From d53a65672f3aae437343c759fff441a7852e35dd Mon Sep 17 00:00:00 2001 From: InsanityAutomation Date: Tue, 20 Aug 2019 14:31:46 -0400 Subject: [PATCH] Matchup changes --- MKS_TFT_BLTouchBIL/mks_config.txt | 40 +++++++++++++------------- MKS_TFT_BLTouchUBL/mks_config.txt | 40 +++++++++++++------------- MKS_TFT_Stock_Mesh/mks_config.txt | 48 +++++++++++++++---------------- 3 files changed, 64 insertions(+), 64 deletions(-) diff --git a/MKS_TFT_BLTouchBIL/mks_config.txt b/MKS_TFT_BLTouchBIL/mks_config.txt index 40cc294470..d6151609cc 100644 --- a/MKS_TFT_BLTouchBIL/mks_config.txt +++ b/MKS_TFT_BLTouchBIL/mks_config.txt @@ -28,9 +28,9 @@ >cfg_max_hotbed_temperature:150 #pause position (-1 is invalid; Z-axis is relative position) ->cfg_XPOS:10 ->cfg_YPOS:10 ->cfg_ZADD:0 +>cfg_XPOS:-1 +>cfg_YPOS:-1 +>cfg_ZADD:10 #----------------------------------------------------------------------- ######### Advanced Function Option ################################## @@ -58,24 +58,24 @@ ######### Filament Change Function ############################## #the speed to extrude filament(mm/min) ->cfg_filament_load_speed:1200 +>cfg_filament_load_speed:400 #the lenght to extrude filament (mm) ->cfg_filament_load_length:200 +>cfg_filament_load_length:100 #the speed to retract filament(mm/min) ->cfg_filament_unload_speed:1200 +>cfg_filament_unload_speed:2000 #the lenght to retract filament(mm) ->cfg_filament_unload_length:200 +>cfg_filament_unload_length:100 #It is the minimum temperature for filament change. It will auto heat up if the current temp doesn't reach the target. >cfg_filament_load_limit_temperature:200 #The length of Load filament before unloader filament. ->cfg_unload_retract_length:2 +>cfg_unload_retract_length:5 #The speed of load filament before unloader filament. ->cfg_unload_retract_speed:1200 +>cfg_unload_retract_speed:500 #--------------------------------------------------------------------------- @@ -88,7 +88,7 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_auto_leveling_cmd:G28;G29; #the point number of manual leveling:(3,4,5 point available) ->cfg_point_number:4 +>cfg_point_number:5 #the coordinates of 5 point on manual leveling >cfg_point1:50,50 @@ -99,7 +99,7 @@ It will auto heat up if the current temp doesn't reach the target. #the travel speed of leveling(mm/min) >cfg_leveling_z_speed:1500 ->cfg_leveling_xy_speed:3000 +>cfg_leveling_xy_speed:5000 #--------------------------------------------------------------------------- @@ -109,14 +109,14 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_wifi_type:0 #wifi mode(0:sta;1:ap) ->cfg_wifi_mode:0 +>cfg_wifi_mode:1 #wifi name and password ->cfg_wifi_ap_name:MKS_wifi ->cfg_wifi_key_code:makerbase +>cfg_wifi_ap_name:Artillery +>cfg_wifi_key_code:12345678 #0:disable cloud service 1:enable cloud service ->cfg_cloud_enable:1 +>cfg_cloud_enable:0 #cloud service adress >cfg_wifi_cloud_host:www.baizhongyun.cn #cloud service port @@ -199,10 +199,10 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_printingstat_word_color:0xFFFFFF #3D effects setting (disable: 0; enable: 1) ->cfg_BUTTON_3D_effects:0 +>cfg_BUTTON_3D_effects:1 -#The screen is flipped 180°(0x00: no flip, 0xEE: flip) ->cfg_OVERTURN_180:0x00 +#The screen is flipped 180°(0: no flip, 1: flip) +>cfg_OVERTURN_180:0 #shield the function of detection power (0:no shield ,1:shield) >cfg_disable_PWR_det:0 @@ -215,9 +215,9 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_single_nozzle:0 #For the M110 command plus check, the version of Marlin 1.0.2 and below is set to 1, and the other versions are set to 0. ->cfg_M110_add_checkSum:1 +>cfg_M110_add_checkSum:0 #Enable function of display error message. (no:0; Yes:1） ->cfg_display_eeror_message:0 +>cfg_display_eeror_message:1 #----------------------------------------------------------------------- diff --git a/MKS_TFT_BLTouchUBL/mks_config.txt b/MKS_TFT_BLTouchUBL/mks_config.txt index 550b0fb5dc..2efec68374 100644 --- a/MKS_TFT_BLTouchUBL/mks_config.txt +++ b/MKS_TFT_BLTouchUBL/mks_config.txt @@ -28,9 +28,9 @@ >cfg_max_hotbed_temperature:150 #pause position (-1 is invalid; Z-axis is relative position) ->cfg_XPOS:10 ->cfg_YPOS:10 ->cfg_ZADD:0 +>cfg_XPOS:-1 +>cfg_YPOS:-1 +>cfg_ZADD:10 #----------------------------------------------------------------------- ######### Advanced Function Option ################################## @@ -58,24 +58,24 @@ ######### Filament Change Function ############################## #the speed to extrude filament(mm/min) ->cfg_filament_load_speed:1200 +>cfg_filament_load_speed:400 #the lenght to extrude filament (mm) ->cfg_filament_load_length:200 +>cfg_filament_load_length:100 #the speed to retract filament(mm/min) ->cfg_filament_unload_speed:1200 +>cfg_filament_unload_speed:2000 #the lenght to retract filament(mm) ->cfg_filament_unload_length:200 +>cfg_filament_unload_length:100 #It is the minimum temperature for filament change. It will auto heat up if the current temp doesn't reach the target. >cfg_filament_load_limit_temperature:200 #The length of Load filament before unloader filament. ->cfg_unload_retract_length:2 +>cfg_unload_retract_length:5 #The speed of load filament before unloader filament. ->cfg_unload_retract_speed:1200 +>cfg_unload_retract_speed:500 #--------------------------------------------------------------------------- @@ -88,7 +88,7 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_auto_leveling_cmd:G28;G29; #the point number of manual leveling:(3,4,5 point available) ->cfg_point_number:4 +>cfg_point_number:5 #the coordinates of 5 point on manual leveling >cfg_point1:50,50 @@ -99,7 +99,7 @@ It will auto heat up if the current temp doesn't reach the target. #the travel speed of leveling(mm/min) >cfg_leveling_z_speed:1500 ->cfg_leveling_xy_speed:3000 +>cfg_leveling_xy_speed:5000 #--------------------------------------------------------------------------- @@ -109,14 +109,14 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_wifi_type:0 #wifi mode(0:sta;1:ap) ->cfg_wifi_mode:0 +>cfg_wifi_mode:1 #wifi name and password ->cfg_wifi_ap_name:MKS_wifi ->cfg_wifi_key_code:makerbase +>cfg_wifi_ap_name:Artillery +>cfg_wifi_key_code:12345678 #0:disable cloud service 1:enable cloud service ->cfg_cloud_enable:1 +>cfg_cloud_enable:0 #cloud service adress >cfg_wifi_cloud_host:www.baizhongyun.cn #cloud service port @@ -199,10 +199,10 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_printingstat_word_color:0xFFFFFF #3D effects setting (disable: 0; enable: 1) ->cfg_BUTTON_3D_effects:0 +>cfg_BUTTON_3D_effects:1 -#The screen is flipped 180°(0x00: no flip, 0xEE: flip) ->cfg_OVERTURN_180:0x00 +#The screen is flipped 180°(0: no flip, 1: flip) +>cfg_OVERTURN_180:0 #shield the function of detection power (0:no shield ,1:shield) >cfg_disable_PWR_det:0 @@ -215,9 +215,9 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_single_nozzle:0 #For the M110 command plus check, the version of Marlin 1.0.2 and below is set to 1, and the other versions are set to 0. ->cfg_M110_add_checkSum:1 +>cfg_M110_add_checkSum:0 #Enable function of display error message. (no:0; Yes:1） ->cfg_display_eeror_message:0 +>cfg_display_eeror_message:1 #----------------------------------------------------------------------- diff --git a/MKS_TFT_Stock_Mesh/mks_config.txt b/MKS_TFT_Stock_Mesh/mks_config.txt index 18af5c6593..cbe572c975 100644 --- a/MKS_TFT_Stock_Mesh/mks_config.txt +++ b/MKS_TFT_Stock_Mesh/mks_config.txt @@ -28,9 +28,9 @@ >cfg_max_hotbed_temperature:150 #pause position (-1 is invalid; Z-axis is relative position) ->cfg_XPOS:10 ->cfg_YPOS:10 ->cfg_ZADD:0 +>cfg_XPOS:-1 +>cfg_YPOS:-1 +>cfg_ZADD:10 #----------------------------------------------------------------------- ######### Advanced Function Option ################################## @@ -58,24 +58,24 @@ ######### Filament Change Function ############################## #the speed to extrude filament(mm/min) ->cfg_filament_load_speed:1200 +>cfg_filament_load_speed:400 #the lenght to extrude filament (mm) ->cfg_filament_load_length:200 +>cfg_filament_load_length:100 #the speed to retract filament(mm/min) ->cfg_filament_unload_speed:1200 +>cfg_filament_unload_speed:2000 #the lenght to retract filament(mm) ->cfg_filament_unload_length:200 +>cfg_filament_unload_length:100 #It is the minimum temperature for filament change. It will auto heat up if the current temp doesn't reach the target. >cfg_filament_load_limit_temperature:200 #The length of Load filament before unloader filament. ->cfg_unload_retract_length:2 +>cfg_unload_retract_length:5 #The speed of load filament before unloader filament. ->cfg_unload_retract_speed:1200 +>cfg_unload_retract_speed:500 #--------------------------------------------------------------------------- @@ -88,7 +88,7 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_auto_leveling_cmd:G28;G29; #the point number of manual leveling:(3,4,5 point available) ->cfg_point_number:4 +>cfg_point_number:5 #the coordinates of 5 point on manual leveling >cfg_point1:50,50 @@ -99,7 +99,7 @@ It will auto heat up if the current temp doesn't reach the target. #the travel speed of leveling(mm/min) >cfg_leveling_z_speed:1500 ->cfg_leveling_xy_speed:3000 +>cfg_leveling_xy_speed:5000 #--------------------------------------------------------------------------- @@ -109,14 +109,14 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_wifi_type:0 #wifi mode(0:sta;1:ap) ->cfg_wifi_mode:0 +>cfg_wifi_mode:1 #wifi name and password ->cfg_wifi_ap_name:MKS_wifi ->cfg_wifi_key_code:makerbase +>cfg_wifi_ap_name:Artillery +>cfg_wifi_key_code:12345678 #0:disable cloud service 1:enable cloud service ->cfg_cloud_enable:1 +>cfg_cloud_enable:0 #cloud service adress >cfg_wifi_cloud_host:www.baizhongyun.cn #cloud service port @@ -148,17 +148,17 @@ It will auto heat up if the current temp doesn't reach the target. #edit command for 1~7 "More" button,each command must be separated by semicolon ";" >moreitem_button1_cmd:M502; M500; ->moreitem_button2_cmd:G29S1; +>moreitem_button2_cmd:G29 S1; >moreitem_button3_cmd:G91; G1 Z0.025; G90; >moreitem_button4_cmd:G91; G1 Z-0.025; G90; ->moreitem_button5_cmd:G29S2; M500; +>moreitem_button5_cmd:G29 S2; M500; ->moreitem_button6_cmd:M290Z0.025; M500; +>moreitem_button6_cmd:M290 Z0.025; M500; ->moreitem_button7_cmd:M290Z-0.025; M500; +>moreitem_button7_cmd:M290 Z-0.025; M500; #how many "More" button display on screen interface >morefunc_cnt:4 @@ -199,10 +199,10 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_printingstat_word_color:0xFFFFFF #3D effects setting (disable: 0; enable: 1) ->cfg_BUTTON_3D_effects:0 +>cfg_BUTTON_3D_effects:1 -#The screen is flipped 180°(0x00: no flip, 0xEE: flip) ->cfg_OVERTURN_180:0x00 +#The screen is flipped 180°(0: no flip, 1: flip) +>cfg_OVERTURN_180:0 #shield the function of detection power (0:no shield ,1:shield) >cfg_disable_PWR_det:0 @@ -215,9 +215,9 @@ It will auto heat up if the current temp doesn't reach the target. >cfg_single_nozzle:0 #For the M110 command plus check, the version of Marlin 1.0.2 and below is set to 1, and the other versions are set to 0. ->cfg_M110_add_checkSum:1 +>cfg_M110_add_checkSum:0 #Enable function of display error message. (no:0; Yes:1） ->cfg_display_eeror_message:0 +>cfg_display_eeror_message:1 #-----------------------------------------------------------------------