From 9365fcc69af8a59be30f6145e1c38f648678a144 Mon Sep 17 00:00:00 2001 From: InsanityAutomation Date: Wed, 7 Nov 2018 11:03:49 -0500 Subject: [PATCH] Catchup to 1.1.9 Head --- Marlin/Conditionals_LCD.h | 12 +- Marlin/Conditionals_post.h | 154 +- Marlin/Configuration.h | 389 +-- Marlin/Configuration_adv.h | 247 +- Marlin/G26_Mesh_Validation_Tool.cpp | 12 +- Marlin/HAL.h | 5 +- Marlin/Makefile | 5 +- Marlin/Marlin.h | 103 +- Marlin/Marlin.ino | 2 +- Marlin/MarlinConfig.h | 1 + Marlin/Marlin_main.cpp | 1624 +++++++++---- Marlin/Max7219_Debug_LEDs.cpp | 516 ++-- Marlin/Max7219_Debug_LEDs.h | 114 +- Marlin/SanityCheck.h | 457 ++-- Marlin/Sd2Card.cpp | 2 +- Marlin/Version.h | 12 +- Marlin/cardreader.cpp | 20 +- Marlin/cardreader.h | 18 +- Marlin/configuration_store.cpp | 403 ++-- Marlin/drivers.h | 73 + Marlin/endstops.cpp | 69 +- Marlin/endstops.h | 12 +- Marlin/enum.h | 20 +- .../AlephObjects/TAZ4/Configuration.h | 366 +-- .../AlephObjects/TAZ4/Configuration_adv.h | 236 +- .../AliExpress/CL-260/Configuration.h | 376 +-- .../Anet/A2plus/Configuration.h | 1997 ++++++++++++++++ .../Anet/A2plus/Configuration_adv.h | 1654 +++++++++++++ .../Anet/A6/Configuration.h | 379 +-- .../Anet/A6/Configuration_adv.h | 236 +- .../Anet/A8/Configuration.h | 399 ++-- .../Anet/A8/Configuration_adv.h | 236 +- .../BIBO/TouchX/Cyclops/Configuration.h | 380 +-- .../BIBO/TouchX/Cyclops/Configuration_adv.h | 236 +- .../BIBO/TouchX/default/Configuration.h | 378 +-- .../BIBO/TouchX/default/Configuration_adv.h | 236 +- .../BQ/Hephestos/Configuration.h | 364 +-- .../BQ/Hephestos/Configuration_adv.h | 236 +- .../BQ/Hephestos_2/Configuration.h | 468 ++-- .../BQ/Hephestos_2/Configuration_adv.h | 316 +-- .../BQ/Hephestos_2/README.md | 33 +- .../BQ/Hephestos_2/_Bootscreen.h | 100 +- .../BQ/WITBOX/Configuration.h | 364 +-- .../BQ/WITBOX/Configuration_adv.h | 236 +- .../Cartesio/Configuration.h | 366 +-- .../Cartesio/Configuration_adv.h | 232 +- .../Creality/CR-10/Configuration.h | 366 +-- .../Creality/CR-10/Configuration_adv.h | 236 +- .../Creality/CR-10S/Configuration.h | 370 +-- .../Creality/CR-10S/Configuration_adv.h | 237 +- .../Creality/CR-10S/_Statusscreen.h | 5 +- .../Creality/CR-10mini/Configuration.h | 366 +-- .../Creality/CR-10mini/Configuration_adv.h | 236 +- .../Creality/CR-8/Configuration.h | 368 +-- .../Creality/CR-8/Configuration_adv.h | 237 +- .../Creality/Ender-2/Configuration.h | 370 +-- .../Creality/Ender-2/Configuration_adv.h | 236 +- .../Creality/Ender-3/Configuration.h | 1924 +++++++++++++++ .../Creality/Ender-3/Configuration_adv.h | 1654 +++++++++++++ .../Creality/Ender-3/README.md | 18 + .../Creality/Ender-3/_Bootscreen.h | 96 + .../Creality/Ender-3/_Statusscreen.h | 130 + .../Creality/Ender-4/Configuration.h | 366 +-- .../Creality/Ender-4/Configuration_adv.h | 236 +- .../Felix/Configuration.h | 364 +-- .../Felix/Configuration_adv.h | 236 +- .../Felix/DUAL/Configuration.h | 364 +-- .../FolgerTech/i3-2020/Configuration.h | 404 ++-- .../FolgerTech/i3-2020/Configuration_adv.h | 230 +- .../Geeetech/GT2560/Configuration.h | 364 +-- .../Geeetech/I3_Pro_X-GT2560/Configuration.h | 364 +-- .../Prusa i3 Pro B/bltouch/Configuration.h | 364 +-- .../Prusa i3 Pro B/noprobe/Configuration.h | 366 +-- .../Geeetech/Prusa i3 Pro C/Configuration.h | 1920 +++++++++++++++ .../Prusa i3 Pro C/Configuration_adv.h | 1654 +++++++++++++ .../Geeetech/Prusa i3 Pro W/Configuration.h | 1920 +++++++++++++++ .../Prusa i3 Pro W/Configuration_adv.h | 1654 +++++++++++++ .../Infitary/i3-M508/Configuration.h | 378 +-- .../Infitary/i3-M508/Configuration_adv.h | 236 +- .../JGAurora/A5/Configuration.h | 372 +-- .../JGAurora/A5/Configuration_adv.h | 236 +- .../Malyan/M150/Configuration.h | 401 ++-- .../Malyan/M150/Configuration_adv.h | 236 +- .../Micromake/C1/basic/Configuration.h | 364 +-- .../Micromake/C1/enhanced/Configuration.h | 368 +-- .../Micromake/C1/enhanced/Configuration_adv.h | 236 +- .../RepRapPro/Huxley/Configuration.h | 367 +-- .../RepRapWorld/Megatronics/Configuration.h | 366 +-- .../RigidBot/Configuration.h | 370 +-- .../RigidBot/Configuration_adv.h | 236 +- .../SCARA/Configuration.h | 369 +-- .../SCARA/Configuration_adv.h | 236 +- .../Sanguinololu/Configuration.h | 364 +-- .../Sanguinololu/Configuration_adv.h | 236 +- .../TinyBoy2/Configuration.h | 367 +-- .../TinyBoy2/Configuration_adv.h | 236 +- .../Tronxy/X1/Configuration.h | 374 +-- .../Tronxy/X3A/Configuration.h | 1924 +++++++++++++++ .../Tronxy/X3A/Configuration_adv.h | 1654 +++++++++++++ .../Tronxy/X5S/Configuration.h | 382 +-- .../Tronxy/XY100/Configuration.h | 370 +-- .../Velleman/K8200/Configuration.h | 364 +-- .../Velleman/K8200/Configuration_adv.h | 220 +- .../Velleman/K8400/Configuration.h | 377 +-- .../Velleman/K8400/Configuration_adv.h | 236 +- .../Velleman/K8400/Dual-head/Configuration.h | 377 +-- .../Wanhao/Duplicator 6/Configuration.h | 375 +-- .../Wanhao/Duplicator 6/Configuration_adv.h | 236 +- .../adafruit/ST7565/Configuration.h | 358 ++- .../delta/Anycubic/Kossel/Configuration.h | 2116 +++++++++++++++++ .../delta/Anycubic/Kossel/Configuration_adv.h | 1656 +++++++++++++ .../delta/Anycubic/Kossel/README.md | 50 + .../Anycubic/Kossel/images/Version1Probe.jpg | Bin 0 -> 94933 bytes .../Anycubic/Kossel/images/Version2Probe.jpg | Bin 0 -> 51853 bytes .../FLSUN/auto_calibrate/Configuration.h | 389 +-- .../FLSUN/auto_calibrate/Configuration_adv.h | 236 +- .../delta/FLSUN/kossel/Configuration.h | 374 +-- .../delta/FLSUN/kossel/Configuration_adv.h | 236 +- .../delta/FLSUN/kossel_mini/Configuration.h | 373 +-- .../FLSUN/kossel_mini/Configuration_adv.h | 236 +- .../delta/Hatchbox_Alpha/Configuration.h | 392 +-- .../delta/generic/Configuration.h | 369 +-- .../delta/generic/Configuration_adv.h | 236 +- .../delta/kossel_mini/Configuration.h | 372 +-- .../delta/kossel_mini/Configuration_adv.h | 236 +- .../delta/kossel_pro/Configuration.h | 378 +-- .../delta/kossel_pro/Configuration_adv.h | 236 +- .../delta/kossel_xl/Configuration.h | 369 +-- .../delta/kossel_xl/Configuration_adv.h | 236 +- .../gCreate/gMax1.5+/Configuration.h | 383 +-- .../gCreate/gMax1.5+/Configuration_adv.h | 236 +- .../hangprinter/Configuration.h | 2094 ++++++++++++++++ .../hangprinter/Configuration_adv.h | 1707 +++++++++++++ .../makibox/Configuration.h | 364 +-- .../makibox/Configuration_adv.h | 236 +- .../tvrrug/Round2/Configuration.h | 364 +-- .../tvrrug/Round2/Configuration_adv.h | 236 +- .../wt150/Configuration.h | 370 +-- .../wt150/Configuration_adv.h | 237 +- Marlin/fastio_1280.h | 5 +- Marlin/fwretract.cpp | 12 +- Marlin/language.h | 28 +- Marlin/language_an.h | 1 + Marlin/language_bg.h | 1 + Marlin/language_ca.h | 1 + Marlin/language_cn.h | 1 + Marlin/language_cz.h | 1 + Marlin/language_cz_utf8.h | 9 + Marlin/language_da.h | 1 + Marlin/language_de.h | 1 + Marlin/language_el-gr.h | 1 + Marlin/language_el.h | 1 + Marlin/language_en.h | 6 + Marlin/language_es.h | 1 + Marlin/language_es_utf8.h | 1 + Marlin/language_eu.h | 1 + Marlin/language_fi.h | 1 + Marlin/language_fr.h | 48 +- Marlin/language_fr_utf8.h | 19 +- Marlin/language_gl.h | 2 +- Marlin/language_hr.h | 1 + Marlin/language_it.h | 1 + Marlin/language_kana.h | 1 + Marlin/language_kana_utf8.h | 1 + Marlin/language_nl.h | 1 + Marlin/language_pl-DOGM.h | 1 + Marlin/language_pl-HD44780.h | 1 + Marlin/language_pt-br.h | 1 + Marlin/language_pt-br_utf8.h | 1 + Marlin/language_pt.h | 1 + Marlin/language_pt_utf8.h | 1 + Marlin/language_ru.h | 1 + Marlin/language_sk_utf8.h | 1 + Marlin/language_tr.h | 1 + Marlin/language_uk.h | 1 + Marlin/language_zh_CN.h | 1 + Marlin/language_zh_TW.h | 1 + Marlin/macros.h | 19 +- Marlin/malyanlcd.cpp | 50 +- Marlin/nozzle.cpp | 8 +- Marlin/parser.h | 8 +- Marlin/pca9632.cpp | 2 +- Marlin/pins.h | 69 +- Marlin/pinsDebug.h | 2 - Marlin/pinsDebug_list.h | 12 + Marlin/pins_ANET_10.h | 4 +- Marlin/pins_EINSY_RAMBO.h | 11 +- Marlin/pins_EINSY_RETRO.h | 6 +- Marlin/pins_RAMPS.h | 52 +- Marlin/pins_RIGIDBOARD.h | 1 + Marlin/pins_RUMBA.h | 4 +- Marlin/pins_TRIGORILLA_14.h | 49 +- Marlin/pins_ULTIMAKER.h | 2 +- Marlin/planner.cpp | 337 ++- Marlin/planner.h | 113 +- Marlin/planner_bezier.cpp | 38 +- Marlin/power.cpp | 26 +- Marlin/power_loss_recovery.cpp | 20 +- Marlin/runout.h | 2 +- Marlin/status_screen_DOGM.h | 6 +- Marlin/status_screen_lite_ST7920.h | 66 +- Marlin/stepper.cpp | 211 +- Marlin/stepper.h | 28 +- Marlin/stepper_indirection.cpp | 332 +-- Marlin/stepper_indirection.h | 96 +- Marlin/temperature.cpp | 331 ++- Marlin/temperature.h | 2 + Marlin/thermistortable_501.h | 4 +- Marlin/thermistortable_71.h | 82 +- Marlin/thermistortables.h | 4 +- Marlin/tmc_util.cpp | 92 +- Marlin/tmc_util.h | 6 +- Marlin/twibus.cpp | 6 +- Marlin/twibus.h | 13 +- Marlin/ubl.cpp | 4 +- Marlin/ubl.h | 1 - Marlin/ubl_G29.cpp | 8 +- Marlin/ubl_motion.cpp | 45 +- Marlin/ultralcd.cpp | 73 +- Marlin/ultralcd.h | 10 +- Marlin/ultralcd_impl_DOGM.h | 32 +- Marlin/ultralcd_impl_HD44780.h | 49 +- Marlin/ultralcd_st7565_u8glib_VIKI.h | 4 +- Marlin/ultralcd_st7920_u8glib_rrd.h | 2 +- 224 files changed, 47700 insertions(+), 14488 deletions(-) create mode 100644 Marlin/drivers.h create mode 100644 Marlin/example_configurations/Anet/A2plus/Configuration.h create mode 100644 Marlin/example_configurations/Anet/A2plus/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/Configuration.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/README.md create mode 100644 Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h create mode 100644 Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h create mode 100644 Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h create mode 100644 Marlin/example_configurations/Tronxy/X3A/Configuration.h create mode 100644 Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/README.md create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg create mode 100644 Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg create mode 100644 Marlin/example_configurations/hangprinter/Configuration.h create mode 100644 Marlin/example_configurations/hangprinter/Configuration_adv.h diff --git a/Marlin/Conditionals_LCD.h b/Marlin/Conditionals_LCD.h index 2cd7504326..7d8dabb310 100644 --- a/Marlin/Conditionals_LCD.h +++ b/Marlin/Conditionals_LCD.h @@ -439,10 +439,20 @@ */ #if ENABLED(DISTINCT_E_FACTORS) && E_STEPPERS > 1 #define XYZE_N (XYZ + E_STEPPERS) + #if ENABLED(HANGPRINTER) + #define NUM_AXIS_N (ABCD + E_STEPPERS) + #else + #define NUM_AXIS_N (XYZ + E_STEPPERS) + #endif #define E_AXIS_N (E_AXIS + extruder) #else #undef DISTINCT_E_FACTORS #define XYZE_N XYZE + #if ENABLED(HANGPRINTER) + #define NUM_AXIS_N ABCDE + #else + #define NUM_AXIS_N XYZE + #endif #define E_AXIS_N E_AXIS #endif @@ -496,7 +506,7 @@ * Set flags for enabled probes */ #define HAS_BED_PROBE (ENABLED(FIX_MOUNTED_PROBE) || ENABLED(Z_PROBE_ALLEN_KEY) || HAS_Z_SERVO_PROBE || ENABLED(Z_PROBE_SLED) || ENABLED(SOLENOID_PROBE)) -#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY)) +#define PROBE_SELECTED (HAS_BED_PROBE || ENABLED(PROBE_MANUALLY) || ENABLED(MESH_BED_LEVELING)) #if !HAS_BED_PROBE // Clear probe pin settings when no probe is selected diff --git a/Marlin/Conditionals_post.h b/Marlin/Conditionals_post.h index 924ac46ba6..3707d77413 100644 --- a/Marlin/Conditionals_post.h +++ b/Marlin/Conditionals_post.h @@ -29,7 +29,7 @@ #define CONDITIONALS_POST_H #define IS_SCARA (ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA)) -#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA) +#define IS_KINEMATIC (ENABLED(DELTA) || IS_SCARA || ENABLED(HANGPRINTER)) #define IS_CARTESIAN !IS_KINEMATIC /** @@ -47,7 +47,7 @@ #define Y_BED_SIZE Y_MAX_LENGTH #endif -// Require 0,0 bed center for Delta and SCARA +// Require 0,0 bed center for Delta, SCARA, and HANGPRINTER #if IS_KINEMATIC #define BED_CENTER_AT_0_0 #endif @@ -68,6 +68,18 @@ #define Y_MIN_BED (Y_CENTER - (Y_BED_SIZE) / 2) #define Y_MAX_BED (Y_CENTER + (Y_BED_SIZE) / 2) +/** + * Dual X Carriage + */ +#if ENABLED(DUAL_X_CARRIAGE) + #ifndef X1_MIN_POS + #define X1_MIN_POS X_MIN_POS + #endif + #ifndef X1_MAX_POS + #define X1_MAX_POS X_BED_SIZE + #endif +#endif + /** * CoreXY, CoreXZ, and CoreYZ - and their reverse */ @@ -117,7 +129,7 @@ #ifdef MANUAL_X_HOME_POS #define X_HOME_POS MANUAL_X_HOME_POS #elif ENABLED(BED_CENTER_AT_0_0) - #if ENABLED(DELTA) + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) #define X_HOME_POS 0 #else #define X_HOME_POS ((X_BED_SIZE) * (X_HOME_DIR) * 0.5) @@ -133,7 +145,7 @@ #ifdef MANUAL_Y_HOME_POS #define Y_HOME_POS MANUAL_Y_HOME_POS #elif ENABLED(BED_CENTER_AT_0_0) - #if ENABLED(DELTA) + #if (ENABLED(DELTA) || ENABLED(HANGPRINTER)) #define Y_HOME_POS 0 #else #define Y_HOME_POS ((Y_BED_SIZE) * (Y_HOME_DIR) * 0.5) @@ -400,6 +412,63 @@ #define ARRAY_BY_HOTENDS(...) ARRAY_N(HOTENDS, __VA_ARGS__) #define ARRAY_BY_HOTENDS1(v1) ARRAY_BY_HOTENDS(v1, v1, v1, v1, v1, v1) +/** + * Driver Timings + * NOTE: Driver timing order is longest-to-shortest duration. + * Preserve this ordering when adding new drivers. + */ +#ifndef MINIMUM_STEPPER_DIR_DELAY + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_DIR_DELAY 15000 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_DIR_DELAY 1500 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_DIR_DELAY 650 + #elif HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_DIR_DELAY 500 + #elif HAS_DRIVER(A4988) + #define MINIMUM_STEPPER_DIR_DELAY 200 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MINIMUM_STEPPER_DIR_DELAY 20 + #else + #define MINIMUM_STEPPER_DIR_DELAY 200 // Expect at least 10µS since one Stepper ISR must transpire + #endif +#endif + +#ifndef MINIMUM_STEPPER_PULSE + #if HAS_DRIVER(TB6560) + #define MINIMUM_STEPPER_PULSE 30 + #elif HAS_DRIVER(TB6600) + #define MINIMUM_STEPPER_PULSE 3 + #elif HAS_DRIVER(DRV8825) + #define MINIMUM_STEPPER_PULSE 2 + #elif HAS_DRIVER(A4988) || HAS_DRIVER(LV8729) + #define MINIMUM_STEPPER_PULSE 1 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MINIMUM_STEPPER_PULSE 0 + #else + #define MINIMUM_STEPPER_PULSE 1 + #endif +#endif + +#ifndef MAXIMUM_STEPPER_RATE + #if HAS_DRIVER(TB6560) + #define MAXIMUM_STEPPER_RATE 15000 + #elif HAS_DRIVER(LV8729) + #define MAXIMUM_STEPPER_RATE 130000 + #elif HAS_DRIVER(TB6600) + #define MAXIMUM_STEPPER_RATE 150000 + #elif HAS_DRIVER(DRV8825) + #define MAXIMUM_STEPPER_RATE 250000 + #elif HAS_TRINAMIC || HAS_DRIVER(TMC2660) || HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC26X_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) + #define MAXIMUM_STEPPER_RATE 400000 + #elif HAS_DRIVER(A4988) + #define MAXIMUM_STEPPER_RATE 500000 + #else + #define MAXIMUM_STEPPER_RATE 500000 + #endif +#endif + /** * X_DUAL_ENDSTOPS endstop reassignment */ @@ -660,28 +729,42 @@ #define HAS_E4_MICROSTEPS (PIN_EXISTS(E4_MS1)) #define HAS_SOLENOID_4 (PIN_EXISTS(SOL4)) +#if ENABLED(HANGPRINTER) + #define HAS_A_ENABLE (PIN_EXISTS(A_ENABLE)) + #define HAS_A_DIR (PIN_EXISTS(A_DIR)) + #define HAS_A_STEP (PIN_EXISTS(A_STEP)) + #define HAS_A_MICROSTEPS (PIN_EXISTS(A_MS1)) + + #define HAS_B_ENABLE (PIN_EXISTS(B_ENABLE)) + #define HAS_B_DIR (PIN_EXISTS(B_DIR)) + #define HAS_B_STEP (PIN_EXISTS(B_STEP)) + #define HAS_B_MICROSTEPS (PIN_EXISTS(B_MS1)) + + #define HAS_C_ENABLE (PIN_EXISTS(C_ENABLE)) + #define HAS_C_DIR (PIN_EXISTS(C_DIR)) + #define HAS_C_STEP (PIN_EXISTS(C_STEP)) + #define HAS_C_MICROSTEPS (PIN_EXISTS(C_MS1)) + + #define HAS_D_ENABLE (PIN_EXISTS(D_ENABLE)) + #define HAS_D_DIR (PIN_EXISTS(D_DIR)) + #define HAS_D_STEP (PIN_EXISTS(D_STEP)) + #define HAS_D_MICROSTEPS (PIN_EXISTS(D_MS1)) +#endif + // Trinamic Stepper Drivers -#define HAS_TRINAMIC (ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) || ENABLED(IS_TRAMS)) -#define X_IS_TRINAMIC (ENABLED( X_IS_TMC2130) || ENABLED( X_IS_TMC2208) || ENABLED(IS_TRAMS)) -#define X2_IS_TRINAMIC (ENABLED(X2_IS_TMC2130) || ENABLED(X2_IS_TMC2208)) -#define Y_IS_TRINAMIC (ENABLED( Y_IS_TMC2130) || ENABLED( Y_IS_TMC2208) || ENABLED(IS_TRAMS)) -#define Y2_IS_TRINAMIC (ENABLED(Y2_IS_TMC2130) || ENABLED(Y2_IS_TMC2208)) -#define Z_IS_TRINAMIC (ENABLED( Z_IS_TMC2130) || ENABLED( Z_IS_TMC2208) || ENABLED(IS_TRAMS)) -#define Z2_IS_TRINAMIC (ENABLED(Z2_IS_TMC2130) || ENABLED(Z2_IS_TMC2208)) -#define E0_IS_TRINAMIC (ENABLED(E0_IS_TMC2130) || ENABLED(E0_IS_TMC2208) || ENABLED(IS_TRAMS)) -#define E1_IS_TRINAMIC (ENABLED(E1_IS_TMC2130) || ENABLED(E1_IS_TMC2208)) -#define E2_IS_TRINAMIC (ENABLED(E2_IS_TMC2130) || ENABLED(E2_IS_TMC2208)) -#define E3_IS_TRINAMIC (ENABLED(E3_IS_TMC2130) || ENABLED(E3_IS_TMC2208)) -#define E4_IS_TRINAMIC (ENABLED(E4_IS_TMC2130) || ENABLED(E4_IS_TMC2208)) +#define HAS_STEALTHCHOP (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208)) +#define HAS_STALLGUARD HAS_DRIVER(TMC2130) +#define AXIS_HAS_STEALTHCHOP(ST) ( AXIS_DRIVER_TYPE(ST, TMC2130) || AXIS_DRIVER_TYPE(ST, TMC2208) ) +#define AXIS_HAS_STALLGUARD(ST) AXIS_DRIVER_TYPE(ST, TMC2130) #if ENABLED(SENSORLESS_HOMING) // Disable Z axis sensorless homing if a probe is used to home the Z axis #if HOMING_Z_WITH_PROBE #undef Z_HOMING_SENSITIVITY #endif - #define X_SENSORLESS (ENABLED(X_IS_TMC2130) && defined(X_HOMING_SENSITIVITY)) - #define Y_SENSORLESS (ENABLED(Y_IS_TMC2130) && defined(Y_HOMING_SENSITIVITY)) - #define Z_SENSORLESS (ENABLED(Z_IS_TMC2130) && defined(Z_HOMING_SENSITIVITY)) + #define X_SENSORLESS (AXIS_HAS_STALLGUARD(X) && defined(X_HOMING_SENSITIVITY)) + #define Y_SENSORLESS (AXIS_HAS_STALLGUARD(Y) && defined(Y_HOMING_SENSITIVITY)) + #define Z_SENSORLESS (AXIS_HAS_STALLGUARD(Z) && defined(Z_HOMING_SENSITIVITY)) #endif // Endstops and bed probe @@ -1233,13 +1316,19 @@ #define Z_HOMING_HEIGHT Z_CLEARANCE_BETWEEN_PROBES #endif #endif -#ifndef Z_CLEARANCE_BETWEEN_PROBES - #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT -#endif -#if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT - #define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES -#else - #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT + +#if PROBE_SELECTED + #ifndef Z_CLEARANCE_BETWEEN_PROBES + #define Z_CLEARANCE_BETWEEN_PROBES Z_HOMING_HEIGHT + #endif + #if Z_CLEARANCE_BETWEEN_PROBES > Z_HOMING_HEIGHT + #define MANUAL_PROBE_HEIGHT Z_CLEARANCE_BETWEEN_PROBES + #else + #define MANUAL_PROBE_HEIGHT Z_HOMING_HEIGHT + #endif + #ifndef Z_CLEARANCE_MULTI_PROBE + #define Z_CLEARANCE_MULTI_PROBE Z_CLEARANCE_BETWEEN_PROBES + #endif #endif // Updated G92 behavior shifts the workspace @@ -1312,4 +1401,17 @@ #define HAS_FOLDER_SORTING (FOLDER_SORTING || ENABLED(SDSORT_GCODE)) #endif +/** + * MOV_AXIS: number of independent axes driving the tool head's translational movement + * NUM_AXIS: number of movement axes + 1 + * NUM_AXIS_N: number of movement axes + number of extruders (defined elsewhere) + */ +#if ENABLED(HANGPRINTER) + #define MOV_AXIS ABCD + #define NUM_AXIS ABCDE +#else + #define MOV_AXIS XYZ + #define NUM_AXIS XYZE +#endif + #endif // CONDITIONALS_POST_H diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 6acbfa49f0..b00ecd9f6b 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -40,7 +40,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -72,6 +72,13 @@ // example_configurations/SCARA and customize for your machine. // +//=========================================================================== +//============================= HANGPRINTER ================================= +//=========================================================================== +// For a Hangprinter start with the configuration file in the +// example_configurations/hangprinter directory and customize for your machine. +// + // @section info // User-specified version info of this build to display in [Pronterface, etc] terminal window during @@ -90,7 +97,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -133,7 +140,6 @@ // Optional custom name for your RepStrap or other custom machine // Displayed in the LCD "Ready" message #define CUSTOM_MACHINE_NAME "TM3D Mamorubot" -//#define UBL // Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) // You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) //#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" @@ -204,11 +210,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -262,6 +268,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -271,6 +278,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -302,7 +310,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -440,15 +448,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -525,10 +538,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +#define X_DRIVER_TYPE A4988 +#define Y_DRIVER_TYPE A4988 +#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -596,6 +652,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -646,6 +712,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -721,10 +788,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 3000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -748,6 +815,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -786,9 +854,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -910,13 +975,12 @@ * leveling in steps so you can manually adjust the Z height at each grid-point. * With an LCD controller the process is guided step-by-step. */ - //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR #if(!ENABLED(UBL)) -#define AUTO_BED_LEVELING_BILINEAR + #define AUTO_BED_LEVELING_BILINEAR #else -#define AUTO_BED_LEVELING_UBL + #define AUTO_BED_LEVELING_UBL #endif //#define MESH_BED_LEVELING @@ -942,7 +1006,7 @@ // For Cartesian machines, instead of dividing moves on mesh boundaries, // split up moves into short segments like a Delta. This follows the // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES + //#define SEGMENT_LEVELED_MOVES #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) /** @@ -1037,8 +1101,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1328,11 +1392,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1360,19 +1424,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1397,7 +1448,16 @@ * * Use CRC checks and retries on the SD communication. */ -#define SD_CHECK_AND_RETRY +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -1405,13 +1465,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 1 +//#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 5 +//#define ENCODER_STEPS_PER_MENU_ITEM 1 /** * Encoder Direction Options @@ -1428,7 +1488,7 @@ // // Set this option if CLOCKWISE causes values to DECREASE // -//#define REVERSE_ENCODER_DIRECTION +#define REVERSE_ENCODER_DIRECTION // // This option reverses the encoder direction for navigating LCD menus. @@ -1463,12 +1523,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1486,40 +1552,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1528,28 +1560,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1557,39 +1567,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1636,6 +1635,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1656,25 +1732,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1690,6 +1752,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1705,6 +1774,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1764,7 +1861,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,16 +1919,14 @@ * Set this manually if there are extra servos needing manual control. * Leave undefined or set to 0 to entirely disable the servo subsystem. */ -//#define NUM_SERVOS 1 // Servo index starts with 0 for M280 command +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command // Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. // 300ms is a good value but you can try less delay. // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 30cb787668..14a1ccaf45 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -269,7 +281,7 @@ // If you want endstops to stay on (by default) even when not homing // enable this option. Override at any time with M120, M121. -#define ENDSTOPS_ALWAYS_ON_DEFAULT +//#define ENDSTOPS_ALWAYS_ON_DEFAULT // @section extras @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -367,7 +384,7 @@ // Homing hits each endstop, retracts by these distances, then does a slower bump. #define X_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) //#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -588,7 +622,7 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - #define SDCARD_SORT_ALPHA + //#define SDCARD_SORT_ALPHA // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 0 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1015,39 +1074,21 @@ #define E4_SENSE_RESISTOR 91 #define E4_MICROSTEPS 16 -#endif +#endif // TMC26X // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1289,7 +1302,7 @@ #define E4_OVERCURRENT 2000 #define E4_STALLCURRENT 1500 -#endif +#endif // L6470 /** * TWI/I2C BUS @@ -1496,7 +1509,6 @@ #define USER_GCODE_5 "G26 \n" #endif - /** * Specify an action command to send to the host when the printer is killed. * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. @@ -1599,27 +1611,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1637,4 +1651,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/G26_Mesh_Validation_Tool.cpp b/Marlin/G26_Mesh_Validation_Tool.cpp index 8a3f951c8c..1d902f8dce 100644 --- a/Marlin/G26_Mesh_Validation_Tool.cpp +++ b/Marlin/G26_Mesh_Validation_Tool.cpp @@ -198,7 +198,7 @@ destination[X_AXIS] = current_position[X_AXIS]; destination[Y_AXIS] = current_position[Y_AXIS]; destination[Z_AXIS] = z; // We know the last_z==z or we wouldn't be in this block of code. - destination[E_AXIS] = current_position[E_AXIS]; + destination[E_CART] = current_position[E_CART]; G26_line_to_destination(feed_value); set_destination_from_current(); @@ -212,7 +212,7 @@ destination[X_AXIS] = rx; destination[Y_AXIS] = ry; - destination[E_AXIS] += e_delta; + destination[E_CART] += e_delta; G26_line_to_destination(feed_value); set_destination_from_current(); @@ -254,7 +254,7 @@ while (!is_lcd_clicked()) { lcd_chirp(); - destination[E_AXIS] += 0.25; + destination[E_CART] += 0.25; #ifdef PREVENT_LENGTHY_EXTRUDE Total_Prime += 0.25; if (Total_Prime >= EXTRUDE_MAXLENGTH) return G26_ERR; @@ -283,7 +283,7 @@ lcd_quick_feedback(true); #endif set_destination_from_current(); - destination[E_AXIS] += g26_prime_length; + destination[E_CART] += g26_prime_length; G26_line_to_destination(planner.max_feedrate_mm_s[E_AXIS] / 15.0); set_destination_from_current(); retract_filament(destination); @@ -697,7 +697,7 @@ if (turn_on_heaters() != G26_OK) goto LEAVE; - current_position[E_AXIS] = 0.0; + current_position[E_CART] = 0.0; sync_plan_position_e(); if (g26_prime_flag && prime_nozzle() != G26_OK) goto LEAVE; @@ -812,7 +812,7 @@ const float endpoint[XYZE] = { ex, ey, g26_layer_height, - current_position[E_AXIS] + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier) + current_position[E_CART] + (arc_length * g26_e_axis_feedrate * g26_extrusion_multiplier) }; if (dist_start > 2.0) { diff --git a/Marlin/HAL.h b/Marlin/HAL.h index bb985881c9..d5f79cd0f7 100644 --- a/Marlin/HAL.h +++ b/Marlin/HAL.h @@ -152,8 +152,6 @@ FORCE_INLINE void HAL_timer_start(const uint8_t timer_num, const uint32_t freque #define _CAT(a, ...) a ## __VA_ARGS__ #define HAL_timer_set_compare(timer, compare) (_CAT(TIMER_OCR_, timer) = compare) -#define HAL_timer_restrain(timer, interval_ticks) NOLESS(_CAT(TIMER_OCR_, timer), _CAT(TIMER_COUNTER_, timer) + interval_ticks) - #define HAL_timer_get_compare(timer) _CAT(TIMER_OCR_, timer) #define HAL_timer_get_count(timer) _CAT(TIMER_COUNTER_, timer) @@ -327,7 +325,8 @@ inline void HAL_adc_init(void) { #define HAL_START_ADC(pin) ADCSRB = 0; SET_ADMUX_ADCSRA(pin) #endif -#define HAL_READ_ADC ADC +#define HAL_READ_ADC() ADC +#define HAL_ADC_READY() !TEST(ADCSRA, ADSC) #define GET_PIN_MAP_PIN(index) index #define GET_PIN_MAP_INDEX(pin) pin diff --git a/Marlin/Makefile b/Marlin/Makefile index dfa65b7601..68fd055ab1 100644 --- a/Marlin/Makefile +++ b/Marlin/Makefile @@ -530,9 +530,8 @@ CSTANDARD = -std=gnu99 CXXSTANDARD = -std=gnu++11 CDEBUG = -g$(DEBUG) CWARN = -Wall -Wstrict-prototypes -CTUNING = -funsigned-char -funsigned-bitfields -fpack-struct \ - -fshort-enums -w -ffunction-sections -fdata-sections \ - -flto \ +CTUNING = -w -fsigned-char -funsigned-bitfields -fpack-struct \ + -fshort-enums -ffunction-sections -fdata-sections -flto \ -DARDUINO=$(ARDUINO_VERSION) ifneq ($(HARDWARE_MOTHERBOARD),) CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD} diff --git a/Marlin/Marlin.h b/Marlin/Marlin.h index ef4c0f2b06..46037b8455 100644 --- a/Marlin/Marlin.h +++ b/Marlin/Marlin.h @@ -96,7 +96,10 @@ extern const char axis_codes[XYZE]; /** * Mixing steppers synchronize their enable (and direction) together */ - #if MIXING_STEPPERS > 3 + #if MIXING_STEPPERS > 4 + #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); } + #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); } + #elif MIXING_STEPPERS > 3 #define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); } #define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); } #elif MIXING_STEPPERS > 2 @@ -159,6 +162,42 @@ extern const char axis_codes[XYZE]; #endif // !MIXING_EXTRUDER +#if ENABLED(HANGPRINTER) + + #define enable_A() enable_X() + #define enable_B() enable_Y() + #define enable_C() enable_Z() + #define __D_ENABLE(p) E##p##_ENABLE_WRITE(E_ENABLE_ON) + #define _D_ENABLE(p) __D_ENABLE(p) + #define enable_D() _D_ENABLE(EXTRUDERS) + + // Don't allow any axes to be disabled + #undef disable_X + #undef disable_Y + #undef disable_Z + #define disable_X() NOOP + #define disable_Y() NOOP + #define disable_Z() NOOP + + #if EXTRUDERS >= 1 + #undef disable_E1 + #define disable_E1() NOOP + #if EXTRUDERS >= 2 + #undef disable_E2 + #define disable_E2() NOOP + #if EXTRUDERS >= 3 + #undef disable_E3 + #define disable_E3() NOOP + #if EXTRUDERS >= 4 + #undef disable_E4 + #define disable_E4() NOOP + #endif // EXTRUDERS >= 4 + #endif // EXTRUDERS >= 3 + #endif // EXTRUDERS >= 2 + #endif // EXTRUDERS >= 1 + +#endif // HANGPRINTER + #if ENABLED(G38_PROBE_TARGET) extern bool G38_move, // flag to tell the interrupt handler that a G38 command is being run G38_endstop_hit; // flag from the interrupt handler to indicate if the endstop went active @@ -193,8 +232,8 @@ extern bool Running; inline bool IsRunning() { return Running; } inline bool IsStopped() { return !Running; } -bool enqueue_and_echo_command(const char* cmd, bool say_ok=false); // Add a single command to the end of the buffer. Return false on failure. -void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command. +bool enqueue_and_echo_command(const char* cmd); // Add a single command to the end of the buffer. Return false on failure. +void enqueue_and_echo_commands_P(const char * const cmd); // Set one or more commands to be prioritized over the next Serial/SD command. void clear_command_queue(); #if ENABLED(M100_FREE_MEMORY_WATCHER) || ENABLED(POWER_LOSS_RECOVERY) @@ -299,10 +338,18 @@ extern float soft_endstop_min[XYZ], soft_endstop_max[XYZ]; bool select_coordinate_system(const int8_t _new); #endif +void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false); + +void home_all_axes(); + void report_current_position(); #if IS_KINEMATIC - extern float delta[ABC]; + #if ENABLED(HANGPRINTER) + extern float line_lengths[ABCD]; + #else + extern float delta[ABC]; + #endif void inverse_kinematics(const float raw[XYZ]); #endif @@ -335,6 +382,51 @@ void report_current_position(); delta[C_AXIS] = DELTA_Z(V, C_AXIS); \ }while(0) +#elif ENABLED(HANGPRINTER) + + // Don't collect anchor positions in array because there are no A_x, D_x or D_y + extern float anchor_A_y, + anchor_A_z, + anchor_B_x, + anchor_B_y, + anchor_B_z, + anchor_C_x, + anchor_C_y, + anchor_C_z, + anchor_D_z, + delta_segments_per_second, + line_lengths_origin[ABCD]; + + void recalc_hangprinter_settings(); + + #define HANGPRINTER_IK(V) do { \ + line_lengths[A_AXIS] = SQRT(sq(anchor_A_z - V[Z_AXIS]) \ + + sq(anchor_A_y - V[Y_AXIS]) \ + + sq( V[X_AXIS])); \ + line_lengths[B_AXIS] = SQRT(sq(anchor_B_z - V[Z_AXIS]) \ + + sq(anchor_B_y - V[Y_AXIS]) \ + + sq(anchor_B_x - V[X_AXIS])); \ + line_lengths[C_AXIS] = SQRT(sq(anchor_C_z - V[Z_AXIS]) \ + + sq(anchor_C_y - V[Y_AXIS]) \ + + sq(anchor_C_x - V[X_AXIS])); \ + line_lengths[D_AXIS] = SQRT(sq( V[X_AXIS]) \ + + sq( V[Y_AXIS]) \ + + sq(anchor_D_z - V[Z_AXIS])); \ + }while(0) + + // Inverse kinematics at origin + #define HANGPRINTER_IK_ORIGIN(LL) do { \ + LL[A_AXIS] = SQRT(sq(anchor_A_z) \ + + sq(anchor_A_y)); \ + LL[B_AXIS] = SQRT(sq(anchor_B_z) \ + + sq(anchor_B_y) \ + + sq(anchor_B_x)); \ + LL[C_AXIS] = SQRT(sq(anchor_C_z) \ + + sq(anchor_C_y) \ + + sq(anchor_C_x)); \ + LL[D_AXIS] = anchor_D_z; \ + }while(0) + #elif IS_SCARA void forward_kinematics_SCARA(const float &a, const float &b); #endif @@ -499,6 +591,9 @@ void do_blocking_move_to_xy(const float &rx, const float &ry, const float &fr_mm inline bool position_is_reachable(const float &rx, const float &ry, const float inset=0) { #if ENABLED(DELTA) return HYPOT2(rx, ry) <= sq(DELTA_PRINTABLE_RADIUS - inset); + #elif ENABLED(HANGPRINTER) + // TODO: This is over simplified. Hangprinter's build volume is _not_ cylindrical. + return HYPOT2(rx, ry) <= sq(HANGPRINTER_PRINTABLE_RADIUS - inset); #elif IS_SCARA const float R2 = HYPOT2(rx - SCARA_OFFSET_X, ry - SCARA_OFFSET_Y); return ( diff --git a/Marlin/Marlin.ino b/Marlin/Marlin.ino index 1491c4efd5..e18a07b8cc 100644 --- a/Marlin/Marlin.ino +++ b/Marlin/Marlin.ino @@ -9,7 +9,7 @@ ================================================================================ -Greetings! Thank you for choosing Marlin 2 as your 3D printer firmware. +Greetings! Thank you for choosing Marlin as your 3D printer firmware. To configure Marlin you must edit Configuration.h and Configuration_adv.h located in the root 'Marlin' folder. Check the example_configurations folder to diff --git a/Marlin/MarlinConfig.h b/Marlin/MarlinConfig.h index f0aa130443..e1988fe637 100644 --- a/Marlin/MarlinConfig.h +++ b/Marlin/MarlinConfig.h @@ -28,6 +28,7 @@ #include "Version.h" #include "Configuration.h" #include "Conditionals_LCD.h" +#include "drivers.h" #include "Configuration_adv.h" #if USE_MARLINSERIAL diff --git a/Marlin/Marlin_main.cpp b/Marlin/Marlin_main.cpp index 3897f79577..da0cbd9678 100644 --- a/Marlin/Marlin_main.cpp +++ b/Marlin/Marlin_main.cpp @@ -51,6 +51,7 @@ * G3 - CCW ARC * G4 - Dwell S or P * G5 - Cubic B-spline with XYZE destination and IJPQ offsets + * G6 - Direct stepper move (Requires UNREGISTERED_MOVE_SUPPORT). Hangprinter defaults to relative moves. Others default to absolute moves. * G10 - Retract filament according to settings of M207 (Requires FWRETRACT) * G11 - Retract recover filament according to settings of M208 (Requires FWRETRACT) * G12 - Clean tool (Requires NOZZLE_CLEAN_FEATURE) @@ -72,6 +73,8 @@ * G90 - Use Absolute Coordinates * G91 - Use Relative Coordinates * G92 - Set current position to coordinates given + * G95 - Set torque mode (Requires MECHADUINO_I2C_COMMANDS enabled) + * G96 - Set encoder reference point (Requires MECHADUINO_I2C_COMMANDS enabled) * * "M" Codes * @@ -130,13 +133,14 @@ * M112 - Emergency stop. * M113 - Get or set the timeout interval for Host Keepalive "busy" messages. (Requires HOST_KEEPALIVE_FEATURE) * M114 - Report current position. + * - S1 Compute length traveled since last G96 using encoder position data (Requires MECHADUINO_I2C_COMMANDS, only kinematic axes) * M115 - Report capabilities. (Extended capabilities requires EXTENDED_CAPABILITIES_REPORT) * M117 - Display a message on the controller screen. (Requires an LCD) * M118 - Display a message in the host console. * M119 - Report endstops status. * M120 - Enable endstops detection. * M121 - Disable endstops detection. - * M122 - Debug stepper (Requires HAVE_TMC2130 or HAVE_TMC2208) + * M122 - Debug stepper (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) * M125 - Save current position and move to filament change position. (Requires PARK_HEAD_ON_PAUSE) * M126 - Solenoid Air Valve Open. (Requires BARICUDA) * M127 - Solenoid Air Valve Closed. (Requires BARICUDA) @@ -148,8 +152,8 @@ * M150 - Set Status LED Color as R U B P. Values 0-255. (Requires BLINKM, RGB_LED, RGBW_LED, NEOPIXEL_LED, or PCA9632). * M155 - Auto-report temperatures with interval of S. (Requires AUTO_REPORT_TEMPERATURES) * M163 - Set a single proportion for a mixing extruder. (Requires MIXING_EXTRUDER) - * M164 - Save the mix as a virtual extruder. (Requires MIXING_EXTRUDER and MIXING_VIRTUAL_TOOLS) - * M165 - Set the proportions for a mixing extruder. Use parameters ABCDHI to set the mixing factors. (Requires MIXING_EXTRUDER) + * M164 - Commit the mix (Req. MIXING_EXTRUDER) and optionally save as a virtual tool (Req. MIXING_VIRTUAL_TOOLS > 1) + * M165 - Set the mix for a mixing extruder wuth parameters ABCDHI. (Requires MIXING_EXTRUDER and DIRECT_MIXING_IN_G1) * M190 - Sxxx Wait for bed current temp to reach target temp. ** Waits only when heating! ** * Rxxx Wait for bed current temp to reach target temp. ** Waits for heating or cooling. ** * M200 - Set filament diameter, D, setting E axis units to cubic. (Use S0 to revert to linear units.) @@ -159,7 +163,7 @@ * M204 - Set default acceleration in units/sec^2: P R T * M205 - Set advanced settings. Current units apply: S T minimum speeds - B + Q X, Y, Z, E * M206 - Set additional homing offset. (Disabled by NO_WORKSPACE_OFFSETS or DELTA) * M207 - Set Retract Length: S, Feedrate: F, and Z lift: Z. (Requires FWRETRACT) @@ -202,11 +206,13 @@ * M501 - Restore parameters from EEPROM. (Requires EEPROM_SETTINGS) * M502 - Revert to the default "factory settings". ** Does not write them to EEPROM! ** * M503 - Print the current settings (in memory): "M503 S". S0 specifies compact output. + * M524 - Abort SD card print job started with M24 (Requires SDSUPPORT) * M540 - Enable/disable SD card abort on endstop hit: "M540 S". (Requires ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) * M600 - Pause for filament change: "M600 X Y Z E L". (Requires ADVANCED_PAUSE_FEATURE) * M603 - Configure filament change: "M603 T U L". (Requires ADVANCED_PAUSE_FEATURE) * M605 - Set Dual X-Carriage movement mode: "M605 S [X] [R]". (Requires DUAL_X_CARRIAGE) - * M665 - Set delta configurations: "M665 H L R S B X Y Z (Requires DELTA) + * M665 - Set Delta configurations: "M665 H L R S B X Y Z (Requires DELTA) + * M665 - Set Hangprinter configurations: "M665 W E R T Y U I O P S" (Requires HANGPRINTER) * M666 - Set/get endstop offsets for delta (Requires DELTA) or dual endstops (Requires [XYZ]_DUAL_ENDSTOPS). * M701 - Load filament (requires FILAMENT_LOAD_UNLOAD_GCODES) * M702 - Unload filament (requires FILAMENT_LOAD_UNLOAD_GCODES) @@ -223,13 +229,13 @@ * M868 - Report or set position encoder module error correction threshold. * M869 - Report position encoder module error. * M900 - Get or Set Linear Advance K-factor. (Requires LIN_ADVANCE) - * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires HAVE_TMC2130 or HAVE_TMC2208) + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) * M907 - Set digital trimpot motor current using axis codes. (Requires a board with digital trimpots) * M908 - Control digital trimpot directly. (Requires DAC_STEPPER_CURRENT or DIGIPOTSS_PIN) * M909 - Print digipot/DAC current value. (Requires DAC_STEPPER_CURRENT) * M910 - Commit digipot/DAC value to external EEPROM via I2C. (Requires DAC_STEPPER_CURRENT) - * M911 - Report stepper driver overtemperature pre-warn condition. (Requires HAVE_TMC2130 or HAVE_TMC2208) - * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires HAVE_TMC2130 or HAVE_TMC2208) + * M911 - Report stepper driver overtemperature pre-warn condition. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) + * M912 - Clear stepper driver overtemperature pre-warn condition flag. (Requires at least one _DRIVER_TYPE defined as TMC2130/TMC2208/TMC2660) * M913 - Set HYBRID_THRESHOLD speed. (Requires HYBRID_THRESHOLD) * M914 - Set SENSORLESS_HOMING sensitivity. (Requires SENSORLESS_HOMING) * @@ -437,12 +443,17 @@ static const char *injected_commands_P = NULL; * but the planner and stepper like mm/s units. */ static const float homing_feedrate_mm_s[] PROGMEM = { - #if ENABLED(DELTA) - MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), + #if ENABLED(HANGPRINTER) + MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), + MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), MMM_TO_MMS(DUMMY_HOMING_FEEDRATE), 0 #else - MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), + #if ENABLED(DELTA) + MMM_TO_MMS(HOMING_FEEDRATE_Z), MMM_TO_MMS(HOMING_FEEDRATE_Z), + #else + MMM_TO_MMS(HOMING_FEEDRATE_XY), MMM_TO_MMS(HOMING_FEEDRATE_XY), + #endif + MMM_TO_MMS(HOMING_FEEDRATE_Z), 0 #endif - MMM_TO_MMS(HOMING_FEEDRATE_Z), 0 }; FORCE_INLINE float homing_feedrate(const AxisEnum a) { return pgm_read_float(&homing_feedrate_mm_s[a]); } @@ -515,6 +526,13 @@ volatile bool wait_for_heatup = true; const char axis_codes[XYZE] = { 'X', 'Y', 'Z', 'E' }; +#if ENABLED(HANGPRINTER) + const char axis_codes_hangprinter[ABCDE] = { 'A', 'B', 'C', 'D', 'E' }; + #define RAW_AXIS_CODES(I) axis_codes_hangprinter[I] +#else + #define RAW_AXIS_CODES(I) axis_codes[I] +#endif + // Number of characters read in the current line of serial input static int serial_count; // = 0; @@ -617,6 +635,21 @@ uint8_t target_extruder; float delta_safe_distance_from_top(); +#elif ENABLED(HANGPRINTER) + + float anchor_A_y, + anchor_A_z, + anchor_B_x, + anchor_B_y, + anchor_B_z, + anchor_C_x, + anchor_C_y, + anchor_C_z, + anchor_D_z, + line_lengths[ABCD], + line_lengths_origin[ABCD], + delta_segments_per_second; + #endif #if ENABLED(AUTO_BED_LEVELING_BILINEAR) @@ -742,7 +775,6 @@ void set_current_from_steppers_for_axis(const AxisEnum axis); void plan_cubic_move(const float (&cart)[XYZE], const float (&offset)[4]); #endif -void tool_change(const uint8_t tmp_extruder, const float fr_mm_s=0.0, bool no_move=false); void report_current_position(); void report_current_position_detail(); @@ -770,14 +802,18 @@ void report_current_position_detail(); * * Set the planner/stepper positions directly from current_position with * no kinematic translation. Used for homing axes and cartesian/core syncing. + * + * This is not possible for Hangprinter because current_position and position are different sizes */ void sync_plan_position() { - #if ENABLED(DEBUG_LEVELING_FEATURE) - if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position", current_position); + #if DISABLED(HANGPRINTER) + #if ENABLED(DEBUG_LEVELING_FEATURE) + if (DEBUGGING(LEVELING)) DEBUG_POS("sync_plan_position", current_position); + #endif + planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART]); #endif - planner.set_position_mm(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); } -void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_AXIS]); } +void sync_plan_position_e() { planner.set_e_position_mm(current_position[E_CART]); } #if IS_KINEMATIC inline void sync_plan_position_kinematic() { @@ -799,10 +835,10 @@ extern "C" { int freeMemory() { int free_memory; - if ((int)__brkval == 0) - free_memory = ((int)&free_memory) - ((int)&__bss_end); + if (int(__brkval) == 0) + free_memory = (int(&free_memory)) - (int(&__bss_end)); else - free_memory = ((int)&free_memory) - ((int)__brkval); + free_memory = (int(&free_memory)) - (int(__brkval)); return free_memory; } } @@ -872,8 +908,8 @@ inline bool _enqueuecommand(const char* cmd, bool say_ok=false) { /** * Enqueue with Serial Echo */ -bool enqueue_and_echo_command(const char* cmd, bool say_ok/*=false*/) { - if (_enqueuecommand(cmd, say_ok)) { +bool enqueue_and_echo_command(const char* cmd) { + if (_enqueuecommand(cmd)) { SERIAL_ECHO_START(); SERIAL_ECHOPAIR(MSG_ENQUEUEING, cmd); SERIAL_CHAR('"'); @@ -1040,44 +1076,40 @@ inline void get_serial_commands() { gcode_N = strtol(npos + 1, NULL, 10); - if (gcode_N != gcode_LastN + 1 && !M110) { - gcode_line_error(PSTR(MSG_ERR_LINE_NO)); - return; - } + if (gcode_N != gcode_LastN + 1 && !M110) + return gcode_line_error(PSTR(MSG_ERR_LINE_NO)); char *apos = strrchr(command, '*'); if (apos) { uint8_t checksum = 0, count = uint8_t(apos - command); while (count) checksum ^= command[--count]; - if (strtol(apos + 1, NULL, 10) != checksum) { - gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH)); - return; - } - } - else { - gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); - return; + if (strtol(apos + 1, NULL, 10) != checksum) + return gcode_line_error(PSTR(MSG_ERR_CHECKSUM_MISMATCH)); } + else + return gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); gcode_LastN = gcode_N; } #if ENABLED(SDSUPPORT) - else if (card.saving) { - gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); - return; - } + else if (card.saving && strcmp(command, "M29") != 0) // No line number with M29 in Pronterface + return gcode_line_error(PSTR(MSG_ERR_NO_CHECKSUM)); #endif // Movement commands alert when stopped if (IsStopped()) { char* gpos = strchr(command, 'G'); if (gpos) { - const int codenum = strtol(gpos + 1, NULL, 10); - switch (codenum) { + switch (strtol(gpos + 1, NULL, 10)) { case 0: case 1: - case 2: - case 3: + #if ENABLED(ARC_SUPPORT) + case 2: + case 3: + #endif + #if ENABLED(BEZIER_CURVE_SUPPORT) + case 5: + #endif SERIAL_ERRORLNPGM(MSG_ERR_STOPPED); LCD_MESSAGEPGM(MSG_STOPPED); break; @@ -1330,7 +1362,7 @@ bool get_target_extruder_from_command(const uint16_t code) { if (axis == X_AXIS) { // In Dual X mode hotend_offset[X] is T1's home position - float dual_max_x = MAX(hotend_offset[X_AXIS][1], X2_MAX_POS); + const float dual_max_x = MAX(hotend_offset[X_AXIS][1], X2_MAX_POS); if (active_extruder != 0) { // T1 can move from X2_MIN_POS to X2_MAX_POS or X2 home position (whichever is larger) @@ -1554,9 +1586,13 @@ inline float get_homing_bump_feedrate(const AxisEnum axis) { /** * Move the planner to the current position from wherever it last moved * (or from wherever it has been told it is located). + * + * Impossible on Hangprinter because current_position and position are of different sizes */ inline void buffer_line_to_current_position() { - planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], feedrate_mm_s, active_extruder); + #if DISABLED(HANGPRINTER) // emptying this function probably breaks do_blocking_move_to() + planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], feedrate_mm_s, active_extruder); + #endif } /** @@ -1564,7 +1600,11 @@ inline void buffer_line_to_current_position() { * used by G0/G1/G2/G3/G5 and many other functions to set a destination. */ inline void buffer_line_to_destination(const float &fr_mm_s) { - planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS], fr_mm_s, active_extruder); + #if ENABLED(HANGPRINTER) + UNUSED(fr_mm_s); + #else + planner.buffer_line(destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_CART], fr_mm_s, active_extruder); + #endif } #if IS_KINEMATIC @@ -1583,7 +1623,7 @@ inline void buffer_line_to_destination(const float &fr_mm_s) { if ( current_position[X_AXIS] == destination[X_AXIS] && current_position[Y_AXIS] == destination[Y_AXIS] && current_position[Z_AXIS] == destination[Z_AXIS] - && current_position[E_AXIS] == destination[E_AXIS] + && current_position[E_CART] == destination[E_CART] ) return; planner.buffer_line_kinematic(destination, MMS_SCALED(fr_mm_s ? fr_mm_s : feedrate_mm_s), active_extruder); @@ -2294,7 +2334,7 @@ void clean_up_after_endstop_or_probe_move() { #endif // move up to make clearance for the probe - do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); #else @@ -2328,7 +2368,7 @@ void clean_up_after_endstop_or_probe_move() { #if MULTIPLE_PROBING > 2 probes_total += current_position[Z_AXIS]; - if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_BETWEEN_PROBES, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); + if (p > 1) do_blocking_move_to_z(current_position[Z_AXIS] + Z_CLEARANCE_MULTI_PROBE, MMM_TO_MMS(Z_PROBE_SPEED_FAST)); } #endif @@ -2482,6 +2522,8 @@ void clean_up_after_endstop_or_probe_move() { if (can_change && enable != planner.leveling_active) { + planner.synchronize(); + #if ENABLED(MESH_BED_LEVELING) if (!enable) @@ -2619,7 +2661,7 @@ void clean_up_after_endstop_or_probe_move() { for (uint8_t x = 0; x < sx; x++) { for (uint8_t i = 0; i < precision + 2 + (x < 10 ? 1 : 0); i++) SERIAL_PROTOCOLCHAR(' '); - SERIAL_PROTOCOL((int)x); + SERIAL_PROTOCOL(int(x)); } SERIAL_EOL(); #endif @@ -2631,14 +2673,14 @@ void clean_up_after_endstop_or_probe_move() { SERIAL_PROTOCOLPGM(" ["); // open sub-array #else if (y < 10) SERIAL_PROTOCOLCHAR(' '); - SERIAL_PROTOCOL((int)y); + SERIAL_PROTOCOL(int(y)); #endif for (uint8_t x = 0; x < sx; x++) { SERIAL_PROTOCOLCHAR(' '); const float offset = fn(x, y); if (!isnan(offset)) { if (offset >= 0) SERIAL_PROTOCOLCHAR('+'); - SERIAL_PROTOCOL_F(offset, precision); + SERIAL_PROTOCOL_F(offset, int(precision)); } else { #ifdef SCAD_MESH_OUTPUT @@ -2679,11 +2721,11 @@ void clean_up_after_endstop_or_probe_move() { if (DEBUGGING(LEVELING)) { SERIAL_ECHOPGM("Extrapolate ["); if (x < 10) SERIAL_CHAR(' '); - SERIAL_ECHO((int)x); + SERIAL_ECHO(int(x)); SERIAL_CHAR(xdir ? (xdir > 0 ? '+' : '-') : ' '); SERIAL_CHAR(' '); if (y < 10) SERIAL_CHAR(' '); - SERIAL_ECHO((int)y); + SERIAL_ECHO(int(y)); SERIAL_CHAR(ydir ? (ydir > 0 ? '+' : '-') : ' '); SERIAL_CHAR(']'); } @@ -2968,16 +3010,9 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa if (is_home_dir) { - if (axis == Z_AXIS) { - #if HOMING_Z_WITH_PROBE - #if ENABLED(BLTOUCH) - set_bltouch_deployed(true); - #endif - #if QUIET_PROBING - probing_pause(true); - #endif - #endif - } + #if HOMING_Z_WITH_PROBE && QUIET_PROBING + if (axis == Z_AXIS) probing_pause(true); + #endif // Disable stealthChop if used. Enable diag1 pin on driver. #if ENABLED(SENSORLESS_HOMING) @@ -2993,27 +3028,25 @@ static void do_homing_move(const AxisEnum axis, const float distance, const floa SYNC_PLAN_POSITION_KINEMATIC(); current_position[axis] = distance; inverse_kinematics(current_position); - planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + #elif ENABLED(HANGPRINTER) // TODO: Hangprinter homing is not finished (Jan 7, 2018) + SYNC_PLAN_POSITION_KINEMATIC(); + current_position[axis] = distance; + inverse_kinematics(current_position); + planner.buffer_line(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); #else sync_plan_position(); current_position[axis] = distance; // Set delta/cartesian axes directly - planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); + planner.buffer_line(current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], fr_mm_s ? fr_mm_s : homing_feedrate(axis), active_extruder); #endif planner.synchronize(); if (is_home_dir) { - if (axis == Z_AXIS) { - #if HOMING_Z_WITH_PROBE - #if QUIET_PROBING - probing_pause(false); - #endif - #if ENABLED(BLTOUCH) - set_bltouch_deployed(false); - #endif - #endif - } + #if HOMING_Z_WITH_PROBE && QUIET_PROBING + if (axis == Z_AXIS) probing_pause(false); + #endif endstops.validate_homing_move(); @@ -3095,8 +3128,19 @@ static void homeaxis(const AxisEnum axis) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Home 1 Fast:"); #endif + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be deployed every time + if (axis == Z_AXIS && set_bltouch_deployed(true)) return; + #endif + do_homing_move(axis, 1.5f * max_length(axis) * axis_home_dir); + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be stowed after trigger to rearm itself + if (axis == Z_AXIS) set_bltouch_deployed(false); + #endif + // When homing Z with probe respect probe clearance const float bump = axis_home_dir * ( #if HOMING_Z_WITH_PROBE @@ -3121,7 +3165,18 @@ static void homeaxis(const AxisEnum axis) { #if ENABLED(DEBUG_LEVELING_FEATURE) if (DEBUGGING(LEVELING)) SERIAL_ECHOLNPGM("Home 2 Slow:"); #endif + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be deployed every time + if (axis == Z_AXIS && set_bltouch_deployed(true)) return; + #endif + do_homing_move(axis, 2 * bump, get_homing_bump_feedrate(axis)); + + #if HOMING_Z_WITH_PROBE && ENABLED(BLTOUCH) + // BLTOUCH needs to be stowed after trigger to rearm itself + if (axis == Z_AXIS) set_bltouch_deployed(false); + #endif } /** @@ -3132,28 +3187,34 @@ static void homeaxis(const AxisEnum axis) { #if ENABLED(X_DUAL_ENDSTOPS) if (axis == X_AXIS) { const float adj = ABS(endstops.x_endstop_adj); - if (pos_dir ? (endstops.x_endstop_adj > 0) : (endstops.x_endstop_adj < 0)) stepper.set_x_lock(true); else stepper.set_x2_lock(true); - do_homing_move(axis, pos_dir ? -adj : adj); - stepper.set_x_lock(false); - stepper.set_x2_lock(false); + if (adj) { + if (pos_dir ? (endstops.x_endstop_adj > 0) : (endstops.x_endstop_adj < 0)) stepper.set_x_lock(true); else stepper.set_x2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_x_lock(false); + stepper.set_x2_lock(false); + } } #endif #if ENABLED(Y_DUAL_ENDSTOPS) if (axis == Y_AXIS) { const float adj = ABS(endstops.y_endstop_adj); - if (pos_dir ? (endstops.y_endstop_adj > 0) : (endstops.y_endstop_adj < 0)) stepper.set_y_lock(true); else stepper.set_y2_lock(true); - do_homing_move(axis, pos_dir ? -adj : adj); - stepper.set_y_lock(false); - stepper.set_y2_lock(false); + if (adj) { + if (pos_dir ? (endstops.y_endstop_adj > 0) : (endstops.y_endstop_adj < 0)) stepper.set_y_lock(true); else stepper.set_y2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_y_lock(false); + stepper.set_y2_lock(false); + } } #endif #if ENABLED(Z_DUAL_ENDSTOPS) if (axis == Z_AXIS) { const float adj = ABS(endstops.z_endstop_adj); - if (pos_dir ? (endstops.z_endstop_adj > 0) : (endstops.z_endstop_adj < 0)) stepper.set_z_lock(true); else stepper.set_z2_lock(true); - do_homing_move(axis, pos_dir ? -adj : adj); - stepper.set_z_lock(false); - stepper.set_z2_lock(false); + if (adj) { + if (pos_dir ? (endstops.z_endstop_adj > 0) : (endstops.z_endstop_adj < 0)) stepper.set_z_lock(true); else stepper.set_z2_lock(true); + do_homing_move(axis, pos_dir ? -adj : adj); + stepper.set_z_lock(false); + stepper.set_z2_lock(false); + } } #endif stepper.set_homing_dual_axis(false); @@ -3216,11 +3277,12 @@ static void homeaxis(const AxisEnum axis) { void normalize_mix() { float mix_total = 0.0; - for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mix_total += RECIPROCAL(mixing_factor[i]); + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mix_total += mixing_factor[i]; // Scale all values if they don't add up to ~1.0 if (!NEAR(mix_total, 1.0)) { SERIAL_PROTOCOLLNPGM("Warning: Mix factors must add up to 1.0. Scaling."); - for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_factor[i] *= mix_total; + const float inverse_sum = RECIPROCAL(mix_total); + for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_factor[i] *= inverse_sum; } } @@ -3229,14 +3291,25 @@ static void homeaxis(const AxisEnum axis) { // The total "must" be 1.0 (but it will be normalized) // If no mix factors are given, the old mix is preserved void gcode_get_mix() { - const char* mixing_codes = "ABCDHI"; + const char mixing_codes[] = { 'A', 'B' + #if MIXING_STEPPERS > 2 + , 'C' + #if MIXING_STEPPERS > 3 + , 'D' + #if MIXING_STEPPERS > 4 + , 'H' + #if MIXING_STEPPERS > 5 + , 'I' + #endif // MIXING_STEPPERS > 5 + #endif // MIXING_STEPPERS > 4 + #endif // MIXING_STEPPERS > 3 + #endif // MIXING_STEPPERS > 2 + }; byte mix_bits = 0; for (uint8_t i = 0; i < MIXING_STEPPERS; i++) { if (parser.seenval(mixing_codes[i])) { SBI(mix_bits, i); - float v = parser.value_float(); - NOLESS(v, 0.0); - mixing_factor[i] = RECIPROCAL(v); + mixing_factor[i] = MAX(parser.value_float(), 0.0); } } // If any mixing factors were included, clear the rest @@ -3270,7 +3343,7 @@ void gcode_get_destination() { const float v = parser.value_axis_units((AxisEnum)i); destination[i] = (axis_relative_modes[i] || relative_mode) ? current_position[i] + v - : (i == E_AXIS) ? v : LOGICAL_TO_NATIVE(v, i); + : (i == E_CART) ? v : LOGICAL_TO_NATIVE(v, i); } else destination[i] = current_position[i]; @@ -3281,7 +3354,7 @@ void gcode_get_destination() { #if ENABLED(PRINTCOUNTER) if (!DEBUGGING(DRYRUN)) - print_job_timer.incFilamentUsed(destination[E_AXIS] - current_position[E_AXIS]); + print_job_timer.incFilamentUsed(destination[E_CART] - current_position[E_CART]); #endif // Get ABCDHI mixing factors @@ -3349,10 +3422,10 @@ inline void gcode_G0_G1( if (MIN_AUTORETRACT <= MAX_AUTORETRACT) { // When M209 Autoretract is enabled, convert E-only moves to firmware retract/prime moves if (fwretract.autoretract_enabled && parser.seen('E') && !(parser.seen('X') || parser.seen('Y') || parser.seen('Z'))) { - const float echange = destination[E_AXIS] - current_position[E_AXIS]; + const float echange = destination[E_CART] - current_position[E_CART]; // Is this a retract or prime move? if (WITHIN(ABS(echange), MIN_AUTORETRACT, MAX_AUTORETRACT) && fwretract.retracted[active_extruder] == (echange > 0.0)) { - current_position[E_AXIS] = destination[E_AXIS]; // Hide a G1-based retract/prime from calculations + current_position[E_CART] = destination[E_CART]; // Hide a G1-based retract/prime from calculations sync_plan_position_e(); // AND from the planner return fwretract.retract(echange < 0.0); // Firmware-based retract/prime (double-retract ignored) } @@ -3540,6 +3613,74 @@ inline void gcode_G4() { #endif // BEZIER_CURVE_SUPPORT +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + + /** + * G6 implementation for Hangprinter based on + * http://reprap.org/wiki/GCodes#G6:_Direct_Stepper_Move + * Accessed Jan 8, 2018 + * + * G6 is used frequently to tighten lines with Hangprinter, so Hangprinter default is relative moves. + * Hangprinter uses switches + * S1 for absolute moves + * S2 for saving recording new line length after unregistered move + * (typically used while tuning LINE_BUILDUP_COMPENSATION_FEATURE parameters) + */ + + /** + * G6: Direct Stepper Move + */ + inline void gcode_G6() { + bool count_it = false; + #if ENABLED(NO_MOTION_BEFORE_HOMING) + if (axis_unhomed_error()) return; + #endif + if (IsRunning()) { + float go[MOV_AXIS] = { 0.0 }, + tmp_fr_mm_s = 0.0; + + LOOP_MOV_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) + go[i] = parser.value_axis_units((AxisEnum)i); + + #if ENABLED(HANGPRINTER) + #define GO_SRC line_lengths + #elif ENABLED(DELTA) + #define GO_SRC delta + #else + #define GO_SRC current_position + #endif + + if ( + #if ENABLED(HANGPRINTER) // Sending R to another machine is the same as not sending S1 to Hangprinter + parser.byteval('S') != 2 + #else + parser.seen('R') + #endif + ) + LOOP_MOV_AXIS(i) go[i] += GO_SRC[i]; + else + LOOP_MOV_AXIS(i) if (!parser.seen(RAW_AXIS_CODES(i))) go[i] += GO_SRC[i]; + + tmp_fr_mm_s = parser.linearval('F') > 0.0 ? MMM_TO_MMS(parser.value_feedrate()) : feedrate_mm_s; + + #if ENABLED(HANGPRINTER) + if (parser.byteval('S') == 2) { + LOOP_MOV_AXIS(i) line_lengths[i] = go[i]; + count_it = true; + } + #endif + + planner.buffer_segment(go[A_AXIS], go[B_AXIS], go[C_AXIS] + #if ENABLED(HANGPRINTER) + , go[D_AXIS] + #endif + , current_position[E_CART], tmp_fr_mm_s, active_extruder, 0.0, count_it + ); + } + } +#endif + #if ENABLED(FWRETRACT) /** @@ -3952,7 +4093,15 @@ inline void gcode_G4() { #endif } -#endif // DELTA +#elif ENABLED(HANGPRINTER) + /** + * A hangprinter cannot home itself + */ + inline void home_hangprinter() { + SERIAL_ECHOLNPGM("Warning: G28 is not implemented for Hangprinter."); + } + +#endif #ifdef Z_AFTER_PROBING void move_z_after_probing() { @@ -4102,6 +4251,7 @@ inline void gcode_G28(const bool always_home_all) { #endif #if ENABLED(BLTOUCH) + // Make sure any BLTouch error condition is cleared bltouch_command(BLTOUCH_RESET); set_bltouch_deployed(false); #endif @@ -4129,7 +4279,12 @@ inline void gcode_G28(const bool always_home_all) { home_delta(); UNUSED(always_home_all); - #else // NOT DELTA + #elif ENABLED(HANGPRINTER) + + home_hangprinter(); + UNUSED(always_home_all); + + #else // NOT Delta or Hangprinter const bool homeX = always_home_all || parser.seen('X'), homeY = always_home_all || parser.seen('Y'), @@ -4287,7 +4442,14 @@ void home_all_axes() { gcode_G28(true); } inline void _manual_goto_xy(const float &rx, const float &ry) { - #if MANUAL_PROBE_HEIGHT > 0 + #ifdef MANUAL_PROBE_START_Z + #if MANUAL_PROBE_HEIGHT > 0 + do_blocking_move_to(rx, ry, MANUAL_PROBE_HEIGHT); + do_blocking_move_to_z(MAX(0,MANUAL_PROBE_START_Z)); + #else + do_blocking_move_to(rx, ry, MAX(0,MANUAL_PROBE_START_Z)); + #endif + #elif MANUAL_PROBE_HEIGHT > 0 const float prev_z = current_position[Z_AXIS]; do_blocking_move_to(rx, ry, MANUAL_PROBE_HEIGHT); do_blocking_move_to_z(prev_z); @@ -4429,7 +4591,8 @@ void home_all_axes() { gcode_G28(true); } if (parser.seenval('X')) { px = parser.value_int() - 1; if (!WITHIN(px, 0, GRID_MAX_POINTS_X - 1)) { - SERIAL_PROTOCOLLNPGM("X out of range (1-" STRINGIFY(GRID_MAX_POINTS_X) ")."); + SERIAL_PROTOCOLPAIR("X out of range (0-", int(GRID_MAX_POINTS_X)); + SERIAL_PROTOCOLLNPGM(")"); return; } } @@ -4441,7 +4604,8 @@ void home_all_axes() { gcode_G28(true); } if (parser.seenval('Y')) { py = parser.value_int() - 1; if (!WITHIN(py, 0, GRID_MAX_POINTS_Y - 1)) { - SERIAL_PROTOCOLLNPGM("Y out of range (1-" STRINGIFY(GRID_MAX_POINTS_Y) ")."); + SERIAL_PROTOCOLPAIR("Y out of range (0-", int(GRID_MAX_POINTS_Y)); + SERIAL_PROTOCOLLNPGM(")"); return; } } @@ -4810,10 +4974,10 @@ void home_all_axes() { gcode_G28(true); } xy_probe_feedrate_mm_s = MMM_TO_MMS(parser.linearval('S', XY_PROBE_SPEED)); - left_probe_bed_position = parser.seenval('L') ? (int)RAW_X_POSITION(parser.value_linear_units()) : LEFT_PROBE_BED_POSITION; - right_probe_bed_position = parser.seenval('R') ? (int)RAW_X_POSITION(parser.value_linear_units()) : RIGHT_PROBE_BED_POSITION; - front_probe_bed_position = parser.seenval('F') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : FRONT_PROBE_BED_POSITION; - back_probe_bed_position = parser.seenval('B') ? (int)RAW_Y_POSITION(parser.value_linear_units()) : BACK_PROBE_BED_POSITION; + left_probe_bed_position = parser.seenval('L') ? int(RAW_X_POSITION(parser.value_linear_units())) : LEFT_PROBE_BED_POSITION; + right_probe_bed_position = parser.seenval('R') ? int(RAW_X_POSITION(parser.value_linear_units())) : RIGHT_PROBE_BED_POSITION; + front_probe_bed_position = parser.seenval('F') ? int(RAW_Y_POSITION(parser.value_linear_units())) : FRONT_PROBE_BED_POSITION; + back_probe_bed_position = parser.seenval('B') ? int(RAW_Y_POSITION(parser.value_linear_units())) : BACK_PROBE_BED_POSITION; if ( #if IS_SCARA || ENABLED(DELTA) @@ -5650,7 +5814,7 @@ void home_all_axes() { gcode_G28(true); } #endif } - #if HAS_BED_PROBE + #if HAS_BED_PROBE && ENABLED(ULTIPANEL) static float probe_z_shift(const float center) { STOW_PROBE(); endstops.enable_z_probe(false); @@ -6034,7 +6198,7 @@ void home_all_axes() { gcode_G28(true); } switch (probe_points) { case -1: - #if HAS_BED_PROBE + #if HAS_BED_PROBE && ENABLED(ULTIPANEL) zprobe_zoffset += probe_z_shift(z_at_pt[CEN]); #endif @@ -6126,9 +6290,9 @@ void home_all_axes() { gcode_G28(true); } char mess[21]; strcpy_P(mess, PSTR("Calibration sd:")); if (zero_std_dev_min < 1) - sprintf_P(&mess[15], PSTR("0.%03i"), (int)LROUND(zero_std_dev_min * 1000.0)); + sprintf_P(&mess[15], PSTR("0.%03i"), int(LROUND(zero_std_dev_min * 1000.0))); else - sprintf_P(&mess[15], PSTR("%03i.x"), (int)LROUND(zero_std_dev_min)); + sprintf_P(&mess[15], PSTR("%03i.x"), int(LROUND(zero_std_dev_min))); lcd_setstatus(mess); print_calibration_settings(_endstop_results, _angle_results); serialprintPGM(save_message); @@ -6137,7 +6301,7 @@ void home_all_axes() { gcode_G28(true); } else { // !end iterations char mess[15]; if (iterations < 31) - sprintf_P(mess, PSTR("Iteration : %02i"), (int)iterations); + sprintf_P(mess, PSTR("Iteration : %02i"), int(iterations)); else strcpy_P(mess, PSTR("No convergence")); SERIAL_PROTOCOL(mess); @@ -6162,9 +6326,9 @@ void home_all_axes() { gcode_G28(true); } strcpy_P(mess, enddryrun); strcpy_P(&mess[11], PSTR(" sd:")); if (zero_std_dev < 1) - sprintf_P(&mess[15], PSTR("0.%03i"), (int)LROUND(zero_std_dev * 1000.0)); + sprintf_P(&mess[15], PSTR("0.%03i"), int(LROUND(zero_std_dev * 1000.0))); else - sprintf_P(&mess[15], PSTR("%03i.x"), (int)LROUND(zero_std_dev)); + sprintf_P(&mess[15], PSTR("%03i.x"), int(LROUND(zero_std_dev))); lcd_setstatus(mess); } ac_home(); @@ -6338,7 +6502,7 @@ inline void gcode_G92() { #endif bool didE = false; - #if IS_SCARA || !HAS_POSITION_SHIFT + #if IS_SCARA || !HAS_POSITION_SHIFT || ENABLED(HANGPRINTER) bool didXYZ = false; #else constexpr bool didXYZ = false; @@ -6347,16 +6511,20 @@ inline void gcode_G92() { if (IS_G92_0) LOOP_XYZE(i) { if (parser.seenval(axis_codes[i])) { const float l = parser.value_axis_units((AxisEnum)i), - v = i == E_AXIS ? l : LOGICAL_TO_NATIVE(l, i), + v = i == E_CART ? l : LOGICAL_TO_NATIVE(l, i), d = v - current_position[i]; - if (!NEAR_ZERO(d)) { - #if IS_SCARA || !HAS_POSITION_SHIFT - if (i == E_AXIS) didE = true; else didXYZ = true; + if (!NEAR_ZERO(d) + #if ENABLED(HANGPRINTER) + || true // Hangprinter needs to update its line lengths whether current_position changed or not + #endif + ) { + #if IS_SCARA || !HAS_POSITION_SHIFT || ENABLED(HANGPRINTER) + if (i == E_CART) didE = true; else didXYZ = true; current_position[i] = v; // Without workspaces revert to Marlin 1.0 behavior #elif HAS_POSITION_SHIFT - if (i == E_AXIS) { + if (i == E_CART) { didE = true; - current_position[E_AXIS] = v; // When using coordinate spaces, only E is set directly + current_position[E_CART] = v; // When using coordinate spaces, only E is set directly } else { position_shift[i] += d; // Other axes simply offset the coordinate space @@ -6380,6 +6548,184 @@ inline void gcode_G92() { report_current_position(); } +#if ENABLED(MECHADUINO_I2C_COMMANDS) + /** + * G95: Set torque mode + */ + inline void gcode_G95() { + i2cFloat torques[NUM_AXIS]; // Assumes 4-byte floats here and in Mechaduino firmware + LOOP_NUM_AXIS(i) + torques[i].fval = parser.floatval(RAW_AXIS_CODES(i), 999.9); // 999.9 chosen to satisfy fabs(999.9) > 255.0 + + // 0x5f == 95 + #define G95_SEND(LETTER) do { \ + if (fabs(torques[_AXIS(LETTER)].fval) < 255.0){ \ + torques[_AXIS(LETTER)].fval = -fabs(torques[_AXIS(LETTER)].fval); \ + if(!INVERT_##LETTER##_DIR) torques[_AXIS(LETTER)].fval = -torques[_AXIS(LETTER)].fval; \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.reset(); \ + i2c.addbyte(0x5f); \ + i2c.addbytes(torques[_AXIS(LETTER)].bval, sizeof(float)); \ + i2c.send(); \ + }} while(0) + + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + G95_SEND(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + G95_SEND(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + G95_SEND(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + G95_SEND(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + G95_SEND(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + G95_SEND(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + G95_SEND(Z); + #endif + #endif + #if ENABLED(E_IS_MECHADUINO) + G95_SEND(E); + #endif + } + + /** + * G96: Mark encoder reference point + */ + inline void gcode_G96() { + bool mark[NUM_AXIS] = { false }; + if (!parser.seen_any()) + LOOP_NUM_AXIS(i) + mark[i] = true; + else + LOOP_NUM_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) + mark[i] = true; + + // 0x60 == 96 + #define G96_SEND(LETTER) do {\ + if (mark[LETTER##_AXIS]){ \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.reset(); \ + i2c.addbyte(0x60); \ + i2c.send(); \ + }} while(0) + + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + G96_SEND(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + G96_SEND(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + G96_SEND(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + G96_SEND(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + G96_SEND(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + G96_SEND(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + G96_SEND(Z); + #endif + #endif + #if ENABLED(E_IS_MECHADUINO) + G96_SEND(E); // E ref point not used by any other commands (Feb 7, 2018) + #endif + } + + float ang_to_mm(float ang, const AxisEnum axis) { + const float abs_step_in_origin = + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + planner.k0[axis] * (SQRT(planner.k1[axis] + planner.k2[axis] * line_lengths_origin[axis]) - planner.sqrtk1[axis]) + #else + line_lengths_origin[axis] * planner.axis_steps_per_mm[axis] + #endif + ; + const float c = abs_step_in_origin + ang * float(STEPS_PER_MOTOR_REVOLUTION) / 360.0; // current step count + return + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + // Inverse function found in planner.cpp, where target[AXIS_A] is calculated + ((c / planner.k0[axis] + planner.sqrtk1[axis]) * (c / planner.k0[axis] + planner.sqrtk1[axis]) - planner.k1[axis]) / planner.k2[axis] - line_lengths_origin[axis] + #else + c / planner.axis_steps_per_mm[axis] - line_lengths_origin[axis] + #endif + ; + } + + void report_axis_position_from_encoder_data() { + i2cFloat ang; + + #define M114_S1_RECEIVE(LETTER) do { \ + i2c.address(LETTER##_MOTOR_I2C_ADDR); \ + i2c.request(sizeof(float)); \ + i2c.capture(ang.bval, sizeof(float)); \ + if(LETTER##_INVERT_REPORTED_ANGLE == INVERT_##LETTER##_DIR) ang.fval = -ang.fval; \ + SERIAL_PROTOCOL(ang_to_mm(ang.fval, LETTER##_AXIS)); \ + } while(0) + + SERIAL_CHAR('['); + #if ENABLED(HANGPRINTER) + #if ENABLED(A_IS_MECHADUINO) + M114_S1_RECEIVE(A); + #endif + #if ENABLED(B_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(B); + #endif + #if ENABLED(C_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(C); + #endif + #if ENABLED(D_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(D); + #endif + #else + #if ENABLED(X_IS_MECHADUINO) + M114_S1_RECEIVE(X); + #endif + #if ENABLED(Y_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(Y); + #endif + #if ENABLED(Z_IS_MECHADUINO) + SERIAL_PROTOCOLPGM(", "); + M114_S1_RECEIVE(Z); + #endif + #endif + SERIAL_CHAR(']'); + SERIAL_EOL(); + } + +#endif // MECHADUINO_I2C_COMMANDS + + +void report_xyz_from_stepper_position() { + get_cartesian_from_steppers(); // writes to cartes[XYZ] + SERIAL_CHAR('['); + SERIAL_PROTOCOL(cartes[X_AXIS]); + SERIAL_PROTOCOLPAIR(", ", cartes[Y_AXIS]); + SERIAL_PROTOCOLPAIR(", ", cartes[Z_AXIS]); + SERIAL_CHAR(']'); + SERIAL_EOL(); +} + #if HAS_RESUME_CONTINUE /** @@ -6575,7 +6921,7 @@ inline void gcode_M17() { void do_pause_e_move(const float &length, const float &fr) { set_destination_from_current(); - destination[E_AXIS] += length / planner.e_factor[active_extruder]; + destination[E_CART] += length / planner.e_factor[active_extruder]; planner.buffer_line_kinematic(destination, fr, active_extruder); set_current_from_destination(); planner.synchronize(); @@ -6876,11 +7222,9 @@ inline void gcode_M17() { if (retract && thermalManager.hotEnoughToExtrude(active_extruder)) do_pause_e_move(retract, PAUSE_PARK_RETRACT_FEEDRATE); - #if ENABLED(NO_MOTION_BEFORE_HOMING) - if (!axis_unhomed_error()) - #endif - // Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos) - Nozzle::park(2, park_point); + // Park the nozzle by moving up by z_lift and then moving to (x_pos, y_pos) + if (!axis_unhomed_error()) + Nozzle::park(2, park_point); // Unload the filament if (unload_length) @@ -7028,7 +7372,7 @@ inline void gcode_M17() { #endif // If resume_position is negative - if (resume_position[E_AXIS] < 0) do_pause_e_move(resume_position[E_AXIS], PAUSE_PARK_RETRACT_FEEDRATE); + if (resume_position[E_CART] < 0) do_pause_e_move(resume_position[E_CART], PAUSE_PARK_RETRACT_FEEDRATE); // Move XY to starting position, then Z do_blocking_move_to_xy(resume_position[X_AXIS], resume_position[Y_AXIS], NOZZLE_PARK_XY_FEEDRATE); @@ -7038,7 +7382,7 @@ inline void gcode_M17() { // Now all extrusion positions are resumed and ready to be confirmed // Set extruder to saved position - planner.set_e_position_mm((destination[E_AXIS] = current_position[E_AXIS] = resume_position[E_AXIS])); + planner.set_e_position_mm((destination[E_CART] = current_position[E_CART] = resume_position[E_CART])); #if ENABLED(FILAMENT_RUNOUT_SENSOR) runout.reset(); @@ -7290,6 +7634,7 @@ inline void protected_pin_err() { * * P Pin number (LED if omitted) * S Pin status from 0 - 255 + * I Flag to ignore Marlin's pin protection */ inline void gcode_M42() { if (!parser.seenval('S')) return; @@ -7298,7 +7643,7 @@ inline void gcode_M42() { const pin_t pin_number = parser.byteval('P', LED_PIN); if (pin_number < 0) return; - if (pin_is_protected(pin_number)) return protected_pin_err(); + if (!parser.boolval('I') && pin_is_protected(pin_number)) return protected_pin_err(); pinMode(pin_number, OUTPUT); digitalWrite(pin_number, pin_status); @@ -7532,9 +7877,9 @@ inline void gcode_M42() { // Enable or disable endstop monitoring if (parser.seen('E')) { - endstop_monitor_flag = parser.value_bool(); + endstops.monitor_flag = parser.value_bool(); SERIAL_PROTOCOLPGM("endstop monitor "); - serialprintPGM(endstop_monitor_flag ? PSTR("en") : PSTR("dis")); + serialprintPGM(endstops.monitor_flag ? PSTR("en") : PSTR("dis")); SERIAL_PROTOCOLLNPGM("abled"); return; } @@ -7793,7 +8138,7 @@ inline void gcode_M42() { if (verbose_level > 1) { SERIAL_PROTOCOL(n + 1); SERIAL_PROTOCOLPGM(" of "); - SERIAL_PROTOCOL((int)n_samples); + SERIAL_PROTOCOL(int(n_samples)); SERIAL_PROTOCOLPGM(": z: "); SERIAL_PROTOCOL_F(sample_set[n], 3); if (verbose_level > 2) { @@ -7875,7 +8220,7 @@ inline void gcode_M42() { * This has no effect during an SD print job */ inline void gcode_M73() { - if (!IS_SD_PRINTING && parser.seen('P')) { + if (!IS_SD_PRINTING() && parser.seen('P')) { progress_bar_percent = parser.value_byte(); NOMORE(progress_bar_percent, 100); } @@ -8074,8 +8419,9 @@ inline void gcode_M109() { if (target_extruder != active_extruder) return; #endif - const bool no_wait_for_cooling = parser.seenval('S'); - if (no_wait_for_cooling || parser.seenval('R')) { + const bool no_wait_for_cooling = parser.seenval('S'), + set_temp = no_wait_for_cooling || parser.seenval('R'); + if (set_temp) { const int16_t temp = parser.value_celsius(); thermalManager.setTargetHotend(temp, target_extruder); @@ -8108,12 +8454,13 @@ inline void gcode_M109() { #endif #endif } - else return; #if ENABLED(AUTOTEMP) planner.autotemp_M104_M109(); #endif + if (!set_temp) return; + #if TEMP_RESIDENCY_TIME > 0 millis_t residency_start_ms = 0; // Loop until the temperature has stabilized @@ -8592,12 +8939,12 @@ inline void gcode_M81() { /** * M82: Set E codes absolute (default) */ -inline void gcode_M82() { axis_relative_modes[E_AXIS] = false; } +inline void gcode_M82() { axis_relative_modes[E_CART] = false; } /** * M83: Set E codes relative while in Absolute Coordinates (G90) mode */ -inline void gcode_M83() { axis_relative_modes[E_AXIS] = true; } +inline void gcode_M83() { axis_relative_modes[E_CART] = true; } /** * M18, M84: Disable stepper motors @@ -8647,20 +8994,20 @@ inline void gcode_M85() { /** * M92: Set axis steps-per-unit for one or more axes, X, Y, Z, and E. + * (for Hangprinter: A, B, C, D, and E) * (Follows the same syntax as G92) * * With multiple extruders use T to specify which one. */ inline void gcode_M92() { - GET_TARGET_EXTRUDER(92); - LOOP_XYZE(i) { - if (parser.seen(axis_codes[i])) { + LOOP_NUM_AXIS(i) { + if (parser.seen(RAW_AXIS_CODES(i))) { if (i == E_AXIS) { const float value = parser.value_per_axis_unit((AxisEnum)(E_AXIS + TARGET_EXTRUDER)); if (value < 20) { - float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. + const float factor = planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] / value; // increase e constants if M92 E14 is given for netfab. #if DISABLED(JUNCTION_DEVIATION) planner.max_jerk[E_AXIS] *= factor; #endif @@ -8670,6 +9017,11 @@ inline void gcode_M92() { planner.axis_steps_per_mm[E_AXIS + TARGET_EXTRUDER] = value; } else { + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + SERIAL_ECHOLNPGM("Warning: " + "M92 A, B, C, and D only affect acceleration planning " + "when BUILDUP_COMPENSATION_FEATURE is enabled."); + #endif planner.axis_steps_per_mm[i] = parser.value_per_axis_unit((AxisEnum)i); } } @@ -8681,14 +9033,18 @@ inline void gcode_M92() { * Output the current position to serial */ void report_current_position() { - SERIAL_PROTOCOLPGM("X:"); - SERIAL_PROTOCOL(LOGICAL_X_POSITION(current_position[X_AXIS])); - SERIAL_PROTOCOLPGM(" Y:"); - SERIAL_PROTOCOL(LOGICAL_Y_POSITION(current_position[Y_AXIS])); - SERIAL_PROTOCOLPGM(" Z:"); - SERIAL_PROTOCOL(LOGICAL_Z_POSITION(current_position[Z_AXIS])); - SERIAL_PROTOCOLPGM(" E:"); - SERIAL_PROTOCOL(current_position[E_AXIS]); + SERIAL_PROTOCOLPAIR("X:", LOGICAL_X_POSITION(current_position[X_AXIS])); + SERIAL_PROTOCOLPAIR(" Y:", LOGICAL_Y_POSITION(current_position[Y_AXIS])); + SERIAL_PROTOCOLPAIR(" Z:", LOGICAL_Z_POSITION(current_position[Z_AXIS])); + SERIAL_PROTOCOLPAIR(" E:", current_position[E_CART]); + + #if ENABLED(HANGPRINTER) + SERIAL_EOL(); + SERIAL_PROTOCOLPAIR("A:", line_lengths[A_AXIS]); + SERIAL_PROTOCOLPAIR(" B:", line_lengths[B_AXIS]); + SERIAL_PROTOCOLPAIR(" C:", line_lengths[C_AXIS]); + SERIAL_PROTOCOLLNPAIR(" D:", line_lengths[D_AXIS]); + #endif stepper.report_positions(); @@ -8753,9 +9109,9 @@ void report_current_position() { planner.synchronize(); SERIAL_PROTOCOLPGM("Stepper:"); - LOOP_XYZE(i) { + LOOP_NUM_AXIS(i) { SERIAL_CHAR(' '); - SERIAL_CHAR(axis_codes[i]); + SERIAL_CHAR(RAW_AXIS_CODES(i)); SERIAL_CHAR(':'); SERIAL_PROTOCOL(stepper.position((AxisEnum)i)); } @@ -8779,7 +9135,7 @@ void report_current_position() { from_steppers[X_AXIS] - leveled[X_AXIS], from_steppers[Y_AXIS] - leveled[Y_AXIS], from_steppers[Z_AXIS] - leveled[Z_AXIS], - from_steppers[E_AXIS] - current_position[E_AXIS] + from_steppers[E_CART] - current_position[E_CART] }; SERIAL_PROTOCOLPGM("Differ: "); report_xyze(diff); @@ -8792,13 +9148,19 @@ void report_current_position() { inline void gcode_M114() { #ifdef M114_DETAIL - if (parser.seen('D')) { - report_current_position_detail(); - return; - } + if (parser.seen('D')) return report_current_position_detail(); #endif planner.synchronize(); + + const uint16_t sval = parser.ushortval('S'); + + #if ENABLED(MECHADUINO_I2C_COMMANDS) + if (sval == 1) return report_axis_position_from_encoder_data(); + #endif + + if (sval == 2) return report_xyz_from_stepper_position(); + report_current_position(); } @@ -9094,8 +9456,8 @@ inline void gcode_M201() { GET_TARGET_EXTRUDER(201); - LOOP_XYZE(i) { - if (parser.seen(axis_codes[i])) { + LOOP_NUM_AXIS(i) { + if (parser.seen(RAW_AXIS_CODES(i))) { const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); planner.max_acceleration_mm_per_s2[a] = parser.value_axis_units((AxisEnum)a); } @@ -9122,8 +9484,8 @@ inline void gcode_M203() { GET_TARGET_EXTRUDER(203); - LOOP_XYZE(i) - if (parser.seen(axis_codes[i])) { + LOOP_NUM_AXIS(i) + if (parser.seen(RAW_AXIS_CODES(i))) { const uint8_t a = i + (i == E_AXIS ? TARGET_EXTRUDER : 0); planner.max_feedrate_mm_s[a] = parser.value_axis_units((AxisEnum)a); } @@ -9164,7 +9526,7 @@ inline void gcode_M204() { /** * M205: Set Advanced Settings * - * B = Min Segment Time (µs) + * Q = Min Segment Time (µs) * S = Min Feed Rate (units/s) * T = Min Travel Feed Rate (units/s) * X = Max X Jerk (units/sec^2) @@ -9174,7 +9536,7 @@ inline void gcode_M204() { * J = Junction Deviation (mm) (Requires JUNCTION_DEVIATION) */ inline void gcode_M205() { - if (parser.seen('B')) planner.min_segment_time_us = parser.value_ulong(); + if (parser.seen('Q')) planner.min_segment_time_us = parser.value_ulong(); if (parser.seen('S')) planner.min_feedrate_mm_s = parser.value_linear_units(); if (parser.seen('T')) planner.min_travel_feedrate_mm_s = parser.value_linear_units(); #if ENABLED(JUNCTION_DEVIATION) @@ -9190,15 +9552,22 @@ inline void gcode_M205() { } } #else - if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units(); - if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units(); - if (parser.seen('Z')) { - planner.max_jerk[Z_AXIS] = parser.value_linear_units(); - #if HAS_MESH - if (planner.max_jerk[Z_AXIS] <= 0.1f) - SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses."); - #endif - } + #if ENABLED(HANGPRINTER) + if (parser.seen('A')) planner.max_jerk[A_AXIS] = parser.value_linear_units(); + if (parser.seen('B')) planner.max_jerk[B_AXIS] = parser.value_linear_units(); + if (parser.seen('C')) planner.max_jerk[C_AXIS] = parser.value_linear_units(); + if (parser.seen('D')) planner.max_jerk[D_AXIS] = parser.value_linear_units(); + #else + if (parser.seen('X')) planner.max_jerk[X_AXIS] = parser.value_linear_units(); + if (parser.seen('Y')) planner.max_jerk[Y_AXIS] = parser.value_linear_units(); + if (parser.seen('Z')) { + planner.max_jerk[Z_AXIS] = parser.value_linear_units(); + #if HAS_MESH + if (planner.max_jerk[Z_AXIS] <= 0.1f) + SERIAL_ECHOLNPGM("WARNING! Low Z Jerk may lead to unwanted pauses."); + #endif + } + #endif if (parser.seen('E')) planner.max_jerk[E_AXIS] = parser.value_linear_units(); #endif } @@ -9317,6 +9686,42 @@ inline void gcode_M205() { } } +#elif ENABLED(HANGPRINTER) + /** + * M665: Set HANGPRINTER settings + * + * Parameters: + * + * W[anchor_A_y] - A-anchor's y coordinate (see note) + * E[anchor_A_z] - A-anchor's z coordinate (see note) + * R[anchor_B_x] - B-anchor's x coordinate (see note) + * T[anchor_B_y] - B-anchor's y coordinate (see note) + * Y[anchor_B_z] - B-anchor's z coordinate (see note) + * U[anchor_C_x] - C-anchor's x coordinate (see note) + * I[anchor_C_y] - C-anchor's y coordinate (see note) + * O[anchor_C_z] - C-anchor's z coordinate (see note) + * P[anchor_D_z] - D-anchor's z coordinate (see note) + * S[segments-per-second] - Segments-per-second + * + * Note: All xyz coordinates are measured relative to the line's pivot point in the mover, + * when it is at its home position (nozzle in (0,0,0), and lines tight). + * The y-axis is defined to be horizontal right above/below the A-lines when mover is at home. + * The z-axis is along the vertical direction. + */ + inline void gcode_M665() { + if (parser.seen('W')) anchor_A_y = parser.value_float(); + if (parser.seen('E')) anchor_A_z = parser.value_float(); + if (parser.seen('R')) anchor_B_x = parser.value_float(); + if (parser.seen('T')) anchor_B_y = parser.value_float(); + if (parser.seen('Y')) anchor_B_z = parser.value_float(); + if (parser.seen('U')) anchor_C_x = parser.value_float(); + if (parser.seen('I')) anchor_C_y = parser.value_float(); + if (parser.seen('O')) anchor_C_z = parser.value_float(); + if (parser.seen('P')) anchor_D_z = parser.value_float(); + if (parser.seen('S')) delta_segments_per_second = parser.value_float(); + recalc_hangprinter_settings(); + } + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) /** @@ -10436,6 +10841,17 @@ inline void gcode_M502() { } #endif +#if ENABLED(SDSUPPORT) + + /** + * M524: Abort the current SD print job (started with M24) + */ + inline void gcode_M524() { + if (IS_SD_PRINTING()) card.abort_sd_printing = true; + } + +#endif // SDSUPPORT + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) /** @@ -10734,7 +11150,7 @@ inline void gcode_M502() { inline void gcode_M605() { planner.synchronize(); - extruder_duplication_enabled = parser.intval('S') == (int)DXC_DUPLICATION_MODE; + extruder_duplication_enabled = parser.intval('S') == int(DXC_DUPLICATION_MODE); SERIAL_ECHO_START(); SERIAL_ECHOLNPAIR(MSG_DUPLICATION_MODE, extruder_duplication_enabled ? MSG_ON : MSG_OFF); } @@ -10880,31 +11296,60 @@ inline void gcode_M502() { #if ENABLED(MAX7219_GCODE) /** * M7219: Control the Max7219 LED matrix - * + * * I - Initialize (clear) the matrix + * F - Fill the matrix (set all bits) + * P - Dump the LEDs[] array values * C - Set a column to the 8-bit value V * R - Set a row to the 8-bit value V * X - X position of an LED to set or toggle * Y - Y position of an LED to set or toggle - * V - The 8-bit value or on/off state to set + * V - The potentially 32-bit value or on/off state to set + * (for example: a chain of 4 Max7219 devices can have 32 bit + * rows or columns depending upon rotation) */ inline void gcode_M7219() { - if (parser.seen('I')) - Max7219_Clear(); - else if (parser.seenval('R')) { - const uint8_t r = parser.value_int(); - Max7219_Set_Row(r, parser.byteval('V')); + if (parser.seen('I')) { + max7219.register_setup(); + max7219.clear(); + } + + if (parser.seen('F')) max7219.fill(); + + const uint32_t v = parser.ulongval('V'); + + if (parser.seenval('R')) { + const uint8_t r = parser.value_byte(); + max7219.set_row(r, v); } else if (parser.seenval('C')) { - const uint8_t c = parser.value_int(); - Max7219_Set_Column(c, parser.byteval('V')); + const uint8_t c = parser.value_byte(); + max7219.set_column(c, v); } else if (parser.seenval('X') || parser.seenval('Y')) { const uint8_t x = parser.byteval('X'), y = parser.byteval('Y'); if (parser.seenval('V')) - Max7219_LED_Set(x, y, parser.boolval('V')); + max7219.led_set(x, y, parser.boolval('V')); else - Max7219_LED_Toggle(x, y); + max7219.led_toggle(x, y); + } + else if (parser.seen('D')) { + const uint8_t line = parser.byteval('D') + (parser.byteval('U') << 3); + if (line < MAX7219_LINES) { + max7219.led_line[line] = v; + return max7219.refresh_line(line); + } + } + + if (parser.seen('P')) { + for (uint8_t r = 0; r < MAX7219_LINES; r++) { + SERIAL_ECHOPGM("led_line["); + if (r < 10) SERIAL_CHAR(' '); + SERIAL_ECHO(int(r)); + SERIAL_ECHOPGM("]="); + for (uint8_t b = 8; b--;) SERIAL_CHAR('0' + TEST(max7219.led_line[r], b)); + SERIAL_EOL(); + } } } #endif // MAX7219_GCODE @@ -10944,6 +11389,7 @@ inline void gcode_M502() { /** * M906: Set motor current in milliamps using axis codes X, Y, Z, E + * Uses axis codes A, B, C, D, E for Hangprinter * Report driver currents when no axis specified */ inline void gcode_M906() { @@ -10952,132 +11398,170 @@ inline void gcode_M502() { bool report = true; const uint8_t index = parser.byteval('I'); - LOOP_XYZE(i) if (uint16_t value = parser.intval(axis_codes[i])) { + LOOP_NUM_AXIS(i) if (uint16_t value = parser.intval(RAW_AXIS_CODES(i))) { + report = false; switch (i) { + // Assumes {A_AXIS, B_AXIS, C_AXIS} == {X_AXIS, Y_AXIS, Z_AXIS} case X_AXIS: - #if X_IS_TRINAMIC - if (index == 0) TMC_SET_CURRENT(X); + #if AXIS_IS_TMC(X) + if (index < 2) TMC_SET_CURRENT(X); #endif - #if X2_IS_TRINAMIC - if (index == 1) TMC_SET_CURRENT(X2); + #if AXIS_IS_TMC(X2) + if (!(index & 1)) TMC_SET_CURRENT(X2); #endif break; case Y_AXIS: - #if Y_IS_TRINAMIC - if (index == 0) TMC_SET_CURRENT(Y); + #if AXIS_IS_TMC(Y) + if (index < 2) TMC_SET_CURRENT(Y); #endif - #if Y2_IS_TRINAMIC - if (index == 1) TMC_SET_CURRENT(Y2); + #if AXIS_IS_TMC(Y2) + if (!(index & 1)) TMC_SET_CURRENT(Y2); #endif break; case Z_AXIS: - #if Z_IS_TRINAMIC - if (index == 0) TMC_SET_CURRENT(Z); + #if AXIS_IS_TMC(Z) + if (index < 2) TMC_SET_CURRENT(Z); #endif - #if Z2_IS_TRINAMIC - if (index == 1) TMC_SET_CURRENT(Z2); + #if AXIS_IS_TMC(Z2) + if (!(index & 1)) TMC_SET_CURRENT(Z2); #endif break; case E_AXIS: { if (get_target_extruder_from_command(906)) return; switch (target_extruder) { - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) case 0: TMC_SET_CURRENT(E0); break; #endif - #if E1_IS_TRINAMIC - case 1: TMC_SET_CURRENT(E1); break; - #endif - #if E2_IS_TRINAMIC - case 2: TMC_SET_CURRENT(E2); break; - #endif - #if E3_IS_TRINAMIC - case 3: TMC_SET_CURRENT(E3); break; - #endif - #if E4_IS_TRINAMIC - case 4: TMC_SET_CURRENT(E4); break; + #if ENABLED(HANGPRINTER) + // Avoid setting the D-current + #if AXIS_IS_TMC(E1) && EXTRUDERS > 1 + case 1: TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) && EXTRUDERS > 2 + case 2: TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) && EXTRUDERS > 3 + case 3: TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) && EXTRUDERS > 4 + case 4: TMC_SET_CURRENT(E4); break; + #endif + #else + #if AXIS_IS_TMC(E1) + case 1: TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) + case 2: TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) + case 3: TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) + case 4: TMC_SET_CURRENT(E4); break; + #endif #endif } } break; + #if ENABLED(HANGPRINTER) + case D_AXIS: + // D is connected on the first of E1, E2, E3, E4 output that is not an extruder + #if AXIS_IS_TMC(E1) && EXTRUDERS == 1 + TMC_SET_CURRENT(E1); break; + #endif + #if AXIS_IS_TMC(E2) && EXTRUDERS == 2 + TMC_SET_CURRENT(E2); break; + #endif + #if AXIS_IS_TMC(E3) && EXTRUDERS == 3 + TMC_SET_CURRENT(E3); break; + #endif + #if AXIS_IS_TMC(E4) && EXTRUDERS == 4 + TMC_SET_CURRENT(E4); break; + #endif + #endif } } - if (report) LOOP_XYZE(i) switch (i) { - case X_AXIS: - #if X_IS_TRINAMIC - TMC_SAY_CURRENT(X); - #endif - #if X2_IS_TRINAMIC - TMC_SAY_CURRENT(X2); - #endif - break; - case Y_AXIS: - #if Y_IS_TRINAMIC - TMC_SAY_CURRENT(Y); - #endif - #if Y2_IS_TRINAMIC - TMC_SAY_CURRENT(Y2); - #endif - break; - case Z_AXIS: - #if Z_IS_TRINAMIC - TMC_SAY_CURRENT(Z); - #endif - #if Z2_IS_TRINAMIC - TMC_SAY_CURRENT(Z2); - #endif - break; - case E_AXIS: - #if E0_IS_TRINAMIC - TMC_SAY_CURRENT(E0); - #endif - #if E1_IS_TRINAMIC + if (report) { + #if AXIS_IS_TMC(X) + TMC_SAY_CURRENT(X); + #endif + #if AXIS_IS_TMC(X2) + TMC_SAY_CURRENT(X2); + #endif + #if AXIS_IS_TMC(Y) + TMC_SAY_CURRENT(Y); + #endif + #if AXIS_IS_TMC(Y2) + TMC_SAY_CURRENT(Y2); + #endif + #if AXIS_IS_TMC(Z) + TMC_SAY_CURRENT(Z); + #endif + #if AXIS_IS_TMC(Z2) + TMC_SAY_CURRENT(Z2); + #endif + #if AXIS_IS_TMC(E0) + TMC_SAY_CURRENT(E0); + #endif + #if ENABLED(HANGPRINTER) + // D is connected on the first of E1, E2, E3, E4 output that is not an extruder + #if AXIS_IS_TMC(E1) && EXTRUDERS == 1 TMC_SAY_CURRENT(E1); #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) && EXTRUDERS == 2 TMC_SAY_CURRENT(E2); #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) && EXTRUDERS == 3 TMC_SAY_CURRENT(E3); #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) && EXTRUDERS == 4 TMC_SAY_CURRENT(E4); #endif - break; + #else + #if AXIS_IS_TMC(E1) + TMC_SAY_CURRENT(E1); + #endif + #if AXIS_IS_TMC(E2) + TMC_SAY_CURRENT(E2); + #endif + #if AXIS_IS_TMC(E3) + TMC_SAY_CURRENT(E3); + #endif + #if AXIS_IS_TMC(E4) + TMC_SAY_CURRENT(E4); + #endif + #endif } } - #define M91x_USE(A) (ENABLED(A##_IS_TMC2130) || (ENABLED(A##_IS_TMC2208) && PIN_EXISTS(A##_SERIAL_RX))) + #define M91x_USE(ST) (AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && PIN_EXISTS(ST##_SERIAL_RX))) #define M91x_USE_E(N) (E_STEPPERS > N && M91x_USE(E##N)) - #define M91x_USE_X (ENABLED(IS_TRAMS) || M91x_USE(X)) - #define M91x_USE_Y (ENABLED(IS_TRAMS) || M91x_USE(Y)) - #define M91x_USE_Z (ENABLED(IS_TRAMS) || M91x_USE(Z)) - #define M91x_USE_E0 (ENABLED(IS_TRAMS) || M91x_USE_E(0)) /** * M911: Report TMC stepper driver overtemperature pre-warn flag * This flag is held by the library, persisting until cleared by M912 */ inline void gcode_M911() { - #if M91x_USE_X + #if M91x_USE(X) tmc_report_otpw(stepperX, TMC_X); #endif #if M91x_USE(X2) tmc_report_otpw(stepperX2, TMC_X2); #endif - #if M91x_USE_Y + #if M91x_USE(Y) tmc_report_otpw(stepperY, TMC_Y); #endif #if M91x_USE(Y2) tmc_report_otpw(stepperY2, TMC_Y2); #endif - #if M91x_USE_Z + #if M91x_USE(Z) tmc_report_otpw(stepperZ, TMC_Z); #endif #if M91x_USE(Z2) tmc_report_otpw(stepperZ2, TMC_Z2); #endif - #if M91x_USE_E0 + #if M91x_USE_E(0) tmc_report_otpw(stepperE0, TMC_E0); #endif #if M91x_USE_E(1) @@ -11110,12 +11594,12 @@ inline void gcode_M502() { const bool hasX = parser.seen(axis_codes[X_AXIS]), hasY = parser.seen(axis_codes[Y_AXIS]), hasZ = parser.seen(axis_codes[Z_AXIS]), - hasE = parser.seen(axis_codes[E_AXIS]), + hasE = parser.seen(axis_codes[E_CART]), hasNone = !hasX && !hasY && !hasZ && !hasE; - #if M91x_USE_X || M91x_USE(X2) + #if M91x_USE(X) || M91x_USE(X2) const uint8_t xval = parser.byteval(axis_codes[X_AXIS], 10); - #if M91x_USE_X + #if M91x_USE(X) if (hasNone || xval == 1 || (hasX && xval == 10)) tmc_clear_otpw(stepperX, TMC_X); #endif #if M91x_USE(X2) @@ -11123,9 +11607,9 @@ inline void gcode_M502() { #endif #endif - #if M91x_USE_Y || M91x_USE(Y2) + #if M91x_USE(Y) || M91x_USE(Y2) const uint8_t yval = parser.byteval(axis_codes[Y_AXIS], 10); - #if M91x_USE_Y + #if M91x_USE(Y) if (hasNone || yval == 1 || (hasY && yval == 10)) tmc_clear_otpw(stepperY, TMC_Y); #endif #if M91x_USE(Y2) @@ -11133,9 +11617,9 @@ inline void gcode_M502() { #endif #endif - #if M91x_USE_Z || M91x_USE(Z2) + #if M91x_USE(Z) || M91x_USE(Z2) const uint8_t zval = parser.byteval(axis_codes[Z_AXIS], 10); - #if M91x_USE_Z + #if M91x_USE(Z) if (hasNone || zval == 1 || (hasZ && zval == 10)) tmc_clear_otpw(stepperZ, TMC_Z); #endif #if M91x_USE(Z2) @@ -11143,9 +11627,10 @@ inline void gcode_M502() { #endif #endif - #if M91x_USE_E0 || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) + // TODO: If this is a Hangprinter, E_AXIS will not correspond to E0, E1, etc in this way + #if M91x_USE_E(0) || M91x_USE_E(1) || M91x_USE_E(2) || M91x_USE_E(3) || M91x_USE_E(4) const uint8_t eval = parser.byteval(axis_codes[E_AXIS], 10); - #if M91x_USE_E0 + #if M91x_USE_E(0) if (hasNone || eval == 0 || (hasE && eval == 10)) tmc_clear_otpw(stepperE0, TMC_E0); #endif #if M91x_USE_E(1) @@ -11179,45 +11664,45 @@ inline void gcode_M502() { report = false; switch (i) { case X_AXIS: - #if X_IS_TRINAMIC - if (index == 0) TMC_SET_PWMTHRS(X,X); + #if AXIS_HAS_STEALTHCHOP(X) + if (index < 2) TMC_SET_PWMTHRS(X,X); #endif - #if X2_IS_TRINAMIC - if (index == 1) TMC_SET_PWMTHRS(X,X2); + #if AXIS_HAS_STEALTHCHOP(X2) + if (!(index & 1)) TMC_SET_PWMTHRS(X,X2); #endif break; case Y_AXIS: - #if Y_IS_TRINAMIC - if (index == 0) TMC_SET_PWMTHRS(Y,Y); + #if AXIS_HAS_STEALTHCHOP(Y) + if (index < 2) TMC_SET_PWMTHRS(Y,Y); #endif - #if Y2_IS_TRINAMIC - if (index == 1) TMC_SET_PWMTHRS(Y,Y2); + #if AXIS_HAS_STEALTHCHOP(Y2) + if (!(index & 1)) TMC_SET_PWMTHRS(Y,Y2); #endif break; case Z_AXIS: - #if Z_IS_TRINAMIC - if (index == 0) TMC_SET_PWMTHRS(Z,Z); + #if AXIS_HAS_STEALTHCHOP(Z) + if (index < 2) TMC_SET_PWMTHRS(Z,Z); #endif - #if Z2_IS_TRINAMIC - if (index == 1) TMC_SET_PWMTHRS(Z,Z2); + #if AXIS_HAS_STEALTHCHOP(Z2) + if (!(index & 1)) TMC_SET_PWMTHRS(Z,Z2); #endif break; - case E_AXIS: { + case E_CART: { if (get_target_extruder_from_command(913)) return; switch (target_extruder) { - #if E0_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E0) case 0: TMC_SET_PWMTHRS_E(0); break; #endif - #if E_STEPPERS > 1 && E1_IS_TRINAMIC + #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1) case 1: TMC_SET_PWMTHRS_E(1); break; #endif - #if E_STEPPERS > 2 && E2_IS_TRINAMIC + #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2) case 2: TMC_SET_PWMTHRS_E(2); break; #endif - #if E_STEPPERS > 3 && E3_IS_TRINAMIC + #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3) case 3: TMC_SET_PWMTHRS_E(3); break; #endif - #if E_STEPPERS > 4 && E4_IS_TRINAMIC + #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4) case 4: TMC_SET_PWMTHRS_E(4); break; #endif } @@ -11225,48 +11710,40 @@ inline void gcode_M502() { } } - if (report) LOOP_XYZE(i) switch (i) { - case X_AXIS: - #if X_IS_TRINAMIC - TMC_SAY_PWMTHRS(X,X); - #endif - #if X2_IS_TRINAMIC - TMC_SAY_PWMTHRS(X,X2); - #endif - break; - case Y_AXIS: - #if Y_IS_TRINAMIC - TMC_SAY_PWMTHRS(Y,Y); - #endif - #if Y2_IS_TRINAMIC - TMC_SAY_PWMTHRS(Y,Y2); - #endif - break; - case Z_AXIS: - #if Z_IS_TRINAMIC - TMC_SAY_PWMTHRS(Z,Z); - #endif - #if Z2_IS_TRINAMIC - TMC_SAY_PWMTHRS(Z,Z2); - #endif - break; - case E_AXIS: - #if E0_IS_TRINAMIC - TMC_SAY_PWMTHRS_E(0); - #endif - #if E_STEPPERS > 1 && E1_IS_TRINAMIC - TMC_SAY_PWMTHRS_E(1); - #endif - #if E_STEPPERS > 2 && E2_IS_TRINAMIC - TMC_SAY_PWMTHRS_E(2); - #endif - #if E_STEPPERS > 3 && E3_IS_TRINAMIC - TMC_SAY_PWMTHRS_E(3); - #endif - #if E_STEPPERS > 4 && E4_IS_TRINAMIC - TMC_SAY_PWMTHRS_E(4); - #endif - break; + if (report) { + #if AXIS_HAS_STEALTHCHOP(X) + TMC_SAY_PWMTHRS(X,X); + #endif + #if AXIS_HAS_STEALTHCHOP(X2) + TMC_SAY_PWMTHRS(X,X2); + #endif + #if AXIS_HAS_STEALTHCHOP(Y) + TMC_SAY_PWMTHRS(Y,Y); + #endif + #if AXIS_HAS_STEALTHCHOP(Y2) + TMC_SAY_PWMTHRS(Y,Y2); + #endif + #if AXIS_HAS_STEALTHCHOP(Z) + TMC_SAY_PWMTHRS(Z,Z); + #endif + #if AXIS_HAS_STEALTHCHOP(Z2) + TMC_SAY_PWMTHRS(Z,Z2); + #endif + #if AXIS_HAS_STEALTHCHOP(E0) + TMC_SAY_PWMTHRS_E(0); + #endif + #if E_STEPPERS > 1 && AXIS_HAS_STEALTHCHOP(E1) + TMC_SAY_PWMTHRS_E(1); + #endif + #if E_STEPPERS > 2 && AXIS_HAS_STEALTHCHOP(E2) + TMC_SAY_PWMTHRS_E(2); + #endif + #if E_STEPPERS > 3 && AXIS_HAS_STEALTHCHOP(E3) + TMC_SAY_PWMTHRS_E(3); + #endif + #if E_STEPPERS > 4 && AXIS_HAS_STEALTHCHOP(E4) + TMC_SAY_PWMTHRS_E(4); + #endif } } #endif // HYBRID_THRESHOLD @@ -11287,67 +11764,61 @@ inline void gcode_M502() { switch (i) { #if X_SENSORLESS case X_AXIS: - #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) - if (index == 0) TMC_SET_SGT(X); + #if AXIS_HAS_STALLGUARD(X) + if (index < 2) TMC_SET_SGT(X); #endif - #if ENABLED(X2_IS_TMC2130) - if (index == 1) TMC_SET_SGT(X2); + #if AXIS_HAS_STALLGUARD(X2) + if (!(index & 1)) TMC_SET_SGT(X2); #endif break; #endif #if Y_SENSORLESS case Y_AXIS: - #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) - if (index == 0) TMC_SET_SGT(Y); + #if AXIS_HAS_STALLGUARD(Y) + if (index < 2) TMC_SET_SGT(Y); #endif - #if ENABLED(Y2_IS_TMC2130) - if (index == 1) TMC_SET_SGT(Y2); + #if AXIS_HAS_STALLGUARD(Y2) + if (!(index & 1)) TMC_SET_SGT(Y2); #endif break; #endif #if Z_SENSORLESS case Z_AXIS: - #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) - if (index == 0) TMC_SET_SGT(Z); + #if AXIS_HAS_STALLGUARD(Z) + if (index < 2) TMC_SET_SGT(Z); #endif - #if ENABLED(Z2_IS_TMC2130) - if (index == 1) TMC_SET_SGT(Z2); + #if AXIS_HAS_STALLGUARD(Z2) + if (!(index & 1)) TMC_SET_SGT(Z2); #endif break; #endif } } - if (report) LOOP_XYZ(i) switch (i) { + if (report) { #if X_SENSORLESS - case X_AXIS: - #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) - TMC_SAY_SGT(X); - #endif - #if ENABLED(X2_IS_TMC2130) - TMC_SAY_SGT(X2); - #endif - break; + #if AXIS_HAS_STALLGUARD(X) + TMC_SAY_SGT(X); + #endif + #if AXIS_HAS_STALLGUARD(X2) + TMC_SAY_SGT(X2); + #endif #endif #if Y_SENSORLESS - case Y_AXIS: - #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) - TMC_SAY_SGT(Y); - #endif - #if ENABLED(Y2_IS_TMC2130) - TMC_SAY_SGT(Y2); - #endif - break; + #if AXIS_HAS_STALLGUARD(Y) + TMC_SAY_SGT(Y); + #endif + #if AXIS_HAS_STALLGUARD(Y2) + TMC_SAY_SGT(Y2); + #endif #endif #if Z_SENSORLESS - case Z_AXIS: - #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) - TMC_SAY_SGT(Z); - #endif - #if ENABLED(Z2_IS_TMC2130) - TMC_SAY_SGT(Z2); - #endif - break; + #if AXIS_HAS_STALLGUARD(Z) + TMC_SAY_SGT(Z); + #endif + #if AXIS_HAS_STALLGUARD(Z2) + TMC_SAY_SGT(Z2); + #endif #endif } } @@ -11366,11 +11837,11 @@ inline void gcode_M502() { return; } - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) const uint16_t Z_current_1 = stepperZ.getCurrent(); stepperZ.