOLER." -#elif TEMP_SENSOR_COOLER == -1 - #define TEMP_SENSOR_COOLER_IS_AD595 1 -#elif TEMP_SENSOR_COOLER > 0 - #define TEMP_SENSOR_COOLER_IS_THERMISTOR 1 - #if TEMP_SENSOR_COOLER == 1000 - #define TEMP_SENSOR_COOLER_IS_CUSTOM 1 - #elif TEMP_SENSOR_COOLER == 998 || TEMP_SENSOR_COOLER == 999 - #define TEMP_SENSOR_COOLER_IS_DUMMY 1 - #endif -#else - #undef COOLER_MINTEMP - #undef COOLER_MAXTEMP -#endif - -#if TEMP_SENSOR_PROBE == -4 - #define TEMP_SENSOR_PROBE_IS_AD8495 1 -#elif TEMP_SENSOR_PROBE == -3 - #error "MAX31855 Thermocouples (-3) not supported for TEMP_SENSOR_PROBE." -#elif TEMP_SENSOR_PROBE == -2 - #error "MAX6675 Thermocouples (-2) not supported for TEMP_SENSOR_PROBE." -#elif TEMP_SENSOR_PROBE == -1 - #define TEMP_SENSOR_PROBE_IS_AD595 1 -#elif TEMP_SENSOR_PROBE > 0 - #define TEMP_SENSOR_PROBE_IS_THERMISTOR 1 - #if TEMP_SENSOR_PROBE == 1000 - #define TEMP_SENSOR_PROBE_IS_CUSTOM 1 - #elif TEMP_SENSOR_PROBE == 998 || TEMP_SENSOR_PROBE == 999 - #define TEMP_SENSOR_PROBE_IS_DUMMY 1 - #endif -#endif - /** * X_DUAL_ENDSTOPS endstop reassignment */ @@ -2580,6 +2217,9 @@ #if HAS_ADC_TEST(COOLER) #define HAS_TEMP_ADC_COOLER 1 #endif +#if HAS_ADC_TEST(BOARD) + #define HAS_TEMP_ADC_BOARD 1 +#endif #if HAS_ADC_TEST(REDUNDANT) #define HAS_TEMP_ADC_REDUNDANT 1 #endif @@ -2600,6 +2240,9 @@ #if HAS_TEMP(COOLER) #define HAS_TEMP_COOLER 1 #endif +#if HAS_TEMP(BOARD) + #define HAS_TEMP_BOARD 1 +#endif #if HAS_TEMP(REDUNDANT) #define HAS_TEMP_REDUNDANT 1 #endif @@ -2671,7 +2314,8 @@ #if HAS_HEATED_BED || HAS_TEMP_CHAMBER #define BED_OR_CHAMBER 1 #endif -#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER + +#if HAS_TEMP_HOTEND || BED_OR_CHAMBER || HAS_TEMP_PROBE || HAS_TEMP_COOLER || HAS_TEMP_BOARD #define HAS_TEMP_SENSOR 1 #endif @@ -2809,9 +2453,6 @@ #endif #undef _NOT_E_AUTO #undef _HAS_FAN -#if PIN_EXISTS(CONTROLLER_FAN) - #define HAS_CONTROLLER_FAN 1 -#endif #if BED_OR_CHAMBER || HAS_FAN0 #define BED_OR_CHAMBER_OR_FAN 1 @@ -2888,6 +2529,27 @@ #define FAST_PWM_FAN_FREQUENCY ((F_CPU) / (2 * 255 * 1)) // Fan frequency default #endif +/** + * Controller Fan Settings + */ +#if PIN_EXISTS(CONTROLLER_FAN) + #define HAS_CONTROLLER_FAN 1 + #if CONTROLLER_FAN_MIN_BOARD_TEMP + #define HAS_CONTROLLER_FAN_MIN_BOARD_TEMP 1 + #endif +#endif + +#if HAS_CONTROLLER_FAN + #if ENABLED(CONTROLLER_FAN_USE_BOARD_TEMP) + #define HAS_CONTROLLER_FAN_BOARD_TEMP_TRIGGER 1 + #ifndef CONTROLLER_FAN_TRIGGER_TEMP + #define CONTROLLER_FAN_TRIGGER_TEMP 30 + #endif + #else + #undef CONTROLLER_FAN_TRIGGER_TEMP + #endif +#endif + // Servos #if PIN_EXISTS(SERVO0) && NUM_SERVOS > 0 #define HAS_SERVO_0 1 @@ -3262,7 +2924,7 @@ * Advanced Pause - Filament Change */ #if ENABLED(ADVANCED_PAUSE_FEATURE) - #if HAS_LCD_MENU || BOTH(EMERGENCY_PARSER, HOST_PROMPT_SUPPORT) || ENABLED(EXTENSIBLE_UI) + #if EITHER(HAS_LCD_MENU, EXTENSIBLE_UI) || BOTH(EMERGENCY_PARSER, HOST_PROMPT_SUPPORT) #define M600_PURGE_MORE_RESUMABLE 1 #endif #ifndef FILAMENT_CHANGE_SLOW_LOAD_LENGTH diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h index 43c82da90a..9a3ae46005 100644 --- a/Marlin/src/inc/SanityCheck.h +++ b/Marlin/src/inc/SanityCheck.h @@ -583,6 +583,10 @@ #error "TEMP_SENSOR_1_AS_REDUNDANT is now TEMP_SENSOR_REDUNDANT, with associated TEMP_SENSOR_REDUNDANT_* config." #elif defined(MAX_REDUNDANT_TEMP_SENSOR_DIFF) #error "MAX_REDUNDANT_TEMP_SENSOR_DIFF is now TEMP_SENSOR_REDUNDANT_MAX_DIFF" +#elif MOTHERBOARD == BOARD_DUE3DOM_MINI && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD) + #warning "Onboard temperature sensor for BOARD_DUE3DOM_MINI has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)." +#elif MOTHERBOARD == BOARD_BTT_SKR_E3_TURBO && PIN_EXISTS(TEMP_2) && DISABLED(TEMP_SENSOR_BOARD) + #warning "Onboard temperature sensor for BOARD_BTT_SKR_E3_TURBO has moved from TEMP_SENSOR_2 (TEMP_2_PIN) to TEMP_SENSOR_BOARD (TEMP_BOARD_PIN)." #endif constexpr float arm[] = AXIS_RELATIVE_MODES; @@ -619,7 +623,7 @@ static_assert(COUNT(arm) == LOGICAL_AXES, "AXIS_RELATIVE_MODES must contain " _L static_assert(_test_btc_sample_start != 12.3f, "BTC_SAMPLE_START must be a whole number."); #endif #ifdef BTC_SAMPLE_RES - constexpr _btc_sample_res = BTC_SAMPLE_RES; + constexpr auto _btc_sample_res = BTC_SAMPLE_RES; constexpr decltype(_btc_sample_res) _test_btc_sample_res = 12.3f; static_assert(_test_btc_sample_res != 12.3f, "BTC_SAMPLE_RES must be a whole number."); #endif @@ -1959,6 +1963,8 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_CHAMBER 1000 requires CHAMBER_PULLUP_RESISTOR_OHMS, CHAMBER_RESISTANCE_25C_OHMS and CHAMBER_BETA in Configuration_adv.h." #elif TEMP_SENSOR_PROBE_IS_CUSTOM && !(defined(PROBE_PULLUP_RESISTOR_OHMS) && defined(PROBE_RESISTANCE_25C_OHMS) && defined(PROBE_BETA)) #error "TEMP_SENSOR_PROBE 1000 requires PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS and PROBE_BETA in Configuration_adv.h." +#elif TEMP_SENSOR_BOARD_IS_CUSTOM && !(defined(BOARD_PULLUP_RESISTOR_OHMS) && defined(BOARD_RESISTANCE_25C_OHMS) && defined(BOARD_BETA)) + #error "TEMP_SENSOR_BOARD 1000 requires BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS and BOARD_BETA in Configuration_adv.h." #elif TEMP_SENSOR_REDUNDANT_IS_CUSTOM && !(defined(REDUNDANT_PULLUP_RESISTOR_OHMS) && defined(REDUNDANT_RESISTANCE_25C_OHMS) && defined(REDUNDANT_BETA)) #error "TEMP_SENSOR_REDUNDANT 1000 requires REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS and REDUNDANT_BETA in Configuration_adv.h." #endif @@ -1966,14 +1972,14 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS /** * Required MAX31865 settings */ -#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 0) +#if TEMP_SENSOR_0_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E0)) #if !defined(MAX31865_SENSOR_WIRES_0) || !WITHIN(MAX31865_SENSOR_WIRES_0, 2, 4) #error "MAX31865_SENSOR_WIRES_0 must be defined as an integer between 2 and 4." #elif !defined(MAX31865_SENSOR_OHMS_0) || !defined(MAX31865_CALIBRATION_OHMS_0) #error "MAX31865_SENSOR_OHMS_0 and MAX31865_CALIBRATION_OHMS_0 must be set if TEMP_SENSOR_0/TEMP_SENSOR_REDUNDANT is MAX31865." #endif #endif -#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && TEMP_SENSOR_REDUNDANT_SOURCE == 1) +#if TEMP_SENSOR_1_IS_MAX31865 || (TEMP_SENSOR_REDUNDANT_IS_MAX31865 && REDUNDANT_TEMP_MATCH(SOURCE, E1)) #if !defined(MAX31865_SENSOR_WIRES_1) || !WITHIN(MAX31865_SENSOR_WIRES_1, 2, 4) #error "MAX31865_SENSOR_WIRES_1 must be defined as an integer between 2 and 4." #elif !defined(MAX31865_SENSOR_OHMS_1) || !defined(MAX31865_CALIBRATION_OHMS_1) @@ -1989,62 +1995,58 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_SOURCE." #elif !defined(TEMP_SENSOR_REDUNDANT_TARGET) #error "TEMP_SENSOR_REDUNDANT requires TEMP_SENSOR_REDUNDANT_TARGET." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == TEMP_SENSOR_REDUNDANT_TARGET + #elif REDUNDANT_TEMP_MATCH(SOURCE, TEMP_SENSOR_REDUNDANT_TARGET) #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be the same as TEMP_SENSOR_REDUNDANT_TARGET." - #elif TEMP_SENSOR_REDUNDANT_SOURCE < -5 || TEMP_SENSOR_REDUNDANT_SOURCE > 7 - #error "TEMP_SENSOR_REDUNDANT_SOURCE must be between -5 and 7." - #elif TEMP_SENSOR_REDUNDANT_TARGET < -5 || TEMP_SENSOR_REDUNDANT_TARGET > 7 - #error "TEMP_SENSOR_REDUNDANT_TARGET must be between -5 and 7." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -3 - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be -3 (not used)." - #elif TEMP_SENSOR_REDUNDANT_TARGET == -3 - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be -3 (not used)." #elif HAS_MULTI_HOTEND && TEMP_SENSOR_REDUNDANT_SOURCE < HOTENDS - #error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last TEMP_SENSOR used with a hotend; you can't use a sensor in the middle of two hotends." + #error "TEMP_SENSOR_REDUNDANT_SOURCE must be after the last used hotend TEMP_SENSOR." #endif - #if TEMP_SENSOR_REDUNDANT_SOURCE == 0 && HAS_HOTEND - #error "TEMP_SENSOR_REDUNDANT_SOURCE can not be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -5 && HAS_TEMP_COOLER - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Cooler (-5): TEMP_SENSOR_COOLER has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -4 && HAS_TEMP_PROBE - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Probe (-4): TEMP_SENSOR_PROBE has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -2 && HAS_TEMP_CHAMBER - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Chamber (-2): TEMP_SENSOR_CHAMBER has already defined the sensor." - #elif TEMP_SENSOR_REDUNDANT_SOURCE == -1 && HAS_TEMP_BED - #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be Bed (-1): TEMP_SENSOR_BED has already defined the sensor." + #if REDUNDANT_TEMP_MATCH(SOURCE, E0) && HAS_HOTEND + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be 0 if a hotend is used. E0 always uses TEMP_SENSOR_0." + #elif REDUNDANT_TEMP_MATCH(SOURCE, COOLER) && HAS_TEMP_COOLER + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be COOLER. TEMP_SENSOR_COOLER is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, PROBE) && HAS_TEMP_PROBE + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be PROBE. TEMP_SENSOR_PROBE is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, BOARD) && HAS_TEMP_BOARD + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BOARD. TEMP_SENSOR_BOARD is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, CHAMBER) && HAS_TEMP_CHAMBER + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be CHAMBER. TEMP_SENSOR_CHAMBER is in use." + #elif REDUNDANT_TEMP_MATCH(SOURCE, BED) && HAS_TEMP_BED + #error "TEMP_SENSOR_REDUNDANT_SOURCE can't be BED. TEMP_SENSOR_BED is in use." #endif - #if TEMP_SENSOR_REDUNDANT_TARGET == 0 && !PIN_EXISTS(TEMP_0) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 (0): requires TEMP_0_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 1 && !PIN_EXISTS(TEMP_1) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 (1): requires TEMP_1_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 2 && !PIN_EXISTS(TEMP_2) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 (2): requires TEMP_2_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 3 && !PIN_EXISTS(TEMP_3) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 (3): requires TEMP_3_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 4 && !PIN_EXISTS(TEMP_4) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 (4): requires TEMP_4_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 5 && !PIN_EXISTS(TEMP_5) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 (5): requires TEMP_5_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 6 && !PIN_EXISTS(TEMP_6) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 (6): requires TEMP_6_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == 7 && !PIN_EXISTS(TEMP_7) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 (7): requires TEMP_7_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && !PIN_EXISTS(TEMP_BED) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Bed (-1): requires TEMP_BED_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && !PIN_EXISTS(TEMP_CHAMBER) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Chamber (-2): requires TEMP_CHAMBER_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && !PIN_EXISTS(TEMP_PROBE) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Probe (-4): requires TEMP_PROBE_PIN" - #elif TEMP_SENSOR_REDUNDANT_TARGET == -5 && !PIN_EXISTS(TEMP_COOLER) - #error "TEMP_SENSOR_REDUNDANT_TARGET can't be Cooler (-5): requires TEMP_COOLER_PIN" + #if REDUNDANT_TEMP_MATCH(TARGET, E0) && !PIN_EXISTS(TEMP_0) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E0 without TEMP_0_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E1) && !PIN_EXISTS(TEMP_1) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E1 without TEMP_1_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E2) && !PIN_EXISTS(TEMP_2) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E2 without TEMP_2_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E3) && !PIN_EXISTS(TEMP_3) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E3 without TEMP_3_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E4) && !PIN_EXISTS(TEMP_4) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E4 without TEMP_4_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E5) && !PIN_EXISTS(TEMP_5) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E5 without TEMP_5_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E6) && !PIN_EXISTS(TEMP_6) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E6 without TEMP_6_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, E7) && !PIN_EXISTS(TEMP_7) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be E7 without TEMP_7_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, BED) && !PIN_EXISTS(TEMP_BED) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be BED without TEMP_BED_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && !PIN_EXISTS(TEMP_CHAMBER) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be CHAMBER without TEMP_CHAMBER_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && !PIN_EXISTS(TEMP_BOARD) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be BOARD without TEMP_BOARD_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && !PIN_EXISTS(TEMP_PROBE) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be PROBE without TEMP_PROBE_PIN defined." + #elif REDUNDANT_TEMP_MATCH(TARGET, COOLER) && !PIN_EXISTS(TEMP_COOLER) + #error "TEMP_SENSOR_REDUNDANT_TARGET can't be COOLER without TEMP_COOLER_PIN defined." #endif - #if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 && !PIN_EXISTS(TEMP_0_CS) - #error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 0 requires TEMP_0_CS_PIN." - #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 && !PIN_EXISTS(TEMP_1_CS) - #error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE 1 requires TEMP_1_CS_PIN." + #if TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) && !PIN_EXISTS(TEMP_0_CS) + #error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E0 requires TEMP_0_CS_PIN." + #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) && !PIN_EXISTS(TEMP_1_CS) + #error "TEMP_SENSOR_REDUNDANT MAX Thermocouple with TEMP_SENSOR_REDUNDANT_SOURCE E1 requires TEMP_1_CS_PIN." #endif #endif @@ -2209,6 +2211,28 @@ static_assert(Y_MAX_LENGTH >= Y_BED_SIZE, "Movement bounds (Y_MIN_POS, Y_MAX_POS #endif #endif +#if TEMP_SENSOR_PROBE + #if !PIN_EXISTS(TEMP_PROBE) + #error "TEMP_SENSOR_PROBE requires TEMP_PROBE_PIN." + #elif !HAS_TEMP_ADC_PROBE + #error "TEMP_PROBE_PIN must be an ADC pin." + #elif DISABLED(FIX_MOUNTED_PROBE) + #error "TEMP_SENSOR_PROBE shouldn't be set without FIX_MOUNTED_PROBE." + #endif +#endif + +#if TEMP_SENSOR_BOARD + #if !PIN_EXISTS(TEMP_BOARD) + #error "TEMP_SENSOR_BOARD requires TEMP_BOARD_PIN." + #elif !HAS_TEMP_ADC_BOARD + #error "TEMP_BOARD_PIN must be an ADC pin." + #elif ENABLED(THERMAL_PROTECTION_BOARD) && (!defined(BOARD_MINTEMP) || !defined(BOARD_MAXTEMP)) + #error "THERMAL_PROTECTION_BOARD requires BOARD_MINTEMP and BOARD_MAXTEMP." + #endif +#elif CONTROLLER_FAN_MIN_BOARD_TEMP + #error "CONTROLLER_FAN_MIN_BOARD_TEMP requires TEMP_SENSOR_BOARD." +#endif + #if ENABLED(LASER_COOLANT_FLOW_METER) && !(PIN_EXISTS(FLOWMETER) && ENABLED(LASER_FEATURE)) #error "LASER_COOLANT_FLOW_METER requires FLOWMETER_PIN and LASER_FEATURE." #endif diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h index 9c9e2d3ee2..ef569263f7 100644 --- a/Marlin/src/inc/Version.h +++ b/Marlin/src/inc/Version.h @@ -42,7 +42,7 @@ * version was tagged. */ #ifndef STRING_DISTRIBUTION_DATE - #define STRING_DISTRIBUTION_DATE "2021-07-07" + #define STRING_DISTRIBUTION_DATE "2021-07-21" #endif /** diff --git a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp index edb17b69c0..3324819955 100644 --- a/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp +++ b/Marlin/src/lcd/TFTGLCD/marlinui_TFTGLCD.cpp @@ -57,6 +57,18 @@ #include "../../gcode/parser.h" #endif +#if EITHER(HAS_COOLER, LASER_COOLANT_FLOW_METER) + #include "../../feature/cooler.h" +#endif + +#if ENABLED(I2C_AMMETER) + #include "../../feature/ammeter.h" +#endif + +#if HAS_CUTTER + #include "../../feature/spindle_laser.h" +#endif + #if ENABLED(AUTO_BED_LEVELING_UBL) #include "../../feature/bedlevel/bedlevel.h" #endif @@ -64,12 +76,12 @@ TFTGLCD lcd; #define ICON_LOGO B00000001 -#define ICON_TEMP1 B00000010 //hotend 1 -#define ICON_TEMP2 B00000100 //hotend 2 -#define ICON_TEMP3 B00001000 //hotend 3 +#define ICON_TEMP1 B00000010 // Hotend 1 +#define ICON_TEMP2 B00000100 // Hotend 2 +#define ICON_TEMP3 B00001000 // Hotend 3 #define ICON_BED B00010000 #define ICON_FAN B00100000 -#define ICON_HOT B01000000 //when any T > 50deg +#define ICON_HOT B01000000 // When any T > 50deg #define PIC_MASK 0x7F // LEDs not used, for compatibility with Smoothieware @@ -433,69 +445,161 @@ FORCE_INLINE void _draw_axis_value(const AxisEnum axis, const char *value, const lcd_put_u8str(value); } -FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *prefix, const bool blink) { - uint8_t pic_hot_bits; - #if HAS_HEATED_BED - const bool isBed = heater_id < 0; - const celsius_t t1 = (isBed ? thermalManager.wholeDegBed() : thermalManager.wholeDegHotend(heater_id)), - t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id)); - #else - const celsius_t t1 = thermalManager.wholeDegHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id); - #endif +#if HAS_HOTEND || HAS_HEATED_BED - #if HOTENDS < 2 - if (heater_id == H_E0) { - lcd.setCursor(2, 5); lcd.print(prefix); //HE - lcd.setCursor(1, 6); lcd.print(i16tostr3rj(t1)); - lcd.setCursor(1, 7); - } - else { - lcd.setCursor(6, 5); lcd.print(prefix); //BED - lcd.setCursor(6, 6); lcd.print(i16tostr3rj(t1)); - lcd.setCursor(6, 7); - } - #else - if (heater_id > H_BED) { - lcd.setCursor(heater_id * 4, 5); lcd.print(prefix); // HE1 or HE2 or HE3 - lcd.setCursor(heater_id * 4, 6); lcd.print(i16tostr3rj(t1)); - lcd.setCursor(heater_id * 4, 7); - } - else { - lcd.setCursor(13, 5); lcd.print(prefix); //BED - lcd.setCursor(13, 6); lcd.print(i16tostr3rj(t1)); - lcd.setCursor(13, 7); - } - #endif // HOTENDS <= 1 + FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *prefix, const bool blink) { + uint8_t pic_hot_bits; + #if HAS_HEATED_BED + const bool isBed = heater_id < 0; + const celsius_t t1 = (isBed ? thermalManager.wholeDegBed() : thermalManager.wholeDegHotend(heater_id)), + t2 = (isBed ? thermalManager.degTargetBed() : thermalManager.degTargetHotend(heater_id)); + #else + const celsius_t t1 = thermalManager.wholeDegHotend(heater_id), t2 = thermalManager.degTargetHotend(heater_id); + #endif - #if !HEATER_IDLE_HANDLER - UNUSED(blink); - #else - if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) { - lcd.write(' '); - if (t2 >= 10) lcd.write(' '); - if (t2 >= 100) lcd.write(' '); - } - else - #endif // !HEATER_IDLE_HANDLER - lcd.print(i16tostr3rj(t2)); + #if HOTENDS < 2 + if (heater_id == H_E0) { + lcd.setCursor(2, 5); lcd.print(prefix); //HE + lcd.setCursor(1, 6); lcd.print(i16tostr3rj(t1)); + lcd.setCursor(1, 7); + } + else { + lcd.setCursor(6, 5); lcd.print(prefix); //BED + lcd.setCursor(6, 6); lcd.print(i16tostr3rj(t1)); + lcd.setCursor(6, 7); + } + #else + if (heater_id > H_BED) { + lcd.setCursor(heater_id * 4, 5); lcd.print(prefix); // HE1 or HE2 or HE3 + lcd.setCursor(heater_id * 4, 6); lcd.print(i16tostr3rj(t1)); + lcd.setCursor(heater_id * 4, 7); + } + else { + lcd.setCursor(13, 5); lcd.print(prefix); //BED + lcd.setCursor(13, 6); lcd.print(i16tostr3rj(t1)); + lcd.setCursor(13, 7); + } + #endif // HOTENDS <= 1 - switch (heater_id) { - case H_BED: pic_hot_bits = ICON_BED; break; - case H_E0: pic_hot_bits = ICON_TEMP1; break; - case H_E1: pic_hot_bits = ICON_TEMP2; break; - case H_E2: pic_hot_bits = ICON_TEMP3; - default: break; + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #else + if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) { + lcd.write(' '); + if (t2 >= 10) lcd.write(' '); + if (t2 >= 100) lcd.write(' '); + } + else + #endif // !HEATER_IDLE_HANDLER + lcd.print(i16tostr3rj(t2)); + + switch (heater_id) { + case H_BED: pic_hot_bits = ICON_BED; break; + case H_E0: pic_hot_bits = ICON_TEMP1; break; + case H_E1: pic_hot_bits = ICON_TEMP2; break; + case H_E2: pic_hot_bits = ICON_TEMP3; + default: break; + } + + if (t2) picBits |= pic_hot_bits; + else picBits &= ~pic_hot_bits; + + if (t1 > 50) hotBits |= pic_hot_bits; + else hotBits &= ~pic_hot_bits; + + if (hotBits) picBits |= ICON_HOT; + else picBits &= ~ICON_HOT; } - if (t2) picBits |= pic_hot_bits; - else picBits &= ~pic_hot_bits; +#endif // HAS_HOTEND || HAS_HEATED_BED - if (t1 > 50) hotBits |= pic_hot_bits; - else hotBits &= ~pic_hot_bits; +#if HAS_COOLER - if (hotBits) picBits |= ICON_HOT; - else picBits &= ~ICON_HOT; -} + FORCE_INLINE void _draw_cooler_status(const bool blink) { + const celsius_t t2 = thermalManager.degTargetCooler(); + + lcd.setCursor(0, 5); lcd_put_u8str_P(PSTR("COOL")); + lcd.setCursor(1, 6); lcd_put_u8str(i16tostr3rj(thermalManager.wholeDegCooler())); + lcd.setCursor(1, 7); + + #if !HEATER_IDLE_HANDLER + UNUSED(blink); + #else + if (!blink && thermalManager.heater_idle[thermalManager.idle_index_for_id(heater_id)].timed_out) { + lcd_put_wchar(' '); + if (t2 >= 10) lcd_put_wchar(' '); + if (t2 >= 100) lcd_put_wchar(' '); + } + else + #endif + lcd_put_u8str(i16tostr3left(t2)); + + lcd_put_wchar(' '); + if (t2 < 10) lcd_put_wchar(' '); + + if (t2) picBits |= ICON_TEMP1; + else picBits &= ~ICON_TEMP1; + } + +#endif // HAS_COOLER + +#if ENABLED(LASER_COOLANT_FLOW_METER) + + FORCE_INLINE void _draw_flowmeter_status() { + lcd.setCursor(5, 5); lcd_put_u8str_P(PSTR("FLOW")); + lcd.setCursor(7, 6); lcd_put_wchar('L'); + lcd.setCursor(6, 7); lcd_put_u8str(ftostr11ns(cooler.flowrate)); + + if (cooler.flowrate) picBits |= ICON_FAN; + else picBits &= ~ICON_FAN; + } + +#endif + +#if ENABLED(I2C_AMMETER) + + FORCE_INLINE void _draw_ammeter_status() { + lcd.setCursor(10, 5); lcd_put_u8str_P(PSTR("ILAZ")); + ammeter.read(); + lcd.setCursor(11, 6); + if (ammeter.current <= 0.999f) + { + lcd_put_u8str("mA"); + lcd.setCursor(10, 7); + lcd_put_wchar(' '); lcd_put_u8str(ui16tostr3rj(uint16_t(ammeter.current * 1000 + 0.5f))); + } + else { + lcd_put_u8str(" A"); + lcd.setCursor(10, 7); + lcd_put_u8str(ftostr12ns(ammeter.current)); + } + + if (ammeter.current) picBits |= ICON_BED; + else picBits &= ~ICON_BED; + } + +#endif // I2C_AMMETER + +#if HAS_CUTTER + + FORCE_INLINE void _draw_cutter_status() { + lcd.setCursor(15, 5); lcd_put_u8str_P(PSTR("CUTT")); + #if CUTTER_UNIT_IS(RPM) + lcd.setCursor(16, 6); lcd_put_u8str_P(PSTR("RPM")); + lcd.setCursor(15, 7); lcd_put_u8str(ftostr31ns(float(cutter.unitPower) / 1000)); + lcd_put_wchar('K'); + #elif CUTTER_UNIT_IS(PERCENT) + lcd.setCursor(17, 6); lcd_put_wchar('%'); + lcd.setCursor(18, 7); lcd_put_u8str(cutter_power2str(cutter.unitPower)); + #else + lcd.setCursor(17, 7); lcd_put_u8str(cutter_power2str(cutter.unitPower)); + #endif + + if (cutter.unitPower) picBits |= ICON_HOT; + else picBits &= ~ICON_HOT; + } + +#endif // HAS_CUTTER #if HAS_PRINT_PROGRESS @@ -533,7 +637,7 @@ FORCE_INLINE void _draw_heater_status(const heater_id_t heater_id, const char *p } } -#endif +#endif // LCD_PROGRESS_BAR void MarlinUI::draw_status_message(const bool blink) { if (!PanelDetected) return; @@ -648,6 +752,19 @@ or or +|X 000 Y 000 Z 000.00| +|FR100% SD100% C--:--| +| Progress bar line | +|Status message | +| | +|COOL FLOW ILAZ CUTT | +| ttc L mA RPM | +| tts f.f aaa rr.rK| +| ICO ICO ICO ICO | +| ICO ICO ICO ICO | + +or + Equal to 24x10 text LCD |X 000 Y 000 Z 000.00 | @@ -745,50 +862,61 @@ void MarlinUI::draw_status_screen() { #endif // - // Line 6..8 Temperatures, FAN + // Line 6..8 Temperatures, FAN for printer or Cooler, Flowmetter, Ampermeter, Cutter for laser/spindle // - #if HOTENDS < 2 - _draw_heater_status(H_E0, "HE", blink); // Hotend Temperature - #else - _draw_heater_status(H_E0, "HE1", blink); // Hotend 1 Temperature - _draw_heater_status(H_E1, "HE2", blink); // Hotend 2 Temperature - #if HOTENDS > 2 - _draw_heater_status(H_E2, "HE3", blink); // Hotend 3 Temperature - #endif - #endif - - #if HAS_HEATED_BED - #if HAS_LEVELING - _draw_heater_status(H_BED, (planner.leveling_active && blink ? "___" : "BED"), blink); - #else - _draw_heater_status(H_BED, "BED", blink); - #endif - #endif - - #if HAS_FAN - uint16_t spd = thermalManager.fan_speed[0]; - #if ENABLED(ADAPTIVE_FAN_SLOWING) - if (!blink) spd = thermalManager.scaledFanSpeed(0, spd); - #endif - uint16_t per = thermalManager.pwmToPercent(spd); + #if HAS_HOTEND #if HOTENDS < 2 - #define FANX 11 + _draw_heater_status(H_E0, "HE", blink); // Hotend Temperature #else - #define FANX 17 + _draw_heater_status(H_E0, "HE1", blink); // Hotend 1 Temperature + _draw_heater_status(H_E1, "HE2", blink); // Hotend 2 Temperature + #if HOTENDS > 2 + _draw_heater_status(H_E2, "HE3", blink); // Hotend 3 Temperature + #endif #endif - lcd.setCursor(FANX, 5); lcd_put_u8str_P(PSTR("FAN")); - lcd.setCursor(FANX + 1, 6); lcd.write('%'); - lcd.setCursor(FANX, 7); - lcd.print(i16tostr3rj(per)); - if (TERN0(HAS_FAN0, thermalManager.fan_speed[0]) || TERN0(HAS_FAN1, thermalManager.fan_speed[1]) || TERN0(HAS_FAN2, thermalManager.fan_speed[2])) - picBits |= ICON_FAN; - else - picBits &= ~ICON_FAN; + #if HAS_HEATED_BED + #if HAS_LEVELING + _draw_heater_status(H_BED, (planner.leveling_active && blink ? "___" : "BED"), blink); + #else + _draw_heater_status(H_BED, "BED", blink); + #endif + #endif - #endif // HAS_FAN + #if HAS_FAN + uint16_t spd = thermalManager.fan_speed[0]; + #if ENABLED(ADAPTIVE_FAN_SLOWING) + if (!blink) spd = thermalManager.scaledFanSpeed(0, spd); + #endif + uint16_t per = thermalManager.pwmToPercent(spd); + + #if HOTENDS < 2 + #define FANX 11 + #else + #define FANX 17 + #endif + lcd.setCursor(FANX, 5); lcd_put_u8str_P(PSTR("FAN")); + lcd.setCursor(FANX + 1, 6); lcd.write('%'); + lcd.setCursor(FANX, 7); + lcd.print(i16tostr3rj(per)); + + if (TERN0(HAS_FAN0, thermalManager.fan_speed[0]) || TERN0(HAS_FAN1, thermalManager.fan_speed[1]) || TERN0(HAS_FAN2, thermalManager.fan_speed[2])) + picBits |= ICON_FAN; + else + picBits &= ~ICON_FAN; + + #endif // HAS_FAN + + #else + + TERN_(HAS_COOLER, _draw_cooler_status(blink)); + TERN_(LASER_COOLANT_FLOW_METER, _draw_flowmeter_status()); + TERN_(I2C_AMMETER, _draw_ammeter_status()); + TERN_(HAS_CUTTER, _draw_cutter_status()); + + #endif // // Line 9, 10 - icons diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h index 8a707ab41a..98a8f0a98a 100644 --- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h +++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h @@ -23,7 +23,7 @@ // Use this file to select the com driver for device drivers that are NOT in the U8G library -#include +#include #ifndef U8G_HAL_LINKS // Defined by LPC1768/9 environments in platform.ini diff --git a/Marlin/src/lcd/dogm/dogm_Statusscreen.h b/Marlin/src/lcd/dogm/dogm_Statusscreen.h index 6aa2bab0da..dfbf7b4291 100644 --- a/Marlin/src/lcd/dogm/dogm_Statusscreen.h +++ b/Marlin/src/lcd/dogm/dogm_Statusscreen.h @@ -624,7 +624,7 @@ #define STATUS_AMMETER_X (LCD_PIXEL_WIDTH - (STATUS_AMMETER_BYTEWIDTH + STATUS_FLOWMETER_BYTEWIDTH + STATUS_FAN_BYTEWIDTH + STATUS_CUTTER_BYTEWIDTH + STATUS_COOLER_BYTEWIDTH) * 8) #endif #ifndef STATUS_AMMETER_HEIGHT - #define STATUS_AMMETER_HEIGHT(S) (sizeof(status_ammeter_bmp1) / (STATUS_AMMETER_BYTEWIDTH)) + #define STATUS_AMMETER_HEIGHT(S) (sizeof(status_ammeter_bmp_mA) / (STATUS_AMMETER_BYTEWIDTH)) #endif #ifndef STATUS_AMMETER_Y #define STATUS_AMMETER_Y(S) (18 - STATUS_AMMETER_HEIGHT(S)) @@ -633,8 +633,8 @@ #define STATUS_AMMETER_TEXT_X (STATUS_AMMETER_X + 7) #endif static_assert( - sizeof(status_ammeter_bmp1) == (STATUS_AMMETER_BYTEWIDTH) * STATUS_AMMETER_HEIGHT(0), - "Status ammeter bitmap (status_ammeter_bmp1) dimensions don't match data." + sizeof(status_ammeter_bmp_mA) == (STATUS_AMMETER_BYTEWIDTH) * STATUS_AMMETER_HEIGHT(0), + "Status ammeter bitmap (status_ammeter_bmp_mA) dimensions don't match data." ); #endif diff --git a/Marlin/src/lcd/dogm/fontdata/fontdata_6x9_marlin.h b/Marlin/src/lcd/dogm/fontdata/fontdata_6x9_marlin.h index cd9cb3cdc9..524ff18778 100644 --- a/Marlin/src/lcd/dogm/fontdata/fontdata_6x9_marlin.h +++ b/Marlin/src/lcd/dogm/fontdata/fontdata_6x9_marlin.h @@ -32,7 +32,7 @@ X Font ascent = 6 descent=-2 Max Font ascent = 7 descent=-2 */ -#include +#include const u8g_fntpgm_uint8_t u8g_font_6x9[2434] U8G_FONT_SECTION(".progmem.u8g_font_6x9") = { 0x00,0x06,0x09,0x00,0xFE,0x06,0x02,0x0F,0x03,0x84,0x01,0xFF,0xFE,0x07,0xFE,0x06, 0xFE,0x05,0x07,0x07,0x00,0x00,0x00,0x40,0xF0,0xC8,0x88,0x98,0x78,0x10,0x05,0x07, diff --git a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h index b4b615da4d..0a7ece8601 100644 --- a/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h +++ b/Marlin/src/lcd/dogm/fontdata/fontdata_ISO10646_1.h @@ -16,7 +16,7 @@ * along with this program. If not, see . * */ -#include +#include #if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7) // reduced font (only symbols 1 - 127) - saves about 1278 bytes of FLASH diff --git a/Marlin/src/lcd/dogm/fontdata/langdata.h b/Marlin/src/lcd/dogm/fontdata/langdata.h new file mode 100644 index 0000000000..746a3bd0b4 --- /dev/null +++ b/Marlin/src/lcd/dogm/fontdata/langdata.h @@ -0,0 +1,23 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include + +#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_an.h b/Marlin/src/lcd/dogm/fontdata/langdata_an.h index ffda82764f..fb0fdcf893 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_an.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_an.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_an[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_bg.h b/Marlin/src/lcd/dogm/fontdata/langdata_bg.h index c506f87933..20cd7b9ed7 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_bg.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_bg.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_8_144_149[96] U8G_FONT_SECTION("fontpage_8_144_149") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x90,0x95,0x00,0x07,0xFF,0x00, @@ -64,14 +66,13 @@ const u8g_fntpgm_uint8_t fontpage_8_206_207[39] U8G_FONT_SECTION("fontpage_8_206 0x00,0x05,0x05,0x05,0x06,0x00,0x00,0x90,0xA8,0xE8,0xA8,0x90,0x04,0x05,0x05,0x06, 0x01,0x00,0x70,0x90,0x70,0x50,0x90}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(8, 144, 149, fontpage_8_144_149), // 'А' -- 'Е' - FONTDATA_ITEM(8, 151, 152, fontpage_8_151_152), // 'З' -- 'И' - FONTDATA_ITEM(8, 154, 164, fontpage_8_154_164), // 'К' -- 'Ф' - FONTDATA_ITEM(8, 166, 166, fontpage_8_166_166), // 'Ц' -- 'Ц' - FONTDATA_ITEM(8, 175, 195, fontpage_8_175_195), // 'Я' -- 'у' - FONTDATA_ITEM(8, 197, 200, fontpage_8_197_200), // 'х' -- 'ш' - FONTDATA_ITEM(8, 202, 202, fontpage_8_202_202), // 'ъ' -- 'ъ' - FONTDATA_ITEM(8, 206, 207, fontpage_8_206_207), // 'ю' -- 'я' +static const uxg_fontinfo_t g_fontinfo_bg[] PROGMEM = { + FONTDATA_ITEM(8, 144, 149, fontpage_8_144_149), // 'А' -- 'Е' + FONTDATA_ITEM(8, 151, 152, fontpage_8_151_152), // 'З' -- 'И' + FONTDATA_ITEM(8, 154, 164, fontpage_8_154_164), // 'К' -- 'Ф' + FONTDATA_ITEM(8, 166, 166, fontpage_8_166_166), // 'Ц' -- 'Ц' + FONTDATA_ITEM(8, 175, 195, fontpage_8_175_195), // 'Я' -- 'у' + FONTDATA_ITEM(8, 197, 200, fontpage_8_197_200), // 'х' -- 'ш' + FONTDATA_ITEM(8, 202, 202, fontpage_8_202_202), // 'ъ' -- 'ъ' + FONTDATA_ITEM(8, 206, 207, fontpage_8_206_207), // 'ю' -- 'я' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_ca.h b/Marlin/src/lcd/dogm/fontdata/langdata_ca.h index ffda82764f..deac3678b5 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_ca.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_ca.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_ca[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_cz.h b/Marlin/src/lcd/dogm/fontdata/langdata_cz.h index 754459d9af..39f03f3a97 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_cz.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_cz.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_140_141[47] U8G_FONT_SECTION("fontpage_2_140_141") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x8C,0x8D,0x00,0x0A,0x00,0x00, @@ -40,15 +42,14 @@ const u8g_fntpgm_uint8_t fontpage_2_253_254[47] U8G_FONT_SECTION("fontpage_2_253 0x00,0x05,0x0A,0x0A,0x06,0x00,0x00,0x50,0x20,0x00,0xF8,0x08,0x10,0x20,0x40,0x80, 0xF8,0x05,0x08,0x08,0x06,0x00,0x00,0x50,0x20,0x00,0xF8,0x10,0x20,0x40,0xF8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 140, 141, fontpage_2_140_141), // 'Č' -- 'č' - FONTDATA_ITEM(2, 143, 143, fontpage_2_143_143), // 'ď' -- 'ď' - FONTDATA_ITEM(2, 154, 155, fontpage_2_154_155), // 'Ě' -- 'ě' - FONTDATA_ITEM(2, 200, 200, fontpage_2_200_200), // 'ň' -- 'ň' - FONTDATA_ITEM(2, 216, 217, fontpage_2_216_217), // 'Ř' -- 'ř' - FONTDATA_ITEM(2, 224, 225, fontpage_2_224_225), // 'Š' -- 'š' - FONTDATA_ITEM(2, 229, 229, fontpage_2_229_229), // 'ť' -- 'ť' - FONTDATA_ITEM(2, 239, 239, fontpage_2_239_239), // 'ů' -- 'ů' - FONTDATA_ITEM(2, 253, 254, fontpage_2_253_254), // 'Ž' -- 'ž' +static const uxg_fontinfo_t g_fontinfo_cz[] PROGMEM = { + FONTDATA_ITEM(2, 140, 141, fontpage_2_140_141), // 'Č' -- 'č' + FONTDATA_ITEM(2, 143, 143, fontpage_2_143_143), // 'ď' -- 'ď' + FONTDATA_ITEM(2, 154, 155, fontpage_2_154_155), // 'Ě' -- 'ě' + FONTDATA_ITEM(2, 200, 200, fontpage_2_200_200), // 'ň' -- 'ň' + FONTDATA_ITEM(2, 216, 217, fontpage_2_216_217), // 'Ř' -- 'ř' + FONTDATA_ITEM(2, 224, 225, fontpage_2_224_225), // 'Š' -- 'š' + FONTDATA_ITEM(2, 229, 229, fontpage_2_229_229), // 'ť' -- 'ť' + FONTDATA_ITEM(2, 239, 239, fontpage_2_239_239), // 'ů' -- 'ů' + FONTDATA_ITEM(2, 253, 254, fontpage_2_253_254), // 'Ž' -- 'ž' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_da.h b/Marlin/src/lcd/dogm/fontdata/langdata_da.h index ffda82764f..ad8df9a429 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_da.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_da.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_da[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_de.h b/Marlin/src/lcd/dogm/fontdata/langdata_de.h index ffda82764f..44230fa302 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_de.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_de.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_de[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_el.h b/Marlin/src/lcd/dogm/fontdata/langdata_el.h index 4b545f2284..6fefab9c61 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_el.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_el.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_7_136_136[33] U8G_FONT_SECTION("fontpage_7_136_136") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x88,0x88,0x00,0x0A,0x00,0x00, @@ -75,16 +77,15 @@ const u8g_fntpgm_uint8_t fontpage_64_166_166[24] U8G_FONT_SECTION("fontpage_64_1 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xA6,0xA6,0x00,0x01,0x00,0x00, 0x00,0x05,0x01,0x01,0x06,0x00,0x00,0xA8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(7, 136, 136, fontpage_7_136_136), // 'Έ' -- 'Έ' - FONTDATA_ITEM(7, 145, 157, fontpage_7_145_157), // 'Α' -- 'Ν' - FONTDATA_ITEM(7, 159, 161, fontpage_7_159_161), // 'Ο' -- 'Ρ' - FONTDATA_ITEM(7, 163, 167, fontpage_7_163_167), // 'Σ' -- 'Χ' - FONTDATA_ITEM(7, 172, 175, fontpage_7_172_175), // 'ά' -- 'ί' - FONTDATA_ITEM(7, 177, 181, fontpage_7_177_181), // 'α' -- 'ε' - FONTDATA_ITEM(7, 183, 199, fontpage_7_183_199), // 'η' -- 'χ' - FONTDATA_ITEM(7, 201, 201, fontpage_7_201_201), // 'ω' -- 'ω' - FONTDATA_ITEM(7, 204, 206, fontpage_7_204_206), // 'ό' -- 'ώ' - FONTDATA_ITEM(64, 166, 166, fontpage_64_166_166), // '…' -- '…' +static const uxg_fontinfo_t g_fontinfo_el[] PROGMEM = { + FONTDATA_ITEM(7, 136, 136, fontpage_7_136_136), // 'Έ' -- 'Έ' + FONTDATA_ITEM(7, 145, 157, fontpage_7_145_157), // 'Α' -- 'Ν' + FONTDATA_ITEM(7, 159, 161, fontpage_7_159_161), // 'Ο' -- 'Ρ' + FONTDATA_ITEM(7, 163, 167, fontpage_7_163_167), // 'Σ' -- 'Χ' + FONTDATA_ITEM(7, 172, 175, fontpage_7_172_175), // 'ά' -- 'ί' + FONTDATA_ITEM(7, 177, 181, fontpage_7_177_181), // 'α' -- 'ε' + FONTDATA_ITEM(7, 183, 199, fontpage_7_183_199), // 'η' -- 'χ' + FONTDATA_ITEM(7, 201, 201, fontpage_7_201_201), // 'ω' -- 'ω' + FONTDATA_ITEM(7, 204, 206, fontpage_7_204_206), // 'ό' -- 'ώ' + FONTDATA_ITEM(64, 166, 166, fontpage_64_166_166), // '…' -- '…' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_el_gr.h b/Marlin/src/lcd/dogm/fontdata/langdata_el_gr.h index 4b545f2284..8d7cba8615 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_el_gr.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_el_gr.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_7_136_136[33] U8G_FONT_SECTION("fontpage_7_136_136") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x88,0x88,0x00,0x0A,0x00,0x00, @@ -75,16 +77,15 @@ const u8g_fntpgm_uint8_t fontpage_64_166_166[24] U8G_FONT_SECTION("fontpage_64_1 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xA6,0xA6,0x00,0x01,0x00,0x00, 0x00,0x05,0x01,0x01,0x06,0x00,0x00,0xA8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(7, 136, 136, fontpage_7_136_136), // 'Έ' -- 'Έ' - FONTDATA_ITEM(7, 145, 157, fontpage_7_145_157), // 'Α' -- 'Ν' - FONTDATA_ITEM(7, 159, 161, fontpage_7_159_161), // 'Ο' -- 'Ρ' - FONTDATA_ITEM(7, 163, 167, fontpage_7_163_167), // 'Σ' -- 'Χ' - FONTDATA_ITEM(7, 172, 175, fontpage_7_172_175), // 'ά' -- 'ί' - FONTDATA_ITEM(7, 177, 181, fontpage_7_177_181), // 'α' -- 'ε' - FONTDATA_ITEM(7, 183, 199, fontpage_7_183_199), // 'η' -- 'χ' - FONTDATA_ITEM(7, 201, 201, fontpage_7_201_201), // 'ω' -- 'ω' - FONTDATA_ITEM(7, 204, 206, fontpage_7_204_206), // 'ό' -- 'ώ' - FONTDATA_ITEM(64, 166, 166, fontpage_64_166_166), // '…' -- '…' +static const uxg_fontinfo_t g_fontinfo_el_gr[] PROGMEM = { + FONTDATA_ITEM(7, 136, 136, fontpage_7_136_136), // 'Έ' -- 'Έ' + FONTDATA_ITEM(7, 145, 157, fontpage_7_145_157), // 'Α' -- 'Ν' + FONTDATA_ITEM(7, 159, 161, fontpage_7_159_161), // 'Ο' -- 'Ρ' + FONTDATA_ITEM(7, 163, 167, fontpage_7_163_167), // 'Σ' -- 'Χ' + FONTDATA_ITEM(7, 172, 175, fontpage_7_172_175), // 'ά' -- 'ί' + FONTDATA_ITEM(7, 177, 181, fontpage_7_177_181), // 'α' -- 'ε' + FONTDATA_ITEM(7, 183, 199, fontpage_7_183_199), // 'η' -- 'χ' + FONTDATA_ITEM(7, 201, 201, fontpage_7_201_201), // 'ω' -- 'ω' + FONTDATA_ITEM(7, 204, 206, fontpage_7_204_206), // 'ό' -- 'ώ' + FONTDATA_ITEM(64, 166, 166, fontpage_64_166_166), // '…' -- '…' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_en.h b/Marlin/src/lcd/dogm/fontdata/langdata_en.h index ffda82764f..a69161b562 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_en.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_en.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_en[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_es.h b/Marlin/src/lcd/dogm/fontdata/langdata_es.h index ffda82764f..a8ddb44ce8 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_es.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_es.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_es[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_eu.h b/Marlin/src/lcd/dogm/fontdata/langdata_eu.h index ffda82764f..3fdc0253bc 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_eu.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_eu.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_eu[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_fi.h b/Marlin/src/lcd/dogm/fontdata/langdata_fi.h index ffda82764f..25e1927537 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_fi.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_fi.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_fi[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_fr.h b/Marlin/src/lcd/dogm/fontdata/langdata_fr.h index ffda82764f..a3cc160c97 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_fr.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_fr.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_fr[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_gl.h b/Marlin/src/lcd/dogm/fontdata/langdata_gl.h index ffda82764f..2f93d05dbe 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_gl.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_gl.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_gl[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_hr.h b/Marlin/src/lcd/dogm/fontdata/langdata_hr.h index cdb2cc7d1a..b5e4d544cc 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_hr.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_hr.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_135_135[31] U8G_FONT_SECTION("fontpage_2_135_135") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x87,0x87,0x00,0x08,0x00,0x00, @@ -22,11 +24,10 @@ const u8g_fntpgm_uint8_t fontpage_2_254_254[31] U8G_FONT_SECTION("fontpage_2_254 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xFE,0xFE,0x00,0x08,0x00,0x00, 0x00,0x05,0x08,0x08,0x06,0x00,0x00,0x50,0x20,0x00,0xF8,0x10,0x20,0x40,0xF8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 135, 135, fontpage_2_135_135), // 'ć' -- 'ć' - FONTDATA_ITEM(2, 140, 141, fontpage_2_140_141), // 'Č' -- 'č' - FONTDATA_ITEM(2, 145, 145, fontpage_2_145_145), // 'đ' -- 'đ' - FONTDATA_ITEM(2, 225, 225, fontpage_2_225_225), // 'š' -- 'š' - FONTDATA_ITEM(2, 254, 254, fontpage_2_254_254), // 'ž' -- 'ž' +static const uxg_fontinfo_t g_fontinfo_hr[] PROGMEM = { + FONTDATA_ITEM(2, 135, 135, fontpage_2_135_135), // 'ć' -- 'ć' + FONTDATA_ITEM(2, 140, 141, fontpage_2_140_141), // 'Č' -- 'č' + FONTDATA_ITEM(2, 145, 145, fontpage_2_145_145), // 'đ' -- 'đ' + FONTDATA_ITEM(2, 225, 225, fontpage_2_225_225), // 'š' -- 'š' + FONTDATA_ITEM(2, 254, 254, fontpage_2_254_254), // 'ž' -- 'ž' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_hu.h b/Marlin/src/lcd/dogm/fontdata/langdata_hu.h index 8c15a3890a..450662a8c9 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_hu.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_hu.h @@ -3,13 +3,14 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_241_241[31] U8G_FONT_SECTION("fontpage_2_241_241") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xF1,0xF1,0x00,0x08,0x00,0x00, 0x00,0x05,0x08,0x08,0x06,0x00,0x00,0x48,0x90,0x00,0x88,0x88,0x88,0x88,0x70}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 241, 241, fontpage_2_241_241), // 'ű' -- 'ű' +static const uxg_fontinfo_t g_fontinfo_hu[] PROGMEM = { + FONTDATA_ITEM(2, 241, 241, fontpage_2_241_241), // 'ű' -- 'ű' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_it.h b/Marlin/src/lcd/dogm/fontdata/langdata_it.h index ffda82764f..1a41a794fa 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_it.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_it.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_it[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_jp_kana.h b/Marlin/src/lcd/dogm/fontdata/langdata_jp_kana.h index 01316d4c13..dc483b7d2b 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_jp_kana.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_jp_kana.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_97_161_164[65] U8G_FONT_SECTION("fontpage_97_161_164") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xA1,0xA4,0x00,0x07,0x00,0x00, @@ -94,18 +96,17 @@ const u8g_fntpgm_uint8_t fontpage_97_252_252[25] U8G_FONT_SECTION("fontpage_97_2 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xFC,0xFC,0x00,0x05,0x00,0x00, 0x00,0x05,0x02,0x02,0x06,0x00,0x03,0x80,0x78}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(97, 161, 164, fontpage_97_161_164), // 'ァ' -- 'イ' - FONTDATA_ITEM(97, 166, 166, fontpage_97_166_166), // 'ウ' -- 'ウ' - FONTDATA_ITEM(97, 168, 168, fontpage_97_168_168), // 'エ' -- 'エ' - FONTDATA_ITEM(97, 170, 187, fontpage_97_170_187), // 'オ' -- 'セ' - FONTDATA_ITEM(97, 189, 193, fontpage_97_189_193), // 'ソ' -- 'チ' - FONTDATA_ITEM(97, 195, 211, fontpage_97_195_211), // 'ッ' -- 'ビ' - FONTDATA_ITEM(97, 213, 217, fontpage_97_213_217), // 'フ' -- 'ベ' - FONTDATA_ITEM(97, 219, 220, fontpage_97_219_220), // 'ホ' -- 'ボ' - FONTDATA_ITEM(97, 222, 223, fontpage_97_222_223), // 'マ' -- 'ミ' - FONTDATA_ITEM(97, 225, 237, fontpage_97_225_237), // 'メ' -- 'ロ' - FONTDATA_ITEM(97, 242, 243, fontpage_97_242_243), // 'ヲ' -- 'ン' - FONTDATA_ITEM(97, 252, 252, fontpage_97_252_252), // 'ー' -- 'ー' +static const uxg_fontinfo_t g_fontinfo_jp_kana[] PROGMEM = { + FONTDATA_ITEM(97, 161, 164, fontpage_97_161_164), // 'ァ' -- 'イ' + FONTDATA_ITEM(97, 166, 166, fontpage_97_166_166), // 'ウ' -- 'ウ' + FONTDATA_ITEM(97, 168, 168, fontpage_97_168_168), // 'エ' -- 'エ' + FONTDATA_ITEM(97, 170, 187, fontpage_97_170_187), // 'オ' -- 'セ' + FONTDATA_ITEM(97, 189, 193, fontpage_97_189_193), // 'ソ' -- 'チ' + FONTDATA_ITEM(97, 195, 211, fontpage_97_195_211), // 'ッ' -- 'ビ' + FONTDATA_ITEM(97, 213, 217, fontpage_97_213_217), // 'フ' -- 'ベ' + FONTDATA_ITEM(97, 219, 220, fontpage_97_219_220), // 'ホ' -- 'ボ' + FONTDATA_ITEM(97, 222, 223, fontpage_97_222_223), // 'マ' -- 'ミ' + FONTDATA_ITEM(97, 225, 237, fontpage_97_225_237), // 'メ' -- 'ロ' + FONTDATA_ITEM(97, 242, 243, fontpage_97_242_243), // 'ヲ' -- 'ン' + FONTDATA_ITEM(97, 252, 252, fontpage_97_252_252), // 'ー' -- 'ー' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_ko_KR.h b/Marlin/src/lcd/dogm/fontdata/langdata_ko_KR.h index 6b48434a6f..31cc0bca36 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_ko_KR.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_ko_KR.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_344_240_240[34] U8G_FONT_SECTION("fontpage_344_240_240") = { 0x00,0x0B,0x0D,0x00,0xFD,0x00,0x00,0x00,0x00,0x00,0xF0,0xF0,0x00,0x09,0xFE,0x00, @@ -436,112 +438,111 @@ const u8g_fntpgm_uint8_t fontpage_431_136_136[34] U8G_FONT_SECTION("fontpage_431 0x00,0x08,0x0B,0x0B,0x0A,0x01,0xFE,0x71,0x01,0xFD,0x01,0x71,0x49,0x89,0x49,0x71, 0x01,0x01}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(344, 240, 240, fontpage_344_240_240), // '거' -- '거' - FONTDATA_ITEM(345, 224, 224, fontpage_345_224_224), // '고' -- '고' - FONTDATA_ITEM(347, 248, 248, fontpage_347_248_248), // '그' -- '그' - FONTDATA_ITEM(348, 137, 137, fontpage_348_137_137), // '급' -- '급' - FONTDATA_ITEM(348, 176, 176, fontpage_348_176_176), // '기' -- '기' - FONTDATA_ITEM(348, 197, 197, fontpage_348_197_197), // '깅' -- '깅' - FONTDATA_ITEM(352, 196, 196, fontpage_352_196_196), // '끄' -- '끄' - FONTDATA_ITEM(353, 180, 180, fontpage_353_180_180), // '내' -- '내' - FONTDATA_ITEM(354, 248, 248, fontpage_354_248_248), // '노' -- '노' - FONTDATA_ITEM(356, 132, 132, fontpage_356_132_132), // '누' -- '누' - FONTDATA_ITEM(356, 244, 244, fontpage_356_244_244), // '뉴' -- '뉴' - FONTDATA_ITEM(357, 200, 200, fontpage_357_200_200), // '니' -- '니' - FONTDATA_ITEM(357, 228, 228, fontpage_357_228_228), // '다' -- '다' - FONTDATA_ITEM(357, 249, 249, fontpage_357_249_249), // '당' -- '당' - FONTDATA_ITEM(359, 196, 196, fontpage_359_196_196), // '도' -- '도' - FONTDATA_ITEM(359, 204, 204, fontpage_359_204_204), // '돌' -- '돌' - FONTDATA_ITEM(359, 217, 217, fontpage_359_217_217), // '동' -- '동' - FONTDATA_ITEM(360, 152, 152, fontpage_360_152_152), // '되' -- '되' - FONTDATA_ITEM(360, 156, 156, fontpage_360_156_156), // '된' -- '된' - FONTDATA_ITEM(360, 168, 168, fontpage_360_168_168), // '됨' -- '됨' - FONTDATA_ITEM(361, 164, 164, fontpage_361_164_164), // '뒤' -- '뒤' - FONTDATA_ITEM(361, 220, 220, fontpage_361_220_220), // '드' -- '드' - FONTDATA_ITEM(362, 148, 148, fontpage_362_148_148), // '디' -- '디' - FONTDATA_ITEM(366, 252, 252, fontpage_366_252_252), // '라' -- '라' - FONTDATA_ITEM(367, 236, 236, fontpage_367_236_236), // '러' -- '러' - FONTDATA_ITEM(368, 136, 136, fontpage_368_136_136), // '레' -- '레' - FONTDATA_ITEM(368, 165, 165, fontpage_368_165_165), // '력' -- '력' - FONTDATA_ITEM(368, 220, 220, fontpage_368_220_220), // '로' -- '로' - FONTDATA_ITEM(369, 204, 204, fontpage_369_204_204), // '료' -- '료' - FONTDATA_ITEM(370, 244, 244, fontpage_370_244_244), // '르' -- '르' - FONTDATA_ITEM(371, 172, 172, fontpage_371_172_172), // '리' -- '리' - FONTDATA_ITEM(371, 176, 176, fontpage_371_176_176), // '린' -- '린' - FONTDATA_ITEM(371, 189, 189, fontpage_371_189_189), // '립' -- '립' - FONTDATA_ITEM(371, 193, 193, fontpage_371_193_193), // '링' -- '링' - FONTDATA_ITEM(372, 200, 200, fontpage_372_200_200), // '멈' -- '멈' - FONTDATA_ITEM(372, 212, 212, fontpage_372_212_212), // '메' -- '메' - FONTDATA_ITEM(372, 244, 244, fontpage_372_244_244), // '면' -- '면' - FONTDATA_ITEM(373, 168, 168, fontpage_373_168_168), // '모' -- '모' - FONTDATA_ITEM(373, 187, 187, fontpage_373_187_187), // '못' -- '못' - FONTDATA_ITEM(375, 248, 248, fontpage_375_248_248), // '미' -- '미' - FONTDATA_ITEM(376, 128, 128, fontpage_376_128_128), // '밀' -- '밀' - FONTDATA_ITEM(376, 148, 148, fontpage_376_148_148), // '바' -- '바' - FONTDATA_ITEM(377, 132, 132, fontpage_377_132_132), // '버' -- '버' - FONTDATA_ITEM(377, 160, 160, fontpage_377_160_160), // '베' -- '베' - FONTDATA_ITEM(377, 168, 168, fontpage_377_168_168), // '벨' -- '벨' - FONTDATA_ITEM(377, 248, 248, fontpage_377_248_248), // '본' -- '본' - FONTDATA_ITEM(380, 196, 196, fontpage_380_196_196), // '비' -- '비' - FONTDATA_ITEM(385, 172, 172, fontpage_385_172_172), // '사' -- '사' - FONTDATA_ITEM(385, 189, 189, fontpage_385_189_189), // '삽' -- '삽' - FONTDATA_ITEM(385, 200, 200, fontpage_385_200_200), // '새' -- '새' - FONTDATA_ITEM(386, 164, 164, fontpage_386_164_164), // '설' -- '설' - FONTDATA_ITEM(387, 140, 141, fontpage_387_140_141), // '소' -- '속' - FONTDATA_ITEM(389, 164, 164, fontpage_389_164_164), // '스' -- '스' - FONTDATA_ITEM(389, 172, 172, fontpage_389_172_172), // '슬' -- '슬' - FONTDATA_ITEM(389, 220, 221, fontpage_389_220_221), // '시' -- '식' - FONTDATA_ITEM(395, 180, 180, fontpage_395_180_180), // '어' -- '어' - FONTDATA_ITEM(395, 198, 198, fontpage_395_198_198), // '없' -- '없' - FONTDATA_ITEM(395, 209, 209, fontpage_395_209_209), // '엑' -- '엑' - FONTDATA_ITEM(395, 212, 212, fontpage_395_212_212), // '엔' -- '엔' - FONTDATA_ITEM(395, 244, 244, fontpage_395_244_244), // '열' -- '열' - FONTDATA_ITEM(396, 136, 136, fontpage_396_136_136), // '예' -- '예' - FONTDATA_ITEM(396, 164, 164, fontpage_396_164_164), // '오' -- '오' - FONTDATA_ITEM(396, 168, 168, fontpage_396_168_168), // '온' -- '온' - FONTDATA_ITEM(396, 196, 196, fontpage_396_196_196), // '완' -- '완' - FONTDATA_ITEM(397, 208, 208, fontpage_397_208_208), // '원' -- '원' - FONTDATA_ITEM(398, 132, 132, fontpage_398_132_132), // '위' -- '위' - FONTDATA_ITEM(398, 188, 188, fontpage_398_188_188), // '으' -- '으' - FONTDATA_ITEM(398, 204, 204, fontpage_398_204_204), // '음' -- '음' - FONTDATA_ITEM(398, 244, 244, fontpage_398_244_244), // '이' -- '이' - FONTDATA_ITEM(398, 252, 253, fontpage_398_252_253), // '일' -- '읽' - FONTDATA_ITEM(399, 133, 133, fontpage_399_133_133), // '입' -- '입' - FONTDATA_ITEM(399, 144, 145, fontpage_399_144_145), // '자' -- '작' - FONTDATA_ITEM(399, 152, 152, fontpage_399_152_152), // '잘' -- '잘' - FONTDATA_ITEM(399, 165, 165, fontpage_399_165_165), // '장' -- '장' - FONTDATA_ITEM(399, 172, 172, fontpage_399_172_172), // '재' -- '재' - FONTDATA_ITEM(400, 128, 128, fontpage_400_128_128), // '저' -- '저' - FONTDATA_ITEM(400, 132, 132, fontpage_400_132_132), // '전' -- '전' - FONTDATA_ITEM(400, 149, 149, fontpage_400_149_149), // '정' -- '정' - FONTDATA_ITEM(400, 156, 156, fontpage_400_156_156), // '제' -- '제' - FONTDATA_ITEM(401, 253, 253, fontpage_401_253_253), // '죽' -- '죽' - FONTDATA_ITEM(402, 128, 128, fontpage_402_128_128), // '준' -- '준' - FONTDATA_ITEM(402, 145, 145, fontpage_402_145_145), // '중' -- '중' - FONTDATA_ITEM(403, 144, 144, fontpage_403_144_144), // '즐' -- '즐' - FONTDATA_ITEM(403, 192, 192, fontpage_403_192_192), // '지' -- '지' - FONTDATA_ITEM(409, 152, 152, fontpage_409_152_152), // '처' -- '처' - FONTDATA_ITEM(410, 136, 136, fontpage_410_136_136), // '초' -- '초' - FONTDATA_ITEM(411, 149, 149, fontpage_411_149_149), // '축' -- '축' - FONTDATA_ITEM(411, 156, 156, fontpage_411_156_156), // '출' -- '출' - FONTDATA_ITEM(411, 164, 164, fontpage_411_164_164), // '춤' -- '춤' - FONTDATA_ITEM(411, 232, 232, fontpage_411_232_232), // '취' -- '취' - FONTDATA_ITEM(412, 216, 216, fontpage_412_216_216), // '치' -- '치' - FONTDATA_ITEM(412, 232, 232, fontpage_412_232_232), // '침' -- '침' - FONTDATA_ITEM(412, 244, 244, fontpage_412_244_244), // '카' -- '카' - FONTDATA_ITEM(414, 156, 156, fontpage_414_156_156), // '켜' -- '켜' - FONTDATA_ITEM(417, 209, 209, fontpage_417_209_209), // '탑' -- '탑' - FONTDATA_ITEM(418, 176, 176, fontpage_418_176_176), // '터' -- '터' - FONTDATA_ITEM(418, 204, 204, fontpage_418_204_204), // '테' -- '테' - FONTDATA_ITEM(419, 160, 160, fontpage_419_160_160), // '토' -- '토' - FONTDATA_ITEM(421, 184, 184, fontpage_421_184_184), // '트' -- '트' - FONTDATA_ITEM(423, 156, 156, fontpage_423_156_156), // '펜' -- '펜' - FONTDATA_ITEM(426, 132, 132, fontpage_426_132_132), // '프' -- '프' - FONTDATA_ITEM(426, 216, 216, fontpage_426_216_216), // '하' -- '하' - FONTDATA_ITEM(426, 233, 233, fontpage_426_233_233), // '합' -- '합' - FONTDATA_ITEM(428, 200, 200, fontpage_428_200_200), // '홈' -- '홈' - FONTDATA_ITEM(428, 212, 212, fontpage_428_212_212), // '화' -- '화' - FONTDATA_ITEM(431, 136, 136, fontpage_431_136_136), // '히' -- '히' +static const uxg_fontinfo_t g_fontinfo_ko_KR[] PROGMEM = { + FONTDATA_ITEM(344, 240, 240, fontpage_344_240_240), // '거' -- '거' + FONTDATA_ITEM(345, 224, 224, fontpage_345_224_224), // '고' -- '고' + FONTDATA_ITEM(347, 248, 248, fontpage_347_248_248), // '그' -- '그' + FONTDATA_ITEM(348, 137, 137, fontpage_348_137_137), // '급' -- '급' + FONTDATA_ITEM(348, 176, 176, fontpage_348_176_176), // '기' -- '기' + FONTDATA_ITEM(348, 197, 197, fontpage_348_197_197), // '깅' -- '깅' + FONTDATA_ITEM(352, 196, 196, fontpage_352_196_196), // '끄' -- '끄' + FONTDATA_ITEM(353, 180, 180, fontpage_353_180_180), // '내' -- '내' + FONTDATA_ITEM(354, 248, 248, fontpage_354_248_248), // '노' -- '노' + FONTDATA_ITEM(356, 132, 132, fontpage_356_132_132), // '누' -- '누' + FONTDATA_ITEM(356, 244, 244, fontpage_356_244_244), // '뉴' -- '뉴' + FONTDATA_ITEM(357, 200, 200, fontpage_357_200_200), // '니' -- '니' + FONTDATA_ITEM(357, 228, 228, fontpage_357_228_228), // '다' -- '다' + FONTDATA_ITEM(357, 249, 249, fontpage_357_249_249), // '당' -- '당' + FONTDATA_ITEM(359, 196, 196, fontpage_359_196_196), // '도' -- '도' + FONTDATA_ITEM(359, 204, 204, fontpage_359_204_204), // '돌' -- '돌' + FONTDATA_ITEM(359, 217, 217, fontpage_359_217_217), // '동' -- '동' + FONTDATA_ITEM(360, 152, 152, fontpage_360_152_152), // '되' -- '되' + FONTDATA_ITEM(360, 156, 156, fontpage_360_156_156), // '된' -- '된' + FONTDATA_ITEM(360, 168, 168, fontpage_360_168_168), // '됨' -- '됨' + FONTDATA_ITEM(361, 164, 164, fontpage_361_164_164), // '뒤' -- '뒤' + FONTDATA_ITEM(361, 220, 220, fontpage_361_220_220), // '드' -- '드' + FONTDATA_ITEM(362, 148, 148, fontpage_362_148_148), // '디' -- '디' + FONTDATA_ITEM(366, 252, 252, fontpage_366_252_252), // '라' -- '라' + FONTDATA_ITEM(367, 236, 236, fontpage_367_236_236), // '러' -- '러' + FONTDATA_ITEM(368, 136, 136, fontpage_368_136_136), // '레' -- '레' + FONTDATA_ITEM(368, 165, 165, fontpage_368_165_165), // '력' -- '력' + FONTDATA_ITEM(368, 220, 220, fontpage_368_220_220), // '로' -- '로' + FONTDATA_ITEM(369, 204, 204, fontpage_369_204_204), // '료' -- '료' + FONTDATA_ITEM(370, 244, 244, fontpage_370_244_244), // '르' -- '르' + FONTDATA_ITEM(371, 172, 172, fontpage_371_172_172), // '리' -- '리' + FONTDATA_ITEM(371, 176, 176, fontpage_371_176_176), // '린' -- '린' + FONTDATA_ITEM(371, 189, 189, fontpage_371_189_189), // '립' -- '립' + FONTDATA_ITEM(371, 193, 193, fontpage_371_193_193), // '링' -- '링' + FONTDATA_ITEM(372, 200, 200, fontpage_372_200_200), // '멈' -- '멈' + FONTDATA_ITEM(372, 212, 212, fontpage_372_212_212), // '메' -- '메' + FONTDATA_ITEM(372, 244, 244, fontpage_372_244_244), // '면' -- '면' + FONTDATA_ITEM(373, 168, 168, fontpage_373_168_168), // '모' -- '모' + FONTDATA_ITEM(373, 187, 187, fontpage_373_187_187), // '못' -- '못' + FONTDATA_ITEM(375, 248, 248, fontpage_375_248_248), // '미' -- '미' + FONTDATA_ITEM(376, 128, 128, fontpage_376_128_128), // '밀' -- '밀' + FONTDATA_ITEM(376, 148, 148, fontpage_376_148_148), // '바' -- '바' + FONTDATA_ITEM(377, 132, 132, fontpage_377_132_132), // '버' -- '버' + FONTDATA_ITEM(377, 160, 160, fontpage_377_160_160), // '베' -- '베' + FONTDATA_ITEM(377, 168, 168, fontpage_377_168_168), // '벨' -- '벨' + FONTDATA_ITEM(377, 248, 248, fontpage_377_248_248), // '본' -- '본' + FONTDATA_ITEM(380, 196, 196, fontpage_380_196_196), // '비' -- '비' + FONTDATA_ITEM(385, 172, 172, fontpage_385_172_172), // '사' -- '사' + FONTDATA_ITEM(385, 189, 189, fontpage_385_189_189), // '삽' -- '삽' + FONTDATA_ITEM(385, 200, 200, fontpage_385_200_200), // '새' -- '새' + FONTDATA_ITEM(386, 164, 164, fontpage_386_164_164), // '설' -- '설' + FONTDATA_ITEM(387, 140, 141, fontpage_387_140_141), // '소' -- '속' + FONTDATA_ITEM(389, 164, 164, fontpage_389_164_164), // '스' -- '스' + FONTDATA_ITEM(389, 172, 172, fontpage_389_172_172), // '슬' -- '슬' + FONTDATA_ITEM(389, 220, 221, fontpage_389_220_221), // '시' -- '식' + FONTDATA_ITEM(395, 180, 180, fontpage_395_180_180), // '어' -- '어' + FONTDATA_ITEM(395, 198, 198, fontpage_395_198_198), // '없' -- '없' + FONTDATA_ITEM(395, 209, 209, fontpage_395_209_209), // '엑' -- '엑' + FONTDATA_ITEM(395, 212, 212, fontpage_395_212_212), // '엔' -- '엔' + FONTDATA_ITEM(395, 244, 244, fontpage_395_244_244), // '열' -- '열' + FONTDATA_ITEM(396, 136, 136, fontpage_396_136_136), // '예' -- '예' + FONTDATA_ITEM(396, 164, 164, fontpage_396_164_164), // '오' -- '오' + FONTDATA_ITEM(396, 168, 168, fontpage_396_168_168), // '온' -- '온' + FONTDATA_ITEM(396, 196, 196, fontpage_396_196_196), // '완' -- '완' + FONTDATA_ITEM(397, 208, 208, fontpage_397_208_208), // '원' -- '원' + FONTDATA_ITEM(398, 132, 132, fontpage_398_132_132), // '위' -- '위' + FONTDATA_ITEM(398, 188, 188, fontpage_398_188_188), // '으' -- '으' + FONTDATA_ITEM(398, 204, 204, fontpage_398_204_204), // '음' -- '음' + FONTDATA_ITEM(398, 244, 244, fontpage_398_244_244), // '이' -- '이' + FONTDATA_ITEM(398, 252, 253, fontpage_398_252_253), // '일' -- '읽' + FONTDATA_ITEM(399, 133, 133, fontpage_399_133_133), // '입' -- '입' + FONTDATA_ITEM(399, 144, 145, fontpage_399_144_145), // '자' -- '작' + FONTDATA_ITEM(399, 152, 152, fontpage_399_152_152), // '잘' -- '잘' + FONTDATA_ITEM(399, 165, 165, fontpage_399_165_165), // '장' -- '장' + FONTDATA_ITEM(399, 172, 172, fontpage_399_172_172), // '재' -- '재' + FONTDATA_ITEM(400, 128, 128, fontpage_400_128_128), // '저' -- '저' + FONTDATA_ITEM(400, 132, 132, fontpage_400_132_132), // '전' -- '전' + FONTDATA_ITEM(400, 149, 149, fontpage_400_149_149), // '정' -- '정' + FONTDATA_ITEM(400, 156, 156, fontpage_400_156_156), // '제' -- '제' + FONTDATA_ITEM(401, 253, 253, fontpage_401_253_253), // '죽' -- '죽' + FONTDATA_ITEM(402, 128, 128, fontpage_402_128_128), // '준' -- '준' + FONTDATA_ITEM(402, 145, 145, fontpage_402_145_145), // '중' -- '중' + FONTDATA_ITEM(403, 144, 144, fontpage_403_144_144), // '즐' -- '즐' + FONTDATA_ITEM(403, 192, 192, fontpage_403_192_192), // '지' -- '지' + FONTDATA_ITEM(409, 152, 152, fontpage_409_152_152), // '처' -- '처' + FONTDATA_ITEM(410, 136, 136, fontpage_410_136_136), // '초' -- '초' + FONTDATA_ITEM(411, 149, 149, fontpage_411_149_149), // '축' -- '축' + FONTDATA_ITEM(411, 156, 156, fontpage_411_156_156), // '출' -- '출' + FONTDATA_ITEM(411, 164, 164, fontpage_411_164_164), // '춤' -- '춤' + FONTDATA_ITEM(411, 232, 232, fontpage_411_232_232), // '취' -- '취' + FONTDATA_ITEM(412, 216, 216, fontpage_412_216_216), // '치' -- '치' + FONTDATA_ITEM(412, 232, 232, fontpage_412_232_232), // '침' -- '침' + FONTDATA_ITEM(412, 244, 244, fontpage_412_244_244), // '카' -- '카' + FONTDATA_ITEM(414, 156, 156, fontpage_414_156_156), // '켜' -- '켜' + FONTDATA_ITEM(417, 209, 209, fontpage_417_209_209), // '탑' -- '탑' + FONTDATA_ITEM(418, 176, 176, fontpage_418_176_176), // '터' -- '터' + FONTDATA_ITEM(418, 204, 204, fontpage_418_204_204), // '테' -- '테' + FONTDATA_ITEM(419, 160, 160, fontpage_419_160_160), // '토' -- '토' + FONTDATA_ITEM(421, 184, 184, fontpage_421_184_184), // '트' -- '트' + FONTDATA_ITEM(423, 156, 156, fontpage_423_156_156), // '펜' -- '펜' + FONTDATA_ITEM(426, 132, 132, fontpage_426_132_132), // '프' -- '프' + FONTDATA_ITEM(426, 216, 216, fontpage_426_216_216), // '하' -- '하' + FONTDATA_ITEM(426, 233, 233, fontpage_426_233_233), // '합' -- '합' + FONTDATA_ITEM(428, 200, 200, fontpage_428_200_200), // '홈' -- '홈' + FONTDATA_ITEM(428, 212, 212, fontpage_428_212_212), // '화' -- '화' + FONTDATA_ITEM(431, 136, 136, fontpage_431_136_136), // '히' -- '히' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_nl.h b/Marlin/src/lcd/dogm/fontdata/langdata_nl.h index ffda82764f..e76eff3348 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_nl.