diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index e86c88978a..57d2e47c68 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1543,6 +1543,7 @@ static_assert(NUM_SERVOS <= NUM_SERVO_PLUGS, "NUM_SERVOS (or some servo index) i
   #else
     #ifndef BED_TRAMMING_INSET_LFRB
       #error "LCD_BED_TRAMMING requires BED_TRAMMING_INSET_LFRB values."
+    #endif
   #endif
 #endif
 
diff --git a/Marlin/src/lcd/e3v2/proui/dwin.cpp b/Marlin/src/lcd/e3v2/proui/dwin.cpp
index f3515bc752..33f2baf9ad 100644
--- a/Marlin/src/lcd/e3v2/proui/dwin.cpp
+++ b/Marlin/src/lcd/e3v2/proui/dwin.cpp
@@ -2389,8 +2389,8 @@ void setFlow() { setPIntOnClick(FLOW_EDIT_MIN, FLOW_EDIT_MAX, []{ planner.refres
 
   void tramXY(const uint8_t point, float &x, float &y) {
     #if ENABLED(BED_TRAMMING_USE_PROBE)
-      float bed_tramming_inset_lfbr[] = {X_MIN_BED + probe.min_x(), Y_MIN_BED + probe.min_y(),
-             X_MAX_BED - probe.max_x(), Y_MAX_BED - probe.max_y() };
+      float bed_tramming_inset_lfbr[] = {X_MIN_BED + probe.min_x() + 0.01f, Y_MIN_BED + probe.min_y() + 0.01f,
+             X_MAX_BED - probe.max_x() - 0.01f, Y_MAX_BED - probe.max_y() - 0.01f };
     #endif
 
     switch (point) {
diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp
index a2cb354ac7..2f7ca4b426 100644
--- a/Marlin/src/lcd/extui/ui_api.cpp
+++ b/Marlin/src/lcd/extui/ui_api.cpp
@@ -933,7 +933,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; }
     void setProbeOffset_mm(const_float_t val, const axis_t axis) { probe.offset.pos[axis] = val; }
-    float[4] getBedProbeLimits() {return {probe.min_x(), probe.min_y(), probe.max_x(), probe.max_y()};}
+    probe_limits getBedProbeLimits() {return (probe_limits){probe.min_x(), probe.min_y(), probe.max_x(), probe.max_y()};}
   #endif
 
   #if ENABLED(BACKLASH_GCODE)
diff --git a/Marlin/src/lcd/extui/ui_api.h b/Marlin/src/lcd/extui/ui_api.h
index d71a92879c..dd9d6f789d 100644
--- a/Marlin/src/lcd/extui/ui_api.h
+++ b/Marlin/src/lcd/extui/ui_api.h
@@ -74,6 +74,7 @@ namespace ExtUI {
   #if ENABLED(MPC_AUTOTUNE)
     enum mpcresult_t : uint8_t { MPC_STARTED, MPC_TEMP_ERROR, MPC_INTERRUPTED, MPC_DONE };
   #endif
+  struct probe_limits { float pos[4];};
 
   constexpr uint8_t extruderCount = EXTRUDERS;
   constexpr uint8_t hotendCount   = HOTENDS;
@@ -367,7 +368,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t);
     void setProbeOffset_mm(const_float_t, const axis_t);
-    float[4] getBedProbeLimits();
+    probe_limits getBedProbeLimits();
   #endif
 
   // Backlash Control
diff --git a/Marlin/src/lcd/menu/menu_bed_tramming.cpp b/Marlin/src/lcd/menu/menu_bed_tramming.cpp
index 34e5142811..e344a28d43 100644
--- a/Marlin/src/lcd/menu/menu_bed_tramming.cpp
+++ b/Marlin/src/lcd/menu/menu_bed_tramming.cpp
@@ -106,8 +106,8 @@ static int8_t bed_corner;
  */
 static void _lcd_goto_next_corner() {
   #if ENABLED(BED_TRAMMING_USE_PROBE)
-    xy_pos_t lf = {X_MIN_BED + probe.min_x(), Y_MIN_BED + probe.min_y() },
-             rb = {X_MAX_BED - probe.max_x(), Y_MAX_BED - probe.max_y() };
+    xy_pos_t lf = {X_MIN_BED + probe.min_x() + 0.01f, Y_MIN_BED + probe.min_y() + 0.01f },
+             rb = {X_MAX_BED - probe.max_x() - 0.01f, Y_MAX_BED - probe.max_y() - 0.01f };
   #endif
 
   xy_pos_t corner_point = lf;                     // Left front