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) const uint16_t Z2_current_1 = stepperZ2.getCurrent(); stepperZ2.setCurrent(_rms, R_SENSE, HOLD_MULTIPLIER); #endif @@ -11381,10 +11852,10 @@ inline void gcode_M502() { do_blocking_move_to_z(Z_MAX_POS+_z); - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) stepperZ.setCurrent(Z_current_1, R_SENSE, HOLD_MULTIPLIER); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) stepperZ2.setCurrent(Z2_current_1, R_SENSE, HOLD_MULTIPLIER); #endif @@ -11566,7 +12037,7 @@ inline void gcode_M355() { } else { if (!USEABLE_HARDWARE_PWM(CASE_LIGHT_PIN)) SERIAL_ECHOLNPGM("Case light: on"); - else SERIAL_ECHOLNPAIR("Case light: ", (int)case_light_brightness); + else SERIAL_ECHOLNPAIR("Case light: ", int(case_light_brightness)); } #else @@ -11580,44 +12051,39 @@ inline void gcode_M355() { /** * M163: Set a single mix factor for a mixing extruder * This is called "weight" by some systems. + * The 'P' values must sum to 1.0 or must be followed by M164 to normalize them. * * S[index] The channel index to set * P[float] The mix value - * */ inline void gcode_M163() { const int mix_index = parser.intval('S'); - if (mix_index < MIXING_STEPPERS) { - float mix_value = parser.floatval('P'); - NOLESS(mix_value, 0.0); - mixing_factor[mix_index] = RECIPROCAL(mix_value); - } + if (mix_index < MIXING_STEPPERS) + mixing_factor[mix_index] = MAX(parser.floatval('P'), 0.0); } - #if MIXING_VIRTUAL_TOOLS > 1 - - /** - * M164: Store the current mix factors as a virtual tool. - * - * S[index] The virtual tool to store - * - */ - inline void gcode_M164() { - const int tool_index = parser.intval('S'); - if (tool_index < MIXING_VIRTUAL_TOOLS) { - normalize_mix(); + /** + * M164: Normalize and commit the mix. + * If 'S' is given store as a virtual tool. (Requires MIXING_VIRTUAL_TOOLS > 1) + * + * S[index] The virtual tool to store + */ + inline void gcode_M164() { + normalize_mix(); + #if MIXING_VIRTUAL_TOOLS > 1 + const int tool_index = parser.intval('S', -1); + if (WITHIN(tool_index, 0, MIXING_VIRTUAL_TOOLS - 1)) { for (uint8_t i = 0; i < MIXING_STEPPERS; i++) mixing_virtual_tool_mix[tool_index][i] = mixing_factor[i]; } - } - - #endif + #endif + } #if ENABLED(DIRECT_MIXING_IN_G1) /** * M165: Set multiple mix factors for a mixing extruder. * Factors that are left out will be set to 0. - * All factors together must add up to 1.0. + * All factors should sum to 1.0, but they will be normalized regardless. * * A[factor] Mix factor for extruder stepper 1 * B[factor] Mix factor for extruder stepper 2 @@ -11625,7 +12091,6 @@ inline void gcode_M355() { * D[factor] Mix factor for extruder stepper 4 * H[factor] Mix factor for extruder stepper 5 * I[factor] Mix factor for extruder stepper 6 - * */ inline void gcode_M165() { gcode_get_mix(); } #endif @@ -11792,7 +12257,7 @@ inline void invalid_extruder_error(const uint8_t e) { i == 0 ? current_position[X_AXIS] : xhome, current_position[Y_AXIS], i == 2 ? current_position[Z_AXIS] : raised_z, - current_position[E_AXIS], + current_position[E_CART], planner.max_feedrate_mm_s[i == 1 ? X_AXIS : Z_AXIS], active_extruder ); @@ -11863,7 +12328,7 @@ inline void invalid_extruder_error(const uint8_t e) { #if ENABLED(PARKING_EXTRUDER) - inline void parking_extruder_tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) { + inline void parking_extruder_tool_change(const uint8_t tmp_extruder, bool no_move) { constexpr float z_raise = PARKING_EXTRUDER_SECURITY_RAISE; if (!no_move) { @@ -11977,6 +12442,14 @@ inline void invalid_extruder_error(const uint8_t e) { * previous tool out of the way and the new tool into place. */ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool no_move/*=false*/) { + planner.synchronize(); + + #if HAS_LEVELING + // Set current position to the physical position + const bool leveling_was_active = planner.leveling_active; + set_bed_leveling_enabled(false); + #endif + #if ENABLED(MIXING_EXTRUDER) && MIXING_VIRTUAL_TOOLS > 1 mixing_tool_change(tmp_extruder); @@ -12000,22 +12473,27 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n #endif } - // Save current position to destination, for use later - set_destination_from_current(); - - #if HAS_LEVELING - // Set current position to the physical position - const bool leveling_was_active = planner.leveling_active; - set_bed_leveling_enabled(false); - #endif - #if ENABLED(DUAL_X_CARRIAGE) + #if HAS_SOFTWARE_ENDSTOPS + // Update the X software endstops early + active_extruder = tmp_extruder; + update_software_endstops(X_AXIS); + active_extruder = !tmp_extruder; + #endif + + // Don't move the new extruder out of bounds + if (!WITHIN(current_position[X_AXIS], soft_endstop_min[X_AXIS], soft_endstop_max[X_AXIS])) + no_move = true; + + if (!no_move) set_destination_from_current(); dualx_tool_change(tmp_extruder, no_move); // Can modify no_move #else // !DUAL_X_CARRIAGE - #if ENABLED(PARKING_EXTRUDER) // Dual Parking extruder + set_destination_from_current(); + + #if ENABLED(PARKING_EXTRUDER) parking_extruder_tool_change(tmp_extruder, no_move); #endif @@ -12052,11 +12530,6 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n current_position[Z_AXIS] -= zdiff; #endif - #if HAS_LEVELING - // Restore leveling to re-establish the logical position - set_bed_leveling_enabled(leveling_was_active); - #endif - // Tell the planner the new "current position" SYNC_PLAN_POSITION_KINEMATIC(); @@ -12100,6 +12573,10 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n feedrate_mm_s = old_feedrate_mm_s; + #if HAS_SOFTWARE_ENDSTOPS && ENABLED(DUAL_X_CARRIAGE) + update_software_endstops(X_AXIS); + #endif + #else // HOTENDS <= 1 UNUSED(fr_mm_s); @@ -12126,8 +12603,13 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n fanmux_switch(active_extruder); #endif + #if HAS_LEVELING + // Restore leveling to re-establish the logical position + set_bed_leveling_enabled(leveling_was_active); + #endif + SERIAL_ECHO_START(); - SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, (int)active_extruder); + SERIAL_ECHOLNPAIR(MSG_ACTIVE_EXTRUDER, int(active_extruder)); #endif // !MIXING_EXTRUDER || MIXING_VIRTUAL_TOOLS <= 1 } @@ -12197,6 +12679,10 @@ void process_parsed_command() { case 5: gcode_G5(); break; // G5: Cubic B_spline #endif + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + case 6: gcode_G6(); break; // G6: Direct stepper move + #endif + #if ENABLED(FWRETRACT) case 10: gcode_G10(); break; // G10: Retract case 11: gcode_G11(); break; // G11: Prime @@ -12259,6 +12745,10 @@ void process_parsed_command() { case 91: relative_mode = true; break; // G91: Relative coordinates case 92: gcode_G92(); break; // G92: Set Position + #if ENABLED(MECHADUINO_I2C_COMMANDS) + case 95: gcode_G95(); break; // G95: Set torque mode + case 96: gcode_G96(); break; // G96: Mark encoder reference point + #endif #if ENABLED(DEBUG_GCODE_PARSER) case 800: parser.debug(); break; // G800: GCode Parser Test for G @@ -12339,6 +12829,8 @@ void process_parsed_command() { case 108: gcode_M108(); break; // M108: Cancel Waiting case 112: gcode_M112(); break; // M112: Emergency Stop case 410: gcode_M410(); break; // M410: Quickstop. Abort all planned moves + #else + case 108: case 112: case 410: break; // Silently drop as handled by emergency parser #endif #if ENABLED(HOST_KEEPALIVE_FEATURE) @@ -12539,6 +13031,10 @@ void process_parsed_command() { case 504: gcode_M504(); break; // M504: Validate EEPROM #endif + #if ENABLED(SDSUPPORT) + case 524: gcode_M524(); break; // M524: Abort SD print job + #endif + #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) case 540: gcode_M540(); break; // M540: Set Abort on Endstop Hit for SD Printing #endif @@ -12552,8 +13048,8 @@ void process_parsed_command() { case 605: gcode_M605(); break; // M605: Set Dual X Carriage movement mode #endif - #if ENABLED(DELTA) - case 665: gcode_M665(); break; // M665: Delta Configuration + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) + case 665: gcode_M665(); break; // M665: Delta / Hangprinter Configuration #endif #if ENABLED(DELTA) || ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) case 666: gcode_M666(); break; // M666: DELTA/Dual Endstop Adjustment @@ -12607,7 +13103,7 @@ void process_parsed_command() { #endif #endif - #if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208) #if ENABLED(TMC_DEBUG) case 122: gcode_M122(); break; // M122: Debug TMC steppers #endif @@ -13004,6 +13500,115 @@ void ok_to_send() { #endif // DELTA +#if ENABLED(HANGPRINTER) + + /** + * Recalculate factors used for hangprinter kinematics whenever + * settings have been changed (e.g., by M665). + */ + void recalc_hangprinter_settings(){ + HANGPRINTER_IK_ORIGIN(line_lengths_origin); + + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + + const uint8_t mech_adv_tmp[MOV_AXIS] = MECHANICAL_ADVANTAGE, + actn_pts_tmp[MOV_AXIS] = ACTION_POINTS; + const uint16_t m_g_t_tmp[MOV_AXIS] = MOTOR_GEAR_TEETH, + s_g_t_tmp[MOV_AXIS] = SPOOL_GEAR_TEETH; + const float mnt_l_tmp[MOV_AXIS] = MOUNTED_LINE; + float s_r2_tmp[MOV_AXIS] = SPOOL_RADII, + steps_per_unit_times_r_tmp[MOV_AXIS]; + uint8_t nr_lines_dir_tmp[MOV_AXIS]; + + LOOP_MOV_AXIS(i){ + steps_per_unit_times_r_tmp[i] = (float(mech_adv_tmp[i])*STEPS_PER_MOTOR_REVOLUTION*s_g_t_tmp[i])/(2*M_PI*m_g_t_tmp[i]); + nr_lines_dir_tmp[i] = mech_adv_tmp[i]*actn_pts_tmp[i]; + s_r2_tmp[i] *= s_r2_tmp[i]; + planner.k2[i] = -(float)nr_lines_dir_tmp[i]*SPOOL_BUILDUP_FACTOR; + planner.k0[i] = 2.0*steps_per_unit_times_r_tmp[i]/planner.k2[i]; + } + + // Assumes spools are mounted near D-anchor in ceiling + #define HYP3D(x,y,z) SQRT(sq(x) + sq(y) + sq(z)) + float line_on_spool_origin_tmp[MOV_AXIS]; + line_on_spool_origin_tmp[A_AXIS] = actn_pts_tmp[A_AXIS] * mnt_l_tmp[A_AXIS] + - actn_pts_tmp[A_AXIS] * HYPOT(anchor_A_y, anchor_D_z - anchor_A_z) + - nr_lines_dir_tmp[A_AXIS] * line_lengths_origin[A_AXIS]; + line_on_spool_origin_tmp[B_AXIS] = actn_pts_tmp[B_AXIS] * mnt_l_tmp[B_AXIS] + - actn_pts_tmp[B_AXIS] * HYP3D(anchor_B_x, anchor_B_y, anchor_D_z - anchor_B_z) + - nr_lines_dir_tmp[B_AXIS] * line_lengths_origin[B_AXIS]; + line_on_spool_origin_tmp[C_AXIS] = actn_pts_tmp[C_AXIS] * mnt_l_tmp[C_AXIS] + - actn_pts_tmp[C_AXIS] * HYP3D(anchor_C_x, anchor_C_y, anchor_D_z - anchor_C_z) + - nr_lines_dir_tmp[C_AXIS] * line_lengths_origin[C_AXIS]; + line_on_spool_origin_tmp[D_AXIS] = actn_pts_tmp[D_AXIS] * mnt_l_tmp[D_AXIS] + - nr_lines_dir_tmp[D_AXIS] * line_lengths_origin[D_AXIS]; + + LOOP_MOV_AXIS(i) { + planner.axis_steps_per_mm[i] = steps_per_unit_times_r_tmp[i] / + SQRT((SPOOL_BUILDUP_FACTOR) * line_on_spool_origin_tmp[i] + s_r2_tmp[i]); + planner.k1[i] = (SPOOL_BUILDUP_FACTOR) * + (line_on_spool_origin_tmp[i] + nr_lines_dir_tmp[i] * line_lengths_origin[i]) + s_r2_tmp[i]; + + planner.sqrtk1[i] = SQRT(planner.k1[i]); + } + planner.axis_steps_per_mm[E_AXIS] = DEFAULT_E_AXIS_STEPS_PER_UNIT; + + #endif // LINE_BUILDUP_COMPENSATION_FEATURE + + SYNC_PLAN_POSITION_KINEMATIC(); // recalcs line lengths in case anchor was moved + } + + /** + * Hangprinter inverse kinematics + */ + void inverse_kinematics(const float raw[XYZ]) { + HANGPRINTER_IK(raw); + } + + /** + * Hangprinter forward kinematics + * Basic idea is to subtract squared line lengths to get linear equations. + * Subtracting d*d from a*a, b*b, and c*c gives the cleanest derivation: + * + * a*a - d*d = k1 + k2*y + k3*z <---- a line (I) + * b*b - d*d = k4 + k5*x + k6*y + k7*z <---- a plane (II) + * c*c - d*d = k8 + k9*x + k10*y + k11*z <---- a plane (III) + * + * Use (I) to reduce (II) and (III) into lines. Eliminate y, keep z. + * + * (II): b*b - d*d = k12 + k13*x + k14*z + * <=> x = k0b + k1b*z, <---- a line (IV) + * + * (III): c*c - d*d = k15 + k16*x + k17*z + * <=> x = k0c + k1c*z, <---- a line (V) + * + * where k1, k2, ..., k17, k0b, k0c, k1b, and k1c are known constants. + * + * These two straight lines are not parallel, so they will cross in exactly one point. + * Find z by setting (IV) = (V) + * Find x by inserting z into (V) + * Find y by inserting z into (I) + * + * Warning: truncation errors will typically be in the order of a few tens of microns. + */ + void forward_kinematics_HANGPRINTER(float a, float b, float c, float d){ + const float Asq = sq(anchor_A_y) + sq(anchor_A_z), + Bsq = sq(anchor_B_x) + sq(anchor_B_y) + sq(anchor_B_z), + Csq = sq(anchor_C_x) + sq(anchor_C_y) + sq(anchor_C_z), + Dsq = sq(anchor_D_z), + aa = sq(a), + dd = sq(d), + k0b = (-sq(b) + Bsq - Dsq + dd) / (2.0 * anchor_B_x) + (anchor_B_y / (2.0 * anchor_A_y * anchor_B_x)) * (Dsq - Asq + aa - dd), + k0c = (-sq(c) + Csq - Dsq + dd) / (2.0 * anchor_C_x) + (anchor_C_y / (2.0 * anchor_A_y * anchor_C_x)) * (Dsq - Asq + aa - dd), + k1b = (anchor_B_y * (anchor_A_z - anchor_D_z)) / (anchor_A_y * anchor_B_x) + (anchor_D_z - anchor_B_z) / anchor_B_x, + k1c = (anchor_C_y * (anchor_A_z - anchor_D_z)) / (anchor_A_y * anchor_C_x) + (anchor_D_z - anchor_C_z) / anchor_C_x; + + cartes[Z_AXIS] = (k0b - k0c) / (k1c - k1b); + cartes[X_AXIS] = k0c + k1c * cartes[Z_AXIS]; + cartes[Y_AXIS] = (Asq - Dsq - aa + dd) / (2.0 * anchor_A_y) + ((anchor_D_z - anchor_A_z) / anchor_A_y) * cartes[Z_AXIS]; + } +#endif // HANGPRINTER + /** * Get the stepper positions in the cartes[] array. * Forward kinematics are applied for DELTA and SCARA. @@ -13020,6 +13625,13 @@ void get_cartesian_from_steppers() { planner.get_axis_position_mm(B_AXIS), planner.get_axis_position_mm(C_AXIS) ); + #elif ENABLED(HANGPRINTER) + forward_kinematics_HANGPRINTER( + planner.get_axis_position_mm(A_AXIS), + planner.get_axis_position_mm(B_AXIS), + planner.get_axis_position_mm(C_AXIS), + planner.get_axis_position_mm(D_AXIS) + ); #else #if IS_SCARA forward_kinematics_SCARA( @@ -13079,7 +13691,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { // Remaining cartesian distances const float zdiff = destination[Z_AXIS] - current_position[Z_AXIS], - ediff = destination[E_AXIS] - current_position[E_AXIS]; + ediff = destination[E_CART] - current_position[E_CART]; // Get the linear distance in XYZ // If the move is very short, check the E move distance @@ -13154,6 +13766,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { } #define MBL_SEGMENT_END(A) (current_position[_AXIS(A)] + (destination[_AXIS(A)] - current_position[_AXIS(A)]) * normalized_dist) + #define MBL_SEGMENT_END_E (current_position[E_CART] + (destination[E_CART] - current_position[E_CART]) * normalized_dist) float normalized_dist, end[XYZE]; const int8_t gcx = MAX(cx1, cx2), gcy = MAX(cy1, cy2); @@ -13185,7 +13798,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { } destination[Z_AXIS] = MBL_SEGMENT_END(Z); - destination[E_AXIS] = MBL_SEGMENT_END(E); + destination[E_CART] = MBL_SEGMENT_END_E; // Do the split and look for more borders mesh_line_to_destination(fr_mm_s, x_splits, y_splits); @@ -13222,6 +13835,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { } #define LINE_SEGMENT_END(A) (current_position[_AXIS(A)] + (destination[_AXIS(A)] - current_position[_AXIS(A)]) * normalized_dist) + #define LINE_SEGMENT_END_E (current_position[E_CART] + (destination[E_CART] - current_position[E_CART]) * normalized_dist) float normalized_dist, end[XYZE]; const int8_t gcx = MAX(cx1, cx2), gcy = MAX(cy1, cy2); @@ -13253,7 +13867,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { } destination[Z_AXIS] = LINE_SEGMENT_END(Z); - destination[E_AXIS] = LINE_SEGMENT_END(E); + destination[E_CART] = LINE_SEGMENT_END_E; // Do the split and look for more borders bilinear_line_to_destination(fr_mm_s, x_splits, y_splits); @@ -13284,10 +13898,10 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #endif /** - * Prepare a linear move in a DELTA or SCARA setup. + * Prepare a linear move in a DELTA, SCARA or HANGPRINTER setup. * * This calls planner.buffer_line several times, adding - * small incremental moves for DELTA or SCARA. + * small incremental moves for DELTA, SCARA or HANGPRINTER. * * For Unified Bed Leveling (Delta or Segmented Cartesian) * the ubl.prepare_segmented_line_to method replaces this. @@ -13298,10 +13912,18 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { const float _feedrate_mm_s = MMS_SCALED(feedrate_mm_s); const float xdiff = rtarget[X_AXIS] - current_position[X_AXIS], - ydiff = rtarget[Y_AXIS] - current_position[Y_AXIS]; + ydiff = rtarget[Y_AXIS] - current_position[Y_AXIS] + #if ENABLED(HANGPRINTER) + , zdiff = rtarget[Z_AXIS] - current_position[Z_AXIS] + #endif + ; - // If the move is only in Z/E don't split up the move - if (!xdiff && !ydiff) { + // If the move is only in Z/E (for Hangprinter only in E) don't split up the move + if (!xdiff && !ydiff + #if ENABLED(HANGPRINTER) + && !zdiff + #endif + ) { planner.buffer_line_kinematic(rtarget, _feedrate_mm_s, active_extruder); return false; // caller will update current_position } @@ -13310,8 +13932,11 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { if (!position_is_reachable(rtarget[X_AXIS], rtarget[Y_AXIS])) return true; // Remaining cartesian distances - const float zdiff = rtarget[Z_AXIS] - current_position[Z_AXIS], - ediff = rtarget[E_AXIS] - current_position[E_AXIS]; + const float + #if DISABLED(HANGPRINTER) + zdiff = rtarget[Z_AXIS] - current_position[Z_AXIS], + #endif + ediff = rtarget[E_CART] - current_position[E_CART]; // Get the linear distance in XYZ // If the move is very short, check the E move distance @@ -13405,6 +14030,8 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { LOOP_XYZE(i) raw[i] += segment_distance[i]; #if ENABLED(DELTA) && HOTENDS < 2 DELTA_IK(raw); // Delta can inline its kinematics + #elif ENABLED(HANGPRINTER) + HANGPRINTER_IK(raw); // Modifies line_lengths[ABCD] #else inverse_kinematics(raw); #endif @@ -13414,7 +14041,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #if ENABLED(SCARA_FEEDRATE_SCALING) // For SCARA scale the feed rate from mm/s to degrees/s // i.e., Complete the angular vector in the given time. - if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder)) + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_CART], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder, segment_length)) break; /* SERIAL_ECHO(segments); @@ -13427,7 +14054,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #elif ENABLED(DELTA_FEEDRATE_SCALING) // For DELTA scale the feed rate from Effector mm/s to Carriage mm/s // i.e., Complete the linear vector in the given time. - if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder)) + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder, segment_length)) break; /* SERIAL_ECHO(segments); @@ -13437,8 +14064,11 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { safe_delay(5); //*/ oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; oldC = delta[C_AXIS]; + #elif ENABLED(HANGPRINTER) + if (!planner.buffer_line(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], raw[E_CART], _feedrate_mm_s, active_extruder, cartesian_segment_mm)) + break; #else - if (!planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], _feedrate_mm_s, active_extruder, cartesian_segment_mm)) + if (!planner.buffer_line(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_CART], _feedrate_mm_s, active_extruder, cartesian_segment_mm)) break; #endif } @@ -13452,7 +14082,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #if ENABLED(SCARA_FEEDRATE_SCALING) const float diff2 = HYPOT2(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB); if (diff2) { - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], rtarget[Z_AXIS], rtarget[E_CART], SQRT(diff2) * inverse_secs, active_extruder, segment_length); /* SERIAL_ECHOPAIR("final: A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); SERIAL_ECHOPAIR(" adiff=", delta[A_AXIS] - oldA); SERIAL_ECHOPAIR(" bdiff=", delta[B_AXIS] - oldB); @@ -13464,7 +14094,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { #elif ENABLED(DELTA_FEEDRATE_SCALING) const float diff2 = sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC); if (diff2) { - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], rtarget[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], rtarget[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder, segment_length); /* SERIAL_ECHOPAIR("final: A=", delta[A_AXIS]); SERIAL_ECHOPAIR(" B=", delta[B_AXIS]); SERIAL_ECHOPAIR(" C=", delta[C_AXIS]); SERIAL_ECHOPAIR(" adiff=", delta[A_AXIS] - oldA); SERIAL_ECHOPAIR(" bdiff=", delta[B_AXIS] - oldB); SERIAL_ECHOPAIR(" cdiff=", delta[C_AXIS] - oldC); @@ -13535,7 +14165,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { case DXC_FULL_CONTROL_MODE: break; case DXC_AUTO_PARK_MODE: - if (current_position[E_AXIS] == destination[E_AXIS]) { + if (current_position[E_CART] == destination[E_CART]) { // This is a travel move (with no extrusion) // Skip it, but keep track of the current position // (so it can be used as the start of the next non-travel move) @@ -13552,7 +14182,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { i == 0 ? raised_parked_position[X_AXIS] : current_position[X_AXIS], i == 0 ? raised_parked_position[Y_AXIS] : current_position[Y_AXIS], i == 2 ? current_position[Z_AXIS] : raised_parked_position[Z_AXIS], - current_position[E_AXIS], + current_position[E_CART], i == 1 ? PLANNER_XY_FEEDRATE() : planner.max_feedrate_mm_s[Z_AXIS], active_extruder) ) break; @@ -13572,10 +14202,10 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { } #endif // move duplicate extruder into correct duplication position. - planner.set_position_mm(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS]); + planner.set_position_mm(inactive_extruder_x_pos, current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART]); if (!planner.buffer_line( current_position[X_AXIS] + duplicate_extruder_x_offset, - current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS], + current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART], planner.max_feedrate_mm_s[X_AXIS], 1) ) break; planner.synchronize(); @@ -13602,7 +14232,7 @@ void set_current_from_steppers_for_axis(const AxisEnum axis) { * Prepare a single move and get ready for the next one * * This may result in several calls to planner.buffer_line to - * do smaller moves for DELTA, SCARA, mesh moves, etc. + * do smaller moves for DELTA, SCARA, HANGPRINTER, mesh moves, etc. * * Make sure current_position[E] and destination[E] are good * before calling or cold/lengthy extrusion may get missed. @@ -13613,17 +14243,17 @@ void prepare_move_to_destination() { #if ENABLED(PREVENT_COLD_EXTRUSION) || ENABLED(PREVENT_LENGTHY_EXTRUDE) if (!DEBUGGING(DRYRUN)) { - if (destination[E_AXIS] != current_position[E_AXIS]) { + if (destination[E_CART] != current_position[E_CART]) { #if ENABLED(PREVENT_COLD_EXTRUSION) if (thermalManager.tooColdToExtrude(active_extruder)) { - current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part + current_position[E_CART] = destination[E_CART]; // Behave as if the move really took place, but ignore E part SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); } #endif // PREVENT_COLD_EXTRUSION #if ENABLED(PREVENT_LENGTHY_EXTRUDE) - if (ABS(destination[E_AXIS] - current_position[E_AXIS]) * planner.e_factor[active_extruder] > (EXTRUDE_MAXLENGTH)) { - current_position[E_AXIS] = destination[E_AXIS]; // Behave as if the move really took place, but ignore E part + if (ABS(destination[E_CART] - current_position[E_CART]) * planner.e_factor[active_extruder] > (EXTRUDE_MAXLENGTH)) { + current_position[E_CART] = destination[E_CART]; // Behave as if the move really took place, but ignore E part SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); } @@ -13692,7 +14322,7 @@ void prepare_move_to_destination() { rt_X = cart[p_axis] - center_P, rt_Y = cart[q_axis] - center_Q, linear_travel = cart[l_axis] - current_position[l_axis], - extruder_travel = cart[E_AXIS] - current_position[E_AXIS]; + extruder_travel = cart[E_CART] - current_position[E_CART]; // CCW angle of rotation between position and target from the circle center. Only one atan2() trig computation required. float angular_travel = ATAN2(r_P * rt_Y - r_Q * rt_X, r_P * rt_X + r_Q * rt_Y); @@ -13748,7 +14378,7 @@ void prepare_move_to_destination() { raw[l_axis] = current_position[l_axis]; // Initialize the extruder axis - raw[E_AXIS] = current_position[E_AXIS]; + raw[E_CART] = current_position[E_CART]; const float fr_mm_s = MMS_SCALED(feedrate_mm_s); @@ -13805,7 +14435,7 @@ void prepare_move_to_destination() { raw[p_axis] = center_P + r_P; raw[q_axis] = center_Q + r_Q; raw[l_axis] += linear_per_segment; - raw[E_AXIS] += extruder_per_segment; + raw[E_CART] += extruder_per_segment; clamp_to_software_endstops(raw); @@ -13817,19 +14447,19 @@ void prepare_move_to_destination() { #if ENABLED(SCARA_FEEDRATE_SCALING) // For SCARA scale the feed rate from mm/s to degrees/s // i.e., Complete the angular vector in the given time. - if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_AXIS], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder)) + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], raw[Z_AXIS], raw[E_CART], HYPOT(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT)) break; oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; #elif ENABLED(DELTA_FEEDRATE_SCALING) // For DELTA scale the feed rate from Effector mm/s to Carriage mm/s // i.e., Complete the linear vector in the given time. - if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder)) + if (!planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], raw[E_AXIS], SQRT(sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC)) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT)) break; oldA = delta[A_AXIS]; oldB = delta[B_AXIS]; oldC = delta[C_AXIS]; #elif HAS_UBL_AND_CURVES float pos[XYZ] = { raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS] }; planner.apply_leveling(pos); - if (!planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], raw[E_AXIS], fr_mm_s, active_extruder)) + if (!planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], raw[E_CART], fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT)) break; #else if (!planner.buffer_line_kinematic(raw, fr_mm_s, active_extruder)) @@ -13846,15 +14476,15 @@ void prepare_move_to_destination() { #if ENABLED(SCARA_FEEDRATE_SCALING) const float diff2 = HYPOT2(delta[A_AXIS] - oldA, delta[B_AXIS] - oldB); if (diff2) - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], cart[Z_AXIS], cart[E_CART], SQRT(diff2) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT); #elif ENABLED(DELTA_FEEDRATE_SCALING) const float diff2 = sq(delta[A_AXIS] - oldA) + sq(delta[B_AXIS] - oldB) + sq(delta[C_AXIS] - oldC); if (diff2) - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_AXIS], SQRT(diff2) * inverse_secs, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_CART], SQRT(diff2) * inverse_secs, active_extruder, MM_PER_ARC_SEGMENT); #elif HAS_UBL_AND_CURVES float pos[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; planner.apply_leveling(pos); - planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], cart[E_AXIS], fr_mm_s, active_extruder); + planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], cart[E_CART], fr_mm_s, active_extruder, MM_PER_ARC_SEGMENT); #else planner.buffer_line_kinematic(cart, fr_mm_s, active_extruder); #endif @@ -13881,26 +14511,34 @@ void prepare_move_to_destination() { const millis_t ms = millis(); if (ELAPSED(ms, nextMotorCheck)) { nextMotorCheck = ms + 2500UL; // Not a time critical function, so only check every 2.5s + + // If any of the drivers or the bed are enabled... if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON #if HAS_HEATED_BED || thermalManager.soft_pwm_amount_bed > 0 #endif - || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled... + #if HAS_X2_ENABLE + || X2_ENABLE_READ == X_ENABLE_ON + #endif + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ == Z_ENABLE_ON + #endif + || E0_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 1 || E1_ENABLE_READ == E_ENABLE_ON - #if HAS_X2_ENABLE - || X2_ENABLE_READ == X_ENABLE_ON - #endif #if E_STEPPERS > 2 - || E2_ENABLE_READ == E_ENABLE_ON + || E2_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 3 - || E3_ENABLE_READ == E_ENABLE_ON + || E3_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 4 - || E4_ENABLE_READ == E_ENABLE_ON - #endif // E_STEPPERS > 4 - #endif // E_STEPPERS > 3 - #endif // E_STEPPERS > 2 - #endif // E_STEPPERS > 1 + || E4_ENABLE_READ == E_ENABLE_ON + #endif + #endif + #endif + #endif ) { lastMotorOn = ms; //... set time to NOW so the fan will turn on } @@ -14033,14 +14671,21 @@ void enable_all_steppers() { #if ENABLED(AUTO_POWER_CONTROL) powerManager.power_on(); #endif - enable_X(); - enable_Y(); - enable_Z(); + #if ENABLED(HANGPRINTER) + enable_A(); + enable_B(); + enable_C(); + enable_D(); + #else + enable_X(); + enable_Y(); + enable_Z(); + enable_E4(); + #endif enable_E0(); enable_E1(); enable_E2(); enable_E3(); - enable_E4(); } void disable_e_stepper(const uint8_t e) { @@ -14159,7 +14804,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { // --------------------------------------------------------- static int homeDebounceCount = 0; // poor man's debouncing count const int HOME_DEBOUNCE_DELAY = 2500; - if (!IS_SD_PRINTING && !READ(HOME_PIN)) { + if (!IS_SD_PRINTING() && !READ(HOME_PIN)) { if (!homeDebounceCount) { enqueue_and_echo_commands_P(PSTR("G28")); LCD_MESSAGEPGM(MSG_AUTO_HOME); @@ -14214,10 +14859,10 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) { } #endif // !SWITCHING_EXTRUDER - const float olde = current_position[E_AXIS]; - current_position[E_AXIS] += EXTRUDER_RUNOUT_EXTRUDE; + const float olde = current_position[E_CART]; + current_position[E_CART] += EXTRUDER_RUNOUT_EXTRUDE; planner.buffer_line_kinematic(current_position, MMM_TO_MMS(EXTRUDER_RUNOUT_SPEED), active_extruder); - current_position[E_AXIS] = olde; + current_position[E_CART] = olde; planner.set_e_position_mm(olde); planner.synchronize(); @@ -14283,7 +14928,7 @@ void idle( #endif ) { #if ENABLED(MAX7219_DEBUG) - Max7219_idle_tasks(); + max7219.idle_tasks(); #endif lcd_update(); @@ -14407,7 +15052,7 @@ void stop() { void setup() { #if ENABLED(MAX7219_DEBUG) - Max7219_init(); + max7219.init(); #endif #if ENABLED(DISABLE_JTAG) @@ -14433,10 +15078,10 @@ void setup() { SERIAL_ECHO_START(); // Prepare communication for TMC drivers - #if ENABLED(HAVE_TMC2130) + #if HAS_DRIVER(TMC2130) tmc_init_cs_pins(); #endif - #if ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2208) tmc2208_serial_begin(); #endif @@ -14465,7 +15110,7 @@ void setup() { SERIAL_ECHO_START(); SERIAL_ECHOPAIR(MSG_FREE_MEMORY, freeMemory()); - SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, (int)sizeof(block_t)*BLOCK_BUFFER_SIZE); + SERIAL_ECHOLNPAIR(MSG_PLANNER_BUFFER_BYTES, int(sizeof(block_t))*(BLOCK_BUFFER_SIZE)); // Send "ok" after commands by default for (int8_t i = 0; i < BUFSIZE; i++) send_ok[i] = true; @@ -14602,7 +15247,6 @@ void setup() { #if ENABLED(BLTOUCH) // Make sure any BLTouch error condition is cleared bltouch_command(BLTOUCH_RESET); - set_bltouch_deployed(true); set_bltouch_deployed(false); #endif @@ -14640,6 +15284,17 @@ void setup() { #if ENABLED(USE_WATCHDOG) watchdog_init(); #endif + + #if ENABLED(HANGPRINTER) + enable_A(); + enable_B(); + enable_C(); + enable_D(); + #endif + + #if ENABLED(SDSUPPORT) && DISABLED(ULTRA_LCD) + card.beginautostart(); + #endif } /** @@ -14659,27 +15314,24 @@ void loop() { card.checkautostart(); - #if ENABLED(ULTIPANEL) - if (abort_sd_printing) { - abort_sd_printing = false; - card.stopSDPrint( - #if SD_RESORT - true - #endif - ); - clear_command_queue(); - quickstop_stepper(); - print_job_timer.stop(); - thermalManager.disable_all_heaters(); - #if FAN_COUNT > 0 - for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + if (card.abort_sd_printing) { + card.stopSDPrint( + #if SD_RESORT + true #endif - wait_for_heatup = false; - #if ENABLED(POWER_LOSS_RECOVERY) - card.removeJobRecoveryFile(); - #endif - } - #endif + ); + clear_command_queue(); + quickstop_stepper(); + print_job_timer.stop(); + thermalManager.disable_all_heaters(); + #if FAN_COUNT > 0 + for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0; + #endif + wait_for_heatup = false; + #if ENABLED(POWER_LOSS_RECOVERY) + card.removeJobRecoveryFile(); + #endif + } #endif // SDSUPPORT @@ -14735,6 +15387,6 @@ void loop() { if (++cmd_queue_index_r >= BUFSIZE) cmd_queue_index_r = 0; } } - endstops.report_state(); + endstops.event_handler(); idle(); } diff --git a/Marlin/Max7219_Debug_LEDs.cpp b/Marlin/Max7219_Debug_LEDs.cpp index eba1ffcd27..2be4bfd4f1 100644 --- a/Marlin/Max7219_Debug_LEDs.cpp +++ b/Marlin/Max7219_Debug_LEDs.cpp @@ -31,7 +31,7 @@ * #define MAX7219_DIN_PIN 78 * #define MAX7219_LOAD_PIN 79 * - * Max7219_init() is called automatically at startup, and then there are a number of + * send() is called automatically at startup, and then there are a number of * support functions available to control the LEDs in the 8x8 grid. */ @@ -48,44 +48,92 @@ #include "Marlin.h" #include "delay.h" -static uint8_t LEDs[8] = { 0 }; +Max7219 max7219; -#ifndef MAX7219_ROTATE - #define MAX7219_ROTATE 0 -#endif -#define _ROT ((MAX7219_ROTATE + 360) % 360) -#if _ROT == 0 - #define _ROW_ y - #define _COL_ x - #define XOR_7219(x, y) LEDs[y] ^= _BV(7 - x) - #define BIT_7219(x, y) TEST(LEDs[y], 7 - x) - #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) -#elif _ROT == 90 - #define _ROW_ x - #define _COL_ y - #define XOR_7219(x, y) LEDs[x] ^= _BV(y) - #define BIT_7219(x, y) TEST(LEDs[x], y) - #define SEND_7219(R,V) Max7219(max7219_reg_digit0 + R, V) -#elif _ROT == 180 - #define _ROW_ y - #define _COL_ x - #define XOR_7219(x, y) LEDs[y] ^= _BV(x) - #define BIT_7219(x, y) TEST(LEDs[y], x) - #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) -#elif _ROT == 270 - #define _ROW_ x - #define _COL_ y - #define XOR_7219(x, y) LEDs[x] ^= _BV(7 - y) - #define BIT_7219(x, y) TEST(LEDs[x], 7 - y) - #define SEND_7219(R,V) Max7219(max7219_reg_digit7 - R, V) +uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 }; + +#define LINE_REG(Q) (max7219_reg_digit0 + ((Q) & 0x7)) +#if _ROT == 0 || _ROT == 270 + #define _LED_BIT(Q) (7 - ((Q) & 0x7)) + #define _LED_UNIT(Q) ((Q) & ~0x7) #else - #error "MAX7219_ROTATE must be a multiple of +/- 90°." + #define _LED_BIT(Q) ((Q) & 0x7) + #define _LED_UNIT(Q) ((MAX7219_NUMBER_UNITS - 1 - ((Q) >> 3)) << 3) +#endif +#if _ROT < 180 + #define _LED_IND(P,Q) (_LED_UNIT(P) + (Q)) +#else + #define _LED_IND(P,Q) (_LED_UNIT(P) + (7 - ((Q) & 0x7))) +#endif +#if _ROT == 0 || _ROT == 180 + #define LED_IND(X,Y) _LED_IND(X,Y) + #define LED_BIT(X,Y) _LED_BIT(X) +#elif _ROT == 90 || _ROT == 270 + #define LED_IND(X,Y) _LED_IND(Y,X) + #define LED_BIT(X,Y) _LED_BIT(Y) +#endif +#define XOR_7219(X,Y) do{ led_line[LED_IND(X,Y)] ^= _BV(LED_BIT(X,Y)); }while(0) +#define SET_7219(X,Y) do{ led_line[LED_IND(X,Y)] |= _BV(LED_BIT(X,Y)); }while(0) +#define CLR_7219(X,Y) do{ led_line[LED_IND(X,Y)] &= ~_BV(LED_BIT(X,Y)); }while(0) +#define BIT_7219(X,Y) TEST(led_line[LED_IND(X,Y)], LED_BIT(X,Y)) + +#ifdef CPU_32_BIT + #define SIG_DELAY() DELAY_US(1) // Approximate a 1µs delay on 32-bit ARM + #undef CRITICAL_SECTION_START + #undef CRITICAL_SECTION_END + #define CRITICAL_SECTION_START NOOP + #define CRITICAL_SECTION_END NOOP +#else + #define SIG_DELAY() DELAY_NS(188) // Delay for 0.1875µs (16MHz AVR) or 0.15µs (20MHz AVR) #endif -// Delay for 0.1875µs (16MHz AVR) or 0.15µs (20MHz AVR) -#define SIG_DELAY() DELAY_NS(188) +void Max7219::error(const char * const func, const int32_t v1, const int32_t v2/*=-1*/) { + #if ENABLED(MAX7219_ERRORS) + SERIAL_ECHOPGM("??? Max7219::"); + serialprintPGM(func); + SERIAL_CHAR('('); + SERIAL_ECHO(v1); + if (v2 > 0) SERIAL_ECHOPAIR(", ", v2); + SERIAL_CHAR(')'); + SERIAL_EOL(); + #else + UNUSED(func); UNUSED(v1); UNUSED(v2); + #endif +} -void Max7219_PutByte(uint8_t data) { +/** + * Flip the lowest n_bytes of the supplied bits: + * flipped(x, 1) flips the low 8 bits of x. + * flipped(x, 2) flips the low 16 bits of x. + * flipped(x, 3) flips the low 24 bits of x. + * flipped(x, 4) flips the low 32 bits of x. + */ +inline uint32_t flipped(const uint32_t bits, const uint8_t n_bytes) { + uint32_t mask = 1, outbits = 0; + for (uint8_t b = 0; b < n_bytes * 8; b++) { + outbits <<= 1; + if (bits & mask) outbits |= 1; + mask <<= 1; + } + return outbits; +} + +void Max7219::noop() { + CRITICAL_SECTION_START; + SIG_DELAY(); + WRITE(MAX7219_DIN_PIN, LOW); + for (uint8_t i = 16; i--;) { + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, LOW); + SIG_DELAY(); + SIG_DELAY(); + WRITE(MAX7219_CLK_PIN, HIGH); + SIG_DELAY(); + } + CRITICAL_SECTION_END; +} + +void Max7219::putbyte(uint8_t data) { CRITICAL_SECTION_START; for (uint8_t i = 8; i--;) { SIG_DELAY(); @@ -100,26 +148,47 @@ void Max7219_PutByte(uint8_t data) { CRITICAL_SECTION_END; } -void Max7219(const uint8_t reg, const uint8_t data) { +void Max7219::pulse_load() { SIG_DELAY(); - CRITICAL_SECTION_START; - WRITE(MAX7219_LOAD_PIN, LOW); // begin - SIG_DELAY(); - Max7219_PutByte(reg); // specify register - SIG_DELAY(); - Max7219_PutByte(data); // put data - SIG_DELAY(); - WRITE(MAX7219_LOAD_PIN, LOW); // and tell the chip to load the data + WRITE(MAX7219_LOAD_PIN, LOW); // tell the chip to load the data SIG_DELAY(); WRITE(MAX7219_LOAD_PIN, HIGH); - CRITICAL_SECTION_END; SIG_DELAY(); } +void Max7219::send(const uint8_t reg, const uint8_t data) { + SIG_DELAY(); + CRITICAL_SECTION_START; + SIG_DELAY(); + putbyte(reg); // specify register + SIG_DELAY(); + putbyte(data); // put data + CRITICAL_SECTION_END; +} + +// Send out a single native row of bits to all units +void Max7219::refresh_line(const uint8_t line) { + for (uint8_t u = MAX7219_NUMBER_UNITS; u--;) + send(LINE_REG(line), led_line[(u << 3) | (line & 0x7)]); + pulse_load(); +} + +// Send out a single native row of bits to just one unit +void Max7219::refresh_unit_line(const uint8_t line) { + for (uint8_t u = MAX7219_NUMBER_UNITS; u--;) + if (u == (line >> 3)) send(LINE_REG(line), led_line[line]); else noop(); + pulse_load(); +} + +void Max7219::set(const uint8_t line, const uint8_t bits) { + led_line[line] = bits; + refresh_line(line); +} + #if ENABLED(MAX7219_NUMERIC) // Draw an integer with optional leading zeros and optional decimal point - void Max7219_Print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) { + void Max7219::print(const uint8_t start, int16_t value, uint8_t size, const bool leadzero=false, bool dec=false) { constexpr uint8_t led_numeral[10] = { 0x7E, 0x60, 0x6D, 0x79, 0x63, 0x5B, 0x5F, 0x70, 0x7F, 0x7A }, led_decimal = 0x80, led_minus = 0x01; @@ -128,10 +197,11 @@ void Max7219(const uint8_t reg, const uint8_t data) { while (size--) { const bool minus = neg && blank; if (minus) neg = false; - Max7219( + send( max7219_reg_digit0 + start + size, minus ? led_minus : blank ? 0x00 : led_numeral[value % 10] | (dec ? led_decimal : 0x00) ); + pulse_load(); // tell the chips to load the clocked out data value /= 10; if (!value && !leadzero) blank = true; dec = false; @@ -139,175 +209,210 @@ void Max7219(const uint8_t reg, const uint8_t data) { } // Draw a float with a decimal point and optional digits - void Max7219_Print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) { - if (pre_size) Max7219_Print(start, value, pre_size, leadzero, !!post_size); + void Max7219::print(const uint8_t start, const float value, const uint8_t pre_size, const uint8_t post_size, const bool leadzero=false) { + if (pre_size) print(start, value, pre_size, leadzero, !!post_size); if (post_size) { const int16_t after = ABS(value) * (10 ^ post_size); - Max7219_Print(start + pre_size, after, post_size, true); + print(start + pre_size, after, post_size, true); } } #endif // MAX7219_NUMERIC -inline void Max7219_Error(const char * const func, const int32_t v1, const int32_t v2=-1) { - #if ENABLED(MAX7219_ERRORS) - SERIAL_ECHOPGM("??? "); - serialprintPGM(func); - SERIAL_CHAR('('); - SERIAL_ECHO(v1); - if (v2 > 0) SERIAL_ECHOPAIR(", ", v2); - SERIAL_CHAR(')'); - SERIAL_EOL(); - #else - UNUSED(func); UNUSED(v1); UNUSED(v2); - #endif -} - -inline uint8_t flipped(const uint8_t bits) { - uint8_t outbits = 0; - for (uint8_t b = 0; b < 8; b++) - if (bits & _BV(b)) outbits |= _BV(7 - b); - return outbits; -} - // Modify a single LED bit and send the changed line -void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Set"), x, y); +void Max7219::led_set(const uint8_t x, const uint8_t y, const bool on) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_set"), x, y); if (BIT_7219(x, y) == on) return; XOR_7219(x, y); - SEND_7219(_ROW_, LEDs[_ROW_]); + refresh_line(LED_IND(x, y)); } -void Max7219_LED_On(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_On"), x, y); - Max7219_LED_Set(x, y, true); +void Max7219::led_on(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_on"), x, y); + led_set(x, y, true); } -void Max7219_LED_Off(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Off"), x, y); - Max7219_LED_Set(x, y, false); +void Max7219::led_off(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_off"), x, y); + led_set(x, y, false); } -void Max7219_LED_Toggle(const uint8_t x, const uint8_t y) { - if (x > 7 || y > 7) return Max7219_Error(PSTR("Max7219_LED_Toggle"), x, y); - Max7219_LED_Set(x, y, !BIT_7219(x, y)); +void Max7219::led_toggle(const uint8_t x, const uint8_t y) { + if (x > MAX7219_X_LEDS - 1 || y > MAX7219_Y_LEDS - 1) return error(PSTR("led_toggle"), x, y); + led_set(x, y, !BIT_7219(x, y)); } -inline void _Max7219_Set_Reg(const uint8_t reg, const uint8_t val) { - LEDs[reg] = val; - SEND_7219(reg, val); -} - -void Max7219_Set_Row(const uint8_t _ROW_, const uint8_t val) { - if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Set_Row"), _ROW_); - #if _ROT == 90 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(7 - _COL_, _ROW_, TEST(val, _COL_)); - #elif _ROT == 180 - _Max7219_Set_Reg(_ROW_, flipped(val)); - #elif _ROT == 270 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _COL_)); +void Max7219::send_row(const uint8_t row) { + #if _ROT == 0 || _ROT == 180 + refresh_line(LED_IND(0, row)); #else - _Max7219_Set_Reg(_ROW_, val); + UNUSED(row); + refresh(); #endif } -void Max7219_Clear_Row(const uint8_t _ROW_) { - if (_ROW_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Row"), _ROW_); +void Max7219::send_column(const uint8_t col) { #if _ROT == 90 || _ROT == 270 - for (uint8_t _COL_ = 0; _COL_ <= 7; _COL_++) Max7219_LED_Off(_COL_, _ROW_); + refresh_line(LED_IND(col, 0)); #else - _Max7219_Set_Reg(_ROW_, 0); + UNUSED(col); + refresh(); #endif } -void Max7219_Set_Column(const uint8_t _COL_, const uint8_t val) { - if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Set_Column"), _COL_); - #if _ROT == 90 - _Max7219_Set_Reg(_COL_, val); - #elif _ROT == 180 - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); - #elif _ROT == 270 - _Max7219_Set_Reg(_COL_, flipped(val)); - #else - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Set(_COL_, _ROW_, TEST(val, _ROW_)); +void Max7219::clear() { + ZERO(led_line); + refresh(); +} + +void Max7219::fill() { + memset(led_line, 0xFF, sizeof(led_line)); + refresh(); +} + +void Max7219::clear_row(const uint8_t row) { + if (row >= MAX7219_Y_LEDS) return error(PSTR("clear_row"), row); + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) CLR_7219(x, row); + send_row(row); +} + +void Max7219::clear_column(const uint8_t col) { + if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col); + for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) CLR_7219(col, y); + send_column(col); +} + +/** + * Plot the low order bits of val to the specified row of the matrix. + * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with + * one call to the function (if rotated 90° or 180°). + */ +void Max7219::set_row(const uint8_t row, const uint32_t val) { + if (row >= MAX7219_Y_LEDS) return error(PSTR("set_row"), row); + uint32_t mask = _BV32(MAX7219_X_LEDS - 1); + for (uint8_t x = 0; x < MAX7219_X_LEDS; x++) { + if (val & mask) SET_7219(x, row); else CLR_7219(x, row); + mask >>= 1; + } + send_row(row); +} + +/** + * Plot the low order bits of val to the specified column of the matrix. + * With 4 Max7219 units in the chain, it's possible to set 32 bits at once with + * one call to the function (if rotated 90° or 180°). + */ +void Max7219::set_column(const uint8_t col, const uint32_t val) { + if (col >= MAX7219_X_LEDS) return error(PSTR("set_column"), col); + uint32_t mask = _BV32(MAX7219_Y_LEDS - 1); + for (uint8_t y = 0; y < MAX7219_Y_LEDS; y++) { + if (val & mask) SET_7219(col, y); else CLR_7219(col, y); + mask >>= 1; + } + send_column(col); +} + +void Max7219::set_rows_16bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_16bits"), y, val); + set_row(y + 1, val); val >>= 8; + set_row(y + 0, val); + #else // at least 16 bits on each row + if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_16bits"), y, val); + set_row(y, val); #endif } -void Max7219_Clear_Column(const uint8_t _COL_) { - if (_COL_ > 7) return Max7219_Error(PSTR("Max7219_Clear_Column"), _COL_); - #if _ROT == 90 || _ROT == 270 - _Max7219_Set_Reg(_COL_, 0); - #else - for (uint8_t _ROW_ = 0; _ROW_ <= 7; _ROW_++) Max7219_LED_Off(_COL_, _ROW_); +void Max7219::set_rows_32bits(const uint8_t y, uint32_t val) { + #if MAX7219_X_LEDS == 8 + if (y > MAX7219_Y_LEDS - 4) return error(PSTR("set_rows_32bits"), y, val); + set_row(y + 3, val); val >>= 8; + set_row(y + 2, val); val >>= 8; + set_row(y + 1, val); val >>= 8; + set_row(y + 0, val); + #elif MAX7219_X_LEDS == 16 + if (y > MAX7219_Y_LEDS - 2) return error(PSTR("set_rows_32bits"), y, val); + set_row(y + 1, val); val >>= 16; + set_row(y + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (y > MAX7219_Y_LEDS - 1) return error(PSTR("set_rows_32bits"), y, val); + set_row(y, val); #endif } -void Max7219_Clear() { - for (uint8_t r = 0; r < 8; r++) _Max7219_Set_Reg(r, 0); +void Max7219::set_columns_16bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_columns_16bits"), x, val); + set_column(x + 0, val); val >>= 8; + set_column(x + 1, val); + #else // at least 16 bits in each column + if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_columns_16bits"), x, val); + set_column(x, val); + #endif } -void Max7219_Set_2_Rows(const uint8_t y, uint16_t val) { - if (y > 6) return Max7219_Error(PSTR("Max7219_Set_2_Rows"), y, val); - Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 1, val & 0xFF); +void Max7219::set_columns_32bits(const uint8_t x, uint32_t val) { + #if MAX7219_Y_LEDS == 8 + if (x > MAX7219_X_LEDS - 4) return error(PSTR("set_rows_32bits"), x, val); + set_column(x + 3, val); val >>= 8; + set_column(x + 2, val); val >>= 8; + set_column(x + 1, val); val >>= 8; + set_column(x + 0, val); + #elif MAX7219_Y_LEDS == 16 + if (x > MAX7219_X_LEDS - 2) return error(PSTR("set_rows_32bits"), x, val); + set_column(x + 1, val); val >>= 16; + set_column(x + 0, val); + #else // at least 24 bits on each row. In the 3 matrix case, just display the low 24 bits + if (x > MAX7219_X_LEDS - 1) return error(PSTR("set_rows_32bits"), x, val); + set_column(x, val); + #endif } -void Max7219_Set_4_Rows(const uint8_t y, uint32_t val) { - if (y > 4) return Max7219_Error(PSTR("Max7219_Set_4_Rows"), y, val); - Max7219_Set_Row(y + 0, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 1, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 2, val & 0xFF); val >>= 8; - Max7219_Set_Row(y + 3, val & 0xFF); -} +// Initialize the Max7219 +void Max7219::register_setup() { + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_scanLimit, 0x07); + pulse_load(); // tell the chips to load the clocked out data -void Max7219_Set_2_Columns(const uint8_t x, uint16_t val) { - if (x > 6) return Max7219_Error(PSTR("Max7219_Set_2_Columns"), x, val); - Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 1, val & 0xFF); -} + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) + pulse_load(); // tell the chips to load the clocked out data -void Max7219_Set_4_Columns(const uint8_t x, uint32_t val) { - if (x > 4) return Max7219_Error(PSTR("Max7219_Set_4_Columns"), x, val); - Max7219_Set_Column(x + 0, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 1, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 2, val & 0xFF); val >>= 8; - Max7219_Set_Column(x + 3, val & 0xFF); -} + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_shutdown, 0x01); // not in shutdown mode + pulse_load(); // tell the chips to load the clocked out data -void Max7219_register_setup() { - // Initialize the Max7219 - Max7219(max7219_reg_scanLimit, 0x07); - Max7219(max7219_reg_decodeMode, 0x00); // using an led matrix (not digits) - Max7219(max7219_reg_shutdown, 0x01); // not in shutdown mode - Max7219(max7219_reg_displayTest, 0x00); // no display test - Max7219(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set - // range: 0x00 to 0x0F + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_displayTest, 0x00); // no display test + pulse_load(); // tell the chips to load the clocked out data + + for (uint8_t i = 0; i < MAX7219_NUMBER_UNITS; i++) + send(max7219_reg_intensity, 0x01 & 0x0F); // the first 0x0F is the value you can set + // range: 0x00 to 0x0F + pulse_load(); // tell the chips to load the clocked out data } #ifdef MAX7219_INIT_TEST -#if (MAX7219_INIT_TEST + 0) == 2 +#if MAX7219_INIT_TEST == 2 - inline void Max7219_spiral(const bool on, const uint16_t del) { + void Max7219::spiral(const bool on, const uint16_t del) { constexpr int8_t way[] = { 1, 0, 0, 1, -1, 0, 0, -1 }; int8_t px = 0, py = 0, dir = 0; - for (uint8_t i = 64; i--;) { - Max7219_LED_Set(px, py, on); + for (uint8_t i = MAX7219_X_LEDS * MAX7219_Y_LEDS; i--;) { + led_set(px, py, on); delay(del); const int8_t x = px + way[dir], y = py + way[dir + 1]; - if (!WITHIN(x, 0, 7) || !WITHIN(y, 0, 7) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; + if (!WITHIN(x, 0, MAX7219_X_LEDS-1) || !WITHIN(y, 0, MAX7219_Y_LEDS-1) || BIT_7219(x, y) == on) dir = (dir + 2) & 0x7; px += way[dir]; py += way[dir + 1]; } } #else - inline void Max7219_colset(const uint8_t x, const bool on) { - for (uint8_t y = 0; y <= 7; y++) Max7219_LED_Set(x, y, on); - } - inline void Max7219_sweep(const int8_t dir, const uint16_t ms, const bool on) { - uint8_t x = dir > 0 ? 0 : 7; - for (uint8_t i = 8; i--; x += dir) { - Max7219_Set_Column(x, on ? 0xFF : 0x00); + void Max7219::sweep(const int8_t dir, const uint16_t ms, const bool on) { + uint8_t x = dir > 0 ? 0 : MAX7219_X_LEDS-1; + for (uint8_t i = MAX7219_X_LEDS; i--; x += dir) { + set_column(x, on ? 0xFFFFFFFF : 0x00000000); delay(ms); } } @@ -315,32 +420,33 @@ void Max7219_register_setup() { #endif #endif // MAX7219_INIT_TEST -void Max7219_init() { +void Max7219::init() { SET_OUTPUT(MAX7219_DIN_PIN); SET_OUTPUT(MAX7219_CLK_PIN); OUT_WRITE(MAX7219_LOAD_PIN, HIGH); delay(1); - Max7219_register_setup(); + register_setup(); for (uint8_t i = 0; i <= 7; i++) { // Empty registers to turn all LEDs off - LEDs[i] = 0x00; - Max7219(max7219_reg_digit0 + i, 0); + led_line[i] = 0x00; + send(max7219_reg_digit0 + i, 0); + pulse_load(); // tell the chips to load the clocked out data } #ifdef MAX7219_INIT_TEST - #if (MAX7219_INIT_TEST + 0) == 2 - Max7219_spiral(true, 8); + #if MAX7219_INIT_TEST == 2 + spiral(true, 8); delay(150); - Max7219_spiral(false, 8); + spiral(false, 8); #else // Do an aesthetically-pleasing pattern to fully test the Max7219 module and LEDs. // Light up and turn off columns, both forward and backward. - Max7219_sweep(1, 20, true); - Max7219_sweep(1, 20, false); + sweep(1, 20, true); + sweep(1, 20, false); delay(150); - Max7219_sweep(-1, 20, true); - Max7219_sweep(-1, 20, false); + sweep(-1, 20, true); + sweep(-1, 20, false); #endif #endif } @@ -352,26 +458,58 @@ void Max7219_init() { */ // Apply changes to update a marker -inline void Max7219_Mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) { - Max7219_LED_Off(v1 & 0x7, y + (v1 >= 8)); - Max7219_LED_On(v2 & 0x7, y + (v2 >= 8)); +void Max7219::mark16(const uint8_t y, const uint8_t v1, const uint8_t v2) { + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + led_off(v1 & 0x7, y + (v1 >= 8)); + led_on(v2 & 0x7, y + (v2 >= 8)); + #else + led_off(y, v1 & 0xF); // At least 16 LEDs down. Use a single column. + led_on(y, v2 & 0xF); + #endif + #else + led_off(v1 & 0xF, y); // At least 16 LEDs across. Use a single row. + led_on(v2 & 0xF, y); + #endif } // Apply changes to update a tail-to-head range -inline void Max7219_Range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) { - if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) - Max7219_LED_Off(n & 0x7, y + (n >= 8)); - if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) - Max7219_LED_On(n & 0x7, y + (n >= 8)); +void Max7219::range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh) { + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(n & 0x7, y + (n >= 8)); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(n & 0x7, y + (n >= 8)); + #else // The Max7219 Y-Axis has at least 16 LED's. So use a single column + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(y, n & 0xF); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(y, n & 0xF); + #endif + #else // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + if (ot != nt) for (uint8_t n = ot & 0xF; n != (nt & 0xF) && n != (nh & 0xF); n = (n + 1) & 0xF) + led_off(n & 0xF, y); + if (oh != nh) for (uint8_t n = (oh + 1) & 0xF; n != ((nh + 1) & 0xF); n = (n + 1) & 0xF) + led_on(n & 0xF, y); + #endif } // Apply changes to update a quantity -inline void Max7219_Quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) { +void Max7219::quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv) { for (uint8_t i = MIN(nv, ov); i < MAX(nv, ov); i++) - Max7219_LED_Set(i >> 1, y + (i & 1), nv >= ov); + #if MAX7219_X_LEDS == 8 + #if MAX7219_Y_LEDS == 8 + led_set(i >> 1, y + (i & 1), nv >= ov); // single 8x8 LED matrix. Use two lines to get 16 LED's + #else + led_set(y, i, nv >= ov); // The Max7219 Y-Axis has at least 16 LED's. So use a single column + #endif + #else + led_set(i, y, nv >= ov); // LED matrix has at least 16 LED's on the X-Axis. Use single line of LED's + #endif } -void Max7219_idle_tasks() { +void Max7219::idle_tasks() { #define MAX7219_USE_HEAD (defined(MAX7219_DEBUG_PLANNER_HEAD) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) #define MAX7219_USE_TAIL (defined(MAX7219_DEBUG_PLANNER_TAIL) || defined(MAX7219_DEBUG_PLANNER_QUEUE)) #if MAX7219_USE_HEAD || MAX7219_USE_TAIL @@ -402,12 +540,12 @@ void Max7219_idle_tasks() { // corrupted, this will fix it within a couple seconds. if (do_blink && ++refresh_cnt >= refresh_limit) { refresh_cnt = 0; - Max7219_register_setup(); + register_setup(); } #if ENABLED(MAX7219_DEBUG_PRINTER_ALIVE) if (do_blink) { - Max7219_LED_Toggle(7, 7); + led_toggle(MAX7219_X_LEDS - 1, MAX7219_Y_LEDS - 1); next_blink = ms + 1000; } #endif @@ -417,7 +555,7 @@ void Max7219_idle_tasks() { static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF; if (last_head_cnt != head || last_tail_cnt != tail) { - Max7219_Range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head); + range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head); last_head_cnt = head; last_tail_cnt = tail; } @@ -427,7 +565,7 @@ void Max7219_idle_tasks() { #ifdef MAX7219_DEBUG_PLANNER_HEAD static int16_t last_head_cnt = 0x1; if (last_head_cnt != head) { - Max7219_Mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head); + mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head); last_head_cnt = head; } #endif @@ -435,7 +573,7 @@ void Max7219_idle_tasks() { #ifdef MAX7219_DEBUG_PLANNER_TAIL static int16_t last_tail_cnt = 0x1; if (last_tail_cnt != tail) { - Max7219_Mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail); + mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail); last_tail_cnt = tail; } #endif @@ -446,7 +584,7 @@ void Max7219_idle_tasks() { static int16_t last_depth = 0; const int16_t current_depth = (head - tail + BLOCK_BUFFER_SIZE) & (BLOCK_BUFFER_SIZE - 1) & 0xF; if (current_depth != last_depth) { - Max7219_Quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth); + quantity16(MAX7219_DEBUG_PLANNER_QUEUE, last_depth, current_depth); last_depth = current_depth; } #endif diff --git a/Marlin/Max7219_Debug_LEDs.h b/Marlin/Max7219_Debug_LEDs.h index f00f231749..3523eef40f 100644 --- a/Marlin/Max7219_Debug_LEDs.h +++ b/Marlin/Max7219_Debug_LEDs.h @@ -31,12 +31,33 @@ * #define MAX7219_DIN_PIN 78 * #define MAX7219_LOAD_PIN 79 * - * Max7219_init() is called automatically at startup, and then there are a number of + * max7219.init() is called automatically at startup, and then there are a number of * support functions available to control the LEDs in the 8x8 grid. + * + * If you are using the Max7219 matrix for firmware debug purposes in time sensitive + * areas of the code, please be aware that the orientation (rotation) of the display can + * affect the speed. The Max7219 can update a single column fairly fast. It is much + * faster to do a Max7219_Set_Column() with a rotation of 90 or 270 degrees than to do + * a Max7219_Set_Row(). The opposite is true for rotations of 0 or 180 degrees. */ +#pragma once -#ifndef __MAX7219_DEBUG_LEDS_H__ -#define __MAX7219_DEBUG_LEDS_H__ +#ifndef MAX7219_ROTATE + #define MAX7219_ROTATE 0 +#endif +#define _ROT ((MAX7219_ROTATE + 360) % 360) + +#define MAX7219_LINES (8 * (MAX7219_NUMBER_UNITS)) + +#if _ROT == 0 || _ROT == 180 + #define MAX7219_Y_LEDS 8 + #define MAX7219_X_LEDS MAX7219_LINES +#elif _ROT == 90 || _ROT == 270 + #define MAX7219_X_LEDS 8 + #define MAX7219_Y_LEDS MAX7219_LINES +#else + #error "MAX7219_ROTATE must be a multiple of +/- 90°." +#endif // // MAX7219 registers @@ -57,30 +78,77 @@ #define max7219_reg_shutdown 0x0C #define max7219_reg_displayTest 0x0F -void Max7219_init(); -void Max7219_PutByte(uint8_t data); +class Max7219 { +public: + static uint8_t led_line[MAX7219_LINES]; -// Set a single register (e.g., a whole native row) -void Max7219(const uint8_t reg, const uint8_t data); + Max7219() { } -// Set a single LED by XY coordinate -void Max7219_LED_Set(const uint8_t x, const uint8_t y, const bool on); -void Max7219_LED_On(const uint8_t x, const uint8_t y); -void Max7219_LED_Off(const uint8_t x, const uint8_t y); -void Max7219_LED_Toggle(const uint8_t x, const uint8_t y); + static void init(); + static void register_setup(); + static void putbyte(uint8_t data); + static void pulse_load(); -// Set all 8 LEDs in a single column -void Max7219_Set_Column(const uint8_t col, const uint8_t val); -void Max7219_Clear_Column(const uint8_t col); + // Set a single register (e.g., a whole native row) + static void send(const uint8_t reg, const uint8_t data); -// Set all 8 LEDs in a single row -void Max7219_Set_Row(const uint8_t row, const uint8_t val); -void Max7219_Clear_Row(const uint8_t row); + // Refresh all units + inline static void refresh() { for (uint8_t i = 0; i < 8; i++) refresh_line(i); } -// Quickly clear the whole matrix -void Max7219_Clear(); + // Update a single native line on all units + static void refresh_line(const uint8_t line); -// Apply custom code to update the matrix -void Max7219_idle_tasks(); + // Update a single native line on just one unit + static void refresh_unit_line(const uint8_t line); -#endif // __MAX7219_DEBUG_LEDS_H__ + // Set a single LED by XY coordinate + static void led_set(const uint8_t x, const uint8_t y, const bool on); + static void led_on(const uint8_t x, const uint8_t y); + static void led_off(const uint8_t x, const uint8_t y); + static void led_toggle(const uint8_t x, const uint8_t y); + + // Set all LEDs in a single column + static void set_column(const uint8_t col, const uint32_t val); + static void clear_column(const uint8_t col); + + // Set all LEDs in a single row + static void set_row(const uint8_t row, const uint32_t val); + static void clear_row(const uint8_t row); + + // 16 and 32 bit versions of Row and Column functions + // Multiple rows and columns will be used to display the value if + // the array of matrix LED's is too narrow to accomplish the goal + static void set_rows_16bits(const uint8_t y, uint32_t val); + static void set_rows_32bits(const uint8_t y, uint32_t val); + static void set_columns_16bits(const uint8_t x, uint32_t val); + static void set_columns_32bits(const uint8_t x, uint32_t val); + + // Quickly clear the whole matrix + static void clear(); + + // Quickly fill the whole matrix + static void fill(); + + // Apply custom code to update the matrix + static void idle_tasks(); + +private: + static void error(const char * const func, const int32_t v1, const int32_t v2=-1); + static void noop(); + static void set(const uint8_t line, const uint8_t bits); + static void send_row(const uint8_t row); + static void send_column(const uint8_t col); + static void mark16(const uint8_t y, const uint8_t v1, const uint8_t v2); + static void range16(const uint8_t y, const uint8_t ot, const uint8_t nt, const uint8_t oh, const uint8_t nh); + static void quantity16(const uint8_t y, const uint8_t ov, const uint8_t nv); + + #ifdef MAX7219_INIT_TEST + #if MAX7219_INIT_TEST == 2 + static void spiral(const bool on, const uint16_t del); + #else + static void sweep(const int8_t dir, const uint16_t ms, const bool on); + #endif + #endif +}; + +extern Max7219 max7219; diff --git a/Marlin/SanityCheck.h b/Marlin/SanityCheck.h index 1b9832ebc6..7e745cec39 100644 --- a/Marlin/SanityCheck.h +++ b/Marlin/SanityCheck.h @@ -265,10 +265,28 @@ #elif defined(MEASURED_LOWER_LIMIT) || defined(MEASURED_UPPER_LIMIT) #error "MEASURED_(UPPER|LOWER)_LIMIT is now FILWIDTH_ERROR_MARGIN. Please update your configuration." #elif defined(HAVE_TMCDRIVER) - #error "HAVE_TMCDRIVER is now HAVE_TMC26X. Please update your Configuration_adv.h." + #error "HAVE_TMCDRIVER is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(HAVE_TMC26X) + #error "HAVE_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(HAVE_TMC2130) + #error "HAVE_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." +#elif defined(HAVE_L6470DRIVER) + #error "HAVE_L6470DRIVER is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." #elif defined(X_IS_TMC) || defined(X2_IS_TMC) || defined(Y_IS_TMC) || defined(Y2_IS_TMC) || defined(Z_IS_TMC) || defined(Z2_IS_TMC) \ || defined(E0_IS_TMC) || defined(E1_IS_TMC) || defined(E2_IS_TMC) || defined(E3_IS_TMC) || defined(E4_IS_TMC) - #error "[AXIS]_IS_TMC is now [AXIS]_IS_TMC26X. Please update your Configuration_adv.h." + #error "[AXIS]_IS_TMC is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(X_IS_TMC26X) || defined(X2_IS_TMC26X) || defined(Y_IS_TMC26X) || defined(Y2_IS_TMC26X) || defined(Z_IS_TMC26X) || defined(Z2_IS_TMC26X) \ + || defined(E0_IS_TMC26X) || defined(E1_IS_TMC26X) || defined(E2_IS_TMC26X) || defined(E3_IS_TMC26X) || defined(E4_IS_TMC26X) + #error "[AXIS]_IS_TMC26X is now [AXIS]_DRIVER_TYPE TMC26X. Please update your Configuration.h." +#elif defined(X_IS_TMC2130) || defined(X2_IS_TMC2130) || defined(Y_IS_TMC2130) || defined(Y2_IS_TMC2130) || defined(Z_IS_TMC2130) || defined(Z2_IS_TMC2130) \ + || defined(E0_IS_TMC2130) || defined(E1_IS_TMC2130) || defined(E2_IS_TMC2130) || defined(E3_IS_TMC2130) || defined(E4_IS_TMC2130) + #error "[AXIS]_IS_TMC2130 is now [AXIS]_DRIVER_TYPE TMC2130. Please update your Configuration.h." +#elif defined(X_IS_TMC2208) || defined(X2_IS_TMC2208) || defined(Y_IS_TMC2208) || defined(Y2_IS_TMC2208) || defined(Z_IS_TMC2208) || defined(Z2_IS_TMC2208) \ + || defined(E0_IS_TMC2208) || defined(E1_IS_TMC2208) || defined(E2_IS_TMC2208) || defined(E3_IS_TMC2208) || defined(E4_IS_TMC2208) + #error "[AXIS]_IS_TMC2208 is now [AXIS]_DRIVER_TYPE TMC2208. Please update your Configuration.h." +#elif defined(X_IS_L6470) || defined(X2_IS_L6470) || defined(Y_IS_L6470) || defined(Y2_IS_L6470) || defined(Z_IS_L6470) || defined(Z2_IS_L6470) \ + || defined(E0_IS_L6470) || defined(E1_IS_L6470) || defined(E2_IS_L6470) || defined(E3_IS_L6470) || defined(E4_IS_L6470) + #error "[AXIS]_IS_L6470 is now [AXIS]_DRIVER_TYPE L6470. Please update your Configuration.h." #elif defined(AUTOMATIC_CURRENT_CONTROL) #error "AUTOMATIC_CURRENT_CONTROL is now MONITOR_DRIVER_STATUS. Please update your configuration." #elif defined(FILAMENT_CHANGE_LOAD_LENGTH) @@ -385,10 +403,10 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #if ENABLED(LCD_PROGRESS_BAR) #if DISABLED(SDSUPPORT) && DISABLED(LCD_SET_PROGRESS_MANUALLY) #error "LCD_PROGRESS_BAR requires SDSUPPORT or LCD_SET_PROGRESS_MANUALLY." - #elif DISABLED(ULTRA_LCD) - #error "LCD_PROGRESS_BAR requires a character LCD." #elif ENABLED(DOGLCD) #error "LCD_PROGRESS_BAR does not apply to graphical displays." + #elif DISABLED(ULTIPANEL) + #error "LCD_PROGRESS_BAR requires a character LCD." #elif ENABLED(FILAMENT_LCD_DISPLAY) #error "LCD_PROGRESS_BAR and FILAMENT_LCD_DISPLAY are not fully compatible. Comment out this line to use both." #endif @@ -447,6 +465,8 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #if ENABLED(BABYSTEPPING) #if ENABLED(SCARA) #error "BABYSTEPPING is not implemented for SCARA yet." + #elif ENABLED(HANGPRINTER) + #error "BABYSTEPPING is not implemented for HANGPRINTER." #elif ENABLED(DELTA) && ENABLED(BABYSTEP_XY) #error "BABYSTEPPING only implemented for Z axis on deltabots." #elif ENABLED(BABYSTEP_ZPROBE_OFFSET) && ENABLED(MESH_BED_LEVELING) @@ -509,8 +529,12 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, /** * Individual axis homing is useless for DELTAS */ -#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) && ENABLED(DELTA) - #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." +#if ENABLED(INDIVIDUAL_AXIS_HOMING_MENU) + #if ENABLED(DELTA) + #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with DELTA kinematics." + #elif ENABLED(HANGPRINTER) + #error "INDIVIDUAL_AXIS_HOMING_MENU is incompatible with HANGPRINTER kinematics." + #endif #endif /** @@ -668,6 +692,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, * Allow only one kinematic type to be defined */ #if 1 < 0 \ + + ENABLED(HANGPRINTER) \ + ENABLED(DELTA) \ + ENABLED(MORGAN_SCARA) \ + ENABLED(MAKERARM_SCARA) \ @@ -677,7 +702,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, + ENABLED(COREYX) \ + ENABLED(COREZX) \ + ENABLED(COREZY) - #error "Please enable only one of DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY." + #error "Please enable only one of HANGPRINTER, DELTA, MORGAN_SCARA, MAKERARM_SCARA, COREXY, COREYX, COREXZ, COREZX, COREYZ, or COREZY." #endif /** @@ -699,6 +724,42 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif #endif +/** + * Hangprinter requirements + */ +#if ENABLED(HANGPRINTER) + #if EXTRUDERS > 4 + #error "Marlin supports a maximum of 4 EXTRUDERS when driving a Hangprinter." + #elif ENABLED(CONVENTIONAL_GEOMETRY) + #if ANCHOR_A_Y > 0 + #error "ANCHOR_A_Y should be negative by convention." + #elif (ANCHOR_B_X) * (ANCHOR_C_X) > 0 + #error "ANCHOR_B_X and ANCHOR_C_X should have opposite signs by convention." + #elif ANCHOR_B_Y < 0 + #error "ANCHOR_B_Y should be positive by convention." + #elif ANCHOR_C_Y < 0 + #error "ANCHOR_C_Y should be positive by convention." + #elif ANCHOR_A_Z > 0 + #error "ANCHOR_A_Z should be negative by convention." + #elif ANCHOR_B_Z > 0 + #error "ANCHOR_B_Z should be negative by convention." + #elif ANCHOR_C_Z > 0 + #error "ANCHOR_C_Z should be negative by convention." + #elif ANCHOR_D_Z < 0 + #error "ANCHOR_D_Z should be positive by convention." + #endif + #endif +#elif ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + #error "LINE_BUILDUP_COMPENSATION_FEATURE is only compatible with HANGPRINTER." +#endif + +/** + * Mechaduino requirements + */ +#if ENABLED(MECHADUINO_I2C_COMMANDS) && DISABLED(EXPERIMENTAL_I2CBUS) + #error "MECHADUINO_I2C_COMMANDS requires EXPERIMENTAL_I2CBUS to be enabled." +#endif + /** * Probes */ @@ -743,6 +804,14 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #if HAS_Z_SERVO_PROBE #ifndef NUM_SERVOS #error "You must set NUM_SERVOS for a Z servo probe (Z_PROBE_SERVO_NR)." + #elif Z_PROBE_SERVO_NR == 0 && !PIN_EXISTS(SERVO0) + #error "SERVO0_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 1 && !PIN_EXISTS(SERVO1) + #error "SERVO1_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 2 && !PIN_EXISTS(SERVO2) + #error "SERVO2_PIN must be defined for your servo or BLTOUCH probe." + #elif Z_PROBE_SERVO_NR == 3 && !PIN_EXISTS(SERVO3) + #error "SERVO3_PIN must be defined for your servo or BLTOUCH probe." #elif Z_PROBE_SERVO_NR >= NUM_SERVOS #error "Z_PROBE_SERVO_NR must be smaller than NUM_SERVOS." #endif @@ -758,7 +827,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires USE_ZMIN_PLUG to be enabled." #elif !HAS_Z_MIN #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires the Z_MIN_PIN to be defined." - #elif ENABLED(Z_MIN_PROBE_ENDSTOP_INVERTING) != ENABLED(Z_MIN_ENDSTOP_INVERTING) + #elif Z_MIN_PROBE_ENDSTOP_INVERTING != Z_MIN_ENDSTOP_INVERTING #error "Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN requires Z_MIN_ENDSTOP_INVERTING to match Z_MIN_PROBE_ENDSTOP_INVERTING." #endif #elif ENABLED(Z_MIN_PROBE_ENDSTOP) @@ -792,6 +861,9 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #error "Z_PROBE_LOW_POINT must be less than or equal to 0." #endif + static_assert(int(X_PROBE_OFFSET_FROM_EXTRUDER) == (X_PROBE_OFFSET_FROM_EXTRUDER), "X_PROBE_OFFSET_FROM_EXTRUDER must be an integer value."); + static_assert(int(Y_PROBE_OFFSET_FROM_EXTRUDER) == (Y_PROBE_OFFSET_FROM_EXTRUDER), "Y_PROBE_OFFSET_FROM_EXTRUDER must be an integer value."); + #else /** @@ -1182,6 +1254,7 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif #endif #endif + /** * Endstop Tests */ @@ -1189,33 +1262,33 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #define _PLUG_UNUSED_TEST(AXIS,PLUG) (DISABLED(USE_##PLUG##MIN_PLUG) && DISABLED(USE_##PLUG##MAX_PLUG) && !(ENABLED(AXIS##_DUAL_ENDSTOPS) && WITHIN(AXIS##2_USE_ENDSTOP, _##PLUG##MAX_, _##PLUG##MIN_))) #define _AXIS_PLUG_UNUSED_TEST(AXIS) (_PLUG_UNUSED_TEST(AXIS,X) && _PLUG_UNUSED_TEST(AXIS,Y) && _PLUG_UNUSED_TEST(AXIS,Z)) -// At least 3 endstop plugs must be used -#if _AXIS_PLUG_UNUSED_TEST(X) - #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG." -#endif -#if _AXIS_PLUG_UNUSED_TEST(Y) - #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG." -#endif -#if _AXIS_PLUG_UNUSED_TEST(Z) - #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG." -#endif - -// Delta and Cartesian use 3 homing endstops -#if !IS_SCARA - #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG) - #error "Enable USE_XMIN_PLUG when homing X to MIN." - #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG) - #error "Enable USE_XMAX_PLUG when homing X to MAX." - #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG) - #error "Enable USE_YMIN_PLUG when homing Y to MIN." - #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG) - #error "Enable USE_YMAX_PLUG when homing Y to MAX." +#if DISABLED(HANGPRINTER) + // At least 3 endstop plugs must be used + #if _AXIS_PLUG_UNUSED_TEST(X) + #error "You must enable USE_XMIN_PLUG or USE_XMAX_PLUG." + #elif _AXIS_PLUG_UNUSED_TEST(Y) + #error "You must enable USE_YMIN_PLUG or USE_YMAX_PLUG." + #elif _AXIS_PLUG_UNUSED_TEST(Z) + #error "You must enable USE_ZMIN_PLUG or USE_ZMAX_PLUG." + #endif + + // Delta and Cartesian use 3 homing endstops + #if !IS_SCARA + #if X_HOME_DIR < 0 && DISABLED(USE_XMIN_PLUG) + #error "Enable USE_XMIN_PLUG when homing X to MIN." + #elif X_HOME_DIR > 0 && DISABLED(USE_XMAX_PLUG) + #error "Enable USE_XMAX_PLUG when homing X to MAX." + #elif Y_HOME_DIR < 0 && DISABLED(USE_YMIN_PLUG) + #error "Enable USE_YMIN_PLUG when homing Y to MIN." + #elif Y_HOME_DIR > 0 && DISABLED(USE_YMAX_PLUG) + #error "Enable USE_YMAX_PLUG when homing Y to MAX." + #endif + #endif + #if Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG) + #error "Enable USE_ZMIN_PLUG when homing Z to MIN." + #elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG) + #error "Enable USE_ZMAX_PLUG when homing Z to MAX." #endif -#endif -#if Z_HOME_DIR < 0 && DISABLED(USE_ZMIN_PLUG) - #error "Enable USE_ZMIN_PLUG when homing Z to MIN." -#elif Z_HOME_DIR > 0 && DISABLED(USE_ZMAX_PLUG) - #error "Enable USE_ZMAX_PLUG when homing Z to MAX." #endif // Dual endstops requirements @@ -1413,246 +1486,95 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif /** - * Make sure HAVE_TMC26X is warranted + * Check existing CS pins against enabled TMC SPI drivers. */ -#if ENABLED(HAVE_TMC26X) && !( \ - ENABLED( X_IS_TMC26X) \ - || ENABLED(X2_IS_TMC26X) \ - || ENABLED( Y_IS_TMC26X) \ - || ENABLED(Y2_IS_TMC26X) \ - || ENABLED( Z_IS_TMC26X) \ - || ENABLED(Z2_IS_TMC26X) \ - || ENABLED(E0_IS_TMC26X) \ - || ENABLED(E1_IS_TMC26X) \ - || ENABLED(E2_IS_TMC26X) \ - || ENABLED(E3_IS_TMC26X) \ - || ENABLED(E4_IS_TMC26X) \ - ) - #error "HAVE_TMC26X requires at least one TMC26X stepper to be set." +#if AXIS_DRIVER_TYPE(X, TMC2130) && !PIN_EXISTS(X_CS) + #error "X_CS_PIN is required for TMC2130. Define X_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(X2, TMC2130) && !PIN_EXISTS(X2_CS) + #error "X2_CS_PIN is required for X2. Define X2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Y, TMC2130) && !PIN_EXISTS(Y_CS) + #error "Y_CS_PIN is required for TMC2130. Define Y_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Y2, TMC2130) && !PIN_EXISTS(Y2_CS) + #error "Y2_CS_PIN is required for TMC2130. Define Y2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Z, TMC2130) && !PIN_EXISTS(Z_CS) + #error "Z_CS_PIN is required for TMC2130. Define Z_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(Z2, TMC2130) && !PIN_EXISTS(Z2_CS) + #error "Z2_CS_PIN is required for TMC2130. Define Z2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E0, TMC2130) && !PIN_EXISTS(E0_CS) + #error "E0_CS_PIN is required for TMC2130. Define E0_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E1, TMC2130) && !PIN_EXISTS(E1_CS) + #error "E1_CS_PIN is required for TMC2130. Define E1_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E2, TMC2130) && !PIN_EXISTS(E2_CS) + #error "E2_CS_PIN is required for TMC2130. Define E2_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E3, TMC2130) && !PIN_EXISTS(E3_CS) + #error "E3_CS_PIN is required for TMC2130. Define E3_CS_PIN in Configuration_adv.h." +#elif AXIS_DRIVER_TYPE(E4, TMC2130) && !PIN_EXISTS(E4_CS) + #error "E4_CS_PIN is required for TMC2130. Define E4_CS_PIN in Configuration_adv.h." #endif /** - * TMC2130 Requirements + * TMC2208 software UART and ENDSTOP_INTERRUPTS both use pin change interrupts (PCI) */ -#if ENABLED(HAVE_TMC2130) - #if !( ENABLED( X_IS_TMC2130) \ - || ENABLED(X2_IS_TMC2130) \ - || ENABLED( Y_IS_TMC2130) \ - || ENABLED(Y2_IS_TMC2130) \ - || ENABLED( Z_IS_TMC2130) \ - || ENABLED(Z2_IS_TMC2130) \ - || ENABLED(E0_IS_TMC2130) \ - || ENABLED(E1_IS_TMC2130) \ - || ENABLED(E2_IS_TMC2130) \ - || ENABLED(E3_IS_TMC2130) \ - || ENABLED(E4_IS_TMC2130) ) - #error "HAVE_TMC2130 requires at least one TMC2130 stepper to be set." - #elif ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) - #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." - #endif - - #if ENABLED(X_IS_TMC2130) && !PIN_EXISTS(X_CS) - #error "X_CS_PIN is required for X_IS_TMC2130. Define X_CS_PIN in Configuration_adv.h." - #elif ENABLED(X2_IS_TMC2130) && !PIN_EXISTS(X2_CS) - #error "X2_CS_PIN is required for X2_IS_TMC2130. Define X2_CS_PIN in Configuration_adv.h." - #elif ENABLED(Y_IS_TMC2130) && !PIN_EXISTS(Y_CS) - #error "Y_CS_PIN is required for Y_IS_TMC2130. Define Y_CS_PIN in Configuration_adv.h." - #elif ENABLED(Y2_IS_TMC2130) && !PIN_EXISTS(Y2_CS) - #error "Y2_CS_PIN is required for Y2_IS_TMC2130. Define Y2_CS_PIN in Configuration_adv.h." - #elif ENABLED(Z_IS_TMC2130) && !PIN_EXISTS(Z_CS) - #error "Z_CS_PIN is required for Z_IS_TMC2130. Define Z_CS_PIN in Configuration_adv.h." - #elif ENABLED(Z2_IS_TMC2130) && !PIN_EXISTS(Z2_CS) - #error "Z2_CS_PIN is required for Z2_IS_TMC2130. Define Z2_CS_PIN in Configuration_adv.h." - #elif ENABLED(E0_IS_TMC2130) && !PIN_EXISTS(E0_CS) - #error "E0_CS_PIN is required for E0_IS_TMC2130. Define E0_CS_PIN in Configuration_adv.h." - #elif ENABLED(E1_IS_TMC2130) && !PIN_EXISTS(E1_CS) - #error "E1_CS_PIN is required for E1_IS_TMC2130. Define E1_CS_PIN in Configuration_adv.h." - #elif ENABLED(E2_IS_TMC2130) && !PIN_EXISTS(E2_CS) - #error "E2_CS_PIN is required for E2_IS_TMC2130. Define E2_CS_PIN in Configuration_adv.h." - #elif ENABLED(E3_IS_TMC2130) && !PIN_EXISTS(E3_CS) - #error "E3_CS_PIN is required for E3_IS_TMC2130. Define E3_CS_PIN in Configuration_adv.h." - #elif ENABLED(E4_IS_TMC2130) && !PIN_EXISTS(E4_CS) - #error "E4_CS_PIN is required for E4_IS_TMC2130. Define E4_CS_PIN in Configuration_adv.h." - #endif - - #if ENABLED(SENSORLESS_HOMING) - // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop - // is necessary in order to reset the stallGuard indication between the initial movement of all three - // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of - // clearing the stallGuard activated status is found. - #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP) - #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP." - #elif X_SENSORLESS && X_HOME_DIR == -1 && (DISABLED(X_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMIN)) - #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN." - #elif X_SENSORLESS && X_HOME_DIR == 1 && (DISABLED(X_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_XMAX)) - #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX." - #elif Y_SENSORLESS && Y_HOME_DIR == -1 && (DISABLED(Y_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMIN)) - #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN." - #elif Y_SENSORLESS && Y_HOME_DIR == 1 && (DISABLED(Y_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_YMAX)) - #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX." - #elif Z_SENSORLESS && Z_HOME_DIR == -1 && (DISABLED(Z_MIN_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMIN)) - #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN." - #elif Z_SENSORLESS && Z_HOME_DIR == 1 && (DISABLED(Z_MAX_ENDSTOP_INVERTING) || DISABLED(ENDSTOPPULLUP_ZMAX)) - #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX." - #elif ENABLED(ENDSTOP_NOISE_FILTER) - #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER." - #endif - #endif - - // Sensorless homing is required for both combined steppers in an H-bot - #if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS - #error "CoreXY requires both X and Y to use sensorless homing if either does." - #elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS - #error "CoreXZ requires both X and Z to use sensorless homing if either does." - #elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS - #error "CoreYZ requires both Y and Z to use sensorless homing if either does." - #endif - -#elif ENABLED(SENSORLESS_HOMING) - - #error "SENSORLESS_HOMING requires TMC2130 stepper drivers." - +#if HAS_DRIVER(TMC2208) && ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && !( \ + defined(X_HARDWARE_SERIAL ) \ + || defined(X2_HARDWARE_SERIAL) \ + || defined(Y_HARDWARE_SERIAL ) \ + || defined(Y2_HARDWARE_SERIAL) \ + || defined(Z_HARDWARE_SERIAL ) \ + || defined(Z2_HARDWARE_SERIAL) \ + || defined(E0_HARDWARE_SERIAL) \ + || defined(E1_HARDWARE_SERIAL) \ + || defined(E2_HARDWARE_SERIAL) \ + || defined(E3_HARDWARE_SERIAL) \ + || defined(E4_HARDWARE_SERIAL) ) + #error "select hardware UART for TMC2208 to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE." #endif -/** - * TMC2208 Requirements - */ -#if ENABLED(HAVE_TMC2208) - #if !( ENABLED( X_IS_TMC2208) \ - || ENABLED(X2_IS_TMC2208) \ - || ENABLED( Y_IS_TMC2208) \ - || ENABLED(Y2_IS_TMC2208) \ - || ENABLED( Z_IS_TMC2208) \ - || ENABLED(Z2_IS_TMC2208) \ - || ENABLED(E0_IS_TMC2208) \ - || ENABLED(E1_IS_TMC2208) \ - || ENABLED(E2_IS_TMC2208) \ - || ENABLED(E3_IS_TMC2208) \ - || ENABLED(E4_IS_TMC2208 ) ) - #error "HAVE_TMC2208 requires at least one TMC2208 stepper to be set." - // Software UART and ENDSTOP_INTERRUPTS both use Pin Change interrupts (PCI) - #elif ENABLED(ENDSTOP_INTERRUPTS_FEATURE) && \ - !( defined( X_HARDWARE_SERIAL) \ - || defined(X2_HARDWARE_SERIAL) \ - || defined( Y_HARDWARE_SERIAL) \ - || defined(Y2_HARDWARE_SERIAL) \ - || defined( Z_HARDWARE_SERIAL) \ - || defined(Z2_HARDWARE_SERIAL) \ - || defined(E0_HARDWARE_SERIAL) \ - || defined(E1_HARDWARE_SERIAL) \ - || defined(E2_HARDWARE_SERIAL) \ - || defined(E3_HARDWARE_SERIAL) \ - || defined(E4_HARDWARE_SERIAL) ) - #error "Select *_HARDWARE_SERIAL to use both TMC2208 and ENDSTOP_INTERRUPTS_FEATURE." +#if ENABLED(SENSORLESS_HOMING) + // Require STEALTHCHOP for SENSORLESS_HOMING on DELTA as the transition from spreadCycle to stealthChop + // is necessary in order to reset the stallGuard indication between the initial movement of all three + // towers to +Z and the individual homing of each tower. This restriction can be removed once a means of + // clearing the stallGuard activated status is found. + #if ENABLED(DELTA) && !ENABLED(STEALTHCHOP) + #error "SENSORLESS_HOMING on DELTA currently requires STEALTHCHOP." + #elif X_SENSORLESS && X_HOME_DIR == -1 && (!X_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMIN)) + #error "SENSORLESS_HOMING requires X_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMIN when homing to X_MIN." + #elif X_SENSORLESS && X_HOME_DIR == 1 && (!X_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_XMAX)) + #error "SENSORLESS_HOMING requires X_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_XMAX when homing to X_MAX." + #elif Y_SENSORLESS && Y_HOME_DIR == -1 && (!Y_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_YMIN)) + #error "SENSORLESS_HOMING requires Y_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMIN when homing to Y_MIN." + #elif Y_SENSORLESS && Y_HOME_DIR == 1 && (!Y_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_YMAX)) + #error "SENSORLESS_HOMING requires Y_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_YMAX when homing to Y_MAX." + #elif Z_SENSORLESS && Z_HOME_DIR == -1 && (!Z_MIN_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_ZMIN)) + #error "SENSORLESS_HOMING requires Z_MIN_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMIN when homing to Z_MIN." + #elif Z_SENSORLESS && Z_HOME_DIR == 1 && (!Z_MAX_ENDSTOP_INVERTING || DISABLED(ENDSTOPPULLUP_ZMAX)) + #error "SENSORLESS_HOMING requires Z_MAX_ENDSTOP_INVERTING and ENDSTOPPULLUP_ZMAX when homing to Z_MAX." + #elif ENABLED(ENDSTOP_NOISE_FILTER) + #error "SENSORLESS_HOMING is incompatible with ENDSTOP_NOISE_FILTER." #endif #endif +// Sensorless homing is required for both combined steppers in an H-bot +#if CORE_IS_XY && X_SENSORLESS != Y_SENSORLESS + #error "CoreXY requires both X and Y to use sensorless homing if either does." +#elif CORE_IS_XZ && X_SENSORLESS != Z_SENSORLESS + #error "CoreXZ requires both X and Z to use sensorless homing if either does." +#elif CORE_IS_YZ && Y_SENSORLESS != Z_SENSORLESS + #error "CoreYZ requires both Y and Z to use sensorless homing if either does." +#endif + #if ENABLED(HYBRID_THRESHOLD) && DISABLED(STEALTHCHOP) #error "Enable STEALTHCHOP to use HYBRID_THRESHOLD." #endif - -#if ENABLED(TMC_Z_CALIBRATION) && !Z_IS_TRINAMIC && !Z2_IS_TRINAMIC +#if ENABLED(TMC_Z_CALIBRATION) && !AXIS_IS_TMC(Z) && !AXIS_IS_TMC(Z2) #error "TMC_Z_CALIBRATION requires at least one TMC driver on Z axis" #endif -/** - * Make sure HAVE_L6470DRIVER is warranted - */ -#if ENABLED(HAVE_L6470DRIVER) && !( \ - ENABLED( X_IS_L6470) \ - || ENABLED(X2_IS_L6470) \ - || ENABLED( Y_IS_L6470) \ - || ENABLED(Y2_IS_L6470) \ - || ENABLED( Z_IS_L6470) \ - || ENABLED(Z2_IS_L6470) \ - || ENABLED(E0_IS_L6470) \ - || ENABLED(E1_IS_L6470) \ - || ENABLED(E2_IS_L6470) \ - || ENABLED(E3_IS_L6470) \ - || ENABLED(E4_IS_L6470) \ - ) - #error "HAVE_L6470DRIVER requires at least one L6470 stepper to be set." +#if ENABLED(SENSORLESS_HOMING) && !HAS_STALLGUARD + #error "SENSORLESS_HOMING requires TMC2130 or TMC2660 stepper drivers." #endif - -/** - * Check that each axis has only one driver selected - */ -#if 1 < 0 \ - + ENABLED(X_IS_TMC26X) \ - + ENABLED(X_IS_TMC2130) \ - + ENABLED(X_IS_TMC2208) \ - + ENABLED(X_IS_L6470) - #error "Please enable only one stepper driver for the X axis." -#endif -#if 1 < 0 \ - + ENABLED(X2_IS_TMC26X) \ - + ENABLED(X2_IS_TMC2130) \ - + ENABLED(X2_IS_TMC2208) \ - + ENABLED(X2_IS_L6470) - #error "Please enable only one stepper driver for the X2 axis." -#endif -#if 1 < 0 \ - + ENABLED(Y_IS_TMC26X) \ - + ENABLED(Y_IS_TMC2130) \ - + ENABLED(Y_IS_TMC2208) \ - + ENABLED(Y_IS_L6470) - #error "Please enable only one stepper driver for the Y axis." -#endif -#if 1 < 0 \ - + ENABLED(Y2_IS_TMC26X) \ - + ENABLED(Y2_IS_TMC2130) \ - + ENABLED(Y2_IS_TMC2208) \ - + ENABLED(Y2_IS_L6470) - #error "Please enable only one stepper driver for the Y2 axis." -#endif -#if 1 < 0 \ - + ENABLED(Z_IS_TMC26X) \ - + ENABLED(Z_IS_TMC2130) \ - + ENABLED(Z_IS_TMC2208) \ - + ENABLED(Z_IS_L6470) - #error "Please enable only one stepper driver for the Z axis." -#endif -#if 1 < 0 \ - + ENABLED(Z2_IS_TMC26X) \ - + ENABLED(Z2_IS_TMC2130) \ - + ENABLED(Z2_IS_TMC2208) \ - + ENABLED(Z2_IS_L6470) - #error "Please enable only one stepper driver for the Z2 axis." -#endif -#if 1 < 0 \ - + ENABLED(E0_IS_TMC26X) \ - + ENABLED(E0_IS_TMC2130) \ - + ENABLED(E0_IS_TMC2208) \ - + ENABLED(E0_IS_L6470) - #error "Please enable only one stepper driver for the E0 axis." -#endif -#if 1 < 0 \ - + ENABLED(E1_IS_TMC26X) \ - + ENABLED(E1_IS_TMC2130) \ - + ENABLED(E1_IS_TMC2208) \ - + ENABLED(E1_IS_L6470) - #error "Please enable only one stepper driver for the E1 axis." -#endif -#if 1 < 0 \ - + ENABLED(E2_IS_TMC26X) \ - + ENABLED(E2_IS_TMC2130) \ - + ENABLED(E2_IS_TMC2208) \ - + ENABLED(E2_IS_L6470) - #error "Please enable only one stepper driver for the E2 axis." -#endif -#if 1 < 0 \ - + ENABLED(E3_IS_TMC26X) \ - + ENABLED(E3_IS_TMC2130) \ - + ENABLED(E3_IS_TMC2208) \ - + ENABLED(E3_IS_L6470) - #error "Please enable only one stepper driver for the E3 axis." -#endif -#if 1 < 0 \ - + ENABLED(E4_IS_TMC26X) \ - + ENABLED(E4_IS_TMC2130) \ - + ENABLED(E4_IS_TMC2208) \ - + ENABLED(E4_IS_L6470) - #error "Please enable only one stepper driver for the E4 axis." +#if ENABLED(STEALTHCHOP) && !HAS_STEALTHCHOP + #error "STEALTHCHOP requires TMC2130 or TMC2208 stepper drivers." #endif /** @@ -1666,17 +1588,24 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE, #endif /** - * Require 4 or more elements in per-axis initializers + * Require 5/4 or more elements in per-axis initializers */ +#if ENABLED(HANGPRINTER) + #define MIN_ELEMENTS "5" +#else + #define MIN_ELEMENTS "4" +#endif + constexpr float sanity_arr_1[] = DEFAULT_AXIS_STEPS_PER_UNIT, sanity_arr_2[] = DEFAULT_MAX_FEEDRATE, sanity_arr_3[] = DEFAULT_MAX_ACCELERATION; -static_assert(COUNT(sanity_arr_1) >= XYZE, "DEFAULT_AXIS_STEPS_PER_UNIT requires 4 (or more) elements."); -static_assert(COUNT(sanity_arr_2) >= XYZE, "DEFAULT_MAX_FEEDRATE requires 4 (or more) elements."); -static_assert(COUNT(sanity_arr_3) >= XYZE, "DEFAULT_MAX_ACCELERATION requires 4 (or more) elements."); -static_assert(COUNT(sanity_arr_1) <= XYZE_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements."); -static_assert(COUNT(sanity_arr_2) <= XYZE_N, "DEFAULT_MAX_FEEDRATE has too many elements."); -static_assert(COUNT(sanity_arr_3) <= XYZE_N, "DEFAULT_MAX_ACCELERATION has too many elements."); + +static_assert(COUNT(sanity_arr_1) >= NUM_AXIS, "DEFAULT_AXIS_STEPS_PER_UNIT requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_2) >= NUM_AXIS, "DEFAULT_MAX_FEEDRATE requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_3) >= NUM_AXIS, "DEFAULT_MAX_ACCELERATION requires " MIN_ELEMENTS " (or more) elements for HANGPRINTER."); +static_assert(COUNT(sanity_arr_1) <= NUM_AXIS_N, "DEFAULT_AXIS_STEPS_PER_UNIT has too many elements."); +static_assert(COUNT(sanity_arr_2) <= NUM_AXIS_N, "DEFAULT_MAX_FEEDRATE has too many elements."); +static_assert(COUNT(sanity_arr_3) <= NUM_AXIS_N, "DEFAULT_MAX_ACCELERATION has too many elements."); /** * Sanity checks for Spindle / Laser diff --git a/Marlin/Sd2Card.cpp b/Marlin/Sd2Card.cpp index ab3fc2f370..118b83cd9d 100644 --- a/Marlin/Sd2Card.cpp +++ b/Marlin/Sd2Card.cpp @@ -399,7 +399,7 @@ bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) { #if ENABLED(SD_CHECK_AND_RETRY) uint8_t retryCnt = 3; - for(;;) { + for (;;) { if (cardCommand(CMD17, blockNumber)) error(SD_CARD_ERROR_CMD17); else if (readData(dst, 512)) diff --git a/Marlin/Version.h b/Marlin/Version.h index d151303ea9..bf63db1650 100644 --- a/Marlin/Version.h +++ b/Marlin/Version.h @@ -35,7 +35,7 @@ /** * Marlin release version identifier */ - #define SHORT_BUILD_VERSION "TM3D-1.1.8_M2" + #define SHORT_BUILD_VERSION "TM3D-1.1.9_M3" /** * Verbose version identifier which should contain a reference to the location @@ -48,7 +48,7 @@ * here we define this default string as the date where the latest release * version was tagged. */ - #define STRING_DISTRIBUTION_DATE "2018-07-07" + #define STRING_DISTRIBUTION_DATE "2018-11-07" /** * Required minimum Configuration.h and Configuration_adv.h file versions. @@ -57,8 +57,8 @@ * but not limited to: ADD, DELETE RENAME OR REPURPOSE any directive/option on * the configuration files. */ - #define REQUIRED_CONFIGURATION_H_VERSION 010107 - #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010107 + #define REQUIRED_CONFIGURATION_H_VERSION 010109 + #define REQUIRED_CONFIGURATION_ADV_H_VERSION 010109 /** * The protocol for communication to the host. Protocol indicates communication @@ -78,7 +78,7 @@ * has a distinct Github fork— the Source Code URL should just be the main * Marlin repository. */ - #define SOURCE_CODE_URL "https://github.com/MarlinFirmware/Marlin" + #define SOURCE_CODE_URL "tinymachines3d.com" /** * Default generic printer UUID. @@ -89,6 +89,6 @@ * The WEBSITE_URL is the location where users can get more information such as * documentation about a specific Marlin release. */ - #define WEBSITE_URL "http://marlinfw.org" + #define WEBSITE_URL "tinymachines3d.com" #endif // USE_AUTOMATIC_VERSIONING diff --git a/Marlin/cardreader.cpp b/Marlin/cardreader.cpp index 5c4ff5e7d0..082da72378 100644 --- a/Marlin/cardreader.cpp +++ b/Marlin/cardreader.cpp @@ -35,8 +35,6 @@ #include "power_loss_recovery.h" #endif -#define LONGEST_FILENAME (longFilename[0] ? longFilename : filename) - CardReader::CardReader() { #if ENABLED(SDCARD_SORT_ALPHA) sort_count = 0; @@ -317,7 +315,7 @@ void CardReader::stopSDPrint( #if ENABLED(ADVANCED_PAUSE_FEATURE) did_pause_print = 0; #endif - sdprinting = false; + sdprinting = abort_sd_printing = false; if (isFileOpen()) file.close(); #if SD_RESORT if (re_sort) presort(); @@ -731,7 +729,7 @@ void CardReader::setroot() { getfilename(i); #if ENABLED(SDSORT_DYNAMIC_RAM) // Use dynamic method to copy long filename - sortnames[i] = strdup(LONGEST_FILENAME); + sortnames[i] = strdup(longest_filename()); #if ENABLED(SDSORT_CACHE_NAMES) // When caching also store the short name, since // we're replacing the getfilename() behavior. @@ -740,10 +738,10 @@ void CardReader::setroot() { #else // Copy filenames into the static array #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH - strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN); + strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN); sortnames[i][SORTED_LONGNAME_MAXLEN - 1] = '\0'; #else - strncpy(sortnames[i], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN); + strncpy(sortnames[i], longest_filename(), SORTED_LONGNAME_MAXLEN); #endif #if ENABLED(SDSORT_CACHE_NAMES) strcpy(sortshort[i], filename); @@ -791,12 +789,12 @@ void CardReader::setroot() { // throughout the loop. Slow if there are many. #if DISABLED(SDSORT_USES_RAM) getfilename(o1); - strcpy(name1, LONGEST_FILENAME); // save (or getfilename below will trounce it) + strcpy(name1, longest_filename()); // save (or getfilename below will trounce it) #if HAS_FOLDER_SORTING bool dir1 = filenameIsDir; #endif getfilename(o2); - char *name2 = LONGEST_FILENAME; // use the string in-place + char *name2 = longest_filename(); // use the string in-place #endif // !SDSORT_USES_RAM // Sort the current pair according to settings. @@ -834,7 +832,7 @@ void CardReader::setroot() { getfilename(0); #if ENABLED(SDSORT_DYNAMIC_RAM) sortnames = new char*[1]; - sortnames[0] = strdup(LONGEST_FILENAME); // malloc + sortnames[0] = strdup(longest_filename()); // malloc #if ENABLED(SDSORT_CACHE_NAMES) sortshort = new char*[1]; sortshort[0] = strdup(filename); // malloc @@ -842,10 +840,10 @@ void CardReader::setroot() { isDir = new uint8_t[1]; #else #if SORTED_LONGNAME_MAXLEN != LONG_FILENAME_LENGTH - strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN); + strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN); sortnames[0][SORTED_LONGNAME_MAXLEN - 1] = '\0'; #else - strncpy(sortnames[0], LONGEST_FILENAME, SORTED_LONGNAME_MAXLEN); + strncpy(sortnames[0], longest_filename(), SORTED_LONGNAME_MAXLEN); #endif #if ENABLED(SDSORT_CACHE_NAMES) strcpy(sortshort[0], filename); diff --git a/Marlin/cardreader.h b/Marlin/cardreader.h index 15275c0729..c04347091e 100644 --- a/Marlin/cardreader.h +++ b/Marlin/cardreader.h @@ -114,8 +114,10 @@ public: } #endif + FORCE_INLINE char* longest_filename() { return longFilename[0] ? longFilename : filename; } + public: - bool saving, logging, sdprinting, cardOK, filenameIsDir; + bool saving, logging, sdprinting, cardOK, filenameIsDir, abort_sd_printing; char filename[FILENAME_LENGTH], longFilename[LONG_FILENAME_LENGTH]; int8_t autostart_index; private: @@ -204,13 +206,13 @@ private: #if PIN_EXISTS(SD_DETECT) #if ENABLED(SD_DETECT_INVERTED) - #define IS_SD_INSERTED (READ(SD_DETECT_PIN) == HIGH) + #define IS_SD_INSERTED() READ(SD_DETECT_PIN) #else - #define IS_SD_INSERTED (READ(SD_DETECT_PIN) == LOW) + #define IS_SD_INSERTED() !READ(SD_DETECT_PIN) #endif #else // No card detect line? Assume the card is inserted. - #define IS_SD_INSERTED true + #define IS_SD_INSERTED() true #endif extern CardReader card; @@ -218,11 +220,11 @@ extern CardReader card; #endif // SDSUPPORT #if ENABLED(SDSUPPORT) - #define IS_SD_PRINTING (card.sdprinting) - #define IS_SD_FILE_OPEN (card.isFileOpen()) + #define IS_SD_PRINTING() card.sdprinting + #define IS_SD_FILE_OPEN() card.isFileOpen() #else - #define IS_SD_PRINTING (false) - #define IS_SD_FILE_OPEN (false) + #define IS_SD_PRINTING() false + #define IS_SD_FILE_OPEN() false #endif #endif // _CARDREADER_H_ diff --git a/Marlin/configuration_store.cpp b/Marlin/configuration_store.cpp index 57d9de0e92..6ec8f53e43 100644 --- a/Marlin/configuration_store.cpp +++ b/Marlin/configuration_store.cpp @@ -95,19 +95,19 @@ typedef struct SettingsDataStruct { // // DISTINCT_E_FACTORS // - uint8_t esteppers; // XYZE_N - XYZ + uint8_t esteppers; // NUM_AXIS_N - MOV_AXIS - uint32_t planner_max_acceleration_mm_per_s2[XYZE_N], // M201 XYZE planner.max_acceleration_mm_per_s2[XYZE_N] - planner_min_segment_time_us; // M205 B planner.min_segment_time_us - float planner_axis_steps_per_mm[XYZE_N], // M92 XYZE planner.axis_steps_per_mm[XYZE_N] - planner_max_feedrate_mm_s[XYZE_N], // M203 XYZE planner.max_feedrate_mm_s[XYZE_N] - planner_acceleration, // M204 P planner.acceleration - planner_retract_acceleration, // M204 R planner.retract_acceleration - planner_travel_acceleration, // M204 T planner.travel_acceleration - planner_min_feedrate_mm_s, // M205 S planner.min_feedrate_mm_s - planner_min_travel_feedrate_mm_s, // M205 T planner.min_travel_feedrate_mm_s - planner_max_jerk[XYZE], // M205 XYZE planner.max_jerk[XYZE] - planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm + uint32_t planner_max_acceleration_mm_per_s2[NUM_AXIS_N], // M201 XYZE/ABCDE planner.max_acceleration_mm_per_s2[NUM_AXIS_N] + planner_min_segment_time_us; // M205 Q planner.min_segment_time_us + float planner_axis_steps_per_mm[NUM_AXIS_N], // M92 XYZE/ABCDE planner.axis_steps_per_mm[NUM_AXIS_N] + planner_max_feedrate_mm_s[NUM_AXIS_N], // M203 XYZE/ABCDE planner.max_feedrate_mm_s[NUM_AXIS_N] + planner_acceleration, // M204 P planner.acceleration + planner_retract_acceleration, // M204 R planner.retract_acceleration + planner_travel_acceleration, // M204 T planner.travel_acceleration + planner_min_feedrate_mm_s, // M205 S planner.min_feedrate_mm_s + planner_min_travel_feedrate_mm_s, // M205 T planner.min_travel_feedrate_mm_s + planner_max_jerk[NUM_AXIS], // M205 XYZE/ABCDE planner.max_jerk[NUM_AXIS] + planner_junction_deviation_mm; // M205 J planner.junction_deviation_mm float home_offset[XYZ]; // M206 XYZ @@ -163,6 +163,7 @@ typedef struct SettingsDataStruct { // DELTA / [XYZ]_DUAL_ENDSTOPS // #if ENABLED(DELTA) + float delta_height, // M666 H delta_endstop_adj[ABC], // M666 XYZ delta_radius, // M665 R @@ -170,10 +171,27 @@ typedef struct SettingsDataStruct { delta_segments_per_second, // M665 S delta_calibration_radius, // M665 B delta_tower_angle_trim[ABC]; // M665 XYZ + + #elif ENABLED(HANGPRINTER) + + float anchor_A_y, // M665 W + anchor_A_z, // M665 E + anchor_B_x, // M665 R + anchor_B_y, // M665 T + anchor_B_z, // M665 Y + anchor_C_x, // M665 U + anchor_C_y, // M665 I + anchor_C_z, // M665 O + anchor_D_z, // M665 P + delta_segments_per_second, // M665 S + hangprinter_calibration_radius_placeholder; + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) + float x_endstop_adj, // M666 X y_endstop_adj, // M666 Y z_endstop_adj; // M666 Z + #endif // @@ -285,6 +303,8 @@ void MarlinSettings::postprocess() { // planner position so the stepper counts will be set correctly. #if ENABLED(DELTA) recalc_delta_settings(); + #elif ENABLED(HANGPRINTER) + recalc_hangprinter_settings(); #endif #if ENABLED(PIDTEMP) @@ -418,7 +438,7 @@ void MarlinSettings::postprocess() { _FIELD_TEST(esteppers); - const uint8_t esteppers = COUNT(planner.axis_steps_per_mm) - XYZ; + const uint8_t esteppers = NUM_AXIS_N - MOV_AXIS; EEPROM_WRITE(esteppers); EEPROM_WRITE(planner.max_acceleration_mm_per_s2); @@ -432,7 +452,13 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(planner.min_travel_feedrate_mm_s); #if ENABLED(JUNCTION_DEVIATION) - const float planner_max_jerk[] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) }; + const float planner_max_jerk[] = { + #if ENABLED(HANGPRINTER) + float(DEFAULT_AJERK), float(DEFAULT_BJERK), float(DEFAULT_CJERK), float(DEFAULT_DJERK), float(DEFAULT_EJERK) + #else + float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) + #endif + }; EEPROM_WRITE(planner_max_jerk); EEPROM_WRITE(planner.junction_deviation_mm); #else @@ -560,6 +586,22 @@ void MarlinSettings::postprocess() { EEPROM_WRITE(delta_calibration_radius); // 1 float EEPROM_WRITE(delta_tower_angle_trim); // 3 floats + #elif ENABLED(HANGPRINTER) + + dummy = 0.0f; + _FIELD_TEST(anchor_A_y); + EEPROM_WRITE(anchor_A_y); // 1 float + EEPROM_WRITE(anchor_A_z); // 1 float + EEPROM_WRITE(anchor_B_x); // 1 float + EEPROM_WRITE(anchor_B_y); // 1 float + EEPROM_WRITE(anchor_B_z); // 1 float + EEPROM_WRITE(anchor_C_x); // 1 float + EEPROM_WRITE(anchor_C_y); // 1 float + EEPROM_WRITE(anchor_C_z); // 1 float + EEPROM_WRITE(anchor_D_z); // 1 float + EEPROM_WRITE(delta_segments_per_second); // 1 float + EEPROM_WRITE(dummy); // 1 float + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) _FIELD_TEST(x_endstop_adj); @@ -696,57 +738,57 @@ void MarlinSettings::postprocess() { uint16_t tmc_stepper_current[TMC_AXES] = { #if HAS_TRINAMIC - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) stepperX.getCurrent(), #else 0, #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) stepperY.getCurrent(), #else 0, #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) stepperZ.getCurrent(), #else 0, #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) stepperX2.getCurrent(), #else 0, #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) stepperY2.getCurrent(), #else 0, #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) stepperZ2.getCurrent(), #else 0, #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) stepperE0.getCurrent(), #else 0, #endif - #if E1_IS_TRINAMIC + #if AXIS_IS_TMC(E1) stepperE1.getCurrent(), #else 0, #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) stepperE2.getCurrent(), #else 0, #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) stepperE3.getCurrent(), #else 0, #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) stepperE4.getCurrent() #else 0 @@ -765,57 +807,57 @@ void MarlinSettings::postprocess() { uint32_t tmc_hybrid_threshold[TMC_AXES] = { #if ENABLED(HYBRID_THRESHOLD) - #if X_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(X) TMC_GET_PWMTHRS(X, X), #else X_HYBRID_THRESHOLD, #endif - #if Y_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Y) TMC_GET_PWMTHRS(Y, Y), #else Y_HYBRID_THRESHOLD, #endif - #if Z_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Z) TMC_GET_PWMTHRS(Z, Z), #else Z_HYBRID_THRESHOLD, #endif - #if X2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(X2) TMC_GET_PWMTHRS(X, X2), #else X2_HYBRID_THRESHOLD, #endif - #if Y2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Y2) TMC_GET_PWMTHRS(Y, Y2), #else Y2_HYBRID_THRESHOLD, #endif - #if Z2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Z2) TMC_GET_PWMTHRS(Z, Z2), #else Z2_HYBRID_THRESHOLD, #endif - #if E0_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E0) TMC_GET_PWMTHRS(E, E0), #else E0_HYBRID_THRESHOLD, #endif - #if E1_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E1) TMC_GET_PWMTHRS(E, E1), #else E1_HYBRID_THRESHOLD, #endif - #if E2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E2) TMC_GET_PWMTHRS(E, E2), #else E2_HYBRID_THRESHOLD, #endif - #if E3_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E3) TMC_GET_PWMTHRS(E, E3), #else E3_HYBRID_THRESHOLD, #endif - #if E4_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E4) TMC_GET_PWMTHRS(E, E4) #else E4_HYBRID_THRESHOLD @@ -833,17 +875,17 @@ void MarlinSettings::postprocess() { // int16_t tmc_sgt[XYZ] = { #if ENABLED(SENSORLESS_HOMING) - #if defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS)) + #if X_SENSORLESS stepperX.sgt(), #else 0, #endif - #if defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS)) + #if Y_SENSORLESS stepperY.sgt(), #else 0, #endif - #if defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS)) + #if Z_SENSORLESS stepperZ.sgt() #else 0 @@ -1010,17 +1052,17 @@ void MarlinSettings::postprocess() { const uint32_t def1[] = DEFAULT_MAX_ACCELERATION; const float def2[] = DEFAULT_AXIS_STEPS_PER_UNIT, def3[] = DEFAULT_MAX_FEEDRATE; - uint32_t tmp1[XYZ + esteppers]; + uint32_t tmp1[MOV_AXIS + esteppers]; EEPROM_READ(tmp1); // max_acceleration_mm_per_s2 EEPROM_READ(planner.min_segment_time_us); - float tmp2[XYZ + esteppers], tmp3[XYZ + esteppers]; + float tmp2[MOV_AXIS + esteppers], tmp3[MOV_AXIS + esteppers]; EEPROM_READ(tmp2); // axis_steps_per_mm EEPROM_READ(tmp3); // max_feedrate_mm_s - if (!validating) LOOP_XYZE_N(i) { - planner.max_acceleration_mm_per_s2[i] = i < XYZ + esteppers ? tmp1[i] : def1[i < COUNT(def1) ? i : COUNT(def1) - 1]; - planner.axis_steps_per_mm[i] = i < XYZ + esteppers ? tmp2[i] : def2[i < COUNT(def2) ? i : COUNT(def2) - 1]; - planner.max_feedrate_mm_s[i] = i < XYZ + esteppers ? tmp3[i] : def3[i < COUNT(def3) ? i : COUNT(def3) - 1]; + if (!validating) LOOP_NUM_AXIS_N(i) { + planner.max_acceleration_mm_per_s2[i] = i < MOV_AXIS + esteppers ? tmp1[i] : def1[i < COUNT(def1) ? i : COUNT(def1) - 1]; + planner.axis_steps_per_mm[i] = i < MOV_AXIS + esteppers ? tmp2[i] : def2[i < COUNT(def2) ? i : COUNT(def2) - 1]; + planner.max_feedrate_mm_s[i] = i < MOV_AXIS + esteppers ? tmp3[i] : def3[i < COUNT(def3) ? i : COUNT(def3) - 1]; } EEPROM_READ(planner.acceleration); @@ -1165,6 +1207,19 @@ void MarlinSettings::postprocess() { EEPROM_READ(delta_calibration_radius); // 1 float EEPROM_READ(delta_tower_angle_trim); // 3 floats + #elif ENABLED(HANGPRINTER) + EEPROM_READ(anchor_A_y); // 1 float + EEPROM_READ(anchor_A_z); // 1 float + EEPROM_READ(anchor_B_x); // 1 float + EEPROM_READ(anchor_B_y); // 1 float + EEPROM_READ(anchor_B_z); // 1 float + EEPROM_READ(anchor_C_x); // 1 float + EEPROM_READ(anchor_C_y); // 1 float + EEPROM_READ(anchor_C_z); // 1 float + EEPROM_READ(anchor_D_z); // 1 float + EEPROM_READ(delta_segments_per_second); // 1 float + EEPROM_READ(dummy); // 1 float + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) _FIELD_TEST(x_endstop_adj); @@ -1325,37 +1380,37 @@ void MarlinSettings::postprocess() { uint16_t currents[TMC_AXES]; EEPROM_READ(currents); if (!validating) { - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) SET_CURR(X); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) SET_CURR(Y); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) SET_CURR(Z); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) SET_CURR(X2); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) SET_CURR(Y2); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) SET_CURR(Z2); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) SET_CURR(E0); #endif - #if E1_IS_TRINAMIC + #if AXIS_IS_TMC(E1) SET_CURR(E1); #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) SET_CURR(E2); #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) SET_CURR(E3); #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) SET_CURR(E4); #endif } @@ -1369,37 +1424,37 @@ void MarlinSettings::postprocess() { uint32_t tmc_hybrid_threshold[TMC_AXES]; EEPROM_READ(tmc_hybrid_threshold); if (!validating) { - #if X_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(X) TMC_SET_PWMTHRS(X, X); #endif - #if Y_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Y) TMC_SET_PWMTHRS(Y, Y); #endif - #if Z_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Z) TMC_SET_PWMTHRS(Z, Z); #endif - #if X2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(X2) TMC_SET_PWMTHRS(X, X2); #endif - #if Y2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Y2) TMC_SET_PWMTHRS(Y, Y2); #endif - #if Z2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(Z2) TMC_SET_PWMTHRS(Z, Z2); #endif - #if E0_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E0) TMC_SET_PWMTHRS(E, E0); #endif - #if E1_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E1) TMC_SET_PWMTHRS(E, E1); #endif - #if E2_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E2) TMC_SET_PWMTHRS(E, E2); #endif - #if E3_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E3) TMC_SET_PWMTHRS(E, E3); #endif - #if E4_IS_TRINAMIC + #if AXIS_HAS_STEALTHCHOP(E4) TMC_SET_PWMTHRS(E, E4); #endif } @@ -1419,26 +1474,26 @@ void MarlinSettings::postprocess() { #if ENABLED(SENSORLESS_HOMING) if (!validating) { #ifdef X_HOMING_SENSITIVITY - #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_HAS_STALLGUARD(X) stepperX.sgt(tmc_sgt[0]); #endif - #if ENABLED(X2_IS_TMC2130) + #if AXIS_HAS_STALLGUARD(X2) stepperX2.sgt(tmc_sgt[0]); #endif #endif #ifdef Y_HOMING_SENSITIVITY - #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_HAS_STALLGUARD(Y) stepperY.sgt(tmc_sgt[1]); #endif - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_HAS_STALLGUARD(Y2) stepperY2.sgt(tmc_sgt[1]); #endif #endif #ifdef Z_HOMING_SENSITIVITY - #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_HAS_STALLGUARD(Z) stepperZ.sgt(tmc_sgt[2]); #endif - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_HAS_STALLGUARD(Z2) stepperZ2.sgt(tmc_sgt[2]); #endif #endif @@ -1714,8 +1769,9 @@ void MarlinSettings::postprocess() { */ void MarlinSettings::reset() { static const float tmp1[] PROGMEM = DEFAULT_AXIS_STEPS_PER_UNIT, tmp2[] PROGMEM = DEFAULT_MAX_FEEDRATE; + static const uint32_t tmp3[] PROGMEM = DEFAULT_MAX_ACCELERATION; - LOOP_XYZE_N(i) { + LOOP_NUM_AXIS_N(i) { planner.axis_steps_per_mm[i] = pgm_read_float(&tmp1[i < COUNT(tmp1) ? i : COUNT(tmp1) - 1]); planner.max_feedrate_mm_s[i] = pgm_read_float(&tmp2[i < COUNT(tmp2) ? i : COUNT(tmp2) - 1]); planner.max_acceleration_mm_per_s2[i] = pgm_read_dword_near(&tmp3[i < COUNT(tmp3) ? i : COUNT(tmp3) - 1]); @@ -1731,9 +1787,16 @@ void MarlinSettings::reset() { #if ENABLED(JUNCTION_DEVIATION) planner.junction_deviation_mm = float(JUNCTION_DEVIATION_MM); #else - planner.max_jerk[X_AXIS] = DEFAULT_XJERK; - planner.max_jerk[Y_AXIS] = DEFAULT_YJERK; - planner.max_jerk[Z_AXIS] = DEFAULT_ZJERK; + #if ENABLED(HANGPRINTER) + planner.max_jerk[A_AXIS] = DEFAULT_AJERK; + planner.max_jerk[B_AXIS] = DEFAULT_BJERK; + planner.max_jerk[C_AXIS] = DEFAULT_CJERK; + planner.max_jerk[D_AXIS] = DEFAULT_DJERK; + #else + planner.max_jerk[X_AXIS] = DEFAULT_XJERK; + planner.max_jerk[Y_AXIS] = DEFAULT_YJERK; + planner.max_jerk[Z_AXIS] = DEFAULT_ZJERK; + #endif planner.max_jerk[E_AXIS] = DEFAULT_EJERK; #endif @@ -1785,6 +1848,19 @@ void MarlinSettings::reset() { delta_calibration_radius = DELTA_CALIBRATION_RADIUS; COPY(delta_tower_angle_trim, dta); + #elif ENABLED(HANGPRINTER) + + anchor_A_y = float(ANCHOR_A_Y); + anchor_A_z = float(ANCHOR_A_Z); + anchor_B_x = float(ANCHOR_B_X); + anchor_B_y = float(ANCHOR_B_Y); + anchor_B_z = float(ANCHOR_B_Z); + anchor_C_x = float(ANCHOR_C_X); + anchor_C_y = float(ANCHOR_C_Y); + anchor_C_z = float(ANCHOR_C_Z); + anchor_D_z = float(ANCHOR_D_Z); + delta_segments_per_second = KINEMATIC_SEGMENTS_PER_SECOND; + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) #if ENABLED(X_DUAL_ENDSTOPS) @@ -1814,7 +1890,6 @@ void MarlinSettings::reset() { #endif ); #endif - #endif #if ENABLED(ULTIPANEL) @@ -2038,9 +2113,16 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Steps per unit:"); } CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.axis_steps_per_mm[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.axis_steps_per_mm[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.axis_steps_per_mm[Z_AXIS])); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M92 A", LINEAR_UNIT(planner.axis_steps_per_mm[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.axis_steps_per_mm[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.axis_steps_per_mm[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.axis_steps_per_mm[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M92 X", LINEAR_UNIT(planner.axis_steps_per_mm[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.axis_steps_per_mm[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.axis_steps_per_mm[Z_AXIS])); + #endif #if DISABLED(DISTINCT_E_FACTORS) SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.axis_steps_per_mm[E_AXIS])); #endif @@ -2058,9 +2140,16 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Maximum feedrates (units/s):"); } CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.max_feedrate_mm_s[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_feedrate_mm_s[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_feedrate_mm_s[Z_AXIS])); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M203 A", LINEAR_UNIT(planner.max_feedrate_mm_s[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_feedrate_mm_s[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_feedrate_mm_s[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_feedrate_mm_s[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M203 X", LINEAR_UNIT(planner.max_feedrate_mm_s[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_feedrate_mm_s[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_feedrate_mm_s[Z_AXIS])); + #endif #if DISABLED(DISTINCT_E_FACTORS) SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_feedrate_mm_s[E_AXIS])); #endif @@ -2078,9 +2167,16 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Maximum Acceleration (units/s2):"); } CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Z_AXIS])); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" M201 A", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[D_AXIS])); + #else + SERIAL_ECHOPAIR(" M201 X", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_acceleration_mm_per_s2[Z_AXIS])); + #endif #if DISABLED(DISTINCT_E_FACTORS) SERIAL_ECHOPAIR(" E", VOLUMETRIC_UNIT(planner.max_acceleration_mm_per_s2[E_AXIS])); #endif @@ -2104,11 +2200,15 @@ void MarlinSettings::reset() { if (!forReplay) { CONFIG_ECHO_START; - SERIAL_ECHOPGM("Advanced: B S T"); + SERIAL_ECHOPGM("Advanced: Q S T"); #if ENABLED(JUNCTION_DEVIATION) SERIAL_ECHOPGM(" J"); #else - SERIAL_ECHOPGM(" X Y Z"); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPGM(" A B C D"); + #else + SERIAL_ECHOPGM(" X Y Z"); + #endif #endif #if DISABLED(JUNCTION_DEVIATION) || ENABLED(LIN_ADVANCE) SERIAL_ECHOPGM(" E"); @@ -2116,19 +2216,25 @@ void MarlinSettings::reset() { SERIAL_EOL(); } CONFIG_ECHO_START; - SERIAL_ECHOPAIR(" M205 B", LINEAR_UNIT(planner.min_segment_time_us)); + SERIAL_ECHOPAIR(" M205 Q", LINEAR_UNIT(planner.min_segment_time_us)); SERIAL_ECHOPAIR(" S", LINEAR_UNIT(planner.min_feedrate_mm_s)); SERIAL_ECHOPAIR(" T", LINEAR_UNIT(planner.min_travel_feedrate_mm_s)); #if ENABLED(JUNCTION_DEVIATION) SERIAL_ECHOPAIR(" J", LINEAR_UNIT(planner.junction_deviation_mm)); #else - SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS])); - SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])); - SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(" A", LINEAR_UNIT(planner.max_jerk[A_AXIS])); + SERIAL_ECHOPAIR(" B", LINEAR_UNIT(planner.max_jerk[B_AXIS])); + SERIAL_ECHOPAIR(" C", LINEAR_UNIT(planner.max_jerk[C_AXIS])); + SERIAL_ECHOPAIR(" D", LINEAR_UNIT(planner.max_jerk[D_AXIS])); + #else + SERIAL_ECHOPAIR(" X", LINEAR_UNIT(planner.max_jerk[X_AXIS])); + SERIAL_ECHOPAIR(" Y", LINEAR_UNIT(planner.max_jerk[Y_AXIS])); + SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(planner.max_jerk[Z_AXIS])); + #endif SERIAL_ECHOPAIR(" E", LINEAR_UNIT(planner.max_jerk[E_AXIS])); #endif - SERIAL_EOL(); #if HAS_M206_COMMAND @@ -2220,8 +2326,8 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM(" meshes.