diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index 31b2768f7d..4b2025e37f 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -22,7 +22,7 @@
#pragma once
// If you have a trex 3, stock is this option plus 2208 on all axis. None in spreadcycle.
-//#define TREX3
+#define TREX3
//#define X_2208
//#define X_Spreadcycle
@@ -35,9 +35,9 @@
//#define E_2208 // Not Recommended! Stealthchop mode faults with linear advance
//#define E_Spreadcycle
-//#define BedAC
+#define BedAC
-//#define tallVersion
+#define tallVersion
/*
* Enables a filament sensor plugged into the laser pin. Disables the laser
@@ -110,7 +110,7 @@
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
// build by the user have been successfully uploaded into firmware.
-#define STRING_CONFIG_H_AUTHOR "TinyMachines3D" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "Vivedino" // Who made the changes.
#define SHOW_BOOTSCREEN
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
@@ -179,9 +179,9 @@
// Optional custom name for your RepStrap or other custom machine
// Displayed in the LCD "Ready" message
#if ENABLED(TREX3)
- #define CUSTOM_MACHINE_NAME "TM3D T-REX 3"
+ #define CUSTOM_MACHINE_NAME "T-REX 3"
#else
- #define CUSTOM_MACHINE_NAME "TM3D T-REX 2+"
+ #define CUSTOM_MACHINE_NAME "T-REX 2+"
#endif
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
@@ -429,8 +429,13 @@
// When temperature exceeds max temp, your heater will be switched off.
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
// You should use MINTEMP for thermistor short/failure protection.
-#define HEATER_0_MAXTEMP 410
-#define HEATER_1_MAXTEMP 275
+#if ENABLED(TREX3)
+ #define HEATER_0_MAXTEMP 350
+ #define HEATER_1_MAXTEMP 350
+#else
+ #define HEATER_0_MAXTEMP 410
+ #define HEATER_1_MAXTEMP 295
+#endif
#define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
@@ -911,7 +916,7 @@
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle]
#endif
// Certain types of probes need to stay away from edges
-#define MIN_PROBE_EDGE 3
+#define MIN_PROBE_EDGE 1
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 8000
@@ -2037,8 +2042,9 @@
// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
// is too low, you should also increment SOFT_PWM_SCALE.
-//#define FAN_SOFT_PWM
-
+#if ENABLED(TREX3)
+ #define FAN_SOFT_PWM
+#endif
// Incrementing this by 1 will double the software PWM frequency,
// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
// However, control resolution will be halved for each increment;
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 1a2ac83020..53771d049f 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -219,8 +219,8 @@
*
* Define one or both of these to override the default 0-255 range.
*/
-#define FAN_MIN_PWM 64
-//#define FAN_MAX_PWM 255
+#define FAN_MIN_PWM 0
+#define FAN_MAX_PWM 255
// @section extruder
@@ -895,20 +895,20 @@
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
- #if( (X_PROBE_OFFSET_FROM_EXTRUDER + 10) > 0 )
- #define MESH_MIN_X (X_PROBE_OFFSET_FROM_EXTRUDER + 5)
+ #if( (X_PROBE_OFFSET_FROM_EXTRUDER + (MIN_PROBE_EDGE + MESH_INSET)) > 0 )
+ #define MESH_MIN_X (X_PROBE_OFFSET_FROM_EXTRUDER + MIN_PROBE_EDGE + MESH_INSET)
#else
#define MESH_MIN_X 10
#endif
#if( (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 10) < X_BED_SIZE)
- #define MESH_MAX_X (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 5)
+ #define MESH_MAX_X (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - (MIN_PROBE_EDGE + MESH_INSET))
#else
#define MESH_MAX_X (X_BED_SIZE - 10)
#endif
#if ( (Y_PROBE_OFFSET_FROM_EXTRUDER + 10) > 5 )
- #define MESH_MIN_Y (Y_PROBE_OFFSET_FROM_EXTRUDER + 10)
+ #define MESH_MIN_Y (Y_PROBE_OFFSET_FROM_EXTRUDER + MIN_PROBE_EDGE + MESH_INSET)
#else
#define MESH_MIN_Y 25
#endif
@@ -916,7 +916,7 @@
#if( (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 10) < Y_BED_SIZE)
#define MESH_MAX_Y (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 10)
#else
- #define MESH_MAX_Y (Y_BED_SIZE - 10)
+ #define MESH_MAX_Y (Y_BED_SIZE - Y_PROBE_OFFSET_FROM_EXTRUDER - (MIN_PROBE_EDGE + MESH_INSET))
#endif
#endif
@@ -1757,16 +1757,19 @@
#define USER_SCRIPT_RETURN // Return to status screen after a script
#define USER_DESC_1 "UBL Commission 1"
- #define USER_GCODE_1 "M502 \n M500 \n M501 \n T0 \n M190 S75 \n M106 S128 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
-
+ #if ENABLED(TREX3)
+ #define USER_GCODE_1 "M502 \n M500 \n M501 \n T0 \n M190 S75 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
+ #else
+ #define USER_GCODE_1 "M502 \n M500 \n M501 \n T0 \n M190 S75 \n M106 S128 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
+ #endif
#define USER_DESC_2 "UBL Commission 2"
#define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n T0 \n M106 S128 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
#define USER_DESC_3 "Prep for Z Adjust"
- #define USER_GCODE_3 "M190 75 \n T0 \n M106 S128 \n M104 225 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n"
+ #define USER_GCODE_3 "M190 75 \n T0 \n M106 S128 \n M104 225 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
#define USER_DESC_4 "Fill Mesh Points"
- #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n"
+ #define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n M117 3 Points Filled \n"
#define USER_DESC_5 "Run Mesh Validation"
#define USER_GCODE_5 "G26 \n"
diff --git a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
index 9139f1b8d8..c4b7966b68 100644
--- a/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
+++ b/Marlin/src/HAL/HAL_LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
@@ -80,20 +80,13 @@ static uint8_t rs_last_state = 255;
static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val) {
- if ( rs != rs_last_state) { // time to send a command/data byte
+ if (rs != rs_last_state) { // Time to send a command/data byte
rs_last_state = rs;
-
- if ( rs == 0 )
- /* command */
- spiSend(0x0F8);
- else
- /* data */
- spiSend(0x0FA);
-
- DELAY_US(40); // give the controller some time to process the data: 20 is bad, 30 is OK, 40 is safe
+ spiSend(rs ? 0x0FA : 0x0F8); // Send data or command
+ DELAY_US(40); // Give the controller some time: 20 is bad, 30 is OK, 40 is safe
}
- spiSend(val & 0x0F0);
+ spiSend(val & 0xF0);
spiSend(val << 4);
}
@@ -104,8 +97,8 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
u8g_SetPIOutput(u8g, U8G_PI_CS);
u8g_Delay(5);
spiBegin();
- spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
- u8g->pin_list[U8G_PI_A0_STATE] = 0; /* inital RS state: command mode */
+ spiInit(SPI_EIGHTH_SPEED); // ST7920 max speed is about 1.1 MHz
+ u8g->pin_list[U8G_PI_A0_STATE] = 0; // initial RS state: command mode
break;
case U8G_COM_MSG_STOP:
@@ -115,12 +108,12 @@ uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t ar
u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
break;
- case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+ case U8G_COM_MSG_ADDRESS: // Define cmd (arg_val = 0) or data mode (arg_val = 1)
u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
break;
case U8G_COM_MSG_CHIP_SELECT:
- u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); //note: the st7920 has an active high chip select
+ u8g_SetPILevel(u8g, U8G_PI_CS, arg_val); // Note: the ST7920 has an active high chip-select
break;
case U8G_COM_MSG_WRITE_BYTE:
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL.cpp
index 95dbb0a502..c70e386b60 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL.cpp
@@ -43,7 +43,7 @@
// --------------------------------------------------------------------------
#define __I
-#define __IO
+#define __IO volatile
typedef struct
{
__I uint32_t CPUID; /*!< Offset: 0x000 (R/ ) CPUID Base Register */
@@ -105,7 +105,7 @@ uint8 adc_pins[] = {
TEMP_0_PIN,
#endif
#if HAS_TEMP_ADC_1
- TEMP_1_PIN
+ TEMP_1_PIN,
#endif
#if HAS_TEMP_ADC_2
TEMP_2_PIN,
@@ -175,6 +175,24 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
// Public functions
// --------------------------------------------------------------------------
+//
+// Leave PA11/PA12 intact if USBSerial is not used
+//
+#if SERIAL_USB
+ namespace wirish { namespace priv {
+ #if SERIAL_PORT > 0
+ #if SERIAL_PORT2
+ #if SERIAL_PORT2 > 0
+ void board_setup_usb(void) {}
+ #endif
+ #else
+ void board_setup_usb(void) {}
+ #endif
+ #endif
+ } }
+#endif
+
+
void HAL_init(void) {
NVIC_SetPriorityGrouping(0x3);
}
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL.h b/Marlin/src/HAL/HAL_STM32F1/HAL.h
index e3c81ecb5b..cecdd0336e 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL.h
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL.h
@@ -47,10 +47,10 @@
#include "../shared/math_32bit.h"
#include "../shared/HAL_SPI.h"
-#include "fastio_Stm32f1.h"
-#include "watchdog_Stm32f1.h"
+#include "fastio_STM32F1.h"
+#include "watchdog_STM32F1.h"
-#include "HAL_timers_Stm32f1.h"
+#include "HAL_timers_STM32F1.h"
// --------------------------------------------------------------------------
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
index 60cdfbf2f3..9533dd0f0a 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_Servo_Stm32f1.cpp
@@ -29,7 +29,7 @@
uint8_t ServoCount; //=0
-#include "HAL_Servo_Stm32f1.h"
+#include "HAL_Servo_STM32F1.h"
//#include "Servo.h"
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.cpp
new file mode 100644
index 0000000000..372aa26e51
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.cpp
@@ -0,0 +1,267 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ * Copyright (C) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#ifdef __STM32F1__
+
+#include "HAL_sdio_STM32F1.h"
+
+SDIO_CardInfoTypeDef SdCard;
+
+bool SDIO_Init(void) {
+ uint32_t count = 0U;
+ SdCard.CardType = SdCard.CardVersion = SdCard.Class = SdCard.RelCardAdd = SdCard.BlockNbr = SdCard.BlockSize = SdCard.LogBlockNbr = SdCard.LogBlockSize = 0;
+
+ sdio_begin();
+ sdio_set_dbus_width(SDIO_CLKCR_WIDBUS_1BIT);
+
+ dma_init(SDIO_DMA_DEV);
+ dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+ dma_set_priority(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, DMA_PRIORITY_VERY_HIGH);
+
+ if (!SDIO_CmdGoIdleState()) return false;
+ if (!SDIO_CmdGoIdleState()) return false; /* Hotplugged cards tends to miss first CMD0, so give them a second chance. */
+
+ SdCard.CardVersion = SDIO_CmdOperCond() ? CARD_V2_X : CARD_V1_X;
+
+ do {
+ if (count++ == SDMMC_MAX_VOLT_TRIAL) return false;
+ SDIO_CmdAppOperCommand(SdCard.CardVersion == CARD_V2_X ? SDMMC_HIGH_CAPACITY : SDMMC_STD_CAPACITY);
+ } while ((SDIO_GetResponse(SDIO_RESP1) & 0x80000000) == 0);
+
+ SdCard.CardType = (SDIO_GetResponse(SDIO_RESP1) & SDMMC_HIGH_CAPACITY) ? CARD_SDHC_SDXC : CARD_SDSC;
+
+ if (!SDIO_CmdSendCID()) return false;
+ if (!SDIO_CmdSetRelAdd(&SdCard.RelCardAdd)) return false; /* Send CMD3 SET_REL_ADDR with argument 0. SD Card publishes its RCA. */
+ if (!SDIO_CmdSendCSD(SdCard.RelCardAdd << 16U)) return false;
+
+ SdCard.Class = (SDIO_GetResponse(SDIO_RESP2) >> 20U);
+
+ if (SdCard.CardType == CARD_SDHC_SDXC) {
+ SdCard.LogBlockNbr = SdCard.BlockNbr = (((SDIO_GetResponse(SDIO_RESP2) & 0x0000003FU) << 26U) | ((SDIO_GetResponse(SDIO_RESP3) & 0xFFFF0000U) >> 6U)) + 1024;
+ SdCard.LogBlockSize = SdCard.BlockSize = 512U;
+ }
+ else {
+ SdCard.BlockNbr = ((((SDIO_GetResponse(SDIO_RESP2) & 0x000003FFU) << 2U ) | ((SDIO_GetResponse(SDIO_RESP3) & 0xC0000000U) >> 30U)) + 1U) * (4U << ((SDIO_GetResponse(SDIO_RESP3) & 0x00038000U) >> 15U));
+ SdCard.BlockSize = 1U << ((SDIO_GetResponse(SDIO_RESP2) >> 16) & 0x0FU);
+ SdCard.LogBlockNbr = (SdCard.BlockNbr) * ((SdCard.BlockSize) / 512U);
+ SdCard.LogBlockSize = 512U;
+ }
+
+ if (!SDIO_CmdSelDesel(SdCard.RelCardAdd << 16U)) return false;
+ if (!SDIO_CmdAppSetClearCardDetect(SdCard.RelCardAdd << 16U)) return false;
+ if (!SDIO_CmdAppSetBusWidth(SdCard.RelCardAdd << 16U, 2)) return false;
+
+ sdio_set_dbus_width(SDIO_CLKCR_WIDBUS_4BIT);
+ sdio_set_clock(SDIO_CLOCK);
+ return true;
+}
+
+bool SDIO_ReadBlock(uint32_t blockAddress, uint8_t *data) {
+ if (SDIO_GetCardState() != SDIO_CARD_TRANSFER) return false;
+ if (blockAddress >= SdCard.LogBlockNbr) return false;
+ if ((0x03 & (uint32_t)data)) return false; // misaligned data
+
+ if (SdCard.CardType != CARD_SDHC_SDXC) { blockAddress *= 512U; }
+
+ dma_setup_transfer(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, &SDIO->FIFO, DMA_SIZE_32BITS, data, DMA_SIZE_32BITS, DMA_MINC_MODE);
+ dma_set_num_transfers(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, 128);
+ dma_clear_isr_bits(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+ dma_enable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+
+ sdio_setup_transfer(SDIO_DATA_TIMEOUT * (F_CPU / 1000U), 512, SDIO_BLOCKSIZE_512 | SDIO_DCTRL_DMAEN | SDIO_DCTRL_DTEN | SDIO_DIR_RX);
+
+ if (!SDIO_CmdReadSingleBlock(blockAddress)) {
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+ return false;
+ }
+
+ while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) {}
+
+ dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+
+ if (SDIO_GET_FLAG(SDIO_STA_TRX_ERROR_FLAGS)) {
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
+ return false;
+ }
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
+ return true;
+}
+
+bool SDIO_WriteBlock(uint32_t blockAddress, const uint8_t *data) {
+ if (SDIO_GetCardState() != SDIO_CARD_TRANSFER) return false;
+ if (blockAddress >= SdCard.LogBlockNbr) return false;
+ if ((0x03 & (uint32_t)data)) return false; // misaligned data
+
+ if (SdCard.CardType != CARD_SDHC_SDXC) { blockAddress *= 512U; }
+
+ dma_setup_transfer(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, &SDIO->FIFO, DMA_SIZE_32BITS, (volatile void *) data, DMA_SIZE_32BITS, DMA_MINC_MODE | DMA_FROM_MEM);
+ dma_set_num_transfers(SDIO_DMA_DEV, SDIO_DMA_CHANNEL, 128);
+ dma_clear_isr_bits(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+ dma_enable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+
+ if (!SDIO_CmdWriteSingleBlock(blockAddress)) {
+ dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+ return false;
+ }
+
+ sdio_setup_transfer(SDIO_DATA_TIMEOUT * (F_CPU / 1000U), 512U, SDIO_BLOCKSIZE_512 | SDIO_DCTRL_DMAEN | SDIO_DCTRL_DTEN);
+
+ while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) {}
+
+ dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
+
+ if (SDIO_GET_FLAG(SDIO_STA_TRX_ERROR_FLAGS)) {
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
+ return false;
+ }
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
+
+ uint32 timeout = millis() + SDIO_WRITE_TIMEOUT;
+ while (timeout > millis()) {
+ if (SDIO_GetCardState() == SDIO_CARD_TRANSFER) {
+ return true;
+ }
+ }
+ return false;
+}
+
+inline uint32_t SDIO_GetCardState(void) { return SDIO_CmdSendStatus(SdCard.RelCardAdd << 16U) ? (SDIO_GetResponse(SDIO_RESP1) >> 9U) & 0x0FU : SDIO_CARD_ERROR; }
+
+// --------------------------------------------------------------------------
+// SD Commands and Responses
+// --------------------------------------------------------------------------
+
+void SDIO_SendCommand(uint16_t command, uint32_t argument) { SDIO->ARG = argument; SDIO->CMD = (uint32_t)(SDIO_CMD_CPSMEN | command); }
+uint8_t SDIO_GetCommandResponse(void) { return (uint8_t)(SDIO->RESPCMD); }
+uint32_t SDIO_GetResponse(uint32_t response) { return SDIO->RESP[response]; }
+
+bool SDIO_CmdGoIdleState(void) { SDIO_SendCommand(CMD0_GO_IDLE_STATE, 0); return SDIO_GetCmdError(); }
+bool SDIO_CmdSendCID(void) { SDIO_SendCommand(CMD2_ALL_SEND_CID, 0); return SDIO_GetCmdResp2(); }
+bool SDIO_CmdSetRelAdd(uint32_t *rca) { SDIO_SendCommand(CMD3_SET_REL_ADDR, 0); return SDIO_GetCmdResp6(SDMMC_CMD_SET_REL_ADDR, rca); }
+bool SDIO_CmdSelDesel(uint32_t address) { SDIO_SendCommand(CMD7_SEL_DESEL_CARD, address); return SDIO_GetCmdResp1(SDMMC_CMD_SEL_DESEL_CARD); }
+bool SDIO_CmdOperCond(void) { SDIO_SendCommand(CMD8_HS_SEND_EXT_CSD, SDMMC_CHECK_PATTERN); return SDIO_GetCmdResp7(); }
+bool SDIO_CmdSendCSD(uint32_t argument) { SDIO_SendCommand(CMD9_SEND_CSD, argument); return SDIO_GetCmdResp2(); }
+bool SDIO_CmdSendStatus(uint32_t argument) { SDIO_SendCommand(CMD13_SEND_STATUS, argument); return SDIO_GetCmdResp1(SDMMC_CMD_SEND_STATUS); }
+bool SDIO_CmdReadSingleBlock(uint32_t address) { SDIO_SendCommand(CMD17_READ_SINGLE_BLOCK, address); return SDIO_GetCmdResp1(SDMMC_CMD_READ_SINGLE_BLOCK); }
+bool SDIO_CmdWriteSingleBlock(uint32_t address) { SDIO_SendCommand(CMD24_WRITE_SINGLE_BLOCK, address); return SDIO_GetCmdResp1(SDMMC_CMD_WRITE_SINGLE_BLOCK); }
+bool SDIO_CmdAppCommand(uint32_t rsa) { SDIO_SendCommand(CMD55_APP_CMD, rsa); return SDIO_GetCmdResp1(SDMMC_CMD_APP_CMD); }
+
+bool SDIO_CmdAppSetBusWidth(uint32_t rsa, uint32_t argument) {
+ if (!SDIO_CmdAppCommand(rsa)) return false;
+ SDIO_SendCommand(ACMD6_APP_SD_SET_BUSWIDTH, argument);
+ return SDIO_GetCmdResp2();
+}
+
+bool SDIO_CmdAppOperCommand(uint32_t sdType) {
+ if (!SDIO_CmdAppCommand(0)) return false;
+ SDIO_SendCommand(ACMD41_SD_APP_OP_COND , SDMMC_VOLTAGE_WINDOW_SD | sdType);
+ return SDIO_GetCmdResp3();
+}
+
+bool SDIO_CmdAppSetClearCardDetect(uint32_t rsa) {
+ if (!SDIO_CmdAppCommand(rsa)) return false;
+ SDIO_SendCommand(ACMD42_SD_APP_SET_CLR_CARD_DETECT, 0);
+ return SDIO_GetCmdResp2();
+}
+
+// Wait until given flags are unset or till timeout
+#define SDIO_WAIT(FLAGS) do{ \
+ uint32_t count = 1 + (SDIO_CMDTIMEOUT) * ((F_CPU) / 8U / 1000U); \
+ do { if (!--count) return false; } while (!SDIO_GET_FLAG(FLAGS)); \
+}while(0)
+
+bool SDIO_GetCmdError(void) {
+ SDIO_WAIT(SDIO_STA_CMDSENT);
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ return true;
+}
+
+bool SDIO_GetCmdResp1(uint8_t command) {
+ SDIO_WAIT(SDIO_STA_CCRCFAIL | SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT);
+
+ if (SDIO_GET_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT)) {
+ SDIO_CLEAR_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT);
+ return false;
+ }
+ if (SDIO_GetCommandResponse() != command) return false;
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ return (SDIO_GetResponse(SDIO_RESP1) & SDMMC_OCR_ERRORBITS) == SDMMC_ALLZERO;
+}
+
+bool SDIO_GetCmdResp2(void) {
+ SDIO_WAIT(SDIO_STA_CCRCFAIL | SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT);
+
+ if (SDIO_GET_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT)) {
+ SDIO_CLEAR_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT);
+ return false;
+ }
