Bump to head
This commit is contained in:
InsanityAutomation
@@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -307,6 +321,7 @@
|
||||
#define AUTO_POWER_FANS // Turn on PSU if fans need power
|
||||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define POWER_TIMEOUT 30
|
||||
#endif
|
||||
|
||||
@@ -363,11 +378,13 @@
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
@@ -377,7 +394,6 @@
|
||||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
@@ -396,8 +412,6 @@
|
||||
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
// Below this temperature the heater will be switched off
|
||||
// because it probably indicates a broken thermistor wire.
|
||||
#define HEATER_0_MINTEMP 5
|
||||
@@ -407,7 +421,6 @@
|
||||
#define HEATER_4_MINTEMP 5
|
||||
#define HEATER_5_MINTEMP 5
|
||||
#define BED_MINTEMP 5
|
||||
#define CHAMBER_MINTEMP 5
|
||||
|
||||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
@@ -419,7 +432,6 @@
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#define HEATER_5_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define CHAMBER_MAXTEMP 100
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
@@ -462,7 +474,7 @@
|
||||
#endif // PIDTEMP
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID > Bed Temperature Control ===============
|
||||
//====================== PID > Bed Temperature Control ======================
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
@@ -816,18 +828,14 @@
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
@@ -918,6 +926,9 @@
|
||||
|
||||
// Before deploy/stow pause for user confirmation
|
||||
//#define PAUSE_BEFORE_DEPLOY_STOW
|
||||
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
|
||||
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable one or more of the following if probing seems unreliable.
|
||||
@@ -1349,17 +1360,21 @@
|
||||
|
||||
// @section extras
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
// M500 - stores parameters in EEPROM
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
/**
|
||||
* EEPROM
|
||||
*
|
||||
* Persistent storage to preserve configurable settings across reboots.
|
||||
*
|
||||
* M500 - Store settings to EEPROM.
|
||||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#endif
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
@@ -1413,7 +1428,7 @@
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
@@ -1893,6 +1908,14 @@
|
||||
//
|
||||
//#define MKS_MINI_12864
|
||||
|
||||
//
|
||||
// FYSETC variant of the MINI12864 graphic controller with SD support
|
||||
// https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||
//
|
||||
//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
|
||||
//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
|
||||
//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
|
||||
|
||||
//
|
||||
// Factory display for Creality CR-10
|
||||
// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
|
||||
@@ -1995,6 +2018,7 @@
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
// However, control resolution will be halved for each increment;
|
||||
// at zero value, there are 128 effective control positions.
|
||||
// :[0,1,2,3,4,5,6,7]
|
||||
#define SOFT_PWM_SCALE 0
|
||||
|
||||
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
|
||||
@@ -2050,17 +2074,17 @@
|
||||
//#define RGBW_LED
|
||||
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
#define RGB_LED_W_PIN -1
|
||||
//#define RGB_LED_R_PIN 34
|
||||
//#define RGB_LED_G_PIN 43
|
||||
//#define RGB_LED_B_PIN 35
|
||||
//#define RGB_LED_W_PIN -1
|
||||
#endif
|
||||
|
||||
// Support for Adafruit Neopixel LED driver
|
||||
//#define NEOPIXEL_LED
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin
|
||||
#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip
|
||||
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
|
||||
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
|
||||
|
||||
@@ -39,6 +39,57 @@
|
||||
//=============================Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
||||
//
|
||||
// Custom Thermistor 1000 parameters
|
||||
//
|
||||
#if TEMP_SENSOR_0 == 1000
|
||||
#define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND0_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_1 == 1000
|
||||
#define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND1_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_2 == 1000
|
||||
#define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND2_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_3 == 1000
|
||||
#define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND3_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_4 == 1000
|
||||
#define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND4_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_5 == 1000
|
||||
#define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND5_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED == 1000
|
||||
#define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define BED_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_CHAMBER == 1000
|
||||
#define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
//
|
||||
// Hephestos 2 24V heated bed upgrade kit.