\n"); } - ubl.report_current_mesh(); - + //ubl.report_current_mesh(PORTVAR_SOLO); // This is too verbose for large mesh's. A better (more terse) + // solution needs to be found. #elif ENABLED(AUTO_BED_LEVELING_BILINEAR) if (leveling_is_valid()) { @@ -2266,6 +2372,24 @@ void MarlinSettings::reset() { SERIAL_ECHOPAIR(" Z", LINEAR_UNIT(delta_tower_angle_trim[C_AXIS])); SERIAL_EOL(); + #elif ENABLED(HANGPRINTER) + if (!forReplay) { + CONFIG_ECHO_START; + SERIAL_ECHOLNPGM("Hangprinter settings: W E R T Y U I O P S"); + } + CONFIG_ECHO_START; + SERIAL_ECHOPAIR(" M665 W", anchor_A_y); + SERIAL_ECHOPAIR(" E", anchor_A_z); + SERIAL_ECHOPAIR(" R", anchor_B_x); + SERIAL_ECHOPAIR(" T", anchor_B_y); + SERIAL_ECHOPAIR(" Y", anchor_B_z); + SERIAL_ECHOPAIR(" U", anchor_C_x); + SERIAL_ECHOPAIR(" I", anchor_C_y); + SERIAL_ECHOPAIR(" O", anchor_C_z); + SERIAL_ECHOPAIR(" P", anchor_D_z); + SERIAL_ECHOPAIR(" S", delta_segments_per_second); + SERIAL_EOL(); + #elif ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) if (!forReplay) { @@ -2428,61 +2552,61 @@ void MarlinSettings::reset() { #if HAS_TRINAMIC /** - * TMC2130 / TMC2208 / TRAMS stepper driver current + * TMC2130 / TMC2208 stepper driver current */ if (!forReplay) { CONFIG_ECHO_START; SERIAL_ECHOLNPGM("Stepper driver current:"); } CONFIG_ECHO_START; - #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) say_M906(); #endif - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) SERIAL_ECHOPAIR(" X", stepperX.getCurrent()); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) SERIAL_ECHOPAIR(" Y", stepperY.getCurrent()); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) SERIAL_ECHOPAIR(" Z", stepperZ.getCurrent()); #endif - #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) SERIAL_EOL(); #endif - #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) say_M906(); SERIAL_ECHOPGM(" I1"); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) SERIAL_ECHOPAIR(" X", stepperX2.getCurrent()); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) SERIAL_ECHOPAIR(" Y", stepperY2.getCurrent()); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) SERIAL_ECHOPAIR(" Z", stepperZ2.getCurrent()); #endif - #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) SERIAL_EOL(); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) say_M906(); SERIAL_ECHOLNPAIR(" T0 E", stepperE0.getCurrent()); #endif - #if E_STEPPERS > 1 && E1_IS_TRINAMIC + #if E_STEPPERS > 1 && AXIS_IS_TMC(E1) say_M906(); SERIAL_ECHOLNPAIR(" T1 E", stepperE1.getCurrent()); #endif - #if E_STEPPERS > 2 && E2_IS_TRINAMIC + #if E_STEPPERS > 2 && AXIS_IS_TMC(E2) say_M906(); SERIAL_ECHOLNPAIR(" T2 E", stepperE2.getCurrent()); #endif - #if E_STEPPERS > 3 && E3_IS_TRINAMIC + #if E_STEPPERS > 3 && AXIS_IS_TMC(E3) say_M906(); SERIAL_ECHOLNPAIR(" T3 E", stepperE3.getCurrent()); #endif - #if E_STEPPERS > 4 && E4_IS_TRINAMIC + #if E_STEPPERS > 4 && AXIS_IS_TMC(E4) say_M906(); SERIAL_ECHOLNPAIR(" T4 E", stepperE4.getCurrent()); #endif @@ -2497,54 +2621,54 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Hybrid Threshold:"); } CONFIG_ECHO_START; - #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) say_M913(); #endif - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X)); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y)); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z)); #endif - #if X_IS_TRINAMIC || Y_IS_TRINAMIC || Z_IS_TRINAMIC + #if AXIS_IS_TMC(X) || AXIS_IS_TMC(Y) || AXIS_IS_TMC(Z) SERIAL_EOL(); #endif - #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) say_M913(); SERIAL_ECHOPGM(" I1"); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) SERIAL_ECHOPAIR(" X", TMC_GET_PWMTHRS(X, X2)); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) SERIAL_ECHOPAIR(" Y", TMC_GET_PWMTHRS(Y, Y2)); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) SERIAL_ECHOPAIR(" Z", TMC_GET_PWMTHRS(Z, Z2)); #endif - #if X2_IS_TRINAMIC || Y2_IS_TRINAMIC || Z2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) || AXIS_IS_TMC(Y2) || AXIS_IS_TMC(Z2) SERIAL_EOL(); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) say_M913(); SERIAL_ECHOLNPAIR(" T0 E", TMC_GET_PWMTHRS(E, E0)); #endif - #if E_STEPPERS > 1 && E1_IS_TRINAMIC + #if E_STEPPERS > 1 && AXIS_IS_TMC(E1) say_M913(); SERIAL_ECHOLNPAIR(" T1 E", TMC_GET_PWMTHRS(E, E1)); #endif - #if E_STEPPERS > 2 && E2_IS_TRINAMIC + #if E_STEPPERS > 2 && AXIS_IS_TMC(E2) say_M913(); SERIAL_ECHOLNPAIR(" T2 E", TMC_GET_PWMTHRS(E, E2)); #endif - #if E_STEPPERS > 3 && E3_IS_TRINAMIC + #if E_STEPPERS > 3 && AXIS_IS_TMC(E3) say_M913(); SERIAL_ECHOLNPAIR(" T3 E", TMC_GET_PWMTHRS(E, E3)); #endif - #if E_STEPPERS > 4 && E4_IS_TRINAMIC + #if E_STEPPERS > 4 && AXIS_IS_TMC(E4) say_M913(); SERIAL_ECHOLNPAIR(" T4 E", TMC_GET_PWMTHRS(E, E4)); #endif @@ -2560,36 +2684,33 @@ void MarlinSettings::reset() { SERIAL_ECHOLNPGM("Sensorless homing threshold:"); } CONFIG_ECHO_START; - #define HAS_X_SENSORLESS (defined(X_HOMING_SENSITIVITY) && (ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS))) - #define HAS_Y_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && (ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS))) - #define HAS_Z_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && (ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS))) - #if HAS_X_SENSORLESS || HAS_Y_SENSORLESS || HAS_Z_SENSORLESS + #if X_SENSORLESS || Y_SENSORLESS || Z_SENSORLESS say_M914(); - #if HAS_X_SENSORLESS + #if X_SENSORLESS SERIAL_ECHOPAIR(" X", stepperX.sgt()); #endif - #if HAS_Y_SENSORLESS + #if Y_SENSORLESS SERIAL_ECHOPAIR(" Y", stepperY.sgt()); #endif - #if HAS_Z_SENSORLESS + #if Z_SENSORLESS SERIAL_ECHOPAIR(" Z", stepperZ.sgt()); #endif SERIAL_EOL(); #endif - #define HAS_X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && ENABLED(X2_IS_TMC2130)) - #define HAS_Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && ENABLED(Y2_IS_TMC2130)) - #define HAS_Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && ENABLED(Z2_IS_TMC2130)) - #if HAS_X2_SENSORLESS || HAS_Y2_SENSORLESS || HAS_Z2_SENSORLESS + #define X2_SENSORLESS (defined(X_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(X2)) + #define Y2_SENSORLESS (defined(Y_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Y2)) + #define Z2_SENSORLESS (defined(Z_HOMING_SENSITIVITY) && AXIS_HAS_STALLGUARD(Z2)) + #if X2_SENSORLESS || Y2_SENSORLESS || Z2_SENSORLESS say_M914(); SERIAL_ECHOPGM(" I1"); - #if HAS_X2_SENSORLESS + #if X2_SENSORLESS SERIAL_ECHOPAIR(" X", stepperX2.sgt()); #endif - #if HAS_Y2_SENSORLESS + #if Y2_SENSORLESS SERIAL_ECHOPAIR(" Y", stepperY2.sgt()); #endif - #if HAS_Z2_SENSORLESS + #if Z2_SENSORLESS SERIAL_ECHOPAIR(" Z", stepperZ2.sgt()); #endif SERIAL_EOL(); diff --git a/Marlin/drivers.h b/Marlin/drivers.h new file mode 100644 index 0000000000..3a8ff4a2a0 --- /dev/null +++ b/Marlin/drivers.h @@ -0,0 +1,73 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ +#ifndef _DRIVERS_H_ +#define _DRIVERS_H_ + +#include "MarlinConfig.h" + +#define A4988 0x001 +#define DRV8825 0x002 +#define LV8729 0x003 +#define L6470 0x104 +#define TB6560 0x005 +#define TB6600 0x006 +#define TMC2100 0x007 +#define TMC2130 0x108 +#define TMC2130_STANDALONE 0x008 +#define TMC2208 0x109 +#define TMC2208_STANDALONE 0x009 +#define TMC26X 0x10A +#define TMC26X_STANDALONE 0x00A +#define TMC2660 0x10B +#define TMC2660_STANDALONE 0x00B + +#define _AXIS_DRIVER_TYPE(A,T) ( defined(A##_DRIVER_TYPE) && (A##_DRIVER_TYPE == T) ) + +#define AXIS_DRIVER_TYPE_X(T) _AXIS_DRIVER_TYPE(X,T) +#define AXIS_DRIVER_TYPE_Y(T) _AXIS_DRIVER_TYPE(Y,T) +#define AXIS_DRIVER_TYPE_Z(T) _AXIS_DRIVER_TYPE(Z,T) +#define AXIS_DRIVER_TYPE_X2(T) (ENABLED(X_DUAL_STEPPER_DRIVERS) || ENABLED(DUAL_X_CARRIAGE)) && _AXIS_DRIVER_TYPE(X2,T) +#define AXIS_DRIVER_TYPE_Y2(T) (ENABLED(Y_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Y2,T)) +#define AXIS_DRIVER_TYPE_Z2(T) (ENABLED(Z_DUAL_STEPPER_DRIVERS) && _AXIS_DRIVER_TYPE(Z2,T)) +#define AXIS_DRIVER_TYPE_E0(T) (E_STEPPERS > 0 && _AXIS_DRIVER_TYPE(E0,T)) +#define AXIS_DRIVER_TYPE_E1(T) (E_STEPPERS > 1 && _AXIS_DRIVER_TYPE(E1,T)) +#define AXIS_DRIVER_TYPE_E2(T) (E_STEPPERS > 2 && _AXIS_DRIVER_TYPE(E2,T)) +#define AXIS_DRIVER_TYPE_E3(T) (E_STEPPERS > 3 && _AXIS_DRIVER_TYPE(E3,T)) +#define AXIS_DRIVER_TYPE_E4(T) (E_STEPPERS > 4 && _AXIS_DRIVER_TYPE(E4,T)) + +#define AXIS_DRIVER_TYPE(A,T) AXIS_DRIVER_TYPE_##A(T) + +#define HAS_DRIVER(T) (AXIS_DRIVER_TYPE_X(T) || AXIS_DRIVER_TYPE_X2(T) || \ + AXIS_DRIVER_TYPE_Y(T) || AXIS_DRIVER_TYPE_Y2(T) || \ + AXIS_DRIVER_TYPE_Z(T) || AXIS_DRIVER_TYPE_Z2(T) || \ + AXIS_DRIVER_TYPE_E0(T) || AXIS_DRIVER_TYPE_E1(T) || \ + AXIS_DRIVER_TYPE_E2(T) || AXIS_DRIVER_TYPE_E3(T) || \ + AXIS_DRIVER_TYPE_E4(T) ) + +// Test for supported TMC drivers that require advanced configuration +// Does not match standalone configurations +#define HAS_TRINAMIC (HAS_DRIVER(TMC2130) || HAS_DRIVER(TMC2208)) + +#define AXIS_IS_TMC(A) ( AXIS_DRIVER_TYPE_##A(TMC2130) || \ + AXIS_DRIVER_TYPE_##A(TMC2208) ) + +#endif // _DRIVERS_H_ diff --git a/Marlin/endstops.cpp b/Marlin/endstops.cpp index 3cffff1832..39fbc80134 100644 --- a/Marlin/endstops.cpp +++ b/Marlin/endstops.cpp @@ -189,7 +189,7 @@ void Endstops::init() { } // Endstops::init -// Called from ISR: Poll endstop state if required +// Called at ~1KHz from Temperature ISR: Poll endstop state if required void Endstops::poll() { #if ENABLED(PINS_DEBUGGING) @@ -229,11 +229,13 @@ void Endstops::not_homing() { #endif } -// If the last move failed to trigger an endstop, call kill -void Endstops::validate_homing_move() { - if (!trigger_state()) kill(PSTR(MSG_ERR_HOMING_FAILED)); - hit_on_purpose(); -} +#if ENABLED(VALIDATE_HOMING_ENDSTOPS) + // If the last move failed to trigger an endstop, call kill + void Endstops::validate_homing_move() { + if (trigger_state()) hit_on_purpose(); + else kill(PSTR(MSG_ERR_HOMING_FAILED)); + } +#endif // Enable / disable endstop z-probe checking #if HAS_BED_PROBE @@ -256,8 +258,9 @@ void Endstops::validate_homing_move() { } #endif -void Endstops::report_state() { - if (hit_state) { +void Endstops::event_handler() { + static uint8_t prev_hit_state; // = 0 + if (hit_state && hit_state != prev_hit_state) { #if ENABLED(ULTRA_LCD) char chrX = ' ', chrY = ' ', chrZ = ' ', chrP = ' '; #define _SET_STOP_CHAR(A,C) (chr## A = C) @@ -293,8 +296,6 @@ void Endstops::report_state() { lcd_status_printf_P(0, PSTR(MSG_LCD_ENDSTOPS " %c %c %c %c"), chrX, chrY, chrZ, chrP); #endif - hit_on_purpose(); - #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) && ENABLED(SDSUPPORT) if (planner.abort_on_endstop_hit) { card.sdprinting = false; @@ -304,14 +305,19 @@ void Endstops::report_state() { } #endif } + prev_hit_state = hit_state; } // Endstops::report_state -void Endstops::M119() { +static void print_es_state(const bool is_hit, const char * const label=NULL) { + if (label) serialprintPGM(label); + SERIAL_PROTOCOLPGM(": "); + serialprintPGM(is_hit ? PSTR(MSG_ENDSTOP_HIT) : PSTR(MSG_ENDSTOP_OPEN)); + SERIAL_EOL(); +} + +void _O2 Endstops::M119() { SERIAL_PROTOCOLLNPGM(MSG_M119_REPORT); - #define ES_REPORT(AXIS) do{ \ - SERIAL_PROTOCOLPGM(MSG_##AXIS); \ - SERIAL_PROTOCOLLN(((READ(AXIS##_PIN)^AXIS##_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN)); \ - }while(0) + #define ES_REPORT(S) print_es_state(READ(S##_PIN) != S##_ENDSTOP_INVERTING, PSTR(MSG_##S)) #if HAS_X_MIN ES_REPORT(X_MIN); #endif @@ -349,12 +355,33 @@ void Endstops::M119() { ES_REPORT(Z2_MAX); #endif #if ENABLED(Z_MIN_PROBE_ENDSTOP) - SERIAL_PROTOCOLPGM(MSG_Z_PROBE); - SERIAL_PROTOCOLLN(((READ(Z_MIN_PROBE_PIN)^Z_MIN_PROBE_ENDSTOP_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN)); + print_es_state(READ(Z_MIN_PROBE_PIN) != Z_MIN_PROBE_ENDSTOP_INVERTING, PSTR(MSG_Z_PROBE)); #endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) - SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR); - SERIAL_PROTOCOLLN(((READ(FIL_RUNOUT_PIN)^FIL_RUNOUT_INVERTING) ? MSG_ENDSTOP_HIT : MSG_ENDSTOP_OPEN)); + #if NUM_RUNOUT_SENSORS == 1 + print_es_state(READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING, PSTR(MSG_FILAMENT_RUNOUT_SENSOR)); + #else + for (uint8_t i = 1; i <= NUM_RUNOUT_SENSORS; i++) { + pin_t pin; + switch (i) { + default: continue; + case 1: pin = FIL_RUNOUT_PIN; break; + case 2: pin = FIL_RUNOUT2_PIN; break; + #if NUM_RUNOUT_SENSORS > 2 + case 3: pin = FIL_RUNOUT3_PIN; break; + #if NUM_RUNOUT_SENSORS > 3 + case 4: pin = FIL_RUNOUT4_PIN; break; + #if NUM_RUNOUT_SENSORS > 4 + case 5: pin = FIL_RUNOUT5_PIN; break; + #endif + #endif + #endif + } + SERIAL_PROTOCOLPGM(MSG_FILAMENT_RUNOUT_SENSOR); + if (i > 1) { SERIAL_CHAR(' '); SERIAL_CHAR('0' + i); } + print_es_state(digitalRead(pin) != FIL_RUNOUT_INVERTING); + } + #endif #endif } // Endstops::M119 @@ -365,7 +392,7 @@ void Endstops::M119() { #define _ENDSTOP_PIN(AXIS, MINMAX) AXIS ##_## MINMAX ##_PIN #define _ENDSTOP_INVERTING(AXIS, MINMAX) AXIS ##_## MINMAX ##_ENDSTOP_INVERTING -// Check endstops - Could be called from ISR! +// Check endstops - Could be called from Temperature ISR! void Endstops::update() { #if DISABLED(ENDSTOP_NOISE_FILTER) @@ -540,7 +567,7 @@ void Endstops::update() { if (dual_hit) { \ _ENDSTOP_HIT(AXIS1, MINMAX); \ /* if not performing home or if both endstops were trigged during homing... */ \ - if (!stepper.homing_dual_axis || dual_hit == 0x3) \ + if (!stepper.homing_dual_axis || dual_hit == 0b11) \ planner.endstop_triggered(_AXIS(AXIS1)); \ } \ }while(0) diff --git a/Marlin/endstops.h b/Marlin/endstops.h index a6ea580d30..2114e23e3a 100644 --- a/Marlin/endstops.h +++ b/Marlin/endstops.h @@ -29,6 +29,8 @@ #include "MarlinConfig.h" +#define VALIDATE_HOMING_ENDSTOPS + enum EndstopEnum : char { X_MIN, Y_MIN, @@ -127,7 +129,7 @@ class Endstops { /** * Report endstop hits to serial. Called from loop(). */ - static void report_state(); + static void event_handler(); /** * Report endstop positions in response to M119 @@ -143,8 +145,12 @@ class Endstops { // Disable / Enable endstops based on ENSTOPS_ONLY_FOR_HOMING and global enable static void not_homing(); - // If the last move failed to trigger an endstop, call kill - static void validate_homing_move(); + #if ENABLED(VALIDATE_HOMING_ENDSTOPS) + // If the last move failed to trigger an endstop, call kill + static void validate_homing_move(); + #else + FORCE_INLINE static void validate_homing_move() { hit_on_purpose(); } + #endif // Clear endstops (i.e., they were hit intentionally) to suppress the report FORCE_INLINE static void hit_on_purpose() { hit_state = 0; } diff --git a/Marlin/enum.h b/Marlin/enum.h index d525e8ee9b..470afef1da 100644 --- a/Marlin/enum.h +++ b/Marlin/enum.h @@ -39,10 +39,14 @@ enum AxisEnum : unsigned char { B_AXIS = 1, Z_AXIS = 2, C_AXIS = 2, - E_AXIS = 3, - X_HEAD = 4, - Y_HEAD = 5, - Z_HEAD = 6, + E_CART = 3, + #if ENABLED(HANGPRINTER) // Hangprinter order: A_AXIS, B_AXIS, C_AXIS, D_AXIS, E_AXIS + D_AXIS = 3, + E_AXIS = 4, + #else + E_AXIS = 3, + #endif + X_HEAD, Y_HEAD, Z_HEAD, ALL_AXES = 0xFE, NO_AXIS = 0xFF }; @@ -54,11 +58,11 @@ enum AxisEnum : unsigned char { #define LOOP_NA(VAR) LOOP_L_N(VAR, NUM_AXIS) #define LOOP_XYZ(VAR) LOOP_S_LE_N(VAR, X_AXIS, Z_AXIS) -#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_AXIS) +#define LOOP_XYZE(VAR) LOOP_S_LE_N(VAR, X_AXIS, E_CART) #define LOOP_XYZE_N(VAR) LOOP_S_L_N(VAR, X_AXIS, XYZE_N) -#define LOOP_ABC(VAR) LOOP_S_LE_N(VAR, A_AXIS, C_AXIS) -#define LOOP_ABCE(VAR) LOOP_S_LE_N(VAR, A_AXIS, E_AXIS) -#define LOOP_ABCE_N(VAR) LOOP_S_L_N(VAR, A_AXIS, XYZE_N) +#define LOOP_MOV_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, MOV_AXIS) +#define LOOP_NUM_AXIS(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS) +#define LOOP_NUM_AXIS_N(VAR) LOOP_S_L_N(VAR, A_AXIS, NUM_AXIS_N) typedef enum { LINEARUNIT_MM, diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h index aad12e7d4d..69157810a7 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 @@ -457,15 +459,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -540,12 +547,55 @@ #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -613,6 +663,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 10.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -663,6 +723,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -738,10 +799,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -765,6 +826,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -803,9 +865,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1050,8 +1109,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1341,11 +1400,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1373,19 +1432,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1412,6 +1458,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1476,12 +1531,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1499,40 +1560,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1541,28 +1568,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1570,39 +1575,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1649,6 +1643,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1669,25 +1740,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1703,6 +1760,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1718,6 +1782,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1777,7 +1869,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1842,9 +1934,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h index 41671fbe98..2503bc299e 100644 --- a/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h +++ b/Marlin/example_configurations/AlephObjects/TAZ4/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,4,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 4, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h index 70739cf1a1..282b0a9add 100644 --- a/Marlin/example_configurations/AliExpress/CL-260/Configuration.h +++ b/Marlin/example_configurations/AliExpress/CL-260/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 800 @@ -514,18 +521,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A2plus/Configuration.h b/Marlin/example_configurations/Anet/A2plus/Configuration.h new file mode 100644 index 0000000000..67e22cfe9e --- /dev/null +++ b/Marlin/example_configurations/Anet/A2plus/Configuration.h @@ -0,0 +1,1997 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Florian S, ANET A2 config 26.8.18)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_ANET_10 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "ANET A2" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 11 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 11 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 250 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Default A2 + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // ANET A2 + // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5): + #define DEFAULT_bedKp 295.00 + #define DEFAULT_bedKi 35.65 + #define DEFAULT_bedKd 610.21 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 300 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } + +// ANET A2 Firmwae V2.0 defaults: (steps/mm) +// Xsteps/mm: +100.0, Ysteps/mm: +100.0, Zsteps/mm: +0400.0, eSteps/mm: +0095.0 +#define DEFAULT_AXIS_STEPS_PER_UNIT {100, 100, 400, 95} +//#define DEFAULT_AXIS_STEPS_PER_UNIT {80, 80, 400, 95} + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +// ANET A2 Firmware V2.0 defaults (Vmax): +// Vmax x: 400, Vmax y: 400, Vmax z: 4, Vmax e: 25 +#define DEFAULT_MAX_FEEDRATE {400, 400, 4, 25} +//#define DEFAULT_MAX_FEEDRATE {400, 400, 20, 50} + + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +//#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +// ANET A2 Firmware V2.0 defaults (Amax): +// Amx x: 9000, Amax Y: 5000, Amax z: 50, Amax e: 10000 +#define DEFAULT_MAX_ACCELERATION { 9000, 5000, 50, 10000 } +//#define DEFAULT_MAX_ACCELERATION { 10000, 10000, 200, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +// ANET A2 Firmware V2.0 defaults: +// Accel: 1000 A-retract: 1000 +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +//#define DEFAULT_ACCELERATION 2000 // X, Y, Z and E acceleration for printing moves +//#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts +//#define DEFAULT_TRAVEL_ACCELERATION 4000 // X, Y, Z acceleration for travel (non printing) moves + + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +// ANET A2 Firmware V2.0 defaults (jerk): +// Vxy-jerk: 20, Vz-jerk: +000.30, Ve-jerk: 10 +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 10.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +//#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +//#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +//#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +//ANET A2 with BLTouch/3D-Touch mounted right to the nozzle +#define X_PROBE_OFFSET_FROM_EXTRUDER 39 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 +//#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#if 1 // 0 for less clearance + #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 5 // Z position after probing is done +#else + #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow + #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes + //#define Z_AFTER_PROBING 3 // Z position after probing is done +#endif + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +//#define INVERT_Y_DIR true +//#define INVERT_Z_DIR false +//ANET A2: +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +//#define X_BED_SIZE 200 +//#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define X_MAX_POS X_BED_SIZE +//#define Y_MAX_POS Y_BED_SIZE +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 200 + +// ANET A2 Firmware V2.0 defaults: +//#define X_BED_SIZE 220 +//#define Y_BED_SIZE 270 +//#define X_MIN_POS 0 +//#define Y_MIN_POS 0 +//#define Z_MIN_POS 0 +//#define Z_MAX_POS 220 + +// ANET A2 with glass bed clamps and safety margin, X0/Y0 0 front left bed edge: +#define X_BED_SIZE 190 +#define Y_BED_SIZE 250 +#define X_MIN_POS -7 +#define Y_MIN_POS -5 +#define Z_MIN_POS 0 +#define Z_MAX_POS 180 + + +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 4 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION 15 + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 15) + //#define FRONT_PROBE_BED_POSITION 15 + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 15) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // ANET A2 default is 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 80 +#define PREHEAT_2_FAN_SPEED 0 // ANET A2 default is 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h b/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h new file mode 100644 index 0000000000..5375d59482 --- /dev/null +++ b/Marlin/example_configurations/Anet/A2plus/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 60 // Seconds + #define WATCH_TEMP_INCREASE 5 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 60 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 5 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 180 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +//#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + //#define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A6/Configuration.h b/Marlin/example_configurations/Anet/A6/Configuration.h index e926b2d5fa..d407aa8a15 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration.h +++ b/Marlin/example_configurations/Anet/A6/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,14 +301,14 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ -#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_BED 5 +#define TEMP_SENSOR_BED 11 #define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -457,15 +459,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -534,18 +541,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -641,6 +691,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -691,6 +751,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -788,10 +849,10 @@ #define XY_PROBE_SPEED 8000 //#define XY_PROBE_SPEED 6000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) // The number of probes to perform at each point. @@ -816,10 +877,12 @@ #if 1 // 0 for less clearance #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #else #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points + #define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 3 // Z position after probing is done #endif @@ -862,9 +925,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1168,8 +1228,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1473,11 +1533,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1505,19 +1565,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1544,6 +1591,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1608,12 +1664,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1631,40 +1693,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1673,30 +1701,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1704,39 +1708,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1783,6 +1776,85 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1803,25 +1875,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1837,6 +1895,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1852,6 +1917,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1911,7 +2004,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1976,9 +2069,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A6/Configuration_adv.h b/Marlin/example_configurations/Anet/A6/Configuration_adv.h index cce73e7d34..68c011c00e 100644 --- a/Marlin/example_configurations/Anet/A6/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A6/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Anet/A8/Configuration.h b/Marlin/example_configurations/Anet/A8/Configuration.h index 493156d6bf..1e6da8b0e6 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration.h +++ b/Marlin/example_configurations/Anet/A8/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -202,11 +202,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -260,6 +260,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -269,6 +270,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -300,7 +302,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -444,15 +446,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 160 // 160 guards against false tripping when the extruder fan kicks on. -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -529,10 +536,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -600,6 +650,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -650,6 +710,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -725,10 +786,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 6000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -752,6 +813,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -790,9 +852,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -965,10 +1024,10 @@ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION 15 - //#define RIGHT_PROBE_BED_POSITION 190 - //#define FRONT_PROBE_BED_POSITION 15 - //#define BACK_PROBE_BED_POSITION 170 + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -991,17 +1050,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - #define PROBE_PT_1_X 20 - #define PROBE_PT_1_Y 160 - #define PROBE_PT_2_X 20 - #define PROBE_PT_2_Y 10 - #define PROBE_PT_3_X 180 - #define PROBE_PT_3_Y 10 - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1039,17 +1087,17 @@ * Override if the automatically selected points are inadequate. */ #if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 20 + #define PROBE_PT_1_Y 160 + #define PROBE_PT_2_X 20 + #define PROBE_PT_2_Y 10 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 10 #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1339,11 +1387,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1371,19 +1419,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1410,6 +1445,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1474,12 +1518,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1497,40 +1547,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1539,30 +1555,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1570,39 +1562,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // #define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1649,6 +1630,85 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// Note: Details on connecting to the Anet V1.0 controller are in the file pins_ANET_10.h +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1669,25 +1729,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1703,6 +1749,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1718,6 +1771,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1777,7 +1858,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1842,9 +1923,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Anet/A8/Configuration_adv.h b/Marlin/example_configurations/Anet/A8/Configuration_adv.h index a354adffda..b8680ae37c 100644 --- a/Marlin/example_configurations/Anet/A8/Configuration_adv.h +++ b/Marlin/example_configurations/Anet/A8/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h index a138ef5314..23ec2bda42 100644 --- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ //#define PREVENT_COLD_EXTRUSION //#define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -514,18 +521,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -551,7 +601,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 400} /** * Default Max Feed Rate (mm/s) @@ -593,6 +643,16 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_ZJERK 0.65 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 9000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h index 4f27688262..d5b8ff75f9 100644 --- a/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h +++ b/Marlin/example_configurations/BIBO/TouchX/Cyclops/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h index 8bdc832ff5..690ffc9fe3 100644 --- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 5 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -514,18 +521,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -const bool X_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Y_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MIN_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool X_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Y_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MAX_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. -const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define DEFAULT_ZJERK 0.65 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ const bool Z_MIN_PROBE_ENDSTOP_INVERTING = true; // set to true to invert the lo // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h index 6fc096c17d..779505abd1 100644 --- a/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h +++ b/Marlin/example_configurations/BIBO/TouchX/default/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration.h b/Marlin/example_configurations/BQ/Hephestos/Configuration.h index ba9844c5a8..d74e70bfaf 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -425,15 +427,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -510,10 +517,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -581,6 +631,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -631,6 +691,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -706,10 +767,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -733,6 +794,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -771,9 +833,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1018,8 +1077,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1309,11 +1368,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1341,19 +1400,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1380,6 +1426,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1444,12 +1499,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1467,40 +1528,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1509,28 +1536,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1538,39 +1543,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1617,6 +1611,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1637,25 +1708,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1671,6 +1728,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1686,6 +1750,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1745,7 +1837,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1810,9 +1902,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h index 8884850962..194d5d5afc 100644 --- a/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h index 3ab40ebf81..e4cf80e126 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -95,7 +95,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -209,11 +209,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -267,6 +267,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -276,6 +277,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -307,7 +309,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 70 #define TEMP_SENSOR_1 0 @@ -332,7 +334,7 @@ #define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. // Bed temperature must be close to target for this long before M190 returns success -#define TEMP_BED_RESIDENCY_TIME 0 // (seconds) +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) #define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one #define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. @@ -349,12 +351,12 @@ // When temperature exceeds max temp, your heater will be switched off. // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! // You should use MINTEMP for thermistor short/failure protection. -#define HEATER_0_MAXTEMP 275 +#define HEATER_0_MAXTEMP 230 #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 -#define BED_MAXTEMP 110 +#define BED_MAXTEMP 100 //=========================================================================== //============================= PID Settings ================================ @@ -373,13 +375,13 @@ //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 50 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. // Tuned PID values using M303 - #define DEFAULT_Kp 19.18 - #define DEFAULT_Ki 1.36 - #define DEFAULT_Kd 67.42 + #define DEFAULT_Kp 23.75 + #define DEFAULT_Ki 2.12 + #define DEFAULT_Kd 66.63 // BQ firmware stock PID values //#define DEFAULT_Kp 10.7 @@ -438,15 +440,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -523,10 +530,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -552,14 +602,14 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 210.02 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 160, 160, 8000, 218.77 } /** * Default Max Feed Rate (mm/s) * Override with M203 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_FEEDRATE { 167, 167, 3.3, 167 } +#define DEFAULT_MAX_FEEDRATE { 300, 300, 3, 120 } /** * Default Max Acceleration (change/s) change = mm/s @@ -567,7 +617,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 100, 3000 } +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 3000 } /** * Default Acceleration (change/s) change = mm/s @@ -577,9 +627,9 @@ * M204 R Retract Acceleration * M204 T Travel Acceleration */ -#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves /** * Default Jerk (mm/s) @@ -589,10 +639,20 @@ * When changing speed and direction, if the difference is less than the * value set here, it may happen instantaneously. */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK 5.0 #define DEFAULT_ZJERK 0.3 -#define DEFAULT_EJERK 1.0 +#define DEFAULT_EJERK 10.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION //=========================================================================== //============================= Z Probe Options ============================= @@ -644,6 +704,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -711,18 +772,15 @@ */ #define X_PROBE_OFFSET_FROM_EXTRUDER 34 // X offset: -left +right [of the nozzle] #define Y_PROBE_OFFSET_FROM_EXTRUDER 15 // Y offset: -front +behind [the nozzle] -#define Z_PROBE_OFFSET_FROM_EXTRUDER -4 // Z offset: -below +above [the nozzle] - -// Certain types of probes need to stay away from edges -#define MIN_PROBE_EDGE 10 +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -746,16 +804,17 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points -//#define Z_AFTER_PROBING 2 // Z position after probing is done +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset -#define Z_PROBE_OFFSET_RANGE_MIN -5.5 -#define Z_PROBE_OFFSET_RANGE_MAX -3 +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -#define Z_MIN_PROBE_REPEATABILITY_TEST +//#define Z_MIN_PROBE_REPEATABILITY_TEST // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } @@ -784,9 +843,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -798,11 +854,11 @@ // @section homing -//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed +#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. -#define Z_HOMING_HEIGHT 5 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... +//#define Z_HOMING_HEIGHT 3 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... // Be sure you have this distance over your Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX, -1=MIN @@ -946,8 +1002,8 @@ #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 185.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 50.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. #endif #endif @@ -955,8 +1011,8 @@ #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y 4 + #define GRID_MAX_POINTS_X 5 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Set the boundaries for probing (where the probe can reach). //#define LEFT_PROBE_BED_POSITION X_MIN_POS + (X_PROBE_OFFSET_FROM_EXTRUDER) @@ -971,7 +1027,7 @@ // Beyond the probed grid, continue the implied tilt? // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID + #define EXTRAPOLATE_BEYOND_GRID // // Experimental Subdivision of the grid by Catmull-Rom method. @@ -985,17 +1041,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - #define PROBE_PT_1_X X_MIN_POS + X_PROBE_OFFSET_FROM_EXTRUDER - #define PROBE_PT_1_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - #define PROBE_PT_2_X X_MAX_POS - (X_PROBE_OFFSET_FROM_EXTRUDER) - #define PROBE_PT_2_Y Y_MIN_POS + Y_PROBE_OFFSET_FROM_EXTRUDER - #define PROBE_PT_3_X ((X_MIN_POS + X_MAX_POS) / 2) - #define PROBE_PT_3_Y Y_MAX_POS - (Y_PROBE_OFFSET_FROM_EXTRUDER) - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1042,8 +1087,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1064,7 +1109,7 @@ * Commands to execute at the end of G29 probing. * Useful to retract or move the Z probe out of the way. */ -//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" +#define Z_PROBE_END_SCRIPT "G27 P0" // @section homing @@ -1095,8 +1140,8 @@ #endif // Homing speeds (mm/m) -#define HOMING_FEEDRATE_XY (60*60) -#define HOMING_FEEDRATE_Z 120 +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z ( 4*60) // @section calibrate @@ -1180,7 +1225,7 @@ // every couple of seconds when it can't accept commands. // #define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages -#define DEFAULT_KEEPALIVE_INTERVAL 10 // Number of seconds between "busy" messages. Set with M113. +#define DEFAULT_KEEPALIVE_INTERVAL 5 // Number of seconds between "busy" messages. Set with M113. #define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating // @@ -1201,12 +1246,12 @@ // @section temperature // Preheat Constants -#define PREHEAT_1_TEMP_HOTEND 205 +#define PREHEAT_1_TEMP_HOTEND 180 #define PREHEAT_1_TEMP_BED 50 #define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 -#define PREHEAT_2_TEMP_HOTEND 245 -#define PREHEAT_2_TEMP_BED 50 +#define PREHEAT_2_TEMP_HOTEND 210 +#define PREHEAT_2_TEMP_BED 60 #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** @@ -1267,7 +1312,7 @@ * Attention: EXPERIMENTAL. G-code arguments may change. * */ -#define NOZZLE_CLEAN_FEATURE +//#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) // Default number of pattern repetitions @@ -1277,8 +1322,8 @@ #define NOZZLE_CLEAN_TRIANGLES 3 // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { X_MIN_POS + 10, Y_MAX_POS - 9, (Z_MIN_POS + 0.5)} - #define NOZZLE_CLEAN_END_POINT { X_MIN_POS + 90, Y_MAX_POS - 0, (Z_MIN_POS + 0.5)} + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} // Circular pattern radius #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 @@ -1288,7 +1333,7 @@ #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT // Moves the nozzle to the initial position - //#define NOZZLE_CLEAN_GOBACK + #define NOZZLE_CLEAN_GOBACK #endif /** @@ -1333,11 +1378,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1365,19 +1410,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1402,7 +1434,16 @@ * * Use CRC checks and retries on the SD communication. */ -#define SD_CHECK_AND_RETRY +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS // // ENCODER SETTINGS @@ -1410,13 +1451,13 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 1 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 5 /** * Encoder Direction Options @@ -1468,12 +1509,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1491,40 +1538,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1533,28 +1546,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1562,39 +1553,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1641,6 +1621,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1661,25 +1718,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1695,6 +1738,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1710,6 +1760,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1717,7 +1795,7 @@ // @section extras // Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino -//#define FAST_PWM_FAN +#define FAST_PWM_FAN // Use software PWM to drive the fan, as for the heaters. This uses a very low frequency // which is not as annoying as with the hardware PWM. On the other hand, if this frequency @@ -1769,7 +1847,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1834,9 +1912,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h index 6d6c30a0b3..0d0e0c0c71 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -172,20 +172,22 @@ // Extruder runout prevention. // If the machine is idle and the temperature over MINTEMP // then extrude some filament every couple of SECONDS. -#define EXTRUDER_RUNOUT_PREVENT +//#define EXTRUDER_RUNOUT_PREVENT #if ENABLED(EXTRUDER_RUNOUT_PREVENT) - #define EXTRUDER_RUNOUT_MINTEMP 170 - #define EXTRUDER_RUNOUT_SECONDS 60 + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm #endif // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -204,12 +206,22 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 +#define FAN_KICKSTART_TIME 800 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -367,7 +384,7 @@ // Homing hits each endstop, retracts by these distances, then does a slower bump. #define X_HOME_BUMP_MM 5 #define Y_HOME_BUMP_MM 5 -#define Z_HOME_BUMP_MM 2 +#define Z_HOME_BUMP_MM 1 #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) #define QUICK_HOME // If homing includes X and Y, do a diagonal move initially @@ -393,10 +410,10 @@ // Default stepper release if idle. Set to 0 to deactivate. // Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. // Time can be set by M18 and M84. -#define DEFAULT_STEPPER_DEACTIVE_TIME 120 -#define DISABLE_INACTIVE_X true -#define DISABLE_INACTIVE_Y true -#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DEFAULT_STEPPER_DEACTIVE_TIME 300 +#define DISABLE_INACTIVE_X false +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false // set to false if the nozzle will fall down on your printed part when print has finished. #define DISABLE_INACTIVE_E true #define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate @@ -407,7 +424,7 @@ // @section lcd #if ENABLED(ULTIPANEL) - #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define MANUAL_FEEDRATE { 50*60, 50*60, 4*60, 60 } // Feedrates for manual moves along X, Y, Z, E from panel //#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder #endif @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -453,7 +486,15 @@ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 */ //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps -#define DIGIPOT_MOTOR_CURRENT { 150, 170, 180, 190, 180 } // Values 0-255 (bq ZUM Mega 3D (default): X = 150 [~1.17A]; Y = 170 [~1.33A]; Z = 180 [~1.41A]; E0 = 190 [~1.49A]) + +#define DIGIPOT_MOTOR_CURRENT { 170, 170, 180, 190, 180 } // Values 0-255 + // + // bq ZUM Mega 3D defaults: + // X = 150 [~1.17A] + // Y = 170 [~1.33A] + // Z = 180 [~1.41A] + // E0 = 190 [~1.49A] + //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis // Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) @@ -481,20 +522,17 @@ //=============================Additional Features=========================== //=========================================================================== -//#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly -//#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value -//#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 30 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 50 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value //#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ -//#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again // @section lcd // Include a page of printer information in the LCD Main Menu -#define LCD_INFO_MENU - -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS +//#define LCD_INFO_MENU // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -503,7 +541,7 @@ #define LCD_DECIMAL_SMALL_XY // The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 +#define LCD_TIMEOUT_TO_STATUS 60000 // Add an 'M73' G-code to set the current percentage //#define LCD_SET_PROGRESS_MANUALLY @@ -545,8 +583,8 @@ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). #define SD_DETECT_INVERTED - #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished - #define SD_FINISHED_RELEASECOMMAND "M104 S0\nM84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + #define SD_FINISHED_STEPPERRELEASE false // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "G27 P0" // You might want to keep the z enabled so your bed stays in place. // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. @@ -564,6 +602,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -604,7 +646,7 @@ #endif // This allows hosts to request long names for files and folders with M33 - #define LONG_FILENAME_HOST_SUPPORT + //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu //#define SCROLL_LONG_FILENAMES @@ -647,18 +689,18 @@ //#define DOGM_SD_PERCENT // Enable to save many cycles by drawing a hollow frame on the Info Screen - #define XYZ_HOLLOW_FRAME + //#define XYZ_HOLLOW_FRAME // Enable to save many cycles by drawing a hollow frame on Menu Screens #define MENU_HOLLOW_FRAME // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_BIG_EDIT_FONT + //#define USE_BIG_EDIT_FONT // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - #define USE_SMALL_INFOFONT + //#define USE_SMALL_INFOFONT // Enable this option and reduce the value to optimize screen updates. // The normal delay is 10µs. Use the lowest value that still gives a reliable display. @@ -710,16 +752,16 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) - //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! - #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. - //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. - #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. - // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 2 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1500 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif // @section extruder @@ -761,7 +803,7 @@ // // G2/G3 Arc Support // -#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections @@ -782,10 +824,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -801,7 +879,7 @@ // The number of linear motions that can be in the plan at any give time. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. #if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller #else #define BLOCK_BUFFER_SIZE 64 // maximize block buffer #endif @@ -847,13 +925,13 @@ // enter the serial receive buffer, so they cannot be blocked. // Currently handles M108, M112, M410 // Does not work on boards using AT90USB (USBCON) processors! -#define EMERGENCY_PARSER +//#define EMERGENCY_PARSER // Bad Serial-connections can miss a received command by sending an 'ok' // Therefore some clients abort after 30 seconds in a timeout. // Some other clients start sending commands while receiving a 'wait'. // This "wait" is only sent when the buffer is empty. 1 second is a good value here. -//#define NO_TIMEOUTS 1000 // Milliseconds +#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. #define ADVANCED_OK @@ -953,23 +1031,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1087,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1104,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1252,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1616,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1656,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/BQ/Hephestos_2/README.md b/Marlin/example_configurations/BQ/Hephestos_2/README.md index cbe9965eed..ab28487e2d 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/README.md +++ b/Marlin/example_configurations/BQ/Hephestos_2/README.md @@ -1,22 +1,29 @@ # Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2) -This configuration file is based on the original configuration file shipped with the heavily modified Marlin fork by BQ. The original firmware and configuration file can be found at [BQ Github repository](https://github.com/bq/Marlin). +Based on the original configuration file shipped with the heavily modified Marlin fork by BQ. +The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin). -NOTE: The look and feel of the Hephestos 2 while navigating the LCD menu will change by using the original Marlin firmware. +NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware. ## Changelog - * 2016/03/01 - Initial release + * 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af). + ABL Bilinear 5x5 is active by default. - * 2016/03/21 - Activated 4-point auto leveling by default - Updated miscellaneous z-probe values + * 2017/07/06 - Configuration updated to the latest Marlin version and added support for the + official BQ heated bed upgrade kit. - * 2016/06/21 - Disabled hot bed related options - Activated software endstops - SD printing now disables the heater when finished + * 2016/12/13 - Configuration updated to the latest Marlin version. - * 2016/07/13 - Update the `DEFAULT_AXIS_STEPS_PER_UNIT` for the Z axis - Increased the `DEFAULT_XYJERK` + * 2016/07/13 - Configuration updated to the latest Marlin version. - * 2016/12/13 - Configuration updated. + * 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now + disables the heater when finishes printing. - * 2017/07/06 - Configuration updated to the latest Marlin version. - Added support for the official BQ heated bed kit. + * 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values. + + * 2016/03/01 - The first release of Marlin's configuration file for the + BQ Hephestos 2 3D printer. + + +## Support +This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any +issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail. diff --git a/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h b/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h index 3ba0129ea9..0e771c0c7f 100644 --- a/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h +++ b/Marlin/example_configurations/BQ/Hephestos_2/_Bootscreen.h @@ -30,38 +30,39 @@ * http://marlinfw.org/tools/u8glib/converter.html */ -#define CUSTOM_BOOTSCREEN_BMPWIDTH 62 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 64 const unsigned char custom_start_bmp[] PROGMEM = { - B00000000,B00000000,B00000000,B00001111,B11110000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00011111,B11111000,B00000000,B00000000,B00000000, - B00000000,B00000011,B11000000,B00001111,B11110000,B00000111,B10000000,B00000000, - B00000000,B00000111,B11100000,B00000111,B11100000,B00001111,B11000000,B00000000, - B00000000,B00001111,B11110000,B00000011,B11000000,B00011111,B11100000,B00000000, - B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000, - B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000, - B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000, - B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000, - B00000000,B00011111,B11111000,B00000000,B00000000,B00111111,B11110000,B00000000, - B00000000,B00001111,B11110000,B00000000,B00000000,B00011111,B11100000,B00000000, - B00000000,B00000111,B11100000,B00000000,B00000000,B00001111,B11000000,B00000000, - B00000000,B00000011,B11000000,B00000000,B00000000,B00000111,B10000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000, + B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000, + B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000, + B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000, + B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000, + B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000, + B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, @@ -69,32 +70,31 @@ const unsigned char custom_start_bmp[] PROGMEM = { B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, + B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000, + B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000, + B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000, + B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000, + B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000, + B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000, + B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000, + B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000, + B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000, B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000, - B00011110,B00000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B00111111,B00000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B01111111,B10000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B11111111,B11000000,B00000000,B00000000,B11110000,B00000000,B00000000,B00000000, - B11111111,B11000000,B00000000,B00000000,B11110111,B11000000,B00011111,B10000000, - B11111111,B11000000,B00000000,B00000000,B11111111,B11110000,B01111111,B11000000, - B01111111,B10000000,B00000000,B00000000,B11111111,B11111000,B11111111,B11100000, - B00111111,B00000000,B00000000,B00000000,B11111100,B11111000,B11110000,B11111000, - B00011110,B00000000,B00000000,B00000000,B11111000,B01111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11110000,B00111101,B11100000,B01111000, - B00000000,B00000000,B00000000,B00000000,B11111000,B01111001,B11110000,B11111000, - B00000000,B00000000,B00000000,B00000000,B11111111,B11111000,B11111111,B11111000, - B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B01111111,B11111000, - B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111000, - B00000000,B00000000,B00000000,B00000000,B00000011,B10000000,B00001110,B01111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000, - B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01111000 + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000 }; diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration.h b/Marlin/example_configurations/BQ/WITBOX/Configuration.h index 59aed80214..d121193ff9 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -425,15 +427,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -510,10 +517,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -581,6 +631,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -631,6 +691,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -706,10 +767,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -733,6 +794,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -771,9 +833,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1018,8 +1077,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1309,11 +1368,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1341,19 +1400,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1380,6 +1426,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1444,12 +1499,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1467,40 +1528,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1509,28 +1536,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1538,39 +1543,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1617,6 +1611,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1637,25 +1708,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1671,6 +1728,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1686,6 +1750,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1745,7 +1837,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1810,9 +1902,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h index 8884850962..194d5d5afc 100644 --- a/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h +++ b/Marlin/example_configurations/BQ/WITBOX/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Cartesio/Configuration.h b/Marlin/example_configurations/Cartesio/Configuration.h index 6cced178b9..e2fd74b562 100644 --- a/Marlin/example_configurations/Cartesio/Configuration.h +++ b/Marlin/example_configurations/Cartesio/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -202,11 +202,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -260,6 +260,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -269,6 +270,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -300,7 +302,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 -1 @@ -436,15 +438,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -519,12 +526,55 @@ #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -592,6 +642,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -642,6 +702,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -717,10 +778,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -744,6 +805,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -782,9 +844,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1029,8 +1088,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1320,11 +1379,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1352,19 +1411,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1391,6 +1437,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1455,12 +1510,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #define LCD_FEEDBACK_FREQUENCY_HZ 1000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1478,40 +1539,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1520,28 +1547,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -#define REPRAPWORLD_KEYPAD -#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1549,39 +1554,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1628,6 +1622,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1648,25 +1719,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1682,6 +1739,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1697,6 +1761,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1756,7 +1848,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1821,9 +1913,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Cartesio/Configuration_adv.h b/Marlin/example_configurations/Cartesio/Configuration_adv.h index 6919035765..e064cbba8b 100644 --- a/Marlin/example_configurations/Cartesio/Configuration_adv.h +++ b/Marlin/example_configurations/Cartesio/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" #define TEMP_SENSOR_AD595_OFFSET 3.0 #define TEMP_SENSOR_AD595_GAIN 2.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration.h b/Marlin/example_configurations/Creality/CR-10/Configuration.h index f92ac558d0..b147cf4bdf 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 1000 @@ -532,10 +539,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -576,7 +626,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 5000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } /** * Default Acceleration (change/s) change = mm/s @@ -603,6 +653,16 @@ #define DEFAULT_ZJERK 2.7 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -653,6 +713,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -728,10 +789,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -755,6 +816,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -793,9 +855,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1040,8 +1099,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1331,11 +1390,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1363,19 +1422,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1402,6 +1448,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1466,12 +1521,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1489,40 +1550,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1531,28 +1558,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1560,39 +1565,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1639,6 +1633,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1659,25 +1730,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1693,6 +1750,13 @@ // #define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1708,6 +1772,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1767,7 +1859,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1832,9 +1924,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h index 4b98513a68..25bb874f01 100755 --- a/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1598,27 +1611,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1636,4 +1651,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration.h b/Marlin/example_configurations/Creality/CR-10S/Configuration.h index 937dad1896..b531717d35 100644 --- a/Marlin/example_configurations/Creality/CR-10S/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -125,6 +125,10 @@ // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD #define MOTHERBOARD BOARD_RAMPS_14_EFB + #define PIN_EXP1 65 // A11 + #define PIN_EXP2 66 // A12 + #define PIN_EXP3 11 // SERVO0_PIN + #define PIN_EXP4 12 // PS_ON_PIN #endif // Optional custom name for your RepStrap or other custom machine @@ -201,11 +205,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +263,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +273,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +305,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +443,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 435 @@ -522,10 +533,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -566,7 +620,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 10000 } /** * Default Acceleration (change/s) change = mm/s @@ -593,6 +647,16 @@ #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +707,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +783,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +810,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +849,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1031,8 +1094,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1322,11 +1385,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1354,19 +1417,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1393,6 +1443,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1457,12 +1516,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1480,40 +1545,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1522,28 +1553,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1551,39 +1560,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1630,6 +1628,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1650,25 +1725,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1684,6 +1745,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1699,6 +1767,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1758,7 +1854,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1823,9 +1919,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h index a24d470f60..1dc96c8023 100644 --- a/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10S/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -938,6 +1008,7 @@ #define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. #define FILAMENT_CHANGE_ALERT_BEEPS 6 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. @@ -952,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1019,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1054,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1217,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1594,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1632,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h index c956a55a71..30264c6def 100644 --- a/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h +++ b/Marlin/example_configurations/Creality/CR-10S/_Statusscreen.h @@ -36,7 +36,10 @@ #define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) -#define FAN_ANIM_FRAMES 3 +// Can also be overridden in Configuration.h +#ifndef FAN_ANIM_FRAMES + #define FAN_ANIM_FRAMES 3 +#endif #define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105) #define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27) diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h index 5478a8b87e..c109fd1721 100644 --- a/Marlin/example_configurations/Creality/CR-10mini/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration.h @@ -46,7 +46,7 @@ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -96,7 +96,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -210,11 +210,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -268,6 +268,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -277,6 +278,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -308,7 +310,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -456,15 +458,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 1000 @@ -541,10 +548,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -585,7 +635,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 5000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } /** * Default Acceleration (change/s) change = mm/s @@ -612,6 +662,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -662,6 +722,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -737,10 +798,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -764,6 +825,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -802,9 +864,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1049,8 +1108,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1340,11 +1399,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1372,19 +1431,6 @@ */ #define DISPLAY_CHARSET_HD44780 WESTERN -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1411,6 +1457,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1475,12 +1530,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1498,40 +1559,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1540,28 +1567,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1569,39 +1574,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1648,6 +1642,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1668,25 +1739,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1702,6 +1759,13 @@ // #define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1717,6 +1781,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1776,7 +1868,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1841,9 +1933,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h index 92caf17670..b3bac8ae70 100644 --- a/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-10mini/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration.h b/Marlin/example_configurations/Creality/CR-8/Configuration.h index 7685e36fa3..3525a10dcc 100644 --- a/Marlin/example_configurations/Creality/CR-8/Configuration.h +++ b/Marlin/example_configurations/Creality/CR-8/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -307,6 +309,7 @@ #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 @@ -446,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 190 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 500 @@ -531,10 +539,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -602,6 +653,16 @@ #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -652,6 +713,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -681,6 +743,9 @@ * readings with inductive probes and piezo sensors. */ //#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -724,10 +789,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -751,6 +816,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -789,9 +855,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1036,8 +1099,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1327,11 +1390,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1359,19 +1422,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1398,6 +1448,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1462,12 +1521,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1485,40 +1550,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1527,28 +1558,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1556,39 +1565,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1635,6 +1633,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1655,25 +1730,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1689,6 +1750,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1704,6 +1772,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1763,7 +1859,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1828,9 +1924,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h index e183551f3b..c8d653fdd7 100644 --- a/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/CR-8/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -230,6 +242,7 @@ #define E2_AUTO_FAN_PIN -1 #define E3_AUTO_FAN_PIN -1 #define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 #define EXTRUDER_AUTO_FAN_TEMPERATURE 50 #define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed @@ -318,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -428,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -492,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -563,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -781,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -952,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1019,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1054,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1217,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1594,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1632,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration.h b/Marlin/example_configurations/Creality/Ender-2/Configuration.h index d0dd4d785b..1110e74204 100644 --- a/Marlin/example_configurations/Creality/Ender-2/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -441,15 +443,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -526,10 +533,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -597,6 +647,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -647,6 +707,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -722,10 +783,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -749,6 +810,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -787,9 +849,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -817,8 +876,8 @@ // @section machine // The size of the print bed -#define X_BED_SIZE 320 -#define Y_BED_SIZE 320 +#define X_BED_SIZE 150 +#define Y_BED_SIZE 150 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -826,7 +885,7 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 420 +#define Z_MAX_POS 200 /** * Software Endstops @@ -1034,8 +1093,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1325,11 +1384,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1357,19 +1416,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1396,6 +1442,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1460,12 +1515,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1483,40 +1544,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1525,28 +1552,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1554,39 +1559,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1633,6 +1627,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1653,25 +1724,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1687,6 +1744,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1702,6 +1766,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1761,7 +1853,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1826,9 +1918,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h index 87e54ed3ef..b5708a5f79 100644 --- a/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/Ender-2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration.h b/Marlin/example_configurations/Creality/Ender-3/Configuration.h new file mode 100644 index 0000000000..8b92239cf4 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(thisiskeithb, Ender-3)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI_CREALITY +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Ender-3" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 125 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + // Creality Ender-3 + #define DEFAULT_Kp 21.73 + #define DEFAULT_Ki 1.54 + #define DEFAULT_Kd 76.55 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 93 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 500, 500, 100, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 500 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 250 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (20*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 185 +#define PREHEAT_1_TEMP_BED 45 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 0 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 WESTERN + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h new file mode 100644 index 0000000000..4e2dd4ec54 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 0} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Creality/Ender-3/README.md b/Marlin/example_configurations/Creality/Ender-3/README.md new file mode 100644 index 0000000000..e64f3ec3d2 --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/README.md @@ -0,0 +1,18 @@ +# Creality Ender Support + +This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because + +* 1.0.0 had very different serial output in `setup()` and overall code structure. +* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`. + +Configurations were found by seeing what code was compiled into the firmware, and constants used there. + +For U8Glib, at least version 1.14 and at most 1.17 is used, because + +* 1.12 didn't have the extra speed argument to u8g_InitCom. +* 1.13 didn't have the soft reset instruction for UC1701 initialization. +* 1.18 has a new directory structure. + +## Bitmaps + +The bootscreen and custom status screens come from Creality's firmware. diff --git a/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h b/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h new file mode 100644 index 0000000000..11be930e9c --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/_Bootscreen.h @@ -0,0 +1,96 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Boot Screen bitmap + * + * Place this file in the root with your configuration files + * and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define CUSTOM_BOOTSCREEN_TIMEOUT 1000 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 81 +#define CUSTOM_BOOTSCREEN_INVERTED + +const unsigned char custom_start_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111, + B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111, + B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111, + B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111, + B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111, + B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111, + B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111, + B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111, + B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111, + B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111, + B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111, + B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111, + B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111, + B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111, + B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111, + B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111, + B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111, + B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111, + B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111, + B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111, + B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111, + B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111, + B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111 +}; diff --git a/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h b/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h new file mode 100644 index 0000000000..95e8298c3e --- /dev/null +++ b/Marlin/example_configurations/Creality/Ender-3/_Statusscreen.h @@ -0,0 +1,130 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ + +#define STATUS_SCREENWIDTH 128 +#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20) +#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) +#define STATUS_SCREEN_FAN_TEXT_X 103 + +//============================================ + +#if HOTENDS < 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000 + }; + +#else // HOTENDS >= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000, + B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + +#endif // HOTENDS >= 2 diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration.h b/Marlin/example_configurations/Creality/Ender-4/Configuration.h index 07de606990..c525557807 100644 --- a/Marlin/example_configurations/Creality/Ender-4/Configuration.h +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 190 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 500 @@ -532,10 +539,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -576,7 +626,7 @@ * Override with M201 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 200, 10000 } +#define DEFAULT_MAX_ACCELERATION { 500, 500, 200, 10000 } /** * Default Acceleration (change/s) change = mm/s @@ -603,6 +653,16 @@ #define DEFAULT_ZJERK 2.4 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -653,6 +713,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -728,10 +789,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -755,6 +816,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -793,9 +855,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1040,8 +1099,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1331,11 +1390,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1363,19 +1422,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1402,6 +1448,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1466,12 +1521,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1489,40 +1550,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1531,28 +1558,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1560,39 +1565,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1639,6 +1633,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1659,25 +1730,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1693,6 +1750,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1708,6 +1772,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1767,7 +1859,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1832,9 +1924,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h index cc6fe60f68..c8d653fdd7 100644 --- a/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h +++ b/Marlin/example_configurations/Creality/Ender-4/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view #define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/Configuration.h b/Marlin/example_configurations/Felix/Configuration.h index a0816de203..6dd0658894 100644 --- a/Marlin/example_configurations/Felix/Configuration.h +++ b/Marlin/example_configurations/Felix/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -418,15 +420,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -503,10 +510,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -575,6 +625,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -625,6 +685,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -700,10 +761,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -727,6 +788,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -765,9 +827,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1012,8 +1071,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1303,11 +1362,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1335,19 +1394,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1374,6 +1420,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1438,12 +1493,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1461,40 +1522,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1503,28 +1530,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1532,39 +1537,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1611,6 +1605,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1631,25 +1702,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1665,6 +1722,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1680,6 +1744,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1739,7 +1831,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1804,9 +1896,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Felix/Configuration_adv.h b/Marlin/example_configurations/Felix/Configuration_adv.h index 1ee9762148..e4deacec09 100644 --- a/Marlin/example_configurations/Felix/Configuration_adv.h +++ b/Marlin/example_configurations/Felix/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Felix/DUAL/Configuration.h b/Marlin/example_configurations/Felix/DUAL/Configuration.h index 140a6d074a..4fc761aeeb 100644 --- a/Marlin/example_configurations/Felix/DUAL/Configuration.h +++ b/Marlin/example_configurations/Felix/DUAL/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 1 @@ -418,15 +420,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -503,10 +510,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -575,6 +625,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -625,6 +685,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -700,10 +761,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -727,6 +788,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -765,9 +827,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1012,8 +1071,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1303,11 +1362,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1335,19 +1394,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1374,6 +1420,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1438,12 +1493,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1461,40 +1522,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1503,28 +1530,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1532,39 +1537,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1611,6 +1605,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1631,25 +1702,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1665,6 +1722,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1680,6 +1744,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1739,7 +1831,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1804,9 +1896,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h index 75cae43727..f09bd997ab 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -442,15 +444,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -527,10 +534,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -599,6 +649,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 4.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -649,6 +709,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -724,10 +785,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 7500 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -751,6 +812,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 3 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 3 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -789,9 +851,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -964,10 +1023,10 @@ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION (X_MIN_POS + 33) - //#define RIGHT_PROBE_BED_POSITION (X_MAX_POS - 37) - //#define FRONT_PROBE_BED_POSITION (Y_MIN_POS + 7) - //#define BACK_PROBE_BED_POSITION (Y_MAX_POS - 12) + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) // Probe along the Y axis, advancing X after each column //#define PROBE_Y_FIRST @@ -990,17 +1049,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - #define PROBE_PT_1_X 39 - #define PROBE_PT_1_Y 170 - #define PROBE_PT_2_X 39 - #define PROBE_PT_2_Y 10 - #define PROBE_PT_3_X 170 - #define PROBE_PT_3_Y 10 - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1011,14 +1059,7 @@ #define MESH_INSET 0 // Set Mesh bounds as an inset region of the bed #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y 10 - - #define PROBE_PT_1_X 45 // Probing points for 3-Point leveling of the mesh - #define PROBE_PT_1_Y 170 - #define PROBE_PT_2_X 45 - #define PROBE_PT_2_Y 25 - #define PROBE_PT_3_X 180 - #define PROBE_PT_3_Y 25 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 @@ -1045,17 +1086,17 @@ * Override if the automatically selected points are inadequate. */ #if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 45 + #define PROBE_PT_1_Y 170 + #define PROBE_PT_2_X 45 + #define PROBE_PT_2_Y 25 + #define PROBE_PT_3_X 180 + #define PROBE_PT_3_Y 25 #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1345,11 +1386,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1377,19 +1418,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1416,6 +1444,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1480,12 +1517,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1503,40 +1546,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1545,28 +1554,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1574,39 +1561,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1653,6 +1629,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1673,25 +1726,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1707,6 +1746,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1722,6 +1768,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1781,7 +1855,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1846,9 +1920,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 500, 500 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter #define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h index 4b73b737ea..e71dfdf116 100644 --- a/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h +++ b/Marlin/example_configurations/FolgerTech/i3-2020/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,11 +1608,8 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ #define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) @@ -1615,15 +1625,20 @@ //#define MAX7219_DIN_PIN 34 // for RAMPS E1 //#define MAX7219_LOAD_PIN 36 // for RAMPS E1 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1641,4 +1656,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h index f497d01bdc..015129f8da 100644 --- a/Marlin/example_configurations/Geeetech/GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -452,15 +454,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -537,10 +544,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -608,6 +658,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -658,6 +718,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -733,10 +794,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -760,6 +821,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -798,9 +860,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1045,8 +1104,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1336,11 +1395,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1368,19 +1427,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1407,6 +1453,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1471,12 +1526,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1494,40 +1555,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1536,28 +1563,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1565,39 +1570,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1644,6 +1638,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1664,25 +1735,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1698,6 +1755,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1713,6 +1777,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1772,7 +1864,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1837,9 +1929,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE /** diff --git a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h index 90bc590ab3..d997f76bcb 100644 --- a/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h +++ b/Marlin/example_configurations/Geeetech/I3_Pro_X-GT2560/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 300 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 4.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 6 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #define LCD_FEEDBACK_FREQUENCY_HZ 1000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h index 419bf4d254..f838f8563f 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -452,15 +454,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -537,10 +544,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -608,6 +658,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -659,6 +719,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -734,10 +795,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST (20*60) -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -761,6 +822,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -799,9 +861,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1046,8 +1105,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1337,11 +1396,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1369,19 +1428,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1408,6 +1454,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1472,12 +1527,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 #define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1495,40 +1556,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1537,28 +1564,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1566,39 +1571,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1645,6 +1639,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1665,25 +1736,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1699,6 +1756,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1714,6 +1778,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1773,7 +1865,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1838,9 +1930,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h index 10ba539c24..3d071ad02c 100644 --- a/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -452,15 +454,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -537,10 +544,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -608,6 +658,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -658,6 +718,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -686,7 +747,7 @@ * These options are most useful for the BLTouch probe, but may also improve * readings with inductive probes and piezo sensors. */ -#define PROBING_HEATERS_OFF // Turn heaters off when probing +//#define PROBING_HEATERS_OFF // Turn heaters off when probing #if ENABLED(PROBING_HEATERS_OFF) //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) #endif @@ -733,10 +794,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST (20*60) -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -760,6 +821,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -798,9 +860,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1045,8 +1104,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1336,11 +1395,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1368,19 +1427,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1407,6 +1453,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1471,12 +1526,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 #define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1494,40 +1555,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1536,28 +1563,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1565,39 +1570,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1644,6 +1638,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1664,25 +1735,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1698,6 +1755,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1713,6 +1777,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1772,7 +1864,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1837,9 +1929,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h new file mode 100644 index 0000000000..e47a104c98 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Pro C" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 2 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +#define HOTEND_OFFSET_X {0.0, 32.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 1 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR false +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h new file mode 100644 index 0000000000..e03367a654 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro C/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h new file mode 100644 index 0000000000..111be839c0 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration.h @@ -0,0 +1,1920 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Phr3d13, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_GT2560_REV_A_PLUS +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Pro W" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 32.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 1 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 1 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 2560, 95 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 10.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.3 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 8000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR false + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 200 +#define Y_BED_SIZE 200 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS 0 +#define Y_MIN_POS 0 +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE +#define Y_MAX_POS Y_BED_SIZE +#define Z_MAX_POS 180 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 200 +#define PREHEAT_1_TEMP_BED 65 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 235 +#define PREHEAT_2_TEMP_BED 95 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h new file mode 100644 index 0000000000..e03367a654 --- /dev/null +++ b/Marlin/example_configurations/Geeetech/Prusa i3 Pro W/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + #define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h index ea7fd542ac..68c434e0e3 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -441,15 +443,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -518,18 +525,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -597,6 +647,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -647,6 +707,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -722,10 +783,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -749,6 +810,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -787,9 +849,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1034,8 +1093,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1325,11 +1384,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1357,19 +1416,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1396,6 +1442,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1460,12 +1515,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1483,40 +1544,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1525,28 +1552,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1554,39 +1559,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1633,6 +1627,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1653,25 +1724,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1687,6 +1744,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1702,6 +1766,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1761,7 +1853,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1826,9 +1918,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h index c393699428..542df5b087 100644 --- a/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h +++ b/Marlin/example_configurations/Infitary/i3-M508/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration.h b/Marlin/example_configurations/JGAurora/A5/Configuration.h index 14d3923bbc..3c152e1700 100644 --- a/Marlin/example_configurations/JGAurora/A5/Configuration.h +++ b/Marlin/example_configurations/JGAurora/A5/Configuration.h @@ -42,7 +42,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -92,7 +92,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -206,11 +206,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -264,6 +264,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -273,6 +274,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -304,14 +306,14 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 -#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on centre of bed within +/- 1 degC. +#define TEMP_SENSOR_BED 1 // measured to be satisfactorily accurate on center of bed within +/- 1 degC. #define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 @@ -449,15 +451,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 1000 @@ -526,18 +533,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -605,6 +655,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -655,6 +715,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -730,10 +791,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -757,6 +818,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -795,9 +857,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1041,8 +1100,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1332,11 +1391,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1364,19 +1423,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1403,6 +1449,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1467,12 +1522,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1490,40 +1551,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1532,28 +1559,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1561,39 +1566,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1640,6 +1634,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1660,25 +1731,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1694,6 +1751,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1709,6 +1773,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1768,7 +1860,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1833,9 +1925,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h index eb7446c92d..8568e5e457 100644 --- a/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h +++ b/Marlin/example_configurations/JGAurora/A5/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Malyan/M150/Configuration.h b/Marlin/example_configurations/Malyan/M150/Configuration.h index f5dbe14fb8..cf8897b15d 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration.h @@ -42,7 +42,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -92,7 +92,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -206,11 +206,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -264,6 +264,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -273,6 +274,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -304,7 +306,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -445,15 +447,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -523,18 +530,61 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -613,6 +663,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -663,6 +723,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -742,10 +803,10 @@ // X and Y axis travel speed (mm/m) between probes //#define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) //#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point //#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -769,6 +830,7 @@ */ //#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow //#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -807,9 +869,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1012,17 +1071,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - #define PROBE_PT_1_X 50 - #define PROBE_PT_1_Y 150 - #define PROBE_PT_2_X 50 - #define PROBE_PT_2_Y 50 - #define PROBE_PT_3_X 150 - #define PROBE_PT_3_Y 50 - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1060,17 +1108,17 @@ * Override if the automatically selected points are inadequate. */ #if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 50 + #define PROBE_PT_1_Y 150 + #define PROBE_PT_2_X 50 + #define PROBE_PT_2_Y 50 + #define PROBE_PT_3_X 150 + #define PROBE_PT_3_Y 50 #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1360,11 +1408,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1392,19 +1440,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1431,6 +1466,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1495,12 +1539,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1518,40 +1568,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1560,28 +1576,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1589,39 +1583,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1668,6 +1651,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1688,25 +1748,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1722,6 +1768,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1737,6 +1790,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1796,7 +1877,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1861,9 +1942,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h index 57f3f6993f..a7a2824bcf 100644 --- a/Marlin/example_configurations/Malyan/M150/Configuration_adv.h +++ b/Marlin/example_configurations/Malyan/M150/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h index a9c245d4e3..b11a3dc1a1 100644 --- a/Marlin/example_configurations/Micromake/C1/basic/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/basic/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -597,6 +647,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -647,6 +707,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -722,10 +783,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -749,6 +810,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -787,9 +849,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1034,8 +1093,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ #define LCD_BED_LEVELING @@ -1325,11 +1384,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1357,19 +1416,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1396,6 +1442,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1460,12 +1515,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1483,40 +1544,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1525,28 +1552,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1554,39 +1559,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1633,6 +1627,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1653,25 +1724,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1687,6 +1744,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1702,6 +1766,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1761,7 +1853,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1826,9 +1918,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h index c8858dbc16..86ca7f4fc0 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -516,16 +523,59 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -597,6 +647,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -647,6 +707,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -722,10 +783,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -749,6 +810,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -787,9 +849,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1034,8 +1093,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1325,11 +1384,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1357,19 +1416,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1396,6 +1442,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1460,12 +1515,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 100 #define LCD_FEEDBACK_FREQUENCY_HZ 1000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1483,40 +1544,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1525,28 +1552,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1554,39 +1559,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1633,6 +1627,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1653,25 +1724,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1687,6 +1744,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1702,6 +1766,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1761,7 +1853,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1826,9 +1918,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h index c7ad569b8e..5d548ffe20 100644 --- a/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h +++ b/Marlin/example_configurations/Micromake/C1/enhanced/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h index 2cfb844491..6584098c50 100644 --- a/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h +++ b/Marlin/example_configurations/RepRapPro/Huxley/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -633,6 +683,16 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -683,6 +743,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -712,6 +773,9 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * readings with inductive probes and piezo sensors. */ //#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif //#define PROBING_FANS_OFF // Turn fans off when probing //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors @@ -755,10 +819,10 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -782,6 +846,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -820,9 +885,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1076,8 +1138,8 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1367,11 +1429,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1399,19 +1461,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1438,6 +1487,15 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1502,12 +1560,18 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1525,40 +1589,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1567,28 +1597,6 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1596,39 +1604,28 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1675,6 +1672,83 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1695,25 +1769,11 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1729,6 +1789,13 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1744,6 +1811,34 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1803,7 +1898,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1868,9 +1963,7 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h index 17ada4f86b..750e11375e 100644 --- a/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h +++ b/Marlin/example_configurations/RepRapWorld/Megatronics/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -520,12 +527,55 @@ #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -#define REPRAPWORLD_KEYPAD -#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +#define REPRAPWORLD_KEYPAD +#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RigidBot/Configuration.h b/Marlin/example_configurations/RigidBot/Configuration.h index 70fb32c493..b41d1e0e66 100644 --- a/Marlin/example_configurations/RigidBot/Configuration.h +++ b/Marlin/example_configurations/RigidBot/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -204,11 +204,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -262,6 +262,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -271,6 +272,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -302,7 +304,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5 #define TEMP_SENSOR_1 0 @@ -433,15 +435,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -516,12 +523,55 @@ #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -591,6 +641,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -641,6 +701,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -716,10 +777,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -743,6 +804,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -781,9 +843,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1028,8 +1087,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1319,11 +1378,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1351,19 +1410,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1390,6 +1436,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1454,12 +1509,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1477,40 +1538,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1519,30 +1546,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -// RigidBoard: To rewire this for a RigidBot see http://rigidtalk.com/wiki/index.php?title=LCD_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1553,28 @@ #define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1621,85 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +// RigidBoard: To rewire this for a RigidBot see http://rigidtalk.com/wiki/index.php?title=LCD_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/RigidBot/Configuration_adv.h b/Marlin/example_configurations/RigidBot/Configuration_adv.h index e6a44267bb..98e3f74326 100644 --- a/Marlin/example_configurations/RigidBot/Configuration_adv.h +++ b/Marlin/example_configurations/RigidBot/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/SCARA/Configuration.h b/Marlin/example_configurations/SCARA/Configuration.h index 699aabecfa..9425e9a240 100644 --- a/Marlin/example_configurations/SCARA/Configuration.h +++ b/Marlin/example_configurations/SCARA/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -72,8 +72,9 @@ //#define MAKERARM_SCARA #if ENABLED(MORGAN_SCARA) || ENABLED(MAKERARM_SCARA) + //#define DEBUG_SCARA_KINEMATICS - //#define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly + #define SCARA_FEEDRATE_SCALING // Convert XY feedrate from mm/s to degrees/s on the fly // If movement is choppy try lowering this value #define SCARA_SEGMENTS_PER_SECOND 200 @@ -117,7 +118,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -231,11 +232,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -289,6 +290,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -298,6 +300,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -329,7 +332,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -449,15 +452,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -532,12 +540,55 @@ #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -605,6 +656,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 3.