diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h index 7d0efcc303..fa0b02b0cb 100644 --- a/Marlin/Configuration.h +++ b/Marlin/Configuration.h @@ -74,49 +74,192 @@ // User-specified version info of this build to display in [Pronterface, etc] terminal window during // startup. Implementation of an idea by Prof Braino to inform user that any changes made to this // build by the user have been successfully uploaded into firmware. -#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes. +#define STRING_CONFIG_H_AUTHOR "TinyMachines3D" // Who made the changes. #define SHOW_BOOTSCREEN #define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1 #define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2 -/** - * *** VENDORS PLEASE READ *** - * - * Marlin allows you to add a custom boot image for Graphical LCDs. - * With this option Marlin will first show your custom screen followed - * by the standard Marlin logo with version number and web URL. - * - * We encourage you to take advantage of this new feature and we also - * respecfully request that you retain the unmodified Marlin boot screen. - */ - -// Enable to show the bitmap in Marlin/_Bootscreen.h on startup. -//#define SHOW_CUSTOM_BOOTSCREEN +// +// *** VENDORS PLEASE READ ***************************************************** +// +// Marlin now allow you to have a vendor boot image to be displayed on machine +// start. When SHOW_CUSTOM_BOOTSCREEN is defined Marlin will first show your +// custom boot image and then the default Marlin boot image is shown. +// +// We suggest for you to take advantage of this new feature and keep the Marlin +// boot image unmodified. For an example have a look at the bq Hephestos 2 +// example configuration folder. +// +#define SHOW_CUSTOM_BOOTSCREEN // Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen. -//#define CUSTOM_STATUS_SCREEN_IMAGE // @section machine +// Optional custom name for your RepStrap or other custom machine +// Displayed in the LCD "Ready" message + +/* + * Base machine + * Choose one option below to define machine size, board, and parameters + * + * + Choose this for CR10 Original Melzi Board + */ +//#define MachineCR10Orig + + +//#define MachineMini +#define MachineCR10S +//#define MachineS4 +//#define MachineS5 + +/* + * Hotend Type + * Choose one option below. + * E3D assumes the following mount : + * https://www.thingiverse.com/thing:2494642 + * + * Configured with 5015 left wing, right wing BLTouch only + */ +#define HotendStock +//#define HotendE3D + +/* + * Enable this if you have an all metal hotend capable of 300c + * + */ +#define HotendAllMetal + +/* + * Choose bed type below. If you have an extenrally controlled + * ac bed, leave both disabled + */ +//#define BedAC +#define BedDC + +/* + * If you have upgraded to an S board but kept the original display + * then enable this line + */ +//#define OrigLCD + +/* + * Choose ABL sensor type below + * Leave all disabled if no sensor is available + */ +//#define ABL_EZABL // TH3D EZABL or Any NO Sensor +//#define ABL_NCSW //Any NC Sensor +#define ABL_BLTOUCH + +/* + * Choose bed leveling type here + * Requires a sensor from above + * Melzi board users may only select ABL_BI for bilinear leveling + */ +//#define ABL_BI +#define ABL_UBL + +/* + * + * Choose a probe grid density below. Faster probes less points, but is less accurate. + * Extreme is for extremely uneven or tilted bed surfaces. + * UBL and Extreme are recommended with solid bed mounts as it becomes a one time commissioning. + * Standard is recommended in most other scenarios. + */ +//#define MeshFast +#define MeshStd +//#define MeshFine +//#define MeshExtreme + +//#define BoardRev2 + + +#if(!ENABLED(MachineCR10Orig)) +#define CUSTOM_STATUS_SCREEN_IMAGE +#endif + +#if(ENABLED(MachineMini)) +#define CUSTOM_MACHINE_NAME "Mini SuPeR" +#elif(ENABLED(MachineCR10Orig)) +#define CUSTOM_MACHINE_NAME "SuPeR CR-10" +#elif(ENABLED(MachineCR10S)) +#define CUSTOM_MACHINE_NAME "300 SuPeR" +#elif(ENABLED(MachineS4)) +#define CUSTOM_MACHINE_NAME "400 SuPeR" +#elif(ENABLED(MachineS5)) +#define CUSTOM_MACHINE_NAME "500 SuPeR" +#endif + +#if(ENABLED(MachineMini)) +#define VerChar1 "M" +#elif(ENABLED(MachineCR10Orig)) +#define VerChar1 "O" +#elif(ENABLED(MachineCR10S)) +#define VerChar1 "S" +#elif(ENABLED(MachineS4)) +#define VerChar1 "4" +#elif(ENABLED(MachineS5)) +#define VerChar1 "5" +#endif + +#if(ENABLED(HotendStock)) +#define VerChar2 "S" +#elif(ENABLED(HotendE3D)) +#define VerChar2 "E" +#endif + +#if(ENABLED(HotendAllMetal)) +#define VerChar3 "M" +#else +#define VerChar3 "S" +#endif + + +#if(ENABLED(BedAC)) +#define VerChar4 "A" +#elif(ENABLED(BedDC)) +#define VerChar4 "D" +#else +#define VerChar4 "N" +#endif + +#if(ENABLED(ABL_EZABL)) +#define VerChar5 "A" +#elif(ENABLED(ABL_BLTOUCH)) +#define VerChar5 "B" +#else +#define VerChar5 "N" +#endif + +#if(ENABLED(ABL_UBL)) +#define VerChar6 "U" +#elif(ENABLED(ABL_BI)) +#define VerChar6 "B" +#else +#define VerChar6 "N" +#endif + +#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D " VerChar1 VerChar2 VerChar3 VerChar4 VerChar5 VerChar6 /** - * Select the serial port on the board to use for communication with the host. - * This allows the connection of wireless adapters (for instance) to non-default port pins. - * Serial port 0 is always used by the Arduino bootloader regardless of this setting. - * - * :[0, 1, 2, 3, 4, 5, 6, 7] - */ + Select the serial port on the board to use for communication with the host. + This allows the connection of wireless adapters (for instance) to non-default port pins. + Serial port 0 is always used by the Arduino bootloader regardless of this setting. + + :[0, 1, 2, 3, 4, 5, 6, 7] +*/ #define SERIAL_PORT 0 /** - * This setting determines the communication speed of the printer. - * - * 250000 works in most cases, but you might try a lower speed if - * you commonly experience drop-outs during host printing. - * You may try up to 1000000 to speed up SD file transfer. - * - * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] - */ -#define BAUDRATE 250000 + This setting determines the communication speed of the printer. + + 250000 works in most cases, but you might try a lower speed if + you commonly experience drop-outs during host printing. + You may try up to 1000000 to speed up SD file transfer. + + :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] +*/ +#define BAUDRATE 115200 // Enable the Bluetooth serial interface on AT90USB devices //#define BLUETOOTH @@ -124,7 +267,11 @@ // The following define selects which electronics board you have. // Please choose the name from boards.h that matches your setup #ifndef MOTHERBOARD - #define MOTHERBOARD BOARD_RAMPS_14_EFB +#if(ENABLED(MachineCR10Orig)) +#define MOTHERBOARD BOARD_MELZI_CREALITY +#else +#define MOTHERBOARD BOARD_RAMPS_14_EFB +#endif #endif // Optional custom name for your RepStrap or other custom machine @@ -142,7 +289,7 @@ #define EXTRUDERS 1 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc. -#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0 +#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75 // For Cyclops or any "multi-extruder" that shares a single nozzle. //#define SINGLENOZZLE @@ -302,14 +449,26 @@ * * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" } */ + +#if ENABLED(HotendStock) #define TEMP_SENSOR_0 1 +#endif +#if ENABLED(HotendE3D) +#define TEMP_SENSOR_0 5 +#endif #define TEMP_SENSOR_1 0 #define TEMP_SENSOR_2 0 #define TEMP_SENSOR_3 0 #define TEMP_SENSOR_4 0 #define TEMP_SENSOR_BED 0 -#define TEMP_SENSOR_CHAMBER 0 +#if ENABLED(BedDC) +#define TEMP_SENSOR_BED 5 +#endif +#if ENABLED(BedAC) +#define TEMP_SENSOR_BED 11 +#endif +#define TEMP_SENSOR_CHAMBER 0 // Dummy thermistor constant temperature readings, for use with 998 and 999 #define DUMMY_THERMISTOR_998_VALUE 25 #define DUMMY_THERMISTOR_999_VALUE 100 @@ -342,12 +501,16 @@ // When temperature exceeds max temp, your heater will be switched off. // This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure! // You should use MINTEMP for thermistor short/failure protection. -#define HEATER_0_MAXTEMP 275 +#if (ENABLED(HotendAllMetal)) +#define HEATER_0_MAXTEMP 295 +#else +#define HEATER_0_MAXTEMP 250 +#endif #define HEATER_1_MAXTEMP 275 #define HEATER_2_MAXTEMP 275 #define HEATER_3_MAXTEMP 275 #define HEATER_4_MAXTEMP 275 -#define BED_MAXTEMP 150 +#define BED_MAXTEMP 135 //=========================================================================== //============================= PID Settings ================================ @@ -360,31 +523,49 @@ #define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current #define PID_K1 0.95 // Smoothing factor within any PID loop #if ENABLED(PIDTEMP) - //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. - //#define PID_DEBUG // Sends debug data to the serial port. - //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX - //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay - //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) - // Set/get with gcode: M301 E[extruder number, 0-2] - #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature - // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. +#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result. +//#define PID_DEBUG // Sends debug data to the serial port. +//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX +//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay +//#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders) +// Set/get with gcode: M301 E[extruder number, 0-2] +#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature +// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max. - // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it +// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it +// Stock CR-10 Hotend fan 100% +// #define DEFAULT_Kp 17.42 +// #define DEFAULT_Ki 1.27 +// #define DEFAULT_Kd 59.93 +#if ENABLED(HotendStock) - // Ultimaker - #define DEFAULT_Kp 22.2 - #define DEFAULT_Ki 1.08 - #define DEFAULT_Kd 114 +// Stock CR-10 Hotend fan 100% +#define DEFAULT_Kp 17.42 +#define DEFAULT_Ki 1.27 +#define DEFAULT_Kd 59.93 +#endif - // MakerGear - //#define DEFAULT_Kp 7.0 - //#define DEFAULT_Ki 0.1 - //#define DEFAULT_Kd 12 +#if ENABLED(HotendE3D) +//E3D v6 Clone with 5050 fan wing at 100% set to 235 +#define DEFAULT_Kp 23.36 +#define DEFAULT_Ki 1.99 +#define DEFAULT_Kd 87.46 +#endif - // Mendel Parts V9 on 12V - //#define DEFAULT_Kp 63.0 - //#define DEFAULT_Ki 2.25 - //#define DEFAULT_Kd 440 +// Ultimaker +//#define DEFAULT_Kp 22.2 +//#define DEFAULT_Ki 1.08 +//#define DEFAULT_Kd 114 + +// MakerGear +//#define DEFAULT_Kp 7.0 +//#define DEFAULT_Ki 0.1 +//#define DEFAULT_Kd 12 + +// Mendel Parts V9 on 12V +//#define DEFAULT_Kp 63.0 +//#define DEFAULT_Ki 2.25 +//#define DEFAULT_Kd 440 #endif // PIDTEMP @@ -405,7 +586,7 @@ * heater. If your configuration is significantly different than this and you don't understand * the issues involved, don't use bed PID until someone else verifies that your hardware works. */ -//#define PIDTEMPBED +#define PIDTEMPBED //#define BED_LIMIT_SWITCHING @@ -419,21 +600,24 @@ #if ENABLED(PIDTEMPBED) - //#define PID_BED_DEBUG // Sends debug data to the serial port. +//#define PID_BED_DEBUG // Sends debug data to the serial port. +//Stock Bed Tuned for 50C +#define DEFAULT_bedKp 690.34 +#define DEFAULT_bedKi 111.47 +#define DEFAULT_bedKd 1068.83 +//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) +//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) +//#define DEFAULT_bedKp 10.00 +//#define DEFAULT_bedKi .023 +//#define DEFAULT_bedKd 305.4 - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10) - #define DEFAULT_bedKp 10.00 - #define DEFAULT_bedKi .023 - #define DEFAULT_bedKd 305.4 +//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) +//from pidautotune +//#define DEFAULT_bedKp 97.1 +//#define DEFAULT_bedKi 1.41 +//#define DEFAULT_bedKd 1675.16 - //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+) - //from pidautotune - //#define DEFAULT_bedKp 97.1 - //#define