diff --git a/Marlin/src/HAL/RP2040/pinsDebug.h b/Marlin/src/HAL/RP2040/pinsDebug.h
index 964fb71086..f3842c4aff 100644
--- a/Marlin/src/HAL/RP2040/pinsDebug.h
+++ b/Marlin/src/HAL/RP2040/pinsDebug.h
@@ -107,7 +107,7 @@ uint8_t get_pin_mode(const pin_t Ard_num) {
 
   uint dir = gpio_get_dir( Ard_num);
 
-  if(dir) return MODE_PIN_OUTPUT;
+  if (dir) return MODE_PIN_OUTPUT;
   else return MODE_PIN_INPUT;
 
 }
diff --git a/Marlin/src/MarlinCore.cpp b/Marlin/src/MarlinCore.cpp
index 689f71f8e5..3c44a9b71f 100644
--- a/Marlin/src/MarlinCore.cpp
+++ b/Marlin/src/MarlinCore.cpp
@@ -736,7 +736,7 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {
       WRITE(FET_SAFETY_PIN, FET_SAFETY_INVERTED);
     }
   #endif
-}
+} // manage_inactivity()
 
 #if ALL(EP_BABYSTEPPING, EMERGENCY_PARSER)
   #include "feature/babystep.h"
@@ -890,7 +890,7 @@ void idle(const bool no_stepper_sleep/*=false*/) {
   TERN_(MARLIN_DEV_MODE, idle_depth--);
 
   return;
-}
+} // idle()
 
 /**
  * Kill all activity and lock the machine.
@@ -983,7 +983,7 @@ void stop() {
     safe_delay(350);       // allow enough time for messages to get out before stopping
     marlin_state = MarlinState::MF_STOPPED;
   }
-}
+} // stop()
 
 inline void tmc_standby_setup() {
   #if PIN_EXISTS(X_STDBY)
@@ -1052,7 +1052,7 @@ inline void tmc_standby_setup() {
   #if PIN_EXISTS(E7_STDBY)
     SET_INPUT_PULLDOWN(E7_STDBY_PIN);
   #endif
-}
+} // tmc_standby_setup()
 
 /**
  * Marlin Firmware entry-point. Abandon Hope All Ye Who Enter Here.
@@ -1702,7 +1702,7 @@ void setup() {
   SETUP_LOG("setup() completed.");
 
   TERN_(MARLIN_TEST_BUILD, runStartupTests());
-}
+} // setup()
 
 /**
  * The main Marlin program loop
diff --git a/Marlin/src/module/probe.cpp b/Marlin/src/module/probe.cpp
index e121bca812..4f7d7c7690 100644
--- a/Marlin/src/module/probe.cpp
+++ b/Marlin/src/module/probe.cpp
@@ -275,7 +275,7 @@ xyz_pos_t Probe::offset; // Initialized by settings.load
     #ifdef MAG_MOUNTED_PRE_DEPLOY
       constexpr mag_probe_move_t pre_deploy = MAG_MOUNTED_PRE_DEPLOY;
       do_blocking_move_to(pre_deploy.where, MMM_TO_MMS(pre_deploy.fr_mm_min));
-    #endif    
+    #endif
     #if HAS_MAG_MOUNTED_SERVO_PROBE
       servo[MAG_MOUNTED_PROBE_SERVO_NR].move(servo_angles[MAG_MOUNTED_PROBE_SERVO_NR][0]);
     #endif