|
||||
// https://store.bq.com/en/heated-bed-kit-hephestos2
|
||||
@@ -50,6 +101,18 @@
|
||||
#define HEATER_BED_INVERTING true
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Heated Chamber settings
|
||||
*/
|
||||
#if TEMP_SENSOR_CHAMBER
|
||||
#define CHAMBER_MINTEMP 5
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
|
||||
//#define HEATER_CHAMBER_INVERTING false
|
||||
#endif
|
||||
|
||||
#if DISABLED(PIDTEMPBED)
|
||||
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
|
||||
#if ENABLED(BED_LIMIT_SWITCHING)
|
||||
@@ -127,8 +190,8 @@
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
//#define PID_EXTRUSION_SCALING
|
||||
#if ENABLED(PID_EXTRUSION_SCALING)
|
||||
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
|
||||
@@ -456,6 +519,7 @@
|
||||
#define Z_HOME_BUMP_MM 2
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
|
||||
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
|
||||
|
||||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
@@ -773,8 +837,11 @@
|
||||
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
|
||||
#define SDCARD_RATHERRECENTFIRST
|
||||
|
||||
// Add an option in the menu to run all auto#.g files
|
||||
//#define MENU_ADDAUTOSTART
|
||||
#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
|
||||
|
||||
//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
|
||||
|
||||
#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
|
||||
|
||||
/**
|
||||
* Continue after Power-Loss (Creality3D)
|
||||
@@ -786,8 +853,14 @@
|
||||
*/
|
||||
//#define POWER_LOSS_RECOVERY
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
|
||||
|
||||
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
|
||||
// especially with "vase mode" printing. Set too high and vases cannot be continued.
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -890,6 +963,17 @@
|
||||
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
|
||||
//#define BINARY_FILE_TRANSFER
|
||||
|
||||
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
|
||||
#ifdef TARGET_LPC1768
|
||||
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
|
||||
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
|
||||
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
|
||||
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
|
||||
#if ENABLED(LPC_SD_ONBOARD)
|
||||
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // SDSUPPORT
|
||||
|
||||
/**
|
||||
@@ -962,19 +1046,28 @@
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
|
||||
|
||||
// Frivolous Game Options
|
||||
//#define MARLIN_BRICKOUT
|
||||
//#define MARLIN_INVADERS
|
||||
//#define MARLIN_SNAKE
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
// The hardware watchdog should reset the microcontroller disabling all outputs,
|
||||
// in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
/**
|
||||
* The watchdog hardware timer will do a reset and disable all outputs
|
||||
* if the firmware gets too overloaded to read the temperature sensors.
|
||||
*
|
||||
* If you find that watchdog reboot causes your AVR board to hang forever,
|
||||
* enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
|
||||
* NOTE: This method is less reliable as it can only catch hangups while
|
||||
* interrupts are enabled.
|
||||
*/
|
||||
#define USE_WATCHDOG
|
||||
|
||||
#if ENABLED(USE_WATCHDOG)
|
||||
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
||||
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
|
||||
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
||||
//#define WATCHDOG_RESET_MANUAL
|
||||
#endif
|
||||
|
||||
@@ -1005,6 +1098,8 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
@@ -1324,6 +1419,7 @@
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
|
||||
@@ -249,13 +249,27 @@
|
||||
* the E3D Tool Changer. Toolheads are locked with a servo.
|
||||
*/
|
||||
//#define SWITCHING_TOOLHEAD
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
|
||||
/**
|
||||
* Magnetic Switching Toolhead
|
||||
*
|
||||
* Support swappable and dockable toolheads with a magnetic
|
||||
* docking mechanism using movement and no servo.
|
||||
*/
|
||||
//#define MAGNETIC_SWITCHING_TOOLHEAD
|
||||
|
||||
#if EITHER(SWITCHING_TOOLHEAD, MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
|
||||
#define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
|
||||
#define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
|
||||
#if ENABLED(SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
|
||||
#define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
|
||||
#elif ENABLED(MAGNETIC_SWITCHING_TOOLHEAD)
|
||||
#define SWITCHING_TOOLHEAD_Y_RELEASE 5 // (mm) Security distance Y axis
|
||||
#define SWITCHING_TOOLHEAD_X_SECURITY -35 // (mm) Security distance X axis
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -307,6 +321,7 @@
|
||||
#define AUTO_POWER_FANS // Turn on PSU if fans need power
|
||||
#define AUTO_POWER_E_FANS
|
||||
#define AUTO_POWER_CONTROLLERFAN
|
||||
#define AUTO_POWER_CHAMBER_FAN
|
||||
#define POWER_TIMEOUT 30
|
||||
#endif
|
||||
|
||||
@@ -363,11 +378,13 @@
|
||||
* 147 : Pt100 with 4k7 pullup
|
||||
* 110 : Pt100 with 1k pullup (non standard)
|
||||
*
|
||||
* 1000 : Custom - Specify parameters in Configuration_adv.h
|
||||
*
|
||||
* Use these for Testing or Development purposes. NEVER for production machine.