DEFAULT_bedKi 1.41 - //#define DEFAULT_bedKd 1675.16 - - // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. +// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles. #endif // PIDTEMPBED // @section extruder @@ -443,12 +627,12 @@ // or to allow moving the extruder regardless of the hotend temperature. // *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! *** #define PREVENT_COLD_EXTRUSION -#define EXTRUDE_MINTEMP 170 +#define EXTRUDE_MINTEMP 160 // This option prevents a single extrusion longer than EXTRUDE_MAXLENGTH. // Note that for Bowden Extruders a too-small value here may prevent loading. #define PREVENT_LENGTHY_EXTRUDE -#define EXTRUDE_MAXLENGTH 200 +#define EXTRUDE_MAXLENGTH 500 //=========================================================================== //======================== Thermal Runaway Protection ======================= @@ -514,15 +698,24 @@ //#define ENDSTOPPULLUP_ZMIN_PROBE #endif + // Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup). #define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. #define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. -#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#if (!ENABLED(ABL_EZABL)&& !ENABLED(ABL_BLTOUCH)) +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#elif (ENABLED(ABL_NCSW)) +#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe. +#else +#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop. +#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe. +#endif // Enable this feature if all enabled endstop pins are interrupt-capable. // This will remove the need to poll the interrupt pins, saving many CPU cycles. //#define ENDSTOP_INTERRUPTS_FEATURE @@ -552,47 +745,79 @@ * Override with M92 * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] */ -#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 } +#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 95 } /** - * Default Max Feed Rate (mm/s) - * Override with M203 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] - */ -#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 } - -/** - * Default Max Acceleration (change/s) change = mm/s - * (Maximum start speed for accelerated moves) - * Override with M201 - * X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] - */ -#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 } - -/** - * Default Acceleration (change/s) change = mm/s - * Override with M204 - * - * M204 P Acceleration - * M204 R Retract Acceleration - * M204 T Travel Acceleration - */ -#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves -#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts -#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves - -/** - * Default Jerk (mm/s) - * Override with M205 X Y Z E - * - * "Jerk" specifies the minimum speed change that requires acceleration. - * When changing speed and direction, if the difference is less than the - * value set here, it may happen instantaneously. - */ -#define DEFAULT_XJERK 10.0 -#define DEFAULT_YJERK 10.0 -#define DEFAULT_ZJERK 0.3 + Default Max Feed Rate (mm/s) + Override with M203 + X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] +*/ +#if ENABLED(MachineMini) +#define DEFAULT_MAX_FEEDRATE { 750, 750, 10, 25 } +#define DEFAULT_MAX_ACCELERATION { 2000, 2000, 100, 25 } +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 #define DEFAULT_EJERK 5.0 +#endif + +#if (ENABLED(MachineCR10S) || ENABLED(MachineCR10Orig)) +#define DEFAULT_MAX_FEEDRATE { 500, 500, 10, 25 } +#define DEFAULT_MAX_ACCELERATION { 1500, 1500, 100, 25 } +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 20.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 +#endif + +#if ENABLED( MachineS4) +#define DEFAULT_MAX_FEEDRATE { 500, 400, 10, 25 } +#define DEFAULT_MAX_ACCELERATION { 1000, 750, 100, 25 } +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 10.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 +#endif +#if ENABLED(MachineS5) +#define DEFAULT_MAX_FEEDRATE { 300, 300, 10, 25 } +#define DEFAULT_MAX_ACCELERATION { 1000, 500, 100, 25 } +#define DEFAULT_ACCELERATION 300 // X, Y, Z and E acceleration for printing moves +#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts +#define DEFAULT_TRAVEL_ACCELERATION 300 // X, Y, Z acceleration for travel (non printing) moves +#define DEFAULT_XJERK 20.0 +#define DEFAULT_YJERK 5.0 +#define DEFAULT_ZJERK 0.4 +#define DEFAULT_EJERK 5.0 +#endif + + +/** + Default Max Acceleration (change/s) change = mm/s + (Maximum start speed for accelerated moves) + Override with M201 + X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]] +*/ +/** + Default Acceleration (change/s) change = mm/s + Override with M204 + + M204 P Acceleration + M204 R Retract Acceleration + M204 T Travel Acceleration +*/ +/** + Default Jerk (mm/s) + Override with M205 X Y Z E + /** * Realtime Jerk Control @@ -605,6 +830,12 @@ */ //#define BEZIER_JERK_CONTROL +/** + "Jerk" specifies the minimum speed change that requires acceleration. + When changing speed and direction, if the difference is less than the + value set here, it may happen instantaneously. +*/ + //=========================================================================== //============================= Z Probe Options ============================= //=========================================================================== @@ -615,10 +846,10 @@ // /** - * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN - * - * Enable this option for a probe connected to the Z Min endstop pin. - */ + Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN + + Enable this option for a probe connected to the Z Min endstop pin. +*/ #define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN /** @@ -650,49 +881,64 @@ */ /** - * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. - * Use G29 repeatedly, adjusting the Z height at each point with movement commands - * or (with LCD_BED_LEVELING) the LCD controller. - */ -//#define PROBE_MANUALLY - + The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe. + Use G29 repeatedly, adjusting the Z height at each point with movement commands + or (with LCD_BED_LEVELING) the LCD controller. +*/ +#if (!ENABLED(ABL_EZABL)&& !ENABLED(ABL_BLTOUCH)) +#define PROBE_MANUALLY +#endif /** - * A Fix-Mounted Probe either doesn't deploy or needs manual deployment. - * (e.g., an inductive probe or a nozzle-based probe-switch.) - */ -//#define FIX_MOUNTED_PROBE - + A Fix-Mounted Probe either doesn't deploy or needs manual deployment. + (e.g., an inductive probe or a nozzle-based probe-switch.) +*/ +#if ENABLED(ABL_EZABL) +#define FIX_MOUNTED_PROBE +#endif /** - * Z Servo Probe, such as an endstop switch on a rotating arm. - */ -//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector. + Z Servo Probe, such as an endstop switch on a rotating arm. +*/ +//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector. //#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles /** - * The BLTouch probe uses a Hall effect sensor and emulates a servo. - */ -//#define BLTOUCH + The BLTouch probe uses a Hall effect sensor and emulates a servo. +*/ +#if ENABLED(ABL_BLTOUCH) +#define BLTOUCH +#endif #if ENABLED(BLTOUCH) - //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed +#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed #endif /** - * Enable one or more of the following if probing seems unreliable. - * Heaters and/or fans can be disabled during probing to minimize electrical - * noise. A delay can also be added to allow noise and vibration to settle. - * These options are most useful for the BLTouch probe, but may also improve - * readings with inductive probes and piezo sensors. - */ -//#define PROBING_HEATERS_OFF // Turn heaters off when probing + + Enable one or more of the following if probing seems unreliable. + Heaters and/or fans can be disabled during probing to minimize electrical + noise. A delay can also be added to allow noise and vibration to settle. + These options are most useful for the BLTouch probe, but may also improve + readings with inductive probes and piezo sensors. +*/ +#if (ENABLED(ABL_EZABL) && ENABLED(BED_AC)) +#define PROBING_HEATERS_OFF // Turn heaters off when probing +#endif + #if ENABLED(PROBING_HEATERS_OFF) - //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) + #define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy) #endif //#define PROBING_FANS_OFF // Turn fans off when probing + //#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN) -//#define SOLENOID_PROBE - +#if ENABLED(ABL_BLTOUCH) +#define PROBING_FANS_OFF // Turn fans off when probing +#if(ENABLED(MachineCR10Orig)) +#define SOLENOID_PROBE PIN_27 +#else +#define SOLENOID_PROBE PIN_11 +#endif +#endif // A sled-mounted probe like those designed by Charles Bell. //#define Z_PROBE_SLED //#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like. @@ -702,31 +948,47 @@ // /** - * Z Probe to nozzle (X,Y) offset, relative to (0, 0). - * X and Y offsets must be integers. - * - * In the following example the X and Y offsets are both positive: - * #define X_PROBE_OFFSET_FROM_EXTRUDER 10 - * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 - * - * +-- BACK ---+ - * | | - * L | (+) P | R <-- probe (20,20) - * E | | I - * F | (-) N (+) | G <-- nozzle (10,10) - * T | | H - * | (-) | T - * | | - * O-- FRONT --+ - * (0,0) - */ -#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle] -#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle] + Z Probe to nozzle (X,Y) offset, relative to (0, 0). + X and Y offsets must be integers. + + In the following example the X and Y offsets are both positive: + #define X_PROBE_OFFSET_FROM_EXTRUDER 10 + #define Y_PROBE_OFFSET_FROM_EXTRUDER 10 + + +-- BACK ---+ + | | + L | (+) P | R <-- probe (20,20) + E | | I + F | (-) N (+) | G <-- nozzle (10,10) + T | | H + | (-) | T + | | + O-- FRONT --+ + (0,0) +*/ +#if (ENABLED(ABL_BLTOUCH) && ENABLED(HotendStock)) +#define X_PROBE_OFFSET_FROM_EXTRUDER -41 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -8 // Y offset: -front +behind [the nozzle] #define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#endif -// Certain types of probes need to stay away from edges -#define MIN_PROBE_EDGE 10 +#if (ENABLED(ABL_EZABL) && ENABLED(HotendStock)) +#define X_PROBE_OFFSET_FROM_EXTRUDER -44 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER -10 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#endif +#if (ENABLED(ABL_BLTOUCH) && ENABLED(HotendE3D)) +#define X_PROBE_OFFSET_FROM_EXTRUDER 33 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#endif + +#if (ENABLED(ABL_EZABL) && ENABLED(HotendE3D)) +#define X_PROBE_OFFSET_FROM_EXTRUDER 33 // X offset: -left +right [of the nozzle] +#define Y_PROBE_OFFSET_FROM_EXTRUDER 5 // Y offset: -front +behind [the nozzle] +#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle] +#endif // X and Y axis travel speed (mm/m) between probes #define XY_PROBE_SPEED 8000 @@ -739,35 +1001,38 @@ // The number of probes to perform at each point. // Set to 2 for a fast/slow probe, using the second probe result. // Set to 3 or more for slow probes, averaging the results. -//#define MULTIPLE_PROBING 2 +#define MULTIPLE_PROBING 2 /** - * Z probes require clearance when deploying, stowing, and moving between - * probe points to avoid hitting the bed and other hardware. - * Servo-mounted probes require extra space for the arm to rotate. - * Inductive probes need space to keep from triggering early. - * - * Use these settings to specify the distance (mm) to raise the probe (or - * lower the bed). The values set here apply over and above any (negative) - * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. - * Only integer values >= 1 are valid here. - * - * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. - * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. - */ + Z probes require clearance when deploying, stowing, and moving between + probe points to avoid hitting the bed and other hardware. + Servo-mounted probes require extra space for the arm to rotate. + Inductive