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ return true;
+}
+
+bool SDIO_GetCmdResp3(void) {
+ SDIO_WAIT(SDIO_STA_CCRCFAIL | SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT);
+
+ if (SDIO_GET_FLAG(SDIO_STA_CTIMEOUT)) {
+ SDIO_CLEAR_FLAG(SDIO_STA_CTIMEOUT);
+ return false;
+ }
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ return true;
+}
+
+bool SDIO_GetCmdResp6(uint8_t command, uint32_t *rca) {
+ SDIO_WAIT(SDIO_STA_CCRCFAIL | SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT);
+
+ if (SDIO_GET_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT)) {
+ SDIO_CLEAR_FLAG(SDIO_STA_CCRCFAIL | SDIO_STA_CTIMEOUT);
+ return false;
+ }
+ if (SDIO_GetCommandResponse() != command) return false;
+
+ SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
+ if (SDIO_GetResponse(SDIO_RESP1) & (SDMMC_R6_GENERAL_UNKNOWN_ERROR | SDMMC_R6_ILLEGAL_CMD | SDMMC_R6_COM_CRC_FAILED)) return false;
+
+ *rca = SDIO_GetResponse(SDIO_RESP1) >> 16;
+ return true;
+}
+
+bool SDIO_GetCmdResp7(void) {
+ SDIO_WAIT(SDIO_STA_CCRCFAIL | SDIO_STA_CMDREND | SDIO_STA_CTIMEOUT);
+
+ if (SDIO_GET_FLAG(SDIO_STA_CTIMEOUT)) {
+ SDIO_CLEAR_FLAG(SDIO_STA_CTIMEOUT);
+ return false;
+ }
+
+ if (SDIO_GET_FLAG(SDIO_STA_CMDREND)) { SDIO_CLEAR_FLAG(SDIO_STA_CMDREND); }
+ return true;
+}
+
+#endif // __STM32F1__
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.h b/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.h
new file mode 100644
index 0000000000..034bd6d88a
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_sdio_STM32F1.h
@@ -0,0 +1,152 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
+ * Copyright (c) 2017 Victor Perez
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+// --------------------------------------------------------------------------
+// Includes
+// --------------------------------------------------------------------------
+
+#include "Arduino.h"
+#include "libmaple/sdio.h"
+#include "libmaple/dma.h"
+
+// --------------------------------------------------------------------------
+// Defines
+// --------------------------------------------------------------------------
+
+#define SDMMC_CMD_GO_IDLE_STATE ((uint8_t)0) /* Resets the SD memory card. */
+#define SDMMC_CMD_ALL_SEND_CID ((uint8_t)2) /* Asks any card connected to the host to send the CID numbers on the CMD line. */
+#define SDMMC_CMD_SET_REL_ADDR ((uint8_t)3) /* Asks the card to publish a new relative address (RCA). */
+#define SDMMC_CMD_SEL_DESEL_CARD ((uint8_t)7) /* Selects the card by its own relative address and gets deselected by any other address */
+#define SDMMC_CMD_HS_SEND_EXT_CSD ((uint8_t)8) /* Sends SD Memory Card interface condition, which includes host supply voltage information and asks the card whether card supports voltage. */
+#define SDMMC_CMD_SEND_CSD ((uint8_t)9) /* Addressed card sends its card specific data (CSD) on the CMD line. */
+#define SDMMC_CMD_SEND_STATUS ((uint8_t)13) /*!< Addressed card sends its status register. */
+#define SDMMC_CMD_READ_SINGLE_BLOCK ((uint8_t)17) /* Reads single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */
+#define SDMMC_CMD_WRITE_SINGLE_BLOCK ((uint8_t)24) /* Writes single block of size selected by SET_BLOCKLEN in case of SDSC, and a block of fixed 512 bytes in case of SDHC and SDXC. */
+#define SDMMC_CMD_APP_CMD ((uint8_t)55) /* Indicates to the card that the next command is an application specific command rather than a standard command. */
+
+#define SDMMC_ACMD_APP_SD_SET_BUSWIDTH ((uint8_t)6) /* (ACMD6) Defines the data bus width to be used for data transfer. The allowed data bus widths are given in SCR register. */
+#define SDMMC_ACMD_SD_APP_OP_COND ((uint8_t)41) /* (ACMD41) Sends host capacity support information (HCS) and asks the accessed card to send its operating condition register (OCR) content in the response on the CMD line. */
+#define SDMMC_ACMD_SD_APP_SET_CLR_CARD_DETECT ((uint8_t)42) /* (ACMD42) Connect/Disconnect the 50 KOhm pull-up resistor on CD/DAT3 (pin 1) of the card */
+
+#define CMD0_GO_IDLE_STATE (uint16_t)(SDMMC_CMD_GO_IDLE_STATE | SDIO_CMD_WAIT_NO_RESP)
+#define CMD2_ALL_SEND_CID (uint16_t)(SDMMC_CMD_ALL_SEND_CID | SDIO_CMD_WAIT_LONG_RESP)
+#define CMD3_SET_REL_ADDR (uint16_t)(SDMMC_CMD_SET_REL_ADDR | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD7_SEL_DESEL_CARD (uint16_t)(SDMMC_CMD_SEL_DESEL_CARD | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD8_HS_SEND_EXT_CSD (uint16_t)(SDMMC_CMD_HS_SEND_EXT_CSD | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD9_SEND_CSD (uint16_t)(SDMMC_CMD_SEND_CSD | SDIO_CMD_WAIT_LONG_RESP)
+#define CMD13_SEND_STATUS (uint16_t)(SDMMC_CMD_SEND_STATUS | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD17_READ_SINGLE_BLOCK (uint16_t)(SDMMC_CMD_READ_SINGLE_BLOCK | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD24_WRITE_SINGLE_BLOCK (uint16_t)(SDMMC_CMD_WRITE_SINGLE_BLOCK | SDIO_CMD_WAIT_SHORT_RESP)
+#define CMD55_APP_CMD (uint16_t)(SDMMC_CMD_APP_CMD | SDIO_CMD_WAIT_SHORT_RESP)
+
+#define ACMD6_APP_SD_SET_BUSWIDTH (uint16_t)(SDMMC_ACMD_APP_SD_SET_BUSWIDTH | SDIO_CMD_WAIT_SHORT_RESP)
+#define ACMD41_SD_APP_OP_COND (uint16_t)(SDMMC_ACMD_SD_APP_OP_COND | SDIO_CMD_WAIT_SHORT_RESP)
+#define ACMD42_SD_APP_SET_CLR_CARD_DETECT (uint16_t)(SDMMC_ACMD_SD_APP_SET_CLR_CARD_DETECT | SDIO_CMD_WAIT_SHORT_RESP)
+
+
+#define SDMMC_ALLZERO 0x00000000U
+#define SDMMC_OCR_ERRORBITS 0xFDFFE008U
+
+#define SDMMC_R6_GENERAL_UNKNOWN_ERROR 0x00002000U
+#define SDMMC_R6_ILLEGAL_CMD 0x00004000U
+#define SDMMC_R6_COM_CRC_FAILED 0x00008000U
+
+#define SDMMC_VOLTAGE_WINDOW_SD 0x80100000U
+#define SDMMC_HIGH_CAPACITY 0x40000000U
+#define SDMMC_STD_CAPACITY 0x00000000U
+#define SDMMC_CHECK_PATTERN 0x000001AAU
+
+#define SDIO_TRANSFER_MODE_BLOCK 0x00000000U
+#define SDIO_DPSM_ENABLE 0x00000001U
+#define SDIO_TRANSFER_DIR_TO_CARD 0x00000000U
+#define SDIO_DATABLOCK_SIZE_512B 0x00000090U
+#define SDIO_TRANSFER_DIR_TO_SDIO 0x00000100U
+#define SDIO_DMA_ENABLE 0x00001000U
+
+#define CARD_V1_X 0x00000000U
+#define CARD_V2_X 0x00000001U
+#define CARD_SDSC 0x00000000U
+#define CARD_SDHC_SDXC 0x00000001U
+
+#define SDIO_RESP1 0
+#define SDIO_RESP2 1
+#define SDIO_RESP3 2
+#define SDIO_RESP4 3
+
+#define SDIO_GET_FLAG(__FLAG__) !!((SDIO->STA) & (__FLAG__))
+#define SDIO_CLEAR_FLAG(__FLAG__) (SDIO->ICR = (__FLAG__))
+
+#define SDMMC_MAX_VOLT_TRIAL 0x00000FFFU
+#define SDIO_CARD_TRANSFER 0x00000004U /* Card is in transfer state */
+#define SDIO_CARD_ERROR 0x000000FFU /* Card response Error */
+#define SDIO_CMDTIMEOUT 200U /* Command send and response timeout */
+#define SDIO_DATA_TIMEOUT 100U /* Read data transfer timeout */
+#define SDIO_WRITE_TIMEOUT 200U /* Write data transfer timeout */
+
+#define SDIO_CLOCK 18000000 /* 18 MHz */
+
+// --------------------------------------------------------------------------
+// Types
+// --------------------------------------------------------------------------
+
+typedef struct {
+ uint32_t CardType; // Card Type
+ uint32_t CardVersion; // Card version
+ uint32_t Class; // Class of the card class
+ uint32_t RelCardAdd; // Relative Card Address
+ uint32_t BlockNbr; // Card Capacity in blocks
+ uint32_t BlockSize; // One block size in bytes
+ uint32_t LogBlockNbr; // Card logical Capacity in blocks
+ uint32_t LogBlockSize; // Logical block size in bytes
+} SDIO_CardInfoTypeDef;
+
+// --------------------------------------------------------------------------
+// Public functions
+// --------------------------------------------------------------------------
+
+inline uint32_t SDIO_GetCardState(void);
+
+bool SDIO_CmdGoIdleState(void);
+bool SDIO_CmdSendCID(void);
+bool SDIO_CmdSetRelAdd(uint32_t *rca);
+bool SDIO_CmdSelDesel(uint32_t address);
+bool SDIO_CmdOperCond(void);
+bool SDIO_CmdSendCSD(uint32_t argument);
+bool SDIO_CmdSendStatus(uint32_t argument);
+bool SDIO_CmdReadSingleBlock(uint32_t address);
+bool SDIO_CmdWriteSingleBlock(uint32_t address);
+bool SDIO_CmdAppCommand(uint32_t rsa);
+
+bool SDIO_CmdAppSetBusWidth(uint32_t rsa, uint32_t argument);
+bool SDIO_CmdAppOperCommand(uint32_t sdType);
+bool SDIO_CmdAppSetClearCardDetect(uint32_t rsa);
+
+void SDIO_SendCommand(uint16_t command, uint32_t argument);
+uint8_t SDIO_GetCommandResponse(void);
+uint32_t SDIO_GetResponse(uint32_t response);
+bool SDIO_GetCmdError(void);
+bool SDIO_GetCmdResp1(uint8_t command);
+bool SDIO_GetCmdResp2(void);
+bool SDIO_GetCmdResp3(void);
+bool SDIO_GetCmdResp6(uint8_t command, uint32_t *rca);
+bool SDIO_GetCmdResp7(void);
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
index 02314a346c..c2e09cf11c 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_spi_Stm32f1.cpp
@@ -104,7 +104,7 @@ void spiInit(uint8_t spiRate) {
case SPI_SPEED_6: clock = SPI_CLOCK_DIV64; break;
default: clock = SPI_CLOCK_DIV2; // Default from the SPI library
}
- spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE3);
+ spiConfig = SPISettings(clock, MSBFIRST, SPI_MODE0);
SPI.begin();
}
diff --git a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
index 5c9f5e893e..f88e46bd18 100644
--- a/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/HAL_timers_Stm32f1.cpp
@@ -32,7 +32,7 @@
#include "HAL.h"
-#include "HAL_timers_Stm32f1.h"
+#include "HAL_timers_STM32F1.h"
// --------------------------------------------------------------------------
// Externals
diff --git a/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h b/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
index 40917f03fe..dcd72440d6 100644
--- a/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
+++ b/Marlin/src/HAL/HAL_STM32F1/SanityCheck.h
@@ -70,3 +70,7 @@
#if ENABLED(EMERGENCY_PARSER)
#error "EMERGENCY_PARSER is not yet implemented for STM32F1. Disable EMERGENCY_PARSER to continue."
#endif
+
+#if ENABLED(SDIO_SUPPORT) && DISABLED(SDSUPPORT)
+ #error "SDIO_SUPPORT requires SDSUPPORT. Enable SDSUPPORT to continue."
+#endif
diff --git a/Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py b/Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py
index 0610ce132a..ce5a066741 100644
--- a/Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py
+++ b/Marlin/src/HAL/HAL_STM32F1/stm32f1_flag_script.py
@@ -17,7 +17,7 @@ if __name__ == "__main__":
"--specs=nano.specs",
"--specs=nosys.specs",
- "-IMarlin/src/HAL",
+ "-IMarlin/src/HAL/HAL_STM32F1",
"-MMD",
"-MP",
diff --git a/Marlin/src/HAL/HAL_STM32F1/u8g_com_stm32duino_fsmc.cpp b/Marlin/src/HAL/HAL_STM32F1/u8g_com_stm32duino_fsmc.cpp
new file mode 100644
index 0000000000..de55f6c2ec
--- /dev/null
+++ b/Marlin/src/HAL/HAL_STM32F1/u8g_com_stm32duino_fsmc.cpp
@@ -0,0 +1,255 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * u8g_com_stm32duino_fsmc.cpp
+ *
+ * Communication interface for FSMC
+ */
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_GRAPHICAL_LCD
+#if defined(STM32F1) || defined(STM32F1xx)
+
+#include "U8glib.h"
+#include "libmaple/fsmc.h"
+#include "libmaple/gpio.h"
+#include "boards.h"
+
+#define LCD_READ_ID 0x04 /* Read display identification information */
+
+/* Timing configuration */
+#define FSMC_ADDRESS_SETUP_TIME 15 // AddressSetupTime
+#define FSMC_DATA_SETUP_TIME 15 // DataSetupTime
+
+void LCD_IO_Init(uint8_t cs, uint8_t rs);
+void LCD_IO_WriteData(uint16_t RegValue);
+void LCD_IO_WriteReg(uint8_t Reg);
+uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize);
+
+static uint8_t msgInitCount = 2; // Ignore all messages until 2nd U8G_COM_MSG_INIT
+
+uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+ if (msgInitCount) {
+ if (msg == U8G_COM_MSG_INIT) msgInitCount--;
+ if (msgInitCount) return -1;
+ }
+
+ static uint8_t isCommand;
+
+ switch(msg) {
+ case U8G_COM_MSG_STOP:
+ break;
+ case U8G_COM_MSG_INIT:
+ u8g_SetPIOutput(u8g, U8G_PI_RESET);
+
+ LCD_IO_Init(u8g->pin_list[U8G_PI_CS], u8g->pin_list[U8G_PI_A0]);
+ u8g_Delay(100);
+
+ if (arg_ptr != NULL)
+ *((uint32_t *)arg_ptr) = LCD_IO_ReadData(LCD_READ_ID, 3);
+
+ isCommand = 0;
+ break;
+
+ case U8G_COM_MSG_ADDRESS: // define cmd (arg_val = 0) or data mode (arg_val = 1)
+ isCommand = arg_val == 0 ? 1 : 0;
+ break;
+
+ case U8G_COM_MSG_RESET:
+ u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_BYTE:
+ if (isCommand)
+ LCD_IO_WriteReg(arg_val);
+ else
+ LCD_IO_WriteData((uint16_t)arg_val);
+ break;
+
+ case U8G_COM_MSG_WRITE_SEQ:
+
+ for (uint8_t i = 0; i < arg_val; i += 2)
+ LCD_IO_WriteData(*(uint16_t *)(((uint32_t)arg_ptr) + i));
+ break;
+ }
+ return 1;
+}
+
+/**
+ * FSMC LCD IO
+ */
+#define __ASM __asm
+#define __STATIC_INLINE static inline
+
+__attribute__((always_inline)) __STATIC_INLINE void __DSB(void) {
+ __ASM volatile ("dsb 0xF":::"memory");
+}
+
+#define FSMC_CS_NE1 PD7
+#define FSMC_CS_NE2 PG9
+#define FSMC_CS_NE3 PG10
+#define FSMC_CS_NE4 PG12
+
+#define FSMC_RS_A0 PF0
+#define FSMC_RS_A1 PF1
+#define FSMC_RS_A2 PF2
+#define FSMC_RS_A3 PF3
+#define FSMC_RS_A4 PF4
+#define FSMC_RS_A5 PF5
+#define FSMC_RS_A6 PF12
+#define FSMC_RS_A7 PF13
+#define FSMC_RS_A8 PF14
+#define FSMC_RS_A9 PF15
+#define FSMC_RS_A10 PG0
+#define FSMC_RS_A11 PG1
+#define FSMC_RS_A12 PG2
+#define FSMC_RS_A13 PG3
+#define FSMC_RS_A14 PG4
+#define FSMC_RS_A15 PG5
+#define FSMC_RS_A16 PD11
+#define FSMC_RS_A17 PD12
+#define FSMC_RS_A18 PD13
+#define FSMC_RS_A19 PE3
+#define FSMC_RS_A20 PE4
+#define FSMC_RS_A21 PE5
+#define FSMC_RS_A22 PE6
+#define FSMC_RS_A23 PE2
+#define FSMC_RS_A24 PG13
+#define FSMC_RS_A25 PG14
+
+static uint8_t fsmcInit = 0;
+
+typedef struct {
+ __IO uint16_t REG;
+ __IO uint16_t RAM;
+} LCD_CONTROLLER_TypeDef;
+
+LCD_CONTROLLER_TypeDef *LCD;
+
+void LCD_IO_Init(uint8_t cs, uint8_t rs) {
+ uint32_t controllerAddress;
+
+ if (fsmcInit) return;
+ fsmcInit = 1;
+
+ switch(cs) {
+ case FSMC_CS_NE1: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION1; break;
+ case FSMC_CS_NE2: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION2; break;
+ case FSMC_CS_NE3: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION3; break;
+ case FSMC_CS_NE4: controllerAddress = (uint32_t)FSMC_NOR_PSRAM_REGION4; break;
+ default: return;
+ }
+
+ #define _ORADDR(N) controllerAddress |= (_BV32(N) - 2)
+
+ switch(rs) {
+ case FSMC_RS_A0: _ORADDR( 1); break;
+ case FSMC_RS_A1: _ORADDR( 2); break;
+ case FSMC_RS_A2: _ORADDR( 3); break;
+ case FSMC_RS_A3: _ORADDR( 4); break;
+ case FSMC_RS_A4: _ORADDR( 5); break;
+ case FSMC_RS_A5: _ORADDR( 6); break;
+ case FSMC_RS_A6: _ORADDR( 7); break;
+ case FSMC_RS_A7: _ORADDR( 8); break;
+ case FSMC_RS_A8: _ORADDR( 9); break;
+ case FSMC_RS_A9: _ORADDR(10); break;
+ case FSMC_RS_A10: _ORADDR(11); break;
+ case FSMC_RS_A11: _ORADDR(12); break;
+ case FSMC_RS_A12: _ORADDR(13); break;
+ case FSMC_RS_A13: _ORADDR(14); break;
+ case FSMC_RS_A14: _ORADDR(15); break;
+ case FSMC_RS_A15: _ORADDR(16); break;
+ case FSMC_RS_A16: _ORADDR(17); break;
+ case FSMC_RS_A17: _ORADDR(18); break;
+ case FSMC_RS_A18: _ORADDR(19); break;
+ case FSMC_RS_A19: _ORADDR(20); break;
+ case FSMC_RS_A20: _ORADDR(21); break;
+ case FSMC_RS_A21: _ORADDR(22); break;
+ case FSMC_RS_A22: _ORADDR(23); break;
+ case FSMC_RS_A23: _ORADDR(24); break;
+ case FSMC_RS_A24: _ORADDR(25); break;
+ case FSMC_RS_A25: _ORADDR(26); break;
+ default: return;
+ }
+
+ rcc_clk_enable(RCC_FSMC);
+
+ gpio_set_mode(GPIOD, 14, GPIO_AF_OUTPUT_PP); // FSMC_D00
+ gpio_set_mode(GPIOD, 15, GPIO_AF_OUTPUT_PP); // FSMC_D01
+ gpio_set_mode(GPIOD, 0, GPIO_AF_OUTPUT_PP); // FSMC_D02
+ gpio_set_mode(GPIOD, 1, GPIO_AF_OUTPUT_PP); // FSMC_D03
+ gpio_set_mode(GPIOE, 7, GPIO_AF_OUTPUT_PP); // FSMC_D04
+ gpio_set_mode(GPIOE, 8, GPIO_AF_OUTPUT_PP); // FSMC_D05
+ gpio_set_mode(GPIOE, 9, GPIO_AF_OUTPUT_PP); // FSMC_D06
+ gpio_set_mode(GPIOE, 10, GPIO_AF_OUTPUT_PP); // FSMC_D07
+ gpio_set_mode(GPIOE, 11, GPIO_AF_OUTPUT_PP); // FSMC_D08
+ gpio_set_mode(GPIOE, 12, GPIO_AF_OUTPUT_PP); // FSMC_D09
+ gpio_set_mode(GPIOE, 13, GPIO_AF_OUTPUT_PP); // FSMC_D10
+ gpio_set_mode(GPIOE, 14, GPIO_AF_OUTPUT_PP); // FSMC_D11
+ gpio_set_mode(GPIOE, 15, GPIO_AF_OUTPUT_PP); // FSMC_D12
+ gpio_set_mode(GPIOD, 8, GPIO_AF_OUTPUT_PP); // FSMC_D13
+ gpio_set_mode(GPIOD, 9, GPIO_AF_OUTPUT_PP); // FSMC_D14
+ gpio_set_mode(GPIOD, 10, GPIO_AF_OUTPUT_PP); // FSMC_D15
+
+ gpio_set_mode(GPIOD, 4, GPIO_AF_OUTPUT_PP); // FSMC_NOE
+ gpio_set_mode(GPIOD, 5, GPIO_AF_OUTPUT_PP); // FSMC_NWE
+
+ gpio_set_mode(PIN_MAP[cs].gpio_device, PIN_MAP[cs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_CS_NEx
+ gpio_set_mode(PIN_MAP[rs].gpio_device, PIN_MAP[rs].gpio_bit, GPIO_AF_OUTPUT_PP); //FSMC_RS_Ax
+
+ FSMC_NOR_PSRAM4_BASE->BCR = FSMC_BCR_WREN | FSMC_BCR_MTYP_SRAM | FSMC_BCR_MWID_16BITS | FSMC_BCR_MBKEN;
+ FSMC_NOR_PSRAM4_BASE->BTR = (FSMC_DATA_SETUP_TIME << 8) | FSMC_ADDRESS_SETUP_TIME;
+
+ afio_remap(AFIO_REMAP_FSMC_NADV);
+
+ LCD = (LCD_CONTROLLER_TypeDef*)controllerAddress;
+}
+
+void LCD_IO_WriteData(uint16_t RegValue) {
+ LCD->RAM = RegValue;
+ __DSB();
+}
+
+void LCD_IO_WriteReg(uint8_t Reg) {
+ LCD->REG = (uint16_t)Reg;
+ __DSB();
+}
+
+uint32_t LCD_IO_ReadData(uint16_t RegValue, uint8_t ReadSize) {
+ volatile uint32_t data;
+ LCD->REG = (uint16_t)RegValue;
+ __DSB();
+
+ data = LCD->RAM; // dummy read
+ data = LCD->RAM & 0x00FF;
+
+ while (--ReadSize) {
+ data <<= 8;
+ data |= (LCD->RAM & 0x00FF);
+ }
+ return (uint32_t)data;
+}
+
+#endif // STM32F1 || STM32F1xx
+#endif // HAS_GRAPHICAL_LCD
diff --git a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp
index 101ad5ca5e..7a6ff7d020 100644
--- a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp
+++ b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.cpp
@@ -31,7 +31,14 @@
#if ENABLED(USE_WATCHDOG)
#include
-#include "watchdog_Stm32f1.h"
+#include "watchdog_STM32F1.h"
+
+void watchdog_reset() {
+ #if PIN_EXISTS(LED)
+ TOGGLE(LED_PIN); // heartbeat indicator
+ #endif
+ iwdg_feed();
+}
void watchdogSetup(void) {
// do whatever. don't remove this function.
diff --git a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
index d34efdc0a2..3d37cefc96 100644
--- a/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
+++ b/Marlin/src/HAL/HAL_STM32F1/watchdog_Stm32f1.h
@@ -27,8 +27,6 @@
#include
-#include "../../inc/MarlinConfig.h"
-
/**
* The watchdog clock is 40Khz. We need a 4 seconds interval, so use a /256 preescaler and
* 625 reload value (counts down to 0)
@@ -43,9 +41,4 @@ void watchdog_init();
// Reset watchdog. MUST be called at least every 4 seconds after the
// first watchdog_init or STM32F1 will reset.