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_nl.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_nl[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_pl.h b/Marlin/src/lcd/dogm/fontdata/langdata_pl.h index 926f075295..e89a6c159a 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_pl.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_pl.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_132_133[45] U8G_FONT_SECTION("fontpage_2_132_133") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x84,0x85,0x00,0x07,0xFE,0x00, @@ -29,12 +31,11 @@ const u8g_fntpgm_uint8_t fontpage_2_252_252[30] U8G_FONT_SECTION("fontpage_2_252 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xFC,0xFC,0x00,0x07,0x00,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x20,0x00,0xF8,0x10,0x20,0x40,0xF8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 132, 133, fontpage_2_132_133), // 'Ą' -- 'ą' - FONTDATA_ITEM(2, 135, 135, fontpage_2_135_135), // 'ć' -- 'ć' - FONTDATA_ITEM(2, 153, 153, fontpage_2_153_153), // 'ę' -- 'ę' - FONTDATA_ITEM(2, 193, 196, fontpage_2_193_196), // 'Ł' -- 'ń' - FONTDATA_ITEM(2, 218, 219, fontpage_2_218_219), // 'Ś' -- 'ś' - FONTDATA_ITEM(2, 252, 252, fontpage_2_252_252), // 'ż' -- 'ż' +static const uxg_fontinfo_t g_fontinfo_pl[] PROGMEM = { + FONTDATA_ITEM(2, 132, 133, fontpage_2_132_133), // 'Ą' -- 'ą' + FONTDATA_ITEM(2, 135, 135, fontpage_2_135_135), // 'ć' -- 'ć' + FONTDATA_ITEM(2, 153, 153, fontpage_2_153_153), // 'ę' -- 'ę' + FONTDATA_ITEM(2, 193, 196, fontpage_2_193_196), // 'Ł' -- 'ń' + FONTDATA_ITEM(2, 218, 219, fontpage_2_218_219), // 'Ś' -- 'ś' + FONTDATA_ITEM(2, 252, 252, fontpage_2_252_252), // 'ż' -- 'ż' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_pt.h b/Marlin/src/lcd/dogm/fontdata/langdata_pt.h index ffda82764f..61f857e587 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_pt.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_pt.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_pt[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_pt_br.h b/Marlin/src/lcd/dogm/fontdata/langdata_pt_br.h index ffda82764f..b0ed5ad5cf 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_pt_br.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_pt_br.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_pt_br[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_ro.h b/Marlin/src/lcd/dogm/fontdata/langdata_ro.h index ffda82764f..6be4863553 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_ro.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_ro.h @@ -3,7 +3,8 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {}; +#include "langdata.h" + +static const uxg_fontinfo_t g_fontinfo_ro[] PROGMEM = {}; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_ru.h b/Marlin/src/lcd/dogm/fontdata/langdata_ru.h index 4edd6e74e3..3f857a1b3f 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_ru.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_ru.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_8_144_168[348] U8G_FONT_SECTION("fontpage_8_144_168") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x90,0xA8,0x00,0x0A,0xFE,0x00, @@ -64,10 +66,9 @@ const u8g_fntpgm_uint8_t fontpage_8_209_209[30] U8G_FONT_SECTION("fontpage_8_209 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xD1,0xD1,0x00,0x07,0x00,0x00, 0x00,0x05,0x07,0x07,0x06,0x00,0x00,0x50,0x00,0x70,0x88,0xF0,0x80,0x70}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(8, 144, 168, fontpage_8_144_168), // 'А' -- 'Ш' - FONTDATA_ITEM(8, 171, 173, fontpage_8_171_173), // 'Ы' -- 'Э' - FONTDATA_ITEM(8, 175, 207, fontpage_8_175_207), // 'Я' -- 'я' - FONTDATA_ITEM(8, 209, 209, fontpage_8_209_209), // 'ё' -- 'ё' +static const uxg_fontinfo_t g_fontinfo_ru[] PROGMEM = { + FONTDATA_ITEM(8, 144, 168, fontpage_8_144_168), // 'А' -- 'Ш' + FONTDATA_ITEM(8, 171, 173, fontpage_8_171_173), // 'Ы' -- 'Э' + FONTDATA_ITEM(8, 175, 207, fontpage_8_175_207), // 'Я' -- 'я' + FONTDATA_ITEM(8, 209, 209, fontpage_8_209_209), // 'ё' -- 'ё' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_sk.h b/Marlin/src/lcd/dogm/fontdata/langdata_sk.h index 491006e05a..4580ce5b7b 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_sk.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_sk.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_140_143[79] U8G_FONT_SECTION("fontpage_2_140_143") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x8C,0x8F,0x00,0x0A,0x00,0x00, @@ -37,13 +39,12 @@ const u8g_fntpgm_uint8_t fontpage_2_253_254[47] U8G_FONT_SECTION("fontpage_2_253 0x00,0x05,0x0A,0x0A,0x06,0x00,0x00,0x50,0x20,0x00,0xF8,0x08,0x10,0x20,0x40,0x80, 0xF8,0x05,0x08,0x08,0x06,0x00,0x00,0x50,0x20,0x00,0xF8,0x10,0x20,0x40,0xF8}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 140, 143, fontpage_2_140_143), // 'Č' -- 'ď' - FONTDATA_ITEM(2, 186, 186, fontpage_2_186_186), // 'ĺ' -- 'ĺ' - FONTDATA_ITEM(2, 189, 190, fontpage_2_189_190), // 'Ľ' -- 'ľ' - FONTDATA_ITEM(2, 199, 200, fontpage_2_199_200), // 'Ň' -- 'ň' - FONTDATA_ITEM(2, 224, 225, fontpage_2_224_225), // 'Š' -- 'š' - FONTDATA_ITEM(2, 229, 229, fontpage_2_229_229), // 'ť' -- 'ť' - FONTDATA_ITEM(2, 253, 254, fontpage_2_253_254), // 'Ž' -- 'ž' +static const uxg_fontinfo_t g_fontinfo_sk[] PROGMEM = { + FONTDATA_ITEM(2, 140, 143, fontpage_2_140_143), // 'Č' -- 'ď' + FONTDATA_ITEM(2, 186, 186, fontpage_2_186_186), // 'ĺ' -- 'ĺ' + FONTDATA_ITEM(2, 189, 190, fontpage_2_189_190), // 'Ľ' -- 'ľ' + FONTDATA_ITEM(2, 199, 200, fontpage_2_199_200), // 'Ň' -- 'ň' + FONTDATA_ITEM(2, 224, 225, fontpage_2_224_225), // 'Š' -- 'š' + FONTDATA_ITEM(2, 229, 229, fontpage_2_229_229), // 'ť' -- 'ť' + FONTDATA_ITEM(2, 253, 254, fontpage_2_253_254), // 'Ž' -- 'ž' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_test.h b/Marlin/src/lcd/dogm/fontdata/langdata_test.h index c397d8b4b9..da76a31041 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_test.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_test.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_8_128_255[1677] U8G_FONT_SECTION("fontpage_8_128_255") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x80,0xFF,0x00,0x0A,0xFE,0x00, @@ -223,9 +225,8 @@ const u8g_fntpgm_uint8_t fontpage_97_193_255[822] U8G_FONT_SECTION("fontpage_97_ 0x06,0x00,0x02,0x28,0x28,0x00,0x80,0x60,0x10,0x08,0x05,0x06,0x06,0x06,0x00,0x00, 0xF8,0x08,0x08,0x08,0x08,0x08}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(8, 128, 255, fontpage_8_128_255), // 'Ѐ' -- 'ѿ' - FONTDATA_ITEM(97, 129, 191, fontpage_97_129_191), // 'め' -- 'タ' - FONTDATA_ITEM(97, 193, 255, fontpage_97_193_255), // 'チ' -- 'ヿ' +static const uxg_fontinfo_t g_fontinfo_test[] PROGMEM = { + FONTDATA_ITEM(8, 128, 255, fontpage_8_128_255), // 'Ѐ' -- 'ѿ' + FONTDATA_ITEM(97, 129, 191, fontpage_97_129_191), // 'め' -- 'タ' + FONTDATA_ITEM(97, 193, 255, fontpage_97_193_255), // 'チ' -- 'ヿ' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_tr.h b/Marlin/src/lcd/dogm/fontdata/langdata_tr.h index a4068e10d0..0ac02435a5 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_tr.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_tr.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_158_159[49] U8G_FONT_SECTION("fontpage_2_158_159") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x9E,0x9F,0x00,0x0A,0xFE,0x00, @@ -19,9 +21,8 @@ const u8g_fntpgm_uint8_t fontpage_2_222_223[45] U8G_FONT_SECTION("fontpage_2_222 0x00,0x05,0x09,0x09,0x06,0x00,0xFE,0x70,0x88,0x80,0x70,0x08,0x88,0x70,0x10,0x60, 0x05,0x07,0x07,0x06,0x00,0xFE,0x78,0x80,0x70,0x08,0xF0,0x10,0x60}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 158, 159, fontpage_2_158_159), // 'Ğ' -- 'ğ' - FONTDATA_ITEM(2, 176, 177, fontpage_2_176_177), // 'İ' -- 'ı' - FONTDATA_ITEM(2, 222, 223, fontpage_2_222_223), // 'Ş' -- 'ş' +static const uxg_fontinfo_t g_fontinfo_tr[] PROGMEM = { + FONTDATA_ITEM(2, 158, 159, fontpage_2_158_159), // 'Ğ' -- 'ğ' + FONTDATA_ITEM(2, 176, 177, fontpage_2_176_177), // 'İ' -- 'ı' + FONTDATA_ITEM(2, 222, 223, fontpage_2_222_223), // 'Ş' -- 'ş' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_uk.h b/Marlin/src/lcd/dogm/fontdata/langdata_uk.h index 47ec93992f..b25e2f6db4 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_uk.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_uk.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_8_134_134[30] U8G_FONT_SECTION("fontpage_8_134_134") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x86,0x86,0x00,0x07,0x00,0x00, @@ -72,14 +74,13 @@ const u8g_fntpgm_uint8_t fontpage_8_214_215[41] U8G_FONT_SECTION("fontpage_8_214 0x00,0x03,0x06,0x06,0x06,0x01,0x00,0x40,0x00,0xC0,0x40,0x40,0xE0,0x03,0x06,0x06, 0x06,0x01,0x00,0xA0,0x00,0xC0,0x40,0x40,0xE0}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(8, 134, 134, fontpage_8_134_134), // 'І' -- 'І' - FONTDATA_ITEM(8, 144, 169, fontpage_8_144_169), // 'А' -- 'Щ' - FONTDATA_ITEM(8, 172, 172, fontpage_8_172_172), // 'Ь' -- 'Ь' - FONTDATA_ITEM(8, 175, 201, fontpage_8_175_201), // 'Я' -- 'щ' - FONTDATA_ITEM(8, 204, 204, fontpage_8_204_204), // 'ь' -- 'ь' - FONTDATA_ITEM(8, 206, 207, fontpage_8_206_207), // 'ю' -- 'я' - FONTDATA_ITEM(8, 212, 212, fontpage_8_212_212), // 'є' -- 'є' - FONTDATA_ITEM(8, 214, 215, fontpage_8_214_215), // 'і' -- 'ї' +static const uxg_fontinfo_t g_fontinfo_uk[] PROGMEM = { + FONTDATA_ITEM(8, 134, 134, fontpage_8_134_134), // 'І' -- 'І' + FONTDATA_ITEM(8, 144, 169, fontpage_8_144_169), // 'А' -- 'Щ' + FONTDATA_ITEM(8, 172, 172, fontpage_8_172_172), // 'Ь' -- 'Ь' + FONTDATA_ITEM(8, 175, 201, fontpage_8_175_201), // 'Я' -- 'щ' + FONTDATA_ITEM(8, 204, 204, fontpage_8_204_204), // 'ь' -- 'ь' + FONTDATA_ITEM(8, 206, 207, fontpage_8_206_207), // 'ю' -- 'я' + FONTDATA_ITEM(8, 212, 212, fontpage_8_212_212), // 'є' -- 'є' + FONTDATA_ITEM(8, 214, 215, fontpage_8_214_215), // 'і' -- 'ї' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_vi.h b/Marlin/src/lcd/dogm/fontdata/langdata_vi.h index a8a0c5c121..303c4c66d6 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_vi.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_vi.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_2_131_131[31] U8G_FONT_SECTION("fontpage_2_131_131") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x83,0x83,0x00,0x08,0x00,0x00, @@ -177,51 +179,50 @@ const u8g_fntpgm_uint8_t fontpage_61_241_241[32] U8G_FONT_SECTION("fontpage_61_2 0x00,0x06,0x09,0x09,0x07,0x00,0xFE,0x0C,0x04,0x88,0x88,0x88,0x88,0x70,0x00,0x20 }; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(2, 131, 131, fontpage_2_131_131), // 'ă' -- 'ă' - FONTDATA_ITEM(2, 144, 145, fontpage_2_144_145), // 'Đ' -- 'đ' - FONTDATA_ITEM(2, 169, 169, fontpage_2_169_169), // 'ĩ' -- 'ĩ' - FONTDATA_ITEM(3, 161, 161, fontpage_3_161_161), // 'ơ' -- 'ơ' - FONTDATA_ITEM(3, 175, 176, fontpage_3_175_176), // 'Ư' -- 'ư' - FONTDATA_ITEM(6, 131, 131, fontpage_6_131_131), // '̃' -- '̃' - FONTDATA_ITEM(6, 137, 137, fontpage_6_137_137), // '̉' -- '̉' - FONTDATA_ITEM(6, 163, 163, fontpage_6_163_163), // '̣' -- '̣' - FONTDATA_ITEM(6, 192, 193, fontpage_6_192_193), // '̀' -- '́' - FONTDATA_ITEM(61, 161, 161, fontpage_61_161_161), // 'ạ' -- 'ạ' - FONTDATA_ITEM(61, 163, 163, fontpage_61_163_163), // 'ả' -- 'ả' - FONTDATA_ITEM(61, 165, 165, fontpage_61_165_165), // 'ấ' -- 'ấ' - FONTDATA_ITEM(61, 167, 167, fontpage_61_167_167), // 'ầ' -- 'ầ' - FONTDATA_ITEM(61, 169, 169, fontpage_61_169_169), // 'ẩ' -- 'ẩ' - FONTDATA_ITEM(61, 173, 173, fontpage_61_173_173), // 'ậ' -- 'ậ' - FONTDATA_ITEM(61, 175, 175, fontpage_61_175_175), // 'ắ' -- 'ắ' - FONTDATA_ITEM(61, 177, 177, fontpage_61_177_177), // 'ằ' -- 'ằ' - FONTDATA_ITEM(61, 179, 179, fontpage_61_179_179), // 'ẳ' -- 'ẳ' - FONTDATA_ITEM(61, 181, 181, fontpage_61_181_181), // 'ẵ' -- 'ẵ' - FONTDATA_ITEM(61, 183, 183, fontpage_61_183_183), // 'ặ' -- 'ặ' - FONTDATA_ITEM(61, 191, 191, fontpage_61_191_191), // 'ế' -- 'ế' - FONTDATA_ITEM(61, 193, 193, fontpage_61_193_193), // 'ề' -- 'ề' - FONTDATA_ITEM(61, 195, 195, fontpage_61_195_195), // 'ể' -- 'ể' - FONTDATA_ITEM(61, 199, 199, fontpage_61_199_199), // 'ệ' -- 'ệ' - FONTDATA_ITEM(61, 201, 201, fontpage_61_201_201), // 'ỉ' -- 'ỉ' - FONTDATA_ITEM(61, 203, 203, fontpage_61_203_203), // 'ị' -- 'ị' - FONTDATA_ITEM(61, 205, 205, fontpage_61_205_205), // 'ọ' -- 'ọ' - FONTDATA_ITEM(61, 207, 207, fontpage_61_207_207), // 'ỏ' -- 'ỏ' - FONTDATA_ITEM(61, 209, 209, fontpage_61_209_209), // 'ố' -- 'ố' - FONTDATA_ITEM(61, 211, 211, fontpage_61_211_211), // 'ồ' -- 'ồ' - FONTDATA_ITEM(61, 213, 213, fontpage_61_213_213), // 'ổ' -- 'ổ' - FONTDATA_ITEM(61, 215, 215, fontpage_61_215_215), // 'ỗ' -- 'ỗ' - FONTDATA_ITEM(61, 217, 217, fontpage_61_217_217), // 'ộ' -- 'ộ' - FONTDATA_ITEM(61, 219, 219, fontpage_61_219_219), // 'ớ' -- 'ớ' - FONTDATA_ITEM(61, 221, 221, fontpage_61_221_221), // 'ờ' -- 'ờ' - FONTDATA_ITEM(61, 223, 223, fontpage_61_223_223), // 'ở' -- 'ở' - FONTDATA_ITEM(61, 225, 225, fontpage_61_225_225), // 'ỡ' -- 'ỡ' - FONTDATA_ITEM(61, 227, 227, fontpage_61_227_227), // 'ợ' -- 'ợ' - FONTDATA_ITEM(61, 229, 229, fontpage_61_229_229), // 'ụ' -- 'ụ' - FONTDATA_ITEM(61, 231, 231, fontpage_61_231_231), // 'ủ' -- 'ủ' - FONTDATA_ITEM(61, 233, 233, fontpage_61_233_233), // 'ứ' -- 'ứ' - FONTDATA_ITEM(61, 235, 235, fontpage_61_235_235), // 'ừ' -- 'ừ' - FONTDATA_ITEM(61, 237, 237, fontpage_61_237_237), // 'ử' -- 'ử' - FONTDATA_ITEM(61, 239, 239, fontpage_61_239_239), // 'ữ' -- 'ữ' - FONTDATA_ITEM(61, 241, 241, fontpage_61_241_241), // 'ự' -- 'ự' +static const uxg_fontinfo_t g_fontinfo_vi[] PROGMEM = { + FONTDATA_ITEM(2, 131, 131, fontpage_2_131_131), // 'ă' -- 'ă' + FONTDATA_ITEM(2, 144, 145, fontpage_2_144_145), // 'Đ' -- 'đ' + FONTDATA_ITEM(2, 169, 169, fontpage_2_169_169), // 'ĩ' -- 'ĩ' + FONTDATA_ITEM(3, 161, 161, fontpage_3_161_161), // 'ơ' -- 'ơ' + FONTDATA_ITEM(3, 175, 176, fontpage_3_175_176), // 'Ư' -- 'ư' + FONTDATA_ITEM(6, 131, 131, fontpage_6_131_131), // '̃' -- '̃' + FONTDATA_ITEM(6, 137, 137, fontpage_6_137_137), // '̉' -- '̉' + FONTDATA_ITEM(6, 163, 163, fontpage_6_163_163), // '̣' -- '̣' + FONTDATA_ITEM(6, 192, 193, fontpage_6_192_193), // '̀' -- '́' + FONTDATA_ITEM(61, 161, 161, fontpage_61_161_161), // 'ạ' -- 'ạ' + FONTDATA_ITEM(61, 163, 163, fontpage_61_163_163), // 'ả' -- 'ả' + FONTDATA_ITEM(61, 165, 165, fontpage_61_165_165), // 'ấ' -- 'ấ' + FONTDATA_ITEM(61, 167, 167, fontpage_61_167_167), // 'ầ' -- 'ầ' + FONTDATA_ITEM(61, 169, 169, fontpage_61_169_169), // 'ẩ' -- 'ẩ' + FONTDATA_ITEM(61, 173, 173, fontpage_61_173_173), // 'ậ' -- 'ậ' + FONTDATA_ITEM(61, 175, 175, fontpage_61_175_175), // 'ắ' -- 'ắ' + FONTDATA_ITEM(61, 177, 177, fontpage_61_177_177), // 'ằ' -- 'ằ' + FONTDATA_ITEM(61, 179, 179, fontpage_61_179_179), // 'ẳ' -- 'ẳ' + FONTDATA_ITEM(61, 181, 181, fontpage_61_181_181), // 'ẵ' -- 'ẵ' + FONTDATA_ITEM(61, 183, 183, fontpage_61_183_183), // 'ặ' -- 'ặ' + FONTDATA_ITEM(61, 191, 191, fontpage_61_191_191), // 'ế' -- 'ế' + FONTDATA_ITEM(61, 193, 193, fontpage_61_193_193), // 'ề' -- 'ề' + FONTDATA_ITEM(61, 195, 195, fontpage_61_195_195), // 'ể' -- 'ể' + FONTDATA_ITEM(61, 199, 199, fontpage_61_199_199), // 'ệ' -- 'ệ' + FONTDATA_ITEM(61, 201, 201, fontpage_61_201_201), // 'ỉ' -- 'ỉ' + FONTDATA_ITEM(61, 203, 203, fontpage_61_203_203), // 'ị' -- 'ị' + FONTDATA_ITEM(61, 205, 205, fontpage_61_205_205), // 'ọ' -- 'ọ' + FONTDATA_ITEM(61, 207, 207, fontpage_61_207_207), // 'ỏ' -- 'ỏ' + FONTDATA_ITEM(61, 209, 209, fontpage_61_209_209), // 'ố' -- 'ố' + FONTDATA_ITEM(61, 211, 211, fontpage_61_211_211), // 'ồ' -- 'ồ' + FONTDATA_ITEM(61, 213, 213, fontpage_61_213_213), // 'ổ' -- 'ổ' + FONTDATA_ITEM(61, 215, 215, fontpage_61_215_215), // 'ỗ' -- 'ỗ' + FONTDATA_ITEM(61, 217, 217, fontpage_61_217_217), // 'ộ' -- 'ộ' + FONTDATA_ITEM(61, 219, 219, fontpage_61_219_219), // 'ớ' -- 'ớ' + FONTDATA_ITEM(61, 221, 221, fontpage_61_221_221), // 'ờ' -- 'ờ' + FONTDATA_ITEM(61, 223, 223, fontpage_61_223_223), // 'ở' -- 'ở' + FONTDATA_ITEM(61, 225, 225, fontpage_61_225_225), // 'ỡ' -- 'ỡ' + FONTDATA_ITEM(61, 227, 227, fontpage_61_227_227), // 'ợ' -- 'ợ' + FONTDATA_ITEM(61, 229, 229, fontpage_61_229_229), // 'ụ' -- 'ụ' + FONTDATA_ITEM(61, 231, 231, fontpage_61_231_231), // 'ủ' -- 'ủ' + FONTDATA_ITEM(61, 233, 233, fontpage_61_233_233), // 'ứ' -- 'ứ' + FONTDATA_ITEM(61, 235, 235, fontpage_61_235_235), // 'ừ' -- 'ừ' + FONTDATA_ITEM(61, 237, 237, fontpage_61_237_237), // 'ử' -- 'ử' + FONTDATA_ITEM(61, 239, 239, fontpage_61_239_239), // 'ữ' -- 'ữ' + FONTDATA_ITEM(61, 241, 241, fontpage_61_241_241), // 'ự' -- 'ự' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h b/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h index 491d480a01..664fa5f4bf 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_zh_CN.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_64_157_157[26] U8G_FONT_SECTION("fontpage_64_157_157") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x9D,0x9D,0x00,0x07,0x00,0x00, @@ -1462,362 +1464,361 @@ const u8g_fntpgm_uint8_t fontpage_510_154_154[30] U8G_FONT_SECTION("fontpage_510 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x9A,0x9A,0x00,0x08,0x00,0x00, 0x00,0x02,0x07,0x07,0x0C,0x06,0x01,0xC0,0xC0,0x00,0x00,0x00,0xC0,0xC0}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(64, 157, 157, fontpage_64_157_157), // '”' -- '”' - FONTDATA_ITEM(69, 191, 191, fontpage_69_191_191), // '⊿' -- '⊿' - FONTDATA_ITEM(156, 128, 128, fontpage_156_128_128), // '一' -- '一' - FONTDATA_ITEM(156, 137, 139, fontpage_156_137_139), // '三' -- '下' - FONTDATA_ITEM(156, 141, 141, fontpage_156_141_141), // '不' -- '不' - FONTDATA_ITEM(156, 147, 147, fontpage_156_147_147), // '专' -- '专' - FONTDATA_ITEM(156, 157, 157, fontpage_156_157_157), // '丝' -- '丝' - FONTDATA_ITEM(156, 170, 170, fontpage_156_170_170), // '个' -- '个' - FONTDATA_ITEM(156, 173, 173, fontpage_156_173_173), // '中' -- '中' - FONTDATA_ITEM(156, 186, 187, fontpage_156_186_187), // '为' -- '主' - FONTDATA_ITEM(156, 201, 201, fontpage_156_201_201), // '义' -- '义' - FONTDATA_ITEM(156, 203, 203, fontpage_156_203_203), // '之' -- '之' - FONTDATA_ITEM(157, 134, 134, fontpage_157_134_134), // '了' -- '了' - FONTDATA_ITEM(157, 140, 140, fontpage_157_140_140), // '二' -- '二' - FONTDATA_ITEM(157, 142, 142, fontpage_157_142_142), // '于' -- '于' - FONTDATA_ITEM(157, 164, 164, fontpage_157_164_164), // '交' -- '交' - FONTDATA_ITEM(157, 174, 174, fontpage_157_174_174), // '亮' -- '亮' - FONTDATA_ITEM(157, 206, 206, fontpage_157_206_206), // '从' -- '从' - FONTDATA_ITEM(157, 228, 229, fontpage_157_228_229), // '令' -- '以' - FONTDATA_ITEM(157, 246, 246, fontpage_157_246_246), // '件' -- '件' - FONTDATA_ITEM(157, 253, 253, fontpage_157_253_253), // '份' -- '份' - FONTDATA_ITEM(158, 145, 145, fontpage_158_145_145), // '休' -- '休' - FONTDATA_ITEM(158, 160, 160, fontpage_158_160_160), // '传' -- '传' - FONTDATA_ITEM(158, 205, 206, fontpage_158_205_206), // '位' -- '低' - FONTDATA_ITEM(158, 211, 211, fontpage_158_211_211), // '体' -- '体' - FONTDATA_ITEM(158, 217, 217, fontpage_158_217_217), // '余' -- '余' - FONTDATA_ITEM(158, 220, 220, fontpage_158_220_220), // '作' -- '作' - FONTDATA_ITEM(158, 255, 255, fontpage_158_255_255), // '使' -- '使' - FONTDATA_ITEM(159, 155, 155, fontpage_159_155_155), // '供' -- '供' - FONTDATA_ITEM(159, 181, 181, fontpage_159_181_181), // '侵' -- '侵' - FONTDATA_ITEM(159, 221, 221, fontpage_159_221_221), // '保' -- '保' - FONTDATA_ITEM(159, 225, 225, fontpage_159_225_225), // '信' -- '信' - FONTDATA_ITEM(160, 188, 188, fontpage_160_188_188), // '值' -- '值' - FONTDATA_ITEM(160, 190, 190, fontpage_160_190_190), // '倾' -- '倾' - FONTDATA_ITEM(160, 207, 207, fontpage_160_207_207), // '偏' -- '偏' - FONTDATA_ITEM(160, 220, 220, fontpage_160_220_220), // '停' -- '停' - FONTDATA_ITEM(161, 168, 168, fontpage_161_168_168), // '储' -- '储' - FONTDATA_ITEM(161, 207, 207, fontpage_161_207_207), // '像' -- '像' - FONTDATA_ITEM(162, 197, 197, fontpage_162_197_197), // '充' -- '充' - FONTDATA_ITEM(162, 200, 201, fontpage_162_200_201), // '先' -- '光' - FONTDATA_ITEM(162, 229, 229, fontpage_162_229_229), // '入' -- '入' - FONTDATA_ITEM(162, 232, 232, fontpage_162_232_232), // '全' -- '全' - FONTDATA_ITEM(162, 241, 241, fontpage_162_241_241), // '共' -- '共' - FONTDATA_ITEM(162, 243, 243, fontpage_162_243_243), // '关' -- '关' - FONTDATA_ITEM(162, 247, 247, fontpage_162_247_247), // '具' -- '具' - FONTDATA_ITEM(163, 151, 151, fontpage_163_151_151), // '冗' -- '冗' - FONTDATA_ITEM(163, 183, 183, fontpage_163_183_183), // '冷' -- '冷' - FONTDATA_ITEM(163, 198, 198, fontpage_163_198_198), // '准' -- '准' - FONTDATA_ITEM(163, 250, 251, fontpage_163_250_251), // '出' -- '击' - FONTDATA_ITEM(164, 134, 135, fontpage_164_134_135), // '分' -- '切' - FONTDATA_ITEM(164, 155, 155, fontpage_164_155_155), // '创' -- '创' - FONTDATA_ITEM(164, 157, 157, fontpage_164_157_157), // '初' -- '初' - FONTDATA_ITEM(164, 171, 171, fontpage_164_171_171), // '别' -- '别' - FONTDATA_ITEM(164, 176, 176, fontpage_164_176_176), // '到' -- '到' - FONTDATA_ITEM(164, 182, 183, fontpage_164_182_183), // '制' -- '刷' - FONTDATA_ITEM(164, 242, 242, fontpage_164_242_242), // '割' -- '割' - FONTDATA_ITEM(165, 155, 155, fontpage_165_155_155), // '力' -- '力' - FONTDATA_ITEM(165, 159, 160, fontpage_165_159_160), // '功' -- '加' - FONTDATA_ITEM(165, 168, 168, fontpage_165_168_168), // '动' -- '动' - FONTDATA_ITEM(166, 150, 150, fontpage_166_150_150), // '化' -- '化' - FONTDATA_ITEM(166, 199, 199, fontpage_166_199_199), // '升' -- '升' - FONTDATA_ITEM(166, 202, 202, fontpage_166_202_202), // '半' -- '半' - FONTDATA_ITEM(166, 207, 207, fontpage_166_207_207), // '协' -- '协' - FONTDATA_ITEM(166, 213, 213, fontpage_166_213_213), // '单' -- '单' - FONTDATA_ITEM(166, 225, 225, fontpage_166_225_225), // '卡' -- '卡' - FONTDATA_ITEM(166, 240, 241, fontpage_166_240_241), // '印' -- '危' - FONTDATA_ITEM(166, 244, 244, fontpage_166_244_244), // '却' -- '却' - FONTDATA_ITEM(166, 248, 248, fontpage_166_248_248), // '卸' -- '卸' - FONTDATA_ITEM(167, 139, 139, fontpage_167_139_139), // '压' -- '压' - FONTDATA_ITEM(167, 159, 159, fontpage_167_159_159), // '原' -- '原' - FONTDATA_ITEM(167, 204, 205, fontpage_167_204_205), // '双' -- '反' - FONTDATA_ITEM(167, 214, 214, fontpage_167_214_214), // '取' -- '取' - FONTDATA_ITEM(167, 216, 216, fontpage_167_216_216), // '变' -- '变' - FONTDATA_ITEM(167, 240, 240, fontpage_167_240_240), // '台' -- '台' - FONTDATA_ITEM(168, 131, 131, fontpage_168_131_131), // '吃' -- '吃' - FONTDATA_ITEM(168, 136, 136, fontpage_168_136_136), // '合' -- '合' - FONTDATA_ITEM(168, 141, 142, fontpage_168_141_142), // '名' -- '后' - FONTDATA_ITEM(168, 145, 145, fontpage_168_145_145), // '向' -- '向' - FONTDATA_ITEM(168, 166, 166, fontpage_168_166_166), // '否' -- '否' - FONTDATA_ITEM(168, 175, 175, fontpage_168_175_175), // '启' -- '启' - FONTDATA_ITEM(168, 202, 202, fontpage_168_202_202), // '告' -- '告' - FONTDATA_ITEM(168, 232, 232, fontpage_168_232_232), // '周' -- '周' - FONTDATA_ITEM(168, 253, 253, fontpage_168_253_253), // '命' -- '命' - FONTDATA_ITEM(169, 140, 140, fontpage_169_140_140), // '和' -- '和' - FONTDATA_ITEM(169, 205, 205, fontpage_169_205_205), // '响' -- '响' - FONTDATA_ITEM(171, 183, 183, fontpage_171_183_183), // '喷' -- '喷' - FONTDATA_ITEM(172, 180, 180, fontpage_172_180_180), // '嘴' -- '嘴' - FONTDATA_ITEM(172, 232, 232, fontpage_172_232_232), // '器' -- '器' - FONTDATA_ITEM(172, 244, 244, fontpage_172_244_244), // '噴' -- '噴' - FONTDATA_ITEM(173, 222, 222, fontpage_173_222_222), // '回' -- '回' - FONTDATA_ITEM(173, 224, 224, fontpage_173_224_224), // '因' -- '因' - FONTDATA_ITEM(173, 250, 250, fontpage_173_250_250), // '固' -- '固' - FONTDATA_ITEM(173, 254, 254, fontpage_173_254_254), // '图' -- '图' - FONTDATA_ITEM(174, 168, 168, fontpage_174_168_168), // '在' -- '在' - FONTDATA_ITEM(174, 207, 207, fontpage_174_207_207), // '坏' -- '坏' - FONTDATA_ITEM(174, 215, 215, fontpage_174_215_215), // '块' -- '块' - FONTDATA_ITEM(175, 139, 139, fontpage_175_139_139), // '型' -- '型' - FONTDATA_ITEM(175, 171, 171, fontpage_175_171_171), // '垫' -- '垫' - FONTDATA_ITEM(176, 235, 235, fontpage_176_235_235), // '填' -- '填' - FONTDATA_ITEM(177, 243, 243, fontpage_177_243_243), // '壳' -- '壳' - FONTDATA_ITEM(178, 135, 135, fontpage_178_135_135), // '备' -- '备' - FONTDATA_ITEM(178, 141, 141, fontpage_178_141_141), // '复' -- '复' - FONTDATA_ITEM(178, 150, 150, fontpage_178_150_150), // '外' -- '外' - FONTDATA_ITEM(178, 154, 154, fontpage_178_154_154), // '多' -- '多' - FONTDATA_ITEM(178, 167, 167, fontpage_178_167_167), // '大' -- '大' - FONTDATA_ITEM(178, 169, 170, fontpage_178_169_170), // '天' -- '太' - FONTDATA_ITEM(178, 177, 177, fontpage_178_177_177), // '失' -- '失' - FONTDATA_ITEM(178, 180, 180, fontpage_178_180_180), // '头' -- '头' - FONTDATA_ITEM(178, 253, 253, fontpage_178_253_253), // '好' -- '好' - FONTDATA_ITEM(179, 203, 203, fontpage_179_203_203), // '始' -- '始' - FONTDATA_ITEM(182, 208, 208, fontpage_182_208_208), // '子' -- '子' - FONTDATA_ITEM(182, 216, 216, fontpage_182_216_216), // '存' -- '存' - FONTDATA_ITEM(183, 137, 137, fontpage_183_137_137), // '安' -- '安' - FONTDATA_ITEM(183, 140, 140, fontpage_183_140_140), // '完' -- '完' - FONTDATA_ITEM(183, 154, 154, fontpage_183_154_154), // '定' -- '定' - FONTDATA_ITEM(183, 162, 162, fontpage_183_162_162), // '客' -- '客' - FONTDATA_ITEM(183, 171, 171, fontpage_183_171_171), // '宫' -- '宫' - FONTDATA_ITEM(183, 249, 249, fontpage_183_249_249), // '对' -- '对' - FONTDATA_ITEM(184, 134, 134, fontpage_184_134_134), // '将' -- '将' - FONTDATA_ITEM(184, 143, 143, fontpage_184_143_143), // '小' -- '小' - FONTDATA_ITEM(184, 177, 177, fontpage_184_177_177), // '就' -- '就' - FONTDATA_ITEM(184, 207, 207, fontpage_184_207_207), // '屏' -- '屏' - FONTDATA_ITEM(187, 229, 229, fontpage_187_229_229), // '工' -- '工' - FONTDATA_ITEM(187, 238, 238, fontpage_187_238_238), // '差' -- '差' - FONTDATA_ITEM(187, 242, 242, fontpage_187_242_242), // '已' -- '已' - FONTDATA_ITEM(188, 243, 243, fontpage_188_243_243), // '平' -- '平' - FONTDATA_ITEM(188, 246, 246, fontpage_188_246_246), // '并' -- '并' - FONTDATA_ITEM(189, 138, 138, fontpage_189_138_138), // '床' -- '床' - FONTDATA_ITEM(189, 148, 148, fontpage_189_148_148), // '应' -- '应' - FONTDATA_ITEM(189, 159, 159, fontpage_189_159_159), // '废' -- '废' - FONTDATA_ITEM(189, 166, 166, fontpage_189_166_166), // '度' -- '度' - FONTDATA_ITEM(190, 128, 128, fontpage_190_128_128), // '开' -- '开' - FONTDATA_ITEM(190, 131, 131, fontpage_190_131_131), // '弃' -- '弃' - FONTDATA_ITEM(190, 143, 143, fontpage_190_143_143), // '式' -- '式' - FONTDATA_ITEM(190, 149, 149, fontpage_190_149_149), // '引' -- '引' - FONTDATA_ITEM(190, 185, 185, fontpage_190_185_185), // '弹' -- '弹' - FONTDATA_ITEM(190, 210, 210, fontpage_190_210_210), // '归' -- '归' - FONTDATA_ITEM(191, 132, 133, fontpage_191_132_133), // '径' -- '待' - FONTDATA_ITEM(191, 170, 170, fontpage_191_170_170), // '循' -- '循' - FONTDATA_ITEM(191, 174, 174, fontpage_191_174_174), // '微' -- '微' - FONTDATA_ITEM(191, 195, 195, fontpage_191_195_195), // '心' -- '心' - FONTDATA_ITEM(191, 253, 253, fontpage_191_253_253), // '忽' -- '忽' - FONTDATA_ITEM(192, 167, 167, fontpage_192_167_167), // '性' -- '性' - FONTDATA_ITEM(192, 187, 187, fontpage_192_187_187), // '总' -- '总' - FONTDATA_ITEM(192, 226, 226, fontpage_192_226_226), // '恢' -- '恢' - FONTDATA_ITEM(192, 239, 239, fontpage_192_239_239), // '息' -- '息' - FONTDATA_ITEM(194, 159, 159, fontpage_194_159_159), // '感' -- '感' - FONTDATA_ITEM(196, 143, 144, fontpage_196_143_144), // '戏' -- '成' - FONTDATA_ITEM(196, 183, 183, fontpage_196_183_183), // '户' -- '户' - FONTDATA_ITEM(196, 192, 192, fontpage_196_192_192), // '所' -- '所' - FONTDATA_ITEM(196, 199, 199, fontpage_196_199_199), // '扇' -- '扇' - FONTDATA_ITEM(196, 203, 203, fontpage_196_203_203), // '手' -- '手' - FONTDATA_ITEM(196, 211, 211, fontpage_196_211_211), // '打' -- '打' - FONTDATA_ITEM(196, 231, 231, fontpage_196_231_231), // '执' -- '执' - FONTDATA_ITEM(196, 249, 249, fontpage_196_249_249), // '批' -- '批' - FONTDATA_ITEM(197, 150, 150, fontpage_197_150_150), // '抖' -- '抖' - FONTDATA_ITEM(197, 165, 165, fontpage_197_165_165), // '报' -- '报' - FONTDATA_ITEM(197, 172, 172, fontpage_197_172_172), // '抬' -- '抬' - FONTDATA_ITEM(197, 189, 189, fontpage_197_189_189), // '抽' -- '抽' - FONTDATA_ITEM(197, 212, 212, fontpage_197_212_212), // '拔' -- '拔' - FONTDATA_ITEM(197, 233, 233, fontpage_197_233_233), // '择' -- '择' - FONTDATA_ITEM(198, 137, 137, fontpage_198_137_137), // '按' -- '按' - FONTDATA_ITEM(198, 161, 161, fontpage_198_161_161), // '挡' -- '挡' - FONTDATA_ITEM(198, 164, 164, fontpage_198_164_164), // '挤' -- '挤' - FONTDATA_ITEM(198, 223, 223, fontpage_198_223_223), // '损' -- '损' - FONTDATA_ITEM(198, 226, 226, fontpage_198_226_226), // '换' -- '换' - FONTDATA_ITEM(199, 137, 137, fontpage_199_137_137), // '掉' -- '掉' - FONTDATA_ITEM(199, 162, 162, fontpage_199_162_162), // '探' -- '探' - FONTDATA_ITEM(199, 165, 165, fontpage_199_165_165), // '接' -- '接' - FONTDATA_ITEM(199, 167, 167, fontpage_199_167_167), // '控' -- '控' - FONTDATA_ITEM(199, 208, 208, fontpage_199_208_208), // '提' -- '提' - FONTDATA_ITEM(199, 210, 210, fontpage_199_210_210), // '插' -- '插' - FONTDATA_ITEM(202, 182, 182, fontpage_202_182_182), // '收' -- '收' - FONTDATA_ITEM(202, 190, 190, fontpage_202_190_190), // '放' -- '放' - FONTDATA_ITEM(202, 240, 240, fontpage_202_240_240), // '数' -- '数' - FONTDATA_ITEM(202, 242, 242, fontpage_202_242_242), // '敲' -- '敲' - FONTDATA_ITEM(202, 244, 244, fontpage_202_244_244), // '整' -- '整' - FONTDATA_ITEM(203, 135, 135, fontpage_203_135_135), // '文' -- '文' - FONTDATA_ITEM(203, 153, 153, fontpage_203_153_153), // '料' -- '料' - FONTDATA_ITEM(203, 156, 156, fontpage_203_156_156), // '斜' -- '斜' - FONTDATA_ITEM(203, 173, 173, fontpage_203_173_173), // '断' -- '断' - FONTDATA_ITEM(203, 176, 176, fontpage_203_176_176), // '新' -- '新' - FONTDATA_ITEM(203, 185, 185, fontpage_203_185_185), // '方' -- '方' - FONTDATA_ITEM(203, 224, 224, fontpage_203_224_224), // '无' -- '无' - FONTDATA_ITEM(203, 246, 246, fontpage_203_246_246), // '时' -- '时' - FONTDATA_ITEM(204, 142, 142, fontpage_204_142_142), // '明' -- '明' - FONTDATA_ITEM(204, 175, 175, fontpage_204_175_175), // '是' -- '是' - FONTDATA_ITEM(205, 130, 130, fontpage_205_130_130), // '暂' -- '暂' - FONTDATA_ITEM(205, 171, 171, fontpage_205_171_171), // '暫' -- '暫' - FONTDATA_ITEM(205, 244, 244, fontpage_205_244_244), // '更' -- '更' - FONTDATA_ITEM(206, 128, 128, fontpage_206_128_128), // '最' -- '最' - FONTDATA_ITEM(206, 137, 137, fontpage_206_137_137), // '有' -- '有' - FONTDATA_ITEM(206, 159, 159, fontpage_206_159_159), // '期' -- '期' - FONTDATA_ITEM(206, 186, 186, fontpage_206_186_186), // '机' -- '机' - FONTDATA_ITEM(206, 192, 192, fontpage_206_192_192), // '杀' -- '杀' - FONTDATA_ITEM(206, 223, 223, fontpage_206_223_223), // '束' -- '束' - FONTDATA_ITEM(206, 225, 225, fontpage_206_225_225), // '条' -- '条' - FONTDATA_ITEM(206, 229, 229, fontpage_206_229_229), // '来' -- '来' - FONTDATA_ITEM(206, 255, 255, fontpage_206_255_255), // '板' -- '板' - FONTDATA_ITEM(207, 151, 151, fontpage_207_151_151), // '林' -- '林' - FONTDATA_ITEM(207, 241, 241, fontpage_207_241_241), // '柱' -- '柱' - FONTDATA_ITEM(208, 161, 161, fontpage_208_161_161), // '校' -- '校' - FONTDATA_ITEM(208, 188, 188, fontpage_208_188_188), // '格' -- '格' - FONTDATA_ITEM(209, 175, 175, fontpage_209_175_175), // '梯' -- '梯' - FONTDATA_ITEM(209, 192, 192, fontpage_209_192_192), // '检' -- '检' - FONTDATA_ITEM(211, 253, 253, fontpage_211_253_253), // '槽' -- '槽' - FONTDATA_ITEM(212, 161, 161, fontpage_212_161_161), // '模' -- '模' - FONTDATA_ITEM(212, 217, 217, fontpage_212_217_217), // '橙' -- '橙' - FONTDATA_ITEM(214, 226, 227, fontpage_214_226_227), // '止' -- '正' - FONTDATA_ITEM(214, 229, 229, fontpage_214_229_229), // '步' -- '步' - FONTDATA_ITEM(215, 212, 212, fontpage_215_212_212), // '比' -- '比' - FONTDATA_ITEM(217, 161, 161, fontpage_217_161_161), // '没' -- '没' - FONTDATA_ITEM(217, 226, 226, fontpage_217_226_226), // '波' -- '波' - FONTDATA_ITEM(217, 232, 232, fontpage_217_232_232), // '注' -- '注' - FONTDATA_ITEM(218, 151, 151, fontpage_218_151_151), // '洗' -- '洗' - FONTDATA_ITEM(218, 187, 187, fontpage_218_187_187), // '活' -- '活' - FONTDATA_ITEM(218, 193, 193, fontpage_218_193_193), // '流' -- '流' - FONTDATA_ITEM(218, 203, 203, fontpage_218_203_203), // '测' -- '测' - FONTDATA_ITEM(219, 136, 136, fontpage_219_136_136), // '消' -- '消' - FONTDATA_ITEM(219, 225, 225, fontpage_219_225_225), // '淡' -- '淡' - FONTDATA_ITEM(219, 247, 247, fontpage_219_247_247), // '混' -- '混' - FONTDATA_ITEM(220, 133, 133, fontpage_220_133_133), // '清' -- '清' - FONTDATA_ITEM(220, 169, 169, fontpage_220_169_169), // '温' -- '温' - FONTDATA_ITEM(220, 184, 184, fontpage_220_184_184), // '游' -- '游' - FONTDATA_ITEM(221, 144, 144, fontpage_221_144_144), // '源' -- '源' - FONTDATA_ITEM(221, 162, 162, fontpage_221_162_162), // '溢' -- '溢' - FONTDATA_ITEM(221, 209, 209, fontpage_221_209_209), // '滑' -- '滑' - FONTDATA_ITEM(222, 143, 143, fontpage_222_143_143), // '漏' -- '漏' - FONTDATA_ITEM(223, 192, 192, fontpage_223_192_192), // '激' -- '激' - FONTDATA_ITEM(224, 239, 239, fontpage_224_239_239), // '灯' -- '灯' - FONTDATA_ITEM(225, 185, 185, fontpage_225_185_185), // '点' -- '点' - FONTDATA_ITEM(225, 237, 237, fontpage_225_237_237), // '热' -- '热' - FONTDATA_ITEM(228, 199, 199, fontpage_228_199_199), // '片' -- '片' - FONTDATA_ITEM(228, 233, 233, fontpage_228_233_233), // '物' -- '物' - FONTDATA_ITEM(228, 249, 249, fontpage_228_249_249), // '特' -- '特' - FONTDATA_ITEM(231, 135, 135, fontpage_231_135_135), // '率' -- '率' - FONTDATA_ITEM(231, 175, 175, fontpage_231_175_175), // '环' -- '环' - FONTDATA_ITEM(234, 168, 168, fontpage_234_168_168), // '用' -- '用' - FONTDATA_ITEM(234, 181, 181, fontpage_234_181_181), // '电' -- '电' - FONTDATA_ITEM(234, 229, 229, fontpage_234_229_229), // '略' -- '略' - FONTDATA_ITEM(236, 253, 253, fontpage_236_253_253), // '白' -- '白' - FONTDATA_ITEM(237, 132, 132, fontpage_237_132_132), // '的' -- '的' - FONTDATA_ITEM(237, 209, 209, fontpage_237_209_209), // '监' -- '监' - FONTDATA_ITEM(237, 244, 244, fontpage_237_244_244), // '直' -- '直' - FONTDATA_ITEM(238, 129, 129, fontpage_238_129_129), // '省' -- '省' - FONTDATA_ITEM(238, 160, 160, fontpage_238_160_160), // '眠' -- '眠' - FONTDATA_ITEM(240, 238, 238, fontpage_240_238_238), // '确' -- '确' - FONTDATA_ITEM(243, 187, 187, fontpage_243_187_187), // '离' -- '离' - FONTDATA_ITEM(243, 251, 251, fontpage_243_251_251), // '移' -- '移' - FONTDATA_ITEM(244, 250, 250, fontpage_244_250_250), // '空' -- '空' - FONTDATA_ITEM(245, 239, 239, fontpage_245_239_239), // '端' -- '端' - FONTDATA_ITEM(246, 172, 172, fontpage_246_172_172), // '第' -- '第' - FONTDATA_ITEM(246, 201, 201, fontpage_246_201_201), // '等' -- '等' - FONTDATA_ITEM(247, 128, 128, fontpage_247_128_128), // '简' -- '简' - FONTDATA_ITEM(247, 177, 177, fontpage_247_177_177), // '箱' -- '箱' - FONTDATA_ITEM(248, 251, 251, fontpage_248_251_251), // '类' -- '类' - FONTDATA_ITEM(250, 162, 162, fontpage_250_162_162), // '索' -- '索' - FONTDATA_ITEM(250, 171, 171, fontpage_250_171_171), // '紫' -- '紫' - FONTDATA_ITEM(253, 162, 162, fontpage_253_162_162), // '红' -- '红' - FONTDATA_ITEM(253, 167, 167, fontpage_253_167_167), // '级' -- '级' - FONTDATA_ITEM(253, 191, 191, fontpage_253_191_191), // '线' -- '线' - FONTDATA_ITEM(253, 198, 198, fontpage_253_198_198), // '细' -- '细' - FONTDATA_ITEM(253, 200, 200, fontpage_253_200_200), // '终' -- '终' - FONTDATA_ITEM(253, 211, 211, fontpage_253_211_211), // '结' -- '结' - FONTDATA_ITEM(253, 217, 217, fontpage_253_217_217), // '给' -- '给' - FONTDATA_ITEM(253, 223, 223, fontpage_253_223_223), // '统' -- '统' - FONTDATA_ITEM(253, 231, 231, fontpage_253_231_231), // '继' -- '继' - FONTDATA_ITEM(253, 234, 234, fontpage_253_234_234), // '绪' -- '绪' - FONTDATA_ITEM(253, 237, 237, fontpage_253_237_237), // '续' -- '续' - FONTDATA_ITEM(253, 255, 255, fontpage_253_255_255), // '绿' -- '绿' - FONTDATA_ITEM(254, 150, 150, fontpage_254_150_150), // '编' -- '编' - FONTDATA_ITEM(254, 186, 186, fontpage_254_186_186), // '缺' -- '缺' - FONTDATA_ITEM(254, 209, 209, fontpage_254_209_209), // '网' -- '网' - FONTDATA_ITEM(254, 238, 238, fontpage_254_238_238), // '置' -- '置' - FONTDATA_ITEM(254, 242, 242, fontpage_254_242_242), // '署' -- '署' - FONTDATA_ITEM(256, 133, 133, fontpage_256_133_133), // '者' -- '者' - FONTDATA_ITEM(256, 234, 234, fontpage_256_234_234), // '聪' -- '聪' - FONTDATA_ITEM(257, 253, 253, fontpage_257_253_253), // '能' -- '能' - FONTDATA_ITEM(259, 234, 234, fontpage_259_234_234), // '自' -- '自' - FONTDATA_ITEM(259, 243, 243, fontpage_259_243_243), // '至' -- '至' - FONTDATA_ITEM(263, 220, 220, fontpage_263_220_220), // '菜' -- '菜' - FONTDATA_ITEM(265, 221, 221, fontpage_265_221_221), // '蓝' -- '蓝' - FONTDATA_ITEM(269, 199, 199, fontpage_269_199_199), // '蛇' -- '蛇' - FONTDATA_ITEM(272, 204, 204, fontpage_272_204_204), // '行' -- '行' - FONTDATA_ITEM(273, 171, 171, fontpage_273_171_171), // '被' -- '被' - FONTDATA_ITEM(273, 197, 197, fontpage_273_197_197), // '装' -- '装' - FONTDATA_ITEM(275, 129, 129, fontpage_275_129_129), // '要' -- '要' - FONTDATA_ITEM(275, 210, 210, fontpage_275_210_210), // '角' -- '角' - FONTDATA_ITEM(279, 161, 161, fontpage_279_161_161), // '计' -- '计' - FONTDATA_ITEM(279, 174, 174, fontpage_279_174_174), // '议' -- '议' - FONTDATA_ITEM(279, 190, 190, fontpage_279_190_190), // '设' -- '设' - FONTDATA_ITEM(279, 213, 213, fontpage_279_213_213), // '试' -- '试' - FONTDATA_ITEM(279, 239, 239, fontpage_279_239_239), // '误' -- '误' - FONTDATA_ITEM(279, 247, 247, fontpage_279_247_247), // '请' -- '请' - FONTDATA_ITEM(279, 251, 251, fontpage_279_251_251), // '读' -- '读' - FONTDATA_ITEM(280, 131, 131, fontpage_280_131_131), // '调' -- '调' - FONTDATA_ITEM(282, 165, 165, fontpage_282_165_165), // '败' -- '败' - FONTDATA_ITEM(282, 170, 170, fontpage_282_170_170), // '贪' -- '贪' - FONTDATA_ITEM(282, 247, 247, fontpage_282_247_247), // '起' -- '起' - FONTDATA_ITEM(283, 133, 133, fontpage_283_133_133), // '超' -- '超' - FONTDATA_ITEM(283, 221, 221, fontpage_283_221_221), // '距' -- '距' - FONTDATA_ITEM(286, 236, 236, fontpage_286_236_236), // '转' -- '转' - FONTDATA_ITEM(286, 239, 239, fontpage_286_239_239), // '软' -- '软' - FONTDATA_ITEM(286, 244, 244, fontpage_286_244_244), // '轴' -- '轴' - FONTDATA_ITEM(286, 253, 253, fontpage_286_253_253), // '载' -- '载' - FONTDATA_ITEM(287, 145, 145, fontpage_287_145_145), // '辑' -- '辑' - FONTDATA_ITEM(287, 147, 147, fontpage_287_147_147), // '输' -- '输' - FONTDATA_ITEM(287, 185, 185, fontpage_287_185_185), // '边' -- '边' - FONTDATA_ITEM(287, 193, 193, fontpage_287_193_193), // '迁' -- '迁' - FONTDATA_ITEM(287, 208, 209, fontpage_287_208_209), // '运' -- '近' - FONTDATA_ITEM(287, 212, 212, fontpage_287_212_212), // '返' -- '返' - FONTDATA_ITEM(287, 216, 216, fontpage_287_216_216), // '还' -- '还' - FONTDATA_ITEM(287, 219, 219, fontpage_287_219_219), // '进' -- '进' - FONTDATA_ITEM(287, 222, 222, fontpage_287_222_222), // '连' -- '连' - FONTDATA_ITEM(287, 247, 247, fontpage_287_247_247), // '迷' -- '迷' - FONTDATA_ITEM(288, 128, 128, fontpage_288_128_128), // '退' -- '退' - FONTDATA_ITEM(288, 137, 137, fontpage_288_137_137), // '选' -- '选' - FONTDATA_ITEM(288, 159, 159, fontpage_288_159_159), // '速' -- '速' - FONTDATA_ITEM(289, 232, 232, fontpage_289_232_232), // '部' -- '部' - FONTDATA_ITEM(290, 205, 205, fontpage_290_205_205), // '配' -- '配' - FONTDATA_ITEM(291, 202, 202, fontpage_291_202_202), // '释' -- '释' - FONTDATA_ITEM(291, 205, 205, fontpage_291_205_205), // '重' -- '重' - FONTDATA_ITEM(291, 207, 207, fontpage_291_207_207), // '量' -- '量' - FONTDATA_ITEM(297, 136, 136, fontpage_297_136_136), // '针' -- '针' - FONTDATA_ITEM(297, 174, 174, fontpage_297_174_174), // '钮' -- '钮' - FONTDATA_ITEM(298, 153, 153, fontpage_298_153_153), // '错' -- '错' - FONTDATA_ITEM(298, 220, 220, fontpage_298_220_220), // '镜' -- '镜' - FONTDATA_ITEM(298, 255, 255, fontpage_298_255_255), // '长' -- '长' - FONTDATA_ITEM(299, 237, 237, fontpage_299_237_237), // '闭' -- '闭' - FONTDATA_ITEM(299, 242, 242, fontpage_299_242_242), // '闲' -- '闲' - FONTDATA_ITEM(299, 244, 244, fontpage_299_244_244), // '间' -- '间' - FONTDATA_ITEM(300, 136, 136, fontpage_300_136_136), // '阈' -- '阈' - FONTDATA_ITEM(300, 205, 205, fontpage_300_205_205), // '降' -- '降' - FONTDATA_ITEM(300, 208, 208, fontpage_300_208_208), // '限' -- '限' - FONTDATA_ITEM(300, 228, 228, fontpage_300_228_228), // '除' -- '除' - FONTDATA_ITEM(300, 233, 233, fontpage_300_233_233), // '险' -- '险' - FONTDATA_ITEM(301, 246, 246, fontpage_301_246_246), // '零' -- '零' - FONTDATA_ITEM(302, 128, 128, fontpage_302_128_128), // '需' -- '需' - FONTDATA_ITEM(302, 210, 210, fontpage_302_210_210), // '青' -- '青' - FONTDATA_ITEM(302, 222, 222, fontpage_302_222_222), // '非' -- '非' - FONTDATA_ITEM(302, 224, 224, fontpage_302_224_224), // '靠' -- '靠' - FONTDATA_ITEM(302, 226, 226, fontpage_302_226_226), // '面' -- '面' - FONTDATA_ITEM(304, 245, 245, fontpage_304_245_245), // '页' -- '页' - FONTDATA_ITEM(304, 249, 249, fontpage_304_249_249), // '项' -- '项' - FONTDATA_ITEM(305, 132, 132, fontpage_305_132_132), // '预' -- '预' - FONTDATA_ITEM(305, 145, 145, fontpage_305_145_145), // '频' -- '频' - FONTDATA_ITEM(305, 157, 157, fontpage_305_157_157), // '额' -- '额' - FONTDATA_ITEM(305, 206, 206, fontpage_305_206_206), // '风' -- '风' - FONTDATA_ITEM(306, 241, 241, fontpage_306_241_241), // '饱' -- '饱' - FONTDATA_ITEM(308, 236, 236, fontpage_308_236_236), // '马' -- '马' - FONTDATA_ITEM(308, 241, 241, fontpage_308_241_241), // '驱' -- '驱' - FONTDATA_ITEM(309, 216, 216, fontpage_309_216_216), // '高' -- '高' - FONTDATA_ITEM(317, 196, 196, fontpage_317_196_196), // '黄' -- '黄' - FONTDATA_ITEM(317, 222, 222, fontpage_317_222_222), // '點' -- '點' - FONTDATA_ITEM(318, 208, 208, fontpage_318_208_208), // '齐' -- '齐' - FONTDATA_ITEM(510, 154, 154, fontpage_510_154_154), // '：' -- '：' +static const uxg_fontinfo_t g_fontinfo_zh_CN[] PROGMEM = { + FONTDATA_ITEM(64, 157, 157, fontpage_64_157_157), // '”' -- '”' + FONTDATA_ITEM(69, 191, 191, fontpage_69_191_191), // '⊿' -- '⊿' + FONTDATA_ITEM(156, 128, 128, fontpage_156_128_128), // '一' -- '一' + FONTDATA_ITEM(156, 137, 139, fontpage_156_137_139), // '三' -- '下' + FONTDATA_ITEM(156, 141, 141, fontpage_156_141_141), // '不' -- '不' + FONTDATA_ITEM(156, 147, 147, fontpage_156_147_147), // '专' -- '专' + FONTDATA_ITEM(156, 157, 157, fontpage_156_157_157), // '丝' -- '丝' + FONTDATA_ITEM(156, 170, 170, fontpage_156_170_170), // '个' -- '个' + FONTDATA_ITEM(156, 173, 173, fontpage_156_173_173), // '中' -- '中' + FONTDATA_ITEM(156, 186, 187, fontpage_156_186_187), // '为' -- '主' + FONTDATA_ITEM(156, 201, 201, fontpage_156_201_201), // '义' -- '义' + FONTDATA_ITEM(156, 203, 203, fontpage_156_203_203), // '之' -- '之' + FONTDATA_ITEM(157, 134, 134, fontpage_157_134_134), // '了' -- '了' + FONTDATA_ITEM(157, 140, 140, fontpage_157_140_140), // '二' -- '二' + FONTDATA_ITEM(157, 142, 142, fontpage_157_142_142), // '于' -- '于' + FONTDATA_ITEM(157, 164, 164, fontpage_157_164_164), // '交' -- '交' + FONTDATA_ITEM(157, 174, 174, fontpage_157_174_174), // '亮' -- '亮' + FONTDATA_ITEM(157, 206, 206, fontpage_157_206_206), // '从' -- '从' + FONTDATA_ITEM(157, 228, 229, fontpage_157_228_229), // '令' -- '以' + FONTDATA_ITEM(157, 246, 246, fontpage_157_246_246), // '件' -- '件' + FONTDATA_ITEM(157, 253, 253, fontpage_157_253_253), // '份' -- '份' + FONTDATA_ITEM(158, 145, 145, fontpage_158_145_145), // '休' -- '休' + FONTDATA_ITEM(158, 160, 160, fontpage_158_160_160), // '传' -- '传' + FONTDATA_ITEM(158, 205, 206, fontpage_158_205_206), // '位' -- '低' + FONTDATA_ITEM(158, 211, 211, fontpage_158_211_211), // '体' -- '体' + FONTDATA_ITEM(158, 217, 217, fontpage_158_217_217), // '余' -- '余' + FONTDATA_ITEM(158, 220, 220, fontpage_158_220_220), // '作' -- '作' + FONTDATA_ITEM(158, 255, 255, fontpage_158_255_255), // '使' -- '使' + FONTDATA_ITEM(159, 155, 155, fontpage_159_155_155), // '供' -- '供' + FONTDATA_ITEM(159, 181, 181, fontpage_159_181_181), // '侵' -- '侵' + FONTDATA_ITEM(159, 221, 221, fontpage_159_221_221), // '保' -- '保' + FONTDATA_ITEM(159, 225, 225, fontpage_159_225_225), // '信' -- '信' + FONTDATA_ITEM(160, 188, 188, fontpage_160_188_188), // '值' -- '值' + FONTDATA_ITEM(160, 190, 190, fontpage_160_190_190), // '倾' -- '倾' + FONTDATA_ITEM(160, 207, 207, fontpage_160_207_207), // '偏' -- '偏' + FONTDATA_ITEM(160, 220, 220, fontpage_160_220_220), // '停' -- '停' + FONTDATA_ITEM(161, 168, 168, fontpage_161_168_168), // '储' -- '储' + FONTDATA_ITEM(161, 207, 207, fontpage_161_207_207), // '像' -- '像' + FONTDATA_ITEM(162, 197, 197, fontpage_162_197_197), // '充' -- '充' + FONTDATA_ITEM(162, 200, 201, fontpage_162_200_201), // '先' -- '光' + FONTDATA_ITEM(162, 229, 229, fontpage_162_229_229), // '入' -- '入' + FONTDATA_ITEM(162, 232, 232, fontpage_162_232_232), // '全' -- '全' + FONTDATA_ITEM(162, 241, 241, fontpage_162_241_241), // '共' -- '共' + FONTDATA_ITEM(162, 243, 243, fontpage_162_243_243), // '关' -- '关' + FONTDATA_ITEM(162, 247, 247, fontpage_162_247_247), // '具' -- '具' + FONTDATA_ITEM(163, 151, 151, fontpage_163_151_151), // '冗' -- '冗' + FONTDATA_ITEM(163, 183, 183, fontpage_163_183_183), // '冷' -- '冷' + FONTDATA_ITEM(163, 198, 198, fontpage_163_198_198), // '准' -- '准' + FONTDATA_ITEM(163, 250, 251, fontpage_163_250_251), // '出' -- '击' + FONTDATA_ITEM(164, 134, 135, fontpage_164_134_135), // '分' -- '切' + FONTDATA_ITEM(164, 155, 155, fontpage_164_155_155), // '创' -- '创' + FONTDATA_ITEM(164, 157, 157, fontpage_164_157_157), // '初' -- '初' + FONTDATA_ITEM(164, 171, 171, fontpage_164_171_171), // '别' -- '别' + FONTDATA_ITEM(164, 176, 176, fontpage_164_176_176), // '到' -- '到' + FONTDATA_ITEM(164, 182, 183, fontpage_164_182_183), // '制' -- '刷' + FONTDATA_ITEM(164, 242, 242, fontpage_164_242_242), // '割' -- '割' + FONTDATA_ITEM(165, 155, 155, fontpage_165_155_155), // '力' -- '力' + FONTDATA_ITEM(165, 159, 160, fontpage_165_159_160), // '功' -- '加' + FONTDATA_ITEM(165, 168, 168, fontpage_165_168_168), // '动' -- '动' + FONTDATA_ITEM(166, 150, 150, fontpage_166_150_150), // '化' -- '化' + FONTDATA_ITEM(166, 199, 199, fontpage_166_199_199), // '升' -- '升' + FONTDATA_ITEM(166, 202, 202, fontpage_166_202_202), // '半' -- '半' + FONTDATA_ITEM(166, 207, 207, fontpage_166_207_207), // '协' -- '协' + FONTDATA_ITEM(166, 213, 213, fontpage_166_213_213), // '单' -- '单' + FONTDATA_ITEM(166, 225, 225, fontpage_166_225_225), // '卡' -- '卡' + FONTDATA_ITEM(166, 240, 241, fontpage_166_240_241), // '印' -- '危' + FONTDATA_ITEM(166, 244, 244, fontpage_166_244_244), // '却' -- '却' + FONTDATA_ITEM(166, 248, 248, fontpage_166_248_248), // '卸' -- '卸' + FONTDATA_ITEM(167, 139, 139, fontpage_167_139_139), // '压' -- '压' + FONTDATA_ITEM(167, 159, 159, fontpage_167_159_159), // '原' -- '原' + FONTDATA_ITEM(167, 204, 205, fontpage_167_204_205), // '双' -- '反' + FONTDATA_ITEM(167, 214, 214, fontpage_167_214_214), // '取' -- '取' + FONTDATA_ITEM(167, 216, 216, fontpage_167_216_216), // '变' -- '变' + FONTDATA_ITEM(167, 240, 240, fontpage_167_240_240), // '台' -- '台' + FONTDATA_ITEM(168, 131, 131, fontpage_168_131_131), // '吃' -- '吃' + FONTDATA_ITEM(168, 136, 136, fontpage_168_136_136), // '合' -- '合' + FONTDATA_ITEM(168, 141, 142, fontpage_168_141_142), // '名' -- '后' + FONTDATA_ITEM(168, 145, 145, fontpage_168_145_145), // '向' -- '向' + FONTDATA_ITEM(168, 166, 166, fontpage_168_166_166), // '否' -- '否' + FONTDATA_ITEM(168, 175, 175, fontpage_168_175_175), // '启' -- '启' + FONTDATA_ITEM(168, 202, 202, fontpage_168_202_202), // '告' -- '告' + FONTDATA_ITEM(168, 232, 232, fontpage_168_232_232), // '周' -- '周' + FONTDATA_ITEM(168, 253, 253, fontpage_168_253_253), // '命' -- '命' + FONTDATA_ITEM(169, 140, 140, fontpage_169_140_140), // '和' -- '和' + FONTDATA_ITEM(169, 205, 205, fontpage_169_205_205), // '响' -- '响' + FONTDATA_ITEM(171, 183, 183, fontpage_171_183_183), // '喷' -- '喷' + FONTDATA_ITEM(172, 180, 180, fontpage_172_180_180), // '嘴' -- '嘴' + FONTDATA_ITEM(172, 232, 232, fontpage_172_232_232), // '器' -- '器' + FONTDATA_ITEM(172, 244, 244, fontpage_172_244_244), // '噴' -- '噴' + FONTDATA_ITEM(173, 222, 222, fontpage_173_222_222), // '回' -- '回' + FONTDATA_ITEM(173, 224, 224, fontpage_173_224_224), // '因' -- '因' + FONTDATA_ITEM(173, 250, 250, fontpage_173_250_250), // '固' -- '固' + FONTDATA_ITEM(173, 254, 254, fontpage_173_254_254), // '图' -- '图' + FONTDATA_ITEM(174, 168, 168, fontpage_174_168_168), // '在' -- '在' + FONTDATA_ITEM(174, 207, 207, fontpage_174_207_207), // '坏' -- '坏' + FONTDATA_ITEM(174, 215, 215, fontpage_174_215_215), // '块' -- '块' + FONTDATA_ITEM(175, 139, 139, fontpage_175_139_139), // '型' -- '型' + FONTDATA_ITEM(175, 171, 171, fontpage_175_171_171), // '垫' -- '垫' + FONTDATA_ITEM(176, 235, 235, fontpage_176_235_235), // '填' -- '填' + FONTDATA_ITEM(177, 243, 243, fontpage_177_243_243), // '壳' -- '壳' + FONTDATA_ITEM(178, 135, 135, fontpage_178_135_135), // '备' -- '备' + FONTDATA_ITEM(178, 141, 141, fontpage_178_141_141), // '复' -- '复' + FONTDATA_ITEM(178, 150, 150, fontpage_178_150_150), // '外' -- '外' + FONTDATA_ITEM(178, 154, 154, fontpage_178_154_154), // '多' -- '多' + FONTDATA_ITEM(178, 167, 167, fontpage_178_167_167), // '大' -- '大' + FONTDATA_ITEM(178, 169, 170, fontpage_178_169_170), // '天' -- '太' + FONTDATA_ITEM(178, 177, 177, fontpage_178_177_177), // '失' -- '失' + FONTDATA_ITEM(178, 180, 180, fontpage_178_180_180), // '头' -- '头' + FONTDATA_ITEM(178, 253, 253, fontpage_178_253_253), // '好' -- '好' + FONTDATA_ITEM(179, 203, 203, fontpage_179_203_203), // '始' -- '始' + FONTDATA_ITEM(182, 208, 208, fontpage_182_208_208), // '子' -- '子' + FONTDATA_ITEM(182, 216, 216, fontpage_182_216_216), // '存' -- '存' + FONTDATA_ITEM(183, 137, 137, fontpage_183_137_137), // '安' -- '安' + FONTDATA_ITEM(183, 140, 140, fontpage_183_140_140), // '完' -- '完' + FONTDATA_ITEM(183, 154, 154, fontpage_183_154_154), // '定' -- '定' + FONTDATA_ITEM(183, 162, 162, fontpage_183_162_162), // '客' -- '客' + FONTDATA_ITEM(183, 171, 171, fontpage_183_171_171), // '宫' -- '宫' + FONTDATA_ITEM(183, 249, 249, fontpage_183_249_249), // '对' -- '对' + FONTDATA_ITEM(184, 134, 134, fontpage_184_134_134), // '将' -- '将' + FONTDATA_ITEM(184, 143, 143, fontpage_184_143_143), // '小' -- '小' + FONTDATA_ITEM(184, 177, 177, fontpage_184_177_177), // '就' -- '就' + FONTDATA_ITEM(184, 207, 207, fontpage_184_207_207), // '屏' -- '屏' + FONTDATA_ITEM(187, 229, 229, fontpage_187_229_229), // '工' -- '工' + FONTDATA_ITEM(187, 238, 238, fontpage_187_238_238), // '差' -- '差' + FONTDATA_ITEM(187, 242, 242, fontpage_187_242_242), // '已' -- '已' + FONTDATA_ITEM(188, 243, 243, fontpage_188_243_243), // '平' -- '平' + FONTDATA_ITEM(188, 246, 246, fontpage_188_246_246), // '并' -- '并' + FONTDATA_ITEM(189, 138, 138, fontpage_189_138_138), // '床' -- '床' + FONTDATA_ITEM(189, 148, 148, fontpage_189_148_148), // '应' -- '应' + FONTDATA_ITEM(189, 159, 159, fontpage_189_159_159), // '废' -- '废' + FONTDATA_ITEM(189, 166, 166, fontpage_189_166_166), // '度' -- '度' + FONTDATA_ITEM(190, 128, 128, fontpage_190_128_128), // '开' -- '开' + FONTDATA_ITEM(190, 131, 131, fontpage_190_131_131), // '弃' -- '弃' + FONTDATA_ITEM(190, 143, 143, fontpage_190_143_143), // '式' -- '式' + FONTDATA_ITEM(190, 149, 149, fontpage_190_149_149), // '引' -- '引' + FONTDATA_ITEM(190, 185, 185, fontpage_190_185_185), // '弹' -- '弹' + FONTDATA_ITEM(190, 210, 210, fontpage_190_210_210), // '归' -- '归' + FONTDATA_ITEM(191, 132, 133, fontpage_191_132_133), // '径' -- '待' + FONTDATA_ITEM(191, 170, 170, fontpage_191_170_170), // '循' -- '循' + FONTDATA_ITEM(191, 174, 174, fontpage_191_174_174), // '微' -- '微' + FONTDATA_ITEM(191, 195, 195, fontpage_191_195_195), // '心' -- '心' + FONTDATA_ITEM(191, 253, 253, fontpage_191_253_253), // '忽' -- '忽' + FONTDATA_ITEM(192, 167, 167, fontpage_192_167_167), // '性' -- '性' + FONTDATA_ITEM(192, 187, 187, fontpage_192_187_187), // '总' -- '总' + FONTDATA_ITEM(192, 226, 226, fontpage_192_226_226), // '恢' -- '恢' + FONTDATA_ITEM(192, 239, 239, fontpage_192_239_239), // '息' -- '息' + FONTDATA_ITEM(194, 159, 159, fontpage_194_159_159), // '感' -- '感' + FONTDATA_ITEM(196, 143, 144, fontpage_196_143_144), // '戏' -- '成' + FONTDATA_ITEM(196, 183, 183, fontpage_196_183_183), // '户' -- '户' + FONTDATA_ITEM(196, 192, 192, fontpage_196_192_192), // '所' -- '所' + FONTDATA_ITEM(196, 199, 199, fontpage_196_199_199), // '扇' -- '扇' + FONTDATA_ITEM(196, 203, 203, fontpage_196_203_203), // '手' -- '手' + FONTDATA_ITEM(196, 211, 211, fontpage_196_211_211), // '打' -- '打' + FONTDATA_ITEM(196, 231, 231, fontpage_196_231_231), // '执' -- '执' + FONTDATA_ITEM(196, 249, 249, fontpage_196_249_249), // '批' -- '批' + FONTDATA_ITEM(197, 150, 150, fontpage_197_150_150), // '抖' -- '抖' + FONTDATA_ITEM(197, 165, 165, fontpage_197_165_165), // '报' -- '报' + FONTDATA_ITEM(197, 172, 172, fontpage_197_172_172), // '抬' -- '抬' + FONTDATA_ITEM(197, 189, 189, fontpage_197_189_189), // '抽' -- '抽' + FONTDATA_ITEM(197, 212, 212, fontpage_197_212_212), // '拔' -- '拔' + FONTDATA_ITEM(197, 233, 233, fontpage_197_233_233), // '择' -- '择' + FONTDATA_ITEM(198, 137, 137, fontpage_198_137_137), // '按' -- '按' + FONTDATA_ITEM(198, 161, 161, fontpage_198_161_161), // '挡' -- '挡' + FONTDATA_ITEM(198, 164, 164, fontpage_198_164_164), // '挤' -- '挤' + FONTDATA_ITEM(198, 223, 223, fontpage_198_223_223), // '损' -- '损' + FONTDATA_ITEM(198, 226, 226, fontpage_198_226_226), // '换' -- '换' + FONTDATA_ITEM(199, 137, 137, fontpage_199_137_137), // '掉' -- '掉' + FONTDATA_ITEM(199, 162, 162, fontpage_199_162_162), // '探' -- '探' + FONTDATA_ITEM(199, 165, 165, fontpage_199_165_165), // '接' -- '接' + FONTDATA_ITEM(199, 167, 167, fontpage_199_167_167), // '控' -- '控' + FONTDATA_ITEM(199, 208, 208, fontpage_199_208_208), // '提' -- '提' + FONTDATA_ITEM(199, 210, 210, fontpage_199_210_210), // '插' -- '插' + FONTDATA_ITEM(202, 182, 182, fontpage_202_182_182), // '收' -- '收' + FONTDATA_ITEM(202, 190, 190, fontpage_202_190_190), // '放' -- '放' + FONTDATA_ITEM(202, 240, 240, fontpage_202_240_240), // '数' -- '数' + FONTDATA_ITEM(202, 242, 242, fontpage_202_242_242), // '敲' -- '敲' + FONTDATA_ITEM(202, 244, 244, fontpage_202_244_244), // '整' -- '整' + FONTDATA_ITEM(203, 135, 135, fontpage_203_135_135), // '文' -- '文' + FONTDATA_ITEM(203, 153, 153, fontpage_203_153_153), // '料' -- '料' + FONTDATA_ITEM(203, 156, 156, fontpage_203_156_156), // '斜' -- '斜' + FONTDATA_ITEM(203, 173, 173, fontpage_203_173_173), // '断' -- '断' + FONTDATA_ITEM(203, 176, 176, fontpage_203_176_176), // '新' -- '新' + FONTDATA_ITEM(203, 185, 185, fontpage_203_185_185), // '方' -- '方' + FONTDATA_ITEM(203, 224, 224, fontpage_203_224_224), // '无' -- '无' + FONTDATA_ITEM(203, 246, 246, fontpage_203_246_246), // '时' -- '时' + FONTDATA_ITEM(204, 142, 142, fontpage_204_142_142), // '明' -- '明' + FONTDATA_ITEM(204, 175, 175, fontpage_204_175_175), // '是' -- '是' + FONTDATA_ITEM(205, 130, 130, fontpage_205_130_130), // '暂' -- '暂' + FONTDATA_ITEM(205, 171, 171, fontpage_205_171_171), // '暫' -- '暫' + FONTDATA_ITEM(205, 244, 244, fontpage_205_244_244), // '更' -- '更' + FONTDATA_ITEM(206, 128, 128, fontpage_206_128_128), // '最' -- '最' + FONTDATA_ITEM(206, 137, 137, fontpage_206_137_137), // '有' -- '有' + FONTDATA_ITEM(206, 159, 159, fontpage_206_159_159), // '期' -- '期' + FONTDATA_ITEM(206, 186, 186, fontpage_206_186_186), // '机' -- '机' + FONTDATA_ITEM(206, 