probes need space to keep from triggering early. + + Use these settings to specify the distance (mm) to raise the probe (or + lower the bed). The values set here apply over and above any (negative) + probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD. + Only integer values >= 1 are valid here. + + Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle. + But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle. +*/ #define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow #define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points -//#define Z_AFTER_PROBING 5 // Z position after probing is done +#define Z_AFTER_PROBING 5 // Z position after probing is done -#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping +#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping // For M851 give a range for adjusting the Z probe offset #define Z_PROBE_OFFSET_RANGE_MIN -20 #define Z_PROBE_OFFSET_RANGE_MAX 20 // Enable the M48 repeatability test to test probe accuracy -//#define Z_MIN_PROBE_REPEATABILITY_TEST - +#if (ENABLED(ABL_EZABL)|| ENABLED(ABL_BLTOUCH)) +#if(!ENABLED(MachineCR10Orig)) +#define Z_MIN_PROBE_REPEATABILITY_TEST +#endif +#endif // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1 // :{ 0:'Low', 1:'High' } #define X_ENABLE_ON 0 @@ -790,18 +1055,25 @@ // @section machine +#if(ENABLED(MachineCR10Orig)) // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way. -#define INVERT_X_DIR false +#define INVERT_X_DIR true #define INVERT_Y_DIR true #define INVERT_Z_DIR false - +#define INVERT_E0_DIR true +#else +#define INVERT_X_DIR false +#define INVERT_Y_DIR false +#define INVERT_Z_DIR true +#define INVERT_E0_DIR false +#endif // Enable this option for Toshiba stepper drivers //#define CONFIG_STEPPERS_TOSHIBA // @section extruder // For direct drive extruder v9 set to true, for geared extruder set to false. -#define INVERT_E0_DIR false + #define INVERT_E1_DIR false #define INVERT_E2_DIR false #define INVERT_E3_DIR false @@ -810,11 +1082,10 @@ // @section homing //#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed - //#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off. -//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... - // Be sure you have this distance over your Z_MAX_POS in case. +#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ... +// Be sure you have this distance over your Z_MAX_POS in case. // Direction of endstops when homing; 1=MAX, -1=MIN // :[-1,1] @@ -824,9 +1095,29 @@ // @section machine +#if ENABLED(MachineMini) +#define X_BED_SIZE 300 +#define Y_BED_SIZE 220 +#define Z_MAX_POS 300 +#endif + +#if (ENABLED(MachineCR10S)) +#define X_BED_SIZE 315 +#define Y_BED_SIZE 310 +#define Z_MAX_POS 400 +#endif + +#if ENABLED( MachineS4) +#define X_BED_SIZE 400 +#define Y_BED_SIZE 400 +#define Z_MAX_POS 400 +#endif +#if ENABLED(MachineS5) +#define X_BED_SIZE 500 +#define Y_BED_SIZE 500 +#define Z_MAX_POS 500 +#endif // The size of the print bed -#define X_BED_SIZE 200 -#define Y_BED_SIZE 200 // Travel limits (mm) after homing, corresponding to endstop positions. #define X_MIN_POS 0 @@ -834,51 +1125,52 @@ #define Z_MIN_POS 0 #define X_MAX_POS X_BED_SIZE #define Y_MAX_POS Y_BED_SIZE -#define Z_MAX_POS 200 /** - * Software Endstops - * - * - Prevent moves outside the set machine bounds. - * - Individual axes can be disabled, if desired. - * - X and Y only apply to Cartesian robots. - * - Use 'M211' to set software endstops on/off or report current state - */ + Software Endstops + + - Prevent moves outside the set machine bounds. + - Individual axes can be disabled, if desired. + - X and Y only apply to Cartesian robots. + - Use 'M211' to set software endstops on/off or report current state +*/ // Min software endstops constrain movement within minimum coordinate bounds #define MIN_SOFTWARE_ENDSTOPS #if ENABLED(MIN_SOFTWARE_ENDSTOPS) - #define MIN_SOFTWARE_ENDSTOP_X - #define MIN_SOFTWARE_ENDSTOP_Y - #define MIN_SOFTWARE_ENDSTOP_Z +#define MIN_SOFTWARE_ENDSTOP_X +#define MIN_SOFTWARE_ENDSTOP_Y +#define MIN_SOFTWARE_ENDSTOP_Z #endif // Max software endstops constrain movement within maximum coordinate bounds #define MAX_SOFTWARE_ENDSTOPS #if ENABLED(MAX_SOFTWARE_ENDSTOPS) - #define MAX_SOFTWARE_ENDSTOP_X - #define MAX_SOFTWARE_ENDSTOP_Y - #define MAX_SOFTWARE_ENDSTOP_Z +#define MAX_SOFTWARE_ENDSTOP_X +#define MAX_SOFTWARE_ENDSTOP_Y +#define MAX_SOFTWARE_ENDSTOP_Z #endif #if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS) - //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD + #define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD #endif - /** - * Filament Runout Sensors - * Mechanical or opto endstops are used to check for the presence of filament. - * - * RAMPS-based boards use SERVO3_PIN for the first runout sensor. - * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. - * By default the firmware assumes HIGH=FILAMENT PRESENT. - */ -//#define FILAMENT_RUNOUT_SENSOR + Filament Runout Sensors + Mechanical or opto endstops are used to check for the presence of filament. + + RAMPS-based boards use SERVO3_PIN for the first runout sensor. + For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc. + By default the firmware assumes HIGH=FILAMENT PRESENT. +*/ +#if(!ENABLED(MachineCR10Orig)) +#define FILAMENT_RUNOUT_SENSOR +#endif #if ENABLED(FILAMENT_RUNOUT_SENSOR) - #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. - #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor. - #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. - #define FILAMENT_RUNOUT_SCRIPT "M600" +#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each. +#define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor. +#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins. +#define FILAMENT_RUNOUT_SCRIPT "M600" +#define FIL_RUNOUT_PIN 2 // Creality CR10-S stock sensor #endif //=========================================================================== @@ -887,173 +1179,251 @@ // @section calibrate /** - * Choose one of the options below to enable G29 Bed Leveling. The parameters - * and behavior of G29 will change depending on your selection. - * - * If using a Probe for Z Homing, enable Z_SAFE_HOMING also! - * - * - AUTO_BED_LEVELING_3POINT - * Probe 3 arbitrary points on the bed (that aren't collinear) - * You specify the XY coordinates of all 3 points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_LINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a single tilted plane. Best for a flat bed. - * - * - AUTO_BED_LEVELING_BILINEAR - * Probe several points in a grid. - * You specify the rectangle and the density of sample points. - * The result is a mesh, best for large or uneven beds. - * - * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) - * A comprehensive bed leveling system combining the features and benefits - * of other systems. UBL also includes integrated Mesh Generation, Mesh - * Validation and Mesh Editing systems. - * - * - MESH_BED_LEVELING - * Probe a grid manually - * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) - * For machines without a probe, Mesh Bed Leveling provides a method to perform - * leveling in steps so you can manually adjust the Z height at each grid-point. - * With an LCD controller the process is guided step-by-step. - */ + Choose one of the options below to enable G29 Bed Leveling. The parameters + and behavior of G29 will change depending on your selection. + + If using a Probe for Z Homing, enable Z_SAFE_HOMING also! + + - AUTO_BED_LEVELING_3POINT + Probe 3 arbitrary points on the bed (that aren't collinear) + You specify the XY coordinates of all 3 points. + The result is a single tilted plane. Best for a flat bed. + + - AUTO_BED_LEVELING_LINEAR + Probe several points in a grid. + You specify the rectangle and the density of sample points. + The result is a single tilted plane. Best for a flat bed. + + - AUTO_BED_LEVELING_BILINEAR + Probe several points in a grid. + You specify the rectangle and the density of sample points. + The result is a mesh, best for large or uneven beds. + + - AUTO_BED_LEVELING_UBL (Unified Bed Leveling) + A comprehensive bed leveling system combining the features and benefits + of other systems. UBL also includes integrated Mesh Generation, Mesh + Validation and Mesh Editing systems. + + - MESH_BED_LEVELING + Probe a grid manually + The result is a mesh, suitable for large or uneven beds. (See BILINEAR.) + For machines without a probe, Mesh Bed Leveling provides a method to perform + leveling in steps so you can manually adjust the Z height at each grid-point. + With an LCD controller the process is guided step-by-step. +*/ //#define AUTO_BED_LEVELING_3POINT //#define AUTO_BED_LEVELING_LINEAR -//#define AUTO_BED_LEVELING_BILINEAR -//#define AUTO_BED_LEVELING_UBL -//#define MESH_BED_LEVELING + +#if (ENABLED(ABL_EZABL)|| ENABLED(ABL_BLTOUCH)) +#if ((ENABLED(ABL_UBL))) +#define AUTO_BED_LEVELING_UBL +#endif +#if ((ENABLED(ABL_BI))) +#define AUTO_BED_LEVELING_BILINEAR +#endif +#else +#define MESH_BED_LEVELING +#endif + /** - * Normally G28 leaves leveling disabled on completion. Enable - * this option to have G28 restore the prior leveling state. - */ -//#define RESTORE_LEVELING_AFTER_G28 - -/** - * Enable detailed logging of G28, G29, M48, etc. - * Turn on with the command 'M111 S32'. - * NOTE: Requires a lot of PROGMEM! - */ + Enable detailed logging of G28, G29, M48, etc. + Turn on with the command 'M111 S32'. + NOTE: Requires a lot of PROGMEM! +*/ //#define DEBUG_LEVELING_FEATURE #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL) - // Gradually reduce leveling correction until a set height is reached, - // at which point movement will be level to the machine's XY plane. - // The height can be set with M420 Z - #define ENABLE_LEVELING_FADE_HEIGHT +// Gradually reduce leveling correction until a set height is reached, +// at which point movement will be level to the machine's XY plane. +// The height can be set with M420 Z +#define ENABLE_LEVELING_FADE_HEIGHT - // For Cartesian machines, instead of dividing moves on mesh boundaries, - // split up moves into short segments like a Delta. This follows the - // contours of the bed more closely than edge-to-edge straight moves. - #define SEGMENT_LEVELED_MOVES - #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) +// For Cartesian machines, instead of dividing moves on mesh boundaries, +// split up moves into short segments like a Delta. This follows the +// contours of the bed more closely than edge-to-edge straight moves. +#define SEGMENT_LEVELED_MOVES +#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one) - /** - * Enable the G26 Mesh Validation Pattern tool. - */ - //#define G26_MESH_VALIDATION - #if ENABLED(G26_MESH_VALIDATION) - #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. - #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. - #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. - #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. - #endif +/** + Enable the G26 Mesh Validation Pattern tool. +*/ +#if(!ENABLED(MachineCR10Orig)) +#define G26_MESH_VALIDATION // Enable G26 mesh validation +#endif +#if ENABLED(G26_MESH_VALIDATION) +#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle. +#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool. +#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool. +#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool. +#endif #endif +#if ENABLED(MeshFast) +#define GRID_MAX_POINTS_X 3 +#elif (ENABLED(MeshStd) ) +#define GRID_MAX_POINTS_X 5 +#elif ENABLED( MeshFine) +#define GRID_MAX_POINTS_X 8 +#elif ENABLED(MeshExtreme) +#define GRID_MAX_POINTS_X 15 +#else + GRID_MAX_POINTS_X 3 +#endif #if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR) - // Set the number of grid points per dimension. - #define GRID_MAX_POINTS_X 3 - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - // Set the boundaries for probing (where the probe can reach). - //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE) - //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE - //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE) - // Probe along the Y axis, advancing X after each column - //#define PROBE_Y_FIRST +// Set the number of grid points per dimension. +#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - #if ENABLED(AUTO_BED_LEVELING_BILINEAR) +// The Z probe minimum outer margin (to validate G29 parameters). +#define MIN_PROBE_EDGE 10 - // Beyond the probed grid, continue the implied tilt? - // Default is to maintain the height of the nearest edge. - //#define EXTRAPOLATE_BEYOND_GRID +// Set the boundaries for probing (where the probe can reach). +#if( (X_PROBE_OFFSET_FROM_EXTRUDER + 15) > 0 ) +#define LEFT_PROBE_BED_POSITION (X_PROBE_OFFSET_FROM_EXTRUDER + 5) +#else +#define LEFT_PROBE_BED_POSITION 10 +#endif - // - // Experimental Subdivision of the grid by Catmull-Rom method. - // Synthesizes intermediate points to produce a more detailed mesh. - // - //#define ABL_BILINEAR_SUBDIVISION - #if ENABLED(ABL_BILINEAR_SUBDIVISION) - // Number of subdivisions between probe points - #define BILINEAR_SUBDIVISIONS 3 - #endif +#if( (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 10) < X_BED_SIZE) +#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 5) +#else +#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - 10) +#endif - #endif +#if ( (Y_PROBE_OFFSET_FROM_EXTRUDER + 25) > 10 ) +#define FRONT_PROBE_BED_POSITION (Y_PROBE_OFFSET_FROM_EXTRUDER + 25) +#else +#define FRONT_PROBE_BED_POSITION 25 +#endif + +#if( (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) < Y_BED_SIZE) +#define BACK_PROBE_BED_POSITION (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) +#else +#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - 25) +#endif + +// Probe along the Y axis, advancing X after each column +//#define PROBE_Y_FIRST + +#if ENABLED(AUTO_BED_LEVELING_BILINEAR) + +// Beyond the probed grid, continue the implied tilt? +// Default is to maintain the height of the nearest edge. +//#define EXTRAPOLATE_BEYOND_GRID + +// +// Experimental Subdivision of the grid by Catmull-Rom method. +// Synthesizes intermediate points to produce a more detailed mesh. +// +//#define ABL_BILINEAR_SUBDIVISION +#if ENABLED(ABL_BILINEAR_SUBDIVISION) +// Number of subdivisions between probe points +#define BILINEAR_SUBDIVISIONS 3 +#endif + +#endif + +#elif ENABLED(AUTO_BED_LEVELING_3POINT) + +// 3 arbitrary points to probe. +// A simple cross-product is used to estimate the plane of the bed. +#define ABL_PROBE_PT_1_X 15 +#define ABL_PROBE_PT_1_Y 180 +#define ABL_PROBE_PT_2_X 15 +#define ABL_PROBE_PT_2_Y 20 +#define ABL_PROBE_PT_3_X 170 +#define ABL_PROBE_PT_3_Y 20 #elif ENABLED(AUTO_BED_LEVELING_UBL) - //=========================================================================== - //========================= Unified Bed Leveling ============================ - //=========================================================================== +//=========================================================================== +//========================= Unified Bed Leveling ============================ +//=========================================================================== - //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh +#if(!ENABLED(MachineCR10Orig)) +#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh +#endif +#if ENABLED(MachineMini) +#define PROBE_PT_1_X 50 // Probing points for 3-Point leveling of the mesh +#define PROBE_PT_1_Y 180 +#define PROBE_PT_2_X 180 +#define PROBE_PT_2_Y 180 +#define PROBE_PT_3_X 180 +#define PROBE_PT_3_Y 50 +#define MESH_INSET 15 +#endif - #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X +#if (ENABLED(MachineCR10S) ) +#define PROBE_PT_1_X 50 // Probing points for 3-Point leveling of the mesh +#define PROBE_PT_1_Y 270 +#define PROBE_PT_2_X 250 +#define PROBE_PT_2_Y 270 +#define PROBE_PT_3_X 250 +#define PROBE_PT_3_Y 50 +#define MESH_INSET 25 +#endif - #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle - #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 +#if ENABLED( MachineS4) +#define PROBE_PT_1_X 60 // Probing points for 3-Point leveling of the mesh +#define PROBE_PT_1_Y 340 +#define PROBE_PT_2_X 340 +#define PROBE_PT_2_Y 340 +#define PROBE_PT_3_X 340 +#define PROBE_PT_3_Y 60 +#define MESH_INSET 20 +#endif +#if ENABLED(MachineS5) +#define PROBE_PT_1_X 80 // Probing points for 3-Point leveling of the mesh +#define PROBE_PT_1_Y 420 +#define PROBE_PT_2_X 420 +#define PROBE_PT_2_Y 420 +#define PROBE_PT_3_X 420 +#define PROBE_PT_3_Y 80 +#define MESH_INSET 25 +#endif +// Mesh inset margin on print area +#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used - // as the Z-Height correction value. +#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle +#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500 + +#define RESTORE_LEVELING_AFTER_G28 +#define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used +// as the Z-Height correction value. #elif ENABLED(MESH_BED_LEVELING) - //=========================================================================== - //=================================== Mesh ================================== - //=========================================================================== +//=========================================================================== +//=================================== Mesh ================================== +//=========================================================================== - #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed - #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited. - #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X +#define MESH_INSET 20 // Mesh inset margin on print area +#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X - //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS +//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS #endif // BED_LEVELING /** - * Points to probe for all 3-point Leveling procedures. - * Override if the automatically selected points are inadequate. - */ -#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL) - //#define PROBE_PT_1_X 15 - //#define PROBE_PT_1_Y 180 - //#define PROBE_PT_2_X 15 - //#define PROBE_PT_2_Y 20 - //#define PROBE_PT_3_X 170 - //#define PROBE_PT_3_Y 20 + Use the LCD controller for bed leveling + Requires MESH_BED_LEVELING or PROBE_MANUALLY +*/ +#if (!ENABLED(ABL_EZABL)&& !ENABLED(ABL_BLTOUCH)) +#define LCD_BED_LEVELING #endif -/** - * Add a bed leveling sub-menu for ABL or MBL. - * Include a guided procedure if manual probing is enabled. - */ -//#define LCD_BED_LEVELING #if ENABLED(LCD_BED_LEVELING) - #define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. - #define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment +#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis. +#define LCD_PROBE_Z_RANGE 8 // Z Range centered on Z_MIN_POS for LCD Z adjustment #endif // Add a menu item to move between bed corners for manual bed adjustment -//#define LEVEL_BED_CORNERS +#define LEVEL_BED_CORNERS #if ENABLED(LEVEL_BED_CORNERS) #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling @@ -1061,9 +1431,9 @@ #endif /** - * Commands to execute at the end of G29 probing. - * Useful to retract or move the Z probe out of the way. - */ + Commands to execute at the end of G29 probing. + Useful to retract or move the Z probe out of the way. +*/ //#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10" @@ -1087,11 +1457,22 @@ // - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28). // - Prevent Z homing when the Z probe is outside bed area. // -//#define Z_SAFE_HOMING +#define Z_SAFE_HOMING #if ENABLED(Z_SAFE_HOMING) - #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28). - #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28). +#if (ENABLED(MachineCR10S) || ENABLED(MachineCR10Orig)) +#define Z_SAFE_HOMING_X_POINT 50 // X point for Z homing when homing all axis (G28). +#define Z_SAFE_HOMING_Y_POINT 50 // Y point for Z homing when homing all axis (G28). +#endif + +#if ENABLED(MachineS4) +#define Z_SAFE_HOMING_X_POINT 60 // X point for Z homing when homing all axis (G28). +#define Z_SAFE_HOMING_Y_POINT 60 // Y point for Z homing when homing all axis (G28). +#endif +#if ENABLED(MachineS5) +#define Z_SAFE_HOMING_X_POINT 80 // X point for Z homing when homing all axis (G28). +#define Z_SAFE_HOMING_Y_POINT 80 // Y point for Z homing when homing all axis (G28). +#endif #endif // Homing speeds (mm/m) @@ -1101,58 +1482,58 @@ // @section calibrate /** - * Bed Skew Compensation - * - * This feature corrects for misalignment in the XYZ axes. - * - * Take the following steps to get the bed skew in the XY plane: - * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) - * 2. For XY_DIAG_AC measure the diagonal A to C - * 3. For XY_DIAG_BD measure the diagonal B to D - * 4. For XY_SIDE_AD measure the edge A to D - * - * Marlin automatically computes skew factors from these measurements. - * Skew factors may also be computed and set manually: - * - * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 - * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) - * - * If desired, follow the same procedure for XZ and YZ. - * Use these diagrams for reference: - * - * Y Z Z - * ^ B-------C ^ B-------C ^ B-------C - * | / / | / / | / / - * | / / | / / | / / - * | A-------D | A-------D | A-------D - * +-------------->X +-------------->X +-------------->Y - * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR - */ + Bed Skew Compensation + + This feature corrects for misalignment in the XYZ axes. + + Take the following steps to get the bed skew in the XY plane: + 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185) + 2. For XY_DIAG_AC measure the diagonal A to C + 3. For XY_DIAG_BD measure the diagonal B to D + 4. For XY_SIDE_AD measure the edge A to D + + Marlin automatically computes skew factors from these measurements. + Skew factors may also be computed and set manually: + + - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2 + - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD))) + + If desired, follow the same procedure for XZ and YZ. + Use these diagrams for reference: + + Y Z Z + ^ B-------C ^ B-------C ^ B-------C + | / / | / / | / / + | / / | / / | / / + | A-------D | A-------D | A-------D + +-------------->X +-------------->X +-------------->Y + XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR +*/ //#define SKEW_CORRECTION #if ENABLED(SKEW_CORRECTION) - // Input all length measurements here: - #define XY_DIAG_AC 282.8427124746 - #define XY_DIAG_BD 282.8427124746 - #define XY_SIDE_AD 200 +// Input all length measurements here: +#define XY_DIAG_AC 282.8427124746 +#define XY_DIAG_BD 282.8427124746 +#define XY_SIDE_AD 200 - // Or, set the default skew factors directly here - // to override the above measurements: - #define XY_SKEW_FACTOR 0.0 +// Or, set the default skew factors directly here +// to override the above measurements: +#define XY_SKEW_FACTOR 0.0 - //#define SKEW_CORRECTION_FOR_Z - #if ENABLED(SKEW_CORRECTION_FOR_Z) - #define XZ_DIAG_AC 282.8427124746 - #define XZ_DIAG_BD 282.8427124746 - #define YZ_DIAG_AC 282.8427124746 - #define YZ_DIAG_BD 282.8427124746 - #define YZ_SIDE_AD 200 - #define XZ_SKEW_FACTOR 0.0 - #define YZ_SKEW_FACTOR 0.0 - #endif +//#define SKEW_CORRECTION_FOR_Z +#if ENABLED(SKEW_CORRECTION_FOR_Z) +#define XZ_DIAG_AC 282.8427124746 +#define XZ_DIAG_BD 282.8427124746 +#define YZ_DIAG_AC 282.8427124746 +#define YZ_DIAG_BD 282.8427124746 +#define YZ_SIDE_AD 200 +#define XZ_SKEW_FACTOR 0.0 +#define YZ_SKEW_FACTOR 0.0 +#endif - // Enable this option for M852 to set skew at runtime - //#define SKEW_CORRECTION_GCODE +// Enable this option for M852 to set skew at runtime +//#define SKEW_CORRECTION_GCODE #endif //============================================================================= @@ -1169,10 +1550,11 @@ // M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily). // M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to. // -//#define EEPROM_SETTINGS // Enable for M500 and M501 commands +#define