-inline void watchdog_reset() {
- #if PIN_EXISTS(LED)
- TOGGLE(LED_PIN); // heart beat indicator
- #endif
- iwdg_feed();
-}
+void watchdog_reset();
diff --git a/Marlin/src/config/default/Configuration.h b/Marlin/src/config/default/Configuration.h
index 02e2b34412..6f722714ca 100644
--- a/Marlin/src/config/default/Configuration.h
+++ b/Marlin/src/config/default/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/default/Configuration_adv.h b/Marlin/src/config/default/Configuration_adv.h
index 1282cb6b10..f967e3af8b 100644
--- a/Marlin/src/config/default/Configuration_adv.h
+++ b/Marlin/src/config/default/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1389,10 +1388,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
index af008d7d49..23bd05f4bd 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 7
#define TEMP_SENSOR_1 0
@@ -688,6 +689,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -696,10 +705,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 10.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 10.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1881,6 +1893,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
index 906d4bc684..23d01597bc 100644
--- a/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
+++ b/Marlin/src/config/examples/AlephObjects/TAZ4/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
index 15157c90f1..e53f2fb10b 100644
--- a/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
+++ b/Marlin/src/config/examples/AliExpress/CL-260/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration.h b/Marlin/src/config/examples/Anet/A2/Configuration.h
index 1b4940ecac..b5094adb97 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1863,6 +1875,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
index 605b8021fb..b54b01bef8 100644
--- a/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration.h b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
index e139564f08..3dc67ec384 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1863,6 +1875,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
index 605b8021fb..b54b01bef8 100644
--- a/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A2plus/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration.h b/Marlin/src/config/examples/Anet/A6/Configuration.h
index 30db68481a..1c52d31f4a 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration.h
@@ -149,8 +149,8 @@
// :[1, 2, 3, 4, 5, 6]
#define EXTRUDERS 1
-// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
-#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
+// The Anet A6 original extruder is designed for 1.75mm
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
// For Cyclops or any "multi-extruder" that shares a single nozzle.
//#define SINGLENOZZLE
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 11
#define TEMP_SENSOR_1 0
@@ -713,6 +714,13 @@
//#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
//#define DEFAULT_TRAVEL_ACCELERATION 4000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
/**
* Default Jerk (mm/s)
@@ -724,10 +732,13 @@
*/
// ANET A6 Firmware V2.0 defaults (jerk):
// Vxy-jerk: 10, Vz-jerk: +000.30, Ve-jerk: 5
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -2016,6 +2027,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
index 127bf2ffac..76d212770a 100644
--- a/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A6/Configuration_adv.h
@@ -481,14 +481,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -603,6 +595,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1387,10 +1386,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration.h b/Marlin/src/config/examples/Anet/A8/Configuration.h
index 5a3c0b64ae..88dc9fbd9e 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration.h
@@ -306,6 +306,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -325,7 +326,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -439,9 +440,9 @@
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
*/
-//#define PIDTEMPBED
+#define PIDTEMPBED
-#define BED_LIMIT_SWITCHING
+//#define BED_LIMIT_SWITCHING
/**
* Max Bed Power
@@ -457,9 +458,9 @@
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
- #define DEFAULT_bedKp 10.00
- #define DEFAULT_bedKi .023
- #define DEFAULT_bedKd 305.4
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
//from pidautotune
@@ -467,6 +468,12 @@
//#define DEFAULT_bedKi 1.41
//#define DEFAULT_bedKd 1675.16
+ // ANET A8
+ // original Bed + 0.3mm Heat conducting into 4mm borosilicate (PID-Autotune: M303 E-1 S60 C5):
+ #define DEFAULT_bedKp 295.00
+ #define DEFAULT_bedKi 35.65
+ #define DEFAULT_bedKd 610.21
+
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
@@ -675,6 +682,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -683,10 +698,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1870,6 +1888,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
index 97a20d8ecf..fd7b207e1f 100644
--- a/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Anet/A8/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/ArmEd/Configuration.h b/Marlin/src/config/examples/ArmEd/Configuration.h
index ef9ae03d9e..72921111d2 100644
--- a/Marlin/src/config/examples/ArmEd/Configuration.h
+++ b/Marlin/src/config/examples/ArmEd/Configuration.h
@@ -316,6 +316,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -335,7 +336,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -680,6 +681,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -688,10 +697,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 1.5
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 1.5 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1873,6 +1885,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/ArmEd/Configuration_adv.h b/Marlin/src/config/examples/ArmEd/Configuration_adv.h
index 21c80ff053..567fee94c3 100644
--- a/Marlin/src/config/examples/ArmEd/Configuration_adv.h
+++ b/Marlin/src/config/examples/ArmEd/Configuration_adv.h
@@ -465,14 +465,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -576,6 +568,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1362,10 +1361,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
index cfe0d25972..ccc791f628 100644
--- a/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
+++ b/Marlin/src/config/examples/Azteeg/X5GT/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
index cbda6f7096..bbee93ffcc 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 7.0
-#define DEFAULT_YJERK 7.0
-#define DEFAULT_ZJERK 0.65
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 7.0
+ #define DEFAULT_YJERK 7.0
+ #define DEFAULT_ZJERK 0.65
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
index d91a09291b..b09d0f0318 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
@@ -481,14 +481,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -603,6 +595,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1387,10 +1386,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
index a3942f0a32..4f4346a6d1 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 5
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1100 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 7.0
-#define DEFAULT_YJERK 7.0
-#define DEFAULT_ZJERK 0.65
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 7.0
+ #define DEFAULT_YJERK 7.0
+ #define DEFAULT_ZJERK 0.65
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
index 0e6a9d2458..7665603f5a 100644
--- a/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
+++ b/Marlin/src/config/examples/BIBO/TouchX/default/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
index a558b1078d..eb29efce1c 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -656,6 +657,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -664,10 +673,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1849,6 +1861,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
index 3c03260d3a..52f500373f 100644
--- a/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
index 62fc55ddd5..34088b6523 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration.h
@@ -313,6 +313,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -332,7 +333,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 70
#define TEMP_SENSOR_1 0
@@ -669,6 +670,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1300 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -677,10 +686,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 5.0
-#define DEFAULT_YJERK 5.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 10.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 5.0
+ #define DEFAULT_YJERK 5.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 10.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
index 0c934e265c..9ca511558d 100644
--- a/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/Hephestos_2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -612,6 +604,13 @@
#define ENCODER_100X_STEPS_PER_SEC 50 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1396,10 +1395,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
index 69f16ca87c..4903a06954 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -656,6 +657,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -664,10 +673,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1849,6 +1861,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
index 3c03260d3a..52f500373f 100644
--- a/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
+++ b/Marlin/src/config/examples/BQ/WITBOX/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Cartesio/Configuration.h b/Marlin/src/config/examples/Cartesio/Configuration.h
index 769a5903ca..1dfb0729ab 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration.h
@@ -306,6 +306,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -325,7 +326,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 -1
@@ -667,6 +668,14 @@
#define DEFAULT_RETRACT_ACCELERATION 10000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -675,10 +684,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1860,6 +1872,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Cartesio/Configuration_adv.h b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
index 99ccacbd23..2c59a56eb1 100644
--- a/Marlin/src/config/examples/Cartesio/Configuration_adv.h
+++ b/Marlin/src/config/examples/Cartesio/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration.h b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
index 7107873384..0d14cb0f3d 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -678,6 +679,14 @@
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -686,10 +695,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 2.7
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 2.7
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1871,6 +1883,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
index 74b539e537..03f338d844 100644
--- a/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
index 500d2defe2..8dc44c8a1b 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 800 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1862,6 +1874,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
index 1fa49dfea1..eab72fa557 100644
--- a/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10S/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
index 2afa3d2793..537b644a32 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration.h
@@ -314,6 +314,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -333,7 +334,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -687,6 +688,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -695,10 +704,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1880,6 +1892,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
index e408ac17dd..1c62a991fa 100644
--- a/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-10mini/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration.h b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
index efafbad662..ffa28d181e 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -678,6 +679,14 @@
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -686,10 +695,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 20.0
-#define DEFAULT_YJERK 20.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1871,6 +1883,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
index 7a659fb581..b9c3fb29cf 100644
--- a/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/CR-8/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
index 7a61412ff4..0aaffdb3e2 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -672,6 +673,14 @@
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -680,10 +689,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
index a48415953d..db4b299071 100644
--- a/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
index 33838e2564..cc7e3c6cd4 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -672,6 +673,14 @@
#define DEFAULT_RETRACT_ACCELERATION 500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -680,10 +689,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -927,8 +939,8 @@
// @section machine
// The size of the print bed
-#define X_BED_SIZE 220
-#define Y_BED_SIZE 220
+#define X_BED_SIZE 235
+#define Y_BED_SIZE 235
// Travel limits (mm) after homing, corresponding to endstop positions.
#define X_MIN_POS 0
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
index e45104e2a9..2fe958e9ae 100644
--- a/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-3/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
index 170e811a29..5e56e80dab 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -678,6 +679,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -686,10 +695,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 20.0
-#define DEFAULT_YJERK 20.0
-#define DEFAULT_ZJERK 2.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 2.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1871,6 +1883,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
index 87bad6a855..0b9d005488 100644
--- a/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
+++ b/Marlin/src/config/examples/Creality/Ender-4/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration.h b/Marlin/src/config/examples/Einstart-S/Configuration.h
index c46a7caf77..efab082def 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -326,7 +327,7 @@
*
* 666 : Custom table generated for 200K thermistor with 10k pullup on Einstart S
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 666
#define TEMP_SENSOR_1 0
@@ -680,6 +681,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -688,10 +697,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1867,6 +1879,15 @@
//
#define U8GLIB_SH1106_EINSTART
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
index 989153ed3b..bedbed1988 100644
--- a/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
+++ b/Marlin/src/config/examples/Einstart-S/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Felix/Configuration.h b/Marlin/src/config/examples/Felix/Configuration.h
index f73c01e9f3..4a6425cdba 100644
--- a/Marlin/src/config/examples/Felix/Configuration.h
+++ b/Marlin/src/config/examples/Felix/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -650,6 +651,14 @@
#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -658,10 +667,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1843,6 +1855,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Felix/Configuration_adv.h b/Marlin/src/config/examples/Felix/Configuration_adv.h
index 895d76af3d..ff2d135ef6 100644
--- a/Marlin/src/config/examples/Felix/Configuration_adv.h
+++ b/Marlin/src/config/examples/Felix/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Felix/DUAL/Configuration.h b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
index 99a78a7826..6e8fd2b48e 100644
--- a/Marlin/src/config/examples/Felix/DUAL/Configuration.h
+++ b/Marlin/src/config/examples/Felix/DUAL/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
@@ -650,6 +651,14 @@
#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -658,10 +667,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1843,6 +1855,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
index 01fce86e55..c25ad304a0 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -674,6 +675,14 @@
#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -682,10 +691,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.5
-#define DEFAULT_YJERK 8.5
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 4.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.5
+ #define DEFAULT_YJERK 8.5
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 4.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1867,6 +1879,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
index 18edf294a6..f43f192d40 100644
--- a/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
+++ b/Marlin/src/config/examples/FolgerTech/i3-2020/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration.h
index 0c66651413..87635af120 100644
--- a/Marlin/src/config/examples/Formbot/Raptor/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration.h
@@ -346,6 +346,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -365,7 +366,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -743,6 +744,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -751,19 +760,21 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#if ENABLED(X_SpreadCycle) || DISABLED(X_2208)
- #define DEFAULT_XJERK 20.0
-#else
- #define DEFAULT_XJERK 10.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #if ENABLED(X_SpreadCycle) || DISABLED(X_2208)
+ #define DEFAULT_XJERK 20.0
+ #else
+ #define DEFAULT_XJERK 10.0
+ #endif
+ #if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208)
+ #define DEFAULT_YJERK 10.0
+ #else
+ #define DEFAULT_YJERK 5.0
+ #endif
+ #define DEFAULT_ZJERK 0.4
#endif
-#if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208)
- #define DEFAULT_YJERK 10.0
-#else
- #define DEFAULT_YJERK 5.0
-#endif
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1967,6 +1978,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
index 486e1a59a0..f7ac06ccff 100644
--- a/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/Raptor/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
index 8549b18656..6f7b286c87 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration.h
@@ -314,6 +314,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -333,7 +334,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
@@ -675,7 +676,7 @@
* Override with M203
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
*/
-#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 }
+#define DEFAULT_MAX_FEEDRATE { 200, 100, 5, 25 }
/**
* Default Max Acceleration (change/s) change = mm/s
@@ -697,6 +698,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -705,10 +714,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 12.0 // More conservitive numbers.
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 12.0 // More conservative numbers.
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1896,6 +1908,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
index 3fdc0a4a99..8f97353b6c 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_2+/Configuration_adv.h
@@ -486,14 +486,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -608,6 +600,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1393,10 +1392,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
index 073f0a2195..c0f52b2a7a 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration.h
@@ -309,6 +309,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -328,7 +329,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
@@ -684,6 +685,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -692,15 +701,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-//#define DEFAULT_XJERK 20.0
-//#define DEFAULT_YJERK 10.0
-//#define DEFAULT_ZJERK 0.4
-//#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 12.0 // More conservative numbers.
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.4
+#endif
-#define DEFAULT_XJERK 12.0 // More conservitive numbers.
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1894,6 +1901,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
index cb079dd8a5..a4c371cbe6 100644
--- a/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
+++ b/Marlin/src/config/examples/Formbot/T_Rex_3/Configuration_adv.h
@@ -487,14 +487,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -609,6 +601,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1393,10 +1392,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
index 93509a7c4f..d789606957 100644
--- a/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/GT2560/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -683,6 +684,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -691,10 +700,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 4.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1876,6 +1888,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
index fec925dbf6..c1225b9c8b 100644
--- a/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/I3_Pro_X-GT2560/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 5.0
-#define DEFAULT_YJERK 5.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 4.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 5.0
+ #define DEFAULT_YJERK 5.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 4.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
index 39d893dc93..8d51028303 100644
--- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -675,6 +676,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 2000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -683,10 +692,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 0
-#define DEFAULT_YJERK 0
-#define DEFAULT_ZJERK 0.6
-#define DEFAULT_EJERK 50.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 0
+ #define DEFAULT_YJERK 0
+ #define DEFAULT_ZJERK 0.6
+#endif
+
+#define DEFAULT_EJERK 50.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1868,6 +1880,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
index 622da7ce1e..251c408f3d 100644
--- a/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/MeCreator2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.01 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1389,10 +1388,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
index 68534f6733..631209d201 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/bltouch/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -683,6 +684,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -691,10 +700,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1877,6 +1889,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
index 16e12967f3..b41a0e009b 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro B/noprobe/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -683,6 +684,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -691,10 +700,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1876,6 +1888,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
index 3202cf1993..0d874185b3 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 1
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
index 204c84fc32..b3201ad569 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro C/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
index 52c466a0c9..799dea79e4 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
index 204c84fc32..b3201ad569 100644
--- a/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
+++ b/Marlin/src/config/examples/Geeetech/Prusa i3 Pro W/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
index f97d58d713..4155b8f811 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -672,6 +673,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -680,10 +689,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
index 0bc9c4ec22..62b97d4f96 100644
--- a/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
+++ b/Marlin/src/config/examples/Infitary/i3-M508/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration.h b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
index 4b0e381093..f4c1a398b4 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration.h
@@ -310,6 +310,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -329,7 +330,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 15 // manual calibration of thermistor in JGAurora A5 hotend
#define TEMP_SENSOR_1 0
@@ -680,6 +681,14 @@
#define DEFAULT_RETRACT_ACCELERATION 800 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -688,10 +697,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 3.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 3.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1873,6 +1885,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
index 4b22180dce..36ad25e599 100644
--- a/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
+++ b/Marlin/src/config/examples/JGAurora/A5/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/MakerParts/Configuration.h b/Marlin/src/config/examples/MakerParts/Configuration.h
index a76e7580e6..f9698bee4c 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration.h
@@ -325,6 +325,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -344,7 +345,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -688,6 +689,14 @@
#define DEFAULT_RETRACT_ACCELERATION 100 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION MAX_XYAXIS_ACCEL // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -696,10 +705,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 2.0
-#define DEFAULT_YJERK 2.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 8.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 2.0
+ #define DEFAULT_YJERK 2.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 8.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1881,6 +1893,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/MakerParts/Configuration_adv.h b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
index b8161b2826..012008642b 100644
--- a/Marlin/src/config/examples/MakerParts/Configuration_adv.h
+++ b/Marlin/src/config/examples/MakerParts/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration.h b/Marlin/src/config/examples/Malyan/M150/Configuration.h
index 6c368b0835..14773ab541 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration.h
@@ -310,6 +310,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -329,7 +330,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -688,6 +689,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 700 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -696,10 +705,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1889,6 +1901,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
index 2d625c2d6c..7610d25db3 100644
--- a/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M150/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 300 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration.h b/Marlin/src/config/examples/Malyan/M200/Configuration.h
index 566a9a74c3..839fb9a878 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 11
#define TEMP_SENSOR_1 0
@@ -667,6 +668,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -675,10 +684,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1860,6 +1872,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
index 51b1786d01..f7682b0fcd 100644
--- a/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Malyan/M200/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
index 821cee222a..f078e602db 100644
--- a/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/basic/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -672,6 +673,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -680,10 +689,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
index b10e1c51df..9fd7edefee 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -672,6 +673,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -680,10 +689,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
index a9cb575f56..b103ec4d4d 100644
--- a/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
+++ b/Marlin/src/config/examples/Micromake/C1/enhanced/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration.h b/Marlin/src/config/examples/Mks/Robin/Configuration.h
new file mode 100644
index 0000000000..d981f821a5
--- /dev/null
+++ b/Marlin/src/config/examples/Mks/Robin/Configuration.h
@@ -0,0 +1,2042 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Configuration.h
+ *
+ * Basic settings such as:
+ *
+ * - Type of electronics
+ * - Type of temperature sensor
+ * - Printer geometry
+ * - Endstop configuration
+ * - LCD controller
+ * - Extra features
+ *
+ * Advanced settings can be found in Configuration_adv.h
+ *
+ */
+#define CONFIGURATION_H_VERSION 020000
+
+//===========================================================================
+//============================= Getting Started =============================
+//===========================================================================
+
+/**
+ * Here are some standard links for getting your machine calibrated:
+ *
+ * http://reprap.org/wiki/Calibration
+ * http://youtu.be/wAL9d7FgInk
+ * http://calculator.josefprusa.cz
+ * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
+ * http://www.thingiverse.com/thing:5573
+ * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ * http://www.thingiverse.com/thing:298812
+ */
+
+//===========================================================================
+//============================= DELTA Printer ===============================
+//===========================================================================
+// For a Delta printer start with one of the configuration files in the
+// config/examples/delta directory and customize for your machine.
+//
+
+//===========================================================================
+//============================= SCARA Printer ===============================
+//===========================================================================
+// For a SCARA printer start with the configuration files in
+// config/examples/SCARA and customize for your machine.
+//
+
+// @section info
+
+// User-specified version info of this build to display in [Pronterface, etc] terminal window during
+// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
+// build by the user have been successfully uploaded into firmware.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define SHOW_BOOTSCREEN
+#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
+#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
+
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
+//#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
+// @section machine
+
+/**
+ * Select the serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
+#define SERIAL_PORT 3
+
+/**
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if available.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
+#define SERIAL_PORT_2 1
+#define NUM_SERIAL 2
+
+/**
+ * This setting determines the communication speed of the printer.
+ *
+ * 250000 works in most cases, but you might try a lower speed if
+ * you commonly experience drop-outs during host printing.
+ * You may try up to 1000000 to speed up SD file transfer.
+ *
+ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
+ */
+#define BAUDRATE 250000
+
+// Enable the Bluetooth serial interface on AT90USB devices
+//#define BLUETOOTH
+
+// The following define selects which electronics board you have.
+// Please choose the name from boards.h that matches your setup
+#ifndef MOTHERBOARD
+ #define MOTHERBOARD BOARD_MKS_ROBIN
+#endif
+
+// Optional custom name for your RepStrap or other custom machine
+// Displayed in the LCD "Ready" message
+#define CUSTOM_MACHINE_NAME "MKS Robin"
+
+// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
+// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
+
+// @section extruder
+
+// This defines the number of extruders
+// :[1, 2, 3, 4, 5, 6]
+#define EXTRUDERS 2
+
+// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
+
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
+/**
+ * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
+ *
+ * This device allows one stepper driver on a control board to drive
+ * two to eight stepper motors, one at a time, in a manner suitable
+ * for extruders.
+ *
+ * This option only allows the multiplexer to switch on tool-change.
+ * Additional options to configure custom E moves are pending.
+ */
+//#define MK2_MULTIPLEXER
+#if ENABLED(MK2_MULTIPLEXER)
+ // Override the default DIO selector pins here, if needed.
+ // Some pins files may provide defaults for these pins.
+ //#define E_MUX0_PIN 40 // Always Required
+ //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
+ //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
+#endif
+
+// A dual extruder that uses a single stepper motor
+//#define SWITCHING_EXTRUDER
+#if ENABLED(SWITCHING_EXTRUDER)
+ #define SWITCHING_EXTRUDER_SERVO_NR 0
+ #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
+ #if EXTRUDERS > 3
+ #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
+ #endif
+#endif
+
+// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
+//#define SWITCHING_NOZZLE
+#if ENABLED(SWITCHING_NOZZLE)
+ #define SWITCHING_NOZZLE_SERVO_NR 0
+ #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
+#endif
+
+/**
+ * Two separate X-carriages with extruders that connect to a moving part
+ * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN.
+ */
+//#define PARKING_EXTRUDER
+#if ENABLED(PARKING_EXTRUDER)
+ #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
+ #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
+ #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined.
+ #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
+ #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
+ //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
+#endif
+
+/**
+ * Switching Toolhead
+ *
+ * Support for swappable and dockable toolheads, such as
+ * the E3D Tool Changer. Toolheads are locked with a servo.
+ */
+//#define SWITCHING_TOOLHEAD
+#if ENABLED(SWITCHING_TOOLHEAD)
+ #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
+ #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
+ #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
+ #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
+ #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
+ #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
+#endif
+
+/**
+ * "Mixing Extruder"
+ * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
+ * - Extends the stepping routines to move multiple steppers in proportion to the mix.
+ * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools.
+ * - This implementation supports up to two mixing extruders.
+ * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
+ */
+//#define MIXING_EXTRUDER
+#if ENABLED(MIXING_EXTRUDER)
+ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
+ #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
+ //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
+#endif
+
+// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
+// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
+// For the other hotends it is their distance from the extruder 0 hotend.
+//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
+//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
+//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
+
+// @section machine
+
+/**
+ * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ *
+ * 0 = No Power Switch
+ * 1 = ATX
+ * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
+ *
+ * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ */
+#define POWER_SUPPLY 0
+
+#if POWER_SUPPLY > 0
+ // Enable this option to leave the PSU off at startup.
+ // Power to steppers and heaters will need to be turned on with M80.
