diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 724696868a..fb3558dfe9 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -3327,6 +3327,9 @@
 
   #define USER_DESC_3 "Standard"
   #define USER_GCODE_3 "M92E814\nM907E750\nM500"
+
+  #define USER_DESC_4 "Mosquito BMG-M"
+  #define USER_GCODE_4 "M92E814\nM206X5Y15\nM907E750\nM500"
 #endif
 
 /**
diff --git a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
index 69a66420f8..1f3b80c02f 100644
--- a/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
+++ b/Marlin/src/feature/bedlevel/ubl/ubl_G29.cpp
@@ -1548,6 +1548,9 @@
          * numbers for those locations should be 0.
          */
         #ifdef VALIDATE_MESH_TILT
+          #if ENABLED(Z_SAFE_HOMING)
+            constexpr xy_float_t safe_homing_xy = { Z_SAFE_HOMING_X_POINT , Z_SAFE_HOMING_Y_POINT };
+          #endif
           auto d_from = []{ DEBUG_ECHOPGM("D from "); };
           auto normed = [&](const xy_pos_t &pos, const float &zadd) {
             return normal.x * pos.x + normal.y * pos.y + zadd;
diff --git a/Marlin/src/gcode/calibrate/G28.cpp b/Marlin/src/gcode/calibrate/G28.cpp
index 78695bc05b..121fc9604c 100644
--- a/Marlin/src/gcode/calibrate/G28.cpp
+++ b/Marlin/src/gcode/calibrate/G28.cpp
@@ -119,14 +119,14 @@
 
     // Disallow Z homing if X or Y homing is needed
     if (axis_unhomed_error(_BV(X_AXIS) | _BV(Y_AXIS))) return;
-
     sync_plan_position();
 
     /**
      * Move the Z probe (or just the nozzle) to the safe homing point
      * (Z is already at the right height)
      */
-    destination.set(safe_homing_xy, current_position.z);
+
+    destination.set((xy_float_t){ Z_SAFE_HOMING_X_POINT + home_offset[X_AXIS], Z_SAFE_HOMING_Y_POINT + home_offset[Y_AXIS] }, current_position.z);
 
     TERN_(HOMING_Z_WITH_PROBE, destination -= probe.offset_xy);
 
diff --git a/Marlin/src/gcode/geometry/M206_M428.cpp b/Marlin/src/gcode/geometry/M206_M428.cpp
index 2a007427a7..689651fd9d 100644
--- a/Marlin/src/gcode/geometry/M206_M428.cpp
+++ b/Marlin/src/gcode/geometry/M206_M428.cpp
@@ -41,6 +41,12 @@ void GcodeSuite::M206() {
     if (parser.seen(XYZ_CHAR(i)))
       set_home_offset((AxisEnum)i, parser.value_linear_units());
 
+    if (!parser.seen_any()) {
+      SERIAL_ECHOLNPAIR("M206X : ", home_offset[X_AXIS]);
+      SERIAL_ECHOLNPAIR("M206Y : ", home_offset[Y_AXIS]);
+      SERIAL_ECHOLNPAIR("M206Z : ", home_offset[Z_AXIS]);
+    }
+
   #if ENABLED(MORGAN_SCARA)
     if (parser.seen('T')) set_home_offset(A_AXIS, parser.value_float()); // Theta
     if (parser.seen('P')) set_home_offset(B_AXIS, parser.value_float()); // Psi
diff --git a/Marlin/src/module/motion.h b/Marlin/src/module/motion.h
index 38ce980dae..4400904d4b 100644
--- a/Marlin/src/module/motion.h
+++ b/Marlin/src/module/motion.h
@@ -78,10 +78,6 @@ extern xyz_pos_t cartes;
   #define XY_PROBE_FEEDRATE_MM_S PLANNER_XY_FEEDRATE()
 #endif
 
-#if ENABLED(Z_SAFE_HOMING)
-  constexpr xy_float_t safe_homing_xy = { Z_SAFE_HOMING_X_POINT, Z_SAFE_HOMING_Y_POINT };
-#endif
-
 /**
  * Feed rates are often configured with mm/m
  * but the planner and stepper like mm/s units.
diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp
index d44d6b50bd..baae1c0ba6 100644
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -2974,7 +2974,6 @@ void Stepper::report_positions() {
       if (!initialized) return;
 
       #if HAS_DIGIPOTSS
-        SERIAL_ECHOLNPAIR("Digipotss current ", current);
         const uint8_t digipot_ch[] = DIGIPOT_CHANNELS;
         digitalPotWrite(digipot_ch[driver], current);