192, 192, fontpage_206_192_192), // '杀' -- '杀' + FONTDATA_ITEM(206, 223, 223, fontpage_206_223_223), // '束' -- '束' + FONTDATA_ITEM(206, 225, 225, fontpage_206_225_225), // '条' -- '条' + FONTDATA_ITEM(206, 229, 229, fontpage_206_229_229), // '来' -- '来' + FONTDATA_ITEM(206, 255, 255, fontpage_206_255_255), // '板' -- '板' + FONTDATA_ITEM(207, 151, 151, fontpage_207_151_151), // '林' -- '林' + FONTDATA_ITEM(207, 241, 241, fontpage_207_241_241), // '柱' -- '柱' + FONTDATA_ITEM(208, 161, 161, fontpage_208_161_161), // '校' -- '校' + FONTDATA_ITEM(208, 188, 188, fontpage_208_188_188), // '格' -- '格' + FONTDATA_ITEM(209, 175, 175, fontpage_209_175_175), // '梯' -- '梯' + FONTDATA_ITEM(209, 192, 192, fontpage_209_192_192), // '检' -- '检' + FONTDATA_ITEM(211, 253, 253, fontpage_211_253_253), // '槽' -- '槽' + FONTDATA_ITEM(212, 161, 161, fontpage_212_161_161), // '模' -- '模' + FONTDATA_ITEM(212, 217, 217, fontpage_212_217_217), // '橙' -- '橙' + FONTDATA_ITEM(214, 226, 227, fontpage_214_226_227), // '止' -- '正' + FONTDATA_ITEM(214, 229, 229, fontpage_214_229_229), // '步' -- '步' + FONTDATA_ITEM(215, 212, 212, fontpage_215_212_212), // '比' -- '比' + FONTDATA_ITEM(217, 161, 161, fontpage_217_161_161), // '没' -- '没' + FONTDATA_ITEM(217, 226, 226, fontpage_217_226_226), // '波' -- '波' + FONTDATA_ITEM(217, 232, 232, fontpage_217_232_232), // '注' -- '注' + FONTDATA_ITEM(218, 151, 151, fontpage_218_151_151), // '洗' -- '洗' + FONTDATA_ITEM(218, 187, 187, fontpage_218_187_187), // '活' -- '活' + FONTDATA_ITEM(218, 193, 193, fontpage_218_193_193), // '流' -- '流' + FONTDATA_ITEM(218, 203, 203, fontpage_218_203_203), // '测' -- '测' + FONTDATA_ITEM(219, 136, 136, fontpage_219_136_136), // '消' -- '消' + FONTDATA_ITEM(219, 225, 225, fontpage_219_225_225), // '淡' -- '淡' + FONTDATA_ITEM(219, 247, 247, fontpage_219_247_247), // '混' -- '混' + FONTDATA_ITEM(220, 133, 133, fontpage_220_133_133), // '清' -- '清' + FONTDATA_ITEM(220, 169, 169, fontpage_220_169_169), // '温' -- '温' + FONTDATA_ITEM(220, 184, 184, fontpage_220_184_184), // '游' -- '游' + FONTDATA_ITEM(221, 144, 144, fontpage_221_144_144), // '源' -- '源' + FONTDATA_ITEM(221, 162, 162, fontpage_221_162_162), // '溢' -- '溢' + FONTDATA_ITEM(221, 209, 209, fontpage_221_209_209), // '滑' -- '滑' + FONTDATA_ITEM(222, 143, 143, fontpage_222_143_143), // '漏' -- '漏' + FONTDATA_ITEM(223, 192, 192, fontpage_223_192_192), // '激' -- '激' + FONTDATA_ITEM(224, 239, 239, fontpage_224_239_239), // '灯' -- '灯' + FONTDATA_ITEM(225, 185, 185, fontpage_225_185_185), // '点' -- '点' + FONTDATA_ITEM(225, 237, 237, fontpage_225_237_237), // '热' -- '热' + FONTDATA_ITEM(228, 199, 199, fontpage_228_199_199), // '片' -- '片' + FONTDATA_ITEM(228, 233, 233, fontpage_228_233_233), // '物' -- '物' + FONTDATA_ITEM(228, 249, 249, fontpage_228_249_249), // '特' -- '特' + FONTDATA_ITEM(231, 135, 135, fontpage_231_135_135), // '率' -- '率' + FONTDATA_ITEM(231, 175, 175, fontpage_231_175_175), // '环' -- '环' + FONTDATA_ITEM(234, 168, 168, fontpage_234_168_168), // '用' -- '用' + FONTDATA_ITEM(234, 181, 181, fontpage_234_181_181), // '电' -- '电' + FONTDATA_ITEM(234, 229, 229, fontpage_234_229_229), // '略' -- '略' + FONTDATA_ITEM(236, 253, 253, fontpage_236_253_253), // '白' -- '白' + FONTDATA_ITEM(237, 132, 132, fontpage_237_132_132), // '的' -- '的' + FONTDATA_ITEM(237, 209, 209, fontpage_237_209_209), // '监' -- '监' + FONTDATA_ITEM(237, 244, 244, fontpage_237_244_244), // '直' -- '直' + FONTDATA_ITEM(238, 129, 129, fontpage_238_129_129), // '省' -- '省' + FONTDATA_ITEM(238, 160, 160, fontpage_238_160_160), // '眠' -- '眠' + FONTDATA_ITEM(240, 238, 238, fontpage_240_238_238), // '确' -- '确' + FONTDATA_ITEM(243, 187, 187, fontpage_243_187_187), // '离' -- '离' + FONTDATA_ITEM(243, 251, 251, fontpage_243_251_251), // '移' -- '移' + FONTDATA_ITEM(244, 250, 250, fontpage_244_250_250), // '空' -- '空' + FONTDATA_ITEM(245, 239, 239, fontpage_245_239_239), // '端' -- '端' + FONTDATA_ITEM(246, 172, 172, fontpage_246_172_172), // '第' -- '第' + FONTDATA_ITEM(246, 201, 201, fontpage_246_201_201), // '等' -- '等' + FONTDATA_ITEM(247, 128, 128, fontpage_247_128_128), // '简' -- '简' + FONTDATA_ITEM(247, 177, 177, fontpage_247_177_177), // '箱' -- '箱' + FONTDATA_ITEM(248, 251, 251, fontpage_248_251_251), // '类' -- '类' + FONTDATA_ITEM(250, 162, 162, fontpage_250_162_162), // '索' -- '索' + FONTDATA_ITEM(250, 171, 171, fontpage_250_171_171), // '紫' -- '紫' + FONTDATA_ITEM(253, 162, 162, fontpage_253_162_162), // '红' -- '红' + FONTDATA_ITEM(253, 167, 167, fontpage_253_167_167), // '级' -- '级' + FONTDATA_ITEM(253, 191, 191, fontpage_253_191_191), // '线' -- '线' + FONTDATA_ITEM(253, 198, 198, fontpage_253_198_198), // '细' -- '细' + FONTDATA_ITEM(253, 200, 200, fontpage_253_200_200), // '终' -- '终' + FONTDATA_ITEM(253, 211, 211, fontpage_253_211_211), // '结' -- '结' + FONTDATA_ITEM(253, 217, 217, fontpage_253_217_217), // '给' -- '给' + FONTDATA_ITEM(253, 223, 223, fontpage_253_223_223), // '统' -- '统' + FONTDATA_ITEM(253, 231, 231, fontpage_253_231_231), // '继' -- '继' + FONTDATA_ITEM(253, 234, 234, fontpage_253_234_234), // '绪' -- '绪' + FONTDATA_ITEM(253, 237, 237, fontpage_253_237_237), // '续' -- '续' + FONTDATA_ITEM(253, 255, 255, fontpage_253_255_255), // '绿' -- '绿' + FONTDATA_ITEM(254, 150, 150, fontpage_254_150_150), // '编' -- '编' + FONTDATA_ITEM(254, 186, 186, fontpage_254_186_186), // '缺' -- '缺' + FONTDATA_ITEM(254, 209, 209, fontpage_254_209_209), // '网' -- '网' + FONTDATA_ITEM(254, 238, 238, fontpage_254_238_238), // '置' -- '置' + FONTDATA_ITEM(254, 242, 242, fontpage_254_242_242), // '署' -- '署' + FONTDATA_ITEM(256, 133, 133, fontpage_256_133_133), // '者' -- '者' + FONTDATA_ITEM(256, 234, 234, fontpage_256_234_234), // '聪' -- '聪' + FONTDATA_ITEM(257, 253, 253, fontpage_257_253_253), // '能' -- '能' + FONTDATA_ITEM(259, 234, 234, fontpage_259_234_234), // '自' -- '自' + FONTDATA_ITEM(259, 243, 243, fontpage_259_243_243), // '至' -- '至' + FONTDATA_ITEM(263, 220, 220, fontpage_263_220_220), // '菜' -- '菜' + FONTDATA_ITEM(265, 221, 221, fontpage_265_221_221), // '蓝' -- '蓝' + FONTDATA_ITEM(269, 199, 199, fontpage_269_199_199), // '蛇' -- '蛇' + FONTDATA_ITEM(272, 204, 204, fontpage_272_204_204), // '行' -- '行' + FONTDATA_ITEM(273, 171, 171, fontpage_273_171_171), // '被' -- '被' + FONTDATA_ITEM(273, 197, 197, fontpage_273_197_197), // '装' -- '装' + FONTDATA_ITEM(275, 129, 129, fontpage_275_129_129), // '要' -- '要' + FONTDATA_ITEM(275, 210, 210, fontpage_275_210_210), // '角' -- '角' + FONTDATA_ITEM(279, 161, 161, fontpage_279_161_161), // '计' -- '计' + FONTDATA_ITEM(279, 174, 174, fontpage_279_174_174), // '议' -- '议' + FONTDATA_ITEM(279, 190, 190, fontpage_279_190_190), // '设' -- '设' + FONTDATA_ITEM(279, 213, 213, fontpage_279_213_213), // '试' -- '试' + FONTDATA_ITEM(279, 239, 239, fontpage_279_239_239), // '误' -- '误' + FONTDATA_ITEM(279, 247, 247, fontpage_279_247_247), // '请' -- '请' + FONTDATA_ITEM(279, 251, 251, fontpage_279_251_251), // '读' -- '读' + FONTDATA_ITEM(280, 131, 131, fontpage_280_131_131), // '调' -- '调' + FONTDATA_ITEM(282, 165, 165, fontpage_282_165_165), // '败' -- '败' + FONTDATA_ITEM(282, 170, 170, fontpage_282_170_170), // '贪' -- '贪' + FONTDATA_ITEM(282, 247, 247, fontpage_282_247_247), // '起' -- '起' + FONTDATA_ITEM(283, 133, 133, fontpage_283_133_133), // '超' -- '超' + FONTDATA_ITEM(283, 221, 221, fontpage_283_221_221), // '距' -- '距' + FONTDATA_ITEM(286, 236, 236, fontpage_286_236_236), // '转' -- '转' + FONTDATA_ITEM(286, 239, 239, fontpage_286_239_239), // '软' -- '软' + FONTDATA_ITEM(286, 244, 244, fontpage_286_244_244), // '轴' -- '轴' + FONTDATA_ITEM(286, 253, 253, fontpage_286_253_253), // '载' -- '载' + FONTDATA_ITEM(287, 145, 145, fontpage_287_145_145), // '辑' -- '辑' + FONTDATA_ITEM(287, 147, 147, fontpage_287_147_147), // '输' -- '输' + FONTDATA_ITEM(287, 185, 185, fontpage_287_185_185), // '边' -- '边' + FONTDATA_ITEM(287, 193, 193, fontpage_287_193_193), // '迁' -- '迁' + FONTDATA_ITEM(287, 208, 209, fontpage_287_208_209), // '运' -- '近' + FONTDATA_ITEM(287, 212, 212, fontpage_287_212_212), // '返' -- '返' + FONTDATA_ITEM(287, 216, 216, fontpage_287_216_216), // '还' -- '还' + FONTDATA_ITEM(287, 219, 219, fontpage_287_219_219), // '进' -- '进' + FONTDATA_ITEM(287, 222, 222, fontpage_287_222_222), // '连' -- '连' + FONTDATA_ITEM(287, 247, 247, fontpage_287_247_247), // '迷' -- '迷' + FONTDATA_ITEM(288, 128, 128, fontpage_288_128_128), // '退' -- '退' + FONTDATA_ITEM(288, 137, 137, fontpage_288_137_137), // '选' -- '选' + FONTDATA_ITEM(288, 159, 159, fontpage_288_159_159), // '速' -- '速' + FONTDATA_ITEM(289, 232, 232, fontpage_289_232_232), // '部' -- '部' + FONTDATA_ITEM(290, 205, 205, fontpage_290_205_205), // '配' -- '配' + FONTDATA_ITEM(291, 202, 202, fontpage_291_202_202), // '释' -- '释' + FONTDATA_ITEM(291, 205, 205, fontpage_291_205_205), // '重' -- '重' + FONTDATA_ITEM(291, 207, 207, fontpage_291_207_207), // '量' -- '量' + FONTDATA_ITEM(297, 136, 136, fontpage_297_136_136), // '针' -- '针' + FONTDATA_ITEM(297, 174, 174, fontpage_297_174_174), // '钮' -- '钮' + FONTDATA_ITEM(298, 153, 153, fontpage_298_153_153), // '错' -- '错' + FONTDATA_ITEM(298, 220, 220, fontpage_298_220_220), // '镜' -- '镜' + FONTDATA_ITEM(298, 255, 255, fontpage_298_255_255), // '长' -- '长' + FONTDATA_ITEM(299, 237, 237, fontpage_299_237_237), // '闭' -- '闭' + FONTDATA_ITEM(299, 242, 242, fontpage_299_242_242), // '闲' -- '闲' + FONTDATA_ITEM(299, 244, 244, fontpage_299_244_244), // '间' -- '间' + FONTDATA_ITEM(300, 136, 136, fontpage_300_136_136), // '阈' -- '阈' + FONTDATA_ITEM(300, 205, 205, fontpage_300_205_205), // '降' -- '降' + FONTDATA_ITEM(300, 208, 208, fontpage_300_208_208), // '限' -- '限' + FONTDATA_ITEM(300, 228, 228, fontpage_300_228_228), // '除' -- '除' + FONTDATA_ITEM(300, 233, 233, fontpage_300_233_233), // '险' -- '险' + FONTDATA_ITEM(301, 246, 246, fontpage_301_246_246), // '零' -- '零' + FONTDATA_ITEM(302, 128, 128, fontpage_302_128_128), // '需' -- '需' + FONTDATA_ITEM(302, 210, 210, fontpage_302_210_210), // '青' -- '青' + FONTDATA_ITEM(302, 222, 222, fontpage_302_222_222), // '非' -- '非' + FONTDATA_ITEM(302, 224, 224, fontpage_302_224_224), // '靠' -- '靠' + FONTDATA_ITEM(302, 226, 226, fontpage_302_226_226), // '面' -- '面' + FONTDATA_ITEM(304, 245, 245, fontpage_304_245_245), // '页' -- '页' + FONTDATA_ITEM(304, 249, 249, fontpage_304_249_249), // '项' -- '项' + FONTDATA_ITEM(305, 132, 132, fontpage_305_132_132), // '预' -- '预' + FONTDATA_ITEM(305, 145, 145, fontpage_305_145_145), // '频' -- '频' + FONTDATA_ITEM(305, 157, 157, fontpage_305_157_157), // '额' -- '额' + FONTDATA_ITEM(305, 206, 206, fontpage_305_206_206), // '风' -- '风' + FONTDATA_ITEM(306, 241, 241, fontpage_306_241_241), // '饱' -- '饱' + FONTDATA_ITEM(308, 236, 236, fontpage_308_236_236), // '马' -- '马' + FONTDATA_ITEM(308, 241, 241, fontpage_308_241_241), // '驱' -- '驱' + FONTDATA_ITEM(309, 216, 216, fontpage_309_216_216), // '高' -- '高' + FONTDATA_ITEM(317, 196, 196, fontpage_317_196_196), // '黄' -- '黄' + FONTDATA_ITEM(317, 222, 222, fontpage_317_222_222), // '點' -- '點' + FONTDATA_ITEM(318, 208, 208, fontpage_318_208_208), // '齐' -- '齐' + FONTDATA_ITEM(510, 154, 154, fontpage_510_154_154), // '：' -- '：' }; diff --git a/Marlin/src/lcd/dogm/fontdata/langdata_zh_TW.h b/Marlin/src/lcd/dogm/fontdata/langdata_zh_TW.h index 8eee544ec8..093629cd16 100644 --- a/Marlin/src/lcd/dogm/fontdata/langdata_zh_TW.h +++ b/Marlin/src/lcd/dogm/fontdata/langdata_zh_TW.h @@ -3,7 +3,9 @@ * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#pragma once + +#include "langdata.h" const u8g_fntpgm_uint8_t fontpage_69_191_191[28] U8G_FONT_SECTION("fontpage_69_191_191") = { 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0xBF,0xBF,0x00,0x05,0x00,0x00, @@ -1217,305 +1219,304 @@ const u8g_fntpgm_uint8_t fontpage_510_154_154[30] U8G_FONT_SECTION("fontpage_510 0x00,0x0C,0x0F,0x00,0xFE,0x00,0x00,0x00,0x00,0x00,0x9A,0x9A,0x00,0x08,0x00,0x00, 0x00,0x02,0x07,0x07,0x0C,0x06,0x01,0xC0,0xC0,0x00,0x00,0x00,0xC0,0xC0}; -#define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } -static const uxg_fontinfo_t g_fontinfo[] PROGMEM = { - FONTDATA_ITEM(69, 191, 191, fontpage_69_191_191), // '⊿' -- '⊿' - FONTDATA_ITEM(156, 128, 128, fontpage_156_128_128), // '一' -- '一' - FONTDATA_ITEM(156, 137, 139, fontpage_156_137_139), // '三' -- '下' - FONTDATA_ITEM(156, 141, 141, fontpage_156_141_141), // '不' -- '不' - FONTDATA_ITEM(156, 166, 166, fontpage_156_166_166), // '並' -- '並' - FONTDATA_ITEM(156, 173, 173, fontpage_156_173_173), // '中' -- '中' - FONTDATA_ITEM(156, 187, 187, fontpage_156_187_187), // '主' -- '主' - FONTDATA_ITEM(156, 203, 203, fontpage_156_203_203), // '之' -- '之' - FONTDATA_ITEM(157, 164, 164, fontpage_157_164_164), // '交' -- '交' - FONTDATA_ITEM(157, 174, 174, fontpage_157_174_174), // '亮' -- '亮' - FONTDATA_ITEM(157, 228, 228, fontpage_157_228_228), // '令' -- '令' - FONTDATA_ITEM(157, 246, 246, fontpage_157_246_246), // '件' -- '件' - FONTDATA_ITEM(157, 253, 253, fontpage_157_253_253), // '份' -- '份' - FONTDATA_ITEM(158, 145, 145, fontpage_158_145_145), // '休' -- '休' - FONTDATA_ITEM(158, 205, 206, fontpage_158_205_206), // '位' -- '低' - FONTDATA_ITEM(158, 220, 220, fontpage_158_220_220), // '作' -- '作' - FONTDATA_ITEM(159, 155, 155, fontpage_159_155_155), // '供' -- '供' - FONTDATA_ITEM(159, 221, 221, fontpage_159_221_221), // '保' -- '保' - FONTDATA_ITEM(159, 225, 225, fontpage_159_225_225), // '信' -- '信' - FONTDATA_ITEM(160, 139, 139, fontpage_160_139_139), // '個' -- '個' - FONTDATA_ITEM(160, 188, 188, fontpage_160_188_188), // '值' -- '值' - FONTDATA_ITEM(160, 207, 207, fontpage_160_207_207), // '偏' -- '偏' - FONTDATA_ITEM(160, 220, 220, fontpage_160_220_220), // '停' -- '停' - FONTDATA_ITEM(160, 245, 245, fontpage_160_245_245), // '偵' -- '偵' - FONTDATA_ITEM(161, 153, 153, fontpage_161_153_153), // '備' -- '備' - FONTDATA_ITEM(161, 179, 179, fontpage_161_179_179), // '傳' -- '傳' - FONTDATA_ITEM(161, 190, 190, fontpage_161_190_190), // '傾' -- '傾' - FONTDATA_ITEM(162, 178, 178, fontpage_162_178_178), // '儲' -- '儲' - FONTDATA_ITEM(162, 197, 197, fontpage_162_197_197), // '充' -- '充' - FONTDATA_ITEM(162, 200, 201, fontpage_162_200_201), // '先' -- '光' - FONTDATA_ITEM(162, 229, 229, fontpage_162_229_229), // '入' -- '入' - FONTDATA_ITEM(162, 232, 232, fontpage_162_232_232), // '全' -- '全' - FONTDATA_ITEM(162, 241, 241, fontpage_162_241_241), // '共' -- '共' - FONTDATA_ITEM(162, 247, 247, fontpage_162_247_247), // '具' -- '具' - FONTDATA_ITEM(163, 151, 151, fontpage_163_151_151), // '冗' -- '冗' - FONTDATA_ITEM(163, 183, 183, fontpage_163_183_183), // '冷' -- '冷' - FONTDATA_ITEM(163, 198, 198, fontpage_163_198_198), // '准' -- '准' - FONTDATA_ITEM(163, 250, 250, fontpage_163_250_250), // '出' -- '出' - FONTDATA_ITEM(164, 134, 134, fontpage_164_134_134), // '分' -- '分' - FONTDATA_ITEM(164, 151, 151, fontpage_164_151_151), // '列' -- '列' - FONTDATA_ITEM(164, 157, 157, fontpage_164_157_157), // '初' -- '初' - FONTDATA_ITEM(164, 176, 176, fontpage_164_176_176), // '到' -- '到' - FONTDATA_ITEM(164, 182, 183, fontpage_164_182_183), // '制' -- '刷' - FONTDATA_ITEM(164, 245, 245, fontpage_164_245_245), // '創' -- '創' - FONTDATA_ITEM(165, 155, 155, fontpage_165_155_155), // '力' -- '力' - FONTDATA_ITEM(165, 160, 160, fontpage_165_160_160), // '加' -- '加' - FONTDATA_ITEM(165, 213, 213, fontpage_165_213_213), // '動' -- '動' - FONTDATA_ITEM(166, 150, 150, fontpage_166_150_150), // '化' -- '化' - FONTDATA_ITEM(166, 202, 202, fontpage_166_202_202), // '半' -- '半' - FONTDATA_ITEM(166, 212, 212, fontpage_166_212_212), // '協' -- '協' - FONTDATA_ITEM(166, 225, 225, fontpage_166_225_225), // '卡' -- '卡' - FONTDATA_ITEM(166, 240, 240, fontpage_166_240_240), // '印' -- '印' - FONTDATA_ITEM(166, 248, 248, fontpage_166_248_248), // '卸' -- '卸' - FONTDATA_ITEM(166, 251, 251, fontpage_166_251_251), // '卻' -- '卻' - FONTDATA_ITEM(167, 159, 159, fontpage_167_159_159), // '原' -- '原' - FONTDATA_ITEM(167, 205, 205, fontpage_167_205_205), // '反' -- '反' - FONTDATA_ITEM(167, 214, 214, fontpage_167_214_214), // '取' -- '取' - FONTDATA_ITEM(167, 240, 240, fontpage_167_240_240), // '台' -- '台' - FONTDATA_ITEM(168, 136, 136, fontpage_168_136_136), // '合' -- '合' - FONTDATA_ITEM(168, 166, 166, fontpage_168_166_166), // '否' -- '否' - FONTDATA_ITEM(168, 202, 202, fontpage_168_202_202), // '告' -- '告' - FONTDATA_ITEM(168, 253, 253, fontpage_168_253_253), // '命' -- '命' - FONTDATA_ITEM(169, 140, 140, fontpage_169_140_140), // '和' -- '和' - FONTDATA_ITEM(170, 223, 223, fontpage_170_223_223), // '啟' -- '啟' - FONTDATA_ITEM(171, 174, 174, fontpage_171_174_174), // '單' -- '單' - FONTDATA_ITEM(172, 180, 180, fontpage_172_180_180), // '嘴' -- '嘴' - FONTDATA_ITEM(172, 232, 232, fontpage_172_232_232), // '器' -- '器' - FONTDATA_ITEM(172, 244, 244, fontpage_172_244_244), // '噴' -- '噴' - FONTDATA_ITEM(173, 222, 222, fontpage_173_222_222), // '回' -- '回' - FONTDATA_ITEM(173, 224, 224, fontpage_173_224_224), // '因' -- '因' - FONTDATA_ITEM(173, 250, 250, fontpage_173_250_250), // '固' -- '固' - FONTDATA_ITEM(174, 150, 150, fontpage_174_150_150), // '圖' -- '圖' - FONTDATA_ITEM(174, 168, 168, fontpage_174_168_168), // '在' -- '在' - FONTDATA_ITEM(175, 139, 139, fontpage_175_139_139), // '型' -- '型' - FONTDATA_ITEM(175, 247, 247, fontpage_175_247_247), // '執' -- '執' - FONTDATA_ITEM(176, 202, 202, fontpage_176_202_202), // '塊' -- '塊' - FONTDATA_ITEM(176, 235, 235, fontpage_176_235_235), // '填' -- '填' - FONTDATA_ITEM(177, 138, 138, fontpage_177_138_138), // '墊' -- '墊' - FONTDATA_ITEM(178, 150, 150, fontpage_178_150_150), // '外' -- '外' - FONTDATA_ITEM(178, 154, 154, fontpage_178_154_154), // '多' -- '多' - FONTDATA_ITEM(178, 160, 160, fontpage_178_160_160), // '夠' -- '夠' - FONTDATA_ITEM(178, 167, 167, fontpage_178_167_167), // '大' -- '大' - FONTDATA_ITEM(178, 169, 170, fontpage_178_169_170), // '天' -- '太' - FONTDATA_ITEM(178, 177, 177, fontpage_178_177_177), // '失' -- '失' - FONTDATA_ITEM(179, 203, 203, fontpage_179_203_203), // '始' -- '始' - FONTDATA_ITEM(181, 146, 146, fontpage_181_146_146), // '媒' -- '媒' - FONTDATA_ITEM(182, 208, 208, fontpage_182_208_208), // '子' -- '子' - FONTDATA_ITEM(182, 216, 216, fontpage_182_216_216), // '存' -- '存' - FONTDATA_ITEM(183, 137, 137, fontpage_183_137_137), // '安' -- '安' - FONTDATA_ITEM(183, 140, 140, fontpage_183_140_140), // '完' -- '完' - FONTDATA_ITEM(183, 154, 154, fontpage_183_154_154), // '定' -- '定' - FONTDATA_ITEM(183, 162, 162, fontpage_183_162_162), // '客' -- '客' - FONTDATA_ITEM(183, 185, 185, fontpage_183_185_185), // '容' -- '容' - FONTDATA_ITEM(184, 141, 141, fontpage_184_141_141), // '對' -- '對' - FONTDATA_ITEM(184, 143, 143, fontpage_184_143_143), // '小' -- '小' - FONTDATA_ITEM(184, 177, 177, fontpage_184_177_177), // '就' -- '就' - FONTDATA_ITEM(187, 229, 229, fontpage_187_229_229), // '工' -- '工' - FONTDATA_ITEM(187, 238, 238, fontpage_187_238_238), // '差' -- '差' - FONTDATA_ITEM(187, 242, 242, fontpage_187_242_242), // '已' -- '已' - FONTDATA_ITEM(188, 243, 243, fontpage_188_243_243), // '平' -- '平' - FONTDATA_ITEM(189, 138, 138, fontpage_189_138_138), // '床' -- '床' - FONTDATA_ITEM(189, 166, 166, fontpage_189_166_166), // '度' -- '度' - FONTDATA_ITEM(189, 226, 226, fontpage_189_226_226), // '廢' -- '廢' - FONTDATA_ITEM(189, 250, 250, fontpage_189_250_250), // '建' -- '建' - FONTDATA_ITEM(190, 149, 149, fontpage_190_149_149), // '引' -- '引' - FONTDATA_ITEM(191, 133, 133, fontpage_191_133_133), // '待' -- '待' - FONTDATA_ITEM(191, 140, 140, fontpage_191_140_140), // '後' -- '後' - FONTDATA_ITEM(191, 145, 145, fontpage_191_145_145), // '徑' -- '徑' - FONTDATA_ITEM(191, 158, 158, fontpage_191_158_158), // '從' -- '從' - FONTDATA_ITEM(191, 169, 169, fontpage_191_169_169), // '復' -- '復' - FONTDATA_ITEM(191, 174, 174, fontpage_191_174_174), // '微' -- '微' - FONTDATA_ITEM(191, 195, 195, fontpage_191_195_195), // '心' -- '心' - FONTDATA_ITEM(192, 167, 167, fontpage_192_167_167), // '性' -- '性' - FONTDATA_ITEM(192, 226, 226, fontpage_192_226_226), // '恢' -- '恢' - FONTDATA_ITEM(192, 239, 239, fontpage_192_239_239), // '息' -- '息' - FONTDATA_ITEM(195, 182, 182, fontpage_195_182_182), // '憶' -- '憶' - FONTDATA_ITEM(195, 201, 201, fontpage_195_201_201), // '應' -- '應' - FONTDATA_ITEM(196, 144, 144, fontpage_196_144_144), // '成' -- '成' - FONTDATA_ITEM(196, 182, 182, fontpage_196_182_182), // '戶' -- '戶' - FONTDATA_ITEM(196, 192, 192, fontpage_196_192_192), // '所' -- '所' - FONTDATA_ITEM(196, 199, 199, fontpage_196_199_199), // '扇' -- '扇' - FONTDATA_ITEM(196, 203, 203, fontpage_196_203_203), // '手' -- '手' - FONTDATA_ITEM(196, 211, 211, fontpage_196_211_211), // '打' -- '打' - FONTDATA_ITEM(196, 249, 249, fontpage_196_249_249), // '批' -- '批' - FONTDATA_ITEM(197, 150, 150, fontpage_197_150_150), // '抖' -- '抖' - FONTDATA_ITEM(197, 189, 189, fontpage_197_189_189), // '抽' -- '抽' - FONTDATA_ITEM(197, 212, 212, fontpage_197_212_212), // '拔' -- '拔' - FONTDATA_ITEM(198, 137, 137, fontpage_198_137_137), // '按' -- '按' - FONTDATA_ITEM(199, 137, 137, fontpage_199_137_137), // '掉' -- '掉' - FONTDATA_ITEM(199, 162, 162, fontpage_199_162_162), // '探' -- '探' - FONTDATA_ITEM(199, 165, 165, fontpage_199_165_165), // '接' -- '接' - FONTDATA_ITEM(199, 167, 167, fontpage_199_167_167), // '控' -- '控' - FONTDATA_ITEM(199, 208, 208, fontpage_199_208_208), // '提' -- '提' - FONTDATA_ITEM(199, 210, 210, fontpage_199_210_210), // '插' -- '插' - FONTDATA_ITEM(199, 219, 219, fontpage_199_219_219), // '換' -- '換' - FONTDATA_ITEM(201, 199, 199, fontpage_201_199_199), // '擇' -- '擇' - FONTDATA_ITEM(201, 202, 203, fontpage_201_202_203), // '擊' -- '擋' - FONTDATA_ITEM(201, 224, 224, fontpage_201_224_224), // '擠' -- '擠' - FONTDATA_ITEM(202, 182, 182, fontpage_202_182_182), // '收' -- '收' - FONTDATA_ITEM(202, 190, 190, fontpage_202_190_190), // '放' -- '放' - FONTDATA_ITEM(202, 215, 215, fontpage_202_215_215), // '敗' -- '敗' - FONTDATA_ITEM(202, 244, 244, fontpage_202_244_244), // '整' -- '整' - FONTDATA_ITEM(202, 248, 248, fontpage_202_248_248), // '數' -- '數' - FONTDATA_ITEM(203, 153, 153, fontpage_203_153_153), // '料' -- '料' - FONTDATA_ITEM(203, 156, 156, fontpage_203_156_156), // '斜' -- '斜' - FONTDATA_ITEM(203, 176, 176, fontpage_203_176_176), // '新' -- '新' - FONTDATA_ITEM(203, 183, 183, fontpage_203_183_183), // '斷' -- '斷' - FONTDATA_ITEM(203, 188, 188, fontpage_203_188_188), // '於' -- '於' - FONTDATA_ITEM(204, 135, 135, fontpage_204_135_135), // '昇' -- '昇' - FONTDATA_ITEM(204, 142, 142, fontpage_204_142_142), // '明' -- '明' - FONTDATA_ITEM(204, 175, 175, fontpage_204_175_175), // '是' -- '是' - FONTDATA_ITEM(204, 194, 194, fontpage_204_194_194), // '時' -- '時' - FONTDATA_ITEM(205, 171, 171, fontpage_205_171_171), // '暫' -- '暫' - FONTDATA_ITEM(205, 244, 244, fontpage_205_244_244), // '更' -- '更' - FONTDATA_ITEM(206, 128, 128, fontpage_206_128_128), // '最' -- '最' - FONTDATA_ITEM(206, 137, 137, fontpage_206_137_137), // '有' -- '有' - FONTDATA_ITEM(206, 255, 255, fontpage_206_255_255), // '板' -- '板' - FONTDATA_ITEM(207, 241, 241, fontpage_207_241_241), // '柱' -- '柱' - FONTDATA_ITEM(208, 161, 161, fontpage_208_161_161), // '校' -- '校' - FONTDATA_ITEM(208, 188, 188, fontpage_208_188_188), // '格' -- '格' - FONTDATA_ITEM(209, 157, 157, fontpage_209_157_157), // '條' -- '條' - FONTDATA_ITEM(209, 196, 196, fontpage_209_196_196), // '棄' -- '棄' - FONTDATA_ITEM(211, 253, 253, fontpage_211_253_253), // '槽' -- '槽' - FONTDATA_ITEM(212, 217, 217, fontpage_212_217_217), // '橙' -- '橙' - FONTDATA_ITEM(212, 223, 223, fontpage_212_223_223), // '機' -- '機' - FONTDATA_ITEM(213, 162, 162, fontpage_213_162_162), // '檢' -- '檢' - FONTDATA_ITEM(214, 226, 227, fontpage_214_226_227), // '止' -- '正' - FONTDATA_ITEM(214, 229, 229, fontpage_214_229_229), // '步' -- '步' - FONTDATA_ITEM(214, 248, 248, fontpage_214_248_248), // '歸' -- '歸' - FONTDATA_ITEM(215, 188, 188, fontpage_215_188_188), // '殼' -- '殼' - FONTDATA_ITEM(215, 212, 212, fontpage_215_212_212), // '比' -- '比' - FONTDATA_ITEM(217, 146, 146, fontpage_217_146_146), // '沒' -- '沒' - FONTDATA_ITEM(219, 136, 136, fontpage_219_136_136), // '消' -- '消' - FONTDATA_ITEM(219, 225, 225, fontpage_219_225_225), // '淡' -- '淡' - FONTDATA_ITEM(220, 133, 133, fontpage_220_133_133), // '清' -- '清' - FONTDATA_ITEM(220, 172, 172, fontpage_220_172_172), // '測' -- '測' - FONTDATA_ITEM(221, 144, 144, fontpage_221_144_144), // '源' -- '源' - FONTDATA_ITEM(221, 150, 150, fontpage_221_150_150), // '準' -- '準' - FONTDATA_ITEM(221, 171, 171, fontpage_221_171_171), // '溫' -- '溫' - FONTDATA_ITEM(223, 192, 192, fontpage_223_192_192), // '激' -- '激' - FONTDATA_ITEM(226, 161, 161, fontpage_226_161_161), // '無' -- '無' - FONTDATA_ITEM(227, 177, 177, fontpage_227_177_177), // '熱' -- '熱' - FONTDATA_ITEM(227, 200, 200, fontpage_227_200_200), // '燈' -- '燈' - FONTDATA_ITEM(228, 199, 199, fontpage_228_199_199), // '片' -- '片' - FONTDATA_ITEM(228, 233, 233, fontpage_228_233_233), // '物' -- '物' - FONTDATA_ITEM(231, 135, 135, fontpage_231_135_135), // '率' -- '率' - FONTDATA_ITEM(234, 168, 168, fontpage_234_168_168), // '用' -- '用' - FONTDATA_ITEM(234, 204, 204, fontpage_234_204_204), // '界' -- '界' - FONTDATA_ITEM(236, 253, 253, fontpage_236_253_253), // '白' -- '白' - FONTDATA_ITEM(237, 132, 132, fontpage_237_132_132), // '的' -- '的' - FONTDATA_ITEM(237, 227, 227, fontpage_237_227_227), // '監' -- '監' - FONTDATA_ITEM(237, 244, 244, fontpage_237_244_244), // '直' -- '直' - FONTDATA_ITEM(238, 160, 160, fontpage_238_160_160), // '眠' -- '眠' - FONTDATA_ITEM(240, 141, 141, fontpage_240_141_141), // '砍' -- '砍' - FONTDATA_ITEM(241, 186, 186, fontpage_241_186_186), // '確' -- '確' - FONTDATA_ITEM(243, 251, 251, fontpage_243_251_251), // '移' -- '移' - FONTDATA_ITEM(244, 205, 205, fontpage_244_205_205), // '積' -- '積' - FONTDATA_ITEM(245, 239, 239, fontpage_245_239_239), // '端' -- '端' - FONTDATA_ITEM(246, 201, 201, fontpage_246_201_201), // '等' -- '等' - FONTDATA_ITEM(247, 161, 161, fontpage_247_161_161), // '管' -- '管' - FONTDATA_ITEM(247, 177, 177, fontpage_247_177_177), // '箱' -- '箱' - FONTDATA_ITEM(249, 251, 251, fontpage_249_251_251), // '系' -- '系' - FONTDATA_ITEM(250, 133, 133, fontpage_250_133_133), // '紅' -- '紅' - FONTDATA_ITEM(250, 162, 162, fontpage_250_162_162), // '索' -- '索' - FONTDATA_ITEM(250, 171, 171, fontpage_250_171_171), // '紫' -- '紫' - FONTDATA_ITEM(250, 176, 176, fontpage_250_176_176), // '細' -- '細' - FONTDATA_ITEM(250, 194, 194, fontpage_250_194_194), // '終' -- '終' - FONTDATA_ITEM(250, 241, 242, fontpage_250_241_242), // '統' -- '絲' - FONTDATA_ITEM(251, 160, 160, fontpage_251_160_160), // '綠' -- '綠' - FONTDATA_ITEM(251, 178, 178, fontpage_251_178_178), // '網' -- '網' - FONTDATA_ITEM(251, 210, 210, fontpage_251_210_210), // '緒' -- '緒' - FONTDATA_ITEM(251, 218, 218, fontpage_251_218_218), // '線' -- '線' - FONTDATA_ITEM(251, 232, 232, fontpage_251_232_232), // '編' -- '編' - FONTDATA_ITEM(252, 174, 174, fontpage_252_174_174), // '縮' -- '縮' - FONTDATA_ITEM(252, 189, 189, fontpage_252_189_189), // '總' -- '總' - FONTDATA_ITEM(252, 252, 252, fontpage_252_252_252), // '繼' -- '繼' - FONTDATA_ITEM(253, 140, 140, fontpage_253_140_140), // '續' -- '續' - FONTDATA_ITEM(253, 162, 162, fontpage_253_162_162), // '红' -- '红' - FONTDATA_ITEM(254, 238, 238, fontpage_254_238_238), // '置' -- '置' - FONTDATA_ITEM(254, 242, 242, fontpage_254_242_242), // '署' -- '署' - FONTDATA_ITEM(256, 240, 240, fontpage_256_240_240), // '聰' -- '聰' - FONTDATA_ITEM(259, 234, 234, fontpage_259_234_234), // '自' -- '自' - FONTDATA_ITEM(267, 205, 205, fontpage_267_205_205), // '藍' -- '藍' - FONTDATA_ITEM(272, 204, 204, fontpage_272_204_204), // '行' -- '行' - FONTDATA_ITEM(272, 232, 232, fontpage_272_232_232), // '表' -- '表' - FONTDATA_ITEM(273, 171, 171, fontpage_273_171_171), // '被' -- '被' - FONTDATA_ITEM(273, 197, 197, fontpage_273_197_197), // '装' -- '装' - FONTDATA_ITEM(273, 221, 221, fontpage_273_221_221), // '裝' -- '裝' - FONTDATA_ITEM(274, 135, 135, fontpage_274_135_135), // '複' -- '複' - FONTDATA_ITEM(275, 210, 210, fontpage_275_210_210), // '角' -- '角' - FONTDATA_ITEM(276, 136, 136, fontpage_276_136_136), // '計' -- '計' - FONTDATA_ITEM(276, 138, 138, fontpage_276_138_138), // '訊' -- '訊' - FONTDATA_ITEM(276, 152, 152, fontpage_276_152_152), // '記' -- '記' - FONTDATA_ITEM(276, 173, 173, fontpage_276_173_173), // '設' -- '設' - FONTDATA_ITEM(276, 230, 230, fontpage_276_230_230), // '試' -- '試' - FONTDATA_ITEM(277, 141, 141, fontpage_277_141_141), // '認' -- '認' - FONTDATA_ITEM(277, 164, 164, fontpage_277_164_164), // '誤' -- '誤' - FONTDATA_ITEM(277, 191, 191, fontpage_277_191_191), // '調' -- '調' - FONTDATA_ITEM(277, 203, 203, fontpage_277_203_203), // '請' -- '請' - FONTDATA_ITEM(278, 240, 240, fontpage_278_240_240), // '議' -- '議' - FONTDATA_ITEM(279, 128, 128, fontpage_279_128_128), // '讀' -- '讀' - FONTDATA_ITEM(279, 138, 138, fontpage_279_138_138), // '變' -- '變' - FONTDATA_ITEM(281, 199, 199, fontpage_281_199_199), // '資' -- '資' - FONTDATA_ITEM(283, 221, 221, fontpage_283_221_221), // '距' -- '距' - FONTDATA_ITEM(285, 202, 202, fontpage_285_202_202), // '車' -- '車' - FONTDATA_ITEM(285, 223, 223, fontpage_285_223_223), // '軟' -- '軟' - FONTDATA_ITEM(285, 248, 248, fontpage_285_248_248), // '軸' -- '軸' - FONTDATA_ITEM(286, 137, 137, fontpage_286_137_137), // '載' -- '載' - FONTDATA_ITEM(286, 175, 175, fontpage_286_175_175), // '輯' -- '輯' - FONTDATA_ITEM(286, 184, 184, fontpage_286_184_184), // '輸' -- '輸' - FONTDATA_ITEM(286, 201, 201, fontpage_286_201_201), // '轉' -- '轉' - FONTDATA_ITEM(287, 209, 209, fontpage_287_209_209), // '近' -- '近' - FONTDATA_ITEM(287, 212, 212, fontpage_287_212_212), // '返' -- '返' - FONTDATA_ITEM(288, 128, 128, fontpage_288_128_128), // '退' -- '退' - FONTDATA_ITEM(288, 159, 159, fontpage_288_159_159), // '速' -- '速' - FONTDATA_ITEM(288, 163, 163, fontpage_288_163_163), // '連' -- '連' - FONTDATA_ITEM(288, 178, 178, fontpage_288_178_178), // '進' -- '進' - FONTDATA_ITEM(288, 203, 203, fontpage_288_203_203), // '運' -- '運' - FONTDATA_ITEM(288, 212, 212, fontpage_288_212_212), // '達' -- '達' - FONTDATA_ITEM(288, 248, 248, fontpage_288_248_248), // '選' -- '選' - FONTDATA_ITEM(289, 132, 132, fontpage_289_132_132), // '還' -- '還' - FONTDATA_ITEM(289, 138, 138, fontpage_289_138_138), // '邊' -- '邊' - FONTDATA_ITEM(289, 232, 232, fontpage_289_232_232), // '部' -- '部' - FONTDATA_ITEM(291, 203, 203, fontpage_291_203_203), // '釋' -- '釋' - FONTDATA_ITEM(291, 205, 205, fontpage_291_205_205), // '重' -- '重' - FONTDATA_ITEM(291, 207, 207, fontpage_291_207_207), // '量' -- '量' - FONTDATA_ITEM(291, 221, 221, fontpage_291_221_221), // '針' -- '針' - FONTDATA_ITEM(292, 149, 149, fontpage_292_149_149), // '鈕' -- '鈕' - FONTDATA_ITEM(294, 175, 175, fontpage_294_175_175), // '錯' -- '錯' - FONTDATA_ITEM(294, 245, 245, fontpage_294_245_245), // '鍵' -- '鍵' - FONTDATA_ITEM(298, 247, 247, fontpage_298_247_247), // '長' -- '長' - FONTDATA_ITEM(299, 137, 137, fontpage_299_137_137), // '閉' -- '閉' - FONTDATA_ITEM(299, 139, 139, fontpage_299_139_139), // '開' -- '開' - FONTDATA_ITEM(299, 147, 147, fontpage_299_147_147), // '間' -- '間' - FONTDATA_ITEM(299, 220, 220, fontpage_299_220_220), // '關' -- '關' - FONTDATA_ITEM(300, 205, 205, fontpage_300_205_205), // '降' -- '降' - FONTDATA_ITEM(300, 228, 228, fontpage_300_228_228), // '除' -- '除' - FONTDATA_ITEM(301, 142, 142, fontpage_301_142_142), // '階' -- '階' - FONTDATA_ITEM(301, 217, 217, fontpage_301_217_217), // '雙' -- '雙' - FONTDATA_ITEM(301, 226, 226, fontpage_301_226_226), // '離' -- '離' - FONTDATA_ITEM(301, 251, 251, fontpage_301_251_251), // '電' -- '電' - FONTDATA_ITEM(302, 210, 210, fontpage_302_210_210), // '青' -- '青' - FONTDATA_ITEM(302, 222, 222, fontpage_302_222_222), // '非' -- '非' - FONTDATA_ITEM(302, 226, 226, fontpage_302_226_226), // '面' -- '面' - FONTDATA_ITEM(304, 133, 133, fontpage_304_133_133), // '項' -- '項' - FONTDATA_ITEM(304, 144, 144, fontpage_304_144_144), // '預' -- '預' - FONTDATA_ITEM(304, 205, 205, fontpage_304_205_205), // '額' -- '額' - FONTDATA_ITEM(304, 222, 222, fontpage_304_222_222), // '類' -- '類' - FONTDATA_ITEM(305, 168, 168, fontpage_305_168_168), // '風' -- '風' - FONTDATA_ITEM(305, 253, 253, fontpage_305_253_253), // '飽' -- '飽' - FONTDATA_ITEM(306, 152, 152, fontpage_306_152_152), // '餘' -- '餘' - FONTDATA_ITEM(307, 172, 172, fontpage_307_172_172), // '馬' -- '馬' - FONTDATA_ITEM(308, 197, 197, fontpage_308_197_197), // '驅' -- '驅' - FONTDATA_ITEM(309, 212, 212, fontpage_309_212_212), // '體' -- '體' - FONTDATA_ITEM(309, 216, 216, fontpage_309_216_216), // '高' -- '高' - FONTDATA_ITEM(317, 195, 195, fontpage_317_195_195), // '黃' -- '黃' - FONTDATA_ITEM(317, 222, 222, fontpage_317_222_222), // '點' -- '點' - FONTDATA_ITEM(318, 202, 202, fontpage_318_202_202), // '齊' -- '齊' - FONTDATA_ITEM(510, 154, 154, fontpage_510_154_154), // '：' -- '：' +static const uxg_fontinfo_t g_fontinfo_zh_TW[] PROGMEM = { + FONTDATA_ITEM(69, 191, 191, fontpage_69_191_191), // '⊿' -- '⊿' + FONTDATA_ITEM(156, 128, 128, fontpage_156_128_128), // '一' -- '一' + FONTDATA_ITEM(156, 137, 139, fontpage_156_137_139), // '三' -- '下' + FONTDATA_ITEM(156, 141, 141, fontpage_156_141_141), // '不' -- '不' + FONTDATA_ITEM(156, 166, 166, fontpage_156_166_166), // '並' -- '並' + FONTDATA_ITEM(156, 173, 173, fontpage_156_173_173), // '中' -- '中' + FONTDATA_ITEM(156, 187, 187, fontpage_156_187_187), // '主' -- '主' + FONTDATA_ITEM(156, 203, 203, fontpage_156_203_203), // '之' -- '之' + FONTDATA_ITEM(157, 164, 164, fontpage_157_164_164), // '交' -- '交' + FONTDATA_ITEM(157, 174, 174, fontpage_157_174_174), // '亮' -- '亮' + FONTDATA_ITEM(157, 228, 228, fontpage_157_228_228), // '令' -- '令' + FONTDATA_ITEM(157, 246, 246, fontpage_157_246_246), // '件' -- '件' + FONTDATA_ITEM(157, 253, 253, fontpage_157_253_253), // '份' -- '份' + FONTDATA_ITEM(158, 145, 145, fontpage_158_145_145), // '休' -- '休' + FONTDATA_ITEM(158, 205, 206, fontpage_158_205_206), // '位' -- '低' + FONTDATA_ITEM(158, 220, 220, fontpage_158_220_220), // '作' -- '作' + FONTDATA_ITEM(159, 155, 155, fontpage_159_155_155), // '供' -- '供' + FONTDATA_ITEM(159, 221, 221, fontpage_159_221_221), // '保' -- '保' + FONTDATA_ITEM(159, 225, 225, fontpage_159_225_225), // '信' -- '信' + FONTDATA_ITEM(160, 139, 139, fontpage_160_139_139), // '個' -- '個' + FONTDATA_ITEM(160, 188, 188, fontpage_160_188_188), // '值' -- '值' + FONTDATA_ITEM(160, 207, 207, fontpage_160_207_207), // '偏' -- '偏' + FONTDATA_ITEM(160, 220, 220, fontpage_160_220_220), // '停' -- '停' + FONTDATA_ITEM(160, 245, 245, fontpage_160_245_245), // '偵' -- '偵' + FONTDATA_ITEM(161, 153, 153, fontpage_161_153_153), // '備' -- '備' + FONTDATA_ITEM(161, 179, 179, fontpage_161_179_179), // '傳' -- '傳' + FONTDATA_ITEM(161, 190, 190, fontpage_161_190_190), // '傾' -- '傾' + FONTDATA_ITEM(162, 178, 178, fontpage_162_178_178), // '儲' -- '儲' + FONTDATA_ITEM(162, 197, 197, fontpage_162_197_197), // '充' -- '充' + FONTDATA_ITEM(162, 200, 201, fontpage_162_200_201), // '先' -- '光' + FONTDATA_ITEM(162, 229, 229, fontpage_162_229_229), // '入' -- '入' + FONTDATA_ITEM(162, 232, 232, fontpage_162_232_232), // '全' -- '全' + FONTDATA_ITEM(162, 241, 241, fontpage_162_241_241), // '共' -- '共' + FONTDATA_ITEM(162, 247, 247, fontpage_162_247_247), // '具' -- '具' + FONTDATA_ITEM(163, 151, 151, fontpage_163_151_151), // '冗' -- '冗' + FONTDATA_ITEM(163, 183, 183, fontpage_163_183_183), // '冷' -- '冷' + FONTDATA_ITEM(163, 198, 198, fontpage_163_198_198), // '准' -- '准' + FONTDATA_ITEM(163, 250, 250, fontpage_163_250_250), // '出' -- '出' + FONTDATA_ITEM(164, 134, 134, fontpage_164_134_134), // '分' -- '分' + FONTDATA_ITEM(164, 151, 151, fontpage_164_151_151), // '列' -- '列' + FONTDATA_ITEM(164, 157, 157, fontpage_164_157_157), // '初' -- '初' + FONTDATA_ITEM(164, 176, 176, fontpage_164_176_176), // '到' -- '到' + FONTDATA_ITEM(164, 182, 183, fontpage_164_182_183), // '制' -- '刷' + FONTDATA_ITEM(164, 245, 245, fontpage_164_245_245), // '創' -- '創' + FONTDATA_ITEM(165, 155, 155, fontpage_165_155_155), // '力' -- '力' + FONTDATA_ITEM(165, 160, 160, fontpage_165_160_160), // '加' -- '加' + FONTDATA_ITEM(165, 213, 213, fontpage_165_213_213), // '動' -- '動' + FONTDATA_ITEM(166, 150, 150, fontpage_166_150_150), // '化' -- '化' + FONTDATA_ITEM(166, 202, 202, fontpage_166_202_202), // '半' -- '半' + FONTDATA_ITEM(166, 212, 212, fontpage_166_212_212), // '協' -- '協' + FONTDATA_ITEM(166, 225, 225, fontpage_166_225_225), // '卡' -- '卡' + FONTDATA_ITEM(166, 240, 240, fontpage_166_240_240), // '印' -- '印' + FONTDATA_ITEM(166, 248, 248, fontpage_166_248_248), // '卸' -- '卸' + FONTDATA_ITEM(166, 251, 251, fontpage_166_251_251), // '卻' -- '卻' + FONTDATA_ITEM(167, 159, 159, fontpage_167_159_159), // '原' -- '原' + FONTDATA_ITEM(167, 205, 205, fontpage_167_205_205), // '反' -- '反' + FONTDATA_ITEM(167, 214, 214, fontpage_167_214_214), // '取' -- '取' + FONTDATA_ITEM(167, 240, 240, fontpage_167_240_240), // '台' -- '台' + FONTDATA_ITEM(168, 136, 136, fontpage_168_136_136), // '合' -- '合' + FONTDATA_ITEM(168, 166, 166, fontpage_168_166_166), // '否' -- '否' + FONTDATA_ITEM(168, 202, 202, fontpage_168_202_202), // '告' -- '告' + FONTDATA_ITEM(168, 253, 253, fontpage_168_253_253), // '命' -- '命' + FONTDATA_ITEM(169, 140, 140, fontpage_169_140_140), // '和' -- '和' + FONTDATA_ITEM(170, 223, 223, fontpage_170_223_223), // '啟' -- '啟' + FONTDATA_ITEM(171, 174, 174, fontpage_171_174_174), // '單' -- '單' + FONTDATA_ITEM(172, 180, 180, fontpage_172_180_180), // '嘴' -- '嘴' + FONTDATA_ITEM(172, 232, 232, fontpage_172_232_232), // '器' -- '器' + FONTDATA_ITEM(172, 244, 244, fontpage_172_244_244), // '噴' -- '噴' + FONTDATA_ITEM(173, 222, 222, fontpage_173_222_222), // '回' -- '回' + FONTDATA_ITEM(173, 224, 224, fontpage_173_224_224), // '因' -- '因' + FONTDATA_ITEM(173, 250, 250, fontpage_173_250_250), // '固' -- '固' + FONTDATA_ITEM(174, 150, 150, fontpage_174_150_150), // '圖' -- '圖' + FONTDATA_ITEM(174, 168, 168, fontpage_174_168_168), // '在' -- '在' + FONTDATA_ITEM(175, 139, 139, fontpage_175_139_139), // '型' -- '型' + FONTDATA_ITEM(175, 247, 247, fontpage_175_247_247), // '執' -- '執' + FONTDATA_ITEM(176, 202, 202, fontpage_176_202_202), // '塊' -- '塊' + FONTDATA_ITEM(176, 235, 235, fontpage_176_235_235), // '填' -- '填' + FONTDATA_ITEM(177, 138, 138, fontpage_177_138_138), // '墊' -- '墊' + FONTDATA_ITEM(178, 150, 150, fontpage_178_150_150), // '外' -- '外' + FONTDATA_ITEM(178, 154, 154, fontpage_178_154_154), // '多' -- '多' + FONTDATA_ITEM(178, 160, 160, fontpage_178_160_160), // '夠' -- '夠' + FONTDATA_ITEM(178, 167, 167, fontpage_178_167_167), // '大' -- '大' + FONTDATA_ITEM(178, 169, 170, fontpage_178_169_170), // '天' -- '太' + FONTDATA_ITEM(178, 177, 177, fontpage_178_177_177), // '失' -- '失' + FONTDATA_ITEM(179, 203, 203, fontpage_179_203_203), // '始' -- '始' + FONTDATA_ITEM(181, 146, 146, fontpage_181_146_146), // '媒' -- '媒' + FONTDATA_ITEM(182, 208, 208, fontpage_182_208_208), // '子' -- '子' + FONTDATA_ITEM(182, 216, 216, fontpage_182_216_216), // '存' -- '存' + FONTDATA_ITEM(183, 137, 137, fontpage_183_137_137), // '安' -- '安' + FONTDATA_ITEM(183, 140, 140, fontpage_183_140_140), // '完' -- '完' + FONTDATA_ITEM(183, 154, 154, fontpage_183_154_154), // '定' -- '定' + FONTDATA_ITEM(183, 162, 162, fontpage_183_162_162), // '客' -- '客' + FONTDATA_ITEM(183, 185, 185, fontpage_183_185_185), // '容' -- '容' + FONTDATA_ITEM(184, 141, 141, fontpage_184_141_141), // '對' -- '對' + FONTDATA_ITEM(184, 143, 143, fontpage_184_143_143), // '小' -- '小' + FONTDATA_ITEM(184, 177, 177, fontpage_184_177_177), // '就' -- '就' + FONTDATA_ITEM(187, 229, 229, fontpage_187_229_229), // '工' -- '工' + FONTDATA_ITEM(187, 238, 238, fontpage_187_238_238), // '差' -- '差' + FONTDATA_ITEM(187, 242, 242, fontpage_187_242_242), // '已' -- '已' + FONTDATA_ITEM(188, 243, 243, fontpage_188_243_243), // '平' -- '平' + FONTDATA_ITEM(189, 138, 138, fontpage_189_138_138), // '床' -- '床' + FONTDATA_ITEM(189, 166, 166, fontpage_189_166_166), // '度' -- '度' + FONTDATA_ITEM(189, 226, 226, fontpage_189_226_226), // '廢' -- '廢' + FONTDATA_ITEM(189, 250, 250, fontpage_189_250_250), // '建' -- '建' + FONTDATA_ITEM(190, 149, 149, fontpage_190_149_149), // '引' -- '引' + FONTDATA_ITEM(191, 133, 133, fontpage_191_133_133), // '待' -- '待' + FONTDATA_ITEM(191, 140, 140, fontpage_191_140_140), // '後' -- '後' + FONTDATA_ITEM(191, 145, 145, fontpage_191_145_145), // '徑' -- '徑' + FONTDATA_ITEM(191, 158, 158, fontpage_191_158_158), // '從' -- '從' + FONTDATA_ITEM(191, 169, 169, fontpage_191_169_169), // '復' -- '復' + FONTDATA_ITEM(191, 174, 174, fontpage_191_174_174), // '微' -- '微' + FONTDATA_ITEM(191, 195, 195, fontpage_191_195_195), // '心' -- '心' + FONTDATA_ITEM(192, 167, 167, fontpage_192_167_167), // '性' -- '性' + FONTDATA_ITEM(192, 226, 226, fontpage_192_226_226), // '恢' -- '恢' + FONTDATA_ITEM(192, 239, 239, fontpage_192_239_239), // '息' -- '息' + FONTDATA_ITEM(195, 182, 182, fontpage_195_182_182), // '憶' -- '憶' + FONTDATA_ITEM(195, 201, 201, fontpage_195_201_201), // '應' -- '應' + FONTDATA_ITEM(196, 144, 144, fontpage_196_144_144), // '成' -- '成' + FONTDATA_ITEM(196, 182, 182, fontpage_196_182_182), // '戶' -- '戶' + FONTDATA_ITEM(196, 192, 192, fontpage_196_192_192), // '所' -- '所' + FONTDATA_ITEM(196, 199, 199, fontpage_196_199_199), // '扇' -- '扇' + FONTDATA_ITEM(196, 203, 203, fontpage_196_203_203), // '手' -- '手' + FONTDATA_ITEM(196, 211, 211, fontpage_196_211_211), // '打' -- '打' + FONTDATA_ITEM(196, 249, 249, fontpage_196_249_249), // '批' -- '批' + FONTDATA_ITEM(197, 150, 150, fontpage_197_150_150), // '抖' -- '抖' + FONTDATA_ITEM(197, 189, 189, fontpage_197_189_189), // '抽' -- '抽' + FONTDATA_ITEM(197, 212, 212, fontpage_197_212_212), // '拔' -- '拔' + FONTDATA_ITEM(198, 137, 137, fontpage_198_137_137), // '按' -- '按' + FONTDATA_ITEM(199, 137, 137, fontpage_199_137_137), // '掉' -- '掉' + FONTDATA_ITEM(199, 162, 162, fontpage_199_162_162), // '探' -- '探' + FONTDATA_ITEM(199, 165, 165, fontpage_199_165_165), // '接' -- '接' + FONTDATA_ITEM(199, 167, 167, fontpage_199_167_167), // '控' -- '控' + FONTDATA_ITEM(199, 208, 208, fontpage_199_208_208), // '提' -- '提' + FONTDATA_ITEM(199, 210, 210, fontpage_199_210_210), // '插' -- '插' + FONTDATA_ITEM(199, 219, 219, fontpage_199_219_219), // '換' -- '換' + FONTDATA_ITEM(201, 199, 199, fontpage_201_199_199), // '擇' -- '擇' + FONTDATA_ITEM(201, 202, 203, fontpage_201_202_203), // '擊' -- '擋' + FONTDATA_ITEM(201, 224, 224, fontpage_201_224_224), // '擠' -- '擠' + FONTDATA_ITEM(202, 182, 182, fontpage_202_182_182), // '收' -- '收' + FONTDATA_ITEM(202, 190, 190, fontpage_202_190_190), // '放' -- '放' + FONTDATA_ITEM(202, 215, 215, fontpage_202_215_215), // '敗' -- '敗' + FONTDATA_ITEM(202, 244, 244, fontpage_202_244_244), // '整' -- '整' + FONTDATA_ITEM(202, 248, 248, fontpage_202_248_248), // '數' -- '數' + FONTDATA_ITEM(203, 153, 153, fontpage_203_153_153), // '料' -- '料' + FONTDATA_ITEM(203, 156, 156, fontpage_203_156_156), // '斜' -- '斜' + FONTDATA_ITEM(203, 176, 176, fontpage_203_176_176), // '新' -- '新' + FONTDATA_ITEM(203, 183, 183, fontpage_203_183_183), // '斷' -- '斷' + FONTDATA_ITEM(203, 188, 188, fontpage_203_188_188), // '於' -- '於' + FONTDATA_ITEM(204, 135, 135, fontpage_204_135_135), // '昇' -- '昇' + FONTDATA_ITEM(204, 142, 142, fontpage_204_142_142), // '明' -- '明' + FONTDATA_ITEM(204, 175, 175, fontpage_204_175_175), // '是' -- '是' + FONTDATA_ITEM(204, 194, 194, fontpage_204_194_194), // '時' -- '時' + FONTDATA_ITEM(205, 171, 171, fontpage_205_171_171), // '暫' -- '暫' + FONTDATA_ITEM(205, 244, 244, fontpage_205_244_244), // '更' -- '更' + FONTDATA_ITEM(206, 128, 128, fontpage_206_128_128), // '最' -- '最' + FONTDATA_ITEM(206, 137, 137, fontpage_206_137_137), // '有' -- '有' + FONTDATA_ITEM(206, 255, 255, fontpage_206_255_255), // '板' -- '板' + FONTDATA_ITEM(207, 241, 241, fontpage_207_241_241), // '柱' -- '柱' + FONTDATA_ITEM(208, 161, 161, fontpage_208_161_161), // '校' -- '校' + FONTDATA_ITEM(208, 188, 188, fontpage_208_188_188), // '格' -- '格' + FONTDATA_ITEM(209, 157, 157, fontpage_209_157_157), // '條' -- '條' + FONTDATA_ITEM(209, 196, 196, fontpage_209_196_196), // '棄' -- '棄' + FONTDATA_ITEM(211, 253, 253, fontpage_211_253_253), // '槽' -- '槽' + FONTDATA_ITEM(212, 217, 217, fontpage_212_217_217), // '橙' -- '橙' + FONTDATA_ITEM(212, 223, 223, fontpage_212_223_223), // '機' -- '機' + FONTDATA_ITEM(213, 162, 162, fontpage_213_162_162), // '檢' -- '檢' + FONTDATA_ITEM(214, 226, 227, fontpage_214_226_227), // '止' -- '正' + FONTDATA_ITEM(214, 229, 229, fontpage_214_229_229), // '步' -- '步' + FONTDATA_ITEM(214, 248, 248, fontpage_214_248_248), // '歸' -- '歸' + FONTDATA_ITEM(215, 188, 188, fontpage_215_188_188), // '殼' -- '殼' + FONTDATA_ITEM(215, 212, 212, fontpage_215_212_212), // '比' -- '比' + FONTDATA_ITEM(217, 146, 146, fontpage_217_146_146), // '沒' -- '沒' + FONTDATA_ITEM(219, 136, 136, fontpage_219_136_136), // '消' -- '消' + FONTDATA_ITEM(219, 225, 225, fontpage_219_225_225), // '淡' -- '淡' + FONTDATA_ITEM(220, 133, 133, fontpage_220_133_133), // '清' -- '清' + FONTDATA_ITEM(220, 172, 172, fontpage_220_172_172), // '測' -- '測' + FONTDATA_ITEM(221, 144, 144, fontpage_221_144_144), // '源' -- '源' + FONTDATA_ITEM(221, 150, 150, fontpage_221_150_150), // '準' -- '準' + FONTDATA_ITEM(221, 171, 171, fontpage_221_171_171), // '溫' -- '溫' + FONTDATA_ITEM(223, 192, 192, fontpage_223_192_192), // '激' -- '激' + FONTDATA_ITEM(226, 161, 161, fontpage_226_161_161), // '無' -- '無' + FONTDATA_ITEM(227, 177, 177, fontpage_227_177_177), // '熱' -- '熱' + FONTDATA_ITEM(227, 200, 200, fontpage_227_200_200), // '燈' -- '燈' + FONTDATA_ITEM(228, 199, 199, fontpage_228_199_199), // '片' -- '片' + FONTDATA_ITEM(228, 233, 233, fontpage_228_233_233), // '物' -- '物' + FONTDATA_ITEM(231, 135, 135, fontpage_231_135_135), // '率' -- '率' + FONTDATA_ITEM(234, 168, 168, fontpage_234_168_168), // '用' -- '用' + FONTDATA_ITEM(234, 204, 204, fontpage_234_204_204), // '界' -- '界' + FONTDATA_ITEM(236, 253, 253, fontpage_236_253_253), // '白' -- '白' + FONTDATA_ITEM(237, 132, 132, fontpage_237_132_132), // '的' -- '的' + FONTDATA_ITEM(237, 227, 227, fontpage_237_227_227), // '監' -- '監' + FONTDATA_ITEM(237, 244, 244, fontpage_237_244_244), // '直' -- '直' + FONTDATA_ITEM(238, 160, 160, fontpage_238_160_160), // '眠' -- '眠' + FONTDATA_ITEM(240, 141, 141, fontpage_240_141_141), // '砍' -- '砍' + FONTDATA_ITEM(241, 186, 186, fontpage_241_186_186), // '確' -- '確' + FONTDATA_ITEM(243, 251, 251, fontpage_243_251_251), // '移' -- '移' + FONTDATA_ITEM(244, 205, 205, fontpage_244_205_205), // '積' -- '積' + FONTDATA_ITEM(245, 239, 239, fontpage_245_239_239), // '端' -- '端' + FONTDATA_ITEM(246, 201, 201, fontpage_246_201_201), // '等' -- '等' + FONTDATA_ITEM(247, 161, 161, fontpage_247_161_161), // '管' -- '管' + FONTDATA_ITEM(247, 177, 177, fontpage_247_177_177), // '箱' -- '箱' + FONTDATA_ITEM(249, 251, 251, fontpage_249_251_251), // '系' -- '系' + FONTDATA_ITEM(250, 133, 133, fontpage_250_133_133), // '紅' -- '紅' + FONTDATA_ITEM(250, 162, 162, fontpage_250_162_162), // '索' -- '索' + FONTDATA_ITEM(250, 171, 171, fontpage_250_171_171), // '紫' -- '紫' + FONTDATA_ITEM(250, 176, 176, fontpage_250_176_176), // '細' -- '細' + FONTDATA_ITEM(250, 194, 194, fontpage_250_194_194), // '終' -- '終' + FONTDATA_ITEM(250, 241, 242, fontpage_250_241_242), // '統' -- '絲' + FONTDATA_ITEM(251, 160, 160, fontpage_251_160_160), // '綠' -- '綠' + FONTDATA_ITEM(251, 178, 178, fontpage_251_178_178), // '網' -- '網' + FONTDATA_ITEM(251, 210, 210, fontpage_251_210_210), // '緒' -- '緒' + FONTDATA_ITEM(251, 218, 218, fontpage_251_218_218), // '線' -- '線' + FONTDATA_ITEM(251, 232, 232, fontpage_251_232_232), // '編' -- '編' + FONTDATA_ITEM(252, 174, 174, fontpage_252_174_174), // '縮' -- '縮' + FONTDATA_ITEM(252, 189, 189, fontpage_252_189_189), // '總' -- '總' + FONTDATA_ITEM(252, 252, 252, fontpage_252_252_252), // '繼' -- '繼' + FONTDATA_ITEM(253, 140, 140, fontpage_253_140_140), // '續' -- '續' + FONTDATA_ITEM(253, 162, 162, fontpage_253_162_162), // '红' -- '红' + FONTDATA_ITEM(254, 238, 238, fontpage_254_238_238), // '置' -- '置' + FONTDATA_ITEM(254, 242, 242, fontpage_254_242_242), // '署' -- '署' + FONTDATA_ITEM(256, 240, 240, fontpage_256_240_240), // '聰' -- '聰' + FONTDATA_ITEM(259, 234, 234, fontpage_259_234_234), // '自' -- '自' + FONTDATA_ITEM(267, 205, 205, fontpage_267_205_205), // '藍' -- '藍' + FONTDATA_ITEM(272, 204, 204, fontpage_272_204_204), // '行' -- '行' + FONTDATA_ITEM(272, 232, 232, fontpage_272_232_232), // '表' -- '表' + FONTDATA_ITEM(273, 171, 171, fontpage_273_171_171), // '被' -- '被' + FONTDATA_ITEM(273, 197, 197, fontpage_273_197_197), // '装' -- '装' + FONTDATA_ITEM(273, 221, 221, fontpage_273_221_221), // '裝' -- '裝' + FONTDATA_ITEM(274, 135, 135, fontpage_274_135_135), // '複' -- '複' + FONTDATA_ITEM(275, 210, 210, fontpage_275_210_210), // '角' -- '角' + FONTDATA_ITEM(276, 136, 136, fontpage_276_136_136), // '計' -- '計' + FONTDATA_ITEM(276, 138, 138, fontpage_276_138_138), // '訊' -- '訊' + FONTDATA_ITEM(276, 152, 152, fontpage_276_152_152), // '記' -- '記' + FONTDATA_ITEM(276, 173, 173, fontpage_276_173_173), // '設' -- '設' + FONTDATA_ITEM(276, 230, 230, fontpage_276_230_230), // '試' -- '試' + FONTDATA_ITEM(277, 141, 141, fontpage_277_141_141), // '認' -- '認' + FONTDATA_ITEM(277, 164, 164, fontpage_277_164_164), // '誤' -- '誤' + FONTDATA_ITEM(277, 191, 191, fontpage_277_191_191), // '調' -- '調' + FONTDATA_ITEM(277, 203, 203, fontpage_277_203_203), // '請' -- '請' + FONTDATA_ITEM(278, 240, 240, fontpage_278_240_240), // '議' -- '議' + FONTDATA_ITEM(279, 128, 128, fontpage_279_128_128), // '讀' -- '讀' + FONTDATA_ITEM(279, 138, 138, fontpage_279_138_138), // '變' -- '變' + FONTDATA_ITEM(281, 199, 199, fontpage_281_199_199), // '資' -- '資' + FONTDATA_ITEM(283, 221, 221, fontpage_283_221_221), // '距' -- '距' + FONTDATA_ITEM(285, 202, 202, fontpage_285_202_202), // '車' -- '車' + FONTDATA_ITEM(285, 223, 223, fontpage_285_223_223), // '軟' -- '軟' + FONTDATA_ITEM(285, 248, 248, fontpage_285_248_248), // '軸' -- '軸' + FONTDATA_ITEM(286, 137, 137, fontpage_286_137_137), // '載' -- '載' + FONTDATA_ITEM(286, 175, 175, fontpage_286_175_175), // '輯' -- '輯' + FONTDATA_ITEM(286, 184, 184, fontpage_286_184_184), // '輸' -- '輸' + FONTDATA_ITEM(286, 201, 201, fontpage_286_201_201), // '轉' -- '轉' + FONTDATA_ITEM(287, 209, 209, fontpage_287_209_209), // '近' -- '近' + FONTDATA_ITEM(287, 212, 212, fontpage_287_212_212), // '返' -- '返' + FONTDATA_ITEM(288, 128, 128, fontpage_288_128_128), // '退' -- '退' + FONTDATA_ITEM(288, 159, 159, fontpage_288_159_159), // '速' -- '速' + FONTDATA_ITEM(288, 163, 163, fontpage_288_163_163), // '連' -- '連' + FONTDATA_ITEM(288, 178, 178, fontpage_288_178_178), // '進' -- '進' + FONTDATA_ITEM(288, 203, 203, fontpage_288_203_203), // '運' -- '運' + FONTDATA_ITEM(288, 212, 212, fontpage_288_212_212), // '達' -- '達' + FONTDATA_ITEM(288, 248, 248, fontpage_288_248_248), // '選' -- '選' + FONTDATA_ITEM(289, 132, 132, fontpage_289_132_132), // '還' -- '還' + FONTDATA_ITEM(289, 138, 138, fontpage_289_138_138), // '邊' -- '邊' + FONTDATA_ITEM(289, 232, 232, fontpage_289_232_232), // '部' -- '部' + FONTDATA_ITEM(291, 203, 203, fontpage_291_203_203), // '釋' -- '釋' + FONTDATA_ITEM(291, 205, 205, fontpage_291_205_205), // '重' -- '重' + FONTDATA_ITEM(291, 207, 207, fontpage_291_207_207), // '量' -- '量' + FONTDATA_ITEM(291, 221, 221, fontpage_291_221_221), // '針' -- '針' + FONTDATA_ITEM(292, 149, 149, fontpage_292_149_149), // '鈕' -- '鈕' + FONTDATA_ITEM(294, 175, 175, fontpage_294_175_175), // '錯' -- '錯' + FONTDATA_ITEM(294, 245, 245, fontpage_294_245_245), // '鍵' -- '鍵' + FONTDATA_ITEM(298, 247, 247, fontpage_298_247_247), // '長' -- '長' + FONTDATA_ITEM(299, 137, 137, fontpage_299_137_137), // '閉' -- '閉' + FONTDATA_ITEM(299, 139, 139, fontpage_299_139_139), // '開' -- '開' + FONTDATA_ITEM(299, 147, 147, fontpage_299_147_147), // '間' -- '間' + FONTDATA_ITEM(299, 220, 220, fontpage_299_220_220), // '關' -- '關' + FONTDATA_ITEM(300, 205, 205, fontpage_300_205_205), // '降' -- '降' + FONTDATA_ITEM(300, 228, 228, fontpage_300_228_228), // '除' -- '除' + FONTDATA_ITEM(301, 142, 142, fontpage_301_142_142), // '階' -- '階' + FONTDATA_ITEM(301, 217, 217, fontpage_301_217_217), // '雙' -- '雙' + FONTDATA_ITEM(301, 226, 226, fontpage_301_226_226), // '離' -- '離' + FONTDATA_ITEM(301, 251, 251, fontpage_301_251_251), // '電' -- '電' + FONTDATA_ITEM(302, 210, 210, fontpage_302_210_210), // '青' -- '青' + FONTDATA_ITEM(302, 222, 222, fontpage_302_222_222), // '非' -- '非' + FONTDATA_ITEM(302, 226, 226, fontpage_302_226_226), // '面' -- '面' + FONTDATA_ITEM(304, 133, 133, fontpage_304_133_133), // '項' -- '項' + FONTDATA_ITEM(304, 144, 144, fontpage_304_144_144), // '預' -- '預' + FONTDATA_ITEM(304, 205, 205, fontpage_304_205_205), // '額' -- '額' + FONTDATA_ITEM(304, 222, 222, fontpage_304_222_222), // '類' -- '類' + FONTDATA_ITEM(305, 168, 168, fontpage_305_168_168), // '風' -- '風' + FONTDATA_ITEM(305, 253, 253, fontpage_305_253_253), // '飽' -- '飽' + FONTDATA_ITEM(306, 152, 152, fontpage_306_152_152), // '餘' -- '餘' + FONTDATA_ITEM(307, 172, 172, fontpage_307_172_172), // '馬' -- '馬' + FONTDATA_ITEM(308, 197, 197, fontpage_308_197_197), // '驅' -- '驅' + FONTDATA_ITEM(309, 212, 212, fontpage_309_212_212), // '體' -- '體' + FONTDATA_ITEM(309, 216, 216, fontpage_309_216_216), // '高' -- '高' + FONTDATA_ITEM(317, 195, 195, fontpage_317_195_195), // '黃' -- '黃' + FONTDATA_ITEM(317, 222, 222, fontpage_317_222_222), // '點' -- '點' + FONTDATA_ITEM(318, 202, 202, fontpage_318_202_202), // '齊' -- '齊' + FONTDATA_ITEM(510, 154, 154, fontpage_510_154_154), // '：' -- '：' }; diff --git a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp index 726eb2cc39..25e943a14d 100644 --- a/Marlin/src/lcd/dogm/marlinui_DOGM.cpp +++ b/Marlin/src/lcd/dogm/marlinui_DOGM.cpp @@ -79,6 +79,18 @@ U8G_CLASS u8g; #include LANGUAGE_DATA_INCL(LCD_LANGUAGE) +#ifdef LCD_LANGUAGE_2 + #include LANGUAGE_DATA_INCL(LCD_LANGUAGE_2) +#endif +#ifdef LCD_LANGUAGE_3 + #include LANGUAGE_DATA_INCL(LCD_LANGUAGE_3) +#endif +#ifdef LCD_LANGUAGE_4 + #include LANGUAGE_DATA_INCL(LCD_LANGUAGE_4) +#endif +#ifdef LCD_LANGUAGE_5 + #include LANGUAGE_DATA_INCL(LCD_LANGUAGE_5) +#endif #if HAS_LCD_CONTRAST @@ -293,7 +305,29 @@ void MarlinUI::init_lcd() { TERN_(LCD_SCREEN_ROT_180, u8g.setRot180()); TERN_(LCD_SCREEN_ROT_270, u8g.setRot270()); - uxg_SetUtf8Fonts(g_fontinfo, COUNT(g_fontinfo)); + update_language_font(); +} + +void MarlinUI::update_language_font() { + #if HAS_MULTI_LANGUAGE + switch (language) { + default: uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE), COUNT(LANG_FONT_INFO(LCD_LANGUAGE))); break; + #ifdef LCD_LANGUAGE_2 + case 1: uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE_2), COUNT(LANG_FONT_INFO(LCD_LANGUAGE_2))); break; + #endif + #ifdef LCD_LANGUAGE_3 + case 2: uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE_3), COUNT(LANG_FONT_INFO(LCD_LANGUAGE_3))); break; + #endif + #ifdef LCD_LANGUAGE_4 + case 3: uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE_4), COUNT(LANG_FONT_INFO(LCD_LANGUAGE_4))); break; + #endif + #ifdef LCD_LANGUAGE_5 + case 4: uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE_5), COUNT(LANG_FONT_INFO(LCD_LANGUAGE_5))); break; + #endif + } + #else + uxg_SetUtf8Fonts(LANG_FONT_INFO(LCD_LANGUAGE), COUNT(LANG_FONT_INFO(LCD_LANGUAGE))); + #endif } // The kill screen is displayed for unrecoverable conditions @@ -370,7 +404,7 @@ void MarlinUI::clear_lcd() { } // Automatically cleared by Picture Loop if (mark_as_selected(row, style & SS_INVERT)) { pixel_len_t n = LCD_PIXEL_WIDTH; // pixel width of string allowed - + const int plen = pstr ? calculateWidth(pstr) : 0, vlen = vstr ? utf8_strlen(vstr) : 0; if (style & SS_CENTER) { diff --git a/Marlin/src/lcd/dogm/marlinui_DOGM.h b/Marlin/src/lcd/dogm/marlinui_DOGM.h index e3ceb63f96..328b69b93b 100644 --- a/Marlin/src/lcd/dogm/marlinui_DOGM.h +++ b/Marlin/src/lcd/dogm/marlinui_DOGM.h @@ -27,7 +27,7 @@ #include "../../inc/MarlinConfigPre.h" -#include +#include #include "HAL_LCD_class_defines.h" //#define ALTERNATIVE_LCD diff --git a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp index d58be4dbaf..5fe8b61bf4 100644 --- a/Marlin/src/lcd/dogm/status_screen_DOGM.cpp +++ b/Marlin/src/lcd/dogm/status_screen_DOGM.cpp @@ -57,6 +57,10 @@ #include "../../feature/cooler.h" #endif +#if ENABLED(I2C_AMMETER) + #include "../../feature/ammeter.h" +#endif + #if HAS_POWER_MONITOR #include "../../feature/power_monitor.h" #endif @@ -260,29 +264,33 @@ FORCE_INLINE void _draw_centered_temp(const celsius_t temp, const uint8_t tx, co #define HOTEND_BITMAP(N,S) status_hotend_a_bmp #endif - if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { + #if DISABLED(STATUS_COMBINE_HEATERS) - #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) + if (PAGE_CONTAINS(STATUS_HEATERS_Y, STATUS_HEATERS_BOT)) { - const float prop = target - 20, - perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; - uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); - NOMORE(tall, BAR_TALL); + #define BAR_TALL (STATUS_HEATERS_HEIGHT - 2) - // Draw hotend bitmap, either whole or split by the heating percent - const uint8_t hx = STATUS_HOTEND_X(heater_id), - bw = STATUS_HOTEND_BYTEWIDTH(heater_id); - #if ENABLED(STATUS_HEAT_PERCENT) - if (isHeat && tall <= BAR_TALL) { - const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; - u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), false)); - u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), true) + ph * bw); - } - else - #endif - u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), isHeat)); + const float prop = target - 20, + perc = prop > 0 && temp >= 20 ? (temp - 20) / prop : 0; + uint8_t tall = uint8_t(perc * BAR_TALL + 0.5f); + NOMORE(tall, BAR_TALL); - } // PAGE_CONTAINS + // Draw hotend bitmap, either whole or split by the heating percent + const uint8_t hx = STATUS_HOTEND_X(heater_id), + bw = STATUS_HOTEND_BYTEWIDTH(heater_id); + #if ENABLED(STATUS_HEAT_PERCENT) + if (isHeat && tall <= BAR_TALL) { + const uint8_t ph = STATUS_HEATERS_HEIGHT - 1 - tall; + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, ph, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), false)); + u8g.drawBitmapP(hx, STATUS_HEATERS_Y + ph, bw, tall + 1, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), true) + ph * bw); + } + else + #endif + u8g.drawBitmapP(hx, STATUS_HEATERS_Y, bw, STATUS_HEATERS_HEIGHT, HOTEND_BITMAP(TERN(HAS_MMU, active_extruder, heater_id), isHeat)); + + } // PAGE_CONTAINS + + #endif // !STATUS_COMBINE_HEATERS if (PAGE_UNDER(7)) { #if HEATER_IDLE_HANDLER diff --git a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp index 2f8b5f67e2..c76857b6bb 100644 --- a/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp +++ b/Marlin/src/lcd/dogm/status_screen_lite_ST7920.cpp @@ -536,7 +536,7 @@ void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool static struct { bool E1_show_target : 1; bool E2_show_target : 1; - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED bool bed_show_target : 1; #endif } display_state = { diff --git a/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp b/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp index 7b4c470afe..2a21bd67ca 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_ssd1309_12864.cpp @@ -24,7 +24,7 @@ #if HAS_MARLINUI_U8GLIB #include "HAL_LCD_com_defines.h" -#include +#include #define WIDTH 128 #define HEIGHT 64 diff --git a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp index 84c10dbb4d..fda090338c 100644 --- a/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp +++ b/Marlin/src/lcd/dogm/u8g_dev_st7565_64128n_HAL.cpp @@ -57,7 +57,7 @@ #if HAS_MARLINUI_U8GLIB -#include +#include #include "HAL_LCD_com_defines.h" #define WIDTH 128 diff --git a/Marlin/src/lcd/dogm/u8g_fontutf8.h b/Marlin/src/lcd/dogm/u8g_fontutf8.h index 34e365cf95..9760ef106b 100644 --- a/Marlin/src/lcd/dogm/u8g_fontutf8.h +++ b/Marlin/src/lcd/dogm/u8g_fontutf8.h @@ -8,7 +8,7 @@ */ #pragma once -#include +#include #include "../fontutils.h" // the macro to indicate a UTF-8 string @@ -35,3 +35,6 @@ int uxg_GetUtf8StrPixelWidth(u8g_t *pu8g, const char *utf8_msg); int uxg_GetUtf8StrPixelWidthP(u8g_t *pu8g, PGM_P utf8_msg); #define uxg_GetFont(puxg) ((puxg)->font) + +#define _LANG_FONT_INFO(L) g_fontinfo_##L +#define LANG_FONT_INFO(L) _LANG_FONT_INFO(L) diff --git a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h index e8a48299cb..446bfcfd42 100644 --- a/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h +++ b/Marlin/src/lcd/dogm/ultralcd_st7920_u8glib_rrd_AVR.h @@ -35,7 +35,7 @@ #define PAGE_HEIGHT 16 // 256 byte framebuffer //#define PAGE_HEIGHT 32 // 512 byte framebuffer -#include +#include void ST7920_SWSPI_SND_8BIT(uint8_t val); diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.cpp b/Marlin/src/lcd/dwin/e3v2/dwin.cpp index 1b8c420afa..ca9413e09c 100644 --- a/Marlin/src/lcd/dwin/e3v2/dwin.cpp +++ b/Marlin/src/lcd/dwin/e3v2/dwin.cpp @@ -182,10 +182,10 @@ static uint8_t _card_percent = 0; static uint16_t _remain_time = 0; #if ENABLED(PAUSE_HEAT) - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND uint16_t resume_hotend_temp = 0; #endif - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED uint16_t resume_bed_temp = 0; #endif #endif @@ -2417,14 +2417,14 @@ void Draw_HomeOff_Menu() { #include "../../../libs/buzzer.h" void HMI_AudioFeedback(const bool success=true) { - #if USE_BEEPER - if (success) { - buzzer.tone(100, 659); - buzzer.tone(10, 0); - buzzer.tone(100, 698); - } - else - buzzer.tone(40, 440); + #if HAS_BUZZER + if (success) { + buzzer.tone(100, 659); + buzzer.tone(10, 0); + buzzer.tone(100, 698); + } + else + buzzer.tone(40, 440); #endif } diff --git a/Marlin/src/lcd/dwin/e3v2/dwin.h b/Marlin/src/lcd/dwin/e3v2/dwin.h index ad210db27d..0272748cd5 100644 --- a/Marlin/src/lcd/dwin/e3v2/dwin.h +++ b/Marlin/src/lcd/dwin/e3v2/dwin.h @@ -255,13 +255,13 @@ extern char print_filename[16]; extern millis_t dwin_heat_time; typedef struct { - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND celsius_t E_Temp = 0; #endif - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED celsius_t Bed_Temp = 0; #endif - #if ENABLED(HAS_FAN) + #if HAS_FAN int16_t Fan_speed = 0; #endif int16_t print_speed = 100; @@ -344,13 +344,13 @@ void HMI_Move_E(); void HMI_Zoffset(); -#if ENABLED(HAS_HOTEND) +#if HAS_HOTEND void HMI_ETemp(); #endif -#if ENABLED(HAS_HEATED_BED) +#if HAS_HEATED_BED void HMI_BedTemp(); #endif -#if ENABLED(HAS_FAN) +#if HAS_FAN void HMI_FanSpeed(); #endif diff --git a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp index 2e8df757eb..57ecc4bb65 100644 --- a/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp +++ b/Marlin/src/lcd/extui/dgus/DGUSScreenHandler.cpp @@ -622,7 +622,7 @@ void DGUSScreenHandler::HandleHeaterControl(DGUS_VP_Variable &var, void *val_ptr DEBUG_ECHOLNPGM("HandlePreheat"); uint8_t e_temp = 0; - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED uint8_t bed_temp = 0; #endif const uint16_t preheat_option = swap16(*(uint16_t*)val_ptr); diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp b/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp index 7d8581c9f3..c60d6e8bc4 100644 --- a/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp +++ b/Marlin/src/lcd/extui/dgus/mks/DGUSDisplayDef.cpp @@ -35,7 +35,7 @@ #include "../../ui_api.h" #include "../../../marlinui.h" -#if ENABLED(HAS_STEALTHCHOP) +#if HAS_STEALTHCHOP #include "../../../../module/stepper/trinamic.h" #endif diff --git a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp index aabe6fc531..0ee3828387 100644 --- a/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp +++ b/Marlin/src/lcd/extui/dgus/mks/DGUSScreenHandler.cpp @@ -37,7 +37,7 @@ #include "../../../../gcode/gcode.h" -#if ENABLED(HAS_STEALTHCHOP) +#if HAS_STEALTHCHOP #include "../../../../module/stepper/trinamic.h" #include "../../../../module/stepper/indirection.h" #endif @@ -396,7 +396,7 @@ void DGUSScreenHandler::Z_offset_select(DGUS_VP_Variable &var, void *val_ptr) { void DGUSScreenHandler::GetOffsetValue(DGUS_VP_Variable &var, void *val_ptr) { - #if ENABLED(HAS_BED_PROBE) + #if HAS_BED_PROBE int32_t value = swap32(*(int32_t *)val_ptr); float Offset = value / 100.0f; DEBUG_ECHOLNPAIR_F("\nget int6 offset >> ", value, 6); diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp index fd478c95a2..40ec16a9df 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/advanced_settings.cpp @@ -87,7 +87,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { .tag(13) .button(BTN_POS(1,7), BTN_SIZE(2,1), GET_TEXT_F(MSG_INTERFACE)) .tag(14) .button(BTN_POS(1,8), BTN_SIZE(2,1), GET_TEXT_F(MSG_RESTORE_DEFAULTS)) .colors(action_btn) - .tag(1). button( BTN_POS(1,9), BTN_SIZE(2,1), GET_TEXT_F(MSG_BACK)); + .tag(1). button( BTN_POS(1,9), BTN_SIZE(2,1), GET_TEXT_F(MSG_BUTTON_DONE)); #undef GRID_COLS #undef GRID_ROWS } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/main_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/main_menu.cpp index ae5e7d8ab1..8109ecef76 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/main_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/main_menu.cpp @@ -54,7 +54,7 @@ void MainMenu::onRedraw(draw_mode_t what) { .tag(8).button(BTN_POS(1,8), BTN_SIZE(2,1), GET_TEXT_F(MSG_ADVANCED_SETTINGS)) .tag(9).button(BTN_POS(1,9), BTN_SIZE(2,1), GET_TEXT_F(MSG_INFO_MENU)) .colors(action_btn) - .tag(1).button(BTN_POS(1,10), BTN_SIZE(2,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button(BTN_POS(1,10), BTN_SIZE(2,1), GET_TEXT_F(MSG_BUTTON_DONE)); } #undef GRID_COLS diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/tune_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/tune_menu.cpp index 31021c31c0..2f94555784 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/tune_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/bioprinter/tune_menu.cpp @@ -54,7 +54,7 @@ void TuneMenu::onRedraw(draw_mode_t what) { .enabled(!isPrinting()).tag(5).button(BTN_POS(1,5), BTN_SIZE(2,1), GET_TEXT_F(MSG_MOVE_TO_HOME)) .enabled(!isPrinting()).tag(6).button(BTN_POS(1,6), BTN_SIZE(2,1), GET_TEXT_F(MSG_RAISE_PLUNGER)) .enabled(!isPrinting()).tag(7).button(BTN_POS(1,7), BTN_SIZE(2,1), GET_TEXT_F(MSG_RELEASE_XY_AXIS)) - .colors(action_btn) .tag(1).button(BTN_POS(1,8), BTN_SIZE(2,1), GET_TEXT_F(MSG_BACK)); + .colors(action_btn) .tag(1).button(BTN_POS(1,8), BTN_SIZE(2,1), GET_TEXT_F(MSG_BUTTON_DONE)); } #undef GRID_COLS #undef GRID_ROWS diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/advanced_settings_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/advanced_settings_menu.cpp index d984dbe120..7549e8d54e 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/advanced_settings_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/advanced_settings_menu.cpp @@ -67,7 +67,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { .tag(10).button(DISPLAY_POS, GET_TEXT_F(MSG_DISPLAY_MENU)) .tag(11).button(RESTORE_DEFAULTS_POS, GET_TEXT_F(MSG_RESTORE_DEFAULTS)) .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/leveling_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/leveling_menu.cpp index 57c8a7505c..d3950a7c6c 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/leveling_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/leveling_menu.cpp @@ -23,9 +23,9 @@ #include "../config.h" #include "../screens.h" -#ifdef COCOA_LEVELING_MENU +#if ENABLED(COCOA_LEVELING_MENU) -#if BOTH(HAS_BED_PROBE,BLTOUCH) +#if BOTH(HAS_BED_PROBE, BLTOUCH) #include "../../../../feature/bltouch.h" #endif @@ -71,7 +71,7 @@ void LevelingMenu::onRedraw(draw_mode_t what) { #undef GRID_COLS #define GRID_COLS 3 .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/load_chocolate.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/load_chocolate.cpp index 8c15cae60f..d40b3be354 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/load_chocolate.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/load_chocolate.cpp @@ -90,7 +90,7 @@ void LoadChocolateScreen::draw_buttons(draw_mode_t what) { cmd.tag(3).button(x, y, h, v, GET_TEXT_F(MSG_FULL_LOAD)); ui.bounds(POLY(load_screen_back_btn), x, y, h, v); - cmd.tag(1).colors(action_btn).button(x, y, h, v, GET_TEXT_F(MSG_BACK)); + cmd.tag(1).colors(action_btn).button(x, y, h, v, GET_TEXT_F(MSG_BUTTON_DONE)); } void LoadChocolateScreen::draw_text(draw_mode_t what) { diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/main_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/main_menu.cpp index a990717fb3..3fe17b72d5 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/main_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/main_menu.cpp @@ -68,7 +68,7 @@ void MainMenu::onRedraw(draw_mode_t what) { .tag(10).button(LEVELING_POS, GET_TEXT_F(MSG_LEVELING)) .tag(11).button(ABOUT_PRINTER_POS, GET_TEXT_F(MSG_INFO_MENU)) .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_menu.cpp index 56e90ceb4d..424e0afa76 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_menu.cpp @@ -65,7 +65,7 @@ void PreheatMenu::onRedraw(draw_mode_t what) { } #endif cmd.colors(action_btn) - .tag(1) .button(BTN_POS(1,5), BTN_SIZE(2,1), GET_TEXT_F(MSG_BACK)); + .tag(1) .button(BTN_POS(1,5), BTN_SIZE(2,1), GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_screen.cpp index 75b1fcc9c1..300878670e 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/cocoa_press/preheat_screen.cpp @@ -77,7 +77,7 @@ void PreheatTimerScreen::draw_interaction_buttons(draw_mode_t what) { CommandProcessor cmd; cmd.colors(normal_btn) .font(font_medium) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h index 8ae7a150f8..339b337e55 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/compat.h @@ -288,7 +288,7 @@ // Remove compiler warning on an unused variable #ifndef UNUSED - #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) + #if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) #define UNUSED(X) (void)X #else #define UNUSED(x) ((void)(x)) diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h index 8561eb05a2..9a83e9ee09 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/command_processor.h @@ -209,11 +209,25 @@ class CommandProcessor : public CLCD::CommandFifo { inline CommandProcessor& rectangle(int16_t x, int16_t y, int16_t w, int16_t h) { using namespace FTDI; CLCD::CommandFifo::cmd(BEGIN(RECTS)); - CLCD::CommandFifo::cmd(VERTEX2F(x * 16, y * 16)); + CLCD::CommandFifo::cmd(VERTEX2F( x * 16, y * 16)); CLCD::CommandFifo::cmd(VERTEX2F((x + w) * 16, (y + h) * 16)); return *this; } + inline CommandProcessor& border(int16_t x, int16_t y, int16_t w, int16_t h) { + using namespace FTDI; + CLCD::CommandFifo::cmd(BEGIN(LINES)); + CLCD::CommandFifo::cmd(VERTEX2F( x * 16, y * 16)); + CLCD::CommandFifo::cmd(VERTEX2F((x + w) * 16, y * 16)); + CLCD::CommandFifo::cmd(VERTEX2F((x + w) * 16, y * 16)); + CLCD::CommandFifo::cmd(VERTEX2F((x + w) * 16, (y + h) * 16)); + CLCD::CommandFifo::cmd(VERTEX2F((x + w) * 16, (y + h) * 16)); + CLCD::CommandFifo::cmd(VERTEX2F( x * 16, (y + h) * 16)); + CLCD::CommandFifo::cmd(VERTEX2F( x * 16, (y + h) * 16)); + CLCD::CommandFifo::cmd(VERTEX2F( x * 16, y * 16)); + return *this; + } + template FORCEDINLINE CommandProcessor& toggle(int16_t x, int16_t y, int16_t w, int16_t h, T text, bool state, uint16_t options = FTDI::OPT_3D) { CLCD::FontMetrics fm(_font); diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp index 9f73c7dfb8..f3f518359c 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/extended/text_box.cpp @@ -29,25 +29,30 @@ namespace FTDI { * be broken so that the display width is less than w. The line will also * be broken after a '\n'. Returns the display width of the line. */ - static uint16_t find_line_break(const FontMetrics &fm, uint16_t w, const char *str, const char *&end) { - w -= fm.get_char_width(' '); + static uint16_t find_line_break(const FontMetrics &utf8_fm, const CLCD::FontMetrics &clcd_fm, const uint16_t w, const char *str, const char *&end, bool use_utf8) { const char *p = str; end = str; uint16_t lw = 0, result = 0; for (;;) { - utf8_char_t c = get_utf8_char_and_inc(p); - if (c == ' ' || c == '\n' || c == '\0') { - if (lw < w || end == str) { - end = (c == '\0') ? p-1 : p; + const char *next = p; + utf8_char_t c = get_utf8_char_and_inc(next); + // Decide whether to break the string at this location + if (c == '\n' || c == '\0' || c == ' ') { + end = p; + result = lw; + } + if (c == '\n' || c == '\0') break; + // Now add the length of the current character to the tally. + lw += use_utf8 ? utf8_fm.get_char_width(c) : clcd_fm.char_widths[(uint8_t)c]; + // Stop processing once string exceeds the display width + if (lw >= w) { + if (end == str) { + end = p; result = lw; } - if (c == '\0' || c == '\n') break; + break; } - lw += fm.get_char_width(c); - } - if (end == str) { - end = p-1; - result = lw; + p = next; } return result; } @@ -55,17 +60,18 @@ namespace FTDI { /** * This function returns a measurements of the word-wrapped text box. */ - static void measure_text_box(const FontMetrics &fm, const char *str, uint16_t &width, uint16_t &height) { + static void measure_text_box(const FontMetrics &utf8_fm, const CLCD::FontMetrics &clcd_fm, const char *str, uint16_t &width, uint16_t &height, bool use_utf8) { const char *line_start = (const char*)str; const char *line_end; const uint16_t wrap_width = width; width = height = 0; for (;;) { - uint16_t line_width = find_line_break(fm, wrap_width, line_start, line_end); - if (line_end == line_start) break; + uint16_t line_width = find_line_break(utf8_fm, clcd_fm, wrap_width, line_start, line_end, use_utf8); width = max(width, line_width); - height += fm.get_height(); + height += utf8_fm.get_height(); line_start = line_end; + if (line_start[0] == '\n' || line_start[0] == ' ') line_start++; + if (line_start[0] == '\0') break; } } @@ -73,41 +79,45 @@ namespace FTDI { * This function draws text inside a bounding box, doing word wrapping and using the largest font that will fit. */ void draw_text_box(CommandProcessor& cmd, int x, int y, int w, int h, const char *str, uint16_t options, uint8_t font) { + #if ENABLED(TOUCH_UI_USE_UTF8) + const bool use_utf8 = has_utf8_chars(str); + #else + constexpr bool use_utf8 = false; + #endif uint16_t box_width, box_height; - FontMetrics fm(font); + FontMetrics utf8_fm(font); + CLCD::FontMetrics clcd_fm; + clcd_fm.load(font); // Shrink the font until we find a font that fits for (;;) { box_width = w; - measure_text_box(fm, str, box_width, box_height); + measure_text_box(utf8_fm, clcd_fm, str, box_width, box_height, use_utf8); if (box_width <= (uint16_t)w && box_height <= (uint16_t)h) break; if (font == 26) break; - fm.load(--font); + utf8_fm.load(--font); + clcd_fm.load(font); } const uint16_t dx = (options & OPT_RIGHTX) ? w : - (options & OPT_CENTERX) ? w/2 : 0; - const uint16_t dy = (options & OPT_BOTTOMY) ? (h - box_height) : - (options & OPT_CENTERY) ? (h - box_height)/2 : 0; + (options & OPT_CENTERX) ? w / 2 : 0, + dy = (options & OPT_BOTTOMY) ? (h - box_height) : + (options & OPT_CENTERY) ? (h - box_height) / 2 : 0; - const char *line_start = str; - const char *line_end; + const char *line_start = str, *line_end; for (;;) { - find_line_break(fm, w, line_start, line_end); - if (line_end == line_start) break; + find_line_break(utf8_fm, clcd_fm, w, line_start, line_end, use_utf8); const size_t line_len = line_end - line_start; if (line_len) { char line[line_len + 1]; strncpy(line, line_start, line_len); line[line_len] = 0; - if (line[line_len - 1] == '\n' || line[line_len - 1] == ' ') - line[line_len - 1] = 0; #if ENABLED(TOUCH_UI_USE_UTF8) - if (has_utf8_chars(line)) { - draw_utf8_text(cmd, x + dx, y + dy, line, fm.fs, options & ~(OPT_CENTERY | OPT_BOTTOMY)); + if (use_utf8) { + draw_utf8_text(cmd, x + dx, y + dy, line, utf8_fm.fs, options & ~(OPT_CENTERY | OPT_BOTTOMY)); } else #endif { @@ -115,9 +125,11 @@ namespace FTDI { cmd.CLCD::CommandFifo::str(line); } } - y += fm.get_height(); + y += utf8_fm.get_height(); line_start = line_end; + if (line_start[0] == '\n' || line_start[0] == ' ') line_start++; + if (line_start[0] == '\0') break; } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/file2cpp.py b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/file2cpp.py index 25919c3c4d..6aa8947b98 100755 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/file2cpp.py +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/file2cpp.py @@ -31,7 +31,7 @@ if __name__ == "__main__": args = parser.parse_args() varname = os.path.splitext(os.path.basename(args.input))[0]; - + with open(args.input, "rb") as in_file: data = in_file.read() if args.deflate: diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/img2cpp.py b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/img2cpp.py index 5908f5bf17..74be574300 100755 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/img2cpp.py +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/ftdi_eve_lib/scripts/img2cpp.py @@ -29,13 +29,13 @@ class WriteSource: self.mode = mode self.offset = 8 self.byte = 0 - + def finish_byte(self): if self.offset != 8: self.values.append(self.byte) self.offset = 8 self.byte = 0 - + def add_bits_to_byte(self, value, size = 1): self.offset -= size self.byte = self.byte | value << self.offset diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/about_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/about_screen.cpp index 4e90e71e8a..3e07735edf 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/about_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/about_screen.cpp @@ -44,16 +44,13 @@ void AboutScreen::onRedraw(draw_mode_t) { .cmd(COLOR_RGB(bg_text_enabled)) .tag(0); - #define HEADING_POS BTN_POS(1,2), BTN_SIZE(4,1) + #define HEADING_POS BTN_POS(1,1), BTN_SIZE(4,2) #define FW_VERS_POS BTN_POS(1,3), BTN_SIZE(4,1) #define FW_INFO_POS BTN_POS(1,4), BTN_SIZE(4,1) #define LICENSE_POS BTN_POS(1,5), BTN_SIZE(4,3) #define STATS_POS BTN_POS(1,8), BTN_SIZE(2,1) #define BACK_POS BTN_POS(3,8), BTN_SIZE(2,1) - #define _INSET_POS(x,y,w,h) x + w/10, y, w - w/5, h - #define INSET_POS(pos) _INSET_POS(pos) - char about_str[1 + strlen_P(GET_TEXT(MSG_ABOUT_TOUCH_PANEL_2)) #ifdef TOOLHEAD_NAME @@ -89,7 +86,7 @@ void AboutScreen::onRedraw(draw_mode_t) { , OPT_CENTER, font_medium); cmd.tag(0); draw_text_box(cmd, FW_INFO_POS, about_str, OPT_CENTER, font_medium); - draw_text_box(cmd, INSET_POS(LICENSE_POS), GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny); + draw_text_box(cmd, LICENSE_POS, GET_TEXT_F(MSG_LICENSE), OPT_CENTER, font_tiny); cmd.font(font_medium); #if ENABLED(PRINTCOUNTER) && defined(FTDI_STATISTICS_SCREEN) @@ -97,7 +94,7 @@ void AboutScreen::onRedraw(draw_mode_t) { .tag(2).button(STATS_POS, GET_TEXT_F(MSG_INFO_STATS_MENU)); #endif cmd.colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } bool AboutScreen::onTouchEnd(uint8_t tag) { diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/advanced_settings_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/advanced_settings_menu.cpp index 58a7112d01..a83cc07515 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/advanced_settings_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/advanced_settings_menu.cpp @@ -111,7 +111,7 @@ void AdvancedSettingsMenu::onRedraw(draw_mode_t what) { .enabled(ENABLED(BACKLASH_GCODE)) .tag(8).button(BACKLASH_POS, GET_TEXT_F(MSG_BACKLASH)) .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } @@ -122,7 +122,7 @@ bool AdvancedSettingsMenu::onTouchEnd(uint8_t tag) { case 2: GOTO_SCREEN(ZOffsetScreen); break; #endif case 3: GOTO_SCREEN(StepsScreen); break; - #if ENABLED(HAS_MULTI_HOTEND) + #if HAS_MULTI_HOTEND case 4: GOTO_SCREEN(NozzleOffsetScreen); break; #endif case 5: GOTO_SCREEN(MaxVelocityScreen); break; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/base_numeric_adjustment_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/base_numeric_adjustment_screen.cpp index 90199783fd..d0ba74721c 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/base_numeric_adjustment_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/base_numeric_adjustment_screen.cpp @@ -61,7 +61,7 @@ BaseNumericAdjustmentScreen::widgets_t::widgets_t(draw_mode_t what) : _what(what #else BTN_POS(15,7), BTN_SIZE(4,1), #endif - GET_TEXT_F(MSG_BACK), true, true + GET_TEXT_F(MSG_BUTTON_DONE), true, true ); _line = 1; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/bed_mesh_edit_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/bed_mesh_edit_screen.cpp index 3dfcd429a5..30b9d1c78a 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/bed_mesh_edit_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/bed_mesh_edit_screen.cpp @@ -136,7 +136,7 @@ void BedMeshEditScreen::drawHighlightedPointValue() { if (mydata.highlight.x != NONE) draw_adjuster(cmd, Z_VALUE_POS, 3, getHighlightedValue(), GET_TEXT_F(MSG_UNITS_MM), 4, 3); cmd.colors(mydata.needSave ? normal_btn : action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_BACK)) + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)) .colors(mydata.needSave ? action_btn : normal_btn) .enabled(mydata.needSave) .tag(2).button(SAVE_POS, GET_TEXT_F(MSG_TOUCHMI_SAVE)); diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp index 46d3a4ea1c..fa0748c17b 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/change_filament_screen.cpp @@ -224,7 +224,7 @@ void ChangeFilamentScreen::onRedraw(draw_mode_t what) { .tag(6) .enabled(t_ok).button (LOAD_MOMN_POS, GET_TEXT_F(MSG_MOMENTARY)) .tag(7).TOG_STYLE(tog7).enabled(t_ok).button (UNLD_CONT_POS, GET_TEXT_F(MSG_CONTINUOUS)) .tag(8).TOG_STYLE(tog8).enabled(t_ok).button (LOAD_CONT_POS, GET_TEXT_F(MSG_CONTINUOUS)) - .tag(1).colors(action_btn) .button (BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).colors(action_btn) .button (BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.cpp index 5f8ff92922..8807480897 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/custom_user_menus.cpp @@ -135,7 +135,7 @@ void CustomUserMenus::onRedraw(draw_mode_t what) { _USER_ITEM(20) #endif .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/endstop_state_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/endstop_state_screen.cpp index d12cb32e20..c7042e760e 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/endstop_state_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/endstop_state_screen.cpp @@ -120,7 +120,7 @@ void EndstopStatesScreen::onRedraw(draw_mode_t) { cmd.font(font_medium) .colors(action_btn) - .tag(1).button(BTN_POS(1,7), BTN_SIZE(6,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button(BTN_POS(1,7), BTN_SIZE(6,1), GET_TEXT_F(MSG_BUTTON_DONE)); #undef GRID_COLS #undef GRID_ROWS } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/filament_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/filament_menu.cpp index bd5fa96e8d..9c9e70cebf 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/filament_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/filament_menu.cpp @@ -63,7 +63,7 @@ void FilamentMenu::onRedraw(draw_mode_t what) { .enabled(ENABLED(LIN_ADVANCE)) .tag(3).button(LIN_ADVANCE_POS, GET_TEXT_F(MSG_LINEAR_ADVANCE)) .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp index bf32502594..aa54e88967 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/files_screen.cpp @@ -168,7 +168,7 @@ void FilesScreen::drawFooter() { cmd.colors(normal_btn) .font(font_medium) .colors(has_selection ? normal_btn : action_btn) - .tag(back_tag).button(BTN_POS(4,y), BTN_SIZE(3,h), GET_TEXT_F(MSG_BACK)) + .tag(back_tag).button(BTN_POS(4,y), BTN_SIZE(3,h), GET_TEXT_F(MSG_BUTTON_DONE)) .enabled(has_selection) .colors(has_selection ? action_btn : normal_btn); diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_settings_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_settings_screen.cpp index 568da53524..ebefea2dcd 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_settings_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_settings_screen.cpp @@ -58,11 +58,7 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { if (what & BACKGROUND) { #define GRID_COLS 4 - #if ENABLED(TOUCH_UI_PORTRAIT) - #define GRID_ROWS 7 - #else - #define GRID_ROWS 6 - #endif + #define GRID_ROWS TERN(TOUCH_UI_PORTRAIT, 7, 6) cmd.cmd(CLEAR_COLOR_RGB(bg_color)) .cmd(CLEAR(true,true,true)) @@ -77,21 +73,19 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { #if DISABLED(LCD_FYSETC_TFT81050) .text(BTN_POS(1,2), BTN_SIZE(2,1), GET_TEXT_F(MSG_LCD_BRIGHTNESS), OPT_RIGHTX | OPT_CENTERY) #endif - .text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY) - .text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY); + .text(BTN_POS(1,3), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUND_VOLUME), OPT_RIGHTX | OPT_CENTERY); + #if ENABLED(FTDI_LOCK_SCREEN) + cmd.text(BTN_POS(1,4), BTN_SIZE(2,1), GET_TEXT_F(MSG_SCREEN_LOCK), OPT_RIGHTX | OPT_CENTERY); + #endif #if DISABLED(TOUCH_UI_NO_BOOTSCREEN) - cmd.text(BTN_POS(1,5), BTN_SIZE(2,1), GET_TEXT_F(MSG_BOOT_SCREEN), OPT_RIGHTX | OPT_CENTERY); + cmd.text(BTN_POS(1,5), BTN_SIZE(2,1), GET_TEXT_F(MSG_BOOT_SCREEN), OPT_RIGHTX | OPT_CENTERY); #endif #undef EDGE_R } if (what & FOREGROUND) { - #if defined(FTDI_LOCK_SCREEN) || DISABLED(TOUCH_UI_NO_BOOTSCREEN) - #if ENABLED(TOUCH_UI_PORTRAIT) - constexpr uint8_t w = 2; - #else - constexpr uint8_t w = 1; - #endif + #if ENABLED(FTDI_LOCK_SCREEN) || DISABLED(TOUCH_UI_NO_BOOTSCREEN) + constexpr uint8_t w = TERN(TOUCH_UI_PORTRAIT, 2, 1); #endif cmd.font(font_medium) @@ -101,7 +95,7 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { .tag(2).slider(BTN_POS(3,2), BTN_SIZE(2,1), mydata.brightness, 128) #endif .tag(3).slider(BTN_POS(3,3), BTN_SIZE(2,1), mydata.volume, 0xFF) - #ifdef FTDI_LOCK_SCREEN + #if ENABLED(FTDI_LOCK_SCREEN) .colors(ui_toggle) .tag(4).toggle2(BTN_POS(3,4), BTN_SIZE(w,1), GET_TEXT_F(MSG_NO), GET_TEXT_F(MSG_YES), LockScreen::is_enabled()) #endif @@ -114,11 +108,11 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { .colors(normal_btn) .tag(6).button (BTN_POS(1,6), BTN_SIZE(4,1), GET_TEXT_F(MSG_SOUNDS)) .colors(action_btn) - .tag(1).button (BTN_POS(1,7), BTN_SIZE(4,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button (BTN_POS(1,7), BTN_SIZE(4,1), GET_TEXT_F(MSG_BUTTON_DONE)); #else .tag(6).button (BTN_POS(1,6), BTN_SIZE(2,1), GET_TEXT_F(MSG_SOUNDS)) .colors(action_btn) - .tag(1).button (BTN_POS(3,6), BTN_SIZE(2,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button (BTN_POS(3,6), BTN_SIZE(2,1), GET_TEXT_F(MSG_BUTTON_DONE)); #endif } } @@ -126,7 +120,7 @@ void InterfaceSettingsScreen::onRedraw(draw_mode_t what) { bool InterfaceSettingsScreen::onTouchEnd(uint8_t tag) { switch (tag) { case 1: GOTO_PREVIOUS(); return true; - #ifdef FTDI_LOCK_SCREEN + #if ENABLED(FTDI_LOCK_SCREEN) case 4: if (!LockScreen::is_enabled()) LockScreen::enable(); @@ -185,8 +179,7 @@ void InterfaceSettingsScreen::onIdle() { } void InterfaceSettingsScreen::failSafeSettings() { - // Reset settings that may make the printer interface - // unusable. + // Reset settings that may make the printer interface unusable. CLCD::mem_write_32(CLCD::REG::ROTATE, 0); CLCD::default_touch_transform(); CLCD::default_display_orientation(); @@ -197,9 +190,7 @@ void InterfaceSettingsScreen::failSafeSettings() { } void InterfaceSettingsScreen::defaultSettings() { - #ifdef FTDI_LOCK_SCREEN - LockScreen::passcode = 0; - #endif + TERN_(FTDI_LOCK_SCREEN, LockScreen::passcode = 0); SoundPlayer::set_volume(255); CLCD::set_brightness(255); UIData::reset_persistent_data(); @@ -218,11 +209,7 @@ void InterfaceSettingsScreen::saveSettings(char *buff) { persistent_data_t eeprom; - #ifdef FTDI_LOCK_SCREEN - eeprom.passcode = LockScreen::passcode; - #else - eeprom.passcode = 0; - #endif + eeprom.passcode = TERN0(FTDI_LOCK_SCREEN, LockScreen::passcode); eeprom.sound_volume = SoundPlayer::get_volume(); eeprom.display_brightness = CLCD::get_brightness(); eeprom.bit_flags = UIData::get_persistent_data(); @@ -251,7 +238,7 @@ void InterfaceSettingsScreen::loadSettings(const char *buff) { SERIAL_ECHOLNPGM("Loading setting from EEPROM"); - #ifdef FTDI_LOCK_SCREEN + #if ENABLED(FTDI_LOCK_SCREEN) LockScreen::passcode = eeprom.passcode; #endif SoundPlayer::set_volume(eeprom.sound_volume); @@ -282,10 +269,7 @@ void InterfaceSettingsScreen::loadSettings(const char *buff) { if (success) success = persistentStore.write_data(0, data, ARCHIM2_SPI_FLASH_EEPROM_BACKUP_SIZE) == PERSISTENT_STORE_SUCCESS; - if (success) - StatusScreen::setStatusMessage(GET_TEXT_F(MSG_EEPROM_RESTORED)); - else - StatusScreen::setStatusMessage(GET_TEXT_F(MSG_EEPROM_RESET)); + StatusScreen::setStatusMessage(success ? GET_TEXT_F(MSG_EEPROM_RESTORED) : GET_TEXT_F(MSG_EEPROM_RESET)); return success; } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_sounds_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_sounds_screen.cpp index 3ba035f19b..b951844196 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_sounds_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/interface_sounds_screen.cpp @@ -102,7 +102,7 @@ void InterfaceSoundsScreen::onRedraw(draw_mode_t what) { .tag(5).button (BTN_POS(3,6), BTN_SIZE(2,1), getSoundSelection(PRINTING_FINISHED)) .tag(6).button (BTN_POS(3,7), BTN_SIZE(2,1), getSoundSelection(PRINTING_FAILED)) .colors(action_btn) - .tag(1).button (BTN_POS(1,9), BTN_SIZE(4,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button (BTN_POS(1,9), BTN_SIZE(4,1), GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/leveling_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/leveling_menu.cpp index 797bb37996..e693bfb05c 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/leveling_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/leveling_menu.cpp @@ -96,7 +96,7 @@ void LevelingMenu::onRedraw(draw_mode_t what) { .tag(8).button(BLTOUCH_TEST_POS, GET_TEXT_F(MSG_BLTOUCH_SELFTEST)) #endif .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } @@ -106,7 +106,7 @@ bool LevelingMenu::onTouchEnd(uint8_t tag) { #if EITHER(Z_STEPPER_AUTO_ALIGN,MECHANICAL_GANTRY_CALIBRATION) case 2: SpinnerDialogBox::enqueueAndWait_P(F("G34")); break; #endif - #if ENABLED(HAS_BED_PROBE) + #if HAS_BED_PROBE case 3: #ifndef BED_LEVELING_COMMANDS #define BED_LEVELING_COMMANDS "G29" diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/main_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/main_menu.cpp index f7a0d6683a..3f614ec344 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/main_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/main_menu.cpp @@ -95,7 +95,7 @@ void MainMenu::onRedraw(draw_mode_t what) { .tag(11).button(CUSTOM_MENU_POS, GET_TEXT_F(MSG_CUSTOM_COMMANDS)) #endif .colors(action_btn) - .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .tag(1).button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.cpp index 176630d11e..5d92052ace 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.cpp @@ -60,4 +60,8 @@ void SaveSettingsDialogBox::promptToSaveSettings() { GOTO_PREVIOUS(); // No save needed. } +void SaveSettingsDialogBox::promptToSaveAndStay() { + if (needs_save) GOTO_SCREEN(SaveSettingsDialogBox); +} + #endif // FTDI_SAVE_SETTINGS_DIALOG_BOX diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.h index 8985a974fe..0cbadfbbe6 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/save_settings_dialog_box.h @@ -34,5 +34,6 @@ class SaveSettingsDialogBox : public DialogBoxBaseClass, public UncachedScreen { static bool onTouchEnd(uint8_t tag); static void promptToSaveSettings(); + static void promptToSaveAndStay(); static void settingsChanged() {needs_save = true;} }; diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/statistics_screen.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/statistics_screen.cpp index 2153a1e1ad..b6d9770e9d 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/statistics_screen.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/statistics_screen.cpp @@ -63,7 +63,7 @@ void StatisticsScreen::onRedraw(draw_mode_t what) { if (what & FOREGROUND) { cmd.font(Theme::font_medium) .colors(action_btn) - .tag(1).button(BTN_POS(1,7), BTN_SIZE(4,1), GET_TEXT_F(MSG_BACK)); + .tag(1).button(BTN_POS(1,7), BTN_SIZE(4,1), GET_TEXT_F(MSG_BUTTON_DONE)); } } diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/tune_menu.cpp b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/tune_menu.cpp index a5e2460631..6f4beb6673 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/tune_menu.cpp +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/generic/tune_menu.cpp @@ -92,7 +92,7 @@ void TuneMenu::onRedraw(draw_mode_t what) { .tag(10).button(CASE_LIGHT_POS, GET_TEXT_F(MSG_CASE_LIGHT)) .tag(11).button(ADVANCED_SETTINGS_POS, GET_TEXT_F(MSG_ADVANCED_SETTINGS)) .tag(1).colors(action_btn) - .button(BACK_POS, GET_TEXT_F(MSG_BACK)); + .button(BACK_POS, GET_TEXT_F(MSG_BUTTON_DONE)); } #undef GRID_COLS #undef GRID_ROWS diff --git a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/fonts.h b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/fonts.h index 7cc4e078ad..63ecdfcb3c 100644 --- a/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/fonts.h +++ b/Marlin/src/lcd/extui/ftdi_eve_touch_ui/theme/fonts.h @@ -55,7 +55,7 @@ namespace Theme { constexpr int16_t font_small = 27; constexpr int16_t font_medium = 28; constexpr int16_t font_large = 30; - constexpr int16_t font_xlarge = 31; + constexpr int16_t font_xlarge = 30; constexpr float icon_scale = 0.6; #endif #elif defined(TOUCH_UI_320x240) diff --git a/Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp b/Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp index 6d207b86a7..3f2cd32c73 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_dialog.cpp @@ -61,7 +61,7 @@ static lv_obj_t *scr, *tempText1, *filament_bar; extern uint8_t sel_id; extern bool once_flag, gcode_preview_over; extern int upload_result; -extern uint32_t upload_time; +extern uint32_t upload_time_sec; extern uint32_t upload_size; extern bool temps_update_flag; @@ -406,28 +406,24 @@ void lv_draw_dialog(uint8_t type) { char buf[200]; int _index = 0; - strcpy(buf, DIALOG_UPLOAD_FINISH_EN); + strcpy_P(buf, PSTR(DIALOG_UPLOAD_FINISH_EN)); _index = strlen(buf); - buf[_index] = '\n'; - _index++; - strcat(buf, DIALOG_UPLOAD_SIZE_EN); + buf[_index++] = '\n'; + strcat_P(buf, PSTR(DIALOG_UPLOAD_SIZE_EN)); _index = strlen(buf); - buf[_index] = ':'; - _index++; - sprintf(&buf[_index], " %d KBytes\n", (int)(upload_size / 1024)); + buf[_index++] = ':'; + sprintf_P(&buf[_index], PSTR(" %d KBytes\n"), (int)(upload_size / 1024)); - strcat(buf, DIALOG_UPLOAD_TIME_EN); + strcat_P(buf, PSTR(DIALOG_UPLOAD_TIME_EN)); _index = strlen(buf); - buf[_index] = ':'; - _index++; - sprintf(&buf[_index], " %d s\n", (int)upload_time); + buf[_index++] = ':'; + sprintf_P(&buf[_index], PSTR(" %d s\n"), (int)upload_time_sec); - strcat(buf, DIALOG_UPLOAD_SPEED_EN); + strcat_P(buf, PSTR(DIALOG_UPLOAD_SPEED_EN)); _index = strlen(buf); - buf[_index] = ':'; - _index++; - sprintf(&buf[_index], " %d KBytes/s\n", (int)(upload_size / upload_time / 1024)); + buf[_index++] = ':'; + sprintf_P(&buf[_index], PSTR(" %d KBytes/s\n"), (int)(upload_size / upload_time_sec / 1024)); lv_label_set_text(labelDialog, buf); lv_obj_align(labelDialog, nullptr, LV_ALIGN_CENTER, 0, -20); diff --git a/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp b/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp index 3297b9da27..48ff56253b 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_error_message.cpp @@ -25,12 +25,10 @@ #include "draw_ui.h" #include - #include "tft_lvgl_configuration.h" - #include "SPI_TFT.h" -#include "mks_hardware_test.h" #include "../../../inc/MarlinConfig.h" +#include "mks_hardware.h" static lv_obj_t *scr; diff --git a/Marlin/src/lcd/extui/mks_ui/draw_media_select.cpp b/Marlin/src/lcd/extui/mks_ui/draw_media_select.cpp index 0394ed6009..81c82dc02d 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_media_select.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_media_select.cpp @@ -39,7 +39,7 @@ enum { }; #if ENABLED(MKS_TEST) - extern uint8_t curent_disp_ui; + extern uint8_t current_disp_ui; #endif static void event_handler(lv_obj_t *obj, lv_event_t event) { @@ -49,7 +49,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) { case ID_T_USB_DISK: card.changeMedia(&card.media_driver_usbFlash); break; case ID_T_SD_DISK: card.changeMedia(&card.media_driver_sdcard); break; case ID_T_RETURN: - TERN_(MKS_TEST, curent_disp_ui = 1); + TERN_(MKS_TEST, current_disp_ui = 1); lv_draw_ready_print(); return; } diff --git a/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp b/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp index c9172d5887..e3915adeb0 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_printing.cpp @@ -47,14 +47,16 @@ static lv_obj_t *scr; static lv_obj_t *labelExt1, *labelFan, *labelZpos, *labelTime; static lv_obj_t *labelPause, *labelStop, *labelOperat; static lv_obj_t *bar1, *bar1ValueText; -static lv_obj_t *buttonPause, *buttonOperat, *buttonStop, *buttonExt1, *buttonExt2, *buttonBedstate, *buttonFanstate, *buttonZpos; +static lv_obj_t *buttonPause, *buttonOperat, *buttonStop, *buttonExt1, *buttonFanstate, *buttonZpos; -#if ENABLED(HAS_MULTI_EXTRUDER) +#if HAS_MULTI_EXTRUDER static lv_obj_t *labelExt2; + static lv_obj_t *buttonExt2; #endif #if HAS_HEATED_BED static lv_obj_t* labelBed; + static lv_obj_t* buttonBedstate; #endif enum { diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp index 18f125b57d..d324d8d7be 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ready_print.cpp @@ -27,7 +27,6 @@ #include "draw_tool.h" #include #include "tft_lvgl_configuration.h" -#include "mks_hardware_test.h" #include "draw_ui.h" #include @@ -40,6 +39,7 @@ #include "draw_touch_calibration.h" #endif +#include "mks_hardware.h" #include #define ICON_POS_Y 38 @@ -48,18 +48,20 @@ extern lv_group_t* g; static lv_obj_t *scr; -static lv_obj_t *labelExt1, *labelExt1Target, *labelFan; +static lv_obj_t *buttonExt1, *labelExt1, *buttonFanstate, *labelFan; -#if HAS_MULTI_EXTRUDER - static lv_obj_t *labelExt2, *labelExt2Target; +#if HAS_MULTI_HOTEND + static lv_obj_t *labelExt2; + static lv_obj_t *buttonExt2; #endif #if HAS_HEATED_BED - static lv_obj_t *labelBed, *labelBedTarget; + static lv_obj_t* labelBed; + static lv_obj_t* buttonBedstate; #endif #if ENABLED(MKS_TEST) - uint8_t curent_disp_ui = 0; + uint8_t current_disp_ui = 0; #endif enum { ID_TOOL = 1, ID_SET, ID_PRINT, ID_INFO_EXT, ID_INFO_BED, ID_INFO_FAN }; @@ -104,8 +106,10 @@ void disp_det_error() { lv_obj_t *e1, *e2, *e3, *bed; void mks_disp_test() { char buf[30] = {0}; - sprintf_P(buf, PSTR("e1:%d"), thermalManager.wholeDegHotend(0)); - lv_label_set_text(e1, buf); + #if HAS_HOTEND + sprintf_P(buf, PSTR("e1:%d"), thermalManager.wholeDegHotend(0)); + lv_label_set_text(e1, buf); + #endif #if HAS_MULTI_HOTEND sprintf_P(buf, PSTR("e2:%d"), thermalManager.wholeDegHotend(1)); lv_label_set_text(e2, buf); @@ -136,18 +140,18 @@ void lv_draw_ready_print() { lv_obj_align(label_tool, buttonTool, LV_ALIGN_IN_BOTTOM_MID, 0, BUTTON_TEXT_Y_OFFSET); } - e1 = lv_label_create_empty(scr); - lv_obj_set_pos(e1, 20, 20); - sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(0)); - lv_label_set_text(e1, buf); - + #if HAS_HOTEND + e1 = lv_label_create_empty(scr); + lv_obj_set_pos(e1, 20, 20); + sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(0)); + lv_label_set_text(e1, buf); + #endif #if HAS_MULTI_HOTEND e2 = lv_label_create_empty(scr); lv_obj_set_pos(e2, 20, 45); - sprintf_P(buf, PSTR("e1: %d"), thermalManager.wholeDegHotend(1)); + sprintf_P(buf, PSTR("e2: %d"), thermalManager.wholeDegHotend(1)); lv_label_set_text(e2, buf); #endif - #if HAS_HEATED_BED bed = lv_label_create_empty(scr); lv_obj_set_pos(bed, 20, 95); @@ -178,72 +182,27 @@ void lv_draw_ready_print() { lv_label_set_text(det_info, " "); } else { - lv_big_button_create(scr, "F:/bmp_tool.bin", main_menu.tool, 20, 180, event_handler, ID_TOOL); - lv_big_button_create(scr, "F:/bmp_set.bin", main_menu.set, 180, 180, event_handler, ID_SET); - lv_big_button_create(scr, "F:/bmp_printing.bin", main_menu.print, 340, 180, event_handler, ID_PRINT); + lv_big_button_create(scr, "F:/bmp_tool.bin", main_menu.tool, 20, 150, event_handler, ID_TOOL); + lv_big_button_create(scr, "F:/bmp_set.bin", main_menu.set, 180, 150, event_handler, ID_SET); + lv_big_button_create(scr, "F:/bmp_printing.bin", main_menu.print, 340, 150, event_handler, ID_PRINT); // Monitoring - lv_obj_t *buttonExt1 = lv_big_button_create(scr, "F:/bmp_ext1_state.bin", " ", 55, ICON_POS_Y, event_handler, ID_INFO_EXT); - #if HAS_MULTI_EXTRUDER - lv_obj_t *buttonExt2 = lv_big_button_create(scr, "F:/bmp_ext2_state.bin", " ", 163, ICON_POS_Y, event_handler, ID_INFO_EXT); - #if HAS_HEATED_BED - lv_obj_t *buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", 271, ICON_POS_Y, event_handler, ID_INFO_BED); - #endif - #else - #if HAS_HEATED_BED - lv_obj_t *buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", 210, ICON_POS_Y, event_handler, ID_INFO_BED); - #endif + #if HAS_HOTEND + buttonExt1 = lv_big_button_create(scr, "F:/bmp_ext1_state.bin", " ", 55, ICON_POS_Y, event_handler, ID_INFO_EXT); #endif - - lv_obj_t *buttonFanstate = lv_big_button_create(scr, "F:/bmp_fan_state.bin", " ", 380, ICON_POS_Y, event_handler, ID_INFO_FAN); - - labelExt1 = lv_label_create(scr, 55, LABEL_MOD_Y, nullptr); - labelExt1Target = lv_label_create(scr, 55, LABEL_MOD_Y, nullptr); - - #if HAS_MULTI_EXTRUDER - labelExt2 = lv_label_create(scr, 163, LABEL_MOD_Y, nullptr); - labelExt2Target = lv_label_create(scr, 163, LABEL_MOD_Y, nullptr); - #if HAS_HEATED_BED - labelBed = lv_label_create(scr, 271, LABEL_MOD_Y, nullptr); - labelBedTarget = lv_label_create(scr, 271, LABEL_MOD_Y, nullptr); - #endif - #else - #if HAS_HEATED_BED - labelBed = lv_label_create(scr, 210, LABEL_MOD_Y, nullptr); - labelBedTarget = lv_label_create(scr, 210, LABEL_MOD_Y, nullptr); - #endif + #if HAS_MULTI_HOTEND + buttonExt2 = lv_big_button_create(scr, "F:/bmp_ext2_state.bin", " ", 163, ICON_POS_Y, event_handler, ID_INFO_EXT); #endif - - labelFan = lv_label_create(scr, 380, 80, nullptr); - - itoa(thermalManager.degHotend(0), buf, 10); - lv_label_set_text(labelExt1, buf); - lv_obj_align(labelExt1, buttonExt1, LV_ALIGN_CENTER, 0, LABEL_MOD_Y); - sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(0)); - lv_label_set_text(labelExt1Target, buf); - lv_obj_align(labelExt1Target, buttonExt1, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y); - - #if HAS_MULTI_EXTRUDER - itoa(thermalManager.degHotend(1), buf, 10); - lv_label_set_text(labelExt2, buf); - lv_obj_align(labelExt2, buttonExt2, LV_ALIGN_CENTER, 0, LABEL_MOD_Y); - sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetHotend(1)); - lv_label_set_text(labelExt2Target, buf); - lv_obj_align(labelExt2Target, buttonExt2, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y); - #endif - #if HAS_HEATED_BED - itoa(thermalManager.degBed(), buf, 10); - lv_label_set_text(labelBed, buf); - lv_obj_align(labelBed, buttonBedstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y); - sprintf_P(buf, PSTR("-> %d"), thermalManager.degTargetBed()); - lv_label_set_text(labelBedTarget, buf); - lv_obj_align(labelBedTarget, buttonBedstate, LV_ALIGN_CENTER, 0, TARGET_LABEL_MOD_Y); + buttonBedstate = lv_big_button_create(scr, "F:/bmp_bed_state.bin", " ", TERN(HAS_MULTI_HOTEND, 271, 210), ICON_POS_Y, event_handler, ID_INFO_BED); #endif - sprintf_P(buf, PSTR("%d%%"), (int)thermalManager.fanSpeedPercent(0)); - lv_label_set_text(labelFan, buf); - lv_obj_align(labelFan, buttonFanstate, LV_ALIGN_CENTER, 0, LABEL_MOD_Y); + TERN_(HAS_HOTEND, labelExt1 = lv_label_create_empty(scr)); + TERN_(HAS_MULTI_HOTEND, labelExt2 = lv_label_create_empty(scr)); + TERN_(HAS_HEATED_BED, labelBed = lv_label_create_empty(scr)); + TERN_(HAS_FAN, labelFan = lv_label_create_empty(scr)); + + lv_temp_refr(); } #if ENABLED(TOUCH_SCREEN_CALIBRATION) @@ -256,17 +215,25 @@ void lv_draw_ready_print() { } void lv_temp_refr() { + #if HAS_HOTEND + sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0)); + lv_label_set_text(labelExt1, public_buf_l); + lv_obj_align(labelExt1, buttonExt1, LV_ALIGN_OUT_BOTTOM_MID, 0, 0); + #endif + #if HAS_MULTI_HOTEND + sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1)); + lv_label_set_text(labelExt2, public_buf_l); + lv_obj_align(labelExt2, buttonExt2, LV_ALIGN_OUT_BOTTOM_MID, 0, 0); + #endif #if HAS_HEATED_BED sprintf(public_buf_l, printing_menu.bed_temp, thermalManager.wholeDegBed(), thermalManager.degTargetBed()); lv_label_set_text(labelBed, public_buf_l); + lv_obj_align(labelBed, buttonBedstate, LV_ALIGN_OUT_BOTTOM_MID, 0, 0); #endif - - sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0)); - lv_label_set_text(labelExt1, public_buf_l); - - #if HAS_MULTI_EXTRUDER - sprintf(public_buf_l, printing_menu.temp1, thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1)); - lv_label_set_text(labelExt2, public_buf_l); + #if HAS_FAN + sprintf_P(public_buf_l, PSTR("%d%%"), (int)thermalManager.fanSpeedPercent(0)); + lv_label_set_text(labelFan, public_buf_l); + lv_obj_align(labelFan, buttonFanstate, LV_ALIGN_OUT_BOTTOM_MID, 0, 0); #endif } diff --git a/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp b/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp index 16c1448b3c..8b9747972d 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_tool.cpp @@ -45,7 +45,7 @@ enum { }; #if ENABLED(MKS_TEST) - extern uint8_t curent_disp_ui; + extern uint8_t current_disp_ui; #endif static void event_handler(lv_obj_t *obj, lv_event_t event) { @@ -75,7 +75,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) { lv_draw_more(); break; case ID_T_RETURN: - TERN_(MKS_TEST, curent_disp_ui = 1); + TERN_(MKS_TEST, current_disp_ui = 1); lv_draw_ready_print(); break; } diff --git a/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp b/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp index a4470a4c87..e10a07c6de 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_touch_calibration.cpp @@ -34,6 +34,10 @@ static lv_obj_t *scr; static lv_obj_t *status_label; +#if ENABLED(MKS_TEST) + extern uint8_t current_disp_ui; +#endif + static void event_handler(lv_obj_t *obj, lv_event_t event); enum { @@ -93,7 +97,7 @@ static void event_handler(lv_obj_t *obj, lv_event_t event) { if (event != LV_EVENT_RELEASED) return; switch (obj->mks_obj_id) { case ID_TC_RETURN: - TERN_(MKS_TEST, curent_disp_ui = 1); + TERN_(MKS_TEST, current_disp_ui = 1); lv_clear_touch_calibration_screen(); draw_return_ui(); break; diff --git a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp index 727120c183..1c1e5cc1f5 100644 --- a/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp +++ b/Marlin/src/lcd/extui/mks_ui/draw_ui.cpp @@ -30,7 +30,6 @@ #include "pic_manager.h" #include "draw_ui.h" -#include "mks_hardware_test.h" #include @@ -52,6 +51,10 @@ #include "draw_touch_calibration.h" #endif +#if ENABLED(MKS_TEST) + #include "mks_hardware.h" +#endif + CFG_ITMES gCfgItems; UI_CFG uiCfg; DISP_STATE_STACK disp_state_stack; @@ -202,27 +205,27 @@ void ui_cfg_init() { #if ENABLED(MKS_WIFI_MODULE) memset(&wifiPara, 0, sizeof(wifiPara)); memset(&ipPara, 0, sizeof(ipPara)); - strcpy(wifiPara.ap_name, WIFI_AP_NAME); - strcpy(wifiPara.keyCode, WIFI_KEY_CODE); + strcpy_P(wifiPara.ap_name, PSTR(WIFI_AP_NAME)); + strcpy_P(wifiPara.keyCode, PSTR(WIFI_KEY_CODE)); //client - strcpy(ipPara.ip_addr, IP_ADDR); - strcpy(ipPara.mask, IP_MASK); - strcpy(ipPara.gate, IP_GATE); - strcpy(ipPara.dns, IP_DNS); + strcpy_P(ipPara.ip_addr, PSTR(IP_ADDR)); + strcpy_P(ipPara.mask, PSTR(IP_MASK)); + strcpy_P(ipPara.gate, PSTR(IP_GATE)); + strcpy_P(ipPara.dns, PSTR(IP_DNS)); ipPara.dhcp_flag = IP_DHCP_FLAG; //AP - strcpy(ipPara.dhcpd_ip, AP_IP_ADDR); - strcpy(ipPara.dhcpd_mask, AP_IP_MASK); - strcpy(ipPara.dhcpd_gate, AP_IP_GATE); - strcpy(ipPara.dhcpd_dns, AP_IP_DNS); - strcpy(ipPara.start_ip_addr, IP_START_IP); - strcpy(ipPara.end_ip_addr, IP_END_IP); + strcpy_P(ipPara.dhcpd_ip, PSTR(AP_IP_ADDR)); + strcpy_P(ipPara.dhcpd_mask, PSTR(AP_IP_MASK)); + strcpy_P(ipPara.dhcpd_gate, PSTR(AP_IP_GATE)); + strcpy_P(ipPara.dhcpd_dns, PSTR(AP_IP_DNS)); + strcpy_P(ipPara.start_ip_addr, PSTR(IP_START_IP)); + strcpy_P(ipPara.end_ip_addr, PSTR(IP_END_IP)); ipPara.dhcpd_flag = AP_IP_DHCP_FLAG; - strcpy((char*)uiCfg.cloud_hostUrl, "baizhongyun.cn"); + strcpy_P((char*)uiCfg.cloud_hostUrl, PSTR("baizhongyun.cn")); uiCfg.cloud_port = 10086; #endif @@ -1362,7 +1365,10 @@ void print_time_count() { void LV_TASK_HANDLER() { lv_task_handler(); - if (mks_test_flag == 0x1E) mks_hardware_test(); + + #if BOTH(MKS_TEST, SDSUPPORT) + if (mks_test_flag == 0x1E) mks_hardware_test(); + #endif TERN_(HAS_GCODE_PREVIEW, disp_pre_gcode(2, 36)); diff --git a/Marlin/src/lcd/extui/mks_ui/irq_overrid.cpp b/Marlin/src/lcd/extui/mks_ui/irq_overrid.cpp index df48cbec0a..f3c87c03c4 100644 --- a/Marlin/src/lcd/extui/mks_ui/irq_overrid.cpp +++ b/Marlin/src/lcd/extui/mks_ui/irq_overrid.cpp @@ -19,14 +19,14 @@ * along with this program. If not, see . * */ +#ifdef __STM32F1__ + #include "../../../inc/MarlinConfigPre.h" -#if HAS_TFT_LVGL_UI +#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) #include "tft_lvgl_configuration.h" -#if ENABLED(MKS_WIFI_MODULE) - #include "draw_ui.h" #include "wifiSerial.h" @@ -46,15 +46,15 @@ #define WIFI_IO1_RESET() WRITE(WIFI_IO1_PIN, LOW); void __irq_usart1() { - if ((USART1_BASE->CR1 & USART_CR1_RXNEIE) && (USART1_BASE->SR & USART_SR_RXNE)) - WRITE(WIFI_IO1_PIN, HIGH); + if ((USART1_BASE->CR1 & USART_CR1_RXNEIE) && (USART1_BASE->SR & USART_SR_RXNE)) + WRITE(WIFI_IO1_PIN, HIGH); - WIFISERIAL.wifi_usart_irq(USART1_BASE); + WIFISERIAL.wifi_usart_irq(USART1_BASE); } #ifdef __cplusplus } /* C-declarations for C++ */ #endif -#endif // MKS_WIFI_MODULE -#endif // HAS_TFT_LVGL_UI +#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE +#endif // __STM32F1__ diff --git a/Marlin/src/lcd/extui/mks_ui/mks_hardware_test.cpp b/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp similarity index 78% rename from Marlin/src/lcd/extui/mks_ui/mks_hardware_test.cpp rename to Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp index bcb3cdb6a2..5cd1a4c525 100644 --- a/Marlin/src/lcd/extui/mks_ui/mks_hardware_test.cpp +++ b/Marlin/src/lcd/extui/mks_ui/mks_hardware.cpp @@ -27,7 +27,6 @@ #include "tft_lvgl_configuration.h" #include "draw_ready_print.h" -#include "mks_hardware_test.h" #include "draw_ui.h" #include "pic_manager.h" #include @@ -36,85 +35,161 @@ #include "../../../module/temperature.h" #include "../../../sd/cardreader.h" -uint8_t pw_det_sta, pw_off_sta, mt_det_sta, mt_det3_sta; -#if PIN_EXISTS(MT_DET_2) - uint8_t mt_det2_sta; -#endif -uint8_t endstopx1_sta, endstopx2_sta, endstopy1_sta, endstopy2_sta, endstopz1_sta, endstopz2_sta; -void test_gpio_readlevel_L() { - #if ENABLED(MKS_TEST) - volatile uint32_t itest; +#if ENABLED(MKS_TEST) + + #include "mks_hardware.h" + #include "../../../module/endstops.h" + + bool pw_det_sta, pw_off_sta, mt_det_sta; + #if PIN_EXISTS(MT_DET_2) + bool mt_det2_sta; + #endif + #if HAS_X_MIN || HAS_X_MAX + bool endstopx1_sta; + #else + constexpr static bool endstopx1_sta = true; + #endif + #if HAS_X2_MIN || HAS_X2_MAX + bool endstopx2_sta; + #else + constexpr static bool endstopx2_sta = true; + #endif + #if HAS_Y_MIN || HAS_Y_MAX + bool endstopy1_sta; + #else + constexpr static bool endstopy1_sta = true; + #endif + #if HAS_Y2_MIN || HAS_Y2_MAX + bool endstopy2_sta; + #else + constexpr static bool endstopy2_sta = true; + #endif + #if HAS_Z_MIN || HAS_Z_MAX + bool endstopz1_sta; + #else + constexpr static bool endstopz1_sta = true; + #endif + #if HAS_Z2_MIN || HAS_Z2_MAX + bool endstopz2_sta; + #else + constexpr static bool endstopz2_sta = true; + #endif + + #define ESTATE(S) (READ(S##_PIN) != S##_ENDSTOP_INVERTING) + + void test_gpio_readlevel_L() { WRITE(WIFI_IO0_PIN, HIGH); - itest = 10000; - while (itest--); - pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == 0); - pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == 0); - mt_det_sta = (READ(MT_DET_1_PIN) == 0); + delay(10); + pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == LOW); + pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == LOW); + mt_det_sta = (READ(MT_DET_1_PIN) == LOW); #if PIN_EXISTS(MT_DET_2) - mt_det2_sta = (READ(MT_DET_2_PIN) == 0); + mt_det2_sta = (READ(MT_DET_2_PIN) == LOW); #endif - endstopx1_sta = (READ(X_MIN_PIN) == 0); - endstopy1_sta = (READ(Y_MIN_PIN) == 0); - endstopz1_sta = (READ(Z_MIN_PIN) == 0); - endstopz2_sta = (READ(Z_MAX_PIN) == 0); - #endif -} + #if HAS_X_MIN + endstopx1_sta = ESTATE(X_MIN); + #elif HAS_X_MAX + endstopx1_sta = ESTATE(X_MAX); + #endif + #if HAS_X2_MIN + endstopx2_sta = ESTATE(X2_MIN); + #elif HAS_X2_MAX + endstopx2_sta = ESTATE(X2_MAX); + #endif + #if HAS_Y_MIN + endstopy1_sta = ESTATE(Y_MIN); + #elif HAS_Y_MAX + endstopy1_sta = ESTATE(Y_MAX); + #endif + #if HAS_Y2_MIN + endstopy2_sta = ESTATE(Y2_MIN); + #elif HAS_Y2_MAX + endstopy2_sta = ESTATE(Y2_MAX); + #endif + #if HAS_Z_MIN + endstopz1_sta = ESTATE(Z_MIN); + #elif HAS_Z_MAX + endstopz1_sta = ESTATE(Z_MAX); + #endif + #if HAS_Z2_MIN + endstopz2_sta = ESTATE(Z2_MIN); + #elif HAS_Z2_MAX + endstopz2_sta = ESTATE(Z2_MAX); + #endif + } -void test_gpio_readlevel_H() { - #if ENABLED(MKS_TEST) - volatile uint32_t itest; + void test_gpio_readlevel_H() { WRITE(WIFI_IO0_PIN, LOW); - itest = 10000; - while (itest--); - pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == 1); - pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == 1); - mt_det_sta = (READ(MT_DET_1_PIN) == 1); + delay(10); + pw_det_sta = (READ(MKS_TEST_POWER_LOSS_PIN) == HIGH); + pw_off_sta = (READ(MKS_TEST_PS_ON_PIN) == HIGH); + mt_det_sta = (READ(MT_DET_1_PIN) == HIGH); #if PIN_EXISTS(MT_DET_2) - mt_det2_sta = (READ(MT_DET_2_PIN) == 1); + mt_det2_sta = (READ(MT_DET_2_PIN) == HIGH); #endif - endstopx1_sta = (READ(X_MIN_PIN) == 1); - endstopy1_sta = (READ(Y_MIN_PIN) == 1); - endstopz1_sta = (READ(Z_MIN_PIN) == 1); - endstopz2_sta = (READ(Z_MAX_PIN) == 1); - #endif -} + #if HAS_X_MIN + endstopx1_sta = !ESTATE(X_MIN); + #elif HAS_X_MAX + endstopx1_sta = !ESTATE(X_MAX); + #endif + #if HAS_X2_MIN + endstopx2_sta = !ESTATE(X2_MIN); + #elif HAS_X2_MAX + endstopx2_sta = !ESTATE(X2_MAX); + #endif + #if HAS_Y_MIN + endstopy1_sta = !ESTATE(Y_MIN); + #elif HAS_Y_MAX + endstopy1_sta = !ESTATE(Y_MAX); + #endif + #if HAS_Y2_MIN + endstopy2_sta = !ESTATE(Y2_MIN); + #elif HAS_Y2_MAX + endstopy2_sta = !ESTATE(Y2_MAX); + #endif + #if HAS_Z_MIN + endstopz1_sta = !ESTATE(Z_MIN); + #elif HAS_Z_MAX + endstopz1_sta = !ESTATE(Z_MAX); + #endif + #if HAS_Z2_MIN + endstopz2_sta = !ESTATE(Z2_MIN); + #elif HAS_Z2_MAX + endstopz2_sta = !ESTATE(Z2_MAX); + #endif + } -void init_test_gpio() { - #ifdef MKS_TEST - SET_INPUT_PULLUP(X_MIN_PIN); - SET_INPUT_PULLUP(Y_MIN_PIN); - SET_INPUT_PULLUP(Z_MIN_PIN); - SET_INPUT_PULLUP(Z_MAX_PIN); + void init_test_gpio() { + endstops.init(); SET_OUTPUT(WIFI_IO0_PIN); - SET_INPUT_PULLUP(MT_DET_1_PIN); + #if PIN_EXISTS(MT_DET_1) + SET_INPUT_PULLUP(MT_DET_1_PIN); + #endif #if PIN_EXISTS(MT_DET_2) SET_INPUT_PULLUP(MT_DET_2_PIN); #endif SET_INPUT_PULLUP(MKS_TEST_POWER_LOSS_PIN); SET_INPUT_PULLUP(MKS_TEST_PS_ON_PIN); - SET_INPUT_PULLUP(SERVO0_PIN); - SET_OUTPUT(X_ENABLE_PIN); - SET_OUTPUT(Y_ENABLE_PIN); - SET_OUTPUT(Z_ENABLE_PIN); - SET_OUTPUT(E0_ENABLE_PIN); - #if !MB(MKS_ROBIN_E3P) - SET_OUTPUT(E1_ENABLE_PIN); + OUT_WRITE(X_ENABLE_PIN, LOW); + #if HAS_Y_AXIS + OUT_WRITE(Y_ENABLE_PIN, LOW); + #endif + #if HAS_Z_AXIS + OUT_WRITE(Z_ENABLE_PIN, LOW); + #endif + #if HAS_EXTRUDERS + OUT_WRITE(E0_ENABLE_PIN, LOW); + #endif + #if HAS_MULTI_EXTRUDER && DISABLED(MKS_HARDWARE_TEST_ONLY_E0) + OUT_WRITE(E1_ENABLE_PIN, LOW); #endif - WRITE(X_ENABLE_PIN, LOW); - WRITE(Y_ENABLE_PIN, LOW); - WRITE(Z_ENABLE_PIN, LOW); - WRITE(E0_ENABLE_PIN, LOW); - #if !MB(MKS_ROBIN_E3P) - WRITE(E1_ENABLE_PIN, LOW); - #endif - - #if MB(MKS_ROBIN_E3P) + #if ENABLED(MKS_HARDWARE_TEST_ONLY_E0) SET_INPUT_PULLUP(PA1); SET_INPUT_PULLUP(PA3); SET_INPUT_PULLUP(PC2); @@ -123,103 +198,112 @@ void init_test_gpio() { SET_INPUT_PULLUP(PE6); SET_INPUT_PULLUP(PE7); #endif - #endif -} + } -void mks_test_beeper() { - #ifdef MKS_TEST + void mks_test_beeper() { WRITE(BEEPER_PIN, HIGH); delay(100); WRITE(BEEPER_PIN, LOW); delay(100); - #endif -} + } -void mks_gpio_test() { - #if ENABLED(MKS_TEST) - init_test_gpio(); + #if ENABLED(SDSUPPORT) - test_gpio_readlevel_L(); - test_gpio_readlevel_H(); - test_gpio_readlevel_L(); - if ((pw_det_sta == 1) - && (pw_off_sta == 1) - && (mt_det_sta == 1) - #if PIN_EXISTS(MT_DET_2) - && (mt_det2_sta == 1) - #endif - #if MB(MKS_ROBIN_E3P) - && (READ(PA1) == 0) - && (READ(PA3) == 0) - && (READ(PC2) == 0) - && (READ(PD8) == 0) - && (READ(PE5) == 0) - && (READ(PE6) == 0) - && (READ(PE7) == 0) - #endif - ) - disp_det_ok(); - else - disp_det_error(); + void mks_gpio_test() { + init_test_gpio(); - if ( (endstopx1_sta == 1) - && (endstopy1_sta == 1) - && (endstopz1_sta == 1) - && (endstopz2_sta == 1) - ) - disp_Limit_ok(); - else - disp_Limit_error(); - #endif -} + test_gpio_readlevel_L(); + test_gpio_readlevel_H(); + test_gpio_readlevel_L(); + if (pw_det_sta && pw_off_sta && mt_det_sta + #if PIN_EXISTS(MT_DET_2) + && mt_det2_sta + #endif + #if ENABLED(MKS_HARDWARE_TEST_ONLY_E0) + && (READ(PA1) == LOW) + && (READ(PA3) == LOW) + && (READ(PC2) == LOW) + && (READ(PD8) == LOW) + && (READ(PE5) == LOW) + && (READ(PE6) == LOW) + && (READ(PE7) == LOW) + #endif + ) + disp_det_ok(); + else + disp_det_error(); -void mks_hardware_test() { - #if ENABLED(MKS_TEST) - if (millis() % 2000 < 1000) { - WRITE(X_DIR_PIN, LOW); - WRITE(Y_DIR_PIN, LOW); - WRITE(Z_DIR_PIN, LOW); - WRITE(E0_DIR_PIN, LOW); - #if !MB(MKS_ROBIN_E3P) - WRITE(E1_DIR_PIN, LOW); - #endif - thermalManager.fan_speed[0] = 255; - #if !MB(MKS_ROBIN_E3P) - WRITE(HEATER_1_PIN, HIGH); // HE1 - #endif - WRITE(HEATER_0_PIN, HIGH); // HE0 - WRITE(HEATER_BED_PIN, HIGH); // HOT-BED - } - else { - WRITE(X_DIR_PIN, HIGH); - WRITE(Y_DIR_PIN, HIGH); - WRITE(Z_DIR_PIN, HIGH); - WRITE(E0_DIR_PIN, HIGH); - #if !MB(MKS_ROBIN_E3P) - WRITE(E1_DIR_PIN, HIGH); - #endif - thermalManager.fan_speed[0] = 0; - #if !MB(MKS_ROBIN_E3P) - WRITE(HEATER_1_PIN, LOW); // HE1 - #endif - WRITE(HEATER_0_PIN, LOW); // HE0 - WRITE(HEATER_BED_PIN, LOW); // HOT-BED + if (endstopx1_sta && endstopy1_sta && endstopz1_sta && endstopz2_sta) + disp_Limit_ok(); + else + disp_Limit_error(); } - if ( (endstopx1_sta == 1) && (endstopx2_sta == 1) - && (endstopy1_sta == 1) && (endstopy2_sta == 1) - && (endstopz1_sta == 1) && (endstopz2_sta == 1) - ) { - // nothing here - } - else { - } + void mks_hardware_test() { + if (millis() % 2000 < 1000) { + thermalManager.fan_speed[0] = 255; + WRITE(X_DIR_PIN, LOW); + #if HAS_Y_AXIS + WRITE(Y_DIR_PIN, LOW); + #endif + #if HAS_Z_AXIS + WRITE(Z_DIR_PIN, LOW); + #endif + #if HAS_EXTRUDERS + WRITE(E0_DIR_PIN, LOW); + #endif + #if HAS_MULTI_EXTRUDER && DISABLED(MKS_HARDWARE_TEST_ONLY_E0) + WRITE(E1_DIR_PIN, LOW); + #endif + #if HAS_MULTI_HOTEND && DISABLED(MKS_HARDWARE_TEST_ONLY_E0) + WRITE(HEATER_1_PIN, HIGH); // HE1 + #endif + #if HAS_HOTEND + WRITE(HEATER_0_PIN, HIGH); // HE0 + #endif + #if HAS_HEATED_BED + WRITE(HEATER_BED_PIN, HIGH); // HOT-BED + #endif + } + else { + thermalManager.fan_speed[0] = 0; + WRITE(X_DIR_PIN, HIGH); + #if HAS_Y_AXIS + WRITE(Y_DIR_PIN, HIGH); + #endif + #if HAS_Y_AXIS + WRITE(Z_DIR_PIN, HIGH); + #endif + #if HAS_EXTRUDERS + WRITE(E0_DIR_PIN, HIGH); + #endif + #if HAS_MULTI_EXTRUDER && DISABLED(MKS_HARDWARE_TEST_ONLY_E0) + WRITE(E1_DIR_PIN, HIGH); + #endif + #if HAS_MULTI_HOTEND && DISABLED(MKS_HARDWARE_TEST_ONLY_E0) + WRITE(HEATER_1_PIN, LOW); // HE1 + #endif + #if HAS_HOTEND + WRITE(HEATER_0_PIN, LOW); // HE0 + #endif + #if HAS_HEATED_BED + WRITE(HEATER_BED_PIN, LOW); // HOT-BED + #endif + } - if (disp_state == PRINT_READY_UI) - mks_disp_test(); + if (endstopx1_sta && endstopx2_sta && endstopy1_sta && endstopy2_sta && endstopz1_sta && endstopz2_sta) { + // nothing here + } + else { + } + + if (disp_state == PRINT_READY_UI) + mks_disp_test(); + } #endif -} + +#endif // MKS_TEST static const uint16_t ASCII_Table_16x24[] PROGMEM = { // Space ' ' @@ -633,10 +717,9 @@ void disp_assets_update_progress(const char *msg) { disp_string(100, 165, buf, 0xFFFF, 0x0000); } -uint8_t mks_test_flag = 0; -const char *MKSTestPath = "MKS_TEST"; - -#if ENABLED(SDSUPPORT) +#if BOTH(MKS_TEST, SDSUPPORT) + uint8_t mks_test_flag = 0; + const char *MKSTestPath = "MKS_TEST"; void mks_test_get() { SdFile dir, root = card.getroot(); if (dir.open(&root, MKSTestPath, O_RDONLY)) diff --git a/Marlin/src/lcd/extui/mks_ui/mks_hardware_test.h b/Marlin/src/lcd/extui/mks_ui/mks_hardware.h similarity index 79% rename from Marlin/src/lcd/extui/mks_ui/mks_hardware_test.h rename to Marlin/src/lcd/extui/mks_ui/mks_hardware.h index 0e2d8096ba..5313265662 100644 --- a/Marlin/src/lcd/extui/mks_ui/mks_hardware_test.h +++ b/Marlin/src/lcd/extui/mks_ui/mks_hardware.h @@ -21,13 +21,21 @@ */ #pragma once +#include "../../../inc/MarlinConfigPre.h" + #include -void mks_gpio_test(); -void disp_char_1624(uint16_t x, uint16_t y, uint8_t c, uint16_t charColor, uint16_t bkColor); +// Functions for MKS_TEST +#if BOTH(MKS_TEST, SDSUPPORT) + void mks_hardware_test(); + void mks_test_get(); + void mks_gpio_test(); + extern uint8_t mks_test_flag; +#else + #define mks_test_flag 0 +#endif + +// String display and assets void disp_string(uint16_t x, uint16_t y, const char * string, uint16_t charColor, uint16_t bkColor); -void mks_hardware_test(); void disp_assets_update(); void disp_assets_update_progress(const char *msg); -void mks_test_get(); -extern uint8_t mks_test_flag; diff --git a/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp b/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp index da7b1929ce..68344e770c 100644 --- a/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp +++ b/Marlin/src/lcd/extui/mks_ui/pic_manager.cpp @@ -27,11 +27,9 @@ #include "draw_ui.h" #include "pic_manager.h" #include "draw_ready_print.h" -#include "mks_hardware_test.h" - +#include "mks_hardware.h" #include "SPIFlashStorage.h" #include "../../../libs/W25Qxx.h" - #include "../../../sd/cardreader.h" #include "../../../MarlinCore.h" diff --git a/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp b/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp index b618a01957..5e359c4091 100644 --- a/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp +++ b/Marlin/src/lcd/extui/mks_ui/printer_operation.cpp @@ -158,19 +158,12 @@ void filament_pin_setup() { } void filament_check() { - const int FIL_DELAY = 20; + #if ANY_PIN(MT_DET_1, MT_DET_2, MT_DET_3) + const int FIL_DELAY = 20; + #endif #if PIN_EXISTS(MT_DET_1) static int fil_det_count_1 = 0; - if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_1++; - else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING) - fil_det_count_1++; - else if (fil_det_count_1 > 0) - fil_det_count_1--; - - if (!READ(MT_DET_1_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_1++; - else if (READ(MT_DET_1_PIN) && MT_DET_PIN_INVERTING) + if (READ(MT_DET_1_PIN) == MT_DET_PIN_INVERTING) fil_det_count_1++; else if (fil_det_count_1 > 0) fil_det_count_1--; @@ -178,16 +171,7 @@ void filament_check() { #if PIN_EXISTS(MT_DET_2) static int fil_det_count_2 = 0; - if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_2++; - else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING) - fil_det_count_2++; - else if (fil_det_count_2 > 0) - fil_det_count_2--; - - if (!READ(MT_DET_2_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_2++; - else if (READ(MT_DET_2_PIN) && MT_DET_PIN_INVERTING) + if (READ(MT_DET_2_PIN) == MT_DET_PIN_INVERTING) fil_det_count_2++; else if (fil_det_count_2 > 0) fil_det_count_2--; @@ -195,16 +179,7 @@ void filament_check() { #if PIN_EXISTS(MT_DET_3) static int fil_det_count_3 = 0; - if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_3++; - else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING) - fil_det_count_3++; - else if (fil_det_count_3 > 0) - fil_det_count_3--; - - if (!READ(MT_DET_3_PIN) && !MT_DET_PIN_INVERTING) - fil_det_count_3++; - else if (READ(MT_DET_3_PIN) && MT_DET_PIN_INVERTING) + if (READ(MT_DET_3_PIN) == MT_DET_PIN_INVERTING) fil_det_count_3++; else if (fil_det_count_3 > 0) fil_det_count_3--; diff --git a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp index 84e3040e84..2127b23a15 100644 --- a/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp +++ b/Marlin/src/lcd/extui/mks_ui/tft_lvgl_configuration.cpp @@ -29,7 +29,7 @@ #include "draw_ready_print.h" #include "pic_manager.h" -#include "mks_hardware_test.h" +#include "mks_hardware.h" #include "draw_ui.h" #include "SPIFlashStorage.h" #include @@ -45,6 +45,14 @@ XPT2046 touch; #include "../../../feature/powerloss.h" #endif +#if HAS_SERVOS + #include "../../../module/servo.h" +#endif + +#if EITHER(PROBE_TARE, HAS_Z_SERVO_PROBE) + #include "../../../module/probe.h" +#endif + #if ENABLED(TOUCH_SCREEN_CALIBRATION) #include "../../tft_io/touch_calibration.h" #include "draw_touch_calibration.h" @@ -131,10 +139,9 @@ void tft_lvgl_init() { #if ENABLED(SDSUPPORT) UpdateAssets(); watchdog_refresh(); // LVGL init takes time + TERN_(MKS_TEST, mks_test_get()); #endif - mks_test_get(); - touch.Init(); lv_init(); @@ -193,8 +200,12 @@ void tft_lvgl_init() { filament_pin_setup(); lv_encoder_pin_init(); - TERN_(MKS_WIFI_MODULE, mks_wifi_firmware_update()); - + #if ENABLED(MKS_WIFI_MODULE) + mks_esp_wifi_init(); + mks_wifi_firmware_update(); + #endif + TERN_(HAS_SERVOS, servo_init()); + TERN_(HAS_Z_SERVO_PROBE, probe.servo_probe_init()); bool ready = true; #if ENABLED(POWER_LOSS_RECOVERY) recovery.load(); @@ -207,16 +218,22 @@ void tft_lvgl_init() { uiCfg.print_state = REPRINTING; - strncpy(public_buf_m, recovery.info.sd_filename, sizeof(public_buf_m)); - card.printLongPath(public_buf_m); - strncpy(list_file.long_name[sel_id], card.longFilename, sizeof(list_file.long_name[0])); + #if ENABLED(LONG_FILENAME_HOST_SUPPORT) + strncpy(public_buf_m, recovery.info.sd_filename, sizeof(public_buf_m)); + card.printLongPath(public_buf_m); + strncpy(list_file.long_name[sel_id], card.longFilename, sizeof(list_file.long_name[0])); + #else + strncpy(list_file.long_name[sel_id], recovery.info.sd_filename, sizeof(list_file.long_name[0])); + #endif lv_draw_printing(); } #endif if (ready) lv_draw_ready_print(); - if (mks_test_flag == 0x1E) mks_gpio_test(); + #if BOTH(MKS_TEST, SDSUPPORT) + if (mks_test_flag == 0x1E) mks_gpio_test(); + #endif } void my_disp_flush(lv_disp_drv_t * disp, const lv_area_t * area, lv_color_t * color_p) { diff --git a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp index b34942303a..0771a31cb4 100644 --- a/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp +++ b/Marlin/src/lcd/extui/mks_ui/tft_multi_language.cpp @@ -58,6 +58,8 @@ pause_msg_def pause_msg_menu; eeprom_def eeprom_menu; media_select_menu_def media_select_menu; +// TODO: Make all strings PSTR and update accessors for the benefit of AVR + machine_common_def machine_menu; void machine_setting_disp() { if (gCfgItems.language == LANG_SIMPLE_CHINESE) { @@ -1093,8 +1095,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_CN; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_CN; eeprom_menu.storeTips = EEPROM_STORE_TIPS_CN; - eeprom_menu.readTips = EEPROM_READ_TIPS_CN; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_CN; + eeprom_menu.readTips = EEPROM_READ_TIPS_CN; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_CN; break; #if 1 @@ -1337,8 +1339,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_T_CN; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_T_CN; eeprom_menu.storeTips = EEPROM_STORE_TIPS_T_CN; - eeprom_menu.readTips = EEPROM_READ_TIPS_T_CN; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_T_CN; + eeprom_menu.readTips = EEPROM_READ_TIPS_T_CN; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_T_CN; break; case LANG_ENGLISH: common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_EN; @@ -1571,8 +1573,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_EN; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_EN; eeprom_menu.storeTips = EEPROM_STORE_TIPS_EN; - eeprom_menu.readTips = EEPROM_READ_TIPS_EN; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN; + eeprom_menu.readTips = EEPROM_READ_TIPS_EN; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN; break; case LANG_RUSSIAN: common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_RU; @@ -1896,8 +1898,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_RU; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_RU; eeprom_menu.storeTips = EEPROM_STORE_TIPS_RU; - eeprom_menu.readTips = EEPROM_READ_TIPS_RU; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_RU; + eeprom_menu.readTips = EEPROM_READ_TIPS_RU; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_RU; break; case LANG_SPANISH: common_menu.dialog_confirm_title = TITLE_DIALOG_CONFIRM_SP; @@ -2133,8 +2135,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_SP; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_SP; eeprom_menu.storeTips = EEPROM_STORE_TIPS_SP; - eeprom_menu.readTips = EEPROM_READ_TIPS_SP; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_SP; + eeprom_menu.readTips = EEPROM_READ_TIPS_SP; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_SP; break; #endif // if 1 @@ -2367,8 +2369,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_FR; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_FR; eeprom_menu.storeTips = EEPROM_STORE_TIPS_FR; - eeprom_menu.readTips = EEPROM_READ_TIPS_FR; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_FR; + eeprom_menu.readTips = EEPROM_READ_TIPS_FR; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_FR; break; case LANG_ITALY: @@ -2600,8 +2602,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_IT; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_IT; eeprom_menu.storeTips = EEPROM_STORE_TIPS_IT; - eeprom_menu.readTips = EEPROM_READ_TIPS_IT; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_IT; + eeprom_menu.readTips = EEPROM_READ_TIPS_IT; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_IT; break; #endif // if 1 @@ -2836,8 +2838,8 @@ void disp_language_init() { eeprom_menu.read = EEPROM_SETTINGS_READ_EN; eeprom_menu.revert = EEPROM_SETTINGS_REVERT_EN; eeprom_menu.storeTips = EEPROM_STORE_TIPS_EN; - eeprom_menu.readTips = EEPROM_READ_TIPS_EN; - eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN; + eeprom_menu.readTips = EEPROM_READ_TIPS_EN; + eeprom_menu.revertTips = EEPROM_REVERT_TIPS_EN; break; } } diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial.h b/Marlin/src/lcd/extui/mks_ui/wifiSerial.h index fcc35a6a65..1a3e9aae9b 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifiSerial.h +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial.h @@ -21,10 +21,6 @@ */ #pragma once -#include "tft_lvgl_configuration.h" - -#if ENABLED(MKS_WIFI_MODULE) - #ifdef SERIAL_PORT_2 #error "SERIAL_PORT_2 must be disabled with TFT_LVGL_UI* and MKS_WIFI_MODULE." #endif @@ -33,70 +29,16 @@ #define WIFI_UPLOAD_BAUDRATE 1958400 #define USART_SAFE_INSERT -#define WIFI_RX_BUF_SIZE (1024+1) +#define WIFI_RX_BUF_SIZE (1024) +#define WIFI_TX_BUF_SIZE (64) -#include -#include -#include -#include -#include -#include +#include "tft_lvgl_configuration.h" -#define DEFINE_WFSERIAL(name, n)\ - WifiSerial name(USART##n, \ - BOARD_USART##n##_TX_PIN, \ - BOARD_USART##n##_RX_PIN) - -class WifiSerial { - public: - uint8 wifiRxBuf[WIFI_RX_BUF_SIZE]; - - public: - WifiSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin); - - /* Set up/tear down */ - void begin(uint32 baud); - void begin(uint32 baud,uint8_t config); - void end(); - int available(); - int read(); - int write(uint8_t); - inline void wifi_usart_irq(usart_reg_map *regs) { - /* Handling RXNEIE and TXEIE interrupts. - * RXNE signifies availability of a byte in DR. - * - * See table 198 (sec 27.4, p809) in STM document RM0008 rev 15. - * We enable RXNEIE. - */ - if ((regs->CR1 & USART_CR1_RXNEIE) && (regs->SR & USART_SR_RXNE)) { - #ifdef USART_SAFE_INSERT - /* If the buffer is full and the user defines USART_SAFE_INSERT, - * ignore new bytes. */ - rb_safe_insert(this->usart_device->rb, (uint8)regs->DR); - #else - /* By default, push bytes around in the ring buffer. */ - rb_push_insert(this->usart_device->rb, (uint8)regs->DR); - #endif - } - /* TXE signifies readiness to send a byte to DR. */ - if ((regs->CR1 & USART_CR1_TXEIE) && (regs->SR & USART_SR_TXE)) { - if (!rb_is_empty(this->usart_device->wb)) - regs->DR=rb_remove(this->usart_device->wb); - else - regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE - } - } - - int wifi_rb_is_full(); - - struct usart_dev *usart_device; - private: - uint8 tx_pin; - uint8 rx_pin; -}; +#ifdef __STM32F1__ + #include "wifiSerial_STM32F1.h" +#else + #include "wifiSerial_STM32.h" +#endif extern WifiSerial WifiSerial1; - -#define WIFISERIAL WifiSerial1 - -#endif // MKS_WIFI_MODULE +#define WIFISERIAL WifiSerial1 diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp new file mode 100644 index 0000000000..39d8562676 --- /dev/null +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.cpp @@ -0,0 +1,352 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC) && !defined(MAPLE_STM32F1) + +#include "../../../inc/MarlinConfigPre.h" + +#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) + +#include "tft_lvgl_configuration.h" + +#include "draw_ui.h" +#include "wifiSerial.h" + +WifiSerial WifiSerial1(USART1); + +void WifiSerial::setRx(uint32_t _rx) { _serial.pin_rx = digitalPinToPinName(_rx); } +void WifiSerial::setTx(uint32_t _tx) { _serial.pin_tx = digitalPinToPinName(_tx); } +void WifiSerial::setRx(PinName _rx) { _serial.pin_rx = _rx; } +void WifiSerial::setTx(PinName _tx) { _serial.pin_tx = _tx; } + +void WifiSerial::init(PinName _rx, PinName _tx) { + _serial.pin_rx = (_rx == _tx) ? NC : _rx; + _serial.pin_tx = _tx; + _serial.rx_buff = wifiRxBuf; + _serial.rx_head = 0; + _serial.rx_tail = 0; + _serial.tx_buff = wifiTxBuf; + _serial.tx_head = 0; + _serial.tx_tail = 0; +} + +WifiSerial::WifiSerial(void *peripheral) { + // If PIN_SERIALy_RX is not defined assume half-duplex + _serial.pin_rx = NC; + // If Serial is defined in variant set + // the Rx/Tx pins for com port if defined + #if defined(Serial) && defined(PIN_SERIAL_TX) + if ((void *)this == (void *)&Serial) { + #ifdef PIN_SERIAL_RX + setRx(PIN_SERIAL_RX); + #endif + setTx(PIN_SERIAL_TX); + } else + #endif + #if defined(PIN_SERIAL1_TX) && defined(USART1_BASE) + if (peripheral == USART1) { + #ifdef PIN_SERIAL1_RX + setRx(PIN_SERIAL1_RX); + #endif + setTx(PIN_SERIAL1_TX); + } else + #endif + #if defined(PIN_SERIAL2_TX) && defined(USART2_BASE) + if (peripheral == USART2) { + #ifdef PIN_SERIAL2_RX + setRx(PIN_SERIAL2_RX); + #endif + setTx(PIN_SERIAL2_TX); + } else + #endif + #if defined(PIN_SERIAL3_TX) && defined(USART3_BASE) + if (peripheral == USART3) { + #ifdef PIN_SERIAL3_RX + setRx(PIN_SERIAL3_RX); + #endif + setTx(PIN_SERIAL3_TX); + } else + #endif + #ifdef PIN_SERIAL4_TX + if (false + #ifdef USART4_BASE + || peripheral == USART4 + #elif defined(UART4_BASE) + || peripheral == UART4 + #endif + ) { + #ifdef PIN_SERIAL4_RX + setRx(PIN_SERIAL4_RX); + #endif + setTx(PIN_SERIAL4_TX); + } else + #endif + #ifdef PIN_SERIAL5_TX + if (false + #ifdef USART5_BASE + || peripheral == USART5 + #elif defined(UART5_BASE) + || peripheral == UART5 + #endif + ) { + #ifdef PIN_SERIAL5_RX + setRx(PIN_SERIAL5_RX); + #endif + setTx(PIN_SERIAL5_TX); + } else + #endif + #if defined(PIN_SERIAL6_TX) && defined(USART6_BASE) + if (peripheral == USART6) { + #ifdef PIN_SERIAL6_RX + setRx(PIN_SERIAL6_RX); + #endif + setTx(PIN_SERIAL6_TX); + } else + #endif + #ifdef PIN_SERIAL7_TX + if (false + #ifdef USART7_BASE + || peripheral == USART7 + #elif defined(UART7_BASE) + || peripheral == UART7 + #endif + ) { + #ifdef PIN_SERIAL7_RX + setRx(PIN_SERIAL7_RX); + #endif + setTx(PIN_SERIAL7_TX); + } else + #endif + #ifdef PIN_SERIAL8_TX + if (false + #ifdef USART8_BASE + || peripheral == USART8 + #elif defined(UART8_BASE) + || peripheral == UART8 + #endif + ) { + #ifdef PIN_SERIAL8_RX + setRx(PIN_SERIAL8_RX); + #endif + setTx(PIN_SERIAL8_TX); + } else + #endif + #if defined(PIN_SERIAL9_TX) && defined(UART9_BASE) + if (peripheral == UART9) { + #ifdef PIN_SERIAL9_RX + setRx(PIN_SERIAL9_RX); + #endif + setTx(PIN_SERIAL9_TX); + } else + #endif + #ifdef PIN_SERIAL10_TX + if (false + #ifdef USART10_BASE + || peripheral == USART10 + #elif defined(UART10_BASE) + || peripheral == UART10 + #endif + ) { + #ifdef PIN_SERIAL10_RX + setRx(PIN_SERIAL10_RX); + #endif + setTx(PIN_SERIAL10_TX); + } else + #endif + #if defined(PIN_SERIALLP1_TX) && defined(LPUART1_BASE) + if (peripheral == LPUART1) { + #ifdef PIN_SERIALLP1_RX + setRx(PIN_SERIALLP1_RX); + #endif + setTx(PIN_SERIALLP1_TX); + } else + #endif + // else get the pins of the first peripheral occurrence in PinMap + { + _serial.pin_rx = pinmap_pin(peripheral, PinMap_UART_RX); + _serial.pin_tx = pinmap_pin(peripheral, PinMap_UART_TX); + } + //if (halfDuplex == HALF_DUPLEX_ENABLED) _serial.pin_rx = NC; + init(_serial.pin_rx, _serial.pin_tx); +} + +void WifiSerial::flush() { + // If we have never written a byte, no need to flush. This special + // case is needed since there is no way to force the TXC (transmit + // complete) bit to 1 during initialization + if (!_written) return; + + while ((_serial.tx_head != _serial.tx_tail)) { + // nop, the interrupt handler will free up space for us + } + // If we get here, nothing is queued anymore (DRIE is disabled) and + // the hardware finished tranmission (TXC is set). +} + +bool WifiSerial::isHalfDuplex() const { return _serial.pin_rx == NC; } + +void WifiSerial::enableHalfDuplexRx() { + if (isHalfDuplex()) { + // In half-duplex mode we have to wait for all TX characters to + // be transmitted before we can receive data. + flush(); + if (!_rx_enabled) { + _rx_enabled = true; + uart_enable_rx(&_serial); + } + } +} + +// Actual interrupt handlers ////////////////////////////////////////////////////////////// + +void WifiSerial::_rx_complete_irq(serial_t *obj) { + // No Parity error, read byte and store it in the buffer if there is room + unsigned char c; + + if (uart_getc(obj, &c) == 0) { + + WRITE(WIFI_IO1_PIN, HIGH); + + rx_buffer_index_t i = (unsigned int)(obj->rx_head + 1) % WIFI_RX_BUF_SIZE; + + // if we should be storing the received character into the location + // just before the tail (meaning that the head would advance to the + // current location of the tail), we're about to overflow the buffer + // and so we don't write the character or advance the head. + if (i != obj->rx_tail) { + obj->rx_buff[obj->rx_head] = c; + obj->rx_head = i; + } + } +} + +// Actual interrupt handlers ////////////////////////////////////////////////////////////// + +int WifiSerial::_tx_complete_irq(serial_t *obj) { + // If interrupts are enabled, there must be more data in the output + // buffer. Send the next byte + obj->tx_tail = (obj->tx_tail + 1) % WIFI_TX_BUF_SIZE; + + return (obj->tx_head == obj->tx_tail) ? -1 : 0; +} + +void WifiSerial::begin(unsigned long baud) { begin(baud, SERIAL_8N1); } + +void WifiSerial::begin(unsigned long baud, byte config) { + uint32_t databits = 0, stopbits = 0, parity = 0; + + _baud = baud; + _config = config; + + // Manage databits + switch (config & 0x07) { + case 0x02: databits = 6; break; + case 0x04: databits = 7; break; + case 0x06: databits = 8; break; + default: databits = 0; break; + } + + if ((config & 0x30) == 0x30) { + parity = UART_PARITY_ODD; + databits++; + } + else if ((config & 0x20) == 0x20) { + parity = UART_PARITY_EVEN; + databits++; + } + else + parity = UART_PARITY_NONE; + + stopbits = ((config & 0x08) == 0x08) ? UART_STOPBITS_2 : UART_STOPBITS_1; + + switch (databits) { + #ifdef UART_WORDLENGTH_7B + case 7: databits = UART_WORDLENGTH_7B; break; + #endif + case 8: databits = UART_WORDLENGTH_8B; break; + case 9: databits = UART_WORDLENGTH_9B; break; + default: + case 0: Error_Handler(); break; + } + + uart_init(&_serial, (uint32_t)baud, databits, parity, stopbits); + enableHalfDuplexRx(); + if (baud == WIFI_BAUDRATE) + uart_attach_rx_callback(&_serial, _rx_complete_irq); + else + USART1->CR1 |= USART_CR1_RE; // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1 +} + +void WifiSerial::end() { + // wait for transmission of outgoing data + flush(); + + uart_deinit(&_serial); + + // clear any received data + _serial.rx_head = _serial.rx_tail; +} + +int WifiSerial::available() { + return ((unsigned int)(WIFI_RX_BUF_SIZE + _serial.rx_head - _serial.rx_tail)) % WIFI_RX_BUF_SIZE; +} + +// +// I/O +// +int WifiSerial::read() { + enableHalfDuplexRx(); + // if the head isn't ahead of the tail, we don't have any characters + if (_serial.rx_head == _serial.rx_tail) return -1; + + unsigned char c = _serial.rx_buff[_serial.rx_tail]; + _serial.rx_tail = (rx_buffer_index_t)(_serial.rx_tail + 1) % WIFI_RX_BUF_SIZE; + return c; +} + +int WifiSerial::write(uint8_t c) { + _written = true; + if (isHalfDuplex()) { + if (_rx_enabled) { + _rx_enabled = false; + uart_enable_tx(&_serial); + } + } + + tx_buffer_index_t i = (_serial.tx_head + 1) % WIFI_TX_BUF_SIZE; + + // If the output buffer is full, there's nothing for it other than to + // wait for the interrupt handler to empty it a bit + while (i == _serial.tx_tail) { + // nop, the interrupt handler will free up space for us + } + + _serial.tx_buff[_serial.tx_head] = c; + _serial.tx_head = i; + + if (!serial_tx_active(&_serial)) + uart_attach_tx_callback(&_serial, _tx_complete_irq); + + return 1; +} + +#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE +#endif // !__STM32F1__ diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.h b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.h new file mode 100644 index 0000000000..87de27c044 --- /dev/null +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32.h @@ -0,0 +1,63 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include +#include "Stream.h" +#include "uart.h" + +class WifiSerial { + protected: + // Has any byte been written to the UART since begin() + bool _written; + serial_t _serial; + public: + uint8_t wifiRxBuf[WIFI_RX_BUF_SIZE]; + uint8_t wifiTxBuf[WIFI_TX_BUF_SIZE]; + WifiSerial(void *peripheral); + + // Set up / tear down + void begin(uint32_t baud); + void begin(uint32_t baud,uint8_t config); + void end(); + int available(void); + int read(void); + int write(uint8_t); + + // Interrupt handlers + static int _tx_complete_irq(serial_t *obj); + static void _rx_complete_irq(serial_t *obj); + + void flush(void); + bool isHalfDuplex(void) const; + void enableHalfDuplexRx(void); + + private: + void setRx(uint32_t _rx); + void setTx(uint32_t _tx); + void setRx(PinName _rx); + void setTx(PinName _tx); + void init(PinName _rx, PinName _tx); + bool _rx_enabled; + uint8_t _config; + unsigned long _baud; +}; diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial.cpp b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.cpp similarity index 88% rename from Marlin/src/lcd/extui/mks_ui/wifiSerial.cpp rename to Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.cpp index d00fd269d8..75830ce1bd 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifiSerial.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.cpp @@ -1,6 +1,6 @@ /** * Marlin 3D Printer Firmware - * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] * * Based on Sprinter and grbl. * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm @@ -19,14 +19,14 @@ * along with this program. If not, see . * */ +#ifdef __STM32F1__ + #include "../../../inc/MarlinConfigPre.h" -#if HAS_TFT_LVGL_UI +#if BOTH(HAS_TFT_LVGL_UI, MKS_WIFI_MODULE) #include "tft_lvgl_configuration.h" -#if ENABLED(MKS_WIFI_MODULE) - #include "draw_ui.h" #include "wifiSerial.h" @@ -59,19 +59,19 @@ WifiSerial::WifiSerial(usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin) { if (with_irq) usart_enable(usart_device); else { usart_reg_map *regs = usart_device->regs; - regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // don't change the word length etc, and 'or' in the pattern not overwrite |USART_CR1_M_8N1); + regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1 regs->CR1 |= USART_CR1_UE; } } #elif STM32_MCU_SERIES == STM32_SERIES_F2 || STM32_MCU_SERIES == STM32_SERIES_F4 - #define disable_timer_if_necessary(dev, ch) ((void)0) + #define disable_timer_if_necessary(dev, ch) NOOP static void usart_enable_no_irq(usart_dev *usart_device, bool with_irq) { if (with_irq) usart_enable(usart_device); else { usart_reg_map *regs = usart_device->regs; - regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // don't change the word length etc, and 'or' in the pattern not overwrite |USART_CR1_M_8N1); + regs->CR1 |= (USART_CR1_TE | USART_CR1_RE); // Preserve word length, etc. Use 'or' to preserve USART_CR1_M_8N1 regs->CR1 |= USART_CR1_UE; } } @@ -137,5 +137,5 @@ int WifiSerial::wifi_rb_is_full() { return rb_is_full(this->usart_device->rb); } -#endif // MKS_WIFI_MODULE -#endif // HAS_TFT_LVGL_UI +#endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE +#endif // __STM32F1__ diff --git a/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.h b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.h new file mode 100644 index 0000000000..6af2f9743b --- /dev/null +++ b/Marlin/src/lcd/extui/mks_ui/wifiSerial_STM32F1.h @@ -0,0 +1,77 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include +#include +#include +#include +#include +#include + +#define DEFINE_WFSERIAL(name, n) WifiSerial name(USART##n, BOARD_USART##n##_TX_PIN, BOARD_USART##n##_RX_PIN) + +class WifiSerial { + public: + uint8 wifiRxBuf[WIFI_RX_BUF_SIZE]; + + public: + WifiSerial(struct usart_dev *usart_device, uint8 tx_pin, uint8 rx_pin); + + /* Set up/tear down */ + void begin(uint32 baud); + void begin(uint32 baud,uint8_t config); + void end(); + int available(); + int read(); + int write(uint8_t); + inline void wifi_usart_irq(usart_reg_map *regs) { + /* Handling RXNEIE and TXEIE interrupts. + * RXNE signifies availability of a byte in DR. + * + * See table 198 (sec 27.4, p809) in STM document RM0008 rev 15. + * We enable RXNEIE. + */ + if ((regs->CR1 & USART_CR1_RXNEIE) && (regs->SR & USART_SR_RXNE)) { + #ifdef USART_SAFE_INSERT + /* If the buffer is full and the user defines USART_SAFE_INSERT, + * ignore new bytes. */ + rb_safe_insert(this->usart_device->rb, (uint8)regs->DR); + #else + /* By default, push bytes around in the ring buffer. */ + rb_push_insert(this->usart_device->rb, (uint8)regs->DR); + #endif + } + /* TXE signifies readiness to send a byte to DR. */ + if ((regs->CR1 & USART_CR1_TXEIE) && (regs->SR & USART_SR_TXE)) { + if (!rb_is_empty(this->usart_device->wb)) + regs->DR=rb_remove(this->usart_device->wb); + else + regs->CR1 &= ~((uint32)USART_CR1_TXEIE); // disable TXEIE + } + } + int wifi_rb_is_full(); + struct usart_dev *usart_device; + private: + uint8 tx_pin; + uint8 rx_pin; +}; diff --git a/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp b/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp index 52a877031f..1d136a4075 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifi_module.cpp @@ -51,17 +51,13 @@ #define WIFI_SET() WRITE(WIFI_RESET_PIN, HIGH); #define WIFI_RESET() WRITE(WIFI_RESET_PIN, LOW); -#define WIFI_IO1_SET() WRITE(WIFI_IO1_PIN, HIGH); -#define WIFI_IO1_RESET() WRITE(WIFI_IO1_PIN, LOW); +#define WIFI_IO1_SET() WRITE(WIFI_IO1_PIN, HIGH); +#define WIFI_IO1_RESET() WRITE(WIFI_IO1_PIN, LOW); extern uint8_t Explore_Disk (char *path , uint8_t recu_level); extern uint8_t commands_in_queue; extern uint8_t sel_id; - -int usartFifoAvailable(SZ_USART_FIFO *fifo); -int readUsartFifo(SZ_USART_FIFO *fifo, int8_t *buf, int32_t len); -int writeUsartFifo(SZ_USART_FIFO * fifo, int8_t * buf, int32_t len); extern unsigned int getTickDiff(unsigned int curTick, unsigned int lastTick); volatile SZ_USART_FIFO WifiRxFifo; @@ -79,12 +75,12 @@ extern uint8_t pause_resum; uint8_t wifi_connect_flg = 0; extern volatile uint8_t get_temp_flag; -#define WIFI_MODE 2 +#define WIFI_MODE 2 #define WIFI_AP_MODE 3 int upload_result = 0; -uint32_t upload_time = 0; +uint32_t upload_time_sec = 0; uint32_t upload_size = 0; volatile WIFI_STATE wifi_link_state; @@ -120,29 +116,19 @@ extern bool flash_dma_mode; uint32_t getWifiTick() { return millis(); } uint32_t getWifiTickDiff(int32_t lastTick, int32_t curTick) { - if (lastTick <= curTick) - return (curTick - lastTick) * TICK_CYCLE; - else - return (0xFFFFFFFF - lastTick + curTick) * TICK_CYCLE; + return (lastTick <= curTick ? curTick - lastTick : 0xFFFFFFFF - lastTick + curTick) * TICK_CYCLE; } void wifi_delay(int n) { - uint32_t begin = getWifiTick(); - uint32_t end = begin; - while (getWifiTickDiff(begin, end) < (uint32_t)n) { + const uint32_t start = getWifiTick(); + while (getWifiTickDiff(start, getWifiTick()) < (uint32_t)n) watchdog_refresh(); - end = getWifiTick(); - } } void wifi_reset() { - uint32_t start, now; - start = getWifiTick(); - now = start; + uint32_t start = getWifiTick(); WIFI_RESET(); - while (getWifiTickDiff(start, now) < 500) - now = getWifiTick(); - + while (getWifiTickDiff(start, getWifiTick()) < 500) { /* nada */ } WIFI_SET(); } @@ -154,82 +140,83 @@ void mount_file_sys(uint8_t disk_type) { } } -#include -#include -#include - -#include -#include - -#include -#include - -#include -#include -#include -#include - -void changeFlashMode(const bool dmaMode) { - if (flash_dma_mode != dmaMode) { - flash_dma_mode = dmaMode; - if (!flash_dma_mode) { - dma_disable(DMA1, DMA_CH5); - dma_clear_isr_bits(DMA1, DMA_CH4); - } - } -} - static bool longName2DosName(const char *longName, char *dosName) { - uint8_t i; - for (i = FILENAME_LENGTH; i--;) dosName[i] = '\0'; + uint8_t i = FILENAME_LENGTH; + while (i) dosName[--i] = '\0'; + while (*longName) { uint8_t c = *longName++; if (c == '.') { // For a dot... if (i == 0) return false; strcat_P(dosName, PSTR(".GCO")); - break; + return dosName[0] != '\0'; } else { - if (c < 0x21 || c == 0x7F) return false; // Check size, non-printable characters // Fail for illegal characters PGM_P p = PSTR("|<>^+=?/[];,*\"\\"); - while (const uint8_t b = pgm_read_byte(p++)) if (b == c) return false; - dosName[i++] = c + (WITHIN(c, 'a', 'z') ? 'A' - 'a' : 0); // Uppercase required for 8.3 name + while (uint8_t b = pgm_read_byte(p++)) if (b == c) return false; + if (c < 0x21 || c == 0x7F) return false; // Check size, non-printable characters + dosName[i++] = (c < 'a' || c > 'z') ? (c) : (c + ('A' - 'a')); // Uppercase required for 8.3 name } if (i >= 5) { strcat_P(dosName, PSTR("~1.GCO")); - break; + return dosName[0] != '\0'; } } return dosName[0] != '\0'; // Return true if any name was set } -static int storeRcvData(volatile uint8_t *bufToCpy, int32_t len) { - unsigned char tmpW = wifiDmaRcvFifo.write_cur; +#ifdef __STM32F1__ - if (len > UDISKBUFLEN) return 0; + #include + #include + #include - if (wifiDmaRcvFifo.state[tmpW] == udisk_buf_empty) { - memcpy((unsigned char *) wifiDmaRcvFifo.bufferAddr[tmpW], (uint8_t *)bufToCpy, len); - wifiDmaRcvFifo.state[tmpW] = udisk_buf_full; - wifiDmaRcvFifo.write_cur = (tmpW + 1) % TRANS_RCV_FIFO_BLOCK_NUM; - return 1; + #include + #include + + #include + #include + + #include + #include + #include + #include + + void changeFlashMode(const bool dmaMode) { + if (flash_dma_mode != dmaMode) { + flash_dma_mode = dmaMode; + if (!flash_dma_mode) { + dma_disable(DMA1, DMA_CH5); + dma_clear_isr_bits(DMA1, DMA_CH4); + } + } } - return 0; -} -static void esp_dma_pre() { - dma_channel_reg_map *channel_regs = dma_tube_regs(DMA1, DMA_CH5); + static int storeRcvData(volatile uint8_t *bufToCpy, int32_t len) { + unsigned char tmpW = wifiDmaRcvFifo.write_cur; + if (len > UDISKBUFLEN) return 0; + if (wifiDmaRcvFifo.state[tmpW] == udisk_buf_empty) { + memcpy((unsigned char *) wifiDmaRcvFifo.bufferAddr[tmpW], (uint8_t *)bufToCpy, len); + wifiDmaRcvFifo.state[tmpW] = udisk_buf_full; + wifiDmaRcvFifo.write_cur = (tmpW + 1) % TRANS_RCV_FIFO_BLOCK_NUM; + return 1; + } + return 0; + } - CBI32(channel_regs->CCR, 0); - channel_regs->CMAR = (uint32_t)WIFISERIAL.usart_device->rb->buf; - channel_regs->CNDTR = 0x0000; - channel_regs->CNDTR = UART_RX_BUFFER_SIZE; - DMA1->regs->IFCR = 0xF0000; - SBI32(channel_regs->CCR, 0); -} + static void esp_dma_pre() { + dma_channel_reg_map *channel_regs = dma_tube_regs(DMA1, DMA_CH5); -static void dma_ch5_irq_handle() { + CBI32(channel_regs->CCR, 0); + channel_regs->CMAR = (uint32_t)WIFISERIAL.usart_device->rb->buf; + channel_regs->CNDTR = 0x0000; + channel_regs->CNDTR = UART_RX_BUFFER_SIZE; + DMA1->regs->IFCR = 0xF0000; + SBI32(channel_regs->CCR, 0); + } + + static void dma_ch5_irq_handle() { uint8 status_bits = dma_get_isr_bits(DMA1, DMA_CH5); dma_clear_isr_bits(DMA1, DMA_CH5); if (status_bits & 0x8) { @@ -254,74 +241,329 @@ static void dma_ch5_irq_handle() { // DMA transmit half WIFI_IO1_SET(); } -} - -static void wifi_usart_dma_init() { - dma_init(DMA1); - uint32_t flags = ( DMA_MINC_MODE | DMA_TRNS_CMPLT | DMA_HALF_TRNS | DMA_TRNS_ERR); - dma_xfer_size dma_bit_size = DMA_SIZE_8BITS; - dma_setup_transfer(DMA1, DMA_CH5, &USART1_BASE->DR, dma_bit_size, - (volatile void*)WIFISERIAL.usart_device->rb->buf, dma_bit_size, flags);// Transmit buffer DMA - dma_set_priority(DMA1, DMA_CH5, DMA_PRIORITY_LOW); - dma_attach_interrupt(DMA1, DMA_CH5, &dma_ch5_irq_handle); - - dma_clear_isr_bits(DMA1, DMA_CH5); - dma_set_num_transfers(DMA1, DMA_CH5, UART_RX_BUFFER_SIZE); - - bb_peri_set_bit(&USART1_BASE->CR3, USART_CR3_DMAR_BIT, 1); - dma_enable(DMA1, DMA_CH5); // enable transmit - - for (uint8_t i = 0; i < TRANS_RCV_FIFO_BLOCK_NUM; i++) { - wifiDmaRcvFifo.bufferAddr[i] = &bmp_public_buf[1024 * i]; - wifiDmaRcvFifo.state[i] = udisk_buf_empty; } - memset(wifiDmaRcvFifo.bufferAddr[0], 0, 1024 * TRANS_RCV_FIFO_BLOCK_NUM); - wifiDmaRcvFifo.read_cur = 0; - wifiDmaRcvFifo.write_cur = 0; -} + static void wifi_usart_dma_init() { + dma_init(DMA1); + uint32_t flags = ( DMA_MINC_MODE | DMA_TRNS_CMPLT | DMA_HALF_TRNS | DMA_TRNS_ERR); + dma_xfer_size dma_bit_size = DMA_SIZE_8BITS; + dma_setup_transfer(DMA1, DMA_CH5, &USART1_BASE->DR, dma_bit_size, + (volatile void*)WIFISERIAL.usart_device->rb->buf, dma_bit_size, flags);// Transmit buffer DMA + dma_set_priority(DMA1, DMA_CH5, DMA_PRIORITY_LOW); + dma_attach_interrupt(DMA1, DMA_CH5, &dma_ch5_irq_handle); -void esp_port_begin(uint8_t interrupt) { - WifiRxFifo.uart_read_point = 0; - WifiRxFifo.uart_write_point = 0; + dma_clear_isr_bits(DMA1, DMA_CH5); + dma_set_num_transfers(DMA1, DMA_CH5, UART_RX_BUFFER_SIZE); - #if 1 + bb_peri_set_bit(&USART1_BASE->CR3, USART_CR3_DMAR_BIT, 1); + dma_enable(DMA1, DMA_CH5); // enable transmit + for (uint8_t i = 0; i < TRANS_RCV_FIFO_BLOCK_NUM; i++) { + wifiDmaRcvFifo.bufferAddr[i] = &bmp_public_buf[1024 * i]; + wifiDmaRcvFifo.state[i] = udisk_buf_empty; + } + + memset(wifiDmaRcvFifo.bufferAddr[0], 0, 1024 * TRANS_RCV_FIFO_BLOCK_NUM); + wifiDmaRcvFifo.read_cur = 0; + wifiDmaRcvFifo.write_cur = 0; + } + + void esp_port_begin(uint8_t interrupt) { + WifiRxFifo.uart_read_point = 0; + WifiRxFifo.uart_write_point = 0; #if ENABLED(MKS_WIFI_MODULE) - WIFISERIAL.end(); if (interrupt) { + WIFISERIAL.end(); for (uint16_t i = 0; i < 65535; i++) { /*nada*/ } WIFISERIAL.begin(WIFI_BAUDRATE); millis_t serial_connect_timeout = millis() + 1000UL; while (PENDING(millis(), serial_connect_timeout)) { /*nada*/ } } else { + WIFISERIAL.end(); WIFISERIAL.usart_device->regs->CR1 &= ~USART_CR1_RXNEIE; WIFISERIAL.begin(WIFI_UPLOAD_BAUDRATE); wifi_usart_dma_init(); } #endif + } - #else +#else // !__STM32F1__ - #if MKS_WIFI_MODULE - WIFISERIAL.end(); - for (uint16_t i = 0; i < 65535; i++) { /*nada*/ } - WIFISERIAL.begin(interrupt ? WIFI_BAUDRATE : WIFI_UPLOAD_BAUDRATE); - millis_t serial_connect_timeout = millis() + 1000UL; - while (PENDING(millis(), serial_connect_timeout)) { /*nada*/ } - #endif - if (!interrupt) wifi_usart_dma_init(); + DMA_HandleTypeDef wifiUsartDMArx; + void changeFlashMode(const bool dmaMode) { + if (flash_dma_mode != dmaMode) { + flash_dma_mode = dmaMode; + if (flash_dma_mode == 1) { + } + else { + } + } + } + + #ifdef STM32F1xx + + HAL_StatusTypeDef HAL_DMA_PollForTransferCustomize(DMA_HandleTypeDef *hdma, uint32_t CompleteLevel, uint32_t Timeout) { + uint32_t temp; + uint32_t tickstart = 0U; + + if (HAL_DMA_STATE_BUSY != hdma->State) { // No transfer ongoing + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + // Polling mode not supported in circular mode + if (RESET != (hdma->Instance->CCR & DMA_CCR_CIRC)) { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + // Get the level transfer complete flag + temp = (CompleteLevel == HAL_DMA_FULL_TRANSFER + ? __HAL_DMA_GET_TC_FLAG_INDEX(hdma) // Transfer Complete flag + : __HAL_DMA_GET_HT_FLAG_INDEX(hdma) // Half Transfer Complete flag + ); + + // Get tick + tickstart = HAL_GetTick(); + + while (__HAL_DMA_GET_FLAG(hdma, temp) == RESET) { + if ((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)) != RESET)) { + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); // Clear the half transfer complete flag + WIFI_IO1_SET(); + } + + if ((__HAL_DMA_GET_FLAG(hdma, __HAL_DMA_GET_TE_FLAG_INDEX(hdma)) != RESET)) { + /** + * When a DMA transfer error occurs + * A hardware clear of its EN bits is performed + * Clear all flags + */ + hdma->DmaBaseAddress->IFCR = (DMA_ISR_GIF1 << hdma->ChannelIndex); + + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TE); // Update error code + hdma->State= HAL_DMA_STATE_READY; // Change the DMA state + __HAL_UNLOCK(hdma); // Process Unlocked + return HAL_ERROR; + } + + // Check for the Timeout + if (Timeout != HAL_MAX_DELAY && (!Timeout || (HAL_GetTick() - tickstart) > Timeout)) { + SET_BIT(hdma->ErrorCode, HAL_DMA_ERROR_TIMEOUT); // Update error code + hdma->State = HAL_DMA_STATE_READY; // Change the DMA state + __HAL_UNLOCK(hdma); // Process Unlocked + return HAL_ERROR; + } + } + + if (CompleteLevel == HAL_DMA_FULL_TRANSFER) { + // Clear the transfer complete flag + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_TC_FLAG_INDEX(hdma)); + + /* The selected Channelx EN bit is cleared (DMA is disabled and + all transfers are complete) */ + hdma->State = HAL_DMA_STATE_READY; + } + else + __HAL_DMA_CLEAR_FLAG(hdma, __HAL_DMA_GET_HT_FLAG_INDEX(hdma)); // Clear the half transfer complete flag + + __HAL_UNLOCK(hdma); // Process unlocked + + return HAL_OK; + } + + #else // !STM32F1xx + + typedef struct { + __IO uint32_t ISR; //!< DMA interrupt status register + __IO uint32_t Reserved0; + __IO uint32_t IFCR; //!< DMA interrupt flag clear register + } MYDMA_Base_Registers; + + HAL_StatusTypeDef HAL_DMA_PollForTransferCustomize(DMA_HandleTypeDef *hdma, HAL_DMA_LevelCompleteTypeDef CompleteLevel, uint32_t Timeout) { + HAL_StatusTypeDef status = HAL_OK; + uint32_t mask_cpltlevel; + uint32_t tickstart = HAL_GetTick(); + uint32_t tmpisr; + + MYDMA_Base_Registers *regs; // Calculate DMA base and stream number + + if (HAL_DMA_STATE_BUSY != hdma->State) { // No transfer ongoing + hdma->ErrorCode = HAL_DMA_ERROR_NO_XFER; + __HAL_UNLOCK(hdma); + return HAL_ERROR; + } + + // Polling mode not supported in circular mode and double buffering mode + if ((hdma->Instance->CR & DMA_SxCR_CIRC) != RESET) { + hdma->ErrorCode = HAL_DMA_ERROR_NOT_SUPPORTED; + return HAL_ERROR; + } + + // Get the level transfer complete flag + mask_cpltlevel = (CompleteLevel == HAL_DMA_FULL_TRANSFER + ? DMA_FLAG_TCIF0_4 << hdma->StreamIndex // Transfer Complete flag + : DMA_FLAG_HTIF0_4 << hdma->StreamIndex // Half Transfer Complete flag + ); + + regs = (MYDMA_Base_Registers *)hdma->StreamBaseAddress; + tmpisr = regs->ISR; + + while (((tmpisr & mask_cpltlevel) == RESET) && ((hdma->ErrorCode & HAL_DMA_ERROR_TE) == RESET)) { + // Check for the Timeout (Not applicable in circular mode) + if (Timeout != HAL_MAX_DELAY) { + if (!Timeout || (HAL_GetTick() - tickstart) > Timeout) { + hdma->ErrorCode = HAL_DMA_ERROR_TIMEOUT; // Update error code + __HAL_UNLOCK(hdma); // Process Unlocked + hdma->State = HAL_DMA_STATE_READY; // Change the DMA state + return HAL_TIMEOUT; + } + } + + tmpisr = regs->ISR; // Get the ISR register value + + if ((tmpisr & (DMA_FLAG_HTIF0_4 << hdma->StreamIndex)) != RESET) { + regs->IFCR = DMA_FLAG_HTIF0_4 << hdma->StreamIndex; // Clear the Direct Mode error flag + WIFI_IO1_SET(); + } + + if ((tmpisr & (DMA_FLAG_TEIF0_4 << hdma->StreamIndex)) != RESET) { + hdma->ErrorCode |= HAL_DMA_ERROR_TE; // Update error code + regs->IFCR = DMA_FLAG_TEIF0_4 << hdma->StreamIndex; // Clear the transfer error flag + } + + if ((tmpisr & (DMA_FLAG_FEIF0_4 << hdma->StreamIndex)) != RESET) { + hdma->ErrorCode |= HAL_DMA_ERROR_FE; // Update error code + regs->IFCR = DMA_FLAG_FEIF0_4 << hdma->StreamIndex; // Clear the FIFO error flag + } + + if ((tmpisr & (DMA_FLAG_DMEIF0_4 << hdma->StreamIndex)) != RESET) { + hdma->ErrorCode |= HAL_DMA_ERROR_DME; // Update error code + regs->IFCR = DMA_FLAG_DMEIF0_4 << hdma->StreamIndex; // Clear the Direct Mode error flag + } + } + + if (hdma->ErrorCode != HAL_DMA_ERROR_NONE && (hdma->ErrorCode & HAL_DMA_ERROR_TE) != RESET) { + HAL_DMA_Abort(hdma); + regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; // Clear the half transfer and transfer complete flags + __HAL_UNLOCK(hdma); // Process Unlocked + hdma->State= HAL_DMA_STATE_READY; // Change the DMA state + return HAL_ERROR; + } + + // Get the level transfer complete flag + if (CompleteLevel == HAL_DMA_FULL_TRANSFER) { + regs->IFCR = (DMA_FLAG_HTIF0_4 | DMA_FLAG_TCIF0_4) << hdma->StreamIndex; // Clear the half transfer and transfer complete flags + __HAL_UNLOCK(hdma); // Process Unlocked + hdma->State = HAL_DMA_STATE_READY; + } + else + regs->IFCR = (DMA_FLAG_HTIF0_4) << hdma->StreamIndex; // Clear the half transfer and transfer complete flags + + return status; + } #endif -} + + static void dmaTransmitBegin() { + wifiUsartDMArx.Init.MemInc = DMA_MINC_ENABLE; + if (HAL_DMA_Init((DMA_HandleTypeDef *)&wifiUsartDMArx) != HAL_OK) + Error_Handler(); + + if (HAL_DMA_Start(&wifiUsartDMArx, (uint32_t)&(USART1->DR), (uint32_t)WIFISERIAL.wifiRxBuf, UART_RX_BUFFER_SIZE)) + Error_Handler(); + + USART1->CR1 |= USART_CR1_UE; + + SET_BIT(USART1->CR3, USART_CR3_DMAR); + WIFI_IO1_RESET(); + } + + static int storeRcvData(volatile uint8_t *bufToCpy, int32_t len) { + unsigned char tmpW = wifiDmaRcvFifo.write_cur; + + if (len > UDISKBUFLEN) return 0; + + if (wifiDmaRcvFifo.state[tmpW] == udisk_buf_empty) { + const int timeOut = 2000; //millisecond + dmaTransmitBegin(); + if (HAL_DMA_PollForTransferCustomize(&wifiUsartDMArx, HAL_DMA_FULL_TRANSFER, timeOut) == HAL_OK) { + memcpy((unsigned char *) wifiDmaRcvFifo.bufferAddr[tmpW], (uint8_t *)bufToCpy, len); + wifiDmaRcvFifo.state[tmpW] = udisk_buf_full; + wifiDmaRcvFifo.write_cur = (tmpW + 1) % TRANS_RCV_FIFO_BLOCK_NUM; + return 1; + } + } + return 0; + } + + static void wifi_usart_dma_init() { + #ifdef STM32F1xx + __HAL_RCC_DMA1_CLK_ENABLE(); + wifiUsartDMArx.Instance = DMA1_Channel5; + #else + __HAL_RCC_DMA2_CLK_ENABLE(); + wifiUsartDMArx.Instance = DMA2_Stream2; + wifiUsartDMArx.Init.Channel = DMA_CHANNEL_4; + #endif + wifiUsartDMArx.Init.Direction = DMA_PERIPH_TO_MEMORY; + wifiUsartDMArx.Init.PeriphInc = DMA_PINC_DISABLE; + wifiUsartDMArx.Init.PeriphDataAlignment = DMA_PDATAALIGN_BYTE; + wifiUsartDMArx.Init.MemDataAlignment = DMA_PDATAALIGN_BYTE; + wifiUsartDMArx.Init.Mode = DMA_NORMAL; + #ifdef STM32F4xx + wifiUsartDMArx.Init.FIFOMode = DMA_FIFOMODE_DISABLE; + #endif + wifiUsartDMArx.Init.MemInc = DMA_MINC_ENABLE; + if (HAL_DMA_Init((DMA_HandleTypeDef *)&wifiUsartDMArx) != HAL_OK) + Error_Handler(); + + if (HAL_DMA_Start(&wifiUsartDMArx, (uint32_t)&(USART1->DR), (uint32_t)WIFISERIAL.wifiRxBuf, UART_RX_BUFFER_SIZE)) + Error_Handler(); + + USART1->CR1 |= USART_CR1_UE; + + SET_BIT(USART1->CR3, USART_CR3_DMAR); // Enable Rx DMA Request + + for (uint8_t i = 0; i < TRANS_RCV_FIFO_BLOCK_NUM; i++) { + wifiDmaRcvFifo.bufferAddr[i] = &bmp_public_buf[1024 * i]; + wifiDmaRcvFifo.state[i] = udisk_buf_empty; + } + + memset(wifiDmaRcvFifo.bufferAddr[0], 0, 1024 * TRANS_RCV_FIFO_BLOCK_NUM); + wifiDmaRcvFifo.read_cur = 0; + wifiDmaRcvFifo.write_cur = 0; + } + + void esp_port_begin(uint8_t interrupt) { + WifiRxFifo.uart_read_point = 0; + WifiRxFifo.uart_write_point = 0; + + #if ENABLED(MKS_WIFI_MODULE) + if (interrupt) { + WIFISERIAL.end(); + for (uint16_t i = 0; i < 65535; i++) { /*nada*/ } + WIFISERIAL.begin(WIFI_BAUDRATE); + uint32_t serial_connect_timeout = millis() + 1000UL; + while (PENDING(millis(), serial_connect_timeout)) { /*nada*/ } + } + else { + WIFISERIAL.end(); + USART1->CR1 &= ~USART_CR1_RXNEIE; + WIFISERIAL.begin(WIFI_UPLOAD_BAUDRATE); + wifi_usart_dma_init(); + } + #endif + } + +#endif // !__STM32F1__ #if ENABLED(MKS_WIFI_MODULE) int raw_send_to_wifi(uint8_t *buf, int len) { if (buf == 0 || len <= 0) return 0; - for (int i = 0; i < len; i++) - WIFISERIAL.write(*(buf + i)); + for (int i = 0; i < len; i++) WIFISERIAL.write(*(buf + i)); return len; } @@ -336,9 +578,9 @@ int package_to_wifi(WIFI_RET_TYPE type, uint8_t *buf, int len) { uint8_t wifi_ret_tail = 0xFC; if (type == WIFI_PARA_SET) { - int data_offset = 4; - int apLen = strlen((const char *)uiCfg.wifi_name); - int keyLen = strlen((const char *)uiCfg.wifi_key); + int data_offset = 4, + apLen = strlen((const char *)uiCfg.wifi_name), + keyLen = strlen((const char *)uiCfg.wifi_key); ZERO(buf_to_wifi); index_to_wifi = 0; @@ -378,9 +620,9 @@ int package_to_wifi(WIFI_RET_TYPE type, uint8_t *buf, int len) { if (buf_to_wifi[index_to_wifi + 3] == '\n') { // mask "wait" "busy" "X:" - if (((buf_to_wifi[4] == 'w') && (buf_to_wifi[5] == 'a') && (buf_to_wifi[6] == 'i') && (buf_to_wifi[7] == 't') ) - || ((buf_to_wifi[4] == 'b') && (buf_to_wifi[5] == 'u') && (buf_to_wifi[6] == 's') && (buf_to_wifi[7] == 'y') ) - || ((buf_to_wifi[4] == 'X') && (buf_to_wifi[5] == ':') ) + if ( ((buf_to_wifi[4] == 'w') && (buf_to_wifi[5] == 'a') && (buf_to_wifi[6] == 'i') && (buf_to_wifi[7] == 't')) + || ((buf_to_wifi[4] == 'b') && (buf_to_wifi[5] == 'u') && (buf_to_wifi[6] == 's') && (buf_to_wifi[7] == 'y')) + || ((buf_to_wifi[4] == 'X') && (buf_to_wifi[5] == ':')) ) { ZERO(buf_to_wifi); index_to_wifi = 0; @@ -458,6 +700,7 @@ int package_to_wifi(WIFI_RET_TYPE type, uint8_t *buf, int len) { return 1; } + #define SEND_OK_TO_WIFI send_to_wifi((uint8_t *)"ok\r\n", strlen("ok\r\n")) int send_to_wifi(uint8_t *buf, int len) { return package_to_wifi(WIFI_TRANS_INF, buf, len); } @@ -530,15 +773,15 @@ int write_to_file(char *buf, int len) { return 0; } -#define ESP_PROTOC_HEAD (uint8_t)0xA5 -#define ESP_PROTOC_TAIL (uint8_t)0xFC +#define ESP_PROTOC_HEAD (uint8_t)0xA5 +#define ESP_PROTOC_TAIL (uint8_t)0xFC -#define ESP_TYPE_NET (uint8_t)0x0 -#define ESP_TYPE_GCODE (uint8_t)0x1 +#define ESP_TYPE_NET (uint8_t)0x0 +#define ESP_TYPE_GCODE (uint8_t)0x1 #define ESP_TYPE_FILE_FIRST (uint8_t)0x2 -#define ESP_TYPE_FILE_FRAGMENT (uint8_t)0x3 +#define ESP_TYPE_FILE_FRAGMENT (uint8_t)0x3 -#define ESP_TYPE_WIFI_LIST (uint8_t)0x4 +#define ESP_TYPE_WIFI_LIST (uint8_t)0x4 uint8_t esp_msg_buf[UART_RX_BUFFER_SIZE] = { 0 }; uint16_t esp_msg_index = 0; @@ -651,13 +894,10 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { } break; - case 21: - /*init sd card*/ - SEND_OK_TO_WIFI; - break; + case 21: SEND_OK_TO_WIFI; break; // Init SD card case 23: - /*select the file*/ + // Select the file if (uiCfg.print_state == IDLE) { int index = 0; while (tmpStr[index] == ' ') index++; @@ -747,8 +987,10 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { if (card.isFileOpen()) { //saved_feedrate_percentage = feedrate_percentage; feedrate_percentage = 100; - planner.flow_percentage[0] = 100; - planner.e_factor[0] = planner.flow_percentage[0] * 0.01f; + #if EXTRUDERS + planner.flow_percentage[0] = 100; + planner.e_factor[0] = planner.flow_percentage[0] * 0.01f; + #endif #if EXTRUDERS == 2 planner.flow_percentage[1] = 100; planner.e_factor[1] = planner.flow_percentage[1] * 0.01f; @@ -786,7 +1028,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { break; case 25: - /*pause print file*/ + // Pause print file if (uiCfg.print_state == WORKING) { stop_print_time(); @@ -806,7 +1048,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { break; case 26: - /*stop print file*/ + // Stop print file if ((uiCfg.print_state == WORKING) || (uiCfg.print_state == PAUSED) || (uiCfg.print_state == REPRINTING)) { stop_print_time(); @@ -823,7 +1065,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { break; case 27: - /*report print rate*/ + // Report print rate if ((uiCfg.print_state == WORKING) || (uiCfg.print_state == PAUSED)|| (uiCfg.print_state == REPRINTING)) { print_rate = uiCfg.totalSend; ZERO(tempBuf); @@ -833,7 +1075,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { break; case 28: - /*begin to transfer file to filesys*/ + // Begin to transfer file to filesys if (uiCfg.print_state == IDLE) { int index = 0; @@ -887,7 +1129,6 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { sprintf_P(tbuf, PSTR("%d /%d"), thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0)); const int tlen = strlen(tbuf); - sprintf_P(outBuf, PSTR("T:%s"), tbuf); outBuf += 2 + tlen; @@ -909,7 +1150,7 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { #if HAS_MULTI_HOTEND sprintf_P(outBuf, PSTR("%d /%d"), thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1)); #else - strcat_P(outBuf, PSTR("0 /0")); + strcpy_P(outBuf, PSTR("0 /0")); #endif outBuf += 4; @@ -918,17 +1159,11 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { else { sprintf_P((char *)tempBuf, PSTR("T:%d /%d B:%d /%d T0:%d /%d T1:%d /%d @:0 B@:0\r\n"), thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0), - #if HAS_HEATED_BED - thermalManager.wholeDegBed(), thermalManager.degTargetBed(), - #else - 0, 0, - #endif + TERN0(HAS_HEATED_BED, thermalManager.wholeDegBed()), + TERN0(HAS_HEATED_BED, thermalManager.degTargetBed()), thermalManager.wholeDegHotend(0), thermalManager.degTargetHotend(0), - #if HAS_MULTI_HOTEND - thermalManager.wholeDegHotend(1), thermalManager.degTargetHotend(1) - #else - 0, 0 - #endif + TERN0(HAS_MULTI_HOTEND, thermalManager.wholeDegHotend(1)), + TERN0(HAS_MULTI_HOTEND, thermalManager.degTargetHotend(1)) ); } @@ -977,11 +1212,8 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { case 998: if (uiCfg.print_state == IDLE) { - int v = atoi((char *)tmpStr); - if (v == 0) - set_cur_file_sys(0); - else if (v == 1) - set_cur_file_sys(1); + const int v = atoi((char *)tmpStr); + if (v == 0 || v == 1) set_cur_file_sys(v); wifi_ret_ack(); } break; @@ -996,18 +1228,14 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { strcat_P((char *)cmd_line, PSTR("\n")); if (espGcodeFifo.wait_tick > 5) { - uint32_t left; - if (espGcodeFifo.r > espGcodeFifo.w) - left = espGcodeFifo.r - espGcodeFifo.w - 1; - else - left = WIFI_GCODE_BUFFER_SIZE + espGcodeFifo.r - espGcodeFifo.w - 1; + const uint32_t left = espGcodeFifo.r > espGcodeFifo.w + ? espGcodeFifo.r - espGcodeFifo.w - 1 + : WIFI_GCODE_BUFFER_SIZE + espGcodeFifo.r - espGcodeFifo.w - 1; if (left >= strlen((const char *)cmd_line)) { - uint32_t index = 0; - while (index < strlen((const char *)cmd_line)) { + for (uint32_t index = 0; index < strlen((const char *)cmd_line); index++) { espGcodeFifo.Buffer[espGcodeFifo.w] = cmd_line[index] ; espGcodeFifo.w = (espGcodeFifo.w + 1) % WIFI_GCODE_BUFFER_SIZE; - index++; } if (left - WIFI_GCODE_BUFFER_LEAST_SIZE >= strlen((const char *)cmd_line)) SEND_OK_TO_WIFI; @@ -1022,18 +1250,14 @@ static void wifi_gcode_exec(uint8_t *cmd_line) { strcat_P((char *)cmd_line, PSTR("\n")); if (espGcodeFifo.wait_tick > 5) { - uint32_t left_g; - if (espGcodeFifo.r > espGcodeFifo.w) - left_g = espGcodeFifo.r - espGcodeFifo.w - 1; - else - left_g = WIFI_GCODE_BUFFER_SIZE + espGcodeFifo.r - espGcodeFifo.w - 1; + const uint32_t left_g = espGcodeFifo.r > espGcodeFifo.w + ? espGcodeFifo.r - espGcodeFifo.w - 1 + : WIFI_GCODE_BUFFER_SIZE + espGcodeFifo.r - espGcodeFifo.w - 1; if (left_g >= strlen((const char *)cmd_line)) { - uint32_t index = 0; - while (index < strlen((const char *)cmd_line)) { + for (uint32_t index = 0; index < strlen((const char *)cmd_line); index++) { espGcodeFifo.Buffer[espGcodeFifo.w] = cmd_line[index] ; espGcodeFifo.w = (espGcodeFifo.w + 1) % WIFI_GCODE_BUFFER_SIZE; - index++; } if (left_g - WIFI_GCODE_BUFFER_LEAST_SIZE >= strlen((const char *)cmd_line)) SEND_OK_TO_WIFI; @@ -1061,11 +1285,10 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) { if (msgLen <= 0) return; - // ip + // IP address sprintf_P(ipPara.ip_addr, PSTR("%d.%d.%d.