diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index fe62ef3f2b..bb5885400a 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -162,8 +162,8 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
-  #define THERMAL_PROTECTION_HYSTERESIS 15     // Degrees Celsius
+  #define THERMAL_PROTECTION_PERIOD 70        // Seconds
+  #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
   #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
   #if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
@@ -182,7 +182,7 @@
    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
    * below 2.
    */
-  #define WATCH_TEMP_PERIOD 30                // Seconds
+  #define WATCH_TEMP_PERIOD 40                // Seconds
   #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
@@ -190,7 +190,7 @@
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD        20 // Seconds
+  #define THERMAL_PROTECTION_BED_PERIOD        30 // Seconds
   #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // Degrees Celsius
 
   /**
@@ -205,7 +205,7 @@
  */
 #if ENABLED(THERMAL_PROTECTION_CHAMBER)
   #define THERMAL_PROTECTION_CHAMBER_PERIOD    60 // Seconds
-  #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius
+  #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
 
   /**
    * Heated chamber watch settings (M141/M191).