|
||||
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
|
||||
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
|
||||
*
|
||||
* :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
|
||||
* :{ '0':"Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '67':"Slice Engineering 450C High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595", '998':"Dummy 1", '999':"Dummy 2", '1000':"Custom thermistor params" }
|
||||
*/
|
||||
#define TEMP_SENSOR_0 1
|
||||
#define TEMP_SENSOR_1 0
|
||||
@@ -377,7 +394,6 @@
|
||||
#define TEMP_SENSOR_5 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
@@ -396,8 +412,6 @@
|
||||
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
#define TEMP_CHAMBER_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
// Below this temperature the heater will be switched off
|
||||
// because it probably indicates a broken thermistor wire.
|
||||
#define HEATER_0_MINTEMP 5
|
||||
@@ -407,7 +421,6 @@
|
||||
#define HEATER_4_MINTEMP 5
|
||||
#define HEATER_5_MINTEMP 5
|
||||
#define BED_MINTEMP 5
|
||||
#define CHAMBER_MINTEMP 5
|
||||
|
||||
// Above this temperature the heater will be switched off.
|
||||
// This can protect components from overheating, but NOT from shorts and failures.
|
||||
@@ -419,7 +432,6 @@
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#define HEATER_5_MAXTEMP 275
|
||||
#define BED_MAXTEMP 150
|
||||
#define CHAMBER_MAXTEMP 100
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
@@ -462,7 +474,7 @@
|
||||
#endif // PIDTEMP
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID > Bed Temperature Control ===============
|
||||
//====================== PID > Bed Temperature Control ======================
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
@@ -816,18 +828,14 @@
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
//#define BLTOUCH_DELAY 500 // Minimum Command delay (ms). Enable and increase if needed
|
||||
|
||||
/**
|
||||
* BLTouch V3.0 and newer smart series
|
||||
* For genuine BLTouch 3.0 sensors. Clones may be confused by 3.0 command angles. YMMV.
|
||||
* If the pin trigger is not detected, first try swapping the black and white wires then toggle this.
|
||||
*/
|
||||
//#define BLTOUCH_V3
|
||||
#if ENABLED(BLTOUCH_V3)
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
|
||||
#endif
|
||||
//#define BLTOUCH_FORCE_5V_MODE
|
||||
#endif
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
@@ -918,6 +926,9 @@
|
||||
|
||||
// Before deploy/stow pause for user confirmation
|
||||
//#define PAUSE_BEFORE_DEPLOY_STOW
|
||||
#if ENABLED(PAUSE_BEFORE_DEPLOY_STOW)
|
||||
//#define PAUSE_PROBE_DEPLOY_WHEN_TRIGGERED // For Manual Deploy Allenkey Probe
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Enable one or more of the following if probing seems unreliable.
|
||||
@@ -1349,17 +1360,21 @@
|
||||
|
||||
// @section extras
|
||||
|
||||
//
|
||||
// EEPROM
|
||||
//
|
||||
// The microcontroller can store settings in the EEPROM, e.g. max velocity...
|
||||
// M500 - stores parameters in EEPROM
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
/**
|
||||
* EEPROM
|
||||
*
|
||||
* Persistent storage to preserve configurable settings across reboots.
|
||||
*
|
||||
* M500 - Store settings to EEPROM.
|
||||
* M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
|
||||
* M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
|
||||
*/
|
||||
//#define EEPROM_SETTINGS // Persistent storage with M500 and M501
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
//#define EEPROM_AUTO_INIT // Init EEPROM automatically on any errors.