+ //#define PS_DEFAULT_OFF
+
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ #if ENABLED(AUTO_POWER_CONTROL)
+ #define AUTO_POWER_FANS // Turn on PSU if fans need power
+ #define AUTO_POWER_E_FANS
+ #define AUTO_POWER_CONTROLLERFAN
+ #define POWER_TIMEOUT 30
+ #endif
+
+#endif
+
+// @section temperature
+
+//===========================================================================
+//============================= Thermal Settings ============================
+//===========================================================================
+
+/**
+ * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+ *
+ * Temperature sensors available:
+ *
+ * -4 : thermocouple with AD8495
+ * -3 : thermocouple with MAX31855 (only for sensor 0)
+ * -2 : thermocouple with MAX6675 (only for sensor 0)
+ * -1 : thermocouple with AD595
+ * 0 : not used
+ * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+ * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+ * 3 : Mendel-parts thermistor (4.7k pullup)
+ * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+ * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ * 501 : 100K Zonestar (Tronxy X3A) Thermistor
+ * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+ * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+ * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+ * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+ * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+ * 10 : 100k RS thermistor 198-961 (4.7k pullup)
+ * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
+ * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+ * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ * 15 : 100k thermistor calibration for JGAurora A5 hotend
+ * 20 : the PT100 circuit found in the Ultimainboard V2.x
+ * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
+ * 66 : 4.7M High Temperature thermistor from Dyze Design
+ * 70 : the 100K thermistor found in the bq Hephestos 2
+ * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
+ *
+ * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
+ * (but gives greater accuracy and more stable PID)
+ * 51 : 100k thermistor - EPCOS (1k pullup)
+ * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+ * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+ *
+ * 1047 : Pt1000 with 4k7 pullup
+ * 1010 : Pt1000 with 1k pullup (non standard)
+ * 147 : Pt100 with 4k7 pullup
+ * 110 : Pt100 with 1k pullup (non standard)
+ *
+ * Use these for Testing or Development purposes. NEVER for production machine.
+ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
+ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
+ *
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ */
+#define TEMP_SENSOR_0 1
+#define TEMP_SENSOR_1 1
+#define TEMP_SENSOR_2 0
+#define TEMP_SENSOR_3 0
+#define TEMP_SENSOR_4 0
+#define TEMP_SENSOR_5 0
+#define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_CHAMBER 0
+
+// Dummy thermistor constant temperature readings, for use with 998 and 999
+#define DUMMY_THERMISTOR_998_VALUE 25
+#define DUMMY_THERMISTOR_999_VALUE 100
+
+// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
+// from the two sensors differ too much the print will be aborted.
+//#define TEMP_SENSOR_1_AS_REDUNDANT
+#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
+
+// Extruder temperature must be close to target for this long before M109 returns success
+#define TEMP_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// Bed temperature must be close to target for this long before M190 returns success
+#define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// The minimal temperature defines the temperature below which the heater will not be enabled It is used
+// to check that the wiring to the thermistor is not broken.
+// Otherwise this would lead to the heater being powered on all the time.
+#define HEATER_0_MINTEMP 5
+#define HEATER_1_MINTEMP 5
+#define HEATER_2_MINTEMP 5
+#define HEATER_3_MINTEMP 5
+#define HEATER_4_MINTEMP 5
+#define HEATER_5_MINTEMP 5
+#define BED_MINTEMP 5
+
+// When temperature exceeds max temp, your heater will be switched off.
+// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
+// You should use MINTEMP for thermistor short/failure protection.
+#define HEATER_0_MAXTEMP 275
+#define HEATER_1_MAXTEMP 275
+#define HEATER_2_MAXTEMP 275
+#define HEATER_3_MAXTEMP 275
+#define HEATER_4_MAXTEMP 275
+#define HEATER_5_MAXTEMP 275
+#define BED_MAXTEMP 150
+
+//===========================================================================
+//============================= PID Settings ================================
+//===========================================================================
+// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+
+// Comment the following line to disable PID and enable bang-bang.
+#define PIDTEMP
+#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
+#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
+#define PID_K1 0.95 // Smoothing factor within any PID loop
+#if ENABLED(PIDTEMP)
+ //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
+ //#define PID_DEBUG // Sends debug data to the serial port.
+ //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
+ //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
+ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
+ // Set/get with gcode: M301 E[extruder number, 0-2]
+ #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
+ // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
+
+ // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
+ // Ultimaker
+ #define DEFAULT_Kp 22.2
+ #define DEFAULT_Ki 1.08
+ #define DEFAULT_Kd 114
+
+ // MakerGear
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
+
+ // Mendel Parts V9 on 12V
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
+
+#endif // PIDTEMP
+
+//===========================================================================
+//============================= PID > Bed Temperature Control ===============
+//===========================================================================
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
+#define PIDTEMPBED
+
+//#define BED_LIMIT_SWITCHING
+
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
+
+#if ENABLED(PIDTEMPBED)
+
+ //#define PID_BED_DEBUG // Sends debug data to the serial port.
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+ #define DEFAULT_bedKp 10.00
+ #define DEFAULT_bedKi .023
+ #define DEFAULT_bedKd 305.4
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from pidautotune
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
+
+ // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
+#endif // PIDTEMPBED
+
+// @section extruder
+
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
+#define PREVENT_COLD_EXTRUSION
+#define EXTRUDE_MINTEMP 170
+
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
+#define PREVENT_LENGTHY_EXTRUDE
+#define EXTRUDE_MAXLENGTH 200
+
+//===========================================================================
+//======================== Thermal Runaway Protection =======================
+//===========================================================================
+
+/**
+ * Thermal Protection provides additional protection to your printer from damage
+ * and fire. Marlin always includes safe min and max temperature ranges which
+ * protect against a broken or disconnected thermistor wire.
+ *
+ * The issue: If a thermistor falls out, it will report the much lower
+ * temperature of the air in the room, and the the firmware will keep
+ * the heater on.
+ *
+ * If you get "Thermal Runaway" or "Heating failed" errors the
+ * details can be tuned in Configuration_adv.h
+ */
+
+#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
+#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
+
+//===========================================================================
+//============================= Mechanical Settings =========================
+//===========================================================================
+
+// @section machine
+
+// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// either in the usual order or reversed
+//#define COREXY
+//#define COREXZ
+//#define COREYZ
+//#define COREYX
+//#define COREZX
+//#define COREZY
+
+//===========================================================================
+//============================== Endstop Settings ===========================
+//===========================================================================
+
+// @section homing
+
+// Specify here all the endstop connectors that are connected to any endstop or probe.
+// Almost all printers will be using one per axis. Probes will use one or more of the
+// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
+#define USE_XMIN_PLUG
+#define USE_YMIN_PLUG
+#define USE_ZMIN_PLUG
+//#define USE_XMAX_PLUG
+//#define USE_YMAX_PLUG
+//#define USE_ZMAX_PLUG
+
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
+#if DISABLED(ENDSTOPPULLUPS)
+ // Disable ENDSTOPPULLUPS to set pullups individually
+ //#define ENDSTOPPULLUP_XMAX
+ //#define ENDSTOPPULLUP_YMAX
+ //#define ENDSTOPPULLUP_ZMAX
+ //#define ENDSTOPPULLUP_XMIN
+ //#define ENDSTOPPULLUP_YMIN
+ //#define ENDSTOPPULLUP_ZMIN
+ //#define ENDSTOPPULLUP_ZMIN_PROBE
+#endif
+
+// Enable pulldown for all endstops to prevent a floating state
+//#define ENDSTOPPULLDOWNS
+#if DISABLED(ENDSTOPPULLDOWNS)
+ // Disable ENDSTOPPULLDOWNS to set pulldowns individually
+ //#define ENDSTOPPULLDOWN_XMAX
+ //#define ENDSTOPPULLDOWN_YMAX
+ //#define ENDSTOPPULLDOWN_ZMAX
+ //#define ENDSTOPPULLDOWN_XMIN
+ //#define ENDSTOPPULLDOWN_YMIN
+ //#define ENDSTOPPULLDOWN_ZMIN
+ //#define ENDSTOPPULLDOWN_ZMIN_PROBE
+#endif
+
+// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
+
+/**
+ * Stepper Drivers
+ *
+ * These settings allow Marlin to tune stepper driver timing and enable advanced options for
+ * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
+ *
+ * A4988 is assumed for unspecified drivers.
+ *
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
+ * TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+//#define X_DRIVER_TYPE A4988
+//#define Y_DRIVER_TYPE A4988
+//#define Z_DRIVER_TYPE A4988
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define Z3_DRIVER_TYPE A4988
+//#define E0_DRIVER_TYPE A4988
+//#define E1_DRIVER_TYPE A4988
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+//#define E5_DRIVER_TYPE A4988
+
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
+//#define ENDSTOP_INTERRUPTS_FEATURE
+
+/**
+ * Endstop Noise Threshold
+ *
+ * Enable if your probe or endstops falsely trigger due to noise.
+ *
+ * - Higher values may affect repeatability or accuracy of some bed probes.
+ * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, which already have the 100nF capacitor.
+ *
+ * :[2,3,4,5,6,7]
+ */
+//#define ENDSTOP_NOISE_THRESHOLD 2
+
+//=============================================================================
+//============================== Movement Settings ============================
+//=============================================================================
+// @section motion
+
+/**
+ * Default Settings
+ *
+ * These settings can be reset by M502
+ *
+ * Note that if EEPROM is enabled, saved values will override these.
+ */
+
+/**
+ * With this option each E stepper can have its own factors for the
+ * following movement settings. If fewer factors are given than the
+ * total number of extruders, the last value applies to the rest.
+ */
+//#define DISTINCT_E_FACTORS
+
+/**
+ * Default Axis Steps Per Unit (steps/mm)
+ * Override with M92
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
+
+/**
+ * Default Max Feed Rate (mm/s)
+ * Override with M203
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
+
+/**
+ * Default Max Acceleration (change/s) change = mm/s
+ * (Maximum start speed for accelerated moves)
+ * Override with M201
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
+
+/**
+ * Default Acceleration (change/s) change = mm/s
+ * Override with M204
+ *
+ * M204 P Acceleration
+ * M204 R Retract Acceleration
+ * M204 T Travel Acceleration
+ */
+#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Default Jerk (mm/s)
+ * Override with M205 X Y Z E
+ *
+ * "Jerk" specifies the minimum speed change that requires acceleration.
+ * When changing speed and direction, if the difference is less than the
+ * value set here, it may happen instantaneously.
+ */
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
+
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
+//===========================================================================
+//============================= Z Probe Options =============================
+//===========================================================================
+// @section probes
+
+//
+// See http://marlinfw.org/docs/configuration/probes.html
+//
+
+/**
+ * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+ *
+ * Enable this option for a probe connected to the Z Min endstop pin.
+ */
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+
+/**
+ * Z_MIN_PROBE_ENDSTOP
+ *
+ * Enable this option for a probe connected to any pin except Z-Min.
+ * (By default Marlin assumes the Z-Max endstop pin.)
+ * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
+ *
+ * - The simplest option is to use a free endstop connector.
+ * - Use 5V for powered (usually inductive) sensors.
+ *
+ * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
+ * - For simple switches connect...
+ * - normally-closed switches to GND and D32.
+ * - normally-open switches to 5V and D32.
+ *
+ * WARNING: Setting the wrong pin may have unexpected and potentially
+ * disastrous consequences. Use with caution and do your homework.
+ *
+ */
+//#define Z_MIN_PROBE_ENDSTOP
+
+/**
+ * Probe Type
+ *
+ * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
+ * Activate one of these to use Auto Bed Leveling below.
+ */
+
+/**
+ * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
+ * Use G29 repeatedly, adjusting the Z height at each point with movement commands
+ * or (with LCD_BED_LEVELING) the LCD controller.
+ */
+//#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
+
+/**
+ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
+ * (e.g., an inductive probe or a nozzle-based probe-switch.)
+ */
+//#define FIX_MOUNTED_PROBE
+
+/**
+ * Z Servo Probe, such as an endstop switch on a rotating arm.
+ */
+//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
+//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
+
+/**
+ * The BLTouch probe uses a Hall effect sensor and emulates a servo.
+ */
+//#define BLTOUCH
+#if ENABLED(BLTOUCH)
+ //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+#endif
+
+// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
+//#define SOLENOID_PROBE
+
+// A sled-mounted probe like those designed by Charles Bell.
+//#define Z_PROBE_SLED
+//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
+
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+ #define Z_PROBE_DEPLOY_X X_MIN_POS
+ #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
+//
+// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
+//
+
+/**
+ * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ * X and Y offsets must be integers.
+ *
+ * In the following example the X and Y offsets are both positive:
+ * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ *
+ * +-- BACK ---+
+ * | |
+ * L | (+) P | R <-- probe (20,20)
+ * E | | I
+ * F | (-) N (+) | G <-- nozzle (10,10)
+ * T | | H
+ * | (-) | T
+ * | |
+ * O-- FRONT --+
+ * (0,0)
+ */
+#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
+#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
+
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+
+// Feedrate (mm/m) for the "accurate" probe of each point
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+
+// The number of probes to perform at each point.
+// Set to 2 for a fast/slow probe, using the second probe result.
+// Set to 3 or more for slow probes, averaging the results.
+//#define MULTIPLE_PROBING 2
+
+/**
+ * Z probes require clearance when deploying, stowing, and moving between
+ * probe points to avoid hitting the bed and other hardware.
+ * Servo-mounted probes require extra space for the arm to rotate.
+ * Inductive probes need space to keep from triggering early.
+ *
+ * Use these settings to specify the distance (mm) to raise the probe (or
+ * lower the bed). The values set here apply over and above any (negative)
+ * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
+ * Only integer values >= 1 are valid here.
+ *
+ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
+ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
+ */
+#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING 5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
+
+// For M851 give a range for adjusting the Z probe offset
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
+
+// Enable the M48 repeatability test to test probe accuracy
+//#define Z_MIN_PROBE_REPEATABILITY_TEST
+
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
+/**
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
+ */
+//#define PROBING_HEATERS_OFF // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+ //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
+//#define PROBING_FANS_OFF // Turn fans off when probing
+//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
+//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
+
+// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
+// :{ 0:'Low', 1:'High' }
+#define X_ENABLE_ON 0
+#define Y_ENABLE_ON 0
+#define Z_ENABLE_ON 0
+#define E_ENABLE_ON 0 // For all extruders
+
+// Disables axis stepper immediately when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
+#define DISABLE_X false
+#define DISABLE_Y false
+#define DISABLE_Z false
+
+// Warn on display about possibly reduced accuracy
+//#define DISABLE_REDUCED_ACCURACY_WARNING
+
+// @section extruder
+
+#define DISABLE_E false // For all extruders
+#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
+
+// @section machine
+
+// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+#define INVERT_X_DIR false
+#define INVERT_Y_DIR true
+#define INVERT_Z_DIR false
+
+// @section extruder
+
+// For direct drive extruder v9 set to true, for geared extruder set to false.
+#define INVERT_E0_DIR false
+#define INVERT_E1_DIR false
+#define INVERT_E2_DIR false
+#define INVERT_E3_DIR false
+#define INVERT_E4_DIR false
+#define INVERT_E5_DIR false
+
+// @section homing
+
+//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
+
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
+//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
+ // Be sure you have this distance over your Z_MAX_POS in case.
+
+// Direction of endstops when homing; 1=MAX, -1=MIN
+// :[-1,1]
+#define X_HOME_DIR -1
+#define Y_HOME_DIR -1
+#define Z_HOME_DIR -1
+
+// @section machine
+
+// The size of the print bed
+#define X_BED_SIZE 200
+#define Y_BED_SIZE 200
+
+// Travel limits (mm) after homing, corresponding to endstop positions.
+#define X_MIN_POS 0
+#define Y_MIN_POS 0
+#define Z_MIN_POS 0
+#define X_MAX_POS X_BED_SIZE
+#define Y_MAX_POS Y_BED_SIZE
+#define Z_MAX_POS 200
+
+/**
+ * Software Endstops
+ *
+ * - Prevent moves outside the set machine bounds.
+ * - Individual axes can be disabled, if desired.
+ * - X and Y only apply to Cartesian robots.
+ * - Use 'M211' to set software endstops on/off or report current state
+ */
+
+// Min software endstops constrain movement within minimum coordinate bounds
+#define MIN_SOFTWARE_ENDSTOPS
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
+ #define MIN_SOFTWARE_ENDSTOP_X
+ #define MIN_SOFTWARE_ENDSTOP_Y
+ #define MIN_SOFTWARE_ENDSTOP_Z
+#endif
+
+// Max software endstops constrain movement within maximum coordinate bounds
+#define MAX_SOFTWARE_ENDSTOPS
+#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
+ #define MAX_SOFTWARE_ENDSTOP_X
+ #define MAX_SOFTWARE_ENDSTOP_Y
+ #define MAX_SOFTWARE_ENDSTOP_Z
+#endif
+
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+ //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
+#endif
+
+/**
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
+ *
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
+ */
+//#define FILAMENT_RUNOUT_SENSOR
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+ #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
+ #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
+ //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+
+ // After a runout is detected, continue printing this length of filament
+ // before executing the runout script. Useful for a sensor at the end of
+ // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
+ //#define FILAMENT_RUNOUT_DISTANCE_MM 25
+
+ #ifdef FILAMENT_RUNOUT_DISTANCE_MM
+ // Enable this option to use an encoder disc that toggles the runout pin
+ // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
+ // large enough to avoid false positives.)
+ //#define FILAMENT_MOTION_SENSOR
+ #endif
+#endif
+
+//===========================================================================
+//=============================== Bed Leveling ==============================
+//===========================================================================
+// @section calibrate
+
+/**
+ * Choose one of the options below to enable G29 Bed Leveling. The parameters
+ * and behavior of G29 will change depending on your selection.
+ *
+ * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
+ *
+ * - AUTO_BED_LEVELING_3POINT
+ * Probe 3 arbitrary points on the bed (that aren't collinear)
+ * You specify the XY coordinates of all 3 points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_LINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_BILINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a mesh, best for large or uneven beds.
+ *
+ * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
+ * A comprehensive bed leveling system combining the features and benefits
+ * of other systems. UBL also includes integrated Mesh Generation, Mesh
+ * Validation and Mesh Editing systems.
+ *
+ * - MESH_BED_LEVELING
+ * Probe a grid manually
+ * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
+ * For machines without a probe, Mesh Bed Leveling provides a method to perform
+ * leveling in steps so you can manually adjust the Z height at each grid-point.
+ * With an LCD controller the process is guided step-by-step.
+ */
+//#define AUTO_BED_LEVELING_3POINT
+//#define AUTO_BED_LEVELING_LINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
+//#define AUTO_BED_LEVELING_UBL
+//#define MESH_BED_LEVELING
+
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+//#define RESTORE_LEVELING_AFTER_G28
+
+/**
+ * Enable detailed logging of G28, G29, M48, etc.
+ * Turn on with the command 'M111 S32'.
+ * NOTE: Requires a lot of PROGMEM!
+ */
+//#define DEBUG_LEVELING_FEATURE
+
+#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+ // Gradually reduce leveling correction until a set height is reached,
+ // at which point movement will be level to the machine's XY plane.
+ // The height can be set with M420 Z
+ #define ENABLE_LEVELING_FADE_HEIGHT
+
+ // For Cartesian machines, instead of dividing moves on mesh boundaries,
+ // split up moves into short segments like a Delta. This follows the
+ // contours of the bed more closely than edge-to-edge straight moves.
+ #define SEGMENT_LEVELED_MOVES
+ #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
+
+ /**
+ * Enable the G26 Mesh Validation Pattern tool.
+ */
+ //#define G26_MESH_VALIDATION
+ #if ENABLED(G26_MESH_VALIDATION)
+ #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
+ #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
+ #define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+ #define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+ #endif
+
+#endif
+
+#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Set the number of grid points per dimension.
+ #define GRID_MAX_POINTS_X 3
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ // Set the boundaries for probing (where the probe can reach).
+ //#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
+ //#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - (MIN_PROBE_EDGE))
+ //#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
+ //#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - (MIN_PROBE_EDGE))
+
+ // Probe along the Y axis, advancing X after each column
+ //#define PROBE_Y_FIRST
+
+ #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Beyond the probed grid, continue the implied tilt?
+ // Default is to maintain the height of the nearest edge.
+ //#define EXTRAPOLATE_BEYOND_GRID
+
+ //
+ // Experimental Subdivision of the grid by Catmull-Rom method.
+ // Synthesizes intermediate points to produce a more detailed mesh.
+ //
+ //#define ABL_BILINEAR_SUBDIVISION
+ #if ENABLED(ABL_BILINEAR_SUBDIVISION)
+ // Number of subdivisions between probe points
+ #define BILINEAR_SUBDIVISIONS 3
+ #endif
+
+ #endif
+
+#elif ENABLED(AUTO_BED_LEVELING_UBL)
+
+ //===========================================================================
+ //========================= Unified Bed Leveling ============================
+ //===========================================================================
+
+ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
+
+ #define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
+ #define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
+ #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
+
+ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+ // as the Z-Height correction value.
+
+#elif ENABLED(MESH_BED_LEVELING)
+
+ //===========================================================================
+ //=================================== Mesh ==================================
+ //===========================================================================
+
+ #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
+ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
+
+#endif // BED_LEVELING
+
+/**
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+ //#define PROBE_PT_1_X 15
+ //#define PROBE_PT_1_Y 180
+ //#define PROBE_PT_2_X 15
+ //#define PROBE_PT_2_Y 20
+ //#define PROBE_PT_3_X 170
+ //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
+ */
+//#define LCD_BED_LEVELING
+
+#if ENABLED(LCD_BED_LEVELING)
+ #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
+ #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
+ //#define MESH_EDIT_MENU // Add a menu to edit mesh points
+#endif
+
+// Add a menu item to move between bed corners for manual bed adjustment
+//#define LEVEL_BED_CORNERS
+
+#if ENABLED(LEVEL_BED_CORNERS)
+ #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
+ //#define LEVEL_CENTER_TOO // Move to the center after the last corner
+#endif
+
+/**
+ * Commands to execute at the end of G29 probing.
+ * Useful to retract or move the Z probe out of the way.
+ */
+//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+
+
+// @section homing
+
+// The center of the bed is at (X=0, Y=0)
+//#define BED_CENTER_AT_0_0
+
+// Manually set the home position. Leave these undefined for automatic settings.
+// For DELTA this is the top-center of the Cartesian print volume.
+//#define MANUAL_X_HOME_POS 0
+//#define MANUAL_Y_HOME_POS 0
+//#define MANUAL_Z_HOME_POS 0
+
+// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
+//
+// With this feature enabled:
+//
+// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
+// - If stepper drivers time out, it will need X and Y homing again before Z homing.
+// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
+// - Prevent Z homing when the Z probe is outside bed area.
+//
+//#define Z_SAFE_HOMING
+
+#if ENABLED(Z_SAFE_HOMING)
+ #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
+ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
+#endif
+
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z (4*60)
+
+// Validate that endstops are triggered on homing moves
+#define VALIDATE_HOMING_ENDSTOPS
+
+// @section calibrate
+
+/**
+ * Bed Skew Compensation
+ *
+ * This feature corrects for misalignment in the XYZ axes.
+ *
+ * Take the following steps to get the bed skew in the XY plane:
+ * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
+ * 2. For XY_DIAG_AC measure the diagonal A to C
+ * 3. For XY_DIAG_BD measure the diagonal B to D
+ * 4. For XY_SIDE_AD measure the edge A to D
+ *
+ * Marlin automatically computes skew factors from these measurements.