%d"), msg[0], msg[1], msg[2], msg[3]); - // port - // connect state + // port connect state switch (msg[6]) { case 0x0A: wifi_link_state = WIFI_CONNECTED; break; case 0x0E: wifi_link_state = WIFI_EXCEPTION; break; @@ -1075,7 +1298,7 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) { // mode wifiPara.mode = msg[7]; - // wifi name + // WiFi name wifiNameLen = msg[8]; wifiKeyLen = msg[9 + wifiNameLen]; if (wifiNameLen < 32) { @@ -1085,7 +1308,7 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) { memset(&wifi_list.wifiConnectedName, 0, sizeof(wifi_list.wifiConnectedName)); memcpy(&wifi_list.wifiConnectedName, &msg[9], wifiNameLen); - // wifi key + // WiFi key if (wifiKeyLen < 64) { ZERO(wifiPara.keyCode); memcpy(wifiPara.keyCode, &msg[10 + wifiNameLen], wifiKeyLen); @@ -1102,7 +1325,7 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) { cloud_para.port = msg[12 + wifiNameLen + wifiKeyLen + hostLen] + (msg[13 + wifiNameLen + wifiKeyLen + hostLen] << 8); } - // id + // ID id_len = msg[14 + wifiNameLen + wifiKeyLen + hostLen]; if (id_len == 20) { ZERO(cloud_para.id); @@ -1125,10 +1348,10 @@ static void net_msg_handle(uint8_t * msg, uint16_t msgLen) { if (cfg_cloud_flag == 1) { if (((cloud_para.state >> 4) != (char)gCfgItems.cloud_enable) || (strncmp(cloud_para.hostUrl, (const char *)uiCfg.cloud_hostUrl, 96) != 0) - || (cloud_para.port != uiCfg.cloud_port)) { - package_to_wifi(WIFI_CLOUD_CFG, (uint8_t *)0, 0); - } - else cfg_cloud_flag = 0; + || (cloud_para.port != uiCfg.cloud_port) + ) package_to_wifi(WIFI_CLOUD_CFG, (uint8_t *)0, 0); + else + cfg_cloud_flag = 0; } } @@ -1366,6 +1589,7 @@ static void file_fragment_msg_handle(uint8_t * msg, uint16_t msgLen) { lastFragment = frag; if ((frag & (~FRAG_MASK)) != 0) { + wifiDmaRcvFifo.receiveEspData = false; int res = upload_file.write(public_buf, file_writer.write_index); if (res == -1) { upload_file.close(); @@ -1392,7 +1616,7 @@ static void file_fragment_msg_handle(uint8_t * msg, uint16_t msgLen) { ZERO(public_buf); file_writer.write_index = 0; file_writer.tick_end = getWifiTick(); - upload_time = getWifiTickDiff(file_writer.tick_begin, file_writer.tick_end) / 1000; + upload_time_sec = getWifiTickDiff(file_writer.tick_begin, file_writer.tick_end) / 1000; upload_size = gCfgItems.curFilesize; wifi_link_state = WIFI_CONNECTED; upload_result = 3; @@ -1540,9 +1764,16 @@ void stopEspTransfer() { WIFI_IO1_SET(); // disable dma - dma_clear_isr_bits(DMA1, DMA_CH5); - bb_peri_set_bit(&USART1_BASE->CR3, USART_CR3_DMAR_BIT, 0); - dma_disable(DMA1, DMA_CH5); + #ifdef __STM32F1__ + dma_clear_isr_bits(DMA1, DMA_CH5); + bb_peri_set_bit(&USART1_BASE->CR3, USART_CR3_DMAR_BIT, 0); + dma_disable(DMA1, DMA_CH5); + #else + // First, abort any running dma + HAL_DMA_Abort(&wifiUsartDMArx); + // DeInit objects + HAL_DMA_DeInit(&wifiUsartDMArx); + #endif wifi_delay(200); changeFlashMode(true); // Set SPI flash to use DMA mode @@ -1571,6 +1802,9 @@ void wifi_rcv_handle() { } } #else + #ifndef __STM32F1__ + if (wifiDmaRcvFifo.receiveEspData) storeRcvData(WIFISERIAL.wifiRxBuf, UART_RX_BUFFER_SIZE); + #endif len = readWifiFifo(ucStr, UART_RX_BUFFER_SIZE); #endif if (len > 0) { @@ -1582,15 +1816,16 @@ void wifi_rcv_handle() { } getDataF = 1; } - if (esp_state == TRANSFER_STORE) { - if (storeRcvData(WIFISERIAL.usart_device->rb->buf, UART_RX_BUFFER_SIZE)) { - esp_state = TRANSFERING; - esp_dma_pre(); - if (wifiTransError.flag != 0x1) WIFI_IO1_RESET(); + #ifdef __STM32F1__ + if (esp_state == TRANSFER_STORE) { + if (storeRcvData(WIFISERIAL.wifiRxBuf, UART_RX_BUFFER_SIZE)) { + esp_state = TRANSFERING; + esp_dma_pre(); + if (wifiTransError.flag != 0x1) WIFI_IO1_RESET(); + } + else WIFI_IO1_SET(); } - else - WIFI_IO1_SET(); - } + #endif } else { len = readWifiBuf((int8_t *)ucStr, UART_RX_BUFFER_SIZE); @@ -1602,6 +1837,10 @@ void wifi_rcv_handle() { esp_port_begin(0); wifi_delay(10); tick_net_time1 = 0; + #ifndef __STM32F1__ + wifiDmaRcvFifo.receiveEspData = true; + return; + #endif } if (wifiTransError.flag != 0x1) WIFI_IO1_RESET(); getDataF = 1; @@ -1612,9 +1851,8 @@ void wifi_rcv_handle() { } } - if (getDataF == 1) { + if (getDataF == 1) tick_net_time1 = getWifiTick(); - } else { tick_net_time2 = getWifiTick(); @@ -1664,74 +1902,68 @@ void mks_esp_wifi_init() { esp_state = TRANSFER_IDLE; esp_port_begin(1); - + watchdog_refresh(); wifi_reset(); #if 0 if (update_flag == 0) { res = f_open(&esp_upload.uploadFile, ESP_WEB_FIRMWARE_FILE, FA_OPEN_EXISTING | FA_READ); + if (res == FR_OK) { + f_close(&esp_upload.uploadFile); - if (res == FR_OK) { - f_close(&esp_upload.uploadFile); + wifi_delay(2000); - wifi_delay(2000); + if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) return; - if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) { - return; - } + clear_cur_ui(); - clear_cur_ui(); - - draw_dialog(DIALOG_TYPE_UPDATE_ESP_FIRMWARE); - if (wifi_upload(1) >= 0) { - - f_unlink("1:/MKS_WIFI_CUR"); - f_rename(ESP_WEB_FIRMWARE_FILE,"/MKS_WIFI_CUR"); - } - draw_return_ui(); - update_flag = 1; + draw_dialog(DIALOG_TYPE_UPDATE_ESP_FIRMWARE); + if (wifi_upload(1) >= 0) { + f_unlink("1:/MKS_WIFI_CUR"); + f_rename(ESP_WEB_FIRMWARE_FILE,"/MKS_WIFI_CUR"); } - + draw_return_ui(); + update_flag = 1; } - if (update_flag == 0) { - res = f_open(&esp_upload.uploadFile, ESP_WEB_FILE, FA_OPEN_EXISTING | FA_READ); - if (res == FR_OK) { - f_close(&esp_upload.uploadFile); + } - wifi_delay(2000); + if (update_flag == 0) { + res = f_open(&esp_upload.uploadFile, ESP_WEB_FILE, FA_OPEN_EXISTING | FA_READ); + if (res == FR_OK) { + f_close(&esp_upload.uploadFile); - if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) { - return; - } + wifi_delay(2000); - clear_cur_ui(); + if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) return; - draw_dialog(DIALOG_TYPE_UPDATE_ESP_DATA); + clear_cur_ui(); - if (wifi_upload(2) >= 0) { + draw_dialog(DIALOG_TYPE_UPDATE_ESP_DATA); - f_unlink("1:/MKS_WEB_CONTROL_CUR"); - f_rename(ESP_WEB_FILE,"/MKS_WEB_CONTROL_CUR"); - } - draw_return_ui(); + if (wifi_upload(2) >= 0) { + f_unlink("1:/MKS_WEB_CONTROL_CUR"); + f_rename(ESP_WEB_FILE,"/MKS_WEB_CONTROL_CUR"); } + draw_return_ui(); } + } #endif + wifiPara.decodeType = WIFI_DECODE_TYPE; wifiPara.baud = 115200; wifi_link_state = WIFI_NOT_CONFIG; } void mks_wifi_firmware_update() { + watchdog_refresh(); card.openFileRead((char *)ESP_FIRMWARE_FILE); if (card.isFileOpen()) { card.closefile(); wifi_delay(2000); - - if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) - return; + watchdog_refresh(); + if (usartFifoAvailable((SZ_USART_FIFO *)&WifiRxFifo) < 20) return; clear_cur_ui(); @@ -1753,12 +1985,6 @@ void mks_wifi_firmware_update() { } } -#define BUF_INC_POINTER(p) ((p + 1 == UART_FIFO_BUFFER_SIZE) ? 0:(p + 1)) - -int usartFifoAvailable(SZ_USART_FIFO *fifo) { - return WIFISERIAL.available(); -} - void get_wifi_commands() { static char wifi_line_buffer[MAX_CMD_SIZE]; static bool wifi_comment_mode = false; @@ -1836,4 +2062,6 @@ int readWifiBuf(int8_t *buf, int32_t len) { return i; } +int usartFifoAvailable(SZ_USART_FIFO *fifo) { return WIFISERIAL.available(); } + #endif // HAS_TFT_LVGL_UI && MKS_WIFI_MODULE diff --git a/Marlin/src/lcd/extui/mks_ui/wifi_module.h b/Marlin/src/lcd/extui/mks_ui/wifi_module.h index 8f64613417..709d3d1719 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifi_module.h +++ b/Marlin/src/lcd/extui/mks_ui/wifi_module.h @@ -64,6 +64,7 @@ typedef enum{ #define TRANS_RCV_FIFO_BLOCK_NUM 14 typedef struct { + bool receiveEspData; unsigned char *bufferAddr[TRANS_RCV_FIFO_BLOCK_NUM]; unsigned char *p; UDISK_DATA_BUFFER_STATE state[TRANS_RCV_FIFO_BLOCK_NUM]; @@ -191,6 +192,9 @@ void get_wifi_list_command_send(); void get_wifi_commands(); int readWifiBuf(int8_t *buf, int32_t len); void mks_wifi_firmware_update(); +int usartFifoAvailable(SZ_USART_FIFO *fifo); +int readUsartFifo(SZ_USART_FIFO *fifo, int8_t *buf, int32_t len); +void esp_port_begin(uint8_t interrupt); #ifdef __cplusplus } /* C-declarations for C++ */ diff --git a/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp b/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp index 4a8e473a5c..4a5f08edaa 100644 --- a/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp +++ b/Marlin/src/lcd/extui/mks_ui/wifi_upload.cpp @@ -40,7 +40,6 @@ extern SZ_USART_FIFO WifiRxFifo; extern int readUsartFifo(SZ_USART_FIFO *fifo, int8_t *buf, int32_t len); extern int writeUsartFifo(SZ_USART_FIFO * fifo, int8_t * buf, int32_t len); void esp_port_begin(uint8_t interrupt); -extern int usartFifoAvailable(SZ_USART_FIFO *fifo); void wifi_delay(int n); #define ARRAY_SIZE(a) sizeof(a) / sizeof((a)[0]) @@ -280,7 +279,7 @@ EspUploadResult readPacket(uint8_t op, uint32_t *valp, size_t *bodyLen, uint32_t switch (state) { case begin: // expecting frame start c = uploadPort_read(); - if (c == (uint8_t)0xC0) break; + if (c != (uint8_t)0xC0) break; state = header; needBytes = 2; break; @@ -644,10 +643,7 @@ static const uint32_t FirmwareAddress = 0x00000000, WebFilesAddress = 0x00100000 void ResetWiFiForUpload(int begin_or_end) { //#if 0 - uint32_t start, now; - - start = getWifiTick(); - now = start; + uint32_t start = getWifiTick(); if (begin_or_end == 0) { SET_OUTPUT(WIFI_IO0_PIN); @@ -657,7 +653,7 @@ void ResetWiFiForUpload(int begin_or_end) { SET_INPUT_PULLUP(WIFI_IO0_PIN); WIFI_RESET(); - while (getWifiTickDiff(start, now) < 500) now = getWifiTick(); + while (getWifiTickDiff(start, getWifiTick()) < 500) { /* nada */ } WIFI_SET(); //#endif } diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp index 71fc95ccd1..c6ae40803c 100644 --- a/Marlin/src/lcd/extui/ui_api.cpp +++ b/Marlin/src/lcd/extui/ui_api.cpp @@ -182,10 +182,10 @@ namespace ExtUI { #if HAS_HEATED_BED case BED: thermalManager.reset_bed_idle_timer(); return; #endif - #if ENABLED(HAS_HEATED_CHAMBER) + #if HAS_HEATED_CHAMBER case CHAMBER: return; // Chamber has no idle timer #endif - #if ENABLED(HAS_COOLER) + #if HAS_COOLER case COOLER: return; // Cooler has no idle timer #endif default: @@ -245,10 +245,10 @@ namespace ExtUI { bool isHeaterIdle(const heater_t heater) { #if HEATER_IDLE_HANDLER switch (heater) { - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED case BED: return thermalManager.heater_idle[thermalManager.IDLE_INDEX_BED].timed_out; #endif - #if ENABLED(HAS_HEATED_CHAMBER) + #if HAS_HEATED_CHAMBER case CHAMBER: return false; // Chamber has no idle timer #endif default: @@ -268,10 +268,10 @@ namespace ExtUI { celsius_float_t getActualTemp_celsius(const heater_t heater) { switch (heater) { - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degBed()); #endif - #if ENABLED(HAS_HEATED_CHAMBER) + #if HAS_HEATED_CHAMBER case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degChamber()); #endif default: return GET_TEMP_ADJUSTMENT(thermalManager.degHotend(heater - H0)); @@ -284,10 +284,10 @@ namespace ExtUI { celsius_float_t getTargetTemp_celsius(const heater_t heater) { switch (heater) { - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED case BED: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetBed()); #endif - #if ENABLED(HAS_HEATED_CHAMBER) + #if HAS_HEATED_CHAMBER case CHAMBER: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetChamber()); #endif default: return GET_TEMP_ADJUSTMENT(thermalManager.degTargetHotend(heater - H0)); diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h index bec78493ee..faa6c8f41a 100644 --- a/Marlin/src/lcd/extui/ui_api.h +++ b/Marlin/src/lcd/extui/ui_api.h @@ -317,7 +317,7 @@ namespace ExtUI { float getPIDValues_Ki(const extruder_t); float getPIDValues_Kd(const extruder_t); void setPIDValues(const_float_t, const_float_t , const_float_t , extruder_t); - void startPIDTune(celsius_t, extruder_t); + void startPIDTune(const celsius_t, extruder_t); #endif #if ENABLED(PIDTEMPBED) @@ -325,7 +325,7 @@ namespace ExtUI { float getBedPIDValues_Ki(); float getBedPIDValues_Kd(); void setBedPIDValues(const_float_t, const_float_t , const_float_t); - void startBedPIDTune(celsius_t); + void startBedPIDTune(const celsius_t); #endif /** diff --git a/Marlin/src/lcd/language/language_fr.h b/Marlin/src/lcd/language/language_fr.h index 5dbec298d4..78a649f626 100644 --- a/Marlin/src/lcd/language/language_fr.h +++ b/Marlin/src/lcd/language/language_fr.h @@ -60,6 +60,9 @@ namespace Language_fr { PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("Origine X auto"); PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Origine Y auto"); PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Origine Z auto"); + PROGMEM Language_Str MSG_AUTO_HOME_I = _UxGT("Origine ") LCD_STR_I _UxGT(" auto"); + PROGMEM Language_Str MSG_AUTO_HOME_J = _UxGT("Origine ") LCD_STR_J _UxGT(" auto"); + PROGMEM Language_Str MSG_AUTO_HOME_K = _UxGT("Origine ") LCD_STR_K _UxGT(" auto"); PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Align. Z auto"); PROGMEM Language_Str MSG_LEVEL_BED_HOMING = _UxGT("Origine XYZ..."); PROGMEM Language_Str MSG_LEVEL_BED_WAITING = _UxGT("Clic pour commencer"); @@ -67,6 +70,12 @@ namespace Language_fr { PROGMEM Language_Str MSG_LEVEL_BED_DONE = _UxGT("Mise à niveau OK!"); PROGMEM Language_Str MSG_Z_FADE_HEIGHT = _UxGT("Hauteur lissée"); PROGMEM Language_Str MSG_SET_HOME_OFFSETS = _UxGT("Régl. décal origine"); + PROGMEM Language_Str MSG_HOME_OFFSET_X = _UxGT("Décal. origine X"); + PROGMEM Language_Str MSG_HOME_OFFSET_Y = _UxGT("Décal. origine Y"); + PROGMEM Language_Str MSG_HOME_OFFSET_Z = _UxGT("Décal. origine Z"); + PROGMEM Language_Str MSG_HOME_OFFSET_I = _UxGT("Décal. origine ") LCD_STR_I; + PROGMEM Language_Str MSG_HOME_OFFSET_J = _UxGT("Décal. origine ") LCD_STR_J; + PROGMEM Language_Str MSG_HOME_OFFSET_K = _UxGT("Décal. origine ") LCD_STR_K; PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Décalages appliqués"); PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Régler origine"); PROGMEM Language_Str MSG_ASSISTED_TRAMMING = _UxGT("Assistant Molettes"); @@ -228,14 +237,21 @@ namespace Language_fr { PROGMEM Language_Str MSG_MOVE_X = _UxGT("Déplacer X"); PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Déplacer Y"); PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Déplacer Z"); - PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extrudeur"); - PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extrudeur *"); + PROGMEM Language_Str MSG_MOVE_I = _UxGT("Déplacer ") LCD_STR_I; + PROGMEM Language_Str MSG_MOVE_J = _UxGT("Déplacer ") LCD_STR_J; + PROGMEM Language_Str MSG_MOVE_K = _UxGT("Déplacer ") LCD_STR_K; + PROGMEM Language_Str MSG_MOVE_E = _UxGT("Extruder"); + PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Extruder *"); PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("Buse trop froide"); PROGMEM Language_Str MSG_MOVE_N_MM = _UxGT("Déplacer %smm"); PROGMEM Language_Str MSG_MOVE_01MM = _UxGT("Déplacer 0.1mm"); PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Déplacer 1mm"); PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Déplacer 10mm"); PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("Déplacer 100mm"); + PROGMEM Language_Str MSG_MOVE_0001IN = _UxGT("Déplacer 0.001\""); + PROGMEM Language_Str MSG_MOVE_001IN = _UxGT("Déplacer 0.01\""); + PROGMEM Language_Str MSG_MOVE_01IN = _UxGT("Déplacer 0.1\""); + PROGMEM Language_Str MSG_MOVE_1IN = _UxGT("Déplacer 1\""); PROGMEM Language_Str MSG_SPEED = _UxGT("Vitesse"); PROGMEM Language_Str MSG_BED_Z = _UxGT("Lit Z"); PROGMEM Language_Str MSG_NOZZLE = _UxGT("Buse"); @@ -270,11 +286,31 @@ namespace Language_fr { PROGMEM Language_Str MSG_VA_JERK = _UxGT("V") LCD_STR_A _UxGT(" jerk"); PROGMEM Language_Str MSG_VB_JERK = _UxGT("V") LCD_STR_B _UxGT(" jerk"); PROGMEM Language_Str MSG_VC_JERK = _UxGT("V") LCD_STR_C _UxGT(" jerk"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("V") LCD_STR_I _UxGT(" jerk"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("V") LCD_STR_J _UxGT(" jerk"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("V") LCD_STR_K _UxGT(" jerk"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("Ve jerk"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Vélocité"); + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Vit. Max ") LCD_STR_A; + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Vit. Max ") LCD_STR_B; + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Vit. Max ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Vit. Max ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Vit. Max ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Vit. Max ") LCD_STR_K; + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Vit. Max ") LCD_STR_E; + PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Vit. Max *"); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Déviat. jonct."); + PROGMEM Language_Str MSG_VMIN = _UxGT("Vit. Min"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Vmin course"); PROGMEM Language_Str MSG_ACCELERATION = _UxGT("Accélération"); + PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max Accél. ") LCD_STR_A; + PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max Accél. ") LCD_STR_B; + PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max Accél. ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max Accél. ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max Accél. ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max Accél. ") LCD_STR_K; + PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max Accél. ") LCD_STR_E; + PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max Accél. *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Acc.rétraction"); PROGMEM Language_Str MSG_A_TRAVEL = _UxGT("Acc.course"); PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Fréquence max"); @@ -283,6 +319,9 @@ namespace Language_fr { PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" pas/mm"); PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" pas/mm"); PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" pas/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" pas/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" pas/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" pas/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E pas/mm"); PROGMEM Language_Str MSG_EN_STEPS = _UxGT("* pas/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Température"); @@ -402,6 +441,12 @@ namespace Language_fr { PROGMEM Language_Str MSG_ZPROBE_XOFFSET = _UxGT("Décalage X"); PROGMEM Language_Str MSG_ZPROBE_YOFFSET = _UxGT("Décalage Y"); PROGMEM Language_Str MSG_ZPROBE_ZOFFSET = _UxGT("Décalage Z"); + PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Babystep X"); + PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Babystep Y"); + PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Babystep Z"); + PROGMEM Language_Str MSG_BABYSTEP_I = _UxGT("Babystep ") LCD_STR_I; + PROGMEM Language_Str MSG_BABYSTEP_J = _UxGT("Babystep ") LCD_STR_J; + PROGMEM Language_Str MSG_BABYSTEP_K = _UxGT("Babystep ") LCD_STR_K; PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("Total"); PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Butée abandon"); PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Err de chauffe"); @@ -444,6 +489,7 @@ namespace Language_fr { PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("Niveau bilinéaire"); PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("Niveau lit unifié"); PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("Niveau par grille"); + PROGMEM Language_Str MSG_MESH_DONE = _UxGT("Niveau terminé"); PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Stats. imprimante"); PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Infos carte"); PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Thermistances"); @@ -476,10 +522,13 @@ namespace Language_fr { PROGMEM Language_Str MSG_INFO_MAX_TEMP = _UxGT("Temp Max"); PROGMEM Language_Str MSG_INFO_PSU = _UxGT("Alim."); PROGMEM Language_Str MSG_DRIVE_STRENGTH = _UxGT("Puiss. moteur "); - PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z Driver %"); - PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E Driver %"); + PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("Driver X %"); + PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Driver Y %"); + PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Driver Z %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = _UxGT("Driver " AXIS4_STR " %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = _UxGT("Driver " AXIS5_STR " %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = _UxGT("Driver " AXIS6_STR " %"); + PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("Driver E %"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM sauv."); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("ERREUR CONNEXION TMC"); @@ -576,6 +625,12 @@ namespace Language_fr { PROGMEM Language_Str MSG_TMC_STEALTH_ENABLED = _UxGT("StealthChop activé"); PROGMEM Language_Str MSG_SERVICE_RESET = _UxGT("Réinit."); PROGMEM Language_Str MSG_SERVICE_IN = _UxGT(" dans:"); + PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; + PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; + PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Correction"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Lissage"); @@ -601,4 +656,7 @@ namespace Language_fr { PROGMEM Language_Str MSG_BOTTOM_RIGHT = _UxGT("Coin bas droit"); PROGMEM Language_Str MSG_CALIBRATION_COMPLETED = _UxGT("Calibration terminée"); PROGMEM Language_Str MSG_CALIBRATION_FAILED = _UxGT("Échec de l'étalonnage"); + + PROGMEM Language_Str MSG_SD_CARD = _UxGT("Carte SD"); + PROGMEM Language_Str MSG_USB_DISK = _UxGT("Clé USB"); } diff --git a/Marlin/src/lcd/language/language_hu.h b/Marlin/src/lcd/language/language_hu.h index 0c73d9a85a..d4ff151f57 100644 --- a/Marlin/src/lcd/language/language_hu.h +++ b/Marlin/src/lcd/language/language_hu.h @@ -26,11 +26,11 @@ * * LCD Menu Messages. See also https://marlinfw.org/docs/development/lcd_language.html * Hungarian translation by AntoszHUN. I am constantly improving and updating the translation. - * Translation last updated: 23/05/2021 - 20:45 + * Translation last updated: 07/07/2021 - 11:20 * * LCD Menü Üzenetek. Lásd még https://marlinfw.org/docs/development/lcd_language.html * A Magyar fordítást készítette: AntoszHUN. A fordítást folyamatosan javítom és frissítem. - * A Fordítás utolsó frissítése: 2021.05.23. - 20:45 + * A Fordítás utolsó frissítése: 2021.07.07. - 11:20 */ namespace Language_hu { @@ -66,6 +66,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_AUTO_HOME_X = _UxGT("X kezdöpont"); PROGMEM Language_Str MSG_AUTO_HOME_Y = _UxGT("Y kezdöpont"); PROGMEM Language_Str MSG_AUTO_HOME_Z = _UxGT("Z kezdöpont"); + PROGMEM Language_Str MSG_AUTO_HOME_I = _UxGT("Kezdö ") LCD_STR_I; + PROGMEM Language_Str MSG_AUTO_HOME_J = _UxGT("Kezdö ") LCD_STR_J; + PROGMEM Language_Str MSG_AUTO_HOME_K = _UxGT("Kezdö ") LCD_STR_K; PROGMEM Language_Str MSG_AUTO_Z_ALIGN = _UxGT("Auto Z-igazítás"); PROGMEM Language_Str MSG_ITERATION = _UxGT("G34 Ismétlés: %i"); PROGMEM Language_Str MSG_DECREASING_ACCURACY = _UxGT("Pontosság csökken!"); @@ -79,6 +82,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_HOME_OFFSET_X = _UxGT("X Kezdö eltol."); PROGMEM Language_Str MSG_HOME_OFFSET_Y = _UxGT("Y Kezdö eltol."); PROGMEM Language_Str MSG_HOME_OFFSET_Z = _UxGT("Z Kezdö eltol."); + PROGMEM Language_Str MSG_HOME_OFFSET_I = _UxGT("Kezdö eltol. ") LCD_STR_I; + PROGMEM Language_Str MSG_HOME_OFFSET_J = _UxGT("Kezdö eltol. ") LCD_STR_J; + PROGMEM Language_Str MSG_HOME_OFFSET_K = _UxGT("Kezdö eltol. ") LCD_STR_K; PROGMEM Language_Str MSG_HOME_OFFSETS_APPLIED = _UxGT("Eltolás beállítva."); PROGMEM Language_Str MSG_SET_ORIGIN = _UxGT("Eredeti Be"); PROGMEM Language_Str MSG_ASSISTED_TRAMMING = _UxGT("Elektromos segéd"); @@ -259,6 +265,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_MOVE_X = _UxGT("X mozgás"); PROGMEM Language_Str MSG_MOVE_Y = _UxGT("Y mozgás"); PROGMEM Language_Str MSG_MOVE_Z = _UxGT("Z mozgás"); + PROGMEM Language_Str MSG_MOVE_I = _UxGT("Mozgás ") LCD_STR_I; + PROGMEM Language_Str MSG_MOVE_J = _UxGT("Mozgás ") LCD_STR_J; + PROGMEM Language_Str MSG_MOVE_K = _UxGT("Mozgás ") LCD_STR_K; PROGMEM Language_Str MSG_MOVE_E = _UxGT("Adagoló"); PROGMEM Language_Str MSG_MOVE_EN = _UxGT("Adagoló *"); PROGMEM Language_Str MSG_HOTEND_TOO_COLD = _UxGT("A fej túl hideg"); @@ -267,9 +276,10 @@ namespace Language_hu { PROGMEM Language_Str MSG_MOVE_1MM = _UxGT("Mozgás 1mm"); PROGMEM Language_Str MSG_MOVE_10MM = _UxGT("Mozgás 10mm"); PROGMEM Language_Str MSG_MOVE_100MM = _UxGT("Mozgás 100mm"); - PROGMEM Language_Str MSG_MOVE_0001IN = _UxGT("Mozgás 0.001mm"); - PROGMEM Language_Str MSG_MOVE_001IN = _UxGT("Mozgás 0.01mm"); - PROGMEM Language_Str MSG_MOVE_01IN = _UxGT("Mozgás 0.1mm"); + PROGMEM Language_Str MSG_MOVE_0001IN = _UxGT("Mozgás 0.025mm"); + PROGMEM Language_Str MSG_MOVE_001IN = _UxGT("Mozgás 0.254mm"); + PROGMEM Language_Str MSG_MOVE_01IN = _UxGT("Mozgás 2.54mm"); + PROGMEM Language_Str MSG_MOVE_1IN = _UxGT("Mozgáá 25.4mm"); PROGMEM Language_Str MSG_SPEED = _UxGT("Sebesség"); PROGMEM Language_Str MSG_BED_Z = _UxGT("Z ágy"); PROGMEM Language_Str MSG_NOZZLE = _UxGT("Fej"); @@ -321,16 +331,22 @@ namespace Language_hu { PROGMEM Language_Str MSG_SELECT_E = _UxGT("Kiválaszt *"); PROGMEM Language_Str MSG_ACC = _UxGT("Gyorsítás"); PROGMEM Language_Str MSG_JERK = _UxGT("Rántás"); - PROGMEM Language_Str MSG_VA_JERK = LCD_STR_A _UxGT(" Ránt. seb."); - PROGMEM Language_Str MSG_VB_JERK = LCD_STR_B _UxGT(" Ránt. seb."); - PROGMEM Language_Str MSG_VC_JERK = LCD_STR_C _UxGT(" Ránt. seb."); + PROGMEM Language_Str MSG_VA_JERK = _UxGT("Seb.") LCD_STR_A _UxGT("-Rántás"); + PROGMEM Language_Str MSG_VB_JERK = _UxGT("Seb.") LCD_STR_B _UxGT("-Rántás"); + PROGMEM Language_Str MSG_VC_JERK = _UxGT("Seb.") LCD_STR_C _UxGT("-Rántás"); + PROGMEM Language_Str MSG_VI_JERK = _UxGT("Seb.") LCD_STR_I _UxGT("-Rántás"); + PROGMEM Language_Str MSG_VJ_JERK = _UxGT("Seb.") LCD_STR_J _UxGT("-Rántás"); + PROGMEM Language_Str MSG_VK_JERK = _UxGT("Seb.") LCD_STR_K _UxGT("-Rántás"); PROGMEM Language_Str MSG_VE_JERK = _UxGT("E ránt. seb."); PROGMEM Language_Str MSG_JUNCTION_DEVIATION = _UxGT("Csomopont eltérés"); PROGMEM Language_Str MSG_VELOCITY = _UxGT("Sebesség"); - PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max sebesség ") LCD_STR_A; - PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max sebesség ") LCD_STR_B; - PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max sebesség ") LCD_STR_C; - PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max sebesség ") LCD_STR_E; + PROGMEM Language_Str MSG_VMAX_A = _UxGT("Max Seb. ") LCD_STR_A; + PROGMEM Language_Str MSG_VMAX_B = _UxGT("Max Seb. ") LCD_STR_B; + PROGMEM Language_Str MSG_VMAX_C = _UxGT("Max Seb. ") LCD_STR_C; + PROGMEM Language_Str MSG_VMAX_I = _UxGT("Max Seb. ") LCD_STR_I; + PROGMEM Language_Str MSG_VMAX_J = _UxGT("Max Seb. ") LCD_STR_J; + PROGMEM Language_Str MSG_VMAX_K = _UxGT("Max Seb. ") LCD_STR_K; + PROGMEM Language_Str MSG_VMAX_E = _UxGT("Max Seb. ") LCD_STR_E; PROGMEM Language_Str MSG_VMAX_EN = _UxGT("Max sebesség *"); PROGMEM Language_Str MSG_VMIN = _UxGT("Min sebesség"); PROGMEM Language_Str MSG_VTRAV_MIN = _UxGT("Min utazó.seb."); @@ -338,6 +354,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_AMAX_A = _UxGT("Max gyors. ") LCD_STR_A; PROGMEM Language_Str MSG_AMAX_B = _UxGT("Max gyors. ") LCD_STR_B; PROGMEM Language_Str MSG_AMAX_C = _UxGT("Max gyors. ") LCD_STR_C; + PROGMEM Language_Str MSG_AMAX_I = _UxGT("Max gyors. ") LCD_STR_I; + PROGMEM Language_Str MSG_AMAX_J = _UxGT("Max gyors. ") LCD_STR_J; + PROGMEM Language_Str MSG_AMAX_K = _UxGT("Max gyors. ") LCD_STR_K; PROGMEM Language_Str MSG_AMAX_E = _UxGT("Max gyors. ") LCD_STR_E; PROGMEM Language_Str MSG_AMAX_EN = _UxGT("Max gyorsulás *"); PROGMEM Language_Str MSG_A_RETRACT = _UxGT("Visszahúzás"); @@ -345,11 +364,14 @@ namespace Language_hu { PROGMEM Language_Str MSG_XY_FREQUENCY_LIMIT = _UxGT("Max frekvencia"); PROGMEM Language_Str MSG_XY_FREQUENCY_FEEDRATE = _UxGT("Min elötolás"); PROGMEM Language_Str MSG_STEPS_PER_MM = _UxGT("Lépés/mm"); - PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" lépés/mm"); - PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" lépés/mm"); - PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" lépés/mm"); + PROGMEM Language_Str MSG_A_STEPS = LCD_STR_A _UxGT(" Lépés/mm"); + PROGMEM Language_Str MSG_B_STEPS = LCD_STR_B _UxGT(" Lépés/mm"); + PROGMEM Language_Str MSG_C_STEPS = LCD_STR_C _UxGT(" Lépés/mm"); + PROGMEM Language_Str MSG_I_STEPS = LCD_STR_I _UxGT(" Lépés/mm"); + PROGMEM Language_Str MSG_J_STEPS = LCD_STR_J _UxGT(" Lépés/mm"); + PROGMEM Language_Str MSG_K_STEPS = LCD_STR_K _UxGT(" Lépés/mm"); PROGMEM Language_Str MSG_E_STEPS = _UxGT("E lépés/mm"); - PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*lépés/mm"); + PROGMEM Language_Str MSG_EN_STEPS = _UxGT("*Lépés/mm"); PROGMEM Language_Str MSG_TEMPERATURE = _UxGT("Höfok"); PROGMEM Language_Str MSG_MOTION = _UxGT("Mozgatások"); PROGMEM Language_Str MSG_FILAMENT = _UxGT("Nyomtatószál"); @@ -481,6 +503,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_BABYSTEP_X = _UxGT("Mikrolépés X"); PROGMEM Language_Str MSG_BABYSTEP_Y = _UxGT("Mikrolépés Y"); PROGMEM Language_Str MSG_BABYSTEP_Z = _UxGT("Mikrolépés Z"); + PROGMEM Language_Str MSG_BABYSTEP_I = _UxGT("Mikrolépés ") LCD_STR_I; + PROGMEM Language_Str MSG_BABYSTEP_J = _UxGT("Mikrolépés ") LCD_STR_J; + PROGMEM Language_Str MSG_BABYSTEP_K = _UxGT("Mikrolépés ") LCD_STR_K; PROGMEM Language_Str MSG_BABYSTEP_TOTAL = _UxGT("Teljes"); PROGMEM Language_Str MSG_ENDSTOP_ABORT = _UxGT("Végállás megszakítva!"); PROGMEM Language_Str MSG_HEATING_FAILED_LCD = _UxGT("Fütés hiba!"); @@ -524,8 +549,8 @@ namespace Language_hu { PROGMEM Language_Str MSG_LINEAR_LEVELING = _UxGT("Lineáris szintezés"); PROGMEM Language_Str MSG_BILINEAR_LEVELING = _UxGT("Bilineáris szintezés"); PROGMEM Language_Str MSG_UBL_LEVELING = _UxGT("Egységes ágy szintezés"); - PROGMEM Language_Str MSG_MESH_DONE = _UxGT("Mesh probing done"); PROGMEM Language_Str MSG_MESH_LEVELING = _UxGT("Háló szintezés"); + PROGMEM Language_Str MSG_MESH_DONE = _UxGT("Háló szintezés kész"); PROGMEM Language_Str MSG_INFO_STATS_MENU = _UxGT("Statisztikák"); PROGMEM Language_Str MSG_INFO_BOARD_MENU = _UxGT("Alaplap infó"); PROGMEM Language_Str MSG_INFO_THERMISTOR_MENU = _UxGT("Termisztorok"); @@ -561,6 +586,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_DAC_PERCENT_X = _UxGT("X meghajtó %"); PROGMEM Language_Str MSG_DAC_PERCENT_Y = _UxGT("Y meghajtó %"); PROGMEM Language_Str MSG_DAC_PERCENT_Z = _UxGT("Z meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_I = AXIS4_STR _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_J = AXIS5_STR _UxGT(" Meghajtó %"); + PROGMEM Language_Str MSG_DAC_PERCENT_K = AXIS6_STR _UxGT(" Meghajtó %"); PROGMEM Language_Str MSG_DAC_PERCENT_E = _UxGT("E meghajtó %"); PROGMEM Language_Str MSG_ERROR_TMC = _UxGT("TMC CSATLAKOZÁSI HIBA"); PROGMEM Language_Str MSG_DAC_EEPROM_WRITE = _UxGT("DAC EEPROM írása"); @@ -678,6 +706,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_BACKLASH_A = LCD_STR_A; PROGMEM Language_Str MSG_BACKLASH_B = LCD_STR_B; PROGMEM Language_Str MSG_BACKLASH_C = LCD_STR_C; + PROGMEM Language_Str MSG_BACKLASH_I = LCD_STR_I; + PROGMEM Language_Str MSG_BACKLASH_J = LCD_STR_J; + PROGMEM Language_Str MSG_BACKLASH_K = LCD_STR_K; PROGMEM Language_Str MSG_BACKLASH_CORRECTION = _UxGT("Korrekció"); PROGMEM Language_Str MSG_BACKLASH_SMOOTHING = _UxGT("Simítás"); @@ -705,6 +736,9 @@ namespace Language_hu { PROGMEM Language_Str MSG_CALIBRATION_FAILED = _UxGT("Kalibrálási hiba"); PROGMEM Language_Str MSG_DRIVER_BACKWARD = _UxGT(" meghajtók hátra"); + + PROGMEM Language_Str MSG_SD_CARD = _UxGT("SD Kártya"); + PROGMEM Language_Str MSG_USB_DISK = _UxGT("USB Lemez"); } #if FAN_COUNT == 1 diff --git a/Marlin/src/lcd/language/language_zh_CN.h b/Marlin/src/lcd/language/language_zh_CN.h index 39093a7c6c..33eb7fca15 100644 --- a/Marlin/src/lcd/language/language_zh_CN.h +++ b/Marlin/src/lcd/language/language_zh_CN.h @@ -31,7 +31,7 @@ namespace Language_zh_CN { using namespace Language_en; // Inherit undefined strings from English constexpr uint8_t CHARSIZE = 3; - PROGMEM Language_Str LANGUAGE = _UxGT("简体中文"); + PROGMEM Language_Str LANGUAGE = _UxGT("Simplified Chinese"); PROGMEM Language_Str WELCOME_MSG = MACHINE_NAME _UxGT("已就绪."); //" ready." PROGMEM Language_Str MSG_MARLIN = _UxGT("马林"); diff --git a/Marlin/src/lcd/lcdprint.cpp b/Marlin/src/lcd/lcdprint.cpp index c421ef1a03..eef27dbdb4 100644 --- a/Marlin/src/lcd/lcdprint.cpp +++ b/Marlin/src/lcd/lcdprint.cpp @@ -86,7 +86,7 @@ int calculateWidth(PGM_P const pstr) { const uint8_t prop = 2; uint8_t *p = (uint8_t*)pstr; int n = 0; - + do { wchar_t ch; p = get_utf8_value_cb(p, read_byte_rom, &ch); diff --git a/Marlin/src/lcd/marlinui.cpp b/Marlin/src/lcd/marlinui.cpp index 9ab519fd92..3ced165dad 100644 --- a/Marlin/src/lcd/marlinui.cpp +++ b/Marlin/src/lcd/marlinui.cpp @@ -88,6 +88,14 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; #if HAS_MULTI_LANGUAGE uint8_t MarlinUI::language; // Initialized by settings.load() + void MarlinUI::set_language(const uint8_t lang) { + if (lang < NUM_LANGUAGES) { + language = lang; + TERN_(HAS_MARLINUI_U8GLIB, update_language_font()); + return_to_status(); + refresh(); + } + } #endif #if ENABLED(SOUND_MENU_ITEM) @@ -158,6 +166,10 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; #include "../feature/power_monitor.h" #endif + #if ENABLED(PSU_CONTROL) && defined(LED_BACKLIGHT_TIMEOUT) + #include "../feature/power.h" + #endif + #if HAS_ENCODER_ACTION volatile uint8_t MarlinUI::buttons; #if HAS_SLOW_BUTTONS @@ -826,8 +838,8 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; static uint16_t max_display_update_time = 0; millis_t ms = millis(); - #ifdef LED_BACKLIGHT_TIMEOUT - leds.update_timeout(powersupply_on); + #if ENABLED(PSU_CONTROL) && defined(LED_BACKLIGHT_TIMEOUT) + leds.update_timeout(powerManager.psu_on); #endif #if HAS_LCD_MENU @@ -976,8 +988,8 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; refresh(LCDVIEW_REDRAW_NOW); - #ifdef LED_BACKLIGHT_TIMEOUT - if (!powersupply_on) leds.reset_timeout(ms); + #if ENABLED(PSU_CONTROL) && defined(LED_BACKLIGHT_TIMEOUT) + if (!powerManager.psu_on) leds.reset_timeout(ms); #endif } @@ -1690,8 +1702,8 @@ constexpr uint8_t epps = ENCODER_PULSES_PER_STEP; case PAUSE_MESSAGE_STATUS: default: break; } - } + #endif #if ENABLED(EEPROM_SETTINGS) diff --git a/Marlin/src/lcd/marlinui.h b/Marlin/src/lcd/marlinui.h index 228edc4cf2..4f11ded53f 100644 --- a/Marlin/src/lcd/marlinui.h +++ b/Marlin/src/lcd/marlinui.h @@ -111,13 +111,13 @@ #if PREHEAT_COUNT typedef struct { - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND celsius_t hotend_temp; #endif - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED celsius_t bed_temp; #endif - #if ENABLED(HAS_FAN) + #if HAS_FAN uint16_t fan_speed; #endif } preheat_t; @@ -135,12 +135,12 @@ static int8_t constexpr e_index = 0; #endif static millis_t start_time; - #if ENABLED(IS_KINEMATIC) + #if IS_KINEMATIC static xyze_pos_t all_axes_destination; #endif public: static float menu_scale; - #if ENABLED(IS_KINEMATIC) + #if IS_KINEMATIC static float offset; #endif template @@ -200,13 +200,11 @@ public: #if HAS_MULTI_LANGUAGE static uint8_t language; - static inline void set_language(const uint8_t lang) { - if (lang < NUM_LANGUAGES) { - language = lang; - return_to_status(); - refresh(); - } - } + static void set_language(const uint8_t lang); + #endif + + #if HAS_MARLINUI_U8GLIB + static void update_language_font(); #endif #if ENABLED(SOUND_MENU_ITEM) diff --git a/Marlin/src/lcd/menu/menu_advanced.cpp b/Marlin/src/lcd/menu/menu_advanced.cpp index a6719f1847..4ae38edf24 100644 --- a/Marlin/src/lcd/menu/menu_advanced.cpp +++ b/Marlin/src/lcd/menu/menu_advanced.cpp @@ -58,7 +58,7 @@ void menu_tmc(); void menu_backlash(); -#if ENABLED(HAS_MOTOR_CURRENT_DAC) +#if HAS_MOTOR_CURRENT_DAC #include "../../feature/dac/stepper_dac.h" @@ -590,7 +590,7 @@ void menu_advanced_settings() { SUBMENU(MSG_BACKLASH, menu_backlash); #endif - #if ENABLED(HAS_MOTOR_CURRENT_DAC) + #if HAS_MOTOR_CURRENT_DAC SUBMENU(MSG_DRIVE_STRENGTH, menu_dac); #endif #if HAS_MOTOR_CURRENT_PWM diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp index 195afecc1b..e6d23b1fae 100644 --- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp +++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp @@ -105,7 +105,7 @@ void lcd_delta_settings() { START_MENU(); BACK_ITEM(MSG_DELTA_CALIBRATE); EDIT_ITEM(float52sign, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10, delta_height + 10, _recalc_delta_settings); - #define EDIT_ENDSTOP_ADJ(LABEL,N) EDIT_ITEM_P(float43, PSTR(LABEL), &delta_endstop_adj.N, -5, 5, _recalc_delta_settings) + #define EDIT_ENDSTOP_ADJ(LABEL,N) EDIT_ITEM_P(float43, PSTR(LABEL), &delta_endstop_adj.N, -5, 0, _recalc_delta_settings) EDIT_ENDSTOP_ADJ("Ex", a); EDIT_ENDSTOP_ADJ("Ey", b); EDIT_ENDSTOP_ADJ("Ez", c); diff --git a/Marlin/src/lcd/menu/menu_filament.cpp b/Marlin/src/lcd/menu/menu_filament.cpp index d70ed98aa8..53fd67dbb2 100644 --- a/Marlin/src/lcd/menu/menu_filament.cpp +++ b/Marlin/src/lcd/menu/menu_filament.cpp @@ -211,7 +211,7 @@ void menu_change_filament() { if (thermalManager.targetHotEnoughToExtrude(active_extruder)) queue.inject_P(PSTR("M600B0")); else - _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); + ui.goto_screen([]{ _menu_temp_filament_op(PAUSE_MODE_CHANGE_FILAMENT, 0); }); #endif } diff --git a/Marlin/src/lcd/menu/menu_led.cpp b/Marlin/src/lcd/menu/menu_led.cpp index 284e80c931..3261ecc658 100644 --- a/Marlin/src/lcd/menu/menu_led.cpp +++ b/Marlin/src/lcd/menu/menu_led.cpp @@ -30,6 +30,10 @@ #include "menu_item.h" +#if ENABLED(PSU_CONTROL) + #include "../../feature/power.h" +#endif + #if ENABLED(LED_CONTROL_MENU) #include "../../feature/leds/leds.h" @@ -125,12 +129,7 @@ void menu_led() { BACK_ITEM(MSG_MAIN); #if ENABLED(LED_CONTROL_MENU) - #if ENABLED(PSU_CONTROL) - extern bool powersupply_on; - #else - constexpr bool powersupply_on = true; - #endif - if (powersupply_on) { + if (TERN1(PSU_CONTROL, powerManager.psu_on)) { editable.state = leds.lights_on; EDIT_ITEM(bool, MSG_LEDS, &editable.state, leds.toggle); } diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp index 6f32ef1d60..8fce2038a3 100644 --- a/Marlin/src/lcd/menu/menu_main.cpp +++ b/Marlin/src/lcd/menu/menu_main.cpp @@ -35,6 +35,10 @@ #include "../../module/stepper.h" #include "../../sd/cardreader.h" +#if ENABLED(PSU_CONTROL) + #include "../../feature/power.h" +#endif + #if HAS_GAMES && DISABLED(LCD_INFO_MENU) #include "game/game.h" #endif @@ -385,7 +389,7 @@ void menu_main() { // Switch power on/off // #if ENABLED(PSU_CONTROL) - if (powersupply_on) + if (powerManager.psu_on) #if ENABLED(PS_OFF_CONFIRM) CONFIRM_ITEM(MSG_SWITCH_PS_OFF, MSG_YES, MSG_NO, diff --git a/Marlin/src/lcd/thermistornames.h b/Marlin/src/lcd/thermistornames.h index f9f91ac49a..4f6dd23ece 100644 --- a/Marlin/src/lcd/thermistornames.h +++ b/Marlin/src/lcd/thermistornames.h @@ -128,6 +128,8 @@ #define THERMISTOR_NAME "Pt100 1K" #elif THERMISTOR_ID == 666 #define THERMISTOR_NAME "Einstart S" +#elif THERMISTOR_ID == 2000 + #define THERMISTOR_NAME "TDK NTCG104LH104JT1" // High Temperature thermistors #elif THERMISTOR_ID == 61 diff --git a/Marlin/src/libs/vector_3.cpp b/Marlin/src/libs/vector_3.cpp index b8202217dd..4db8fb5f2e 100644 --- a/Marlin/src/libs/vector_3.cpp +++ b/Marlin/src/libs/vector_3.cpp @@ -104,9 +104,9 @@ matrix_3x3 matrix_3x3::create_from_rows(const vector_3 &row_0, const vector_3 &r //row_1.debug(PSTR("row_1")); //row_2.debug(PSTR("row_2")); matrix_3x3 new_matrix; - new_matrix.vectors[0].x = row_0.x; new_matrix.vectors[1].y = row_0.y; new_matrix.vectors[2].z = row_0.z; - new_matrix.vectors[3].x = row_1.x; new_matrix.vectors[4].y = row_1.y; new_matrix.vectors[5].z = row_1.z; - new_matrix.vectors[6].x = row_2.x; new_matrix.vectors[7].y = row_2.y; new_matrix.vectors[8].z = row_2.z; + new_matrix.vectors[0] = row_0; + new_matrix.vectors[1] = row_1; + new_matrix.vectors[2] = row_2; //new_matrix.debug(PSTR("new_matrix")); return new_matrix; } diff --git a/Marlin/src/module/delta.cpp b/Marlin/src/module/delta.cpp index 96d8841f13..992c3a09b4 100644 --- a/Marlin/src/module/delta.cpp +++ b/Marlin/src/module/delta.cpp @@ -254,6 +254,7 @@ void home_delta() { current_position.z = DIFF_TERN(HAS_BED_PROBE, delta_height + 10, probe.offset.z); line_to_current_position(homing_feedrate(Z_AXIS)); planner.synchronize(); + TERN_(SENSORLESS_PROBING,endstops.report_states()); // Re-enable stealthChop if used. Disable diag1 pin on driver. #if ENABLED(SENSORLESS_HOMING) && DISABLED(ENDSTOPS_ALWAYS_ON_DEFAULT) diff --git a/Marlin/src/module/endstops.cpp b/Marlin/src/module/endstops.cpp index 8f6827de27..420acccb58 100644 --- a/Marlin/src/module/endstops.cpp +++ b/Marlin/src/module/endstops.cpp @@ -595,9 +595,15 @@ void _O2 Endstops::report_states() { // The following routines are called from an ISR context. It could be the temperature ISR, the // endstop ISR or the Stepper ISR. -#define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX -#define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN -#define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING +#if BOTH(DELTA, SENSORLESS_PROBING) + #define _ENDSTOP(AXIS, MINMAX) AXIS ##_MAX + #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_MAX_PIN + #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_MAX_ENDSTOP_INVERTING +#else + #define _ENDSTOP(AXIS, MINMAX) AXIS ##_## MINMAX + #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN + #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING +#endif // Check endstops - Could be called from Temperature ISR! void Endstops::update() { diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp index 49b2d60b20..e48d05b09f 100644 --- a/Marlin/src/module/planner.cpp +++ b/Marlin/src/module/planner.cpp @@ -1527,6 +1527,34 @@ void Planner::check_axes_activity() { } #endif +#if ENABLED(IMPROVE_HOMING_RELIABILITY) + + void Planner::enable_stall_prevention(const bool onoff) { + static motion_state_t saved_motion_state; + if (onoff) { + saved_motion_state.acceleration.x = settings.max_acceleration_mm_per_s2[X_AXIS]; + saved_motion_state.acceleration.y = settings.max_acceleration_mm_per_s2[Y_AXIS]; + settings.max_acceleration_mm_per_s2[X_AXIS] = settings.max_acceleration_mm_per_s2[Y_AXIS] = 100; + #if ENABLED(DELTA) + saved_motion_state.acceleration.z = settings.max_acceleration_mm_per_s2[Z_AXIS]; + settings.max_acceleration_mm_per_s2[Z_AXIS] = 100; + #endif + #if HAS_CLASSIC_JERK + saved_motion_state.jerk_state = max_jerk; + max_jerk.set(0, 0 OPTARG(DELTA, 0)); + #endif + } + else { + settings.max_acceleration_mm_per_s2[X_AXIS] = saved_motion_state.acceleration.x; + settings.max_acceleration_mm_per_s2[Y_AXIS] = saved_motion_state.acceleration.y; + TERN_(DELTA, settings.max_acceleration_mm_per_s2[Z_AXIS] = saved_motion_state.acceleration.z); + TERN_(HAS_CLASSIC_JERK, max_jerk = saved_motion_state.jerk_state); + } + reset_acceleration_rates(); + } + +#endif + #if HAS_LEVELING constexpr xy_pos_t level_fulcrum = { diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h index 10114ebfc6..9b104615f6 100644 --- a/Marlin/src/module/planner.h +++ b/Marlin/src/module/planner.h @@ -281,6 +281,15 @@ typedef struct { min_travel_feedrate_mm_s; // (mm/s) M205 T - Minimum travel feedrate } planner_settings_t; +#if ENABLED(IMPROVE_HOMING_RELIABILITY) + struct motion_state_t { + TERN(DELTA, xyz_ulong_t, xy_ulong_t) acceleration; + #if HAS_CLASSIC_JERK + TERN(DELTA, xyz_float_t, xy_float_t) jerk_state; + #endif + }; +#endif + #if DISABLED(SKEW_CORRECTION) #define XY_SKEW_FACTOR 0 #define XZ_SKEW_FACTOR 0 @@ -532,6 +541,10 @@ class Planner { } #endif + #if ENABLED(IMPROVE_HOMING_RELIABILITY) + void enable_stall_prevention(const bool onoff); + #endif + #if DISABLED(NO_VOLUMETRICS) // Update multipliers based on new diameter measurements diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp index dae25feea3..d585afb8b2 100644 --- a/Marlin/src/module/probe.cpp +++ b/Marlin/src/module/probe.cpp @@ -68,7 +68,7 @@ #include "servo.h" #endif -#if ENABLED(SENSORLESS_PROBING) +#if EITHER(SENSORLESS_PROBING, SENSORLESS_HOMING) #include "stepper.h" #include "../feature/tmc_util.h" #endif @@ -92,6 +92,10 @@ xyz_pos_t Probe::offset; // Initialized by settings.load() const xy_pos_t &Probe::offset_xy = Probe::offset; #endif +#if ENABLED(SENSORLESS_PROBING) + Probe::sense_bool_t Probe::test_sensitivity; +#endif + #if ENABLED(Z_PROBE_SLED) #ifndef SLED_DOCKING_OFFSET @@ -493,11 +497,12 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) { #if ENABLED(SENSORLESS_PROBING) sensorless_t stealth_states { false }; #if ENABLED(DELTA) - stealth_states.x = tmc_enable_stallguard(stepperX); - stealth_states.y = tmc_enable_stallguard(stepperY); + if (probe.test_sensitivity.x) stealth_states.x = tmc_enable_stallguard(stepperX); // Delta watches all DIAG pins for a stall + if (probe.test_sensitivity.y) stealth_states.y = tmc_enable_stallguard(stepperY); #endif - stealth_states.z = tmc_enable_stallguard(stepperZ); + if (probe.test_sensitivity.z) stealth_states.z = tmc_enable_stallguard(stepperZ); // All machines will check Z-DIAG for stall endstops.enable(true); + set_homing_current(true); // The "homing" current also applies to probing #endif TERN_(HAS_QUIET_PROBING, set_probing_paused(true)); @@ -520,10 +525,11 @@ bool Probe::probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s) { #if ENABLED(SENSORLESS_PROBING) endstops.not_homing(); #if ENABLED(DELTA) - tmc_disable_stallguard(stepperX, stealth_states.x); - tmc_disable_stallguard(stepperY, stealth_states.y); + if (probe.test_sensitivity.x) tmc_disable_stallguard(stepperX, stealth_states.x); + if (probe.test_sensitivity.y) tmc_disable_stallguard(stepperY, stealth_states.y); #endif - tmc_disable_stallguard(stepperZ, stealth_states.z); + if (probe.test_sensitivity.z) tmc_disable_stallguard(stepperZ, stealth_states.z); + set_homing_current(false); #endif if (probe_triggered && TERN0(BLTOUCH_SLOW_MODE, bltouch.stow())) // Stow in LOW SPEED MODE on every trigger @@ -815,4 +821,95 @@ float Probe::probe_at_point(const_float_t rx, const_float_t ry, const ProbePtRai #endif // HAS_Z_SERVO_PROBE +#if EITHER(SENSORLESS_PROBING, SENSORLESS_HOMING) + + sensorless_t stealth_states { false }; + + /** + * Disable stealthChop if used. Enable diag1 pin on driver. + */ + void Probe::enable_stallguard_diag1() { + #if ENABLED(SENSORLESS_PROBING) + #if ENABLED(DELTA) + stealth_states.x = tmc_enable_stallguard(stepperX); + stealth_states.y = tmc_enable_stallguard(stepperY); + #endif + stealth_states.z = tmc_enable_stallguard(stepperZ); + endstops.enable(true); + #endif + } + + /** + * Re-enable stealthChop if used. Disable diag1 pin on driver. + */ + void Probe::disable_stallguard_diag1() { + #if ENABLED(SENSORLESS_PROBING) + endstops.not_homing(); + #if ENABLED(DELTA) + tmc_disable_stallguard(stepperX, stealth_states.x); + tmc_disable_stallguard(stepperY, stealth_states.y); + #endif + tmc_disable_stallguard(stepperZ, stealth_states.z); + #endif + } + + /** + * Change the current in the TMC drivers to N##_CURRENT_HOME. And we save the current configuration of each TMC driver. + */ + void Probe::set_homing_current(const bool onoff) { + #define HAS_CURRENT_HOME(N) (defined(N##_CURRENT_HOME) && N##_CURRENT_HOME != N##_CURRENT) + #if HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(Y) || HAS_CURRENT_HOME(Z) + #if ENABLED(DELTA) + static int16_t saved_current_X, saved_current_Y; + #endif + #if HAS_CURRENT_HOME(Z) + static int16_t saved_current_Z; + #endif + #if ((ENABLED(DELTA) && (HAS_CURRENT_HOME(X) || HAS_CURRENT_HOME(Y))) || HAS_CURRENT_HOME(Z)) + auto debug_current_on = [](PGM_P const s, const int16_t a, const int16_t b) { + if (DEBUGGING(LEVELING)) { DEBUG_ECHOPGM_P(s); DEBUG_ECHOLNPAIR(" current: ", a, " -> ", b); } + }; + #endif + if (onoff) { + #if ENABLED(DELTA) + #if HAS_CURRENT_HOME(X) + saved_current_X = stepperX.getMilliamps(); + stepperX.rms_current(X_CURRENT_HOME); + debug_current_on(PSTR("X"), saved_current_X, X_CURRENT_HOME); + #endif + #if HAS_CURRENT_HOME(Y) + saved_current_Y = stepperY.getMilliamps(); + stepperY.rms_current(Y_CURRENT_HOME); + debug_current_on(PSTR("Y"), saved_current_Y, Y_CURRENT_HOME); + #endif + #endif + #if HAS_CURRENT_HOME(Z) + saved_current_Z = stepperZ.getMilliamps(); + stepperZ.rms_current(Z_CURRENT_HOME); + debug_current_on(PSTR("Z"), saved_current_Z, Z_CURRENT_HOME); + #endif + TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(true)); + } + else { + #if ENABLED(DELTA) + #if HAS_CURRENT_HOME(X) + stepperX.rms_current(saved_current_X); + debug_current_on(PSTR("X"), X_CURRENT_HOME, saved_current_X); + #endif + #if HAS_CURRENT_HOME(Y) + stepperY.rms_current(saved_current_Y); + debug_current_on(PSTR("Y"), Y_CURRENT_HOME, saved_current_Y); + #endif + #endif + #if HAS_CURRENT_HOME(Z) + stepperZ.rms_current(saved_current_Z); + debug_current_on(PSTR("Z"), Z_CURRENT_HOME, saved_current_Z); + #endif + TERN_(IMPROVE_HOMING_RELIABILITY, planner.enable_stall_prevention(false)); + } + #endif + } + +#endif // SENSORLESS_PROBING + #endif // HAS_BED_PROBE diff --git a/Marlin/src/module/probe.h b/Marlin/src/module/probe.h index da46c830f6..62880c865f 100644 --- a/Marlin/src/module/probe.h +++ b/Marlin/src/module/probe.h @@ -56,6 +56,11 @@ class Probe { public: + #if ENABLED(SENSORLESS_PROBING) + typedef struct { bool x:1, y:1, z:1; } sense_bool_t; + static sense_bool_t test_sensitivity; + #endif + #if HAS_BED_PROBE static xyz_pos_t offset; @@ -256,6 +261,13 @@ public: static bool tare(); #endif + // Basic functions for Sensorless Homing and Probing + #if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING) + static void enable_stallguard_diag1(); + static void disable_stallguard_diag1(); + static void set_homing_current(const bool onoff); + #endif + private: static bool probe_down_to_z(const_float_t z, const_feedRate_t fr_mm_s); static void do_z_raise(const float z_raise); diff --git a/Marlin/src/module/settings.cpp b/Marlin/src/module/settings.cpp index 27ba7cbc75..cc4d69f581 100644 --- a/Marlin/src/module/settings.cpp +++ b/Marlin/src/module/settings.cpp @@ -130,7 +130,7 @@ #include "../feature/controllerfan.h" #if ENABLED(CONTROLLER_FAN_EDITABLE) - void M710_report(const bool forReplay); + void M710_report(const bool forReplay=true); #endif #if ENABLED(CASE_LIGHT_ENABLE) @@ -168,6 +168,10 @@ void M554_report(); #endif +#if EITHER(DELTA, HAS_EXTRA_ENDSTOPS) + void M666_report(const bool forReplay=true); +#endif + #define _EN_ITEM(N) , E##N typedef struct { uint16_t LINEAR_AXIS_LIST(X, Y, Z, I, J, K), X2, Y2, Z2, Z3, Z4 REPEAT(E_STEPPERS, _EN_ITEM); } tmc_stepper_current_t; @@ -3302,14 +3306,6 @@ void MarlinSettings::reset() { #elif ENABLED(DELTA) - CONFIG_ECHO_HEADING("Endstop adjustment:"); - CONFIG_ECHO_START(); - SERIAL_ECHOLNPAIR_P( - PSTR(" M666 X"), LINEAR_UNIT(delta_endstop_adj.a) - , SP_Y_STR, LINEAR_UNIT(delta_endstop_adj.b) - , SP_Z_STR, LINEAR_UNIT(delta_endstop_adj.c) - ); - CONFIG_ECHO_HEADING("Delta settings: L R H S XYZ ABC"); CONFIG_ECHO_START(); SERIAL_ECHOLNPAIR_P( @@ -3325,32 +3321,11 @@ void MarlinSettings::reset() { , PSTR(" C"), LINEAR_UNIT(delta_diagonal_rod_trim.c) ); - #elif HAS_EXTRA_ENDSTOPS + #endif - CONFIG_ECHO_HEADING("Endstop adjustment:"); - CONFIG_ECHO_START(); - SERIAL_ECHOPGM(" M666"); - #if ENABLED(X_DUAL_ENDSTOPS) - SERIAL_ECHOLNPAIR_P(SP_X_STR, LINEAR_UNIT(endstops.x2_endstop_adj)); - #endif - #if ENABLED(Y_DUAL_ENDSTOPS) - SERIAL_ECHOLNPAIR_P(SP_Y_STR, LINEAR_UNIT(endstops.y2_endstop_adj)); - #endif - #if ENABLED(Z_MULTI_ENDSTOPS) - #if NUM_Z_STEPPER_DRIVERS >= 3 - SERIAL_ECHOPAIR(" S2 Z", LINEAR_UNIT(endstops.z3_endstop_adj)); - CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M666 S3 Z", LINEAR_UNIT(endstops.z3_endstop_adj)); - #if NUM_Z_STEPPER_DRIVERS >= 4 - CONFIG_ECHO_START(); - SERIAL_ECHOPAIR(" M666 S4 Z", LINEAR_UNIT(endstops.z4_endstop_adj)); - #endif - #else - SERIAL_ECHOLNPAIR_P(SP_Z_STR, LINEAR_UNIT(endstops.z2_endstop_adj)); - #endif - #endif - - #endif // [XYZ]_DUAL_ENDSTOPS + #if EITHER(DELTA, HAS_EXTRA_ENDSTOPS) + M666_report(forReplay); + #endif #if PREHEAT_COUNT @@ -3818,10 +3793,10 @@ void MarlinSettings::reset() { SERIAL_CHAR(' ', 'B'); // B (maps to E1 by default) SERIAL_ECHOLN(stepper.motor_current_setting[4]); #endif - #elif ENABLED(HAS_MOTOR_CURRENT_I2C) // i2c-based has any number of values + #elif HAS_MOTOR_CURRENT_I2C // i2c-based has any number of values // Values sent over i2c are not stored. // Indexes map directly to drivers, not axes. - #elif ENABLED(HAS_MOTOR_CURRENT_DAC) // DAC-based has 4 values, for X Y Z (I J K) E + #elif HAS_MOTOR_CURRENT_DAC // DAC-based has 4 values, for X Y Z (I J K) E // Values sent over i2c are not stored. Uses indirect mapping. #endif diff --git a/Marlin/src/module/stepper/indirection.h b/Marlin/src/module/stepper/indirection.h index 08d0be0b31..beba03699e 100644 --- a/Marlin/src/module/stepper/indirection.h +++ b/Marlin/src/module/stepper/indirection.h @@ -44,7 +44,7 @@ #include "trinamic.h" #endif -void restore_stepper_drivers(); // Called by PSU_ON +void restore_stepper_drivers(); // Called by powerManager.power_on() void reset_stepper_drivers(); // Called by settings.load / settings.reset // X Stepper diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp index 83187259ff..f8ccc0c067 100644 --- a/Marlin/src/module/temperature.cpp +++ b/Marlin/src/module/temperature.cpp @@ -58,8 +58,8 @@ #endif // MAX TC related macros -#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && TEMP_SENSOR_REDUNDANT_SOURCE == (n))) -#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && TEMP_SENSOR_REDUNDANT_SOURCE == n)) +#define TEMP_SENSOR_IS_MAX(n, M) (ENABLED(TEMP_SENSOR_##n##_IS_MAX##M) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX##M) && REDUNDANT_TEMP_MATCH(SOURCE, E##n))) +#define TEMP_SENSOR_IS_ANY_MAX_TC(n) (ENABLED(TEMP_SENSOR_##n##_IS_MAX_TC) || (ENABLED(TEMP_SENSOR_REDUNDANT_IS_MAX_TC) && REDUNDANT_TEMP_MATCH(SOURCE, E##n))) // LIB_MAX6675 can be added to the build_flags in platformio.ini to use a user-defined library // If LIB_MAX6675 is not on the build_flags then raw SPI reads will be used. @@ -107,6 +107,24 @@ #if (TEMP_SENSOR_0_USES_SW_SPI || TEMP_SENSOR_1_USES_SW_SPI) && !HAS_MAXTC_LIBRARIES #include "../libs/private_spi.h" #define HAS_MAXTC_SW_SPI 1 + + // Define pins for SPI-based sensors + #if TEMP_SENSOR_0_USES_SW_SPI + #define SW_SPI_SCK_PIN TEMP_0_SCK_PIN + #define SW_SPI_MISO_PIN TEMP_0_MISO_PIN + #if PIN_EXISTS(TEMP_0_MOSI) + #define SW_SPI_MOSI_PIN TEMP_0_MOSI_PIN + #endif + #else + #define SW_SPI_SCK_PIN TEMP_1_SCK_PIN + #define SW_SPI_MISO_PIN TEMP_1_MISO_PIN + #if PIN_EXISTS(TEMP_1_MOSI) + #define SW_SPI_MOSI_PIN TEMP_1_MOSI_PIN + #endif + #endif + #ifndef SW_SPI_MOSI_PIN + #define SW_SPI_MOSI_PIN SD_MOSI_PIN + #endif #endif #if ENABLED(PID_EXTRUSION_SCALING) @@ -198,7 +216,8 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, // Initialize SoftSPI for non-lib Software SPI; Libraries take care of it themselves. template SoftSPI SPIclass::softSPI; - SPIclass max_tc_spi; + SPIclass max_tc_spi; + #endif #define MAXTC_INIT(n, M) \ @@ -262,7 +281,7 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, #endif #if HAS_TEMP_REDUNDANT - redundant_temp_info_t Temperature::temp_redundant; + redundant_info_t Temperature::temp_redundant; #endif #if ENABLED(AUTO_POWER_E_FANS) @@ -436,6 +455,14 @@ const char str_t_thermal_runaway[] PROGMEM = STR_T_THERMAL_RUNAWAY, probe_info_t Temperature::temp_probe; // = { 0 } #endif +#if HAS_TEMP_BOARD + board_info_t Temperature::temp_board; // = { 0 } + #if ENABLED(THERMAL_PROTECTION_BOARD) + int16_t Temperature::mintemp_raw_BOARD = TEMP_SENSOR_BOARD_RAW_LO_TEMP, + Temperature::maxtemp_raw_BOARD = TEMP_SENSOR_BOARD_RAW_HI_TEMP; + #endif +#endif + #if ENABLED(PREVENT_COLD_EXTRUSION) bool Temperature::allow_cold_extrude = false; celsius_t Temperature::extrude_min_temp = EXTRUDE_MINTEMP; @@ -937,14 +964,26 @@ void Temperature::_temp_error(const heater_id_t heater_id, PGM_P const serial_ms SERIAL_ERROR_START(); SERIAL_ECHOPGM_P(serial_msg); SERIAL_ECHOPGM(STR_STOPPED_HEATER); - if (heater_id >= 0) - SERIAL_ECHO(heater_id); - else if (TERN0(HAS_HEATED_CHAMBER, heater_id == H_CHAMBER)) - SERIAL_ECHOPGM(STR_HEATER_CHAMBER); - else if (TERN0(HAS_COOLER, heater_id == H_COOLER)) - SERIAL_ECHOPGM(STR_COOLER); - else - SERIAL_ECHOPGM(STR_HEATER_BED); + + heater_id_t real_heater_id = heater_id; + + #if HAS_TEMP_REDUNDANT + if (heater_id == H_REDUNDANT) { + SERIAL_ECHOPGM(STR_REDUNDANT); // print redundant and cascade to print target, too. + real_heater_id = (heater_id_t)HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET); + } + #endif + + switch (real_heater_id) { + OPTCODE(HAS_TEMP_COOLER, case H_COOLER: SERIAL_ECHOPGM(STR_COOLER); break) + OPTCODE(HAS_TEMP_PROBE, case H_PROBE: SERIAL_ECHOPGM(STR_PROBE); break) + OPTCODE(HAS_TEMP_BOARD, case H_BOARD: SERIAL_ECHOPGM(STR_MOTHERBOARD); break) + OPTCODE(HAS_TEMP_CHAMBER, case H_CHAMBER: SERIAL_ECHOPGM(STR_HEATER_CHAMBER); break) + OPTCODE(HAS_TEMP_BED, case H_BED: SERIAL_ECHOPGM(STR_HEATER_BED); break) + default: + if (real_heater_id >= 0) + SERIAL_ECHOLNPAIR("E", real_heater_id); + } SERIAL_EOL(); } @@ -1236,6 +1275,10 @@ void Temperature::min_temp_error(const heater_id_t heater_id) { void Temperature::manage_heater() { if (marlin_state == MF_INITIALIZING) return watchdog_refresh(); // If Marlin isn't started, at least reset the watchdog! + static bool no_reentry = false; // Prevent recursion + if (no_reentry) return; + REMEMBER(mh, no_reentry, true); + #if ENABLED(EMERGENCY_PARSER) if (emergency_parser.killed_by_M112) kill(M112_KILL_STR, nullptr, true); @@ -1299,7 +1342,7 @@ void Temperature::manage_heater() { #if HAS_TEMP_REDUNDANT // Make sure measured temperatures are close together if (ABS(degRedundantTarget() - degRedundant()) > TEMP_SENSOR_REDUNDANT_MAX_DIFF) - _temp_error((heater_id_t)TEMP_SENSOR_REDUNDANT_TARGET, PSTR(STR_REDUNDANCY), GET_TEXT(MSG_ERR_REDUNDANT_TEMP)); + _temp_error((heater_id_t)HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET), PSTR(STR_REDUNDANCY), GET_TEXT(MSG_ERR_REDUNDANT_TEMP)); #endif #if HAS_AUTO_FAN @@ -1584,7 +1627,7 @@ void Temperature::manage_heater() { #if ENABLED(FLOWMETER_SAFETY) if (cutter.enabled() && cooler.check_flow_too_low()) { cutter.disable(); - ui.flow_fault(); + TERN_(HAS_DISPLAY, ui.flow_fault()); } #endif #endif @@ -1659,6 +1702,9 @@ void Temperature::manage_heater() { #if TEMP_SENSOR_PROBE_IS_CUSTOM { true, 0, 0, PROBE_PULLUP_RESISTOR_OHMS, PROBE_RESISTANCE_25C_OHMS, 0, 0, PROBE_BETA, 0 }, #endif + #if TEMP_SENSOR_BOARD_IS_CUSTOM + { true, 0, 0, BOARD_PULLUP_RESISTOR_OHMS, BOARD_RESISTANCE_25C_OHMS, 0, 0, BOARD_BETA, 0 }, + #endif #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM { true, 0, 0, REDUNDANT_PULLUP_RESISTOR_OHMS, REDUNDANT_RESISTANCE_25C_OHMS, 0, 0, REDUNDANT_BETA, 0 }, #endif @@ -1694,6 +1740,7 @@ void Temperature::manage_heater() { TERN_(TEMP_SENSOR_CHAMBER_IS_CUSTOM, t_index == CTI_CHAMBER ? PSTR("CHAMBER") :) TERN_(TEMP_SENSOR_COOLER_IS_CUSTOM, t_index == CTI_COOLER ? PSTR("COOLER") :) TERN_(TEMP_SENSOR_PROBE_IS_CUSTOM, t_index == CTI_PROBE ? PSTR("PROBE") :) + TERN_(TEMP_SENSOR_BOARD_IS_CUSTOM, t_index == CTI_BOARD ? PSTR("BOARD") :) TERN_(TEMP_SENSOR_REDUNDANT_IS_CUSTOM, t_index == CTI_REDUNDANT ? PSTR("REDUNDANT") :) nullptr ); @@ -1929,14 +1976,32 @@ void Temperature::manage_heater() { } #endif // HAS_TEMP_PROBE +#if HAS_TEMP_BOARD + // For motherboard temperature measurement. + celsius_float_t Temperature::analog_to_celsius_board(const int16_t raw) { + #if TEMP_SENSOR_BOARD_IS_CUSTOM + return user_thermistor_to_deg_c(CTI_BOARD, raw); + #elif TEMP_SENSOR_BOARD_IS_THERMISTOR + SCAN_THERMISTOR_TABLE(TEMPTABLE_BOARD, TEMPTABLE_BOARD_LEN); + #elif TEMP_SENSOR_BOARD_IS_AD595 + return TEMP_AD595(raw); + #elif TEMP_SENSOR_BOARD_IS_AD8495 + return TEMP_AD8495(raw); + #else + UNUSED(raw); + return 0; + #endif + } +#endif // HAS_TEMP_BOARD + #if HAS_TEMP_REDUNDANT // For redundant temperature measurement. celsius_float_t Temperature::analog_to_celsius_redundant(const int16_t raw) { #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM return user_thermistor_to_deg_c(CTI_REDUNDANT, raw); - #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 0 + #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E0) return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_0.temperature((uint16_t)raw), raw * 0.25); - #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && TEMP_SENSOR_REDUNDANT_SOURCE == 1 + #elif TEMP_SENSOR_REDUNDANT_IS_MAX_TC && REDUNDANT_TEMP_MATCH(SOURCE, E1) return TERN(TEMP_SENSOR_REDUNDANT_IS_MAX31865, max31865_1.temperature((uint16_t)raw), raw * 0.25); #elif TEMP_SENSOR_REDUNDANT_IS_THERMISTOR SCAN_THERMISTOR_TABLE(TEMPTABLE_REDUNDANT, TEMPTABLE_REDUNDANT_LEN); @@ -1969,7 +2034,7 @@ void Temperature::updateTemperaturesFromRawValues() { TERN_(TEMP_SENSOR_0_IS_MAX_TC, temp_hotend[0].raw = READ_MAX_TC(0)); TERN_(TEMP_SENSOR_1_IS_MAX_TC, temp_hotend[1].raw = READ_MAX_TC(1)); - TERN_(TEMP_SENSOR_REDUNDANT_IS_MAX_TC, temp_redundant.raw = READ_MAX_TC(TEMP_SENSOR_REDUNDANT_SOURCE)); + TERN_(TEMP_SENSOR_REDUNDANT_IS_MAX_TC, temp_redundant.raw = READ_MAX_TC(HEATER_ID(TEMP_SENSOR_REDUNDANT_SOURCE))); #if HAS_HOTEND HOTEND_LOOP() temp_hotend[e].celsius = analog_to_celsius_hotend(temp_hotend[e].raw, e); @@ -1979,6 +2044,7 @@ void Temperature::updateTemperaturesFromRawValues() { TERN_(HAS_TEMP_CHAMBER, temp_chamber.celsius = analog_to_celsius_chamber(temp_chamber.raw)); TERN_(HAS_TEMP_COOLER, temp_cooler.celsius = analog_to_celsius_cooler(temp_cooler.raw)); TERN_(HAS_TEMP_PROBE, temp_probe.celsius = analog_to_celsius_probe(temp_probe.raw)); + TERN_(HAS_TEMP_BOARD, temp_board.celsius = analog_to_celsius_board(temp_board.raw)); TERN_(HAS_TEMP_REDUNDANT, temp_redundant.celsius = analog_to_celsius_redundant(temp_redundant.raw)); TERN_(FILAMENT_WIDTH_SENSOR, filwidth.update_measured_mm()); @@ -2026,23 +2092,28 @@ void Temperature::updateTemperaturesFromRawValues() { #endif // HAS_HOTEND + #define TP_CMP(S,A,B) (TEMPDIR(S) < 0 ? ((A)<(B)) : ((A)>(B))) #if ENABLED(THERMAL_PROTECTION_BED) - #define BEDCMP(A,B) (TEMPDIR(BED) < 0 ? ((A)<(B)) : ((A)>(B))) - if (BEDCMP(temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); - if (temp_bed.target > 0 && BEDCMP(mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); + if (TP_CMP(BED, temp_bed.raw, maxtemp_raw_BED)) max_temp_error(H_BED); + if (temp_bed.target > 0 && TP_CMP(BED, mintemp_raw_BED, temp_bed.raw)) min_temp_error(H_BED); #endif #if BOTH(HAS_HEATED_CHAMBER, THERMAL_PROTECTION_CHAMBER) - #define CHAMBERCMP(A,B) (TEMPDIR(CHAMBER) < 0 ? ((A)<(B)) : ((A)>(B))) - if (CHAMBERCMP(temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); - if (temp_chamber.target > 0 && CHAMBERCMP(mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); + if (TP_CMP(CHAMBER, temp_chamber.raw, maxtemp_raw_CHAMBER)) max_temp_error(H_CHAMBER); + if (temp_chamber.target > 0 && TP_CMP(CHAMBER, mintemp_raw_CHAMBER, temp_chamber.raw)) min_temp_error(H_CHAMBER); #endif #if BOTH(HAS_COOLER, THERMAL_PROTECTION_COOLER) - #define COOLERCMP(A,B) (TEMPDIR(COOLER) < 0 ? ((A)<(B)) : ((A)>(B))) - if (cutter.unitPower > 0 && COOLERCMP(temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); - if (COOLERCMP(mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); + if (cutter.unitPower > 0 && TP_CMP(COOLER, temp_cooler.raw, maxtemp_raw_COOLER)) max_temp_error(H_COOLER); + if (TP_CMP(COOLER, mintemp_raw_COOLER, temp_cooler.raw)) min_temp_error(H_COOLER); #endif + + #if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD) + if (TP_CMP(BOARD, temp_board.raw, maxtemp_raw_BOARD)) max_temp_error(H_BOARD); + if (TP_CMP(BOARD, mintemp_raw_BOARD, temp_board.raw)) min_temp_error(H_BOARD); + #endif + #undef TP_CMP + } // Temperature::updateTemperaturesFromRawValues /** @@ -2271,6 +2342,9 @@ void Temperature::init() { #if HAS_TEMP_ADC_PROBE HAL_ANALOG_SELECT(TEMP_PROBE_PIN); #endif + #if HAS_TEMP_ADC_BOARD + HAL_ANALOG_SELECT(TEMP_BOARD_PIN); + #endif #if HAS_TEMP_ADC_REDUNDANT HAL_ANALOG_SELECT(TEMP_REDUNDANT_PIN); #endif @@ -2384,6 +2458,7 @@ void Temperature::init() { #endif #endif // HAS_HOTEND + // TODO: combine these into the macros above #if HAS_HEATED_BED while (analog_to_celsius_bed(mintemp_raw_BED) < BED_MINTEMP) mintemp_raw_BED += TEMPDIR(BED) * (OVERSAMPLENR); while (analog_to_celsius_bed(maxtemp_raw_BED) > BED_MAXTEMP) maxtemp_raw_BED -= TEMPDIR(BED) * (OVERSAMPLENR); @@ -2399,18 +2474,25 @@ void Temperature::init() { while (analog_to_celsius_cooler(maxtemp_raw_COOLER) < COOLER_MAXTEMP) maxtemp_raw_COOLER -= TEMPDIR(COOLER) * (OVERSAMPLENR); #endif + #if BOTH(HAS_TEMP_BOARD, THERMAL_PROTECTION_BOARD) + while (analog_to_celsius_board(mintemp_raw_BOARD) < BOARD_MINTEMP) mintemp_raw_BOARD += TEMPDIR(BOARD) * (OVERSAMPLENR); + while (analog_to_celsius_board(maxtemp_raw_BOARD) > BOARD_MAXTEMP) maxtemp_raw_BOARD -= TEMPDIR(BOARD) * (OVERSAMPLENR); + #endif + #if HAS_TEMP_REDUNDANT temp_redundant.target = &( - #if TEMP_SENSOR_REDUNDANT_TARGET == -5 && HAS_TEMP_COOLER + #if REDUNDANT_TEMP_MATCH(TARGET, COOLER) && HAS_TEMP_COOLER temp_cooler - #elif TEMP_SENSOR_REDUNDANT_TARGET == -4 && HAS_TEMP_PROBE + #elif REDUNDANT_TEMP_MATCH(TARGET, PROBE) && HAS_TEMP_PROBE temp_probe - #elif TEMP_SENSOR_REDUNDANT_TARGET == -2 && HAS_TEMP_CHAMBER + #elif REDUNDANT_TEMP_MATCH(TARGET, BOARD) && HAS_TEMP_BOARD + temp_board + #elif REDUNDANT_TEMP_MATCH(TARGET, CHAMBER) && HAS_TEMP_CHAMBER temp_chamber - #elif TEMP_SENSOR_REDUNDANT_TARGET == -1 && HAS_TEMP_BED + #elif REDUNDANT_TEMP_MATCH(TARGET, BED) && HAS_TEMP_BED temp_bed #else - temp_hotend[TEMP_SENSOR_REDUNDANT_TARGET] + temp_hotend[HEATER_ID(TEMP_SENSOR_REDUNDANT_TARGET)] #endif ); #endif @@ -2783,6 +2865,7 @@ void Temperature::disable_all_heaters() { */ void Temperature::update_raw_temperatures() { + // TODO: can this be collapsed into a HOTEND_LOOP()? #if HAS_TEMP_ADC_0 && !TEMP_SENSOR_0_IS_MAX_TC temp_hotend[0].update(); #endif @@ -2804,6 +2887,7 @@ void Temperature::update_raw_temperatures() { TERN_(HAS_TEMP_ADC_BED, temp_bed.update()); TERN_(HAS_TEMP_ADC_CHAMBER, temp_chamber.update()); TERN_(HAS_TEMP_ADC_PROBE, temp_probe.update()); + TERN_(HAS_TEMP_ADC_BOARD, temp_board.update()); TERN_(HAS_TEMP_ADC_COOLER, temp_cooler.update()); TERN_(HAS_JOY_ADC_X, joystick.x.update()); @@ -2830,10 +2914,11 @@ void Temperature::readings_ready() { HOTEND_LOOP() temp_hotend[e].reset(); #endif - TERN_(HAS_HEATED_BED, temp_bed.reset()); - TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset()); - TERN_(HAS_TEMP_PROBE, temp_probe.reset()); - TERN_(HAS_TEMP_COOLER, temp_cooler.reset()); + TERN_(HAS_HEATED_BED, temp_bed.reset()); + TERN_(HAS_TEMP_CHAMBER, temp_chamber.reset()); + TERN_(HAS_TEMP_PROBE, temp_probe.reset()); + TERN_(HAS_TEMP_COOLER, temp_cooler.reset()); + TERN_(HAS_TEMP_BOARD, temp_board.reset()); TERN_(HAS_TEMP_REDUNDANT, temp_redundant.reset()); TERN_(HAS_JOY_ADC_X, joystick.x.reset()); @@ -3260,6 +3345,11 @@ void Temperature::isr() { case MeasureTemp_PROBE: ACCUMULATE_ADC(temp_probe); break; #endif + #if HAS_TEMP_ADC_BOARD + case PrepareTemp_BOARD: HAL_START_ADC(TEMP_BOARD_PIN); break; + case MeasureTemp_BOARD: ACCUMULATE_ADC(temp_board); break; + #endif + #if HAS_TEMP_ADC_REDUNDANT case PrepareTemp_REDUNDANT: HAL_START_ADC(TEMP_REDUNDANT_PIN); break; case MeasureTemp_REDUNDANT: ACCUMULATE_ADC(temp_redundant); break; @@ -3426,6 +3516,9 @@ void Temperature::isr() { #if HAS_TEMP_COOLER case H_COOLER: k = 'L'; break; #endif + #if HAS_TEMP_BOARD + case H_BOARD: k = 'M'; break; + #endif #if HAS_TEMP_REDUNDANT case H_REDUNDANT: k = 'R'; break; #endif @@ -3455,7 +3548,7 @@ void Temperature::isr() { OPTARG(HAS_TEMP_REDUNDANT, const bool include_r/*=false*/) ) { #if HAS_TEMP_HOTEND - print_heater_state(H_NONE, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder))); + print_heater_state(H_E0, degHotend(target_extruder), degTargetHotend(target_extruder) OPTARG(SHOW_TEMP_ADC_VALUES, rawHotendTemp(target_extruder))); #endif #if HAS_HEATED_BED print_heater_state(H_BED, degBed(), degTargetBed() OPTARG(SHOW_TEMP_ADC_VALUES, rawBedTemp())); @@ -3467,7 +3560,10 @@ void Temperature::isr() { print_heater_state(H_COOLER, degCooler(), TERN0(HAS_COOLER, degTargetCooler()) OPTARG(SHOW_TEMP_ADC_VALUES, rawCoolerTemp())); #endif #if HAS_TEMP_PROBE - print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp()) ); + print_heater_state(H_PROBE, degProbe(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawProbeTemp())); + #endif + #if HAS_TEMP_BOARD + print_heater_state(H_BOARD, degBoard(), 0 OPTARG(SHOW_TEMP_ADC_VALUES, rawBoardTemp())); #endif #if HAS_TEMP_REDUNDANT if (include_r) print_heater_state(H_REDUNDANT, degRedundant(), degRedundantTarget() OPTARG(SHOW_TEMP_ADC_VALUES, rawRedundantTemp())); diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h index 26c1dca8af..c78dfa9372 100644 --- a/Marlin/src/module/temperature.h +++ b/Marlin/src/module/temperature.h @@ -46,9 +46,13 @@ // Element identifiers. Positive values are hotends. Negative values are other heaters or coolers. typedef enum : int8_t { - H_NONE = -6, - H_COOLER, H_PROBE, H_REDUNDANT, H_CHAMBER, H_BED, - H_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 + H_REDUNDANT = HID_REDUNDANT, + H_COOLER = HID_COOLER, + H_PROBE = HID_PROBE, + H_BOARD = HID_BOARD, + H_CHAMBER = HID_CHAMBER, + H_BED = HID_BED, + H_E0 = HID_E0, H_E1, H_E2, H_E3, H_E4, H_E5, H_E6, H_E7 } heater_id_t; // PID storage @@ -105,6 +109,9 @@ enum ADCSensorState : char { #if HAS_TEMP_ADC_PROBE PrepareTemp_PROBE, MeasureTemp_PROBE, #endif + #if HAS_TEMP_ADC_BOARD + PrepareTemp_BOARD, MeasureTemp_BOARD, + #endif #if HAS_TEMP_ADC_REDUNDANT PrepareTemp_REDUNDANT, MeasureTemp_REDUNDANT, #endif @@ -192,7 +199,7 @@ typedef struct TempInfo { // A redundant temperature sensor typedef struct RedundantTempInfo : public TempInfo { temp_info_t* target; - } redundant_temp_info_t; + } redundant_info_t; #endif // A PWM heater with temperature sensor @@ -231,6 +238,9 @@ struct PIDHeaterInfo : public HeaterInfo { #elif HAS_TEMP_CHAMBER typedef temp_info_t chamber_info_t; #endif +#if HAS_TEMP_BOARD + typedef temp_info_t board_info_t; +#endif #if EITHER(HAS_COOLER, HAS_TEMP_COOLER) typedef heater_info_t cooler_info_t; #endif @@ -312,6 +322,9 @@ typedef struct { int16_t raw_min, raw_max; celsius_t mintemp, maxtemp; } temp_ra #if TEMP_SENSOR_COOLER_IS_CUSTOM CTI_COOLER, #endif + #if TEMP_SENSOR_BOARD_IS_CUSTOM + CTI_BOARD, + #endif #if TEMP_SENSOR_REDUNDANT_IS_CUSTOM CTI_REDUNDANT, #endif @@ -340,20 +353,23 @@ class Temperature { static const celsius_t hotend_maxtemp[HOTENDS]; static inline celsius_t hotend_max_target(const uint8_t e) { return hotend_maxtemp[e] - (HOTEND_OVERSHOOT); } #endif - #if ENABLED(HAS_HEATED_BED) + #if HAS_HEATED_BED static bed_info_t temp_bed; #endif - #if ENABLED(HAS_TEMP_PROBE) + #if HAS_TEMP_PROBE static probe_info_t temp_probe; #endif - #if ENABLED(HAS_TEMP_CHAMBER) + #if HAS_TEMP_CHAMBER static chamber_info_t temp_chamber; #endif - #if ENABLED(HAS_TEMP_COOLER) + #if HAS_TEMP_COOLER static cooler_info_t temp_cooler; #endif + #if HAS_TEMP_BOARD + static board_info_t temp_board; + #endif #if HAS_TEMP_REDUNDANT - static redundant_temp_info_t temp_redundant; + static redundant_info_t temp_redundant; #endif #if ENABLED(AUTO_POWER_E_FANS) @@ -450,7 +466,7 @@ class Temperature { static lpq_ptr_t lpq_ptr; #endif - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND static temp_range_t temp_range[HOTENDS]; #endif @@ -478,6 +494,10 @@ class Temperature { static int16_t mintemp_raw_COOLER, maxtemp_raw_COOLER; #endif + #if HAS_TEMP_BOARD && ENABLED(THERMAL_PROTECTION_BOARD) + static int16_t mintemp_raw_BOARD, maxtemp_raw_BOARD; + #endif + #if MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED > 1 static uint8_t consecutive_low_temperature_error[HOTENDS]; #endif @@ -486,7 +506,7 @@ class Temperature { static millis_t preheat_end_time[HOTENDS]; #endif - #if ENABLED(HAS_AUTO_FAN) + #if HAS_AUTO_FAN static millis_t next_auto_fan_check_ms; #endif @@ -551,6 +571,9 @@ class Temperature { #if HAS_TEMP_COOLER static celsius_float_t analog_to_celsius_cooler(const int16_t raw); #endif + #if HAS_TEMP_BOARD + static celsius_float_t analog_to_celsius_board(const int16_t raw); + #endif #if HAS_TEMP_REDUNDANT static celsius_float_t analog_to_celsius_redundant(const int16_t raw); #endif @@ -787,6 +810,14 @@ class Temperature { #endif #endif + #if HAS_TEMP_BOARD + #if ENABLED(SHOW_TEMP_ADC_VALUES) + static inline int16_t rawBoardTemp() { return temp_board.raw; } + #endif + static inline celsius_float_t degBoard() { return temp_board.celsius; } + static inline celsius_t wholeDegBoard() { return static_cast(temp_board.celsius + 0.5f); } + #endif + #if HAS_TEMP_REDUNDANT #if ENABLED(SHOW_TEMP_ADC_VALUES) static inline int16_t rawRedundantTemp() { return temp_redundant.raw; } @@ -920,7 +951,7 @@ class Temperature { static void checkExtruderAutoFans(); - #if ENABLED(HAS_HOTEND) + #if HAS_HOTEND static float get_pid_output_hotend(const uint8_t e); #endif #if ENABLED(PIDTEMPBED) diff --git a/Marlin/src/module/thermistor/thermistor_2000.h b/Marlin/src/module/thermistor/thermistor_2000.h new file mode 100644 index 0000000000..3815a6f256 --- /dev/null +++ b/Marlin/src/module/thermistor/thermistor_2000.h @@ -0,0 +1,60 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +// R25 = 100 KOhm, beta25 = 4550 K, 4.7 kOhm pull-up, TDK NTCG104LH104KT1 https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/info?part_no=NTCG104LH104KT1 +constexpr temp_entry_t temptable_2000[] PROGMEM = { +{ OV(313), 125 }, +{ OV(347), 120 }, +{ OV(383), 115 }, +{ OV(422), 110 }, +{ OV(463), 105 }, +{ OV(506), 100 }, +{ OV(549), 95 }, +{ OV(594), 90 }, +{ OV(638), 85 }, +{ OV(681), 80 }, +{ OV(722), 75 }, +{ OV(762), 70 }, +{ OV(799), 65 }, +{ OV(833), 60 }, +{ OV(863), 55 }, +{ OV(890), 50 }, +{ OV(914), 45 }, +{ OV(934), 40 }, +{ OV(951), 35 }, +{ OV(966), 30 }, +{ OV(978), 25 }, +{ OV(988), 20 }, +{ OV(996), 15 }, +{ OV(1002), 10 }, +{ OV(1007), 5 }, +{ OV(1012), 0 }, +{ OV(1015), -5 }, +{ OV(1017), -10 }, +{ OV(1019), -15 }, +{ OV(1020), -20 }, +{ OV(1021), -25 }, +{ OV(1022), -30 }, +{ OV(1023), -35 }, +{ OV(1023), -40 } +}; diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h index a6cd7c86df..28a1e2f90f 100644 --- a/Marlin/src/module/thermistor/thermistors.h +++ b/Marlin/src/module/thermistor/thermistors.h @@ -51,6 +51,7 @@ || TEMP_SENSOR_IS(n, CHAMBER) \ || TEMP_SENSOR_IS(n, COOLER) \ || TEMP_SENSOR_IS(n, PROBE) \ + || TEMP_SENSOR_IS(n, BOARD) \ || TEMP_SENSOR_IS(n, REDUNDANT) ) typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; @@ -200,6 +201,9 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; #if ANY_THERMISTOR_IS(1047) // Pt1000 with 4k7 pullup #include "thermistor_1047.h" #endif +#if ANY_THERMISTOR_IS(2000) // "Ultimachine Rambo TDK NTCG104LH104KT1 NTC100K motherboard Thermistor" https://product.tdk.com/en/search/sensor/ntc/chip-ntc-thermistor/info?part_no=NTCG104LH104KT1 + #include "thermistor_2000.h" +#endif #if ANY_THERMISTOR_IS(998) // User-defined table 1 #include "thermistor_998.h" #endif @@ -305,6 +309,13 @@ typedef struct { int16_t value; celsius_t celsius; } temp_entry_t; #define TEMPTABLE_PROBE_LEN 0 #endif +#if TEMP_SENSOR_BOARD > 0 + #define TEMPTABLE_BOARD TT_NAME(TEMP_SENSOR_BOARD) + #define TEMPTABLE_BOARD_LEN COUNT(TEMPTABLE_BOARD) +#else + #define TEMPTABLE_BOARD_LEN 0 +#endif + #if TEMP_SENSOR_REDUNDANT > 0 #define TEMPTABLE_REDUNDANT TT_NAME(TEMP_SENSOR_REDUNDANT) #define TEMPTABLE_REDUNDANT_LEN COUNT(TEMPTABLE_REDUNDANT) @@ -319,6 +330,7 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_ || 255 > TEMPTABLE_CHAMBER_LEN || 255 > TEMPTABLE_COOLER_LEN || 255 > TEMPTABLE_PROBE_LEN + || 255 > TEMPTABLE_BOARD_LEN || 255 > TEMPTABLE_REDUNDANT_LEN , "Temperature conversion tables over 255 entries need special consideration." ); @@ -513,6 +525,15 @@ static_assert(255 > TEMPTABLE_0_LEN || 255 > TEMPTABLE_1_LEN || 255 > TEMPTABLE_ #define TEMP_SENSOR_PROBE_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE #endif #endif +#ifndef TEMP_SENSOR_BOARD_RAW_HI_TEMP + #if TT_REVRAW(BOARD) + #define TEMP_SENSOR_BOARD_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE + #define TEMP_SENSOR_BOARD_RAW_LO_TEMP 0 + #else + #define TEMP_SENSOR_BOARD_RAW_HI_TEMP 0 + #define TEMP_SENSOR_BOARD_RAW_LO_TEMP MAX_RAW_THERMISTOR_VALUE + #endif +#endif #ifndef TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP #if TT_REVRAW(REDUNDANT) #define TEMP_SENSOR_REDUNDANT_RAW_HI_TEMP MAX_RAW_THERMISTOR_VALUE diff --git a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h index 568086e066..3930279c94 100644 --- a/Marlin/src/pins/linux/pins_RAMPS_LINUX.h +++ b/Marlin/src/pins/linux/pins_RAMPS_LINUX.h @@ -192,7 +192,7 @@ #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") #define FAN_PIN RAMPS_D9_PIN #define HEATER_BED_PIN RAMPS_D8_PIN - #if HOTENDS == 1 + #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #define FAN1_PIN MOSFET_D_PIN #else #define HEATER_1_PIN MOSFET_D_PIN diff --git a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h index f7e566e2d6..bb4c0e8000 100644 --- a/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h +++ b/Marlin/src/pins/lpc1768/pins_BTT_SKR_common.h @@ -65,7 +65,7 @@ #define TEMP_BED_PIN P0_23_A0 // A0 (T0) - (67) - TEMP_BED_PIN #endif -#if HOTENDS == 1 +#if HOTENDS == 1 && !REDUNDANT_TEMP_MATCH(SOURCE, E1) #if TEMP_SENSOR_PROBE #define TEMP_PROBE_PIN TEMP_1_PIN #elif TEMP_SENSOR_CHAMBER @@ -92,7 +92,7 @@ #ifndef HEATER_0_PIN #define HEATER_0_PIN P2_07 #endif -#if HOTENDS == 1 +#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #ifndef FAN1_PIN #define FAN1_PIN P2_04 #endif diff --git a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h index f998ecde4e..68e1389841 100644 --- a/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h +++ b/Marlin/src/pins/lpc1768/pins_MKS_SGEN_L.h @@ -202,7 +202,7 @@ // #define HEATER_BED_PIN P2_05 #define HEATER_0_PIN P2_07 -#if HOTENDS == 1 +#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #ifndef FAN1_PIN #define FAN1_PIN P2_06 #endif diff --git a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h index c25f676a08..fe7daa8cda 100644 --- a/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h +++ b/Marlin/src/pins/lpc1768/pins_RAMPS_RE_ARM.h @@ -217,7 +217,7 @@ #define FAN1_PIN RAMPS_D8_PIN #elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") #define HEATER_BED_PIN RAMPS_D8_PIN - #if HOTENDS == 1 + #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #define FAN1_PIN MOSFET_D_PIN #else #define HEATER_1_PIN MOSFET_D_PIN diff --git a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h index 970a402b30..e99c15e70e 100644 --- a/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h +++ b/Marlin/src/pins/lpc1769/pins_BTT_SKR_E3_TURBO.h @@ -165,8 +165,8 @@ // #define TEMP_0_PIN P0_24 #define TEMP_1_PIN P0_23 -//#define TEMP_2_PIN P1_30 // Onboard thermistor #define TEMP_BED_PIN P0_25 +#define TEMP_BOARD_PIN P1_30 // Onboard thermistor, NTC100K // // Heaters / Fans diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h index 1f53227553..4c773d1e76 100644 --- a/Marlin/src/pins/pins.h +++ b/Marlin/src/pins/pins.h @@ -486,17 +486,17 @@ #elif MB(MKS_ROBIN) #include "stm32f1/pins_MKS_ROBIN.h" // STM32F1 env:mks_robin env:mks_robin_maple #elif MB(MKS_ROBIN_MINI) - #include "stm32f1/pins_MKS_ROBIN_MINI.h" // STM32F1 env:mks_robin_mini + #include "stm32f1/pins_MKS_ROBIN_MINI.h" // STM32F1 env:mks_robin_mini env:mks_robin_mini_maple #elif MB(MKS_ROBIN_NANO) #include "stm32f1/pins_MKS_ROBIN_NANO.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_maple #elif MB(MKS_ROBIN_NANO_V2) #include "stm32f1/pins_MKS_ROBIN_NANO_V2.h" // STM32F1 env:mks_robin_nano35 env:mks_robin_nano35_maple #elif MB(MKS_ROBIN_LITE) - #include "stm32f1/pins_MKS_ROBIN_LITE.h" // STM32F1 env:mks_robin_lite + #include "stm32f1/pins_MKS_ROBIN_LITE.h" // STM32F1 env:mks_robin_lite env:mks_robin_lite_maple #elif MB(MKS_ROBIN_LITE3) - #include "stm32f1/pins_MKS_ROBIN_LITE3.h" // STM32F1 env:mks_robin_lite3 + #include "stm32f1/pins_MKS_ROBIN_LITE3.h" // STM32F1 env:mks_robin_lite3 env:mks_robin_lite3_maple #elif MB(MKS_ROBIN_PRO) - #include "stm32f1/pins_MKS_ROBIN_PRO.h" // STM32F1 env:mks_robin_pro + #include "stm32f1/pins_MKS_ROBIN_PRO.h" // STM32F1 env:mks_robin_pro env:mks_robin_pro_maple #elif MB(MKS_ROBIN_E3) #include "stm32f1/pins_MKS_ROBIN_E3.h" // STM32F1 env:mks_robin_e3 env:mks_robin_e3_maple #elif MB(MKS_ROBIN_E3_V1_1) @@ -506,7 +506,7 @@ #elif MB(MKS_ROBIN_E3D_V1_1) #include "stm32f1/pins_MKS_ROBIN_E3D_V1_1.h" // STM32F1 env:mks_robin_e3 #elif MB(MKS_ROBIN_E3P) - #include "stm32f1/pins_MKS_ROBIN_E3P.h" // STM32F1 env:mks_robin_e3p + #include "stm32f1/pins_MKS_ROBIN_E3P.h" // STM32F1 env:mks_robin_e3p env:mks_robin_e3p_maple #elif MB(BTT_SKR_MINI_V1_1) #include "stm32f1/pins_BTT_SKR_MINI_V1_1.h" // STM32F1 env:STM32F103RC_btt env:STM32F103RC_btt_USB env:STM32F103RC_btt_maple env:STM32F103RC_btt_USB_maple #elif MB(BTT_SKR_MINI_E3_V1_0) @@ -522,21 +522,23 @@ #elif MB(BTT_SKR_CR6) #include "stm32f1/pins_BTT_SKR_CR6.h" // STM32F1 env:STM32F103RE_btt env:STM32F103RE_btt_USB env:STM32F103RE_btt_maple env:STM32F103RE_btt_USB_maple #elif MB(JGAURORA_A5S_A1) - #include "stm32f1/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1 + #include "stm32f1/pins_JGAURORA_A5S_A1.h" // STM32F1 env:jgaurora_a5s_a1 env:jgaurora_a5s_a1_maple #elif MB(FYSETC_AIO_II) - #include "stm32f1/pins_FYSETC_AIO_II.h" // STM32F1 env:STM32F103RC_fysetc + #include "stm32f1/pins_FYSETC_AIO_II.h" // STM32F1 env:STM32F103RC_fysetc env:STM32F103RC_fysetc_maple #elif MB(FYSETC_CHEETAH) - #include "stm32f1/pins_FYSETC_CHEETAH.h" // STM32F1 env:STM32F103RC_fysetc + #include "stm32f1/pins_FYSETC_CHEETAH.h" // STM32F1 env:STM32F103RC_fysetc env:STM32F103RC_fysetc_maple #elif MB(FYSETC_CHEETAH_V12) - #include "stm32f1/pins_FYSETC_CHEETAH_V12.h" // STM32F1 env:STM32F103RC_fysetc + #include "stm32f1/pins_FYSETC_CHEETAH_V12.h" // STM32F1 env:STM32F103RC_fysetc env:STM32F103RC_fysetc_maple #elif MB(LONGER3D_LK) - #include "stm32f1/pins_LONGER3D_LK.h" // STM32F1 env:STM32F103VE_longer + #include "stm32f1/pins_LONGER3D_LK.h" // STM32F1 env:STM32F103VE_longer env:STM32F103VE_longer_maple #elif MB(CCROBOT_MEEB_3DP) #include "stm32f1/pins_CCROBOT_MEEB_3DP.h" // STM32F1 env:STM32F103RC_meeb #elif MB(CHITU3D_V5) - #include "stm32f1/pins_CHITU3D_V5.h" // STM32F1 env:chitu_f103 env:chitu_v5_gpio_init + #include "stm32f1/pins_CHITU3D_V5.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple env:chitu_v5_gpio_init env:chitu_v5_gpio_init_maple #elif MB(CHITU3D_V6) - #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 + #include "stm32f1/pins_CHITU3D_V6.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple +#elif MB(CHITU3D_V9) + #include "stm32f1/pins_CHITU3D_V9.h" // STM32F1 env:chitu_f103 env:chitu_f103_maple #elif MB(CREALITY_V4) #include "stm32f1/pins_CREALITY_V4.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple #elif MB(CREALITY_V4210) @@ -550,9 +552,9 @@ #elif MB(CREALITY_V453) #include "stm32f1/pins_CREALITY_V453.h" // STM32F1 env:STM32F103RET6_creality env:STM32F103RET6_creality_maple #elif MB(TRIGORILLA_PRO) - #include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro + #include "stm32f1/pins_TRIGORILLA_PRO.h" // STM32F1 env:trigorilla_pro env:trigorilla_pro_maple #elif MB(FLY_MINI) - #include "stm32f1/pins_FLY_MINI.h" // STM32F1 env:FLY_MINI + #include "stm32f1/pins_FLY_MINI.h" // STM32F1 env:FLY_MINI env:FLY_MINI_maple #elif MB(FLSUN_HISPEED) #include "stm32f1/pins_FLSUN_HISPEED.h" // STM32F1 env:flsun_hispeedv1 #elif MB(BEAST) @@ -594,9 +596,9 @@ #elif MB(BTT_E3_RRF) #include "stm32f4/pins_BTT_E3_RRF.h" // STM32F4 env:BIGTREE_E3_RRF #elif MB(BTT_SKR_V2_0_REV_A) - #include "stm32f4/pins_BTT_SKR_V2_0_REV_A.h" // STM32F4 env:BIGTREE_SKR_2 + #include "stm32f4/pins_BTT_SKR_V2_0_REV_A.h" // STM32F4 env:BIGTREE_SKR_2 env:BIGTREE_SKR_2_USB #elif MB(BTT_SKR_V2_0_REV_B) - #include "stm32f4/pins_BTT_SKR_V2_0_REV_B.h" // STM32F4 env:BIGTREE_SKR_2 + #include "stm32f4/pins_BTT_SKR_V2_0_REV_B.h" // STM32F4 env:BIGTREE_SKR_2 env:BIGTREE_SKR_2_USB #elif MB(BTT_OCTOPUS_V1_0) #include "stm32f4/pins_BTT_OCTOPUS_V1_0.h" // STM32F4 env:BIGTREE_OCTOPUS_V1 env:BIGTREE_OCTOPUS_V1_USB #elif MB(BTT_OCTOPUS_V1_1) diff --git a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h index fb7743605f..78465dd7a8 100644 --- a/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h +++ b/Marlin/src/pins/rambo/pins_EINSY_RAMBO.h @@ -114,10 +114,11 @@ // // Temperature Sensors // -#define TEMP_0_PIN 0 // Analog Input -#define TEMP_1_PIN 1 // Analog Input -#define TEMP_BED_PIN 2 // Analog Input -#define TEMP_PROBE_PIN 3 // Analog Input +#define TEMP_0_PIN 0 // Analog Input, Header J2 +#define TEMP_1_PIN 1 // Analog Input, Header J3 +#define TEMP_BOARD_PIN 91 // Onboard thermistor, 100k TDK NTCG104LH104JT1 +#define TEMP_BED_PIN 2 // Analog Input, Header J6 +#define TEMP_PROBE_PIN 3 // Analog Input, Header J15 // // Heaters / Fans @@ -135,9 +136,9 @@ #ifndef FAN1_PIN #ifdef MK3_FAN_PINS - #define FAN_PIN -1 + #define FAN1_PIN -1 #else - #define FAN_PIN 6 + #define FAN1_PIN 6 #endif #endif diff --git a/Marlin/src/pins/ramps/pins_DAGOMA_F5.h b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h index 07e46acfe7..8dc93c833b 100644 --- a/Marlin/src/pins/ramps/pins_DAGOMA_F5.h +++ b/Marlin/src/pins/ramps/pins_DAGOMA_F5.h @@ -51,7 +51,7 @@ // // DAC steppers // -#define HAS_MOTOR_CURRENT_DAC +#define HAS_MOTOR_CURRENT_DAC 1 #define DAC_STEPPER_ORDER { 0, 1, 2, 3 } diff --git a/Marlin/src/pins/ramps/pins_RAMPS.h b/Marlin/src/pins/ramps/pins_RAMPS.h index ed4f0057a9..2c271408b0 100644 --- a/Marlin/src/pins/ramps/pins_RAMPS.h +++ b/Marlin/src/pins/ramps/pins_RAMPS.h @@ -219,7 +219,7 @@ #define FAN1_PIN RAMPS_D8_PIN #elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") #define HEATER_BED_PIN RAMPS_D8_PIN - #if HOTENDS == 1 + #if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #define FAN1_PIN MOSFET_D_PIN #else #define HEATER_1_PIN MOSFET_D_PIN @@ -656,7 +656,7 @@ #define BEEPER_PIN EXP1_10_PIN #define BTN_ENC EXP1_09_PIN #ifndef SD_DETECT_PIN - #define SD_DETECT_PIN EXP2_04_PIN + #define SD_DETECT_PIN EXP2_04_PIN #endif #ifndef KILL_PIN diff --git a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h index 1428de31a2..5a6bba3c08 100644 --- a/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h +++ b/Marlin/src/pins/ramps/pins_RIGIDBOARD_V2.h @@ -34,7 +34,7 @@ // // I2C based DAC like on the Printrboard REVF -#define HAS_MOTOR_CURRENT_DAC +#define HAS_MOTOR_CURRENT_DAC 1 // Channels available for DAC, For Rigidboard there are 4 #define DAC_STEPPER_ORDER { 0, 1, 2, 3 } diff --git a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h index bc0d29b00a..7754fa9329 100644 --- a/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h +++ b/Marlin/src/pins/sam/pins_DUE3DOM_MINI.h @@ -68,8 +68,8 @@ // #define TEMP_0_PIN 0 // Analog Input (HOTEND0 thermistor) #define TEMP_1_PIN 2 // Analog Input (unused) -#define TEMP_2_PIN 5 // Analog Input (OnBoard thermistor beta 3950) #define TEMP_BED_PIN 1 // Analog Input (BED thermistor) +#define TEMP_BOARD_PIN 5 // Analog Input (OnBoard thermistor beta 3950) // SPI for MAX Thermocouple #if DISABLED(SDSUPPORT) diff --git a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h index 1e5df57e16..000988f530 100644 --- a/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h +++ b/Marlin/src/pins/stm32f1/pins_BTT_SKR_CR6.h @@ -172,7 +172,7 @@ // // Misc. Functions // -#define LED_CONTROL_PIN PA13 +#define CASE_LIGHT_PIN PA13 #ifndef NEOPIXEL_PIN #define NEOPIXEL_PIN PA8 @@ -185,3 +185,8 @@ #ifndef SUICIDE_PIN_INVERTING #define SUICIDE_PIN_INVERTING false #endif + +#define SUICIDE_PIN PC13 +#ifndef SUICIDE_PIN_INVERTING + #define SUICIDE_PIN_INVERTING false +#endif diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D.h b/Marlin/src/pins/stm32f1/pins_CHITU3D.h index c2025ba8c0..2d33fb9f2c 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D.h @@ -81,12 +81,7 @@ // Heaters / Fans // #define HEATER_0_PIN PD12 // HOT-END -#define HEATER_1_PIN -1 -#define HEATER_2_PIN -1 - #define HEATER_BED_PIN PG11 // HOT-BED -#define HEATER_BED2_PIN -1 // BED2 -#define HEATER_BED3_PIN -1 // BED3 #ifndef FAN_PIN #define FAN_PIN PG14 // MAIN BOARD FAN @@ -97,8 +92,8 @@ // // Temperature Sensors // -#define TEMP_BED_PIN PA0 // Analog Input #define TEMP_0_PIN PA1 // Analog Input +#define TEMP_BED_PIN PA0 // Analog Input // // LCD Pins diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h index 8f5893e3b9..afe58df803 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V5.h @@ -21,150 +21,8 @@ */ #pragma once -#include "env_validate.h" +#define BOARD_INFO_NAME "Chitu3D V5" -/** - * 2017 Victor Perez Marlin for stm32f1 test - */ +#define Z_STOP_PIN PG9 -#define BOARD_INFO_NAME "Chitu3D V5" -#define DEFAULT_MACHINE_NAME "STM32F103ZET6" - -#define BOARD_NO_NATIVE_USB - -#define DISABLE_JTAG - -// -// EEPROM -// -#define FLASH_EEPROM_EMULATION -#if ENABLED(FLASH_EEPROM_EMULATION) - // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) - #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) - #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) - #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE -#else - #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM -#endif - -// -// Limit Switches -// -#define X_STOP_PIN PG10 -#define Y_STOP_PIN PA12 -#define Z_STOP_PIN PA14 - -// -// Steppers -// -#define X_ENABLE_PIN PC13 -#define X_STEP_PIN PE5 -#define X_DIR_PIN PE6 - -#define Y_ENABLE_PIN PE4 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 - -#define Z_ENABLE_PIN PE1 -#define Z_STEP_PIN PB9 -#define Z_DIR_PIN PE0 - -#define E0_ENABLE_PIN PB8 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB5 - -#define E1_ENABLE_PIN PG8 -#define E1_STEP_PIN PC7 -#define E1_DIR_PIN PC6 - -// -// Temperature Sensors -// -#define TEMP_0_PIN PA1 // TH1 -#define TEMP_BED_PIN PA0 // TB1 - -// -// Heaters -// -#define HEATER_0_PIN PG12 // HEATER1 -#define HEATER_BED_PIN PG11 // HOT BED - -// -// Fans -// -#define CONTROLLER_FAN_PIN PD6 // BOARD FAN -#define FAN_PIN PG13 // FAN -#define FAN2_PIN PG14 - -// -// Misc -// -#define BEEPER_PIN PB0 -//#define LED_PIN -1 -//#define POWER_LOSS_PIN -1 -#define FIL_RUNOUT_PIN PA15 - -// SPI Flash -#define HAS_SPI_FLASH 1 -#if HAS_SPI_FLASH - #define SPI_FLASH_SIZE 0x200000 // 2MB -#endif - -// SPI 2 -#define W25QXX_CS_PIN PB12 -#define W25QXX_MOSI_PIN PB15 -#define W25QXX_MISO_PIN PB14 -#define W25QXX_SCK_PIN PB13 - -// -// TronXY TFT Support -// - -#if HAS_FSMC_TFT - - // Shared FSMC - - #define TOUCH_CS_PIN PB7 // SPI1_NSS - #define TOUCH_SCK_PIN PA5 // SPI1_SCK - #define TOUCH_MISO_PIN PA6 // SPI1_MISO - #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI - - #define TFT_RESET_PIN PF11 - #define TFT_BACKLIGHT_PIN PD13 - - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 - #define FSMC_RS_PIN PD11 - #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 - -#endif - -#if ENABLED(TFT_LVGL_UI) - // LVGL - #define HAS_SPI_FLASH_FONT 1 - #define HAS_GCODE_PREVIEW 1 - #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 - #define HAS_LANG_SELECT_SCREEN 1 - #define HAS_BAK_VIEW_IN_FLASH 0 - #define HAS_LOGO_IN_FLASH 0 -#elif ENABLED(TFT_COLOR_UI) - // Color UI - #define TFT_BUFFER_SIZE 14400 -#endif - -// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available -// Needs to use SPI2 -#define SPI_DEVICE 2 -#define SD_SCK_PIN PB13 -#define SD_MISO_PIN PB14 -#define SD_MOSI_PIN PB15 -#define SD_SS_PIN PB12 - -// -// SD Card -// -#define SDIO_SUPPORT -#define SD_DETECT_PIN -1 // PF0, but it isn't connected -#define SDIO_CLOCK 4500000 -#define SDIO_READ_RETRIES 16 +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h index df49da1095..b76ef52c42 100644 --- a/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V6.h @@ -21,165 +21,14 @@ */ #pragma once -#include "env_validate.h" - -/** - * 2017 Victor Perez Marlin for stm32f1 test - */ - -#define BOARD_INFO_NAME "Chitu3D" -#define DEFAULT_MACHINE_NAME "STM32F103ZET6" - -#define BOARD_NO_NATIVE_USB - -#define DISABLE_JTAG - -// -// EEPROM -// - -#if NO_EEPROM_SELECTED - #define FLASH_EEPROM_EMULATION -#endif - -#if ENABLED(FLASH_EEPROM_EMULATION) - // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) - #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) - #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) - #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE -#else - #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM -#endif - -// -// Limit Switches -// -#define X_STOP_PIN PG10 -#define Y_STOP_PIN PA12 -#define Z_STOP_PIN PG9 - -// -// Steppers -// -#define X_ENABLE_PIN PC13 -#define X_STEP_PIN PE5 -#define X_DIR_PIN PE6 - -#define Y_ENABLE_PIN PE4 -#define Y_STEP_PIN PE2 -#define Y_DIR_PIN PE3 - -#define Z_ENABLE_PIN PE1 -#define Z_STEP_PIN PB9 -#define Z_DIR_PIN PE0 +#define BOARD_INFO_NAME "Chitu3D V6" #define Z2_ENABLE_PIN PF3 #define Z2_STEP_PIN PF5 #define Z2_DIR_PIN PF1 -#define E0_ENABLE_PIN PB8 -#define E0_STEP_PIN PB4 -#define E0_DIR_PIN PB5 - -#define E1_ENABLE_PIN PG8 -#define E1_STEP_PIN PC7 -#define E1_DIR_PIN PC6 - -// -// Temperature Sensors -// -#define TEMP_0_PIN PA1 // TH1 -#define TEMP_BED_PIN PA0 // TB1 - -// -// Heaters -// -#define HEATER_0_PIN PG12 // HEATER1 -#define HEATER_BED_PIN PG11 // HOT BED -//#define HEATER_BED_INVERTING true - -// -// Fans -// -#define CONTROLLER_FAN_PIN PD6 // BOARD FAN -#define FAN_PIN PG13 // FAN -#define FAN2_PIN PG14 - -// -// Misc -// -#define BEEPER_PIN PB0 -//#define LED_PIN PD3 -//#define POWER_LOSS_PIN PG2 // PG4 PW_DET - -#ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN PA15 // MT_DET -#endif #ifndef FIL_RUNOUT2_PIN #define FIL_RUNOUT2_PIN PF13 #endif -// SPI Flash -#define HAS_SPI_FLASH 1 -#if HAS_SPI_FLASH - #define SPI_FLASH_SIZE 0x200000 // 2MB -#endif - -// SPI 2 -#define W25QXX_CS_PIN PB12 -#define W25QXX_MOSI_PIN PB15 -#define W25QXX_MISO_PIN PB14 -#define W25QXX_SCK_PIN PB13 - -// -// TronXY TFT Support -// - -#if HAS_FSMC_TFT - - // Shared FSMC - - #define TOUCH_CS_PIN PB7 // SPI1_NSS - #define TOUCH_SCK_PIN PA5 // SPI1_SCK - #define TOUCH_MISO_PIN PA6 // SPI1_MISO - #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI - - #define TFT_RESET_PIN PF11 - #define TFT_BACKLIGHT_PIN PD13 - - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT - #define FSMC_CS_PIN PD7 - #define FSMC_RS_PIN PD11 - #define FSMC_DMA_DEV DMA2 - #define FSMC_DMA_CHANNEL DMA_CH5 - -#endif - -#if ENABLED(TFT_LVGL_UI) - // LVGL - #define HAS_SPI_FLASH_FONT 1 - #define HAS_GCODE_PREVIEW 1 - #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 - #define HAS_LANG_SELECT_SCREEN 1 - #define HAS_BAK_VIEW_IN_FLASH 0 - #define HAS_LOGO_IN_FLASH 0 -#elif ENABLED(TFT_COLOR_UI) - // Color UI - #define TFT_BUFFER_SIZE 14400 -#endif - -// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available -// so SPI2 is required. -#define SPI_DEVICE 2 -#define SD_SCK_PIN PB13 -#define SD_MISO_PIN PB14 -#define SD_MOSI_PIN PB15 -#define SD_SS_PIN PB12 - -// -// SD Card -// -#define SDIO_SUPPORT -#define SD_DETECT_PIN -1 // PF0, but it isn't connected -#define SDIO_CLOCK 4500000 -#define SDIO_READ_RETRIES 16 +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h new file mode 100755 index 0000000000..eb7f91deab --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_V9.h @@ -0,0 +1,36 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#define BOARD_INFO_NAME "Chitu3D V9" + +#define Z_STOP_PIN PA14 + +#define Z2_ENABLE_PIN PF3 +#define Z2_STEP_PIN PF5 +#define Z2_DIR_PIN PF1 + +#ifndef FIL_RUNOUT2_PIN + #define FIL_RUNOUT2_PIN PF13 +#endif + +#include "pins_CHITU3D_common.h" diff --git a/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h new file mode 100644 index 0000000000..b638589388 --- /dev/null +++ b/Marlin/src/pins/stm32f1/pins_CHITU3D_common.h @@ -0,0 +1,177 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#pragma once + +#include "env_validate.h" + +#ifndef BOARD_INFO_NAME + #define BOARD_INFO_NAME "Chitu3D" +#endif +#ifndef DEFAULT_MACHINE_NAME + #define DEFAULT_MACHINE_NAME "STM32F103ZET6" +#endif + +#define BOARD_NO_NATIVE_USB +#define DISABLE_JTAG + +// +// EEPROM +// + +#if NO_EEPROM_SELECTED + #define FLASH_EEPROM_EMULATION +#endif + +#if ENABLED(FLASH_EEPROM_EMULATION) + // SoC Flash (framework-arduinoststm32-maple/STM32F1/libraries/EEPROM/EEPROM.h) + #define EEPROM_START_ADDRESS (0x8000000UL + (512 * 1024) - 2 * EEPROM_PAGE_SIZE) + #define EEPROM_PAGE_SIZE (0x800U) // 2KB, but will use 2x more (4KB) + #define MARLIN_EEPROM_SIZE EEPROM_PAGE_SIZE +#else + #define MARLIN_EEPROM_SIZE 0x800U // On SD, Limit to 2KB, require this amount of RAM +#endif + +// +// Limit Switches +// +#define X_STOP_PIN PG10 +#define Y_STOP_PIN PA12 +#ifndef Z_STOP_PIN + #define Z_STOP_PIN PG9 +#endif + +// +// Steppers +// +#define X_ENABLE_PIN PC13 +#define X_STEP_PIN PE5 +#define X_DIR_PIN PE6 + +#define Y_ENABLE_PIN PE4 +#define Y_STEP_PIN PE2 +#define Y_DIR_PIN PE3 + +#define Z_ENABLE_PIN PE1 +#define Z_STEP_PIN PB9 +#define Z_DIR_PIN PE0 + +#define E0_ENABLE_PIN PB8 +#define E0_STEP_PIN PB4 +#define E0_DIR_PIN PB5 + +#define E1_ENABLE_PIN PG8 +#define E1_STEP_PIN PC7 +#define E1_DIR_PIN PC6 + +// +// Temperature Sensors +// +#define TEMP_0_PIN PA1 // TH1 Analog Input +#define TEMP_BED_PIN PA0 // TB1 Analog Input + +// +// Heaters +// +#define HEATER_0_PIN PG12 // HEATER1 +#define HEATER_BED_PIN PG11 // HOT BED +//#define HEATER_BED_INVERTING true + +// +// Fans +// +#define CONTROLLER_FAN_PIN PD6 // BOARD FAN +#define FAN_PIN PG13 // FAN +#define FAN2_PIN PG14 + +// +// Misc +// +#define BEEPER_PIN PB0 +//#define LED_PIN PD3 +//#define POWER_LOSS_PIN PG2 // PG4 PW_DET + +#ifndef FIL_RUNOUT_PIN + #define FIL_RUNOUT_PIN PA15 // MT_DET +#endif + +// SPI Flash +#define HAS_SPI_FLASH 1 +#if HAS_SPI_FLASH + #define SPI_FLASH_SIZE 0x200000 // 2MB +#endif + +// SPI 2 +#define W25QXX_CS_PIN PB12 +#define W25QXX_MOSI_PIN PB15 +#define W25QXX_MISO_PIN PB14 +#define W25QXX_SCK_PIN PB13 + +// +// TFT with FSMC interface +// +#if HAS_FSMC_TFT + #define TOUCH_CS_PIN PB7 // SPI1_NSS + #define TOUCH_SCK_PIN PA5 // SPI1_SCK + #define TOUCH_MISO_PIN PA6 // SPI1_MISO + #define TOUCH_MOSI_PIN PA7 // SPI1_MOSI + + #define TFT_RESET_PIN PF11 + #define TFT_BACKLIGHT_PIN PD13 + + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PD11 + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN +#endif + +#if ENABLED(TFT_LVGL_UI) + // LVGL + #define HAS_SPI_FLASH_FONT 1 + #define HAS_GCODE_PREVIEW 1 + #define HAS_GCODE_DEFAULT_VIEW_IN_FLASH 0 + #define HAS_LANG_SELECT_SCREEN 1 + #define HAS_BAK_VIEW_IN_FLASH 0 + #define HAS_LOGO_IN_FLASH 0 +#elif ENABLED(TFT_COLOR_UI) + // Color UI + #define TFT_BUFFER_SIZE 14400 +#endif + +// SPI1(PA7)=LCD & SPI3(PB5)=STUFF, are not available +// so SPI2 is required. +#define SPI_DEVICE 2 +#define SD_SCK_PIN PB13 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 +#define SD_SS_PIN PB12 + +// +// SD Card +// +#define SDIO_SUPPORT +#define SD_DETECT_PIN -1 // PF0, but it isn't connected +#define SDIO_CLOCK 4500000 +#define SDIO_READ_RETRIES 16 diff --git a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h index c49c31e741..bdf3f48c3a 100644 --- a/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h +++ b/Marlin/src/pins/stm32f1/pins_FLSUN_HISPEED.h @@ -271,11 +271,9 @@ #error "FLSun HiSpeed default BEEPER_PIN is not a SPEAKER." #endif -#if HAS_FSMC_TFT || HAS_GRAPHICAL_TFT - #define TFT_CS_PIN PD7 // NE4 - #define TFT_RS_PIN PD11 // A0 -#endif - +// +// TFT with FSMC interface +// #if HAS_FSMC_TFT /** * Note: MKS Robin TFT screens use various TFT controllers @@ -291,12 +289,16 @@ */ //#define TFT_RESET_PIN PC6 // FSMC_RST #define TFT_BACKLIGHT_PIN PD13 - #define FSMC_CS_PIN TFT_CS_PIN // NE4 - #define FSMC_RS_PIN TFT_RS_PIN // A0 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PD11 // A0 #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_CS_PIN TFT_CS_PIN + #define TFT_RS_PIN TFT_RS_PIN + #ifdef TFT_CLASSIC_UI #define TFT_MARLINBG_COLOR 0x3186 // Grey #define TFT_MARLINUI_COLOR 0xC7B6 // Green @@ -307,6 +309,8 @@ #elif HAS_GRAPHICAL_TFT #define TFT_RESET_PIN PC6 #define TFT_BACKLIGHT_PIN PD13 + #define TFT_CS_PIN PD7 // NE4 + #define TFT_RS_PIN PD11 // A0 #endif #if NEED_TOUCH_PINS diff --git a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h index b94ec0c7f3..be0a622b1d 100644 --- a/Marlin/src/pins/stm32f1/pins_FLY_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_FLY_MINI.h @@ -24,7 +24,7 @@ #include "env_validate.h" #define BOARD_INFO_NAME "FLY_MINI" -#define BOARD_WEBSITE_URL "github.com/FLYmaker" +#define BOARD_WEBSITE_URL "github.com/FLYmaker/FLY-MINI" #define DISABLE_JTAG // diff --git a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h index 9f08f18bf7..bded0edd3a 100644 --- a/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h +++ b/Marlin/src/pins/stm32f1/pins_JGAURORA_A5S_A1.h @@ -26,6 +26,8 @@ * ║║ ╦╠═╣│ │├┬┘│ │├┬┘├─┤╠╣ │ │├┬┘│ ││││ │ │ ││││ * ╚╝╚═╝╩ ╩└─┘┴└─└─┘┴└─┴ ┴╚ └─┘┴└─└─┘┴ ┴o└─┘└─┘┴ ┴ * Pin assignments for 32-bit JGAurora A5S & A1 + * + * https://jgaurorawiki.com/_media/jgaurora_a5s_a1_pinout.png */ #include "env_validate.h" @@ -102,15 +104,20 @@ #define FIL_RUNOUT_PIN PC7 // -// LCD +// TFT with FSMC interface // -#define LCD_BACKLIGHT_PIN PF11 -#define FSMC_CS_PIN PD7 -#define FSMC_RS_PIN PG0 +#if HAS_FSMC_TFT + #define LCD_BACKLIGHT_PIN PF11 + #define FSMC_CS_PIN PD7 + #define FSMC_RS_PIN PG0 -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_DMA_DEV DMA2 -#define FSMC_DMA_CHANNEL DMA_CH5 + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 + + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN +#endif // // SD Card @@ -129,4 +136,7 @@ #if NEED_TOUCH_PINS #define TOUCH_CS_PIN PA4 #define TOUCH_INT_PIN PC4 + #define TOUCH_MISO_PIN PA6 + #define TOUCH_MOSI_PIN PA7 + #define TOUCH_SCK_PIN PA5 #endif diff --git a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h index fa708b248e..391610522d 100644 --- a/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h +++ b/Marlin/src/pins/stm32f1/pins_LONGER3D_LK.h @@ -117,20 +117,28 @@ //#undef Z_MAX_PIN // Uncomment if using ZMAX connector (PE5) #endif -#define TFT_RESET_PIN PC4 // pin 33 -#define TFT_BACKLIGHT_PIN PD12 // pin 59 -#define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 -#define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed +// +// TFT with FSMC interface +// +#if HAS_FSMC_TFT + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 // pin 88 = FSMC_NE1 + #define FSMC_RS_PIN PD11 // pin 58 A16 Register. Only one address needed + #define FSMC_DMA_DEV DMA2 + #define FSMC_DMA_CHANNEL DMA_CH5 -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_DMA_DEV DMA2 -#define FSMC_DMA_CHANNEL DMA_CH5 + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN -#define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h -#define DOGLCD_SCK -1 + #define TFT_RESET_PIN PC4 // pin 33 + #define TFT_BACKLIGHT_PIN PD12 // pin 59 -// Buffer for Color UI -#define TFT_BUFFER_SIZE 3200 + #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h + #define DOGLCD_SCK -1 + + // Buffer for Color UI + #define TFT_BUFFER_SIZE 3200 +#endif /** * Note: Alfawise U20/U30 boards DON'T use SPI2, as the hardware designer diff --git a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h index 179c04a304..14f2ad981a 100644 --- a/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h +++ b/Marlin/src/pins/stm32f1/pins_MINGDA_MPX_ARM_MINI.h @@ -133,11 +133,9 @@ // #define BEEPER_PIN PE4 -/** - * Note: MKS Robin TFT screens use various TFT controllers. - * If the screen stays white, disable 'LCD_RESET_PIN' - * to let the bootloader init the screen. - */ +// +// TFT with FSMC interface +// #if HAS_FSMC_TFT /** * Note: MKS Robin TFT screens use various TFT controllers @@ -151,18 +149,17 @@ * Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu * because Marlin uses the reset as a failsafe to revive a glitchy LCD. */ - #define TFT_CS_PIN PD7 // NE4 - #define TFT_RS_PIN PG0 // A0 - - #define FSMC_CS_PIN TFT_CS_PIN - #define FSMC_RS_PIN TFT_RS_PIN + #define TFT_RESET_PIN PF15 + #define TFT_BACKLIGHT_PIN PF11 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PD7 // NE4 + #define FSMC_RS_PIN PG0 // A0 #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 - #define TFT_RESET_PIN PF15 - #define TFT_BACKLIGHT_PIN PF11 + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 1 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h index 8da4dcc9de..f912978051 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN.h @@ -155,7 +155,7 @@ #define WIFI_IO0_PIN PG1 // -// LCD screen +// TFT with FSMC interface // #if HAS_FSMC_TFT /** @@ -170,18 +170,17 @@ * Setting an 'TFT_RESET_PIN' may cause a flicker when entering the LCD menu * because Marlin uses the reset as a failsafe to revive a glitchy LCD. */ - #define TFT_CS_PIN PG12 // NE4 - #define TFT_RS_PIN PF0 // A0 - - #define FSMC_CS_PIN TFT_CS_PIN - #define FSMC_RS_PIN TFT_RS_PIN + #define TFT_RESET_PIN PF6 + #define TFT_BACKLIGHT_PIN PG11 #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN PG12 // NE4 + #define FSMC_RS_PIN PF0 // A0 #define FSMC_DMA_DEV DMA2 #define FSMC_DMA_CHANNEL DMA_CH5 - #define TFT_RESET_PIN PF6 - #define TFT_BACKLIGHT_PIN PG11 + #define TFT_CS_PIN FSMC_CS_PIN + #define TFT_RS_PIN FSMC_RS_PIN #define TOUCH_BUTTONS_HW_SPI #define TOUCH_BUTTONS_HW_SPI_DEVICE 2 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h index 14664bda39..c7850903e7 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3P.h @@ -36,6 +36,7 @@ #define BOARD_INFO_NAME "MKS Robin E3P" #define BOARD_NO_NATIVE_USB +#define MKS_HARDWARE_TEST_ONLY_E0 // // Release PB4 (Y_ENABLE_PIN) from JTAG NRST role diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h index b482065666..b5d02942f3 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_E3_common.h @@ -155,6 +155,18 @@ #define DOGLCD_SCK PB13 #define DOGLCD_MOSI PB15 + #elif ENABLED(MKS_MINI_12864_V3) + #define DOGLCD_CS PA4 + #define DOGLCD_A0 PA5 + #define LCD_PINS_DC DOGLCD_A0 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PA6 + #define NEOPIXEL_PIN PA7 + #define DOGLCD_MOSI PB15 + #define DOGLCD_SCK PB13 + #define FORCE_SOFT_SPI + #define SOFTWARE_SPI + #else #define LCD_PINS_D4 PA6 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h index fad36e8384..73c77d092a 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_LITE.h @@ -143,6 +143,6 @@ // #define SPI_DEVICE 2 #define SD_SCK_PIN PB13 -#define SD_MISO_PIN P1B4 -#define SD_MOSI_PIN P1B5 +#define SD_MISO_PIN PB14 +#define SD_MOSI_PIN PB15 #define SD_SS_PIN PA15 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h index 0e2aee9e99..95d62f05a4 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO.h @@ -105,7 +105,7 @@ #ifndef HEATER_0_PIN #define HEATER_0_PIN PC3 #endif -#if HOTENDS == 1 +#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #ifndef FAN1_PIN #define FAN1_PIN PB0 #endif @@ -172,13 +172,18 @@ // #define BEEPER_PIN PC5 -/** - * Note: MKS Robin TFT screens use various TFT controllers. - * If the screen stays white, disable 'TFT_RESET_PIN' - * to let the bootloader init the screen. - */ -// Shared FSMC Configs +// +// TFT with FSMC interface +// #if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'TFT_RESET_PIN' + * to let the bootloader init the screen. + */ + #define TFT_RESET_PIN PC6 // FSMC_RST + #define TFT_BACKLIGHT_PIN PD13 + #define DOGLCD_MOSI -1 // Prevent auto-define by Conditionals_post.h #define DOGLCD_SCK -1 @@ -187,9 +192,6 @@ #define TOUCH_MISO_PIN PB14 // SPI2_MISO #define TOUCH_MOSI_PIN PB15 // SPI2_MOSI - #define TFT_RESET_PIN PC6 // FSMC_RST - #define TFT_BACKLIGHT_PIN PD13 - #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT #define FSMC_CS_PIN PD7 #define FSMC_RS_PIN PD11 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h index 3a203aab49..7bbc2b26da 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_NANO_V2.h @@ -231,10 +231,19 @@ #define SDCARD_CONNECTION ONBOARD #endif -#define SDIO_SUPPORT -#define SDIO_CLOCK 4500000 // 4.5 MHz -#define SD_DETECT_PIN PD12 -#define ONBOARD_SD_CS_PIN PC11 +#if SD_CONNECTION_IS(ONBOARD) + #define SDIO_SUPPORT + #define SDIO_CLOCK 4500000 // 4.5 MHz + #define SD_DETECT_PIN PD12 + #define ONBOARD_SD_CS_PIN PC11 +#elif SD_CONNECTION_IS(LCD) + #define ENABLE_SPI1 + #define SDSS PE10 + #define SD_SCK_PIN PA5 + #define SD_MISO_PIN PA6 + #define SD_MOSI_PIN PA7 + #define SD_DETECT_PIN PE12 +#endif // // LCD / Controller @@ -291,8 +300,13 @@ #endif #if HAS_WIRED_LCD && !HAS_SPI_TFT - - // NON TFT Displays + #define BEEPER_PIN PC5 + #define BTN_ENC PE13 + #define LCD_PINS_ENABLE PD13 + #define LCD_PINS_RS PC6 + #define BTN_EN1 PE8 + #define BTN_EN2 PE11 + #define LCD_BACKLIGHT_PIN -1 #if ENABLED(MKS_MINI_12864) @@ -319,6 +333,19 @@ #define BEEPER_PIN -1 #endif + #elif ENABLED(MKS_MINI_12864_V3) + #define DOGLCD_CS PD13 + #define DOGLCD_A0 PC6 + #define LCD_PINS_DC DOGLCD_A0 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PE14 + #define NEOPIXEL_PIN PE15 + #define DOGLCD_MOSI PA7 + #define DOGLCD_SCK PA5 + #if SD_CONNECTION_IS(ONBOARD) + #define FORCE_SOFT_SPI + #endif + #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 diff --git a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h index 129b640d97..7ff22cc1ce 100644 --- a/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_MKS_ROBIN_PRO.h @@ -205,12 +205,18 @@ #error "No custom SD drive cable defined for this board." #endif -/** - * Note: MKS Robin TFT screens use various TFT controllers. - * If the screen stays white, disable 'LCD_RESET_PIN' - * to let the bootloader init the screen. - */ +// +// TFT with FSMC interface +// #if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers. + * If the screen stays white, disable 'LCD_RESET_PIN' + * to let the bootloader init the screen. + */ + #define TFT_RESET_PIN LCD_RESET_PIN + #define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN + #define FSMC_CS_PIN PD7 // NE4 #define FSMC_RS_PIN PD11 // A0 #define FSMC_DMA_DEV DMA2 @@ -221,8 +227,6 @@ #define LCD_RESET_PIN PF6 #define LCD_BACKLIGHT_PIN PD13 - #define TFT_RESET_PIN LCD_RESET_PIN - #define TFT_BACKLIGHT_PIN LCD_BACKLIGHT_PIN #define TFT_BUFFER_SIZE 14400 diff --git a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h index 5eefedb141..1de3729dcc 100644 --- a/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h +++ b/Marlin/src/pins/stm32f1/pins_TRIGORILLA_PRO.h @@ -126,20 +126,24 @@ //#define POWER_LOSS_PIN PG2 // PG4 PW_DET #define FIL_RUNOUT_PIN PA15 // MT_DET -/** - * Note: MKS Robin TFT screens use various TFT controllers - * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) - * ILI9488 is not supported. - * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp - * - * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen. - * - * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu - * because Marlin uses the reset as a failsafe to revive a glitchy LCD. - */ +// +// TFT with FSMC interface +// #if HAS_FSMC_TFT + /** + * Note: MKS Robin TFT screens use various TFT controllers + * Supported screens are based on the ILI9341, ST7789V and ILI9328 (320x240) + * ILI9488 is not supported. + * Define init sequences for other screens in u8g_dev_tft_320x240_upscale_from_128x64.cpp + * + * If the screen stays white, disable 'LCD_RESET_PIN' to let the bootloader init the screen. + * + * Setting an 'LCD_RESET_PIN' may cause a flicker when entering the LCD menu + * because Marlin uses the reset as a failsafe to revive a glitchy LCD. + */ #define TFT_RESET_PIN PF11 #define TFT_BACKLIGHT_PIN PD13 + #define FSMC_CS_PIN PD7 // NE4 #define FSMC_RS_PIN PD11 // A0 diff --git a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h index 1e1f5251c1..d2ee2e013c 100644 --- a/Marlin/src/pins/stm32f4/pins_ANET_ET4.h +++ b/Marlin/src/pins/stm32f4/pins_ANET_ET4.h @@ -136,14 +136,18 @@ // // LCD / Controller // -#define TFT_RESET_PIN PE6 -#define TFT_CS_PIN PD7 -#define TFT_RS_PIN PD13 -#define TFT_INTERFACE_FSMC_8BIT +#if HAS_SPI_TFT || HAS_FSMC_TFT + #define TFT_RESET_PIN PE6 + #define TFT_CS_PIN PD7 + #define TFT_RS_PIN PD13 -#define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT -#define FSMC_CS_PIN TFT_CS_PIN -#define FSMC_RS_PIN TFT_RS_PIN + #if HAS_FSMC_TFT + #define LCD_USE_DMA_FSMC // Use DMA transfers to send data to the TFT + #define FSMC_CS_PIN TFT_CS_PIN + #define FSMC_RS_PIN TFT_RS_PIN + #define TFT_INTERFACE_FSMC_8BIT + #endif +#endif // // Touch Screen diff --git a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h index 408048bfe2..2bfbb19427 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_BTT002_V1_0.h @@ -161,6 +161,7 @@ // #define TEMP_0_PIN PA2 // T0 <-> E0 #define TEMP_1_PIN PA0 // T1 <-> E1 +#define TEMP_BOARD_PIN PC2 // Onboard thermistor, NTC100K #define TEMP_BED_PIN PA1 // T2 <-> Bed #define TEMP_PROBE_PIN PC3 // Shares J4 connector with PD1 diff --git a/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h b/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h index 2cf1ee1447..25622bc62d 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h @@ -500,6 +500,24 @@ #endif #endif +#if HAS_SPI_TFT + #define TFT_CS_PIN EXP2_07_PIN + #define TFT_A0_PIN EXP2_04_PIN + #define TFT_SCK_PIN EXP2_09_PIN + #define TFT_MISO_PIN EXP2_10_PIN + #define TFT_MOSI_PIN EXP2_05_PIN + + #define TOUCH_INT_PIN EXP1_04_PIN + #define TOUCH_MISO_PIN EXP1_05_PIN + #define TOUCH_MOSI_PIN EXP1_08_PIN + #define TOUCH_SCK_PIN EXP1_06_PIN + #define TOUCH_CS_PIN EXP1_07_PIN + + #define BTN_EN1 EXP2_08_PIN + #define BTN_EN2 EXP2_06_PIN + #define BTN_ENC EXP1_09_PIN +#endif + // // WIFI // diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h index fe6d8740bd..fdc6c6f6e5 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_PRO_common.h @@ -231,27 +231,81 @@ // // Temperature Sensors +// Use ADC pins without pullup for sensors that don't need a pullup. // -#define TEMP_0_PIN PF4 // T1 <-> E0 -#define TEMP_1_PIN PF5 // T2 <-> E1 -#define TEMP_2_PIN PF6 // T3 <-> E2 -#define TEMP_BED_PIN PF3 // T0 <-> Bed +#if TEMP_SENSOR_0_IS_AD8495 || TEMP_SENSOR_0 == 20 + #define TEMP_0_PIN PF8 +#else + #define TEMP_0_PIN PF4 // T1 <-> E0 +#endif +#if TEMP_SENSOR_1_IS_AD8495 || TEMP_SENSOR_1 == 20 + #define TEMP_1_PIN PF9 +#else + #define TEMP_1_PIN PF5 // T2 <-> E1 +#endif +#if TEMP_SENSOR_2_IS_AD8495 || TEMP_SENSOR_2 == 20 + #define TEMP_2_PIN PF10 +#else + #define TEMP_2_PIN PF6 // T3 <-> E2 +#endif +#if TEMP_SENSOR_BED_IS_AD8495 || TEMP_SENSOR_BED == 20 + #define TEMP_BED_PIN PF7 +#else + #define TEMP_BED_PIN PF3 // T0 <-> Bed +#endif + +#ifdef TEMP_SENSOR_PROBE && !defined(TEMP_PROBE_PIN) + #if TEMP_SENSOR_PROBE_IS_AD8495 || TEMP_SENSOR_PROBE == 20 + #if HOTENDS == 2 + #define TEMP_PROBE_PIN PF10 + #elif HOTENDS < 2 + #define TEMP_PROBE_PIN PF9 + #endif + #else + #if HOTENDS == 2 + #define TEMP_PROBE_PIN TEMP_2_PIN + #elif HOTENDS < 2 + #define TEMP_PROBE_PIN TEMP_1_PIN + #endif + #endif +#endif + +#if TEMP_SENSOR_CHAMBER && !defined(TEMP_CHAMBER_PIN) + #if TEMP_SENSOR_CHAMBER_IS_AD8495 || TEMP_SENSOR_CHAMBER == 20 + #define TEMP_CHAMBER_PIN PF10 + #else + #define TEMP_CHAMBER_PIN TEMP_2_PIN + #endif +#endif // -// Heaters / Fans +// Heaters // #define HEATER_0_PIN PB1 // Heater0 #define HEATER_1_PIN PD14 // Heater1 -#define HEATER_2_PIN PB0 // Heater1 +#if TEMP_SENSOR_CHAMBER && HOTENDS < 3 + #define HEATER_CHAMBER_PIN PB0 // Heater2 +#else + #define HEATER_2_PIN PB0 // Heater2 +#endif #define HEATER_BED_PIN PD12 // Hotbed + +// +// Fans +// #define FAN_PIN PC8 // Fan0 #define FAN1_PIN PE5 // Fan1 -#define FAN2_PIN PE6 // Fan2 #ifndef E0_AUTO_FAN_PIN #define E0_AUTO_FAN_PIN FAN1_PIN #endif +#if ENABLED(USE_CONTROLLER_FAN) && HOTENDS < 2 + #define CONTROLLER_FAN_PIN PE6 // Fan2 +#else + #define FAN2_PIN PE6 // Fan2 +#endif + // // Misc. Functions // diff --git a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h index d465bb23c7..a9dfc367bf 100644 --- a/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h +++ b/Marlin/src/pins/stm32f4/pins_BTT_SKR_V2_0_common.h @@ -210,7 +210,7 @@ #define TEMP_0_PIN PA2 // TH0 #define TEMP_1_PIN PA3 // TH1 -#if HOTENDS == 1 +#if HOTENDS == 1 && DISABLED(HEATERS_PARALLEL) #if TEMP_SENSOR_PROBE #define TEMP_PROBE_PIN TEMP_1_PIN #elif TEMP_SENSOR_CHAMBER diff --git a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h index b92056ea86..3b75e7072a 100644 --- a/Marlin/src/pins/stm32f4/pins_LERDGE_K.h +++ b/Marlin/src/pins/stm32f4/pins_LERDGE_K.h @@ -230,9 +230,8 @@ #define BEEPER_PIN PC7 // -// LCD / Controller +// TFT with FSMC interface // - #if HAS_FSMC_TFT //#define TFT_DRIVER LERDGE_ST7796 diff --git a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h index 9ae2870a40..182506f11e 100644 --- a/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h +++ b/Marlin/src/pins/stm32f4/pins_MKS_ROBIN_NANO_V3.h @@ -59,7 +59,7 @@ // // Limit Switches // -#define X_DIAG_PIN PD15 +#define X_DIAG_PIN PA15 #define Y_DIAG_PIN PD2 #define Z_DIAG_PIN PC8 #define E0_DIAG_PIN PC4 @@ -178,22 +178,21 @@ // // Misc. Functions // -#define MT_DET_1 PA4 -#define MT_DET_2 PE6 -#define PW_DET PA13 -#define PW_OFF PB2 +#define MT_DET_1_PIN PA4 +#define MT_DET_2_PIN PE6 +#define MT_DET_PIN_INVERTING false // LVGL UI filament RUNOUT PIN STATE #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN MT_DET_1 + #define FIL_RUNOUT_PIN MT_DET_1_PIN #endif #ifndef FIL_RUNOUT2_PIN - #define FIL_RUNOUT2_PIN MT_DET_2 + #define FIL_RUNOUT2_PIN MT_DET_2_PIN #endif #ifndef POWER_LOSS_PIN - #define POWER_LOSS_PIN PW_DET + #define POWER_LOSS_PIN PA13 // PW_DET #endif -#define PS_ON_PIN PW_OFF +#define PS_ON_PIN PB2 // PW_OFF // // Enable MKSPWC support @@ -214,6 +213,19 @@ #define SDCARD_CONNECTION ONBOARD #endif +// MKS WIFI MODULE +#if ENABLED(MKS_WIFI_MODULE) + #define WIFI_IO0_PIN PC13 // MKS ESP WIFI IO0 PIN + #define WIFI_IO1_PIN PC7 // MKS ESP WIFI IO1 PIN + #define WIFI_RESET_PIN PE9 // MKS ESP WIFI RESET PIN +#endif + +// MKS TEST +#if ENABLED(MKS_TEST) + #define MKS_TEST_POWER_LOSS_PIN PA13 // PW_DET + #define MKS_TEST_PS_ON_PIN PB2 // PW_OFF +#endif + // // Onboard SD card // @@ -243,7 +255,7 @@ // // LCD / Controller #define SPI_FLASH -#define HAS_SPI_FLASH 1 +#define HAS_SPI_FLASH 1 #define SPI_DEVICE 2 #define SPI_FLASH_SIZE 0x1000000 #if ENABLED(SPI_FLASH) @@ -341,6 +353,19 @@ //#define MKS_LCD12864B //#undef SHOW_BOOTSCREEN + #elif ENABLED(MKS_MINI_12864_V3) + #define DOGLCD_CS PD13 + #define DOGLCD_A0 PC6 + #define LCD_PINS_DC DOGLCD_A0 + #define LCD_BACKLIGHT_PIN -1 + #define LCD_RESET_PIN PE14 + #define NEOPIXEL_PIN PE15 + #define DOGLCD_MOSI PA7 + #define DOGLCD_SCK PA5 + #if SD_CONNECTION_IS(ONBOARD) + #define FORCE_SOFT_SPI + #endif + #else // !MKS_MINI_12864 #define LCD_PINS_D4 PE14 diff --git a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h index 0e6842125e..539a3bb8f3 100644 --- a/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h +++ b/Marlin/src/pins/teensy2/pins_PRINTRBOARD_REVF.h @@ -141,7 +141,7 @@ #endif // NO_EXTRUDRBOARD // Enable control of stepper motor currents with the I2C based MCP4728 DAC used on Printrboard REVF -#define HAS_MOTOR_CURRENT_DAC +#define HAS_MOTOR_CURRENT_DAC 1 // Set default drive strength percents if not already defined - X, Y, Z, E axis #ifndef DAC_MOTOR_CURRENT_DEFAULT diff --git a/Marlin/src/sd/Sd2Card_sdio.h b/Marlin/src/sd/Sd2Card_sdio.h index 1580344805..cc29f5d46d 100644 --- a/Marlin/src/sd/Sd2Card_sdio.h +++ b/Marlin/src/sd/Sd2Card_sdio.h @@ -29,6 +29,8 @@ bool SDIO_Init(); bool SDIO_ReadBlock(uint32_t block, uint8_t *dst); bool SDIO_WriteBlock(uint32_t block, const uint8_t *src); +bool SDIO_IsReady(); +uint32_t SDIO_GetCardSize(); class DiskIODriver_SDIO : public DiskIODriver { public: @@ -36,20 +38,22 @@ class DiskIODriver_SDIO : public DiskIODriver { bool readCSD(csd_t *csd) override { return false; } - bool readStart(const uint32_t block) override { return false; } - bool readData(uint8_t *dst) override { return false; } - bool readStop() override { return false; } + bool readStart(const uint32_t block) override { curBlock = block; return true; } + bool readData(uint8_t *dst) override { return readBlock(curBlock++, dst); } + bool readStop() override { curBlock = -1; return true; } - bool writeStart(const uint32_t block, const uint32_t) override { return false; } - bool writeData(const uint8_t *src) override { return false; } - bool writeStop() override { return false; } + bool writeStart(const uint32_t block, const uint32_t) override { curBlock = block; return true; } + bool writeData(const uint8_t *src) override { return writeBlock(curBlock++, src); } + bool writeStop() override { curBlock = -1; return true; } bool readBlock(uint32_t block, uint8_t *dst) override { return SDIO_ReadBlock(block, dst); } bool writeBlock(uint32_t block, const uint8_t *src) override { return SDIO_WriteBlock(block, src); } - uint32_t cardSize() override { return 0; } + uint32_t cardSize() override { return SDIO_GetCardSize(); } - bool isReady() override { return true; } + bool isReady() override { return SDIO_IsReady(); } void idle() override {} + private: + uint32_t curBlock; }; diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp index 2e4f3e7643..7b3b63c65c 100644 --- a/Marlin/src/sd/cardreader.cpp +++ b/Marlin/src/sd/cardreader.cpp @@ -306,11 +306,13 @@ void CardReader::printListing( pathLong[lenPrependLong - 1] = '/'; } strcpy(pathLong + lenPrependLong, longFilename); - printListing(child, /*includeLongNames=*/true, path, pathLong); + printListing(child, true, path, pathLong); } else + printListing(child, false, path); + #else + printListing(child, path); #endif - printListing(child, path); else { SERIAL_ECHO_MSG(STR_SD_CANT_OPEN_SUBDIR, dosFilename); return; @@ -1156,7 +1158,7 @@ void CardReader::cdroot() { #if DISABLED(SDSORT_USES_RAM) selectFileByIndex(o1); // Pre-fetch the first entry and save it strcpy(name1, longest_filename()); // so the loop only needs one fetch - #if ENABLED(HAS_FOLDER_SORTING) + #if HAS_FOLDER_SORTING bool dir1 = flag.filenameIsDir; #endif #endif diff --git a/buildroot/share/PlatformIO/boards/marlin_STEVAL_STM32F401VE.json b/buildroot/share/PlatformIO/boards/marlin_STEVAL_STM32F401VE.json index e89ca0af73..e260950f25 100644 --- a/buildroot/share/PlatformIO/boards/marlin_STEVAL_STM32F401VE.json +++ b/buildroot/share/PlatformIO/boards/marlin_STEVAL_STM32F401VE.json @@ -2,7 +2,7 @@ "build": { "core": "stm32", "cpu": "cortex-m4", - "extra_flags": "-DSTM32F401xx", + "extra_flags": "-DSTM32F401xx -DARDUINO_STEVAL", "f_cpu": "84000000L", "hwids": [ [ diff --git a/buildroot/share/PlatformIO/boards/marlin_blackSTM32F407VET6.json b/buildroot/share/PlatformIO/boards/marlin_blackSTM32F407VET6.json index a3f130c6b1..b0fd9db939 100644 --- a/buildroot/share/PlatformIO/boards/marlin_blackSTM32F407VET6.json +++ b/buildroot/share/PlatformIO/boards/marlin_blackSTM32F407VET6.json @@ -2,7 +2,7 @@ "build": { "core": "stm32", "cpu": "cortex-m4", - "extra_flags": "-DSTM32F407xx", + "extra_flags": "-DSTM32F407xx -DARDUINO_BLACK_F407VE", "f_cpu": "168000000L", "hwids": [ [ diff --git a/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py b/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py index 5a09dd3d14..668475dc01 100644 --- a/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py +++ b/buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py @@ -10,7 +10,7 @@ Import("env") env.AddPostAction( join("$BUILD_DIR", "${PROGNAME}.elf"), env.VerboseAction(" ".join([ - "$OBJCOPY", "-O ihex", "$TARGET", # TARGET=.pio/build/fysetc_STM32F1/firmware.elf + "$OBJCOPY", "-O ihex", "$TARGET", "\"" + join("$BUILD_DIR", "${PROGNAME}.hex") + "\"", # Note: $BUILD_DIR is a full path ]), "Building $TARGET")) diff --git a/buildroot/share/PlatformIO/scripts/mks_encrypt.py b/buildroot/share/PlatformIO/scripts/mks_encrypt.py deleted file mode 100644 index bd3548ab36..0000000000 --- a/buildroot/share/PlatformIO/scripts/mks_encrypt.py +++ /dev/null @@ -1,29 +0,0 @@ -# -# buildroot/share/PlatformIO/scripts/mks_encrypt.py -# -# Apply encryption and save as 'build.firmware' for these environments: -# - env:mks_robin -# - env:mks_robin_e3 -# - env:flsun_hispeedv1 -# - env:mks_robin_nano35 -# -Import("env") - -from SCons.Script import DefaultEnvironment -board = DefaultEnvironment().BoardConfig() - -if 'encrypt' in board.get("build").keys(): - - import marlin - - # Encrypt ${PROGNAME}.bin and save it with the name given in build.encrypt - def encrypt(source, target, env): - marlin.encrypt_mks(source, target, env, board.get("build.encrypt")) - - marlin.add_post_action(encrypt); - -else: - - import sys - print("You need to define output file via board_build.encrypt = 'filename' parameter", file=sys.stderr) - env.Exit(1); diff --git a/buildroot/share/PlatformIO/scripts/stm32_bootloader.py b/buildroot/share/PlatformIO/scripts/offset_and_rename.py similarity index 83% rename from buildroot/share/PlatformIO/scripts/stm32_bootloader.py rename to buildroot/share/PlatformIO/scripts/offset_and_rename.py index f3b1b273a2..b42b2f3531 100644 --- a/buildroot/share/PlatformIO/scripts/stm32_bootloader.py +++ b/buildroot/share/PlatformIO/scripts/offset_and_rename.py @@ -1,5 +1,5 @@ # -# stm32_bootloader.py +# offset_and_rename.py # # - If 'build.offset' is provided, either by JSON or by the environment... # - Set linker flag LD_FLASH_OFFSET and relocate the VTAB based on 'build.offset'. @@ -36,6 +36,17 @@ if 'offset' in board_keys: if "-Wl,--defsym=LD_MAX_DATA_SIZE" in flag: env["LINKFLAGS"][i] = "-Wl,--defsym=LD_MAX_DATA_SIZE=" + str(maximum_ram_size - 40) +# +# For build.encrypt rename and encode the firmware file. +# +if 'encrypt' in board_keys: + + # Encrypt ${PROGNAME}.bin and save it with the name given in build.encrypt + def encrypt(source, target, env): + marlin.encrypt_mks(source, target, env, board.get("build.encrypt")) + + marlin.add_post_action(encrypt); + # # For build.rename simply rename the firmware file. # diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c index 2ad0bb864c..a4f8f696ee 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/PeripheralPins.c @@ -232,6 +232,7 @@ const PinMap PinMap_PWM[] = { const PinMap PinMap_UART_TX[] = { // {PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, @@ -248,6 +249,7 @@ const PinMap PinMap_UART_TX[] = { const PinMap PinMap_UART_RX[] = { // {PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)}, // {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, + {PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)}, {PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, {PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)}, // {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)}, diff --git a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/variant.h index 4305c81a45..f512a311e3 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_BIGTREE_OCTOPUS_V1/variant.h @@ -150,7 +150,7 @@ extern "C" { // PWM resolution //#define PWM_RESOLUTION 12 -#define PWM_FREQUENCY 20000 // >= 20 Khz => inaudible noise for fans +#define PWM_FREQUENCY 1000 // >= 20 Khz => inaudible noise for fans #define PWM_MAX_DUTY_CYCLE 255 // SPI Definitions diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103Rx/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F103Rx/variant.h index 7dcbb793d0..41b194abe0 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F103Rx/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Rx/variant.h @@ -101,11 +101,24 @@ extern "C" { #endif // Override default Arduino configuration + // SPI Definitions -#define PIN_SPI_SS PA4 -#define PIN_SPI_MOSI PA7 -#define PIN_SPI_MISO PA6 -#define PIN_SPI_SCK PA5 +#if DEFAULT_SPI == 3 + #define PIN_SPI_SS PA15 + #define PIN_SPI_MOSI PB3 + #define PIN_SPI_MISO PB4 + #define PIN_SPI_SCK PB5 +#elif DEFAULT_SPI == 2 + #define PIN_SPI_SS PB12 + #define PIN_SPI_MOSI PB13 + #define PIN_SPI_MISO PB14 + #define PIN_SPI_SCK PB15 +#else + #define PIN_SPI_SS PA4 + #define PIN_SPI_MOSI PA7 + #define PIN_SPI_MISO PA6 + #define PIN_SPI_SCK PA5 +#endif // I2C Definitions #define PIN_WIRE_SDA PB7 @@ -118,6 +131,7 @@ extern "C" { #ifndef TIMER_SERVO #define TIMER_SERVO TIM2 #endif + // UART Definitions // Define here Serial instance number to map on Serial generic name #define SERIAL_UART_INSTANCE 1 @@ -126,7 +140,7 @@ extern "C" { #define PIN_SERIAL_RX PA10 #define PIN_SERIAL_TX PA9 -/* Extra HAL modules */ +// Extra HAL modules #if defined(STM32F103xE) || defined(STM32F103xG) #define HAL_DAC_MODULE_ENABLED #endif diff --git a/buildroot/share/PlatformIO/variants/MARLIN_F103Vx/variant.h b/buildroot/share/PlatformIO/variants/MARLIN_F103Vx/variant.h index b622b39376..496d8817a1 100644 --- a/buildroot/share/PlatformIO/variants/MARLIN_F103Vx/variant.h +++ b/buildroot/share/PlatformIO/variants/MARLIN_F103Vx/variant.h @@ -132,8 +132,12 @@ extern "C" { // Timer Definitions (optional) // Use TIM6/TIM7 when possible as servo and tone don't need GPIO output pin -#define TIMER_TONE TIM3 -#define TIMER_SERVO TIM2 +#ifndef TIMER_TONE + #define TIMER_TONE TIM6 +#endif +#ifndef TIMER_SERVO + #define TIMER_SERVO TIM7 +#endif // UART Definitions // Define here Serial instance number to map on Serial generic name diff --git a/buildroot/share/fonts/genallfont.sh b/buildroot/share/fonts/genallfont.sh index 0a66990212..d5cad54361 100755 --- a/buildroot/share/fonts/genallfont.sh +++ b/buildroot/share/fonts/genallfont.sh @@ -119,7 +119,7 @@ if [ 1 = 1 ]; then * along with this program. If not, see . * */ -#include +#include #if defined(__AVR__) && ENABLED(NOT_EXTENDED_ISO10646_1_5X7) // reduced font (only symbols 1 - 127) - saves about 1278 bytes of FLASH diff --git a/buildroot/share/fonts/uxggenpages.sh b/buildroot/share/fonts/uxggenpages.sh index a99fd99024..047d3ae661 100755 --- a/buildroot/share/fonts/uxggenpages.sh +++ b/buildroot/share/fonts/uxggenpages.sh @@ -169,7 +169,7 @@ cat <fontutf8-data.h * Contents will be REPLACED by future processing! * Use genallfont.sh to generate font data for updated languages. */ -#include +#include $TMPA #define FONTDATA_ITEM(page, begin, end, data) { page, begin, end, COUNT(data), data } static const uxg_fontinfo_t g_fontinfo[] PROGMEM = {$TMPB}; diff --git a/buildroot/tests/STM32F103VE_longer_maple b/buildroot/tests/STM32F103VE_longer_maple new file mode 100755 index 0000000000..4570a3214d --- /dev/null +++ b/buildroot/tests/STM32F103VE_longer_maple @@ -0,0 +1,23 @@ +#!/usr/bin/env bash +# +# Build tests for STM32F103VET6 (using maple STM32F1 framework) +# + +# exit on first failure +set -e + +use_example_configs Alfawise/U20 +opt_enable BAUD_RATE_GCODE +exec_test $1 $2 "maple CLASSIC_UI U20 config" "$3" + +use_example_configs Alfawise/U20 +opt_enable BAUD_RATE_GCODE TFT_COLOR_UI +opt_disable TFT_CLASSIC_UI CUSTOM_STATUS_SCREEN_IMAGE +exec_test $1 $2 "maple COLOR_UI U20 config" "$3" + +use_example_configs Alfawise/U20-bltouch +opt_enable BAUD_RATE_GCODE +exec_test $1 $2 "maple BLTouch U20 config" + +# cleanup +restore_configs diff --git a/buildroot/tests/mega2560 b/buildroot/tests/mega2560 index 0932388969..edae6d24ae 100755 --- a/buildroot/tests/mega2560 +++ b/buildroot/tests/mega2560 @@ -198,6 +198,17 @@ opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER SDSUPPORT EEPROM_SETTINGS EEPROM_BOO exec_test $1 $2 "REPRAP MEGA2560 RAMPS | Laser Feature | Air Evacuation | Air Assist | Cooler | Flowmeter | 44780 LCD " "$3" +# +# Test redundant temperature sensors + MAX TC +# +restore_configs +opt_set MOTHERBOARD BOARD_RAMPS_14_EFB EXTRUDERS 1 \ + TEMP_SENSOR_0 -2 TEMP_SENSOR_REDUNDANT -2 \ + TEMP_SENSOR_REDUNDANT_SOURCE E1 TEMP_SENSOR_REDUNDANT_TARGET E0 \ + TEMP_0_CS_PIN 11 TEMP_1_CS_PIN 12 + +exec_test $1 $2 "MEGA2560 RAMPS | Redundant temperature sensor | 2x MAX6675" "$3" + # # Language files test with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER # diff --git a/buildroot/tests/mks_robin_nano35 b/buildroot/tests/mks_robin_nano35 index 0891744692..bd16fe48e9 100755 --- a/buildroot/tests/mks_robin_nano35 +++ b/buildroot/tests/mks_robin_nano35 @@ -21,8 +21,9 @@ exec_test $1 $2 "MKS Robin nano v1.2 Emulated DOGM FSMC" "$3" use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_disable TFT_INTERFACE_FSMC -opt_enable TFT_INTERFACE_SPI -exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI" "$3" +opt_enable TFT_INTERFACE_SPI MKS_WIFI_MODULE +opt_add MKS_TEST +exec_test $1 $2 "MKS Robin v2 nano Emulated DOGM SPI, MKS_WIFI_MODULE" "$3" # # MKS Robin nano v1.2 LVGL FSMC diff --git a/buildroot/tests/mks_robin_nano35_maple b/buildroot/tests/mks_robin_nano35_maple index f1549a8103..ebd5466ce6 100755 --- a/buildroot/tests/mks_robin_nano35_maple +++ b/buildroot/tests/mks_robin_nano35_maple @@ -32,6 +32,7 @@ use_example_configs Mks/Robin opt_set MOTHERBOARD BOARD_MKS_ROBIN_NANO_V2 opt_disable TFT_INTERFACE_FSMC TFT_COLOR_UI TOUCH_SCREEN TFT_RES_320x240 SERIAL_PORT_2 opt_enable TFT_INTERFACE_SPI TFT_LVGL_UI TFT_RES_480x320 MKS_WIFI_MODULE +opt_add MKS_TEST exec_test $1 $2 "MKS Robin v2 nano LVGL SPI w/ WiFi" "$3" # diff --git a/ini/avr.ini b/ini/avr.ini index cd10f13499..88f54a723c 100644 --- a/ini/avr.ini +++ b/ini/avr.ini @@ -53,8 +53,7 @@ board = megaatmega1280 [mega_extended_optimized] extends = common_avr8 board_build.variant = MARLIN_MEGA_EXTENDED -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +extra_scripts = ${env:mega2560ext.extra_scripts} upload_speed = 57600 build_flags = ${common.build_flags} -fno-tree-scev-cprop -fno-split-wide-types -Wl,--relax -mcall-prologues diff --git a/ini/features.ini b/ini/features.ini index 6dce2be4a4..275f40e6b7 100644 --- a/ini/features.ini +++ b/ini/features.ini @@ -36,7 +36,7 @@ USES_LIQUIDCRYSTAL_I2C = marcoschwartz/LiquidCrystal_I2C@1.1.4 USES_LIQUIDTWI2 = LiquidTWI2@1.2.7 HAS_WIRED_LCD = src_filter=+ HAS_MARLINUI_HD44780 = src_filter=+ -HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.4.5 +HAS_MARLINUI_U8GLIB = U8glib-HAL@~0.5.0 src_filter=+ HAS_(FSMC|SPI|LTDC)_TFT = src_filter=+ + + HAS_FSMC_TFT = src_filter=+ + @@ -130,7 +130,7 @@ HAS_PRUSA_MMU1 = src_filter=+ HAS_PRUSA_MMU2 = src_filter=+ + PASSWORD_FEATURE = src_filter=+ + ADVANCED_PAUSE_FEATURE = src_filter=+ + + -AUTO_POWER_CONTROL = src_filter=+ +PSU_CONTROL = src_filter=+ HAS_POWER_MONITOR = src_filter=+ + POWER_LOSS_RECOVERY = src_filter=+ + PROBE_TEMP_COMPENSATION = src_filter=+ + @@ -204,7 +204,8 @@ SDSUPPORT = src_filter=+ + GCODE_REPEAT_MARKERS = src_filter=+ + HAS_EXTRUDERS = src_filter=+ + + -HAS_COOLER = src_filter=+ + +HAS_COOLER = src_filter=+ +HAS_COOLER|LASER_COOLANT_FLOW_METER = src_filter=+ AUTO_REPORT_TEMPERATURES = src_filter=+ INCH_MODE_SUPPORT = src_filter=+ TEMPERATURE_UNITS_SUPPORT = src_filter=+ diff --git a/ini/lpc176x.ini b/ini/lpc176x.ini index 450585b01a..3c5f43764b 100644 --- a/ini/lpc176x.ini +++ b/ini/lpc176x.ini @@ -14,7 +14,7 @@ # [common_LPC] platform = https://github.com/p3p/pio-nxplpc-arduino-lpc176x/archive/0.1.3.zip -platform_packages = framework-arduino-lpc176x@^0.2.6 +platform_packages = framework-arduino-lpc176x@^0.2.8 board = nxp_lpc1768 lib_ldf_mode = off lib_compat_mode = strict diff --git a/ini/stm32-common.ini b/ini/stm32-common.ini new file mode 100644 index 0000000000..4ae068939e --- /dev/null +++ b/ini/stm32-common.ini @@ -0,0 +1,41 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +#################################### +# +# HAL/STM32 Common Environments +# +#################################### + +[common_stm32] +platform = ststm32@~12.1 +board_build.core = stm32 +build_flags = ${common.build_flags} + -std=gnu++14 + -DUSBCON -DUSBD_USE_CDC + -DTIM_IRQ_PRIO=13 + -DADC_RESOLUTION=12 +build_unflags = -std=gnu++11 +src_filter = ${common.default_src_filter} + + +extra_scripts = ${common.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/stm32_serialbuffer.py + +# +# STM32 board based on a variant. +# +[stm32_variant] +extends = common_stm32 +extra_scripts = ${common_stm32.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py + buildroot/share/PlatformIO/scripts/offset_and_rename.py + +# +# USB Flash Drive mix-ins for STM32 +# +[stm_flash_drive] +platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip +build_flags = ${common_stm32.build_flags} + -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED + -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4 diff --git a/ini/stm32f0.ini b/ini/stm32f0.ini index 64568e4b4c..6aebd88298 100644 --- a/ini/stm32f0.ini +++ b/ini/stm32f0.ini @@ -27,8 +27,8 @@ platform = ${common_stm32.platform} extends = common_stm32 board = marlin_malyanM200v2 build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED - -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing - -DCUSTOM_STARTUP_FILE + -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants + -fno-strict-aliasing -DCUSTOM_STARTUP_FILE # # Malyan M200 v2 (STM32F070CB) @@ -38,7 +38,8 @@ platform = ${common_stm32.platform} extends = common_stm32 board = malyanm200_f070cb build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE + -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB + -DHAL_UART_MODULE_ENABLED -DCUSTOM_STARTUP_FILE # # Malyan M300 (STM32F070CB) @@ -48,5 +49,6 @@ platform = ${common_stm32.platform} extends = common_stm32 board = malyanm300_f070cb build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED + -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB + -DHAL_UART_MODULE_ENABLED src_filter = ${common.default_src_filter} + diff --git a/ini/stm32f1-maple.ini b/ini/stm32f1-maple.ini index 2580c4700c..2a9ba83494 100644 --- a/ini/stm32f1-maple.ini +++ b/ini/stm32f1-maple.ini @@ -26,8 +26,7 @@ platform = ststm32@~12.1 board_build.core = maple build_flags = !python Marlin/src/HAL/STM32F1/build_flags.py - ${common.build_flags} - -DARDUINO_ARCH_STM32 + ${common.build_flags} -DARDUINO_ARCH_STM32 -DMAPLE_STM32F1 build_unflags = -std=gnu11 -std=gnu++11 src_filter = ${common.default_src_filter} + lib_ignore = SPI, FreeRTOS701, FreeRTOS821 @@ -75,7 +74,7 @@ upload_protocol = dfu # # FYSETC STM32F103RC # -[env:STM32F103RC_fysetc] +[env:STM32F103RC_fysetc_maple] platform = ${common_stm32f1.platform} extends = common_STM32F103RC_maple extra_scripts = ${common_stm32f1.extra_scripts} @@ -174,7 +173,7 @@ upload_protocol = serial # # Longer 3D board in Alfawise U20 (STM32F103VET6) # -[env:STM32F103VE_longer] +[env:STM32F103VE_longer_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103VE @@ -191,7 +190,7 @@ build_unflags = ${common_stm32f1.build_unflags} # # MKS Robin Mini (STM32F103VET6) # -[env:mks_robin_mini] +[env:mks_robin_mini_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103VE @@ -229,7 +228,7 @@ build_flags = ${common_stm32f1.build_flags} # # MKS Robin Pro (STM32F103ZET6) # -[env:mks_robin_pro] +[env:mks_robin_pro_maple] platform = ${common_stm32f1.platform} extends = env:mks_robin_maple extra_scripts = ${common_stm32f1.extra_scripts} @@ -238,7 +237,7 @@ extra_scripts = ${common_stm32f1.extra_scripts} # # TRIGORILLA PRO (STM32F103ZET6) # -[env:trigorilla_pro] +[env:trigorilla_pro_maple] platform = ${common_stm32f1.platform} extends = env:mks_robin_maple extra_scripts = ${common_stm32f1.extra_scripts} @@ -260,7 +259,7 @@ build_flags = ${common_stm32f1.build_flags} # MKS Robin E3p (STM32F103VET6) # - LVGL UI # -[env:mks_robin_e3p] +[env:mks_robin_e3p_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103VE @@ -274,7 +273,7 @@ upload_protocol = jlink # # MKS Robin Lite/Lite2 (STM32F103RCT6) # -[env:mks_robin_lite] +[env:mks_robin_lite_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103RC @@ -284,7 +283,7 @@ extra_scripts = ${common_stm32f1.extra_scripts} # # MKS ROBIN LITE3 (STM32F103RCT6) # -[env:mks_robin_lite3] +[env:mks_robin_lite3_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103RC @@ -294,7 +293,7 @@ extra_scripts = ${common_stm32f1.extra_scripts} # # JGAurora A5S A1 (STM32F103ZET6) # -[env:jgaurora_a5s_a1] +[env:jgaurora_a5s_a1_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = genericSTM32F103ZE @@ -322,7 +321,7 @@ lib_ignore = ${common_stm32f1.lib_ignore} # # Chitu boards like Tronxy X5s (STM32F103ZET6) # -[env:chitu_f103] +[env:chitu_f103_maple] platform = ${common_stm32f1.platform} extends = common_stm32f1 board = marlin_CHITU_F103 @@ -339,7 +338,21 @@ build_unflags = ${common_stm32f1.build_unflags} # Some Chitu V5 boards have a problem with GPIO init. # Use this target if G28 or G29 are always failing. # -[env:chitu_v5_gpio_init] +[env:chitu_v5_gpio_init_maple] platform = ${common_stm32f1.platform} -extends = env:chitu_f103 -build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX +extends = env:chitu_f103_maple +build_flags = ${env:chitu_f103_maple.build_flags} -DCHITU_V5_Z_MIN_BUGFIX + +# +# FLYmaker FLY Mini (STM32F103RCT6) +# +[env:FLY_MINI_maple] +platform = ${common_stm32f1.platform} +extends = common_stm32f1 +board = genericSTM32F103RC +board_build.address = 0x08005000 +board_build.ldscript = fly_mini.ld +extra_scripts = ${common_stm32f1.extra_scripts} + buildroot/share/PlatformIO/scripts/custom_board.py +build_flags = ${common_stm32f1.build_flags} + -DDEBUG_LEVEL=0 -DSS_TIMER=4 diff --git a/ini/stm32f1.ini b/ini/stm32f1.ini index 6c39d0b6fa..175d0e45b0 100644 --- a/ini/stm32f1.ini +++ b/ini/stm32f1.ini @@ -10,67 +10,48 @@ # Naming Example: STM32F103RCT6 # # F : Foundation (sometimes High Performance F2/F4) -# 1 : Cortex M1 core +# 1 : Cortex M3 core # 03 : Line/Features -# R : 64 or 66 pins (V:100, Z:144, I:176) -# C : 256KB Flash-memory (D:384KB, E:512KB, G:1024KB) +# R : 64 or 66 pins (T:36, C:48, V:100, Z:144, I:176) +# C : 256KB Flash-memory (B: 128KB, D:384KB, E:512KB, G:1024KB) # T : LQFP package # 6 : -40...85°C (7: ...105°C) # ################################# -# -# HAL/STM32 Base Environment values -# -[common_stm32] -platform = ststm32@~12.1 -build_flags = ${common.build_flags} - -std=gnu++14 - -DUSBCON -DUSBD_USE_CDC - -DTIM_IRQ_PRIO=13 - -DADC_RESOLUTION=12 -build_unflags = -std=gnu++11 -src_filter = ${common.default_src_filter} + + -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/stm32_serialbuffer.py - -[common_STM32F103RC] -platform = ${common_stm32.platform} -extends = common_stm32 +[common_STM32F103RC_variant] +extends = stm32_variant board = genericSTM32F103RC -monitor_speed = 115200 -board_build.core = stm32 board_build.variant = MARLIN_F103Rx -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +build_flags = ${stm32_variant.build_flags} -DDEBUG_LEVEL=0 +monitor_speed = 115200 # # STM32F103RE # [env:STM32F103RE] -platform = ${common_stm32.platform} -extends = common_stm32 -board = genericSTM32F103RE -monitor_speed = 115200 +platform = ${common_stm32.platform} +extends = common_stm32 +board = genericSTM32F103RE +monitor_speed = 115200 # # STM32F103VE # [env:STM32F103VE] -platform = ${common_stm32.platform} -extends = common_stm32 -board = genericSTM32F103VE -monitor_speed = 115200 +platform = ${common_stm32.platform} +extends = common_stm32 +board = genericSTM32F103VE +monitor_speed = 115200 # # STM32F103ZE # [env:STM32F103ZE] -platform = ${common_stm32.platform} -extends = common_stm32 -board = genericSTM32F103ZE -monitor_speed = 115200 +platform = ${common_stm32.platform} +extends = common_stm32 +board = genericSTM32F103ZE +monitor_speed = 115200 # # BigTree SKR Mini V1.1 / SKR Mini E3 & MZ (STM32F103RCT6 ARM Cortex-M3) @@ -79,23 +60,23 @@ monitor_speed = 115200 # STM32F103RC_btt_USB ......... RCT6 with 256K (USB mass storage) # [env:STM32F103RC_btt] -platform = ${common_stm32.platform} -extends = common_STM32F103RC -build_flags = ${common_stm32.build_flags} -DDEBUG_LEVEL=0 -DTIMER_SERVO=TIM5 -board_build.offset = 0x7000 +platform = ${common_stm32.platform} +extends = common_STM32F103RC_variant +build_flags = ${common_STM32F103RC_variant.build_flags} + -DTIMER_SERVO=TIM5 +board_build.offset = 0x7000 board_upload.offset_address = 0x08007000 [env:STM32F103RC_btt_USB] -extends = env:STM32F103RC_btt platform = ${common_stm32.platform} -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip +extends = env:STM32F103RC_btt +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${env:STM32F103RC_btt.build_flags} + -DUSE_USB_FS + -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSBD_USE_CDC_MSC build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC -build_flags = ${env:STM32F103RC_btt.build_flags} ${env:stm32_flash_drive.build_flags} - -DUSBCON - -DUSE_USB_FS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSBD_USE_CDC_MSC # # MKS Robin (STM32F103ZET6) @@ -103,59 +84,53 @@ build_flags = ${env:STM32F103RC_btt.build_flags} ${env:stm32_flash_drive.b # [env:mks_robin] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = genericSTM32F103ZE -board_build.core = stm32 board_build.variant = MARLIN_F103Zx -board_build.offset = 0x7000 board_build.encrypt = Robin.bin -build_flags = ${common_stm32.build_flags} - -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 -build_unflags = ${common_stm32.build_unflags} - -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py -lib_deps = +board_build.offset = 0x7000 +build_flags = ${stm32_variant.build_flags} + -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC # # MKS Robin E3/E3D (STM32F103RCT6) with TMC2209 # [env:mks_robin_e3] platform = ${common_stm32.platform} -extends = common_STM32F103RC -build_flags = ${common_stm32.build_flags} - -DDEBUG_LEVEL=0 -DTIMER_SERVO=TIM5 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -monitor_speed = 115200 -board_build.offset = 0x5000 +extends = common_STM32F103RC_variant board_build.encrypt = Robin_e3.bin +board_build.offset = 0x5000 board_upload.offset_address = 0x08005000 +build_flags = ${common_STM32F103RC_variant.build_flags} + -DTIMER_SERVO=TIM5 -DDEFAULT_SPI=3 +build_unflags = ${common_STM32F103RC_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC +monitor_speed = 115200 debug_tool = stlink -extra_scripts = ${common_STM32F103RC.extra_scripts} - buildroot/share/PlatformIO/scripts/mks_encrypt.py # # Creality (STM32F103RET6) # [env:STM32F103RET6_creality] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED -DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -board = genericSTM32F103RE -monitor_speed = 115200 -board_build.core = stm32 -board_build.variant = MARLIN_F103Rx -board_build.offset = 0x7000 +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103RE +board_build.variant = MARLIN_F103Rx +board_build.offset = 0x7000 board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - pre:buildroot/share/PlatformIO/scripts/random-bin.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py -debug_tool = jlink -upload_protocol = jlink +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED + -DSS_TIMER=4 -DTIMER_SERVO=TIM5 + -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC +extra_scripts = ${stm32_variant.extra_scripts} + pre:buildroot/share/PlatformIO/scripts/random-bin.py +monitor_speed = 115200 +debug_tool = jlink +upload_protocol = jlink # # BigTree SKR Mini E3 V2.0 & DIP / SKR CR6 (STM32F103RET6 ARM Cortex-M3) @@ -164,90 +139,79 @@ upload_protocol = jlink # STM32F103RE_btt_USB ......... RET6 (USB mass storage) # [env:STM32F103RE_btt] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED -DSS_TIMER=4 -DTIMER_SERVO=TIM5 -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -board = genericSTM32F103RE -monitor_speed = 115200 -board_build.core = stm32 -board_build.variant = MARLIN_F103Rx -board_build.offset = 0x7000 +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103RE +board_build.variant = MARLIN_F103Rx +board_build.offset = 0x7000 board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py -debug_tool = jlink -upload_protocol = jlink +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED + -DSS_TIMER=4 -DTIMER_SERVO=TIM5 + -DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 +monitor_speed = 115200 +debug_tool = jlink +upload_protocol = jlink [env:STM32F103RE_btt_USB] -extends = env:STM32F103RE_btt platform = ${common_stm32.platform} -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip -build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC -build_flags = ${env:STM32F103RE_btt.build_flags} ${env:stm32_flash_drive.build_flags} - -DUSBCON - -DUSE_USB_FS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSBD_USE_CDC_MSC +extends = env:STM32F103RE_btt +platform_packages = ${stm_flash_drive.platform_packages} +build_flags = ${env:STM32F103RE_btt.build_flags} + -DUSE_USB_FS -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 -DUSBD_USE_CDC_MSC +build_unflags = ${stm32_variant.build_unflags} -DUSBD_USE_CDC # # FLSUN QQS Pro (STM32F103VET6) # board Hispeedv1 # [env:flsun_hispeedv1] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -board = genericSTM32F103VE -board_build.core = stm32 -board_build.variant = MARLIN_F103Vx -board_build.offset = 0x7000 -board_build.encrypt = Robin_mini.bin +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.encrypt = Robin_mini.bin +board_build.offset = 0x7000 board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 + -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC # # MKS Robin Nano V1.2 and V2 # [env:mks_robin_nano35] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 -board = genericSTM32F103VE -board_build.core = stm32 -board_build.variant = MARLIN_F103Vx -board_build.offset = 0x7000 -board_build.encrypt = Robin_nano35.bin +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.encrypt = Robin_nano35.bin +board_build.offset = 0x7000 board_upload.offset_address = 0x08007000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/mks_encrypt.py +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103VE -DSS_TIMER=4 -DENABLE_HWSERIAL3 + -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC +debug_tool = jlink +upload_protocol = jlink # # Mingda MPX_ARM_MINI # [env:mingda_mpx_arm_mini] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = genericSTM32F103ZE -board_build.core = stm32 board_build.variant = MARLIN_F103Zx board_build.offset = 0x10000 -build_flags = ${common_stm32.build_flags} -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -extra_scripts = ${common_stm32.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +build_flags = ${stm32_variant.build_flags} + -DENABLE_HWSERIAL3 -DTIMER_SERIAL=TIM5 +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC # # Malyan M200 (STM32F103CB) @@ -257,5 +221,158 @@ platform = ${common_stm32.platform} extends = common_stm32 board = malyanm200_f103cb build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB -DHAL_UART_MODULE_ENABLED + -DHAL_PCD_MODULE_ENABLED -DDISABLE_GENERIC_SERIALUSB + -DHAL_UART_MODULE_ENABLED src_filter = ${common.default_src_filter} + + +# +# FLYmaker FLY Mini (STM32F103RCT6) +# +[env:FLY_MINI] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103RC +board_build.variant = MARLIN_F103Rx +board_build.offset = 0x5000 +board_upload.offset_address = 0x08005000 +build_flags = ${stm32_variant.build_flags} -DSS_TIMER=4 + +# +# MKS Robin Mini (STM32F103VET6) +# +[env:mks_robin_mini] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.encrypt = Robin_mini.bin +board_build.offset = 0x7000 +board_upload.offset_address = 0x08007000 +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103VE -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2 + +# +# MKS Robin Lite/Lite2 (STM32F103RCT6) +# +[env:mks_robin_lite] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103RC +board_build.variant = MARLIN_F103Rx +board_build.encrypt = mksLite.bin +board_build.offset = 0x5000 +board_upload.offset_address = 0x08005000 + +# +# MKS ROBIN LITE3 (STM32F103RCT6) +# +[env:mks_robin_lite3] +platform = ${common_stm32.platform} +extends = env:mks_robin_lite +board_build.encrypt = mksLite3.bin + +# +# MKS Robin Pro (STM32F103ZET6) +# +[env:mks_robin_pro] +platform = ${common_stm32.platform} +extends = env:mks_robin +board_build.encrypt = Robin_pro.bin + +# +# MKS Robin E3p (STM32F103VET6) +# - LVGL UI +# +[env:mks_robin_e3p] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.encrypt = Robin_e3p.bin +board_build.offset = 0x7000 +board_upload.offset_address = 0x08007000 +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103VE -DSS_TIMER=4 + -DTIMER_TONE=TIM3 -DTIMER_SERVO=TIM2 +debug_tool = jlink +upload_protocol = jlink + +# +# JGAurora A5S A1 (STM32F103ZET6) +# +[env:jgaurora_a5s_a1] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103ZE +board_build.variant = MARLIN_F103Zx +board_build.offset = 0xA000 +board_build.rename = firmware_for_sd_upload.bin +board_upload.offset_address = 0x0800A000 +build_flags = ${stm32_variant.build_flags} + -DSTM32F1xx -DSTM32_XL_DENSITY +extra_scripts = ${stm32_variant.extra_scripts} + buildroot/share/PlatformIO/scripts/jgaurora_a5s_a1_with_bootloader.py + +# +# FYSETC STM32F103RC +# +[env:STM32F103RC_fysetc] +platform = ${common_stm32.platform} +extends = common_STM32F103RC_variant +extra_scripts = ${common_STM32F103RC_variant.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103RC_fysetc.py +lib_ldf_mode = chain +debug_tool = stlink +upload_protocol = serial + +# +# Longer 3D board in Alfawise U20 (STM32F103VET6) +# +[env:STM32F103VE_longer] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103VE +board_build.variant = MARLIN_F103Vx +board_build.offset = 0x10000 +board_upload.offset_address = 0x08010000 +build_flags = ${stm32_variant.build_flags} + -DMCU_STM32F103VE -DU20 -DTS_V12 -DLED_BUILTIN=PC2 -UPIN_WIRE_SDA + -UPIN_WIRE_SCL -DPIN_WIRE_SDA=PB11 -DPIN_WIRE_SCL=PB10 + -DHAL_DAC_MODULE_DISABLED -DHAL_I2S_MODULE_DISABLED +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC -DHAL_PCD_MODULE_ENABLED +extra_scripts = ${stm32_variant.extra_scripts} + buildroot/share/PlatformIO/scripts/STM32F103VE_longer.py + +# +# TRIGORILLA PRO (STM32F103ZET6) +# +[env:trigorilla_pro] +platform = ${common_stm32.platform} +extends = env:mks_robin +extra_scripts = ${common_stm32.extra_scripts} + +# +# Chitu boards like Tronxy X5s (STM32F103ZET6) +# +[env:chitu_f103] +platform = ${common_stm32.platform} +extends = stm32_variant +board = genericSTM32F103ZE +board_build.variant = MARLIN_F103Zx +build_flags = ${stm32_variant.build_flags} + -DSTM32F1xx -DSTM32_XL_DENSITY +build_unflags = ${stm32_variant.build_unflags} + -DCONFIG_MAPLE_MINI_NO_DISABLE_DEBUG= + -DERROR_LED_PORT=GPIOE -DERROR_LED_PIN=6 +extra_scripts = ${stm32_variant.extra_scripts} + buildroot/share/PlatformIO/scripts/chitu_crypt.py + +# +# Some Chitu V5 boards have a problem with GPIO init. +# Use this target if G28 or G29 are always failing. +# +[env:chitu_v5_gpio_init] +platform = ${common_stm32.platform} +extends = env:chitu_f103 +build_flags = ${env:chitu_f103.build_flags} -DCHITU_V5_Z_MIN_BUGFIX diff --git a/ini/stm32f4.ini b/ini/stm32f4.ini index 6067bbc3b8..901f145113 100644 --- a/ini/stm32f4.ini +++ b/ini/stm32f4.ini @@ -12,8 +12,8 @@ # F : Foundation (sometimes High Performance F2/F4) # 4 : Cortex M4 core # 01 : Line/Features -# R : 64 or 66 pins (V:100, Z:144, I:176) -# G : 1024KB Flash-memory (C:256KB, D:384KB, E:512KB) +# R : 64 or 66 pins (T:36, C:48 or 49, M:81, V:100, Z:144, I:176) +# G : 1024KB Flash-memory (B:128KB, C:256KB, D:384KB, E:512KB) # T : LQFP package # 6 : -40...85°C (7: ...105°C) # @@ -27,7 +27,7 @@ platform = ${common_stm32.platform} extends = common_stm32 board = armed_v1 build_flags = ${common_stm32.build_flags} - -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing + -O2 -ffreestanding -fsigned-char -fno-move-loop-invariants -fno-strict-aliasing # # STM32F401VE @@ -35,53 +35,46 @@ build_flags = ${common_stm32.build_flags} # [env:STM32F401VE_STEVAL] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = marlin_STEVAL_STM32F401VE -build_flags = ${common_stm32.build_flags} - -DARDUINO_STEVAL -DSTM32F401xE - -DDISABLE_GENERIC_SERIALUSB -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${stm32_variant.build_flags} + -DSTM32F401xE -DDISABLE_GENERIC_SERIALUSB + -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS # # STM32F401RC # [env:FYSETC_CHEETAH_V20] -platform = ${common_stm32.platform} -extends = common_stm32 -board = marlin_FYSETC_CHEETAH_V20 -build_flags = ${common_stm32.build_flags} -DSTM32F401xC -DVECT_TAB_OFFSET=0xC000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_FYSETC_CHEETAH_V20 +board_build.offset = 0xC000 +build_flags = ${stm32_variant.build_flags} -DSTM32F401xC # # FLYF407ZG # [env:FLYF407ZG] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = marlin_STM32F407ZGT6 board_build.variant = MARLIN_FLY_F407ZG +board_build.offset = 0x8000 upload_protocol = dfu -build_flags = ${common_stm32.build_flags} - -DVECT_TAB_OFFSET=0x8000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py # # FYSETC S6 (STM32F446RET6 ARM Cortex-M4) # [env:FYSETC_S6] -platform = ${common_stm32.platform} -extends = common_stm32 -platform_packages = tool-stm32duino -board = marlin_fysetc_s6 -build_flags = ${common_stm32.build_flags} -DVECT_TAB_OFFSET=0x10000 -DHAL_PCD_MODULE_ENABLED -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -debug_tool = stlink -upload_protocol = dfu -upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE" +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_fysetc_s6 +board_build.offset = 0x10000 +board_upload.offset_address = 0x08010000 +build_flags = ${stm32_variant.build_flags} -DHAL_PCD_MODULE_ENABLED +debug_tool = stlink +upload_protocol = dfu +upload_command = dfu-util -a 0 -s 0x08010000:leave -D "$SOURCE" # # FYSETC S6 new bootloader @@ -92,10 +85,6 @@ extends = env:FYSETC_S6 board = marlin_fysetc_s6_8000 board_build.offset = 0x8000 board_upload.offset_address = 0x08008000 -build_flags = ${common_stm32.build_flags} -DHAL_PCD_MODULE_ENABLED -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py upload_command = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE" # @@ -105,13 +94,10 @@ upload_command = dfu-util -a 0 -s 0x08008000:leave -D "$SOURCE" # [env:STM32F407VE_black] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = marlin_blackSTM32F407VET6 -build_flags = ${common_stm32.build_flags} - -DARDUINO_BLACK_F407VE - -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +build_flags = ${stm32_variant.build_flags} + -DUSBD_USE_CDC_COMPOSITE -DUSE_USB_FS # # Anet ET4-MB_V1.x/ET4P-MB_V1.x (STM32F407VGT6 ARM Cortex-M4) @@ -119,172 +105,160 @@ extra_scripts = ${common.extra_scripts} # Comment out board_build.offset = 0x10000 if you don't plan to use OpenBLT/flashing directly to 0x08000000. # [env:Anet_ET4_OpenBLT] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED -board = marlin_STM32F407VGT6_CCM -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.encrypt = firmware.srec -# Just openblt.py (not stm32_bootloader.py) generates the file -board_build.offset = 0x10000 +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_STM32F407VGT6_CCM +board_build.variant = MARLIN_F4x7Vx +board_build.encrypt = firmware.srec +board_build.offset = 0x10000 board_upload.offset_address = 0x08010000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py - buildroot/share/PlatformIO/scripts/openblt.py +build_flags = ${stm32_variant.build_flags} + -DHAL_SD_MODULE_ENABLED -DHAL_SRAM_MODULE_ENABLED +build_unflags = ${stm32_variant.build_unflags} + -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 +extra_scripts = ${stm32_variant.extra_scripts} + buildroot/share/PlatformIO/scripts/openblt.py +debug_tool = jlink +upload_protocol = jlink # # BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) # [env:BIGTREE_SKR_PRO] -platform = ${common_stm32.platform} -extends = common_stm32 -board = marlin_BigTree_SKR_Pro -build_flags = ${common_stm32.build_flags} - -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -#upload_protocol = stlink -#upload_command = "$PROJECT_PACKAGES_DIR/tool-stm32duino/stlink/ST-LINK_CLI.exe" -c SWD -P "$BUILD_DIR/firmware.bin" 0x8008000 -Rst -Run -debug_tool = stlink -debug_init_break = - -# -# USB Flash Drive mix-ins for STM32 -# -[stm_flash_drive] -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip -build_flags = ${common_stm32.build_flags} - -DHAL_PCD_MODULE_ENABLED -DHAL_HCD_MODULE_ENABLED - -DUSBHOST -DUSBH_IRQ_PRIO=3 -DUSBH_IRQ_SUBPRIO=4 +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_BigTree_SKR_Pro +board_build.offset = 0x8000 +build_flags = ${stm32_variant.build_flags} -DSTM32F407_5ZX +debug_tool = stlink +upload_protocol = stlink # # BigTreeTech SKR Pro (STM32F407ZGT6 ARM Cortex-M4) with USB Flash Drive Support # [env:BIGTREE_SKR_PRO_usb_flash_drive] +platform = ${common_stm32.platform} extends = env:BIGTREE_SKR_PRO platform_packages = ${stm_flash_drive.platform_packages} -build_unflags = -DUSBCON -DUSBD_USE_CDC -build_flags = ${stm_flash_drive.build_flags} - -DSTM32F407_5ZX -DVECT_TAB_OFFSET=0x8000 +build_flags = ${stm_flash_drive.build_flags} -DSTM32F407_5ZX +build_unflags = ${env:BIGTREE_SKR_PRO.build_unflags} -DUSBCON -DUSBD_USE_CDC # # BigTreeTech E3 RRF (STM32F407VGT6 ARM Cortex-M4) # [env:BIGTREE_E3_RRF] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = marlin_STM32F407VGT6_CCM board_build.variant = MARLIN_BIGTREE_E3_RRF -build_flags = ${common_stm32.build_flags} - -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 - -DSERIAL_RX_BUFFER_SIZE=255 -DSERIAL_TX_BUFFER_SIZE=255 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +board_build.offset = 0x8000 +build_flags = ${stm32_variant.build_flags} + -DSTM32F407_5VX + -DSERIAL_RX_BUFFER_SIZE=255 + -DSERIAL_TX_BUFFER_SIZE=255 # # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) # [env:BIGTREE_GTR_V1_0] -platform = ${common_stm32.platform} -extends = common_stm32 -board = marlin_BigTree_GTR_v1 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -build_flags = ${common_stm32.build_flags} - -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_BigTree_GTR_v1 +board_build.offset = 0x8000 +build_flags = ${stm32_variant.build_flags} -DSTM32F407IX # # Bigtreetech GTR V1.0 (STM32F407IGT6 ARM Cortex-M4) with USB Flash Drive Support # [env:BIGTREE_GTR_V1_0_usb_flash_drive] +platform = ${common_stm32.platform} extends = env:BIGTREE_GTR_V1_0 platform_packages = ${stm_flash_drive.platform_packages} -build_unflags = -DUSBCON -DUSBD_USE_CDC -build_flags = ${stm_flash_drive.build_flags} - -DSTM32F407IX -DVECT_TAB_OFFSET=0x8000 +build_flags = ${stm_flash_drive.build_flags} -DSTM32F407IX +build_unflags = ${env:BIGTREE_GTR_V1_0.build_unflags} -DUSBCON -DUSBD_USE_CDC # # BigTreeTech BTT002 V1.0 (STM32F407VGT6 ARM Cortex-M4) # [env:BIGTREE_BTT002] -platform = ${common_stm32.platform} -extends = common_stm32 -board = marlin_BigTree_BTT002 -build_flags = ${common_stm32.build_flags} - -DSTM32F407_5VX -DVECT_TAB_OFFSET=0x8000 - -DHAVE_HWSERIAL2 - -DHAVE_HWSERIAL3 - -DPIN_SERIAL2_RX=PD_6 - -DPIN_SERIAL2_TX=PD_5 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_BigTree_BTT002 +board_build.offset = 0x8000 +build_flags = ${stm32_variant.build_flags} + -DSTM32F407_5VX + -DHAVE_HWSERIAL2 + -DHAVE_HWSERIAL3 + -DPIN_SERIAL2_RX=PD_6 + -DPIN_SERIAL2_TX=PD_5 # # BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Flash Drive Support # [env:BIGTREE_SKR_2] -platform = ${common_stm32.platform} -platform_packages = ${stm_flash_drive.platform_packages} -extends = common_stm32 -board = marlin_STM32F407VGT6_CCM -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.offset = 0x8000 +platform = ${common_stm32.platform} +extends = stm32_variant +platform_packages = ${stm_flash_drive.platform_packages} +board = marlin_STM32F407VGT6_CCM +board_build.variant = MARLIN_F4x7Vx +board_build.offset = 0x8000 board_upload.offset_address = 0x08008000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py -build_flags = ${stm_flash_drive.build_flags} - -DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 - -DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED +build_flags = ${stm_flash_drive.build_flags} + -DUSE_USBHOST_HS -DUSE_USB_HS_IN_FS + -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 + -DHSE_VALUE=8000000U -DHAL_SD_MODULE_ENABLED + +# +# BigTreeTech SKR V2.0 (STM32F407VGT6 ARM Cortex-M4) with USB Media Share Support +# +[env:BIGTREE_SKR_2_USB] +platform = ${common_stm32.platform} +extends = env:BIGTREE_SKR_2 +build_flags = ${env:BIGTREE_SKR_2.build_flags} -DUSBD_USE_CDC_MSC +build_unflags = ${env:BIGTREE_SKR_2.build_unflags} -DUSBD_USE_CDC # # BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4) # [env:BIGTREE_OCTOPUS_V1] -platform = ${common_stm32.platform} -extends = common_stm32 -board = marlin_BigTree_Octopus_v1 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -build_flags = ${common_stm32.build_flags} - -DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 -DUSE_USB_HS_IN_FS +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_BigTree_Octopus_v1 +board_build.offset = 0x8000 +build_flags = ${stm32_variant.build_flags} + -DSTM32F446_5VX -DUSE_USB_HS_IN_FS # # BigTreeTech Octopus V1.0/1.1 (STM32F446ZET6 ARM Cortex-M4) with USB Flash Drive Support # [env:BIGTREE_OCTOPUS_V1_USB] +platform = ${common_stm32.platform} extends = env:BIGTREE_OCTOPUS_V1 platform_packages = ${stm_flash_drive.platform_packages} -#build_unflags = -DUSBCON -DUSBD_USE_CDC +build_unflags = -DUSBD_USE_CDC build_flags = ${stm_flash_drive.build_flags} - -DSTM32F446_5VX -DVECT_TAB_OFFSET=0x8000 - -DUSBCON -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5 -DUSBD_IRQ_SUBPRIO=6 -DUSE_USB_HS_IN_FS -DUSBD_USE_CDC_MSC + -DSTM32F446_5VX -DUSE_USB_HS_IN_FS + -DUSE_USBHOST_HS -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSBD_USE_CDC_MSC # # Lerdge base # [lerdge_common] platform = ${common_stm32.platform} -extends = common_stm32 +extends = stm32_variant board = marlin_STM32F407ZGT6 board_build.variant = MARLIN_LERDGE -board_build.offset = 0x10000 board_build.encrypt = firmware.bin -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +board_build.offset = 0x10000 +build_flags = ${stm32_variant.build_flags} + -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4 + -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE + -DHAL_SRAM_MODULE_ENABLED +build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 +extra_scripts = ${stm32_variant.extra_scripts} buildroot/share/PlatformIO/scripts/lerdge.py -build_flags = ${common_stm32.build_flags} - -DSTM32F4 -DSTM32F4xx -DTARGET_STM32F4 - -DDISABLE_GENERIC_SERIALUSB -DARDUINO_ARCH_STM32 -DARDUINO_LERDGE - -DHAL_SRAM_MODULE_ENABLED -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -DUSBD_VID=0x0483 # # Lerdge X @@ -343,42 +317,33 @@ build_flags = ${stm_flash_drive.build_flags} ${lerdge_common.build_flags} # [env:rumba32] platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} - -Os - -DHAL_PCD_MODULE_ENABLED - -DDISABLE_GENERIC_SERIALUSB - -DHAL_UART_MODULE_ENABLED - -DTIMER_SERIAL=TIM9 +extends = stm32_variant board = rumba32_f446ve -upload_protocol = dfu -monitor_speed = 500000 -board_build.core = stm32 board_build.variant = MARLIN_F446VE board_build.offset = 0x0000 -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +build_flags = ${stm32_variant.build_flags} + -Os -DHAL_PCD_MODULE_ENABLED + -DDISABLE_GENERIC_SERIALUSB + -DHAL_UART_MODULE_ENABLED + -DTIMER_SERIAL=TIM9 +monitor_speed = 500000 +upload_protocol = dfu # # MKS Robin Pro V2 # [env:mks_robin_pro2] -platform = ${common_stm32.platform} -platform_packages = ${stm_flash_drive.platform_packages} -extends = common_stm32 -build_flags = ${stm_flash_drive.build_flags} -board = genericSTM32F407VET6 -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.offset = 0x0000 +platform = ${common_stm32.platform} +extends = stm32_variant +platform_packages = ${stm_flash_drive.platform_packages} +board = genericSTM32F407VET6 +board_build.variant = MARLIN_F4x7Vx +board_build.offset = 0x0000 board_upload.offset_address = 0x08000000 -build_unflags = ${common_stm32.build_unflags} -DUSBCON -DUSBD_USE_CDC -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +build_flags = ${stm_flash_drive.build_flags} +build_unflags = ${stm32_variant.build_unflags} -DUSBCON -DUSBD_USE_CDC +debug_tool = jlink +upload_protocol = jlink # # This SPI is used by Robin Nano V3 @@ -390,36 +355,31 @@ build_flags = -DPIN_WIRE_SCL=PB6 -DPIN_WIRE_SDA=PB7 # MKS Robin Nano V3 # [env:mks_robin_nano_v3] -platform = ${common_stm32.platform} -extends = common_stm32 -build_flags = ${common_stm32.build_flags} ${stm32f4_I2C1.build_flags} -DHAL_PCD_MODULE_ENABLED -DUSBCON -DUSBD_USE_CDC -board = marlin_STM32F407VGT6_CCM -board_build.core = stm32 -board_build.variant = MARLIN_F4x7Vx -board_build.rename = Robin_nano_v3.bin -board_build.offset = 0xC000 +platform = ${common_stm32.platform} +extends = stm32_variant +board = marlin_STM32F407VGT6_CCM +board_build.variant = MARLIN_F4x7Vx +board_build.offset = 0xC000 +board_build.rename = Robin_nano_v3.bin board_upload.offset_address = 0x0800C000 -build_unflags = ${common_stm32.build_unflags} -debug_tool = jlink -upload_protocol = jlink -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py - buildroot/share/PlatformIO/scripts/stm32_bootloader.py +build_flags = ${stm32_variant.build_flags} ${stm32f4_I2C1.build_flags} + -DHAL_PCD_MODULE_ENABLED +debug_tool = jlink +upload_protocol = jlink # # MKS Robin Nano V3 with USB Flash Drive Support # Currently, using a STM32duino fork, until USB Host get merged # [env:mks_robin_nano_v3_usb_flash_drive] +platform = ${common_stm32.platform} extends = env:mks_robin_nano_v3 platform_packages = ${stm_flash_drive.platform_packages} build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} - -DUSBCON - -DUSE_USBHOST_HS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSE_USB_HS_IN_FS - -DUSBD_USE_CDC + -DUSE_USBHOST_HS + -DUSBD_IRQ_PRIO=5 + -DUSBD_IRQ_SUBPRIO=6 + -DUSE_USB_HS_IN_FS # # MKS Robin Nano V3 with USB Flash Drive Support and Shared Media @@ -427,13 +387,6 @@ build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} # [env:mks_robin_nano_v3_usb_flash_drive_msc] platform = ${common_stm32.platform} -extends = env:mks_robin_nano_v3 -platform_packages = framework-arduinoststm32@https://github.com/rhapsodyv/Arduino_Core_STM32/archive/usb-host-msc-cdc-msc-3.zip -build_unflags = ${common_stm32.build_unflags} -DUSBD_USE_CDC -build_flags = ${stm_flash_drive.build_flags} ${stm32f4_I2C1.build_flags} - -DUSBCON - -DUSE_USBHOST_HS - -DUSBD_IRQ_PRIO=5 - -DUSBD_IRQ_SUBPRIO=6 - -DUSE_USB_HS_IN_FS - -DUSBD_USE_CDC_MSC +extends = env:mks_robin_nano_v3_usb_flash_drive +build_flags = ${env:mks_robin_nano_v3_usb_flash_drive} + -DUSBD_USE_CDC_MSC diff --git a/ini/stm32f7.ini b/ini/stm32f7.ini index 76d039533c..984b25162e 100644 --- a/ini/stm32f7.ini +++ b/ini/stm32f7.ini @@ -37,29 +37,3 @@ build_flags = ${common_stm32.build_flags} -DTIMER_SERIAL=TIM9 platform = ${common_stm32.platform} extends = common_stm32 board = remram_v1 -build_flags = ${common_stm32.build_flags} - -# -# BigTreeTech SKR SE BX (STM32H743IIT6 ARM Cortex-M7) -# -[env:BTT_SKR_SE_BX] -platform = ${common_stm32.platform} -platform_packages = ${stm_flash_drive.platform_packages} -extends = common_stm32 -board = marlin_BTT_SKR_SE_BX -extra_scripts = ${common.extra_scripts} - pre:buildroot/share/PlatformIO/scripts/generic_create_variant.py -build_flags = ${common_stm32.build_flags} - ${stm_flash_drive.build_flags} - -DUSE_USBHOST_HS - -DUSE_USB_HS_IN_FS - #-DUSBD_USE_CDC_MSC - -DVECT_TAB_OFFSET=0x20000 - -DHAL_DMA2D_MODULE_ENABLED - -DHAL_LTDC_MODULE_ENABLED - -DHAL_SDRAM_MODULE_ENABLED - -DHAL_QSPI_MODULE_ENABLED - -DHAL_MDMA_MODULE_ENABLED - -DHAL_SD_MODULE_ENABLED -upload_protocol = cmsis-dap -debug_tool = cmsis-dap diff --git a/ini/stm32h7.ini b/ini/stm32h7.ini new file mode 100644 index 0000000000..3d0753a235 --- /dev/null +++ b/ini/stm32h7.ini @@ -0,0 +1,41 @@ +# +# Marlin Firmware +# PlatformIO Configuration File +# + +################################# +# +# STM32H7 Architecture +# +# Naming Example: STM32H743IIT6 +# +# H : High Performance +# 7 : Cortex M7 core +# 43 : Line/Features +# I : 176 pins +# I : 2048KB Flash-memory +# T : LQFP package +# 6 : -40...85°C (7: ...105°C) +# +################################# + +# +# BigTreeTech SKR SE BX (STM32H743IIT6 ARM Cortex-M7) +# +[env:BTT_SKR_SE_BX] +platform = ${common_stm32.platform} +extends = stm32_variant +platform_packages = ${stm_flash_drive.platform_packages} +board = marlin_BTT_SKR_SE_BX +board_build.offset = 0x20000 +build_flags = ${stm32_variant.build_flags} ${stm_flash_drive.build_flags} + -DUSE_USBHOST_HS + -DUSE_USB_HS_IN_FS + -DHAL_DMA2D_MODULE_ENABLED + -DHAL_LTDC_MODULE_ENABLED + -DHAL_SDRAM_MODULE_ENABLED + -DHAL_QSPI_MODULE_ENABLED + -DHAL_MDMA_MODULE_ENABLED + -DHAL_SD_MODULE_ENABLED +upload_protocol = cmsis-dap +debug_tool = cmsis-dap diff --git a/platformio.ini b/platformio.ini index aa78394014..78fb4e4932 100644 --- a/platformio.ini +++ b/platformio.ini @@ -364,11 +364,13 @@ extra_configs = ini/lpc176x.ini ini/native.ini ini/samd51.ini + ini/stm32-common.ini ini/stm32f0.ini ini/stm32f1-maple.ini ini/stm32f1.ini ini/stm32f4.ini ini/stm32f7.ini + ini/stm32h7.ini ini/teensy.ini #