diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index c8437f9e7e..b43c3eea99 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1655,6 +1655,8 @@
     #define USE_UHS2_USB
     //#define USE_UHS3_USB
 
+    #define DISABLE_DUE_SD_MMC // Disable USB Host access to USB Drive to prevent hangs on block access for DUE platform
+
     /**
      * Native USB Host supported by some boards (USB OTG)
      */
diff --git a/Marlin/src/pins/sam/pins_ARCHIM2.h b/Marlin/src/pins/sam/pins_ARCHIM2.h
index ecff888ff0..173f023772 100644
--- a/Marlin/src/pins/sam/pins_ARCHIM2.h
+++ b/Marlin/src/pins/sam/pins_ARCHIM2.h
@@ -237,7 +237,7 @@
 //
 // LCD / Controller
 //
-#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
+#if ANY(HAS_WIRED_LCD, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE, USB_FLASH_DRIVE_SUPPORT)
   #define BEEPER_PIN                          23  // D24 PA15_CTS1
   #define LCD_PINS_RS                         17  // D17 PA12_RXD1
   #define LCD_PINS_ENABLE                     24  // D23 PA14_RTS1
@@ -249,9 +249,13 @@
   #define SD_DETECT_PIN                        2  // D2  PB25_TIOA0
 #endif
 
-#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE)
+#if ANY(IS_ULTIPANEL, TOUCH_UI_ULTIPANEL, TOUCH_UI_FTDI_EVE, USB_FLASH_DRIVE_SUPPORT)
   // Buttons on AUX-2
   #define BTN_EN1                             60  // D60 PA3_TIOB1
   #define BTN_EN2                             13  // D13 PB27_TIOB0
   #define BTN_ENC                             16  // D16 PA13_TXD1 // the click
 #endif
+
+#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+  #define DISABLE_DUE_SD_MMC
+#endif
diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
index a681af4efa..f0165690e2 100644
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
@@ -161,16 +161,16 @@ void DiskIODriver_USBFlash::idle() {
         laststate = task_state;
         #define UHS_USB_DEBUG(x) case UHS_STATE(x): SERIAL_ECHOLNPGM(#x); break
         switch (task_state) {
-          UHS_USB_DEBUG(IDLE);
-          UHS_USB_DEBUG(RESET_DEVICE);
-          UHS_USB_DEBUG(RESET_NOT_COMPLETE);
-          UHS_USB_DEBUG(DEBOUNCE);
-          UHS_USB_DEBUG(DEBOUNCE_NOT_COMPLETE);
-          UHS_USB_DEBUG(WAIT_SOF);
-          UHS_USB_DEBUG(ERROR);
-          UHS_USB_DEBUG(CONFIGURING);
-          UHS_USB_DEBUG(CONFIGURING_DONE);
-          UHS_USB_DEBUG(RUNNING);
+          SERIAL_ECHOLNPGM("IDLE");
+          SERIAL_ECHOLNPGM("RESET_DEVICE");
+          SERIAL_ECHOLNPGM("RESET_NOT_COMPLETE");
+          SERIAL_ECHOLNPGM("DEBOUNCE");
+          SERIAL_ECHOLNPGM("DEBOUNCE_NOT_COMPLETE");
+          SERIAL_ECHOLNPGM("WAIT_SOF");
+          SERIAL_ECHOLNPGM("ERROR");
+          SERIAL_ECHOLNPGM("CONFIGURING");
+          SERIAL_ECHOLNPGM("CONFIGURING_DONE");
+          SERIAL_ECHOLNPGM("RUNNING");
           default:
             SERIAL_ECHOLNPGM("UHS_USB_HOST_STATE: ", task_state);
             break;