EEPROM_SETTINGS // Enable for M500 and M501 commands //#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release! +#if(!ENABLED(MachineCR10Orig)) #define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM. - +#endif // // Host Keepalive // @@ -1210,116 +1592,116 @@ #define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255 /** - * Nozzle Park - * - * Park the nozzle at the given XYZ position on idle or G27. - * - * The "P" parameter controls the action applied to the Z axis: - * - * P0 (Default) If Z is below park Z raise the nozzle. - * P1 Raise the nozzle always to Z-park height. - * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. - */ -//#define NOZZLE_PARK_FEATURE + Nozzle Park + + Park the nozzle at the given XYZ position on idle or G27. + + The "P" parameter controls the action applied to the Z axis: + + P0 (Default) If Z is below park Z raise the nozzle. + P1 Raise the nozzle always to Z-park height. + P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS. +*/ +#define NOZZLE_PARK_FEATURE #if ENABLED(NOZZLE_PARK_FEATURE) - // Specify a park position as { X, Y, Z } - #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 } - #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) - #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) +// Specify a park position as { X, Y, Z } +#define NOZZLE_PARK_POINT { (10), (10), 20 } +#define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis) +#define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers) #endif /** - * Clean Nozzle Feature -- EXPERIMENTAL - * - * Adds the G12 command to perform a nozzle cleaning process. - * - * Parameters: - * P Pattern - * S Strokes / Repetitions - * T Triangles (P1 only) - * - * Patterns: - * P0 Straight line (default). This process requires a sponge type material - * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) - * between the start / end points. - * - * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the - * number of zig-zag triangles to do. "S" defines the number of strokes. - * Zig-zags are done in whichever is the narrower dimension. - * For example, "G12 P1 S1 T3" will execute: - * - * -- - * | (X0, Y1) | /\ /\ /\ | (X1, Y1) - * | | / \ / \ / \ | - * A | | / \ / \ / \ | - * | | / \ / \ / \ | - * | (X0, Y0) | / \/ \/ \ | (X1, Y0) - * -- +--------------------------------+ - * |________|_________|_________| - * T1 T2 T3 - * - * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. - * "R" specifies the radius. "S" specifies the stroke count. - * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. - * - * Caveats: The ending Z should be the same as starting Z. - * Attention: EXPERIMENTAL. G-code arguments may change. - * - */ + Clean Nozzle Feature -- EXPERIMENTAL + + Adds the G12 command to perform a nozzle cleaning process. + + Parameters: + P Pattern + S Strokes / Repetitions + T Triangles (P1 only) + + Patterns: + P0 Straight line (default). This process requires a sponge type material + at a fixed bed location. "S" specifies strokes (i.e. back-forth motions) + between the start / end points. + + P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the + number of zig-zag triangles to do. "S" defines the number of strokes. + Zig-zags are done in whichever is the narrower dimension. + For example, "G12 P1 S1 T3" will execute: + + -- + | (X0, Y1) | /\ /\ /\ | (X1, Y1) + | | / \ / \ / \ | + A | | / \ / \ / \ | + | | / \ / \ / \ | + | (X0, Y0) | / \/ \/ \ | (X1, Y0) + -- +--------------------------------+ + |________|_________|_________| + T1 T2 T3 + + P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE. + "R" specifies the radius. "S" specifies the stroke count. + Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT. + + Caveats: The ending Z should be the same as starting Z. + Attention: EXPERIMENTAL. G-code arguments may change. + +*/ //#define NOZZLE_CLEAN_FEATURE #if ENABLED(NOZZLE_CLEAN_FEATURE) - // Default number of pattern repetitions - #define NOZZLE_CLEAN_STROKES 12 +// Default number of pattern repetitions +#define NOZZLE_CLEAN_STROKES 12 - // Default number of triangles - #define NOZZLE_CLEAN_TRIANGLES 3 +// Default number of triangles +#define NOZZLE_CLEAN_TRIANGLES 3 - // Specify positions as { X, Y, Z } - #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} - #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} +// Specify positions as { X, Y, Z } +#define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)} +#define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)} - // Circular pattern radius - #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 - // Circular pattern circle fragments number - #define NOZZLE_CLEAN_CIRCLE_FN 10 - // Middle point of circle - #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT +// Circular pattern radius +#define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5 +// Circular pattern circle fragments number +#define NOZZLE_CLEAN_CIRCLE_FN 10 +// Middle point of circle +#define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT - // Moves the nozzle to the initial position - #define NOZZLE_CLEAN_GOBACK +// Moves the nozzle to the initial position +#define NOZZLE_CLEAN_GOBACK #endif /** - * Print Job Timer - * - * Automatically start and stop the print job timer on M104/M109/M190. - * - * M104 (hotend, no wait) - high temp = none, low temp = stop timer - * M109 (hotend, wait) - high temp = start timer, low temp = stop timer - * M190 (bed, wait) - high temp = start timer, low temp = none - * - * The timer can also be controlled with the following commands: - * - * M75 - Start the print job timer - * M76 - Pause the print job timer - * M77 - Stop the print job timer - */ + Print Job Timer + + Automatically start and stop the print job timer on M104/M109/M190. + + M104 (hotend, no wait) - high temp = none, low temp = stop timer + M109 (hotend, wait) - high temp = start timer, low temp = stop timer + M190 (bed, wait) - high temp = start timer, low temp = none + + The timer can also be controlled with the following commands: + + M75 - Start the print job timer + M76 - Pause the print job timer + M77 - Stop the print job timer +*/ #define PRINTJOB_TIMER_AUTOSTART /** - * Print Counter - * - * Track statistical data such as: - * - * - Total print jobs - * - Total successful print jobs - * - Total failed print jobs - * - Total time printing - * - * View the current statistics with M78. - */ + Print Counter + + Track statistical data such as: + + - Total print jobs + - Total successful print jobs + - Total failed print jobs + - Total time printing + + View the current statistics with M78. +*/ //#define PRINTCOUNTER //============================================================================= @@ -1329,79 +1711,80 @@ // @section lcd /** - * LCD LANGUAGE - * - * Select the language to display on the LCD. These languages are available: - * - * en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, - * gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, - * tr, uk, zh_CN, zh_TW, test - * - * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } - */ + LCD LANGUAGE + + Select the language to display on the LCD. These languages are available: + + en, an, bg, ca, cn, cz, cz_utf8, de, el, el-gr, es, es_utf8, eu, fi, fr, fr_utf8, + gl, hr, it, kana, kana_utf8, nl, pl, pt, pt_utf8, pt-br, pt-br_utf8, ru, sk_utf8, + tr, uk, zh_CN, zh_TW, test + + :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cn':'Chinese', 'cz':'Czech', 'cz_utf8':'Czech (UTF8)', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'es_utf8':'Spanish (UTF8)', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'fr_utf8':'French (UTF8)', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'kana':'Japanese', 'kana_utf8':'Japanese (UTF8)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'pt-br_utf8':'Portuguese (Brazilian UTF8)', 'pt_utf8':'Portuguese (UTF8)', 'ru':'Russian', 'sk_utf8':'Slovak (UTF8)', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Taiwan)', test':'TEST' } +*/ #define LCD_LANGUAGE en /** - * LCD Character Set - * - * Note: This option is NOT applicable to Graphical Displays. - * - * All character-based LCDs provide ASCII plus one of these - * language extensions: - * - * - JAPANESE ... the most common - * - WESTERN ... with more accented characters - * - CYRILLIC ... for the Russian language - * - * To determine the language extension installed on your controller: - * - * - Compile and upload with LCD_LANGUAGE set to 'test' - * - Click the controller to view the LCD menu - * - The LCD will display Japanese, Western, or Cyrillic text - * - * See http://marlinfw.org/docs/development/lcd_language.html - * - * :['JAPANESE', 'WESTERN', 'CYRILLIC'] - */ + LCD Character Set + + Note: This option is NOT applicable to Graphical Displays. + + All character-based LCDs provide ASCII plus one of these + language extensions: + + - JAPANESE ... the most common + - WESTERN ... with more accented characters + - CYRILLIC ... for the Russian language + + To determine the language extension installed on your controller: + + - Compile and upload with LCD_LANGUAGE set to 'test' + - Click the controller to view the LCD menu + - The LCD will display Japanese, Western, or Cyrillic text + + See http://marlinfw.org/docs/development/lcd_language.html + + :['JAPANESE', 'WESTERN', 'CYRILLIC'] +*/ #define DISPLAY_CHARSET_HD44780 JAPANESE /** - * LCD TYPE - * - * Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. - * Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. - * (These options will be enabled automatically for most displays.) - * - * IMPORTANT: The U8glib library is required for Full Graphic Display! - * https://github.com/olikraus/U8glib_Arduino - */ + LCD TYPE + + Enable ULTRA_LCD for a 16x2, 16x4, 20x2, or 20x4 character-based LCD. + Enable DOGLCD for a 128x64 (ST7565R) Full Graphical Display. + (These options will be enabled automatically for most displays.) + + IMPORTANT: The U8glib library is required for Full Graphic Display! + https://github.com/olikraus/U8glib_Arduino +*/ //#define ULTRA_LCD // Character based //#define DOGLCD // Full graphics display /** - * SD CARD - * - * SD Card support is disabled by default. If your controller has an SD slot, - * you must uncomment the following option or it won't work. - * - */ -//#define SDSUPPORT + SD CARD + + SD Card support is disabled by default. If your controller has an SD slot, + you must uncomment the following option or it won't work. + +*/ + +#define SDSUPPORT /** - * SD CARD: SPI SPEED - * - * Enable one of the following items for a slower SPI transfer speed. - * This may be required to resolve "volume init" errors. - */ + SD CARD: SPI SPEED + + Enable one of the following items for a slower SPI transfer speed. + This may be required to resolve "volume init" errors. +*/ //#define SPI_SPEED SPI_HALF_SPEED //#define SPI_SPEED SPI_QUARTER_SPEED //#define SPI_SPEED SPI_EIGHTH_SPEED /** - * SD CARD: ENABLE CRC - * - * Use CRC checks and retries on the SD communication. - */ + SD CARD: ENABLE CRC + + Use CRC checks and retries on the SD communication. +*/ //#define SD_CHECK_AND_RETRY /** @@ -1419,23 +1802,23 @@ // This option overrides the default number of encoder pulses needed to // produce one step. Should be increased for high-resolution encoders. // -//#define ENCODER_PULSES_PER_STEP 4 +#define ENCODER_PULSES_PER_STEP 4 // // Use this option to override the number of step signals required to // move between next/prev menu items. // -//#define ENCODER_STEPS_PER_MENU_ITEM 1 +#define ENCODER_STEPS_PER_MENU_ITEM 1 /** - * Encoder Direction Options - * - * Test your encoder's behavior first with both options disabled. - * - * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. - * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. - * Reversed Value Editing only? Enable BOTH options. - */ + Encoder Direction Options + + Test your encoder's behavior first with both options disabled. + + Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION. + Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION. + Reversed