From 91a094d8cb0f35c20f07cf862771ece427ca4754 Mon Sep 17 00:00:00 2001 From: InsanityAutomation Date: Sat, 12 Mar 2022 15:55:57 -0500 Subject: [PATCH] Update Configuration.h --- Marlin/Configuration.h | 5 +++-- 1 file changed, 3 insertions(+), 2 deletions(-) diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index c2d5dced28..87fab7852b 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -1469,6 +1469,7 @@ #define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500. #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FILAMENT_RUNOUT_DEFAULT_MODE {1} // Array set that will take the place of FIL_RUNOUT_STATE and FIL_RUNOUT_ENABLED_DEFAULT as this code matures #define FIL_RUNOUT_STATE LOW // Pin state indicating that filament is NOT present. #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins. @@ -1510,13 +1511,13 @@ // Commands to execute on filament runout. // With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c") - // NOTE: After 'M412 H1' the host handles filament runout and this script does not apply. + // NOTE: After 'M591 H1' the host handles filament runout and this script does not apply. #define FILAMENT_RUNOUT_SCRIPT "M600" // After a runout is detected, continue printing this length of filament // before executing the runout script. Useful for a sensor at the end of // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead. - //#define FILAMENT_RUNOUT_DISTANCE_MM 25 + //#define FILAMENT_RUNOUT_DISTANCE_MM {25} #ifdef FILAMENT_RUNOUT_DISTANCE_MM // Enable this option to use an encoder disc that toggles the runout pin