+ * Skew factors may also be computed and set manually:
+ *
+ * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
+ * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
+ *
+ * If desired, follow the same procedure for XZ and YZ.
+ * Use these diagrams for reference:
+ *
+ * Y Z Z
+ * ^ B-------C ^ B-------C ^ B-------C
+ * | / / | / / | / /
+ * | / / | / / | / /
+ * | A-------D | A-------D | A-------D
+ * +-------------->X +-------------->X +-------------->Y
+ * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
+ */
+//#define SKEW_CORRECTION
+
+#if ENABLED(SKEW_CORRECTION)
+ // Input all length measurements here:
+ #define XY_DIAG_AC 282.8427124746
+ #define XY_DIAG_BD 282.8427124746
+ #define XY_SIDE_AD 200
+
+ // Or, set the default skew factors directly here
+ // to override the above measurements:
+ #define XY_SKEW_FACTOR 0.0
+
+ //#define SKEW_CORRECTION_FOR_Z
+ #if ENABLED(SKEW_CORRECTION_FOR_Z)
+ #define XZ_DIAG_AC 282.8427124746
+ #define XZ_DIAG_BD 282.8427124746
+ #define YZ_DIAG_AC 282.8427124746
+ #define YZ_DIAG_BD 282.8427124746
+ #define YZ_SIDE_AD 200
+ #define XZ_SKEW_FACTOR 0.0
+ #define YZ_SKEW_FACTOR 0.0
+ #endif
+
+ // Enable this option for M852 to set skew at runtime
+ //#define SKEW_CORRECTION_GCODE
+#endif
+
+//=============================================================================
+//============================= Additional Features ===========================
+//=============================================================================
+
+// @section extras
+
+//
+// EEPROM
+//
+// The microcontroller can store settings in the EEPROM, e.g. max velocity...
+// M500 - stores parameters in EEPROM
+// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
+// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
+//
+//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
+//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
+#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
+
+//
+// Host Keepalive
+//
+// When enabled Marlin will send a busy status message to the host
+// every couple of seconds when it can't accept commands.
+//
+#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
+#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
+
+//
+// M100 Free Memory Watcher
+//
+//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
+
+//
+// G20/G21 Inch mode support
+//
+//#define INCH_MODE_SUPPORT
+
+//
+// M149 Set temperature units support
+//
+//#define TEMPERATURE_UNITS_SUPPORT
+
+// @section temperature
+
+// Preheat Constants
+#define PREHEAT_1_LABEL "PLA"
+#define PREHEAT_1_TEMP_HOTEND 180
+#define PREHEAT_1_TEMP_BED 70
+#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
+
+#define PREHEAT_2_LABEL "ABS"
+#define PREHEAT_2_TEMP_HOTEND 240
+#define PREHEAT_2_TEMP_BED 110
+#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
+
+/**
+ * Nozzle Park
+ *
+ * Park the nozzle at the given XYZ position on idle or G27.
+ *
+ * The "P" parameter controls the action applied to the Z axis:
+ *
+ * P0 (Default) If Z is below park Z raise the nozzle.
+ * P1 Raise the nozzle always to Z-park height.
+ * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
+ */
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+ // Specify a park position as { X, Y, Z }
+ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+ #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+ #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
+#endif
+
+/**
+ * Clean Nozzle Feature -- EXPERIMENTAL
+ *
+ * Adds the G12 command to perform a nozzle cleaning process.
+ *
+ * Parameters:
+ * P Pattern
+ * S Strokes / Repetitions
+ * T Triangles (P1 only)
+ *
+ * Patterns:
+ * P0 Straight line (default). This process requires a sponge type material
+ * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
+ * between the start / end points.
+ *
+ * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
+ * number of zig-zag triangles to do. "S" defines the number of strokes.
+ * Zig-zags are done in whichever is the narrower dimension.
+ * For example, "G12 P1 S1 T3" will execute:
+ *
+ * --
+ * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
+ * | | / \ / \ / \ |
+ * A | | / \ / \ / \ |
+ * | | / \ / \ / \ |
+ * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
+ * -- +--------------------------------+
+ * |________|_________|_________|
+ * T1 T2 T3
+ *
+ * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
+ * "R" specifies the radius. "S" specifies the stroke count.
+ * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
+ *
+ * Caveats: The ending Z should be the same as starting Z.
+ * Attention: EXPERIMENTAL. G-code arguments may change.
+ *
+ */
+//#define NOZZLE_CLEAN_FEATURE
+
+#if ENABLED(NOZZLE_CLEAN_FEATURE)
+ // Default number of pattern repetitions
+ #define NOZZLE_CLEAN_STROKES 12
+
+ // Default number of triangles
+ #define NOZZLE_CLEAN_TRIANGLES 3
+
+ // Specify positions as { X, Y, Z }
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
+
+ // Circular pattern radius
+ #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
+ // Circular pattern circle fragments number
+ #define NOZZLE_CLEAN_CIRCLE_FN 10
+ // Middle point of circle
+ #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
+
+ // Moves the nozzle to the initial position
+ #define NOZZLE_CLEAN_GOBACK
+#endif
+
+/**
+ * Print Job Timer
+ *
+ * Automatically start and stop the print job timer on M104/M109/M190.
+ *
+ * M104 (hotend, no wait) - high temp = none, low temp = stop timer
+ * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
+ * M190 (bed, wait) - high temp = start timer, low temp = none
+ *
+ * The timer can also be controlled with the following commands:
+ *
+ * M75 - Start the print job timer
+ * M76 - Pause the print job timer
+ * M77 - Stop the print job timer
+ */
+#define PRINTJOB_TIMER_AUTOSTART
+
+/**
+ * Print Counter
+ *
+ * Track statistical data such as:
+ *
+ * - Total print jobs
+ * - Total successful print jobs
+ * - Total failed print jobs
+ * - Total time printing
+ *
+ * View the current statistics with M78.
+ */
+//#define PRINTCOUNTER
+
+//=============================================================================
+//============================= LCD and SD support ============================
+//=============================================================================
+
+// @section lcd
+
+/**
+ * LCD LANGUAGE
+ *
+ * Select the language to display on the LCD. These languages are available:
+ *
+ * en, an, bg, ca, cz, da, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
+ * jp-kana, ko_KR, nl, pl, pt, pt-br, ru, sk, tr, uk, zh_CN, zh_TW, test
+ *
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
+ */
+#define LCD_LANGUAGE en
+
+/**
+ * LCD Character Set
+ *
+ * Note: This option is NOT applicable to Graphical Displays.
+ *
+ * All character-based LCDs provide ASCII plus one of these
+ * language extensions:
+ *
+ * - JAPANESE ... the most common
+ * - WESTERN ... with more accented characters
+ * - CYRILLIC ... for the Russian language
+ *
+ * To determine the language extension installed on your controller:
+ *
+ * - Compile and upload with LCD_LANGUAGE set to 'test'
+ * - Click the controller to view the LCD menu
+ * - The LCD will display Japanese, Western, or Cyrillic text
+ *
+ * See http://marlinfw.org/docs/development/lcd_language.html
+ *
+ * :['JAPANESE', 'WESTERN', 'CYRILLIC']
+ */
+#define DISPLAY_CHARSET_HD44780 JAPANESE
+
+/**
+ * Info Screen Style (0:Classic, 1:Prusa)
+ *
+ * :[0:'Classic', 1:'Prusa']
+ */
+#define LCD_INFO_SCREEN_STYLE 0
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ *
+ */
+#define SDSUPPORT
+#define SDIO_SUPPORT
+
+/**
+ * SD CARD: SPI SPEED
+ *
+ * Enable one of the following items for a slower SPI transfer speed.
+ * This may be required to resolve "volume init" errors.
+ */
+//#define SPI_SPEED SPI_HALF_SPEED
+//#define SPI_SPEED SPI_QUARTER_SPEED
+//#define SPI_SPEED SPI_EIGHTH_SPEED
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+//#define SD_CHECK_AND_RETRY
+
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
+//
+// ENCODER SETTINGS
+//
+// This option overrides the default number of encoder pulses needed to
+// produce one step. Should be increased for high-resolution encoders.
+//
+//#define ENCODER_PULSES_PER_STEP 4
+
+//
+// Use this option to override the number of step signals required to
+// move between next/prev menu items.
+//
+//#define ENCODER_STEPS_PER_MENU_ITEM 1
+
+/**
+ * Encoder Direction Options
+ *
+ * Test your encoder's behavior first with both options disabled.
+ *
+ * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
+ * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
+ * Reversed Value Editing only? Enable BOTH options.
+ */
+
+//
+// This option reverses the encoder direction everywhere.
+//
+// Set this option if CLOCKWISE causes values to DECREASE
+//
+//#define REVERSE_ENCODER_DIRECTION
+
+//
+// This option reverses the encoder direction for navigating LCD menus.
+//
+// If CLOCKWISE normally moves DOWN this makes it go UP.
+// If CLOCKWISE normally moves UP this makes it go DOWN.
+//
+//#define REVERSE_MENU_DIRECTION
+
+//
+// Individual Axis Homing
+//
+// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
+//
+//#define INDIVIDUAL_AXIS_HOMING_MENU
+
+//
+// SPEAKER/BUZZER
+//
+// If you have a speaker that can produce tones, enable it here.
+// By default Marlin assumes you have a buzzer with a fixed frequency.
+//
+//#define SPEAKER
+
+//
+// The duration and frequency for the UI feedback sound.
+// Set these to 0 to disable audio feedback in the LCD menus.
+//
+// Note: Test audio output with the G-Code:
+// M300 S P
+//
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
+
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//======================== (Character-based LCDs) =========================
+//=============================================================================
+
+//
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
+//
+// Note: Usually sold with a white PCB.
+//
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
+
+//
+// Original RADDS LCD Display+Encoder+SDCardReader
+// http://doku.radds.org/dokumentation/lcd-display/
+//
+//#define RADDS_DISPLAY
+
+//
+// ULTIMAKER Controller.
+//
+//#define ULTIMAKERCONTROLLER
+
+//
+// ULTIPANEL as seen on Thingiverse.
+//
+//#define ULTIPANEL
+
+//
+// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
+// http://reprap.org/wiki/PanelOne
+//
+//#define PANEL_ONE
+
+//
+// GADGETS3D G3D LCD/SD Controller
+// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
+//
+// Note: Usually sold with a blue PCB.
+//
+//#define G3D_PANEL
+
+//
+// RigidBot Panel V1.0
+// http://www.inventapart.com/
+//
+//#define RIGIDBOT_PANEL
+
+//
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
+//
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
+
+//
+// ANET and Tronxy 20x4 Controller
+//
+//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+ // This LCD is known to be susceptible to electrical interference
+ // which scrambles the display. Pressing any button clears it up.
+ // This is a LCD2004 display with 5 analog buttons.
+
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
+
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//===================== (I2C and Shift-Register LCDs) =====================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: I2C
+//
+// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
+// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+//
+
+//
+// Elefu RA Board Control Panel
+// http://www.elefu.com/index.php?route=product/product&product_id=53
+//
+//#define RA_CONTROL_PANEL
+
+//
+// Sainsmart (YwRobot) LCD Displays
+//
+// These require F.Malpartida's LiquidCrystal_I2C library
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+//
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
+
+//
+// Generic LCM1602 LCD adapter
+//
+//#define LCM1602
+
+//
+// PANELOLU2 LCD with status LEDs,
+// separate encoder and click inputs.
+//
+// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
+// For more info: https://github.com/lincomatic/LiquidTWI2
+//
+// Note: The PANELOLU2 encoder click input can either be directly connected to
+// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
+//
+//#define LCD_I2C_PANELOLU2
+
+//
+// Panucatt VIKI LCD with status LEDs,
+// integrated click & L/R/U/D buttons, separate encoder inputs.
+//
+//#define LCD_I2C_VIKI
+
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//======================= LCD / Controller Selection =======================
+//========================= (Graphical LCDs) ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+// https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
+// SSD1306 OLED full graphics generic display
+//
+//#define U8GLIB_SSD1306
+
+//
+// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
+//
+//#define SAV_3DGLCD
+#if ENABLED(SAV_3DGLCD)
+ //#define U8GLIB_SSD1306
+ #define U8GLIB_SH1106
+#endif
+
+//
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
+//
+//#define ULTI_CONTROLLER
+
+//
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
+// MKS MINI12864 with graphic controller and SD support
+// http://reprap.org/wiki/MKS_MINI_12864
+//
+//#define MKS_MINI_12864
+
+//
+// Factory display for Creality CR-10
+// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
+//
+// This is RAMPS-compatible using a single 10-pin connector.
+// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
+//
+//#define CR10_STOCKDISPLAY
+
+//
+// ANET and Tronxy Graphical Controller
+//
+// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+// A clone of the RepRapDiscount full graphics display but with
+// different pins/wiring (see pins_ANET_10.h).
+//
+//#define ANET_FULL_GRAPHICS_LCD
+
+//
+// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
+// http://reprap.org/wiki/MKS_12864OLED
+//
+// Tiny, but very sharp OLED display
+//
+//#define MKS_12864OLED // Uses the SH1106 controller (default)
+//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
+
+//
+// AZSMZ 12864 LCD with SD
+// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
+//
+//#define AZSMZ_12864
+
+//
+// Silvergate GLCD controller
+// http://github.com/android444/Silvergate
+//
+//#define SILVER_GATE_GLCD_CONTROLLER
+
+//
+// Extensible UI
+//
+// Enable third-party or vendor customized user interfaces that aren't
+// packaged with Marlin. Source code for the user interface will need to
+// be placed in "src/lcd/extensible_ui/lib"
+//
+//#define EXTENSIBLE_UI
+
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+#define MKS_ROBIN_TFT
+
+//=============================================================================
+//============================ Other Controllers ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
+//=============================================================================
+//=============================== Extra Features ==============================
+//=============================================================================
+
+// @section extras
+
+// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
+//#define FAST_PWM_FAN
+
+// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
+// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+// is too low, you should also increment SOFT_PWM_SCALE.
+//#define FAN_SOFT_PWM
+
+// Incrementing this by 1 will double the software PWM frequency,
+// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
+// However, control resolution will be halved for each increment;
+// at zero value, there are 128 effective control positions.
+#define SOFT_PWM_SCALE 0
+
+// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
+// be used to mitigate the associated resolution loss. If enabled,
+// some of the PWM cycles are stretched so on average the desired
+// duty cycle is attained.
+//#define SOFT_PWM_DITHER
+
+// Temperature status LEDs that display the hotend and bed temperature.
+// If all hotends, bed temperature, and target temperature are under 54C
+// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+//#define TEMP_STAT_LEDS
+
+// M240 Triggers a camera by emulating a Canon RC-1 Remote
+// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
+//#define PHOTOGRAPH_PIN 23
+
+// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
+//#define SF_ARC_FIX
+
+// Support for the BariCUDA Paste Extruder
+//#define BARICUDA
+
+// Support for BlinkM/CyzRgb
+//#define BLINKM
+
+// Support for PCA9632 PWM LED driver
+//#define PCA9632
+
+/**
+ * RGB LED / LED Strip Control
+ *
+ * Enable support for an RGB LED connected to 5V digital pins, or
+ * an RGB Strip connected to MOSFETs controlled by digital pins.
+ *
+ * Adds the M150 command to set the LED (or LED strip) color.
+ * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
+ * luminance values can be set from 0 to 255.
+ * For Neopixel LED an overall brightness parameter is also available.
+ *
+ * *** CAUTION ***
+ * LED Strips require a MOSFET Chip between PWM lines and LEDs,
+ * as the Arduino cannot handle the current the LEDs will require.
+ * Failure to follow this precaution can destroy your Arduino!
+ * NOTE: A separate 5V power supply is required! The Neopixel LED needs
+ * more current than the Arduino 5V linear regulator can produce.
+ * *** CAUTION ***
+ *
+ * LED Type. Enable only one of the following two options.
+ *
+ */
+//#define RGB_LED
+//#define RGBW_LED
+
+#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+ #define RGB_LED_R_PIN 34
+ #define RGB_LED_G_PIN 43
+ #define RGB_LED_B_PIN 35
+ #define RGB_LED_W_PIN -1
+#endif
+
+// Support for Adafruit Neopixel LED driver
+//#define NEOPIXEL_LED
+#if ENABLED(NEOPIXEL_LED)
+ #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
+ #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
+ #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip
+ #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
+ #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
+ //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
+#endif
+
+/**
+ * Printer Event LEDs
+ *
+ * During printing, the LEDs will reflect the printer status:
+ *
+ * - Gradually change from blue to violet as the heated bed gets to target temp
+ * - Gradually change from violet to red as the hotend gets to temperature
+ * - Change to white to illuminate work surface
+ * - Change to green once print has finished
+ * - Turn off after the print has finished and the user has pushed a button
+ */
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
+ #define PRINTER_EVENT_LEDS
+#endif
+
+/**
+ * R/C SERVO support
+ * Sponsored by TrinityLabs, Reworked by codexmas
+ */
+
+/**
+ * Number of servos
+ *
+ * For some servo-related options NUM_SERVOS will be set automatically.
+ * Set this manually if there are extra servos needing manual control.
+ * Leave undefined or set to 0 to entirely disable the servo subsystem.
+ */
+//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
+
+// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
+// 300ms is a good value but you can try less delay.
+// If the servo can't reach the requested position, increase it.
+#define SERVO_DELAY { 300 }
+
+// Only power servos during movement, otherwise leave off to prevent jitter
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
diff --git a/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
new file mode 100644
index 0000000000..037847e96e
--- /dev/null
+++ b/Marlin/src/config/examples/Mks/Robin/Configuration_adv.h
@@ -0,0 +1,1970 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Configuration_adv.h
+ *
+ * Advanced settings.
+ * Only change these if you know exactly what you're doing.
+ * Some of these settings can damage your printer if improperly set!
+ *
+ * Basic settings can be found in Configuration.h
+ *
+ */
+#define CONFIGURATION_ADV_H_VERSION 020000
+
+// @section temperature
+
+//===========================================================================
+//=============================Thermal Settings ============================
+//===========================================================================
+
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+ #undef TEMP_SENSOR_BED
+ #define TEMP_SENSOR_BED 70
+ #define HEATER_BED_INVERTING true
+#endif
+
+#if DISABLED(PIDTEMPBED)
+ #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
+ #if ENABLED(BED_LIMIT_SWITCHING)
+ #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
+ #endif
+#endif
+
+/**
+ * Thermal Protection provides additional protection to your printer from damage
+ * and fire. Marlin always includes safe min and max temperature ranges which
+ * protect against a broken or disconnected thermistor wire.
+ *
+ * The issue: If a thermistor falls out, it will report the much lower
+ * temperature of the air in the room, and the the firmware will keep
+ * the heater on.
+ *
+ * The solution: Once the temperature reaches the target, start observing.
+ * If the temperature stays too far below the target (hysteresis) for too
+ * long (period), the firmware will halt the machine as a safety precaution.
+ *
+ * If you get false positives for "Thermal Runaway", increase
+ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
+ */
+#if ENABLED(THERMAL_PROTECTION_HOTENDS)
+ #define THERMAL_PROTECTION_PERIOD 40 // Seconds
+ #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
+
+ /**
+ * Whenever an M104, M109, or M303 increases the target temperature, the
+ * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
+ * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
+ * requires a hard reset. This test restarts with any M104/M109/M303, but only
+ * if the current temperature is far enough below the target for a reliable
+ * test.
+ *
+ * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
+ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
+ * below 2.
+ */
+ #define WATCH_TEMP_PERIOD 20 // Seconds
+ #define WATCH_TEMP_INCREASE 2 // Degrees Celsius
+#endif
+
+/**
+ * Thermal Protection parameters for the bed are just as above for hotends.
+ */
+#if ENABLED(THERMAL_PROTECTION_BED)
+ #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
+ #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+
+ /**
+ * As described above, except for the bed (M140/M190/M303).
+ */
+ #define WATCH_BED_TEMP_PERIOD 60 // Seconds
+ #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
+#endif
+
+#if ENABLED(PIDTEMP)
+ // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
+ // if Kc is chosen well, the additional required power due to increased melting should be compensated.
+ //#define PID_EXTRUSION_SCALING
+ #if ENABLED(PID_EXTRUSION_SCALING)
+ #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+ #define LPQ_MAX_LEN 50
+ #endif
+#endif
+
+/**
+ * Automatic Temperature:
+ * The hotend target temperature is calculated by all the buffered lines of gcode.
+ * The maximum buffered steps/sec of the extruder motor is called "se".
+ * Start autotemp mode with M109 S B F
+ * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
+ * mintemp and maxtemp. Turn this off by executing M109 without F*
+ * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
+ * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
+ */
+#define AUTOTEMP
+#if ENABLED(AUTOTEMP)
+ #define AUTOTEMP_OLDWEIGHT 0.98
+#endif
+
+// Show extra position information in M114
+//#define M114_DETAIL
+
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
+//#define SHOW_TEMP_ADC_VALUES
+
+/**
+ * High Temperature Thermistor Support
+ *
+ * Thermistors able to support high temperature tend to have a hard time getting
+ * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
+ * will probably be caught when the heating element first turns on during the
+ * preheating process, which will trigger a min_temp_error as a safety measure
+ * and force stop everything.
+ * To circumvent this limitation, we allow for a preheat time (during which,
+ * min_temp_error won't be triggered) and add a min_temp buffer to handle
+ * aberrant readings.
+ *
+ * If you want to enable this feature for your hotend thermistor(s)
+ * uncomment and set values > 0 in the constants below
+ */
+
+// The number of consecutive low temperature errors that can occur
+// before a min_temp_error is triggered. (Shouldn't be more than 10.)
+//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+
+// The number of milliseconds a hotend will preheat before starting to check
+// the temperature. This value should NOT be set to the time it takes the
+// hot end to reach the target temperature, but the time it takes to reach
+// the minimum temperature your thermistor can read. The lower the better/safer.
+// This shouldn't need to be more than 30 seconds (30000)
+//#define MILLISECONDS_PREHEAT_TIME 0
+
+// @section extruder
+
+// Extruder runout prevention.
+// If the machine is idle and the temperature over MINTEMP
+// then extrude some filament every couple of SECONDS.
+//#define EXTRUDER_RUNOUT_PREVENT
+#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
+ #define EXTRUDER_RUNOUT_MINTEMP 190
+ #define EXTRUDER_RUNOUT_SECONDS 30
+ #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
+ #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
+#endif
+
+// @section temperature
+
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET 0.0
+#define TEMP_SENSOR_AD595_GAIN 1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN 1.0
+
+/**
+ * Controller Fan
+ * To cool down the stepper drivers and MOSFETs.
+ *
+ * The fan will turn on automatically whenever any stepper is enabled
+ * and turn off after a set period after all steppers are turned off.
+ */
+//#define USE_CONTROLLER_FAN
+#if ENABLED(USE_CONTROLLER_FAN)
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
+ #define CONTROLLERFAN_SPEED 255 // 255 == full speed
+#endif
+
+// When first starting the main fan, run it at full speed for the
+// given number of milliseconds. This gets the fan spinning reliably
+// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
+//#define FAN_KICKSTART_TIME 100
+
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
+//#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
+
+// @section extruder
+
+/**
+ * Extruder cooling fans
+ *
+ * Extruder auto fans automatically turn on when their extruders'
+ * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
+ *
+ * Your board's pins file specifies the recommended pins. Override those here
+ * or set to -1 to disable completely.