Value Editing only? Enable BOTH options. +*/ // // This option reverses the encoder direction everywhere. @@ -1457,15 +1840,18 @@ // // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu. // -//#define INDIVIDUAL_AXIS_HOMING_MENU - +#if(!ENABLED(MachineCR10Orig)) +#define INDIVIDUAL_AXIS_HOMING_MENU +#endif // // SPEAKER/BUZZER // // If you have a speaker that can produce tones, enable it here. // By default Marlin assumes you have a buzzer with a fixed frequency. // -//#define SPEAKER +#if(!ENABLED(MachineCR10Orig)) +#define SPEAKER +#endif // // The duration and frequency for the UI feedback sound. @@ -1546,8 +1932,9 @@ // RepRapDiscount FULL GRAPHIC Smart Controller // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller // -//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER - +#if(!ENABLED(OrigLCD)) + #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER +#endif // // MakerLab Mini Panel with graphic // controller and SD support - http://reprap.org/wiki/Mini_panel @@ -1586,13 +1973,13 @@ // ANET and Tronxy Controller supported displays. // //#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin. - // This LCD is known to be susceptible to electrical interference - // which scrambles the display. Pressing any button clears it up. - // This is a LCD2004 display with 5 analog buttons. +// This LCD is known to be susceptible to electrical interference +// which scrambles the display. Pressing any button clears it up. +// This is a LCD2004 display with 5 analog buttons. //#define ANET_FULL_GRAPHICS_LCD // Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6 - // A clone of the RepRapDiscount full graphics display but with - // different pins/wiring (see pins_ANET_10.h). +// A clone of the RepRapDiscount full graphics display but with +// different pins/wiring (see pins_ANET_10.h). // // LCD for Melzi Card with Graphical LCD @@ -1660,8 +2047,8 @@ // //#define SAV_3DGLCD #if ENABLED(SAV_3DGLCD) - //#define U8GLIB_SSD1306 - #define U8GLIB_SH1106 +//#define U8GLIB_SSD1306 +#define U8GLIB_SH1106 #endif // @@ -1702,8 +2089,9 @@ // This is RAMPS-compatible using a single 10-pin connector. // (For CR-10 owners who want to replace the Melzi Creality board but retain the display) // -//#define CR10_STOCKDISPLAY - +#if(ENABLED(OrigLCD)) + #define CR10_STOCKDISPLAY +#endif // // MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER // http://reprap.org/wiki/MKS_12864OLED @@ -1767,75 +2155,75 @@ //#define PCA9632 /** - * RGB LED / LED Strip Control - * - * Enable support for an RGB LED connected to 5V digital pins, or - * an RGB Strip connected to MOSFETs controlled by digital pins. - * - * Adds the M150 command to set the LED (or LED strip) color. - * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of - * luminance values can be set from 0 to 255. - * For Neopixel LED an overall brightness parameter is also available. - * + RGB LED / LED Strip Control + + Enable support for an RGB LED connected to 5V digital pins, or + an RGB Strip connected to MOSFETs controlled by digital pins. + + Adds the M150 command to set the LED (or LED strip) color. + If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of + luminance values can be set from 0 to 255. + For Neopixel LED an overall brightness parameter is also available. + * *** CAUTION *** - * LED Strips require a MOFSET Chip between PWM lines and LEDs, - * as the Arduino cannot handle the current the LEDs will require. - * Failure to follow this precaution can destroy your Arduino! - * NOTE: A separate 5V power supply is required! The Neopixel LED needs - * more current than the Arduino 5V linear regulator can produce. + LED Strips require a MOFSET Chip between PWM lines and LEDs, + as the Arduino cannot handle the current the LEDs will require. + Failure to follow this precaution can destroy your Arduino! + NOTE: A separate 5V power supply is required! The Neopixel LED needs + more current than the Arduino 5V linear regulator can produce. * *** CAUTION *** - * - * LED Type. Enable only one of the following two options. - * - */ + + LED Type. Enable only one of the following two options. + +*/ //#define RGB_LED //#define RGBW_LED #if ENABLED(RGB_LED) || ENABLED(RGBW_LED) - #define RGB_LED_R_PIN 34 - #define RGB_LED_G_PIN 43 - #define RGB_LED_B_PIN 35 - #define RGB_LED_W_PIN -1 +#define RGB_LED_R_PIN 34 +#define RGB_LED_G_PIN 43 +#define RGB_LED_B_PIN 35 +#define RGB_LED_W_PIN -1 #endif // Support for Adafruit Neopixel LED driver //#define NEOPIXEL_LED #if ENABLED(NEOPIXEL_LED) - #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) - #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) - #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip - #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. - #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) - //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup +#define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h) +#define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba) +#define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip +#define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once. +#define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255) +//#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup #endif /** - * Printer Event LEDs - * - * During printing, the LEDs will reflect the printer status: - * - * - Gradually change from blue to violet as the heated bed gets to target temp - * - Gradually change from violet to red as the hotend gets to temperature - * - Change to white to illuminate work surface - * - Change to green once print has finished - * - Turn off after the print has finished and the user has pushed a button - */ + Printer Event LEDs + + During printing, the LEDs will reflect the printer status: + + - Gradually change from blue to violet as the heated bed gets to target temp + - Gradually change from violet to red as the hotend gets to temperature + - Change to white to illuminate work surface + - Change to green once print has finished + - Turn off after the print has finished and the user has pushed a button +*/ #if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED) - #define PRINTER_EVENT_LEDS +#define PRINTER_EVENT_LEDS #endif /** - * R/C SERVO support - * Sponsored by TrinityLabs, Reworked by codexmas - */ + R/C SERVO support + Sponsored by TrinityLabs, Reworked by codexmas +*/ /** - * Number of servos - * - * For some servo-related options NUM_SERVOS will be set automatically. - * Set this manually if there are extra servos needing manual control. - * Leave undefined or set to 0 to entirely disable the servo subsystem. - */ + Number of servos + + For some servo-related options NUM_SERVOS will be set automatically. + Set this manually if there are extra servos needing manual control. + Leave undefined or set to 0 to entirely disable the servo subsystem. +*/ //#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command // Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle. diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h index 0decaf8871..296e979f9c 100644 --- a/Marlin/Configuration_adv.h +++ b/Marlin/Configuration_adv.h @@ -75,7 +75,7 @@ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD */ #if ENABLED(THERMAL_PROTECTION_HOTENDS) - #define THERMAL_PROTECTION_PERIOD 40 // Seconds + #define THERMAL_PROTECTION_PERIOD 60 // Seconds #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius /** @@ -90,7 +90,7 @@ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set * below 2. */ - #define WATCH_TEMP_PERIOD 20 // Seconds + #define WATCH_TEMP_PERIOD 50 // Seconds #define WATCH_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -98,13 +98,13 @@ * Thermal Protection parameters for the bed are just as above for hotends. */ #if ENABLED(THERMAL_PROTECTION_BED) - #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds + #define THERMAL_PROTECTION_BED_PERIOD 30 // Seconds #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius /** * As described above, except for the bed (M140/M190/M303). */ - #define WATCH_BED_TEMP_PERIOD 60 // Seconds + #define WATCH_BED_TEMP_PERIOD 120 // Seconds #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius #endif @@ -128,14 +128,17 @@ * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp. * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode */ + #if(!ENABLED(MachineCR10Orig)) #define AUTOTEMP +#endif #if ENABLED(AUTOTEMP) #define AUTOTEMP_OLDWEIGHT 0.98 #endif // Show extra position information in M114 -//#define M114_DETAIL - + #if(!ENABLED(MachineCR10Orig)) +#define M114_DETAIL +#endif // Show Temperature ADC value // Enable for M105 to include ADC values read from temperature sensors. //#define SHOW_TEMP_ADC_VALUES @@ -198,7 +201,7 @@ */ //#define USE_CONTROLLER_FAN #if ENABLED(USE_CONTROLLER_FAN) - //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan + //#define CONTROLLER_FAN_PIN FAN1_PIN // Set a custom pin for the controller fan #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled #define CONTROLLERFAN_SPEED 255 // 255 == full speed #endif @@ -206,7 +209,8 @@ // When first starting the main fan, run it at full speed for the // given number of milliseconds. This gets the fan spinning reliably // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu) -//#define FAN_KICKSTART_TIME 100 + +#define FAN_KICKSTART_TIME 100 // This defines the minimal speed for the main fan, run in PWM mode // to enable uncomment and set minimal PWM speed for reliable running (1-255) @@ -371,7 +375,7 @@ #define Y_HOME_BUMP_MM 5 #define Z_HOME_BUMP_MM 2 #define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate) -//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially +#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially // When G28 is called, this option will make Y home before X //#define HOME_Y_BEFORE_X @@ -502,19 +506,28 @@ // @section lcd // Include a page of printer information in the LCD Main Menu -//#define LCD_INFO_MENU + +#if(!ENABLED(MachineCR10Orig)) +#define LCD_INFO_MENU +#endif +// Leave out seldom-used LCD menu items to recover some Program Memory + #if(ENABLED(MachineCR10Orig)) +#define SLIM_LCD_MENUS +#endif + // Scroll a longer status message into view -//#define STATUS_MESSAGE_SCROLLING + #if(!ENABLED(MachineCR10Orig)) +#define STATUS_MESSAGE_SCROLLING // On the Info Screen, display XY with one decimal place when possible -//#define LCD_DECIMAL_SMALL_XY - +#define LCD_DECIMAL_SMALL_XY +#endif // The timeout (in ms) to return to the status screen from sub-menus -//#define LCD_TIMEOUT_TO_STATUS 15000 +#define LCD_TIMEOUT_TO_STATUS 15000 // Add an 'M73' G-code to set the current percentage -//#define LCD_SET_PROGRESS_MANUALLY +#define LCD_SET_PROGRESS_MANUALLY #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY) //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing @@ -551,6 +564,7 @@ // as SD_DETECT_PIN in your board's pins definitions. // This setting should be disabled unless you are using a push button, pulling the pin to ground. // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER). + #define SD_DETECT_INVERTED #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished @@ -558,8 +572,9 @@ // Reverse SD sort to show "more recent" files first, according to the card's FAT. // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended. + #if(!ENABLED(MachineCR10Orig)) #define SDCARD_RATHERRECENTFIRST - +#endif // Add an option in the menu to run all auto#.g files //#define MENU_ADDAUTOSTART @@ -571,7 +586,7 @@ * an option on the LCD screen to continue the print from the last-known * point in the file. */ - //#define POWER_LOSS_RECOVERY + #define POWER_LOSS_RECOVERY /** * Sort SD file listings in alphabetical order. @@ -596,15 +611,16 @@ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!) * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!) */ - //#define SDCARD_SORT_ALPHA - + #if(!ENABLED(MachineCR10Orig)) + #define SDCARD_SORT_ALPHA +#endif // SD Card Sorting options #if