diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 2cacbe42c1..1c468aa618 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -1,4 +1,4 @@
-//#define ABL_BLTOUCH // Replaces RGB LED
+#define ABL_BLTOUCH // Replaces RGB LED
 #define GraphicalLCD // Will work next to MKS TFT
 #define TMC_2209 // Defaults to TMC2100
 //#define ABL_UBL // Defaults to Bilinear
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 6a960fea4a..c828fa8789 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -2522,7 +2522,7 @@
 /**
  * User-defined menu items that execute custom GCode
  */
-#if(ENABLED(ABL_UBL) || ENABLED(ABL_BLTOUCH))
+#if ANY(ABL_UBL, ABL_BLTOUCH)
   #define CUSTOM_USER_MENUS
 #endif
 
@@ -2532,20 +2532,18 @@
   #define USER_SCRIPT_RETURN  // Return to status screen after a script
   #define CUSTOM_USER_MENU_TITLE "Leveling Tools"
 
-  #define CommBedTmp "75"
-
   #define USER_DESC_1 "Setup"
-  #if (ENABLED(ABL_UBL))
-    #define USER_GCODE_1 "M190S" CommBedTmp"\nG28\nG34\nG29P1\nG29P3R\nG29S1\nG29S0\n G29F0.0\nG29A\nG28\nM109S215\nG1X150Y150\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
-  #elif ENABLED(ABL_BI)
-    #define USER_GCODE_1 "M190S" CommBedTmp"\nM104S215\nG34\nG28\nG29\nM400\nG28\nM420S1\nM109S215\nG1X100Y100\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
+  #if ENABLED(ABL_UBL)
+    #define USER_GCODE_1 "M190S75nG28\nG34\nG29P1\nG29P3R\nG29S1\nG29S0\n G29F0.0\nG29A\nG28\nM109S215\nG1X150Y150\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
+  #else
+    #define USER_GCODE_1 "M190S75\nM104S215\nG34\nG28\nG29\nM400\nG28\nM420S1\nM109S215\nG1X100Y100\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
   #endif
 
   #define USER_DESC_2 "PID Tune"
   #define USER_GCODE_2 "M106S128\nM303C8S215E0U\nM500\n M117 PID Tune Done"
 
   #define USER_DESC_3 "Prep for Z Adjust"
-  #define USER_GCODE_3 "M190 S" CommBedTmp" \n M104 S215 \n G28 \n G29 L1 \n G1 X100 Y 100 \n G1 Z0"
+  #define USER_GCODE_3 "M190 S75\n M104 S215 \n G28 \n G29 L1 \n G1 X100 Y 100 \n G1 Z0"
 
   #define USER_DESC_4 "Store Settings"
   #define USER_GCODE_4 "M500\nM117 Settings Stored"