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -655,6 +716,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -730,10 +792,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -757,6 +819,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -795,9 +858,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1042,8 +1102,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1333,11 +1393,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1365,19 +1425,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1404,6 +1451,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1468,12 +1524,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1491,40 +1553,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1533,28 +1561,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1562,39 +1568,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1641,6 +1636,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1661,25 +1733,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1695,6 +1753,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1710,6 +1775,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1769,7 +1862,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1834,9 +1927,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/SCARA/Configuration_adv.h b/Marlin/example_configurations/SCARA/Configuration_adv.h index a203253afe..60f11d9fbb 100644 --- a/Marlin/example_configurations/SCARA/Configuration_adv.h +++ b/Marlin/example_configurations/SCARA/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Sanguinololu/Configuration.h b/Marlin/example_configurations/Sanguinololu/Configuration.h index 5a3a1a6010..1beddbc90b 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -624,6 +674,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -674,6 +734,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -749,10 +810,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -776,6 +837,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -814,9 +876,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1061,8 +1120,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1352,11 +1411,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1384,19 +1443,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1423,6 +1469,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1487,12 +1542,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1510,40 +1571,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1552,28 +1579,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1581,39 +1586,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1660,6 +1654,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1680,25 +1751,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1714,6 +1771,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1729,6 +1793,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1788,7 +1880,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1853,9 +1945,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h index e3d4ccbc5a..519416a473 100644 --- a/Marlin/example_configurations/Sanguinololu/Configuration_adv.h +++ b/Marlin/example_configurations/Sanguinololu/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/TinyBoy2/Configuration.h b/Marlin/example_configurations/TinyBoy2/Configuration.h index 0302db9012..5367c9f1a0 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 /** * Sample configuration file for TinyBoy2 L10/L16 @@ -103,7 +103,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -223,11 +223,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -281,6 +281,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -290,6 +291,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -321,7 +323,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -487,15 +489,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -566,17 +573,60 @@ // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -644,6 +694,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -694,6 +754,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -769,10 +830,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -796,6 +857,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -1086,8 +1148,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1377,11 +1439,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1409,19 +1471,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1448,6 +1497,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1512,12 +1570,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1535,40 +1599,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1577,28 +1607,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1606,39 +1614,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1685,6 +1682,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1705,25 +1779,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // #define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1739,6 +1799,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1754,6 +1821,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1813,7 +1908,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1878,9 +1973,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h index 62adf41fa1..76d50c2c0c 100644 --- a/Marlin/example_configurations/TinyBoy2/Configuration_adv.h +++ b/Marlin/example_configurations/TinyBoy2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Tronxy/X1/Configuration.h b/Marlin/example_configurations/Tronxy/X1/Configuration.h index befd0e2b68..2c2b314ba7 100644 --- a/Marlin/example_configurations/Tronxy/X1/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X1/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 11 #define TEMP_SENSOR_1 0 @@ -357,7 +359,7 @@ #define PIDTEMP #define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current -#define PID_K1 0.95 // Smoothing factor within the PID +#define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. //#define PID_DEBUG // Sends debug data to the serial port. @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -514,18 +521,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -941,7 +1000,7 @@ /** * Enable the G26 Mesh Validation Pattern tool. */ - #define G26_MESH_VALIDATION // Enable G26 mesh validation + #define G26_MESH_VALIDATION #if ENABLED(G26_MESH_VALIDATION) #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // #define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration.h b/Marlin/example_configurations/Tronxy/X3A/Configuration.h new file mode 100644 index 0000000000..5aea54f768 --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X3A/Configuration.h @@ -0,0 +1,1924 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(Schullebernd, Tronxy X3A)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_MELZI //63 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Tronxy X3A" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 6 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 501 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 130 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + #define DEFAULT_Kp 22.2 + #define DEFAULT_Ki 1.08 + #define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 210 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +#define USE_XMIN_PLUG +#define USE_YMIN_PLUG +#define USE_ZMIN_PLUG +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 100, 100, 400, 90 } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 400, 400, 4, 50 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1500, 5000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 1000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 15.0 +#define DEFAULT_YJERK 15.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER -32 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -0.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 50 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR -1 +#define Y_HOME_DIR -1 +#define Z_HOME_DIR -1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE 220 +#define Y_BED_SIZE 220 + +// Tronxy X3A specific offsets +#define TRONXY_X_BED_OFFSET -17 +#define TRONXY_Y_BED_OFFSET -25 + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS TRONXY_X_BED_OFFSET +#define Y_MIN_POS TRONXY_Y_BED_OFFSET +#define Z_MIN_POS 0 +#define X_MAX_POS X_BED_SIZE - (2 * TRONXY_X_BED_OFFSET) +#define Y_MAX_POS Y_BED_SIZE - (TRONXY_Y_BED_OFFSET + 5) +#define Z_MAX_POS 316 + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + #define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 3 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) + //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE + //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + //#define PROBE_PT_1_X 15 + //#define PROBE_PT_1_Y 180 + //#define PROBE_PT_2_X 15 + //#define PROBE_PT_2_Y 20 + //#define PROBE_PT_3_X 170 + //#define PROBE_PT_3_Y 20 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +//#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +#define MANUAL_X_HOME_POS TRONXY_X_BED_OFFSET // The X3A has a standard X offset (17mm) between the left endstop and bed left bed edge +#define MANUAL_Y_HOME_POS TRONXY_Y_BED_OFFSET // The X3A has a standard Y offset (25mm) between the y endstop and the front bet edge +#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (100*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +//#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 210 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 225 +#define PREHEAT_2_TEMP_BED 85 +#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h new file mode 100644 index 0000000000..01ec082466 --- /dev/null +++ b/Marlin/example_configurations/Tronxy/X3A/Configuration_adv.h @@ -0,0 +1,1654 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 40 // Seconds + #define WATCH_TEMP_INCREASE 10 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 10 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 2 +#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 120 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Tronxy/X5S/Configuration.h b/Marlin/example_configurations/Tronxy/X5S/Configuration.h index 0f7777ca5b..e34a5aee02 100644 --- a/Marlin/example_configurations/Tronxy/X5S/Configuration.h +++ b/Marlin/example_configurations/Tronxy/X5S/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 600 @@ -514,18 +521,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ #define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1078,8 +1137,8 @@ #define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_MIN_POS + X_MAX_POS) / 2) // X point for Z homing when homing all axis (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_MIN_POS + Y_MAX_POS) / 2) // Y point for Z homing when homing all axis (G28). + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). #endif // Homing speeds (mm/m) @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1914,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Tronxy/XY100/Configuration.h b/Marlin/example_configurations/Tronxy/XY100/Configuration.h index fa7c86d3b0..09d623d802 100644 --- a/Marlin/example_configurations/Tronxy/XY100/Configuration.h +++ b/Marlin/example_configurations/Tronxy/XY100/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -448,15 +450,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -525,18 +532,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -604,6 +654,16 @@ #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -654,6 +714,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -729,10 +790,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -756,6 +817,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -794,9 +856,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1041,8 +1100,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1332,11 +1391,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1364,19 +1423,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1403,6 +1449,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1467,12 +1522,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1490,40 +1551,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1532,28 +1559,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1561,39 +1566,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // #define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1640,6 +1634,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1660,25 +1731,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1694,6 +1751,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1709,6 +1773,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1768,7 +1860,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1833,9 +1925,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration.h b/Marlin/example_configurations/Velleman/K8200/Configuration.h index 0ad48766e7..17c1282cd1 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 /** * Sample configuration file for Vellemann K8200 @@ -103,7 +103,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -221,11 +221,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -279,6 +279,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -288,6 +289,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -319,7 +321,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -467,15 +469,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -552,10 +559,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -622,6 +672,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -672,6 +732,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -747,10 +808,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -774,6 +835,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -812,9 +874,6 @@ #define INVERT_Y_DIR false // K8200: false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1060,8 +1119,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1354,11 +1413,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1386,19 +1445,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE // K8200: for Display VM8201 // this is the most common hardware -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1425,6 +1471,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1489,12 +1544,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1512,40 +1573,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1554,28 +1581,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1583,39 +1588,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1662,6 +1656,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1682,25 +1753,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1716,6 +1773,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1733,6 +1797,34 @@ #endif // K8200_VM8201 +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1792,7 +1884,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1857,9 +1949,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h index 2cad50b816..3c35de8645 100644 --- a/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8200/Configuration_adv.h @@ -41,7 +41,7 @@ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -195,10 +195,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -332,15 +334,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -442,8 +449,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -506,9 +529,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -577,6 +597,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -795,10 +819,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -966,23 +1026,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1033,34 +1082,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1068,22 +1099,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1231,32 +1247,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1608,27 +1611,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1646,4 +1651,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Configuration.h index 35bdceb7ba..e71916ed89 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.5 #define DEFAULT_EJERK 20.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -814,11 +873,11 @@ // The size of the print bed #define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 20 +#define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1767,13 +1859,14 @@ * LED Type. Enable only one of the following two options. * */ -//#define RGB_LED +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 //#define RGBW_LED #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) - #define RGB_LED_R_PIN 34 - #define RGB_LED_G_PIN 43 - #define RGB_LED_B_PIN 35 + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 #define RGB_LED_W_PIN -1 #endif @@ -1822,9 +1915,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h index da991c7748..527c82b261 100644 --- a/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h +++ b/Marlin/example_configurations/Velleman/K8400/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h index f05fdc2ffd..f5fb4e7ce2 100644 --- a/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h +++ b/Marlin/example_configurations/Velleman/K8400/Dual-head/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 5 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 20.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -814,11 +873,11 @@ // The size of the print bed #define X_BED_SIZE 200 -#define Y_BED_SIZE 200 +#define Y_BED_SIZE 180 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 -#define Y_MIN_POS 20 +#define Y_MIN_POS 0 #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1479,40 +1540,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1548,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1555,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1623,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1720,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1740,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1762,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1849,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1767,13 +1859,14 @@ * LED Type. Enable only one of the following two options. * */ -//#define RGB_LED +//#define RGB_LED // Enable for the Velleman RGB LED Add-on. https://www.velleman.eu/products/view/?id=430100 //#define RGBW_LED #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) - #define RGB_LED_R_PIN 34 - #define RGB_LED_G_PIN 43 - #define RGB_LED_B_PIN 35 + // Pin defines for the RGB LED Add-on. + #define RGB_LED_R_PIN 41 + #define RGB_LED_G_PIN 40 + #define RGB_LED_B_PIN 12 #define RGB_LED_W_PIN -1 #endif @@ -1822,9 +1915,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h index 996ec6b202..51f349ea46 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 20 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -524,18 +531,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -603,6 +653,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 1.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -653,6 +713,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -728,10 +789,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -755,6 +816,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -793,9 +855,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -882,7 +941,7 @@ //=========================================================================== //=============================== Bed Leveling ============================== //=========================================================================== -// @section bedlevel +// @section calibrate /** * Choose one of the options below to enable G29 Bed Leveling. The parameters @@ -1009,6 +1068,9 @@ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + #elif ENABLED(MESH_BED_LEVELING) //=========================================================================== @@ -1037,8 +1099,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1328,11 +1390,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1360,19 +1422,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1399,6 +1448,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1463,12 +1521,18 @@ #define LCD_FEEDBACK_FREQUENCY_DURATION_MS 5 #define LCD_FEEDBACK_FREQUENCY_HZ 1000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1486,40 +1550,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1528,28 +1558,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1557,39 +1565,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1636,6 +1633,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1659,25 +1733,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1693,6 +1753,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1708,6 +1775,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1767,7 +1862,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1832,9 +1927,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h index 02dc090188..2114cd5c57 100644 --- a/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h +++ b/Marlin/example_configurations/Wanhao/Duplicator 6/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/adafruit/ST7565/Configuration.h b/Marlin/example_configurations/adafruit/ST7565/Configuration.h index 517df712b4..50fa169e85 100644 --- a/Marlin/example_configurations/adafruit/ST7565/Configuration.h +++ b/Marlin/example_configurations/adafruit/ST7565/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -522,10 +529,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -593,6 +643,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -643,6 +703,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -718,10 +779,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -745,6 +806,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -783,9 +845,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1030,8 +1089,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1321,11 +1380,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1353,19 +1412,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1392,6 +1438,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1456,12 +1511,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1485,34 +1546,6 @@ // //#define MAKRPANEL -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1521,28 +1554,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1550,39 +1561,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1629,6 +1629,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1649,25 +1726,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1683,6 +1746,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1698,6 +1768,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1757,7 +1855,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1822,9 +1920,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h new file mode 100644 index 0000000000..068119466e --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration.h @@ -0,0 +1,2116 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Choose your version: + */ +// normal size or plus? +//#define ANYCUBIC_KOSSEL_PLUS + +// Anycubic Probe version 1 or 2 see README.md; 0 for no probe +#define ANYCUBIC_PROBE_VERSION 0 + +// Heated Bed: +// 0 ... no heated bed +// 1 ... aluminium heated bed with "BuildTak-like" sticker +// 2 ... ultrabase heated bed +#define ANYCUBIC_KOSSEL_ENABLE_BED 0 + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "@brandstaetter, @grbd" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 "Welcome to ANYCUBIC" // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 115200 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_TRIGORILLA_14 +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "ANYCUBIC Kossel" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 0 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 + +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define TEMP_SENSOR_BED 5 +#else + #define TEMP_SENSOR_BED 0 +#endif + +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 120 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + #define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + + // Anycubic Kossel - run 'M106 S255' & 'M303 E0 C10 S200' + #define DEFAULT_Kp 22.36 + #define DEFAULT_Ki 1.63 + #define DEFAULT_Kd 76.48 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +#if ANYCUBIC_KOSSEL_ENABLE_BED > 0 + #define PIDTEMPBED +#endif +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + // Anycubic Kossel + // this is for the aluminium bed with a BuildTak-like sticker on it + // from pid autotune. "M303 E-1 C8 S60" to run autotune on the bed at 60 degreesC for 8 cycles + #if ANYCUBIC_KOSSEL_ENABLE_BED == 1 + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #elif ANYCUBIC_KOSSEL_ENABLE_BED == 2 + // TODO get real PID values for Ultrabase Bed + #define DEFAULT_bedKp 374.03 + #define DEFAULT_bedKi 72.47 + #define DEFAULT_bedKd 482.59 + #endif + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + //#define DEFAULT_bedKp 10.00 + //#define DEFAULT_bedKi .023 + //#define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 750 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Delta Settings ============================= +//=========================================================================== +// Enable DELTA kinematics and most of the default configuration for Deltas +#define DELTA + +#if ENABLED(DELTA) + + // Make delta curves from many straight lines (linear interpolation). + // This is a trade-off between visible corners (not enough segments) + // and processor overload (too many expensive sqrt calls). + #define DELTA_SEGMENTS_PER_SECOND 80 + + // Convert feedrates to apply to the Effector instead of the Carriages + //#define DELTA_FEEDRATE_SCALING + + // After homing move down to a height where XY movement is unconstrained + #define DELTA_HOME_TO_SAFE_ZONE + + // Delta calibration menu + // uncomment to add three points calibration menu option. + // See http://minow.blogspot.com/index.html#4918805519571907051 + #define DELTA_CALIBRATION_MENU + + // uncomment to add G33 Delta Auto-Calibration (Enable EEPROM_SETTINGS to store results) + #if ANYCUBIC_PROBE_VERSION > 0 + #define DELTA_AUTO_CALIBRATION + #endif + + // NOTE NB all values for DELTA_* values MUST be floating point, so always have a decimal point in them + + #if ENABLED(DELTA_AUTO_CALIBRATION) + // set the default number of probe points : n*n (1 -> 7) + #define DELTA_CALIBRATION_DEFAULT_POINTS 4 + #endif + + #if ENABLED(DELTA_AUTO_CALIBRATION) || ENABLED(DELTA_CALIBRATION_MENU) + // Set the radius for the calibration probe points - max DELTA_PRINTABLE_RADIUS for non-eccentric probes + #define DELTA_CALIBRATION_RADIUS DELTA_PRINTABLE_RADIUS - MIN_PROBE_EDGE // mm + // Set the steprate for papertest probing + #define PROBE_MANUALLY_STEP 0.05 // mm + #endif + + #if ENABLED(ANYCUBIC_KOSSEL_PLUS) + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 116.0 // mm + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 267 // mm + // Horizontal offset from middle of printer to smooth rod center. + #define DELTA_SMOOTH_ROD_OFFSET 186 // mm + // Horizontal offset of the universal joints on the end effector. + #define DELTA_EFFECTOR_OFFSET 31 // mm + // Horizontal offset of the universal joints on the carriages. + #define DELTA_CARRIAGE_OFFSET 20.6 // mm + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS (DELTA_SMOOTH_ROD_OFFSET-(DELTA_EFFECTOR_OFFSET)-(DELTA_CARRIAGE_OFFSET)) //mm Get this value from auto calibrate + #else + // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers). + #define DELTA_PRINTABLE_RADIUS 90.0 // mm + // Center-to-center distance of the holes in the diagonal push rods. + #define DELTA_DIAGONAL_ROD 218.0 // mm + // Horizontal distance bridged by diagonal push rods when effector is centered. + #define DELTA_RADIUS 97.0 //mm Get this value from auto calibrate + #endif + + // height from z=0 to home position + #define DELTA_HEIGHT 320.00 // get this value from auto calibrate + + #define DELTA_ENDSTOP_ADJ { 0.0, 0.0, 0.0 } // get these from auto calibrate + + // Trim adjustments for individual towers + // tower angle corrections for X and Y tower / rotate XYZ so Z tower angle = 0 + // measured in degrees anticlockwise looking from above the printer + #define DELTA_TOWER_ANGLE_TRIM { 0.0, 0.0, 0.0 } // get these values from auto calibrate + + // delta radius and diaginal rod adjustments measured in mm + //#define DELTA_RADIUS_TRIM_TOWER { 0.0, 0.0, 0.0 } + //#define DELTA_DIAGONAL_ROD_TRIM_TOWER { 0.0, 0.0, 0.0 } + +#endif + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +#if ANYCUBIC_PROBE_VERSION > 0 + #define USE_ZMIN_PLUG // a Z probe +#endif +#define USE_XMAX_PLUG +#define USE_YMAX_PLUG +#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING (ANYCUBIC_PROBE_VERSION + 0 == 1) // V1 is NO, V2 is NC +#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING Z_MIN_ENDSTOP_INVERTING + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +// delta speeds must be the same on xyz +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +// variables to calculate steps +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 16 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define DEFAULT_XYZ_STEPS_PER_UNIT ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) // 80 +#define DEFAULT_AXIS_STEPS_PER_UNIT { DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, DEFAULT_XYZ_STEPS_PER_UNIT, 96 } // default steps per unit for Kossel (GT2, 20 tooth) + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_FEEDRATE { 100, 100, 100, 100} + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] + */ +#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 3000, 3000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_XJERK 5.0 +#define DEFAULT_YJERK DEFAULT_XJERK +#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta +#define DEFAULT_EJERK DEFAULT_XJERK + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN +#endif + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +#if ANYCUBIC_PROBE_VERSION == 0 + #define PROBE_MANUALLY + #define MANUAL_PROBE_START_Z 1.5 +#endif + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +#if ANYCUBIC_PROBE_VERSION > 0 + #define FIX_MOUNTED_PROBE +#endif + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle] + +#if ANYCUBIC_PROBE_VERSION == 0 + #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#elif ANYCUBIC_PROBE_VERSION == 1 + #define Z_PROBE_OFFSET_FROM_EXTRUDER -19.0 // Z offset: -below +above [the nozzle] +#else + #define Z_PROBE_OFFSET_FROM_EXTRUDER -16.8 // Z offset: -below +above [the nozzle] +#endif + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 20 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 6000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 3) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +#define MULTIPLE_PROBING 3 + +/** + * Allen key retractable z-probe as seen on many Kossel delta printers - http://reprap.org/wiki/Kossel#Automatic_bed_leveling_probe + * Deploys by touching z-axis belt. Retracts by pushing the probe down. Uses Z_MIN_PIN. + */ +//#define Z_PROBE_ALLEN_KEY + +#if ENABLED(Z_PROBE_ALLEN_KEY) + // 2 or 3 sets of coordinates for deploying and retracting the spring loaded touch probe on G29, + // if servo actuated touch probe is not defined. Uncomment as appropriate for your printer/probe. + + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_X 30.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_X 0.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Y DELTA_PRINTABLE_RADIUS + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_Z 100.0 + #define Z_PROBE_ALLEN_KEY_DEPLOY_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_X Z_PROBE_ALLEN_KEY_DEPLOY_2_X * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Y Z_PROBE_ALLEN_KEY_DEPLOY_2_Y * 0.75 + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_Z Z_PROBE_ALLEN_KEY_DEPLOY_2_Z + #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position + #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_2_X -64.0 // Push it down + #define Z_PROBE_ALLEN_KEY_STOW_2_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_Z 3.0 + #define Z_PROBE_ALLEN_KEY_STOW_2_FEEDRATE (XY_PROBE_SPEED)/10 + + #define Z_PROBE_ALLEN_KEY_STOW_3_X -64.0 // Move it up to clear + #define Z_PROBE_ALLEN_KEY_STOW_3_Y 56.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_Z 50.0 + #define Z_PROBE_ALLEN_KEY_STOW_3_FEEDRATE XY_PROBE_SPEED + + #define Z_PROBE_ALLEN_KEY_STOW_4_X 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Y 0.0 + #define Z_PROBE_ALLEN_KEY_STOW_4_Z Z_PROBE_ALLEN_KEY_STOW_3_Z + #define Z_PROBE_ALLEN_KEY_STOW_4_FEEDRATE XY_PROBE_SPEED + +#endif // Z_PROBE_ALLEN_KEY + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 25 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 25 // Z Clearance between multiple probes +#define Z_AFTER_PROBING 30 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -40 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +#if ANYCUBIC_PROBE_VERSION > 0 + #define Z_MIN_PROBE_REPEATABILITY_TEST +#endif + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER true // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_X_DIR true +#define INVERT_Y_DIR true +#define INVERT_Z_DIR true + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR true +#define INVERT_E1_DIR false +#define INVERT_E2_DIR false +#define INVERT_E3_DIR false +#define INVERT_E4_DIR false + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // deltas always home to max +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((DELTA_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Y_MIN_POS -(DELTA_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS DELTA_PRINTABLE_RADIUS +#define Y_MAX_POS DELTA_PRINTABLE_RADIUS +#define Z_MAX_POS MANUAL_Z_HOME_POS + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +#if ANYCUBIC_PROBE_VERSION == 0 + #define AUTO_BED_LEVELING_3POINT +#else +//#define AUTO_BED_LEVELING_LINEAR + #define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING +#endif +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + #define RIGHT_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + #define FRONT_PROBE_BED_POSITION -(DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE)) + #define BACK_PROBE_BED_POSITION DELTA_PRINTABLE_RADIUS -(MIN_PROBE_EDGE) + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + #define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define PROBE_PT_1_X -40 + #define PROBE_PT_1_Y 60 + #define PROBE_PT_2_X 40 + #define PROBE_PT_2_Y 60 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y -70 +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.05 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For DELTA this is the top-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +#define MANUAL_Z_HOME_POS DELTA_HEIGHT // Distance between the nozzle to printbed after homing + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Delta only homes to Z +#define HOMING_FEEDRATE_Z (100*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 190 +#define PREHEAT_1_TEMP_BED 60 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { 0, 0, 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 100 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +#define ENCODER_PULSES_PER_STEP 3 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h new file mode 100644 index 0000000000..9ca6b8355c --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/Configuration_adv.h @@ -0,0 +1,1656 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +//#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 // deltas need the same for all three axes +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X true +#define DISABLE_INACTIVE_Y true +#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished. +#define DISABLE_INACTIVE_E true + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +#define LCD_INFO_MENU + +// Scroll a longer status message into view +#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + #define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 40 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 750 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 40 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 650 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + #define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 150 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + #define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/README.md b/Marlin/example_configurations/delta/Anycubic/Kossel/README.md new file mode 100644 index 0000000000..e5caf6dd88 --- /dev/null +++ b/Marlin/example_configurations/delta/Anycubic/Kossel/README.md @@ -0,0 +1,50 @@ +# Readme + +These configurations activate many of the new advanced features of the Marlin firmware: + + * Auto Calibration + * Auto Bed Leveling + * Pause & Filament Change + +**Important**: Before doing anything else after updating the firmware, go to `Configuration > Advanced Settings > Initialize EEPROM` to get rid of old configurations. + +Then you should execute `Configuration > Delta Calibration > Set Delta Height` and also run `Configuration > Delta Configuration > Probe Z-offset` to verify the Probe offset. + +After that you should connect the Z-Probe and start `Configuration > Delta Calibration > Auto Calibration`. When it's done don't forget to also do `Configuration > Delta Calibration > Store Settings` to make it permanent. + +You should also do a `Motion > Bed Leveling > Level bed` followed by `Store Settings` to ensure a perfect leveling. + +Please do a manual paper test (moving the nozzle slowly down to Z0 and checking with a piece of paper). If it's not perfect, use `Configuration > Advanced Settings > Probe Z Offset` to correct the difference and execute the calibration again. + + +# Select the Configuration + +**Please select the correct values at the start of the Configuration.h file** + +The Kossel comes in 3 versions: + + * Pulley + * Linear + * Linear Plus + +Pulley and Linear use the same configuration, the Linear Plus is bigger and uses slightly different configurations. + +Typically the probes for the Anycubic Delta Kossel printers come in two different versions. + + * Version 1: Z Probe Offset of -19.0mm + + ![Version 1 Probe](images/Version1Probe.jpg) + + * Version 2: Z Probe Offset of -16.8mm + + ![Version 2 Probe](images/Version2Probe.jpg) + +If you select the `ANYCUBIC_PROBE_VERSION 0`: It's very important to follow the correct procedure to set it up after flashing the firmware, otherwise you might damage the printer by ramming the nozzle into the buildplate: + +* `Configuration > Advanced Settings > Initialize EEPROM` +* `Motion > Move Axis > Soft Endstops` : `Off` +* Auto Home and slowly move the nozzle down until it barely touches the bed. (Do a paper-test: A normal sheet of paper should just feel the drag of the nozzle) and note this number. +* Subtract this number from the value in `Configuration > Delta Calibration > Delta Settings > Height`. (If it's negative, add it). +* Save and try the paper test again to verify your height. +* `Configuration > Store Settings` +* Motion > Bed Leveling (using paper test) diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg b/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version1Probe.jpg new file mode 100644 index 0000000000000000000000000000000000000000..953373b1ab93d79f24f7cd3363e4c949a1e90d79 GIT binary patch literal 94933 zcmeFabzD?kxHi0o6r@8$X%PgKZiEpjQ4u6m43O>~QejjO6a=J1Nu^5=kS-Mg6%}cf zlJ4%BdDnpTIOjd@`Of#AKfd4hEPi`m_g>eEd&OR}SAzY5?PDBOcDFPGKwTa10|0h` z-3V$x03{N5g&}CRWhy8?LeK$1hzR%x5c>e}whTZjV*f8W2XW|!8yEsYc-t=vbXSBB z*_Iig+)P0K+l{{^Ao>x`=-q=qWugZF5G5-b+S%KI?K_9EhBk+kkP-mon>PXArTK{p zCiX_A9GVvPD0^oMdj}3hZE=nZmUbrgZq7hNNLW%vSXf3_l0#TTMo3&nSR6(L4&ILb zsV_n1?YLiZ{#~vgdO?lu^6top<4_j*t?yltpE@FrLnTRJctk=XqCyV{f2NP1>;cg) z`BNxj#|?sj5N0MIhwfqS5%h-<{EBxxjOdsBd>HAExM1#vk^PWqpiKVD{d$-mE=Iva5`Q{VipE8j{BGu1$ ziO3VFf5~)-G(W1Qi;>{R zy9DFGg$E5T3fx5mU!9+Z1o5*@!Pe<_8$>k!yA2{*|FaDuK>V!B!~_Jt>N`!(j{r|X z#Kp0V*e}>AK(XDT7$~X(1a=xwZ9f5%n>csaPT&hDcJ10lwu^#{jDmJI`EFW9Y6=Q! z#=Z3PjP&$-X(_hN57>G5`;MU8y_=GXl7@{$F5!h~+NHXjj1QKdVjMz3%VVofZ2m&Hv64G5{edp3Cu;2nj>z)4UT0xEZxx8HtKH-ELAOJs74v z+c#(IEWRf(--kyjT*pNDbrMQ~sadz*biTm1rp0AoL4`LW`Ob^TH?4zT!V7S**6FH5RkFn9BhN-M7K7+IkO1O!l9qHUc>Nr=U_Rp1n+BZ3+@a?ulu+zMsD zY4A#`X;zfmsL$zkn4&hLv9s9RK@yw-q&(uUo1qd(OeV^@5-8LDUn>0XHQ@cN0`?oA zAl#0V79hbQ+p`Yl7N^r#cvo~|rJf$Tt=iu*EIR1BYGiT2{J59t zhnr^^ZMoGfE8cG81voE79X|Oc_v(RmM^P+z-f*O`$7M>MeWFlROJP!J7CF5B2$tL9IAZqO(7 zb8l0z_ZSxVd@1-)bjh?ziAE(}UncP+1H%Jn8)YL*1uiZ?Gu04EzP7dyR&@ZQQ6Wk@)B}RE>@hTuH+qoMtZ$fr4%!r zZ02U2)XREb-A?<62I;yhW}`V_YKQjot8s^Eg{g5zB!{UTb7`u_TAx&qP<5+6gzv_nvPqm((*(0{q=h4{CGreBjN@Tlrb);0rJN%U=8)5Oa zf%271!;No@`u6Tymp4Ni1jWX2Z7D)-$Dpa1tF@7=_Trb@mS@79-y5Hv}rOb<2 z-ugG`WmHr3oh$R`$i;~Jtc3298f)*VnvJ#04j43SrpW5vYkk-3aun7DovVeuG89s8 zL+jnc7ttOkElw+lxP*CNE}&kL0XuM#D(vc~z9-)TSfN?wmx-r zM#U8qdV8j)K7DJ_s?W1V5_Nx8>C@4dmanYIu%IfZb9}D*vy5?t<00hgenva{Mek?R zs+L=a*j@=**K= zbgrgw+3EW=GC8962(BS)9{HnNGu!=7CrT1NdC*PGd&fCyP5v2`^V+My+BXEJLk^5i zbgK83`Hm6UjcB3ds@PT6?*_Nz`3#F8*`02YP#;)3fi5I}X|;!RX5Yi**0GXLTN#ul z?mpR{(yC?AjTlEIF}09Xk11g+2-V0SV*eO=;NCHGZi}+@g^Y<7Q9`0m;!o~=evyX- zD{WuAE{ZN$CnvBRamIpM=Sx|J%RU?lc-gl2t?5|U#ZkK%r*ZkTD-BhdDF5fvgj5gd zhwCKLLMAH%awT8Dd{JD)1ix3~&XoK|Wx&;r1Z>L$ri$#`^Agf*-dv_}7B1f_2KJk|DwM-(Z1RBF;-jl0Yoaq-IJJ6~6&Z9rU zHbYI-ujH=mcRP!z?)Mtu!f6i2R7bq$jW`~=37Op>=}xjbWTZf2NVWnks%t(}~ptmb@GaH5FvPDz{vRb(rNoo(tN z^!!|Y$mnwQ7Hc`I%0U=Ml+AVh&&xE!<(l73XbMv3>6NrIm{m^n+lZ)fKe&<{ab;O@ zOp5y69m4Qn=|Z3W?_pudS>@^1B*#oz?YV>%3GJpH>34byB|i?dTEr;ffEc)R9Y14K{~-EhJ?VL}mi=mNu!^ zo;?^yZE%c3QbaReA830XP9#^O{~Eo(X#H?aBStlDEosnqn)F;f8y6~J@adz45VrNP ztpq1d;wLvr`rgoy`VV8Qg1>Oqe^zBALq2c|!#OTY98<-G@AtG6@SJW8Rn zapJ>BamA}-++ySX2wDZdr5E z>C9AOeS3$8;*qVHMyt>6q~GK!g8QYMV~WQ(U(x{|nR;&a!JyI4vQJJ1-D6W{LIuY? z$tx;Ddv2%+AJA}ZtDC`!2gsbDRC=A+eTY7pcabmmd3YSXfp7;g!1y%#^A zO+U9{ds4~u+&g3s()#40ez=g(7ZzDr$ME_Y*@XxV)v*)Cbopm*`n@Ic9WFG49Dhh8=gZVpdk7L1^aWNOF`^#7D)RUOFQmebxXWZ?J{Mk>X4t(Kzx5d6HV~+(V zW2KXdvdzO-U#_3VtR2o=|3F>#DQIrbAPof;wDHd^-J5)9f^rR3ty+-vsr0+jE;*X3 zLUFC{$&HB6jSuDChc+H<^-A-qA2-#Fki01FaO7;6cJ?x`YyI?k{mt@v zl4PnKYRZ_uqBu%8C)~bZRJy#{(es3w*Ra9cv}wm_WbKW{Wpw-LBi}xB@tz-xArXHm zA%O*g=yE42WjT%g&C*xh()#x+a9lo~emum*_N|w_Yxfi;B|dSntK!o9TyKbRw(*gB zE)w!FL^Ly|tJ68dUhE${=dfTd_hy$s)~z7juS`0Q-DX{ZQ*SwIhjN@*qf9?#UB9f4 z1sY@P7F)wtL%xNS)|X%b9bfkQ=W_7JO;6^A;uVSf0?t>@uJ3EF?EPqm9znN%?vA<7 zzOIq|WiUum!jE;gk1T97AFp3#E4fy;@|oM(BnZW!QAfA&p*oa*Bldd8oFNu?F1MR4 zF26`vYdBMKyZ1BUfvYx*1A1fVTJOjUTe&UjcI?HReFH7gipMP(H{$jD%@?3r=JUvh zrR>UKJl9q<#czGtE6T=ka3y1T(!w{o@j6 zWYPP&12vbJM_JtCkg=!>m#bA5U6Ct{J&!||&=b3I(+1Qd_Frn?Gge2*d&xetjZeaa zkEijjB{ZWYVpb}miigXmFK#5PC9LF1bcx#0k1fqCO%|mV@2mG8D67`AeE8K2{zxUY zeyPWVuN6-1zdH2Bv3F)2`A*NhT30@|uc};l_FKJ{LRQxb$-}K();+@;NO9|fGYx@( zufta?9A>{}^`o)vOFHlqRQkf!)mKFw7d!OMjy>!sw&-4LxNPcb)4h3z9Fz53te~}+ z>w67nk>1gkHO^<9TanMh7#OY8xI?!;V^T&81_DycnNliV&B``K`>Rzl0oAiER zG&r<%bzExoVYGb#+pEiU(YMOYW`n@&N%Je9U2<_US)W zc$4v2rJF{07QB!mAW63JHi-8781l3jLFpW*`tBmr3!S|$33p%I?ZU;pRx!PT)>D{C zACSoW!f(xT(%58SU|f1yP2Ej_rpP(Y!31Ljc%(vmvoWY)ATWF=RdKp@H`3mUgnqR!D|% zIXmA++h>N(`mR!?&s^8pt>wen*Cs|&2C-m3+y~<#+`FQcyI$cNFO23B;I=JNT4tBs2Z#&%o#qp{$F-b0Ct7jnH$*!5;!l~TIS z=Dl%5BrN_G%mLVS!OxB4AN`tBR|Hqzu9rWK8FRTW;a^M_v;Wa~WhE-rh= zI3r`PHfOZu*?b(+d*niMwzvbf5s&<)g z-$qCX+NZkuSG=c}1#QQq4y2(f&H#lC@gv!xubeLt_HGqlk0M*59yc%;?Y66^da8>W zFz&AkEow4!2@!Aj_PMFREwz&QN3ZKEc8dSn?{QL50U;oDLQS0rHv$F#Hw)qtAl!dY z^%ugC8G=Lx76M7I3pc(dEG#Us?f&4ldzy&@Qo6-jws*B;NvoNX^ZK_rnQbl{-rFW%`rD$=i0e<{UUw zcQ|2VWN&YS8?m9@4p-aK9q0UnB?@PcbF&klsnc0QTT>n7i#pH>=X_f~S)2nzKD_MozyTw9K8=e?2HV*(v^hutWWRIAdhv{EInj zj&l9=ploZS^y>j8^LNlEjIGTzjI4}d{5ZX#`H?f*gJ4=F92_S0E=I@gzi)H6o2ru? zp4|x>e0L|DOmuYZP$~zsY;Yy<%bc(=;rNg2wVZ8G+xD97HpjJoIVX2DHAdMxDH);+ zaVgkVQqx@1`DdZwWSnD&+XZ^Y)NCi1zoONFqxJt$wA#itJNBAR#>e$`qQ#XS;ncQF zvolr)#|wAH?g+L^mS>y8%~Jd@$eTN5PB_190mt33+vZ12faA^3;Oaixwtwb-J`*l% zKjVf!w+&*u{=iuWoFV^NFkm}w!liB7lR(hS3^F$Gj+;5b72l4{)5p=jY(%#0FTwjy zH@GPY1UUNJW;?B`@EHJypIYze{`*ciilcu&|0(^y;kNT)7cT6dZwSG0*bcz!N4~-F zcxblUjBU63aF2w_@V1j4+#^8Tgx4u3>@w0e0Ov7Is_u4y$xbKDkKjmn{cZlR!}-Jc z|EKxG!7t+XD-7&hY;f;BZZMg|$lk@y#QCo`$QT93n|IX4RXZDdJM*96;Hu}J&nHm! zwmZ)|YG|2T{NT5fMB;2?X>96z-sTLhk|X{R5Aik!t#Pdf>Gp$~(jQ@ynmgIMIQ+wk z#NNr$+|usHyF;O@jSF34+YW|7Y3PEoS2eXWbuvVmnm`Mne>pG_|;6hj-7j-mNKTu~XDLVu?2C^hGkI_hVBHYK}$ zTK~f_nT5TRr-F^8`Olo9-bwt)pVm+hQWH}%LznHQjm*{53H2X1KmXJEpU!t1nJe1c z*gO4^xwJdspHTfpKri5|y&W#E$x!wV@CVJ=^v{YzZUZY4o-KuuJqlJRJp0|Sh%Nqh zzWqiW!bJoq;6;F(-IjNLyBM}*+?z+d?GEPx(5%B7?&S!8*Apl{fus0Pg!3DF;e5rv z^BMonXZ$;#@$Y=bzw;UY&S(5PpYiW}#=r9!|ITOpJD>6Ie8#`?8UM~_z%?lm|ITON za^c_kj6Y|0{y#IHu{{dH2?sj>(1jNQHw;1z6o3h^2S&gYZ~#qU0c8}toVO)7oC@gw z4=y->BG3jqgRbp;P0bIk^z#Vde^z7{}h*#gfiQUGnw3PbaI;0Dl%ukjE8f?~n}`f~;zB0$(T z8GxR;gog<5X!i=ZNil|p2$0JE0o?SM#zO?iVLJtGmXG5hWR!`)&G(9UhyZyP?}3}c z3wQ{boEUKPOAH<&K>qtD;AUGT9wI;iK^VB%CxM4Qn5~f=<`0An{X1}rsT2<(b2Mg$ z`3oU)We(h;X2V0s7|Mg2lh5(+2Ltn9+r=OFgL&?_!~B7evHS*ZCho;U$mF~LH^X1z zAp*Pr?%-yE3?3ptVX+msnbwAfkZHRI?y%47-s5IlsT9dHA2US)WQ(_jh2DBZ?G$Xs&2fNC)Y5cm8(9zy1b3y8f}kB10QRmK8hPdvdx$mDy0ScZN)gp6wX5(DG8-^7_d+~G zfHoQuko}kv4|kXxBlm6QPlTa8Jpgjvvg0AtTKO!N&_Fd zD8O^`CGalzHhBI_3Fg836NTWpOEVtAy!KNC&+n?^A!M%PgM1S)JcP{gHISci8xLWv zdLs?;!z}O+GIzd${Of1&5dLl__JDk0Lp+3xwGGIdq{l<}>pY#k&HRm!5e)?S>ih5z zw(%l4Am1Po4iA#PAO_y7+f z<9Zwvc534xWaJw`5t9iXBEa+RdQimi6b~U28VHK$YVi;rP=_B_2YC zvTKL=3lSi<`{K6Net;UVnPro-QPn9{!y0g@|VJkd!YIa&<7(24@dZb6`c zJOJif3akgoI>UGfnT>}a;rKH=gv=TVh|`S5LjsT@dkQ?}qySIPHiM{mX7FU72Sgd+ z;(1~p1EP4z@DKqKQj5UDHUT_DfVk*G;30h>9wI=rYb1#D)51dpaEn|65syUh5Hi{X zAi{*@Z`>Xm*;(^N3eODK9)H31Q8HPeP!2MJf_BaVhPa*i0><{Xg6@V6g2Dnqg5Vg^ z-NDe<+7!iMWC~Y3$#Kn;S95V#n#gfo5LXvccThC7usrGMWUB3XR>#=W+F06z3n|ZW z%w5La*1^^kWys-fYh&ju<1WXw9k>jXan^!d9NSJ%)^c3i`*k@ks%vs6+B=zYhzkfE zH5QT(;*by)fZLcQB_)q=z~!t$f?ff!@TVCj`0=J_n>zlGY%DppYln=XF>Vz# zOuwP4sR`E)OUwUOns)+pvoM9h{UI)^O6WD;NKkhHwXUBfq!%0-yHb= zQ4aj>54EL)T8aq3vYpdXPumSiP$$|Tx#L2(Say#rILep~eq$UT)Z~Om}L~HEe z1owd(GW!!cr23u1@xTl5) zx3Pg6Wom2zWg#e2IO%A?jbuc};C>I^=<2&+kZ;_;qE^Zab>&1FPz&h zGsK<`zwLhe{B38S2)A4kHcKjIU>#rLb9!=bdZ6Ndv=tBv8#8W$%HXV~#KyU6*+Wn(9_D2Z+O>cjMfD?D>H5BNR zF@V890MIlt0K%ycfQWuKAiNR}8N{!0J41FJu1^8r0{h5Ly@xX7x9|VB5rn`;0%uEe z4xF{3mJWxpi<2u({;{Er7;Z?UhKJ!X12%8~9D-X3MSvub1;>FhI0ZC-4$uSoz!Y;WB@p%2#P@kcm?V}1NaQuKqvSPhQI`v1W)aE*wBh@Oap=qQma(Mcj*B4Z*)B5$JmMA1a)L`6hzh+2sHh-Qf}#FWG=#D|Gx zh}DQM5}Omd5&IE8Bu*tRB(5cHBOW4NCLtl&L&8fUNpg}zkHm`PI>~*KIFekFmn2Oj z10+kNq@>KGhe_o~HAoFfQKWvPk4dvht4W(lhe%gyMs{tG(U2V^lOfX}Ga>UJ3n5D;Dyq3I+ zd|~(Q-CVn+cc0sBx%=ksN4uZze!IJG_ZkHq1wVx%#T5z{ieQQ~ikB2$DHbRxDS0T5 zQ(mG(Q3g|HP}WfPP_9zZQwdP1QJGMosbZ*#sG6y!smZ7hQY%pFQ+rZBq%NRtq@JW9 zqv4@Zq%oxNriq~`rRktqqNS%5rq!UerM*v^N&Aj=l#Y~+hfbN!gwB^PiLQojfS!>4 z0KFo;F})9cGJP%m5CaJVFM}F`6+6~WM{SSI zo{&BHd)oJ`GqEx$FqtylW6EJ_W?I?1fA8_Vrh5bS=I(9VyUxtPtjui99LikG+`W%z zAOF5{``q@$@2lN6xu0Rb?0)0@0sHg!e`6tF;b+lexz3Wr@_}WEm5o)E)q(XfYYpop z+a9*#Y*uU$Y*lPy?DXvN?3U~i?A7e!9E=1C|a~cbWZHBn5kI2*cWknadmNj@z>&85|R>55;+oM zlH8KlBx5Bzq!^?$rS40;l_r)xA&r)`5lpQ_Bd(8A$^05Iq zE;&QFr*hxrIpnX&Kau~A z6kjS4Dyb?3D1B0d_@xO&&wgJ|cHvs) zwM|0}!$iX+BQ>K~qgi7`<0#_^lj9~4CS#^@reUTdW^!g>W~1hE=HcdJ7D$VS7L%5W zmeH1TRwu0ztX8ZwtkbNqHWzGiZFkvTvn{owv$M8)W6x&qZr|i^*ul@?yQ7R_q~om9 zX{S_Yg!5JB5)=dcnEK#y$mNbppR2rUjO(h~dA9<0T6a754<7s;_dG^CRXkI!6J0mH z{`v;zjaxVRycE2idLz7zykDaapncIpH&t(@-y*+dee2_Gq1$1%7kw`Hl=-sy-t--~ zqk1RHkIK)~67W7yDDYw6=6&P)?}LPc9tB~8&4NFL zNQA^cAbDW-pgj~BnjS_Q<{35+t{z?#!4VM_Kn&Xeh=OnNu1SYIMv3&C7sp`|BM4rTlNhC?GNyEwK zlj~EYQZiEar3R*MrP-x@PuEI+lOdUrk;#%7l0}f^k~NlnCHwO;rDr8MM{}O$?#T^& z4rleAkLO*>YtKKO|GGd5u5UZ|BDRpeFrWxgiZv8MISxi_C`PuIS!Q>m+|SE#Rk zEBChIoy@z^_fqeR8zdTvK8SxP{3!mh@RP)+qDINalF!ng%bJcgRW&1YiieR|I%@#=zRrDf{kGA0vx~SZpqr-qVGm1BVlQ8B?stjrm3>Nm zANsZXI|qyhCI+1c;fZ0xl*124*hex(MMf*eRK`A!UmhQtaG2Pb^qZocik&_*{bJ_$ z%!k>FvqN)EbJ+R&3(N~?i(-qfmo%4pmTi|eRsvR;SJT&|*6P3XdoSB!n>jUnHamNeOl#$N>3n zcoa2)5FS!Wh|`FGgv{=O3wv$2{R~&9AG3ncVdqrwp&=@)>ETBqGWm8ubLE{W|{hKi@~#1_ZlnBCFb*pGwVnwoA8o5`-H2Y zaQf<+x}2Bvy|bzfS3RV9!A$Dc39G-4S3P;r!u{@}^pdwVJIV?ER5fHwFoMBtMl0)cX%ipEFwlskSAsh9T`43-( ztS#lzA@xgQ!pBCoiZ?YXvn`}jkn-94cs9`TrR&cYt5+RoPFlxZ^^DlO>N&EtRQbhc zu-lrww!?qJ`g#-PCb}V)CgT)UrSlfDN444#S-)A9;XIhon3Ijr=YDJteKFA`AOcb-#DjG6Ufym&E;YtrNk4tQShz`|MX^u7A@Mc<_SN@}bDL7rL01b~!{u zkc^!wQ{@y!a-gTJu2SF2J%pLOtG;s?3u3Z+FYot~E7D~OIe&tDZX)sc$OL9?y6mYu zx^LoC;W5V!#>)?TvIb9%Yc?HBUg+6BC7E-tNBFvvzZjbL8dU9G%d|6MqOl3TNu zH`=noTY)#sJ!9ZOsePD9&jCH>l$-J;^^33iT8%%(f3JW3j@$Tcg28%wH-)rDn1M`M zTG%lr@5L$c8xgIA42zM~Ec}O!FXo4O)eS&!H(1~} zt@>g)#@dX(@m4VPsQ`3MRSzS9Uowje$<>XOkHEE46AMxU;h|~*TL<#xHa1_*)0_`r zkC2tMHxV9w@R8B2zA{i%f5n zyI=_mGULsMBpWAL)MfbCHWva}6han1qdSpmK_m0p!$tID5zi9WEK7tvB;TEgaU+Zw zr@D>ddhufQyLq6jwnEzyYHgqAhqq|P^8$he$$pXnRtelrIw~1*i9O*KvT@K*oARJVCc9^MZbB5oK zG9gWS)(DBH`<^_( z9F%;9v`fMezO|$-Vu?SV)2UB55IeW#UOh?0%gWfb(K&r6V}BcR_+xPchPL$*RmYk- zd55CG0&k@gvqErg7<-{l3g%M`ABE@B5Sb(r}Qy-P{ij2rcXPHp`bC@x&P%Y__WJzaPxxcT9}8r~cM_4)cNfNFJtJ2{oxYmB1?{Qu z+qCxlrGQY;747wkuBDnuVs0|Td*q)y=Ao~eJk~gI64iMCsnLZuZBZ- z|FFh}WDyn=c^5QIvu+qr4ZbtJJ~QNs6fW1dlDq57&b6_3V0l@q?0);JU>~bNS^2Dk z=R#h7ddKuIi(XGpk4(=rEacr_h{1&8`v4u*AimhuFpR-{li*`~L;7LpTuHf8C$A26 zU@R4|;F2draZl}3_e^Qtxhaju2BJkDzI-gEx7$j2j?r|jl$>L&rDSQDK2}MzG2%VV z`YyPpd8>rRsQ=B@pv=%#5g7{vt=(T zW9fqjC5$D-%_Q=JWh@;vF?DQ|rT*`9TPJTIXG2J*`|`hdq-JmR@|@6VLV{ze&k z=O5h+)26JvEbp+EIo&&JD5uWp8|d#oCl zr_~$7yZ4@vFgKsP(bJ#U@O{*INnF*&G&6s1D63LL+Vse6v4G4|A?)E@oYRehllv{G zi&a(A7s5XTY@YE(7i6a|A9!5q?^*0z`7Xnv=Ujm117v~jBF4*}`0bvfjmtsRosO8| z5=NSX$M;TfeTni^vOu>@wA*`+Z(Z*#ThU*cuI#AX$aR_Vp6LF+Zh>v;Z4FVcM$T1x za=YJKTgni5cJ_tMOs2BIs%G76U8`2x`Q{G0Qo^Pt9rMx56o1)fDVepI%SAWe8$U@- zpKFji{+XEqo2KM;>@VV>gf14H@nt4lYFs! zdy2DC^<;r$tY%y}A&7Iz3XvND{F9cLRXEvS8tbQ(NL}cc8O6R5equ>P`7*bbj_S0w zpWD;f&ePG&PoC#^UuzjUcc0uPDC$ALpnLUPeAsMk5I4i3{xJb7qYGK?J`-eRVU=7vh%`FmD?MJ__o6K_-Zc|L``xdAFW>{Z+Ae`w*WYK# zaO-QTf1}uoymx~ece^aa_ocIsOJe~kbwl#28B$s-U>(aT9Zw&dN4iHy#oC&xpORD2 zkP%)BxU@d$!ZdeDqpD{5OrgB$s+l}$ga2aUf+D3(Q=6KeHgE9LGv~kWX&s!cA9kKd zDDsPBbFoq_mrF+1dtQrwC~e6v^u;q){Jg-KEb&JV?EcUR&8xTo~)+RbAG7 zwEV8F)BBR=oSvfI>EeZ^rj#Q*Wb>&MIr7n&X_OkeAqmS4Z3Z>opO~8scsspDy7Xl( zkfbrPAK8Ql%$^YO?4gVI|BeL-)vaiO=;6fdPwJ0q`u82X5g8d#>WLh1S1UGSpL*iY zI8u*h=v*?WsqVT;`lVsH>Ih2Smi9Dz0J3<+h4<8WgGc}41u^dE3w|2k+?O&K5;C9E z+iO{wr@!hylUJV4R9C;?k z_PzGAsl{PoIxL`NpWZEgHEM$;8)@qQ`n7Mcb|4^KF0H!AAM zU*HU`-ACOYu~2_n?uZ^mt=TD7hCKI8C)I;WQ#M#|R@E{E*)V(q)7bdz1;N-2!)SEY zP_s(T?Zo`lB>P6aptSV&#nI&qi@h~tv*Kdn3ANUV?`^y1)E{o#I<3C({Pa;C;~KGq za^;W!sjX*s9)1g_$Pz#z6%+JBOC*s=bqV8ZsP2+{G3|!C>F>^|7cWR1i_k%vmt|S= zcAV}@s2NV|V(9Ins6z66*XT}(`uHeGqdP4)W;0$cc{g2Qg~_8&WF!f;lvcaeXf+P# zM^{u{Hz%QJ+0wtZxOSzD`P6+`yJJHxM^(7?=IiL2V2}z$n02xd%)!eAd25w5FRI^H z+rJtLu(6RZH42le>h1pcLdYtT`nqF3G7kN!*|+q1GUcJPb^j-qw|@3dR60C~jg zjK>XEyJMAZ)(V^E)c5KP=f3hsPY3m=ex#&gx3sxoORT!-wsA$BMO$|wYBR~8OO5z? z0b5*wQyO~{>?x(`S+1bNa<8SWnx`#b!G-yWQ8qODq}Ko+!wH#&a}PX+rn{~GXSxi3 z_Cu<%&Anf?yqcV)GIlUcsJgDi_6m`$URmlJ?i}R68X{MKp(kc zA!p{aH>T*WNZ#4;`;=ZcP|uZzqwOo=h5}^VpUkUd7-vx)ryUxnLcf-Oe`CV;=4OR9 zW}%(@Jwxb?2x)Snr0@oEISKm%8X5+h=fkLp#B11tFb5x`z4z#ONPg+!)9h$VHhyyZ zRq8>l0%EOG;qyz28}cp3rNTs;J+vmTv9K>z3iVl3uW!LJcR`nOZ#ksOwU?# zUX2LNIwX0JRl9Y-@r8IKbK`fZBt-=xsbl9y>oE1*9xXGL4$W&%JJd1C+y(U-=gfW7 z335~^66D37Hs-h|$P7v{eDi0)AYt=+dTj|P(w)|$v^6!AZLTCa%;@_;r`=2>@TiM< zujW?B9JyziO`UvZyvM=$hT&-DCv(ayPVd-*+OBf>mHaQCJj%Gy$$9}Bj*;c`8= zjPex^lJjP;&+2QJhXT199U4KkYgo|WOw&FvS9*m9>7dg+^sa%S<=jU-8D)%}hE0x6 zq+I=n0MF(m5}%f!W1H(%e7n6gkI8y!4IJW0+3%WDMwU79EIBtLH|f(yDz*g1BN%sK z7l(5u!X=qj357MI0sAiHRwQM|sIF@9mONOZrtm;t>{fogg`z zJJNDy?_~OiX4CnNTxMc7(7CaD+6r3W-bZy6L5 zL_Q;tahm@4^uCZia>-+{<$}Zs^80a&E-X&%I&wO#ZPJ6$`5JvLUj>gb9}?E-t;EoTNLqzNwBsGyO)ZklmR=M)}i6gT%04h)!4G$nybsytZinMt~)Em~5$NGr3tT z+Waf#X^SWEbNU42(v5YWM;K-UJ*rF9>|sxR*y96Y_Vqf4)o%@J1&#&X_UH8N5|^f^ zJ$ig2V`9vE-U9tyBfMeRTUPIs(cRaB*6=8D78$#XNiQOp;qmBM&6Prf$*EZx;p_rP zVUdBV7U8hmcXl_T=7`=irzJ@15$%7S8nu6A?UXzFWQD%v(>pw27vX=eajsk3lmALE zkZ+4i_!dU7J;kI%vCnu*u{}6~z`G_FX$ z7IRomi~)rOF#U%U8v9djhkV3XN%hawvj|RqLzl(XpWBzgwCQnpWMmoRWs2;cn&9aj zVNQ?_~(bV0k);LWgVTjGB78oj|`cgQ0^V3+{1=k z)l^rVdoShmsBEgQS*YFENi2NukX1^;z=)oLB5keqV4guOrjwJ1Ug7l6*0&dDVRuZN zM|nftpi5DsHe+mgLJSUkASU)yF0I00loCZ6rVpHL%OiCo|#vhdim|q6D)ADuAf|U_|DgC$m2VwvCLkxSu!^e z|8yvC$=xP+@B^8ZaK2fduCDZzGBIh&cLq#fSC27>PE!OO6kA0vpogDkZ_TW!gl{IQ zG5Tu~++nC6(r9RCNKKW=yR!J$w5D;7te|e(OWpp_+QYSB7{29&wvJb-#|ZapkgkMJ zBYkx}1_G?sDKsWO=1!Re8?d0pkJ-&om!FSrf3)=?#alNwj<1iHVKZBmiri^ZjjZ#AN+DJfMXavi642}$qePf2`O{gL8xQfr$B*SyZj z$EdHw0&R_SH{PW!@Z6++PAw2AEXm7Wu%$CjNy+@m)H%`9YL~;@lWb3Nxl;f7mX8KR z^1DPC%P(vcV+Q3X8kegK7?1^o4T8aftmcI$dt?|H;Riz_tBCf?x6ETj?I%E$0ybotyO;GeSW*)!0|59S7+soc^AgCm5UF&pT3$G@^aDNS1VS@iNz;iwlRViQAJK)&jvmKcTeDB5zrx%=f1Plh>N&YMZnCt-SAbeD6p4&* zZfa`N89uz(8NOOeq@$@3@U(90-bdX5$JI>}jE3YI?_|5$M%Agu$cAH@Y;x9b)=>Uk zQr|Mu(=$db9IxLFmaI|N4(k%584+PF+r^o-F=>lh3+exQL{3>(rJ7h=r@9Vlzd4vt zd~V;PM{x%Ml>zo7>r3VtTnt|Kt~Rb1 z&KE8^8ID_Ci>9vhx9Tt0f13V&s?TagYr-I{me*hlw^)58u9idh#Z{5Cg z%jkrmjzrya^W(9Yy`~o5FAMbaAr#G`c zI@5AsLHQ^*vLZxqqhPrY3tSgo*cD>-Ru43^pSez5ZwmjjhTx`0**Xsv7`Ug5wOgV| z_2fF9{m%?Z{A_-=2R^W^y)E;w-}%lgJPyQ z0|dD>b*@MBQM^=9KAQ2yvptPe{^m7W#R-L=3lvsY;3vk|1}Phh=x2NCmHhC-B@4`K z?{j({ZTbv|lyp&zys7bfYl{Rz3g183Y})cjZdB`@BZ?@{>Zn!K(-Yk)?s>=5rFzkp z<+yLai=uh^ky96R(e?xyQOY)z!^-Rf@(B$gRIJVo9XiTB^&hnj{DVg44eEHFruuK> z7SD?7&S?;dYAmm@6smi9=_<{94-l-#_A`&ZSk*6h5Lv!@T#B~^BRDy~f#z&czjZcd zp8d_Wv@{>y3!7YJ!67_j{Ak)b)rhB9z?mSu!hE$i=&LmI+}f#o&4OhC;WM!4#Rumx zy~PnE$LmQM_j0pb`y3h~v(Kab@pu+rMyjWEdQK#}IHOLasP4NJt!s{7ujY{$OlCfb zCJ$gv_Z|?xuqprKaZ&(9a!G82n73HKZK=Uv4Y!h;ANy`PUKxg8hyurJRiqNQqI(P( zojYVcguZTiG_l-fqJ)aTM=;IJSZY9*m)no3{ZiEO!>LWFD~uis`llY0BBL_F4uow;w2Q|VlIm|ZQY z{K%xwNmqp!gC~&IrKN9_R1&R5ZJ|rz>5*-}^mS!8p$MV}IM%ffv*>+(gfyjM z7^exYI|14nVNt&W23YAaNaO1&K1n)vvQ&|iqYZ55Zqz^N_)vy=V4+&wFfluQ&SbSz zqNf9a0o(_u6-|MY8G&%DoY=iZ9}S>rrysZr*V!PmGG*3uLsa&7aTe0!5^?4siB^K_ z9`_3Bk3MB(JYk9tD~c}MvoX>kcPxylr`Gv`f(Wly#F>FgWu<>4Zd)Aan$|u=qx?zl1)nWQgdP4lhc#_Hfo?BvN}JR!sPhtDc!!P2Jjq=3IeMGf5h8e**bE|FAH4 zfNN5Ee_Bw1%T{Fd>6&m7p|a5O7!wMhFP3!`cuYmq;eXqv{Ey~vGBz{Hfd6_)PDuM1 z_g!n~8l|>5c;*KKZ4$4nGH=#KIK*b1HBgOuyp&V%ypCO4LyOffQ$g%QA8a&gRHe2? z-$CW~4Fp6sh1%Wbm8jO(O{&1uqN|WI8RcHy$#yi6vh;#aMZNtx&#weNy@vN8y1eq} zf?P@`*je^G3u5mupilA&GoYtCIscd%&Xt8{-{}5nXi7@8lajl5vGC}vwA39*Y~hdW zd_1oe{?hwa385{Na&T-#QUq3+w{bQ}Qv_R%{T_*ah{ih1qarFy{*_7Y-(2&$Nn`Ze z?XXlkdtibTrVYeA6OTTUY^>Yk!5%V@j~0eZr*uE8igvr@pDu^l^Eim~g-IQrCa6Z4 zczh$l<3?KG6YU592iHxog@_x?OEohT6t*eNH`_T8C=-9tKq*t~qgzJ0u^9{)Xn?Z! zyQnu?9=M7p7&NH&>Qk@lDz=m%1#!6jg7wZ(1ah0!BF8oowf}sF>Sun>l~#CwD@LS= zaaL}&9)JZ>?-jc#Sc3h5A*};{Txr(hmqopwaKcpVPY$luI9^q@d5ZCj>o-h%e*`s_K5w)C&gR^8`@D$8_wIG^L%LgBb62tdF4#!>w!t16qOu|o?>e1m2i>2NDhHOLq*Cvf+ zQ=#4E7msTNVj!OZskdX7OPkX;CLOD!wQMQFA7Wbg%-r-{d5?jqx!Lx|#+E}>n;{EB zD(%HNqou=hx`a-HgDQQ)L)3cfbW$-X^`7gi%1blY4-ytKX11@Eb)#UydaFcvR61ky zG$Sif*LjV0Jg4RihH#5%hy9M=!Bv*#{8fg9G_pn{S%j5>pL-wb`d>+82)_sJRXp5> zMfs%?tCz_u*S{ygz6z!V`V4i+Z$u#B~|z1 z$j@rmV-79YZk}0!$59jEOI5$%Y)U$2Rm5w6VJaCT`<0WN%efnIY*J3nS0fqI+ve8P zeiik0aQL}P?wac%%S(gx(K(=V7eW_3P?42~pC2DAir*4Mc9QmwB3gZ#2DHaistvED zO)9PKSlQma;gap{AAabgHM*A^?_S7xLs7WlnTHD}~#kziITJtARJQJ>>*7ttKX)=8-h_GW-}~ z6MfS+7css(OuQ6_F*eEwuza+7(3df~*Y>?2Tao8CooEjEQ1Zj7{oE8LL=W-P32e9ci%&cbJ-9=hRWaX#c{ncqG&{sXHNV*K z(s0@~VmgGG`zFBW_58PQ(M#~K%jFjG4|7{jE z#(3EVa?K;?C7HA(|KZv+KL_E>ws-&G-+cEfZ@G@SEm)WVaXw@F4#{Pd5=ug7kdhP* zO>YTK>;s1^riA+IdGU`wWNd>N6s>nq$ARZ`Twk>I+82OV;T;yA#uX8Lq7<_h9aUBK zNL@p5ij-uTV%y_7-xd6Fet-XRH~cCQz{nQ}1B(U4c?94Ry_^AR+p_M!RE@wI%*&LO zRY>&s8P`AsGlrwe#YlzL)P1xT(bOfmb97w({0>%OI!7U~oS}GdbCB|b<6jXd&7>8x zbv?SQm#Yrrsn#}0CV)~5ZVMZifED(kyQC3c!HAmSsG==)f{vgni_z!3L4y6>-riXD zc{1kPa&!>aQE4~|(tu+KGhC$cSfZ^twVEi}3K8k$>(Z5F%{^hN0YU@k&S^b@L{5jD;MbP()u8E? z_2fQy?sliCdaU~CK^-%n~T)yq@@xxKs${?n4yPz#@dmo zrDm~8NY3|!CyrXO6{Jai*K4ulKDIsO&4|qP{>WHp|676YIY*YxZ2&$L+h~oJ##tRdyuJALsV&L(*-t8c_G}Zyj|Rac2h%S zn1qf>kxJNWy9VW58ykp~K%+osFn4xBToT`@*-yRW?m-k;i^;wxYbHpt!wJ)@yP(?- zhI4%uar4)=(l?e&|GatzdPHk-xyxKsch=)hG#ah3dt^d;dv6JWjZWi6b&R@z-;Tou zXyURq^ngZ1`>9xwP2hrA-Emrymlp~CIW-Blxo|*Zng1GW)N6IydrFbeAb?ywy~|v* zwaFIK;XF=rUZ6bNTcwK899FXfc@rY#& zw3>ow2T>}`L9S~7f5}i1yDIapd&FNp@B9{^1l2DO|3~tA z<1+)tR6t;TBC$B$#N-HU+R(>w;q4`pm@|EEiBf|PEhk)qYp-B7* zlO)v(#IT+NE`BH29O}F@b;dOfOZ&jbmVau$oTTSEZ-&=Lk`kxVmVL?TT-=w%#n$J# zHV;aO?&NK#yU*%ubn2Hcxtqrk>f256d70i`H&E4Ho;wDI+)Bm=LFfJm8)bdJUbV}` zg!;#b+totl42mi6nT7P0V%(F5Fvb8Qjsfp2S~!}@o$&gcjo56vj*r#q+gFC#+WiEs zG~JzDp(OYx1q!QAbJq3=6B#t!;llXAiv=!zpE4j(--dN+nIIzW z2bsNq#}r?ce(;f7?y5*T$2v7UwO`J8CD+c#GM}{`d+Zw9YSILsR|x~x_+>tQpnJL6 z-ecP?G6B^7;;fo0XL>ZtT3a7r+@cbv9b9qP7^3C+nhWb-C15Fv!aGlYPceU$t9|U= z*9(EBbP?ahu@26!7MGNSpC!OA7F0%iNig_iN=nM4pEISy9@Tvul zDJmh5cHm1`fO6#YS145DvxuSyx$aRLJCH&>-Fe3qyO{FB(BkG6TM;ZH^f&8o`?Z+y zq0vDTb+ZqLr6`&9xt`6$`ueImUSxy99M#b*{bmQ_`FjHMCVm@MsG?E~?$}-bX1lu{ zYx1DjAVdwSjKpa)g`ehNW>I~3WDSD z?y;tO)q^y{g-Gpz#pQ$GwVv6F;YCqhIOJK{8bfrcuQNMQsup5r! zobQd+Q+?sh)Q-0Ae>{zK`m~n+YpLe{Gomo~{~DQpmn*H0;7f!dhc~E#Oh;|QyY99= zK%Q#Na?qb|HDS+YpI7!aIuFJ59?_)P0;-WV-g!>8RNJn#!E?(L!># zg!(V%qYIBLu53jdgO?5|nB5R%f&h}R6P$Tj^f~lf8;E{^)^yu!l){VO1wHw~VAS*? z`rLP&JsoH+tuYK{+sFejf5xA*5qdLdv5w5>`#nNiaIUw+N`8Oj{ovFqUHiOQ=I-Fc zB85>_KXC<3V~Am0ndA}%bjCqide1~t(Ls7`ty|GX(dscc(cj0fRk!S0in*M;Zjx6- z@DR)f;H8@KTUJEBf56flsw!Nn+AJE}LXlxy>ed_SDoR6(GExiOhERpn$_pQIIMcfg zV%|g@ShFI+n~?R?cc2d0>esbC~B-BcGeG5#a`Lt{0 zdV~E_2$}G1tw$(B-`qoZTzLqWN-B)y+R>ZPz4GF?OCQXzH_$l0u*K+5ao|?pX#w#l z)h~{k}?Ej{@l0heUNmx+MrTQ?jGT_6D%Y>xFO<= z&06+Gl9X`Q-0Fy`^ZOiz(|y}QG2=9bu&JJQlz&@MpH&Cj3Dds^J7J=D%kPrJJn$N6 z%vN3WGyzYBD#P4Fze9LBPmHg3Z2_Kn#+zw><2;8y=4lwz4wJ>RI+~9q>0yDv!kk+b~x1JN0$fN(e6S zW}aim_-W_QnH4_Z-C+ahfv(Y-N}(1ooky%?PNj`LhTa#t@$cDpc?Aq9WIxRAr`_mJ zTfOA`QVjnrTJ9sDFTvS$Jr$v|WIDsTg160(#*8ppIIOY`vE!O!R4yK%#<~7A=HYq3 zh*S|kTN@;mYWYQb&QUiz8dqf0Ib0=jnTLhf2fGK zLoS-CCuo-5aKhyA(Skv2qkaxN7m{$C;7T6Y6pZA*vdie8uTS$_N{tL3P}nmD1Nd>= z_W%ES$NxSE|5u6RKY`jvL+W2b6VNAJ9FObxi9BK2&I|Q@#Bl$^2{RVd&Jb}AQ8iF9 zOQHXJq}~<8I1@Qe(R{_D+m_0>rL(yeb`X)mJ|u)Ik2q|B|9N&gmUCC|{%cj^q^?Eb zuBRrYJUgMamE#Vn_#`Ztlg5T&J_HBp?HT1&Zj(G>x!?+E#DznZ+OQ+w$&`UUA2Zs2 z3fq-Wn7msb&P*x@=j%#wuk50fVk4X)&&kB^48kvdgPkxj0rdJ-=UIh6Crp`UyYL(Y z=X0Yyo7YsGNQ)pu#0pp*L&g~$uLZDk+|zCm3lZcRu^xV^`bQ(-`D{VjSM5Dzmz5WW zzumsj!BPwuRoSZlh9LuD4yw5%06i1wls9VmnfZ)I>>JP5_*rku^9m?K>i`BvD&;}H zt%9JOAWSVvi_OV{e`B?z{-ft_R~HPeQ-BK$pzg$xQFm#HR0Rc!fG#h1k;9&JQ2fNT zL?oVsB=5zo6#+pCW=c~UpBT)*fCb-WN(+p2?CGI>Qd>&{8K>u;#L>(!0nzXb>s#Xr2xX9D|WZO~pGDL38|sTt@^*45_&$0cLm^R@+*NnT~j zJZs^m(zE@&Fr=I~R8!^3(%L$XArh}ai-m}Q{{p6;19ccon@sv>@pjbY zmB7v%DxCgN_!W0zi|@|}vyfAgrN#XKwg`GC`y^1m9$PY*L4E#S!Akq$(&1I`7TE@f z44nW=tLeG^(-!G7FGbrL`NBr8o{ApnrmXdQfrlwSYb&HW*I$$kqn$+7@l~~Hau&|K z;{3vTTqUU{e!6S8N`O}73~=uBeQ|Xg13dC$pRi#`7seGfWqoR^@r@)fUvcuy(N8dN z4QTC0xR3j&w}qflm+NpjAwBI>`lpCUY?RV$dxhF|e1pp30mNJ+D0Wje0|My37ck$S!6#Ogi$fFkQ_9M?y;s~|oj;*s zvcDp3&BJ3x-Iofs!*+Qe*n+lJ>(A=S7o4YEGQCDCpa9(Vxgmcwp|ZC$UImI}A33NQ zftGvijd#$0Nc(*s@m#1Zj`m)U!^k9mvvv*G=QTl!)>;|R)c6Lp;63W8kmm?}#0~(l zCWnpl=M9BWbH!Bg#8Rn%y%5#W(aJ{E5!XUo#~dzhz~DpAkRQT-7SpAaafM!)*{1HW z^mbSaze*DVzhJYk`hgjE*G^hYa6yMvTHJ23O&_pv-DOr3W_ZAP*L{?NDPcD!vr03h zz000y@(&OB|7M+pWOQH}(1nL+XKp(RMuO4=pF;jp_?SiiX~wx-f25TY`LR)3y9`PH@eES%h$w)=i^nal_@PF9!|LG?HN!9;*@=5+pr+*BM z(DCL4Sc77CpYtxu(MWn;#&FdaPFsk@@%qIFCI>_X{{Ct6m$_s^&(F9bk0 zk5NszItB_`2KPUdB9I-QPMC;A*i<8W|4_Gp#^5>KDb5UVmVMla52@+{%kBrt4y6Mk z3Mhc&+DQcRnu8Ch3Ukd+C&a*Fh5?EzrY>ZjZ|enjFB`j%!*r)V+ByInrLE<>?@qeIc^S1u1NOU0owg07 zeQlGV`Elx+1~|d3N>wBLrQR7Rz2bhqgFS$7l5q4MxIaO*{hbdT2dQN9JT0KzfYuQi zxgZcgJJu`K5m0UDduUyAl*r$2N>k@l-~Ns0@i`WzUWrUJP<2uT{~pzw-+`IZOnBhW z9lf>T0UJM6H|BtjW!x@lahS{cYFvpA+o;w2=U|OKod+sIKW$nB6{n8ia(-Q*YRhPx zSVO=lC5G{wrvM?4t{dt~RWQ&FC_>7WS>f^t{{(#%V0>c|Ni;`3P)wblckIiEgc-Oy z`PkWfS(1+DxkLF_(g}FnwYHZX#W%U7w^3mSUc0X z8u8au)uu|HUC4y<3qs>R8OLFE{Q+d(Gw>|ommyw9cb0^ADDe_k&B#dBR~6*A5yzLk zM)+gj(*C+_Lyu!B8jX`PkHZ(^KHi9m!A6nCmJ^-q@WovuXHpZwV2O~CvlfY{Pi&1A^ zhc{n1&syaceiWO$yd;F=OfQ`J;IA0nRKuM?ebSzzaqRC*k&_cufw!haO+iGXe#NU^ zj37{TbQw;{PfJTAz1NjMk?E5GpCaW=IS;}V>L;HqdCqgTGC0lS8H&lpyEsZ|1AL&l zngAi;QVqh->PB8A3IjdPv$Xx8vQ1!Y?EJMe>swp4rAF z3pNcnzDD;C)w%W+4Bp-!d`km)QnZL$fBgR^!uumL11tWU4Xx)-m~=}6<}XKT4f`{= zs!ju@Mb%DzL3xg#D#T(_`Kk$Tv$d-@cGGERzWXctZQXFlZh`-yr3Ls8dg+A8OF1Z# zkq*zoD@;>rH?O*6kIwXQd~&^@*AS?3-?~tweqD^J)2Oe!sJJ_{M2_d$vy4PW7jCIB zt_gu-zGAjzj=+B*i)5Rqschq_r*h-Yv3hB?r(~H~Q=BAd>?Tlwb2pL&ECqrG?mIXM znw3tlITFkf3>oX}1;*|Y_!ZFT+1`bk()2f_){8QEy*nfUGcbWTAEG1=r4$J9_6a|tb zVp&b>*Oi2xw0}UDcmBTjj&1o&OZ=>K7jRcrPYtEZhv_ z=U!=5EE?Ux!pSZ@YF}XY%d%(W2eQq2*E3>)L4$WsOrf9OLE*XGJ*@ zI{F<99b|#l^?|bOIGlZQbY@E)%_)1yx-&7>D*{|Ek*YQDG`sE+ByOCpk4L{;F*nXlJODI7n>I9CFsrqk$LpY{+wc7DU&mo0KA< zliltQC4Zm5g;pSgU!){t;0I`S58s+_9?IBJ9YcB|J79dKXT_hRu&w`IgJt{}nl1dJ z_|xr1J~8qww+9Ib9$YHJb;H@PXk$nYiy@n8TCrIxWHq!Kk(2drx z)d>l{JMW#GH%ms@>m6FOC-h)(z5eIt$RsaGvV)h86uGwcglWeo7GD1iMhfBrRD{#> z1*N-D{T}a%k-f&CiRO(@cfK+;0txq`l4z|MaS6?YBEP2(5n5W|K3Wc|c*ZW3n2gP0 zHayTAsLG!LO%IT`h2R3Px+8D6M-2_-03?k12`dX1EZNQBo*!@OoX7QQlE$XCb)5nt z7V3cTLFVC_TB&`#q{F zZyEtAz7QAk&im0+#vpVduL4&B{G*O&d)qoTDwjLi-31hJl>PwX^$VzusP$ZdL2!n4 z)xqp5qfXzBSJ{!}0o0ig(5^mBq7r-kSe?etkotQbLj~=J?+;df4<~L;|Br<2M`s4s zp8P+vGHCuE9j##kgR5P}iuUD*n38lBZKM^)d5n@QaAl;ui2f#l#-77*&0)2j52Mga ze?5VU2_Tt%4mnGmIsXLRH?EaKIW<-Svm)L%HLL`^Clb>;pY&)}*_(+^;tKN-q4-v+ zqTV@?r?4^CoxRpDv79Yc}t(O98f@+~^1{7!5V#O!4z z-*G7-Vrkw)%cJu04OjQ_!qmcNrVN)@KiG3;7Go5iAvKHq>+O?I)rd%@!25{;v1;&p zB0%Hv=}pCiDCe4@7cqccWS3=j#U&`YJ-N42Xr|lHjw<1=b9X{J@@A}m6%O^}lhq-7 z3+U1%IoEN0;0c6!oiM$=bhJue2PW3LSgv`mj(21~yG?7O-Tc-3^GlwX+0lbv zT#q7DjxO0JcUZ-Bxk$R8K~>Rd^sgR=>@Zz@8XA690l^c{M*bvPMG?9ACDGw5vljtF z0kUYisr_oPr^`c1MEWhn$`iexjRvQ4?Qv^@{^~}OVv|nm3N?kpYy0OIe+SOgFvbKu zH$yneSeMJZRGI} z*UeR$Y7k@e%J>P>)e<~j*%9WdyEM>>$i$hvzj=@5Y$m_c$m9sch%YW2O% z*&)OW(8thG3MD+8jY;cY2q-ykwT3@A>EFP9F}DDMK#9E6QfxIc*v555g8El`rZbRR z^TAVBMRa%A36sx*NKZgeN73>04`&Jn1ArfEV%VeMj?rUA<;3vAROfTn8G$(v;E;Ms z)u_~taVv1>7GO(R^3ZJQR~Dq<(VoLpl&`i2hblo^3Q#zJtS>a*2EIQcK|p2Ai_ zlHHUh)Wa<7H1))EB4E3&&ksQS9}4jmv7obTza($&tA=PC!|QQya_RX%sQxEfHMDc# zfW&&qQU@#oq~7tt6J@DUg+_ZL4|B@ub!^?MAxYivYf0IP?;F?Eg>FoyorNvkw47I( za7-j-QaS&ng04}{eC}r#5Ylu_BOWj&V<)^$S=NdU^0AGJr+@ObK7XT;$h04{yFTfW zT95_4&ylcnM?K3)RaIAr4{@voU=?(1sAnZ%p?adNtr&|r@OA-mAt``fCky1*7ZR>l zo*GLVzz4cNBQGV?UNn@y#qV&5_+%r)O``{)jmtTZQO+q-Ol62M=2!Pj5BIG*4B6eb zJFg`l+oUd z^4+iSw{ZR#H96LxpEGp#t2w;AlqNio0M79gkr&KYF? z0$l-Uq~My(K|WAxXx(7hEC=lXP|ULu%jH+Ckit$1NgM=DD}o$i3h5r76h^^ahaSM`0! zS+-C(7gsuXA^1Oio`+YCA}yogEt#3J{?sOjK;Xbugp-xg{&iz~E@~E2Gn_7D&)pf` z;p6*CVF#YPH!N1vwV+)2DnI6W-RI7nlAZbOUrphD#V;`2xoA$(-kAMH>@8l%1M*QZ zqMEk_zNji>w2)%y^qd;(c9Hp=#^4Ug(nn@d-`P}cppUFDJ@9S z6elj|GMZb?8LSAWO84Pn+3Z!G!7mr#7}q_=xw!Wl{dc8+e1Zr7H}Un!=NDaU%Lv*U zDGyu<-XL6;2}Lh>11vy0PB(&rpo4BDT~J||n3HKQ^j-#%g>0(Nm~V@>92|tV`ERb3 z(9oPs2oRgp{QE=r52^YNc-ivEH4$s%K2X|57xVLr>B^gZ2}D|0V=m~aX#8oX*~;47 zw2;8ii7wAR&~)rDM3sl2i5$Z}QB7eYjnB_mXKMmE0daFL?Y0c9apT`bUNSq4J>I&z z!cK9SHU3ZeSZb7Pb>wZQeTX~u#~(XVyKUU1RXaHm{wmW*IaR|XFn|6PjjyW$1#dXg z#vqybNa57Z@u5LuRTzw2&>XUppzC6vhoba_a2`gXD#aiWXfisq8L;HyZGAHxKb$Z< z1^dAC)mpQP#o=){B6Ntbn8mUGE3!U@@c0I98#&LLQfXRaiCj6nNnS@%pM1d)j~dnnZE z*DrtNT0LVa9V>(rOT={yIG?Fio-b2QhR_^yIFZHpAudpR=?ahtH;d=C3A_tb)d+Vw zjVi!n6h_F}P_KTHU|>J+lHqy~8zv)Dsx}3^yHCZ5<-`fwr-bE2v+1x=SW(S_I);;& zUyN&1Rn$nQK)7hyba~;$e3Km=+b~l%p(3}%$>C8$LFXy!Cr$QB=@YqGGo*mYCyJIl z65sT7IWYWoIWfY(sXG->JvP+gKnjam0#EJ?D(j1=`mlomX1zRiBca7Ug!Njtr$ooR z^maqTL8SPdvVdGi9f8oqs=Dukj{ZjtD4&Gbm2E@VBDHBiSd}q+*;OF}HIw1v-5AQ`@XP+>|jzVi~pb%#;BDPndoL<|thAr9H*x97Tkh^jD?leN*3& z)y_7|>ooCRdCXv@srx^L%yG3v!e%Q=zteL^jCQO?jk%&U+MC<;&-{bwWLOj<{dfeA zH)5vPz%{nv$7-78oOK^}080jRlr8!>P(#@dj20 zVw!1R@(BYIyHARiDN59!kIw@q;^B=h?UeE^_lrs~*_JB=;* z22eTGo1QPkokdP$tloe9XA+`-oa9e(l&gP}UqI#C@(DVMxVB~8VS12eZEFtB%tS#Z zlQf5q?(S?2>FZ`f1%oe@nDSvn?)dl^RT!TU*pGewsA^JLSK$i94tvav%a5%#30qgB zNJsctM`lju1dw)l%p6cGOQ`coJZ6x|kzx2pbadMWgUmCRMZ+AdE~sj57Y@OM+B_+Y z8S>u4qQoc8?`go!hLCSHr}T}Kg5X!nr-FZlQ#?W+w$Z9%1`PGJcWoD+@k&FJaVq~= zDRGuLj(={P%Vt`V7Q!kQuNWPvJFv)zN;Q-I%8|F=9muO$#a-LhrF7ZG*6z+ywVy6% zb5~dLdL4&+Aq`cKr^o#JXRj$Tmgn)1{sKNzYe4YRir8Z_CS?rf3PhnccM1LCL(~V* z8hJf~Yj|+jje}I__a0-+LCI{ zxE!jTa4w@i2x=BSE2R6OeV)@yI#p&c3}&UKtef6=T;3V!5s3Bi_Exm{6{fVAj^>eQ z2_ED3mw{&Yo-lC&pJ-oDp2bfxD#qc-HZL8O5-eZqArd(CO%kG93SaN8iWZ8Z^Og?`#eN-jdc3R)ALI`dMa1i4Kt~^^7o&R4$nenLYu2# z3s|5RGv>cZSTHl^;KEEW%Hf?Mz^iWfX`yiXjxROgE&MPVDa8R&Oe~=)Le0TwP)$X} zFN$0X17Zp}-Ki=IwGE972wkBCzO?Vbow2d&3yWdsC&Lv-Tw0w>yT_h1yQ`^bY3tn0 z;DWn?r{=&dFu>YbTkBvroSR~(W)LGg?V>fXR5s*abH1>M^r54L-x7SNWx77Vs}+ok zwe&`QvXts}q0Is8i;OLlx`(M!A<}2?g_Y=<4R``P*?Now@2LjWX;*j7<n$>rx`!As^)!%v!1xQhd&uIwLS{h)_t+*EgsH1&7HESJoamb`JE-bU;LIZvMbaT z!BdRjiS(bRzAH>BP`S3_JtUtS9jUmutJ5(uqS7s{Mgx@CG9A&S$*~XN5%+Ciwzfa5 zivNl1_qa}(L&Oc7eeTMg(G9hRGe?&RYhThoVLGj3$=GW(0^V?#-(5l0kdC1U^Ag|j zn$Ixn?ueJK5ZwVl*@uXzoF0C{8tw>hK}X!>?TgfLQgaoK2GAVTfZ^kf14g+qJP@72 zihP5>Xn8IZXqx+{%Z#M-9@fzrPoW+hhpRkm((B;2mZM7muqRseBYP}ikLI@ZRD-#J zM;OFBH8P<6nF9Y!t1^_uH0bwLN!EW6iF-lON{#&FN`KTu1w1Ka$e!PtNw$nuS-Gz$ zkS~Od|EpFEczQ+DAYR2|c)aemiOX4labYOOE2E%a?SKFnlMkA1`Y-J%{NIi2wv+Lh z$<@8X{2lehpYdPUEigwm=CY?lX%1!h*aD-)$y-gR0>C&3x!7@T;d}qmD|*W#Rjz4Y zAZnPkzU6dK$T0b|>I^`)#ZjxR`EfVVaP=c*!_%J*IiP|21I}*hVDGtI$sCi^82^Pd z&U5-ck>yFW0Mo!Hb+6#5qnLY z6S|DXY}OB~NC)NVDmy=ahLvI+-SRHa7{9aF6&w8KY3S=N2V&ycx&F^HNET}v@?mL# z{amI-g;WLVGnhq%v`WSeR9cq@=%<;KM|wCGN;#VVHjnvzJ8r)K{WIJn<4^rspW}QU zt$1_B^ho6+d?eqn2snp{V!q6t_3G0AL3V9`l0hG>sk9+)z}QC$D_+fBm7FQ?MHed> z(DqG@0OUlKPnbS*Z92~$nSD_QL2SSSyNa4IM&jdi*sg zNk>Aga*8*cwHa$2uBikt)s)S@vlJ=(T7)G)WW(bE78L8?Te?{w?S1Fvs2@onG73+R z(ikIL`~rX_8pBCA6&eJD-DmgKPFCdS!F`(>GXk8)ZNF9pQ;WMtmhoiY z#@)TpCcB8IVmWdtdAJ|$d^{eGYE+uM|S9l70@y55lvS)!p6V!-wAEITtIjHXdZ;;o^9L4aYkTwJ={&!zzE zkGPhqv3}8ki{}^DzJOMt42Ou0YA1%Uuo%PrrTSOHas|PcXkIV5+i?8O1?_*%I;kll zR{cut;aOb;&_5vVvk$-v0gUlYV?hIhF_tm>C5#qa`pUtwCN27L0RM0nU)%2#hDD=G zzWo|G)s^O;FrPkTH3yG(Nff-Rx@`?-&AE9qb4vBrY0u%2H@m&23V+Rz&;{h7XyTZ@ zflDnAklO5odzvI`N|?9iGd^&94*guGncfeb+o|Ja4Gpk2L4D7QlW@>81!maQ^31XR zQ8){hfGB@!_RPMD;MfO2Qgb@BjAPRwnZ2i#Aj2EP2G^%IE!X8U8vebu`k z-W4%6<^yV#E%o*EQrm6a1JleoqmcpQPuav}_#p?4EX$=Rg^AcC9-8x_5JaM-=nr$X4hbUyWa#*kOsPm&*O-k>kqu8tRqfe7sG zUT&7$R}8zcGeQmUc$8;}oEUEguZ9?6ewgwn5}pc0cN+?neJCsG7Qwa<9q!g%w0b8& zbg#)yke?=a9-dq21J>URcc`cY2ghGa1%r}q|2W{$KnN}pT1^zFcI^# zK5SqWPB=ck9Py--I)Kz+w{`B84tFi{i6GGbEdOedYHlNQ(`W0JsTq+#shRT#;>0_- zqP7kQ9j)UuK@Oqct9Jhr1)ss0$@RTMlN4b=uY?dhh$bD5F;M9IO~`7$;zCvB!@-)t z?pAfB+Q6Di&c;L8m)4#29uk1fFUAhfvNHVF-#q!1@;$)$Fm$arJhy{g<0#FW8Vxg% zR1^%U1K9hOv*Hq`Cbf`2cPT|Xx^?$SqUFv0Y`I)!bb2i`#Si_}%#fV)UjJWwEKih*{@sNq(8pg6DS zXRZ=n71AqazA!e5%SYc;8dD^&h(t%klRA}v3A^v?@ER=;7)eHa{MW(C__C2Jfh4_R z7vc(N^Bz8_Zax~VD@SLw|Ksw28x-HvUSIvEj;bTG;Jbb>Uno%oy|}=sTQfR5A}(I` ztR0dQoqF9hRaxB4_7OIzaO(y^FPW$D`7tpS`?|QKG_#;i_(LhZ;l}hC5qoZ$r%I1&0i~OD9BumDYlet`h$Cfn)+#IT<2C|V>WeQzK-`dkF?s- zG`8Cn&|8n@smG2@L@Wv-TMg|M4d`0`rzs2KMU{-|8wV*K1ZPxal>BktkNoJK^~4~h z0`K#r-8lJ&jroB~&QXPF(2|T)1UOQ=(SgjLCYQ*2K~MCdG;0$vKUO{K5d2hAO%dUO zSp#L=-=3~h2S)2iIXPR2OYx_Lw8(>}YJ4b^cUjGZ{mRXoW{>cFw*#mqm0QYOtzlrF z)(Wr3g(*_a!DJ$+UfW6KjBVS-9@^c27-L8E3Ax3cnI=my;jAy}Hhhh6?6Ykl8YcgV z=Q;{of7H?L^okfcei$PK0spmh2hR$C|Amq0ZTunlGj_;g-G@;RLw4t-HA>b*x%R`l z7^;HLO$sl>5g$G7Xk8BP3A>qb)C6Xp0P-xjZ$R3UmldN;rk7jyvuO!AM9n*BM{P2M zT1Ir_?Y4HgC%RX5(>jcEN>Ml&Rdaz45w?7YFvf9>4D-|p(-~@#we*DVsyK@0(N5&R z6i|NJl*Iqjq7M2P4xi%Ha?}bb^a=R^Gft{RI03uY<_n1gLwP$f9d{P_L!s_$dg z?k{yyF5ohZUio>yF=wG$W-pmi)9B?VOsOS8b)Y(fEqhY((&3y%GW(WN?i%&t(&)k!JO z4-rlG2;(XZ+Ffdu-2cjWcbQ-d93R-^ROGPho2Mf(l1zLy-g*Gjys^B+#$7B)3LXdb z(Z4|yFp{Ew__C^LGkVKVz$OJE?NOJ%+i4)}JLLECy2hncF))kn!@81u{QlhHXwxy@ zm&sM5>Urg>=**<-ON?m@i^6oM_GD7M|3a1h6ycA<;wLgCKZibcz~B^!xpEy<1();i}PtXa~5htSW1)@twzU1%A>tHdp?z zKfqRgKDcSkNk{GLs=El%N@?b0GP~eC`HGrr$elSEi=QO~o}DVo_~kq*Z|ihv4u}DS z5Tu;9Tx#|iQ>jO*BulQ(k75&d2grCrPa%0VK3Qv3M^&KCR*g^gk6m;$ADe;v<$A$` zNhGL&d~@9VK%@il9ZLTK-l|q6$j-p!Ks%Bl1g=zL21F=#Xh>V>D_SEDtEZ|;dVSm6 z`>SWAj8A2j1OFv)2&YwYen)>p+gnQ9+r?P>)e->y38TXpB(Y3vw}0W*H zoK6suR(&fJ75phMyn(yYEc>^~Z{BAi6K0t~g7tVn#tZl*`_xX%$|42A!h??@2t$m$ zfx=;g<(T!Has;vo>IQy6 zw-IH5O{xx7+28FT#tZ{PCz=S0Y0TvAu-kRyk-I`BFLpa>BQTV-Q~cqu%%UT! zolrK@u}$!*3M9)s``UE2N*1jq(A_&Qc~CrD8g)L1w>C45KB9jJdSQ;lQ{Rb{#mWa@7b$dkD@F>#slBY0e1heuRP{x``Y53|`nN&<<8qjVZ2^{#xU5_(DC z;ZB!cpOKlO2Jw|@M5`PaoHc;#&BxR$$=;fh{-u18nd*okgDmQO8MgHI37ZOwliQOa z^W9$F;hc{)!sjdgFW%lX9LhG18+PBNMdB`GHx;rcyM(zV$=1Z!!(pJH=|Nr0rw}?UK zChxwCFFpA8Ir`xGh62`_p8+NPI=#bA=-tx63AAO@!^CbBH~{%;8DxSQtlG#JPONREWCzW zar!&j*{$3{aV&!Gcc!BU$3+ajGry!T^45($`^1=#ZcQ zZ`vlOX1lES4vRWQ!5-g3zAX1WGHmqXo6uXoAFK-r6Gw-7Z;Qv~&E_Xuu8CGJGks@$ zcH@dFCC1wSywCU@ScYy;uMEcKh?tCT2>s;?t5}RDD&)Qo9f{SCdTS|AmlGYA@!G;o zX$-E%G5;{t%_Aaih*qR*70(3`O=>f9gv5rw?694^w`F?Kza+0?z+IU)$^GlcG)k(W;mb}p8)3Ma zRbtmro76E|F`WOuLLHRs=C4|o(!IwC-Q7&f-<5qRm(4?83dHy!-Di76V$61zd|Kxc z6k=|G5R;SBQx8eZ=dYDjqh(9Az*Gr)@#}*YL)t2*Sm87BR!wFzr5!sSkiLg zo_5D~SXXomii=l*w!6^&!@y-Waf-hy4WHq&z5KqG0LdVc4CBVaDvd-%oH!1>N@Z4{ zpFUW__P1tHTa#`30LfZfU@6Jpp?bUndxr@ll;o*xSG3DLr>RNv}eV1>2z=hK21`$o9PMd5^uEYtbnosDbbD zJuDxyO;4GbN1f!lSbf1vp7+tH9w(%2xxR=Ai2M!rkv(8k(#Z4<^>FYtaL%@ z1|ucRLk*XL>|}*AN(b##6LplVEZdateTR!ngmLtg)lhi}tZi$U*+Cz3UpiE2cdAup zc{yN9yN0+Bbe!mWMso)|?r4C8P?An1sm=vqcmm zdjr6kQk3FzJLULZMrV>2nyA$6L}P_zsM{phW64#KETl@MMn3w{PIoFCkPgxyXFZC0BHXE^38ig4GIEF4%By%AGUB;YI_JHhF}RB@ zA8g#JIXN>fW>_pks1isiTD%){zcpqv* zH)+3-D9#YibyLX355Tdp6X_qI&L(O>{lEEhG65;?U4-X$a7kA?y8AVx^CBM@ z*xQf`($(B7vzqd-{QJRK(%vqueeP0|mS<-d^2+J2^1hq+a0sAlMD?mYwur9 z#7ooUdsNIx44zi)t-d+W*1@4!WHY24lqj>Ay{93m00o4Jc!*1IrQG@6?$f|hi^DF(-OF$;VdxoYsbFLy4 zyBEIuBQ4HVCt%Vt+W#XwDa9B)OKmi(2Ttw&TN7N0t!ms9IJ$U3O%2kn%+skjX^@mn z59}66q3MjA|Mo8TtZc;2{v4_&{9&P%_ai&7mI1Hrv`)lF%3zC)(%Z5Qt6{4J?}u5p zD)-W}-e~ix0me*d6`yLBNGy~e=8)2ABLAT+0Z<|0_g7p~VE!-J)Ce@9yB9c5ZhzcM zfDe|bSQscoMm)H{C-68Ony{#G+T(f^$i@;}Ep6$h>X;ExvtU1|;hySMRZEQ;woDg; zNhBUAI?{%dKJMUtW<)#HeSRB0uViky+WRw~KYfRJp^J?EX^Hh`C_>ofousS81V2ic zn*)cd(DBFHB3i$aLU+l@Bu-b-iL(6h-2lsWxDi4R&ZV1wB#RE6`Zm(H)Q+H|3-N$f zV!%xkBP!C|%$aZF3Opq4Fo`SR2H?p!D=&vV6&2I^o)8uOv{t}Fs7O6^&e(-YsKb}h zSH`x9U+;A>YwdAZaTA#S0-c){rf-~VuzxsDsrwp&g;HB8PHW8=SxNFir$TF+-cTu( z9v`Tt6{m!gI?NO?UW_4CO@`l0?@(m9_AiK+9RnxY*XFzKpp7--p%*M7Fw z?HuHO@y>(rhchGh=#t+%FB#M&zP2eyaGZ=WJR=j)vw41}s zVdryB&b+g}kBbfFOx4p8MjiVas586rNm>YH_b|)RIAEyKC)poQr9Z@Qqz>z++*-vp z2mAdWOavR6>SNwzqUfWa{#qJ_(+yW`iBwBb&R__?*4a|nCOl+6T*7~u?{;Se=-EaV z6LdOsf7EEiioZBc3r9zGux+o+bwj6D(O-Z1B6(RdRlRp%m=bFHkeyK24&SF#MFTtI zZ0mQ$0eAf`yur~Qs2c@dF=XlK@uP$}LCx~FOg{S8P4Rr=?gIBJcFiO?1l)8<72jPZ z@u^N$P0kHjx%1nsQ=8j7IS+fHZ{DZWGmA2Wb)Wq%&to0;YBoj@j>Q#~whD#yidtHX z81NdYRvKPHOQ8B?nObRA2Q*(Vz6}kSy$QV>eIVbyvWUkWHYHlb95;}Rl-fEmms?s` z)@cpbhuOjP7{(kBRo*L+h3eC!SyHqjpG|g~#yB#~5Pp!eClV6uB3Y`K5lW%;^|9KP z5{p%u&feD~m?o~ux{J4insKIbZZQRaT79^F1T)VVvb=+w15;= zJe!XO5<3J>h0d18**Rmp@Ue>HiJHsImfRak_Q;Z_f6X6bJF<_-iFfgcpzXCk41_Nr zUs}0Ev1)Gx+2pf+U9W0EYDA-X(mO2IUQ1Cp2s?KynE0_a!+gdP%`kaJjuT$`QCuiI z#@s;c$%8&??JS+n{c0=g^$A0Y{MS$>5mesus#g{~+Xk&>0wKY$3R`KJfFCQJdC34g zbxZBMwNh@C>uQV%XxEAQuJ%pKTkWhI&!GE}A;ahPCE6Qh+aov9(}sHO((w81)Ck@? zU=R9x$2L69{-yXt+#j6C9Pab8!#h}7z)l( z{29M-aob3k;3wcUgUAWrwXl8>?vD$faKFSO{wAUN3^>@>&D7(x;v#g8Z-sAGX3AZi zcthA^XK;f!FS!|ve*=zLpHB}HPLAgQY+;)g#Y)S||Ko)E6{W z-IxRU;fpz0|ColHF4XrA+h=qgbByRMh(p~l57QQd`nR=)Kd4Po8Zqwba&Q+F;Y+Vc z&-SZa@hVvf2K>W@`1+kEA-ptN@K%)pzEw#bTukneh z8QCSp%1df#jL$2p7^oY~7;7FJgYoMxMaOSe2kj2MnTXZj(9ZEDe2lH$A5a|M4xNwq z`fn@Q%4wS00?g4rQ5hpVt@@k+iy>bvf0ST2FC9N7qZA>sM6n|#xL1CP!j*(W_~SQN z-@Q`X`P4*V6GrQ&@o}}yzwivr?UkJ}uTyskBuQ;($M7GvOv;(<6|i}~LAHDMu0PAH z4YBf=jtP071q7F>eAqTOdKZTvzGyZ)Vv3IHu%IyzK8lpMPU2i4G*K%&w$As1!+M)- zCuD|H^m`|r_H^y>u|@ft3&D|bK8xk6^ID$}^W2Q?xlO;uZw&SIk`8IQPf_i}hrNpH zjb#S9+pCie`&$X`Blg5N-jOSn2JvHt#>lSPd439HrY1dgW(vBE-#FDAfOK1Wp&2$h z`v9W#7E&9N8#TETI<@|H$CGGo@{z++EJAg8hM%H;z~`eR^qyz2;vFtStV8ou>Hj$w zY9w$(C2vPAgI?)>rmrB@B^Zq(`7GXbcGiWUcIQL*L8PhBb)Vq_(I<^db#!n3eVzR| zmh~GbV34KeLK-031Q-oW{R<4gnvOh{+A^GdyKSzY=s+}C)2T5;750dBp-vf?FwTkW ziD@WEn8j2~JS)h&Ak;UipLoGQLRnr-ciUxv7ah_hOR`ROfJ+*vnD+g(^yOK7;s*Lils_-r?SVoEY>Bd!o9+UeDUBy*F@qbK@Khqm8hvkX51 z)8f{GzqsY-YqPzsFmDnTsu?1Pn8FQ99E)|Ran zGF3HRhOD_AWVoD9(aq&{9-C&b6&Yj{;y{L1?O_|sOwVjC$M_}V)AOoxM@60PF=J4f zg+a4TW2qJ1+Sue|FYkD&*+VQ*v;hX!zssr0(_Nq2V>ydN z`BI)T>%B}ZgMyR3Zv#`*x|l}x^6d!^4fw+rw_K8l zi+-O|g`zr&shd6z?6aH>at2k?*CMD#Y#8x{rRDG-^7E^uEo7sQGyuKr#J5A|?!FL< z!5vM%x@_?3ixphw_!ud*(|Lub?Kxp0JuPs^{oz(W_&i(NM7C(Gmu~IW>?%=R;uScr z^tYPvnzQBu=r?;#suo6k-n$C6V-(id%Ew{%yG0H`24*Iv`#!O%L}(Y2&6S;)h?V61 zhpfH55H&8I(Fsh3il%3=Bmdw2y4uD5*XPJCA&$+huRss#;vw8 zbEKv|X7=KRvK@oF2Q5hLJ%OK1l2^Z3{tJ$*s&+#_nRm(To}-l5-6EOw^4XjkF~bvA&_Q!xGd|oa_*N09r5VUGV#9prM&_OJpcxCcd>gt-o<%$|H)mYu zAgESa(Mq);^DSEU=Td)0KaJLM{hGvrENY>3FH~;L6jiEH4;@=g>?&H&++1Qgh5(+Z zFK<}N!;{>JPc7YjwXJF_<}aX>R^u7(73)*fNAgx+?oh482Ev%0X~ZgOUK5C9VvSdx zoyX%@GNK9^Q*&_cgzmxKB}^k~^E}pnzGNkUik$r$cGQ*#dXj71^OPr6!hM#UXZ9gK z45{JQ2Sm`9KcOKF+n1_LwJq&lCrFwd8D0qK73}f6V)?;*hf7Y5IbYC;Oc}f%->%?r zrA=eSJv+Yb z_!?FH58F@6jg#By{~$jXz3+^C`%|2bK}$p#BI^ibCSrd1XopLM(y-;@O;W|@WwD-d zs9codg34W)#e2 zm~`WnOdyR@e=)~+l6IZ>;#; zNOS?R4TqliAri$fW5%f7B64E8^S&(K3zphho%riBC|3|srQ}HUn7kjo|lhH`<)&bc5Tx$^ z%2hrs{v6v~?u|T{+F8ZcY5h;vS>Ox%zaL4X;w;|r8`TklD~{!gn%Zm2bz zOsJ6emROFD0TiW!j;trC-9>95|L4I}LH_Sx%DpyiAd!WQfeL%AHqkJehqbY??r|Yr za!NxDYvm_M1MBS_HBL8iB5s{V2mjdPa(Iigx@%J8--O(+^OV@fa94j2!77sZa?5Y6 z9y{PZ*`FT-s!i8?E-#8EBi+~ZV}sC7^wo+}Nw{Kr#LVzsdh!5=W?r_iBLZgQ5Jhga zK?v#SvAY%(*$$31j4CJL(sKWUS~$0UM;AY^EnXJ^r2f53Ve>{Anb{&1ME_ji`$U^! zWL;`>`uiDptJR|+-5804|!1+>GA_~*k90fX+hRjxH`1!vvQLyG-Pq*|#(XkujJ zv=dBuzIf*6jps{#(q&lCSSz&-cua~{L72;bzWPI2nO8o&d|?Fb@RXPvh|b#CmM~w( znWnP95j^#*)5d&yoS$*SP&HWfQ*6$I2W`G{lwq(-CBsgi4w>$B@v0UKw-1$yt8KAs zQcJx}F@b?`quA8_q15xd+M1SwgCps^(Ah@QZFVgfSH9t^M50DU8>UHwZ|}6irN_c% z3*S9d&W@VJF;gAUIJ&oe_}i$s6SBl72PL>TX-3plS&g}3zUhw@0W2{H_O6c^1YjDT zMKl3jvapq!?ri(|L2i3@oXqtrcAUC!enxm$DK2kPRbZ+X3wfQxUGqM}&Ux!M;KR3y zieB3~pSs7UWjm_Ynk&L(Bla)nP_hNg=-uv6*zTnEH6)*Q3VcDLR1oqjTigzlKat{A z%Gy2wjit&|Bfpl&%6Rsh80alvyz+n%Jf&SEYAt1cXl`v~C&JOKS2YZHSAV;1+^}*b zz&S6U@I^{(m-tv)5Vpz3y|vkZ&)vG6R^Ra+5FRo@k&pTz6W8>M+1yV#jJ|69JcCt! z^fUkyTR??bcq5+;yDHmi$^{Okr5h`tFr(-&tQDe4645 zjHqLnpUKCjSewpDd(_sWye)`Ez;01B*dMq9cmvbji{|;ht zusm^%LcLt+eH+G_cctDD2nF;m|APyt!Wi<=y;K|IX_llpjNwXJDxv7Bx%DBliEMOw^fcPUDB<-YKZvvEKv@z&nx_7&7*?Fw-22k4(&(4=>egI z1)t~cGnVPe)Oq~D`t6T-q(kB?gDEo{m38;XEATNSI207;2(33D_t3(FmvQK zWQreOcKy%gT`qIu!W%Yf`cQEAl1@c18a|RM5JX% zEI~CN+MtM5m#)ddh#iMPbNl!+dj^WW!A&lY)7AOIriotI*}fF_a)!R?AB>wXjm8-5 zdxo0uTQ3&NmfUUUQhH>!^6Wz$*R65Jh_G4;I4dWVBD+M|sxtULSlJ|SdeY>07>zk0 z-~ATWDf)LO+y=KgS(fI*7?6b~7%pUryIdPDu6OsSm8ua8kva9;}P7qv7= zjG^I~>;tf0<1qRkHX4+9WY83t7;w{`45BA#0RwBuW$Yv75^HV{62&Ap0tM3!?C=yJ zYX2v4YO3=O+i$Tf9P0tH`~BNzirr2hm_juLS<7>EdpoVq??Zn@7BkyF0Wt_T!x#Gd zaxs0!3rK0m)V4oteL5;+#uRt}6Mr=kREQl1rZyKo;xLy1LvARv!YWBKo1wHRx>Q zDDy0=n;{B}(SS|4jt|foaX8}CAmFQO0}?VGkv(=c)_*Olk|fib zJYD?683x_C`I~Qpn^E!vf2apC51is{w&~rZEEWR6iMB|?ZU?sPM#05e9@6B z^{lm*Y`Qq5>4^A_^`wQX>=@Z_hP8)D5-?cq_(Yc-59lXB#mcfBvYlf(X+7U8sa6-& zz7S^*<<4(6gGnM1RrWY-eDcmelfubDJ*nYb-=}WZsY1?S0a1g0(8-QxJs|Y$i>N?{ zm=Tw4A~GRXM909idd{cl-ZwIWVWM!rOKpn05ru5T_>Uz^#2HTja zN%o3v=)I3Bi#vRp*je7)YU(m_66&d%8d|VTlSmjT%LvX(I9uJuLy`U+sZ(z4CE^Y%T+0R|C@G4vB^CH4D-V1qo z9!?aEe;vETToBAOB>R%-fE-z2bSqMUL^w<#in!#I%>q4<3^eS;{3mzpLeEZ;D}{&y|TL}*+K!3WPQR}Gh2q07FR_p)pEo8PNb*Z-?_b%(aX@mpIhNX4y6 zxfi-_Zph0r;+Zg;p&Fzo;!nNsC=BH(G-D5~_PV2N8@9o|L&yX!*CbpCb|&WmVymHe zRas!gn^w)8649>9g+ol`poI1JX-!sUH>cZ~2ecASWUP0`Sy?+7u$5@G$ecXd_ZsLG zM$wS!1a4C{HrieauA$&tji^Ydw_Cb6^scor*Ni8YQ+G50AX#+jO?MwpYb`s^^7*-nl3E zltfA~6~a+*xK?sb*Uh2(j|9SMn_YaHQeH<8RMpZ4e_{F1MWqv=ha8x&UoBoPThvIT z4;(UKB;l_rnVxpbGWqLY<~w{vMYL!gLnpl5*`XoJKWq=Z_8IA8_9YmGub8^MR%DyJ zz|Xbvu&y?9;4!x4%KC}Cd^sASI;MEwtD4sLWa9hChC2iMFzf zMnQ5ysFK76ua$tJu1Li7xS~Z26dhsEa4T)@Qs#Ws%*isMPUa zQ#Vd&aPJcrX+fsr)BFyb{9W_4zr1xm_Ro2jN>kF)q0Yi@I2RkMspahIcQ?E!X~40l zo5xP$7l6h70yVCNpzpVVDj^#159rJES@fwlI}QQaq3huW<_t~RsUd3P>m~hz$M<|y z(t5k~@?HHpw|06>*hO^!S9@$f%HQ8(8%&1UzF6s7F`#W~5PEetJ*v$nqOhumBVJ69 zIuA}x79w-)cfdz_dBYEd)4z}dc&3+*TV6X-Wgp)|enornOQ12r+Pahr`)FIG2KWuS z)f1>K)-FYlg#WPdq!386o2yT{(xN#p;rH*Dgx2jzdk`{jj2!L?3WGG? z#g$~g1sOT8!~PMeabzzfpns5@N_#XFY-xo>N+=}Lq{gpuKA-y1xz)yy_V;eYHgqAo zcrE_0<-E`)E;j#!`T^Cp?4MZ{L2E60Q#bzd0nFb*#9{xSFG7zo-}}~G?C!#) zjqmOn>}rl~s_+oql}X;AA>ONy8AEEh-ei{jTb-NX`K0N187_^sIp)+PljuE~9CG1~ z_zY0>Kvz8t5;pc0Mj5y8bWo0$ix1{*ic^lyr<>jx-Ef*uEZ*i*RRzSdMU^b$6QxZ% zLmnEUr*E1t>C_0svx_;1U)h^dv5Js5SpC6F=Mx!CH1q*>7h;_`xjfDR1rUdQcszG& z#oF61l55OTQBfBUxNyqWJTYcy_}=yvmr{_oT}-J7>Vpr=U!p_~wFr1*I|M|MXha|9 z`Smy4YasU*6jG6w#C~rK{0&MSEVP^7mN+K3R?X*@ye|QUO`gv)uXtD18pDOrjqWzIF`8y+5@JF(gfM@Zk+X$al7hjX;FtK&TEy#d*0V;%?0y z1kaBjK|}w$oT&pnFRBxEcpM!194iWt)-Do8Q2AZ!T)UyhxO-rInU074ns~I}QciWN znHfVp2fG3F7W6KeiS+_T0gv~YWl^_3%ps@;%;WtgbV5Tj7g#kP!Nbr|ThJB0EayKL zczRqox>}}Qf`Ia#QM&sW+!u6YqU#zGDO0a}Hyo3bzupwcEN8!D?1e+}A}E8u2GiDF zfHwz4_C;Dn4o*-lVwiZQ_eyw#Xa<(YJZVxiJ+rkFotss~3;Ftxs?}NbJOCKnk|up+ zBO)blzQmVg`0qt2?nM0(sdUp^Vy?1cmd7GV6DoQ!tV~u-@L#%O<{kY-zpicdRmheC zbJ-!*7Q9*E1PF`lkfQrGPm_kj7%le2z`YKVp(yn!(dGkm#s84I0I~Wi>dIZ{I&u|Z zad&24h!^kRwBBX%CdHdW%i9x_osZ)>k;y~Wqh{$7NMEDpq2v( zk8>|gQ#-8m+Yneolkj%NbqMFwmMlp8sWIvPbc^jx^**@T;E@SA%4Z}Ayf*V~q(Dfm zR*7LYweU6uW9y7!UO*m8mEzq&ws({3bvLOIkmlL#VS|}nXq@rOeEKT|euW=27Lp&l zsQIPIFWmBga04D;M(jze* zvubt=dUmmPBeQj?*|7Wm@}ifgzCWhovJqGf2;^^`=)t$hhUjzm8KfiCy9vW?OM|O>IO+6yOvcw$Z(8>WU z_^2Mpc(r*nmh$#Keg}sWP+R&gwVO!S@`21<7sCYC>e_w6>7(fY~CS(?obNF1Fdgyl1 z25|?*iW2^O~nSpeTQRdidstmt;o%1@nk~`$i$HHJfoH7awm+=)(K> zc9uIMg*v-!WS*WNblgJ@bHu?Fy{PH=loff;Y3Az9M!qi}SZ+a&lX(>Q+|@k9d0_R7 zsjz)7$CNTUaocFRog2Ef(ilP7Qq(fJD{qBtR>8;N8B=xtG+RGiKC&O#aID~AYoW>j zzuqI!8UwXsECj_-Y88{o^QJ5o*tP1TazV^)kDE)%vx|hS)^to`BWJp#`tPEWqTC$& zpY|s_vU^z}FvXOsocHdv-kOcN0f9O}u(WXbEFr%BzemKsjxuP=3Wg}Wy+{RIR9ONV zcJAf*Y<-X*wMj-$LzrH9vZ)HgVgHR}1{Ne=P*`It@RkD3wb?l1~R$xAT@{G^$k zovIAIawA&MEL+ivyKQV0f!;z{l*U3(ucTMJDjT#8 z!w-d4jDGtBKqBi{zwbm2?KD|c8qift0RzAsvSDQY_}|(uFC~kQQy-b@(=3|2rKP#k zlOz5;6_iOxc{?oh`m2Ry2eD21EG7}qSI{T*_ETvTKo5(^nEt}?+EJAyD_vMx77N*_ zB8d^lo6e*(fRoFOiCx*78-yuvd#$LsTNwn|ihxw>!b_KM-VUYC)txDwBgj+uG8CUS ztp`GR`I$+qwhn~G56P;$FO%98+_TbG_64l950uNx+M2^f5EDvAbsSmUZC z6>cuIy)->8{5CrKqzxR#fJ0P+EiJlvhaO!A4hrs^$OW;4uW{|RV&X%VXSunrOB+NK zCt_1BejIAP-q|%o-L1fXolAbqeme5ByN4G3acAAZQ8>U~U^d5Wpvff@S)9l%X3&Rj zGhWRpRrG%SGITQG?oIFEw7P(+I60~T+h^L)lEf~?c8-m=Ht!FcDU2Ha;PJOh>iOKy zI^3kU4wZAfm0pq!7h^viFjN+h3xDU!EK$N-GJ$>)x;PQlJ96dyJ4x<~917plcL%tQ zWaRSFuk31uL+1n~%L?h3t5`-ACIdxgPN4j3;DZ2NEh00&HF%VOXC|J%9p;{BB%Wdf z*x`ex^PEM1l+lKmpSEfU7Z;vxwMgrnV3 zyR{w&5v2RqmrU?bD^uE4Rl@R(F~t%)opu|mW&glvTJ^C@ZRMK4&wpnqzOv@C3FJF?d%QBfl27kj&x;`TB<$KLg+@X9)A}EAcsRc=N~rr1(tA1{tGe1S^!vGUH_Ic0j6wMJe)iwmedqo*QIOI20uD2}GQlVOV2<(zIs*WZbZ7u- zJaoP7+zQ!7Pe<$#pBZz8b-~=k{Kx>4Q4hLCNd87X9lMkGvb>2x56^FE^1^l(G$jsL zEl7~&Kukno*PzYP2YRf?w?~lunjb&Z=l4D!xqsSXyyIRw-e5_4m(Iotk^c^h2<)6Y z*w{QE@2vEH{QBB+d%5BWyO!m>5HdwRQp~0LT$-@i)-~_whQ5mW;u1Btt^^>5M zUyzI78TF8gc?chXyKd1;fE{c6!~TBO#ITy>@L7^b&ic&whhoUg%6@fM;t4)Av7BZh zB-OOp^bK-Rcw5|;x;!)d@e`L;k&F&` zk=UfysHxq40hH>ik=;*7SoZJ^**%cq)9?QTLTZe$N!?y4k*+*kD$xfLnUj4O;sT+? z)9Eh%ShJZ^By^*pPI0T@58EE%Jga@;<y zU7JteDe9#X%1CpyU{kn!9aAlCs25*OD4$B_`Fy^Dw79Yo!h#+!;IsfR5UtvK1!wsw z))f_XE!3qUGHC$w7hzptxjJ@m(55dO9A@Q(tOdMJxHJ{Ty!d>6h~T=k%fl%AD9l_rx?znN$c}4 z+#D9R<2uMo*Ydl$y?SJ1)@ucy+uJ{C>3)T}a;TamH$xAapxF|ms`9B(-UN+$85YZJ zXQ10gWB+1?R;OEv=B{{%)tP2xIrMoS)6thCE|C+e;_&9z;q9M?&kO3b8H7G;vw?Wt z!3i{mV_qsJ!$+)<$8+0VWR|f?Fj#8m%X`s{i6|a0<6V(uzpQ`bPCIL3kB0Q=l!$+M z!N;Dv8@05sx;>Km>Xp0{ge+$LZ8^(4H}P;aTHbkp(vHA z$O+hCf<12`{t0D;Z2(-^GE&@Xa&QtXm4$T6r|TNY98_pP?uZzFoO8Swo3#r#*q&lV z+{jqN7{${NeumE)*ba~@(+-_x2_q!fI;JG@LX>PCkwFWfY}ss&Oy_&=#kOc`BA{n+<;UrZLXmVUj)EV|6R_UM1DkVK0YcxhTMn1KU7H|{cL0af?ByJc0!ykYfl)9 z70@R7N?<{B03{>O2EYmC04`f!#u-lv`k?n^2BO{t1QU#OA^fSCQVNll|8%P_(O*0H zUpu}z8pSj)lR7}20jFvELM}>@E;C!0c-09e*>tlQIDzbQAhns;Zt0(Y`+dzptOe`F zM%T*UhF@SV7WQ&p8vt#(KsL7>43!@*XLp=}m`(-f?nH?Gh5fC_SQY;Lw9ruJXJB~a zMxoy`DtbT4L})DyE;+r6gA@^7Mv(p7h>uOj$v z^w}qdi$q;h0F;yIk|ONEcDiM<*&j9$qR)8387)1FN2_h*(FNGP++bN$Vh;B*_J9Dh z-{XPk7&s^<_^OXNWK8FyVM!en1idpbAv^Di~f`FDb}AGV_bqkP9(nT zYwBOS3bV^O}QjW)O()a4Q9HHMGV!gds}xyIH5FksQ*CR zrh>1Pd`)`NYG}((EvzK8=8nOcQg*h=?=luj@YSd6k!;&|BT@HUe&`Q$_2@!Q_M;Tb zc1Oe7f)s7-ZC97#EcFA5;;f*(y-%bq7W{`PMG{Y>8NLL|=3V*<` zX?alWkDa;Em|m*aX3ZWL3a9O!30>~J?7Ov9?&hUhbJEd*_PX8Bb*9oPhtp=O=n>Tc ze2`J?V409jcr`;ybIBdTYYy?@V?Azh)(l;Tg@UJDuX8`Aq(`|LhpS6S%d3-j^i(z`^P~8u27a z-Jy$HbECO-LJKvm1#s%K<+AAynv>&cD3yjCG1G`)xEZ2WNl?CBe_$bi=z8aV$Ohm| zt!p3qQNzt(kMrlevzk((xloXJRVZcU)^A=L6wiKGUk;>hl#I`-u1TR%Gwscw&#{Wh zt7D80aXDyq`5d9}6*BP~?$@_B^V#GC?ArZ5Y)zJ93S)3{*4*?Twsgr+$cU}ptf~gi zErY)6b%-~`K>IwKBiq$kdIs9%8V6#Po6HJVor?OIMq=0%x|SDOv2K6e%tH(XsiOqJ z&6sU4wTLmaNNN^vo3WD>vDq?i`ZdksubYmRDJha&%tuLHW0pTiHiV4VFX9&lmC6(F z`^TZ{#BQe)3%G0PiW2e5e(g9)Nk>#63i7b6uJp>@r*LVg>oMgI&MRI})U=G(^sS;6 zAO+1UOSw-BL`1<0C?ul|cOv#5P9%VD6^+?RE-O{RLA#m}s9(;D^auVFT9x_S3NWUW z!ngNt5T?F6T59wrdbIk%cx6n~)*G~Os!J(@h}lyJST~6()93|UD9=Zkjl?r*u#GL&4L%Tv3mnvxvRGNA86E5)=05qoz z{W%y0_N=9U+i?5z6*f}n&c6AT3k8HPehw1X%I1E{E#>Eg3k29T z8R$5vV;>?j4SD-5+SEkFG+0-MSW6#&o4AtmPiCuCXt@=aCcabVt=B0CObc_%%_S6% zk2!Xli-osvKwG|h;-j&2ycG;pf@c=DtgbC$cyAS^K&4VN#AKh{)(IE<@^_180gjuG z^P^pZilBFdI=4sfYh1gta?RLbB;jdc*PJ&#Ruf*UR5Mi&s2LC@ zk$TyJi@nN~BLK1GR$*$B9*K&;t^ z#BAV7O5(h);!0suZr;F9hAnp;z98iz$t?KcdPM2)>`FBxEI!ezMCFIsC-@u6(6CGC z`F7Zw)&-Ed(_06|E4`kWuLB5bArR+2$qC&9AmnAcH?EOxU4>hFj?(rlcOwiwLYmErh5IJyeArrN)c zkAXp`g!Du}TBK_*5$PD+p@5_`NHYb6#}SiG8Qme}Xhek3qick;#E8)>p7;FTKVa9j z>s;`8Ym-askm_pqYshh;K_ z5eB*rI)nu#95CV907|m+h}^=yC%-d?6E_5SzmG3=VW7b6Y1LC8kYox5%mr`Ar~5HS z{g?hV+{CLAAkv~Xx@-U@1o>J&v5kKtX04L`HBp&cxk>7ooO$l!Yh=x4h@dTLGS1Vw z{Y$fG#IfVtb`3d9fl{{L-=}y7{M+{Ua0fsaQ?wcG6DhU_u4JWlO&p|oeJ95awWIPo z1&x*4cb@zA{%9%K$4i_($)PNYvTeu$qPk!|@Il;(NFiLR)Pnle`$EmmFCT^jgG{GC zCGs&{)BGbv=20at6AYlgAa_7p9LSZOUpIM-X3e;ZO8YE_t>b=8OurFbeiL1U-9}nx^l6xH6_bY0R zAo3T{L#{#U4aw@A(l&bUH8RDf>htZ?2hC$pLk>G&hEW}T=-2Y1veJ@bMOu6rEVvHP ze7RkOLZNCrRc1YN{H0tUC`VFidbWt|&QP0gFQ>mftxXvpg+}J)RRU{VYJ3H2`m3n; zf{SEhI<~^g?4n!BJQ|6mgv#hkqZ1%2nA8_Ov(HTkQpjktvl9@bR{KWHkI)W67>>!) zS@_?RP9ZbZO%`*&i}{{P;Al+p%ddS(Ok{xv2WKV|q8DU7;GaMEWu2EB)#J|(H}cmk zzg__nfR&!ACJM{BCmD$3gn%&*GPe*k>9tLl>rwG2$vBIas{u2v>XMNu1!^6uQ-5J= zY9omT(TL4yv%tKdNf#qU4ewQGj zyFr&9w|_>(e&UbMp@(%H!FrocVipZ1_3XH;9HlAK%LnXTeEnnvGKG4fAS!e1*jc%~ z6wgCq>R!7dC5J6P5GZZ$m`M+P6c52Bgw=mxPW|)%5A@XtqW|r2m5H2q^x$@{++cKN zB|I|~+Eh8{#DCP(a@)|oa17{B*Xse2>1NB$X$i4}U|UGqetu!5r$i24$C527QN`ya z({=8#?n4+s)m(_$t^01uRRvmMTds$Zh$~;^6--2I; zN*}rpoT}vGBgK_zm+k)k&FynIk`?(*fY0u9%xBu-2ZkR8t`|qh!GVKgZ4oWWRHf)& z457XTmib5U<=k*t8ithVxALtNJFXS+Yh}AWeX;+?QPVs53H!Cm#Jcj1me_8I2Kgk< zDPV%@8G*H=(yd1K6!g&Nm~-PrU8@Y_;%^)Z= zF~pLKp*RP!Q-dcV71os4(Nc~J zO$9xG>Py~`fq@AX7bfzoz@_bb%m3G@D8D>6s;&+w#da+$DGnqx3in18(bimb&Jmm5 z{C#sI7U(w@^Si%Qz-33!l?y$E;V&?)%q{q7vI+TkxwY_h!-)y{Cz<}D<;z+OFu6;O zo4eY>A#AS233qEj8<4@m@;;5L>|rZdseOr6it0;O7oUgjv7cfr6D4J)dpyeC6GLE_ zxB-mKYceN!g};s!DGq)({OG`uGm0`bRfC7{g-hel0A5fixvN*aTd`@SH)GgaMW9;k zV&qM3$yHRax=E&{XHyA+^$Rd+0Os;QF(@#wQkj)H!yKvD)d-0TtguJ6H(-r1F~fxh^l3rsO_iyoy}2weg^5M9}9Xz!g*`4JJj~?@15Rilk-?wT=4}D8@n1EPQj_J zV~Y!L+h>_IPy~Znor8dA)4UbUQiiB`tO7Wh+05y%JG&a7%Lu{2m9YKwZI`#l!4E}_ zYx~&(9*9P>qXgPq;D0NVw!S)U!QPH|fe1h&V_oCRIQXPUfv!%TnJxwQw}GK9|9 z_-kFaTi(0o!W@fP7dkpOFz4xkzLVlg3SsR2?``+aZYgt~(*dAd5qiDiX_Q=gc|p=S z*V%%XSY+uDvGb?*1dE+z{up)}vi${rc`~CVk)eI6-6UJ?Q)lqj6=k5Nn$D)kQGX9; zUV2TIZ9;{MGsFQ~Vf59yJes9m!I|rHGO13s{){MO69vth=L@)^7GRfepZA@}p#hSYmr@9HTsMFvnI40>8Kk1deRPSj4G${F{QflYjn*!u%#a*ajCs&C*y6qXjN?& z|4neWg7;84lFV6GewbyKU!EVdQFRoQcgzdyX-R?W=fyZ~zXdT@W_B(}y#0|RHb1A8 zBR#C9vD}w#E04@WgwaZcT%0hKGr3CZDrOOi(t+;q>w_xBj{wE#e-xYRq)z|1Pvw;Y z*BJU9lV6WU;$=C)_!4gK-m)o`|DR0d^VW08WG;SN!;gURv|~{;$SN5qNg#^sdrJ^( zYw#&_Xc2fS&>HI?dXbM9gy3pkjVp$68RZA(WPE3ukNtGf_W4zMo4+DVA!^9bbOJ^l z4>oyrmwyXM>H-?0=7ggDkhuV(jX-GyXH?vh$d5!@KqftM73jU4^_HcNU`w*cIl}piqnHad>=4B2f_~>! zinWq2yzFlatRRby)HWbsJff|L66*C}LmwT~_qz`_|2a+EnE{qUQ(qlSLHg0?O^%3;VuY+Y73_Ci1_n&mjgqQ4 zYH3MoJo2a45E7dLOg_tY$zw)_|5AjKNt2j}kO#SB++?Fh4jefKr7S6TPnNOe$l@;^d?QprR%Zo|kR{6oI6$M1mT( zk1Is6aypBN(^1UpWzxi)=`igDWyw_; zpt;XEny5_K{cmC!yU0qS!|y5|o|<=#h%hz7HVW_~83hjmr5Hi{JMJ8iKOx7?j>L1I zoz3<;9!R?682KUO8RA3)Xfw{gC84hGTGMjl+ubgS0JR;x(Lv+h0tc&5D;i##HQ(y1 z>t+<`*CN^ldWR%QXAwM`0a}bNBIpfVMB@1c#En=i%YB|9Rq}JZsZ7)RWKBhe0G*{x zv$|M%$Qm~h((Joj2^g!uW!u|RNvh)$X!D4^4k*S{nNjl{7FcNhRT8RSC!arx%O%9R zTkEK(8g}s*Ni-UzBq`HgLN9Aj@hbWwCFrp%uQ+h9r^Am;6ekS9xArU zHc9qg2Gyq2h|-AE@*L@+n$L#b(;DYS&x3LY4D61~h=_$QCBv`C!Bs+&n>Yt8FI=Y6 zN2?`FJqhaOU_>i-mo4@y1^%&@WQk70*_aGT5hOktJFF`f1y8O15m8$(G<@dtD+ipf zXSYd!@1=SK?YII@DQrrcRtVoi4zBN}Z|pFGL=)OL6X0ciYnKR-Ghak>6Gx-Bue$*3 zEwX{wVJ$J@IK!YTpt&P^q_3jIF6CZtu2I))j7GCdzB@9IvZpgnEHA3Qox#77_^_W& z;$c{;>drl9kvo0(6*vOB85VABAVR&KYF02_t)ik)brU#vUAp-V@&@3~#u9_~D^fFK z*l$W)%x7LVwtiWsrSr94D-mr1htFF?Xgf1L6rctRav6R9?9ST!_EYDZH4CJ`XmF6f zTe|y`xI+IK-dqVAh|pvZv1~?Q{)?k|Q87mG*pkSi9WPvFid6O9(rM1hy5u;w6XNalUi%T zl1IYtLemlh1!P=}7uvegB7kQdoS;nKS+6Dz#1v1Eh5&(!>4&qlK|Lxe(08LzQ^eqx z-0jBJeR{;@e-yRj&bal|XdZp;hf|G?S{LpPqti<4Z*^H(n0O+^#chMYTp@!w(Z$y=O;8sH;Rim;Jwki`5(s?1Jk@=+)K`(NoRXD6xV`x#&8V4P%+ zTrJuot3sLgRRa!UUzHdn0@?gk*mYEdg&qzoQ!Y3u&evRop4tS!gY3}5YSd0yXFELc z5RZoAn_Mq2x2 zR4}b!nOKxl4F|TY>yaQRdF^P~`+u%jvnx3{jEc6gSkPJ`l=Vwg!U++2M63B9MR^J- zMIqQZr5aL8hCRzL_f9S<{OyX}w%q6mI=ayARlJ*d`L~U3xUtq8)(SMjOI(r9%w0Fh ztN>ytP<8~>XY)wk6i|Yf;6RwcvukI5k+1F;uG;S@I1*IKdP!yFS)$n`y)cFX|KVwU zld$Is=6*Vhu#GK#$c0?b-!PdEwrO6Ry{ zmVxU@ovpxbd<_ibnSEbN+CqPn!LNJ-My3|UrxnystE}DP?6V=Xh)LVNvD<{#f zVNUv!rSepe_A|y1!~H@Jc!*d(dBnxz;+k$af^vzB17&pq^k^ac_IhdS#eqp6U#|Bg zKRFM27I+H1X{d^tSPgxdauEnCH7usHR*p{8eg=AeLWqd(5EwY=ao^GYtPnnvSBdPR z5o9pb`SQzt8+fZhjcvh=#$Fe1fbR)g&K+dCB;nk z;c*4#pOZv|oz6qL`oL&3%HFUrA;}f!FkUXKThC*S~+A zH;yN#9Xnfm9KIjI?&cnLSp%Bt=&r8>_&Q-0NFniT1yW1n&9{kPw9I&@zE2Wk0BYiL z)US@Q>6@GT)7rC}z<8t1GTeTH5bTUkS3f$X4~a@;@0JXm3?%kwTlUsPMN>w1;TAgQ z9Xg}O*N!`^atzYg2}{z&a9N&s^)-XE`;C+_M8su_>paujPyP9cG|arD_<}dm9Dnjg zOxLA|zJJP}Uo1pzStY)HgWjh{<2-Lt(U~fdu!YN)aa}}?ATWOXvbZ4X6+9JQa4w)Q zZ-!epG4V2j-&e|Gcb#`1aREQR(({r~?k)uC$wZr6M5pL|V7GfNVgF9N^)U=wE9x4) zK@K%y073@^;=0c7hegk-Bt+E#@(_JkS`hbHVWHYnFsYDj!pTg{1DUs$In2&prt z)BP?vS%Q#sPYe3Bk`8ulzQ$Z1s8KxB4Id9flgU(z0HBN^oYW1kM7jI)7@89jLxTC% z^5Yt_*(2-){Lm6@5~!yuGMx={1J8-j?i==y-7~n57vg8}74FO~ z6f^K(zcIFfW&vFY}FP{@C78y)g`& z1ZPKP6%IRyo(9n>2m!xxC-fN(+Op+97S2B7k!10yf}?-e5QD|w{a0gXqNc?>n@|!k z>$Lif4(pgVtkn$Y1#KNG-GnR|I|%T*ZN-}jRBZOHcZPA-#LILJa8H#){i|2(wiA3Z z$OXSqN>DR+y>K)!EM*7YP=t7@oi(Wy1C8kEu~rft&SLf5Wc@RwHwvF|n;XD~&2RgH z0udXR%xGQD&hid=?Aa56;)TdvyS& z15oTX#qknPz_3{c1QR5u?X6@!I#S_I{Es5L)>5AwM?{#o#cZo+j*=?K9tjQ2xY4AE zF=+iR5ScUlY$=x@_aDXT!)L*OK3cZz;j>-?EE5sHlC%4;$PmtJtnXIgW$?U{!yNEUg!(9=J`KhV=dB^JbORlpr zJJgkH6lQC8>e#Se;OO*BI%+7XB|(wa!yJrAt5PzlfO)=s;VNbS?WmBV!= zikh?pMWmbn}7@s%;n>|1;5Wnq}#T z+aRP&<_J&Cx6-+pGTbUoQc;`VSnd-3kHXPijN)um_e|tc*uCV+iFo5gtCI!TJFcMk z_{PTAej#&d@Z24gH1la~~S^>kTEbsuR^pbIT~` zw5cc_>0jP8noh=3{YMdNCHL_WDE;q)rRAsLvN$;s22rtZlhFeU@DW`>J@w?AW%q5a z6|w%p)bhW@^tLq9LTi?Yp^o%?H{;!Mm(pDc0I^7wRjB;l^vE^QG5SefGO_&jjd1%o zMQh0>)>i-V@5UV}y0R3#y)!r zMV0qs+AID-77(^m90hw4k?$L3T)7UkTjbO^`VJXE#g=3v3vklx_E^BR87^aNRJ}b!to&>83mR8b)3+*Sy;A3O zdFfIbN~T7gF<|TI5IX4W~Rma7BnF%h8>8mm;zpM3~#;1OP)`x& z2PZFoKN+(G1hapZ{;{~k!}x;HB8VXX?q&#mmDMeu3|RaH+aE<_yNk5clrja{7e!f^ zhd%FSMXv)I?(-juMyZpZ3_q6U5%>)e>C7t=2{_iVev~A@LjiT9#>k)dOET_h2jbBj(WYtlChVB+f-5GsA1F4LBNqs&#L@em`hk}8g-$P>sp)}L z64FZF`W`8wug$+y{-dLlQv%YF!_SpOLigq9;CuM=TQ%^!XPNOp|8*Jh*X$)EbM`xF z{3?1F@>eK4>`5{C?eg_n|B)#q-_-#_WNB{qwU2qd`&3ac<3-LH^rddyjqk*oRee-C z%a11R=?zmUB195P`q@%}`XBp$kZo?r6&M~)?CjUA@azjc74GLvvjH&4aFuN`vQYOg zkl=7Ff1$~*39*S9CZ&DDix3n38zws0)gl+WZ#L zNcz)6j{IL{gs4cP)%j1K~Dw9};hHeppArOf@N&1Cr|4{&PjuTqbnECkNCnd?t zWZ!OJx5+=*RVHo%zp$UyH#9n!FZ+IShg~J$yug0{4lic^%T`3|0Y4x+CGdJV_^>Lw z&5#db_|N>4lqun9=o&Pq_vT`PTZy;c6evRZLzo2op&*h=bLYBX+I&vv8|onIuWA-Z z4yv7%UR#kA*t3s1+r*XdhYp2{l&l@{5HH8fXz{3d=DRe-eQ|l|xjEH$Mx~^9PfE74{*TJtC&Rwl_6(9eG|O`}-r2G`tnTExTL%7mg4ongWN; zZ0X)h(Ube`Rb|U!$~sC~sxj$1q+zhFn~LPFFGKyP$5mzg%YqA75;57qg>P5EJBV+) zuryvZZGrlW=xNE`;l}?gfeO5JY&)l|&PGy@G2xC8h@K!pajBq(xZEP<`Yv|PrtOkB zscb<^RZRR%OD~;9GrzOqNp`9w9ck+Kgnb?T?3XS0?Ga_~i?#!y6bOpV$8~u@p>#d3 zW{#KSx~+EAdmJ|z9FI6}^-LqSAx^`?p1+1V+UQp*O50UMKPA)W#foGJ8wVc1aqPf^1AHss;&RZ zj-cYoPHt||f{|g^S`qZ}RSkCvYgSIdi(c0EkZ+J*-xO%;A0>S}&F+7|+t;HBV8UU2 z|GN-rg-|<~1aWjp-j*)caHsAle7*8h^OVb<-b_U1f<6V?wzh7?N`O1 zAqM=08&5iP11>`h*II^a}dlO$S;l~UVb>Df=am~uVl>NIgu$CLamJ)7Kw9~op`Kcm+4NfT& zCfrhOL4+!&t3M+*E!`l;39!F3>HkrfE99#lM$4mDgMgryA=t0AOQ4I7*iUeyJ7=ac z?IG@~-LWR#y6dV9bHT|4%Ypxw#xC^XwIIIH=#nZ2(*Fp~|K@NPb{r063n#ZgH|mg= z1Dz+7Hqmp{)}!ufvYgpLBw#Ih64*z1RXgE_lqZmj6SHKKFMgcPW>oAR6C8EAu<|}g zPh6$+67&YWKNCdZ=zPc!hzqVPvNALYtAVG=Y{Y9KT%T<5tC!8y10aSfY>l0#^(-LG zK-5FFA+QiOAk;JrTb^8*TqnO_-(Uk2M1H1v_TQ7nXVwaPOhZR@;h5%{h-%lJxj$W# z9s_MDl9D#c=*=R6MqXv6Gzqhiv|O-BSc9JHqsc75zc&F4-HL{0v+*wAo3I`yG|6N; z6S*PMm&xX@xE52`Az^^~i!;tbh~sV7emviwznaJ3FPs=yljz!A@XT^9iL%>vaF#yj zb?C9*xZ1k+WgQub2fpUz04@8%FO~M4tk&;)AjyX=KP^U}W#|}u&D3&b^lAnYxEh-%CM1xXlGBTjqCrH9+V*VxyRPeJ(men zqOS#kCqqa6xT}Nfu9lz3iyY{PKG&tjb1RrJ(1}nC{W;Ir)6Ujsg$? zAx~(pI+0K{-1!p#1WYL!432RrLr>V|P(D!3KK!dSa&|t58*cJ32Qz~H+?qXFk=lId zQlV(+mrW25vJqhix>AENbnOJqEbsOAo2z{p zH`e-G&D z^xZnP_Gh9MVuX&&h`M61v4^QJjV8)#V#BA=4A{#OML-zv4A`FR*1K6 zL??q}`S_paP_HOAinD)?StcOe003v8bIz$Vf+>wVv8w3sHd*{ zM~%1G^K28lad+FI5#2+3kRH)ft1;+C-143EMh3*pE$uPHSVyA?zX2YcIT_-|79x za$#weddE(S)jP>>Km4U6nzvnQW#sXe&yC;}-)xQh7F_ES;0c#@K}@M=kwXJc+nFu(K2U`-DNkE%ny~;6!37IW`zH zWwakIAjbSAL*HAHy|_V3PmssDpksgMckQjCg0;0zkblo9K(>Gr+i_@BQK`$4oFt%V z^m-dFU);%{o+f5o=k`!Y3LY_#{V@*%1x`ivkEiqWYSvIcnF^ zYJUzGfAlXC&Q5Ufkbo8s&zlGVM)jYNePeX`ajAhAjm#mK-_R7*Aq^8V!TN_Bc)pMS zvmEkBq;?xsc?`?*AkMYI{N7O&bF@mM>VHwU|0q3*_S`Dv-%5p-h%?F$OYdI*HlF^y z8~}XsZmEA2b}Cu>nEFA4X3oZSW)Ay*Pj>KDc=~!R=~KPJ(FDU&Q!2r3dOiMFZ_1g9 z8-UGyc;BW73lc$vi-=EST3frnOPz(>X&?xs@q9~+sW?l07T@aaDMGW*S72XGbJb_J z&6Os~8&#LcN1o0?Ggv$L-=}TX@*=p`I?4FP>Jh==7!)yi!1kR^n?Szk(KTI}8?T+t zOpkZNV3+quYYXyuozZ0|{4S8RJtX|4bCLv`4JrF75e4C#ZulIK?5$u(dEATh!0s&n z>tZ-X=ty!M_gL&noXf(;cRIe)+16=!pK9v3&+_F^e9V*7*edELF(pZ_4*oulHr*Us zO%?Bk2bnrVhArqW;Wlg`8Thxrl~CgFTH>AiA?rC7_!ZpN$Kkrv@y(@zSO!Z5sfLn~ zAwb<#N2_?1Xx7UlC!?9M(`iFaOY7ul?=A63b4}Gn+01XiYR1Ytc+ifH+nrPP;bm=eBFncyjw*eP6IVJpEd>lpm9THkvv*|L~s9n zQc%!votOiyX<9ocZ#x{#(Xq&9erB%uN8AK2c@fP~cxRuxB}yLEQ_kN%v4zj&J-%^b zhDRP|BR5W?M^^Z$AzlY^VO^+JoicCZ_N2z|ZnkajL33JPejDmO2bxK82mX-H%7g6_ zBC44UK*#jIzAHV}YGrNmsOH3`O8y88(W+n7*S!AG+AcHB=pS!AK?ZcE=MMvSK2($u zvS+f(UNg`yuQ)L>k9rJbqYy?lB!3(@(WUbY@)oz) z3yI%+KP~UM$}iyJg3m7{eXsna48iqtXY#K;L-;LJ^VFgk|3!292p5~I@qS5L^UXyGEn*Bi%vs*>Ju^CC;%Hb5vN)S-f(Kh* zP9o>BqA8@=!Ob#)0eTTgUt?ovLiwPM4*dzJ=gn`GDlT{q1pnoMHf!>K6ee$*v6JSM zkIRCMf*ij7{BVzj>Z8TAh={QNC_*2&>8!Ovll8AcllDl>WxV;rsbmf0U=}A^oifl= zpuu79gHu4D1o-W{^!ww}{MO$$QU^E=M!L4WD8;hUT~8)l&6hV77o@(6RTL2D4_^i` z)yA}ah`HgFo2GX%_2Pvd>>eYV!gbSVCC4oqXLFr^-d+KF1o^|txan&cPiKUATh5>I z;$5rWtKU0EQH*0}?@y^=jj6XnwC zk#z7r3ryI(kzj?|e(J*frpv9jU=_2a8yPo9OoXKB&&$AvYmYMF@2dBnWWAYkkj6NV zkDHoq@C+!`yNHDcxt51d2t(D*Wd+JJT%LaICo2o6ovn%wD)dQITfN$K&5LJx{c$z? zxsO}nc9_gmCQamwRd;(jjwm<-GBOkXhg$A7MJRK%+u_V$r7w&Zx^byt+S=I)q2ETm zx4riiQ)!Lj@bz++DemAEB;Jm7Ju+$R>*2RJ zH!_S?${8R7`oe3da2D%sN`R~kmu7^9yml=WJR4cT3Fp;s%{kz%=69Nl8T``seqRca z-kONT%dx@|gqr!nSLKxDvpqy4QCpA0kWX!UoFpNV`3e`blqdGgcioaIJFXTeLnL{q20ulF7IED3 zSoI0%rjrzs)VE*Fx^OoLn@ma22%Q}sU z>@R)u*4Em>h#B95{F|c!J}N8)z?j&-!+|E7!zjes1Lj$?d{4p|5zg+PhxUhVWW;SR ziLd=Vd$zwL#6j-WN$R3r{xD!)%N{D;!N~)pIBS+yCu|&{jb%%du&FCyPs|vycV4^t z(BMKl>O-7c|9TDpUAT6vN(99pZJ@xJrt^2QeG z$_H7y-6EaOUA}NhHQkLRly@r5eJf*Qwqk#8$gifXKTATU=(jzGEcSD!wqBr)6k5fN zCJZLW0Vbcf-mDLi?*96!ZtUiJN#)YJ(qFA&?|-=4C}?=(_w|5~P3#Pkx23>~U7O7q zU%P^2oYc&X`!OK<-C>E~&N+u`_yc+@QAaX9B6=2TaVWrcXWsRbzLrf8Zl z4>wL?h?7!_%MY8uu2aP!Rx~6tm~@)@?su~*u@^!b1ls8*4F@IJUrioCaf1(r>^5*!zwDeO9WvdE06mKUApMGuNcIEjfIN`e_k(HY>{&)Aa-&q8u^NoOOB!NVJ3kv?6 z$Y4wqlA2H6G5@;qnB_du#hs>UA&5oj)+yE)YcI=dzES)uK$TXyVPr!xWSLqEQByeN zSW$5OrkW+|=*+r+fPHC6>{!6RBJL6~($@ZWHS$uC@K53CFZr(Dt$n;*qHdzII=%kj zy+DbC(ca0he7S-EWmWKlV|HO;rc}LuF_tWR__YHDX+D}%NYL-RBK)u)ama~qZ*K{> zwX-<4H*G{TWM$1OK-E-_fqftp|eKzPc(x_pWdBwdN?&Rdd$DDi@pVVo_o#I zg`(IheOQuz;6$jodFkzEF3SNreZBGePZw%wWo5!a3$+v`6)rDA8Fwf9WHVehu)HshSWkgx*sK0@`mKCKI%M>6u zpA5>MNvq^xSr{iPUnE2R3?%NnVCXvh8^&)C%-a&<{{wa7;O438jf*#KhMA+AK(OU= z10`a?k0k@M@2r^1FuNxU%xypV=39GQ&N2p9y;2rE&zHCB*>72LUo6&S=HsZc(}U&i z*rDy;L?QQI6+@TL%7v#l)wBDr_kOE6QuX~{|0}8FDD_5?#dY1KM&bAke=mssH&^A? zA3y4;mySHYT`eX$dTl;r>(XoT1gW?FJ*@d~+1d1T$Dn?WZFL{b9TBw5oK&!MdJoWq!aaT7;M z4GLjB)rwN*GKv(Q?S%z7U+>xG>Mi&AoGJD#jwf~H!m2NBBsvRF-X$AtM~f^#1|n#H z{4!~m0MFk*?8aTE+AwI7boH{llgRX39BDdTb1p>P19>7ps}R>(r=T#nPSw=tMzc+)H1nfnx8VHuV92J_`-C zquX{@DGU?8gp6N!zq0vxhu#t78MI=5&#A6Xo?}LYc6+>$#X?iD)?y}_R!43YfqEZJZ;OqTl$xVh%vSI#=5y0os|T*zs=OPVcoAc z*Jfa67to4{*8oSazL z3o{C^8Ef|{>!(PYN){HEkuZ)k%<%`ZE!OqfTuJ#}=!ng`;+=hkn(yMQ=qkd!P)9KZ zjn==LBmUDb>)h*~EfSc64+7m6RD>BP%4Pa$8$1MIa1CoJm`A+sJ1j~=3X9Det*kIC zg!Gm)@jbs@RCkZDisG7zS<-D%(Ux^vV^I{=^8LGMEpLQjxsMwjg!-^60U4UP)WKyR zn7>!lS~s%fr>k_nKja&$cggjlqRdrc%FTxPBk}@_C^D?yi2Z!b>k%4DU zcBThm{jHF3@?k$l-?V8nZ{W>S=GYV-4yp1wnZyEVv*eKI*AHc2A;$4+U)3z#!N zqnI4Fshaez9d6HqV&**jxs&Qf^$bs|fD~!i77{xqwPZUqxRQK96*W2=;wJiU&z|n@ z{`Fv9FAvXn1?x1-U|of8{pOC(w~ht|Gb+c8#VM1b+^AF`)59IGTv!7zdSy%An&$ZH zKJZ0&WGB4Nm=w&N>6#x?$keB&c4&C@D*JSs^mR*vK4q@$5bP`nMfCy*R0X@pdCl>M z3-9*eLBG@W5Vhv_>;4d?7IdK$V)mVG$B;YG=I@Ssb80Vcr~VTw#_=trRiZh&GDW7} zCy1@b5wySKR#;qF8o0ft;lBTV;zz{|grO_9qwdX$o&@rJujfq^H|Vc9kbn6a_x$ST z;_=eabYhS!oGO#yjq^1SpU}N`3E-yBe3J^Q%ezAdlRbc(NXmw@NV_xLzeRgQYMNU} zAus0ksjoQWMSn_uKup&RHjn3t`P z)-!?|q5l;Z(E1KTbW36E9P1?`PQ@ecq3$%MJd-3BowQ=?lO`=oY9r(13}%NY%MwB@DQijaTgSkf zQ=0D->qkx1YsbO{Z-OI4f8Q6(%>0DiTHN`ws3bDs{G@r3T2Rxg3G|29BJuzx!S)F7 z)9H*sk2+~lwSlw=hoOaYtd_OsjtAu>SZt1kLLSXp_ryAo%aUa({O^*Q$JCU=YMOgE z&e3=y?Eri~=sqrd)xy$jaaP0CLgR^1d9$)o`KRa6dR!**e`$cPiqYVntyudyojbAn zkLn$XtH8q5o8f|p=itx2XMQZ_R43N`vsgsH=&BUd1_v(j@T8ghc}o6Ab0`t#B7L@6 zvdCKEroZ3$Cp|mi_giU-;L=c|uia`}q;lugco|ZZwM2fv9y>wA;dV++RUl$Oc0@7?YqRcsuU+~%X z@RTI=Gahd}?{6FUba@|^c4fR1u>Q>4I`ygWkxNO*U7Bm@PI2HCY$|%ed!>JuOjGC@ z-wCw*^c|4__PQN$G1DnfX7^`3zL7?f6aTj`^!G*BjIEShZ(6y$wC@3~2DKeP#hTz2 zj7PbSZWdLP^uG0end)->eryRCCTd-+8b1BIZI{+}|BKAy^7$H%9|~RPtO3`EQuuCa_wQdbD+9S+5v=3K4C-e77U-o|#S9cb> zx!4)ZD@z$(b{1~GK=KNC7vg*Evbyi8Rwu-9^rn$l53-8KJl}-po7qbmv(RBCd30pf z$=0gl1kr&+kCJpQ3mYV43QW&?{kiQY!xhlR-`^V@tnYFDcBV?lwoUv+n%c#(F2%dy zF^N$ER6|eh_C1MapSj2^XZ(k$?cszD)%U-D@aMwOnOhw6`9s{VC##GmBja&En6E5B z&YM&+yWaZn4s_B9Qbv?mSu^AU?VXw}%eEM{DKh&R91K?-2ZTCEOP^PG)tKPeYHUt= zm*^`LU4t#)N{3tzy>U=NRFa3 z9LyG#u0`;3(-}~6F#uDZ1_Sreu1U_w-un$R+{T;Gq*ZmL+^!M?Lfa6CYW+!^UWPEb zoW~!MgF#f@*y()s83mD-??$@jjZ-qdl=?JNcX!s#wUBFm88?O>mJT}bl=WY}PX(;9 zc8OY+Or*Zi1wvZTt<9vLrn{8C^7KsWp*<^l`Wi){-{mYpwQRX|oR!oHU=89hY=dhZ z@_MI}Fw+D{x3-xr=(F#zeN7NReE(6+Qt!1QcOGysJjd~8Ue5#;AobopP^n2S&1LV~ z3KUuPng2~{-EW@CKgg+JC=}de9(7`#><)Mad$52XrfPat5IenFb|vBhM{? zJ`-wDB>hlJGpN0Cv96vu~|FEnZ9Gx)o3U!^@eqO;Wxz^=*K6tl)(sA(~i~Ue$?!IcauTUzltoGU#I@q z_0WC`EteC;wx?|fYMtdAqyfzhf#Gel5^GplNW$r^Z~Y-vCr zIvX?2lUI7)IBxLbPz8H>w9nzdZprrV$r=uRKw6VlVu`KRqxFG#o3y~jiZLYP9tcvW z7WQm8^6O9%GDbmE;pI!0mCQ~@d%U>v?P7^=zNa-7#U+M11Q^PGZEYL3G9o`OHq!cy z0k-0OxppB}=R+w_z*XH{qz0NvCn5iSQy4rHTv5@v`Rr-^Dh!=nED#}+m)o-`7h}J1 z)O7JW=kC96atj9D2yDB!{K@2e443(BXA_Q69NgTb-nVB;-1_ZbT|KEQ%SI0q(M?h7 zZ>wQ_L|U8;q=XBDrO5@z|NK&3`ytW11k^+3s8b_$ zcHA~lKQ<%^USvV#(cG%8u=sZ68yL19$GsE97@B@PnBG(LF-{^Yb+^oRw=l@^FzLv! zul5AA=T~*6Q>eD0(DJVlwOT8~3Vd?%%4=Ik`LK0`EF@uufx}pj`a*d=)2g0+zR)lT5~x#+T#{?4ywMlz-d2px5IYupSGed56)_>~2TlTxT;S z0x$%LR#jMMyj@FY!|veEZd}2wGD>Nw?r>Pm3|4i2m2Vl{Dke5DkgY2Ns~`Vp?@@SR zvi8eER?$i(b8BNfGp0)JfZacDHbg4!`WHqyg{n^_#%ag}W(Ee}?Jt zh{L7-S``$mm501D+0QPXnm1yN^Z|@7)b!2T@ep?U#WMbBE4k~)91c8~TR-8WdY z@8)DdRygRGYbjt|dot8XYUgOnya|VCx}Fy>Y!-%>$t7Mc)lCXYyX1iVU71)*bijH80jEeqzbtQ8AX1 zp^>&AzuU4#>hBEni3c)L;z<~bVjLtiiCd;(+Dl$NDkAzEu72rgu6IiiE`5FeR{C{Q zusOpAhti=1nC+rgMifugrD5S4@J!pzAWjH+m@_BqpI5AS!!oIa1&rn51NY-Q1#bK4@<18{K=D zB^#?U+>D4ZyO>-1an@&SxF?GA6WGZUM7qj0{Q9DqjeZTNZP{`TL%D&r9@4}KQnn}- zf!}*~kkM3!1AF;AvW0Qr2Hi`eqy^+8;=1Y0T@`t@C_&EeqWdY8;wHYJr_O%EK?H#; zB1ow&hXm$VU0y?WlDY=8FXwKJ$B{+J(uzcZR0x0E?BkGo0W|m(%*;H$_6L{~0sSNG z`F(d@B?z~I9knY>d{Is2&a=v`LNc%R#z>#(enr@{xXbR1Faw$CY&}VJr7#9Rjdrq~ z9V{Sib zYkYzqelnDDW)qP!vAa_AN}+qe9S`jtGKMXtRxd{DJwDQj*3w6+qALr^{W%=|(ZJ$2 zMSaE)Jj=Rd<4DZ@)$}0N$ik<7;XH$1pL(ZxoTzoNjm$Vv(xH%D>F;^vy$9SvT8MO9 zcrb$UV(i*ttYs6Ktb63y1y#!Qg&IrQ#Uz2C2$=cnh$K~rc%U-qFk{vw5+cy)K){`LQl6|bkt|o+U)Pmede2tWJY&cKNMhj*Ty*T zH1QAm=wkY0J{XFErSxQ(c>0={sEIoxPt_nN*RS4z-y0yjU}^@Pn}@pl_v1vM@fM-B#Y`gz!zwl3>O#f22pW4*@az${R*9_N0}e)DYZfW*14 zKng|$!;a=x3_JJwx;Q@$hYU#HsH1eCp5@G4s;AcfU$r-@gw^9sV>*nFq$HW2tEzL5 zuOkUE_eN#!5+k{)ae7$Ew*or}#Ma&R_c@cMrDV^WdfIm)T`JXk%{Y%D9M(Yj0RC2< zlftC`;r#6WdU;B|#lp-d+-F)@-es@T!7(w$+T6k5;9h!UwpS0?MN#U-iv{!Sr@3+R zW*K5B^n-<%u~dR!tspCqzIiec`8J)qVKLN0!45XZ3l97tP1z)xgf(vRyV9U+N(|D& zmD3x)R*NML_loY;QGBi%aCH(pIGR9ebLv;HaUMom*%C8Z<8_v}v1)hD{@k=ehwr3) zZ>8mb^L7_I9ohNAPX{6+1|4OJj%1h3%rKdDORorZv1WdvuC1TX2UvU1EA{A7k4FWt z(jXh;lG5fkAS7)_SeaA{x)AP}RgsaUs+59OBFcNfW}X>1sn2Xf$=zXOIq80up%yln zPjPizL*>R79zfQM4db|>&z+U`Xfh;^Ni{vB=kyUh36;co;fSOAxJrwOr2g)zooms3 z*f)-r^z>nWkKmzZ{FsDrSWEpxY6^iorqfm$*g?Y7+0}V#Tihh5s9UxEK14%nIAPiw z6NaB;o%?0TCOa(1&EAJ=KrQ?@pl@T#?4=h^CnA}}%F2&2veeSfJ2kEU40Q@3l|3%> z6HFMidTT-y*Li+KM6KnLLYC?o!%_eKg({F}-c7zLUJVrPXp12}>vnB$?#9)9y1%|n z>OndWeQQ=*yhpr1AH|q&kL))5^?`Oem;w8MSrIp|`+q8vx_lZ16=D~n*zlXEF8q_C zqE77-=M&P-MW_fh4#kcx28kKtVv$8XZkjS8C6iRpWrm`&3Smdt;$gclU0=nx5q@nV zSbTeVgx=j7ams}|x?;el1U}o*dq>|xzsJoeXii<}6-)q2L9w|@B~&=zC-QNN&xzMn zR*c#HZ5mLh}{hN;O*?6I+Gbam`rdpGDN|c`QFwVFO0KH}(3mEn{&m~^S00Zpl z7y}4GhhgR-!?OGa4Hj`jyQZ{ZZfBgFh$jUpbzWd0`NM?TT73^v@Lu}c=!93WXIQTO0 znx%_>FWuXK>TPM&!nNu+n6*#erTLo5yWm((tBQKrGqF>Im&E-UyP@4cL&H&z2&ei{ z-F5H*!uyNQ%inPxJ9oSQ;_5tQ5qW5TC;ic#+FG1{FC>L;8Jl;{@UF<&7gQA~Bn5sg zO3_d`JE^H)S2x*f?+54Qaerxx|6Mqu~fz1?zve|A;|6F18Q+t^`FA;@P3^1=pA?IiddyQYh0W>KS@!ROY^4)}!!pEh zs6>?VEcuULc_HWZrr$MqEy*s0VV%wU1viLS`@#My@#bzyK*tA~nBMs;VNZOSST(ts zLZ3TY&h8I?_oqUIAm`G%kdraw*SxBeS>J5|A=CWF9ee`6q~Dx@2K#6ow2I0q0Wt6@ zd<1?uc6v1XjvqoBXflFmNNDm>QGe?)_GYw+c?nxHD9}-Rmg8`wWNxY>JlHy>Yf*5P z6LqCXoxT9AvORx$-hKyuV{Q~|uo<|f!z{BIlElQKrU7@DfcALt0LL|#iwM<@JWvMq zmH;(C%GVKCQ}d(O9*47}+u+DmD?rQ>;u8sA{miIZ?KU_GTzLL3tDgQdEPQ$pi7OZYOk1Id?N63hC z3|U(>j1g1vZ1`u647|ZO|Bqe|ruq|oSM24~{G9nAIIqcY#gm31tnO=d9UI=tN$@k5;cg0;1S7*#N%c3Mhnfrxys$RObBe zQIWYQt=%hpkJqQT7fwqS;b>%QlgW1hKVgP&ta|GrV7b~M5(b09Ft`+Y#gjqZf{J) z>e!icSR`gU&GS9-pbJeL`*iF0^L~UxL<)xipToTSw$7~nwxVGS)Qo)KT^a%A-H`}{ z)?srLkHHP(ll-68YBT~75hDHO5D0?wn6FMB?svdFRNZ&<9e)lBaO~o~TjBzeagLqy9JK7amm{El&tG6B|a$&Y>SZ z?P6TCR(cou<6_nW%PEcekkk*Z`NL|4TTfnSuPx{Kop6)QB(zXoCT^)2ze8xsJL&;= zY3cXxf2F39MJ@*QJr|H|u^A~xeNIA$>kg&dG0KAdXcjoGu2HJ-#Hf5rqF=nirF-j< zZv>S1&nI~qK5+Rs`f^^`Ej=i#>sr5+N8N)(YxWp3DhVYXOz-0hCCK_74LKK#S;ce!4UA7klB z7J>Z-y4cg0z8EUk3ZQG?V=wBpZl{-Qn$3CeMRq?CyQ%6&H+g&eUkvm|=7#rg$Q*XO zH9nS=^ZTUA@4KsBTU+m+PLqa9JLm^%*r1Qu%pNvk91>i!z3bz`jvXn{qO_Tm#glyD zUjI!WQ-b5w^xIfL$1u-&t!!*4edrZprP{JNO6N|lLfcnmwcnafiWEeQKjDYVVfc`K zP<|RJoXUk9#pAJ%0ZY_BOJvS!aKKctLeGa%w`61xD~f9~-)pr;x#H}gqX+`dHv1PM zfOyYy?r5Wx;7Hk{8L5U$4)9{vj^m!X|BllwNn-3R$7&%+@36rk0xE&T4Gj z4S0fdIHQhREPk6$qAm=2D`Jiw`}}r88>_E>ExDDufdjc=#u~VkvXPK3i}2EIQW|Kp zhj?82qJykYuFBDg(r@eVV8tKH))}p>O~huR_0m21{P~eGi~JT)!zUQ#rBog~(A~YJ zRF<`Qmefixo5qM};svgy_6y&jep$8E**$WopG_(pVUMWtE$7A3y7@gvMHsMW8n8+9 z`9yJIh|%gSSA&TA&|G19;GXZU&Mk0rS(FGFCq&FhPXte!wk7`b6%-jD8Y{*UIn~3D zTHcto4WUK>R3Ro95&9KUdQk-F14KBhWof+6WffvTOttS=*f2TG>Ad{6b>YCrvxI`W zR?8VUJF*6vI42L{t_I5-+4!%A!6n766Dn+7vyuvVuSBVr##EEO$ zb!s)NH()OQP`{_FdEr=tW0Z%A@?l)5Z)B^_%VOtDz+HL?>G>1XX21~tKoJm4Tg%X> zy;l!gpnUymx6Ju|oS7(m@w7+IH!>1?N+h5y9)l(`dDtlCtlybK4KXLUAI?>zBT<<6 zvlGo@oLKI;En(<`xHfdMi2u>xtF4I4!|(t@nj<3jbcl7yx!X73gjWeQt6xOZ#Fag^ z9eq!?4zDkbm-am+pWUblV-n049nPAl=af;62{ zuzveqH}L{X3Z)K#3+gyL0++I+zU;>V#)5@3H_}t$```Rx=@V$%3#fwM_Lhx4Ii;)p zXK~9OF}(fOwOPtNIDc4ht%Us-n*mf@e~SnIrTzQ`R{wjG3pT$i0)>UuE6vdR-=Qa} z7QzpguT5F#Fy013Jo{1; zOCc|90m8d$r4u{HQ{1X_w&{pBy5f?!uGyVnASD19wpAk24nPj);}l6_cgsmP?NucP z{M{iyi2=ieu0Xi{YrSVA54!_(COOhj0{FNL7ly&`e9S4cxMD4JXgk<`b-D>Z4+bJ( z;-ie=$b^C^a&D^EElW||M}i6lflFEyyNNF%3Lf^U&GtJ#tJB$Id-%i`a?^pJfs0;w z35z{rDak?*^>bD!pynwe%YCu!r#_85u7#DZvp$|v`U=Alj&LqJG8* ztP8&$pJ`ops3_2U_BIWaXvSF32kkQYhn}@7g5W|z8F=sQ$K4Rf4f{s9VbvuAEFu3# zc-I)!)