ENABLED(SDCARD_SORT_ALPHA) - #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each. + #define SDSORT_LIMIT 25 // Maximum number of sorted items (10-256). Costs 27 bytes each. #define FOLDER_SORTING -1 // -1=above 0=none 1=below #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code. #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting. - #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) + #define SDSORT_USES_STACK true // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.) #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option. #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use! #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting. @@ -615,7 +631,7 @@ //#define LONG_FILENAME_HOST_SUPPORT // Enable this option to scroll long filenames in the SD card menu - //#define SCROLL_LONG_FILENAMES + #define SCROLL_LONG_FILENAMES /** * This option allows you to abort SD printing when any endstop is triggered. @@ -634,7 +650,7 @@ /** * Auto-report SdCard status with M27 S */ - //#define AUTO_REPORT_SD_STATUS + #define AUTO_REPORT_SD_STATUS #endif // SDSUPPORT @@ -652,7 +668,7 @@ */ #if ENABLED(DOGLCD) // Show SD percentage next to the progress bar - //#define DOGM_SD_PERCENT + #define DOGM_SD_PERCENT // Enable to save many cycles by drawing a hollow frame on the Info Screen #define XYZ_HOLLOW_FRAME @@ -662,8 +678,9 @@ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. - //#define USE_BIG_EDIT_FONT - + #if(!ENABLED(MachineCR10Orig)) + #define USE_BIG_EDIT_FONT +#endif // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM. // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese. //#define USE_SMALL_INFOFONT @@ -718,16 +735,20 @@ * * Warning: Does not respect endstops! */ -//#define BABYSTEPPING +#define BABYSTEPPING #if ENABLED(BABYSTEPPING) //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA! #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way - #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion. - //#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping - //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. + #define BABYSTEP_MULTIPLICATOR 5 // Babysteps are very small. Increase for faster motion. + #if(ENABLED(ABL_EZABL) || ENABLED(ABL_BLTOUCH)) + #define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping + //#if(!ENABLED(MachineCR10Orig)) + #define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor + // #endif + #endif + #define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping. #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds. // Note: Extra time may be added to mitigate controller latency. - //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor #endif // @section extruder @@ -748,19 +769,53 @@ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions. * Mention @Sebastianv650 on GitHub to alert the author of any issues. */ -//#define LIN_ADVANCE + #if(!ENABLED(MachineCR10Orig)) +#define LIN_ADVANCE +#endif #if ENABLED(LIN_ADVANCE) - #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed + #define LIN_ADVANCE_K 0.5 // Unit: mm compression per 1mm/s extruder speed //#define LA_DEBUG // If enabled, this will generate debug information output over USB. #endif // @section leveling +#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS) + #define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS +#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS) + #define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2) +#endif + #if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL) // Override the mesh area if the automatic (max) area is too large - //#define MESH_MIN_X MESH_INSET + + #if( (X_PROBE_OFFSET_FROM_EXTRUDER + 15) > 0 ) + #define MESH_MIN_X (X_PROBE_OFFSET_FROM_EXTRUDER + 5) + #else + #define MESH_MIN_X 10 + #endif + + #if( (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 10) < X_BED_SIZE) + #define MESH_MAX_X (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 5) + #else + #define MESH_MAX_X (X_BED_SIZE - 10) + #endif + + #if ( (Y_PROBE_OFFSET_FROM_EXTRUDER + 25) > 10 ) + #define MESH_MIN_Y (Y_PROBE_OFFSET_FROM_EXTRUDER + 25) + #else + #define MESH_MIN_Y 25 + #endif + + #if( (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) < Y_BED_SIZE) + #define MESH_MAX_Y (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 25) + #else + #define MESH_MAX_Y (Y_BED_SIZE - 25) + #endif + + + //#define MESH_MIN_X 0 - X_PROBE_OFFSET_FROM_EXTRUDER //#define MESH_MIN_Y MESH_INSET - //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET) + //#define MESH_MAX_X X_BED_SIZE - 5 //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET) #endif @@ -769,7 +824,9 @@ // // G2/G3 Arc Support // + #if(!ENABLED(MachineCR10Orig)) #define ARC_SUPPORT // Disable this feature to save ~3226 bytes +#endif #if ENABLED(ARC_SUPPORT) #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections @@ -808,11 +865,9 @@ // The number of linear motions that can be in the plan at any give time. // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering. -#if ENABLED(SDSUPPORT) - #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller -#else + #define BLOCK_BUFFER_SIZE 16 // maximize block buffer -#endif + // @section serial @@ -855,7 +910,7 @@ // enter the serial receive buffer, so they cannot be blocked. // Currently handles M108, M112, M410 // Does not work on boards using AT90USB (USBCON) processors! -//#define EMERGENCY_PARSER +#define EMERGENCY_PARSER // Bad Serial-connections can miss a received command by sending an 'ok' // Therefore some clients abort after 30 seconds in a timeout. @@ -864,8 +919,9 @@ //#define NO_TIMEOUTS 1000 // Milliseconds // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary. -//#define ADVANCED_OK - + #if(!ENABLED(MachineCR10Orig)) +#define ADVANCED_OK +#endif // @section extras /** @@ -916,43 +972,44 @@ * Requires NOZZLE_PARK_FEATURE. * This feature is required for the default FILAMENT_RUNOUT_SCRIPT. */ -//#define ADVANCED_PAUSE_FEATURE + +#define ADVANCED_PAUSE_FEATURE + #if ENABLED(ADVANCED_PAUSE_FEATURE) #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate. - #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract. + #define PAUSE_PARK_RETRACT_LENGTH 4 // (mm) Initial retract. // This short retract is done immediately, before parking the nozzle. - #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 41 // (mm/s) Unload filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload. + #define FILAMENT_CHANGE_UNLOAD_LENGTH 430 // (mm) The length of filament for a complete unload. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. // Set to 0 for manual unloading. #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load. #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material. // 0 to disable start loading and skip to fast load only - #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast. + #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 30 // (mm/s) Load filament feedrate. This can be pretty fast. #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate. - #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle. + #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 430 // (mm) Load length of filament, from extruder gear to nozzle. // For Bowden, the full length of the tube and nozzle. // For direct drive, the full length of the nozzle. //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted. #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate. - #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading. + #define ADVANCED_PAUSE_PURGE_LENGTH 20 // (mm) Length to extrude after loading. // Set to 0 for manual extrusion. // Filament can be extruded repeatedly from the Filament Change menu // until extrusion is consistent, and to purge old filament. // Filament Unload does a Retract, Delay, and Purge first: - #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length. + #define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length. #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract. - #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged. - + #define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged. #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety. - #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed. + #define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed. #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change. - //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. - //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change + #define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change. + #define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu. //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302) @@ -1039,19 +1096,6 @@ * You may also use software SPI if you wish to use general purpose IO pins. */ //#define HAVE_TMC2130 -#if ENABLED(HAVE_TMC2130) // Choose your axes here. This is mandatory! - //#define X_IS_TMC2130 - //#define X2_IS_TMC2130 - //#define Y_IS_TMC2130 - //#define Y2_IS_TMC2130 - //#define Z_IS_TMC2130 - //#define Z2_IS_TMC2130 - //#define E0_IS_TMC2130 - //#define E1_IS_TMC2130 - //#define E2_IS_TMC2130 - //#define E3_IS_TMC2130 - //#define E4_IS_TMC2130 -#endif /** * Enable this for SilentStepStick Trinamic TMC2208 UART-configurable stepper drivers. @@ -1064,7 +1108,22 @@ * (https://github.com/teemuatlut/TMC2208Stepper). */ //#define HAVE_TMC2208 -#if ENABLED(HAVE_TMC2208) // Choose your axes here. This is mandatory! + +#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) + + // CHOOSE YOUR MOTORS HERE, THIS IS MANDATORY + //#define X_IS_TMC2130 + //#define X2_IS_TMC2130 + //#define Y_IS_TMC2130 + //#define Y2_IS_TMC2130 + //#define Z_IS_TMC2130 + //#define Z2_IS_TMC2130 + //#define E0_IS_TMC2130 + //#define E1_IS_TMC2130 + //#define E2_IS_TMC2130 + //#define E3_IS_TMC2130 + //#define E4_IS_TMC2130 + //#define X_IS_TMC2208 //#define X2_IS_TMC2208 //#define Y_IS_TMC2208 @@ -1076,9 +1135,10 @@ //#define E2_IS_TMC2208 //#define E3_IS_TMC2208 //#define E4_IS_TMC2208 -#endif -#if ENABLED(HAVE_TMC2130) || ENABLED(HAVE_TMC2208) + /** + * Stepper driver settings + */ #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130 #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current @@ -1425,8 +1485,9 @@ /** * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins */ -//#define PINS_DEBUGGING - + #if(!ENABLED(MachineCR10Orig)) +#define PINS_DEBUGGING +#endif /** * Auto-report temperatures with M155 S */ @@ -1435,8 +1496,9 @@ /** * Include capabilities in M115 output */ + #if(!ENABLED(MachineCR10Orig)) #define EXTENDED_CAPABILITIES_REPORT - +#endif /** * Disable all Volumetric extrusion options */ @@ -1479,26 +1541,42 @@ /** * User-defined menu items that execute custom GCode */ -//#define CUSTOM_USER_MENUS +#if(ENABLED(ABL_UBL)) + #define CUSTOM_USER_MENUS +#endif + #if ENABLED(CUSTOM_USER_MENUS) - #define USER_SCRIPT_DONE "M117 User Script Done" + //#define USER_SCRIPT_DONE "M117 User Script Done" #define USER_SCRIPT_AUDIBLE_FEEDBACK - //#define USER_SCRIPT_RETURN // Return to status screen after a script + #define USER_SCRIPT_RETURN // Return to status screen after a script - #define USER_DESC_1 "Home & UBL Info" - #define USER_GCODE_1 "G28\nG29 W" +#if ENABLED(BedDC) + #define USER_DESC_1 "UBL Commission Step 1" + #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S55 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n" + + #define USER_DESC_2 "UBL Commission Step 2" + #define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n" - #define USER_DESC_2 "Preheat for PLA" - #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND) + #define USER_DESC_3 "Prep for Z Adjust" + #define USER_GCODE_3 "M190 55 \n M104 235 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0" +#endif + +#if ENABLED(BedAC) + #define USER_DESC_1 "UBL Commission Step 1" + #define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S75 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n" + + #define USER_DESC_2 "UBL Commission Step 2" + #define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n" - #define