|
||||
#endif
|
||||
|
||||
//
|
||||
// Host Keepalive
|
||||
@@ -1413,7 +1428,7 @@
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
// Specify a park position as { X, Y, Z_raise }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // (mm/s) X and Y axes feedrate (also used for delta Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // (mm/s) Z axis feedrate (not used for delta printers)
|
||||
@@ -1893,6 +1908,14 @@
|
||||
//
|
||||
//#define MKS_MINI_12864
|
||||
|
||||
//
|
||||
// FYSETC variant of the MINI12864 graphic controller with SD support
|
||||
// https://wiki.fysetc.com/Mini12864_Panel/?fbclid=IwAR1FyjuNdVOOy9_xzky3qqo_WeM5h-4gpRnnWhQr_O1Ef3h0AFnFXmCehK8
|
||||
//
|
||||
//#define FYSETC_MINI_12864_1_2 // Type C/D/E/F. Simple RGB Backlight (always on)
|
||||
//#define FYSETC_MINI_12864_2_0 // Type A/B. Discreet RGB Backlight
|
||||
//#define FYSETC_MINI_12864_2_1 // Type A/B. Neopixel RGB Backlight
|
||||
|
||||
//
|
||||
// Factory display for Creality CR-10
|
||||
// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
|
||||
@@ -1995,6 +2018,7 @@
|
||||
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
|
||||
// However, control resolution will be halved for each increment;
|
||||
// at zero value, there are 128 effective control positions.
|
||||
// :[0,1,2,3,4,5,6,7]
|
||||
#define SOFT_PWM_SCALE 0
|
||||
|
||||
// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
|
||||
@@ -2050,17 +2074,17 @@
|
||||
//#define RGBW_LED
|
||||
|
||||
#if EITHER(RGB_LED, RGBW_LED)
|
||||
#define RGB_LED_R_PIN 34
|
||||
#define RGB_LED_G_PIN 43
|
||||
#define RGB_LED_B_PIN 35
|
||||
#define RGB_LED_W_PIN -1
|
||||
//#define RGB_LED_R_PIN 34
|
||||
//#define RGB_LED_G_PIN 43
|
||||
//#define RGB_LED_B_PIN 35
|
||||
//#define RGB_LED_W_PIN -1
|
||||
#endif
|
||||
|
||||
// Support for Adafruit Neopixel LED driver
|
||||
//#define NEOPIXEL_LED
|
||||
#if ENABLED(NEOPIXEL_LED)
|
||||
#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
|
||||
#define NEOPIXEL_PIN 4 // LED driving pin
|
||||
#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip
|
||||
#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
|
||||
#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
|
||||
|
||||
@@ -39,6 +39,57 @@
|
||||
//=============================Thermal Settings ============================
|
||||
//===========================================================================
|
||||
|
||||
//
|
||||
// Custom Thermistor 1000 parameters
|
||||
//
|
||||
#if TEMP_SENSOR_0 == 1000
|
||||
#define HOTEND0_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND0_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND0_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_1 == 1000
|
||||
#define HOTEND1_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND1_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND1_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_2 == 1000
|
||||
#define HOTEND2_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND2_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND2_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_3 == 1000
|
||||
#define HOTEND3_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND3_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND3_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_4 == 1000
|
||||
#define HOTEND4_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND4_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND4_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_5 == 1000
|
||||
#define HOTEND5_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define HOTEND5_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define HOTEND5_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_BED == 1000
|
||||
#define BED_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define BED_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define BED_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_CHAMBER == 1000
|
||||
#define CHAMBER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
|
||||
#define CHAMBER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
|
||||
#define CHAMBER_BETA 3950 // Beta value
|
||||
#endif
|
||||
|
||||
//
|
||||
// Hephestos 2 24V heated bed upgrade kit.
|
||||
// https://store.bq.com/en/heated-bed-kit-hephestos2
|
||||
@@ -50,6 +101,18 @@
|
||||
#define HEATER_BED_INVERTING true
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Heated Chamber settings
|
||||
*/
|
||||
#if TEMP_SENSOR_CHAMBER
|
||||
#define CHAMBER_MINTEMP 5
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
|
||||
//#define HEATER_CHAMBER_INVERTING false
|
||||
#endif
|
||||
|
||||
#if DISABLED(PIDTEMPBED)
|
||||
#define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
|
||||
#if ENABLED(BED_LIMIT_SWITCHING)
|
||||
@@ -127,8 +190,8 @@
|
||||
#endif
|
||||
|
||||
#if ENABLED(PIDTEMP)
|
||||
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
|
||||
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
|
||||
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
|
||||
// A well-chosen Kc value should add just enough power to melt the increased material volume.