+ *
+ * Multiple extruders can be assigned to the same pin in which case
+ * the fan will turn on when any selected extruder is above the threshold.
+ */
+#define E0_AUTO_FAN_PIN -1
+#define E1_AUTO_FAN_PIN -1
+#define E2_AUTO_FAN_PIN -1
+#define E3_AUTO_FAN_PIN -1
+#define E4_AUTO_FAN_PIN -1
+#define E5_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
+#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
+#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
+
+/**
+ * Part-Cooling Fan Multiplexer
+ *
+ * This feature allows you to digitally multiplex the fan output.
+ * The multiplexer is automatically switched at tool-change.
+ * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
+ */
+#define FANMUX0_PIN -1
+#define FANMUX1_PIN -1
+#define FANMUX2_PIN -1
+
+/**
+ * M355 Case Light on-off / brightness
+ */
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+ //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+ #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+ #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+ #endif
+#endif
+
+//===========================================================================
+//============================ Mechanical Settings ==========================
+//===========================================================================
+
+// @section homing
+
+// If you want endstops to stay on (by default) even when not homing
+// enable this option. Override at any time with M120, M121.
+//#define ENDSTOPS_ALWAYS_ON_DEFAULT
+
+// @section extras
+
+//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
+
+// Employ an external closed loop controller. Override pins here if needed.
+//#define EXTERNAL_CLOSED_LOOP_CONTROLLER
+#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
+ //#define CLOSED_LOOP_ENABLE_PIN -1
+ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
+#endif
+
+/**
+ * Dual Steppers / Dual Endstops
+ *
+ * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
+ *
+ * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
+ * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
+ * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
+ * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
+ *
+ * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
+ * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
+ * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'.
+ */
+
+//#define X_DUAL_STEPPER_DRIVERS
+#if ENABLED(X_DUAL_STEPPER_DRIVERS)
+ #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
+ //#define X_DUAL_ENDSTOPS
+ #if ENABLED(X_DUAL_ENDSTOPS)
+ #define X2_USE_ENDSTOP _XMAX_
+ #define X_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Y_DUAL_STEPPER_DRIVERS
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+ #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
+ //#define Y_DUAL_ENDSTOPS
+ #if ENABLED(Y_DUAL_ENDSTOPS)
+ #define Y2_USE_ENDSTOP _YMAX_
+ #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Z_DUAL_STEPPER_DRIVERS
+#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
+ //#define Z_DUAL_ENDSTOPS
+ #if ENABLED(Z_DUAL_ENDSTOPS)
+ #define Z2_USE_ENDSTOP _XMAX_
+ #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Z_TRIPLE_STEPPER_DRIVERS
+#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
+ //#define Z_TRIPLE_ENDSTOPS
+ #if ENABLED(Z_TRIPLE_ENDSTOPS)
+ #define Z2_USE_ENDSTOP _XMAX_
+ #define Z3_USE_ENDSTOP _YMAX_
+ #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0
+ #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0
+ #endif
+#endif
+
+/**
+ * Dual X Carriage
+ *
+ * This setup has two X carriages that can move independently, each with its own hotend.
+ * The carriages can be used to print an object with two colors or materials, or in
+ * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
+ * The inactive carriage is parked automatically to prevent oozing.
+ * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
+ * By default the X2 stepper is assigned to the first unused E plug on the board.
+ */
+//#define DUAL_X_CARRIAGE
+#if ENABLED(DUAL_X_CARRIAGE)
+ #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+ #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
+ #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
+ #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
+ #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
+ #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
+ // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
+ // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
+ // without modifying the firmware (through the "M218 T1 X???" command).
+ // Remember: you should set the second extruder x-offset to 0 in your slicer.
+
+ // There are a few selectable movement modes for dual x-carriages using M605 S
+ // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+ // as long as it supports dual x-carriages. (M605 S0)
+ // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+ // that additional slicer support is not required. (M605 S1)
+ // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+ // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+ // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+
+ // This is the default power-up mode which can be later using M605.
+ #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
+
+ // Default x offset in duplication mode (typically set to half print bed width)
+ #define DEFAULT_DUPLICATION_X_OFFSET 100
+
+#endif // DUAL_X_CARRIAGE
+
+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
+// @section homing
+
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
+#define X_HOME_BUMP_MM 5
+#define Y_HOME_BUMP_MM 5
+#define Z_HOME_BUMP_MM 2
+#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
+//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
+
+// When G28 is called, this option will make Y home before X
+//#define HOME_Y_BEFORE_X
+
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
+/**
+ * Z Steppers Auto-Alignment
+ * Add the G34 command to align multiple Z steppers using a bed probe.
+ */
+//#define Z_STEPPER_AUTO_ALIGN
+#if ENABLED(Z_STEPPER_AUTO_ALIGN)
+ // Define probe X and Y positions for Z1, Z2 [, Z3]
+ #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
+ #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+ // Set number of iterations to align
+ #define Z_STEPPER_ALIGN_ITERATIONS 3
+ // Enable to restore leveling setup after operation
+ #define RESTORE_LEVELING_AFTER_G34
+ // Use the amplification factor to de-/increase correction step.
+ // In case the stepper (spindle) position is further out than the test point
+ // Use a value > 1. NOTE: This may cause instability
+ #define Z_STEPPER_ALIGN_AMP 1.0
+ // Stop criterion. If the accuracy is better than this stop iterating early
+ #define Z_STEPPER_ALIGN_ACC 0.02
+#endif
+
+// @section machine
+
+#define AXIS_RELATIVE_MODES {false, false, false, false}
+
+// Allow duplication mode with a basic dual-nozzle extruder
+//#define DUAL_NOZZLE_DUPLICATION_MODE
+
+// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
+#define INVERT_X_STEP_PIN false
+#define INVERT_Y_STEP_PIN false
+#define INVERT_Z_STEP_PIN false
+#define INVERT_E_STEP_PIN false
+
+// Default stepper release if idle. Set to 0 to deactivate.
+// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
+// Time can be set by M18 and M84.
+#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DISABLE_INACTIVE_X true
+#define DISABLE_INACTIVE_Y true
+#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.
+#define DISABLE_INACTIVE_E true
+
+#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
+#define DEFAULT_MINTRAVELFEEDRATE 0.0
+
+//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
+
+// @section lcd
+
+#if ENABLED(ULTIPANEL)
+ #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+ #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
+ #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+#endif
+
+// @section extras
+
+// minimum time in microseconds that a movement needs to take if the buffer is emptied.
+#define DEFAULT_MINSEGMENTTIME 20000
+
+// If defined the movements slow down when the look ahead buffer is only half full
+#define SLOWDOWN
+
+// Frequency limit
+// See nophead's blog for more info
+// Not working O
+//#define XY_FREQUENCY_LIMIT 15
+
+// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
+// of the buffer and all stops. This should not be much greater than zero and should only be changed
+// if unwanted behavior is observed on a user's machine when running at very slow speeds.
+#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
+
+//
+// Backlash Compensation
+// Adds extra movement to axes on direction-changes to account for backlash.
+//
+//#define BACKLASH_COMPENSATION
+#if ENABLED(BACKLASH_COMPENSATION)
+ // Define values for backlash distance and correction.
+ // If BACKLASH_GCODE is enabled these values are the defaults.
+ #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
+ #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
+
+ // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
+ // to reduce print artifacts. (Enabling this is costly in memory and computation!)
+ //#define BACKLASH_SMOOTHING_MM 3 // (mm)
+
+ // Add runtime configuration and tuning of backlash values (M425)
+ //#define BACKLASH_GCODE
+
+ #if ENABLED(BACKLASH_GCODE)
+ // Measure the Z backlash when probing (G29) and set with "M425 Z"
+ #define MEASURE_BACKLASH_WHEN_PROBING
+
+ #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
+ // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
+ // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
+ // increments while checking for the contact to be broken.
+ #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
+ #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
+ #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m)
+ #endif
+ #endif
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
+/**
+ * Custom Microstepping
+ * Override as-needed for your setup. Up to 3 MS pins are supported.
+ */
+//#define MICROSTEP1 LOW,LOW,LOW
+//#define MICROSTEP2 HIGH,LOW,LOW
+//#define MICROSTEP4 LOW,HIGH,LOW
+//#define MICROSTEP8 HIGH,HIGH,LOW
+//#define MICROSTEP16 LOW,LOW,HIGH
+//#define MICROSTEP32 HIGH,LOW,HIGH
+
+// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
+
+/**
+ * @section stepper motor current
+ *
+ * Some boards have a means of setting the stepper motor current via firmware.
+ *
+ * The power on motor currents are set by:
+ * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
+ * known compatible chips: A4982
+ * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
+ * known compatible chips: AD5206
+ * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
+ * known compatible chips: MCP4728
+ * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
+ * known compatible chips: MCP4451, MCP4018
+ *
+ * Motor currents can also be set by M907 - M910 and by the LCD.
+ * M907 - applies to all.
+ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
+ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
+ */
+//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
+//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+
+// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
+//#define DIGIPOT_I2C
+#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A)
+ /**
+ * Common slave addresses:
+ *
+ * A (A shifted) B (B shifted) IC
+ * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
+ * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
+ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
+ * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
+ */
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
+ #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT
+#endif
+
+//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
+#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
+#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
+
+//===========================================================================
+//=============================Additional Features===========================
+//===========================================================================
+
+// @section lcd
+
+// Change values more rapidly when the encoder is rotated faster
+#define ENCODER_RATE_MULTIPLIER
+#if ENABLED(ENCODER_RATE_MULTIPLIER)
+ #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
+ #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
+#endif
+
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
+// Scroll a longer status message into view
+//#define STATUS_MESSAGE_SCROLLING
+
+// On the Info Screen, display XY with one decimal place when possible
+//#define LCD_DECIMAL_SMALL_XY
+
+// The timeout (in ms) to return to the status screen from sub-menus
+//#define LCD_TIMEOUT_TO_STATUS 15000
+
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
+ //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
+ #if ENABLED(LCD_PROGRESS_BAR)
+ #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
+ #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
+ #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever)
+ //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
+ //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
+ #endif
+#endif // HAS_PRINT_PROGRESS
+
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
+#if ENABLED(LED_CONTROL_MENU)
+ #define LED_COLOR_PRESETS // Enable the Preset Color menu option
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+ #endif
+#endif // LED_CONTROL_MENU
+
+#if ENABLED(SDSUPPORT)
+
+ // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
+ // around this by connecting a push button or single throw switch to the pin defined
+ // as SD_DETECT_PIN in your board's pins definitions.
+ // This setting should be disabled unless you are using a push button, pulling the pin to ground.
+ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
+ //#define SD_DETECT_INVERTED
+
+ #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
+ #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
+
+ // Reverse SD sort to show "more recent" files first, according to the card's FAT.
+ // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
+ #define SDCARD_RATHERRECENTFIRST
+
+ // Add an option in the menu to run all auto#.g files
+ //#define MENU_ADDAUTOSTART
+
+ /**
+ * Continue after Power-Loss (Creality3D)
+ *
+ * Store the current state to the SD Card at the start of each layer
+ * during SD printing. If the recovery file is found at boot time, present
+ * an option on the LCD screen to continue the print from the last-known
+ * point in the file.
+ */
+ //#define POWER_LOSS_RECOVERY
+ #if ENABLED(POWER_LOSS_RECOVERY)
+ //#define POWER_LOSS_PIN 44 // Pin to detect power loss
+ //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+ #endif
+
+ /**
+ * Sort SD file listings in alphabetical order.
+ *
+ * With this option enabled, items on SD cards will be sorted
+ * by name for easier navigation.
+ *
+ * By default...
+ *
+ * - Use the slowest -but safest- method for sorting.
+ * - Folders are sorted to the top.
+ * - The sort key is statically allocated.
+ * - No added G-code (M34) support.
+ * - 40 item sorting limit. (Items after the first 40 are unsorted.)
+ *
+ * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
+ * compiler to calculate the worst-case usage and throw an error if the SRAM
+ * limit is exceeded.
+ *
+ * - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
+ * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
+ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
+ * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
+ */
+ //#define SDCARD_SORT_ALPHA
+
+ // SD Card Sorting options
+ #if ENABLED(SDCARD_SORT_ALPHA)
+ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
+ #define FOLDER_SORTING -1 // -1=above 0=none 1=below
+ #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
+ #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
+ #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+ #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+ #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+ #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
+ // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+ #endif
+
+ // This allows hosts to request long names for files and folders with M33
+ //#define LONG_FILENAME_HOST_SUPPORT
+
+ // Enable this option to scroll long filenames in the SD card menu
+ //#define SCROLL_LONG_FILENAMES
+
+ /**
+ * This option allows you to abort SD printing when any endstop is triggered.
+ * This feature must be enabled with "M540 S1" or from the LCD menu.
+ * To have any effect, endstops must be enabled during SD printing.
+ */
+ //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+
+ /**
+ * This option makes it easier to print the same SD Card file again.
+ * On print completion the LCD Menu will open with the file selected.
+ * You can just click to start the print, or navigate elsewhere.
+ */
+ //#define SD_REPRINT_LAST_SELECTED_FILE
+
+ /**
+ * Auto-report SdCard status with M27 S
+ */
+ //#define AUTO_REPORT_SD_STATUS
+
+ /**
+ * Support for USB thumb drives using an Arduino USB Host Shield or
+ * equivalent MAX3421E breakout board. The USB thumb drive will appear
+ * to Marlin as an SD card.
+ *
+ * The MAX3421E must be assigned the same pins as the SD card reader, with
+ * the following pin mapping:
+ *
+ * SCLK, MOSI, MISO --> SCLK, MOSI, MISO
+ * INT --> SD_DETECT_PIN
+ * SS --> SDSS
+ */
+ //#define USB_FLASH_DRIVE_SUPPORT
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+ #define USB_CS_PIN SDSS
+ #define USB_INTR_PIN SD_DETECT_PIN
+ #endif
+
+ /**
+ * When using a bootloader that supports SD-Firmware-Flashing,
+ * add a menu item to activate SD-FW-Update on the next reboot.
+ *
+ * Requires ATMEGA2560 (Arduino Mega)
+ *
+ * Tested with this bootloader:
+ * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
+ */
+ //#define SD_FIRMWARE_UPDATE
+ #if ENABLED(SD_FIRMWARE_UPDATE)
+ #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF
+ #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0
+ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
+ #endif
+
+ // Add an optimized binary file transfer mode, initiated with 'M28 B1'
+ //#define FAST_FILE_TRANSFER
+
+#endif // SDSUPPORT
+
+/**
+ * Additional options for Graphical Displays
+ *
+ * Use the optimizations here to improve printing performance,
+ * which can be adversely affected by graphical display drawing,
+ * especially when doing several short moves, and when printing
+ * on DELTA and SCARA machines.
+ *
+ * Some of these options may result in the display lagging behind
+ * controller events, as there is a trade-off between reliable
+ * printing performance versus fast display updates.
+ */
+#if HAS_GRAPHICAL_LCD
+ // Show SD percentage next to the progress bar
+ //#define DOGM_SD_PERCENT
+
+ // Enable to save many cycles by drawing a hollow frame on the Info Screen
+ #define XYZ_HOLLOW_FRAME
+
+ // Enable to save many cycles by drawing a hollow frame on Menu Screens
+ #define MENU_HOLLOW_FRAME
+
+ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
+ // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+ //#define USE_BIG_EDIT_FONT
+
+ // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
+ // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+ //#define USE_SMALL_INFOFONT
+
+ // Enable this option and reduce the value to optimize screen updates.
+ // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
+ //#define DOGM_SPI_DELAY_US 5
+
+ // Swap the CW/CCW indicators in the graphics overlay
+ //#define OVERLAY_GFX_REVERSE
+
+ /**
+ * ST7920-based LCDs can emulate a 16 x 4 character display using
+ * the ST7920 character-generator for very fast screen updates.
+ * Enable LIGHTWEIGHT_UI to use this special display mode.
+ *
+ * Since LIGHTWEIGHT_UI has limited space, the position and status
+ * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+ * length of time to display the status message before clearing.
+ *
+ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+ * This will prevent position updates from being displayed.
+ */
+ #if ENABLED(U8GLIB_ST7920)
+ //#define LIGHTWEIGHT_UI
+ #if ENABLED(LIGHTWEIGHT_UI)
+ #define STATUS_EXPIRE_SECONDS 20
+ #endif
+ #endif
+
+ /**
+ * Status (Info) Screen customizations
+ * These options may affect code size and screen render time.
+ * Custom status screens can forcibly override these settings.
+ */
+ //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
+ //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
+ #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
+ #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
+ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
+ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
+ //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
+ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
+ //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
+
+#endif // HAS_GRAPHICAL_LCD
+
+// @section safety
+
+// The hardware watchdog should reset the microcontroller disabling all outputs,
+// in case the firmware gets stuck and doesn't do temperature regulation.
+#define USE_WATCHDOG
+
+#if ENABLED(USE_WATCHDOG)
+ // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
+ // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
+ // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
+ //#define WATCHDOG_RESET_MANUAL
+#endif
+
+// @section lcd
+
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
+//#define BABYSTEPPING
+#if ENABLED(BABYSTEPPING)
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+
+ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+ #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
+ #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+ // Note: Extra time may be added to mitigate controller latency.
+ #endif
+
+ //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
+ #if ENABLED(MOVE_Z_WHEN_IDLE)
+ #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
+ #endif
+
+ //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
+ #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+ //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
+ //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
+ #endif
+#endif
+
+// @section extruder
+
+/**
+ * Linear Pressure Control v1.5
+ *
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
+ * K=0 means advance disabled.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
+ */
+//#define LIN_ADVANCE
+#if ENABLED(LIN_ADVANCE)
+ #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
+ //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
+#endif
+
+// @section leveling
+
+#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+ // Override the mesh area if the automatic (max) area is too large
+ //#define MESH_MIN_X MESH_INSET
+ //#define MESH_MIN_Y MESH_INSET
+ //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+ //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+#endif
+
+/**
+ * Repeatedly attempt G29 leveling until it succeeds.
+ * Stop after G29_MAX_RETRIES attempts.
+ */
+//#define G29_RETRY_AND_RECOVER
+#if ENABLED(G29_RETRY_AND_RECOVER)
+ #define G29_MAX_RETRIES 3
+ #define G29_HALT_ON_FAILURE
+ /**
+ * Specify the GCODE commands that will be executed when leveling succeeds,
+ * between attempts, and after the maximum number of retries have been tried.
+ */
+ #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
+ #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
+ #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
+ /**
+ * Specify an action command to send to the host on a recovery attempt or failure.
+ * Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
+ * The host must be configured to handle the action command.
+ */
+ #define G29_ACTION_ON_RECOVER "probe_rewipe"
+ #define G29_ACTION_ON_FAILURE "probe_failed"
+#endif
+
+// @section extras
+
+//
+// G2/G3 Arc Support
+//
+#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
+#if ENABLED(ARC_SUPPORT)
+ #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
+ #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
+ //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
+ //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
+#endif
+
+// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
+//#define BEZIER_CURVE_SUPPORT
+
+// G38.2 and G38.3 Probe Target
+// Set MULTIPLE_PROBING if you want G38 to double touch
+//#define G38_PROBE_TARGET
+#if ENABLED(G38_PROBE_TARGET)
+ #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
+#endif
+
+// Moves (or segments) with fewer steps than this will be joined with the next move
+#define MIN_STEPS_PER_SEGMENT 6
+
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ * 20 : Minimum for TMC2xxx drivers
+ * 200 : Minimum for A4988 drivers
+ * 400 : Minimum for A5984 drivers
+ * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ * 650 : Minimum for DRV8825 drivers
+ * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ * 1 : Minimum for A4988, A5984, and LV8729 stepper drivers
+ * 2 : Minimum for DRV8825 stepper drivers
+ * 3 : Minimum for TB6600 stepper drivers
+ * 30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * 500000 : Maximum for A4988 stepper driver
+ * 400000 : Maximum for TMC2xxx stepper drivers
+ * 250000 : Maximum for DRV8825 stepper driver
+ * 150000 : Maximum for TB6600 stepper driver
+ * 130000 : Maximum for LV8729 stepper driver
+ * 15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
+
+// @section temperature
+
+// Control heater 0 and heater 1 in parallel.
+//#define HEATERS_PARALLEL
+
+//===========================================================================
+//================================= Buffers =================================
+//===========================================================================
+
+// @section hidden
+
+// The number of linear motions that can be in the plan at any give time.
+// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
+#if ENABLED(SDSUPPORT)
+ #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+#else
+ #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+#endif
+
+// @section serial
+
+// The ASCII buffer for serial input
+#define MAX_CMD_SIZE 96
+#define BUFSIZE 4
+
+// Transmission to Host Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+#define TX_BUFFER_SIZE 0
+
+// Host Receive Buffer Size
+// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+// To use flow control, set this buffer size to at least 1024 bytes.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+//#define RX_BUFFER_SIZE 1024
+
+#if RX_BUFFER_SIZE >= 1024
+ // Enable to have the controller send XON/XOFF control characters to
+ // the host to signal the RX buffer is becoming full.
+ //#define SERIAL_XON_XOFF
+#endif
+
+#if ENABLED(SDSUPPORT)
+ // Enable this option to collect and display the maximum
+ // RX queue usage after transferring a file to SD.
+ //#define SERIAL_STATS_MAX_RX_QUEUED
+
+ // Enable this option to collect and display the number
+ // of dropped bytes after a file transfer to SD.
+ //#define SERIAL_STATS_DROPPED_RX
+#endif
+
+// Enable an emergency-command parser to intercept certain commands as they
+// enter the serial receive buffer, so they cannot be blocked.
+// Currently handles M108, M112, M410
+// Does not work on boards using AT90USB (USBCON) processors!
+//#define EMERGENCY_PARSER
+
+// Bad Serial-connections can miss a received command by sending an 'ok'
+// Therefore some clients abort after 30 seconds in a timeout.
+// Some other clients start sending commands while receiving a 'wait'.
+// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
+//#define NO_TIMEOUTS 1000 // Milliseconds
+
+// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
+//#define ADVANCED_OK
+
+// Printrun may have trouble receiving long strings all at once.
+// This option inserts short delays between lines of serial output.
+#define SERIAL_OVERRUN_PROTECTION
+
+// @section extras
+
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ * 'M106 P T3-255' : Set a secondary speed for
+ * 'M106 P T2' : Use the set secondary speed
+ * 'M106 P T1' : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
+/**
+ * Firmware-based and LCD-controlled retract
+ *
+ * Add G10 / G11 commands for automatic firmware-based retract / recover.
+ * Use M207 and M208 to define parameters for retract / recover.
+ *
+ * Use M209 to enable or disable auto-retract.
+ * With auto-retract enabled, all G1 E moves within the set range
+ * will be converted to firmware-based retract/recover moves.
+ *
+ * Be sure to turn off auto-retract during filament change.
+ *
+ * Note that M207 / M208 / M209 settings are saved to EEPROM.