USER_DESC_3 "Preheat for ABS" - #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND) + #define USER_DESC_3 "Prep for Z Adjust" + #define USER_GCODE_3 "M190 75 \n M104 235 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n" +#endif - #define USER_DESC_4 "Heat Bed/Home/Level" - #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29" + #define USER_DESC_4 "Fill Mesh Points" + #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n" - #define USER_DESC_5 "Home & Info" - #define USER_GCODE_5 "G28\nM503" + #define USER_DESC_5 "Run Mesh Validation" + #define USER_GCODE_5 "G26 \n" #endif /** @@ -1513,8 +1591,8 @@ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'. * The host must be configured to handle the action command. */ -//#define ACTION_ON_PAUSE "pause" -//#define ACTION_ON_RESUME "resume" +#define ACTION_ON_PAUSE "pause" +#define ACTION_ON_RESUME "resume" //=========================================================================== //====================== I2C Position Encoder Settings ====================== diff --git a/Marlin/Version.h b/Marlin/Version.h index fa3ec9feca..e0f052747d 100644 --- a/Marlin/Version.h +++ b/Marlin/Version.h @@ -35,20 +35,22 @@ /** * Marlin release version identifier */ - #define SHORT_BUILD_VERSION "bugfix-1.1.x" + #define SHORT_BUILD_VERSION "1.1.8_B8" /** * Verbose version identifier which should contain a reference to the location * from where the binary was downloaded or the source code was compiled. */ - #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " (Github)" + + + #define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D " /** * The STRING_DISTRIBUTION_DATE represents when the binary file was built, * here we define this default string as the date where the latest release * version was tagged. */ - #define STRING_DISTRIBUTION_DATE "2018-01-20" + #define STRING_DISTRIBUTION_DATE "2018-04-16" /** * Required minimum Configuration.h and Configuration_adv.h file versions. @@ -70,7 +72,7 @@ /** * Defines a generic printer name to be output to the LCD after booting Marlin. */ - #define MACHINE_NAME "3D Printer" + #define MACHINE_NAME "TM3DCR10" /** * The SOURCE_CODE_URL is the location where users will find the Marlin Source @@ -89,6 +91,6 @@ * The WEBSITE_URL is the location where users can get more information such as * documentation about a specific Marlin release. */ - #define WEBSITE_URL "http://marlinfw.org" + #define WEBSITE_URL "tinymachines3d.com" #endif // USE_AUTOMATIC_VERSIONING diff --git a/Marlin/_Bootscreen.h b/Marlin/_Bootscreen.h new file mode 100644 index 0000000000..cf8c657d66 --- /dev/null +++ b/Marlin/_Bootscreen.h @@ -0,0 +1,106 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Bitmap for splashscreen + * + * You may use one of the following tools to generate the C++ bitmap array from + * a black and white image: + * + * - http://www.marlinfw.org/tools/u8glib/converter.html + * - http://www.digole.com/tools/PicturetoC_Hex_converter.php + */ +#include + +#define CUSTOM_BOOTSCREEN_TIMEOUT 2500 +#define CUSTOM_BOOTSCREEN_BMPWIDTH 128 +#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64 + +const unsigned char custom_start_bmp[] PROGMEM = { +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, +0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, +0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, +0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, +0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F, +0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F, +0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F, +0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F, +0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F, +0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F, +0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F, +0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F, +0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F, +0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F, +0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F, +0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F, +0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F, +0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F, +0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F, +0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F, +0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F, +0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF, +0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F, +0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF, +0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F, +0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F, +0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7, +0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7, +0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3, +0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3, +0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3, +0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3, +0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7, +0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7, +0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, +0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF +}; + + + diff --git a/Marlin/_Statusscreen.h b/Marlin/_Statusscreen.h new file mode 100644 index 0000000000..8a3811c111 --- /dev/null +++ b/Marlin/_Statusscreen.h @@ -0,0 +1,460 @@ +/** + * Marlin 3D Printer Firmware + * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin] + * + * Based on Sprinter and grbl. + * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm + * + * This program is free software: you can redistribute it and/or modify + * it under the terms of the GNU General Public License as published by + * the Free Software Foundation, either version 3 of the License, or + * (at your option) any later version. + * + * This program is distributed in the hope that it will be useful, + * but WITHOUT ANY WARRANTY; without even the implied warranty of + * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + * + * You should have received a copy of the GNU General Public License + * along with this program. If not, see . + * + */ + +/** + * Custom Status Screen bitmap + * + * Place this file in the root with your configuration files + * and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h. + * + * Use the Marlin Bitmap Converter to make your own: + * http://marlinfw.org/tools/u8glib/converter.html + */ +#include "MarlinConfig.h" + +//============================================ + +#define STATUS_SCREENWIDTH 128 + +#define STATUS_SCREEN_HOTEND_TEXT_X(E) (41 + (E) * 20) + +#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73) + +#define FAN_ANIM_FRAMES 3 +#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105) +#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27) + +//============================================ + +#if HOTENDS < 2 + + #if FAN_ANIM_FRAMES <= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + const unsigned char status_screen1_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + + #elif FAN_ANIM_FRAMES == 3 + + +const unsigned char status_screen0_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + + + const unsigned char status_screen1_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + const unsigned char status_screen2_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + + #elif FAN_ANIM_FRAMES == 4 + +const unsigned char status_screen0_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + +const unsigned char status_screen1_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + +const unsigned char status_screen2_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + + +const unsigned char status_screen3_bmp[] PROGMEM = { + B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000, + B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000, + B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000, + B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000, + B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000, + B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000, + B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000, + B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000, + B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000, + B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000, + B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000, + B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000 +}; + + + #endif + +#else // HOTENDS >= 2 + + #if FAN_ANIM_FRAMES <= 2 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000 + }; + + #elif FAN_ANIM_FRAMES == 3 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111 + }; + + #elif FAN_ANIM_FRAMES == 4 + + const unsigned char status_screen0_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen1_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen2_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + const unsigned char status_screen3_bmp[] PROGMEM = { + B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000, + B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000, + B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000, + B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000, + B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000, + B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000, + B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000, + B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000, + B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000, + B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000, + B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000, + B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000 + }; + + #endif + +#endif // HOTENDS >= 2 diff --git a/Marlin/pins_RAMPS.h b/Marlin/pins_RAMPS.h index e886a616f6..fde7f3b5d4 100644 --- a/Marlin/pins_RAMPS.h +++ b/Marlin/pins_RAMPS.h @@ -422,7 +422,12 @@ #endif #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 49 + + #else + #define SD_DETECT_PIN -1 + #endif #define KILL_PIN 41 #if ENABLED(BQ_LCD_SMART_CONTROLLER) @@ -434,8 +439,12 @@ #define BTN_EN1 64 #define BTN_EN2 59 #define BTN_ENC 63 - #define SD_DETECT_PIN 42 - + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 42 + #else + #define SD_DETECT_PIN -1 + #endif + #elif ENABLED(LCD_I2C_PANELOLU2) #define BTN_EN1 47 @@ -450,7 +459,7 @@ #define BTN_EN2 7 // 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13. #define BTN_ENC -1 - #define LCD_SDSS SDSS + #define LCD_SDSS 53 #define SD_DETECT_PIN 49 #elif ENABLED(VIKI2) || ENABLED(miniVIKI) @@ -467,7 +476,8 @@ #define BTN_EN2 7 #define BTN_ENC 39 - #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board + #define SDSS 53 + #define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board #define KILL_PIN 31 #elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER) @@ -482,8 +492,12 @@ #define BTN_EN2 37 #define BTN_ENC 31 - #define LCD_SDSS SDSS - #define SD_DETECT_PIN 49 + #define LCD_SDSS 53 + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 49 + #else + #define SD_DETECT_PIN -1 + #endif #define KILL_PIN 41 #elif ENABLED(MKS_MINI_12864) // Added in Marlin 1.1.6 @@ -506,9 +520,14 @@ #define BTN_EN2 33 #define BTN_ENC 35 - #define SD_DETECT_PIN 49 + #define SDSS 53 + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 49 + #else + #define SD_DETECT_PIN -1 + #endif #define KILL_PIN 64 - + #elif ENABLED(MINIPANEL) #define BEEPER_PIN 42 @@ -528,10 +547,14 @@ #define BTN_EN1 40 #define BTN_EN2 63 #define BTN_ENC 59 - - #define SD_DETECT_PIN 49 + #define SDSS 53 + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 49 + #else + #define SD_DETECT_PIN -1 + #endif #define KILL_PIN 64 - + #elif ENABLED(ZONESTAR_LCD) #define ADC_KEYPAD_PIN 12 @@ -560,8 +583,13 @@ #endif #if ENABLED(G3D_PANEL) - #define SD_DETECT_PIN 49 - #define KILL_PIN 41 + #if(ENABLED(BoardRev2)) + #define SD_DETECT_PIN 49 + #else + #define SD_DETECT_PIN -1 + #endif + #define KILL_PIN 41 + #endif #endif