$i46!f+inUJU=du~HXU+UhMB;dYj=vm;B@%wy_9dl0?o%skO zmqrDgF+@98MOI=a5AGd=)Lrg`z^260lPDAG*g62MA7F?Ql#z%1XIb-2gfe6`|F6{z z5+H^6M~wc@Z1aTFG-Y`ZGak6QacQfPb9c;0=K^NzIi>t%>KMLga7XCTva(P9wfE6ENfc`Ww=TuS*kfb88DL|ts~(>X8_sINJqx{CB% z5SWa&R?lzPMEoR@LaD~*pl6W+ay7p=@uAe|B}Yjugno#vqyi}jwa4Oq?n-Rmw{@$o zqyCJTBewmQS?vj3Cw6)d=*p*=duWQ@85nU2 zQC3-&QO0^P;HS3cYO-O>w!nbAILtxn(^~UB+r_rHDThHXOX^R|>+#WJ)(sgXCO)|0tMg9Wf>1;p1Rpo7lM+s7{q( z&M>;2PBFeEh&1xLvF~y@F8%s%Pw&eoIF{sV!7Pv+HrBQjkRFwhGEIxUtFs3*Qx_jd zYN{yKTovz0W-1Af4du&Jo(Na`jR9ff_fkw3Jcx1vN(IkH*zlLh~-#%>jdlCQ(2@xK>hVp zLh!7$rR?Q5Z?{~IkwYkm_6=JIw+k-FhcxS{V9p?L2MY&>E^D~w!~qB-l2%%2d|<}4aFd2e>~D?aIreN+D-KS>g=o!I2&bq67kzQD-JUv zC&!uMoD*vjs*0`-JotuFZ!pm^rQK#`C>a~LIjyOO+P-mQ^VppOceM_qd3H2vQ?-p1X&HTA6c#nTEW&7Cnb%~ zzPD`yIrpmc)?$8y){+DOa7rQ+dTOhm8`R7FZa`YY1B9NTIYyB^Qz9IVcR7t*YTYY* zO=Nu!{6@UQdo1z+SFPm^OKg+kJugn5OVX=tPfAK~%nyC@+N90q-r|HzT74iMl~(KP z?VjFx7#Xi%LV1qq7QDIuur_u`Zmo9@ckLxGeD!m!h2{mXf}K9Qob=ct-we zpsVj+@`2BO&j&{WierJ`yJvjQ?1S?|ee#O}FJe(MM3xXDEdILtkGXm|)kzAHCY)dM zQcs=2^N>9^<;9G2v1jNImcO!iI$FMj-~w_jKi2eLfC2=jsQx))G(fM}sT%n|$1|Jg zBv($99lw&>3{C^{0a{0Xmr!%$jK zW1P{5kWUkBlQ#%b%R>JjRc>@s(P?D@4AVC<+9j@i666$XB0O}D?Y=s{5V2J6@}FGe zzi5R0Z@}O0&v57k*%o%f{0p{YdSXhoW>#-7vQ`bbMCU zcG2cSw^wN4FF6|wZ1oj7HK`a86&ylwAGCHhML>2lH$YA~HxF%d&=SjJ&-yi}%H4|b zxXcs;5m^c1oT!`4AZ-j;%>B0Rr&)a5amAb0qdSxQE*fiUX`b|#%li;;?yN!r zKe;iT*01j%0%r%Ne^i=)JL8L`|}R8Sm~AU1|trtwR&~4wjpKui`ys)GTJT zMP>!^st?|a3Vg--)t|IxN_M$=WFTFBl~BdpvBomnByo;fJWG1je44C_Jn6U`ZOc_+#$u@*=NDKKa5WMkhzK#g}c73L&tp23}MTUv2lB< z=Fv5JC6n8%Bn_v|`Hfmx=8rPV1$z)?kAYJK3^5rfaIn_1$gv|(+sF?FbQNaCo1UhU zPTJa*pLZfRNK*F|?G;8}iE5~v9eCOO^d4BAehbfPZtM_(EDc;b5=mRXX~u7LaLWIyPJ_00;Zv z6u6uw`WyH$F#>xQI6Fli3cPVGTOcJq-6Bh;l3;@LD1ZGAs0mnW$58n5 zo+>`~dVs#1L-a+nnz`k-JCZwGb2Ar zi*6!p^@`zv>)+P3{{S`7ezV?C80mNg?hGG0(7#gydKQKXkH#{P%kpCTC@btw^KQA0 zyZQyriMsT(cvESkZj4pBDWOpyM`4$x?un9@kiChLl%|*v_&b1i7k$6l{z>4kr->c0 zk_J|b=u|=71ex3blma`kPv+h^xB3e(rEQeO$+m6=kE`_AQu<9HcI|0y?o{B(ghqig za)_y?l!@L}?M@@LCh;!%Uv4=OD7lQHlUAhRsrG20oqJQwk*~$8o9WM7xtmPv_MOf7 z6}6DM*g)*hw6>yL=%w^pS~r=Rnr^jW^|4;xJNgxW`{KTY!3RTs!xCWr2qE|-i|^JGLz^VlG*MwHX;jAqsYM_ z5>eFWE2x}788@}squOF&Spx9?puK4xUsx)ZdRWrMV^+C@Y&|((Nma0^urV{W=ZNQr zuf44a@#}bXQ6l&njn@XpR+qjHfN>?B-~j(*iq_{+@}T?6IpkE|YXS9q$Xy*pX|?&X z7s>WQ_*7{kau}3KuxmRQEg=_n47^jFVO?)95T57l7^V@t#`%nVfpv)De5>p1@>2)N zgtrPbcB-BE#_boO$YM2|KYh8cAvnXAUtHromcaE$JB3R_N9}n0O2T-N_0Vo@%B$<5;lzHCpg>mgyF2^a zjL1J(K>7c_8~@>AT$H+|8_x(g@S22}V!R=DS7`DHTLmCNdOT#$MlqWryCZh~#h&Lu zw?ADBcmL?Fr}1mLx9Ph;v9W}JB;Ekki7Ne%D*QM`5ykjGnJH=@;I41jN$>O79&NG4 z{Dd`E@9L|w%Dax7WswH~J!KRwd8z)dC8hu9AODlN_W$H$l!3b17qj?0@eL>Omyf+z z3B|R+{-^fSL1>A=u3L>=PC7ZU`mjJkS778=Z>Yo9mAMk}Z+453ug229twZT{)@6LY z|K&y@?L5LlJFk4k;1g^F)C`dyJ|Nj*hH!%@Ry8VVne~Fr7O$CM#Cw*>;|9kHF=M0q zYPa3SdGz2GY6-rShgZd&50L1{^p%jYo;+^Dzwox-BgQ|O8vYN?&h{~r!83qPV4p{Q zGHB-Mu8?63VROA!7tHEjJKd%^UB!O1>M`oJK9gBCH!P}13AXy<_>PiYt&%n39B^rr z>r}bmA~Az&C4ii_r#^YA({xj>E-rx>5G{{b$a?54&Ft`UYB+{xGi-x?#i`{zxvvYTYp i3qW`JIJ`8-c;AY#bWq^;g#Vf7Uj*PkuM70;%l`p#wJfIq literal 0 HcmV?d00001 diff --git a/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg b/Marlin/example_configurations/delta/Anycubic/Kossel/images/Version2Probe.jpg new file mode 100644 index 0000000000000000000000000000000000000000..f1f4baf2f283af826a79907925a4d13ba808e6a8 GIT binary patch literal 51853 zcmeFZ2UJwe(kQxThMcn?X~-Zs=bV!uQ3NH-3_;Q`WXY%?L85>l2m%6%fRdA1rWjM=%Wt4??Mb(?q)fI6wF-T;uu)upPLaC3 zho=W{l*2WROyM#j8UR4F9}WOK6hH5(NKXe8+}PRE$J5){6Af24m4sWmcpyFfy#X;1 zQE53*Q8`g*xQMKrq?DYPEC6stX8n{FS`wM_3x0Tw{fAVbJlA-RVTcL{i~N@Mn%GYX zAu34#fDcNJBO)d)k_7vy9kf0P=NH_U3^}HOKw+RM0it6~p;IZ)U;Tba!TE(>O~L=s z7iilQ!XGdN2owFH-${wW@`MloV0B8;QC~2uVkyagz$w4syq|K4iiqSve((fGFc11u z7xKJ3*iZNbIuG|Jj6;x5_Oo9c-hA?3ut+||4?f^17yjf4Dpv^ofyctIKVZB+V38x) zKnXyaV-Fz(%_vhScElgFK8{wQ#1Rb(2s;)^9>K&QdvDfdg>tj$7j99p6EQV0)}bp8>BUdBFRB6BM)s_W8##k(B{J=-A6a@A+XG z>+9j5*)jn|LJ$Ep5fzsZ5d&+brKKc}D5$_3Yt85%cP#R!bs?Hsf~KM}f}-M*?(T3$ zVR0czK}jJgxUMPO+|&>d!6tD@M=?=sqoY>XmN?+!^E2T=e)<(SKmDGCaK8SYg>d%& zoQ0r}pZ<)C1O4Um#NIy`f^*)u`xeF|jGBH`3BGZf0iX7ZlztDlWNqzp|>jrnauWq49ZZTYE=mS9j0g>!CNp zBX8f0PS4EF%`Yr|SXy3N-}t(@wY{_Z4XYP8iyW)IgT z6KWItPb)9pbKnGh<;<;Yu^|cTHL_X!X4WWmFVNp-_5Cfs9;ztb99a{Xlb7sX z@9UR)CTS7{KIU@kH-@b0G?BhnX@D~-xHOQiF_K`zH`!q?K5?~I1ye_D(w5j!4K@qa1o=Q(Q!24ABH=jPd!19`3~4e~9n$Ii? zJ)OK&NuBe6Kwc~8AdM+juWAZ`6Po+|Vzr&toQQkb`eH@#?jdl}BlmHzDp9zaWOds{ zhq?y-X1*=)DX^=R^2V^NY*q@bXU^Lte2wtCb}c6C93z^1XLj39cib!^yfI?`jopP*I^AQeq8U5&|24EncZfzbHE}e=fV-S6(mjmS0XDSv0I-$)bAjbP2?>i8!7@Ebw$lSnhgH z?(?34eGPZe?j=9%E-H?gkzx2)h+y3s8g46C@OXC!5WVq{S@zxJOTh`WnWf*yRYmJy z(5ES;W}hg3ds8XPK=Pv2!g$=bds8VlNACG*Yw1|2`}*R0N_n(80<*ES{_tD!X}vX+ ziC;-VR_v^z@lOLWW^l}86N&dHg?)7?+x^ChNd0C}>f<%EY@%rG`9ys1&dtwSqdK?& z&t_#L8)X^rRt9y9Q|tNgU(0|)+u!0N@_Aw{1u~w?XF4RJlox+Mt4r~|Mvj!&Hqk6n z=ChP~P=Z50Y;8MLQM+VWj-_qIl4-W*)1{&Nr;@(h}FshlF^JIECAqJf?j!zYpzIZ5?Y1boR3F1qmjb!X`T?V2N<3g7r4gyw|%qk)~ z>Fwm^=m77LirtloGKR`WbqO=wbOCR9J!s;mBE7y?u(b@iJ1H4{>K~-sE);{TM0GI- zw)1J~dp$4A`$8x1t-lD4zp`E(T>=R+Y+1}ImAV&dq9*jYmkeE%9P#lPOKY~-9L|O1@ zYxvk-)H4@&$6e&LW~$BXUHoGIW3jS`EZmni15p&z^6^p9cn87z>?uTXnYnP~vUtC4 zznFJC`5NtDjSNGM#D4n-5#%W|+H0UZu!JYM|Lv9((G+F4_ij+=&C*A=kQReg8s*lM zY0qyMK$dnk_dnbyMA`cJrHykkYK3%oe>nt(^DNn%VlHbxrufXC4tWB4uHxe-H6*tP zTv*I3OqBL8R}QR{T5P+ZkK4AA^`>mt)1NVTJ$=eVw-QNed14f8l=bb6UXmX}ls0qV za#%)-oq#%b+1;C$Ywulrpy*+l(6YEzUNzkpBXzI*1#w}rgdbdvLX~|SDkjsVoQAU6 zD?UvrdB*1D8c&q)rV-V<<@6% z&qc82R=0)1ArLl>zT{6ETS{Mc`rgaz!cp0eP1PrFNTq(Lgr_*~cYpRJj!cHC?SFdv ze2z?IY1y?RaXO?k<)c(?p+1{i!L5b^)p3L;M`A^bf#f-X-1{$lxud6(6GnPNI5Yxb zpGh23>A!L~ajXsKr5?~`2PN+7ex=Bq)=hh;D4uxwYY>vvJj1JZb?CufdqPb0{#}K9 z6&pZBrigpL*`s( zORvo)bG-bTRLN_i5RZsQBIuP43M9wXvhvyQe%bOdWsg3)vU24*8yaH4trCDUdpRw_>QQsL5b>z%+y@q3z_y61`TBX-!ewVClW5 zRyQK46`1_;h@l4ID$C+}hk&$99_)%i@=N5)5zDIQtSiAPExe;Lz}ErOmCZbI%N^P< z-=JCj#OfX-;oUA{I}*pURj(h15Q4vyM?aT#e>8uUQdBs*17Jh$=8)91 zrJlI$3|XGKM}l{;NtMBogU!fe2(mm0;hdap>YrTW_c{cU9V+rafWIb3KPg15O2n(B zI!GmkS8=H+9nS@FJKX`+)u;gLgR5nXhXBBS2+Uk$Y=H#mZBf!ZVR@aVj@L&)khpMD zW@|}>$*5g8%I{oMH1pO~C)%9$B+jw7??^`&Gx6m`LeHeW++MO(4vE#kkUmvNdzQHL zWh8g7=BkiyP%__o)rW!0w+U>?oUfOTr))Py0ys%4&IpnK{ClM9bslj`SzkwAl*-f8 z67iAn=0RhDqf8CPhku7&a;mO{&^LF-if`+@C}S($XK5$bG(hv2Z^z2+GUS{0L^-wB z+e}Tx0pFV1sGfdeeV=zYln=bhbw}@u;2A068XBKDd!wK( zrn!0>w_ei5^&Zv99o40RIk=zxu^%BuV_ZCZjC_62zCIul8_)pM-7uyo4`276F!pYu zt)`B>>w5U0e%4{(Bb>Vv9D6rJtGPLNdb(kk<>W_vOtl&cfrHwcfr8H&HGo)X(u1QUjuMh+JdVE;dMA3rQ}v^_IH z!r@3yUk4S>DXfG?NgLzwPdGKVf2LEzAkEA@e6%=B+^{3@E2+65;r|M6;_c>hgf|Xw zQ!)8PPUMF|_;_M8?0xL98XO5}>}2fybI`CbmKeMr4X6Ri@tDm&bZZ7ilKxeq#XWZ%)z(^m~ajc58I9?8IH?f z&T_U^<##j%ZI}i!ef!LN!R0%FS^zHZn#0;?#V zgQu?t()%BtG=vW}C~_n=);--kJ)FSuQNp_MpJg>4Pxs^Uu^1*!&OhppRKoLib3vfI zE!+&S4+G>c{oo$efoSY3gMU=e)%b%qz7xjN7yTC$o+rk|$;IQxGe)9misf!}gadhy z+WY!=YNI?*7<(TS5<~!If#{#JDA6%77K5$PJ)TSdZ|e{9#kl=3{em51jsI7Sp|{hY zQ#3dz_HI6A_D+AHB153ScBlX!U2h#TLxZ1F4#7|KUx*2vJu#P5-CUf0T8jKwd7YnV zP!4=B!eZ}xGzAj+p)fxGg52UK`mf}~4o>QxZl0Jwj7xdUUrqa01=s{Q?dgHFHKC6u z8vNn&M*ZnHL~fuX{S%hN!P5tHsDHu}gG226kK{*B6fd?TfCRjt%Bx54@l#841Y=$J z_$kFw0J!F0hJ83(!7C30H2|O|9K_24^Z*2m$gKb*M^S!TbwjZH86Z0<0Z5PrERO+K z01^TM0zv{3FyKZ>OhimcOHM*UPD@WsO-oHpPf2o=e%y`=|CmEaiHS+cNGZt3C}_yY z$Y`(`8O?DM%Kr(2<5*oD;0lAV|BThW2cK2^!#0RADCJ)xb}%q<^)q4z9;W=Y68!b} z70#moAUF^(ln2Gd$0NXnk%%9~l5p6lL~&Km*i*B6MTp_ifblLh4o+H=XAa^Ln8;V^ z_*^NbtJ7-;Z%MlR%FEmusb)yc=LJ4eCkD-DQ0rA!T3`FlZfNn`D7;#o);2Wv^=?i3 zoB2%(N581_qS}t(g)M1qODF&6jN-b^k;QE=>h>e-28I~Hps3`L2yCKMIG_Yx?9{km zD3Jy$!80(DD9-6HjfqTAH>E{*ORRC>VFkeFmV7=43Q=$ZscA0dgPQpz!v9(Vp5G!I z{xyVVmZHnW$C;w5r^}gQlA_Cbqwo)e>EX-Ge?#!<-w_P{JA&6g2yO`0HoAt?%1AYi z+HA7`P#Y6diKO#s`UX_f-=o9kOvS}ndNmEbCRE{c^*T(;3s;=Cv}ybvZ58WsCh7et zxzXX!F-x=M4mk_^)%?kC(fk*4t-uY!M$2kV%O;tI2c=+QO2s#)eq-l@%rgfM_bDqS z{GS{1dWVh}b6#B3&aP?K|HjjOFYE#9gwLQZ7qJ&;9z7E0&kKnbQXI)oN^#!>Obd-E6G0&dBI=+TAVkV#FpMzXx9+6z-FPpR3E^HvC7djanY zZ_zI!$&o=y55Dx%WfzmcRrfflIXsJ(zV-W;R{1YIZkbk2deF2ysfmt8^o0o?0=tp| z7!4wLO>rbLg@D;#P<+JuEquguz)Ag<^1BRp(?{Vmc(}A-gBR>Kqf0jpSXzc2-tUo^ zMIe086$*;LD?zSgx z>wWQ5-hH;;@+_n?f0HEsn_%VEqw?~>jwl27(N5QJd9Ivs%b>1z5z5{Q-S}yEx_%Ci?n(O)I;Bv@7S5wi9bx5@L zN(gPkXa6sXpB)!vy=}pfYHu-I&I~x=v&{FrES+d$x#W^ys3`Xsv$ac9NWs$Zq|;7V z@i*Gh!X$|zTJ!UgVp&=I<+V|w*C~c;3S7?(C%$ks1BZ?8hhv)_j{K$j|HRSX9nZLI z;2a46M>8yTiX{hB0VLoFH~=UB4j2Q@AnXHP-bWC2$wK{aDB$4nh$(QqTs)fVkJn82 z;5rGM=OEyDGU=qVj}KZ-SlGi`$R2w-D}?ZL7Y?vT3yTVg2m=br0cd-KE6NA%fC5(y zitJySTG-((NJVx_Nkb7sv^vV!MduO*WqRqf8RC*FLKexctVBwr5Fi)ej&?`+*uw+d z-8{VI0um6ut&*0O z7J!3$ND*NXF=0_LLGX}RTue?x1pXtjgWVA-V33Y-CK_5ldIL*}>_7DK_xBg_7Z>ux zI0=i&%F1H7h=~b;6oTG?9zON~f*#%+M?8+1XrR0i7?-2n8yw3N+?n|LD6)g%9_!(b z{>AxUTI?qw67h=;4K84g`bQ#!QEn)Al!uQuXkAgP4UU+if1Zc`YVsG>zp9Uh<8BWM@8WLngc81pMme#=f7wLtXt@MR2+Ah@Ctg=w-5BHP=;8)ec!L{XxUQzU zl&Gwfl%SZ9=%0jG5st+Mz517Wf5@XX9kh&)iwjatLPSDL zR!u}zTvlC86O44oNK1*!NQdLN~vicDGavN@I?4x$NpzqB-mD5>wnhvcztf~ z_8;-UJ|KjI3P%njr{m%cZn*=GamOxiit_qVJTAMrz>nNT&K`jcVu0qe_d_Ase;{4{ zg$e$>8pjO%olzjWUpD^d(LN^g_H^{|x5uDVoj`N_oF9G%o&I=fvDLZ~XrVqC}uE;JFdR7^D_Qf*URnz5>E-{yu0d9vg(D zad5@LP;B^-1_KHR!t_|!=@=F`qB(|DurSiy0}0Y#Wkw_2kyyA5gs=JeV&m8_0}zh# zb3yro@DK=dy7{`hfH3yZgvK3Z560GUumMg^9~8nFghfD@1Y>3b9z5YFfaeM%PJh4- zf51LqKpCV3)IHIGM~F}Q=a#~{J&tvlM@BM<03L%6w=&$r|34T%juYo`M6T?SXW`?x5f< z9)H<={=wltZ1x8SEO_kKAV6Js0MOV90Tcr?0BofXz@a7vU^chG8pyA4Ga$48V@UvD z$+~##_aF?`ALW0^pow4+>h0nL$D-9u%-{%Lj2{*Tp9yS+3m$8dgRgco04x9pzzYZh zVt_Ot52yf|fF583m;qM61pom?tK0z$;12`?5kM3W2P6S$Ko*b-6ax2va-b5Z1Db(n zKnKtZyae6=W55(J4}1hxfh}MUe7zJOLJFaVFhE!#To8VU7(@o51kr>TKujQ35Icwy z!~^0B35HyT#6eOZS&%!Bdyq$v2FNo=H{=!M9b_7^1X+iCgTkOBP#P#Rlp87xm4T{4 z^`U0a^H3+K7xWVJ3N!(F6Pgcw0Ih{SgZ4t-K&PM|p_|~F%fv7`7#mCwCIeH48NtrM z9AOw(C@dD14$Fs?!x~|ou-C9D*eBR74jv9Q4je}iM;=E9#~cTN;#3Be%2BEcRZ1tAxq9H9{*k}!}kk+6`kk#K-;o^X$dl8A>$ zk;shbB2fgw5cA{~j4Ps(qc4ArLGsG^$;lwwI9};&FPZRHwP?4M>Q75q>@g+$h zDJFSJ@{VMKl$4a4RE6{$sSjxa={?d`(h1TXGHNm*GF>txSs2+ZvRbl1vd`p%J3Lo!1h!~2ssCr_O`bJG9h?UU^%KQYoU$}=JuV;L(MN132Zr9O3kXo>cV=1wS{#VP77CsyTNb5+u*C<+vGZI zzHE2c`q}o_dDzX_BiSq1-*XUg$Z$Av+~9c5vC7HHX~-GOS;{%eMaU(?<;<1A)ycKZ z&BJZU9nD?G{eg#`N0;XkPbtqhFDb7wuNQAV?+_mzpA4TXUk=~PQ_xeAr<_mSIyJx# z<(J}j;m_fJC4eg+E8roJFEAoVBB(0pCs-;tEkq||AQUN7C-hmEQ}~>4vT&#HfrzAt zn@FL^m?)K~o@k_Kqv*QWDKUiDEwLeSQgJQuF!6fvH3@zRl*Da`x02M7hLX{e&n3T0 zNlRg*%B7a1Ii>BSv!zF5Xk?6K;$^yIab?wH!(^LfcjctyeB>(SzQ_y8yUO2}|DeF5 zfKn(_m{nv~v{$^NIHd$vvQx@ano?#{wpY$qo>AdYL8=s~EUNOUUQ~Uc`dLjx4Wm}0 zwyiFw9-{tK1E!&^5v$R!Nu_D7nWZ_Q#jfR~RjReBEvX%({Zt26M_(sdXGE7-7omGk zcU4bXFGR0RpG4nOKTChc;FJNzpwSR&sArgJIDVSzw8!Z>Bfv=4DAnk_F^{pAanl*R zGsb6bomnsuH3>H9G^IARHN9`TWu|79Xf|ffYwm0Q+=AS~#^RpEwxxz;isjT<;jd7kqD=esYQyx?}>u`Ri+y=|2puAQab zeY<^oBl~>&O$S|vY=>2ZIwAw{5vhW_fm}i2aoRyu^ojEP za?W~lOYK%gHdA&?_I3_3XYjVl?ebja+_>Ctc`kWx?`Yqt&F9WfFTgACD_AJBDD1o| zbN61+$)dQT@5LU)Qza%PZTF<_-Mi0pKd}^A>RY<>z~;frGL5qOa>4RD6?7GG4}pii z50@X=JsPgmuY6u5Q&nEgRh?Z!T@zaisST`Mt#huMs<*0t)u7k#yivZfrb(!&xS6f_ z)??boiBE{0TzPWXa;atWDf;QBXHL&%pW8kkYdzaK)OMz=zg@q*t3#`!wNtgTrAx7^ zxm&Kgp+}~tu2-tJwokIJ=7r>ontrMN+5zc-`j@gV8(%5BdNQay`0TaD>y9Daq24#A z-@F<&AAUPxGcxrS`S!y*w|8r!exrM1;p4dDvF|C~r%y0V?wc{4 z8Jk7Sew_23+n>L(K)R5=$hvs%gV=}WC9S2G%ht>DAJHH8K1Hoiu4I4a{apP;l`9dA|hh!Sw21? z896Bl85TbJ^agB=Z3X@(A;2fVQvAJibes0`h8`oScRdK}};Gtb-gswNSeCu4VXmAFGEsXHAuc9f@1Cym5C zp1Nh+aNE_s!+gKe6y5z{KH%e0Y2Zxm*hO+u?UGxzmrI3+bsZzmu!m3UkTyrTQSFBj zt);V_j>G4v5Zmk5b-KYm>XkNp@bTrIL+noZ>kHo>Ng86-C-)H3?$@iiEEtf3af+S% z^;f8~0kS}kSq4S%3duuYOp0G;E+lCBew99_SX>B~H3AxYMqCc21zN z;B{umqVl)yt2Mi*Lm)gC^U4-~r@-WUmBX9ann4AZ)valJfx46@R|!O)=%30bB$SDN zt}`%kql6PzP}{oYdo|U;E4TfiDWj_KK+&q+f-#;iM7bhDvem?m8D(kz2M5)1dAJQ9Q`rJNLMqi;KJ8^?)js^09^_{Qu zLgFO&ZnW}nyx^xh%KP{Sgxl|FSD6oiE6Q#@wZRJf7VRV9JG5YtzTWQ>ea5vQX`l~)et51b}xEEhjtUsc|EFhWxm`jWTKy3O5_G~U{*XibRm zQ^Z3(D#8myH)OqA-IN$ZUm4yVowNydYiX#<`uep6UHA1fo3?VV0tP7#BXKXW+$aezQf-H8@JY6e-!*)vVeyCHm z*_E3U>%Z0ftXevm$vrA&J=BD<0IsysTDyZ-E12>B)U@ZfFTI+6cb1$cU}HM0eReB^ zd)q3_Gc0IJmV027z%mNud_Ep>UP`Z}S@5db6LXWSCRf+A%QM+Z?D>&#mVQlj=c~uR zQ{>0;_bT1w%?IBz|C?9w49$iQ|Ioo^^W{T;S#pPXkJn}8e(0M6-u19y_30HQx2wjl zB1*=tKh14?AHnc3-oN4l^gvjtA9b)UvfmyGJ?QcebNqfk*skT>d7Vh)4nj5Q`m+xhZf z9_m(DFrVtN(XG_4VoZm*B+pM}XD5W7N$_U>`a$3Dua~K(8o^|uY*Icq_ZmAHTo98#Jt2h`tu=UFE$4{Fn zE!nCHyfwceFCG}iK@!~81zj6q7!4RZWBVw5LRr#(SK5W21L&A^QMuxdGhdsD_o^33 z0@bbZYgsex8eqz8-oPo zef+p){84q>NqHvs_q8Hn;0toqi;R{jmo&Y-zGoIKi%GUVf4Tn--W*{``nbuCxzodM z#R2m;RVBimJ?o8Cx{sMI&D4T&HU|@IgF>_!`T65|8qM7Y=ZG-#_vm7uNalXJ^gVaK zDmj;zc5OlCf~qW$lE(XJg==pY=jJEy62!f@YWnAsgX`bDBU(7S8a>Z4VcFM|A;TB} zoLPe)z*(qL7I|i2z|+%1m(2>+JchX}i-^QmxQZr_)fGQD*->j*`>ft7pR)rh zQ|aMTf!8jF`;)?Jb~zY&jc)C~LbSc=4D({jFcK_GpX%V=g|!VvU0=&hyGC}Oe4Ohh zd8V1L@~pmfX%qj4QJJ=pDoxr3Gu|SLy7lu6XQz_1US@K=+PbrQ(^7XUs%3D+8uLAC zO5lD1!$ZbUjycj+7dBmnzF^W~{>!t*+%dC_DUN#@#MIR%AXX>oMnh4!Ne_zfsXW-l zc^GxMs_zE9V;CC!v~Ei&*T3~>^l_UX_m*tgd_am7#XXl{op1Q2H3ru^-Y7S7+Fz`Q zd%{DgV80q9^v88__U@8mRA-Y~D#$;D267Y7NMQ-^Cm&=QwdummN zz6%Pe1>@SR?-1z_&JSzX`}7_0WzA0llBLO;uU<*;c>bHL)vIPE@-iPn2N;_J5JB|k;Ep$WE-y5zd| zo`SItJA1TwDyBPk%nePn0^HvvyrV+mW-!{YgdfOkS14us#Eiw?`|?Kr+uQDzt7UlR z3SBGHVxmvK&ul*(nD}xzB1!&a@uhWrn0D%-rwJ3ez~%L94EY2DxL#STcRN3nBI6dk zfQphC@g@wlyNN@lD2J9?`*13u_B!KAW^T$Y_29iw)UJ1Sx@~5qNFcp}*QC*%jkK() zc`e6MkD{&qrA)uB>olD_-n>+-Xun6CcsTouPyA1)>3rty)#iH9T&ZKOa~;( zhZ5q3chi$g-67%gNfhj8w|LKZDq@{goTG>kHi?6b=s$UVw5HHR+vDK?`kEtUxmw@H z@TaKCp5AKUw2XN_0Z-AXMUtGDsc>EXK$0@1HYYoCA+xGVgv_FVQJ-9$0bWVx9!OiiR-wZ0M5a%i+dT7>!q4Eu)TEk{fh{8uw}v)6u)Q(IzcHc`{rX z3}=kTI{GJ_GA~&99elRm(B=%BuJc3WyhxB?3dit=bdNc-BygvEv3QiFPfDC_vmf!BD5pob!mQP$DV7E6`s+aCAE~Zp`fGPvOsm=zGR1qPNJV;G?aU}0z0qdqg^rw7t6ky<%+cmqV0!qm z3u-=EZ+9y9X-sLD^Qe#}jHlfvIam2&RpzuUJo56~22GWZd^npH{sbp%dwGB)(N_Y) zZ;+x-^X$Y9J^fiRrofHZNG?x%8L`%AIx44{%AG*{Zo-aAc?{o(#zfNuU~(S zHds|PH8M`VKC8{#nISh$Xrm41yptWM?#XpSmxC#ZL1j)#MUsBG>|H2Q@0|R0SPDTF zpMoTFF4ehS`z_fVGp)+cmgasqv*h(9UzKcE8y~(HcK6_UlmIj#?dRF9VUX(8_rvQQ zDtSF`20CHlMJH@847aYJ^-MGpBvqMSY6F_5xqA3K(^5&(I8I54^mokOUOQ8j{`ze7 z26tV3O+=a%^>#~h;sB%WUjIp^Da@G$bla!V+&0vi4_=}C!yK8P7E*hyWfrZVol=uk zb9FuR_>SX!XCdii{g^Q|7Rwo*txKL!p{&(g>ymA`G|l{;c#E)Z-=R+q6A%HF(FaZH z<&T!%@}`M#A#G&k)~HLW(z>-W%S)`C?MVW&qoFK@-#E7ce$Ri7bVv!d zW8X-BPUnDkM`v7ofJXG$Awa$7xIt?qrZ?yQJVk4XfRPwyse%_ye!*>jf?s@btFtpB$XOV^`L2*HQtR2PNQ`l-d4T`h=&icJ)DQQ*fmXbxy-m zg&?QVDo=Hrx2+AKpW@=(5W! zlg)$}xwo`TE}1hcQxIqPI_HK~j~Q?Nq6h*>sfl_^my0#d$YttbF=uD zQ#@kSI(n%y-j-4d6nimnBzNe_%zb`3w~;N=RGY$;aCV`_B4)zw)j;RXTZA&Ql+@39 z_TzO)-n|@}w{LNC9uzNKQ46&2V2w!b=Aj>8UiZ#*A=Y3|khDt0+(5tGkS<`F<7MD+ z;kvX}3-i^UR(RLFK@H&)8|z%O-oGRwLV$1xV2;25UFr_MXU$OR~TmGQyxH<=9ZfVyfTLR%zT zvf4=R5Ri$F$o7k!7JaA9BkS_cMlQc1#=$$#)8lTzp2nH|PPnKR?n8XoTu*%$Zb<04 z7mZ@J@893&#Ar95Z;_KdF!Qdv-c_P}4aUJVuN0z8bv~rn;6^FIu$D2>^eSh#{v&3B zXLeKJt>GA4Ro9EFx{X$J?{CUIG?Qm%M`R1z&U7<$q9F|Ori0RszLIINm|nSnDx=*( zE3%i}Y>+$JB!!o|`*&V3?x62f63@LJQCDh_h$xEgOSZY$Z4U6uLGju21H)5#q^hX< zXXBIqT!bBo^tP& zVPz>nZgQkm!r)V+5b9zV*^vo+j%hVvcywEMkR>^@vQbF=gl{C3mB#1yhAD*#2H_r=g^ zLQ9f)7TI?mVYKm8R&epE|M^qBm;V8)<%i3@TcOkqgR}xR&@p_%s2dB@TAZ8cE*?%+cdPXr?z)RUcENjZ*H?6uG{BW@^RB57hY9RU$AiL{X)va`Q_B~Xb&rhCtvy|f$ zc_x9wXZm|2uo$hU^tiqmlF}zy_JQZ!&zqf?%UkGL`u1XDc`IU+or!p{A5QmX>K zrzt3~59+W9)n&4myB`_2tztB{|%-EdQ118O;Qk&%pHi zbK{8;9k0?|R8Xg$rc^wt2$v5#wKW*)bYti1s87J_#G}}U&TT$+! zpy^Thq4v=YE5f&Cv+43f$p>4C0Wz}enZ@HZLsk49=N|@M!KDvoO2RkpK74(Xp3RJ%p=0-51iuHRRe?jYUKwp=A`+MPtL0^DWiA-oLZ9&R+kr(FZT~KEyjP@d+@qfVBPiwhsxNKR|}gw(A-FqX&0xw(>cAwn*F6vkpb-*?Hg2qI~(xkB59MW67r~0Ulevu=xsFXm1 z?2f;H-!_Cx$tBrQr3V(};V(r0kU2AE{<3+T741qoUzTj%6Ok2sCQnVna3_3BinbyQ zgZ8@czA$}ZMs(o?hmHGKeK%9R4IsbrzJBq2EBdk|MTVd0n>*{l=iRz`Dm!4;l2%-X zNblo8m=*fSpe4$_=a;J93l`;YeWWjPoF1+OR#zf0aCkOXvT`)yO`P){NW@eNs=~ePk)PCPTptIM{lg1 zWzEdx^-9XGb!zkn>RUQ!R;IRApxk;60VkJ~af(7tc`gUW#G85YP36!#0I$Qv<%h!2 z6^3mW9J-xT1|CI>mY3-4deu8UY3~-&?!7@PJvuDNW7t@4omg$7O_S0Su-=w}M=6Kg zBzeT5S0XEOCN270!i0SNIlBpD6C#jKSb9NcvTt!@0q(K4te3#NVf^^>{(&Q=rg~kx z=7hDOQMbO`mOGHxeZlNre6k1=ztDgvT9@-P1KXQhT`g`Q7X_7{J;AM}tLkRnZYL)d zlPBlz6`hEwikfq$TZ=4SfPckL-}<<8w=N46EBv*q>?T3;!{`3=!LSs);7oc2e66`T z;go}+jP%l}?|)Hh_tjr0w9Z~1({bsT?LdpaW%*upVM~2qH@HQ7W@mWPJT5dW zd2cdE-0<#LcOBXp1}ri-G&@$6sT-p2KWm-}|2%Mtel8;Mw6fmql}rg{$xCTl4MTD+e^e*K)9w%CC7r?MAA23oV~ifB+4YT+b{4NMeo)-; zXn>@=E554Un1{05tNhyedVkN-4E05OE}(|5H$Bww5U?HDWqMJ|!Wgex_h}ZFOT_@? zl^xM-bBD>_CQ=LFi70%Mpt``XEzUg%EiHg%r@q`s(h^hYf9YHkQ+U1kjWI(y>e{0j zV>*=v7(~TRu|MFe?}ub}OWp@>-`CvgF%TsZO@0bQdZpe57;r8z8}XnVm{)s zgt=X)?TvJUTJNU$j_0ryE*(#M%F54gpSTLRK95g%U-isb1mH>qLPp(Q)#T+OO#}N; z8pI9F?c<%vW05!QWO(!DgoXM)NmMrS?Hue@SGl4eRkm(r=vT)CIG?v7o?53R=AiC+ zPJwO_i8iqPl%uHc5m1gWQ&&JE(_?TbgoNLt?R4K(oNBd zK^IP?CVYIDouoQytyH5$>>_!c-_Uor?gh!Co4I{G!jx2)yqI zlPz#Pd8i0Ylq=qK2)LyU<*iCZOQrfs<$}AR(x7`B>J8;S+YzJFXT`6|C#5+;t^r9f zNXv*&%Zxu$@-u#I(g)ij5^>z`Xy|*o)Sd7&9h1fA5no6a@j-U(q)=g&V6lXm0Q=|z z$`uFxo0)}DD-4m(x3uDzkT{0-W2G7&j*E8J1xXK1uC}SqSWJA}f4413bH#6~-O zcr^=p>G5SVI_>@6%K$uIjwCGtzkbyzCR&A&hU73hTj9Q)2?@*Ror}AyO&FV+k!Xob zX`!XEGjYO=d;_m#?ys+$Yy#?0no0ZPDU9>`2lk)E$mvVIUZp$0Ssh4kPm|cO4Dz?- zLK_vUf`>mPwFfA<#f(Ph&^LH`E+NYZ?=Ek~R)HZ!Mf}iK4C{MbbhLGe9NpgcGh; z;JqF-#XDu^Cqv8W-O1b*CxN86ThQYnP{7*$GSV-b#8-0p5)1x43x+~#?^*^nRN7fX zZpIh#4Wr&2qS@I9;_eHOf^H&BCO3v*lr}N@3dt>c(N20!J1R6FJ0P#=8bSIrV6Hy( zUcH7kuLI70f@t!35=3D|s1RHzb2T-^5;MKvs<`>6wCO{m#Cn)?EH)|CcP*`-Mr9L zcY>A?7_D(ap$M&&R5*m0L(8iNfevMR&7Tn4uMG5c6tzztqzwv~(^w z@}|&WEYxiMR-U@sorS!Fo=trUSZc3}kM<6^?_JItU{3Ay5;EY2b=}|TJ5woaP6CD1 zmHX{2;u}6WTg}Kv(~TZ{U-^7Y$Kl-kET;Y1XlWe+5lKY3A@*rv_-=|JR6mAJQ^}xG zX=jZ0&Q{Dd`Z+$Fyw;F?yVPu3a@Lg!GM5qtYww$?VpNm`4Fsqz2hOKlG5sT)Qh4ab z*M8S?z2&lc`zPnDEfN?RkTr*ZUj6H#k_(Q3kCN7Wm}F!*Ng@dsBOhA35F+!m8|JD~ zxS~{+Q%-5Oc67=((EE*?5zVu6QBn~wvGiR_vJ+mM zh;Gz4v#Pthwzmx-$Jts#bXA*$NDrOG1|k0;ps4UvWKxPbV}6v8uB}Ehpg54zh0T$C zao3nma6WzcsvO6Y5^++v%Zi~ao@7i`IUaWd*$i7Fkww%@%_nPHn< zaqGr4SatH^{n`cf3oG7CS&@Ml!zc3By9{>Mufz$sZtLKtZC|cmWQ37n_!kCtcuz!^ z`;y|hF6b7ypHLsEKrcP9)T!3bu6lw|L8@lw-UL+GvZ{-nMhZmAd|ib~H;~Qy3~C5G52LN_jWG>ZnLk4SZ;R7P8GKjoHGi) zjX#jF$Q^@3=i%Ug>di*vt#l%^ubnt?Dfrs-jni+{E=h?2iZOPO&ibXSc=^*7=O>rF z7Gg>p{1WF<4<3_Vn{)B$miqkup`9py?#;wS4VzA;Tjn=}1_?S20Z+G$ulLtZ3rP&0 zZRLBrOo&gp-dggNqt2)&{naC?`_s|yPe&jby>mUHzqacqEO^}uwKW==k9QStm(z-0 z*Lbk@g|$8B>0Sk6#7g#7F(I9<8M%yv^BJpwzGo4fPRtk%xA^@&`Atds;dR&23n5>SZ)Q#xfTZ-R&}$Jp_FCdAnqB{AY&}GpBkD zW4Eu@nLT#ey>p!-7I%t3)hWKjexQ$tge)Sg`LyX762V31Iz!GFYK_ixOLIqV0}5zT z-0g5GBVcO0@m2`9^+BC?+V!hPMV!>^o}0z@Abb7hd*!KdttxF2;q`07GP8V?7B&;55k1b4bwTVv%gb_jm{J3UAUjnmY*E?H11W;u*GUuhvcZ%oBo&g5j=K`Pd=;C zD?pk!SKsJcS`|j3tY%{b=EJhoYw6kyYo!KcET?Mmrs@}6XwQ5yD62mNXhiB)ua>n| zS#$NOlt$94H$MoEhw3|pYw3=Usc;gtul5n%ceZeTbaPZ^E@1z0WuUVT%UOdY5j3Gq zWatGI{_|#awcqNZ*%Kx-lx&kZWyY?V>BYu-Kd&rhn=Rlm@UrP_Exjxh;p!^NZVP8K zM%xtN3a4Q7rRF)4^dof^*-L8kzU!8;h6Gj&`Q-|PjY;3Oeij#$ZlWBiGa(vTkR~4^ z-$?o>1;9zS3zX2uP2rvR=G-HoOZLV$=|RxExgQgrrF-`E=Ka=W$B+J7eFE)P904=D zmlxt|&(^CE%67?osfn6Vd;(r#U|KrO% zq^qGgk7?+MR9QQE!`t})Lg*c%1Ru6iuoNhy?lE|{YS_CP0tNg<1fsJ5`m`79*fQ7% zRbY{KmRXdI9IU`I=O+6NOKxA4YiPDULiSKT1eD&>@cje0Yfk(F9C1EZ+^Km&yXyY| zg27b#suI#R`_a2#=bxuyftnv1eeG}BFk3v62KtM#{ZCaB=kh6rXonZ1LuLK}`Xs#3 zyl^MB9~s&-$Nm9mW_JGpmRt-6FEzrQRBY;vvs{s;JwM$u8E zlbaUZRhj&Bs)*R6;y2@7yrQ_1eB;s*e;=M5llZ901G(i0vFzeKQ9??vl}iu-AZXsR zo~x?J9$Zm=$S68B3Uuat8~@24V0osPvYF@#dF8ihk4v#8bXjP9x%%a1s>5ll+-d1r zVguqSd}MoT_)^TB-w3IuGadcGNUzu9(w*Rr5W|z2u0v+Hk{S-qXJ#sCeocwor}6DV z^#ot2*L>Zuy3Yg#Dm;>UY|_{0?fZaDB$3^R*cz&Xq8umL`l%E7>9d z30p}|gv%kAJ!7?dM4AP-oIW2GFQ(3^Dpjdt5+^r|QY>bhgz5`OJxxLY&dVay?zuna zxSVHSMyJMg%{e2P#-mq2DeOJokesw)o-YL64tCMLGcLboIhWU9N?L{nY(pq?yNu1+ z_~J6ej;GCeT*t~!(+ zrDf#q`47Oy#33GNOkQMNdKd7rc}6feCzHe$`Sk6YpMyx5y+?NBJYu8S98Dck;-D%Z z`~maRd0{k!&uw~{oi#5zJK${H0KG@oeGmohq`k3Y<}V8WuL)qCF>z3p4A=hiPT)5b z$6+S-={>hj;M}Yfdi)YfBOU03g462QcvmYj)t>-= zM`Qb$PYD~Z^HSbE^7ZkVR{mTAn{!DFC=U)Y<+BaRAeU&3v950NGEM}3T&G!knItkB z@hWk|EzA%U>6{U#Yw`Z`cb=*X2!M_0n(LbfM9$70KMkFDx$ZnGpK+>=u+V4E3-xA zC;Ov^f_;&$=b0}rG0)j|BvHbr>z8Mqe=qkVW0V5kOO4TBBBI8hoz^$_Kl_R}Ms5o> zNn%8a&{&*sUIeFJCdrOB>u&ozO~-5R+|}uFfB2{JB5ZprtMLb*eRVmbMX!~WVYl+4 zmfeqiYaS0v;tQ&QzJKl9zs0JkUJQ4k(cUppQrQ(04UbB!6s#Hm+*2m`Pe%ihB|kbX zKfy8zo~Qfi>y+75cUdlnw&g-rV>7GAYc4c2G$k>mBi;qR6{N^|)UyuxwHQf3bHCX$ z1azOiJu@}cFFE#}RUK$(XnpD$?`dm(RNTmtPV4gVa_&A4Q`vPu5x?U&C%HY+G;A?Y z?7p`dcNPf!VTFOSGB^$MVTrN%Gg9(VWiic2yOr|jL76tb)g3(TN z4}Hi3s+YK;EgF*;9CyoXwKGsXt{4?RuS;$i$7=@U6hMgzK5W=$?jTaWKm zH=}h8_AGSUNV}*Z5uz-DLMgaQ|3Vh&ONIi8aBSXOT)8r=nW{=7*8HZr zuZs0{zkfuEy!W4HwWEs(hEh=UkCZk%L=R6eaI&19?gB1Q%j_gE9-uuJL3m<<;w#lB zR=UY8c{|>VGt%D7&Awxiu+gYa@AqeP02PW209OLl9`#M;l98uJ#wV_o%5$j&>;c~N zdL@1i9OB$)L*;Q*U0Z-f=FHWTmT_Nk?{LLy&ZnXC!HT#w1j~ckLl@j|7@}?$tL_{C zGF5hEdGb>QI_${6{F+!iH@b(%hM3fFkSUuSHO|S+0yCM5TAnZ74Dic|6trJ~i>zh_ z7tg$CelMfHVPr{H!W@)YgN3`{;R9ap{ryJLe5IApgWHEeGz6Nt;{4VySjY1?1F)gv zWe^lS)(~T@suJj;HQ^LbY@dTmM2y=m>j)S3+XIl5)UIN(ch!r0a)o&hL~BtnbJ9NB zGFgl&oui-=h2$oLTT-;88U6&AM4O|cJ-3# zbIRTm>JADar=0CSa_2y}7aNnubehSDoC#F8puF3z(9hYSdCfdOYMCDP%1XUy4eJdC z29^@4Nx(mpuL(+9qz4k2HGyT+?}NfJspd^*Ta__JwRO$wHKGVspC{Lk0b1EM3CijP zi-!{H{{Sd*K0;#S_27_G(miMA@zI%)LAT0Q-tKMyep|MSH1(f0bx2Pqb?su6)X>j$ zCqgxe#hamL%aCnL814HX>D?}FSX%HJG+(tep$C4sDMs^p6}h4QzVCX&ljIlsX%vIX z8?Q{JVzy^Ie2y7KwyY5*OzbX#{=Fk+sqB(o z`YV-t=jeJ<9btr;cRi=x6d>kKw7BouRbN%ndVBi3W&C?{Jnpt{)$e%suFqJh`$e>B zv=h%bula*lw51}6&iDT{n33M`KYBV$l_8FX+Iow$Ty|N5`p3ocU-xe<{sB6Y@B*u8 z+ZXQC9zEAp3j=#Tymr_L(W4Q}+xvbdN9lu#NOZXO{Kmt77kX;bH5ichOG^J+*VkHm}Ml5t>xqc$VDo%4XMX0;6eeE?~H zz~}_V6C!x^c|t$j1l}p1X6QiI$2q#EL{P7CmC${v;0JI1@U7g>#}>syX}1kV*Wl(G zff?B?E%e;e=Fv-Vp3f1M9P%wXeKl9{S)M-9c?Ts|F0_sd&iRSTX*Y6@^`ivKQqS1C zS0hJShDaDUsb?e1WQsDf^Z{1n)$hHKu?BfVG*QLcVrC}*0P z&A0Sr;u@&~8%*QSVM-9vsVp!Tv;=wt!ATR14h98V3>GzviEKjLhgtT4uA#p%D{&WL z9byzOrcJOkMx4De5s^V2{vg-zJv=<$qslkWpM2a?*2B%lZ|2nZzz`65Sk7fRGu}S9 z9T|z*dsvj(vLS>@EzF!*8JeI>?+H3YBIn92(j5`SV8mdwCt8)xVt7}IvxJR3!bk*? z)18l(GeF6EhmyprW_1G0waK-BIyrz1YOsUrSwy!u@HvxjT@!OvSd>mH?8p4I@Z*U< z(|;PikM;^v)it}k3LC+QD{srC0*e8GrjonOi)RNdd}lcfdbYG3xCifa`)DX-@pxl` zMsB~^nBAont9op!Im}9)fz!iuWnl~n90oSU3p*dx4l zQf`GU7TXb{BmjI$6W4H~*(9?mjnm13=fe?V@8~1_oxeG|{NvTmJfGu1=4?fLqfg#C)u0jpM8Oci6u)tGi@ZBhR?IJuwV z%w^A$p{LBJ3Zc|}!$7+uE`$am@FM>0xOmHfSAavvS1#+rs8U9`4wOAWk~?(EX`=$* zhDH4yH7^wVdd*pPUkTEtQ$!-Ql8e4#8)ABwP$hGcO@N8wePrX_)}bQkY&=o_s52+- zpAx6dU|?!2md25N$dq0D1^2fS#p~@CvAYmyY(M6@rQ$?;2-dOCL(D9Z-|wd!gr}tQ zq_BiVyT$YQE9#2ni#IIo^SkiFuXc-AES}lOBGwgeZQ@ z3$airP)hTrC~P9wF$e-m--``pI}F$H09kxO5s!7E@;JBDJ`+cXXvXD#fUUe2mWYAP zTKrz$<|1N&0MfbBLraXrsIx5$#Iwf(lyLYdeGKh5 zBCc~S@Sz;PzqCLuQ&E@Q4#nqPDaxK@yk;lXDP;#oYfLp0+&nBkcM$Y*clGvq@hIbk zJ)C%djr7CkB%-e_rot96xxe@@X_|+=Ob|sC#@R}Dt>Tu)w-ML4ymgNwk*3^3#{h&= z1u(r|^-JnnYcl6WUmx1DOrAmo?v@Tuy~}o+(d@j}+x_x#wG(XJM?fkCPnC+6q3zc} znLeEEJ3$$)Ec{kZOfC7;(OoVeC5N1~x8623>CJdvCdnV?hAU(oFSK}cwx`EeqiZkU zz~kPd3v0H``hgnaB8wulc0hGv$gB&E`>bl)qu!z@Q@~iOE8cR7wJZ2;c$&Y*6+So) z9OEFtnH}yvqu9l-37xwJ{m!|4X=3_qa0N8e3j@P4$e2}&t^NTzSrKE;Ttndrg#@Bj z7*tdlvq1Ij6H3N#@BByO@gAWjEaw>lJbkBfxb)Z2P!tyN)gQ_Fmk}2Sqm{qz;|%tn zy{rptT$g~piKDP7k1B7sgJZ}aL#_*!I3LhqSQ;0+dR!FA1ql{01zP-WeZJCJtjly^ z${kh)F@g=OqWxVM7${6K9w7$Pm88Fx{0Dd=u0i7-+>nAbDbp`aShYP{1jU;IE-vnC zS!-YOCnfqgxF-aCwUg8#=-H>y%%oFN#{Hx5?Af(wp8*U2fHkrJ7hL8Y%jY9p2Z0o|kT4Fw2Szhn$LK#(?~0 z26c*J;^Le^txxoI(pYtIU^U{*7->rGopXSb5qy2PnWXgeQ(-j z1SpBbcYDUXphwHH#i>=kUzMlCIYCP7t7{g~eis%o))Q;}DYn6BHK!`4bd5vl=H|iw zJ{2n@HXnWG7r8V)!!V)-vp$F?J1b3mZv7@qD!5vvHR}6nJ=d;D#V(*CCT4N^OvmJ0 z&ySJAR!J0yPU(5e=dkL3w&UZvZUoIjX4crjn8;b-l)4pR;@gF+GiqZNe$#xE{5!Ce zL51+~$mUZya{;jj5h+A`3_t1N6b0$Cr^c48aP2M8ZT!fovN30u=32b_d4>^WBpFQ( zR!vBZqZEuyjT!X%QZWxZ zg%nxj=@0C-C|Y0*Wq9F1v%pCxfMJ%)16S&Jhd@K zh=O(fX1}wXAT)e$Xsc4mU{z!V7;Y?iiZOh8AL@dp<|AQ;T1_l6W~@o58PIi!U%M^w zS56JZXfg2Bb?4Ml{(~$6cpu9v2>TylceDT!#8sG^Aygfj;?h0>uhQR%rF_NV>{23M zFM^OI&3kVA7v`-CcTR{E_Dxeyq?)?xPE335-fgmaA#8pbVE3Oe#pU}K*xZgE_@?_TaiEBx4w}(GfxK+=e)=w7n@IkMRseeBhq0Y zZ1Qn~f=~3vu)6Lq;E}`m+W|wigQHh8`+8sb--x?lP!5$a6y>U%K5+@GTRLO}X-xul zFT1NEAKSbnGJMZ3z?!q08Dnc3&sD1qhPt~$irNzka7lcXtGLIO3zI*uKS%UC=-+zo z%YCwYUN+=gm+q9ZnYt{!7$I+PmpW0|TdPy!tbHrXEC5Nl1%95q0H;f(=s9_B>iVYZ z31-hY{YB{z+z z5cARd7{6hPToLU4a{HF=!PAM%weGHDmEy{ESeX>5oBP+4Y8q{+?>tdSwM$sMf6G`0 z&kdBG_zttQL-@$Nar(tY_6V2_5UO+}Vg+ zA%_gp5Nw_HD09kmJ04;`5|4vEE4(cO!ow7IdA&>0G5>CFvtv(rhXO3HF5cG~YJAZS zbuf5)RjzV6(je|0IUjB%jdQ*zByru!BSnl@^Ls}U6r|SD)xj2 z>|gwErMP6qT}Xx&+tHqg!H=ta9VQE=%dL{kBd| zAkkVq0MLy+^aF)YOwk@V=1NjYT0R95a%4c_oF$X8iG7}HO!w<^jjWa{*ZK2Gr6E?O z!cDo&w&L4oTTQN~rNpMKZ77-&pA8ZEOhX9f+``LL#e|dljl)6QoqsBZVMuydKe(2B zjSo3Awx6&`50PUKN{RE{*zlz+Fm=j%m32}aE-U$`5~NB9;ozf&b&FW(T7M4?3XxIT zLZXygol;-&Q0H)8<(iLp-#(UJ(0t9ZL6M*$H;$asAKEB8tktUiN{@za&I7+u1zNl2 zUl@@Hr4Q%jei!_mjNNQgB0Ea$d2J!q%`GLw%!viI%v@)9FVUCea@7wn zGeLRGZ}YKc^1&FQ{c5B?XzF%6E6u)XR-0%9Yd%u)(%liJLW~ zM7h{hK)>3_w`gPH=Z1fnO_PGdjzZW055?PEByQd$%yDsLw&bz90M>@V=tZ(5LuP1G zG_mK9b8o-256YSK_iM^LP-0_3V#BagF`4W1c9{pr*Z$NI5%+MjR8n`lyU5PZPCe8a z4xH3XJ@&0}=UuYNQedFLg1iQPUM={fJZf|6qb#lW@X>PI-}|xMya@Bl#<}-%V8)mE z*>jtq2CaH|u4E;O@f$eOW7}8ddqb7g9(a)|O7NZUqui7AbCgtH$z7n%+>_zfqjt?d zfSnVjj@s+NPMfB4Nu3&+vU#S;XAfQyZ;s;#G1HnliO#llIB= z#c|_bX}!|wlo! wP~q9aDPaK_hV27RRs=mG25S=YHp$Gq`9&du?5wc62~1i*Ja4 zjtHwdza8z$w>OWJD-(j_ohExlqLQD{ur9|@8T4>!9am84w{9Y71YTg6c|a$pj_6m; z{5s!3d(<+crAQj}|L7W75d_E=?X+z12p{a|v`7A>xl_qEZ)d7B$osO;i+>{XnnaJY zi_lLREbUX}aCIG@c|-pXP_OF~!0oNK`D`E6E=?PlrS&!NbpGB@V&?p_jy?y=kTjYC z%y^K7?86d?=u@|RVTap``8YZ0uH_$KNHQQX?jPa^ntn0 zrk0sG%UQ>z9b1g^6=XXvy^u|7$Cp7TIXG{_bqcstQVubRi^%``Q_JbI&POHlSIrGt zimI~a;r{@a2Dp-l%`VRTsS1pxUi#Jma;{?J?pm%1K>>zIWE1iJJ?L`dxT1Y|WepMf zuTvh&co+n?$?E^Yx$_Pl)9S`9yruIZztQn2?|FA`Ds!jnmRdR^pyb&8l%GTSk>U=G z-Ul1D{K{dH$J9Dym-6I^9Up@x+p0rWP0=r|By#?#Ag2UKdw8D-hupDjSUg8cAWP}N zEB3VIA$kM-1$4IDU3=`@11g+TuVw#0-+q-U+8v^%-`y#|g?ok=w#6sx0H@UPU||qRQ#m z&Chu^ErXJhWl-!9qR39WB-v)dX&iLg$lWE%ljz?@2<)a3pG2fNuURWBKO3L=UpW092?&F4=AIB)epi{42j$UEsX(JD_Cx$s4Bp_kn~s1bWw~+V3mE=b>j?2_ZJ;s*W4XRRE4M55x2lGMYh_{2xGKH6j}mPX^@Z-8wZ zIF!gBMBi0u%X-hHWmVm#v(l-|fmhDH6}~_RAA55FE>dV-NpM?>>|vy!`D}x}MJWh7 zF_x5juyMSgZ(N}Vu=%7^21oG@!oTn+sg1NQ64eqQ88`3Jz###7^Vs%>k4&bC8*_zfmLEm?V`o2*g9 zd=MDM8TE30tg=E870(kzGPq2hz)Ra3G7`)AcBlYhAml|IIIoou3fuIby8@MnAHIq^k&R--Rkd=LO80 zRPl3ser*<3v&Xy(v(2G^#hj|cQhHW@@HI0Y(0L^MPBw5N;&f@sgleQ#vIq5wn6X}t zKo3N^?X>g5yGi^?7vx8iSZ#b0?O(@?kz`4`+MU)(CwL|ir+*9Y9#bl;w@fJ+pH(%M zA1SzVg`j>ZPQIZ`Q||# z<*zh%Jo+yiuu9*)uyv|}G$mo5?Z?Np1$YGl*SSEDTa)1GVu!R$^GLMQ(K>@8VeO5N z!dL64VTP22WQPG}LX50xU=Iw-5f5}~Pf3pc0P2xG(X2(h-fD#eY zRznQX6GIi-P`*IX(7h}#7h4KUO$9Ha+rQK)Be&B(y_+*mGU=T(vJ<6kZSgM(Fz4ch zkEAR@*)LCP<0eIaGzrz3Riww5AOV!)U2u}x=Ci*^SJ6L6bx;4-( zU$Y15dj8FNTtQFV7SFJ0N3b(r^FCyr53bukDvrAbJR8}W7W2QN<)gcTuw$fG1^=$0)n-^H6|Qd)-( z>Oi5<(x(-{zK-In?b=bn9KbBu<$`D9$!K9TMX=t(;xYVKoa#*YYy!vJB5noTp3tgt?*vRr5@y%x24*~;4$TDsS70l`tLh!&)j&R~kdbQ)k7Yxf z7*5MVA`Toj){XwxOVa29ZO*1(aD(r#2i9KLpS%9|%KIXS#$Y~H?K*ix^@=f-2#DWt z`>^>6b{xRDB+#LL{+f$tfad2zPQ$wiMnwUAo-z7Q%3+3>(#*zVZeuNlc71oDMMn=t zD~?y3;6+!BWJ|B%;397(!-)6RnJoUbA#!RE=AABnDTC8@A9an2|6KEc1E{>s#J!!t z0$FNjLepwC^%Yn*<$t}_?A95|u?k|B2%EaA$tH^m1+6cI;#P0+1gjD)#@xEv8(UR6 z$2Q#nfw8=R=)}e&R%KID)@~HaH5)`sJ(sKF| zvL^>RCOk>qQD5Hnz2+`L{@wac@5@W6paF@h;7<@yd!l3ztLh`8#LTb|ZY`%mP>+F* z_LEf26<(B7D2Y&}-y*+>{LM&JHeZDuWs32eCPBl{Dt$^d(?hCAYP?`K@ROix(NP_2 z#22@I8Me{xS_2JdTR~;lXDxa<3SQ&!%s^iw5lKrh|49D6k7e09X@ghrkLQ66QK#@={4 z+Qq>@@HNWNDXFQkVYW(;?M-EIp62`>W;{u_=;yKKUJWLIkZ9N_PQs7z!dgn)#vLD~ zb}noaWmkrkHG?5eC$2t?Bl6WSIEVEp*$KVfdlG&dQqFVAx56`MVzB}n#p>%JQ#%IE zf1a(i=l*mh*)?7xI(8y1qE!0gzt;_~P_RQ;z$7+@PwMg7GcP0~K4cxcwhN!OTF9=} zPL|vUa6Fe&lY1__?^bX!tl0=QfL??&8jyge{68$#qNf#;DGJvvI^Kyd)l5E52zXwyAd!Pee4 z7x52`CU8j`BSmtjyhR%Yk?`7q5U_m9zXqAU{cXbeN@9OQaw3D;#soT*fZarufPV&k zBIegiHhTWrNj1S4&%vB|i9FHv3J4$kB^gqRm{kN2A-#Wtc-M(J%?N3mycMzK7r2^E z)@XX{Xj$EwkIFy5x-Gk*hUmc@P$ z83|`3N%=8j3i?CvQPw;*@6rV|7XQq2yM;NnP^GFNRR>3247F_%^DxQKdyg>lFQ4a2 zT?gfLyLQ?9dbC!WQrN=S# z-rWqL+EDKRFa0#A@PZ@?*cpw98!vYv)zKx^u>p(wh@{he?B=q^D?-}wx+yw0bScgB z9}jUzHxs199v_X{yFNr@rQyqG9F5>VH+V(w=yydc+PUp+>^dbZOR8$gEO4iwy`w&0IetE<}Ji@vW_c_9@X$2 zkq=&D1QC{wQl>?k8V0e^E5L-c!yoKxz}Qbg+sYL z+h_TPb&z>V5@axtLfx-LOE*@W51TSFh4j7?O(l%~lq~qY$un9bx>}O7CV2KW*+0&q zAbqgz?c@IH4xe9L2?RKJT0k+JLSX@)zWee=6+MgI5ES<(PZ%+sXH5wfH8fg50;Oah zcT+)c<#N{l`wVt>7l%FkwmJE^`{?NyD%iSVR^P)ILjSxPm7h$B234sj+yjtvD#=z- zokY|uR@y<+WoZ^nC0fQ42Tw;$_>oaaZAD$-`*$L%E1BVGH&ng#zru|vnUXCI>>j1l zRepPs^Wv@rQKp49G&;NK&bI4tS!S}K&91^olR@J%VpRu}z59in?la0FmXq0KtCC!I zl-F+Soe1LaCBJx}+*{83fbd@IooAXhORn^19OVpJ5So%>k7a_DHqS&8f}Tb_zE<7# z>0G-s+Tgrk8h`7?h^)8lf+S8b!kN$49U>#1?R?JM*_erI#?Oyh$MZFsd~Hsil1VKF znBBHpwS~g1D+>|6WNPRnz6?wqoFp-PgF`g9VKqFfNV(pEj|YnXlIxO8ZmUN@s&Nz0 z^@U|5U*A6f=56u;A8azuF-}#tz^Z(41p&zk2{HpFd_V{FOLv3C`R z1-F>fT2aQ`N^cx|~G?WMx=MRNP{WLB0!Xf677IE%V_Yz&m zNqT8un*RivKS**?udm8GFt%K-h8dWKB?|M<@hM!X08E5P5`$#o4&SQFYj7~_4QY5;&3j{w>apsG~_-gJpX?0<$JeEyN?xQG*vv(OqpA!C045 z%l+FLrZiWhaPsJzHxu&7Y?wx?M^Z0JpEUpz!< ziB|p7^cD`<+IT12Ib?4#_Wc#Cr?*Xo~UU?v!u z0@qw=%=j!R_qq&}*55~<)bljg{qf9=)g!L%_WVq_;WEkN%cV+$%sxt9BMiTO6_1a0 zNo!`b_=}sytF_F&OwP)GTuf@5CIH(d8R(CRdqHri(BzQl+WjDuMyqe+GfM`*5kEd= z4pdb;`+qt<1Lj&8OBU>i+63~cxJ(4U{@w_+#c2y|>g`cO%J;}0pvia5-;jlP;;s(( z5Gx;mhT-qpjOZiWnQ_G9FnzF7*SfQ%Db0PzmNIb>R(c#Vi_x!2W6u@{KTvsN#{;q5 zb2>jAO5!RO-9-g%qlN9Z{sX8sd(IzZ9B{b@evbahwHrW=yAKuxWi0eCq7HFpPQxMByvXU_(>0xy)2WuUx`IL1XO~gt!s^qDN(h)4H@#=aIIsEb_sMH z^XSUD5Jv7<6}G7&QX7*_<>C`kdzy~!VxKmhP-f9yH#_YM_{5i`F+?q+_)&y_GpqA_?o;Uz6@a217_!B4)`BIe zZ!IiSQ|~l&YRFtqyb3CmRqB*_EnBc=BH6$A4**Wcg48KF|AFfQm5}#{POa?>=B)B9P;#Q< zGfz#Llr(ClKa%lmm?$|HboPHRH5%sJpDSvOQ%g}lggh)ek78_bpLH1UX7xV^RTi6d z)Eg<&6ldl-n;$~qmYlVM{b2l&#zcbLUk93rCfrz+gka~-&Trwpa9pFQz%u##!jH19IG$<5AF&s2jlS}%fXS&S>-XtA_+mtr?A0@tN7FY* zcj?_Fhek8!4{T=anle>Z6`aH?3{YNGKGl-Qd>Ru)FMA%&H_{dyufPSAK2oG1WJ+rtn$EJzv`n zr{T2GSjGP6!Y#3mJzLXAD@Ln+>+#YL8jlR?4r0#z4-12p9!#+%EBmorc3v&+Bqt2} zk?4Z~que zNoQljttm{0MR6v9|0E+ecGo zht)q>vfZ^0xqB9`K)7E!Yaib_e^=>|S0$p0FSR^qu|e67pAgq4%3O6)D|bTpj&{|5 zcpq84>OA)`UI^V`!~IFTSU=fC+aP1d7Po;dWU2R6f$1@gU#@y4Y+W#6dGcm^olna+U%y?WuE4HaNWAoO6gJ)m+BxDOmHf%V7 zBqyKBgTeZa|EQK!y)x5reNNYPLjJZ-0Pz=SZ>Oc9F{35@b`mHqkg zgSk?!V&B&WMe{c}sIw~haEhuC00_?|T4j}^sy+4KdO%poGaAYMGibJ;DY(n`W9=AK z(~cK1%x3a55zY&KrB8Sj;QeO`|JOJe{Raq* zz=j3P1ia4r6eE1}u16pA4={AAq4XudBKkS5dSLVJ%^Lh;UL$THeIcZ7^N0|o>zoam zQhUnJ?Akpt_2n<0_a-6Se)38osaxQo`NiuQe`e~AxxR7ely=L?@LO5?hH;frzH8gV zQkjz%&v|VoIX`F6Xt1arm74+0)91t7FH6aYgNi^kW7~76AJyZ4y?!S#N_GL&V|X9R zu!x1vsq7ws({j7w$MJ*;_VOEp9^FCFU6i=c7+vScoPU5!~Q(3A0}-?Xu5%cf1e#Yu{s|$5+4U(ja06TsY4i-MbkzG z^a)_y`0x?xbf~#26wyUhaggbzsI{L|#IzuM_){5o7YXw&eDNY@iPeaq&aXU-YEqef zzzgt&fVW35{>Si$7m34=M~%#|zLPSYGL0qWl%mP=mRuZCcjXk&5x(yIlMxsTA#r1E z&Jgv`qf?OmE#)2}wsrWU3ZfRIS@w~Pc92?K5YkG0*(<{b z>cS+GAy)%myc|b)0TgwA`;#0;Gg}J*H%b#}&Lyww?CF?Wgy7xF4^o z(?EHS9pkLA`whmK3dyMKgR?PB+e7E~J@g+SAFhfcwl%SOABx+Gj+O>Nt*%Tv^+xJR zSoX)8d}?7pcryq{%XjB|Mci}yx;l~z-1tl;a$W_64MBbxfy$Uy7`67xSS6-1NN`xS zje(`F2ie&V1lcznj{nB`7cBURbB@n6Zf72x8LIK|-zTwovaqYYn`pK`p2c0mu7wU zD1^nQ_8ZNKqB0KR=pR@WQR>v1Wi;aBByM6_IkEd(yTbzkT8V^_=4KKyY)+obBw*|#3e+}wLbAld!u6RIp=uxD2oGOV?rozDW`z*u;g*hscVYcS zQB;222H__AfbQXnbw;g6qeYGO~21|jYRe=YFQ~!Bqzy7 zmCr)AKuxWQ0Sw-hRp;O9l{_L}>?4PRy)b%t^tZ~K2X+t9>xa%2||13cnNZ$^M~)g9+>O4DF|~#d5a(4aFF_9fZ%bl z+q3PAl!6&DH76ZimxG*_OQ=e5m%k0y#gJ|C@)``lzHD8G@ zKYNN)A+P;&Do+_68M*mO_&DpH`me7^GiZ}YnVUZJhJLuqQV&0egSu*xHXoUN6kKbi z+oRem6Y3J%0bx;AKgdymXrw!@$)8Bfx4M>@=jrdtwz8bgq~zUx-Nx>3&^9n~g7{wU zNbmp{;+}^T$Un^Q*aExn1x)3J{d6zC^m4vT)==K49LVqUTRc6E)``CN5}vH+k>}0x zK*$x&)%tIb@!;#QdDnK{O{x(suHEJYjv9lR6ewRzUl zHlNwm*plBOC_`r_g;c$`#f=la51`t$VPWx#Dy&2iog}&yIVnAy2`Fmmebwd*w#TI& zm3ZJ?mB5X!=eiXQV(gP}`lx$t9SYyRLC6mrdlwF~H+SsHJzY4*ue@^^TEi)r6FHG$ zGaW1)w%^y0>8%A*ESj%%DXCw!aLT zf}YtfvnTZKI$|2^+$P6-heS|IXwsw#+Gf3v*Qqn~;E0twy-%%^3qH4|#FH{8@j}yg zxF)i~B%-@7(MG6}x+mf_=zH%mz2l?+D$+?J%vMlTjWm)H=y7sxf@F*5S*_W2BBC3yLkZ>@UN!0_^7Np^u1+ zs=nZ!6!(?bimZUJQR+`-3aGtBcs-acziBv5QlJ!rZXt;>f*1gsmGhz3#ndBO?=NK zZ=1>WaqvtSKe6E?666Ds3oQV${>xD5OTEpI8!1rIL9Zr}(GbIsvzYA9y2@FKL?#ce zBnrOanGz|(^q>JB76CmdZSAi=dx7p!2}>-k^8)J1>W`o11TIacz;akLYCd+n5?$@= z7-?Rp!9PUD%NT>anz1V7I1B3>R>gfJx*8N6o!G@?v5m(ZU6RC^;WPE`!h$X0DqLH> z>jya?t^?6JUbe0B6>3x*U!neK!u8O>%WcS2ln;f6w+f|hva(^{{nHn6z!gH?TpCD! zy?u}qSdbCvUL;vJ-rVQcr?|*YQJ)j_=^c^Z(&~L|rI=Cg zewj9QcixfEmsgaR8;cJ+@auP11w*{#dcFcLgdv@m1KBpXBaPuZAzVco1f{=} z%dsrW{nN#14W>%^ikyV?(|q$=YySb%lenZH;$zS_6sj=_+7sbKDP0u{u$2gqwPOb# zX97{0rD)14H!-d!_nI#XcNfs)Z01U3Ie&ta`8_2m3^BS0UY%zkN&sb-dQrZD?E!>W zYYFQnV;%x?M!l!|J0PEL?dND~sqffRSfqKi8M0npDQ|iIRI0s%L}iWm*R&_1B|GXc zbDnn-3b-b?cLWExkmxEELR$EGmKs|OZ){ot$vcQV`#31+Mpaxna=2IR5 zv?8cFFpjhhHo_#gDpatiiaWp|3DOXXaZera?%JyH?9+e>ZK4IxakUG&VJ?TnBgo;CYC>a9D4!Z+e}rZP2hCRMUE+1*@SrC; zYK`b_pn89t+OC4yb0`ki>z9LW*aS(O=E{uf^9o18q~SN4=Y4l`K2^ltMd241*W5{8 z{a+TEv116%MO*})l%46Kz3#k}$}`I3ToxO$V9C(LznI|-9;ehEmM zG@FR(JGb%~&NfPx3Lq^pn-+SVz1O=*#07XjwSrpv=IMcaps z#=}lcnufv}e2h?$4C0ps{#*~&B_sHH{5avInD<4QbiA<9QJv9x+Mbu5YT)K+Co~3v zH&X!iq2D%{nlkVn7IJO#`~(@~n?E;ivQ_IEZ`^L?Xa9OOGuMHu|cu~<|ccsHh97_Spi0h7wv6*2oV^}W5;us+uKsq0?#fIIWPChw?3-UsUR z?pJb7cYIXD#_r)5w- zC1$B0^y5J^MPIpVjhO4D!Jmz+wV;=;8)^bYf5V+1;g~Cd%=o_$`!ObMo8=)B7guQo zI4c3>o-uM{-SjL;m$J;`io%1u3YAsrF%;n`@ud^bP1J-nf%m;5ZPjA0<4Gmsp9~l6 zt|v60RM;seV{OH++0NCR?}btMVh;LlIt61oNAu^u2?I#h4ggH; z=|T|1YHVJNE7cL=*k`u62ShQ~#VYGD-|3>?(A-;2lr#Up((#GUhR>ZTxc?sr-0HL( z$J&KEDV;(xFl{hYtG__oIJHl~S9Kt(sIQf|8Wqby&}_8mly|1 zK(A>niy!O3PUIwpC=+kCHMOYG7tPK|;i$iX?y`3(gm6D|Zu?_Oobx$eTG#KK)-HVM zIPY{;E;E;lAwhth9!zLDVD2``hV3d=05C_8y)l64zO_kL&D!t$!sQ!k zF>(Xj*Tk`sQVRUY`=E}@)HwC+;+w#Xz=2wNb6i_>!|yvyQ>!9wWIcETd`M$=&&2fY z{MVQ&?S5qo{0y1?&XnR69EQm+6hc7=UV*SU8KLV^UcF0nehP4K@TB6F+a_whE|+2} zo+GY!ff*s#I`TvOVt7_xK3295$)B7tyY=Seb!~EPQ>(zP&0(l)LM7+@h{O8Q;sri* zHEnnD+*JHBS#@e)3-x|>Xb7bZgTHdckgq*;EHm3oHHGcc6j>-&FK?Fzv*%T(b4Bxp z+)bspxcBJ^aUlXt{h^S`jf&z0;AgJ=*$!H6TqabPJ&IcqzoC-f=}#Yj-+tUw#@bgx z>YG{0!>DnyR4d82R{vfUiB-Y4`rt|yayq2I@s$a|(+IyUm<}|2HzRBx{J zKkY*gpTp76Cvi3ttTaQP9J3bJTzY(hNgKj(a)LbF( z5w+gY`RwGmBj3m%m>scqH@>kT@k7ht-2{Bj@slj^ZO|%2}M`#2gH!7*~7Vv?L~$YnTzsc0sLS$ zzPlq)Fnm4pneD*~r;}2-F24G>x`gUnrh?t3o2Lp}KrN^|MM{nv=6zC>?y#EL4cv$#lJ-{-_ z460h`xe*@)gjBBa;m44R-Da4aS#d`aw=iz_c-07nPbZN>L)M6K6M9cKv*y>U@2;{G`RBNr`jh0;?ve+WsT z9s0Y5=@6fPs!wqLL9m2H0&>sxwG%egCj3nY6c1b8Yv!iQ2!Fdm*UosI+kN z;(SocE&U<)Ev>ob;~E{8a}B%wYzUcd5(%Y7zk{+$7mG?4S7^3QtRb^pY+@D*Wb9NE zQC}<+V?R7jHn!yv*~y7RRrl}49pF~@b7J=D7{cTQDsApIvj?hpKH9CC?@wyR+)imQ zVi%;u)xW$6$G_M|4-x&nHSQ233%6))>QaSSpl)b#elv=j{CSq5c2(`KKNxZkWWepp zl_;FA?NV`p8qQQRN_+1(7{@jQ_t|v`k~&tlC;X4?yGqc+kJwNCWr(&^%IKRuk=&AS zyfI`o;N5(pVD@&!-8nohswp9QfabSacgveeG98X!lOL$oIN=>1vm{YlRUi2(YVoPB zV-xKDxLr?UgI%;Kf3|*^=5@eYM^}Ec227ASc{&d6;C-?mO7_Wc6wRvDu6XxSk6)A5 z8C=WUrFA!?PbO(99mPOm7C-6u=$Et;u-_4+q-fyI-+K&2qw8`cJ6tg9#M}3I9$8@% z*?H72mu~xMnHZ1&&=-FlVV2S0t9rbB3pH|js4Pu@12^SHfZ$?V0-q2v%j!=ZrSvtK zg0feZWVHs?DItG0?=%{@eE9gr0!g`-by; zp5aXD0D{_t_Q7$CGAv==AU**Xly*^B2jv*3U|$$hM)=m&S2eaZSyb2?4}2YP?nr*Dm>*^P*{K7D!UBl~a~+EAUBL4?u>G_YQRxvu z)wMe98xkQE@){=$_d(2S(qkV{Js-e5$R1rlpZose1QD1`D%mo`I6U z!~J%V@)w9x9P1rH=x&J%ke6B;&G&p#HF0S?nvyww% z#jH5=5M2aD&2I5(Pu3ZW@`m=I$FHE$V7B#6ViWRpCRbF@S3%s={cwWtKTwZTxso+v z>_vT=d1I5AOH!Ywh_!!L>@dj+x7H^&n2+czLVL{o60tq&*%)~#@0gnkaGl@`K!BPI zt<7qPgH=jHDYnLJmV=(GFRhGJt~Is15x1+0@xM(w#NRyR;LfoG5?eD9eqE`uf*}Y- z?xf;}R%A}h0g(==Iq9o0>w8`2ds|K|Pj1hM?bt9qO)+75ZJhh&%%a5nimg2)6%8S= zrs4!Y{xvH%?K@xCO3!_9>N#YOuyf4M_V^3DHg>MJeM1fvn2Z;S%T$*eiBt0k?Cf#Ja_Jrk32MkHIl!|3{WS|zZ52@ zldt255<|(?5BP2s&jr|R~*ZuvEf>hsPr?YF~&yO7xj5v}ar%9)B_&_qT2JywvAUa92O^P9Vo5 znQ2HM6+hFZTc3|@DUGNJds*L@XhuNNjNeRiV#qOBo-Q+&nNq8 zQ^JsL-Lt{IyLU_^JP)flxD)-9G?g^V=En&4`uklRzgqeYS){qDr*LYHJ)T3iVuhSP z=ThfoUP>=opH&rEvVZ|~G3Ads;kBA-LkUXClbcQ#*@fG82s&5`&lN=Z@;2-vguZTQ zD6ck5J$>wX!^8PO7%xI&eGoMGN?3=sjKVf_zO8n7teb&iiICBC0Az6t%bEheTIF2I z-?`Z3nsxjdxwX?t>Ot#$bRU7WD1QAx>xtAyU7J546S{*0vjpS3_a7wo_D|1rXs2vAsdKBvnh794KZ2@Zwo>)*S`Dh zNv?_Y-Q#wCkSW8Ahnh9xQ$HpyDKR|Ba`6h{H4-5I)JU+LlfYeadoVF}?{j=B|JOZ* zJ_tPw5QpB6HH}XZQ+&VDG<=U+uP(iA)J6kmoC~UD4v%BJ>GN7w_HwgMD2kJOKT!K1 zFF?97UQy2)=6xyV#2Bd%7dmS_tHII~|1i|^a7{%?*d}NBwVZw4g|m61;6u;#LLtG5 z8PplLjuRFx8mNi)HEy12<##C9a`y`+JK1x(YwU_4N-y1yy(Up&GW;h>P0!l)4{L)m zE$R8&U;)QdbVPKalWym79R0-B#7eIW0dcS=+VjyRiq$q^7p*9wVE|RAuYwMtfM}<7 zELQp6)~=Iy-xPi{$8~u9Nbi6{!#t_MO@BLr|JwGEH5^<9bZG-(ZQT~&6F=l{QIt!Z zGI7N#Ag$rONF}o|++O46XVD+3Uq|f>gt5`jL)v`q@xu6D@^u#A9D|5(sQ;vT$PwGk z1#J219(kKA&y$az>67p8oTq6sy(O@6xNmG`<10FTRQ8N{U4MvKi01BaNRQ1o?Gow; z7FZvY%WB*k157vVuJVyJSmfMVo zPJPW48Re#(!jAZXfYAn~vrE`Z#_^~x!k|@&gml#3B$`*2MyF~0q3*{!$r_k86gH<4 zLfwAPFO1C8c6o5oD@(jv@M)5E;_n|F1yC0s-5TyW>(HS034=C(@h=5X@LAvG(sw)#nP_?T7hx$4 zOTfSh-isuL6r=iUyOz9IFyRiQE9dIA&x{OEtn(HzwrAG1TSL#Q`cdH()Ng#g_s2(~ zUj9L4-SMIXMs0Grt~Qj*%*=S2-8%fTI<-(&NfA~E1fl{_AGn`|R?7`KQ`uA6cerY#H*7@+ldfj!GRA zJPwJcmuyuAFyI%fXN}P>PvjlDI3EQx0CL6X?v>SS+5@Uc8+>I4u>~C2jQHf955Ruc zMwSMSGiDBXjCCzmM4~tlYx=KPkC+}?Dhi%d6W9)%PCgTc@(EnM*>?$W_uNIl^~vrV zOOEoC+x!t3@9BWJm4?f_VLze5M~e~>{5GPGLT-fwz)kYQm-iJ~mpj&%mYX<+IyEx0 z&iDjm#U5_e%68NEi{7>ZG2B%+gKwQ#no0|c+QO98%Hp#ffGsG!ZQ9;e0(bGtc!~Vo zO5s>8&>-6OJ$+hW@-HPa0jmm=?K?STT-fy+ukRHYdr)=#{K`Mj)hY5gXAFs}nIKu> zNW=N3UcEQnH7}Ji3Fa&8pHkDKKE&tIa%*eWs`q)Z_Jl#$Nei9|k%3!VL&bRs*&evY z2e~Zg^4CqD)?DA;2NsqEw|I1BHU`S`oEKqV6}~z~y76k6HihSIMz3jbDt|?CK0$1< zJ0N^cKjl>Zd$M4EWBe8t0S;o4#Yk4;89MF5b=l=ndWgX9YI_hjX3NDCq!) zUHb;yMm`6Uk z*u&)HTh>Nih~Ib zDTk%G+PRe1CLujb^pFkW%YkJWtt`|1u59(QPvRjtXzSALC~Uy#EjYElaT_Qpkl5dho{E&P|Sjx3eb+^R|17FsIVOMjk+POqR(rYJw(cp`ZbTdm+0SkoO&HET=Y{b5Yf zzDShv884Hj6Wd;1%i62U12I^fd2*dMgw^ z*?7k~dECX~NfLfQRmE~1ZCPexXA=bsP_+6_F-3O>7jP!UDaqsKEbUo1?aT9K4Yi+# zTu1mmYrFPy%-w$h6r#l*TXDVpDa*1Z3Gd_wzCQo;WB`B02i}%Zm@VTN}rvK483N{M^QiC_XTq7vcAN_*=`Ii*l&y zxVrET_b@()mwY`Q4}RJhqXmyR7vFnnz?b50quk5+q)aJ_7u{C-7=IBNE~RB5qg7oC zgv0D9Tux@jhU}s^y$?|_mrFuAKp^2YmM8z4?fRe3AXnko!^P`=#iMdA<;MB6k+aGu z?#UWYaENl${sX}yr~oD%>IRH&(%D=qHR7v7@;36uR6&|H9e}>E(WKJsh}gYk&?aP73E%412CQp zzt&#S25RLt5u+|1;pRv^7kScN0#`Jotsfi$V0D|Va@g=`l8yuYx}Ag38Jp*opMr%% zxeA$n!|FM|5@y&PJDPB-2PRK%6wVZu^L6GnXmX?_2Rkb4v7fu^j(FGtX{n69nr4By zX0wp7>%vbORyn@OyN$wf`ojVCc}xN|D52M34OFP7rXqo`n+QKh>e;q&er#MwONH#N z(S5VQpq$>BU-3tqyE7nmXGDvV zm?d1!QgEll$dS{Kje}m0tEr!n?sVO}LO4-5$J*N?<O+OKuEIM(o~GUVl>4@3M#n-gLdFz6+fI`mUo{qp8VPcQw7|1JxNmwQi-&tU>3 zr;u-LHCADDygej4sOvbOZ{6rkEch(h+4@ibWA=kg?@qK9o7bt$k)qpLjOP;IXznIq~i+(66E=Xd4aB; z>P^sp`MN~F0O)*}-z%agwxP3hOhAsaU;nqR#!yOppwCC#_Sy;xv{%P|T%7&Z6g`Kk zvoka?E?`k#_(_$S^YZrvJ-l=20Eyah$FCpW9&u-g1~hT*+1&HHE)p^@_G@fTo{IgF`*_PD1_X*B{*E z!@_p7J)8Nzv@rm$2`N599((^7k)vQ>1ImKcNm)z_3tO(Y9 z?uUm|fg8w2(?h$GW@^(XBI|uy?zA@R81x?0Cl_vavstx+9*#xpXG`iHJ`Xtlfqc2o-7OfxEy1GM>wSya z)9zf!kF(#@WZH^Jj{0-kscatpzKTO?%VOx7hQ#Y1ove~s`Y^NRZ&Pdh4Tq#8Mf|HS za|MJ9UCP8!l2MWQ?>x=&tgTP?Psus#y(H_+(yE%d!|-@$j?C#vh%H$D#}p z6XoBkT90<6b!z%sl%H)GbN}Ty-rhH}yhF&6LOaYZH`+HCEq(6Ee-nFzpx3hDqfLrI zmig&Vud+|b&eeu{T=U`yqoO)^wTlQzhlM2e3EE%aSY***=Q#mloB$((p)S5|`|{zY z(U3k!jp8;>VS+_{gQ6R{MSL*4{Y6L%?E9G9=Fh&M&IA#i_7Yuq0eRvP z*sZQTucU6@8_CYuKU8_zHcfXJBqkM~)tm9Qe&BQVk;*s~_RM_HvE@GMe!Q(&0z}^S zEn?-TKNmXObY%J8dr?#Zm474<2FL`@$w=P!2&5nsuT`HlI1a`7Lf(_e$(teoDjjlB zB3@3ZOQIko-F~h6te&w?h0;q5S9Gk@wEN{3Si)@71|q|IYwY>hlpTVg&C)fDYGdk_ zx?N>%g)Qpb{-eUqu6QH35K6d<*|iRm|45*~{V{1#^w|QPpEX`M>Ccd_84=AEYIX^9 zE9;A4M@x>?8%ohm-{bq)zne28JUdC6{gx#z&}erj=cj^M(u`+TM{y?wjAOI2;A%rt zcwA3FTtB;R!e`y{y@c6=SqHEw@likd8UxYB`~chmz2V|~0q|-5xNnfp+gYjs)?XW@ zUh10S{)hAL`|$)VMOpYMuiCdjk(+F+Z&(t<*N`7$1ydtbH>mUTt*Dg3AE0Zro7nV> zCtmTrFCUKqgvbTJQ62j5$aJC>4nktIIVm9A!S5RaK2VvGP=HYx|E2A%6j7YFbvR#O z5ZDc~^Of!v-nc)+@%r)Tnx0AI&wk_j?CrsrrL#Qi&;krM+3Ov5!P8AVf2$L%Y2x!@ zWWEUJM&{}zAvvI!z}WwEx{~0tryyh#?y_#MV5;6IG+%xC*g!DkPk{S$d(}k_;B!8K z>o#`P@e`On9y-F)QuDX+Vc=SwlBGFEI-dtzf$obVH{+SFa@iROEdUBMRQHH)fSgZ+ zEF0Xh#4rIMhGw1B1P86@eMoItp7xurv%IfrhhOGlQsKd`Z5m_Uu6nqueIK&v6ht{R zotgMl7H{iYLiaw|v#k+ZLGA#mA82OdBxgu`(x4dCnIGR%e=6Y;Zg2I{W1!AvGu6=%vS7@P4%5IO` zG_aD`2k)dWmTEUk`7N-*zCLjFP=YW#cRnYf+Y7HT1=iy;g67)^aszUI1r-e-H}V4P zCi&LY>;(B=J_f*$^39jO9&Is2?cx&hY>g9F229Gw_OXR`gS(+wvyWx`Ug`$_35SKcK9_OGKxT;>$J z(Bl8vW&f`(-bkc~bRDl;y#n1W9lJ^}+&30q4{CQ2SklUx8x8ErsLl3F-zxe>kss^{ z?;J)|p8{;IcbHix)nS zQo39@Jvu%6A1wLt{2Qr7f10OL-R6W-PxK#~Q-m6M#A45l_)B`>xtpKacaZFR!Pb(^ z#UGFQ7HARjtJzNHfZGYnZGCuB$wlI8Pc!?Oq&@Y`(8|YE(9!r@i{??Q}=y9sUW!b^LG`TLsp!}uTH|>!Zi70FaiWBvg zCQjf82%Bkw?>IHT%y(Z^DKYtDq+Os8Ijhn-d;5h9t?6TCDtC5)LV`=7@!V$pw%d5A zn93sJ>@F&ApKyEcYqKwjX@7ZJ?9syFyTe%ctl=*F#B@wz(2yyy*w<&*8hbE`RHt#7 zI*p$tVqXOh!)s=MzUIh7b5(E8Wl`#xm(AG%_AyQ$WBo_NKe$9_uc?5-ZyV+5sroq- z{AWt||NGwKABcr~-A@LGio{I>x-3H(2(>R_bmSE*pgJ*!LKyai(z~CzC}RPp5m3}#5M9fkBy}3xUl68`C|AA#UpHGeQ<;!mV z8?iIv{TvZ(i?2q`+YH+&j>iDHLqo$PFuqOv^4u1y;Y`BzuXl#74UA=BYgO598qTL5 z-k^RADF}HHy(5-{mZO8W)V>?M$6pDC!#nSyu%F>HWDo(?3Fo*^()7pedKyny|2|eY zpsi' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 300 @@ -507,6 +514,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -593,12 +603,55 @@ #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -675,6 +728,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -725,6 +788,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -800,10 +864,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 5000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 // The number of probes to perform at each point. @@ -877,6 +941,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 2 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -915,9 +980,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1117,17 +1179,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1140,13 +1191,6 @@ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 @@ -1181,8 +1225,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1362,7 +1406,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1471,11 +1515,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1503,19 +1547,6 @@ */ #define DISPLAY_CHARSET_HD44780 WESTERN -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1542,6 +1573,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1607,12 +1647,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1630,40 +1676,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1672,28 +1684,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1701,39 +1691,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1780,6 +1759,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1800,25 +1856,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1834,6 +1876,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1849,6 +1898,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1908,7 +1985,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1973,9 +2050,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h index 2d2f2fe87f..d63294ac48 100644 --- a/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/auto_calibrate/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h index 7775ccbfbd..30046380ae 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 300 @@ -507,6 +514,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -593,12 +603,55 @@ #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -675,6 +728,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -725,6 +788,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -800,10 +864,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 5000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST) / 6 // The number of probes to perform at each point. @@ -838,8 +902,7 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED @@ -877,6 +940,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 2 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 2 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -915,9 +979,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1163,8 +1224,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1344,7 +1405,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1453,11 +1514,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1485,19 +1546,6 @@ */ #define DISPLAY_CHARSET_HD44780 WESTERN -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1524,6 +1572,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1589,12 +1646,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1612,40 +1675,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1654,28 +1683,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1683,39 +1690,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1762,6 +1758,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1782,25 +1855,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1816,6 +1875,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1831,6 +1897,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1890,7 +1984,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1955,9 +2049,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h index 0371e86d49..420ed57210 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h index 2c8161af83..eb268b6e1c 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -447,15 +449,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 175 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 300 @@ -507,6 +514,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -595,10 +605,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -675,6 +728,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -725,6 +788,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -800,10 +864,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 2000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -838,8 +902,7 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED @@ -877,6 +940,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -915,9 +979,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1086,6 +1147,7 @@ #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) // Set the number of grid points per dimension. + // Works best with 5 or more points in each dimension. #define GRID_MAX_POINTS_X 9 #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X @@ -1162,8 +1224,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1343,7 +1405,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1452,11 +1514,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1484,19 +1546,6 @@ */ #define DISPLAY_CHARSET_HD44780 WESTERN -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1523,6 +1572,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1587,12 +1645,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1610,40 +1674,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1652,28 +1682,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1681,39 +1689,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1760,6 +1757,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1780,25 +1854,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1814,6 +1874,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1829,6 +1896,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1888,7 +1983,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1953,9 +2048,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h index 58867486dc..19376d9808 100644 --- a/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/FLSUN/kossel_mini/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h index 17d2551298..9dade8f359 100644 --- a/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h +++ b/Marlin/example_configurations/delta/Hatchbox_Alpha/Configuration.h @@ -42,7 +42,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -92,7 +92,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -206,11 +206,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -264,6 +264,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -273,6 +274,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -304,7 +306,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -452,15 +454,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -512,6 +519,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 200 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -600,10 +610,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -680,6 +733,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -730,6 +793,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -805,10 +869,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST (HOMING_FEEDRATE_Z / 4) -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 4) // The number of probes to perform at each point. @@ -879,6 +943,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -917,9 +982,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1119,17 +1181,6 @@ #endif -#elif ENABLED(AUTO_BED_LEVELING_3POINT) - - // 3 arbitrary points to probe. - // A simple cross-product is used to estimate the plane of the bed. - #define PROBE_PT_1_X -116 - #define PROBE_PT_1_Y -67.5 - #define PROBE_PT_2_X 116 - #define PROBE_PT_2_Y -67.5 - #define PROBE_PT_3_X 0 - #define PROBE_PT_3_Y 135 - #elif ENABLED(AUTO_BED_LEVELING_UBL) //=========================================================================== @@ -1167,17 +1218,17 @@ * Override if the automatically selected points are inadequate. */ #if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X -116 + #define PROBE_PT_1_Y -67.5 + #define PROBE_PT_2_X 116 + #define PROBE_PT_2_Y -67.5 + #define PROBE_PT_3_X 0 + #define PROBE_PT_3_Y 135 #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1357,7 +1408,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1466,11 +1517,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1498,19 +1549,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1537,6 +1575,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1601,12 +1648,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1624,40 +1677,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1666,28 +1685,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1695,39 +1692,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1774,6 +1760,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1794,25 +1857,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1828,6 +1877,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1843,6 +1899,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1902,7 +1986,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1967,9 +2051,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration.h b/Marlin/example_configurations/delta/generic/Configuration.h index b4d8bc79b8..cdd3e713fe 100644 --- a/Marlin/example_configurations/delta/generic/Configuration.h +++ b/Marlin/example_configurations/delta/generic/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 -1 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -497,6 +504,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 200 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -585,10 +595,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -665,6 +718,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -715,6 +778,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -790,10 +854,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -864,6 +928,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -902,9 +967,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1150,8 +1212,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1331,7 +1393,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1440,11 +1502,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1472,19 +1534,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1511,6 +1560,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1575,12 +1633,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1598,40 +1662,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1640,28 +1670,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1669,39 +1677,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1748,6 +1745,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1768,25 +1842,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1802,6 +1862,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1817,6 +1884,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1876,7 +1971,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1941,9 +2036,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/generic/Configuration_adv.h b/Marlin/example_configurations/delta/generic/Configuration_adv.h index 58867486dc..19376d9808 100644 --- a/Marlin/example_configurations/delta/generic/Configuration_adv.h +++ b/Marlin/example_configurations/delta/generic/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration.h b/Marlin/example_configurations/delta/kossel_mini/Configuration.h index f8274283ed..6e29ccb9c4 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 7 #define TEMP_SENSOR_1 0 @@ -437,15 +439,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -497,6 +504,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 200 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -585,10 +595,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -665,6 +718,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -715,6 +778,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -790,10 +854,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 4000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -828,8 +892,7 @@ #define Z_PROBE_ALLEN_KEY_DEPLOY_3_FEEDRATE XY_PROBE_SPEED #define Z_PROBE_ALLEN_KEY_STOW_DEPTH 20 - // Move the probe into position - #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 + #define Z_PROBE_ALLEN_KEY_STOW_1_X -64.0 // Move the probe into position #define Z_PROBE_ALLEN_KEY_STOW_1_Y 56.0 #define Z_PROBE_ALLEN_KEY_STOW_1_Z 23.0 #define Z_PROBE_ALLEN_KEY_STOW_1_FEEDRATE XY_PROBE_SPEED @@ -867,6 +930,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 50 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -905,9 +969,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1153,8 +1214,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1334,7 +1395,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1443,11 +1504,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1475,19 +1536,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1514,6 +1562,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1578,12 +1635,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1601,40 +1664,6 @@ // #define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1643,28 +1672,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1672,39 +1679,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1751,6 +1747,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1771,25 +1844,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1805,6 +1864,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1820,6 +1886,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1879,7 +1973,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1944,9 +2038,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h index 58867486dc..19376d9808 100644 --- a/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_mini/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration.h b/Marlin/example_configurations/delta/kossel_pro/Configuration.h index bfa1eb558a..c9874d0d71 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration.h @@ -41,7 +41,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -91,7 +91,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -205,11 +205,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -263,6 +263,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -272,6 +273,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -303,7 +305,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -423,15 +425,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -483,6 +490,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -571,15 +581,66 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= // @section motion +#define XYZ_FULL_STEPS_PER_ROTATION 200 +#define XYZ_MICROSTEPS 32 +#define XYZ_BELT_PITCH 2 +#define XYZ_PULLEY_TEETH 20 + +// delta speeds must be the same on xyz +#define XYZ_STEPS ((XYZ_FULL_STEPS_PER_ROTATION) * (XYZ_MICROSTEPS) / double(XYZ_BELT_PITCH) / double(XYZ_PULLEY_TEETH)) + /** * Default Settings * @@ -650,6 +711,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -700,6 +771,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -778,10 +850,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -858,11 +930,13 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 100 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset + #define Z_PROBE_OFFSET_RANGE_MIN -15 #define Z_PROBE_OFFSET_RANGE_MAX 5 @@ -896,9 +970,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1144,8 +1215,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1325,7 +1396,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1434,11 +1505,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1466,19 +1537,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1505,6 +1563,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1569,12 +1636,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1592,40 +1665,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1634,28 +1673,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1663,39 +1680,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1742,6 +1748,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1762,25 +1845,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1796,6 +1865,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1811,6 +1887,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1870,7 +1974,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1935,9 +2039,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h index a3bc22677f..5a2aeec8e8 100644 --- a/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_pro/Configuration_adv.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -187,10 +187,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -211,10 +213,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -324,15 +336,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -436,8 +453,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -500,9 +533,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -571,6 +601,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -789,10 +823,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -960,23 +1030,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1027,34 +1086,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1062,22 +1103,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1225,32 +1251,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1602,27 +1615,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1640,4 +1655,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration.h b/Marlin/example_configurations/delta/kossel_xl/Configuration.h index d37868e373..e59459e0cc 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -441,15 +443,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -501,6 +508,9 @@ // and processor overload (too many expensive sqrt calls). #define DELTA_SEGMENTS_PER_SECOND 160 + // Convert feedrates to apply to the Effector instead of the Carriages + #define DELTA_FEEDRATE_SCALING + // After homing move down to a height where XY movement is unconstrained //#define DELTA_HOME_TO_SAFE_ZONE @@ -589,10 +599,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -668,6 +721,16 @@ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta #define DEFAULT_EJERK 20.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -718,6 +781,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -793,10 +857,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -867,6 +931,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 20 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 10 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 10 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -905,9 +970,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1153,8 +1215,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1334,7 +1396,7 @@ #if ENABLED(NOZZLE_PARK_FEATURE) // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), 0, 20 } #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif @@ -1443,11 +1505,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1475,19 +1537,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1514,6 +1563,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1578,12 +1636,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1601,40 +1665,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1643,28 +1673,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1672,39 +1680,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1751,6 +1748,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1771,25 +1845,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1805,6 +1865,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1820,6 +1887,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1879,7 +1974,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1944,9 +2039,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h index 01fd89753d..5bee3c391e 100644 --- a/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h +++ b/Marlin/example_configurations/delta/kossel_xl/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -431,8 +448,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -495,9 +528,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -566,6 +596,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -784,10 +818,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -955,23 +1025,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1022,34 +1081,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1098,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1246,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1610,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1650,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h index 0b9542cb2a..259033856d 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -206,11 +206,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -264,6 +264,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -273,6 +274,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -304,7 +306,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -450,15 +452,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -535,10 +542,53 @@ #define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. #define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -606,6 +656,16 @@ #define DEFAULT_ZJERK 0.7 #define DEFAULT_EJERK 4.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -656,6 +716,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -731,10 +792,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 7500 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -758,6 +819,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 6 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 6 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -796,9 +858,6 @@ #define INVERT_Y_DIR true #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1010,13 +1069,6 @@ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #define PROBE_PT_1_X 53 // Probing points for 3-Point leveling of the mesh - #define PROBE_PT_1_Y 323 - #define PROBE_PT_2_X 53 - #define PROBE_PT_2_Y 63 - #define PROBE_PT_3_X 348 - #define PROBE_PT_3_Y 211 - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 @@ -1042,17 +1094,17 @@ * Override if the automatically selected points are inadequate. */ #if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + #define PROBE_PT_1_X 53 + #define PROBE_PT_1_Y 323 + #define PROBE_PT_2_X 53 + #define PROBE_PT_2_Y 63 + #define PROBE_PT_3_X 348 + #define PROBE_PT_3_Y 211 #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1342,11 +1394,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1374,19 +1426,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1413,6 +1452,15 @@ */ #define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1477,12 +1525,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1500,40 +1554,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1542,28 +1562,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1571,39 +1569,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1650,6 +1637,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1670,25 +1734,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1704,6 +1754,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1719,6 +1776,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1778,7 +1863,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1843,9 +1928,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300, 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h index 03f40bb293..2735f6ef7b 100644 --- a/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h +++ b/Marlin/example_configurations/gCreate/gMax1.5+/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ #define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE -90 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/hangprinter/Configuration.h b/Marlin/example_configurations/hangprinter/Configuration.h new file mode 100644 index 0000000000..4e320298f7 --- /dev/null +++ b/Marlin/example_configurations/hangprinter/Configuration.h @@ -0,0 +1,2094 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration.h + * + * Basic settings such as: + * + * - Type of electronics + * - Type of temperature sensor + * - Printer geometry + * - Endstop configuration + * - LCD controller + * - Extra features + * + * Advanced settings can be found in Configuration_adv.h + * + */ +#ifndef CONFIGURATION_H +#define CONFIGURATION_H +#define CONFIGURATION_H_VERSION 010109 + +//=========================================================================== +//============================= Getting Started ============================= +//=========================================================================== + +/** + * Here are some standard links for getting your machine calibrated: + * + * http://reprap.org/wiki/Calibration + * http://youtu.be/wAL9d7FgInk + * http://calculator.josefprusa.cz + * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide + * http://www.thingiverse.com/thing:5573 + * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap + * http://www.thingiverse.com/thing:298812 + */ + +//=========================================================================== +//============================= DELTA Printer =============================== +//=========================================================================== +// For a Delta printer start with one of the configuration files in the +// example_configurations/delta directory and customize for your machine. +// + +//=========================================================================== +//============================= SCARA Printer =============================== +//=========================================================================== +// For a SCARA printer start with the configuration files in +// example_configurations/SCARA and customize for your machine. +// + +//=========================================================================== +//============================= HANGPRINTER ================================= +//=========================================================================== +// For a Hangprinter start with the configuration file in the +// example_configurations/hangprinter directory and customize for your machine. +// + +// @section info + +// User-specified version info of this build to display in [Pronterface, etc] terminal window during +// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this +// build by the user have been successfully uploaded into firmware. +#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define SHOW_BOOTSCREEN +#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 +#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 + +/** + * *** VENDORS PLEASE READ *** + * + * Marlin allows you to add a custom boot image for Graphical LCDs. + * With this option Marlin will first show your custom screen followed + * by the standard Marlin logo with version number and web URL. + * + * We encourage you to take advantage of this new feature and we also + * respectfully request that you retain the unmodified Marlin boot screen. + */ + +// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. +//#define SHOW_CUSTOM_BOOTSCREEN + +// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. +//#define CUSTOM_STATUS_SCREEN_IMAGE + +// @section machine + +/** + * Select the serial port on the board to use for communication with the host. + * This allows the connection of wireless adapters (for instance) to non-default port pins. + * Serial port 0 is always used by the Arduino bootloader regardless of this setting. + * + * :[0, 1, 2, 3, 4, 5, 6, 7] + */ +#define SERIAL_PORT 0 + +/** + * This setting determines the communication speed of the printer. + * + * 250000 works in most cases, but you might try a lower speed if + * you commonly experience drop-outs during host printing. + * You may try up to 1000000 to speed up SD file transfer. + * + * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] + */ +#define BAUDRATE 250000 + +// Enable the Bluetooth serial interface on AT90USB devices +//#define BLUETOOTH + +// The following define selects which electronics board you have. +// Please choose the name from boards.h that matches your setup +#ifndef MOTHERBOARD + #define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif + +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message +#define CUSTOM_MACHINE_NAME "Hangprinter" + +// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines) +// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4) +//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000" + +// @section extruder + +// This defines the number of extruders +// With Hangprinter, max number of extruders is 4 +// :[1, 2, 3, 4, 5] +#define EXTRUDERS 1 + +// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 + +// For Cyclops or any "multi-extruder" that shares a single nozzle. +//#define SINGLENOZZLE + +/** + * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants. + * + * This device allows one stepper driver on a control board to drive + * two to eight stepper motors, one at a time, in a manner suitable + * for extruders. + * + * This option only allows the multiplexer to switch on tool-change. + * Additional options to configure custom E moves are pending. + */ +//#define MK2_MULTIPLEXER +#if ENABLED(MK2_MULTIPLEXER) + // Override the default DIO selector pins here, if needed. + // Some pins files may provide defaults for these pins. + //#define E_MUX0_PIN 40 // Always Required + //#define E_MUX1_PIN 42 // Needed for 3 to 8 steppers + //#define E_MUX2_PIN 44 // Needed for 5 to 8 steppers +#endif + +// A dual extruder that uses a single stepper motor +//#define SWITCHING_EXTRUDER +#if ENABLED(SWITCHING_EXTRUDER) + #define SWITCHING_EXTRUDER_SERVO_NR 0 + #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3] + #if EXTRUDERS > 3 + #define SWITCHING_EXTRUDER_E23_SERVO_NR 1 + #endif +#endif + +// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles +//#define SWITCHING_NOZZLE +#if ENABLED(SWITCHING_NOZZLE) + #define SWITCHING_NOZZLE_SERVO_NR 0 + #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1 + //#define HOTEND_OFFSET_Z { 0.0, 0.0 } +#endif + +/** + * Two separate X-carriages with extruders that connect to a moving part + * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN. + */ +//#define PARKING_EXTRUDER +#if ENABLED(PARKING_EXTRUDER) + #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage + #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil + #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined. + #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders + #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // mm to move beyond the parking point to grab the extruder + #define PARKING_EXTRUDER_SECURITY_RAISE 5 // Z-raise before parking + #define HOTEND_OFFSET_Z { 0.0, 1.3 } // Z-offsets of the two hotends. The first must be 0. +#endif + +/** + * "Mixing Extruder" + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. + * - Extends the stepping routines to move multiple steppers in proportion to the mix. + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). + */ +//#define MIXING_EXTRUDER +#if ENABLED(MIXING_EXTRUDER) + #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder + #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164 + //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands +#endif + +// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing). +// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder). +// For the other hotends it is their distance from the extruder 0 hotend. +//#define HOTEND_OFFSET_X {0.0, 20.00} // (in mm) for each extruder, offset of the hotend on the X axis +//#define HOTEND_OFFSET_Y {0.0, 5.00} // (in mm) for each extruder, offset of the hotend on the Y axis + +// @section machine + +/** + * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN + * + * 0 = No Power Switch + * 1 = ATX + * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC) + * + * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' } + */ +#define POWER_SUPPLY 1 + +#if POWER_SUPPLY > 0 + // Enable this option to leave the PSU off at startup. + // Power to steppers and heaters will need to be turned on with M80. + //#define PS_DEFAULT_OFF + + //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin + #if ENABLED(AUTO_POWER_CONTROL) + #define AUTO_POWER_FANS // Turn on PSU if fans need power + #define AUTO_POWER_E_FANS + #define AUTO_POWER_CONTROLLERFAN + #define POWER_TIMEOUT 30 + #endif + +#endif + +// @section temperature + +//=========================================================================== +//============================= Thermal Settings ============================ +//=========================================================================== + +/** + * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table + * + * Temperature sensors available: + * + * -4 : thermocouple with AD8495 + * -3 : thermocouple with MAX31855 (only for sensor 0) + * -2 : thermocouple with MAX6675 (only for sensor 0) + * -1 : thermocouple with AD595 + * 0 : not used + * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup) + * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup) + * 3 : Mendel-parts thermistor (4.7k pullup) + * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! + * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor + * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) + * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) + * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) + * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) + * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup) + * 10 : 100k RS thermistor 198-961 (4.7k pullup) + * 11 : 100k beta 3950 1% thermistor (4.7k pullup) + * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed) + * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE" + * 15 : 100k thermistor calibration for JGAurora A5 hotend + * 20 : the PT100 circuit found in the Ultimainboard V2.x + * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950 + * 66 : 4.7M High Temperature thermistor from Dyze Design + * 70 : the 100K thermistor found in the bq Hephestos 2 + * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor + * + * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k. + * (but gives greater accuracy and more stable PID) + * 51 : 100k thermistor - EPCOS (1k pullup) + * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup) + * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup) + * + * 1047 : Pt1000 with 4k7 pullup + * 1010 : Pt1000 with 1k pullup (non standard) + * 147 : Pt100 with 4k7 pullup + * 110 : Pt100 with 1k pullup (non standard) + * + * Use these for Testing or Development purposes. NEVER for production machine. + * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. + * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. + * + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + */ +#define TEMP_SENSOR_0 5 // Setting gotten from wiki.e3d-online.net instructions for V6 hot end +#define TEMP_SENSOR_1 0 +#define TEMP_SENSOR_2 0 +#define TEMP_SENSOR_3 0 +#define TEMP_SENSOR_4 0 +#define TEMP_SENSOR_BED 0 +#define TEMP_SENSOR_CHAMBER 0 + +// Dummy thermistor constant temperature readings, for use with 998 and 999 +#define DUMMY_THERMISTOR_998_VALUE 25 +#define DUMMY_THERMISTOR_999_VALUE 100 + +// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings +// from the two sensors differ too much the print will be aborted. +//#define TEMP_SENSOR_1_AS_REDUNDANT +#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10 + +// Extruder temperature must be close to target for this long before M109 returns success +#define TEMP_RESIDENCY_TIME 10 // (seconds) +#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// Bed temperature must be close to target for this long before M190 returns success +#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) +#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one +#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early. + +// The minimal temperature defines the temperature below which the heater will not be enabled It is used +// to check that the wiring to the thermistor is not broken. +// Otherwise this would lead to the heater being powered on all the time. +#define HEATER_0_MINTEMP 5 +#define HEATER_1_MINTEMP 5 +#define HEATER_2_MINTEMP 5 +#define HEATER_3_MINTEMP 5 +#define HEATER_4_MINTEMP 5 +#define BED_MINTEMP 5 + +// When temperature exceeds max temp, your heater will be switched off. +// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! +// You should use MINTEMP for thermistor short/failure protection. +#define HEATER_0_MAXTEMP 275 +#define HEATER_1_MAXTEMP 275 +#define HEATER_2_MAXTEMP 275 +#define HEATER_3_MAXTEMP 275 +#define HEATER_4_MAXTEMP 275 +#define BED_MAXTEMP 150 + +//=========================================================================== +//============================= PID Settings ================================ +//=========================================================================== +// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning + +// Comment the following line to disable PID and enable bang-bang. +#define PIDTEMP +#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current +#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current +#define PID_K1 0.95 // Smoothing factor within any PID loop +#if ENABLED(PIDTEMP) + //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. + //#define PID_DEBUG // Sends debug data to the serial port. + //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX + //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay + //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) + // Set/get with gcode: M301 E[extruder number, 0-2] + #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature + // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. + + // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it + + // Hangprinter (Volcano, e3d V6, RAMPS, 120W power supply) + #define DEFAULT_Kp 39.76 + #define DEFAULT_Ki 3.26 + #define DEFAULT_Kd 121.18 + + // Ultimaker + //#define DEFAULT_Kp 22.2 + //#define DEFAULT_Ki 1.08 + //#define DEFAULT_Kd 114 + + // MakerGear + //#define DEFAULT_Kp 7.0 + //#define DEFAULT_Ki 0.1 + //#define DEFAULT_Kd 12 + + // Mendel Parts V9 on 12V + //#define DEFAULT_Kp 63.0 + //#define DEFAULT_Ki 2.25 + //#define DEFAULT_Kd 440 + +#endif // PIDTEMP + +//=========================================================================== +//============================= PID > Bed Temperature Control =============== +//=========================================================================== + +/** + * PID Bed Heating + * + * If this option is enabled set PID constants below. + * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis. + * + * The PID frequency will be the same as the extruder PWM. + * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz, + * which is fine for driving a square wave into a resistive load and does not significantly + * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W + * heater. If your configuration is significantly different than this and you don't understand + * the issues involved, don't use bed PID until someone else verifies that your hardware works. + */ +//#define PIDTEMPBED + +//#define BED_LIMIT_SWITCHING + +/** + * Max Bed Power + * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis). + * When set to any value below 255, enables a form of PWM to the bed that acts like a divider + * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED) + */ +#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current + +#if ENABLED(PIDTEMPBED) + + //#define PID_BED_DEBUG // Sends debug data to the serial port. + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) + #define DEFAULT_bedKp 10.00 + #define DEFAULT_bedKi .023 + #define DEFAULT_bedKd 305.4 + + //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) + //from pidautotune + //#define DEFAULT_bedKp 97.1 + //#define DEFAULT_bedKi 1.41 + //#define DEFAULT_bedKd 1675.16 + + // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +#endif // PIDTEMPBED + +// @section extruder + +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ +#define PREVENT_COLD_EXTRUSION +#define EXTRUDE_MINTEMP 170 + +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ +#define PREVENT_LENGTHY_EXTRUDE +#define EXTRUDE_MAXLENGTH 200 + +//=========================================================================== +//======================== Thermal Runaway Protection ======================= +//=========================================================================== + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * If you get "Thermal Runaway" or "Heating failed" errors the + * details can be tuned in Configuration_adv.h + */ + +#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders +#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed + +//=========================================================================== +//============================= Mechanical Settings ========================= +//=========================================================================== + +// @section machine + +// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics +// either in the usual order or reversed +//#define COREXY +//#define COREXZ +//#define COREYZ +//#define COREYX +//#define COREZX +//#define COREZY + +//=========================================================================== +//============================== Hangprinter Settings ======================= +//=========================================================================== + +// This value is used whether LINE_BUILDUP_COMPENSATION_FEATURE is enabled or not. +#define DEFAULT_E_AXIS_STEPS_PER_UNIT 410.0 // 410.0 set quite at random + +// Enable HANGPRINTER kinematics and most of the default configuration for Hangprinters +#define HANGPRINTER +#if ENABLED(HANGPRINTER) + #define KINEMATIC_SEGMENTS_PER_SECOND 40 + #define HANGPRINTER_PRINTABLE_RADIUS 1500.0 + // Anchor position coordinates + // ANCHOR_A_X = 0 by definition. Left out of all calculations + #define ANCHOR_A_Y -1234 + #define ANCHOR_A_Z -12 + #define ANCHOR_B_X 1234 + #define ANCHOR_B_Y 123 + #define ANCHOR_B_Z -12 + #define ANCHOR_C_X -1234 + #define ANCHOR_C_Y 1234 + #define ANCHOR_C_Z -12 + #define ANCHOR_D_Z 1234 + + // Disable this if you plan to place your anchors at unconventional places + // See SanityCheck.h for exact definition of the tested convention + // Warning: For this to work, don't use decimal points in the ANCHOR_ABCD_XYZ definitions. + #define CONVENTIONAL_GEOMETRY + + /** + * Line buildup compensation feature + * For documentation of theory behind, see: + * https://vitana.se/opr3d/tbear/2017.html#hangprinter_project_29 + * + * Lets you use more info about your lines and spools to improve accuracy and print volume. + * The amount of D-compensation at 3 m height is ~75 mm for a 0.5 mm line setup. + * + * If you plan on printing > 2 m you should definitely enable this + * and check that your motors wind/unwind close to exact amounts. + * + * Check by putting your printer in home position and wind/unwind using + * G6 S2 A2000 + * Note that this requires UNREGISTERED_MOVE_SUPPORT, + * and that your printer will be confused about where it is after a G6 move + */ + #define LINE_BUILDUP_COMPENSATION_FEATURE + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + // Allows gearing down with pulley principle + #define MECHANICAL_ADVANTAGE { 1, 1, 1, 1 } + + // The point where line meets mover is called action point + #define ACTION_POINTS { 2, 2, 2, 3 } + + /** + * Naive buildup factor calculation (assumes cylindrical, straight line) + * line diameter: 0.5 mm + * spool height: 8.0 mm + * (line_cross_section_area)/(height*pi): ((0.5/2)*(0.5/2)*pi)/(8.0*pi) = 0.0078 mm + * + * Default buildup factor for 0.50 mm FireLine: 0.0078 + * Default buildup factor for 0.39 mm FireLine: 0.00475 + * In practice you might want to compensate a bit more or a bit less + */ + #define SPOOL_BUILDUP_FACTOR 0.0078 + + /** + * Total length of lines on each spool + * Default assumes all nine lines are cut to length 7500 mm. + * Change to whatever length you have cut your different lines to. + */ + #define MOUNTED_LINE { 7500.0, 7500.0, 7500.0, 4000.0 } + + // Measuring your spool radii and adjusting this number will improve your Hangprinter's precision + #define SPOOL_RADII { 55.0, 55.0, 55.0, 55.0 } + + // Used for calculating steps per spool radian and the static steps per mm used in acceleration planning + #define MOTOR_GEAR_TEETH { 10, 10, 10, 10 } + #define SPOOL_GEAR_TEETH { 100, 100, 100, 100 } + + #endif // LINE_BUILDUP_COMPENSATION_FEATURE +#endif // HANGPRINTER + +// Activate G6: Direct Stepper Move +// Super useful when Hangprinting +#define UNREGISTERED_MOVE_SUPPORT + +/** + * == Torque mode: G95 [ A B C D ] == + * Sets your Mechaduino-driven and i2c-connected Mechaduino in torque mode. + * Parameters: A, B, C, and D, each with argument +-[1-254] for specifying magnitude of torque. + * The argument 0 is special and places motor back into position mode. + * + * Changing the sign of the argument changes the torque direction. + * A positive sign or no sign should tigthen line by winding line inwards, onto the spool. + * + * If several motors are simultaneously in torque mode, the mover can be pushed around by hand. + * This is useful when homing manually (placing nozzle in origin and tightening lines). + * + * Try for example: + * G95 A40 B40 C40 D30 + * Now push mover until nozzle is in origo. + * Then go back to position mode: + * G95 A0 B0 C0 D0 + * Re-establish correct G0/G1-moves + * G92 X0 Y0 Z0 + * + * Your Hangprinter will be confused about where it is during/after G95. + * This is the reason for the G92 in the above example. + * + * == Mark reference point: G96 [ A B C D ] == + * Tells the Mechaduino to read it's encoder value and remember it. + * This encoder position will be used as reference point when issuing M114 S1 later. + * If one or several of [ A B C D ] parameters are issued, then only those axes get their reference points marked. + * + * == Get line length from encoder: M114 S1 == + * Asks all Mechaduinos how much encoders have rotated since the last G96. + * Uses that data to calculate how much line has been wound in or out. + * Takes line buildup into account if LINE_BUILDUP_COMPENSATION_FEATURE is enabled, + * but the compensation will be imperfect if configured anchor positions are imperfect + * or if the machine was not at the origin with tight lines when the previous G96 was issued. + */ +#define MECHADUINO_I2C_COMMANDS + +//=========================================================================== +//============================== Endstop Settings =========================== +//=========================================================================== + +// @section homing + +// Specify here all the endstop connectors that are connected to any endstop or probe. +// Almost all printers will be using one per axis. Probes will use one or more of the +// extra connectors. Leave undefined any used for non-endstop and non-probe purposes. +//#define USE_XMIN_PLUG +//#define USE_YMIN_PLUG +//#define USE_ZMIN_PLUG // a Z probe +//#define USE_XMAX_PLUG +//#define USE_YMAX_PLUG +//#define USE_ZMAX_PLUG + +// Enable pullup for all endstops to prevent a floating state +#define ENDSTOPPULLUPS +#if DISABLED(ENDSTOPPULLUPS) + // Disable ENDSTOPPULLUPS to set pullups individually + //#define ENDSTOPPULLUP_XMAX + //#define ENDSTOPPULLUP_YMAX + //#define ENDSTOPPULLUP_ZMAX + //#define ENDSTOPPULLUP_XMIN + //#define ENDSTOPPULLUP_YMIN + //#define ENDSTOPPULLUP_ZMIN + //#define ENDSTOPPULLUP_ZMIN_PROBE +#endif + +// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. + +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + +// Enable this feature if all enabled endstop pins are interrupt-capable. +// This will remove the need to poll the interrupt pins, saving many CPU cycles. +//#define ENDSTOP_INTERRUPTS_FEATURE + +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + +//============================================================================= +//============================== Movement Settings ============================ +//============================================================================= +// @section motion + +/** + * Default Settings + * + * These settings can be reset by M502 + * + * Note that if EEPROM is enabled, saved values will override these. + */ + +/** + * With this option each E stepper can have its own factors for the + * following movement settings. If fewer factors are given than the + * total number of extruders, the last value applies to the rest. + */ +//#define DISTINCT_E_FACTORS + +/** + * Default Axis Steps Per Unit (steps/mm) + * Override with M92 + * LINE_BUILDUP_COMPENSATION_FEATURE overrides ABCD values + * A B C D + */ +#define DEFAULT_AXIS_STEPS_PER_UNIT { 92.599, 92.599, 92.599, 92.599, DEFAULT_E_AXIS_STEPS_PER_UNIT } + +/** + * Default Max Feed Rate (mm/s) + * Override with M203 + * A B C D E + */ +#define DEFAULT_MAX_FEEDRATE { 500, 500, 500, 300, 25 } + +/** + * Default Max Acceleration (change/s) change = mm/s + * (Maximum start speed for accelerated moves) + * Override with M201 + * A B C D E + */ +#define DEFAULT_MAX_ACCELERATION { 1000, 1000, 1000, 1000, 10000 } + +/** + * Default Acceleration (change/s) change = mm/s + * Override with M204 + * + * M204 P Acceleration + * M204 R Retract Acceleration + * M204 T Travel Acceleration + */ +#define DEFAULT_ACCELERATION 900 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 900 // X, Y, Z acceleration for travel (non printing) moves + +/** + * Default Jerk (mm/s) + * Override with M205 X Y Z E + * + * "Jerk" specifies the minimum speed change that requires acceleration. + * When changing speed and direction, if the difference is less than the + * value set here, it may happen instantaneously. + */ +#define DEFAULT_AJERK 13.0 +#define DEFAULT_BJERK 13.0 +#define DEFAULT_CJERK 13.0 +#define DEFAULT_DJERK 13.0 +#define DEFAULT_EJERK 5.0 + +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + +//=========================================================================== +//============================= Z Probe Options ============================= +//=========================================================================== +// @section probes + +// +// See http://marlinfw.org/docs/configuration/probes.html +// + +/** + * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + * + * Enable this option for a probe connected to the Z Min endstop pin. + */ +#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + +/** + * Z_MIN_PROBE_ENDSTOP + * + * Enable this option for a probe connected to any pin except Z-Min. + * (By default Marlin assumes the Z-Max endstop pin.) + * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below. + * + * - The simplest option is to use a free endstop connector. + * - Use 5V for powered (usually inductive) sensors. + * + * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin: + * - For simple switches connect... + * - normally-closed switches to GND and D32. + * - normally-open switches to 5V and D32. + * + * WARNING: Setting the wrong pin may have unexpected and potentially + * disastrous consequences. Use with caution and do your homework. + * + */ +//#define Z_MIN_PROBE_ENDSTOP + +/** + * Probe Type + * + * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc. + * Activate one of these to use Auto Bed Leveling below. + */ + +/** + * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + * Use G29 repeatedly, adjusting the Z height at each point with movement commands + * or (with LCD_BED_LEVELING) the LCD controller. + */ +//#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 + +/** + * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + * (e.g., an inductive probe or a nozzle-based probe-switch.) + */ +//#define FIX_MOUNTED_PROBE + +/** + * Z Servo Probe, such as an endstop switch on a rotating arm. + */ +//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. +//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles + +/** + * The BLTouch probe uses a Hall effect sensor and emulates a servo. + */ +//#define BLTOUCH +#if ENABLED(BLTOUCH) + //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#endif + +/** + * Enable one or more of the following if probing seems unreliable. + * Heaters and/or fans can be disabled during probing to minimize electrical + * noise. A delay can also be added to allow noise and vibration to settle. + * These options are most useful for the BLTouch probe, but may also improve + * readings with inductive probes and piezo sensors. + */ +//#define PROBING_HEATERS_OFF // Turn heaters off when probing +#if ENABLED(PROBING_HEATERS_OFF) + //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) +#endif +//#define PROBING_FANS_OFF // Turn fans off when probing +//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors + +// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) +//#define SOLENOID_PROBE + +// A sled-mounted probe like those designed by Charles Bell. +//#define Z_PROBE_SLED +//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. + +// +// For Z_PROBE_ALLEN_KEY see the Delta example configurations. +// + +/** + * Z Probe to nozzle (X,Y) offset, relative to (0, 0). + * X and Y offsets must be integers. + * + * In the following example the X and Y offsets are both positive: + * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + * + * +-- BACK ---+ + * | | + * L | (+) P | R <-- probe (20,20) + * E | | I + * F | (-) N (+) | G <-- nozzle (10,10) + * T | | H + * | (-) | T + * | | + * O-- FRONT --+ + * (0,0) + */ +#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER -3.5 // Z offset: -below +above [the nozzle] + +// Certain types of probes need to stay away from edges +#define MIN_PROBE_EDGE 10 + +// X and Y axis travel speed (mm/m) between probes +#define XY_PROBE_SPEED 4000 + +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) +#define Z_PROBE_SPEED_FAST DUMMY_HOMING_FEEDRATE + +// Feedrate (mm/m) for the "accurate" probe of each point +#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) + +// The number of probes to perform at each point. +// Set to 2 for a fast/slow probe, using the second probe result. +// Set to 3 or more for slow probes, averaging the results. +//#define MULTIPLE_PROBING 2 + +/** + * Z probes require clearance when deploying, stowing, and moving between + * probe points to avoid hitting the bed and other hardware. + * Servo-mounted probes require extra space for the arm to rotate. + * Inductive probes need space to keep from triggering early. + * + * Use these settings to specify the distance (mm) to raise the probe (or + * lower the bed). The values set here apply over and above any (negative) + * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + * Only integer values >= 1 are valid here. + * + * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. + */ +#define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow +#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes +//#define Z_AFTER_PROBING 5 // Z position after probing is done + +#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping + +// For M851 give a range for adjusting the Z probe offset +#define Z_PROBE_OFFSET_RANGE_MIN -20 +#define Z_PROBE_OFFSET_RANGE_MAX 20 + +// Enable the M48 repeatability test to test probe accuracy +//#define Z_MIN_PROBE_REPEATABILITY_TEST + +// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 +// :{ 0:'Low', 1:'High' } +#define X_ENABLE_ON 0 +#define Y_ENABLE_ON 0 +#define Z_ENABLE_ON 0 +#define E_ENABLE_ON 0 // For all extruders + +// Disables axis stepper immediately when it's not being used. +// WARNING: When motors turn off there is a chance of losing position accuracy! +// Never disable any motors on a Hangprinter +#define DISABLE_X false +#define DISABLE_Y false +#define DISABLE_Z false +// Warn on display about possibly reduced accuracy +//#define DISABLE_REDUCED_ACCURACY_WARNING + +// @section extruder + +#define DISABLE_E false // For all extruders +#define DISABLE_INACTIVE_EXTRUDER false // Keep only the active extruder enabled. + +// @section machine + +// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. +#define INVERT_A_DIR false +#define INVERT_B_DIR true +#define INVERT_C_DIR false +#define INVERT_D_DIR false + +#define INVERT_X_DIR INVERT_A_DIR +#define INVERT_Y_DIR INVERT_B_DIR +#define INVERT_Z_DIR INVERT_C_DIR +#if EXTRUDERS == 1 + #define INVERT_E1_DIR INVERT_D_DIR +#elif EXTRUDERS == 2 + #define INVERT_E2_DIR INVERT_D_DIR +#elif EXTRUDERS == 3 + #define INVERT_E3_DIR INVERT_D_DIR +#elif EXTRUDERS == 4 + #define INVERT_E4_DIR INVERT_D_DIR +#endif + +// Enable this option for Toshiba stepper drivers +//#define CONFIG_STEPPERS_TOSHIBA + +// @section extruder + +// For direct drive extruder v9 set to true, for geared extruder set to false. +#define INVERT_E0_DIR false +#if EXTRUDERS != 1 + #define INVERT_E1_DIR false +#endif +#if EXTRUDERS != 2 + #define INVERT_E2_DIR false +#endif +#if EXTRUDERS != 3 + #define INVERT_E3_DIR false +#endif +#if EXTRUDERS != 4 + #define INVERT_E4_DIR false +#endif + +// @section homing + +//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Don't use with Hangprinter + +//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. + +//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... + // Be sure you have this distance over your Z_MAX_POS in case. + +// Direction of endstops when homing; 1=MAX, -1=MIN +// :[-1,1] +#define X_HOME_DIR 1 // Doesn't make sense for Hangprinter since it doesn't move while homing +#define Y_HOME_DIR 1 +#define Z_HOME_DIR 1 + +// @section machine + +// The size of the print bed +#define X_BED_SIZE ((HANGPRINTER_PRINTABLE_RADIUS) * 2) +#define Y_BED_SIZE ((HANGPRINTER_PRINTABLE_RADIUS) * 2) + +// Travel limits (mm) after homing, corresponding to endstop positions. +#define X_MIN_POS -(HANGPRINTER_PRINTABLE_RADIUS) +#define Y_MIN_POS -(HANGPRINTER_PRINTABLE_RADIUS) +#define Z_MIN_POS 0 +#define X_MAX_POS HANGPRINTER_PRINTABLE_RADIUS +#define Y_MAX_POS HANGPRINTER_PRINTABLE_RADIUS +#define Z_MAX_POS (ANCHOR_D_Z - 300.0) + +/** + * Software Endstops + * + * - Prevent moves outside the set machine bounds. + * - Individual axes can be disabled, if desired. + * - X and Y only apply to Cartesian robots. + * - Use 'M211' to set software endstops on/off or report current state + */ + +// Min software endstops constrain movement within minimum coordinate bounds +// Don't use with Hangprinter +//#define MIN_SOFTWARE_ENDSTOPS +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) + #define MIN_SOFTWARE_ENDSTOP_X + #define MIN_SOFTWARE_ENDSTOP_Y + #define MIN_SOFTWARE_ENDSTOP_Z +#endif + +// Max software endstops constrain movement within maximum coordinate bounds +// Don't use with Hangprinter +//#define MAX_SOFTWARE_ENDSTOPS +#if ENABLED(MAX_SOFTWARE_ENDSTOPS) + #define MAX_SOFTWARE_ENDSTOP_X + #define MAX_SOFTWARE_ENDSTOP_Y + #define MAX_SOFTWARE_ENDSTOP_Z +#endif + +#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) + //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD +#endif + +/** + * Filament Runout Sensors + * Mechanical or opto endstops are used to check for the presence of filament. + * + * RAMPS-based boards use SERVO3_PIN for the first runout sensor. + * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + * By default the firmware assumes HIGH=FILAMENT PRESENT. + */ +//#define FILAMENT_RUNOUT_SENSOR +#if ENABLED(FILAMENT_RUNOUT_SENSOR) + #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. + #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. + #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. + #define FILAMENT_RUNOUT_SCRIPT "M600" +#endif + +//=========================================================================== +//=============================== Bed Leveling ============================== +//=========================================================================== +// @section calibrate + +/** + * Choose one of the options below to enable G29 Bed Leveling. The parameters + * and behavior of G29 will change depending on your selection. + * + * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + * + * - AUTO_BED_LEVELING_3POINT + * Probe 3 arbitrary points on the bed (that aren't collinear) + * You specify the XY coordinates of all 3 points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_LINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a single tilted plane. Best for a flat bed. + * + * - AUTO_BED_LEVELING_BILINEAR + * Probe several points in a grid. + * You specify the rectangle and the density of sample points. + * The result is a mesh, best for large or uneven beds. + * + * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + * A comprehensive bed leveling system combining the features and benefits + * of other systems. UBL also includes integrated Mesh Generation, Mesh + * Validation and Mesh Editing systems. + * + * - MESH_BED_LEVELING + * Probe a grid manually + * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + * For machines without a probe, Mesh Bed Leveling provides a method to perform + * leveling in steps so you can manually adjust the Z height at each grid-point. + * With an LCD controller the process is guided step-by-step. + */ +//#define AUTO_BED_LEVELING_3POINT +//#define AUTO_BED_LEVELING_LINEAR +//#define AUTO_BED_LEVELING_BILINEAR +//#define AUTO_BED_LEVELING_UBL +//#define MESH_BED_LEVELING + +/** + * Normally G28 leaves leveling disabled on completion. Enable + * this option to have G28 restore the prior leveling state. + */ +//#define RESTORE_LEVELING_AFTER_G28 + +/** + * Enable detailed logging of G28, G29, M48, etc. + * Turn on with the command 'M111 S32'. + * NOTE: Requires a lot of PROGMEM! + */ +//#define DEBUG_LEVELING_FEATURE + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) + // Gradually reduce leveling correction until a set height is reached, + // at which point movement will be level to the machine's XY plane. + // The height can be set with M420 Z + //#define ENABLE_LEVELING_FADE_HEIGHT + + // Set the boundaries for probing (where the probe can reach). + #define HANGPRINTER_PROBEABLE_RADIUS (HANGPRINTER_PRINTABLE_RADIUS - 10) + + // For Cartesian machines, instead of dividing moves on mesh boundaries, + // split up moves into short segments like a Delta. This follows the + // contours of the bed more closely than edge-to-edge straight moves. + #define SEGMENT_LEVELED_MOVES + #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) + + /** + * Enable the G26 Mesh Validation Pattern tool. + */ + //#define G26_MESH_VALIDATION + #if ENABLED(G26_MESH_VALIDATION) + #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. + #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. + #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. + #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. + #endif + +#endif + +#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Set the number of grid points per dimension. + #define GRID_MAX_POINTS_X 9 + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + // Set the boundaries for probing (where the probe can reach). + #define LEFT_PROBE_BED_POSITION -(HANGPRINTER_PROBEABLE_RADIUS) + #define RIGHT_PROBE_BED_POSITION HANGPRINTER_PROBEABLE_RADIUS + #define FRONT_PROBE_BED_POSITION -(HANGPRINTER_PROBEABLE_RADIUS) + #define BACK_PROBE_BED_POSITION HANGPRINTER_PROBEABLE_RADIUS + + // Probe along the Y axis, advancing X after each column + //#define PROBE_Y_FIRST + + #if ENABLED(AUTO_BED_LEVELING_BILINEAR) + + // Beyond the probed grid, continue the implied tilt? + // Default is to maintain the height of the nearest edge. + //#define EXTRAPOLATE_BEYOND_GRID + + // + // Experimental Subdivision of the grid by Catmull-Rom method. + // Synthesizes intermediate points to produce a more detailed mesh. + // + //#define ABL_BILINEAR_SUBDIVISION + #if ENABLED(ABL_BILINEAR_SUBDIVISION) + // Number of subdivisions between probe points + #define BILINEAR_SUBDIVISIONS 3 + #endif + + #endif + +#elif ENABLED(AUTO_BED_LEVELING_UBL) + + //=========================================================================== + //========================= Unified Bed Leveling ============================ + //=========================================================================== + + //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh + + #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle + #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + + //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used + // as the Z-Height correction value. + +#elif ENABLED(MESH_BED_LEVELING) + + //=========================================================================== + //=================================== Mesh ================================== + //=========================================================================== + + #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed + #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. + #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X + + //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS + +#endif // BED_LEVELING + +/** + * Points to probe for all 3-point Leveling procedures. + * Override if the automatically selected points are inadequate. + */ +#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) + #define _PX(R,A) (R) * cos(RADIANS(A)) + #define _PY(R,A) (R) * sin(RADIANS(A)) + #define UBL_PROBE_PT_1_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 0) // Probing points for 3-Point leveling of the mesh + #define UBL_PROBE_PT_1_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 0) + #define UBL_PROBE_PT_2_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_2_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 120) + #define UBL_PROBE_PT_3_X _PX(HANGPRINTER_PROBEABLE_RADIUS, 240) + #define UBL_PROBE_PT_3_Y _PY(HANGPRINTER_PROBEABLE_RADIUS, 240) +#endif + +/** + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. + */ +//#define LCD_BED_LEVELING + +#if ENABLED(LCD_BED_LEVELING) + #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. + #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#endif + +// Add a menu item to move between bed corners for manual bed adjustment +//#define LEVEL_BED_CORNERS + +#if ENABLED(LEVEL_BED_CORNERS) + #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling + //#define LEVEL_CENTER_TOO // Move to the center after the last corner +#endif + +/** + * Commands to execute at the end of G29 probing. + * Useful to retract or move the Z probe out of the way. + */ +//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" + + +// @section homing + +// The center of the bed is at (X=0, Y=0) +#define BED_CENTER_AT_0_0 + +// Manually set the home position. Leave these undefined for automatic settings. +// For HANGPRINTER this is the bottom-center of the Cartesian print volume. +//#define MANUAL_X_HOME_POS 0 +//#define MANUAL_Y_HOME_POS 0 +//#define MANUAL_Z_HOME_POS 0 + +// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area. +// +// With this feature enabled: +// +// - Allow Z homing only after X and Y homing AND stepper drivers still enabled. +// - If stepper drivers time out, it will need X and Y homing again before Z homing. +// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). +// - Prevent Z homing when the Z probe is outside bed area. +// +//#define Z_SAFE_HOMING + +#if ENABLED(Z_SAFE_HOMING) + #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). + #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#endif + +// Hangprinter doesn't have automatic homing +#define DUMMY_HOMING_FEEDRATE (200*60) + +// Homing speeds (mm/m) +#define HOMING_FEEDRATE_XY (50*60) +#define HOMING_FEEDRATE_Z (4*60) + +// @section calibrate + +/** + * Bed Skew Compensation + * + * This feature corrects for misalignment in the XYZ axes. + * + * Take the following steps to get the bed skew in the XY plane: + * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + * 2. For XY_DIAG_AC measure the diagonal A to C + * 3. For XY_DIAG_BD measure the diagonal B to D + * 4. For XY_SIDE_AD measure the edge A to D + * + * Marlin automatically computes skew factors from these measurements. + * Skew factors may also be computed and set manually: + * + * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + * + * If desired, follow the same procedure for XZ and YZ. + * Use these diagrams for reference: + * + * Y Z Z + * ^ B-------C ^ B-------C ^ B-------C + * | / / | / / | / / + * | / / | / / | / / + * | A-------D | A-------D | A-------D + * +-------------->X +-------------->X +-------------->Y + * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR + */ +//#define SKEW_CORRECTION + +#if ENABLED(SKEW_CORRECTION) + // Input all length measurements here: + #define XY_DIAG_AC 282.8427124746 + #define XY_DIAG_BD 282.8427124746 + #define XY_SIDE_AD 200 + + // Or, set the default skew factors directly here + // to override the above measurements: + #define XY_SKEW_FACTOR 0.0 + + //#define SKEW_CORRECTION_FOR_Z + #if ENABLED(SKEW_CORRECTION_FOR_Z) + #define XZ_DIAG_AC 282.8427124746 + #define XZ_DIAG_BD 282.8427124746 + #define YZ_DIAG_AC 282.8427124746 + #define YZ_DIAG_BD 282.8427124746 + #define YZ_SIDE_AD 200 + #define XZ_SKEW_FACTOR 0.0 + #define YZ_SKEW_FACTOR 0.0 + #endif + + // Enable this option for M852 to set skew at runtime + //#define SKEW_CORRECTION_GCODE +#endif + +//============================================================================= +//============================= Additional Features =========================== +//============================================================================= + +// @section extras + +// +// EEPROM +// +// The microcontroller can store settings in the EEPROM, e.g. max velocity... +// M500 - stores parameters in EEPROM +// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). +// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. +// +#define EEPROM_SETTINGS // Enable for M500 and M501 commands +//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. + +// +// Host Keepalive +// +// When enabled Marlin will send a busy status message to the host +// every couple of seconds when it can't accept commands. +// +#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages +#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113. +#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating + +// +// M100 Free Memory Watcher +// +//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage + +// +// G20/G21 Inch mode support +// +//#define INCH_MODE_SUPPORT + +// +// M149 Set temperature units support +// +//#define TEMPERATURE_UNITS_SUPPORT + +// @section temperature + +// Preheat Constants +#define PREHEAT_1_TEMP_HOTEND 180 +#define PREHEAT_1_TEMP_BED 70 +#define PREHEAT_1_FAN_SPEED 255 // Value from 0 to 255 + +#define PREHEAT_2_TEMP_HOTEND 240 +#define PREHEAT_2_TEMP_BED 100 +#define PREHEAT_2_FAN_SPEED 255 // Value from 0 to 255 + +/** + * Nozzle Park + * + * Park the nozzle at the given XYZ position on idle or G27. + * + * The "P" parameter controls the action applied to the Z axis: + * + * P0 (Default) If Z is below park Z raise the nozzle. + * P1 Raise the nozzle always to Z-park height. + * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. + */ +//#define NOZZLE_PARK_FEATURE + +#if ENABLED(NOZZLE_PARK_FEATURE) + // Specify a park position as { X, Y, Z } + #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } + #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) + #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +#endif + +/** + * Clean Nozzle Feature -- EXPERIMENTAL + * + * Adds the G12 command to perform a nozzle cleaning process. + * + * Parameters: + * P Pattern + * S Strokes / Repetitions + * T Triangles (P1 only) + * + * Patterns: + * P0 Straight line (default). This process requires a sponge type material + * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + * between the start / end points. + * + * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + * number of zig-zag triangles to do. "S" defines the number of strokes. + * Zig-zags are done in whichever is the narrower dimension. + * For example, "G12 P1 S1 T3" will execute: + * + * -- + * | (X0, Y1) | /\ /\ /\ | (X1, Y1) + * | | / \ / \ / \ | + * A | | / \ / \ / \ | + * | | / \ / \ / \ | + * | (X0, Y0) | / \/ \/ \ | (X1, Y0) + * -- +--------------------------------+ + * |________|_________|_________| + * T1 T2 T3 + * + * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + * "R" specifies the radius. "S" specifies the stroke count. + * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + * + * Caveats: The ending Z should be the same as starting Z. + * Attention: EXPERIMENTAL. G-code arguments may change. + * + */ +//#define NOZZLE_CLEAN_FEATURE + +#if ENABLED(NOZZLE_CLEAN_FEATURE) + // Default number of pattern repetitions + #define NOZZLE_CLEAN_STROKES 12 + + // Default number of triangles + #define NOZZLE_CLEAN_TRIANGLES 3 + + // Specify positions as { X, Y, Z } + #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} + #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} + + // Circular pattern radius + #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 + // Circular pattern circle fragments number + #define NOZZLE_CLEAN_CIRCLE_FN 10 + // Middle point of circle + #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT + + // Moves the nozzle to the initial position + #define NOZZLE_CLEAN_GOBACK +#endif + +/** + * Print Job Timer + * + * Automatically start and stop the print job timer on M104/M109/M190. + * + * M104 (hotend, no wait) - high temp = none, low temp = stop timer + * M109 (hotend, wait) - high temp = start timer, low temp = stop timer + * M190 (bed, wait) - high temp = start timer, low temp = none + * + * The timer can also be controlled with the following commands: + * + * M75 - Start the print job timer + * M76 - Pause the print job timer + * M77 - Stop the print job timer + */ +#define PRINTJOB_TIMER_AUTOSTART + +/** + * Print Counter + * + * Track statistical data such as: + * + * - Total print jobs + * - Total successful print jobs + * - Total failed print jobs + * - Total time printing + * + * View the current statistics with M78. + */ +//#define PRINTCOUNTER + +//============================================================================= +//============================= LCD and SD support ============================ +//============================================================================= + +// @section lcd + +/** + * LCD LANGUAGE + * + * Select the language to display on the LCD. These languages are available: + * + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test + * + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } + */ +#define LCD_LANGUAGE en + +/** + * LCD Character Set + * + * Note: This option is NOT applicable to Graphical Displays. + * + * All character-based LCDs provide ASCII plus one of these + * language extensions: + * + * - JAPANESE ... the most common + * - WESTERN ... with more accented characters + * - CYRILLIC ... for the Russian language + * + * To determine the language extension installed on your controller: + * + * - Compile and upload with LCD_LANGUAGE set to 'test' + * - Click the controller to view the LCD menu + * - The LCD will display Japanese, Western, or Cyrillic text + * + * See http://marlinfw.org/docs/development/lcd_language.html + * + * :['JAPANESE', 'WESTERN', 'CYRILLIC'] + */ +#define DISPLAY_CHARSET_HD44780 JAPANESE + +/** + * SD CARD + * + * SD Card support is disabled by default. If your controller has an SD slot, + * you must uncomment the following option or it won't work. + * + */ +//#define SDSUPPORT + +/** + * SD CARD: SPI SPEED + * + * Enable one of the following items for a slower SPI transfer speed. + * This may be required to resolve "volume init" errors. + */ +//#define SPI_SPEED SPI_HALF_SPEED +//#define SPI_SPEED SPI_QUARTER_SPEED +//#define SPI_SPEED SPI_EIGHTH_SPEED + +/** + * SD CARD: ENABLE CRC + * + * Use CRC checks and retries on the SD communication. + */ +//#define SD_CHECK_AND_RETRY + +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + +// +// ENCODER SETTINGS +// +// This option overrides the default number of encoder pulses needed to +// produce one step. Should be increased for high-resolution encoders. +// +//#define ENCODER_PULSES_PER_STEP 4 + +// +// Use this option to override the number of step signals required to +// move between next/prev menu items. +// +//#define ENCODER_STEPS_PER_MENU_ITEM 1 + +/** + * Encoder Direction Options + * + * Test your encoder's behavior first with both options disabled. + * + * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + * Reversed Value Editing only? Enable BOTH options. + */ + +// +// This option reverses the encoder direction everywhere. +// +// Set this option if CLOCKWISE causes values to DECREASE +// +//#define REVERSE_ENCODER_DIRECTION + +// +// This option reverses the encoder direction for navigating LCD menus. +// +// If CLOCKWISE normally moves DOWN this makes it go UP. +// If CLOCKWISE normally moves UP this makes it go DOWN. +// +//#define REVERSE_MENU_DIRECTION + +// +// Individual Axis Homing +// +// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. +// +//#define INDIVIDUAL_AXIS_HOMING_MENU + +// +// SPEAKER/BUZZER +// +// If you have a speaker that can produce tones, enable it here. +// By default Marlin assumes you have a buzzer with a fixed frequency. +// +//#define SPEAKER + +// +// The duration and frequency for the UI feedback sound. +// Set these to 0 to disable audio feedback in the LCD menus. +// +// Note: Test audio output with the G-Code: +// M300 S P +// +//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 +//#define LCD_FEEDBACK_FREQUENCY_HZ 5000 + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + +// +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller +// +// Note: Usually sold with a white PCB. +// +//#define REPRAP_DISCOUNT_SMART_CONTROLLER + +// +// ULTIMAKER Controller. +// +//#define ULTIMAKERCONTROLLER + +// +// ULTIPANEL as seen on Thingiverse. +// +//#define ULTIPANEL + +// +// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3) +// http://reprap.org/wiki/PanelOne +// +//#define PANEL_ONE + +// +// GADGETS3D G3D LCD/SD Controller +// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel +// +// Note: Usually sold with a blue PCB. +// +//#define G3D_PANEL + +// +// RigidBot Panel V1.0 +// http://www.inventapart.com/ +// +//#define RIGIDBOT_PANEL + +// +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html +// +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 + +// +// ANET and Tronxy 20x4 Controller +// +//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. + // This LCD is known to be susceptible to electrical interference + // which scrambles the display. Pressing any button clears it up. + // This is a LCD2004 display with 5 analog buttons. + +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD + +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= + +// +// CONTROLLER TYPE: I2C +// +// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C +// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C +// + +// +// Elefu RA Board Control Panel +// http://www.elefu.com/index.php?route=product/product&product_id=53 +// +//#define RA_CONTROL_PANEL + +// +// Sainsmart (YwRobot) LCD Displays +// +// These require F.Malpartida's LiquidCrystal_I2C library +// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home +// +//#define LCD_SAINSMART_I2C_1602 +//#define LCD_SAINSMART_I2C_2004 + +// +// Generic LCM1602 LCD adapter +// +//#define LCM1602 + +// +// PANELOLU2 LCD with status LEDs, +// separate encoder and click inputs. +// +// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later. +// For more info: https://github.com/lincomatic/LiquidTWI2 +// +// Note: The PANELOLU2 encoder click input can either be directly connected to +// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1). +// +//#define LCD_I2C_PANELOLU2 + +// +// Panucatt VIKI LCD with status LEDs, +// integrated click & L/R/U/D buttons, separate encoder inputs. +// +//#define LCD_I2C_VIKI + +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + +// +// SSD1306 OLED full graphics generic display +// +//#define U8GLIB_SSD1306 + +// +// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules +// +//#define SAV_3DGLCD +#if ENABLED(SAV_3DGLCD) + //#define U8GLIB_SSD1306 + #define U8GLIB_SH1106 +#endif + +// +// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder +// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1) +// +//#define ULTI_CONTROLLER + +// +// TinyBoy2 128x64 OLED / Encoder Panel +// +//#define OLED_PANEL_TINYBOY2 + +// +// MKS MINI12864 with graphic controller and SD support +// http://reprap.org/wiki/MKS_MINI_12864 +// +//#define MKS_MINI_12864 + +// +// Factory display for Creality CR-10 +// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html +// +// This is RAMPS-compatible using a single 10-pin connector. +// (For CR-10 owners who want to replace the Melzi Creality board but retain the display) +// +//#define CR10_STOCKDISPLAY + +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + +// +// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER +// http://reprap.org/wiki/MKS_12864OLED +// +// Tiny, but very sharp OLED display +// +//#define MKS_12864OLED // Uses the SH1106 controller (default) +//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller + +// +// Silvergate GLCD controller +// http://github.com/android444/Silvergate +// +//#define SILVER_GATE_GLCD_CONTROLLER + +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + +//============================================================================= +//=============================== Extra Features ============================== +//============================================================================= + +// @section extras + +// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino +//#define FAST_PWM_FAN + +// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency +// which is not as annoying as with the hardware PWM. On the other hand, if this frequency +// is too low, you should also increment SOFT_PWM_SCALE. +//#define FAN_SOFT_PWM + +// Incrementing this by 1 will double the software PWM frequency, +// affecting heaters, and the fan if FAN_SOFT_PWM is enabled. +// However, control resolution will be halved for each increment; +// at zero value, there are 128 effective control positions. +#define SOFT_PWM_SCALE 0 + +// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can +// be used to mitigate the associated resolution loss. If enabled, +// some of the PWM cycles are stretched so on average the desired +// duty cycle is attained. +//#define SOFT_PWM_DITHER + +// Temperature status LEDs that display the hotend and bed temperature. +// If all hotends, bed temperature, and target temperature are under 54C +// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis) +//#define TEMP_STAT_LEDS + +// M240 Triggers a camera by emulating a Canon RC-1 Remote +// Data from: http://www.doc-diy.net/photo/rc-1_hacked/ +//#define PHOTOGRAPH_PIN 23 + +// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure +//#define SF_ARC_FIX + +// Support for the BariCUDA Paste Extruder +//#define BARICUDA + +// Support for BlinkM/CyzRgb +//#define BLINKM + +// Support for PCA9632 PWM LED driver +//#define PCA9632 + +/** + * RGB LED / LED Strip Control + * + * Enable support for an RGB LED connected to 5V digital pins, or + * an RGB Strip connected to MOSFETs controlled by digital pins. + * + * Adds the M150 command to set the LED (or LED strip) color. + * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + * luminance values can be set from 0 to 255. + * For Neopixel LED an overall brightness parameter is also available. + * + * *** CAUTION *** + * LED Strips require a MOSFET Chip between PWM lines and LEDs, + * as the Arduino cannot handle the current the LEDs will require. + * Failure to follow this precaution can destroy your Arduino! + * NOTE: A separate 5V power supply is required! The Neopixel LED needs + * more current than the Arduino 5V linear regulator can produce. + * *** CAUTION *** + * + * LED Type. Enable only one of the following two options. + * + */ +//#define RGB_LED +//#define RGBW_LED + +#if ENABLED(RGB_LED) || ENABLED(RGBW_LED) + #define RGB_LED_R_PIN 34 + #define RGB_LED_G_PIN 43 + #define RGB_LED_B_PIN 35 + #define RGB_LED_W_PIN -1 +#endif + +// Support for Adafruit Neopixel LED driver +//#define NEOPIXEL_LED +#if ENABLED(NEOPIXEL_LED) + #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) + #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) + #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip + #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. + #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) + //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#endif + +/** + * Printer Event LEDs + * + * During printing, the LEDs will reflect the printer status: + * + * - Gradually change from blue to violet as the heated bed gets to target temp + * - Gradually change from violet to red as the hotend gets to temperature + * - Change to white to illuminate work surface + * - Change to green once print has finished + * - Turn off after the print has finished and the user has pushed a button + */ +#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) + #define PRINTER_EVENT_LEDS +#endif + +/** + * R/C SERVO support + * Sponsored by TrinityLabs, Reworked by codexmas + */ + +/** + * Number of servos + * + * For some servo-related options NUM_SERVOS will be set automatically. + * Set this manually if there are extra servos needing manual control. + * Leave undefined or set to 0 to entirely disable the servo subsystem. + */ +//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command + +// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. +// 300ms is a good value but you can try less delay. +// If the servo can't reach the requested position, increase it. +#define SERVO_DELAY { 300 } + +// Only power servos during movement, otherwise leave off to prevent jitter +//#define DEACTIVATE_SERVOS_AFTER_MOVE + +#endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/hangprinter/Configuration_adv.h b/Marlin/example_configurations/hangprinter/Configuration_adv.h new file mode 100644 index 0000000000..2d94e5edab --- /dev/null +++ b/Marlin/example_configurations/hangprinter/Configuration_adv.h @@ -0,0 +1,1707 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Configuration_adv.h + * + * Advanced settings. + * Only change these if you know exactly what you're doing. + * Some of these settings can damage your printer if improperly set! + * + * Basic settings can be found in Configuration.h + * + */ +#ifndef CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H +#define CONFIGURATION_ADV_H_VERSION 010109 + +// @section temperature + +//=========================================================================== +//=============================Thermal Settings ============================ +//=========================================================================== + +// +// Hephestos 2 24V heated bed upgrade kit. +// https://store.bq.com/en/heated-bed-kit-hephestos2 +// +//#define HEPHESTOS2_HEATED_BED_KIT +#if ENABLED(HEPHESTOS2_HEATED_BED_KIT) + #undef TEMP_SENSOR_BED + #define TEMP_SENSOR_BED 70 + #define HEATER_BED_INVERTING true +#endif + +#if DISABLED(PIDTEMPBED) + #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control + #if ENABLED(BED_LIMIT_SWITCHING) + #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS + #endif +#endif + +/** + * Thermal Protection provides additional protection to your printer from damage + * and fire. Marlin always includes safe min and max temperature ranges which + * protect against a broken or disconnected thermistor wire. + * + * The issue: If a thermistor falls out, it will report the much lower + * temperature of the air in the room, and the the firmware will keep + * the heater on. + * + * The solution: Once the temperature reaches the target, start observing. + * If the temperature stays too far below the target (hysteresis) for too + * long (period), the firmware will halt the machine as a safety precaution. + * + * If you get false positives for "Thermal Runaway", increase + * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD + */ +#if ENABLED(THERMAL_PROTECTION_HOTENDS) + #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius + + /** + * Whenever an M104, M109, or M303 increases the target temperature, the + * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature + * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and + * requires a hard reset. This test restarts with any M104/M109/M303, but only + * if the current temperature is far enough below the target for a reliable + * test. + * + * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD + * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set + * below 2. + */ + #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_INCREASE 2 // Degrees Celsius +#endif + +/** + * Thermal Protection parameters for the bed are just as above for hotends. + */ +#if ENABLED(THERMAL_PROTECTION_BED) + #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius + + /** + * As described above, except for the bed (M140/M190/M303). + */ + #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius +#endif + +#if ENABLED(PIDTEMP) + // this adds an experimental additional term to the heating power, proportional to the extrusion speed. + // if Kc is chosen well, the additional required power due to increased melting should be compensated. + //#define PID_EXTRUSION_SCALING + #if ENABLED(PID_EXTRUSION_SCALING) + #define DEFAULT_Kc (100) //heating power=Kc*(e_speed) + #define LPQ_MAX_LEN 50 + #endif +#endif + +/** + * Automatic Temperature: + * The hotend target temperature is calculated by all the buffered lines of gcode. + * The maximum buffered steps/sec of the extruder motor is called "se". + * Start autotemp mode with M109 S B F + * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by + * mintemp and maxtemp. Turn this off by executing M109 without F* + * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. + * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode + */ +#define AUTOTEMP +#if ENABLED(AUTOTEMP) + #define AUTOTEMP_OLDWEIGHT 0.98 +#endif + +// Show extra position information in M114 +//#define M114_DETAIL + +// Show Temperature ADC value +// Enable for M105 to include ADC values read from temperature sensors. +//#define SHOW_TEMP_ADC_VALUES + +/** + * High Temperature Thermistor Support + * + * Thermistors able to support high temperature tend to have a hard time getting + * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP + * will probably be caught when the heating element first turns on during the + * preheating process, which will trigger a min_temp_error as a safety measure + * and force stop everything. + * To circumvent this limitation, we allow for a preheat time (during which, + * min_temp_error won't be triggered) and add a min_temp buffer to handle + * aberrant readings. + * + * If you want to enable this feature for your hotend thermistor(s) + * uncomment and set values > 0 in the constants below + */ + +// The number of consecutive low temperature errors that can occur +// before a min_temp_error is triggered. (Shouldn't be more than 10.) +//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0 + +// The number of milliseconds a hotend will preheat before starting to check +// the temperature. This value should NOT be set to the time it takes the +// hot end to reach the target temperature, but the time it takes to reach +// the minimum temperature your thermistor can read. The lower the better/safer. +// This shouldn't need to be more than 30 seconds (30000) +//#define MILLISECONDS_PREHEAT_TIME 0 + +// @section extruder + +// Extruder runout prevention. +// If the machine is idle and the temperature over MINTEMP +// then extrude some filament every couple of SECONDS. +//#define EXTRUDER_RUNOUT_PREVENT +#if ENABLED(EXTRUDER_RUNOUT_PREVENT) + #define EXTRUDER_RUNOUT_MINTEMP 190 + #define EXTRUDER_RUNOUT_SECONDS 30 + #define EXTRUDER_RUNOUT_SPEED 1500 // mm/m + #define EXTRUDER_RUNOUT_EXTRUDE 5 // mm +#endif + +// @section temperature + +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 + +/** + * Controller Fan + * To cool down the stepper drivers and MOSFETs. + * + * The fan will turn on automatically whenever any stepper is enabled + * and turn off after a set period after all steppers are turned off. + */ +//#define USE_CONTROLLER_FAN +#if ENABLED(USE_CONTROLLER_FAN) + //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled + #define CONTROLLERFAN_SPEED 255 // 255 == full speed +#endif + +// When first starting the main fan, run it at full speed for the +// given number of milliseconds. This gets the fan spinning reliably +// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) +//#define FAN_KICKSTART_TIME 100 + +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ +//#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 + +// @section extruder + +/** + * Extruder cooling fans + * + * Extruder auto fans automatically turn on when their extruders' + * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE. + * + * Your board's pins file specifies the recommended pins. Override those here + * or set to -1 to disable completely. + * + * Multiple extruders can be assigned to the same pin in which case + * the fan will turn on when any selected extruder is above the threshold. + */ +#define E0_AUTO_FAN_PIN -1 +#define E1_AUTO_FAN_PIN -1 +#define E2_AUTO_FAN_PIN -1 +#define E3_AUTO_FAN_PIN -1 +#define E4_AUTO_FAN_PIN -1 +#define CHAMBER_AUTO_FAN_PIN -1 +#define EXTRUDER_AUTO_FAN_TEMPERATURE 50 +#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed + +/** + * Part-Cooling Fan Multiplexer + * + * This feature allows you to digitally multiplex the fan output. + * The multiplexer is automatically switched at tool-change. + * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans. + */ +#define FANMUX0_PIN -1 +#define FANMUX1_PIN -1 +#define FANMUX2_PIN -1 + +/** + * M355 Case Light on-off / brightness + */ +//#define CASE_LIGHT_ENABLE +#if ENABLED(CASE_LIGHT_ENABLE) + //#define CASE_LIGHT_PIN 4 // Override the default pin if needed + #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW + #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on + #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin) + //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu + //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED. + #if ENABLED(CASE_LIGHT_USE_NEOPIXEL) + #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White } + #endif +#endif + +//=========================================================================== +//============================ Mechanical Settings ========================== +//=========================================================================== + +// @section homing + +// If you want endstops to stay on (by default) even when not homing +// enable this option. Override at any time with M120, M121. +//#define ENDSTOPS_ALWAYS_ON_DEFAULT + +// @section extras + +//#define Z_LATE_ENABLE // Enable Z the last moment. Never uncomment this on a Hangprinter. + +/** + * Dual Steppers / Dual Endstops + * + * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes. + * (A, B, C, or D for Hangprinter). + * + * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to + * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop + * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug + * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'. + * + * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors + * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error + * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'. + */ + +// This is the A motor on Hangprinter +//#define X_DUAL_STEPPER_DRIVERS +#if ENABLED(X_DUAL_STEPPER_DRIVERS) + #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions + //#define X_DUAL_ENDSTOPS + #if ENABLED(X_DUAL_ENDSTOPS) + #define X2_USE_ENDSTOP _XMAX_ + #define X_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +// This is the B motor on Hangprinter +//#define Y_DUAL_STEPPER_DRIVERS +#if ENABLED(Y_DUAL_STEPPER_DRIVERS) + #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions + //#define Y_DUAL_ENDSTOPS + #if ENABLED(Y_DUAL_ENDSTOPS) + #define Y2_USE_ENDSTOP _YMAX_ + #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +// This is the C motor on Hangprinter +//#define Z_DUAL_STEPPER_DRIVERS +#if ENABLED(Z_DUAL_STEPPER_DRIVERS) + //#define Z_DUAL_ENDSTOPS + #if ENABLED(Z_DUAL_ENDSTOPS) + #define Z2_USE_ENDSTOP _XMAX_ + #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0 + #endif +#endif + +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ +//#define DUAL_X_CARRIAGE +#if ENABLED(DUAL_X_CARRIAGE) + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage + #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed + #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position + #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position + // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software + // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops + // without modifying the firmware (through the "M218 T1 X???" command). + // Remember: you should set the second extruder x-offset to 0 in your slicer. + + // There are a few selectable movement modes for dual x-carriages using M605 S + // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results + // as long as it supports dual x-carriages. (M605 S0) + // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so + // that additional slicer support is not required. (M605 S1) + // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all + // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at + // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm]) + + // This is the default power-up mode which can be later using M605. + #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE + + // Default settings in "Auto-park Mode" + #define TOOLCHANGE_PARK_ZLIFT 0.2 // the distance to raise Z axis when parking an extruder + #define TOOLCHANGE_UNPARK_ZLIFT 1 // the distance to raise Z axis when unparking an extruder + + // Default x offset in duplication mode (typically set to half print bed width) + #define DEFAULT_DUPLICATION_X_OFFSET 100 + +#endif // DUAL_X_CARRIAGE + +// Activate a solenoid on the active extruder with M380. Disable all with M381. +// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid. +//#define EXT_SOLENOID + +// @section homing + +// Homing hits each endstop, retracts by these distances, then does a slower bump. +#define X_HOME_BUMP_MM 5 +#define Y_HOME_BUMP_MM 5 +#define Z_HOME_BUMP_MM 5 +#define HOMING_BUMP_DIVISOR { 10, 10, 10 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) +//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially + +// When G28 is called, this option will make Y home before X +//#define HOME_Y_BEFORE_X + +// Enable this if X or Y can't home without homing the other axis first. +//#define CODEPENDENT_XY_HOMING + +// @section machine + +#define AXIS_RELATIVE_MODES {false, false, false, false} + +// Allow duplication mode with a basic dual-nozzle extruder +//#define DUAL_NOZZLE_DUPLICATION_MODE + +// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step. +#define INVERT_X_STEP_PIN false +#define INVERT_Y_STEP_PIN false +#define INVERT_Z_STEP_PIN false +#if ENABLED(HANGPRINTER) + #define INVERT_A_STEP_PIN false + #define INVERT_B_STEP_PIN false + #define INVERT_C_STEP_PIN false + #define INVERT_D_STEP_PIN false +#endif +#define INVERT_E_STEP_PIN false + +// Default stepper release if idle. Set to 0 to deactivate. +// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true. +// Time can be set by M18 and M84. +#define DEFAULT_STEPPER_DEACTIVE_TIME 60 +#define DISABLE_INACTIVE_X false // Hangprinter is hard coded to never disable its ABCD-motors, even if true would be specified here +#define DISABLE_INACTIVE_Y false +#define DISABLE_INACTIVE_Z false +#define DISABLE_INACTIVE_E true // Enabling/disabling E-stepper works as normal with Hangprinter + +#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate +#define DEFAULT_MINTRAVELFEEDRATE 0.0 + +//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated + +// @section lcd + +#if ENABLED(ULTIPANEL) + #define MANUAL_FEEDRATE_XYZ 50*60 + #define MANUAL_FEEDRATE { MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, MANUAL_FEEDRATE_XYZ, 60 } // Feedrates for manual moves along X, Y, Z, E from panel + #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder +#endif + +// @section extras + +// minimum time in microseconds that a movement needs to take if the buffer is emptied. +#define DEFAULT_MINSEGMENTTIME 20000 + +// If defined the movements slow down when the look ahead buffer is only half full +// (don't use SLOWDOWN with DELTA because DELTA generates hundreds of segments per second) +//#define SLOWDOWN + +// Frequency limit +// See nophead's blog for more info +// Not working O +//#define XY_FREQUENCY_LIMIT 15 + +// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end +// of the buffer and all stops. This should not be much greater than zero and should only be changed +// if unwanted behavior is observed on a user's machine when running at very slow speeds. +#define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) + +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + +// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] + +/** + * @section stepper motor current + * + * Some boards have a means of setting the stepper motor current via firmware. + * + * The power on motor currents are set by: + * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2 + * known compatible chips: A4982 + * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H + * known compatible chips: AD5206 + * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2 + * known compatible chips: MCP4728 + * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, MIGHTYBOARD_REVE + * known compatible chips: MCP4451, MCP4018 + * + * Motor currents can also be set by M907 - M910 and by the LCD. + * M907 - applies to all. + * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H + * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2 + * + * Hangprinter note: the below arrays might need another element to match ABCD/ABCDE + */ +//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps +//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A) +//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis + +// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro) +//#define DIGIPOT_I2C +#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A) + /** + * Common slave addresses: + * + * A (A shifted) B (B shifted) IC + * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451 + * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451 + * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018 + */ + #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT + #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT +#endif + +//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster +#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 +// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS. +// These correspond to the physical drivers, so be mindful if the order is changed. +#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO + +//=========================================================================== +//=============================Additional Features=========================== +//=========================================================================== + +#define ENCODER_RATE_MULTIPLIER // If defined, certain menu edit operations automatically multiply the steps when the encoder is moved quickly +#define ENCODER_10X_STEPS_PER_SEC 75 // If the encoder steps per sec exceeds this value, multiply steps moved x10 to quickly advance the value +#define ENCODER_100X_STEPS_PER_SEC 160 // If the encoder steps per sec exceeds this value, multiply steps moved x100 to really quickly advance the value + +//#define CHDK 4 //Pin for triggering CHDK to take a picture see how to use it here http://captain-slow.dk/2014/03/09/3d-printing-timelapses/ +#define CHDK_DELAY 50 //How long in ms the pin should stay HIGH before going LOW again + +// @section lcd + +// Include a page of printer information in the LCD Main Menu +//#define LCD_INFO_MENU + +// Scroll a longer status message into view +//#define STATUS_MESSAGE_SCROLLING + +// On the Info Screen, display XY with one decimal place when possible +//#define LCD_DECIMAL_SMALL_XY + +// The timeout (in ms) to return to the status screen from sub-menus +//#define LCD_TIMEOUT_TO_STATUS 15000 + +// Add an 'M73' G-code to set the current percentage +//#define LCD_SET_PROGRESS_MANUALLY + +#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) + //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing + #if ENABLED(LCD_PROGRESS_BAR) + #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar + #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message + #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever) + //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it + //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar + #endif +#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY + +/** + * LED Control Menu + * Enable this feature to add LED Control to the LCD menu + */ +//#define LED_CONTROL_MENU +#if ENABLED(LED_CONTROL_MENU) + #define LED_COLOR_PRESETS // Enable the Preset Color menu option + #if ENABLED(LED_COLOR_PRESETS) + #define LED_USER_PRESET_RED 255 // User defined RED value + #define LED_USER_PRESET_GREEN 128 // User defined GREEN value + #define LED_USER_PRESET_BLUE 0 // User defined BLUE value + #define LED_USER_PRESET_WHITE 255 // User defined WHITE value + #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity + //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup + #endif +#endif // LED_CONTROL_MENU + +#if ENABLED(SDSUPPORT) + + // Some RAMPS and other boards don't detect when an SD card is inserted. You can work + // around this by connecting a push button or single throw switch to the pin defined + // as SD_DETECT_PIN in your board's pins definitions. + // This setting should be disabled unless you are using a push button, pulling the pin to ground. + // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED + + #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished + #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the z enabled so your bed stays in place. + + // Reverse SD sort to show "more recent" files first, according to the card's FAT. + // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #define SDCARD_RATHERRECENTFIRST + + // Add an option in the menu to run all auto#.g files + //#define MENU_ADDAUTOSTART + + /** + * Continue after Power-Loss (Creality3D) + * + * Store the current state to the SD Card at the start of each layer + * during SD printing. If the recovery file is found at boot time, present + * an option on the LCD screen to continue the print from the last-known + * point in the file. + */ + //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif + + /** + * Sort SD file listings in alphabetical order. + * + * With this option enabled, items on SD cards will be sorted + * by name for easier navigation. + * + * By default... + * + * - Use the slowest -but safest- method for sorting. + * - Folders are sorted to the top. + * - The sort key is statically allocated. + * - No added G-code (M34) support. + * - 40 item sorting limit. (Items after the first 40 are unsorted.) + * + * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the + * compiler to calculate the worst-case usage and throw an error if the SRAM + * limit is exceeded. + * + * - SDSORT_USES_RAM provides faster sorting via a static directory buffer. + * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer. + * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) + * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) + */ + //#define SDCARD_SORT_ALPHA + + // SD Card Sorting options + #if ENABLED(SDCARD_SORT_ALPHA) + #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define FOLDER_SORTING -1 // -1=above 0=none 1=below + #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. + #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. + #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. + #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! + #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. + // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM. + #endif + + // This allows hosts to request long names for files and folders with M33 + //#define LONG_FILENAME_HOST_SUPPORT + + // Enable this option to scroll long filenames in the SD card menu + //#define SCROLL_LONG_FILENAMES + + /** + * This option allows you to abort SD printing when any endstop is triggered. + * This feature must be enabled with "M540 S1" or from the LCD menu. + * To have any effect, endstops must be enabled during SD printing. + */ + //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED + + /** + * This option makes it easier to print the same SD Card file again. + * On print completion the LCD Menu will open with the file selected. + * You can just click to start the print, or navigate elsewhere. + */ + //#define SD_REPRINT_LAST_SELECTED_FILE + + /** + * Auto-report SdCard status with M27 S + */ + //#define AUTO_REPORT_SD_STATUS + +#endif // SDSUPPORT + +/** + * Additional options for Graphical Displays + * + * Use the optimizations here to improve printing performance, + * which can be adversely affected by graphical display drawing, + * especially when doing several short moves, and when printing + * on DELTA and SCARA machines. + * + * Some of these options may result in the display lagging behind + * controller events, as there is a trade-off between reliable + * printing performance versus fast display updates. + */ +#if ENABLED(DOGLCD) + // Show SD percentage next to the progress bar + //#define DOGM_SD_PERCENT + + // Enable to save many cycles by drawing a hollow frame on the Info Screen + #define XYZ_HOLLOW_FRAME + + // Enable to save many cycles by drawing a hollow frame on Menu Screens + #define MENU_HOLLOW_FRAME + + // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_BIG_EDIT_FONT + + // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. + // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. + //#define USE_SMALL_INFOFONT + + // Enable this option and reduce the value to optimize screen updates. + // The normal delay is 10µs. Use the lowest value that still gives a reliable display. + //#define DOGM_SPI_DELAY_US 5 + + // Swap the CW/CCW indicators in the graphics overlay + //#define OVERLAY_GFX_REVERSE + + #if ENABLED(U8GLIB_ST7920) + /** + * ST7920-based LCDs can emulate a 16 x 4 character display using + * the ST7920 character-generator for very fast screen updates. + * Enable LIGHTWEIGHT_UI to use this special display mode. + * + * Since LIGHTWEIGHT_UI has limited space, the position and status + * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the + * length of time to display the status message before clearing. + * + * Set STATUS_EXPIRE_SECONDS to zero to never clear the status. + * This will prevent position updates from being displayed. + */ + //#define LIGHTWEIGHT_UI + #if ENABLED(LIGHTWEIGHT_UI) + #define STATUS_EXPIRE_SECONDS 20 + #endif + #endif + +#endif // DOGLCD + +// @section safety + +// The hardware watchdog should reset the microcontroller disabling all outputs, +// in case the firmware gets stuck and doesn't do temperature regulation. +#define USE_WATCHDOG + +#if ENABLED(USE_WATCHDOG) + // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on. + // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset. + // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled. + //#define WATCHDOG_RESET_MANUAL +#endif + +// @section lcd + +/** + * Babystepping enables movement of the axes by tiny increments without changing + * the current position values. This feature is used primarily to adjust the Z + * axis in the first layer of a print in real-time. + * + * Warning: Does not respect endstops! + */ +//#define BABYSTEPPING +#if ENABLED(BABYSTEPPING) + //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! + #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way + #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. + //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. + // Note: Extra time may be added to mitigate controller latency. + //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor +#endif + +// @section extruder + +/** + * Linear Pressure Control v1.5 + * + * Assumption: advance [steps] = k * (delta velocity [steps/s]) + * K=0 means advance disabled. + * + * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions! + * + * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak. + * Larger K values will be needed for flexible filament and greater distances. + * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk) + * print acceleration will be reduced during the affected moves to keep within the limit. + * + * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. + * Mention @Sebastianv650 on GitHub to alert the author of any issues. + */ +//#define LIN_ADVANCE +#if ENABLED(LIN_ADVANCE) + #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + //#define LA_DEBUG // If enabled, this will generate debug information output over USB. +#endif + +// @section leveling + +#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) + // Override the mesh area if the automatic (max) area is too large + //#define MESH_MIN_X MESH_INSET + //#define MESH_MIN_Y MESH_INSET + //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) +#endif + +// @section extras + +// +// G2/G3 Arc Support +// +#define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#if ENABLED(ARC_SUPPORT) + #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment + #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections + //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles + //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes +#endif + +// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes. +//#define BEZIER_CURVE_SUPPORT + +// G38.2 and G38.3 Probe Target +// Set MULTIPLE_PROBING if you want G38 to double touch +//#define G38_PROBE_TARGET +#if ENABLED(G38_PROBE_TARGET) + #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move) +#endif + +// Moves (or segments) with fewer steps than this will be joined with the next move +#define MIN_STEPS_PER_SEGMENT 6 + +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 + +// @section temperature + +// Control heater 0 and heater 1 in parallel. +//#define HEATERS_PARALLEL + +//=========================================================================== +//================================= Buffers ================================= +//=========================================================================== + +// @section hidden + +// The number of linear motions that can be in the plan at any give time. +// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. +#if ENABLED(SDSUPPORT) + #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller +#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer +#endif + +// @section serial + +// The ASCII buffer for serial input +#define MAX_CMD_SIZE 96 +#define BUFSIZE 4 + +// Transmission to Host Buffer Size +// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0. +// To buffer a simple "ok" you need 4 bytes. +// For ADVANCED_OK (M105) you need 32 bytes. +// For debug-echo: 128 bytes for the optimal speed. +// Other output doesn't need to be that speedy. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256] +#define TX_BUFFER_SIZE 0 + +// Host Receive Buffer Size +// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough. +// To use flow control, set this buffer size to at least 1024 bytes. +// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048] +//#define RX_BUFFER_SIZE 1024 + +#if RX_BUFFER_SIZE >= 1024 + // Enable to have the controller send XON/XOFF control characters to + // the host to signal the RX buffer is becoming full. + //#define SERIAL_XON_XOFF +#endif + +#if ENABLED(SDSUPPORT) + // Enable this option to collect and display the maximum + // RX queue usage after transferring a file to SD. + //#define SERIAL_STATS_MAX_RX_QUEUED + + // Enable this option to collect and display the number + // of dropped bytes after a file transfer to SD. + //#define SERIAL_STATS_DROPPED_RX +#endif + +// Enable an emergency-command parser to intercept certain commands as they +// enter the serial receive buffer, so they cannot be blocked. +// Currently handles M108, M112, M410 +// Does not work on boards using AT90USB (USBCON) processors! +//#define EMERGENCY_PARSER + +// Bad Serial-connections can miss a received command by sending an 'ok' +// Therefore some clients abort after 30 seconds in a timeout. +// Some other clients start sending commands while receiving a 'wait'. +// This "wait" is only sent when the buffer is empty. 1 second is a good value here. +//#define NO_TIMEOUTS 1000 // Milliseconds + +// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. +//#define ADVANCED_OK + +// @section extras + +/** + * Firmware-based and LCD-controlled retract + * + * Add G10 / G11 commands for automatic firmware-based retract / recover. + * Use M207 and M208 to define parameters for retract / recover. + * + * Use M209 to enable or disable auto-retract. + * With auto-retract enabled, all G1 E moves within the set range + * will be converted to firmware-based retract/recover moves. + * + * Be sure to turn off auto-retract during filament change. + * + * Note that M207 / M208 / M209 settings are saved to EEPROM. + * + */ +//#define FWRETRACT // ONLY PARTIALLY TESTED +#if ENABLED(FWRETRACT) + #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over + #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion + #define RETRACT_LENGTH 3 // Default retract length (positive mm) + #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change + #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s) + #define RETRACT_ZLIFT 0 // Default retract Z-lift + #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering) + #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change) + #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s) + #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s) +#endif + +/** + * Extra Fan Speed + * Adds a secondary fan speed for each print-cooling fan. + * 'M106 P T3-255' : Set a secondary speed for + * 'M106 P T2' : Use the set secondary speed + * 'M106 P T1' : Restore the previous fan speed + */ +//#define EXTRA_FAN_SPEED + +/** + * Advanced Pause + * Experimental feature for filament change support and for parking the nozzle when paused. + * Adds the GCode M600 for initiating filament change. + * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle. + * + * Requires an LCD display. + * Requires NOZZLE_PARK_FEATURE. + * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. + */ +//#define ADVANCED_PAUSE_FEATURE +#if ENABLED(ADVANCED_PAUSE_FEATURE) + #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. + #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + // This short retract is done immediately, before parking the nozzle. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + // Set to 0 for manual unloading. + #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. + #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. + // 0 to disable start loading and skip to fast load only + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + // For Bowden, the full length of the tube and nozzle. + // For direct drive, the full length of the nozzle. + //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. + #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. + #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + // Set to 0 for manual extrusion. + // Filament can be extruded repeatedly from the Filament Change menu + // until extrusion is consistent, and to purge old filament. + + // Filament Unload does a Retract, Delay, and Purge first: + #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. + #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. + + #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. + #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. + + //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + + //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. + //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) +#endif + +// @section tmc + +/** + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper + */ +#if HAS_DRIVER(TMC26X) + + #define X_MAX_CURRENT 1000 // in mA + #define X_SENSE_RESISTOR 91 // in mOhms + #define X_MICROSTEPS 16 // number of microsteps + + #define X2_MAX_CURRENT 1000 + #define X2_SENSE_RESISTOR 91 + #define X2_MICROSTEPS 16 + + #define Y_MAX_CURRENT 1000 + #define Y_SENSE_RESISTOR 91 + #define Y_MICROSTEPS 16 + + #define Y2_MAX_CURRENT 1000 + #define Y2_SENSE_RESISTOR 91 + #define Y2_MICROSTEPS 16 + + #define Z_MAX_CURRENT 1000 + #define Z_SENSE_RESISTOR 91 + #define Z_MICROSTEPS 16 + + #define Z2_MAX_CURRENT 1000 + #define Z2_SENSE_RESISTOR 91 + #define Z2_MICROSTEPS 16 + + #define E0_MAX_CURRENT 1000 + #define E0_SENSE_RESISTOR 91 + #define E0_MICROSTEPS 16 + + #define E1_MAX_CURRENT 1000 + #define E1_SENSE_RESISTOR 91 + #define E1_MICROSTEPS 16 + + #define E2_MAX_CURRENT 1000 + #define E2_SENSE_RESISTOR 91 + #define E2_MICROSTEPS 16 + + #define E3_MAX_CURRENT 1000 + #define E3_SENSE_RESISTOR 91 + #define E3_MICROSTEPS 16 + + #define E4_MAX_CURRENT 1000 + #define E4_SENSE_RESISTOR 91 + #define E4_MICROSTEPS 16 + +#endif // TMC26X + +// @section tmc_smart + +/** + * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to + * the hardware SPI interface on your board and define the required CS pins + * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). + * You may also use software SPI if you wish to use general purpose IO pins. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * To use the reading capabilities, also connect #_SERIAL_RX_PIN + * to PDN_UART without a resistor. + * The drivers can also be used with hardware serial. + * + * You'll also need the TMC2208Stepper Arduino library + * (https://github.com/teemuatlut/TMC2208Stepper). + */ +#if HAS_TRINAMIC + + #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 + #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current + #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256 + + #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current. + #define X_MICROSTEPS 16 // 0..256 + + #define Y_CURRENT 800 + #define Y_MICROSTEPS 16 + + #define Z_CURRENT 800 + #define Z_MICROSTEPS 16 + + #define X2_CURRENT 800 + #define X2_MICROSTEPS 16 + + #define Y2_CURRENT 800 + #define Y2_MICROSTEPS 16 + + #define Z2_CURRENT 800 + #define Z2_MICROSTEPS 16 + + #define E0_CURRENT 800 + #define E0_MICROSTEPS 16 + + #define E1_CURRENT 800 + #define E1_MICROSTEPS 16 + + #define E2_CURRENT 800 + #define E2_MICROSTEPS 16 + + #define E3_CURRENT 800 + #define E3_MICROSTEPS 16 + + #define E4_CURRENT 800 + #define E4_MICROSTEPS 16 + + /** + * Use software SPI for TMC2130. + * The default SW SPI pins are defined the respective pins files, + * but you can override or define them here. + */ + //#define TMC_USE_SW_SPI + //#define TMC_SW_MOSI -1 + //#define TMC_SW_MISO -1 + //#define TMC_SW_SCK -1 + + /** + * Use Trinamic's ultra quiet stepping mode. + * When disabled, Marlin will use spreadCycle stepping mode. + */ + #define STEALTHCHOP + + /** + * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions, + * like overtemperature and short to ground. TMC2208 requires hardware serial. + * In the case of overtemperature Marlin can decrease the driver current until error condition clears. + * Other detected conditions can be used to stop the current print. + * Relevant g-codes: + * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given. + * M911 - Report stepper driver overtemperature pre-warn condition. + * M912 - Clear stepper driver overtemperature pre-warn condition flag. + * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG) + */ + //#define MONITOR_DRIVER_STATUS + + #if ENABLED(MONITOR_DRIVER_STATUS) + #define CURRENT_STEP_DOWN 50 // [mA] + #define REPORT_CURRENT_CHANGE + #define STOP_ON_ERROR + #endif + + /** + * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD. + * This mode allows for faster movements at the expense of higher noise levels. + * STEALTHCHOP needs to be enabled. + * M913 X/Y/Z/E to live tune the setting + */ + //#define HYBRID_THRESHOLD + + #define X_HYBRID_THRESHOLD 100 // [mm/s] + #define X2_HYBRID_THRESHOLD 100 + #define Y_HYBRID_THRESHOLD 100 + #define Y2_HYBRID_THRESHOLD 100 + #define Z_HYBRID_THRESHOLD 3 + #define Z2_HYBRID_THRESHOLD 3 + #define E0_HYBRID_THRESHOLD 30 + #define E1_HYBRID_THRESHOLD 30 + #define E2_HYBRID_THRESHOLD 30 + #define E3_HYBRID_THRESHOLD 30 + #define E4_HYBRID_THRESHOLD 30 + + /** + * Use stallGuard2 to sense an obstacle and trigger an endstop. + * You need to place a wire from the driver's DIAG1 pin to the X/Y endstop pin. + * X, Y, and Z homing will always be done in spreadCycle mode. + * + * X/Y/Z_HOMING_SENSITIVITY is used for tuning the trigger sensitivity. + * Higher values make the system LESS sensitive. + * Lower value make the system MORE sensitive. + * Too low values can lead to false positives, while too high values will collide the axis without triggering. + * It is advised to set X/Y/Z_HOME_BUMP_MM to 0. + * M914 X/Y/Z to live tune the setting + */ + //#define SENSORLESS_HOMING // TMC2130 only + + #if ENABLED(SENSORLESS_HOMING) + #define X_HOMING_SENSITIVITY 8 + #define Y_HOMING_SENSITIVITY 8 + #define Z_HOMING_SENSITIVITY 8 + #endif + + /** + * Enable M122 debugging command for TMC stepper drivers. + * M122 S0/1 will enable continous reporting. + */ + //#define TMC_DEBUG + + /** + * M915 Z Axis Calibration + * + * - Adjust Z stepper current, + * - Drive the Z axis to its physical maximum, and + * - Home Z to account for the lost steps. + * + * Use M915 Snn to specify the current. + * Use M925 Znn to add extra Z height to Z_MAX_POS. + */ + //#define TMC_Z_CALIBRATION + #if ENABLED(TMC_Z_CALIBRATION) + #define CALIBRATION_CURRENT 250 + #define CALIBRATION_EXTRA_HEIGHT 10 + #endif + + /** + * You can set your own advanced settings by filling in predefined functions. + * A list of available functions can be found on the library github page + * https://github.com/teemuatlut/TMC2130Stepper + * https://github.com/teemuatlut/TMC2208Stepper + * + * Example: + * #define TMC_ADV() { \ + * stepperX.diag0_temp_prewarn(1); \ + * stepperY.interpolate(0); \ + * } + */ + #define TMC_ADV() { } + +#endif // TMC2130 || TMC2208 + +// @section L6470 + +/** + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 + */ +#if HAS_DRIVER(L6470) + + #define X_MICROSTEPS 16 // number of microsteps + #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off + #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall + + #define X2_MICROSTEPS 16 + #define X2_OVERCURRENT 2000 + #define X2_STALLCURRENT 1500 + + #define Y_MICROSTEPS 16 + #define Y_OVERCURRENT 2000 + #define Y_STALLCURRENT 1500 + + #define Y2_MICROSTEPS 16 + #define Y2_OVERCURRENT 2000 + #define Y2_STALLCURRENT 1500 + + #define Z_MICROSTEPS 16 + #define Z_OVERCURRENT 2000 + #define Z_STALLCURRENT 1500 + + #define Z2_MICROSTEPS 16 + #define Z2_OVERCURRENT 2000 + #define Z2_STALLCURRENT 1500 + + #define E0_MICROSTEPS 16 + #define E0_OVERCURRENT 2000 + #define E0_STALLCURRENT 1500 + + #define E1_MICROSTEPS 16 + #define E1_OVERCURRENT 2000 + #define E1_STALLCURRENT 1500 + + #define E2_MICROSTEPS 16 + #define E2_OVERCURRENT 2000 + #define E2_STALLCURRENT 1500 + + #define E3_MICROSTEPS 16 + #define E3_OVERCURRENT 2000 + #define E3_STALLCURRENT 1500 + + #define E4_MICROSTEPS 16 + #define E4_OVERCURRENT 2000 + #define E4_STALLCURRENT 1500 + +#endif // L6470 + +/** + * TWI/I2C BUS + * + * This feature is an EXPERIMENTAL feature so it shall not be used on production + * machines. Enabling this will allow you to send and receive I2C data from slave + * devices on the bus. + * + * ; Example #1 + * ; This macro send the string "Marlin" to the slave device with address 0x63 (99) + * ; It uses multiple M260 commands with one B arg + * M260 A99 ; Target slave address + * M260 B77 ; M + * M260 B97 ; a + * M260 B114 ; r + * M260 B108 ; l + * M260 B105 ; i + * M260 B110 ; n + * M260 S1 ; Send the current buffer + * + * ; Example #2 + * ; Request 6 bytes from slave device with address 0x63 (99) + * M261 A99 B5 + * + * ; Example #3 + * ; Example serial output of a M261 request + * echo:i2c-reply: from:99 bytes:5 data:hello + */ + +// @section i2cbus + +//#define EXPERIMENTAL_I2CBUS +#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave + +// @section extras + +/** + * Spindle & Laser control + * + * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and + * to set spindle speed, spindle direction, and laser power. + * + * SuperPid is a router/spindle speed controller used in the CNC milling community. + * Marlin can be used to turn the spindle on and off. It can also be used to set + * the spindle speed from 5,000 to 30,000 RPM. + * + * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V + * hardware PWM pin for the speed control and a pin for the rotation direction. + * + * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details. + */ +//#define SPINDLE_LASER_ENABLE +#if ENABLED(SPINDLE_LASER_ENABLE) + + #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed + #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power + #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower + #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power + #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop + #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction + #define SPINDLE_INVERT_DIR false + #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction + + /** + * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power + * + * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT + * where PWM duty cycle varies from 0 to 255 + * + * set the following for your controller (ALL MUST BE SET) + */ + + #define SPEED_POWER_SLOPE 118.4 + #define SPEED_POWER_INTERCEPT 0 + #define SPEED_POWER_MIN 5000 + #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM + + //#define SPEED_POWER_SLOPE 0.3922 + //#define SPEED_POWER_INTERCEPT 0 + //#define SPEED_POWER_MIN 10 + //#define SPEED_POWER_MAX 100 // 0-100% +#endif + +/** + * Filament Width Sensor + * + * Measures the filament width in real-time and adjusts + * flow rate to compensate for any irregularities. + * + * Also allows the measured filament diameter to set the + * extrusion rate, so the slicer only has to specify the + * volume. + * + * Only a single extruder is supported at this time. + * + * 34 RAMPS_14 : Analog input 5 on the AUX2 connector + * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E) + * 301 RAMBO : Analog input 3 + * + * Note: May require analog pins to be defined for other boards. + */ +//#define FILAMENT_WIDTH_SENSOR + +#if ENABLED(FILAMENT_WIDTH_SENSOR) + #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4] + #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber + + #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it + #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM. + + #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially + + // Display filament width on the LCD status line. Status messages will expire after 5 seconds. + //#define FILAMENT_LCD_DISPLAY +#endif + +/** + * CNC Coordinate Systems + * + * Enables G53 and G54-G59.3 commands to select coordinate systems + * and G92.1 to reset the workspace to native machine space. + */ +//#define CNC_COORDINATE_SYSTEMS + +/** + * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins + */ +//#define PINS_DEBUGGING + +/** + * Auto-report temperatures with M155 S + */ +#define AUTO_REPORT_TEMPERATURES + +/** + * Include capabilities in M115 output + */ +#define EXTENDED_CAPABILITIES_REPORT + +/** + * Disable all Volumetric extrusion options + */ +//#define NO_VOLUMETRICS + +#if DISABLED(NO_VOLUMETRICS) + /** + * Volumetric extrusion default state + * Activate to make volumetric extrusion the default method, + * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter. + * + * M200 D0 to disable, M200 Dn to set a new diameter. + */ + //#define VOLUMETRIC_DEFAULT_ON +#endif + +/** + * Enable this option for a leaner build of Marlin that removes all + * workspace offsets, simplifying coordinate transformations, leveling, etc. + * + * - M206 and M428 are disabled. + * - G92 will revert to its behavior from Marlin 1.0. + */ +//#define NO_WORKSPACE_OFFSETS + +/** + * Set the number of proportional font spaces required to fill up a typical character space. + * This can help to better align the output of commands like `G29 O` Mesh Output. + * + * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0. + * Otherwise, adjust according to your client and font. + */ +#define PROPORTIONAL_FONT_RATIO 1.0 + +/** + * Spend 28 bytes of SRAM to optimize the GCode parser + */ +#define FASTER_GCODE_PARSER + +/** + * User-defined menu items that execute custom GCode + */ +//#define CUSTOM_USER_MENUS +#if ENABLED(CUSTOM_USER_MENUS) + #define USER_SCRIPT_DONE "M117 User Script Done" + #define USER_SCRIPT_AUDIBLE_FEEDBACK + //#define USER_SCRIPT_RETURN // Return to status screen after a script + + #define USER_DESC_1 "Home & UBL Info" + #define USER_GCODE_1 "G28\nG29 W" + + #define USER_DESC_2 "Preheat for PLA" + #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + + #define USER_DESC_3 "Preheat for ABS" + #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + + #define USER_DESC_4 "Heat Bed/Home/Level" + #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + + #define USER_DESC_5 "Home & Info" + #define USER_GCODE_5 "G28\nM503" +#endif + +/** + * Specify an action command to send to the host when the printer is killed. + * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_KILL "poweroff" + +/** + * Specify an action command to send to the host on pause and resume. + * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. + * The host must be configured to handle the action command. + */ +//#define ACTION_ON_PAUSE "pause" +//#define ACTION_ON_RESUME "resume" + +//=========================================================================== +//====================== I2C Position Encoder Settings ====================== +//=========================================================================== + +/** + * I2C position encoders for closed loop control. + * Developed by Chris Barr at Aus3D. + * + * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder + * Github: https://github.com/Aus3D/MagneticEncoder + * + * Supplier: http://aus3d.com.au/magnetic-encoder-module + * Alternative Supplier: http://reliabuild3d.com/ + * + * Reilabuild encoders have been modified to improve reliability. + */ + +//#define I2C_POSITION_ENCODERS +#if ENABLED(I2C_POSITION_ENCODERS) + + #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5 + // encoders supported currently. + + #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200. + #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS. + #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or- + // I2CPE_ENC_TYPE_ROTARY. + #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for + // 1mm poles. For linear encoders this is ticks / mm, + // for rotary encoders this is ticks / revolution. + //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper + // steps per full revolution (motor steps/rev * microstepping) + //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel. + #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction. + #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the + // printer will attempt to correct the error; errors + // smaller than this are ignored to minimize effects of + // measurement noise / latency (filter). + + #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2. + #define I2CPE_ENC_2_AXIS Y_AXIS + #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_ENC_2_TICKS_UNIT 2048 + //#define I2CPE_ENC_2_TICKS_REV (16 * 200) + //#define I2CPE_ENC_2_INVERT + #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP + #define I2CPE_ENC_2_EC_THRESH 0.10 + + #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options + #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below. + + #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4. + #define I2CPE_ENC_4_AXIS E_AXIS + + #define I2CPE_ENC_5_ADDR 34 // Encoder 5. + #define I2CPE_ENC_5_AXIS E_AXIS + + // Default settings for encoders which are enabled, but without settings configured above. + #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR + #define I2CPE_DEF_ENC_TICKS_UNIT 2048 + #define I2CPE_DEF_TICKS_REV (16 * 200) + #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE + #define I2CPE_DEF_EC_THRESH 0.1 + + //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given + // axis after which the printer will abort. Comment out to + // disable abort behaviour. + + #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault + // for this amount of time (in ms) before the encoder + // is trusted again. + + /** + * Position is checked every time a new command is executed from the buffer but during long moves, + * this setting determines the minimum update time between checks. A value of 100 works well with + * error rolling average when attempting to correct only for skips and not for vibration. + */ + #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks. + + // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise. + #define I2CPE_ERR_ROLLING_AVERAGE + +#endif // I2C_POSITION_ENCODERS + +/** + * MAX7219 Debug Matrix + * + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. + */ +//#define MAX7219_DEBUG +#if ENABLED(MAX7219_DEBUG) + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 + /** + * Sample debug features + * If you add more debug displays, be careful to avoid conflicts! + */ + #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row + + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row + // If you experience stuttering, reboots, etc. this option can reveal how + // tweaks made to the configuration are affecting the printer in real-time. +#endif + +/** + * NanoDLP Sync support + * + * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp" + * string to enable synchronization with DLP projector exposure. This change will allow to use + * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands + */ +//#define NANODLP_Z_SYNC +#if ENABLED(NANODLP_Z_SYNC) + //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move. + // Default behaviour is limited to Z axis only. +#endif + +// @section Mechaduino + +#if ENABLED(MECHADUINO_I2C_COMMANDS) + #define EXPERIMENTAL_I2CBUS + #define I2C_SLAVE_ADDRESS 0 // Do not act as a slave + #if ENABLED(HANGPRINTER) + #define A_IS_MECHADUINO + #define B_IS_MECHADUINO + #define C_IS_MECHADUINO + #define D_IS_MECHADUINO + #define A_MOTOR_I2C_ADDR 0x0A + #define B_MOTOR_I2C_ADDR 0x0B + #define C_MOTOR_I2C_ADDR 0x0C + #define D_MOTOR_I2C_ADDR 0x0D + #define A_INVERT_REPORTED_ANGLE false // Angle reports from Mechaduino encoder sent via i2c are used by + #define B_INVERT_REPORTED_ANGLE false // M114 S1 + #define C_INVERT_REPORTED_ANGLE false // which is used in Hangprinter auto anchor localization + #define D_INVERT_REPORTED_ANGLE false + #else + #define X_IS_MECHADUINO + #define Y_IS_MECHADUINO + #define Z_IS_MECHADUINO + #define X_MOTOR_I2C_ADDR 0x0A + #define Y_MOTOR_I2C_ADDR 0x0B + #define Z_MOTOR_I2C_ADDR 0x0C + #define X_INVERT_REPORTED_ANGLE false + #define Y_INVERT_REPORTED_ANGLE false + #define Z_INVERT_REPORTED_ANGLE false + #endif + //#define E_IS_MECHADUINO + //#define E_MOTOR_I2C_ADDR 0x0E + //#define E_INVERT_REPORTED_ANGLE false +#endif + +#if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) || ENABLED(MECHADUINO_I2C_COMMANDS) + // 1/16 microstepping on 200 step/rev motor gives 16*200=3200 microsteps/rev + #define STEPS_PER_MOTOR_REVOLUTION 3200 +#endif + +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + +#endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/makibox/Configuration.h b/Marlin/example_configurations/makibox/Configuration.h index 5ce9ad5746..d845442184 100644 --- a/Marlin/example_configurations/makibox/Configuration.h +++ b/Marlin/example_configurations/makibox/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 1 #define TEMP_SENSOR_1 0 @@ -440,15 +442,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -525,10 +532,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -596,6 +646,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -646,6 +706,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -721,10 +782,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -748,6 +809,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -786,9 +848,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1033,8 +1092,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1324,11 +1383,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1356,19 +1415,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1395,6 +1441,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1459,12 +1514,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1482,40 +1543,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1524,28 +1551,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1553,39 +1558,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1632,6 +1626,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1652,25 +1723,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1686,6 +1743,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1701,6 +1765,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1760,7 +1852,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1825,9 +1917,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/makibox/Configuration_adv.h b/Marlin/example_configurations/makibox/Configuration_adv.h index 04de024b5e..756a972eba 100644 --- a/Marlin/example_configurations/makibox/Configuration_adv.h +++ b/Marlin/example_configurations/makibox/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration.h b/Marlin/example_configurations/tvrrug/Round2/Configuration.h index 74f3ab7c8f..448b0c3ebb 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 5 #define TEMP_SENSOR_1 0 @@ -426,15 +428,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -511,10 +518,53 @@ #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -588,6 +638,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -638,6 +698,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -713,10 +774,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -740,6 +801,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 15 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -778,9 +840,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR true -// Enable this option for Toshiba stepper drivers -#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1025,8 +1084,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1316,11 +1375,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1348,19 +1407,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1387,6 +1433,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1451,12 +1506,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1474,40 +1535,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1516,28 +1543,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1545,39 +1550,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1624,6 +1618,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1644,25 +1715,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1678,6 +1735,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1693,6 +1757,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1752,7 +1844,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1817,9 +1909,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h index 28baaaa1e2..96b3d776dc 100644 --- a/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h +++ b/Marlin/example_configurations/tvrrug/Round2/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -493,9 +526,6 @@ // Include a page of printer information in the LCD Main Menu //#define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -564,6 +594,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -782,10 +816,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -953,23 +1023,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1020,34 +1079,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1055,22 +1096,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1218,32 +1244,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1595,27 +1608,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1633,4 +1648,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/example_configurations/wt150/Configuration.h b/Marlin/example_configurations/wt150/Configuration.h index 9fd1916e7e..6a66cbc140 100644 --- a/Marlin/example_configurations/wt150/Configuration.h +++ b/Marlin/example_configurations/wt150/Configuration.h @@ -37,7 +37,7 @@ */ #ifndef CONFIGURATION_H #define CONFIGURATION_H -#define CONFIGURATION_H_VERSION 010107 +#define CONFIGURATION_H_VERSION 010109 //=========================================================================== //============================= Getting Started ============================= @@ -87,7 +87,7 @@ * by the standard Marlin logo with version number and web URL. * * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. + * respectfully request that you retain the unmodified Marlin boot screen. */ // Enable to show the bitmap in Marlin/_Bootscreen.h on startup. @@ -201,11 +201,11 @@ /** * "Mixing Extruder" - * - Adds a new code, M165, to set the current mix factors. + * - Adds G-codes M163 and M164 to set and "commit" the current mix factors. * - Extends the stepping routines to move multiple steppers in proportion to the mix. - * - Optional support for Repetier Firmware M163, M164, and virtual extruder. - * - This implementation supports only a single extruder. - * - Enable DIRECT_MIXING_IN_G1 for Pia Taubert's reference implementation + * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools. + * - This implementation supports up to two mixing extruders. + * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation). */ //#define MIXING_EXTRUDER #if ENABLED(MIXING_EXTRUDER) @@ -259,6 +259,7 @@ * * Temperature sensors available: * + * -4 : thermocouple with AD8495 * -3 : thermocouple with MAX31855 (only for sensor 0) * -2 : thermocouple with MAX6675 (only for sensor 0) * -1 : thermocouple with AD595 @@ -268,6 +269,7 @@ * 3 : Mendel-parts thermistor (4.7k pullup) * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !! * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup) + * 501 : 100K Zonestar (Tronxy X3A) Thermistor * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup) * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup) * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup) @@ -299,7 +301,7 @@ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below. * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below. * - * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } + * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ #define TEMP_SENSOR_0 -2 #define TEMP_SENSOR_1 0 @@ -442,15 +444,20 @@ // @section extruder -// This option prevents extrusion if the temperature is below EXTRUDE_MINTEMP. -// It also enables the M302 command to set the minimum extrusion temperature -// or to allow moving the extruder regardless of the hotend temperature. -// *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** +/** + * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP. + * Add M302 to set the minimum extrusion temperature and/or turn + * cold extrusion prevention on and off. + * + * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** + */ #define PREVENT_COLD_EXTRUSION #define EXTRUDE_MINTEMP 170 -// This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. -// Note that for Bowden Extruders a too-small value here may prevent loading. +/** + * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH. + * Note: For Bowden Extruders make this large enough to allow load/unload. + */ #define PREVENT_LENGTHY_EXTRUDE #define EXTRUDE_MAXLENGTH 200 @@ -519,18 +526,61 @@ #endif // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). -#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. -#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. #define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +/** + * Stepper Drivers + * + * These settings allow Marlin to tune stepper driver timing and enable advanced options for + * stepper drivers that support them. You may also override timing options in Configuration_adv.h. + * + * A4988 is assumed for unspecified drivers. + * + * Options: A4988, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100, + * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE, + * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE, + * TMC5130, TMC5130_STANDALONE + * :['A4988', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE'] + */ +//#define X_DRIVER_TYPE A4988 +//#define Y_DRIVER_TYPE A4988 +//#define Z_DRIVER_TYPE A4988 +//#define X2_DRIVER_TYPE A4988 +//#define Y2_DRIVER_TYPE A4988 +//#define Z2_DRIVER_TYPE A4988 +//#define E0_DRIVER_TYPE A4988 +//#define E1_DRIVER_TYPE A4988 +//#define E2_DRIVER_TYPE A4988 +//#define E3_DRIVER_TYPE A4988 +//#define E4_DRIVER_TYPE A4988 + // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE +/** + * Endstop Noise Filter + * + * Enable this option if endstops falsely trigger due to noise. + * NOTE: Enabling this feature means adds an error of +/-0.2mm, so homing + * will end up at a slightly different position on each G28. This will also + * reduce accuracy of some bed probes. + * For mechanical switches, the better approach to reduce noise is to install + * a 100 nanofarads ceramic capacitor in parallel with the switch, making it + * essentially noise-proof without sacrificing accuracy. + * This option also increases MCU load when endstops or the probe are enabled. + * So this is not recommended. USE AT YOUR OWN RISK. + * (This feature is not required for common micro-switches mounted on PCBs + * based on the Makerbot design, since they already include the 100nF capacitor.) + */ +//#define ENDSTOP_NOISE_FILTER + //============================================================================= //============================== Movement Settings ============================ //============================================================================= @@ -598,6 +648,16 @@ #define DEFAULT_ZJERK 0.3 #define DEFAULT_EJERK 5.0 +/** + * S-Curve Acceleration + * + * This option eliminates vibration during printing by fitting a Bézier + * curve to move acceleration, producing much smoother direction changes. + * + * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained + */ +//#define S_CURVE_ACCELERATION + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -648,6 +708,7 @@ * or (with LCD_BED_LEVELING) the LCD controller. */ //#define PROBE_MANUALLY +//#define MANUAL_PROBE_START_Z 0.2 /** * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. @@ -723,10 +784,10 @@ // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 -// Speed for the first approach when double-probing (MULTIPLE_PROBING == 2) +// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2) #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z -// Speed for the "accurate" probe of each point +// Feedrate (mm/m) for the "accurate" probe of each point #define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2) // The number of probes to perform at each point. @@ -750,6 +811,7 @@ */ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points +#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes //#define Z_AFTER_PROBING 5 // Z position after probing is done #define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping @@ -788,9 +850,6 @@ #define INVERT_Y_DIR false #define INVERT_Z_DIR false -// Enable this option for Toshiba stepper drivers -//#define CONFIG_STEPPERS_TOSHIBA - // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. @@ -1035,8 +1094,8 @@ #endif /** - * Use the LCD controller for bed leveling - * Requires MESH_BED_LEVELING or PROBE_MANUALLY + * Add a bed leveling sub-menu for ABL or MBL. + * Include a guided procedure if manual probing is enabled. */ //#define LCD_BED_LEVELING @@ -1326,11 +1385,11 @@ * * Select the language to display on the LCD. These languages are available: * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test + * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, + * eu, fi, fr, fr_utf8, gl, hr, it, kana, kana_utf8, nl, pl, pt, + * pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, tr, uk, zh_CN, zh_TW, test * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } + * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', 'test':'TEST' } */ #define LCD_LANGUAGE en @@ -1358,19 +1417,6 @@ */ #define DISPLAY_CHARSET_HD44780 JAPANESE -/** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ -//#define ULTRA_LCD // Character based -//#define DOGLCD // Full graphics display - /** * SD CARD * @@ -1397,6 +1443,15 @@ */ //#define SD_CHECK_AND_RETRY +/** + * LCD Menu Items + * + * Disable all menus and only display the Status Screen, or + * just remove some extraneous menu items to recover space. + */ +//#define NO_LCD_MENUS +//#define SLIM_LCD_MENUS + // // ENCODER SETTINGS // @@ -1461,12 +1516,18 @@ //#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2 //#define LCD_FEEDBACK_FREQUENCY_HZ 5000 +//============================================================================= +//======================== LCD / Controller Selection ========================= +//======================== (Character-based LCDs) ========================= +//============================================================================= + // -// CONTROLLER TYPE: Standard +// RepRapDiscount Smart Controller. +// http://reprap.org/wiki/RepRapDiscount_Smart_Controller // -// Marlin supports a wide variety of controllers. -// Enable one of the following options to specify your controller. +// Note: Usually sold with a white PCB. // +//#define REPRAP_DISCOUNT_SMART_CONTROLLER // // ULTIMAKER Controller. @@ -1484,40 +1545,6 @@ // //#define PANEL_ONE -// -// MaKr3d Makr-Panel with graphic controller and SD support. -// http://reprap.org/wiki/MaKr3d_MaKrPanel -// -//#define MAKRPANEL - -// -// ReprapWorld Graphical LCD -// https://reprapworld.com/?products_details&products_id/1218 -// -//#define REPRAPWORLD_GRAPHICAL_LCD - -// -// Activate one of these if you have a Panucatt Devices -// Viki 2.0 or mini Viki with Graphic LCD -// http://panucatt.com -// -//#define VIKI2 -//#define miniVIKI - -// -// Adafruit ST7565 Full Graphic Controller. -// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ -// -//#define ELB_FULL_GRAPHIC_CONTROLLER - -// -// RepRapDiscount Smart Controller. -// http://reprap.org/wiki/RepRapDiscount_Smart_Controller -// -// Note: Usually sold with a white PCB. -// -//#define REPRAP_DISCOUNT_SMART_CONTROLLER - // // GADGETS3D G3D LCD/SD Controller // http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel @@ -1526,28 +1553,6 @@ // //#define G3D_PANEL -// -// RepRapDiscount FULL GRAPHIC Smart Controller -// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller -// -#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - -// -// MakerLab Mini Panel with graphic -// controller and SD support - http://reprap.org/wiki/Mini_panel -// -//#define MINIPANEL - -// -// RepRapWorld REPRAPWORLD_KEYPAD v1.1 -// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 -// -// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key -// is pressed, a value of 10.0 means 10mm per click. -// -//#define REPRAPWORLD_KEYPAD -//#define REPRAPWORLD_KEYPAD_MOVE_STEP 1.0 - // // RigidBot Panel V1.0 // http://www.inventapart.com/ @@ -1555,39 +1560,28 @@ //#define RIGIDBOT_PANEL // -// BQ LCD Smart Controller shipped by -// default with the BQ Hephestos 2 and Witbox 2. +// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller +// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html // -//#define BQ_LCD_SMART_CONTROLLER +//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 // -// Cartesio UI -// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface -// -//#define CARTESIO_UI - -// -// ANET and Tronxy Controller supported displays. +// ANET and Tronxy 20x4 Controller // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. // This LCD is known to be susceptible to electrical interference // which scrambles the display. Pressing any button clears it up. // This is a LCD2004 display with 5 analog buttons. -//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// +// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD. +// +//#define ULTRA_LCD -// -// LCD for Melzi Card with Graphical LCD -// -//#define LCD_FOR_MELZI - -// -// LCD for Malyan M200 printers. -// This requires SDSUPPORT to be enabled -// -//#define MALYAN_LCD +//============================================================================= +//======================== LCD / Controller Selection ========================= +//===================== (I2C and Shift-Register LCDs) ===================== +//============================================================================= // // CONTROLLER TYPE: I2C @@ -1634,6 +1628,83 @@ // //#define LCD_I2C_VIKI +// +// CONTROLLER TYPE: Shift register panels +// + +// +// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH +// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD +// +//#define SAV_3DLCD + +//============================================================================= +//======================= LCD / Controller Selection ======================= +//========================= (Graphical LCDs) ======================== +//============================================================================= + +// +// CONTROLLER TYPE: Graphical 128x64 (DOGM) +// +// IMPORTANT: The U8glib library is required for Graphical Display! +// https://github.com/olikraus/U8glib_Arduino +// + +// +// RepRapDiscount FULL GRAPHIC Smart Controller +// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller +// +#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER + +// +// ReprapWorld Graphical LCD +// https://reprapworld.com/?products_details&products_id/1218 +// +//#define REPRAPWORLD_GRAPHICAL_LCD + +// +// Activate one of these if you have a Panucatt Devices +// Viki 2.0 or mini Viki with Graphic LCD +// http://panucatt.com +// +//#define VIKI2 +//#define miniVIKI + +// +// MakerLab Mini Panel with graphic +// controller and SD support - http://reprap.org/wiki/Mini_panel +// +//#define MINIPANEL + +// +// MaKr3d Makr-Panel with graphic controller and SD support. +// http://reprap.org/wiki/MaKr3d_MaKrPanel +// +//#define MAKRPANEL + +// +// Adafruit ST7565 Full Graphic Controller. +// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/ +// +//#define ELB_FULL_GRAPHIC_CONTROLLER + +// +// BQ LCD Smart Controller shipped by +// default with the BQ Hephestos 2 and Witbox 2. +// +//#define BQ_LCD_SMART_CONTROLLER + +// +// Cartesio UI +// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface +// +//#define CARTESIO_UI + +// +// LCD for Melzi Card with Graphical LCD +// +//#define LCD_FOR_MELZI + // // SSD1306 OLED full graphics generic display // @@ -1654,25 +1725,11 @@ // //#define ULTI_CONTROLLER -// -// CONTROLLER TYPE: Shift register panels -// -// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH -// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD -// -//#define SAV_3DLCD - // // TinyBoy2 128x64 OLED / Encoder Panel // //#define OLED_PANEL_TINYBOY2 -// -// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller -// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html -// -//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602 - // // MKS MINI12864 with graphic controller and SD support // http://reprap.org/wiki/MKS_MINI_12864 @@ -1688,6 +1745,13 @@ // //#define CR10_STOCKDISPLAY +// +// ANET and Tronxy Graphical Controller +// +//#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 + // A clone of the RepRapDiscount full graphics display but with + // different pins/wiring (see pins_ANET_10.h). + // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1703,6 +1767,34 @@ // //#define SILVER_GATE_GLCD_CONTROLLER +//============================================================================= +//============================ Other Controllers ============================ +//============================================================================= + +// +// CONTROLLER TYPE: Standalone / Serial +// + +// +// LCD for Malyan M200 printers. +// This requires SDSUPPORT to be enabled +// +//#define MALYAN_LCD + +// +// CONTROLLER TYPE: Keypad / Add-on +// + +// +// RepRapWorld REPRAPWORLD_KEYPAD v1.1 +// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626 +// +// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key +// is pressed, a value of 10.0 means 10mm per click. +// +//#define REPRAPWORLD_KEYPAD +//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 + //============================================================================= //=============================== Extra Features ============================== //============================================================================= @@ -1762,7 +1854,7 @@ * For Neopixel LED an overall brightness parameter is also available. * * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, + * LED Strips require a MOSFET Chip between PWM lines and LEDs, * as the Arduino cannot handle the current the LEDs will require. * Failure to follow this precaution can destroy your Arduino! * NOTE: A separate 5V power supply is required! The Neopixel LED needs @@ -1827,9 +1919,7 @@ // If the servo can't reach the requested position, increase it. #define SERVO_DELAY { 300 } -// Servo deactivation -// -// With this option servos are powered only during movement, then turned off to prevent jitter. +// Only power servos during movement, otherwise leave off to prevent jitter //#define DEACTIVATE_SERVOS_AFTER_MOVE #endif // CONFIGURATION_H diff --git a/Marlin/example_configurations/wt150/Configuration_adv.h b/Marlin/example_configurations/wt150/Configuration_adv.h index 5acc34536c..1aa252bef5 100644 --- a/Marlin/example_configurations/wt150/Configuration_adv.h +++ b/Marlin/example_configurations/wt150/Configuration_adv.h @@ -32,7 +32,7 @@ */ #ifndef CONFIGURATION_ADV_H #define CONFIGURATION_ADV_H -#define CONFIGURATION_ADV_H_VERSION 010107 +#define CONFIGURATION_ADV_H_VERSION 010109 // @section temperature @@ -182,10 +182,12 @@ // @section temperature -//These defines help to calibrate the AD595 sensor in case you get wrong temperature measurements. -//The measured temperature is defined as "actualTemp = (measuredTemp * TEMP_SENSOR_AD595_GAIN) + TEMP_SENSOR_AD595_OFFSET" -#define TEMP_SENSOR_AD595_OFFSET 0.0 -#define TEMP_SENSOR_AD595_GAIN 1.0 +// Calibration for AD595 / AD8495 sensor to adjust temperature measurements. +// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET. +#define TEMP_SENSOR_AD595_OFFSET 0.0 +#define TEMP_SENSOR_AD595_GAIN 1.0 +#define TEMP_SENSOR_AD8495_OFFSET 0.0 +#define TEMP_SENSOR_AD8495_GAIN 1.0 /** * Controller Fan @@ -206,10 +208,20 @@ // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) //#define FAN_KICKSTART_TIME 100 -// This defines the minimal speed for the main fan, run in PWM mode -// to enable uncomment and set minimal PWM speed for reliable running (1-255) -// if fan speed is [1 - (FAN_MIN_PWM-1)] it is set to FAN_MIN_PWM +/** + * PWM Fan Scaling + * + * Define the min/max speeds for PWM fans (as set with M106). + * + * With these options the M106 0-255 value range is scaled to a subset + * to ensure that the fan has enough power to spin, or to run lower + * current fans with higher current. (e.g., 5V/12V fans with 12V/24V) + * Value 0 always turns off the fan. + * + * Define one or both of these to override the default 0-255 range. + */ //#define FAN_MIN_PWM 50 +//#define FAN_MAX_PWM 128 // @section extruder @@ -319,15 +331,20 @@ #endif #endif -// Enable this for dual x-carriage printers. -// A dual x-carriage design has the advantage that the inactive extruder can be parked which -// prevents hot-end ooze contaminating the print. It also reduces the weight of each x-carriage -// allowing faster printing speeds. Connect your X2 stepper to the first unused E plug. +/** + * Dual X Carriage + * + * This setup has two X carriages that can move independently, each with its own hotend. + * The carriages can be used to print an object with two colors or materials, or in + * "duplication mode" it can print two identical or X-mirrored objects simultaneously. + * The inactive carriage is parked automatically to prevent oozing. + * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis. + * By default the X2 stepper is assigned to the first unused E plug on the board. + */ //#define DUAL_X_CARRIAGE #if ENABLED(DUAL_X_CARRIAGE) - // Configuration for second X-carriage - // Note: the first x-carriage is defined as the x-carriage which homes to the minimum endstop; - // the second x-carriage always homes to the maximum endstop. + #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage + #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position @@ -429,8 +446,24 @@ // if unwanted behavior is observed on a user's machine when running at very slow speeds. #define MINIMUM_PLANNER_SPEED 0.05 // (mm/sec) +// +// Use Junction Deviation instead of traditional Jerk Limiting +// +//#define JUNCTION_DEVIATION +#if ENABLED(JUNCTION_DEVIATION) + #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge +#endif + +/** + * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies + * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible + * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the + * lowest stepping frequencies. + */ +//#define ADAPTIVE_STEP_SMOOTHING + // Microstep setting (Only functional when stepper driver microstep pins are connected to MCU. -#define MICROSTEP_MODES {16,16,16,16,16} // [1,2,4,8,16] +#define MICROSTEP_MODES { 16, 16, 16, 16, 16 } // [1,2,4,8,16] /** * @section stepper motor current @@ -494,9 +527,6 @@ // Include a page of printer information in the LCD Main Menu #define LCD_INFO_MENU -// Leave out seldom-used LCD menu items to recover some Program Memory -//#define SLIM_LCD_MENUS - // Scroll a longer status message into view //#define STATUS_MESSAGE_SCROLLING @@ -565,6 +595,10 @@ * point in the file. */ //#define POWER_LOSS_RECOVERY + #if ENABLED(POWER_LOSS_RECOVERY) + //#define POWER_LOSS_PIN 44 // Pin to detect power loss + //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss + #endif /** * Sort SD file listings in alphabetical order. @@ -783,10 +817,46 @@ // Moves (or segments) with fewer steps than this will be joined with the next move #define MIN_STEPS_PER_SEGMENT 6 -// The minimum pulse width (in µs) for stepping a stepper. -// Set this if you find stepping unreliable, or if using a very fast CPU. -// 0 is OK for AVR, 0 is OK for A4989 drivers, 2 is needed for DRV8825 drivers -#define MINIMUM_STEPPER_PULSE 2 +/** + * Minimum delay after setting the stepper DIR (in ns) + * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire) + * 20 : Minimum for TMC2xxx drivers + * 200 : Minimum for A4988 drivers + * 500 : Minimum for LV8729 drivers (guess, no info in datasheet) + * 650 : Minimum for DRV8825 drivers + * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet) + * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet) + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_DIR_DELAY 650 + +/** + * Minimum stepper driver pulse width (in µs) + * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers + * 1 : Minimum for A4988 stepper drivers + * 1 : Minimum for LV8729 stepper drivers + * 2 : Minimum for DRV8825 stepper drivers + * 3 : Minimum for TB6600 stepper drivers + * 30 : Minimum for TB6560 stepper drivers + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MINIMUM_STEPPER_PULSE 2 + +/** + * Maximum stepping rate (in Hz) the stepper driver allows + * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE) + * 500000 : Maximum for A4988 stepper driver + * 400000 : Maximum for TMC2xxx stepper drivers + * 250000 : Maximum for DRV8825 stepper driver + * 150000 : Maximum for TB6600 stepper driver + * 130000 : Maximum for LV8729 stepper driver + * 15000 : Maximum for TB6560 stepper driver + * + * Override the default value based on the driver type set in Configuration.h. + */ +//#define MAXIMUM_STEPPER_RATE 250000 // @section temperature @@ -954,23 +1024,12 @@ // @section tmc /** - * Enable this section if you have TMC26X motor drivers. - * You will need to import the TMC26XStepper library into the Arduino IDE for this - * (https://github.com/trinamic/TMC26XStepper.git) + * TMC26X Stepper Driver options + * + * The TMC26XStepper library is required for this stepper driver. + * https://github.com/trinamic/TMC26XStepper */ -//#define HAVE_TMC26X -#if ENABLED(HAVE_TMC26X) // Choose your axes here. This is mandatory! - //#define X_IS_TMC26X - //#define X2_IS_TMC26X - //#define Y_IS_TMC26X - //#define Y2_IS_TMC26X - //#define Z_IS_TMC26X - //#define Z2_IS_TMC26X - //#define E0_IS_TMC26X - //#define E1_IS_TMC26X - //#define E2_IS_TMC26X - //#define E3_IS_TMC26X - //#define E4_IS_TMC26X +#if HAS_DRIVER(TMC26X) #define X_MAX_CURRENT 1000 // in mA #define X_SENSE_RESISTOR 91 // in mOhms @@ -1021,35 +1080,16 @@ // @section tmc_smart /** - * Enable this for SilentStepStick Trinamic TMC2130 SPI-configurable stepper drivers. - * - * You'll also need the TMC2130Stepper Arduino library - * (https://github.com/teemuatlut/TMC2130Stepper). - * * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to * the hardware SPI interface on your board and define the required CS pins * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.). * You may also use software SPI if you wish to use general purpose IO pins. - */ -//#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) - // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif - -/** - * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. - * Connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. + * + * You'll also need the TMC2130Stepper Arduino library + * (https://github.com/teemuatlut/TMC2130Stepper). + * + * To use TMC2208 stepper UART-configurable stepper drivers + * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor. * To use the reading capabilities, also connect #_SERIAL_RX_PIN * to PDN_UART without a resistor. * The drivers can also be used with hardware serial. @@ -1057,22 +1097,7 @@ * You'll also need the TMC2208Stepper Arduino library * (https://github.com/teemuatlut/TMC2208Stepper). */ -//#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2208 - //#define X2_IS_TMC2208 - //#define Y_IS_TMC2208 - //#define Y2_IS_TMC2208 - //#define Z_IS_TMC2208 - //#define Z2_IS_TMC2208 - //#define E0_IS_TMC2208 - //#define E1_IS_TMC2208 - //#define E2_IS_TMC2208 - //#define E3_IS_TMC2208 - //#define E4_IS_TMC2208 -#endif - -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) +#if HAS_TRINAMIC #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1220,32 +1245,19 @@ * stepperY.interpolate(0); \ * } */ - #define TMC_ADV() { } + #define TMC_ADV() { } #endif // TMC2130 || TMC2208 // @section L6470 /** - * Enable this section if you have L6470 motor drivers. - * You need to import the L6470 library into the Arduino IDE for this. - * (https://github.com/ameyer/Arduino-L6470) + * L6470 Stepper Driver options + * + * The Arduino-L6470 library is required for this stepper driver. + * https://github.com/ameyer/Arduino-L6470 */ - -//#define HAVE_L6470DRIVER -#if ENABLED(HAVE_L6470DRIVER) - - //#define X_IS_L6470 - //#define X2_IS_L6470 - //#define Y_IS_L6470 - //#define Y2_IS_L6470 - //#define Z_IS_L6470 - //#define Z2_IS_L6470 - //#define E0_IS_L6470 - //#define E1_IS_L6470 - //#define E2_IS_L6470 - //#define E3_IS_L6470 - //#define E4_IS_L6470 +#if HAS_DRIVER(L6470) #define X_MICROSTEPS 16 // number of microsteps #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off @@ -1597,27 +1609,29 @@ /** * MAX7219 Debug Matrix * - * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip, which can be used as a status - * display. Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. - * - * Fully assembled MAX7219 boards can be found on the internet for under $2(US). - * For example, see https://www.ebay.com/sch/i.html?_nkw=332349290049 + * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display. + * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage. */ //#define MAX7219_DEBUG #if ENABLED(MAX7219_DEBUG) - #define MAX7219_CLK_PIN 64 // 77 on Re-ARM // Configuration of the 3 pins to control the display - #define MAX7219_DIN_PIN 57 // 78 on Re-ARM - #define MAX7219_LOAD_PIN 44 // 79 on Re-ARM + #define MAX7219_CLK_PIN 64 + #define MAX7219_DIN_PIN 57 + #define MAX7219_LOAD_PIN 44 + //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix + #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral) + #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain. + #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°) + // connector at: right=0 bottom=-90 top=90 left=180 /** * Sample debug features * If you add more debug displays, be careful to avoid conflicts! */ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning - #define MAX7219_DEBUG_STEPPER_HEAD 3 // Show the stepper queue head position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_TAIL 5 // Show the stepper queue tail position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row - #define MAX7219_DEBUG_STEPPER_QUEUE 0 // Show the current stepper queue depth on this and the next LED matrix row + #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row // If you experience stuttering, reboots, etc. this option can reveal how // tweaks made to the configuration are affecting the printer in real-time. #endif @@ -1635,4 +1649,7 @@ // Default behaviour is limited to Z axis only. #endif +// Enable Marlin dev mode which adds some special commands +//#define MARLIN_DEV_MODE + #endif // CONFIGURATION_ADV_H diff --git a/Marlin/fastio_1280.h b/Marlin/fastio_1280.h index b95ddffbad..09bac1fd11 100644 --- a/Marlin/fastio_1280.h +++ b/Marlin/fastio_1280.h @@ -23,8 +23,9 @@ /** * Pin mapping for the 1280 and 2560 * - * Logical Pin: 22 23 24 25 26 27 28 29 53 52 51 50 10 11 12 13 37 36 35 34 33 32 31 30 21 20 19 18 81 82 83 38 00 01 78 05 02 03 79 80 54 55 56 57 58 59 60 61 41 40 39 71 70 04 17 16 84 06 07 08 09 85 15 14 72 73 75 76 77 74 62 63 64 65 66 67 68 69 49 48 47 46 45 44 43 42 - * Port: A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5 H0 H1 H2 H3 H4 H5 H6 H7 J0 J1 J2 J3 J4 J5 J6 J7 K0 K1 K2 K3 K4 K5 K6 K7 L0 L1 L2 L3 L4 L5 L6 L7 + * Hardware Pin : 02 03 06 07 01 05 15 16 17 18 23 24 25 26 64 63 13 12 46 45 44 43 78 77 76 75 74 73 72 71 60 59 58 57 56 55 54 53 50 70 52 51 42 41 40 39 38 37 36 35 22 21 20 19 97 96 95 94 93 92 91 90 89 88 87 86 85 84 83 82 04 08 09 10 11 14 27 28 29 30 31 32 33 34 47 48 49 61 62 65 66 67 68 69 79 80 81 98 99 100 + * Port : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx + * Logical Pin : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx xx */ #ifndef _FASTIO_1280 diff --git a/Marlin/fwretract.cpp b/Marlin/fwretract.cpp index 997e49a7f9..7723fcd1cd 100644 --- a/Marlin/fwretract.cpp +++ b/Marlin/fwretract.cpp @@ -123,7 +123,7 @@ void FWRetract::retract(const bool retracting #endif } SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); - SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_AXIS]); + SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_CART]); SERIAL_ECHOLNPAIR("hop_amount ", hop_amount); //*/ @@ -131,7 +131,7 @@ void FWRetract::retract(const bool retracting renormalize = RECIPROCAL(planner.e_factor[active_extruder]), base_retract = swapping ? swap_retract_length : retract_length, old_z = current_position[Z_AXIS], - old_e = current_position[E_AXIS]; + old_e = current_position[E_CART]; // The current position will be the destination for E and Z moves set_destination_from_current(); @@ -139,7 +139,7 @@ void FWRetract::retract(const bool retracting if (retracting) { // Retract by moving from a faux E position back to the current E position feedrate_mm_s = retract_feedrate_mm_s; - destination[E_AXIS] -= base_retract * renormalize; + destination[E_CART] -= base_retract * renormalize; prepare_move_to_destination(); // set_current_to_destination // Is a Z hop set, and has the hop not yet been done? @@ -160,14 +160,14 @@ void FWRetract::retract(const bool retracting hop_amount = 0.0; // Clear the hop amount } - destination[E_AXIS] += (base_retract + (swapping ? swap_retract_recover_length : retract_recover_length)) * renormalize; + destination[E_CART] += (base_retract + (swapping ? swap_retract_recover_length : retract_recover_length)) * renormalize; feedrate_mm_s = swapping ? swap_retract_recover_feedrate_mm_s : retract_recover_feedrate_mm_s; prepare_move_to_destination(); // Recover E, set_current_to_destination } feedrate_mm_s = old_feedrate_mm_s; // Restore original feedrate current_position[Z_AXIS] = old_z; // Restore Z and E positions - current_position[E_AXIS] = old_e; + current_position[E_CART] = old_e; SYNC_PLAN_POSITION_KINEMATIC(); // As if the move never took place retracted[active_extruder] = retracting; // Active extruder now retracted / recovered @@ -190,7 +190,7 @@ void FWRetract::retract(const bool retracting #endif } SERIAL_ECHOLNPAIR("current_position[z] ", current_position[Z_AXIS]); - SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_AXIS]); + SERIAL_ECHOLNPAIR("current_position[e] ", current_position[E_CART]); SERIAL_ECHOLNPAIR("hop_amount ", hop_amount); //*/ diff --git a/Marlin/language.h b/Marlin/language.h index f16c7242ae..d0eea744ad 100644 --- a/Marlin/language.h +++ b/Marlin/language.h @@ -149,23 +149,23 @@ #define MSG_RESEND "Resend: " #define MSG_UNKNOWN_COMMAND "Unknown command: \"" #define MSG_ACTIVE_EXTRUDER "Active Extruder: " -#define MSG_X_MIN "x_min: " -#define MSG_X_MAX "x_max: " -#define MSG_X2_MIN "x2_min: " -#define MSG_X2_MAX "x2_max: " -#define MSG_Y_MIN "y_min: " -#define MSG_Y_MAX "y_max: " -#define MSG_Y2_MIN "y2_min: " -#define MSG_Y2_MAX "y2_max: " -#define MSG_Z_MIN "z_min: " -#define MSG_Z_MAX "z_max: " -#define MSG_Z2_MIN "z2_min: " -#define MSG_Z2_MAX "z2_max: " -#define MSG_Z_PROBE "z_probe: " +#define MSG_X_MIN "x_min" +#define MSG_X_MAX "x_max" +#define MSG_X2_MIN "x2_min" +#define MSG_X2_MAX "x2_max" +#define MSG_Y_MIN "y_min" +#define MSG_Y_MAX "y_max" +#define MSG_Y2_MIN "y2_min" +#define MSG_Y2_MAX "y2_max" +#define MSG_Z_MIN "z_min" +#define MSG_Z_MAX "z_max" +#define MSG_Z2_MIN "z2_min" +#define MSG_Z2_MAX "z2_max" +#define MSG_Z_PROBE "z_probe" +#define MSG_FILAMENT_RUNOUT_SENSOR "filament" #define MSG_PROBE_Z_OFFSET "Probe Z Offset" #define MSG_SKEW_MIN "min_skew_factor: " #define MSG_SKEW_MAX "max_skew_factor: " -#define MSG_FILAMENT_RUNOUT_SENSOR "filament: " #define MSG_ERR_MATERIAL_INDEX "M145 S out of range (0-1)" #define MSG_ERR_M355_NONE "No case light" #define MSG_ERR_M421_PARAMETERS "M421 incorrect parameter usage" diff --git a/Marlin/language_an.h b/Marlin/language_an.h index fe766d1211..679ed1cf3f 100644 --- a/Marlin/language_an.h +++ b/Marlin/language_an.h @@ -44,6 +44,7 @@ #define MSG_AUTO_HOME_X _UxGT("Orichen X") #define MSG_AUTO_HOME_Y _UxGT("Orichen Y") #define MSG_AUTO_HOME_Z _UxGT("Orichen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Orichen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Encetar (pretar)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Vinient punto") diff --git a/Marlin/language_bg.h b/Marlin/language_bg.h index 8edeed405f..5920bac25f 100644 --- a/Marlin/language_bg.h +++ b/Marlin/language_bg.h @@ -41,6 +41,7 @@ #define MSG_AUTOSTART _UxGT("Автостарт") #define MSG_DISABLE_STEPPERS _UxGT("Изкл. двигатели") #define MSG_AUTO_HOME _UxGT("Паркиране") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровка Z") #define MSG_SET_HOME_OFFSETS _UxGT("Задай Начало") #define MSG_SET_ORIGIN _UxGT("Изходна точка") #define MSG_PREHEAT_1 _UxGT("Подгряване PLA") diff --git a/Marlin/language_ca.h b/Marlin/language_ca.h index 7aa5f00298..8c8af7c308 100644 --- a/Marlin/language_ca.h +++ b/Marlin/language_ca.h @@ -47,6 +47,7 @@ #define MSG_AUTO_HOME_X _UxGT("X a origen") #define MSG_AUTO_HOME_Y _UxGT("Y a origen") #define MSG_AUTO_HOME_Z _UxGT("Z a origen") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Premeu per iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Següent punt") diff --git a/Marlin/language_cn.h b/Marlin/language_cn.h index 96c6f666d5..f02a23acab 100644 --- a/Marlin/language_cn.h +++ b/Marlin/language_cn.h @@ -40,6 +40,7 @@ #define MSG_AUTOSTART "\xb1\xb2\xb3\xb4" #define MSG_DISABLE_STEPPERS "\xb5\xb6\xb7\xb8\xb9\xba" #define MSG_AUTO_HOME "\xbb\xbc\xbd" +#define MSG_TMC_Z_CALIBRATION "Calibrate Z" #define MSG_LEVEL_BED_HOMING "Homing XYZ" #define MSG_LEVEL_BED_WAITING "Click to Begin" #define MSG_LEVEL_BED_DONE "Leveling Done!" diff --git a/Marlin/language_cz.h b/Marlin/language_cz.h index 3002390b38..950b58a172 100644 --- a/Marlin/language_cz.h +++ b/Marlin/language_cz.h @@ -50,6 +50,7 @@ #define MSG_AUTO_HOME_X _UxGT("Domu osa X") #define MSG_AUTO_HOME_Y _UxGT("Domu osa Y") #define MSG_AUTO_HOME_Z _UxGT("Domu osa Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovat Z") #define MSG_LEVEL_BED_HOMING _UxGT("Mereni podlozky") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutim spustte") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Dalsi bod") diff --git a/Marlin/language_cz_utf8.h b/Marlin/language_cz_utf8.h index f962d41a80..e76c947e48 100644 --- a/Marlin/language_cz_utf8.h +++ b/Marlin/language_cz_utf8.h @@ -44,6 +44,7 @@ #define MSG_SD_INSERTED _UxGT("Karta vložena") #define MSG_SD_REMOVED _UxGT("Karta vyjmuta") #define MSG_LCD_ENDSTOPS _UxGT("Endstopy") // max 8 znaku +#define MSG_LCD_SOFT_ENDSTOPS _UxGT("Soft Endstopy") #define MSG_MAIN _UxGT("Hlavní nabídka") #define MSG_AUTOSTART _UxGT("Autostart") #define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory") @@ -53,6 +54,7 @@ #define MSG_AUTO_HOME_X _UxGT("Domů osa X") #define MSG_AUTO_HOME_Y _UxGT("Domů osa Y") #define MSG_AUTO_HOME_Z _UxGT("Domů osa Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovat Z") #define MSG_LEVEL_BED_HOMING _UxGT("Měření podložky") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Další bod") @@ -252,11 +254,13 @@ #define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk") #define MSG_RESUME_PRINT _UxGT("Obnovit tisk") #define MSG_STOP_PRINT _UxGT("Zastavit tisk") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Obnova vypadku") #define MSG_CARD_MENU _UxGT("Tisknout z SD") #define MSG_NO_CARD _UxGT("Žádná SD karta") #define MSG_DWELL _UxGT("Uspáno...") #define MSG_USERWAIT _UxGT("Čekání na uživ...") #define MSG_PRINT_PAUSED _UxGT("Tisk pozastaven") +#define MSG_PRINTING _UxGT("Tisknu...") #define MSG_PRINT_ABORTED _UxGT("Tisk zrušen") #define MSG_NO_MOVE _UxGT("Žádný pohyb.") #define MSG_KILLED _UxGT("PŘERUSENO. ") @@ -292,8 +296,10 @@ #define MSG_BABYSTEP_Z _UxGT("Babystep Z") #define MSG_ENDSTOP_ABORT _UxGT("Endstop abort") #define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání") +#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř. podl.") #define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA") #define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ SKOK") +#define MSG_THERMAL_RUNAWAY_BED _UxGT("PODL. TEPL. SKOK") #define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA") #define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA") #define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.") @@ -305,7 +311,9 @@ #define MSG_SHORT_HOUR _UxGT("h") #define MSG_SHORT_MINUTE _UxGT("m") #define MSG_HEATING _UxGT("Zahřívání...") +#define MSG_COOLING _UxGT("Chlazení") #define MSG_BED_HEATING _UxGT("Zahřívání podl...") +#define MSG_BED_COOLING _UxGT("Chlazení podl...") #define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace") #define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X") #define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y") @@ -314,6 +322,7 @@ #define MSG_DELTA_SETTINGS _UxGT("Delta nastavení") #define MSG_DELTA_AUTO_CALIBRATE _UxGT("Autokalibrace") #define MSG_DELTA_HEIGHT_CALIBRATE _UxGT("Nast.výšku delty") +#define MSG_DELTA_Z_OFFSET_CALIBRATE _UxGT("Nast. Z-ofset") #define MSG_DELTA_DIAG_ROD _UxGT("Diag rameno") #define MSG_DELTA_HEIGHT _UxGT("Výška") #define MSG_DELTA_RADIUS _UxGT("Poloměr") diff --git a/Marlin/language_da.h b/Marlin/language_da.h index 1bd2b02df6..e51f8d014a 100644 --- a/Marlin/language_da.h +++ b/Marlin/language_da.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik når du er klar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Næste punkt") diff --git a/Marlin/language_de.h b/Marlin/language_de.h index c662ec25a2..2a28c9145d 100644 --- a/Marlin/language_de.h +++ b/Marlin/language_de.h @@ -50,6 +50,7 @@ #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriere Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klick für Start") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Nächste Koordinate") diff --git a/Marlin/language_el-gr.h b/Marlin/language_el-gr.h index 89ac76eb03..775242bb8f 100644 --- a/Marlin/language_el-gr.h +++ b/Marlin/language_el-gr.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") #define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") #define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") #define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά στο αρχικό σημείο ΧΥΖ") #define MSG_LEVEL_BED_WAITING _UxGT("Κάντε κλικ για να ξεκινήσετε") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") diff --git a/Marlin/language_el.h b/Marlin/language_el.h index 8cfda5a171..b4fe4d37f0 100644 --- a/Marlin/language_el.h +++ b/Marlin/language_el.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Αρχικό σημείο X") #define MSG_AUTO_HOME_Y _UxGT("Αρχικό σημείο Y") #define MSG_AUTO_HOME_Z _UxGT("Αρχικό σημείο Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Βαθμονόμηση Z") #define MSG_LEVEL_BED_HOMING _UxGT("Επαναφορά Επ. Εκτύπωσης") //SHORTEN #define MSG_LEVEL_BED_WAITING _UxGT("Επιπεδοποίηση επ. Εκτύπωσης περιμενει") //SHORTEN #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Επόμενο σημείο") diff --git a/Marlin/language_en.h b/Marlin/language_en.h index 1f5ad92508..c23f4634ae 100644 --- a/Marlin/language_en.h +++ b/Marlin/language_en.h @@ -85,6 +85,9 @@ #ifndef MSG_AUTO_HOME_Z #define MSG_AUTO_HOME_Z _UxGT("Home Z") #endif +#ifndef MSG_TMC_Z_CALIBRATION + #define MSG_TMC_Z_CALIBRATION _UxGT("Calibrate Z") +#endif #ifndef MSG_LEVEL_BED_HOMING #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #endif @@ -1055,6 +1058,9 @@ #ifndef MSG_FILAMENT_CHANGE_INSERT_1 #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Insert and Click") #endif + #ifndef MSG_FILAMENT_CHANGE_HEAT_1 + #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Click to heat") + #endif #ifndef MSG_FILAMENT_CHANGE_HEATING_1 #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Heating...") #endif diff --git a/Marlin/language_es.h b/Marlin/language_es.h index cbff5ee08e..a4267af2b3 100644 --- a/Marlin/language_es.h +++ b/Marlin/language_es.h @@ -48,6 +48,7 @@ #define MSG_AUTO_HOME_X _UxGT("Origen X") #define MSG_AUTO_HOME_Y _UxGT("Origen Y") #define MSG_AUTO_HOME_Z _UxGT("Origen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto") diff --git a/Marlin/language_es_utf8.h b/Marlin/language_es_utf8.h index 57ac43b82f..a0c87452d9 100644 --- a/Marlin/language_es_utf8.h +++ b/Marlin/language_es_utf8.h @@ -48,6 +48,7 @@ #define MSG_AUTO_HOME_X _UxGT("Origen X") #define MSG_AUTO_HOME_Y _UxGT("Origen Y") #define MSG_AUTO_HOME_Z _UxGT("Origen Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origen XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Iniciar (Presione)") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Siguiente punto") diff --git a/Marlin/language_eu.h b/Marlin/language_eu.h index c28eaa6f94..999855ef37 100644 --- a/Marlin/language_eu.h +++ b/Marlin/language_eu.h @@ -47,6 +47,7 @@ #define MSG_AUTO_HOME_X _UxGT("X jatorrira") #define MSG_AUTO_HOME_Y _UxGT("Y jatorrira") #define MSG_AUTO_HOME_Z _UxGT("Z jatorrira") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibratu Z") #define MSG_LEVEL_BED_HOMING _UxGT("XYZ hasieraratzen") #define MSG_LEVEL_BED_WAITING _UxGT("Klik egin hasteko") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Hurrengo Puntua") diff --git a/Marlin/language_fi.h b/Marlin/language_fi.h index 70ef4cf90a..4e26bdb2b3 100644 --- a/Marlin/language_fi.h +++ b/Marlin/language_fi.h @@ -41,6 +41,7 @@ #define MSG_AUTOSTART _UxGT("Automaatti") #define MSG_DISABLE_STEPPERS _UxGT("Vapauta moottorit") #define MSG_AUTO_HOME _UxGT("Aja referenssiin") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibroi Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Click to Begin") #define MSG_LEVEL_BED_DONE _UxGT("Leveling Done!") diff --git a/Marlin/language_fr.h b/Marlin/language_fr.h index 20d542433a..1990800394 100644 --- a/Marlin/language_fr.h +++ b/Marlin/language_fr.h @@ -47,6 +47,7 @@ #define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") #define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") #define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") @@ -58,20 +59,20 @@ #define MSG_PREHEAT_1 _UxGT("Prechauffage PLA") #define MSG_PREHEAT_1_N _UxGT("Prechauff. PLA ") #define MSG_PREHEAT_1_ALL _UxGT("Prech. PLA Tout") -#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" fini") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") #define MSG_PREHEAT_1_BEDONLY _UxGT("Prech. PLA lit") #define MSG_PREHEAT_1_SETTINGS _UxGT("Regl. prech. PLA") #define MSG_PREHEAT_2 _UxGT("Prechauffage ABS") #define MSG_PREHEAT_2_N _UxGT("Prechauff. ABS ") #define MSG_PREHEAT_2_ALL _UxGT("Prech. ABS Tout") -#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" fini") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") #define MSG_PREHEAT_2_BEDONLY _UxGT("Prech. ABS lit") #define MSG_PREHEAT_2_SETTINGS _UxGT("Regl. prech. ABS") #define MSG_COOLDOWN _UxGT("Refroidir") #define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") #define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.") #define MSG_EXTRUDE _UxGT("Extrusion") -#define MSG_RETRACT _UxGT("Retrait") +#define MSG_RETRACT _UxGT("Retraction") #define MSG_MOVE_AXIS _UxGT("Deplacer un axe") #define MSG_BED_LEVELING _UxGT("Regl. Niv. lit") #define MSG_LEVEL_BED _UxGT("Regl. Niv. lit") @@ -112,10 +113,10 @@ #define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Valider maille perso") #define MSG_UBL_CONTINUE_MESH _UxGT("Continuer maille") #define MSG_UBL_MESH_LEVELING _UxGT("Niveau par maille") -#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau a 3 points") -#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau grille") +#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("Niveau en 3 points") +#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Niveau par grille") #define MSG_UBL_MESH_LEVEL _UxGT("Maille de niveau") -#define MSG_UBL_SIDE_POINTS _UxGT("Point lateral") +#define MSG_UBL_SIDE_POINTS _UxGT("Points lateraux") #define MSG_UBL_MAP_TYPE _UxGT("Type de carte") #define MSG_UBL_OUTPUT_MAP _UxGT("Voir maille") #define MSG_UBL_OUTPUT_MAP_HOST _UxGT("Voir pour hote") @@ -145,7 +146,7 @@ #define MSG_LED_CONTROL _UxGT("Controle LED") #define MSG_LEDS _UxGT("Lumiere") -#define MSG_LED_PRESETS _UxGT("Preregl. LED.") +#define MSG_LED_PRESETS _UxGT("Preregl. LED") #define MSG_SET_LEDS_RED _UxGT("Rouge") #define MSG_SET_LEDS_ORANGE _UxGT("Orange") #define MSG_SET_LEDS_YELLOW _UxGT("Jaune") @@ -231,7 +232,7 @@ #define MSG_MOTION _UxGT("Mouvement") #define MSG_FILAMENT _UxGT("Filament") #define MSG_VOLUMETRIC_ENABLED _UxGT("E en mm3") -#define MSG_FILAMENT_DIAM _UxGT("Diam. Fil.") +#define MSG_FILAMENT_DIAM _UxGT("Diam. fil.") #define MSG_FILAMENT_UNLOAD _UxGT("Decharger mm") #define MSG_FILAMENT_LOAD _UxGT("Charger mm") #define MSG_ADVANCE_K _UxGT("Avance K") @@ -241,18 +242,19 @@ #define MSG_RESTORE_FAILSAFE _UxGT("Restaurer defauts") #define MSG_INIT_EEPROM _UxGT("Initialiser EEPROM") #define MSG_REFRESH _UxGT("Actualiser") -#define MSG_WATCH _UxGT("Surveiller") +#define MSG_WATCH _UxGT("Infos") #define MSG_PREPARE _UxGT("Preparer") #define MSG_TUNE _UxGT("Regler") #define MSG_PAUSE_PRINT _UxGT("Interrompre impr.") #define MSG_RESUME_PRINT _UxGT("Reprendre impr.") #define MSG_STOP_PRINT _UxGT("Arreter impr.") +#define MSG_POWER_LOSS_RECOVERY _UxGT("Recup. coupure elec.") #define MSG_CARD_MENU _UxGT("Impr. depuis SD") #define MSG_NO_CARD _UxGT("Pas de carte") -#define MSG_DWELL _UxGT("Repos...") -#define MSG_USERWAIT _UxGT("Atten. de l'util.") +#define MSG_DWELL _UxGT("Veille...") +#define MSG_USERWAIT _UxGT("Clic pour reprendre") #define MSG_PRINT_PAUSED _UxGT("Impr. en pause") -#define MSG_PRINT_ABORTED _UxGT("Impr. Annulee") +#define MSG_PRINT_ABORTED _UxGT("Impr. annulee") #define MSG_NO_MOVE _UxGT("Moteurs bloques.") #define MSG_KILLED _UxGT("MORT.") #define MSG_STOPPED _UxGT("STOPPE.") @@ -271,8 +273,8 @@ #define MSG_FILAMENTUNLOAD_ALL _UxGT("Decharger tout") #define MSG_INIT_SDCARD _UxGT("Init. la carte SD") #define MSG_CNG_SDCARD _UxGT("Changer de carte") -#define MSG_ZPROBE_OUT _UxGT("Z sonde hors lit") -#define MSG_SKEW_FACTOR _UxGT("Facteur ecart") +#define MSG_ZPROBE_OUT _UxGT("Sonde Z hors lit") +#define MSG_SKEW_FACTOR _UxGT("Facteur derive") #define MSG_BLTOUCH _UxGT("BLTouch") #define MSG_BLTOUCH_SELFTEST _UxGT("Autotest BLTouch") #define MSG_BLTOUCH_RESET _UxGT("RaZ BLTouch") @@ -313,16 +315,16 @@ #define MSG_DELTA_HEIGHT _UxGT("Hauteur") #define MSG_DELTA_RADIUS _UxGT("Rayon") -#define MSG_INFO_MENU _UxGT("Infos imprimante") +#define MSG_INFO_MENU _UxGT("A propos impr.") #define MSG_INFO_PRINTER_MENU _UxGT("Infos imprimante") -#define MSG_3POINT_LEVELING _UxGT("Niveau a 3 points") +#define MSG_3POINT_LEVELING _UxGT("Niveau en 3 points") #define MSG_LINEAR_LEVELING _UxGT("Niveau lineaire") #define MSG_BILINEAR_LEVELING _UxGT("Niveau bilineaire") #define MSG_UBL_LEVELING _UxGT("Niveau lit unifie") #define MSG_MESH_LEVELING _UxGT("Niveau maillage") #define MSG_INFO_STATS_MENU _UxGT("Stats. imprimante") #define MSG_INFO_BOARD_MENU _UxGT("Infos carte") -#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermistors") +#define MSG_INFO_THERMISTOR_MENU _UxGT("Thermocouples") #define MSG_INFO_EXTRUDERS _UxGT("Extrudeurs") #define MSG_INFO_BAUDRATE _UxGT("Baud") #define MSG_INFO_PROTOCOL _UxGT("Protocole") @@ -348,13 +350,13 @@ #define MSG_INFO_PSU _UxGT("Alimentation") #define MSG_DRIVE_STRENGTH _UxGT("Puiss. moteur ") #define MSG_DAC_PERCENT _UxGT("Driver %") -#define MSG_DAC_EEPROM_WRITE _UxGT("DAC EEPROM sauv.") +#define MSG_DAC_EEPROM_WRITE _UxGT("Sauv. DAC EEPROM") #define MSG_FILAMENT_CHANGE_HEADER_PAUSE _UxGT("IMPR. PAUSE") #define MSG_FILAMENT_CHANGE_HEADER_LOAD _UxGT("CHARGER FIL") #define MSG_FILAMENT_CHANGE_HEADER_UNLOAD _UxGT("DECHARGER FIL") #define MSG_FILAMENT_CHANGE_OPTION_HEADER _UxGT("OPTIONS REPRISE:") -#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger encore") +#define MSG_FILAMENT_CHANGE_OPTION_PURGE _UxGT("Purger plus") #define MSG_FILAMENT_CHANGE_OPTION_RESUME _UxGT("Reprendre impr.") #define MSG_FILAMENT_CHANGE_NOZZLE _UxGT(" Buse: ") #define MSG_ERR_HOMING_FAILED _UxGT("Echec origine") @@ -363,13 +365,13 @@ #if LCD_HEIGHT >= 4 // Up to 3 lines allowed - #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente Demarrage") - #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du filament") - #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("changer") + #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Attente demarrage") + #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("du changement") + #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("de filament") #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Attente de") #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("decharger filament") #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Inserer filament") - #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et app. bouton") + #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("et clic bouton") #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("pour continuer...") #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Presser le bouton...") #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("Pr chauffer la buse") diff --git a/Marlin/language_fr_utf8.h b/Marlin/language_fr_utf8.h index 8365242255..12e841ba8c 100644 --- a/Marlin/language_fr_utf8.h +++ b/Marlin/language_fr_utf8.h @@ -40,7 +40,7 @@ #define MSG_SD_REMOVED _UxGT("Carte retirée") #define MSG_LCD_ENDSTOPS _UxGT("Butées") // Max length 8 characters #define MSG_MAIN _UxGT("Menu principal") -#define MSG_AUTOSTART _UxGT("Demarrage auto") +#define MSG_AUTOSTART _UxGT("Démarrage auto") #define MSG_DISABLE_STEPPERS _UxGT("Arrêter moteurs") #define MSG_DEBUG_MENU _UxGT("Menu debug") #define MSG_PROGRESS_BAR_TEST _UxGT("Test barre progress.") @@ -48,6 +48,7 @@ #define MSG_AUTO_HOME_X _UxGT("Origine X Auto.") #define MSG_AUTO_HOME_Y _UxGT("Origine Y Auto.") #define MSG_AUTO_HOME_Z _UxGT("Origine Z Auto.") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Origine XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Clic pour commencer") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Point suivant") @@ -59,18 +60,18 @@ #define MSG_PREHEAT_1 _UxGT("Préchauffage PLA") #define MSG_PREHEAT_1_N _UxGT("Préchauff. PLA ") #define MSG_PREHEAT_1_ALL _UxGT("Préch. PLA Tout") -#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" fini") +#define MSG_PREHEAT_1_END MSG_PREHEAT_1 _UxGT(" buse") #define MSG_PREHEAT_1_BEDONLY _UxGT("Préch. PLA lit") #define MSG_PREHEAT_1_SETTINGS _UxGT("Régl. prech. PLA") #define MSG_PREHEAT_2 _UxGT("Préchauffage ABS") #define MSG_PREHEAT_2_N _UxGT("Préchauff. ABS ") #define MSG_PREHEAT_2_ALL _UxGT("Préch. ABS Tout") -#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" fini") +#define MSG_PREHEAT_2_END MSG_PREHEAT_2 _UxGT(" buse") #define MSG_PREHEAT_2_BEDONLY _UxGT("Préch. ABS lit") #define MSG_PREHEAT_2_SETTINGS _UxGT("Régl. prech. ABS") #define MSG_COOLDOWN _UxGT("Refroidir") #define MSG_SWITCH_PS_ON _UxGT("Allumer alim.") -#define MSG_SWITCH_PS_OFF _UxGT("Eteindre alim.") +#define MSG_SWITCH_PS_OFF _UxGT("Éteindre alim.") #define MSG_EXTRUDE _UxGT("Extrusion") #define MSG_RETRACT _UxGT("Retrait") #define MSG_MOVE_AXIS _UxGT("Déplacer un axe") @@ -86,9 +87,9 @@ #define MSG_UBL_TOOLS _UxGT("Outils UBL") #define MSG_UBL_LEVEL_BED _UxGT("Niveau lit unifié") #define MSG_UBL_MANUAL_MESH _UxGT("Maillage manuel") -#define MSG_UBL_BC_INSERT _UxGT("Poser câle & mesurer") +#define MSG_UBL_BC_INSERT _UxGT("Poser cale & mesurer") #define MSG_UBL_BC_INSERT2 _UxGT("Mesure") -#define MSG_UBL_BC_REMOVE _UxGT("ôter et mesurer lit") +#define MSG_UBL_BC_REMOVE _UxGT("Ôter et mesurer lit") #define MSG_UBL_MOVING_TO_NEXT _UxGT("Aller au suivant") #define MSG_UBL_ACTIVATE_MESH _UxGT("Activer l'UBL") #define MSG_UBL_DEACTIVATE_MESH _UxGT("Désactiver l'UBL") @@ -96,8 +97,8 @@ #define MSG_UBL_CUSTOM_BED_TEMP MSG_UBL_SET_BED_TEMP #define MSG_UBL_SET_HOTEND_TEMP _UxGT("Température buse") #define MSG_UBL_CUSTOM_HOTEND_TEMP MSG_UBL_SET_HOTEND_TEMP -#define MSG_UBL_MESH_EDIT _UxGT("Editer maille") -#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Editer maille perso") +#define MSG_UBL_MESH_EDIT _UxGT("Éditer maille") +#define MSG_UBL_EDIT_CUSTOM_MESH _UxGT("Éditer maille perso") #define MSG_UBL_FINE_TUNE_MESH _UxGT("Réglage fin maille") #define MSG_UBL_DONE_EDITING_MESH _UxGT("Terminer maille") #define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Créer maille perso") @@ -155,7 +156,7 @@ #define MSG_SET_LEDS_INDIGO _UxGT("Indigo") #define MSG_SET_LEDS_VIOLET _UxGT("Violet") #define MSG_SET_LEDS_WHITE _UxGT("Blanc") -#define MSG_SET_LEDS_DEFAULT _UxGT("Defaut") +#define MSG_SET_LEDS_DEFAULT _UxGT("Défaut") #define MSG_CUSTOM_LEDS _UxGT("Lum. perso.") #define MSG_INTENSITY_R _UxGT("Intensité rouge") #define MSG_INTENSITY_G _UxGT("Intensité vert") diff --git a/Marlin/language_gl.h b/Marlin/language_gl.h index b97a414417..e0524d8df9 100644 --- a/Marlin/language_gl.h +++ b/Marlin/language_gl.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Ir orixe X") #define MSG_AUTO_HOME_Y _UxGT("Ir orixe Y") #define MSG_AUTO_HOME_Z _UxGT("Ir orixe Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Ir orixes XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Prema pulsador") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Seguinte punto") @@ -252,4 +253,3 @@ #endif // LCD_HEIGHT < 4 #endif // LANGUAGE_GL_H - diff --git a/Marlin/language_hr.h b/Marlin/language_hr.h index 3b8fdd7433..efdeae8b5b 100644 --- a/Marlin/language_hr.h +++ b/Marlin/language_hr.h @@ -44,6 +44,7 @@ #define MSG_AUTO_HOME_X _UxGT("Home-aj X") #define MSG_AUTO_HOME_Y _UxGT("Home-aj Y") #define MSG_AUTO_HOME_Z _UxGT("Home-aj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibriraj Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home-aj XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klikni za početak") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sljedeća točka") diff --git a/Marlin/language_it.h b/Marlin/language_it.h index e3b83312bb..306faa3313 100644 --- a/Marlin/language_it.h +++ b/Marlin/language_it.h @@ -47,6 +47,7 @@ #define MSG_AUTO_HOME_X _UxGT("Home asse X") #define MSG_AUTO_HOME_Y _UxGT("Home asse Y") #define MSG_AUTO_HOME_Z _UxGT("Home asse Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibra Z") #define MSG_LEVEL_BED_HOMING _UxGT("Home assi XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Premi per iniziare") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Punto successivo") diff --git a/Marlin/language_kana.h b/Marlin/language_kana.h index 4989ebf1bc..e75be4c210 100644 --- a/Marlin/language_kana.h +++ b/Marlin/language_kana.h @@ -50,6 +50,7 @@ #define MSG_AUTO_HOME_X "X\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Xｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home X") #define MSG_AUTO_HOME_Y "Y\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Yｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Y") #define MSG_AUTO_HOME_Z "Z\xbc\xde\xb8\x20\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7" // "Zｼﾞｸ ｹﾞﾝﾃﾝﾌｯｷ" ("Home Z") +#define MSG_TMC_Z_CALIBRATION "Z\xbc\xde\xb8\x20\xba\xb3\xbe\xb2" // "Zｼﾞｸ ｺｳｾｲ" ("Calibrate Z") #define MSG_LEVEL_BED_HOMING "\xb9\xde\xdd\xc3\xdd\xcc\xaf\xb7\xc1\xad\xb3" // "ｹﾞﾝﾃﾝﾌｯｷﾁｭｳ" ("Homing XYZ") #define MSG_LEVEL_BED_WAITING "\xda\xcd\xde\xd8\xdd\xb8\xde\xb6\xb2\xbc" // "ﾚﾍﾞﾘﾝｸﾞｶｲｼ" ("Click to Begin") #define MSG_LEVEL_BED_NEXT_POINT "\xc2\xb7\xde\xc9\xbf\xb8\xc3\xb2\xc3\xdd\xcd" // "ﾂｷﾞﾉｿｸﾃｲﾃﾝﾍ" ("Next Point") diff --git a/Marlin/language_kana_utf8.h b/Marlin/language_kana_utf8.h index f33432532f..050f3277a7 100644 --- a/Marlin/language_kana_utf8.h +++ b/Marlin/language_kana_utf8.h @@ -53,6 +53,7 @@ #define MSG_AUTO_HOME_X _UxGT("Xジク ゲンテンフッキ") // "Home X" #define MSG_AUTO_HOME_Y _UxGT("Yジク ゲンテンフッキ") // "Home Y" #define MSG_AUTO_HOME_Z _UxGT("Zジク ゲンテンフッキ") // "Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("Zジク コウセイ") // "Calibrate Z" #define MSG_LEVEL_BED_HOMING _UxGT("ゲンテンフッキチュウ") // "Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("レベリングカイシ") // "Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("ツギノソクテイテンヘ") // "Next Point" diff --git a/Marlin/language_nl.h b/Marlin/language_nl.h index 0a2726294d..128bceaf41 100644 --- a/Marlin/language_nl.h +++ b/Marlin/language_nl.h @@ -47,6 +47,7 @@ #define MSG_AUTO_HOME_X _UxGT("Home X") #define MSG_AUTO_HOME_Y _UxGT("Home Y") #define MSG_AUTO_HOME_Z _UxGT("Home Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibreer Z") #define MSG_LEVEL_BED_HOMING _UxGT("Homing XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Klik voor begin") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Volgende Plaats") diff --git a/Marlin/language_pl-DOGM.h b/Marlin/language_pl-DOGM.h index 8210fe51f2..5839325726 100644 --- a/Marlin/language_pl-DOGM.h +++ b/Marlin/language_pl-DOGM.h @@ -39,6 +39,7 @@ #define MSG_AUTO_HOME_X _UxGT("Zeruj X") #define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") #define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibruj Z") #define MSG_LEVEL_BED _UxGT("Poziom. stołu") #define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") diff --git a/Marlin/language_pl-HD44780.h b/Marlin/language_pl-HD44780.h index 6968fc8a37..933b5b9e53 100644 --- a/Marlin/language_pl-HD44780.h +++ b/Marlin/language_pl-HD44780.h @@ -40,6 +40,7 @@ #define MSG_AUTO_HOME_X _UxGT("Zeruj X") #define MSG_AUTO_HOME_Y _UxGT("Zeruj Y") #define MSG_AUTO_HOME_Z _UxGT("Zeruj Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibruj Z") #define MSG_LEVEL_BED _UxGT("Poziom. stolu") #define MSG_LEVEL_BED_HOMING _UxGT("Pozycja zerowa") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknij by rozp.") diff --git a/Marlin/language_pt-br.h b/Marlin/language_pt-br.h index 4d9c64261c..303ea1aaa6 100644 --- a/Marlin/language_pt-br.h +++ b/Marlin/language_pt-br.h @@ -48,6 +48,7 @@ #define MSG_AUTO_HOME_Y _UxGT("Ir na origem Y") #define MSG_AUTO_HOME_Z _UxGT("Ir na origem Z") #define MSG_AUTO_HOME _UxGT("Ir na origem XYZ") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") #define MSG_LEVEL_BED_WAITING _UxGT("Clique para Iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Proximo Ponto") diff --git a/Marlin/language_pt-br_utf8.h b/Marlin/language_pt-br_utf8.h index b297b7b4b0..880b396ff3 100644 --- a/Marlin/language_pt-br_utf8.h +++ b/Marlin/language_pt-br_utf8.h @@ -50,6 +50,7 @@ #define MSG_AUTO_HOME_Y _UxGT("Ir na origem Y") #define MSG_AUTO_HOME_Z _UxGT("Ir na origem Z") #define MSG_AUTO_HOME _UxGT("Ir na origem XYZ") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") #define MSG_LEVEL_BED_WAITING _UxGT("Clique para Iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo Ponto") diff --git a/Marlin/language_pt.h b/Marlin/language_pt.h index c314cc80da..949381142d 100644 --- a/Marlin/language_pt.h +++ b/Marlin/language_pt.h @@ -43,6 +43,7 @@ #define MSG_AUTO_HOME_X "Ir para origem X" #define MSG_AUTO_HOME_Y "Ir para origem Y" #define MSG_AUTO_HOME_Z "Ir para origem Z" +#define MSG_TMC_Z_CALIBRATION "Calibrar Z" #define MSG_LEVEL_BED_HOMING "Indo para origem" #define MSG_LEVEL_BED_WAITING "Click para iniciar" #define MSG_LEVEL_BED_NEXT_POINT "Proximo ponto" diff --git a/Marlin/language_pt_utf8.h b/Marlin/language_pt_utf8.h index df402884fa..0b0113c1d8 100644 --- a/Marlin/language_pt_utf8.h +++ b/Marlin/language_pt_utf8.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Ir para origem X") #define MSG_AUTO_HOME_Y _UxGT("Ir para origem Y") #define MSG_AUTO_HOME_Z _UxGT("Ir para origem Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Calibrar Z") #define MSG_LEVEL_BED_HOMING _UxGT("Indo para origem") #define MSG_LEVEL_BED_WAITING _UxGT("Click para iniciar") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Próximo ponto") diff --git a/Marlin/language_ru.h b/Marlin/language_ru.h index 0e54d6be0c..4a9fc53fe7 100644 --- a/Marlin/language_ru.h +++ b/Marlin/language_ru.h @@ -49,6 +49,7 @@ #define MSG_AUTO_HOME_X _UxGT("Парковка X") #define MSG_AUTO_HOME_Y _UxGT("Парковка Y") #define MSG_AUTO_HOME_Z _UxGT("Парковка Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калибровать Z") #define MSG_LEVEL_BED_HOMING _UxGT("Нулевое положение") #define MSG_LEVEL_BED_WAITING _UxGT("Нажмите чтобы начать") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Следующая точка") diff --git a/Marlin/language_sk_utf8.h b/Marlin/language_sk_utf8.h index 3b43007e54..de3b2ba38b 100644 --- a/Marlin/language_sk_utf8.h +++ b/Marlin/language_sk_utf8.h @@ -53,6 +53,7 @@ #define MSG_AUTO_HOME_X _UxGT("Domov os X") #define MSG_AUTO_HOME_Y _UxGT("Domov os Y") #define MSG_AUTO_HOME_Z _UxGT("Domov os Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Kalibrovať Z") #define MSG_LEVEL_BED_HOMING _UxGT("Meranie podložky") #define MSG_LEVEL_BED_WAITING _UxGT("Kliknutím spusťte") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Ďalší bod") diff --git a/Marlin/language_tr.h b/Marlin/language_tr.h index 9df9f32396..6234d149ac 100644 --- a/Marlin/language_tr.h +++ b/Marlin/language_tr.h @@ -52,6 +52,7 @@ #define MSG_AUTO_HOME_X _UxGT("X Sıfırla") // X Sıfırla #define MSG_AUTO_HOME_Y _UxGT("Y Sıfırla") // Y Sıfırla #define MSG_AUTO_HOME_Z _UxGT("Z Sıfırla") // Z Sıfırla +#define MSG_TMC_Z_CALIBRATION _UxGT("Ayarla Z") // Ayarla Z #define MSG_LEVEL_BED_HOMING _UxGT("XYZ Sıfırlanıyor") // XYZ Sıfırlanıyor #define MSG_LEVEL_BED_WAITING _UxGT("Başlatmak için tıkla") // Başlatmak için tıkla #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Sıradaki Nokta") // Sıradaki Nokta diff --git a/Marlin/language_uk.h b/Marlin/language_uk.h index 3e3227d867..ed71d1a6c5 100644 --- a/Marlin/language_uk.h +++ b/Marlin/language_uk.h @@ -45,6 +45,7 @@ #define MSG_AUTO_HOME_X _UxGT("Паркування X") #define MSG_AUTO_HOME_Y _UxGT("Паркування Y") #define MSG_AUTO_HOME_Z _UxGT("Паркування Z") +#define MSG_TMC_Z_CALIBRATION _UxGT("Калібрування Z") #define MSG_LEVEL_BED_HOMING _UxGT("Паркування XYZ") #define MSG_LEVEL_BED_WAITING _UxGT("Почати") #define MSG_LEVEL_BED_NEXT_POINT _UxGT("Слідуюча Точка") diff --git a/Marlin/language_zh_CN.h b/Marlin/language_zh_CN.h index 3a1a065d5e..214c3459f0 100644 --- a/Marlin/language_zh_CN.h +++ b/Marlin/language_zh_CN.h @@ -46,6 +46,7 @@ #define MSG_AUTO_HOME_X _UxGT("回X原位") //"Home X" #define MSG_AUTO_HOME_Y _UxGT("回Y原位") //"Home Y" #define MSG_AUTO_HOME_Z _UxGT("回Z原位") //"Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校准Z") //"Calibrate Z" #define MSG_LEVEL_BED_HOMING _UxGT("平台调平XYZ归原位") //"Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("单击开始热床调平") //"Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("下个热床调平点") //"Next Point" diff --git a/Marlin/language_zh_TW.h b/Marlin/language_zh_TW.h index 2a0399e358..b5a62a984e 100644 --- a/Marlin/language_zh_TW.h +++ b/Marlin/language_zh_TW.h @@ -46,6 +46,7 @@ #define MSG_AUTO_HOME_X _UxGT("回X原點") //"Home X" #define MSG_AUTO_HOME_Y _UxGT("回Y原點") //"Home Y" #define MSG_AUTO_HOME_Z _UxGT("回Z原點") //"Home Z" +#define MSG_TMC_Z_CALIBRATION _UxGT("⊿校準Z") //"Calibrate Z" #define MSG_LEVEL_BED_HOMING _UxGT("平台調平XYZ歸原點") //"Homing XYZ" #define MSG_LEVEL_BED_WAITING _UxGT("單擊開始熱床調平") //"Click to Begin" #define MSG_LEVEL_BED_NEXT_POINT _UxGT("下個熱床調平點") //"Next Point" diff --git a/Marlin/macros.h b/Marlin/macros.h index 45c4334ae2..a081744f79 100644 --- a/Marlin/macros.h +++ b/Marlin/macros.h @@ -23,13 +23,18 @@ #ifndef MACROS_H #define MACROS_H -#define NUM_AXIS 4 -#define ABCE 4 -#define XYZE 4 -#define ABC 3 -#define XYZ 3 +#define XYZ 3 +#define XYZE 4 +#define ABC 3 +#define ABCD 4 +#define ABCE 4 +#define ABCDE 5 -// For use in macros that take a single axis letter +/** + * For use in macros that take a single axis letter + * The axis order in all axis related arrays is X, Y, Z, E + * For Hangprinter it is A, B, C, D, E + */ #define _AXIS(A) (A##_AXIS) #define _XMIN_ 100 @@ -231,4 +236,4 @@ #define FMOD(x, y) fmodf(x, y) #define HYPOT(x,y) SQRT(HYPOT2(x,y)) -#endif //__MACROS_H +#endif // MACROS_H diff --git a/Marlin/malyanlcd.cpp b/Marlin/malyanlcd.cpp index e8d6c25143..74a5b611d8 100644 --- a/Marlin/malyanlcd.cpp +++ b/Marlin/malyanlcd.cpp @@ -83,6 +83,9 @@ // Track incoming command bytes from the LCD int inbound_count; +// For sending print completion messages +bool last_printing_status = false; + // Everything written needs the high bit set. void write_to_lcd_P(const char * const message) { char encoded_message[MAX_CURLY_COMMAND]; @@ -112,22 +115,23 @@ void write_to_lcd(const char * const message) { * {C:P050} * Set temp for bed to 50 * + * {C:S09} set feedrate to 90 %. + * {C:S12} set feedrate to 120 %. + * * the command portion begins after the : */ void process_lcd_c_command(const char* command) { switch (command[0]) { - case 'T': { - // M104 S - char cmd[20]; - sprintf_P(cmd, PSTR("M104 S%s"), command + 1); - enqueue_and_echo_command_now(cmd); + case 'C': { + int raw_feedrate = atoi(command + 1); + feedrate_percentage = raw_feedrate * 10; + feedrate_percentage = constrain(feedrate_percentage, 10, 999); + } break; + case 'T': { + thermalManager.setTargetHotend(atoi(command + 1), 0); } break; - case 'P': { - // M140 S - char cmd[20]; - sprintf_P(cmd, PSTR("M140 S%s"), command + 1); - enqueue_and_echo_command_now(cmd); + thermalManager.setTargetBed(atoi(command + 1)); } break; default: @@ -246,6 +250,7 @@ void process_lcd_p_command(const char* command) { #if ENABLED(SDSUPPORT) // cancel print write_to_lcd_P(PSTR("{SYS:CANCELING}")); + last_printing_status = false; card.stopSDPrint( #if SD_RESORT true @@ -286,7 +291,7 @@ void process_lcd_p_command(const char* command) { } else { char message_buffer[MAX_CURLY_COMMAND]; - sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.filename); + sprintf_P(message_buffer, PSTR("{PRINTFILE:%s}"), card.longest_filename()); write_to_lcd(message_buffer); write_to_lcd_P(PSTR("{SYS:BUILD}")); card.openAndPrintFile(card.filename); @@ -327,7 +332,7 @@ void process_lcd_s_command(const char* command) { case 'H': // Home all axis - enqueue_and_echo_command("G28", false); + enqueue_and_echo_command("G28"); break; case 'L': { @@ -344,7 +349,7 @@ void process_lcd_s_command(const char* command) { uint16_t file_count = card.get_num_Files(); for (uint16_t i = 0; i < file_count; i++) { card.getfilename(i); - sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.filename); + sprintf_P(message_buffer, card.filenameIsDir ? PSTR("{DIR:%s}") : PSTR("{FILE:%s}"), card.longest_filename()); write_to_lcd(message_buffer); } @@ -439,14 +444,21 @@ void _O2 lcd_update() { } #if ENABLED(SDSUPPORT) - // If there's a print in progress, we need to emit the status as - // {TQ:} - if (card.sdprinting) { - // We also need to send: T:-2538.0 E:0 - // I have no idea what this means. + // The way last printing status works is simple: + // The UI needs to see at least one TQ which is not 100% + // and then when the print is complete, one which is. + static uint8_t last_percent_done = 100; + + // If there was a print in progress, we need to emit the final + // print status as {TQ:100}. Reset last percent done so a new print will + // issue a percent of 0. + const uint8_t percent_done = card.sdprinting ? card.percentDone() : last_printing_status ? 100 : 0; + if (percent_done != last_percent_done) { char message_buffer[10]; - sprintf_P(message_buffer, PSTR("{TQ:%03i}"), card.percentDone()); + sprintf_P(message_buffer, PSTR("{TQ:%03i}"), percent_done); write_to_lcd(message_buffer); + last_percent_done = percent_done; + last_printing_status = card.sdprinting; } #endif } diff --git a/Marlin/nozzle.cpp b/Marlin/nozzle.cpp index 8bff692e44..3e2607c58d 100644 --- a/Marlin/nozzle.cpp +++ b/Marlin/nozzle.cpp @@ -161,9 +161,11 @@ #if ENABLED(NOZZLE_PARK_FEATURE) - void Nozzle::park(const uint8_t &z_action, const point_t &park /*= NOZZLE_PARK_POINT*/) { - const float fr_xy = NOZZLE_PARK_XY_FEEDRATE; - const float fr_z = NOZZLE_PARK_Z_FEEDRATE; + constexpr float npp[] = NOZZLE_PARK_POINT; + static_assert(COUNT(npp) == XYZ, "NOZZLE_PARK_POINT requires X, Y, and Z values."); + + void Nozzle::park(const uint8_t &z_action, const point_t &park/*=NOZZLE_PARK_POINT*/) { + const float fr_xy = NOZZLE_PARK_XY_FEEDRATE, fr_z = NOZZLE_PARK_Z_FEEDRATE; switch (z_action) { case 1: // Go to Z-park height diff --git a/Marlin/parser.h b/Marlin/parser.h index 949c489cd0..6a86ad373e 100644 --- a/Marlin/parser.h +++ b/Marlin/parser.h @@ -90,9 +90,15 @@ public: #endif #if ENABLED(DEBUG_GCODE_PARSER) - void debug(); + static void debug(); #endif + GCodeParser() { + #if ENABLED(INCH_MODE_SUPPORT) + set_input_linear_units(LINEARUNIT_MM); + #endif + } + // Reset is done before parsing static void reset(); diff --git a/Marlin/pca9632.cpp b/Marlin/pca9632.cpp index 2b4ee7f40b..4c339f4604 100644 --- a/Marlin/pca9632.cpp +++ b/Marlin/pca9632.cpp @@ -100,9 +100,9 @@ static void PCA9632_WriteAllRegisters(const byte addr, const byte regadd, const #endif void pca9632_set_led_color(const LEDColor &color) { + Wire.begin(); if (!PCA_init) { PCA_init = 1; - Wire.begin(); PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE1, PCA9632_MODE1_VALUE); PCA9632_WriteRegister(PCA9632_ADDRESS,PCA9632_MODE2, PCA9632_MODE2_VALUE); } diff --git a/Marlin/pins.h b/Marlin/pins.h index 20ba513a56..b32eeb75b9 100644 --- a/Marlin/pins.h +++ b/Marlin/pins.h @@ -696,6 +696,7 @@ // Dual X-carriage, Dual Y, Dual Z support // +#define _D_PINS #define _X2_PINS #define _Y2_PINS #define _Z2_PINS @@ -703,16 +704,64 @@ #define __EPIN(p,q) E##p##_##q##_PIN #define _EPIN(p,q) __EPIN(p,q) +// The HANGPRINTER A, B, C, D axes +#if ENABLED(HANGPRINTER) + #define A_ENABLE_PIN X_ENABLE_PIN + #define A_DIR_PIN X_DIR_PIN + #define A_STEP_PIN X_STEP_PIN + #define A_MS1_PIN X_MS1_PIN + + #define B_ENABLE_PIN Y_ENABLE_PIN + #define B_DIR_PIN Y_DIR_PIN + #define B_STEP_PIN Y_STEP_PIN + #define B_MS1_PIN Y_MS1_PIN + + #define C_ENABLE_PIN Z_ENABLE_PIN + #define C_DIR_PIN Z_DIR_PIN + #define C_STEP_PIN Z_STEP_PIN + #define C_MS1_PIN Z_MS1_PIN + + #ifndef D_STEP_PIN + #define D_STEP_PIN _EPIN(E_STEPPERS, STEP) + #define D_DIR_PIN _EPIN(E_STEPPERS, DIR) + #define D_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE) + #ifndef D_CS_PIN + #define D_CS_PIN _EPIN(E_STEPPERS, CS) + #endif + #ifndef D_MS1_PIN + #define D_MS1_PIN _EPIN(E_STEPPERS, MS1) + #endif + #if E_STEPPERS >= MAX_EXTRUDERS || !PIN_EXISTS(D_ENABLE) + #error "No E stepper plug left for D Axis!" + #endif + #endif + #undef _D_PINS + #define ___D_PINS D_STEP_PIN, D_DIR_PIN, D_ENABLE_PIN, + #ifdef D_CS_PIN + #define __D_PINS ___D_PINS D_CS_PIN, + #else + #define __D_PINS ___D_PINS + #endif + #ifdef D_MS1_PIN + #define _D_PINS __D_PINS D_MS1_PIN, + #else + #define _D_PINS __D_PINS + #endif + #define X2_E_INDEX INCREMENT(E_STEPPERS) +#else + #define X2_E_INDEX E_STEPPERS +#endif + // The X2 axis, if any, should be the next open extruder port #if ENABLED(DUAL_X_CARRIAGE) || ENABLED(X_DUAL_STEPPER_DRIVERS) #ifndef X2_STEP_PIN - #define X2_STEP_PIN _EPIN(E_STEPPERS, STEP) - #define X2_DIR_PIN _EPIN(E_STEPPERS, DIR) - #define X2_ENABLE_PIN _EPIN(E_STEPPERS, ENABLE) + #define X2_STEP_PIN _EPIN(X2_E_INDEX, STEP) + #define X2_DIR_PIN _EPIN(X2_E_INDEX, DIR) + #define X2_ENABLE_PIN _EPIN(X2_E_INDEX, ENABLE) #ifndef X2_CS_PIN - #define X2_CS_PIN _EPIN(E_STEPPERS, CS) + #define X2_CS_PIN _EPIN(X2_E_INDEX, CS) #endif - #if E_STEPPERS > 4 || !PIN_EXISTS(X2_ENABLE) + #if X2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(X2_ENABLE) #error "No E stepper plug left for X2!" #endif #endif @@ -723,9 +772,9 @@ #else #define _X2_PINS __X2_PINS #endif - #define Y2_E_INDEX INCREMENT(E_STEPPERS) + #define Y2_E_INDEX INCREMENT(X2_E_INDEX) #else - #define Y2_E_INDEX E_STEPPERS + #define Y2_E_INDEX X2_E_INDEX #endif // The Y2 axis, if any, should be the next open extruder port @@ -737,7 +786,7 @@ #ifndef Y2_CS_PIN #define Y2_CS_PIN _EPIN(Y2_E_INDEX, CS) #endif - #if Y2_E_INDEX > 4 || !PIN_EXISTS(Y2_ENABLE) + #if Y2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Y2_ENABLE) #error "No E stepper plug left for Y2!" #endif #endif @@ -762,7 +811,7 @@ #ifndef Z2_CS_PIN #define Z2_CS_PIN _EPIN(Z2_E_INDEX, CS) #endif - #if Z2_E_INDEX > 4 || !PIN_EXISTS(Z2_ENABLE) + #if Z2_E_INDEX >= MAX_EXTRUDERS || !PIN_EXISTS(Z2_ENABLE) #error "No E stepper plug left for Z2!" #endif #endif @@ -782,7 +831,7 @@ PS_ON_PIN, HEATER_BED_PIN, FAN_PIN, FAN1_PIN, FAN2_PIN, CONTROLLER_FAN_PIN, \ _E0_PINS _E1_PINS _E2_PINS _E3_PINS _E4_PINS BED_PINS \ _H0_PINS _H1_PINS _H2_PINS _H3_PINS _H4_PINS \ - _X2_PINS _Y2_PINS _Z2_PINS \ + _D_PINS _X2_PINS _Y2_PINS _Z2_PINS \ } #define HAS_DIGIPOTSS (PIN_EXISTS(DIGIPOTSS)) diff --git a/Marlin/pinsDebug.h b/Marlin/pinsDebug.h index 24d058b4f2..ba6241fbeb 100644 --- a/Marlin/pinsDebug.h +++ b/Marlin/pinsDebug.h @@ -20,8 +20,6 @@ * */ -bool endstop_monitor_flag = false; - #define NAME_FORMAT "%-35s" // one place to specify the format of all the sources of names // "-" left justify, "28" minimum width of name, pad with blanks diff --git a/Marlin/pinsDebug_list.h b/Marlin/pinsDebug_list.h index e19858d528..b72c26dfe0 100644 --- a/Marlin/pinsDebug_list.h +++ b/Marlin/pinsDebug_list.h @@ -443,6 +443,18 @@ #if PIN_EXISTS(FIL_RUNOUT) REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT_PIN) #endif +#if PIN_EXISTS(FIL_RUNOUT2) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT2_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT3) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT3_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT4) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT4_PIN) +#endif +#if PIN_EXISTS(FIL_RUNOUT5) + REPORT_NAME_DIGITAL(__LINE__, FIL_RUNOUT5_PIN) +#endif #if PIN_EXISTS(HEATER_0) REPORT_NAME_DIGITAL(__LINE__, HEATER_0_PIN) #endif diff --git a/Marlin/pins_ANET_10.h b/Marlin/pins_ANET_10.h index bdd277e35c..a8cbd5f29c 100644 --- a/Marlin/pins_ANET_10.h +++ b/Marlin/pins_ANET_10.h @@ -153,7 +153,7 @@ * REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER */ -#if ENABLED(ULTRA_LCD) && ENABLED(NEWPANEL) +#if ENABLED(ULTRA_LCD) #define LCD_SDSS 28 #if ENABLED(ADC_KEYPAD) #define SERVO0_PIN 27 // free for BLTouch/3D-Touch @@ -193,7 +193,7 @@ #endif #else #define SERVO0_PIN 27 -#endif // ULTRA_LCD && NEWPANEL +#endif /** * ==================================================================== diff --git a/Marlin/pins_EINSY_RAMBO.h b/Marlin/pins_EINSY_RAMBO.h index b3c1d1caa0..e3f67059fa 100644 --- a/Marlin/pins_EINSY_RAMBO.h +++ b/Marlin/pins_EINSY_RAMBO.h @@ -33,10 +33,8 @@ // // TMC2130 Configuration_adv defaults for EinsyRambo // -#if DISABLED(HAVE_TMC2130) - #error "You must enable TMC2130 support in Configuration_adv.h for EinsyRambo." -#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130) - #error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRambo." +#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130) + #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRambo." #endif // TMC2130 Diag Pins (currently just for reference) @@ -120,7 +118,10 @@ #ifndef FAN_PIN #define FAN_PIN 8 #endif -#define FAN1_PIN 6 + +#ifndef FAN1_PIN + #define FAN1_PIN 6 +#endif // // Misc. Functions diff --git a/Marlin/pins_EINSY_RETRO.h b/Marlin/pins_EINSY_RETRO.h index df4f1c20be..a100d9329e 100644 --- a/Marlin/pins_EINSY_RETRO.h +++ b/Marlin/pins_EINSY_RETRO.h @@ -33,10 +33,8 @@ // // TMC2130 Configuration_adv defaults for EinsyRetro // -#if DISABLED(HAVE_TMC2130) - #error "You must enable TMC2130 support in Configuration_adv.h for EinsyRetro." -#elif DISABLED(X_IS_TMC2130) || DISABLED(Y_IS_TMC2130) || DISABLED(Z_IS_TMC2130) || DISABLED(E0_IS_TMC2130) - #error "You must enable ([XYZ]|E0)_IS_TMC2130 in Configuration_adv.h for EinsyRetro." +#if !AXIS_DRIVER_TYPE(X, TMC2130) || !AXIS_DRIVER_TYPE(Y, TMC2130) || !AXIS_DRIVER_TYPE(Z, TMC2130) || !AXIS_DRIVER_TYPE(E0, TMC2130) + #error "You must set ([XYZ]|E0)_DRIVER_TYPE to TMC2130 in Configuration.h for EinsyRetro." #endif // TMC2130 Diag Pins (currently just for reference) diff --git a/Marlin/pins_RAMPS.h b/Marlin/pins_RAMPS.h index d4182e232e..20d1cba520 100644 --- a/Marlin/pins_RAMPS.h +++ b/Marlin/pins_RAMPS.h @@ -73,8 +73,8 @@ #ifndef X_MAX_PIN #define X_MAX_PIN 2 #endif -#define Y_MIN_PIN 15 -#define Y_MAX_PIN 14 +#define Y_MIN_PIN 14 +#define Y_MAX_PIN 15 #define Z_MIN_PIN 18 #define Z_MAX_PIN 19 @@ -138,7 +138,7 @@ #endif #endif -#if ENABLED(HAVE_TMC2208) +#if HAS_DRIVER(TMC2208) /** * TMC2208 stepper drivers * @@ -223,46 +223,48 @@ // Heaters / Fans // #ifndef MOSFET_D_PIN - #define MOSFET_D_PIN -1 + #define MOSFET_D_PIN -1 #endif #ifndef RAMPS_D8_PIN - #define RAMPS_D8_PIN 8 + #define RAMPS_D8_PIN 8 #endif #ifndef RAMPS_D9_PIN - #define RAMPS_D9_PIN 9 + #define RAMPS_D9_PIN 9 #endif #ifndef RAMPS_D10_PIN - #define RAMPS_D10_PIN 10 + #define RAMPS_D10_PIN 10 #endif -#define HEATER_0_PIN RAMPS_D10_PIN +#define HEATER_0_PIN RAMPS_D10_PIN #if ENABLED(IS_RAMPS_EFB) // Hotend, Fan, Bed - #define FAN_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN #elif ENABLED(IS_RAMPS_EEF) // Hotend, Hotend, Fan - #define HEATER_1_PIN RAMPS_D9_PIN - #define FAN_PIN RAMPS_D8_PIN + #define HEATER_1_PIN RAMPS_D9_PIN #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed - #define HEATER_1_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN + #define HEATER_1_PIN RAMPS_D9_PIN + #define HEATER_BED_PIN RAMPS_D8_PIN #elif ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Fan - #define FAN_PIN RAMPS_D9_PIN - #define FAN1_PIN RAMPS_D8_PIN -#elif ENABLED(IS_RAMPS_SF) // Spindle, Fan - #define FAN_PIN RAMPS_D8_PIN -#else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") - #define FAN_PIN RAMPS_D9_PIN - #define HEATER_BED_PIN RAMPS_D8_PIN + #define FAN1_PIN RAMPS_D8_PIN +#elif DISABLED(IS_RAMPS_SF) // Not Spindle, Fan (i.e., "EFBF" or "EFBE") + #define HEATER_BED_PIN RAMPS_D8_PIN #if HOTENDS == 1 - #define FAN1_PIN MOSFET_D_PIN + #define FAN1_PIN MOSFET_D_PIN #else - #define HEATER_1_PIN MOSFET_D_PIN + #define HEATER_1_PIN MOSFET_D_PIN #endif #endif #ifndef FAN_PIN - #define FAN_PIN 4 // IO pin. Buffer needed + #if ENABLED(IS_RAMPS_EFB) || ENABLED(IS_RAMPS_EFF) // Hotend, Fan, Bed or Hotend, Fan, Fan + #define FAN_PIN RAMPS_D9_PIN + #elif ENABLED(IS_RAMPS_EEF) || ENABLED(IS_RAMPS_SF) // Hotend, Hotend, Fan or Spindle, Fan + #define FAN_PIN RAMPS_D8_PIN + #elif ENABLED(IS_RAMPS_EEB) // Hotend, Hotend, Bed + #define FAN_PIN 4 // IO pin. Buffer needed + #else // Non-specific are "EFB" (i.e., "EFBF" or "EFBE") + #define FAN_PIN RAMPS_D9_PIN + #endif #endif // @@ -277,7 +279,7 @@ // define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector #ifndef FIL_RUNOUT_PIN - #define FIL_RUNOUT_PIN 2 + #define FIL_RUNOUT_PIN 4 #endif #ifndef PS_ON_PIN diff --git a/Marlin/pins_RIGIDBOARD.h b/Marlin/pins_RIGIDBOARD.h index e985963505..f783d83c61 100644 --- a/Marlin/pins_RIGIDBOARD.h +++ b/Marlin/pins_RIGIDBOARD.h @@ -36,6 +36,7 @@ // // MOSFET changes // +#define RAMPS_D9_PIN 8 // FAN (by default) #define RAMPS_D10_PIN 9 // EXTRUDER 1 #define MOSFET_D_PIN 12 // EXTRUDER 2 or FAN diff --git a/Marlin/pins_RUMBA.h b/Marlin/pins_RUMBA.h index e604301545..160dae55b8 100644 --- a/Marlin/pins_RUMBA.h +++ b/Marlin/pins_RUMBA.h @@ -124,7 +124,9 @@ #define HEATER_3_PIN 8 #define HEATER_BED_PIN 9 -#define FAN_PIN 7 +#ifndef FAN_PIN + #define FAN_PIN 7 +#endif #define FAN1_PIN 8 // diff --git a/Marlin/pins_TRIGORILLA_14.h b/Marlin/pins_TRIGORILLA_14.h index 70b0a930a9..80ce3bc98c 100644 --- a/Marlin/pins_TRIGORILLA_14.h +++ b/Marlin/pins_TRIGORILLA_14.h @@ -30,7 +30,52 @@ #define IS_RAMPS_EFB -#define FAN2_PIN 44 -#define ORIG_E0_AUTO_FAN_PIN 44 +// FAN0 / D9 - Typically used for the part fan on Anycubic Delta devices +#define FAN_PIN 9 + +// FAN1 / D7 - Typically unused, can be allocated as Case Fan + +// FAN2 / D44 - Typical Extruder Fan on Anycubic Delta devices +#define FAN2_PIN 44 +#define ORIG_E0_AUTO_FAN_PIN 44 #include "pins_RAMPS.h" + +// TODO 1.4 boards do have an E1 stepper driver. However the pin definitions +// from pins_RAMPS.h are incorrect for this board. e.g., Pin 44 is the Extruder fan. +#undef E1_STEP_PIN +#undef E1_DIR_PIN +#undef E1_ENABLE_PIN +#undef E1_CS_PIN + +// +// AnyCubic made the following changes to 1.1.0-RC8 +// If these are appropriate for your LCD let us know. +// +#if 0 && ENABLED(ULTRA_LCD) + + // LCD Display output pins + #if ENABLED(NEWPANEL) && ENABLED(PANEL_ONE) + #undef LCD_PINS_D6 + #define LCD_PINS_D6 57 + #endif + + // LCD Display input pins + #if ENABLED(NEWPANEL) + #if ENABLED(VIKI2) || ENABLED(miniVIKI) + #undef DOGLCD_A0 + #define DOGLCD_A0 23 + #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef LCD_BACKLIGHT_PIN + #define LCD_BACKLIGHT_PIN 67 + #endif + #elif ENABLED(MINIPANEL) + #undef BEEPER_PIN + #define BEEPER_PIN 33 + #undef DOGLCD_A0 + #define DOGLCD_A0 42 + #endif + +#endif // ULTRA_LCD diff --git a/Marlin/pins_ULTIMAKER.h b/Marlin/pins_ULTIMAKER.h index 4b6488aede..23941a1624 100644 --- a/Marlin/pins_ULTIMAKER.h +++ b/Marlin/pins_ULTIMAKER.h @@ -43,7 +43,7 @@ // // Servos // -#define SERVO0_PIN 13 // UNTESTED +#define SERVO0_PIN 11 // // Limit Switches diff --git a/Marlin/planner.cpp b/Marlin/planner.cpp index 7a73c50f6d..e21c50126c 100644 --- a/Marlin/planner.cpp +++ b/Marlin/planner.cpp @@ -100,13 +100,13 @@ volatile uint8_t Planner::block_buffer_head, // Index of the next block to be uint16_t Planner::cleaning_buffer_counter; // A counter to disable queuing of blocks uint8_t Planner::delay_before_delivering; // This counter delays delivery of blocks when queue becomes empty to allow the opportunity of merging blocks -uint32_t Planner::max_acceleration_mm_per_s2[XYZE_N], // (mm/s^2) M201 XYZE - Planner::max_acceleration_steps_per_s2[XYZE_N], // (steps/s^2) Derived from mm_per_s2 - Planner::min_segment_time_us; // (µs) M205 B +uint32_t Planner::max_acceleration_mm_per_s2[NUM_AXIS_N], // (mm/s^2) M201 XYZE + Planner::max_acceleration_steps_per_s2[NUM_AXIS_N], // (steps/s^2) Derived from mm_per_s2 + Planner::min_segment_time_us; // (µs) M205 Q -float Planner::max_feedrate_mm_s[XYZE_N], // (mm/s) M203 XYZE - Max speeds - Planner::axis_steps_per_mm[XYZE_N], // (steps) M92 XYZE - Steps per millimeter - Planner::steps_to_mm[XYZE_N], // (mm) Millimeters per step +float Planner::max_feedrate_mm_s[NUM_AXIS_N], // (mm/s) M203 XYZE - Max speeds + Planner::axis_steps_per_mm[NUM_AXIS_N], // (steps) M92 XYZE - Steps per millimeter + Planner::steps_to_mm[NUM_AXIS_N], // (mm) Millimeters per step Planner::min_feedrate_mm_s, // (mm/s) M205 S - Minimum linear feedrate Planner::acceleration, // (mm/s^2) M204 S - Normal acceleration. DEFAULT ACCELERATION for all printing moves. Planner::retract_acceleration, // (mm/s^2) M204 R - Retract acceleration. Filament pull-back and push-forward while standing still in the other axes @@ -123,7 +123,14 @@ float Planner::max_feedrate_mm_s[XYZE_N], // (mm/s) M203 XYZE - Max speeds #endif #endif #else - float Planner::max_jerk[XYZE]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. + float Planner::max_jerk[NUM_AXIS]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. +#endif + +#if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + float Planner::k0[MOV_AXIS], + Planner::k1[MOV_AXIS], + Planner::k2[MOV_AXIS], + Planner::sqrtk1[MOV_AXIS]; #endif #if ENABLED(ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED) @@ -206,7 +213,7 @@ float Planner::previous_speed[NUM_AXIS], #endif #if HAS_POSITION_FLOAT - float Planner::position_float[XYZE]; // Needed for accurate maths. Steps cannot be used! + float Planner::position_float[NUM_AXIS]; // Needed for accurate maths. Steps cannot be used! #endif #if ENABLED(ULTRA_LCD) @@ -1137,7 +1144,13 @@ void Planner::recalculate() { float high = 0.0; for (uint8_t b = block_buffer_tail; b != block_buffer_head; b = next_block_index(b)) { block_t* block = &block_buffer[b]; - if (block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS]) { + if ( + #if ENABLED(HANGPRINTER) + block->steps[A_AXIS] || block->steps[B_AXIS] || block->steps[C_AXIS] || block->steps[D_AXIS] + #else + block->steps[X_AXIS] || block->steps[Y_AXIS] || block->steps[Z_AXIS] + #endif + ) { const float se = (float)block->steps[E_AXIS] / block->step_event_count * SQRT(block->nominal_speed_sqr); // mm/sec; NOLESS(high, se); } @@ -1514,6 +1527,9 @@ float Planner::get_axis_position_mm(const AxisEnum axis) { #else axis_steps = stepper.position(axis); #endif + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + if (axis != E_AXIS) return (sq(axis_steps / k0[axis] + sqrtk1[axis]) - k1[axis]) / k2[axis]; + #endif return axis_steps * steps_to_mm[axis]; } @@ -1522,23 +1538,34 @@ float Planner::get_axis_position_mm(const AxisEnum axis) { */ void Planner::synchronize() { while (has_blocks_queued() || cleaning_buffer_counter) idle(); } +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + #define COUNT_MOVE count_it +#else + #define COUNT_MOVE true +#endif + /** * Planner::_buffer_steps * * Add a new linear movement to the planner queue (in terms of steps). * - * target - target position in steps units - * fr_mm_s - (target) speed of the move - * extruder - target extruder - * millimeters - the length of the movement, if known + * target - target position in steps units + * target_float - target position in mm (HAS_POSITION_FLOAT) + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) * * Returns true if movement was properly queued, false otherwise */ -bool Planner::_buffer_steps(const int32_t (&target)[XYZE] +bool Planner::_buffer_steps(const int32_t (&target)[NUM_AXIS] #if HAS_POSITION_FLOAT - , const float (&target_float)[XYZE] + , const float (&target_float)[NUM_AXIS] + #endif + , float fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it/*=true*/ #endif - , float fr_mm_s, const uint8_t extruder, const float &millimeters ) { // If we are cleaning, do not accept queuing of movements @@ -1554,6 +1581,9 @@ bool Planner::_buffer_steps(const int32_t (&target)[XYZE] , target_float #endif , fr_mm_s, extruder, millimeters + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , count_it + #endif )) { // Movement was not queued, probably because it was too short. // Simply accept that as movement queued and done @@ -1585,24 +1615,33 @@ bool Planner::_buffer_steps(const int32_t (&target)[XYZE] * * Fills a new linear movement in the block (in terms of steps). * - * target - target position in steps units - * fr_mm_s - (target) speed of the move - * extruder - target extruder + * target - target position in steps units + * target_float - target position in mm (HAS_POSITION_FLOAT) + * fr_mm_s - (target) speed of the move + * extruder - target extruder + * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) * * Returns true is movement is acceptable, false otherwise */ bool Planner::_populate_block(block_t * const block, bool split_move, - const int32_t (&target)[XYZE] + const int32_t (&target)[NUM_AXIS] #if HAS_POSITION_FLOAT - , const float (&target_float)[XYZE] + , const float (&target_float)[NUM_AXIS] #endif , float fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it/*=true*/ + #endif ) { const int32_t da = target[A_AXIS] - position[A_AXIS], db = target[B_AXIS] - position[B_AXIS], - dc = target[C_AXIS] - position[C_AXIS]; - + dc = target[C_AXIS] - position[C_AXIS] + #if ENABLED(HANGPRINTER) + , dd = target[D_AXIS] - position[D_AXIS] + #endif + ; int32_t de = target[E_AXIS] - position[E_AXIS]; /* <-- add a slash to enable @@ -1622,10 +1661,12 @@ bool Planner::_populate_block(block_t * const block, bool split_move, if (de) { #if ENABLED(PREVENT_COLD_EXTRUSION) if (thermalManager.tooColdToExtrude(extruder)) { - position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part - #if HAS_POSITION_FLOAT - position_float[E_AXIS] = target_float[E_AXIS]; - #endif + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = target_float[E_AXIS]; + #endif + } de = 0; // no difference SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_COLD_EXTRUDE_STOP); @@ -1633,10 +1674,12 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif // PREVENT_COLD_EXTRUSION #if ENABLED(PREVENT_LENGTHY_EXTRUDE) if (ABS(de * e_factor[extruder]) > (int32_t)axis_steps_per_mm[E_AXIS_N] * (EXTRUDE_MAXLENGTH)) { // It's not important to get max. extrusion length in a precision < 1mm, so save some cycles and cast to int - position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part - #if HAS_POSITION_FLOAT - position_float[E_AXIS] = target_float[E_AXIS]; - #endif + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; // Behave as if the move really took place, but ignore E part + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = target_float[E_AXIS]; + #endif + } de = 0; // no difference SERIAL_ECHO_START(); SERIAL_ECHOLNPGM(MSG_ERR_LONG_EXTRUDE_STOP); @@ -1665,6 +1708,11 @@ bool Planner::_populate_block(block_t * const block, bool split_move, if (dc < 0) SBI(dm, Z_HEAD); // ...and Z if (db + dc < 0) SBI(dm, B_AXIS); // Motor B direction if (CORESIGN(db - dc) < 0) SBI(dm, C_AXIS); // Motor C direction + #elif ENABLED(HANGPRINTER) + if (da < 0) SBI(dm, A_AXIS); + if (db < 0) SBI(dm, B_AXIS); + if (dc < 0) SBI(dm, C_AXIS); + if (dd < 0) SBI(dm, D_AXIS); #else if (da < 0) SBI(dm, X_AXIS); if (db < 0) SBI(dm, Y_AXIS); @@ -1681,6 +1729,11 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Set direction bits block->direction_bits = dm; + // Specify if block is to be counted or not + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + block->count_it = count_it; + #endif + // Number of steps for each axis // See http://www.corexy.com/theory.html #if CORE_IS_XY @@ -1699,6 +1752,11 @@ bool Planner::_populate_block(block_t * const block, bool split_move, block->steps[A_AXIS] = ABS(da); block->steps[B_AXIS] = ABS(db); block->steps[Z_AXIS] = ABS(dc); + #elif ENABLED(HANGPRINTER) + block->steps[A_AXIS] = ABS(da); + block->steps[B_AXIS] = ABS(db); + block->steps[C_AXIS] = ABS(dc); + block->steps[D_AXIS] = ABS(dd); #else // default non-h-bot planning block->steps[A_AXIS] = ABS(da); @@ -1707,7 +1765,14 @@ bool Planner::_populate_block(block_t * const block, bool split_move, #endif block->steps[E_AXIS] = esteps; - block->step_event_count = MAX4(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], esteps); + + block->step_event_count = ( + #if ENABLED(HANGPRINTER) + MAX5(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], block->steps[D_AXIS], esteps) + #else + MAX4(block->steps[A_AXIS], block->steps[B_AXIS], block->steps[C_AXIS], esteps) + #endif + ); // Bail if this is a zero-length block if (block->step_event_count < MIN_STEPS_PER_SEGMENT) return false; @@ -1715,13 +1780,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // For a mixing extruder, get a magnified esteps for each #if ENABLED(MIXING_EXTRUDER) for (uint8_t i = 0; i < MIXING_STEPPERS; i++) - block->mix_steps[i] = mixing_factor[i] * ( - #if ENABLED(LIN_ADVANCE) - esteps - #else - block->step_event_count - #endif - ); + block->mix_steps[i] = mixing_factor[i] * esteps; #endif #if FAN_COUNT > 0 @@ -1761,7 +1820,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, enable_Z(); } if (block->steps[X_AXIS]) enable_X(); - #else + #elif DISABLED(HANGPRINTER) // Hangprinters X, Y, Z, E0 axes should always be enabled anyways if (block->steps[X_AXIS]) enable_X(); if (block->steps[Y_AXIS]) enable_Y(); #if DISABLED(Z_LATE_ENABLE) @@ -1902,14 +1961,21 @@ bool Planner::_populate_block(block_t * const block, bool split_move, delta_mm[C_AXIS] = CORESIGN(db - dc) * steps_to_mm[C_AXIS]; #endif #else - float delta_mm[ABCE]; + float delta_mm[NUM_AXIS]; delta_mm[A_AXIS] = da * steps_to_mm[A_AXIS]; delta_mm[B_AXIS] = db * steps_to_mm[B_AXIS]; delta_mm[C_AXIS] = dc * steps_to_mm[C_AXIS]; + #if ENABLED(HANGPRINTER) + delta_mm[D_AXIS] = dd * steps_to_mm[D_AXIS]; + #endif #endif delta_mm[E_AXIS] = esteps_float * steps_to_mm[E_AXIS_N]; - if (block->steps[A_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[B_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[C_AXIS] < MIN_STEPS_PER_SEGMENT) { + if (block->steps[A_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[B_AXIS] < MIN_STEPS_PER_SEGMENT && block->steps[C_AXIS] < MIN_STEPS_PER_SEGMENT + #if ENABLED(HANGPRINTER) + && block->steps[D_AXIS] < MIN_STEPS_PER_SEGMENT + #endif + ) { block->millimeters = ABS(delta_mm[E_AXIS]); } else if (!millimeters) { @@ -1920,6 +1986,8 @@ bool Planner::_populate_block(block_t * const block, bool split_move, sq(delta_mm[X_HEAD]) + sq(delta_mm[Y_AXIS]) + sq(delta_mm[Z_HEAD]) #elif CORE_IS_YZ sq(delta_mm[X_AXIS]) + sq(delta_mm[Y_HEAD]) + sq(delta_mm[Z_HEAD]) + #elif ENABLED(HANGPRINTER) + sq(delta_mm[A_AXIS]) + sq(delta_mm[B_AXIS]) + sq(delta_mm[C_AXIS]) + sq(delta_mm[D_AXIS]) #else sq(delta_mm[X_AXIS]) + sq(delta_mm[Y_AXIS]) + sq(delta_mm[Z_AXIS]) #endif @@ -2005,7 +2073,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Calculate and limit speed in mm/sec for each axis float current_speed[NUM_AXIS], speed_factor = 1.0f; // factor <1 decreases speed - LOOP_XYZE(i) { + LOOP_NUM_AXIS(i) { const float cs = ABS((current_speed[i] = delta_mm[i] * inverse_secs)); #if ENABLED(DISTINCT_E_FACTORS) if (i == E_AXIS) i += extruder; @@ -2053,7 +2121,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Correct the speed if (speed_factor < 1.0f) { - LOOP_XYZE(i) current_speed[i] *= speed_factor; + LOOP_NUM_AXIS(i) current_speed[i] *= speed_factor; block->nominal_rate *= speed_factor; block->nominal_speed_sqr = block->nominal_speed_sqr * sq(speed_factor); } @@ -2061,7 +2129,11 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Compute and limit the acceleration rate for the trapezoid generator. const float steps_per_mm = block->step_event_count * inverse_millimeters; uint32_t accel; - if (!block->steps[A_AXIS] && !block->steps[B_AXIS] && !block->steps[C_AXIS]) { + if (!block->steps[A_AXIS] && !block->steps[B_AXIS] && !block->steps[C_AXIS] + #if ENABLED(HANGPRINTER) + && !block->steps[D_AXIS] + #endif + ) { // convert to: acceleration steps/sec^2 accel = CEIL(retract_acceleration * steps_per_mm); #if ENABLED(LIN_ADVANCE) @@ -2148,12 +2220,18 @@ bool Planner::_populate_block(block_t * const block, bool split_move, LIMIT_ACCEL_LONG(A_AXIS, 0); LIMIT_ACCEL_LONG(B_AXIS, 0); LIMIT_ACCEL_LONG(C_AXIS, 0); + #if ENABLED(HANGPRINTER) + LIMIT_ACCEL_LONG(D_AXIS, 0); + #endif LIMIT_ACCEL_LONG(E_AXIS, ACCEL_IDX); } else { LIMIT_ACCEL_FLOAT(A_AXIS, 0); LIMIT_ACCEL_FLOAT(B_AXIS, 0); LIMIT_ACCEL_FLOAT(C_AXIS, 0); + #if ENABLED(HANGPRINTER) + LIMIT_ACCEL_FLOAT(D_AXIS, 0); + #endif LIMIT_ACCEL_FLOAT(E_AXIS, ACCEL_IDX); } } @@ -2279,27 +2357,27 @@ bool Planner::_populate_block(block_t * const block, bool split_move, /** * Adapted from Průša MKS firmware * https://github.com/prusa3d/Prusa-Firmware - * - * Start with a safe speed (from which the machine may halt to stop immediately). */ + const float nominal_speed = SQRT(block->nominal_speed_sqr); // Exit speed limited by a jerk to full halt of a previous last segment static float previous_safe_speed; - const float nominal_speed = SQRT(block->nominal_speed_sqr); + // Start with a safe speed (from which the machine may halt to stop immediately). float safe_speed = nominal_speed; uint8_t limited = 0; - LOOP_XYZE(i) { - const float jerk = ABS(current_speed[i]), maxj = max_jerk[i]; - if (jerk > maxj) { - if (limited) { - const float mjerk = maxj * nominal_speed; - if (jerk * safe_speed > mjerk) safe_speed = mjerk / jerk; + LOOP_NUM_AXIS(i) { + const float jerk = ABS(current_speed[i]), // cs : Starting from zero, change in speed for this axis + maxj = max_jerk[i]; // mj : The max jerk setting for this axis + if (jerk > maxj) { // cs > mj : New current speed too fast? + if (limited) { // limited already? + const float mjerk = nominal_speed * maxj; // ns*mj + if (jerk * safe_speed > mjerk) safe_speed = mjerk / jerk; // ns*mj/cs } else { - ++limited; - safe_speed = maxj; + safe_speed *= maxj / jerk; // Initial limit: ns*mj/cs + ++limited; // Initially limited } } } @@ -2321,7 +2399,7 @@ bool Planner::_populate_block(block_t * const block, bool split_move, // Now limit the jerk in all axes. const float smaller_speed_factor = vmax_junction / previous_nominal_speed; - LOOP_XYZE(axis) { + LOOP_NUM_AXIS(axis) { // Limit an axis. We have to differentiate: coasting, reversal of an axis, full stop. float v_exit = previous_speed[axis] * smaller_speed_factor, v_entry = current_speed[axis]; @@ -2381,12 +2459,22 @@ bool Planner::_populate_block(block_t * const block, bool split_move, COPY(previous_speed, current_speed); previous_nominal_speed_sqr = block->nominal_speed_sqr; - // Update the position - static_assert(COUNT(target) > 1, "Parameter to _buffer_steps must be (&target)[XYZE]!"); - COPY(position, target); - #if HAS_POSITION_FLOAT - COPY(position_float, target_float); - #endif + // Update the position (only when a move was queued) + static_assert(COUNT(target) > 1, "Parameter to _populate_block must be (&target)[" + #if ENABLED(HANGPRINTER) + "ABCD" + #else + "XYZ" + #endif + "E]!" + ); + + if (COUNT_MOVE) { + COPY(position, target); + #if HAS_POSITION_FLOAT + COPY(position_float, target_float); + #endif + } // Movement was accepted return true; @@ -2409,6 +2497,9 @@ void Planner::buffer_sync_block() { block->position[A_AXIS] = position[A_AXIS]; block->position[B_AXIS] = position[B_AXIS]; block->position[C_AXIS] = position[C_AXIS]; + #if ENABLED(HANGPRINTER) + block->position[D_AXIS] = position[D_AXIS]; + #endif block->position[E_AXIS] = position[E_AXIS]; // If this is the first added movement, reload the delay, otherwise, cancel it. @@ -2438,7 +2529,15 @@ void Planner::buffer_sync_block() { * extruder - target extruder * millimeters - the length of the movement, if known */ -bool Planner::buffer_segment(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/) { +bool Planner::buffer_segment(const float &a, const float &b, const float &c + #if ENABLED(HANGPRINTER) + , const float &d + #endif + , const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters/*=0.0*/ + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , bool count_it /* = true */ + #endif +) { // If we are cleaning, do not accept queuing of movements if (cleaning_buffer_counter) return false; @@ -2453,23 +2552,40 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con // The target position of the tool in absolute steps // Calculate target position in absolute steps - const int32_t target[ABCE] = { - LROUND(a * axis_steps_per_mm[A_AXIS]), - LROUND(b * axis_steps_per_mm[B_AXIS]), - LROUND(c * axis_steps_per_mm[C_AXIS]), + const int32_t target[NUM_AXIS] = { + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + LROUND(k0[A_AXIS] * (SQRT(k1[A_AXIS] + a * k2[A_AXIS]) - sqrtk1[A_AXIS])), + LROUND(k0[B_AXIS] * (SQRT(k1[B_AXIS] + b * k2[B_AXIS]) - sqrtk1[B_AXIS])), + LROUND(k0[C_AXIS] * (SQRT(k1[C_AXIS] + c * k2[C_AXIS]) - sqrtk1[C_AXIS])), + LROUND(k0[D_AXIS] * (SQRT(k1[D_AXIS] + d * k2[D_AXIS]) - sqrtk1[D_AXIS])), + #else + LROUND(a * axis_steps_per_mm[A_AXIS]), + LROUND(b * axis_steps_per_mm[B_AXIS]), + LROUND(c * axis_steps_per_mm[C_AXIS]), + #if ENABLED(HANGPRINTER) + LROUND(d * axis_steps_per_mm[D_AXIS]), + #endif + #endif LROUND(e * axis_steps_per_mm[E_AXIS_N]) }; #if HAS_POSITION_FLOAT - const float target_float[XYZE] = { a, b, c, e }; + const float target_float[NUM_AXIS] = { a, b, c + #if ENABLED(HANGPRINTER) + , d + #endif + , e + }; #endif // DRYRUN prevents E moves from taking place if (DEBUGGING(DRYRUN)) { - position[E_AXIS] = target[E_AXIS]; - #if HAS_POSITION_FLOAT - position_float[E_AXIS] = e; - #endif + if (COUNT_MOVE) { + position[E_AXIS] = target[E_AXIS]; + #if HAS_POSITION_FLOAT + position_float[E_AXIS] = e; + #endif + } } /* <-- add a slash to enable @@ -2487,13 +2603,18 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con #endif SERIAL_ECHOPAIR(" (", position[Y_AXIS]); SERIAL_ECHOPAIR("->", target[Y_AXIS]); - #if ENABLED(DELTA) + #if ENABLED(DELTA) || ENABLED(HANGPRINTER) SERIAL_ECHOPAIR(") C:", c); #else SERIAL_ECHOPAIR(") Z:", c); #endif SERIAL_ECHOPAIR(" (", position[Z_AXIS]); SERIAL_ECHOPAIR("->", target[Z_AXIS]); + #if ENABLED(HANGPRINTER) + SERIAL_ECHOPAIR(") D:", d); + SERIAL_ECHOPAIR(" (", position[D_AXIS]); + SERIAL_ECHOPAIR("->", target[D_AXIS]); + #endif SERIAL_ECHOPAIR(") E:", e); SERIAL_ECHOPAIR(" (", position[E_AXIS]); SERIAL_ECHOPAIR("->", target[E_AXIS]); @@ -2501,12 +2622,15 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con //*/ // Queue the movement - if ( + if ( !_buffer_steps(target #if HAS_POSITION_FLOAT , target_float #endif , fr_mm_s, extruder, millimeters + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , count_it + #endif ) ) return false; @@ -2521,18 +2645,41 @@ bool Planner::buffer_segment(const float &a, const float &b, const float &c, con * On CORE machines stepper ABC will be translated from the given XYZ. */ -void Planner::_set_position_mm(const float &a, const float &b, const float &c, const float &e) { +void Planner::_set_position_mm(const float &a, const float &b, const float &c + #if ENABLED(HANGPRINTER) + , const float &d + #endif + , const float &e +) { #if ENABLED(DISTINCT_E_FACTORS) last_extruder = active_extruder; #endif - position[A_AXIS] = LROUND(a * axis_steps_per_mm[A_AXIS]), - position[B_AXIS] = LROUND(b * axis_steps_per_mm[B_AXIS]), - position[C_AXIS] = LROUND(c * axis_steps_per_mm[C_AXIS]), + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + position[A_AXIS] = LROUND(k0[A_AXIS] * (SQRT(k1[A_AXIS] + a * k2[A_AXIS]) - sqrtk1[A_AXIS])), + position[B_AXIS] = LROUND(k0[B_AXIS] * (SQRT(k1[B_AXIS] + b * k2[B_AXIS]) - sqrtk1[B_AXIS])), + position[C_AXIS] = LROUND(k0[C_AXIS] * (SQRT(k1[C_AXIS] + c * k2[C_AXIS]) - sqrtk1[C_AXIS])), + position[D_AXIS] = LROUND(k0[D_AXIS] * (SQRT(k1[D_AXIS] + d * k2[D_AXIS]) - sqrtk1[D_AXIS])), + #else + position[A_AXIS] = LROUND(a * axis_steps_per_mm[A_AXIS]); + position[B_AXIS] = LROUND(b * axis_steps_per_mm[B_AXIS]); + position[C_AXIS] = LROUND(axis_steps_per_mm[C_AXIS] * (c + ( + #if !IS_KINEMATIC && ENABLED(AUTO_BED_LEVELING_UBL) + leveling_active ? ubl.get_z_correction(a, b) : + #endif + 0) + )); + #if ENABLED(HANGPRINTER) + position[D_AXIS] = LROUND(d * axis_steps_per_mm[D_AXIS]), + #endif + #endif position[E_AXIS] = LROUND(e * axis_steps_per_mm[_EINDEX]); #if HAS_POSITION_FLOAT position_float[A_AXIS] = a; position_float[B_AXIS] = b; position_float[C_AXIS] = c; + #if ENABLED(HANGPRINTER) + position_float[D_AXIS] = d; + #endif position_float[E_AXIS] = e; #endif if (has_blocks_queued()) { @@ -2541,21 +2688,32 @@ void Planner::_set_position_mm(const float &a, const float &b, const float &c, c buffer_sync_block(); } else - stepper.set_position(position[A_AXIS], position[B_AXIS], position[C_AXIS], position[E_AXIS]); + stepper.set_position(position[A_AXIS], position[B_AXIS], position[C_AXIS], + #if ENABLED(HANGPRINTER) + position[D_AXIS], + #endif + position[E_AXIS] + ); } void Planner::set_position_mm_kinematic(const float (&cart)[XYZE]) { #if PLANNER_LEVELING float raw[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; apply_leveling(raw); + #elif ENABLED(HANGPRINTER) + float raw[XYZ] = { cart[X_AXIS], cart[Y_AXIS], cart[Z_AXIS] }; #else const float (&raw)[XYZE] = cart; #endif #if IS_KINEMATIC inverse_kinematics(raw); - _set_position_mm(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_AXIS]); + #if ENABLED(HANGPRINTER) + _set_position_mm(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], cart[E_CART]); + #else + _set_position_mm(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_CART]); + #endif #else - _set_position_mm(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_AXIS]); + _set_position_mm(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_CART]); #endif } @@ -2569,14 +2727,17 @@ void Planner::set_position_mm(const AxisEnum axis, const float &v) { #else const uint8_t axis_index = axis; #endif - position[axis] = LROUND(v * axis_steps_per_mm[axis_index]); + position[axis] = LROUND(axis_steps_per_mm[axis_index] * (v + ( + #if ENABLED(AUTO_BED_LEVELING_UBL) + axis == Z_AXIS && leveling_active ? ubl.get_z_correction(current_position[X_AXIS], current_position[Y_AXIS]) : + #endif + 0) + )); #if HAS_POSITION_FLOAT position_float[axis] = v; #endif - if (has_blocks_queued()) { - //previous_speed[axis] = 0.0; + if (has_blocks_queued()) buffer_sync_block(); - } else stepper.set_position(axis, position[axis]); } @@ -2589,7 +2750,7 @@ void Planner::reset_acceleration_rates() { #define AXIS_CONDITION true #endif uint32_t highest_rate = 1; - LOOP_XYZE_N(i) { + LOOP_NUM_AXIS_N(i) { max_acceleration_steps_per_s2[i] = max_acceleration_mm_per_s2[i] * axis_steps_per_mm[i]; if (AXIS_CONDITION) NOLESS(highest_rate, max_acceleration_steps_per_s2[i]); } @@ -2601,7 +2762,7 @@ void Planner::reset_acceleration_rates() { // Recalculate position, steps_to_mm if axis_steps_per_mm changes! void Planner::refresh_positioning() { - LOOP_XYZE_N(i) steps_to_mm[i] = 1.0f / axis_steps_per_mm[i]; + LOOP_NUM_AXIS_N(i) steps_to_mm[i] = 1.0f / axis_steps_per_mm[i]; set_position_mm_kinematic(current_position); reset_acceleration_rates(); } diff --git a/Marlin/planner.h b/Marlin/planner.h index fd06be588c..c4d459de91 100644 --- a/Marlin/planner.h +++ b/Marlin/planner.h @@ -76,6 +76,10 @@ typedef struct { volatile uint8_t flag; // Block flags (See BlockFlag enum above) - Modified by ISR and main thread! + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + bool count_it; + #endif + // Fields used by the motion planner to manage acceleration float nominal_speed_sqr, // The nominal speed for this block in (mm/sec)^2 entry_speed_sqr, // Entry speed at previous-current junction in (mm/sec)^2 @@ -188,12 +192,12 @@ class Planner { // May be auto-adjusted by a filament width sensor #endif - static uint32_t max_acceleration_mm_per_s2[XYZE_N], // (mm/s^2) M201 XYZE - max_acceleration_steps_per_s2[XYZE_N], // (steps/s^2) Derived from mm_per_s2 - min_segment_time_us; // (µs) M205 B - static float max_feedrate_mm_s[XYZE_N], // (mm/s) M203 XYZE - Max speeds - axis_steps_per_mm[XYZE_N], // (steps) M92 XYZE - Steps per millimeter - steps_to_mm[XYZE_N], // (mm) Millimeters per step + static uint32_t max_acceleration_mm_per_s2[NUM_AXIS_N], // (mm/s^2) M201 XYZE + max_acceleration_steps_per_s2[NUM_AXIS_N], // (steps/s^2) Derived from mm_per_s2 + min_segment_time_us; // (µs) M205 Q + static float max_feedrate_mm_s[NUM_AXIS_N], // (mm/s) M203 XYZE - Max speeds + axis_steps_per_mm[NUM_AXIS_N], // (steps) M92 XYZE - Steps per millimeter + steps_to_mm[NUM_AXIS_N], // (mm) Millimeters per step min_feedrate_mm_s, // (mm/s) M205 S - Minimum linear feedrate acceleration, // (mm/s^2) M204 S - Normal acceleration. DEFAULT ACCELERATION for all printing moves. retract_acceleration, // (mm/s^2) M204 R - Retract acceleration. Filament pull-back and push-forward while standing still in the other axes @@ -210,7 +214,19 @@ class Planner { #endif #endif #else - static float max_jerk[XYZE]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. + static float max_jerk[NUM_AXIS]; // (mm/s^2) M205 XYZE - The largest speed change requiring no acceleration. + #endif + + #if ENABLED(LINE_BUILDUP_COMPENSATION_FEATURE) + /* + * Parameters for calculating target[] + * See buildup compensation theory: + * https://vitana.se/opr3d/tbear/2017.html#hangprinter_project_29 + */ + static float k0[MOV_AXIS], + k1[MOV_AXIS], + k2[MOV_AXIS], + sqrtk1[MOV_AXIS]; #endif #if HAS_LEVELING @@ -230,7 +246,7 @@ class Planner { #endif #if HAS_POSITION_FLOAT - static float position_float[XYZE]; + static float position_float[NUM_AXIS]; #endif #if ENABLED(SKEW_CORRECTION) @@ -429,11 +445,17 @@ class Planner { #define ARG_X float rx #define ARG_Y float ry #define ARG_Z float rz + #if ENABLED(HANGPRINTER) + #define ARG_E1 float re1 + #endif static void unapply_leveling(float raw[XYZ]); #else #define ARG_X const float &rx #define ARG_Y const float &ry #define ARG_Z const float &rz + #if ENABLED(HANGPRINTER) + #define ARG_E1 const float &re1 + #endif #endif // Number of moves currently in the planner including the busy block, if any @@ -477,14 +499,18 @@ class Planner { * fr_mm_s - (target) speed of the move * extruder - target extruder * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) * * Returns true if movement was buffered, false otherwise */ - static bool _buffer_steps(const int32_t (&target)[XYZE] + static bool _buffer_steps(const int32_t (&target)[NUM_AXIS] #if HAS_POSITION_FLOAT - , const float (&target_float)[XYZE] + , const float (&target_float)[NUM_AXIS] #endif , float fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it=true + #endif ); /** @@ -496,15 +522,19 @@ class Planner { * fr_mm_s - (target) speed of the move * extruder - target extruder * millimeters - the length of the movement, if known + * count_it - apply this move to the counters (UNREGISTERED_MOVE_SUPPORT) * * Returns true is movement is acceptable, false otherwise */ static bool _populate_block(block_t * const block, bool split_move, - const int32_t (&target)[XYZE] + const int32_t (&target)[NUM_AXIS] #if HAS_POSITION_FLOAT - , const float (&target_float)[XYZE] + , const float (&target_float)[NUM_AXIS] #endif , float fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , const bool count_it=true + #endif ); /** @@ -521,13 +551,28 @@ class Planner { * Leveling and kinematics should be applied ahead of calling this. * * a,b,c,e - target positions in mm and/or degrees + * (a, b, c, d, e for Hangprinter) * fr_mm_s - (target) speed of the move * extruder - target extruder * millimeters - the length of the movement, if known + * count_it - remember this move in its counters (UNREGISTERED_MOVE_SUPPORT) */ - static bool buffer_segment(const float &a, const float &b, const float &c, const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0); + static bool buffer_segment(const float &a, const float &b, const float &c, + #if ENABLED(HANGPRINTER) + const float &d, + #endif + const float &e, const float &fr_mm_s, const uint8_t extruder, const float &millimeters=0.0 + #if ENABLED(UNREGISTERED_MOVE_SUPPORT) + , bool count_it=true + #endif + ); - static void _set_position_mm(const float &a, const float &b, const float &c, const float &e); + static void _set_position_mm(const float &a, const float &b, const float &c, + #if ENABLED(HANGPRINTER) + const float &d, + #endif + const float &e + ); /** * Add a new linear movement to the buffer. @@ -538,15 +583,26 @@ class Planner { * (Cartesians may also call buffer_line_kinematic.) * * rx,ry,rz,e - target position in mm or degrees + * (rx, ry, rz, re1 for Hangprinter) * fr_mm_s - (target) speed of the move (mm/s) * extruder - target extruder * millimeters - the length of the movement, if known */ - FORCE_INLINE static bool buffer_line(ARG_X, ARG_Y, ARG_Z, const float &e, const float &fr_mm_s, const uint8_t extruder, const float millimeters = 0.0) { + FORCE_INLINE static bool buffer_line(ARG_X, ARG_Y, ARG_Z, + #if ENABLED(HANGPRINTER) + ARG_E1, + #endif + const float &e, const float &fr_mm_s, const uint8_t extruder, const float millimeters = 0.0 + ) { #if PLANNER_LEVELING && IS_CARTESIAN apply_leveling(rx, ry, rz); #endif - return buffer_segment(rx, ry, rz, e, fr_mm_s, extruder, millimeters); + return buffer_segment(rx, ry, rz, + #if ENABLED(HANGPRINTER) + re1, + #endif + e, fr_mm_s, extruder, millimeters + ); } /** @@ -568,9 +624,16 @@ class Planner { #endif #if IS_KINEMATIC inverse_kinematics(raw); - return buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], cart[E_AXIS], fr_mm_s, extruder, millimeters); + return buffer_segment( + #if ENABLED(HANGPRINTER) + line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS] + #else + delta[A_AXIS], delta[B_AXIS], delta[C_AXIS] + #endif + , cart[E_CART], fr_mm_s, extruder, millimeters + ); #else - return buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_AXIS], fr_mm_s, extruder, millimeters); + return buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], cart[E_CART], fr_mm_s, extruder, millimeters); #endif } @@ -583,11 +646,21 @@ class Planner { * * Clears previous speed values. */ - FORCE_INLINE static void set_position_mm(ARG_X, ARG_Y, ARG_Z, const float &e) { + FORCE_INLINE static void set_position_mm(ARG_X, ARG_Y, ARG_Z, + #if ENABLED(HANGPRINTER) + ARG_E1, + #endif + const float &e + ) { #if PLANNER_LEVELING && IS_CARTESIAN apply_leveling(rx, ry, rz); #endif - _set_position_mm(rx, ry, rz, e); + _set_position_mm(rx, ry, rz, + #if ENABLED(HANGPRINTER) + re1, + #endif + e + ); } static void set_position_mm_kinematic(const float (&cart)[XYZE]); static void set_position_mm(const AxisEnum axis, const float &v); diff --git a/Marlin/planner_bezier.cpp b/Marlin/planner_bezier.cpp index fdb4bab86b..6edc02b56c 100644 --- a/Marlin/planner_bezier.cpp +++ b/Marlin/planner_bezier.cpp @@ -105,17 +105,17 @@ inline static float dist1(float x1, float y1, float x2, float y2) { return ABS(x * the mitigation offered by MIN_STEP and the small computational * power available on Arduino, I think it is not wise to implement it. */ -void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS], const float offset[4], float fr_mm_s, uint8_t extruder) { +void cubic_b_spline(const float pos[XYZE], const float cart_target[XYZE], const float offset[4], float fr_mm_s, uint8_t extruder) { // Absolute first and second control points are recovered. - const float first0 = position[X_AXIS] + offset[0], - first1 = position[Y_AXIS] + offset[1], - second0 = target[X_AXIS] + offset[2], - second1 = target[Y_AXIS] + offset[3]; + const float first0 = pos[X_AXIS] + offset[0], + first1 = pos[Y_AXIS] + offset[1], + second0 = cart_target[X_AXIS] + offset[2], + second1 = cart_target[Y_AXIS] + offset[3]; float t = 0; - float bez_target[4]; - bez_target[X_AXIS] = position[X_AXIS]; - bez_target[Y_AXIS] = position[Y_AXIS]; + float bez_target[XYZE]; + bez_target[X_AXIS] = pos[X_AXIS]; + bez_target[Y_AXIS] = pos[Y_AXIS]; float step = MAX_STEP; millis_t next_idle_ms = millis() + 200UL; @@ -134,13 +134,13 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] bool did_reduce = false; float new_t = t + step; NOMORE(new_t, 1); - float new_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], new_t), - new_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], new_t); + float new_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], new_t), + new_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], new_t); for (;;) { if (new_t - t < (MIN_STEP)) break; const float candidate_t = 0.5f * (t + new_t), - candidate_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], candidate_t), - candidate_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], candidate_t), + candidate_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], candidate_t), + candidate_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], candidate_t), interp_pos0 = 0.5f * (bez_target[X_AXIS] + new_pos0), interp_pos1 = 0.5f * (bez_target[Y_AXIS] + new_pos1); if (dist1(candidate_pos0, candidate_pos1, interp_pos0, interp_pos1) <= (SIGMA)) break; @@ -155,8 +155,8 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] if (new_t - t > MAX_STEP) break; const float candidate_t = t + 2 * (new_t - t); if (candidate_t >= 1) break; - const float candidate_pos0 = eval_bezier(position[X_AXIS], first0, second0, target[X_AXIS], candidate_t), - candidate_pos1 = eval_bezier(position[Y_AXIS], first1, second1, target[Y_AXIS], candidate_t), + const float candidate_pos0 = eval_bezier(pos[X_AXIS], first0, second0, cart_target[X_AXIS], candidate_t), + candidate_pos1 = eval_bezier(pos[Y_AXIS], first1, second1, cart_target[Y_AXIS], candidate_t), interp_pos0 = 0.5f * (bez_target[X_AXIS] + candidate_pos0), interp_pos1 = 0.5f * (bez_target[Y_AXIS] + candidate_pos1); if (dist1(new_pos0, new_pos1, interp_pos0, interp_pos1) > (SIGMA)) break; @@ -184,14 +184,14 @@ void cubic_b_spline(const float position[NUM_AXIS], const float target[NUM_AXIS] bez_target[Y_AXIS] = new_pos1; // FIXME. The following two are wrong, since the parameter t is // not linear in the distance. - bez_target[Z_AXIS] = interp(position[Z_AXIS], target[Z_AXIS], t); - bez_target[E_AXIS] = interp(position[E_AXIS], target[E_AXIS], t); + bez_target[Z_AXIS] = interp(pos[Z_AXIS], cart_target[Z_AXIS], t); + bez_target[E_CART] = interp(pos[E_CART], cart_target[E_CART], t); clamp_to_software_endstops(bez_target); #if HAS_UBL_AND_CURVES - float pos[XYZ] = { bez_target[X_AXIS], bez_target[Y_AXIS], bez_target[Z_AXIS] }; - planner.apply_leveling(pos); - if (!planner.buffer_segment(pos[X_AXIS], pos[Y_AXIS], pos[Z_AXIS], bez_target[E_AXIS], fr_mm_s, active_extruder)) + float bez_copy[XYZ] = { bez_target[X_AXIS], bez_target[Y_AXIS], bez_target[Z_AXIS] }; + planner.apply_leveling(bez_copy); + if (!planner.buffer_segment(bez_copy[X_AXIS], bez_copy[Y_AXIS], bez_copy[Z_AXIS], bez_target[E_CART], fr_mm_s, active_extruder)) break; #else if (!planner.buffer_line_kinematic(bez_target, fr_mm_s, extruder)) diff --git a/Marlin/power.cpp b/Marlin/power.cpp index df0579153a..2f4708b075 100644 --- a/Marlin/power.cpp +++ b/Marlin/power.cpp @@ -49,27 +49,39 @@ bool Power::is_power_needed() { if (controllerFanSpeed > 0) return true; #endif + // If any of the drivers or the bed are enabled... if (X_ENABLE_READ == X_ENABLE_ON || Y_ENABLE_READ == Y_ENABLE_ON || Z_ENABLE_READ == Z_ENABLE_ON - #if HAS_HEATED_BED - || thermalManager.soft_pwm_amount_bed > 0 + #if HAS_HEATED_BED + || thermalManager.soft_pwm_amount_bed > 0 + #endif + #if HAS_X2_ENABLE + || X2_ENABLE_READ == X_ENABLE_ON #endif - || E0_ENABLE_READ == E_ENABLE_ON // If any of the drivers are enabled... + #if HAS_Y2_ENABLE + || Y2_ENABLE_READ == Y_ENABLE_ON + #endif + #if HAS_Z2_ENABLE + || Z2_ENABLE_READ == Z_ENABLE_ON + #endif + || E0_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 1 || E1_ENABLE_READ == E_ENABLE_ON - #if HAS_X2_ENABLE - || X2_ENABLE_READ == X_ENABLE_ON - #endif #if E_STEPPERS > 2 || E2_ENABLE_READ == E_ENABLE_ON #if E_STEPPERS > 3 || E3_ENABLE_READ == E_ENABLE_ON + #if E_STEPPERS > 4 + || E4_ENABLE_READ == E_ENABLE_ON + #endif #endif #endif #endif ) return true; HOTEND_LOOP() if (thermalManager.degTargetHotend(e) > 0) return true; - if (thermalManager.degTargetBed() > 0) return true; + #if HAS_HEATED_BED + if (thermalManager.degTargetBed() > 0) return true; + #endif return false; } diff --git a/Marlin/power_loss_recovery.cpp b/Marlin/power_loss_recovery.cpp index 8534fd8fe0..fef41f3a49 100644 --- a/Marlin/power_loss_recovery.cpp +++ b/Marlin/power_loss_recovery.cpp @@ -159,7 +159,7 @@ void check_print_job_recovery() { #endif dtostrf(job_recovery_info.current_position[Z_AXIS] + 2, 1, 3, str_1); - dtostrf(job_recovery_info.current_position[E_AXIS] + dtostrf(job_recovery_info.current_position[E_CART] #if ENABLED(SAVE_EACH_CMD_MODE) - 5 #endif @@ -201,12 +201,19 @@ void save_job_recovery_info() { millis_t ms = millis(); #endif if ( - #if SAVE_INFO_INTERVAL_MS > 0 - ELAPSED(ms, next_save_ms) || - #endif + // Save on every command #if ENABLED(SAVE_EACH_CMD_MODE) true #else + // Save if power loss pin is triggered + #if PIN_EXISTS(POWER_LOSS) + READ(POWER_LOSS_PIN) == POWER_LOSS_STATE || + #endif + // Save if interval is elapsed + #if SAVE_INFO_INTERVAL_MS > 0 + ELAPSED(ms, next_save_ms) || + #endif + // Save on every new Z height (current_position[Z_AXIS] > 0 && current_position[Z_AXIS] > job_recovery_info.current_position[Z_AXIS]) #endif ) { @@ -266,6 +273,11 @@ void save_job_recovery_info() { card.openJobRecoveryFile(false); (void)card.saveJobRecoveryInfo(); + + // If power-loss pin was triggered, write just once then kill + #if PIN_EXISTS(POWER_LOSS) + if (READ(POWER_LOSS_PIN) == POWER_LOSS_STATE) kill(MSG_POWER_LOSS_RECOVERY); + #endif } } diff --git a/Marlin/runout.h b/Marlin/runout.h index c4c88b6c15..0bfda721a3 100644 --- a/Marlin/runout.h +++ b/Marlin/runout.h @@ -45,7 +45,7 @@ class FilamentRunoutSensor { FORCE_INLINE static void reset() { runout_count = 0; filament_ran_out = false; } FORCE_INLINE static void run() { - if ((IS_SD_PRINTING || print_job_timer.isRunning()) && check() && !filament_ran_out) { + if ((IS_SD_PRINTING() || print_job_timer.isRunning()) && check() && !filament_ran_out) { filament_ran_out = true; enqueue_and_echo_commands_P(PSTR(FILAMENT_RUNOUT_SCRIPT)); planner.synchronize(); diff --git a/Marlin/status_screen_DOGM.h b/Marlin/status_screen_DOGM.h index 038351cc81..98678807be 100644 --- a/Marlin/status_screen_DOGM.h +++ b/Marlin/status_screen_DOGM.h @@ -126,7 +126,7 @@ inline void lcd_implementation_status_message(const bool blink) { static bool last_blink = false; // Get the UTF8 character count of the string - uint8_t slen = lcd_strlen(lcd_status_message); + uint8_t slen = utf8_strlen(lcd_status_message); // If the string fits into the LCD, just print it and do not scroll it if (slen <= LCD_WIDTH) { @@ -147,7 +147,7 @@ inline void lcd_implementation_status_message(const bool blink) { const char *stat = lcd_status_message + status_scroll_offset; // Get the string remaining length - const uint8_t rlen = lcd_strlen(stat); + const uint8_t rlen = utf8_strlen(stat); // If we have enough characters to display if (rlen >= LCD_WIDTH) { @@ -183,7 +183,7 @@ inline void lcd_implementation_status_message(const bool blink) { UNUSED(blink); // Get the UTF8 character count of the string - uint8_t slen = lcd_strlen(lcd_status_message); + uint8_t slen = utf8_strlen(lcd_status_message); // Just print the string to the LCD lcd_print_utf(lcd_status_message, LCD_WIDTH); diff --git a/Marlin/status_screen_lite_ST7920.h b/Marlin/status_screen_lite_ST7920.h index 2acb6a9736..dcbe065478 100644 --- a/Marlin/status_screen_lite_ST7920.h +++ b/Marlin/status_screen_lite_ST7920.h @@ -395,7 +395,7 @@ void ST7920_Lite_Status_Screen::draw_degree_symbol(uint8_t x, uint8_t y, bool dr const uint8_t x_word = x >> 1; const uint8_t y_top = degree_symbol_y_top; const uint8_t y_bot = y_top + sizeof(degree_symbol)/sizeof(degree_symbol[0]); - for(uint8_t i = y_top; i < y_bot; i++) { + for (uint8_t i = y_top; i < y_bot; i++) { uint8_t byte = pgm_read_byte_near(p_bytes++); set_gdram_address(x_word,i+y*16); begin_data(); @@ -419,7 +419,7 @@ void ST7920_Lite_Status_Screen::draw_static_elements() { // Draw the static icons in GDRAM draw_gdram_icon(1, 1, nozzle_icon); - #if EXTRUDERS == 2 + #if HOTENDS > 1 draw_gdram_icon(1,2,nozzle_icon); draw_gdram_icon(1,3,bed_icon); #else @@ -440,7 +440,7 @@ void ST7920_Lite_Status_Screen::draw_static_elements() { * text data (the percentage). */ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { - #if EXTRUDERS == 1 + #if HOTENDS == 1 // If we have only one extruder, draw a long progress bar on the third line const uint8_t top = 1, // Top in pixels bottom = 13, // Bottom in pixels @@ -477,7 +477,7 @@ void ST7920_Lite_Status_Screen::draw_progress_bar(const uint8_t value) { } // Draw the percentage as text in DDRAM - #if EXTRUDERS == 1 + #if HOTENDS == 1 set_ddram_address(DDRAM_LINE_3 + 4); begin_data(); write_byte(' '); @@ -505,7 +505,7 @@ void ST7920_Lite_Status_Screen::draw_fan_icon(const bool whichIcon) { void ST7920_Lite_Status_Screen::draw_heat_icon(const bool whichIcon, const bool heating) { set_ddram_address( - #if EXTRUDERS == 1 + #if HOTENDS == 1 DDRAM_LINE_2 #else DDRAM_LINE_3 @@ -573,7 +573,7 @@ void ST7920_Lite_Status_Screen::draw_extruder_2_temp(const int16_t temp, const i void ST7920_Lite_Status_Screen::draw_bed_temp(const int16_t temp, const int16_t target, bool forceUpdate) { const bool show_target = target && FAR(temp, target); draw_temps(2 - #if EXTRUDERS > 1 + #if HOTENDS > 1 + 1 #endif , temp, target, show_target, display_state.bed_show_target != show_target || forceUpdate @@ -590,7 +590,7 @@ void ST7920_Lite_Status_Screen::draw_fan_speed(const uint8_t value) { } void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) { - #if EXTRUDERS == 1 + #if HOTENDS == 1 set_ddram_address(DDRAM_LINE_3); #else set_ddram_address(DDRAM_LINE_3 + 5); @@ -604,7 +604,7 @@ void ST7920_Lite_Status_Screen::draw_print_time(const duration_t &elapsed) { void ST7920_Lite_Status_Screen::draw_feedrate_percentage(const uint8_t percentage) { // We only have enough room for the feedrate when // we have one extruder - #if EXTRUDERS == 1 + #if HOTENDS == 1 set_ddram_address(DDRAM_LINE_2 + 6); begin_data(); write_number(percentage, 3); @@ -618,7 +618,7 @@ void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { const uint8_t lcd_len = 16; #if ENABLED(STATUS_MESSAGE_SCROLLING) - uint8_t slen = lcd_strlen(str); + uint8_t slen = utf8_strlen(str); // If the string fits into the LCD, just print it and do not scroll it if (slen <= lcd_len) { @@ -639,7 +639,7 @@ void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { const char *stat = str + status_scroll_offset; // Get the string remaining length - const uint8_t rlen = lcd_strlen(stat); + const uint8_t rlen = utf8_strlen(stat); // If we have enough characters to display if (rlen >= lcd_len) { @@ -670,7 +670,7 @@ void ST7920_Lite_Status_Screen::draw_status_message(const char *str) { } #else // Get the UTF8 character count of the string - uint8_t slen = lcd_strlen(str); + uint8_t slen = utf8_strlen(str); // Just print the string to the LCD write_str(str, lcd_len); @@ -712,7 +712,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { const uint8_t feedrate_perc = feedrate_percentage; const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const int16_t extruder_1_target = thermalManager.degTargetHotend(0); - #if EXTRUDERS == 2 + #if HOTENDS > 1 const int16_t extruder_2_target = thermalManager.degTargetHotend(1); #endif #if HAS_HEATED_BED @@ -720,7 +720,7 @@ bool ST7920_Lite_Status_Screen::indicators_changed() { #endif static uint16_t last_checksum = 0; const uint16_t checksum = blink ^ feedrate_perc ^ fan_speed ^ extruder_1_target - #if EXTRUDERS == 2 + #if HOTENDS > 1 ^ extruder_2_target #endif #if HAS_HEATED_BED @@ -740,7 +740,7 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { const uint8_t fan_speed = ((fanSpeeds[0] + 1) * 100) / 256; const int16_t extruder_1_temp = thermalManager.degHotend(0), extruder_1_target = thermalManager.degTargetHotend(0); - #if EXTRUDERS == 2 + #if HOTENDS > 1 const int16_t extruder_2_temp = thermalManager.degHotend(1), extruder_2_target = thermalManager.degTargetHotend(1); #endif @@ -750,7 +750,7 @@ void ST7920_Lite_Status_Screen::update_indicators(const bool forceUpdate) { #endif draw_extruder_1_temp(extruder_1_temp, extruder_1_target, forceUpdate); - #if EXTRUDERS == 2 + #if HOTENDS > 1 draw_extruder_2_temp(extruder_2_temp, extruder_2_target, forceUpdate); #endif #if HAS_HEATED_BED @@ -876,24 +876,32 @@ void ST7920_Lite_Status_Screen::update_status_or_position(bool forceUpdate) { } void ST7920_Lite_Status_Screen::update_progress(const bool forceUpdate) { - #if DISABLED(LCD_SET_PROGRESS_MANUALLY) - uint8_t progress_bar_percent; - #endif + #if ENABLED(LCD_SET_PROGRESS_MANUALLY) || ENABLED(SDSUPPORT) - // Set current percentage from SD when actively printing - #if ENABLED(SDSUPPORT) - if (IS_SD_PRINTING) progress_bar_percent = card.percentDone(); - #endif + #if DISABLED(LCD_SET_PROGRESS_MANUALLY) + uint8_t progress_bar_percent = 0; + #endif - // Since the progress bar involves writing - // quite a few bytes to GDRAM, only do this - // when an update is actually necessary. + #if ENABLED(SDSUPPORT) + // Progress bar % comes from SD when actively printing + if (IS_SD_PRINTING()) progress_bar_percent = card.percentDone(); + #endif - static uint8_t last_progress = 0; - if (!forceUpdate && last_progress == progress_bar_percent) return; - last_progress = progress_bar_percent; + // Since the progress bar involves writing + // quite a few bytes to GDRAM, only do this + // when an update is actually necessary. - draw_progress_bar(progress_bar_percent); + static uint8_t last_progress = 0; + if (!forceUpdate && last_progress == progress_bar_percent) return; + last_progress = progress_bar_percent; + + draw_progress_bar(progress_bar_percent); + + #else + + UNUSED(forceUpdate); + + #endif // LCD_SET_PROGRESS_MANUALLY || SDSUPPORT } void ST7920_Lite_Status_Screen::update(const bool forceUpdate) { diff --git a/Marlin/stepper.cpp b/Marlin/stepper.cpp index 8c965c45da..0bbda6de1c 100644 --- a/Marlin/stepper.cpp +++ b/Marlin/stepper.cpp @@ -135,9 +135,8 @@ uint8_t Stepper::steps_per_isr; #endif uint8_t Stepper::oversampling_factor; -int32_t Stepper::delta_error[XYZE] = { 0 }; - -uint32_t Stepper::advance_dividend[XYZE] = { 0 }, +int32_t Stepper::delta_error[NUM_AXIS] = { 0 }; +uint32_t Stepper::advance_dividend[NUM_AXIS] = { 0 }, Stepper::advance_divisor = 0, Stepper::step_events_completed = 0, // The number of step events executed in the current block Stepper::accelerate_until, // The point from where we need to stop acceleration @@ -180,14 +179,19 @@ uint32_t Stepper::nextMainISR = 0; #endif // LIN_ADVANCE int32_t Stepper::ticks_nominal = -1; + #if DISABLED(S_CURVE_ACCELERATION) uint32_t Stepper::acc_step_rate; // needed for deceleration start point #endif -volatile int32_t Stepper::endstops_trigsteps[XYZ]; - -volatile int32_t Stepper::count_position[NUM_AXIS] = { 0 }; -int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 }; +volatile int32_t Stepper::endstops_trigsteps[XYZ], + Stepper::count_position[NUM_AXIS] = { 0 }; +int8_t Stepper::count_direction[NUM_AXIS] = { + 1, 1, 1, 1 + #if ENABLED(HANGPRINTER) + , 1 + #endif +}; #if ENABLED(X_DUAL_ENDSTOPS) || ENABLED(Y_DUAL_ENDSTOPS) || ENABLED(Z_DUAL_ENDSTOPS) #define DUAL_ENDSTOP_APPLY_STEP(A,V) \ @@ -260,6 +264,28 @@ int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 }; #define Z_APPLY_STEP(v,Q) Z_STEP_WRITE(v) #endif +/** + * Hangprinter's mapping {A,B,C,D} <-> {X,Y,Z,E1} happens here. + * If you have two extruders: {A,B,C,D} <-> {X,Y,Z,E2} + * ... etc up to max 4 extruders. + * Place D connector on your first "free" extruder output. + */ +#if ENABLED(HANGPRINTER) + #define A_APPLY_DIR(v,Q) X_APPLY_DIR(v,Q) + #define A_APPLY_STEP(v,Q) X_APPLY_STEP(v,Q) + + #define B_APPLY_DIR(v,Q) Y_APPLY_DIR(v,Q) + #define B_APPLY_STEP(v,Q) Y_APPLY_STEP(v,Q) + + #define C_APPLY_DIR(v,Q) Z_APPLY_DIR(v,Q) + #define C_APPLY_STEP(v,Q) Z_APPLY_STEP(v,Q) + + #define __D_APPLY(I,T,v) E##I##_##T##_WRITE(v) + #define _D_APPLY(I,T,v) __D_APPLY(I,T,v) + #define D_APPLY_DIR(v,Q) _D_APPLY(EXTRUDERS, DIR, v) + #define D_APPLY_STEP(v,Q) _D_APPLY(EXTRUDERS, STEP, v) +#endif + #if DISABLED(MIXING_EXTRUDER) #define E_APPLY_STEP(v,Q) E_STEP_WRITE(active_extruder, v) #endif @@ -357,6 +383,9 @@ void Stepper::set_directions() { #if HAS_Z_DIR SET_STEP_DIR(Z); // C #endif + #if ENABLED(HANGPRINTER) + SET_STEP_DIR(D); + #endif #if DISABLED(LIN_ADVANCE) #if ENABLED(MIXING_EXTRUDER) @@ -1251,6 +1280,12 @@ void Stepper::isr() { * call to this method that might cause variation in the timing. The aim * is to keep pulse timing as regular as possible. */ +#if ENABLED(UNREGISTERED_MOVE_SUPPORT) + #define COUNT_IT current_block->count_it +#else + #define COUNT_IT true +#endif + void Stepper::stepper_pulse_phase_isr() { // If we must abort the current block, do so! @@ -1289,7 +1324,7 @@ void Stepper::stepper_pulse_phase_isr() { delta_error[_AXIS(AXIS)] += advance_dividend[_AXIS(AXIS)]; \ if (delta_error[_AXIS(AXIS)] >= 0) { \ _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), 0); \ - count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \ + if (COUNT_IT) count_position[_AXIS(AXIS)] += count_direction[_AXIS(AXIS)]; \ } \ }while(0) @@ -1302,22 +1337,37 @@ void Stepper::stepper_pulse_phase_isr() { }while(0) // Pulse start - #if HAS_X_STEP - PULSE_START(X); - #endif - #if HAS_Y_STEP - PULSE_START(Y); - #endif - #if HAS_Z_STEP - PULSE_START(Z); - #endif + #if ENABLED(HANGPRINTER) + #if HAS_A_STEP + PULSE_START(A); + #endif + #if HAS_B_STEP + PULSE_START(B); + #endif + #if HAS_C_STEP + PULSE_START(C); + #endif + #if HAS_D_STEP + PULSE_START(D); + #endif + #else + #if HAS_X_STEP + PULSE_START(X); + #endif + #if HAS_Y_STEP + PULSE_START(Y); + #endif + #if HAS_Z_STEP + PULSE_START(Z); + #endif + #endif // HANGPRINTER // Pulse E/Mixing extruders #if ENABLED(LIN_ADVANCE) // Tick the E axis, correct error term and update position delta_error[E_AXIS] += advance_dividend[E_AXIS]; if (delta_error[E_AXIS] >= 0) { - count_position[E_AXIS] += count_direction[E_AXIS]; + if (COUNT_IT) count_position[E_AXIS] += count_direction[E_AXIS]; delta_error[E_AXIS] -= advance_divisor; // Don't step E here - But remember the number of steps to perform @@ -1329,7 +1379,7 @@ void Stepper::stepper_pulse_phase_isr() { // Tick the E axis delta_error[E_AXIS] += advance_dividend[E_AXIS]; if (delta_error[E_AXIS] >= 0) { - count_position[E_AXIS] += count_direction[E_AXIS]; + if (COUNT_IT) count_position[E_AXIS] += count_direction[E_AXIS]; delta_error[E_AXIS] -= advance_divisor; } @@ -1354,15 +1404,29 @@ void Stepper::stepper_pulse_phase_isr() { // Add the delay needed to ensure the maximum driver rate is enforced if (signed(added_step_ticks) > 0) pulse_end += hal_timer_t(added_step_ticks); - // Pulse stop - #if HAS_X_STEP - PULSE_STOP(X); - #endif - #if HAS_Y_STEP - PULSE_STOP(Y); - #endif - #if HAS_Z_STEP - PULSE_STOP(Z); + #if ENABLED(HANGPRINTER) + #if HAS_A_STEP + PULSE_STOP(A); + #endif + #if HAS_B_STEP + PULSE_STOP(B); + #endif + #if HAS_C_STEP + PULSE_STOP(C); + #endif + #if HAS_D_STEP + PULSE_STOP(D); + #endif + #else + #if HAS_X_STEP + PULSE_STOP(X); + #endif + #if HAS_Y_STEP + PULSE_STOP(Y); + #endif + #if HAS_Z_STEP + PULSE_STOP(Z); + #endif #endif #if DISABLED(LIN_ADVANCE) @@ -1437,16 +1501,10 @@ uint32_t Stepper::stepper_block_phase_isr() { #if ENABLED(LIN_ADVANCE) if (LA_use_advance_lead) { - // Wake up eISR on first acceleration loop and fire ISR if final adv_rate is reached - if (step_events_completed == steps_per_isr || (LA_steps && LA_isr_rate != current_block->advance_speed)) { - nextAdvanceISR = 0; - LA_isr_rate = current_block->advance_speed; - } - } - else { - LA_isr_rate = LA_ADV_NEVER; - if (LA_steps) nextAdvanceISR = 0; + // Fire ISR if final adv_rate is reached + if (LA_steps && LA_isr_rate != current_block->advance_speed) nextAdvanceISR = 0; } + else if (LA_steps) nextAdvanceISR = 0; #endif // LIN_ADVANCE } // Are we in Deceleration phase ? @@ -1488,17 +1546,13 @@ uint32_t Stepper::stepper_block_phase_isr() { #if ENABLED(LIN_ADVANCE) if (LA_use_advance_lead) { - if (step_events_completed <= decelerate_after + steps_per_isr || - (LA_steps && LA_isr_rate != current_block->advance_speed) - ) { - nextAdvanceISR = 0; // Wake up eISR on first deceleration loop + // Wake up eISR on first deceleration loop and fire ISR if final adv_rate is reached + if (step_events_completed <= decelerate_after + steps_per_isr || (LA_steps && LA_isr_rate != current_block->advance_speed)) { + nextAdvanceISR = 0; LA_isr_rate = current_block->advance_speed; } } - else { - LA_isr_rate = LA_ADV_NEVER; - if (LA_steps) nextAdvanceISR = 0; - } + else if (LA_steps) nextAdvanceISR = 0; #endif // LIN_ADVANCE } // We must be in cruise phase otherwise @@ -1531,8 +1585,11 @@ uint32_t Stepper::stepper_block_phase_isr() { // Sync block? Sync the stepper counts and return while (TEST(current_block->flag, BLOCK_BIT_SYNC_POSITION)) { _set_position( - current_block->position[A_AXIS], current_block->position[B_AXIS], - current_block->position[C_AXIS], current_block->position[E_AXIS] + current_block->position[A_AXIS], current_block->position[B_AXIS], current_block->position[C_AXIS], + #if ENABLED(HANGPRINTER) + current_block->position[D_AXIS], + #endif + current_block->position[E_AXIS] ); planner.discard_current_block(); @@ -1633,12 +1690,23 @@ uint32_t Stepper::stepper_block_phase_isr() { step_event_count = current_block->step_event_count << oversampling; // Initialize Bresenham delta errors to 1/2 - delta_error[X_AXIS] = delta_error[Y_AXIS] = delta_error[Z_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + #if ENABLED(HANGPRINTER) + delta_error[A_AXIS] = delta_error[B_AXIS] = delta_error[C_AXIS] = delta_error[D_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + #else + delta_error[X_AXIS] = delta_error[Y_AXIS] = delta_error[Z_AXIS] = delta_error[E_AXIS] = -int32_t(step_event_count); + #endif // Calculate Bresenham dividends - advance_dividend[X_AXIS] = current_block->steps[X_AXIS] << 1; - advance_dividend[Y_AXIS] = current_block->steps[Y_AXIS] << 1; - advance_dividend[Z_AXIS] = current_block->steps[Z_AXIS] << 1; + #if ENABLED(HANGPRINTER) + advance_dividend[A_AXIS] = current_block->steps[A_AXIS] << 1; + advance_dividend[B_AXIS] = current_block->steps[B_AXIS] << 1; + advance_dividend[C_AXIS] = current_block->steps[C_AXIS] << 1; + advance_dividend[D_AXIS] = current_block->steps[D_AXIS] << 1; + #else + advance_dividend[X_AXIS] = current_block->steps[X_AXIS] << 1; + advance_dividend[Y_AXIS] = current_block->steps[Y_AXIS] << 1; + advance_dividend[Z_AXIS] = current_block->steps[Z_AXIS] << 1; + #endif advance_dividend[E_AXIS] = current_block->steps[E_AXIS] << 1; // Calculate Bresenham divisor @@ -1678,7 +1746,11 @@ uint32_t Stepper::stepper_block_phase_isr() { if ((LA_use_advance_lead = current_block->use_advance_lead)) { LA_final_adv_steps = current_block->final_adv_steps; LA_max_adv_steps = current_block->max_adv_steps; + //Start the ISR + nextAdvanceISR = 0; + LA_isr_rate = current_block->advance_speed; } + else LA_isr_rate = LA_ADV_NEVER; #endif if (current_block->direction_bits != last_direction_bits @@ -1982,16 +2054,16 @@ void Stepper::init() { #if E_STEPPERS > 0 && HAS_E0_STEP E_AXIS_INIT(0); #endif - #if E_STEPPERS > 1 && HAS_E1_STEP + #if (E_STEPPERS > 1 || (E_STEPPERS == 1 && ENABLED(HANGPRINTER))) && HAS_E1_STEP E_AXIS_INIT(1); #endif - #if E_STEPPERS > 2 && HAS_E2_STEP + #if (E_STEPPERS > 2 || (E_STEPPERS == 2 && ENABLED(HANGPRINTER))) && HAS_E2_STEP E_AXIS_INIT(2); #endif - #if E_STEPPERS > 3 && HAS_E3_STEP + #if (E_STEPPERS > 3 || (E_STEPPERS == 3 && ENABLED(HANGPRINTER))) && HAS_E3_STEP E_AXIS_INIT(3); #endif - #if E_STEPPERS > 4 && HAS_E4_STEP + #if (E_STEPPERS > 4 || (E_STEPPERS == 4 && ENABLED(HANGPRINTER))) && HAS_E4_STEP E_AXIS_INIT(4); #endif @@ -2015,7 +2087,12 @@ void Stepper::init() { * This allows get_axis_position_mm to correctly * derive the current XYZ position later on. */ -void Stepper::_set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) { +void Stepper::_set_position(const int32_t &a, const int32_t &b, const int32_t &c, + #if ENABLED(HANGPRINTER) + const int32_t &d, + #endif + const int32_t &e +) { #if CORE_IS_XY // corexy positioning // these equations follow the form of the dA and dB equations on http://www.corexy.com/theory.html @@ -2037,6 +2114,9 @@ void Stepper::_set_position(const int32_t &a, const int32_t &b, const int32_t &c count_position[X_AXIS] = a; count_position[Y_AXIS] = b; count_position[Z_AXIS] = c; + #if ENABLED(HANGPRINTER) + count_position[D_AXIS] = d; + #endif #endif count_position[E_AXIS] = e; } @@ -2103,31 +2183,38 @@ void Stepper::report_positions() { const int32_t xpos = count_position[X_AXIS], ypos = count_position[Y_AXIS], + #if ENABLED(HANGPRINTER) + dpos = count_position[D_AXIS], + #endif zpos = count_position[Z_AXIS]; if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); - #if CORE_IS_XY || CORE_IS_XZ || IS_DELTA || IS_SCARA + #if CORE_IS_XY || CORE_IS_XZ || IS_DELTA || IS_SCARA || ENABLED(HANGPRINTER) SERIAL_PROTOCOLPGM(MSG_COUNT_A); #else SERIAL_PROTOCOLPGM(MSG_COUNT_X); #endif SERIAL_PROTOCOL(xpos); - #if CORE_IS_XY || CORE_IS_YZ || IS_DELTA || IS_SCARA + #if CORE_IS_XY || CORE_IS_YZ || IS_DELTA || IS_SCARA || ENABLED(HANGPRINTER) SERIAL_PROTOCOLPGM(" B:"); #else SERIAL_PROTOCOLPGM(" Y:"); #endif SERIAL_PROTOCOL(ypos); - #if CORE_IS_XZ || CORE_IS_YZ || IS_DELTA + #if CORE_IS_XZ || CORE_IS_YZ || IS_DELTA || ENABLED(HANGPRINTER) SERIAL_PROTOCOLPGM(" C:"); #else SERIAL_PROTOCOLPGM(" Z:"); #endif SERIAL_PROTOCOL(zpos); + #if ENABLED(HANGPRINTER) + SERIAL_PROTOCOLPAIR(" D:", dpos); + #endif + SERIAL_EOL(); } @@ -2171,7 +2258,7 @@ void Stepper::report_positions() { const uint8_t old_dir = _READ_DIR(AXIS); \ _ENABLE(AXIS); \ _APPLY_DIR(AXIS, _INVERT_DIR(AXIS)^DIR^INVERT); \ - DELAY_NS(400); /* DRV8825 */ \ + DELAY_NS(MINIMUM_STEPPER_DIR_DELAY); \ _SAVE_START; \ _APPLY_STEP(AXIS)(!