+ *
+ */
+//#define FWRETRACT
+#if ENABLED(FWRETRACT)
+ #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
+ #if ENABLED(FWRETRACT_AUTORETRACT)
+ #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
+ #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
+ #endif
+ #define RETRACT_LENGTH 3 // Default retract length (positive mm)
+ #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
+ #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)
+ #define RETRACT_ZRAISE 0 // Default retract Z-raise (mm)
+ #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering)
+ #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change)
+ #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s)
+ #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s)
+ #if ENABLED(MIXING_EXTRUDER)
+ //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
+ #endif
+#endif
+
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+ // Z raise distance for tool-change, as needed for some extruders
+ #define TOOLCHANGE_ZRAISE 2 // (mm)
+
+ // Retract and prime filament on tool-change
+ //#define TOOLCHANGE_FILAMENT_SWAP
+ #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+ #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
+ #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
+ #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
+ #endif
+
+ /**
+ * Position to park head during tool change.
+ * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+ */
+ //#define TOOLCHANGE_PARK
+ #if ENABLED(TOOLCHANGE_PARK)
+ #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
+ #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
+ #endif
+#endif
+
+/**
+ * Advanced Pause
+ * Experimental feature for filament change support and for parking the nozzle when paused.
+ * Adds the GCode M600 for initiating filament change.
+ * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
+ *
+ * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
+ * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
+ */
+//#define ADVANCED_PAUSE_FEATURE
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+ #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
+ #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
+ // This short retract is done immediately, before parking the nozzle.
+ #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+ #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
+ // For Bowden, the full length of the tube and nozzle.
+ // For direct drive, the full length of the nozzle.
+ // Set to 0 for manual unloading.
+ #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
+ #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
+ // 0 to disable start loading and skip to fast load only
+ #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+ #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
+ // For Bowden, the full length of the tube and nozzle.
+ // For direct drive, the full length of the nozzle.
+ //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
+ #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+ #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
+ // Set to 0 for manual extrusion.
+ // Filament can be extruded repeatedly from the Filament Change menu
+ // until extrusion is consistent, and to purge old filament.
+
+ // Filament Unload does a Retract, Delay, and Purge first:
+ #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
+ #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
+ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
+
+ #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
+ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
+ #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
+
+ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
+ //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
+
+ //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+ //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+#endif
+
+// @section tmc
+
+/**
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
+ */
+#if HAS_DRIVER(TMC26X)
+
+ #define X_MAX_CURRENT 1000 // in mA
+ #define X_SENSE_RESISTOR 91 // in mOhms
+ #define X_MICROSTEPS 16 // number of microsteps
+
+ #define X2_MAX_CURRENT 1000
+ #define X2_SENSE_RESISTOR 91
+ #define X2_MICROSTEPS 16
+
+ #define Y_MAX_CURRENT 1000
+ #define Y_SENSE_RESISTOR 91
+ #define Y_MICROSTEPS 16
+
+ #define Y2_MAX_CURRENT 1000
+ #define Y2_SENSE_RESISTOR 91
+ #define Y2_MICROSTEPS 16
+
+ #define Z_MAX_CURRENT 1000
+ #define Z_SENSE_RESISTOR 91
+ #define Z_MICROSTEPS 16
+
+ #define Z2_MAX_CURRENT 1000
+ #define Z2_SENSE_RESISTOR 91
+ #define Z2_MICROSTEPS 16
+
+ #define Z3_MAX_CURRENT 1000
+ #define Z3_SENSE_RESISTOR 91
+ #define Z3_MICROSTEPS 16
+
+ #define E0_MAX_CURRENT 1000
+ #define E0_SENSE_RESISTOR 91
+ #define E0_MICROSTEPS 16
+
+ #define E1_MAX_CURRENT 1000
+ #define E1_SENSE_RESISTOR 91
+ #define E1_MICROSTEPS 16
+
+ #define E2_MAX_CURRENT 1000
+ #define E2_SENSE_RESISTOR 91
+ #define E2_MICROSTEPS 16
+
+ #define E3_MAX_CURRENT 1000
+ #define E3_SENSE_RESISTOR 91
+ #define E3_MICROSTEPS 16
+
+ #define E4_MAX_CURRENT 1000
+ #define E4_SENSE_RESISTOR 91
+ #define E4_MICROSTEPS 16
+
+ #define E5_MAX_CURRENT 1000
+ #define E5_SENSE_RESISTOR 91
+ #define E5_MICROSTEPS 16
+
+#endif // TMC26X
+
+// @section tmc_smart
+
+/**
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ * To use the reading capabilities, also connect #_SERIAL_RX_PIN
+ * to PDN_UART without a resistor.
+ * The drivers can also be used with hardware serial.
+ *
+ * TMCStepper library is required for connected TMC stepper drivers.
+ * https://github.com/teemuatlut/TMCStepper
+ */
+#if HAS_TRINAMIC
+
+ #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130
+ #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
+ #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
+
+ #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current.
+ #define X_MICROSTEPS 16 // 0..256
+
+ #define Y_CURRENT 800
+ #define Y_MICROSTEPS 16
+
+ #define Z_CURRENT 800
+ #define Z_MICROSTEPS 16
+
+ #define X2_CURRENT 800
+ #define X2_MICROSTEPS 16
+
+ #define Y2_CURRENT 800
+ #define Y2_MICROSTEPS 16
+
+ #define Z2_CURRENT 800
+ #define Z2_MICROSTEPS 16
+
+ #define Z3_CURRENT 800
+ #define Z3_MICROSTEPS 16
+
+ #define E0_CURRENT 800
+ #define E0_MICROSTEPS 16
+
+ #define E1_CURRENT 800
+ #define E1_MICROSTEPS 16
+
+ #define E2_CURRENT 800
+ #define E2_MICROSTEPS 16
+
+ #define E3_CURRENT 800
+ #define E3_MICROSTEPS 16
+
+ #define E4_CURRENT 800
+ #define E4_MICROSTEPS 16
+
+ #define E5_CURRENT 800
+ #define E5_MICROSTEPS 16
+
+ /**
+ * Override default SPI pins for TMC2130 and TMC2660 drivers here.
+ * The default pins can be found in your board's pins file.
+ */
+ //#define X_CS_PIN -1
+ //#define Y_CS_PIN -1
+ //#define Z_CS_PIN -1
+ //#define X2_CS_PIN -1
+ //#define Y2_CS_PIN -1
+ //#define Z2_CS_PIN -1
+ //#define Z3_CS_PIN -1
+ //#define E0_CS_PIN -1
+ //#define E1_CS_PIN -1
+ //#define E2_CS_PIN -1
+ //#define E3_CS_PIN -1
+ //#define E4_CS_PIN -1
+ //#define E5_CS_PIN -1
+
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
+ /**
+ * Use Trinamic's ultra quiet stepping mode.
+ * When disabled, Marlin will use spreadCycle stepping mode.
+ */
+ #define STEALTHCHOP_XY
+ #define STEALTHCHOP_Z
+ #define STEALTHCHOP_E
+
+ /**
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
+ */
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+
+ /**
+ * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
+ * like overtemperature and short to ground. TMC2208 requires hardware serial.
+ * In the case of overtemperature Marlin can decrease the driver current until error condition clears.
+ * Other detected conditions can be used to stop the current print.
+ * Relevant g-codes:
+ * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
+ * M911 - Report stepper driver overtemperature pre-warn condition.
+ * M912 - Clear stepper driver overtemperature pre-warn condition flag.
+ * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+ */
+ //#define MONITOR_DRIVER_STATUS
+
+ #if ENABLED(MONITOR_DRIVER_STATUS)
+ #define CURRENT_STEP_DOWN 50 // [mA]
+ #define REPORT_CURRENT_CHANGE
+ #define STOP_ON_ERROR
+ #endif
+
+ /**
+ * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
+ * This mode allows for faster movements at the expense of higher noise levels.
+ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
+ * M913 X/Y/Z/E to live tune the setting
+ */
+ //#define HYBRID_THRESHOLD
+
+ #define X_HYBRID_THRESHOLD 100 // [mm/s]
+ #define X2_HYBRID_THRESHOLD 100
+ #define Y_HYBRID_THRESHOLD 100
+ #define Y2_HYBRID_THRESHOLD 100
+ #define Z_HYBRID_THRESHOLD 3
+ #define Z2_HYBRID_THRESHOLD 3
+ #define Z3_HYBRID_THRESHOLD 3
+ #define E0_HYBRID_THRESHOLD 30
+ #define E1_HYBRID_THRESHOLD 30
+ #define E2_HYBRID_THRESHOLD 30
+ #define E3_HYBRID_THRESHOLD 30
+ #define E4_HYBRID_THRESHOLD 30
+ #define E5_HYBRID_THRESHOLD 30
+
+ /**
+ * Use StallGuard2 to sense an obstacle and trigger an endstop.
+ * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
+ * X, Y, and Z homing will always be done in spreadCycle mode.
+ *
+ * X/Y/Z_STALL_SENSITIVITY is used for tuning the trigger sensitivity.
+ * Higher values make the system LESS sensitive.
+ * Lower value make the system MORE sensitive.
+ * Too low values can lead to false positives, while too high values will collide the axis without triggering.
+ * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+ * M914 X/Y/Z to live tune the setting
+ */
+ //#define SENSORLESS_HOMING // TMC2130 only
+
+ /**
+ * Use StallGuard2 to probe the bed with the nozzle.
+ *
+ * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
+ * to move the Z axis. Take extreme care when attempting to enable this feature.
+ */
+ //#define SENSORLESS_PROBING // TMC2130 only
+
+ #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+ #define X_STALL_SENSITIVITY 8
+ #define Y_STALL_SENSITIVITY 8
+ //#define Z_STALL_SENSITIVITY 8
+ #endif
+
+ /**
+ * Enable M122 debugging command for TMC stepper drivers.
+ * M122 S0/1 will enable continous reporting.
+ */
+ //#define TMC_DEBUG
+
+ /**
+ * M915 Z Axis Calibration
+ *
+ * - Adjust Z stepper current,
+ * - Drive the Z axis to its physical maximum, and
+ * - Home Z to account for the lost steps.
+ *
+ * Use M915 Snn to specify the current.
+ * Use M925 Znn to add extra Z height to Z_MAX_POS.
+ */
+ //#define TMC_Z_CALIBRATION
+ #if ENABLED(TMC_Z_CALIBRATION)
+ #define CALIBRATION_CURRENT 250
+ #define CALIBRATION_EXTRA_HEIGHT 10
+ #endif
+
+ /**
+ * You can set your own advanced settings by filling in predefined functions.
+ * A list of available functions can be found on the library github page
+ * https://github.com/teemuatlut/TMC2130Stepper
+ * https://github.com/teemuatlut/TMC2208Stepper
+ *
+ * Example:
+ * #define TMC_ADV() { \
+ * stepperX.diag0_temp_prewarn(1); \
+ * stepperY.interpolate(0); \
+ * }
+ */
+ #define TMC_ADV() { }
+
+#endif // HAS_TRINAMIC
+
+// @section L6470
+
+/**
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
+ */
+#if HAS_DRIVER(L6470)
+
+ #define X_MICROSTEPS 16 // number of microsteps
+ #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off
+ #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall
+
+ #define X2_MICROSTEPS 16
+ #define X2_OVERCURRENT 2000
+ #define X2_STALLCURRENT 1500
+
+ #define Y_MICROSTEPS 16
+ #define Y_OVERCURRENT 2000
+ #define Y_STALLCURRENT 1500
+
+ #define Y2_MICROSTEPS 16
+ #define Y2_OVERCURRENT 2000
+ #define Y2_STALLCURRENT 1500
+
+ #define Z_MICROSTEPS 16
+ #define Z_OVERCURRENT 2000
+ #define Z_STALLCURRENT 1500
+
+ #define Z2_MICROSTEPS 16
+ #define Z2_OVERCURRENT 2000
+ #define Z2_STALLCURRENT 1500
+
+ #define Z3_MICROSTEPS 16
+ #define Z3_OVERCURRENT 2000
+ #define Z3_STALLCURRENT 1500
+
+ #define E0_MICROSTEPS 16
+ #define E0_OVERCURRENT 2000
+ #define E0_STALLCURRENT 1500
+
+ #define E1_MICROSTEPS 16
+ #define E1_OVERCURRENT 2000
+ #define E1_STALLCURRENT 1500
+
+ #define E2_MICROSTEPS 16
+ #define E2_OVERCURRENT 2000
+ #define E2_STALLCURRENT 1500
+
+ #define E3_MICROSTEPS 16
+ #define E3_OVERCURRENT 2000
+ #define E3_STALLCURRENT 1500
+
+ #define E4_MICROSTEPS 16
+ #define E4_OVERCURRENT 2000
+ #define E4_STALLCURRENT 1500
+
+ #define E5_MICROSTEPS 16
+ #define E5_OVERCURRENT 2000
+ #define E5_STALLCURRENT 1500
+
+#endif // L6470
+
+/**
+ * TWI/I2C BUS
+ *
+ * This feature is an EXPERIMENTAL feature so it shall not be used on production
+ * machines. Enabling this will allow you to send and receive I2C data from slave
+ * devices on the bus.
+ *
+ * ; Example #1
+ * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
+ * ; It uses multiple M260 commands with one B arg
+ * M260 A99 ; Target slave address
+ * M260 B77 ; M
+ * M260 B97 ; a
+ * M260 B114 ; r
+ * M260 B108 ; l
+ * M260 B105 ; i
+ * M260 B110 ; n
+ * M260 S1 ; Send the current buffer
+ *
+ * ; Example #2
+ * ; Request 6 bytes from slave device with address 0x63 (99)
+ * M261 A99 B5
+ *
+ * ; Example #3
+ * ; Example serial output of a M261 request
+ * echo:i2c-reply: from:99 bytes:5 data:hello
+ */
+
+// @section i2cbus
+
+//#define EXPERIMENTAL_I2CBUS
+#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
+
+// @section extras
+
+/**
+ * Canon Hack Development Kit
+ * http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+ */
+//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
+#if PIN_EXISTS(CHDK)
+ #define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
+#endif
+
+/**
+ * Spindle & Laser control
+ *
+ * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
+ * to set spindle speed, spindle direction, and laser power.
+ *
+ * SuperPid is a router/spindle speed controller used in the CNC milling community.
+ * Marlin can be used to turn the spindle on and off. It can also be used to set
+ * the spindle speed from 5,000 to 30,000 RPM.
+ *
+ * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
+ * hardware PWM pin for the speed control and a pin for the rotation direction.
+ *
+ * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
+ */
+//#define SPINDLE_LASER_ENABLE
+#if ENABLED(SPINDLE_LASER_ENABLE)
+
+ #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed
+ #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power
+ #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower
+ #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power
+ #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop
+ #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction
+ #define SPINDLE_INVERT_DIR false
+ #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction
+
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+
+ //#define SPEED_POWER_SLOPE 0.3922
+ //#define SPEED_POWER_INTERCEPT 0
+ //#define SPEED_POWER_MIN 10
+ //#define SPEED_POWER_MAX 100 // 0-100%
+#endif
+
+/**
+ * Filament Width Sensor
+ *
+ * Measures the filament width in real-time and adjusts
+ * flow rate to compensate for any irregularities.
+ *
+ * Also allows the measured filament diameter to set the
+ * extrusion rate, so the slicer only has to specify the
+ * volume.
+ *
+ * Only a single extruder is supported at this time.
+ *
+ * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
+ * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
+ * 301 RAMBO : Analog input 3
+ *
+ * Note: May require analog pins to be defined for other boards.
+ */
+//#define FILAMENT_WIDTH_SENSOR
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+ #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
+ #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
+
+ #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
+ #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
+
+ #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
+
+ // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
+ //#define FILAMENT_LCD_DISPLAY
+#endif
+
+/**
+ * CNC Coordinate Systems
+ *
+ * Enables G53 and G54-G59.3 commands to select coordinate systems
+ * and G92.1 to reset the workspace to native machine space.
+ */
+//#define CNC_COORDINATE_SYSTEMS
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
+/**
+ * Auto-report temperatures with M155 S
+ */
+#define AUTO_REPORT_TEMPERATURES
+
+/**
+ * Include capabilities in M115 output
+ */
+#define EXTENDED_CAPABILITIES_REPORT
+
+/**
+ * Disable all Volumetric extrusion options
+ */
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+ /**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */
+ //#define VOLUMETRIC_DEFAULT_ON
+#endif
+
+/**
+ * Enable this option for a leaner build of Marlin that removes all
+ * workspace offsets, simplifying coordinate transformations, leveling, etc.
+ *
+ * - M206 and M428 are disabled.
+ * - G92 will revert to its behavior from Marlin 1.0.
+ */
+//#define NO_WORKSPACE_OFFSETS
+
+/**
+ * Set the number of proportional font spaces required to fill up a typical character space.
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
+ *
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
+ * Otherwise, adjust according to your client and font.
+ */
+#define PROPORTIONAL_FONT_RATIO 1.0
+
+/**
+ * Spend 28 bytes of SRAM to optimize the GCode parser
+ */
+#define FASTER_GCODE_PARSER
+
+/**
+ * CNC G-code options
+ * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
+ */
+//#define PAREN_COMMENTS // Support for parentheses-delimited comments
+//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+
+// Enable and set a (default) feedrate for all G0 moves
+//#define G0_FEEDRATE 3000 // (mm/m)
+#ifdef G0_FEEDRATE
+ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
+#endif
+
+/**
+ * G-code Macros
+ *
+ * Add G-codes M810-M819 to define and run G-code macros.
+ * Macros are not saved to EEPROM.
+ */
+//#define GCODE_MACROS
+#if ENABLED(GCODE_MACROS)
+ #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
+ #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
+#endif
+
+/**
+ * User-defined menu items that execute custom GCode
+ */
+//#define CUSTOM_USER_MENUS
+#if ENABLED(CUSTOM_USER_MENUS)
+ //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
+ #define USER_SCRIPT_DONE "M117 User Script Done"
+ #define USER_SCRIPT_AUDIBLE_FEEDBACK
+ //#define USER_SCRIPT_RETURN // Return to status screen after a script
+
+ #define USER_DESC_1 "Home & UBL Info"
+ #define USER_GCODE_1 "G28\nG29 W"
+
+ #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
+ #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+
+ #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
+ #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+
+ #define USER_DESC_4 "Heat Bed/Home/Level"
+ #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+
+ #define USER_DESC_5 "Home & Info"
+ #define USER_GCODE_5 "G28\nM503"
+#endif
+
+/**
+ * Specify an action command to send to the host when the printer is killed.
+ * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_KILL "poweroff"
+
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
+//===========================================================================
+//====================== I2C Position Encoder Settings ======================
+//===========================================================================
+
+/**
+ * I2C position encoders for closed loop control.
+ * Developed by Chris Barr at Aus3D.
+ *
+ * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
+ * Github: https://github.com/Aus3D/MagneticEncoder
+ *
+ * Supplier: http://aus3d.com.au/magnetic-encoder-module
+ * Alternative Supplier: http://reliabuild3d.com/
+ *
+ * Reilabuild encoders have been modified to improve reliability.
+ */
+
+//#define I2C_POSITION_ENCODERS
+#if ENABLED(I2C_POSITION_ENCODERS)
+
+ #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
+ // encoders supported currently.
+
+ #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
+ #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS.
+ #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
+ // I2CPE_ENC_TYPE_ROTARY.
+ #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
+ // 1mm poles. For linear encoders this is ticks / mm,
+ // for rotary encoders this is ticks / revolution.
+ //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
+ // steps per full revolution (motor steps/rev * microstepping)
+ //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
+ #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
+ #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
+ // printer will attempt to correct the error; errors
+ // smaller than this are ignored to minimize effects of
+ // measurement noise / latency (filter).
+
+ #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
+ #define I2CPE_ENC_2_AXIS Y_AXIS
+ #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
+ #define I2CPE_ENC_2_TICKS_UNIT 2048
+ //#define I2CPE_ENC_2_TICKS_REV (16 * 200)
+ //#define I2CPE_ENC_2_INVERT
+ #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP
+ #define I2CPE_ENC_2_EC_THRESH 0.10
+
+ #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
+ #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
+
+ #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
+ #define I2CPE_ENC_4_AXIS E_AXIS
+
+ #define I2CPE_ENC_5_ADDR 34 // Encoder 5.
+ #define I2CPE_ENC_5_AXIS E_AXIS
+
+ // Default settings for encoders which are enabled, but without settings configured above.
+ #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
+ #define I2CPE_DEF_ENC_TICKS_UNIT 2048
+ #define I2CPE_DEF_TICKS_REV (16 * 200)
+ #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
+ #define I2CPE_DEF_EC_THRESH 0.1
+
+ //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
+ // axis after which the printer will abort. Comment out to
+ // disable abort behaviour.
+
+ #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
+ // for this amount of time (in ms) before the encoder
+ // is trusted again.
+
+ /**
+ * Position is checked every time a new command is executed from the buffer but during long moves,
+ * this setting determines the minimum update time between checks. A value of 100 works well with
+ * error rolling average when attempting to correct only for skips and not for vibration.
+ */
+ #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks.
+
+ // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
+ #define I2CPE_ERR_ROLLING_AVERAGE
+
+#endif // I2C_POSITION_ENCODERS
+
+/**
+ * MAX7219 Debug Matrix
+ *
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ */
+//#define MAX7219_DEBUG
+#if ENABLED(MAX7219_DEBUG)
+ #define MAX7219_CLK_PIN 64
+ #define MAX7219_DIN_PIN 57
+ #define MAX7219_LOAD_PIN 44
+
+ //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
+ #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
+ #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
+ #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
+ // connector at: right=0 bottom=-90 top=90 left=180
+ //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
+
+ /**
+ * Sample debug features
+ * If you add more debug displays, be careful to avoid conflicts!
+ */
+ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
+ #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
+ #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
+
+ #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
+ // If you experience stuttering, reboots, etc. this option can reveal how
+ // tweaks made to the configuration are affecting the printer in real-time.
+#endif
+
+/**
+ * NanoDLP Sync support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ */
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+ //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
+ // Default behaviour is limited to Z axis only.