|
||||
//#define PID_EXTRUSION_SCALING
|
||||
#if ENABLED(PID_EXTRUSION_SCALING)
|
||||
#define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
|
||||
@@ -456,6 +519,7 @@
|
||||
#define Z_HOME_BUMP_MM 2
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
|
||||
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
|
||||
|
||||
// When G28 is called, this option will make Y home before X
|
||||
//#define HOME_Y_BEFORE_X
|
||||
@@ -773,8 +837,11 @@
|
||||
// Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
|
||||
#define SDCARD_RATHERRECENTFIRST
|
||||
|
||||
// Add an option in the menu to run all auto#.g files
|
||||
//#define MENU_ADDAUTOSTART
|
||||
#define SD_MENU_CONFIRM_START // Confirm the selected SD file before printing
|
||||
|
||||
//#define MENU_ADDAUTOSTART // Add a menu option to run auto#.g files
|
||||
|
||||
#define EVENT_GCODE_SD_STOP "G28XY" // G-code to run on Stop Print (e.g., "G28XY" or "G27")
|
||||
|
||||
/**
|
||||
* Continue after Power-Loss (Creality3D)
|
||||
@@ -786,8 +853,14 @@
|
||||
*/
|
||||
//#define POWER_LOSS_RECOVERY
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
|
||||
|
||||
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
|
||||
// especially with "vase mode" printing. Set too high and vases cannot be continued.
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -890,6 +963,17 @@
|
||||
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
|
||||
//#define BINARY_FILE_TRANSFER
|
||||
|
||||
// LPC-based boards have on-board SD Card options. Override here or defaults apply.
|
||||
#ifdef TARGET_LPC1768
|
||||
//#define LPC_SD_LCD // Use the SD drive in the external LCD controller.
|
||||
//#define LPC_SD_ONBOARD // Use the SD drive on the control board. (No SD_DETECT_PIN. M21 to init.)
|
||||
//#define LPC_SD_CUSTOM_CABLE // Use a custom cable to access the SD (as defined in a pins file).
|
||||
//#define USB_SD_DISABLED // Disable SD Card access over USB (for security).
|
||||
#if ENABLED(LPC_SD_ONBOARD)
|
||||
//#define USB_SD_ONBOARD // Provide the onboard SD card to the host as a USB mass storage device.
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // SDSUPPORT
|
||||
|
||||
/**
|
||||
@@ -962,19 +1046,28 @@
|
||||
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
//#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
|
||||
|
||||
// Frivolous Game Options
|
||||
//#define MARLIN_BRICKOUT
|
||||
//#define MARLIN_INVADERS
|
||||
//#define MARLIN_SNAKE
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
// The hardware watchdog should reset the microcontroller disabling all outputs,
|
||||
// in case the firmware gets stuck and doesn't do temperature regulation.
|
||||
/**
|
||||
* The watchdog hardware timer will do a reset and disable all outputs
|
||||
* if the firmware gets too overloaded to read the temperature sensors.
|
||||
*
|
||||
* If you find that watchdog reboot causes your AVR board to hang forever,
|
||||
* enable WATCHDOG_RESET_MANUAL to use a custom timer instead of WDTO.
|
||||
* NOTE: This method is less reliable as it can only catch hangups while
|
||||
* interrupts are enabled.
|
||||
*/
|
||||
//#define USE_WATCHDOG
|
||||
|
||||
#if ENABLED(USE_WATCHDOG)
|
||||
// If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
|
||||
// The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
|
||||
// However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
|
||||
//#define WATCHDOG_RESET_MANUAL
|
||||
#endif
|
||||
|
||||
@@ -1005,6 +1098,8 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
@@ -1324,6 +1419,7 @@
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
#define ADVANCED_PAUSE_RESUME_PRIME 0 // (mm) Extra distance to prime nozzle after returning from park.
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
|
||||
Reference in New Issue
Block a user