_INVERT_STEP_PIN(AXIS), true); \ _PULSE_WAIT; \ @@ -2243,7 +2330,9 @@ void Stepper::report_positions() { Y_DIR_WRITE(INVERT_Y_DIR ^ z_direction); Z_DIR_WRITE(INVERT_Z_DIR ^ z_direction); - DELAY_NS(400); // DRV8825 + #if MINIMUM_STEPPER_DIR_DELAY > 0 + DELAY_NS(MINIMUM_STEPPER_DIR_DELAY); + #endif _SAVE_START; diff --git a/Marlin/stepper.h b/Marlin/stepper.h index 2ac9c7756a..786a376e9e 100644 --- a/Marlin/stepper.h +++ b/Marlin/stepper.h @@ -270,8 +270,8 @@ class Stepper { #endif // Delta error variables for the Bresenham line tracer - static int32_t delta_error[XYZE]; - static uint32_t advance_dividend[XYZE], + static int32_t delta_error[NUM_AXIS]; + static uint32_t advance_dividend[NUM_AXIS], advance_divisor, step_events_completed, // The number of step events executed in the current block accelerate_until, // The point from where we need to stop acceleration @@ -425,11 +425,21 @@ class Stepper { #endif // Set the current position in steps - inline static void set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e) { + inline static void set_position(const int32_t &a, const int32_t &b, const int32_t &c + #if ENABLED(HANGPRINTER) + , const int32_t &d + #endif + , const int32_t &e + ) { planner.synchronize(); const bool was_enabled = STEPPER_ISR_ENABLED(); if (was_enabled) DISABLE_STEPPER_DRIVER_INTERRUPT(); - _set_position(a, b, c, e); + _set_position(a, b, c + #if ENABLED(HANGPRINTER) + , d + #endif + , e + ); if (was_enabled) ENABLE_STEPPER_DRIVER_INTERRUPT(); } @@ -447,11 +457,19 @@ class Stepper { private: // Set the current position in steps - static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c, const int32_t &e); + static void _set_position(const int32_t &a, const int32_t &b, const int32_t &c + #if ENABLED(HANGPRINTER) + , const int32_t &d + #endif + , const int32_t &e + ); // Set direction bits for all steppers static void set_directions(); + // Allow reset_stepper_drivers to access private set_directions + friend void reset_stepper_drivers(); + FORCE_INLINE static uint32_t calc_timer_interval(uint32_t step_rate, uint8_t scale, uint8_t* loops) { uint32_t timer; diff --git a/Marlin/stepper_indirection.cpp b/Marlin/stepper_indirection.cpp index 32ef99a710..cde4c31a23 100644 --- a/Marlin/stepper_indirection.cpp +++ b/Marlin/stepper_indirection.cpp @@ -35,46 +35,48 @@ #include "MarlinConfig.h" +#include "stepper.h" + // // TMC26X Driver objects and inits // -#if ENABLED(HAVE_TMC26X) +#if HAS_DRIVER(TMC26X) #include #include #define _TMC26X_DEFINE(ST) TMC26XStepper stepper##ST(200, ST##_CS_PIN, ST##_STEP_PIN, ST##_DIR_PIN, ST##_MAX_CURRENT, ST##_SENSE_RESISTOR) - #if ENABLED(X_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X, TMC26X) _TMC26X_DEFINE(X); #endif - #if ENABLED(X2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X2, TMC26X) _TMC26X_DEFINE(X2); #endif - #if ENABLED(Y_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y, TMC26X) _TMC26X_DEFINE(Y); #endif - #if ENABLED(Y2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y2, TMC26X) _TMC26X_DEFINE(Y2); #endif - #if ENABLED(Z_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z, TMC26X) _TMC26X_DEFINE(Z); #endif - #if ENABLED(Z2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z2, TMC26X) _TMC26X_DEFINE(Z2); #endif - #if ENABLED(E0_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E0, TMC26X) _TMC26X_DEFINE(E0); #endif - #if ENABLED(E1_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E1, TMC26X) _TMC26X_DEFINE(E1); #endif - #if ENABLED(E2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E2, TMC26X) _TMC26X_DEFINE(E2); #endif - #if ENABLED(E3_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E3, TMC26X) _TMC26X_DEFINE(E3); #endif - #if ENABLED(E4_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E4, TMC26X) _TMC26X_DEFINE(E4); #endif @@ -84,46 +86,46 @@ }while(0) void tmc26x_init_to_defaults() { - #if ENABLED(X_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X, TMC26X) _TMC26X_INIT(X); #endif - #if ENABLED(X2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X2, TMC26X) _TMC26X_INIT(X2); #endif - #if ENABLED(Y_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y, TMC26X) _TMC26X_INIT(Y); #endif - #if ENABLED(Y2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y2, TMC26X) _TMC26X_INIT(Y2); #endif - #if ENABLED(Z_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z, TMC26X) _TMC26X_INIT(Z); #endif - #if ENABLED(Z2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z2, TMC26X) _TMC26X_INIT(Z2); #endif - #if ENABLED(E0_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E0, TMC26X) _TMC26X_INIT(E0); #endif - #if ENABLED(E1_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E1, TMC26X) _TMC26X_INIT(E1); #endif - #if ENABLED(E2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E2, TMC26X) _TMC26X_INIT(E2); #endif - #if ENABLED(E3_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E3, TMC26X) _TMC26X_INIT(E3); #endif - #if ENABLED(E4_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E4, TMC26X) _TMC26X_INIT(E4); #endif } -#endif // HAVE_TMC26X +#endif // TMC26X // // TMC2130 Driver objects and inits // -#if ENABLED(HAVE_TMC2130) +#if HAS_DRIVER(TMC2130) #include #include @@ -141,37 +143,37 @@ #endif // Stepper objects of TMC2130 steppers used - #if ENABLED(X_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X, TMC2130) _TMC2130_DEFINE(X); #endif - #if ENABLED(X2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X2, TMC2130) _TMC2130_DEFINE(X2); #endif - #if ENABLED(Y_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y, TMC2130) _TMC2130_DEFINE(Y); #endif - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y2, TMC2130) _TMC2130_DEFINE(Y2); #endif - #if ENABLED(Z_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z, TMC2130) _TMC2130_DEFINE(Z); #endif - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z2, TMC2130) _TMC2130_DEFINE(Z2); #endif - #if ENABLED(E0_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E0, TMC2130) _TMC2130_DEFINE(E0); #endif - #if ENABLED(E1_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E1, TMC2130) _TMC2130_DEFINE(E1); #endif - #if ENABLED(E2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E2, TMC2130) _TMC2130_DEFINE(E2); #endif - #if ENABLED(E3_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E3, TMC2130) _TMC2130_DEFINE(E3); #endif - #if ENABLED(E4_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E4, TMC2130) _TMC2130_DEFINE(E4); #endif @@ -208,75 +210,74 @@ #define _TMC2130_INIT(ST, SPMM) tmc2130_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) void tmc2130_init_to_defaults() { - #if ENABLED(X_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X, TMC2130) _TMC2130_INIT( X, planner.axis_steps_per_mm[X_AXIS]); #endif - #if ENABLED(X2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X2, TMC2130) _TMC2130_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); #endif - #if ENABLED(Y_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y, TMC2130) _TMC2130_INIT( Y, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y2, TMC2130) _TMC2130_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if ENABLED(Z_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z, TMC2130) _TMC2130_INIT( Z, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z2, TMC2130) _TMC2130_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if ENABLED(E0_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E0, TMC2130) _TMC2130_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); #endif - #if ENABLED(E1_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E1, TMC2130) { constexpr int extruder = 1; _TMC2130_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E2, TMC2130) { constexpr int extruder = 2; _TMC2130_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E3_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E3, TMC2130) { constexpr int extruder = 3; _TMC2130_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E4_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E4, TMC2130) { constexpr int extruder = 4; _TMC2130_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } #endif #if ENABLED(SENSORLESS_HOMING) #define TMC_INIT_SGT(P,Q) stepper##Q.sgt(P##_HOMING_SENSITIVITY); #if X_SENSORLESS - #if ENABLED(X_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_DRIVER_TYPE(X, TMC2130) stepperX.sgt(X_HOMING_SENSITIVITY); #endif - #if ENABLED(X2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X2, TMC2130) stepperX2.sgt(X_HOMING_SENSITIVITY); #endif #endif #if Y_SENSORLESS - #if ENABLED(Y_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_DRIVER_TYPE(Y, TMC2130) stepperY.sgt(Y_HOMING_SENSITIVITY); #endif - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y2, TMC2130) stepperY2.sgt(Y_HOMING_SENSITIVITY); #endif #endif #if Z_SENSORLESS - #if ENABLED(Z_IS_TMC2130) || ENABLED(IS_TRAMS) + #if AXIS_DRIVER_TYPE(Z, TMC2130) stepperZ.sgt(Z_HOMING_SENSITIVITY); #endif - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z2, TMC2130) stepperZ2.sgt(Z_HOMING_SENSITIVITY); #endif #endif #endif } - -#endif // HAVE_TMC2130 +#endif // TMC2130 // // TMC2208 Driver objects and inits // -#if ENABLED(HAVE_TMC2208) +#if HAS_DRIVER(TMC2208) #undef HardwareSerial_h // undo Marlin trickery #include @@ -289,81 +290,80 @@ #endif #define _TMC2208_DEFINE_HARDWARE(ST) TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL) - #define _TMC2208_DEFINE_SOFTWARE(ST) SoftwareSerial ST##_HARDWARE_SERIAL = SoftwareSerial(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN); \ - TMC2208Stepper stepper##ST(&ST##_HARDWARE_SERIAL, ST##_SERIAL_RX_PIN > -1) + #define _TMC2208_DEFINE_SOFTWARE(ST) TMC2208Stepper stepper##ST(ST##_SERIAL_RX_PIN, ST##_SERIAL_TX_PIN, ST##_SERIAL_RX_PIN > -1) // Stepper objects of TMC2208 steppers used - #if ENABLED(X_IS_TMC2208) + #if AXIS_DRIVER_TYPE(X, TMC2208) #ifdef X_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(X); #else _TMC2208_DEFINE_SOFTWARE(X); #endif #endif - #if ENABLED(X2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(X2, TMC2208) #ifdef X2_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(X2); #else _TMC2208_DEFINE_SOFTWARE(X2); #endif #endif - #if ENABLED(Y_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Y, TMC2208) #ifdef Y_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(Y); #else _TMC2208_DEFINE_SOFTWARE(Y); #endif #endif - #if ENABLED(Y2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Y2, TMC2208) #ifdef Y2_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(Y2); #else _TMC2208_DEFINE_SOFTWARE(Y2); #endif #endif - #if ENABLED(Z_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Z, TMC2208) #ifdef Z_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(Z); #else _TMC2208_DEFINE_SOFTWARE(Z); #endif #endif - #if ENABLED(Z2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Z2, TMC2208) #ifdef Z2_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(Z2); #else _TMC2208_DEFINE_SOFTWARE(Z2); #endif #endif - #if ENABLED(E0_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E0, TMC2208) #ifdef E0_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(E0); #else _TMC2208_DEFINE_SOFTWARE(E0); #endif #endif - #if ENABLED(E1_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E1, TMC2208) #ifdef E1_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(E1); #else _TMC2208_DEFINE_SOFTWARE(E1); #endif #endif - #if ENABLED(E2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E2, TMC2208) #ifdef E2_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(E2); #else _TMC2208_DEFINE_SOFTWARE(E2); #endif #endif - #if ENABLED(E3_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E3, TMC2208) #ifdef E3_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(E3); #else _TMC2208_DEFINE_SOFTWARE(E3); #endif #endif - #if ENABLED(E4_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E4, TMC2208) #ifdef E4_HARDWARE_SERIAL _TMC2208_DEFINE_HARDWARE(E4); #else @@ -372,38 +372,82 @@ #endif void tmc2208_serial_begin() { - #if ENABLED(X_IS_TMC2208) - X_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(X, TMC2208) + #ifdef X_HARDWARE_SERIAL + X_HARDWARE_SERIAL.begin(115200); + #else + stepperX.beginSerial(115200); + #endif #endif - #if ENABLED(X2_IS_TMC2208) - X2_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(X2, TMC2208) + #ifdef X2_HARDWARE_SERIAL + X2_HARDWARE_SERIAL.begin(115200); + #else + stepperX2.beginSerial(115200); + #endif #endif - #if ENABLED(Y_IS_TMC2208) - Y_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(Y, TMC2208) + #ifdef Y_HARDWARE_SERIAL + Y_HARDWARE_SERIAL.begin(115200); + #else + stepperY.beginSerial(115200); + #endif #endif - #if ENABLED(Y2_IS_TMC2208) - Y2_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(Y2, TMC2208) + #ifdef Y2_HARDWARE_SERIAL + Y2_HARDWARE_SERIAL.begin(115200); + #else + stepperY2.beginSerial(115200); + #endif #endif - #if ENABLED(Z_IS_TMC2208) - Z_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(Z, TMC2208) + #ifdef Z_HARDWARE_SERIAL + Z_HARDWARE_SERIAL.begin(115200); + #else + stepperZ.beginSerial(115200); + #endif #endif - #if ENABLED(Z2_IS_TMC2208) - Z2_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(Z2, TMC2208) + #ifdef Z2_HARDWARE_SERIAL + Z2_HARDWARE_SERIAL.begin(115200); + #else + stepperZ2.beginSerial(115200); + #endif #endif - #if ENABLED(E0_IS_TMC2208) - E0_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(E0, TMC2208) + #ifdef E0_HARDWARE_SERIAL + E0_HARDWARE_SERIAL.begin(115200); + #else + stepperE0.beginSerial(115200); + #endif #endif - #if ENABLED(E1_IS_TMC2208) - E1_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(E1, TMC2208) + #ifdef E1_HARDWARE_SERIAL + E1_HARDWARE_SERIAL.begin(115200); + #else + stepperE1.beginSerial(115200); + #endif #endif - #if ENABLED(E2_IS_TMC2208) - E2_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(E2, TMC2208) + #ifdef E2_HARDWARE_SERIAL + E2_HARDWARE_SERIAL.begin(115200); + #else + stepperE2.beginSerial(115200); + #endif #endif - #if ENABLED(E3_IS_TMC2208) - E3_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(E3, TMC2208) + #ifdef E3_HARDWARE_SERIAL + E3_HARDWARE_SERIAL.begin(115200); + #else + stepperE3.beginSerial(115200); + #endif #endif - #if ENABLED(E4_IS_TMC2208) - E4_HARDWARE_SERIAL.begin(115200); + #if AXIS_DRIVER_TYPE(E4, TMC2208) + #ifdef E4_HARDWARE_SERIAL + E4_HARDWARE_SERIAL.begin(115200); + #else + stepperE4.beginSerial(115200); + #endif #endif } @@ -446,101 +490,103 @@ #define _TMC2208_INIT(ST, SPMM) tmc2208_init(stepper##ST, ST##_CURRENT, ST##_MICROSTEPS, ST##_HYBRID_THRESHOLD, SPMM) void tmc2208_init_to_defaults() { - #if ENABLED(X_IS_TMC2208) + #if AXIS_DRIVER_TYPE(X, TMC2208) _TMC2208_INIT(X, planner.axis_steps_per_mm[X_AXIS]); #endif - #if ENABLED(X2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(X2, TMC2208) _TMC2208_INIT(X2, planner.axis_steps_per_mm[X_AXIS]); #endif - #if ENABLED(Y_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Y, TMC2208) _TMC2208_INIT(Y, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if ENABLED(Y2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Y2, TMC2208) _TMC2208_INIT(Y2, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if ENABLED(Z_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Z, TMC2208) _TMC2208_INIT(Z, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if ENABLED(Z2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(Z2, TMC2208) _TMC2208_INIT(Z2, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if ENABLED(E0_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E0, TMC2208) _TMC2208_INIT(E0, planner.axis_steps_per_mm[E_AXIS]); #endif - #if ENABLED(E1_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E1, TMC2208) { constexpr int extruder = 1; _TMC2208_INIT(E1, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E2_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E2, TMC2208) { constexpr int extruder = 2; _TMC2208_INIT(E2, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E3_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E3, TMC2208) { constexpr int extruder = 3; _TMC2208_INIT(E3, planner.axis_steps_per_mm[E_AXIS_N]); } #endif - #if ENABLED(E4_IS_TMC2208) + #if AXIS_DRIVER_TYPE(E4, TMC2208) { constexpr int extruder = 4; _TMC2208_INIT(E4, planner.axis_steps_per_mm[E_AXIS_N]); } #endif } - -#endif // HAVE_TMC2208 +#endif // TMC2208 void restore_stepper_drivers() { - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) stepperX.push(); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) stepperX2.push(); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) stepperY.push(); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) stepperY2.push(); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) stepperZ.push(); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) stepperZ2.push(); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) stepperE0.push(); #endif - #if E1_IS_TRINAMIC + #if AXIS_IS_TMC(E1) stepperE1.push(); #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) stepperE2.push(); #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) stepperE3.push(); #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) stepperE4.push(); #endif } void reset_stepper_drivers() { - #if ENABLED(HAVE_TMC26X) + #if HAS_DRIVER(TMC26X) tmc26x_init_to_defaults(); #endif - #if ENABLED(HAVE_TMC2130) + #if HAS_DRIVER(TMC2130) + delay(100); tmc2130_init_to_defaults(); #endif - #if ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2208) + delay(100); tmc2208_init_to_defaults(); #endif #ifdef TMC_ADV TMC_ADV() #endif - #if ENABLED(HAVE_L6470DRIVER) + #if HAS_DRIVER(L6470) L6470_init_to_defaults(); #endif + stepper.set_directions(); } // // L6470 Driver objects and inits // -#if ENABLED(HAVE_L6470DRIVER) +#if HAS_DRIVER(L6470) #include #include @@ -548,37 +594,37 @@ void reset_stepper_drivers() { #define _L6470_DEFINE(ST) L6470 stepper##ST(ST##_ENABLE_PIN) // L6470 Stepper objects - #if ENABLED(X_IS_L6470) + #if AXIS_DRIVER_TYPE(X, L6470) _L6470_DEFINE(X); #endif - #if ENABLED(X2_IS_L6470) + #if AXIS_DRIVER_TYPE(X2, L6470) _L6470_DEFINE(X2); #endif - #if ENABLED(Y_IS_L6470) + #if AXIS_DRIVER_TYPE(Y, L6470) _L6470_DEFINE(Y); #endif - #if ENABLED(Y2_IS_L6470) + #if AXIS_DRIVER_TYPE(Y2, L6470) _L6470_DEFINE(Y2); #endif - #if ENABLED(Z_IS_L6470) + #if AXIS_DRIVER_TYPE(Z, L6470) _L6470_DEFINE(Z); #endif - #if ENABLED(Z2_IS_L6470) + #if AXIS_DRIVER_TYPE(Z2, L6470) _L6470_DEFINE(Z2); #endif - #if ENABLED(E0_IS_L6470) + #if AXIS_DRIVER_TYPE(E0, L6470) _L6470_DEFINE(E0); #endif - #if ENABLED(E1_IS_L6470) + #if AXIS_DRIVER_TYPE(E1, L6470) _L6470_DEFINE(E1); #endif - #if ENABLED(E2_IS_L6470) + #if AXIS_DRIVER_TYPE(E2, L6470) _L6470_DEFINE(E2); #endif - #if ENABLED(E3_IS_L6470) + #if AXIS_DRIVER_TYPE(E3, L6470) _L6470_DEFINE(E3); #endif - #if ENABLED(E4_IS_L6470) + #if AXIS_DRIVER_TYPE(E4, L6470) _L6470_DEFINE(E4); #endif @@ -591,39 +637,39 @@ void reset_stepper_drivers() { }while(0) void L6470_init_to_defaults() { - #if ENABLED(X_IS_L6470) + #if AXIS_DRIVER_TYPE(X, L6470) _L6470_INIT(X); #endif - #if ENABLED(X2_IS_L6470) + #if AXIS_DRIVER_TYPE(X2, L6470) _L6470_INIT(X2); #endif - #if ENABLED(Y_IS_L6470) + #if AXIS_DRIVER_TYPE(Y, L6470) _L6470_INIT(Y); #endif - #if ENABLED(Y2_IS_L6470) + #if AXIS_DRIVER_TYPE(Y2, L6470) _L6470_INIT(Y2); #endif - #if ENABLED(Z_IS_L6470) + #if AXIS_DRIVER_TYPE(Z, L6470) _L6470_INIT(Z); #endif - #if ENABLED(Z2_IS_L6470) + #if AXIS_DRIVER_TYPE(Z2, L6470) _L6470_INIT(Z2); #endif - #if ENABLED(E0_IS_L6470) + #if AXIS_DRIVER_TYPE(E0, L6470) _L6470_INIT(E0); #endif - #if ENABLED(E1_IS_L6470) + #if AXIS_DRIVER_TYPE(E1, L6470) _L6470_INIT(E1); #endif - #if ENABLED(E2_IS_L6470) + #if AXIS_DRIVER_TYPE(E2, L6470) _L6470_INIT(E2); #endif - #if ENABLED(E3_IS_L6470) + #if AXIS_DRIVER_TYPE(E3, L6470) _L6470_INIT(E3); #endif - #if ENABLED(E4_IS_L6470) + #if AXIS_DRIVER_TYPE(E4, L6470) _L6470_INIT(E4); #endif } -#endif // HAVE_L6470DRIVER +#endif // L6470 diff --git a/Marlin/stepper_indirection.h b/Marlin/stepper_indirection.h index 3e67118d86..54a17c51e1 100644 --- a/Marlin/stepper_indirection.h +++ b/Marlin/stepper_indirection.h @@ -47,25 +47,25 @@ #include "MarlinConfig.h" // TMC26X drivers have STEP/DIR on normal pins, but ENABLE via SPI -#if ENABLED(HAVE_TMC26X) +#if HAS_DRIVER(TMC26X) #include #include void tmc26x_init_to_defaults(); #endif -#if ENABLED(HAVE_TMC2130) +#if HAS_DRIVER(TMC2130) #include void tmc2130_init_to_defaults(); #endif -#if ENABLED(HAVE_TMC2208) +#if HAS_DRIVER(TMC2208) #include void tmc2208_serial_begin(); void tmc2208_init_to_defaults(); #endif // L6470 has STEP on normal pins, but DIR/ENABLE via SPI -#if ENABLED(HAVE_L6470DRIVER) +#if HAS_DRIVER(L6470) #include #include void L6470_init_to_defaults(); @@ -75,7 +75,7 @@ void restore_stepper_drivers(); // Called by PSU_ON void reset_stepper_drivers(); // Called by settings.load / settings.reset // X Stepper -#if ENABLED(X_IS_L6470) +#if AXIS_DRIVER_TYPE(X, L6470) extern L6470 stepperX; #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) do{ if (STATE) stepperX.Step_Clock(stepperX.getStatus() & STATUS_HIZ); else stepperX.softFree(); }while(0) @@ -84,15 +84,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define X_DIR_WRITE(STATE) stepperX.Step_Clock(STATE) #define X_DIR_READ (stepperX.getStatus() & STATUS_DIR) #else - #if ENABLED(X_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X, TMC26X) extern TMC26XStepper stepperX; #define X_ENABLE_INIT NOOP #define X_ENABLE_WRITE(STATE) stepperX.setEnabled(STATE) #define X_ENABLE_READ stepperX.isEnabled() #else - #if ENABLED(X_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X, TMC2130) extern TMC2130Stepper stepperX; - #elif ENABLED(X_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(X, TMC2208) extern TMC2208Stepper stepperX; #endif #define X_ENABLE_INIT SET_OUTPUT(X_ENABLE_PIN) @@ -108,7 +108,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define X_STEP_READ READ(X_STEP_PIN) // Y Stepper -#if ENABLED(Y_IS_L6470) +#if AXIS_DRIVER_TYPE(Y, L6470) extern L6470 stepperY; #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) do{ if (STATE) stepperY.Step_Clock(stepperY.getStatus() & STATUS_HIZ); else stepperY.softFree(); }while(0) @@ -117,15 +117,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define Y_DIR_WRITE(STATE) stepperY.Step_Clock(STATE) #define Y_DIR_READ (stepperY.getStatus() & STATUS_DIR) #else - #if ENABLED(Y_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y, TMC26X) extern TMC26XStepper stepperY; #define Y_ENABLE_INIT NOOP #define Y_ENABLE_WRITE(STATE) stepperY.setEnabled(STATE) #define Y_ENABLE_READ stepperY.isEnabled() #else - #if ENABLED(Y_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y, TMC2130) extern TMC2130Stepper stepperY; - #elif ENABLED(Y_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(Y, TMC2208) extern TMC2208Stepper stepperY; #endif #define Y_ENABLE_INIT SET_OUTPUT(Y_ENABLE_PIN) @@ -141,7 +141,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define Y_STEP_READ READ(Y_STEP_PIN) // Z Stepper -#if ENABLED(Z_IS_L6470) +#if AXIS_DRIVER_TYPE(Z, L6470) extern L6470 stepperZ; #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ.Step_Clock(stepperZ.getStatus() & STATUS_HIZ); else stepperZ.softFree(); }while(0) @@ -150,15 +150,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define Z_DIR_WRITE(STATE) stepperZ.Step_Clock(STATE) #define Z_DIR_READ (stepperZ.getStatus() & STATUS_DIR) #else - #if ENABLED(Z_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z, TMC26X) extern TMC26XStepper stepperZ; #define Z_ENABLE_INIT NOOP #define Z_ENABLE_WRITE(STATE) stepperZ.setEnabled(STATE) #define Z_ENABLE_READ stepperZ.isEnabled() #else - #if ENABLED(Z_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z, TMC2130) extern TMC2130Stepper stepperZ; - #elif ENABLED(Z_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(Z, TMC2208) extern TMC2208Stepper stepperZ; #endif #define Z_ENABLE_INIT SET_OUTPUT(Z_ENABLE_PIN) @@ -175,7 +175,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset // X2 Stepper #if HAS_X2_ENABLE - #if ENABLED(X2_IS_L6470) + #if AXIS_DRIVER_TYPE(X2, L6470) extern L6470 stepperX2; #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) do{ if (STATE) stepperX2.Step_Clock(stepperX2.getStatus() & STATUS_HIZ); else stepperX2.softFree(); }while(0) @@ -184,15 +184,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define X2_DIR_WRITE(STATE) stepperX2.Step_Clock(STATE) #define X2_DIR_READ (stepperX2.getStatus() & STATUS_DIR) #else - #if ENABLED(X2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(X2, TMC26X) extern TMC26XStepper stepperX2; #define X2_ENABLE_INIT NOOP #define X2_ENABLE_WRITE(STATE) stepperX2.setEnabled(STATE) #define X2_ENABLE_READ stepperX2.isEnabled() #else - #if ENABLED(X2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X2, TMC2130) extern TMC2130Stepper stepperX2; - #elif ENABLED(X2_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(X2, TMC2208) extern TMC2208Stepper stepperX2; #endif #define X2_ENABLE_INIT SET_OUTPUT(X2_ENABLE_PIN) @@ -210,7 +210,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset // Y2 Stepper #if HAS_Y2_ENABLE - #if ENABLED(Y2_IS_L6470) + #if AXIS_DRIVER_TYPE(Y2, L6470) extern L6470 stepperY2; #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) do{ if (STATE) stepperY2.Step_Clock(stepperY2.getStatus() & STATUS_HIZ); else stepperY2.softFree(); }while(0) @@ -219,15 +219,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define Y2_DIR_WRITE(STATE) stepperY2.Step_Clock(STATE) #define Y2_DIR_READ (stepperY2.getStatus() & STATUS_DIR) #else - #if ENABLED(Y2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Y2, TMC26X) extern TMC26XStepper stepperY2; #define Y2_ENABLE_INIT NOOP #define Y2_ENABLE_WRITE(STATE) stepperY2.setEnabled(STATE) #define Y2_ENABLE_READ stepperY2.isEnabled() #else - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y2, TMC2130) extern TMC2130Stepper stepperY2; - #elif ENABLED(Y2_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(Y2, TMC2208) extern TMC2208Stepper stepperY2; #endif #define Y2_ENABLE_INIT SET_OUTPUT(Y2_ENABLE_PIN) @@ -245,7 +245,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset // Z2 Stepper #if HAS_Z2_ENABLE - #if ENABLED(Z2_IS_L6470) + #if AXIS_DRIVER_TYPE(Z2, L6470) extern L6470 stepperZ2; #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) do{ if (STATE) stepperZ2.Step_Clock(stepperZ2.getStatus() & STATUS_HIZ); else stepperZ2.softFree(); }while(0) @@ -254,15 +254,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define Z2_DIR_WRITE(STATE) stepperZ2.Step_Clock(STATE) #define Z2_DIR_READ (stepperZ2.getStatus() & STATUS_DIR) #else - #if ENABLED(Z2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(Z2, TMC26X) extern TMC26XStepper stepperZ2; #define Z2_ENABLE_INIT NOOP #define Z2_ENABLE_WRITE(STATE) stepperZ2.setEnabled(STATE) #define Z2_ENABLE_READ stepperZ2.isEnabled() #else - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z2, TMC2130) extern TMC2130Stepper stepperZ2; - #elif ENABLED(Z2_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(Z2, TMC2208) extern TMC2208Stepper stepperZ2; #endif #define Z2_ENABLE_INIT SET_OUTPUT(Z2_ENABLE_PIN) @@ -279,7 +279,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #endif // E0 Stepper -#if ENABLED(E0_IS_L6470) +#if AXIS_DRIVER_TYPE(E0, L6470) extern L6470 stepperE0; #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) do{ if (STATE) stepperE0.Step_Clock(stepperE0.getStatus() & STATUS_HIZ); else stepperE0.softFree(); }while(0) @@ -288,15 +288,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E0_DIR_WRITE(STATE) stepperE0.Step_Clock(STATE) #define E0_DIR_READ (stepperE0.getStatus() & STATUS_DIR) #else - #if ENABLED(E0_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E0, TMC26X) extern TMC26XStepper stepperE0; #define E0_ENABLE_INIT NOOP #define E0_ENABLE_WRITE(STATE) stepperE0.setEnabled(STATE) #define E0_ENABLE_READ stepperE0.isEnabled() #else - #if ENABLED(E0_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E0, TMC2130) extern TMC2130Stepper stepperE0; - #elif ENABLED(E0_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(E0, TMC2208) extern TMC2208Stepper stepperE0; #endif #define E0_ENABLE_INIT SET_OUTPUT(E0_ENABLE_PIN) @@ -312,7 +312,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E0_STEP_READ READ(E0_STEP_PIN) // E1 Stepper -#if ENABLED(E1_IS_L6470) +#if AXIS_DRIVER_TYPE(E1, L6470) extern L6470 stepperE1; #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) do{ if (STATE) stepperE1.Step_Clock(stepperE1.getStatus() & STATUS_HIZ); else stepperE1.softFree(); }while(0) @@ -321,15 +321,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E1_DIR_WRITE(STATE) stepperE1.Step_Clock(STATE) #define E1_DIR_READ (stepperE1.getStatus() & STATUS_DIR) #else - #if ENABLED(E1_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E1, TMC26X) extern TMC26XStepper stepperE1; #define E1_ENABLE_INIT NOOP #define E1_ENABLE_WRITE(STATE) stepperE1.setEnabled(STATE) #define E1_ENABLE_READ stepperE1.isEnabled() #else - #if ENABLED(E1_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E1, TMC2130) extern TMC2130Stepper stepperE1; - #elif ENABLED(E1_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(E1, TMC2208) extern TMC2208Stepper stepperE1; #endif #define E1_ENABLE_INIT SET_OUTPUT(E1_ENABLE_PIN) @@ -345,7 +345,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E1_STEP_READ READ(E1_STEP_PIN) // E2 Stepper -#if ENABLED(E2_IS_L6470) +#if AXIS_DRIVER_TYPE(E2, L6470) extern L6470 stepperE2; #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) do{ if (STATE) stepperE2.Step_Clock(stepperE2.getStatus() & STATUS_HIZ); else stepperE2.softFree(); }while(0) @@ -354,15 +354,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E2_DIR_WRITE(STATE) stepperE2.Step_Clock(STATE) #define E2_DIR_READ (stepperE2.getStatus() & STATUS_DIR) #else - #if ENABLED(E2_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E2, TMC26X) extern TMC26XStepper stepperE2; #define E2_ENABLE_INIT NOOP #define E2_ENABLE_WRITE(STATE) stepperE2.setEnabled(STATE) #define E2_ENABLE_READ stepperE2.isEnabled() #else - #if ENABLED(E2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E2, TMC2130) extern TMC2130Stepper stepperE2; - #elif ENABLED(E2_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(E2, TMC2208) extern TMC2208Stepper stepperE2; #endif #define E2_ENABLE_INIT SET_OUTPUT(E2_ENABLE_PIN) @@ -378,7 +378,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E2_STEP_READ READ(E2_STEP_PIN) // E3 Stepper -#if ENABLED(E3_IS_L6470) +#if AXIS_DRIVER_TYPE(E3, L6470) extern L6470 stepperE3; #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) do{ if (STATE) stepperE3.Step_Clock(stepperE3.getStatus() & STATUS_HIZ); else stepperE3.softFree(); }while(0) @@ -387,15 +387,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E3_DIR_WRITE(STATE) stepperE3.Step_Clock(STATE) #define E3_DIR_READ (stepperE3.getStatus() & STATUS_DIR) #else - #if ENABLED(E3_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E3, TMC26X) extern TMC26XStepper stepperE3; #define E3_ENABLE_INIT NOOP #define E3_ENABLE_WRITE(STATE) stepperE3.setEnabled(STATE) #define E3_ENABLE_READ stepperE3.isEnabled() #else - #if ENABLED(E3_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E3, TMC2130) extern TMC2130Stepper stepperE3; - #elif ENABLED(E3_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(E3, TMC2208) extern TMC2208Stepper stepperE3; #endif #define E3_ENABLE_INIT SET_OUTPUT(E3_ENABLE_PIN) @@ -411,7 +411,7 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E3_STEP_READ READ(E3_STEP_PIN) // E4 Stepper -#if ENABLED(E4_IS_L6470) +#if AXIS_DRIVER_TYPE(E4, L6470) extern L6470 stepperE4; #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) do{ if (STATE) stepperE4.Step_Clock(stepperE4.getStatus() & STATUS_HIZ); else stepperE4.softFree(); }while(0) @@ -420,15 +420,15 @@ void reset_stepper_drivers(); // Called by settings.load / settings.reset #define E4_DIR_WRITE(STATE) stepperE4.Step_Clock(STATE) #define E4_DIR_READ (stepperE4.getStatus() & STATUS_DIR) #else - #if ENABLED(E4_IS_TMC26X) + #if AXIS_DRIVER_TYPE(E4, TMC26X) extern TMC26XStepper stepperE4; #define E4_ENABLE_INIT NOOP #define E4_ENABLE_WRITE(STATE) stepperE4.setEnabled(STATE) #define E4_ENABLE_READ stepperE4.isEnabled() #else - #if ENABLED(E4_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E4, TMC2130) extern TMC2130Stepper stepperE4; - #elif ENABLED(E4_IS_TMC2208) + #elif AXIS_DRIVER_TYPE(E4, TMC2208) extern TMC2208Stepper stepperE4; #endif #define E4_ENABLE_INIT SET_OUTPUT(E4_ENABLE_PIN) diff --git a/Marlin/temperature.cpp b/Marlin/temperature.cpp index e287a47794..665e5b5ec9 100644 --- a/Marlin/temperature.cpp +++ b/Marlin/temperature.cpp @@ -260,19 +260,29 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; workKp = 0, workKi = 0, workKd = 0, max = 0, min = 10000; - #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED)) - #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP) - #define TV(B,H) (hotend < 0 ? (B) : (H)) - #elif HAS_TP_BED - #define TV(B,H) (B) + #if HAS_PID_FOR_BOTH + #define GHV(B,H) (hotend < 0 ? (B) : (H)) + #define SHV(S,B,H) if (hotend < 0) S##_bed = B; else S [hotend] = H; + #elif ENABLED(PIDTEMPBED) + #define GHV(B,H) B + #define SHV(S,B,H) (S##_bed = B) #else - #define TV(B,H) (H) + #define GHV(B,H) H + #define SHV(S,B,H) (S [hotend] = H) #endif #if WATCH_THE_BED || WATCH_HOTENDS - const uint16_t watch_temp_period = TV(WATCH_BED_TEMP_PERIOD, WATCH_TEMP_PERIOD); - const uint8_t watch_temp_increase = TV(WATCH_BED_TEMP_INCREASE, WATCH_TEMP_INCREASE); - const float watch_temp_target = target - float(watch_temp_increase + TV(TEMP_BED_HYSTERESIS, TEMP_HYSTERESIS) + 1); + #define HAS_TP_BED (ENABLED(THERMAL_PROTECTION_BED) && ENABLED(PIDTEMPBED)) + #if HAS_TP_BED && ENABLED(THERMAL_PROTECTION_HOTENDS) && ENABLED(PIDTEMP) + #define GTV(B,H) (hotend < 0 ? (B) : (H)) + #elif HAS_TP_BED + #define GTV(B,H) (B) + #else + #define GTV(B,H) (H) + #endif + const uint16_t watch_temp_period = GTV(WATCH_BED_TEMP_PERIOD, WATCH_TEMP_PERIOD); + const uint8_t watch_temp_increase = GTV(WATCH_BED_TEMP_INCREASE, WATCH_TEMP_INCREASE); + const float watch_temp_target = target - float(watch_temp_increase + GTV(TEMP_BED_HYSTERESIS, TEMP_HYSTERESIS) + 1); millis_t temp_change_ms = next_temp_ms + watch_temp_period * 1000UL; float next_watch_temp = 0.0; bool heated = false; @@ -302,16 +312,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; disable_all_heaters(); // switch off all heaters. - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1; - else - soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = bias = d = (PID_MAX) >> 1; - #else - soft_pwm_amount_bed = bias = d = (MAX_BED_POWER) >> 1; - #endif + SHV(soft_pwm_amount, bias = d = (MAX_BED_POWER) >> 1, bias = d = (PID_MAX) >> 1); wait_for_heatup = true; // Can be interrupted with M108 @@ -324,15 +325,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; updateTemperaturesFromRawValues(); // Get the current temperature and constrain it - current = - #if HAS_PID_FOR_BOTH - hotend < 0 ? current_temperature_bed : current_temperature[hotend] - #elif ENABLED(PIDTEMP) - current_temperature[hotend] - #else - current_temperature_bed - #endif - ; + current = GHV(current_temperature_bed, current_temperature[hotend]); NOLESS(max, current); NOMORE(min, current); @@ -346,16 +339,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; if (heating && current > target) { if (ELAPSED(ms, t2 + 5000UL)) { heating = false; - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = (bias - d) >> 1; - else - soft_pwm_amount[hotend] = (bias - d) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = (bias - d) >> 1; - #elif ENABLED(PIDTEMPBED) - soft_pwm_amount_bed = (bias - d) >> 1; - #endif + SHV(soft_pwm_amount, (bias - d) >> 1, (bias - d) >> 1); t1 = ms; t_high = t1 - t2; max = target; @@ -368,15 +352,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; t2 = ms; t_low = t2 - t1; if (cycles > 0) { - long max_pow = - #if HAS_PID_FOR_BOTH - hotend < 0 ? MAX_BED_POWER : PID_MAX - #elif ENABLED(PIDTEMP) - PID_MAX - #else - MAX_BED_POWER - #endif - ; + const long max_pow = GHV(MAX_BED_POWER, PID_MAX); bias += (d * (t_high - t_low)) / (t_low + t_high); bias = constrain(bias, 20, max_pow - 20); d = (bias > max_pow >> 1) ? max_pow - 1 - bias : bias; @@ -415,16 +391,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; */ } } - #if HAS_PID_FOR_BOTH - if (hotend < 0) - soft_pwm_amount_bed = (bias + d) >> 1; - else - soft_pwm_amount[hotend] = (bias + d) >> 1; - #elif ENABLED(PIDTEMP) - soft_pwm_amount[hotend] = (bias + d) >> 1; - #else - soft_pwm_amount_bed = (bias + d) >> 1; - #endif + SHV(soft_pwm_amount, (bias + d) >> 1, (bias + d) >> 1); cycles++; min = target; } @@ -453,10 +420,10 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; if ( #if WATCH_THE_BED && WATCH_HOTENDS true - #elif WATCH_THE_BED - hotend < 0 - #else + #elif WATCH_HOTENDS hotend >= 0 + #else + hotend < 0 #endif ) { if (!heated) { // If not yet reached target... @@ -487,7 +454,7 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS]; SERIAL_PROTOCOLLNPGM(MSG_PID_AUTOTUNE_FINISHED); #if HAS_PID_FOR_BOTH - const char* estring = hotend < 0 ? "bed" : ""; + const char* estring = GHV("bed", ""); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kp ", workKp); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Ki ", workKi); SERIAL_EOL(); SERIAL_PROTOCOLPAIR("#define DEFAULT_", estring); SERIAL_PROTOCOLPAIR("Kd ", workKd); SERIAL_EOL(); @@ -575,7 +542,13 @@ int Temperature::getHeaterPower(const int heater) { uint8_t fanDone = 0; for (uint8_t f = 0; f < COUNT(fanPin); f++) { - pin_t pin = pgm_read_byte(&fanPin[f]); + const pin_t pin = + #ifdef ARDUINO + pgm_read_byte(&fanPin[f]) + #else + fanPin[f] + #endif + ; const uint8_t bit = pgm_read_byte(&fanBit[f]); if (pin >= 0 && !TEST(fanDone, bit)) { uint8_t newFanSpeed = TEST(fanState, bit) ? EXTRUDER_AUTO_FAN_SPEED : 0; @@ -596,7 +569,6 @@ int Temperature::getHeaterPower(const int heater) { // Temperature Error Handlers // void Temperature::_temp_error(const int8_t e, const char * const serial_msg, const char * const lcd_msg) { - static bool killed = false; if (IsRunning()) { SERIAL_ERROR_START(); serialprintPGM(serial_msg); @@ -604,6 +576,7 @@ void Temperature::_temp_error(const int8_t e, const char * const serial_msg, con if (e >= 0) SERIAL_ERRORLN((int)e); else SERIAL_ERRORLNPGM(MSG_HEATER_BED); } #if DISABLED(BOGUS_TEMPERATURE_FAILSAFE_OVERRIDE) + static bool killed = false; if (!killed) { Running = false; killed = true; @@ -1770,8 +1743,89 @@ void Temperature::set_current_temp_raw() { } #endif // PINS_DEBUGGING +#if ENABLED(FILAMENT_WIDTH_SENSOR) + uint32_t raw_filwidth_value; // = 0 +#endif + +void Temperature::readings_ready() { + // Update the raw values if they've been read. Else we could be updating them during reading. + if (!temp_meas_ready) set_current_temp_raw(); + + // Filament Sensor - can be read any time since IIR filtering is used + #if ENABLED(FILAMENT_WIDTH_SENSOR) + current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach + #endif + + ZERO(raw_temp_value); + + #if HAS_HEATED_BED + raw_temp_bed_value = 0; + #endif + + #if HAS_TEMP_CHAMBER + raw_temp_chamber_value = 0; + #endif + + #define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1) + + int constexpr temp_dir[] = { + #if ENABLED(HEATER_0_USES_MAX6675) + 0 + #else + TEMPDIR(0) + #endif + #if HOTENDS > 1 + , TEMPDIR(1) + #if HOTENDS > 2 + , TEMPDIR(2) + #if HOTENDS > 3 + , TEMPDIR(3) + #if HOTENDS > 4 + , TEMPDIR(4) + #endif // HOTENDS > 4 + #endif // HOTENDS > 3 + #endif // HOTENDS > 2 + #endif // HOTENDS > 1 + }; + + for (uint8_t e = 0; e < COUNT(temp_dir); e++) { + const int16_t tdir = temp_dir[e], rawtemp = current_temperature_raw[e] * tdir; + const bool heater_on = (target_temperature[e] > 0) + #if ENABLED(PIDTEMP) + || (soft_pwm_amount[e] > 0) + #endif + ; + if (rawtemp > maxttemp_raw[e] * tdir) max_temp_error(e); + if (rawtemp < minttemp_raw[e] * tdir && !is_preheating(e) && heater_on) { + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) + #endif + min_temp_error(e); + } + #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED + else + consecutive_low_temperature_error[e] = 0; + #endif + } + + #if HAS_HEATED_BED + #if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP + #define GEBED <= + #else + #define GEBED >= + #endif + const bool bed_on = (target_temperature_bed > 0) + #if ENABLED(PIDTEMPBED) + || (soft_pwm_amount_bed > 0) + #endif + ; + if (current_temperature_bed_raw GEBED bed_maxttemp_raw) max_temp_error(-1); + if (bed_minttemp_raw GEBED current_temperature_bed_raw && bed_on) min_temp_error(-1); + #endif +} + /** - * Timer 0 is shared with millies so don't change the prescaler. + * Timer 0 is shared with millis so don't change the prescaler. * * This ISR uses the compare method so it runs at the base * frequency (16 MHz / 64 / 256 = 976.5625 Hz), but at the TCNT0 set @@ -1833,10 +1887,6 @@ void Temperature::isr() { ISR_STATICS(BED); #endif - #if ENABLED(FILAMENT_WIDTH_SENSOR) - static unsigned long raw_filwidth_value = 0; - #endif - #if DISABLED(SLOW_PWM_HEATERS) constexpr uint8_t pwm_mask = #if ENABLED(SOFT_PWM_DITHER) @@ -2087,6 +2137,12 @@ void Temperature::isr() { * * This gives each ADC 0.9765ms to charge up. */ + #define ACCUMULATE_ADC(var) do{ \ + if (!HAL_ADC_READY()) next_sensor_state = adc_sensor_state; \ + else var += HAL_READ_ADC(); \ + }while(0) + + ADCSensorState next_sensor_state = adc_sensor_state < SensorsReady ? (ADCSensorState)(int(adc_sensor_state) + 1) : StartSampling; switch (adc_sensor_state) { @@ -2096,21 +2152,30 @@ void Temperature::isr() { constexpr int8_t extra_loops = MIN_ADC_ISR_LOOPS - (int8_t)SensorsReady; static uint8_t delay_count = 0; if (extra_loops > 0) { - if (delay_count == 0) delay_count = extra_loops; // Init this delay - if (--delay_count) // While delaying... - adc_sensor_state = (ADCSensorState)(int(SensorsReady) - 1); // retain this state (else, next state will be 0) + if (delay_count == 0) delay_count = extra_loops; // Init this delay + if (--delay_count) // While delaying... + next_sensor_state = SensorsReady; // retain this state (else, next state will be 0) break; } - else - adc_sensor_state = (ADCSensorState)0; // Fall-through to start first sensor now + else { + adc_sensor_state = StartSampling; // Fall-through to start sampling + next_sensor_state = (ADCSensorState)(int(StartSampling) + 1); + } } + case StartSampling: // Start of sampling loops. Do updates/checks. + if (++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms. + temp_count = 0; + readings_ready(); + } + break; + #if HAS_TEMP_ADC_0 case PrepareTemp_0: HAL_START_ADC(TEMP_0_PIN); break; case MeasureTemp_0: - raw_temp_value[0] += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_value[0]); break; #endif @@ -2119,7 +2184,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_BED_PIN); break; case MeasureTemp_BED: - raw_temp_bed_value += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_bed_value); break; #endif @@ -2128,7 +2193,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_CHAMBER_PIN); break; case MeasureTemp_CHAMBER: - raw_temp_chamber_value += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_chamber_value); break; #endif @@ -2137,7 +2202,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_1_PIN); break; case MeasureTemp_1: - raw_temp_value[1] += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_value[1]); break; #endif @@ -2146,7 +2211,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_2_PIN); break; case MeasureTemp_2: - raw_temp_value[2] += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_value[2]); break; #endif @@ -2155,7 +2220,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_3_PIN); break; case MeasureTemp_3: - raw_temp_value[3] += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_value[3]); break; #endif @@ -2164,7 +2229,7 @@ void Temperature::isr() { HAL_START_ADC(TEMP_4_PIN); break; case MeasureTemp_4: - raw_temp_value[4] += HAL_READ_ADC; + ACCUMULATE_ADC(raw_temp_value[4]); break; #endif @@ -2173,9 +2238,11 @@ void Temperature::isr() { HAL_START_ADC(FILWIDTH_PIN); break; case Measure_FILWIDTH: - if (HAL_READ_ADC > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read. - raw_filwidth_value -= (raw_filwidth_value >> 7); // Subtract 1/128th of the raw_filwidth_value - raw_filwidth_value += ((unsigned long)HAL_READ_ADC << 7); // Add new ADC reading, scaled by 128 + if (!HAL_ADC_READY()) + next_sensor_state = adc_sensor_state; // redo this state + else if (HAL_READ_ADC() > 102) { // Make sure ADC is reading > 0.5 volts, otherwise don't read. + raw_filwidth_value -= raw_filwidth_value >> 7; // Subtract 1/128th of the raw_filwidth_value + raw_filwidth_value += uint32_t(HAL_READ_ADC()) << 7; // Add new ADC reading, scaled by 128 } break; #endif @@ -2185,8 +2252,10 @@ void Temperature::isr() { HAL_START_ADC(ADC_KEYPAD_PIN); break; case Measure_ADC_KEY: - if (ADCKey_count < 16) { - raw_ADCKey_value = HAL_READ_ADC; + if (!HAL_ADC_READY()) + next_sensor_state = adc_sensor_state; // redo this state + else if (ADCKey_count < 16) { + raw_ADCKey_value = HAL_READ_ADC(); if (raw_ADCKey_value > 900) { //ADC Key release ADCKey_count = 0; @@ -2204,94 +2273,12 @@ void Temperature::isr() { } // switch(adc_sensor_state) - if (!adc_sensor_state && ++temp_count >= OVERSAMPLENR) { // 10 * 16 * 1/(16000000/64/256) = 164ms. + // Go to the next state + adc_sensor_state = next_sensor_state; - temp_count = 0; - - // Update the raw values if they've been read. Else we could be updating them during reading. - if (!temp_meas_ready) set_current_temp_raw(); - - // Filament Sensor - can be read any time since IIR filtering is used - #if ENABLED(FILAMENT_WIDTH_SENSOR) - current_raw_filwidth = raw_filwidth_value >> 10; // Divide to get to 0-16384 range since we used 1/128 IIR filter approach - #endif - - ZERO(raw_temp_value); - - #if HAS_HEATED_BED - raw_temp_bed_value = 0; - #endif - - #if HAS_TEMP_CHAMBER - raw_temp_chamber_value = 0; - #endif - - #define TEMPDIR(N) ((HEATER_##N##_RAW_LO_TEMP) > (HEATER_##N##_RAW_HI_TEMP) ? -1 : 1) - - int constexpr temp_dir[] = { - #if ENABLED(HEATER_0_USES_MAX6675) - 0 - #else - TEMPDIR(0) - #endif - #if HOTENDS > 1 - , TEMPDIR(1) - #if HOTENDS > 2 - , TEMPDIR(2) - #if HOTENDS > 3 - , TEMPDIR(3) - #if HOTENDS > 4 - , TEMPDIR(4) - #endif // HOTENDS > 4 - #endif // HOTENDS > 3 - #endif // HOTENDS > 2 - #endif // HOTENDS > 1 - }; - - for (uint8_t e = 0; e < COUNT(temp_dir); e++) { - const int16_t tdir = temp_dir[e], rawtemp = current_temperature_raw[e] * tdir; - const bool heater_on = 0 < - #if ENABLED(PIDTEMP) - soft_pwm_amount[e] - #else - target_temperature[e] - #endif - ; - if (rawtemp > maxttemp_raw[e] * tdir && heater_on) max_temp_error(e); - if (rawtemp < minttemp_raw[e] * tdir && !is_preheating(e) && heater_on) { - #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED - if (++consecutive_low_temperature_error[e] >= MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED) - #endif - min_temp_error(e); - } - #ifdef MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED - else - consecutive_low_temperature_error[e] = 0; - #endif - } - - #if HAS_HEATED_BED - #if HEATER_BED_RAW_LO_TEMP > HEATER_BED_RAW_HI_TEMP - #define GEBED <= - #else - #define GEBED >= - #endif - const bool bed_on = 0 < - #if ENABLED(PIDTEMPBED) - soft_pwm_amount_bed - #else - target_temperature_bed - #endif - ; - if (current_temperature_bed_raw GEBED bed_maxttemp_raw && bed_on) max_temp_error(-1); - if (bed_minttemp_raw GEBED current_temperature_bed_raw && bed_on) min_temp_error(-1); - #endif - - } // temp_count >= OVERSAMPLENR - - // Go to the next state, up to SensorsReady - adc_sensor_state = (ADCSensorState)(int(adc_sensor_state) + 1); - if (adc_sensor_state > SensorsReady) adc_sensor_state = (ADCSensorState)0; + // + // Additional ~1KHz Tasks + // #if ENABLED(BABYSTEPPING) LOOP_XYZ(axis) { diff --git a/Marlin/temperature.h b/Marlin/temperature.h index 1112e1799e..cc6df0bdf7 100644 --- a/Marlin/temperature.h +++ b/Marlin/temperature.h @@ -59,6 +59,7 @@ * States for ADC reading in the ISR */ enum ADCSensorState : char { + StartSampling, #if HAS_TEMP_ADC_0 PrepareTemp_0, MeasureTemp_0, @@ -329,6 +330,7 @@ class Temperature { /** * Called from the Temperature ISR */ + static void readings_ready(); static void isr(); /** diff --git a/Marlin/thermistortable_501.h b/Marlin/thermistortable_501.h index 512ac0d8d8..ac40d119b3 100644 --- a/Marlin/thermistortable_501.h +++ b/Marlin/thermistortable_501.h @@ -28,8 +28,8 @@ const short temptable_501[][2] PROGMEM = { {OV( 19), 280}, {OV( 23), 270}, {OV( 27), 260}, - {OV( 32), 250}, - {OV( 30), 240}, + {OV( 31), 250}, + {OV( 37), 240}, {OV( 47), 230}, {OV( 57), 220}, {OV( 68), 210}, diff --git a/Marlin/thermistortable_71.h b/Marlin/thermistortable_71.h index c7b8a64e30..f28a4ceabb 100644 --- a/Marlin/thermistortable_71.h +++ b/Marlin/thermistortable_71.h @@ -28,78 +28,26 @@ // R2 = 4700 Ohm const short temptable_71[][2] PROGMEM = { { OV( 35), 300 }, - { OV( 51), 270 }, - { OV( 54), 265 }, - { OV( 58), 260 }, + { OV( 51), 269 }, { OV( 59), 258 }, - { OV( 61), 256 }, - { OV( 63), 254 }, { OV( 64), 252 }, - { OV( 66), 250 }, - { OV( 67), 249 }, - { OV( 68), 248 }, - { OV( 69), 247 }, - { OV( 70), 246 }, - { OV( 71), 245 }, - { OV( 72), 244 }, - { OV( 73), 243 }, - { OV( 74), 242 }, - { OV( 75), 241 }, - { OV( 76), 240 }, - { OV( 77), 239 }, - { OV( 78), 238 }, - { OV( 79), 237 }, - { OV( 80), 236 }, + { OV( 71), 244 }, { OV( 81), 235 }, - { OV( 82), 234 }, - { OV( 84), 233 }, - { OV( 85), 232 }, - { OV( 86), 231 }, { OV( 87), 230 }, - { OV( 89), 229 }, - { OV( 90), 228 }, - { OV( 91), 227 }, { OV( 92), 226 }, - { OV( 94), 225 }, - { OV( 95), 224 }, - { OV( 97), 223 }, - { OV( 98), 222 }, - { OV( 99), 221 }, - { OV( 101), 220 }, { OV( 102), 219 }, - { OV( 104), 218 }, - { OV( 106), 217 }, - { OV( 107), 216 }, - { OV( 109), 215 }, { OV( 110), 214 }, - { OV( 112), 213 }, - { OV( 114), 212 }, { OV( 115), 211 }, - { OV( 117), 210 }, - { OV( 119), 209 }, - { OV( 121), 208 }, - { OV( 123), 207 }, - { OV( 125), 206 }, { OV( 126), 205 }, { OV( 128), 204 }, { OV( 130), 203 }, { OV( 132), 202 }, { OV( 134), 201 }, { OV( 136), 200 }, - { OV( 139), 199 }, - { OV( 141), 198 }, - { OV( 143), 197 }, - { OV( 145), 196 }, { OV( 147), 195 }, - { OV( 150), 194 }, - { OV( 152), 193 }, { OV( 154), 192 }, - { OV( 157), 191 }, { OV( 159), 190 }, - { OV( 162), 189 }, { OV( 164), 188 }, - { OV( 167), 187 }, - { OV( 170), 186 }, { OV( 172), 185 }, { OV( 175), 184 }, { OV( 178), 183 }, @@ -113,9 +61,7 @@ const short temptable_71[][2] PROGMEM = { { OV( 202), 175 }, { OV( 205), 174 }, { OV( 208), 173 }, - { OV( 212), 172 }, { OV( 215), 171 }, - { OV( 219), 170 }, { OV( 237), 165 }, { OV( 256), 160 }, { OV( 300), 150 }, @@ -123,46 +69,22 @@ const short temptable_71[][2] PROGMEM = { { OV( 470), 120 }, { OV( 504), 115 }, { OV( 538), 110 }, - { OV( 552), 108 }, - { OV( 566), 106 }, - { OV( 580), 104 }, - { OV( 594), 102 }, - { OV( 608), 100 }, - { OV( 622), 98 }, - { OV( 636), 96 }, - { OV( 650), 94 }, - { OV( 664), 92 }, - { OV( 678), 90 }, - { OV( 712), 85 }, { OV( 745), 80 }, - { OV( 758), 78 }, { OV( 770), 76 }, - { OV( 783), 74 }, - { OV( 795), 72 }, { OV( 806), 70 }, - { OV( 818), 68 }, { OV( 829), 66 }, - { OV( 840), 64 }, - { OV( 850), 62 }, { OV( 860), 60 }, - { OV( 870), 58 }, { OV( 879), 56 }, { OV( 888), 54 }, - { OV( 897), 52 }, { OV( 905), 50 }, { OV( 924), 45 }, { OV( 940), 40 }, { OV( 955), 35 }, - { OV( 967), 30 }, - { OV( 970), 29 }, { OV( 972), 28 }, { OV( 974), 27 }, { OV( 976), 26 }, { OV( 978), 25 }, { OV( 980), 24 }, - { OV( 982), 23 }, - { OV( 984), 22 }, - { OV( 985), 21 }, { OV( 987), 20 }, { OV( 995), 15 }, { OV(1001), 10 }, diff --git a/Marlin/thermistortables.h b/Marlin/thermistortables.h index 462337778d..a65d3eb501 100644 --- a/Marlin/thermistortables.h +++ b/Marlin/thermistortables.h @@ -204,8 +204,8 @@ #endif // The SCAN_THERMISTOR_TABLE macro needs alteration? -static_assert(HEATER_0_TEMPTABLE_LEN < 128 && HEATER_1_TEMPTABLE_LEN < 128 && HEATER_2_TEMPTABLE_LEN < 128 && HEATER_3_TEMPTABLE_LEN < 128 && HEATER_4_TEMPTABLE_LEN < 128 && BEDTEMPTABLE_LEN < 128 && CHAMBERTEMPTABLE_LEN < 128, - "Temperature conversion tables over 127 entries need special consideration." +static_assert(HEATER_0_TEMPTABLE_LEN < 256 && HEATER_1_TEMPTABLE_LEN < 256 && HEATER_2_TEMPTABLE_LEN < 256 && HEATER_3_TEMPTABLE_LEN < 256 && HEATER_4_TEMPTABLE_LEN < 256 && BEDTEMPTABLE_LEN < 256 && CHAMBERTEMPTABLE_LEN < 256, + "Temperature conversion tables over 255 entries need special consideration." ); // Set the high and low raw values for the heaters diff --git a/Marlin/tmc_util.cpp b/Marlin/tmc_util.cpp index 662fbc176c..2e9ba5575c 100644 --- a/Marlin/tmc_util.cpp +++ b/Marlin/tmc_util.cpp @@ -50,7 +50,7 @@ bool report_tmc_status = false; bool is_ot; bool is_error; }; - #if ENABLED(HAVE_TMC2130) + #if HAS_DRIVER(TMC2130) static uint32_t get_pwm_scale(TMC2130Stepper &st) { return st.PWM_SCALE(); } static uint8_t get_status_response(TMC2130Stepper &st) { return st.status_response & 0xF; } static TMC_driver_data get_driver_data(TMC2130Stepper &st) { @@ -68,7 +68,7 @@ bool report_tmc_status = false; return data; } #endif - #if ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2208) static uint32_t get_pwm_scale(TMC2208Stepper &st) { return st.pwm_scale_sum(); } static uint8_t get_status_response(TMC2208Stepper &st) { uint32_t drv_status = st.DRV_STATUS(); @@ -157,21 +157,21 @@ bool report_tmc_status = false; } } - #define HAS_HW_COMMS(ST) ENABLED(ST##_IS_TMC2130)|| (ENABLED(ST##_IS_TMC2208) && defined(ST##_HARDWARE_SERIAL)) + #define HAS_HW_COMMS(ST) AXIS_DRIVER_TYPE(ST, TMC2130) || (AXIS_DRIVER_TYPE(ST, TMC2208) && defined(ST##_HARDWARE_SERIAL)) void monitor_tmc_driver() { static millis_t next_cOT = 0; if (ELAPSED(millis(), next_cOT)) { next_cOT = millis() + 500; - #if HAS_HW_COMMS(X) || ENABLED(IS_TRAMS) + #if HAS_HW_COMMS(X) static uint8_t x_otpw_cnt = 0; monitor_tmc_driver(stepperX, TMC_X, x_otpw_cnt); #endif - #if HAS_HW_COMMS(Y) || ENABLED(IS_TRAMS) + #if HAS_HW_COMMS(Y) static uint8_t y_otpw_cnt = 0; monitor_tmc_driver(stepperY, TMC_Y, y_otpw_cnt); #endif - #if HAS_HW_COMMS(Z) || ENABLED(IS_TRAMS) + #if HAS_HW_COMMS(Z) static uint8_t z_otpw_cnt = 0; monitor_tmc_driver(stepperZ, TMC_Z, z_otpw_cnt); #endif @@ -187,7 +187,7 @@ bool report_tmc_status = false; static uint8_t z2_otpw_cnt = 0; monitor_tmc_driver(stepperZ2, TMC_Z, z2_otpw_cnt); #endif - #if HAS_HW_COMMS(E0) || ENABLED(IS_TRAMS) + #if HAS_HW_COMMS(E0) static uint8_t e0_otpw_cnt = 0; monitor_tmc_driver(stepperE0, TMC_E0, e0_otpw_cnt); #endif @@ -309,7 +309,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { SERIAL_EOL(); } - #if ENABLED(HAVE_TMC2130) + #if HAS_DRIVER(TMC2130) static void tmc_status(TMC2130Stepper &st, const TMC_debug_enum i) { switch (i) { case TMC_PWM_SCALE: SERIAL_PRINT(st.PWM_SCALE(), DEC); break; @@ -329,7 +329,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { } #endif - #if ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2208) static void tmc_status(TMC2208Stepper &st, const TMC_debug_enum i) { switch (i) { case TMC_TSTEP: { uint32_t data = 0; st.TSTEP(&data); SERIAL_PROTOCOL(data); break; } @@ -418,52 +418,52 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { } static void tmc_debug_loop(const TMC_debug_enum i) { - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) tmc_status(stepperX, TMC_X, i, planner.axis_steps_per_mm[X_AXIS]); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) tmc_status(stepperX2, TMC_X2, i, planner.axis_steps_per_mm[X_AXIS]); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) tmc_status(stepperY, TMC_Y, i, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) tmc_status(stepperY2, TMC_Y2, i, planner.axis_steps_per_mm[Y_AXIS]); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) tmc_status(stepperZ, TMC_Z, i, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) tmc_status(stepperZ2, TMC_Z2, i, planner.axis_steps_per_mm[Z_AXIS]); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) tmc_status(stepperE0, TMC_E0, i, planner.axis_steps_per_mm[E_AXIS]); #endif - #if E1_IS_TRINAMIC + #if AXIS_IS_TMC(E1) tmc_status(stepperE1, TMC_E1, i, planner.axis_steps_per_mm[E_AXIS #if ENABLED(DISTINCT_E_FACTORS) + 1 #endif ]); #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) tmc_status(stepperE2, TMC_E2, i, planner.axis_steps_per_mm[E_AXIS #if ENABLED(DISTINCT_E_FACTORS) + 2 #endif ]); #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) tmc_status(stepperE3, TMC_E3, i, planner.axis_steps_per_mm[E_AXIS #if ENABLED(DISTINCT_E_FACTORS) + 3 #endif ]); #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) tmc_status(stepperE4, TMC_E4, i, planner.axis_steps_per_mm[E_AXIS #if ENABLED(DISTINCT_E_FACTORS) + 4 @@ -475,40 +475,40 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { } static void drv_status_loop(const TMC_drv_status_enum i) { - #if X_IS_TRINAMIC + #if AXIS_IS_TMC(X) tmc_parse_drv_status(stepperX, TMC_X, i); #endif - #if X2_IS_TRINAMIC + #if AXIS_IS_TMC(X2) tmc_parse_drv_status(stepperX2, TMC_X2, i); #endif - #if Y_IS_TRINAMIC + #if AXIS_IS_TMC(Y) tmc_parse_drv_status(stepperY, TMC_Y, i); #endif - #if Y2_IS_TRINAMIC + #if AXIS_IS_TMC(Y2) tmc_parse_drv_status(stepperY2, TMC_Y2, i); #endif - #if Z_IS_TRINAMIC + #if AXIS_IS_TMC(Z) tmc_parse_drv_status(stepperZ, TMC_Z, i); #endif - #if Z2_IS_TRINAMIC + #if AXIS_IS_TMC(Z2) tmc_parse_drv_status(stepperZ2, TMC_Z2, i); #endif - #if E0_IS_TRINAMIC + #if AXIS_IS_TMC(E0) tmc_parse_drv_status(stepperE0, TMC_E0, i); #endif - #if E1_IS_TRINAMIC + #if AXIS_IS_TMC(E1) tmc_parse_drv_status(stepperE1, TMC_E1, i); #endif - #if E2_IS_TRINAMIC + #if AXIS_IS_TMC(E2) tmc_parse_drv_status(stepperE2, TMC_E2, i); #endif - #if E3_IS_TRINAMIC + #if AXIS_IS_TMC(E3) tmc_parse_drv_status(stepperE3, TMC_E3, i); #endif - #if E4_IS_TRINAMIC + #if AXIS_IS_TMC(E4) tmc_parse_drv_status(stepperE4, TMC_E4, i); #endif @@ -551,7 +551,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { TMC_REPORT("Stallguard thrs", TMC_SGT); DRV_REPORT("DRVSTATUS", TMC_DRV_CODES); - #if ENABLED(HAVE_TMC2130) + #if HAS_DRIVER(TMC2130) DRV_REPORT("stallguard\t", TMC_STALLGUARD); DRV_REPORT("sg_result\t", TMC_SG_RESULT); DRV_REPORT("fsactive\t", TMC_FSACTIVE); @@ -563,7 +563,7 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { DRV_REPORT("s2ga\t", TMC_S2GA); DRV_REPORT("otpw\t", TMC_DRV_OTPW); DRV_REPORT("ot\t", TMC_OT); - #if ENABLED(HAVE_TMC2208) + #if HAS_DRIVER(TMC2208) DRV_REPORT("157C\t", TMC_T157); DRV_REPORT("150C\t", TMC_T150); DRV_REPORT("143C\t", TMC_T143); @@ -589,43 +589,43 @@ void _tmc_say_sgt(const TMC_AxisEnum axis, const int8_t sgt) { #endif // SENSORLESS_HOMING -#if ENABLED(HAVE_TMC2130) +#if HAS_DRIVER(TMC2130) #define SET_CS_PIN(st) OUT_WRITE(st##_CS_PIN, HIGH) void tmc_init_cs_pins() { - #if ENABLED(X_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X, TMC2130) SET_CS_PIN(X); #endif - #if ENABLED(Y_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y, TMC2130) SET_CS_PIN(Y); #endif - #if ENABLED(Z_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z, TMC2130) SET_CS_PIN(Z); #endif - #if ENABLED(X2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(X2, TMC2130) SET_CS_PIN(X2); #endif - #if ENABLED(Y2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Y2, TMC2130) SET_CS_PIN(Y2); #endif - #if ENABLED(Z2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(Z2, TMC2130) SET_CS_PIN(Z2); #endif - #if ENABLED(E0_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E0, TMC2130) SET_CS_PIN(E0); #endif - #if ENABLED(E1_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E1, TMC2130) SET_CS_PIN(E1); #endif - #if ENABLED(E2_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E2, TMC2130) SET_CS_PIN(E2); #endif - #if ENABLED(E3_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E3, TMC2130) SET_CS_PIN(E3); #endif - #if ENABLED(E4_IS_TMC2130) + #if AXIS_DRIVER_TYPE(E4, TMC2130) SET_CS_PIN(E4); #endif } -#endif // HAVE_TMC2130 +#endif // TMC2130 #endif // HAS_TRINAMIC diff --git a/Marlin/tmc_util.h b/Marlin/tmc_util.h index 08d461e424..7efe67a502 100644 --- a/Marlin/tmc_util.h +++ b/Marlin/tmc_util.h @@ -25,11 +25,11 @@ #include "MarlinConfig.h" -#if ENABLED(HAVE_TMC2130) +#if HAS_DRIVER(TMC2130) #include #endif -#if ENABLED(HAVE_TMC2208) +#if HAS_DRIVER(TMC2208) #include #endif @@ -100,7 +100,7 @@ void monitor_tmc_driver(); void tmc_sensorless_homing(TMC2130Stepper &st, const bool enable=true); #endif -#if ENABLED(HAVE_TMC2130) +#if HAS_DRIVER(TMC2130) void tmc_init_cs_pins(); #endif diff --git a/Marlin/twibus.cpp b/Marlin/twibus.cpp index 777d151e4f..5156c89797 100644 --- a/Marlin/twibus.cpp +++ b/Marlin/twibus.cpp @@ -55,7 +55,7 @@ void TWIBus::address(const uint8_t adr) { #endif } -void TWIBus::addbyte(const char c) { +void TWIBus::addbyte(const byte c) { if (this->buffer_s >= COUNT(this->buffer)) return; this->buffer[this->buffer_s++] = c; #if ENABLED(DEBUG_TWIBUS) @@ -63,7 +63,7 @@ void TWIBus::addbyte(const char c) { #endif } -void TWIBus::addbytes(char src[], uint8_t bytes) { +void TWIBus::addbytes(byte src[], uint8_t bytes) { #if ENABLED(DEBUG_TWIBUS) debug(PSTR("addbytes"), bytes); #endif @@ -138,7 +138,7 @@ void TWIBus::relay(const uint8_t bytes) { echodata(bytes, PSTR("i2c-reply"), this->addr); } -uint8_t TWIBus::capture(char *dst, const uint8_t bytes) { +uint8_t TWIBus::capture(byte *dst, const uint8_t bytes) { this->reset(); uint8_t count = 0; while (count < bytes && Wire.available()) diff --git a/Marlin/twibus.h b/Marlin/twibus.h index 03763972a7..8759c40dba 100644 --- a/Marlin/twibus.h +++ b/Marlin/twibus.h @@ -33,6 +33,13 @@ typedef void (*twiReceiveFunc_t)(int bytes); typedef void (*twiRequestFunc_t)(); +#if ENABLED(MECHADUINO_I2C_COMMANDS) + typedef union { + float fval; + byte bval[sizeof(float)]; + } i2cFloat; +#endif + #define TWIBUS_BUFFER_SIZE 32 /** @@ -99,7 +106,7 @@ class TWIBus { * * @param c a data byte */ - void addbyte(const char c); + void addbyte(const byte c); /** * @brief Add some bytes to the buffer @@ -109,7 +116,7 @@ class TWIBus { * @param src source data address * @param bytes the number of bytes to add */ - void addbytes(char src[], uint8_t bytes); + void addbytes(byte src[], uint8_t bytes); /** * @brief Add a null-terminated string to the buffer @@ -172,7 +179,7 @@ class TWIBus { * @param bytes the number of bytes to request * @return the number of bytes captured to the buffer */ - uint8_t capture(char *dst, const uint8_t bytes); + uint8_t capture(byte *dst, const uint8_t bytes); /** * @brief Flush the i2c bus. diff --git a/Marlin/ubl.cpp b/Marlin/ubl.cpp index df9c212bbf..26485c5d02 100644 --- a/Marlin/ubl.cpp +++ b/Marlin/ubl.cpp @@ -76,7 +76,7 @@ // ignore the status of the g26_debug_flag if (*title != '!' && !g26_debug_flag) return; - const float de = destination[E_AXIS] - current_position[E_AXIS]; + const float de = destination[E_CART] - current_position[E_CART]; if (de == 0.0) return; // Printing moves only @@ -97,7 +97,7 @@ SERIAL_ECHOPGM(", "); SERIAL_ECHO_F(current_position[Z_AXIS], 6); SERIAL_ECHOPGM(", "); - SERIAL_ECHO_F(current_position[E_AXIS], 6); + SERIAL_ECHO_F(current_position[E_CART], 6); SERIAL_ECHOPGM(" ) destination=( "); debug_echo_axis(X_AXIS); SERIAL_ECHOPGM(", "); diff --git a/Marlin/ubl.h b/Marlin/ubl.h index 873e5e6ec4..03380af452 100644 --- a/Marlin/ubl.h +++ b/Marlin/ubl.h @@ -54,7 +54,6 @@ enum MeshPointType : char { INVALID, REAL, SET_IN_BITMAP }; // External references char *ftostr43sign(const float&, char); -void home_all_axes(); extern uint8_t ubl_cnt; diff --git a/Marlin/ubl_G29.cpp b/Marlin/ubl_G29.cpp index 0286a76858..c401fa6962 100644 --- a/Marlin/ubl_G29.cpp +++ b/Marlin/ubl_G29.cpp @@ -296,10 +296,10 @@ // Check for commands that require the printer to be homed if (may_move) { - if (axis_unhomed_error()) home_all_axes(); #if ENABLED(DUAL_X_CARRIAGE) if (active_extruder != 0) tool_change(0); #endif + if (axis_unhomed_error()) home_all_axes(); } // Invalidate Mesh Points. This command is a little bit asymmetrical because @@ -1559,12 +1559,12 @@ incremental_LSF(&lsf_results, PROBE_PT_3_X, PROBE_PT_3_Y, measured_z); } } - + STOW_PROBE(); #ifdef Z_AFTER_PROBING move_z_after_probing(); #endif - + if (abort_flag) { SERIAL_ECHOPGM("?Error probing point. Aborting operation.\n"); return; @@ -1625,7 +1625,7 @@ #ifdef Z_AFTER_PROBING move_z_after_probing(); #endif - + if (abort_flag || finish_incremental_LSF(&lsf_results)) { SERIAL_ECHOPGM("Could not complete LSF!"); return; diff --git a/Marlin/ubl_motion.cpp b/Marlin/ubl_motion.cpp index 5272e20795..0751c95720 100644 --- a/Marlin/ubl_motion.cpp +++ b/Marlin/ubl_motion.cpp @@ -46,8 +46,8 @@ */ #if ENABLED(SKEW_CORRECTION) // For skew correction just adjust the destination point and we're done - float start[XYZE] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_AXIS] }, - end[XYZE] = { destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_AXIS] }; + float start[XYZE] = { current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], current_position[E_CART] }, + end[XYZE] = { destination[X_AXIS], destination[Y_AXIS], destination[Z_AXIS], destination[E_CART] }; planner.skew(start[X_AXIS], start[Y_AXIS], start[Z_AXIS]); planner.skew(end[X_AXIS], end[Y_AXIS], end[Z_AXIS]); #else @@ -64,7 +64,7 @@ SERIAL_ECHOPAIR(" ubl.line_to_destination_cartesian(xe=", destination[X_AXIS]); SERIAL_ECHOPAIR(", ye=", destination[Y_AXIS]); SERIAL_ECHOPAIR(", ze=", destination[Z_AXIS]); - SERIAL_ECHOPAIR(", ee=", destination[E_AXIS]); + SERIAL_ECHOPAIR(", ee=", destination[E_CART]); SERIAL_CHAR(')'); SERIAL_EOL(); debug_current_and_destination(PSTR("Start of ubl.line_to_destination_cartesian()")); @@ -85,7 +85,7 @@ + UBL_Z_RAISE_WHEN_OFF_MESH #endif ; - planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + z_raise, end[E_AXIS], feed_rate, extruder); + planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + z_raise, end[E_CART], feed_rate, extruder); set_current_from_destination(); if (g26_debug_flag) @@ -112,7 +112,7 @@ // Undefined parts of the Mesh in z_values[][] are NAN. // Replace NAN corrections with 0.0 to prevent NAN propagation. - planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + (isnan(z0) ? 0.0 : z0), end[E_AXIS], feed_rate, extruder); + planner.buffer_segment(end[X_AXIS], end[Y_AXIS], end[Z_AXIS] + (isnan(z0) ? 0.0 : z0), end[E_CART], feed_rate, extruder); if (g26_debug_flag) debug_current_and_destination(PSTR("FINAL_MOVE in ubl.line_to_destination_cartesian()")); @@ -149,7 +149,7 @@ const bool use_x_dist = adx > ady; float on_axis_distance = use_x_dist ? dx : dy, - e_position = end[E_AXIS] - start[E_AXIS], + e_position = end[E_CART] - start[E_CART], z_position = end[Z_AXIS] - start[Z_AXIS]; const float e_normalized_dist = e_position / on_axis_distance, @@ -198,11 +198,11 @@ if (ry != start[Y_AXIS]) { if (!inf_normalized_flag) { on_axis_distance = use_x_dist ? rx - start[X_AXIS] : ry - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } else { - e_position = end[E_AXIS]; + e_position = end[E_CART]; z_position = end[Z_AXIS]; } @@ -249,11 +249,11 @@ if (rx != start[X_AXIS]) { if (!inf_normalized_flag) { on_axis_distance = use_x_dist ? rx - start[X_AXIS] : ry - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; // is based on X or Y because this is a horizontal move + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; // is based on X or Y because this is a horizontal move z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } else { - e_position = end[E_AXIS]; + e_position = end[E_CART]; z_position = end[Z_AXIS]; } @@ -308,11 +308,11 @@ if (!inf_normalized_flag) { on_axis_distance = use_x_dist ? rx - start[X_AXIS] : next_mesh_line_y - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } else { - e_position = end[E_AXIS]; + e_position = end[E_CART]; z_position = end[Z_AXIS]; } if (!planner.buffer_segment(rx, next_mesh_line_y, z_position + z0, e_position, feed_rate, extruder)) @@ -331,11 +331,11 @@ if (!inf_normalized_flag) { on_axis_distance = use_x_dist ? next_mesh_line_x - start[X_AXIS] : ry - start[Y_AXIS]; - e_position = start[E_AXIS] + on_axis_distance * e_normalized_dist; + e_position = start[E_CART] + on_axis_distance * e_normalized_dist; z_position = start[Z_AXIS] + on_axis_distance * z_normalized_dist; } else { - e_position = end[E_AXIS]; + e_position = end[E_CART]; z_position = end[Z_AXIS]; } @@ -378,7 +378,12 @@ #if ENABLED(DELTA) // apply delta inverse_kinematics DELTA_IK(raw); - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_AXIS], fr, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_CART], fr, active_extruder); + + #elif ENABLED(HANGPRINTER) // apply hangprinter inverse_kinematics + + HANGPRINTER_IK(raw); + planner.buffer_segment(line_lengths[A_AXIS], line_lengths[B_AXIS], line_lengths[C_AXIS], line_lengths[D_AXIS], in_raw[E_CART], fr, active_extruder); #elif IS_SCARA // apply scara inverse_kinematics (should be changed to save raw->logical->raw) @@ -391,11 +396,11 @@ scara_oldB = delta[B_AXIS]; float s_feedrate = MAX(adiff, bdiff) * scara_feed_factor; - planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_AXIS], s_feedrate, active_extruder); + planner.buffer_segment(delta[A_AXIS], delta[B_AXIS], delta[C_AXIS], in_raw[E_CART], s_feedrate, active_extruder); #else // CARTESIAN - planner.buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], in_raw[E_AXIS], fr, active_extruder); + planner.buffer_segment(raw[X_AXIS], raw[Y_AXIS], raw[Z_AXIS], in_raw[E_CART], fr, active_extruder); #endif } @@ -427,7 +432,7 @@ rtarget[X_AXIS] - current_position[X_AXIS], rtarget[Y_AXIS] - current_position[Y_AXIS], rtarget[Z_AXIS] - current_position[Z_AXIS], - rtarget[E_AXIS] - current_position[E_AXIS] + rtarget[E_CART] - current_position[E_CART] }; const float cartesian_xy_mm = HYPOT(total[X_AXIS], total[Y_AXIS]); // total horizontal xy distance @@ -454,7 +459,7 @@ total[X_AXIS] * inv_segments, total[Y_AXIS] * inv_segments, total[Z_AXIS] * inv_segments, - total[E_AXIS] * inv_segments + total[E_CART] * inv_segments }; // Note that E segment distance could vary slightly as z mesh height @@ -464,7 +469,7 @@ current_position[X_AXIS], current_position[Y_AXIS], current_position[Z_AXIS], - current_position[E_AXIS] + current_position[E_CART] }; // Only compute leveling per segment if ubl active and target below z_fade_height. diff --git a/Marlin/ultralcd.cpp b/Marlin/ultralcd.cpp index 6a20224a84..5f5ceb7cb3 100644 --- a/Marlin/ultralcd.cpp +++ b/Marlin/ultralcd.cpp @@ -265,8 +265,8 @@ uint16_t max_display_update_time = 0; #if ENABLED(SDSUPPORT) void lcd_sdcard_menu(); - void menu_action_sdfile(const char* filename, char* longFilename); - void menu_action_sddirectory(const char* filename, char* longFilename); + void menu_action_sdfile(CardReader& theCard); + void menu_action_sddirectory(CardReader& theCard); #endif //////////////////////////////////////////// @@ -505,7 +505,7 @@ uint16_t max_display_update_time = 0; if (currentScreen == lcd_status_screen) doubleclick_expire_ms = millis() + DOUBLECLICK_MAX_INTERVAL; } - else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms) && (planner.movesplanned() || IS_SD_PRINTING)) + else if (screen == lcd_status_screen && currentScreen == lcd_main_menu && PENDING(millis(), doubleclick_expire_ms) && (planner.movesplanned() || IS_SD_PRINTING())) screen = #if ENABLED(BABYSTEP_ZPROBE_OFFSET) lcd_babystep_zoffset @@ -652,7 +652,7 @@ void lcd_status_screen() { #if ENABLED(LCD_SET_PROGRESS_MANUALLY) && ENABLED(SDSUPPORT) && (ENABLED(LCD_PROGRESS_BAR) || ENABLED(DOGLCD)) // Progress bar % comes from SD when actively printing - if (IS_SD_PRINTING) + if (IS_SD_PRINTING()) progress_bar_percent = card.percentDone(); #endif @@ -756,7 +756,7 @@ void lcd_reset_status() { msg = paused; #if ENABLED(SDSUPPORT) else if (card.sdprinting) - return lcd_setstatus(card.longFilename[0] ? card.longFilename : card.filename, true); + return lcd_setstatus(card.longest_filename(), true); #endif else if (print_job_timer.isRunning()) msg = printing; @@ -854,11 +854,9 @@ void lcd_quick_feedback(const bool clear_buttons) { lcd_reset_status(); } - bool abort_sd_printing; // =false - void lcd_sdcard_stop() { wait_for_heatup = wait_for_user = false; - abort_sd_printing = true; + card.abort_sd_printing = true; lcd_setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1); lcd_return_to_status(); } @@ -874,7 +872,7 @@ void lcd_quick_feedback(const bool clear_buttons) { lcd_return_to_status(); // Turn leveling off and home - enqueue_and_echo_commands_P(PSTR("M420 S0\nG28" + enqueue_and_echo_commands_P(PSTR("M420 S0\nG28 R0" #if ENABLED(MARLIN_DEV_MODE) " S" #elif !IS_KINEMATIC @@ -1109,7 +1107,7 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light); #endif - if (planner.movesplanned() || IS_SD_PRINTING) + if (planner.movesplanned() || IS_SD_PRINTING()) MENU_ITEM(submenu, MSG_TUNE, lcd_tune_menu); else MENU_ITEM(submenu, MSG_PREPARE, lcd_prepare_menu); @@ -1275,7 +1273,7 @@ void lcd_quick_feedback(const bool clear_buttons) { ubl_encoderPosition = (ubl.encoder_diff > 0) ? 1 : -1; ubl.encoder_diff = 0; - mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005f / 2.0f; + mesh_edit_accumulator += float(ubl_encoderPosition) * 0.005f * 0.5f; mesh_edit_value = mesh_edit_accumulator; encoderPosition = 0; lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT; @@ -2675,6 +2673,13 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_ITEM(gcode, MSG_AUTO_HOME_Z, PSTR("G28 Z")); #endif + // + // TMC Z Calibration + // + #if ENABLED(TMC_Z_CALIBRATION) + MENU_ITEM(gcode, MSG_TMC_Z_CALIBRATION, PSTR("G28\nM915")); + #endif + // // Level Bed // @@ -2725,7 +2730,7 @@ void lcd_quick_feedback(const bool clear_buttons) { // Change filament // #if ENABLED(ADVANCED_PAUSE_FEATURE) - if (!IS_SD_FILE_OPEN) { + if (!IS_SD_FILE_OPEN()) { #if E_STEPPERS == 1 && !ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) if (thermalManager.targetHotEnoughToExtrude(active_extruder)) MENU_ITEM(gcode, MSG_FILAMENTCHANGE, PSTR("M600 B0")); @@ -2919,7 +2924,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #if EXTRUDERS > 1 const int8_t old_extruder = active_extruder; - active_extruder = manual_move_e_index; + if (manual_move_axis == E_AXIS) active_extruder = manual_move_e_index; #endif // Set movement on a single axis @@ -2945,7 +2950,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #else - planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]), manual_move_e_index); + planner.buffer_line_kinematic(current_position, MMM_TO_MMS(manual_feedrate_mm_m[manual_move_axis]), manual_move_axis == E_AXIS ? manual_move_e_index : active_extruder); manual_move_axis = (int8_t)NO_AXIS; #endif @@ -3070,7 +3075,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #if IS_KINEMATIC manual_move_offset += diff; #else - current_position[E_AXIS] += diff; + current_position[E_CART] += diff; #endif manual_move_to_current(E_AXIS #if E_MANUAL > 1 @@ -3100,7 +3105,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif // E_MANUAL > 2 } #endif // E_MANUAL > 1 - lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_AXIS] + lcd_implementation_drawedit(pos_label, ftostr41sign(current_position[E_CART] #if IS_KINEMATIC + manual_move_offset #endif @@ -3515,7 +3520,7 @@ void lcd_quick_feedback(const bool clear_buttons) { MENU_ITEM_EDIT(bool, MSG_AUTOTEMP, &planner.autotemp_enabled); MENU_ITEM_EDIT(float3, MSG_MIN, &planner.autotemp_min, 0, float(HEATER_0_MAXTEMP) - 15); MENU_ITEM_EDIT(float3, MSG_MAX, &planner.autotemp_max, 0, float(HEATER_0_MAXTEMP) - 15); - MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0.0, 1.0); + MENU_ITEM_EDIT(float52, MSG_FACTOR, &planner.autotemp_factor, 0, 1); #endif // @@ -4031,9 +4036,9 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif if (card.filenameIsDir) - MENU_ITEM(sddirectory, MSG_CARD_MENU, card.filename, card.longFilename); + MENU_ITEM(sddirectory, MSG_CARD_MENU, card); else - MENU_ITEM(sdfile, MSG_CARD_MENU, card.filename, card.longFilename); + MENU_ITEM(sdfile, MSG_CARD_MENU, card); } else { MENU_ITEM_DUMMY(); @@ -4404,7 +4409,7 @@ void lcd_quick_feedback(const bool clear_buttons) { #endif // E_STEPPERS == 1 #if ENABLED(FILAMENT_LOAD_UNLOAD_GCODES) - if (!planner.movesplanned() && !IS_SD_FILE_OPEN) { + if (!planner.movesplanned() && !IS_SD_FILE_OPEN()) { // Load filament #if E_STEPPERS == 1 PGM_P msg0 = PSTR(MSG_FILAMENTLOAD); @@ -4843,13 +4848,13 @@ void lcd_quick_feedback(const bool clear_buttons) { DEFINE_MENU_EDIT_TYPE(int16_t, int3, itostr3, 1); DEFINE_MENU_EDIT_TYPE(uint8_t, int8, i8tostr3, 1); - DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1.0f); - DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100.0f); - DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000.0f); + DEFINE_MENU_EDIT_TYPE(float, float3, ftostr3, 1); + DEFINE_MENU_EDIT_TYPE(float, float52, ftostr52, 100); + DEFINE_MENU_EDIT_TYPE(float, float43, ftostr43sign, 1000); DEFINE_MENU_EDIT_TYPE(float, float5, ftostr5rj, 0.01f); - DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10.0f); - DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100.0f); - DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100.0f); + DEFINE_MENU_EDIT_TYPE(float, float51, ftostr51sign, 10); + DEFINE_MENU_EDIT_TYPE(float, float52sign, ftostr52sign, 100); + DEFINE_MENU_EDIT_TYPE(float, float62, ftostr62rj, 100); DEFINE_MENU_EDIT_TYPE(uint32_t, long5, ftostr5rj, 0.01f); /** @@ -4954,19 +4959,17 @@ void lcd_quick_feedback(const bool clear_buttons) { #if ENABLED(SDSUPPORT) - void menu_action_sdfile(const char* filename, char* longFilename) { + void menu_action_sdfile(CardReader& theCard) { #if ENABLED(SD_REPRINT_LAST_SELECTED_FILE) last_sdfile_encoderPosition = encoderPosition; // Save which file was selected for later use #endif - UNUSED(longFilename); - card.openAndPrintFile(filename); + card.openAndPrintFile(theCard.filename); lcd_return_to_status(); lcd_reset_status(); } - void menu_action_sddirectory(const char* filename, char* longFilename) { - UNUSED(longFilename); - card.chdir(filename); + void menu_action_sddirectory(CardReader& theCard) { + card.chdir(theCard.filename); encoderTopLine = 0; encoderPosition = 2 * ENCODER_STEPS_PER_MENU_ITEM; screen_changed = true; @@ -5050,7 +5053,7 @@ void lcd_init() { #endif } -int16_t lcd_strlen(const char* s) { +int16_t utf8_strlen(const char* s) { int16_t i = 0, j = 0; while (s[i]) { if (START_OF_UTF8_CHAR(s[i])) j++; @@ -5059,7 +5062,7 @@ int16_t lcd_strlen(const char* s) { return j; } -int16_t lcd_strlen_P(const char* s) { +int16_t utf8_strlen_P(const char* s) { int16_t j = 0; while (pgm_read_byte(s)) { if (START_OF_UTF8_CHAR(pgm_read_byte(s))) j++; @@ -5153,7 +5156,7 @@ void lcd_update() { #if ENABLED(SDSUPPORT) && PIN_EXISTS(SD_DETECT) - const uint8_t sd_status = (uint8_t)IS_SD_INSERTED; + const uint8_t sd_status = (uint8_t)IS_SD_INSERTED(); if (sd_status != lcd_sd_status && lcd_detected()) { uint8_t old_sd_status = lcd_sd_status; // prevent re-entry to this block! diff --git a/Marlin/ultralcd.h b/Marlin/ultralcd.h index e03efceba1..5386fa00ef 100644 --- a/Marlin/ultralcd.h +++ b/Marlin/ultralcd.h @@ -41,8 +41,8 @@ #include "Marlin.h" - int16_t lcd_strlen(const char* s); - int16_t lcd_strlen_P(const char* s); + int16_t utf8_strlen(const char* s); + int16_t utf8_strlen_P(const char* s); bool lcd_hasstatus(); void lcd_setstatus(const char* message, const bool persist=false); void lcd_setstatusPGM(const char* message, const int8_t level=0); @@ -262,10 +262,4 @@ void lcd_reselect_last_file(); #endif -#if ENABLED(ULTIPANEL) && ENABLED(SDSUPPORT) - extern bool abort_sd_printing; -#else - constexpr bool abort_sd_printing = false; -#endif - #endif // ULTRALCD_H diff --git a/Marlin/ultralcd_impl_DOGM.h b/Marlin/ultralcd_impl_DOGM.h index c5fd1999cb..935b9929d4 100644 --- a/Marlin/ultralcd_impl_DOGM.h +++ b/Marlin/ultralcd_impl_DOGM.h @@ -356,10 +356,8 @@ static void lcd_implementation_init() { OUT_WRITE(LCD_BACKLIGHT_PIN, HIGH); #endif - #if ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) - OUT_WRITE(LCD_PINS_RS, LOW); - _delay_ms(500); - OUT_WRITE(LCD_PINS_RS, HIGH); + #if !defined(LCD_RESET_PIN) && (ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306)) + #define LCD_RESET_PIN LCD_PINS_RS #endif #if PIN_EXISTS(LCD_RESET) @@ -369,7 +367,7 @@ static void lcd_implementation_init() { _delay_ms(5); // delay to allow the display to initalize #endif - #if PIN_EXISTS(LCD_RESET) || ENABLED(MKS_12864OLED) || ENABLED(MKS_12864OLED_SSD1306) + #if PIN_EXISTS(LCD_RESET) u8g.begin(); #endif @@ -468,7 +466,7 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop int8_t n = LCD_WIDTH - (START_COL); if (center && !valstr) { - int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2; + int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; while (--pad >= 0) { u8g.print(' '); n--; } } while (n > 0 && (c = pgm_read_byte(pstr))) { @@ -514,7 +512,7 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop if (!PAGE_CONTAINS(row_y1, row_y2)) return; - const uint8_t vallen = (pgm ? lcd_strlen_P(data) : (lcd_strlen((char*)data))); + const uint8_t vallen = (pgm ? utf8_strlen_P(data) : utf8_strlen((char*)data)); uint8_t n = LCD_WIDTH - (START_COL) - 2 - vallen; while (char c = pgm_read_byte(pstr)) { @@ -535,8 +533,8 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop #define DRAW_BOOL_SETTING(sel, row, pstr, data) lcd_implementation_drawmenu_setting_edit_generic_P(sel, row, pstr, (*(data))?PSTR(MSG_ON):PSTR(MSG_OFF)) void lcd_implementation_drawedit(const char* const pstr, const char* const value=NULL) { - const uint8_t labellen = lcd_strlen_P(pstr), - vallen = lcd_strlen(value); + const uint8_t labellen = utf8_strlen_P(pstr), + vallen = utf8_strlen(value); uint8_t rows = (labellen > LCD_WIDTH - 2 - vallen) ? 2 : 1; @@ -586,7 +584,7 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop #if ENABLED(SDSUPPORT) - static void _drawmenu_sd(const bool isSelected, const uint8_t row, const char* const pstr, const char* filename, char* const longFilename, const bool isDir) { + static void _drawmenu_sd(const bool isSelected, const uint8_t row, const char* const pstr, CardReader& theCard, const bool isDir) { UNUSED(pstr); lcd_implementation_mark_as_selected(row, isSelected); @@ -594,23 +592,23 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop if (!PAGE_CONTAINS(row_y1, row_y2)) return; constexpr uint8_t maxlen = LCD_WIDTH - (START_COL) - 1; - const char *outstr = longFilename[0] ? longFilename : filename; - if (longFilename[0]) { + const char *outstr = theCard.longest_filename(); + if (theCard.longFilename[0]) { #if ENABLED(SCROLL_LONG_FILENAMES) if (isSelected) { uint8_t name_hash = row; for (uint8_t l = FILENAME_LENGTH; l--;) - name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ filename[l]; // rotate, xor + name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ theCard.filename[l]; // rotate, xor if (filename_scroll_hash != name_hash) { // If the hash changed... filename_scroll_hash = name_hash; // Save the new hash - filename_scroll_max = MAX(0, lcd_strlen(longFilename) - maxlen); // Update the scroll limit + filename_scroll_max = MAX(0, utf8_strlen(theCard.longFilename) - maxlen); // Update the scroll limit filename_scroll_pos = 0; // Reset scroll to the start lcd_status_update_delay = 8; // Don't scroll right away } outstr += filename_scroll_pos; } #else - longFilename[maxlen] = '\0'; // cutoff at screen edge + theCard.longFilename[maxlen] = '\0'; // cutoff at screen edge #endif } @@ -625,8 +623,8 @@ void lcd_implementation_clear() { } // Automatically cleared by Picture Loop while (n) { --n; u8g.print(' '); } } - #define lcd_implementation_drawmenu_sdfile(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, false) - #define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, filename, longFilename) _drawmenu_sd(sel, row, pstr, filename, longFilename, true) + #define lcd_implementation_drawmenu_sdfile(sel, row, pstr, theCard) _drawmenu_sd(sel, row, pstr, theCard, false) + #define lcd_implementation_drawmenu_sddirectory(sel, row, pstr, theCard) _drawmenu_sd(sel, row, pstr, theCard, true) #endif // SDSUPPORT diff --git a/Marlin/ultralcd_impl_HD44780.h b/Marlin/ultralcd_impl_HD44780.h index e2be71332b..779b6d09e4 100644 --- a/Marlin/ultralcd_impl_HD44780.h +++ b/Marlin/ultralcd_impl_HD44780.h @@ -491,7 +491,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { // Scroll the PSTR 'text' in a 'len' wide field for 'time' milliseconds at position col,line void lcd_scroll(const int16_t col, const int16_t line, const char* const text, const int16_t len, const int16_t time) { - uint8_t slen = lcd_strlen_P(text); + uint8_t slen = utf8_strlen_P(text); if (slen < len) { // Fits into, lcd.setCursor(col, line); @@ -531,7 +531,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { } static void logo_lines(const char* const extra) { - int16_t indent = (LCD_WIDTH - 8 - lcd_strlen_P(extra)) / 2; + int16_t indent = (LCD_WIDTH - 8 - utf8_strlen_P(extra)) / 2; lcd.setCursor(indent, 0); lcd.print('\x00'); lcd_printPGM(PSTR( "------" )); lcd.write('\x01'); lcd.setCursor(indent, 1); lcd_printPGM(PSTR("|Marlin|")); lcd_printPGM(extra); lcd.setCursor(indent, 2); lcd.write('\x02'); lcd_printPGM(PSTR( "------" )); lcd.write('\x03'); @@ -546,7 +546,7 @@ void lcd_printPGM_utf(const char *str, uint8_t n=LCD_WIDTH) { #define CENTER_OR_SCROLL(STRING,DELAY) \ lcd_erase_line(3); \ if (strlen(STRING) <= LCD_WIDTH) { \ - lcd.setCursor((LCD_WIDTH - lcd_strlen_P(PSTR(STRING))) / 2, 3); \ + lcd.setCursor((LCD_WIDTH - utf8_strlen_P(PSTR(STRING))) / 2, 3); \ lcd_printPGM_utf(PSTR(STRING)); \ safe_delay(DELAY); \ } \ @@ -803,7 +803,7 @@ static void lcd_implementation_status_screen() { #if ENABLED(SDSUPPORT) lcd.setCursor(0, 2); lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) + if (IS_SD_PRINTING()) lcd.print(itostr3(card.percentDone())); else lcd_printPGM(PSTR("---")); @@ -867,7 +867,7 @@ static void lcd_implementation_status_screen() { lcd.setCursor(7, 2); lcd_printPGM(PSTR("SD")); - if (IS_SD_PRINTING) + if (IS_SD_PRINTING()) lcd.print(itostr3(card.percentDone())); else lcd_printPGM(PSTR("---")); @@ -926,7 +926,7 @@ static void lcd_implementation_status_screen() { static bool last_blink = false; // Get the UTF8 character count of the string - uint8_t slen = lcd_strlen(lcd_status_message); + uint8_t slen = utf8_strlen(lcd_status_message); // If the string fits into the LCD, just print it and do not scroll it if (slen <= LCD_WIDTH) { @@ -947,7 +947,7 @@ static void lcd_implementation_status_screen() { const char *stat = lcd_status_message + status_scroll_offset; // Get the string remaining length - const uint8_t rlen = lcd_strlen(stat); + const uint8_t rlen = utf8_strlen(stat); // If we have enough characters to display if (rlen >= LCD_WIDTH) { @@ -984,7 +984,7 @@ static void lcd_implementation_status_screen() { UNUSED(blink); // Get the UTF8 character count of the string - uint8_t slen = lcd_strlen(lcd_status_message); + uint8_t slen = utf8_strlen(lcd_status_message); // Just print the string to the LCD lcd_print_utf(lcd_status_message, LCD_WIDTH); @@ -995,11 +995,8 @@ static void lcd_implementation_status_screen() { ++slen; } #endif - } - - #if ENABLED(ULTIPANEL) #if ENABLED(ADVANCED_PAUSE_FEATURE) @@ -1019,7 +1016,7 @@ static void lcd_implementation_status_screen() { int8_t n = LCD_WIDTH; lcd.setCursor(0, row); if (center && !valstr) { - int8_t pad = (LCD_WIDTH - lcd_strlen_P(pstr)) / 2; + int8_t pad = (LCD_WIDTH - utf8_strlen_P(pstr)) / 2; while (--pad >= 0) { lcd.write(' '); n--; } } while (n > 0 && (c = pgm_read_byte(pstr))) { @@ -1048,7 +1045,7 @@ static void lcd_implementation_status_screen() { static void lcd_implementation_drawmenu_setting_edit_generic(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) { char c; - uint8_t n = LCD_WIDTH - 2 - lcd_strlen(data); + uint8_t n = LCD_WIDTH - 2 - utf8_strlen(data); lcd.setCursor(0, row); lcd.print(sel ? pre_char : ' '); while ((c = pgm_read_byte(pstr)) && n > 0) { @@ -1061,7 +1058,7 @@ static void lcd_implementation_status_screen() { } static void lcd_implementation_drawmenu_setting_edit_generic_P(const bool sel, const uint8_t row, const char* pstr, const char pre_char, const char* const data) { char c; - uint8_t n = LCD_WIDTH - 2 - lcd_strlen_P(data); + uint8_t n = LCD_WIDTH - 2 - utf8_strlen_P(data); lcd.setCursor(0, row); lcd.print(sel ? pre_char : ' '); while ((c = pgm_read_byte(pstr)) && n > 0) { @@ -1081,8 +1078,8 @@ static void lcd_implementation_status_screen() { lcd_printPGM_utf(pstr); if (value != NULL) { lcd.write(':'); - const uint8_t valrow = (lcd_strlen_P(pstr) + 1 + lcd_strlen(value) + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit - lcd.setCursor((LCD_WIDTH - 1) - (lcd_strlen(value) + 1), valrow); // Right-justified, padded by spaces + const uint8_t valrow = (utf8_strlen_P(pstr) + 1 + utf8_strlen(value) + 1) > (LCD_WIDTH - 2) ? 2 : 1; // Value on the next row if it won't fit + lcd.setCursor((LCD_WIDTH - 1) - (utf8_strlen(value) + 1), valrow); // Right-justified, padded by spaces lcd.write(' '); // overwrite char if value gets shorter lcd_print(value); } @@ -1090,29 +1087,29 @@ static void lcd_implementation_status_screen() { #if ENABLED(SDSUPPORT) - static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, const char* const pstr, const char* filename, char* const longFilename, const uint8_t concat, const char post_char) { + static void lcd_implementation_drawmenu_sd(const bool sel, const uint8_t row, const char* const pstr, CardReader& theCard, const uint8_t concat, const char post_char) { UNUSED(pstr); lcd.setCursor(0, row); lcd.print(sel ? '>' : ' '); uint8_t n = LCD_WIDTH - concat; - const char *outstr = longFilename[0] ? longFilename : filename; - if (longFilename[0]) { + const char *outstr = theCard.longest_filename(); + if (theCard.longFilename[0]) { #if ENABLED(SCROLL_LONG_FILENAMES) if (sel) { uint8_t name_hash = row; for (uint8_t l = FILENAME_LENGTH; l--;) - name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ filename[l]; // rotate, xor + name_hash = ((name_hash << 1) | (name_hash >> 7)) ^ theCard.filename[l]; // rotate, xor if (filename_scroll_hash != name_hash) { // If the hash changed... filename_scroll_hash = name_hash; // Save the new hash - filename_scroll_max = MAX(0, lcd_strlen(longFilename) - n); // Update the scroll limit + filename_scroll_max = MAX(0, utf8_strlen(theCard.longFilename) - n); // Update the scroll limit filename_scroll_pos = 0; // Reset scroll to the start lcd_status_update_delay = 8; // Don't scroll right away } outstr += filename_scroll_pos; } #else - longFilename[n] = '\0'; // cutoff at screen edge + theCard.longFilename[n] = '\0'; // cutoff at screen edge #endif } @@ -1126,12 +1123,12 @@ static void lcd_implementation_status_screen() { lcd.print(post_char); } - static void lcd_implementation_drawmenu_sdfile(const bool sel, const uint8_t row, const char* pstr, const char* filename, char* const longFilename) { - lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2, ' '); + static void lcd_implementation_drawmenu_sdfile(const bool sel, const uint8_t row, const char* pstr, CardReader& theCard) { + lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, ' '); } - static void lcd_implementation_drawmenu_sddirectory(const bool sel, const uint8_t row, const char* pstr, const char* filename, char* const longFilename) { - lcd_implementation_drawmenu_sd(sel, row, pstr, filename, longFilename, 2, LCD_STR_FOLDER[0]); + static void lcd_implementation_drawmenu_sddirectory(const bool sel, const uint8_t row, const char* pstr, CardReader& theCard) { + lcd_implementation_drawmenu_sd(sel, row, pstr, theCard, 2, LCD_STR_FOLDER[0]); } #endif // SDSUPPORT diff --git a/Marlin/ultralcd_st7565_u8glib_VIKI.h b/Marlin/ultralcd_st7565_u8glib_VIKI.h index 9ab142b2e8..adb48ea6b2 100644 --- a/Marlin/ultralcd_st7565_u8glib_VIKI.h +++ b/Marlin/ultralcd_st7565_u8glib_VIKI.h @@ -89,7 +89,7 @@ #if HARDWARE_SPI // using the hardware SPI #define ST7565_WRITE_BYTE(a) { SPDR = a; while (!TEST(SPSR, SPIF)); U8G_DELAY(); } - #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {SPDR = *ptr++; while (!TEST(SPSR, SPIF));} DELAY_10US; } + #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) {SPDR = *ptr++; while (!TEST(SPSR, SPIF));} U8G_DELAY(); } #else // !HARDWARE_SPI @@ -112,7 +112,7 @@ } #define ST7565_WRITE_BYTE(a) { ST7565_SWSPI_SND_8BIT((uint8_t)a); U8G_DELAY(); } - #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) { ST7565_SWSPI_SND_8BIT(*ptr++); } DELAY_10US; } + #define ST7560_WriteSequence(count, pointer) { uint8_t *ptr = pointer; for (uint8_t i = 0; i < count; i++) { ST7565_SWSPI_SND_8BIT(*ptr++); } U8G_DELAY(); } #endif // !HARDWARE_SPI diff --git a/Marlin/ultralcd_st7920_u8glib_rrd.h b/Marlin/ultralcd_st7920_u8glib_rrd.h index db6224e478..b65a1655d5 100644 --- a/Marlin/ultralcd_st7920_u8glib_rrd.h +++ b/Marlin/ultralcd_st7920_u8glib_rrd.h @@ -53,7 +53,7 @@ #define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(188) #define CPU_ST7920_DELAY_3 DELAY_NS(0) -#elif MB(MINIRAMBO) +#elif MB(MINIRAMBO) || MB(EINSY_RAMBO) || MB(EINSY_RETRO) #define CPU_ST7920_DELAY_1 DELAY_NS(0) #define CPU_ST7920_DELAY_2 DELAY_NS(250) #define CPU_ST7920_DELAY_3 DELAY_NS(0)