+#endif
+
+/**
+ * WiFi Support (Espressif ESP32 WiFi)
+ */
+//#define WIFISUPPORT
+#if ENABLED(WIFISUPPORT)
+ #define WIFI_SSID "Wifi SSID"
+ #define WIFI_PWD "Wifi Password"
+#endif
+
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration.h b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
index 0711f8db63..0930fbe49a 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
index ca5562e682..c9feeed939 100644
--- a/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
+++ b/Marlin/src/config/examples/Mks/Sbase/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -605,6 +597,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1396,10 +1395,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
index d8f49e6484..0c317a5848 100644
--- a/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
+++ b/Marlin/src/config/examples/RepRapPro/Huxley/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -708,6 +709,14 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -716,10 +725,13 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1910,6 +1922,15 @@ Black rubber belt(MXL), 18 - tooth aluminium pulley : 87.489 step per mm (Huxley
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
index a1af174f04..87ee0ca9c4 100644
--- a/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
+++ b/Marlin/src/config/examples/RepRapWorld/Megatronics/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/RigidBot/Configuration.h b/Marlin/src/config/examples/RigidBot/Configuration.h
index 4f94bd8dbd..dc68e13d6e 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration.h
@@ -308,6 +308,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -327,7 +328,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1 // DGlass3D = 5; RigidBot = 1; 3DSv6 = 5
#define TEMP_SENSOR_1 0
@@ -666,6 +667,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -674,10 +683,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/RigidBot/Configuration_adv.h b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
index f9491f3aaf..a5f8848f75 100644
--- a/Marlin/src/config/examples/RigidBot/Configuration_adv.h
+++ b/Marlin/src/config/examples/RigidBot/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/SCARA/Configuration.h b/Marlin/src/config/examples/SCARA/Configuration.h
index 434eef9c30..4deb779eac 100644
--- a/Marlin/src/config/examples/SCARA/Configuration.h
+++ b/Marlin/src/config/examples/SCARA/Configuration.h
@@ -336,6 +336,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -355,7 +356,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -681,6 +682,14 @@
#define DEFAULT_RETRACT_ACCELERATION 2000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -689,10 +698,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 5.0
-#define DEFAULT_YJERK 5.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 3.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 5.0
+ #define DEFAULT_YJERK 5.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 3.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1874,6 +1886,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/SCARA/Configuration_adv.h b/Marlin/src/config/examples/SCARA/Configuration_adv.h
index d6fea7efdf..68795f23e4 100644
--- a/Marlin/src/config/examples/SCARA/Configuration_adv.h
+++ b/Marlin/src/config/examples/SCARA/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/STM32F10/Configuration.h b/Marlin/src/config/examples/STM32F10/Configuration.h
index ef7075351f..03c5265ab4 100644
--- a/Marlin/src/config/examples/STM32F10/Configuration.h
+++ b/Marlin/src/config/examples/STM32F10/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#warning temp_sensor set to 998/999 (fake)
#define TEMP_SENSOR_0 999
@@ -670,6 +671,14 @@
#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -678,10 +687,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 13.0
-#define DEFAULT_YJERK 13.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 13.0
+ #define DEFAULT_YJERK 13.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1863,6 +1875,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/STM32F4/Configuration.h b/Marlin/src/config/examples/STM32F4/Configuration.h
index ff5a5b3ed7..ffb4feeae1 100644
--- a/Marlin/src/config/examples/STM32F4/Configuration.h
+++ b/Marlin/src/config/examples/STM32F4/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration.h b/Marlin/src/config/examples/Sanguinololu/Configuration.h
index 314f658899..f4f2746bb6 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -699,6 +700,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -707,10 +716,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1892,6 +1904,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
index c26e644dd8..6d31b4bd49 100644
--- a/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
+++ b/Marlin/src/config/examples/Sanguinololu/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/TheBorg/Configuration.h b/Marlin/src/config/examples/TheBorg/Configuration.h
index bbfb8e750b..9a735d83a8 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/TheBorg/Configuration_adv.h b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
index 9be10e846f..2e380354cf 100644
--- a/Marlin/src/config/examples/TheBorg/Configuration_adv.h
+++ b/Marlin/src/config/examples/TheBorg/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration.h b/Marlin/src/config/examples/TinyBoy2/Configuration.h
index ce9d0054a9..7ba6877326 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration.h
@@ -327,6 +327,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -346,7 +347,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -719,6 +720,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -727,10 +736,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1917,6 +1929,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
index 96e7ec8ba3..e81fe0cd63 100644
--- a/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
+++ b/Marlin/src/config/examples/TinyBoy2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Tronxy/X1/Configuration.h b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
index 23388a90f0..3e87c2f0ed 100644
--- a/Marlin/src/config/examples/Tronxy/X1/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X1/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 11
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 20.0
-#define DEFAULT_YJERK 20.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 20.0
+ #define DEFAULT_YJERK 20.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
index 28376ab768..a0d2107fbc 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 6
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 15.0
-#define DEFAULT_YJERK 15.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 15.0
+ #define DEFAULT_YJERK 15.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1865,6 +1877,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
index e7d74011b1..b1024ff87c 100644
--- a/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
+++ b/Marlin/src/config/examples/Tronxy/X3A/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
index 73f9bc92ec..e7f32ef694 100644
--- a/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/X5S/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 18.0
-#define DEFAULT_YJERK 18.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 18.0
+ #define DEFAULT_YJERK 18.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
index 4188237a7f..b932f1e7b0 100644
--- a/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
+++ b/Marlin/src/config/examples/Tronxy/XY100/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -679,6 +680,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -687,10 +696,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 20.0
-#define DEFAULT_YJERK 20.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 20.0
+ #define DEFAULT_YJERK 20.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1872,6 +1884,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
index bd84443c1e..8edbafe432 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
index eaf8dbdc79..41e3faac19 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim1/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1389,10 +1388,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
index f7c3d6afe2..e144765503 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
index 51b11234c2..9bd63d47d0 100644
--- a/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
+++ b/Marlin/src/config/examples/UltiMachine/Archim2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/VORONDesign/Configuration.h b/Marlin/src/config/examples/VORONDesign/Configuration.h
new file mode 100644
index 0000000000..816f56ce00
--- /dev/null
+++ b/Marlin/src/config/examples/VORONDesign/Configuration.h
@@ -0,0 +1,2049 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Configuration.h
+ *
+ * Basic settings such as:
+ *
+ * - Type of electronics
+ * - Type of temperature sensor
+ * - Printer geometry
+ * - Endstop configuration
+ * - LCD controller
+ * - Extra features
+ *
+ * Advanced settings can be found in Configuration_adv.h
+ *
+ */
+#define CONFIGURATION_H_VERSION 020000
+
+//===========================================================================
+//============================= Getting Started =============================
+//===========================================================================
+
+/**
+ * Here are some standard links for getting your machine calibrated:
+ *
+ * http://reprap.org/wiki/Calibration
+ * http://youtu.be/wAL9d7FgInk
+ * http://calculator.josefprusa.cz
+ * http://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
+ * http://www.thingiverse.com/thing:5573
+ * https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ * http://www.thingiverse.com/thing:298812
+ */
+
+//===========================================================================
+//============================= DELTA Printer ===============================
+//===========================================================================
+// For a Delta printer start with one of the configuration files in the
+// config/examples/delta directory and customize for your machine.
+//
+
+//===========================================================================
+//============================= SCARA Printer ===============================
+//===========================================================================
+// For a SCARA printer start with the configuration files in
+// config/examples/SCARA and customize for your machine.
+//
+
+// @section info
+
+// User-specified version info of this build to display in [Pronterface, etc] terminal window during
+// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
+// build by the user have been successfully uploaded into firmware.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define SHOW_BOOTSCREEN
+#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
+#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
+
+/**
+ * *** VENDORS PLEASE READ ***
+ *
+ * Marlin allows you to add a custom boot image for Graphical LCDs.
+ * With this option Marlin will first show your custom screen followed
+ * by the standard Marlin logo with version number and web URL.
+ *
+ * We encourage you to take advantage of this new feature and we also
+ * respectfully request that you retain the unmodified Marlin boot screen.
+ */
+
+// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
+#define SHOW_CUSTOM_BOOTSCREEN
+
+// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
+// @section machine
+
+/**
+ * Select the serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
+#define SERIAL_PORT 0
+
+/**
+ * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if available.
+ *
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ */
+//#define SERIAL_PORT_2 -1
+
+/**
+ * This setting determines the communication speed of the printer.
+ *
+ * 250000 works in most cases, but you might try a lower speed if
+ * you commonly experience drop-outs during host printing.
+ * You may try up to 1000000 to speed up SD file transfer.
+ *
+ * :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
+ */
+#define BAUDRATE 115200
+
+// Enable the Bluetooth serial interface on AT90USB devices
+//#define BLUETOOTH
+
+// The following define selects which electronics board you have.
+// Please choose the name from boards.h that matches your setup
+#ifndef MOTHERBOARD
+ #define MOTHERBOARD BOARD_VORON
+#endif
+
+// Optional custom name for your RepStrap or other custom machine
+// Displayed in the LCD "Ready" message
+#define CUSTOM_MACHINE_NAME "VORON 2.0"
+
+// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
+// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
+//#define MACHINE_UUID "00000000-0000-0000-0000-000000000000"
+
+// @section extruder
+
+// This defines the number of extruders
+// :[1, 2, 3, 4, 5, 6]
+#define EXTRUDERS 2
+
+// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
+#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
+
+// For Cyclops or any "multi-extruder" that shares a single nozzle.
+//#define SINGLENOZZLE
+
+/**
+ * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
+ *
+ * This device allows one stepper driver on a control board to drive
+ * two to eight stepper motors, one at a time, in a manner suitable
+ * for extruders.
+ *
+ * This option only allows the multiplexer to switch on tool-change.
+ * Additional options to configure custom E moves are pending.
+ */
+//#define MK2_MULTIPLEXER
+#if ENABLED(MK2_MULTIPLEXER)
+ // Override the default DIO selector pins here, if needed.
+ // Some pins files may provide defaults for these pins.
+ //#define E_MUX0_PIN 40 // Always Required
+ //#define E_MUX1_PIN 42 // Needed for 3 to 8 inputs
+ //#define E_MUX2_PIN 44 // Needed for 5 to 8 inputs
+#endif
+
+// A dual extruder that uses a single stepper motor
+//#define SWITCHING_EXTRUDER
+#if ENABLED(SWITCHING_EXTRUDER)
+ #define SWITCHING_EXTRUDER_SERVO_NR 0
+ #define SWITCHING_EXTRUDER_SERVO_ANGLES { 0, 90 } // Angles for E0, E1[, E2, E3]
+ #if EXTRUDERS > 3
+ #define SWITCHING_EXTRUDER_E23_SERVO_NR 1
+ #endif
+#endif
+
+// A dual-nozzle that uses a servomotor to raise/lower one of the nozzles
+//#define SWITCHING_NOZZLE
+#if ENABLED(SWITCHING_NOZZLE)
+ #define SWITCHING_NOZZLE_SERVO_NR 0
+ #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 } // Angles for E0, E1
+#endif
+
+/**
+ * Two separate X-carriages with extruders that connect to a moving part
+ * via a magnetic docking mechanism. Requires SOL1_PIN and SOL2_PIN.
+ */
+//#define PARKING_EXTRUDER
+#if ENABLED(PARKING_EXTRUDER)
+ #define PARKING_EXTRUDER_SOLENOIDS_INVERT // If enabled, the solenoid is NOT magnetized with applied voltage
+ #define PARKING_EXTRUDER_SOLENOIDS_PINS_ACTIVE LOW // LOW or HIGH pin signal energizes the coil
+ #define PARKING_EXTRUDER_SOLENOIDS_DELAY 250 // Delay (ms) for magnetic field. No delay if 0 or not defined.
+ #define PARKING_EXTRUDER_PARKING_X { -78, 184 } // X positions for parking the extruders
+ #define PARKING_EXTRUDER_GRAB_DISTANCE 1 // (mm) Distance to move beyond the parking point to grab the extruder
+ //#define MANUAL_SOLENOID_CONTROL // Manual control of docking solenoids with M380 S / M381
+#endif
+
+/**
+ * Switching Toolhead
+ *
+ * Support for swappable and dockable toolheads, such as
+ * the E3D Tool Changer. Toolheads are locked with a servo.
+ */
+//#define SWITCHING_TOOLHEAD
+#if ENABLED(SWITCHING_TOOLHEAD)
+ #define SWITCHING_TOOLHEAD_SERVO_NR 2 // Index of the servo connector
+ #define SWITCHING_TOOLHEAD_SERVO_ANGLES { 0, 180 } // (degrees) Angles for Lock, Unlock
+ #define SWITCHING_TOOLHEAD_Y_POS 235 // (mm) Y position of the toolhead dock
+ #define SWITCHING_TOOLHEAD_Y_SECURITY 10 // (mm) Security distance Y axis
+ #define SWITCHING_TOOLHEAD_Y_CLEAR 60 // (mm) Minimum distance from dock for unobstructed X axis
+ #define SWITCHING_TOOLHEAD_X_POS { 215, 0 } // (mm) X positions for parking the extruders
+#endif
+
+/**
+ * "Mixing Extruder"
+ * - Adds G-codes M163 and M164 to set and "commit" the current mix factors.
+ * - Extends the stepping routines to move multiple steppers in proportion to the mix.
+ * - Optional support for Repetier Firmware's 'M164 S' supporting virtual tools.
+ * - This implementation supports up to two mixing extruders.
+ * - Enable DIRECT_MIXING_IN_G1 for M165 and mixing in G1 (from Pia Taubert's reference implementation).
+ */
+//#define MIXING_EXTRUDER
+#if ENABLED(MIXING_EXTRUDER)
+ #define MIXING_STEPPERS 2 // Number of steppers in your mixing extruder
+ #define MIXING_VIRTUAL_TOOLS 16 // Use the Virtual Tool method with M163 and M164
+ //#define DIRECT_MIXING_IN_G1 // Allow ABCDHI mix factors in G1 movement commands
+#endif
+
+// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
+// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
+// For the other hotends it is their distance from the extruder 0 hotend.
+#define HOTEND_OFFSET_X {0.0, -18.00} // (mm) relative X-offset for each nozzle
+//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
+//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
+
+// @section machine
+
+/**
+ * Select your power supply here. Use 0 if you haven't connected the PS_ON_PIN
+ *
+ * 0 = No Power Switch
+ * 1 = ATX
+ * 2 = X-Box 360 203Watts (the blue wire connected to PS_ON and the red wire to VCC)
+ *
+ * :{ 0:'No power switch', 1:'ATX', 2:'X-Box 360' }
+ */
+#define POWER_SUPPLY 0
+
+#if POWER_SUPPLY > 0
+ // Enable this option to leave the PSU off at startup.
+ // Power to steppers and heaters will need to be turned on with M80.
+ //#define PS_DEFAULT_OFF
+
+ //#define AUTO_POWER_CONTROL // Enable automatic control of the PS_ON pin
+ #if ENABLED(AUTO_POWER_CONTROL)
+ #define AUTO_POWER_FANS // Turn on PSU if fans need power
+ #define AUTO_POWER_E_FANS
+ #define AUTO_POWER_CONTROLLERFAN
+ #define POWER_TIMEOUT 30
+ #endif
+
+#endif
+
+// @section temperature
+
+//===========================================================================
+//============================= Thermal Settings ============================
+//===========================================================================
+
+/**
+ * --NORMAL IS 4.7kohm PULLUP!-- 1kohm pullup can be used on hotend sensor, using correct resistor and table
+ *
+ * Temperature sensors available:
+ *
+ * -4 : thermocouple with AD8495
+ * -3 : thermocouple with MAX31855 (only for sensor 0)
+ * -2 : thermocouple with MAX6675 (only for sensor 0)
+ * -1 : thermocouple with AD595
+ * 0 : not used
+ * 1 : 100k thermistor - best choice for EPCOS 100k (4.7k pullup)
+ * 2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
+ * 3 : Mendel-parts thermistor (4.7k pullup)
+ * 4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
+ * 5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
+ * 501 : 100K Zonestar (Tronxy X3A) Thermistor
+ * 6 : 100k EPCOS - Not as accurate as table 1 (created using a fluke thermocouple) (4.7k pullup)
+ * 7 : 100k Honeywell thermistor 135-104LAG-J01 (4.7k pullup)
+ * 71 : 100k Honeywell thermistor 135-104LAF-J01 (4.7k pullup)
+ * 8 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup)
+ * 9 : 100k GE Sensing AL03006-58.2K-97-G1 (4.7k pullup)
+ * 10 : 100k RS thermistor 198-961 (4.7k pullup)
+ * 11 : 100k beta 3950 1% thermistor (4.7k pullup)
+ * 12 : 100k 0603 SMD Vishay NTCS0603E3104FXT (4.7k pullup) (calibrated for Makibox hot bed)
+ * 13 : 100k Hisens 3950 1% up to 300°C for hotend "Simple ONE " & "Hotend "All In ONE"
+ * 15 : 100k thermistor calibration for JGAurora A5 hotend
+ * 20 : the PT100 circuit found in the Ultimainboard V2.x
+ * 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
+ * 66 : 4.7M High Temperature thermistor from Dyze Design
+ * 70 : the 100K thermistor found in the bq Hephestos 2
+ * 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
+ *
+ * 1k ohm pullup tables - This is atypical, and requires changing out the 4.7k pullup for 1k.
+ * (but gives greater accuracy and more stable PID)
+ * 51 : 100k thermistor - EPCOS (1k pullup)
+ * 52 : 200k thermistor - ATC Semitec 204GT-2 (1k pullup)
+ * 55 : 100k thermistor - ATC Semitec 104GT-2 (Used in ParCan & J-Head) (1k pullup)
+ *
+ * 1047 : Pt1000 with 4k7 pullup
+ * 1010 : Pt1000 with 1k pullup (non standard)
+ * 147 : Pt100 with 4k7 pullup
+ * 110 : Pt100 with 1k pullup (non standard)
+ *
+ * Use these for Testing or Development purposes. NEVER for production machine.
+ * 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
+ * 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
+ *
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ */
+#define TEMP_SENSOR_0 5
+#define TEMP_SENSOR_1 5
+#define TEMP_SENSOR_2 0
+#define TEMP_SENSOR_3 0
+#define TEMP_SENSOR_4 0
+#define TEMP_SENSOR_5 0
+#define TEMP_SENSOR_BED 1
+#define TEMP_SENSOR_CHAMBER 0
+
+// Dummy thermistor constant temperature readings, for use with 998 and 999
+#define DUMMY_THERMISTOR_998_VALUE 25
+#define DUMMY_THERMISTOR_999_VALUE 100
+
+// Use temp sensor 1 as a redundant sensor with sensor 0. If the readings
+// from the two sensors differ too much the print will be aborted.
+//#define TEMP_SENSOR_1_AS_REDUNDANT
+#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
+
+// Extruder temperature must be close to target for this long before M109 returns success
+#define TEMP_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// Bed temperature must be close to target for this long before M190 returns success
+#define TEMP_BED_RESIDENCY_TIME 10 // (seconds)
+#define TEMP_BED_HYSTERESIS 3 // (degC) range of +/- temperatures considered "close" to the target one
+#define TEMP_BED_WINDOW 1 // (degC) Window around target to start the residency timer x degC early.
+
+// The minimal temperature defines the temperature below which the heater will not be enabled It is used
+// to check that the wiring to the thermistor is not broken.
+// Otherwise this would lead to the heater being powered on all the time.
+#define HEATER_0_MINTEMP 5
+#define HEATER_1_MINTEMP 5
+#define HEATER_2_MINTEMP 5
+#define HEATER_3_MINTEMP 5
+#define HEATER_4_MINTEMP 5
+#define HEATER_5_MINTEMP 5
+#define BED_MINTEMP 5
+
+// When temperature exceeds max temp, your heater will be switched off.
+// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
+// You should use MINTEMP for thermistor short/failure protection.
+#define HEATER_0_MAXTEMP 275
+#define HEATER_1_MAXTEMP 275
+#define HEATER_2_MAXTEMP 275
+#define HEATER_3_MAXTEMP 275
+#define HEATER_4_MAXTEMP 275
+#define HEATER_5_MAXTEMP 275
+#define BED_MAXTEMP 150
+
+//===========================================================================
+//============================= PID Settings ================================
+//===========================================================================
+// PID Tuning Guide here: http://reprap.org/wiki/PID_Tuning
+
+// Comment the following line to disable PID and enable bang-bang.
+#define PIDTEMP
+#define BANG_MAX 255 // Limits current to nozzle while in bang-bang mode; 255=full current
+#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
+#define PID_K1 0.95 // Smoothing factor within any PID loop
+#if ENABLED(PIDTEMP)
+ //#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
+ //#define PID_DEBUG // Sends debug data to the serial port.
+ //#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
+ //#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
+ //#define PID_PARAMS_PER_HOTEND // Uses separate PID parameters for each extruder (useful for mismatched extruders)
+ // Set/get with gcode: M301 E[extruder number, 0-2]
+ #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
+ // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
+
+ // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
+
+ // Ultimaker
+ //#define DEFAULT_Kp 22.2
+ //#define DEFAULT_Ki 1.08
+ //#define DEFAULT_Kd 114
+
+ // MakerGear
+ //#define DEFAULT_Kp 7.0
+ //#define DEFAULT_Ki 0.1
+ //#define DEFAULT_Kd 12
+
+ // Mendel Parts V9 on 12V
+ //#define DEFAULT_Kp 63.0
+ //#define DEFAULT_Ki 2.25
+ //#define DEFAULT_Kd 440
+
+ // from VORON
+ #define DEFAULT_Kp 23.72
+ #define DEFAULT_Ki 1.56
+ #define DEFAULT_Kd 90.34
+
+#endif // PIDTEMP
+
+//===========================================================================
+//============================= PID > Bed Temperature Control ===============
+//===========================================================================
+
+/**
+ * PID Bed Heating
+ *
+ * If this option is enabled set PID constants below.
+ * If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
+ *
+ * The PID frequency will be the same as the extruder PWM.
+ * If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
+ * which is fine for driving a square wave into a resistive load and does not significantly
+ * impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
+ * heater. If your configuration is significantly different than this and you don't understand
+ * the issues involved, don't use bed PID until someone else verifies that your hardware works.
+ */
+//#define PIDTEMPBED
+
+//#define BED_LIMIT_SWITCHING
+
+/**
+ * Max Bed Power
+ * Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
+ * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
+ * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
+ */
+#define MAX_BED_POWER 205 // limits duty cycle to bed; 255=full current
+
+#if ENABLED(PIDTEMPBED)
+
+ //#define PID_BED_DEBUG // Sends debug data to the serial port.
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
+ //#define DEFAULT_bedKp 10.00
+ //#define DEFAULT_bedKi .023
+ //#define DEFAULT_bedKd 305.4
+
+ //120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
+ //from pidautotune
+ //#define DEFAULT_bedKp 97.1
+ //#define DEFAULT_bedKi 1.41
+ //#define DEFAULT_bedKd 1675.16
+
+ // FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
+ // Results from VORON
+ #define DEFAULT_bedKp 150.52
+ #define DEFAULT_bedKi 12.25
+ #define DEFAULT_bedKd 462.40
+#endif // PIDTEMPBED
+
+// @section extruder
+
+/**
+ * Prevent extrusion if the temperature is below EXTRUDE_MINTEMP.
+ * Add M302 to set the minimum extrusion temperature and/or turn
+ * cold extrusion prevention on and off.
+ *
+ * *** IT IS HIGHLY RECOMMENDED TO LEAVE THIS OPTION ENABLED! ***
+ */
+#define PREVENT_COLD_EXTRUSION
+#define EXTRUDE_MINTEMP 170
+
+/**
+ * Prevent a single extrusion longer than EXTRUDE_MAXLENGTH.
+ * Note: For Bowden Extruders make this large enough to allow load/unload.
+ */
+#define PREVENT_LENGTHY_EXTRUDE
+#define EXTRUDE_MAXLENGTH 200
+
+//===========================================================================
+//======================== Thermal Runaway Protection =======================
+//===========================================================================
+
+/**
+ * Thermal Protection provides additional protection to your printer from damage
+ * and fire. Marlin always includes safe min and max temperature ranges which
+ * protect against a broken or disconnected thermistor wire.
+ *
+ * The issue: If a thermistor falls out, it will report the much lower
+ * temperature of the air in the room, and the the firmware will keep
+ * the heater on.
+ *
+ * If you get "Thermal Runaway" or "Heating failed" errors the
+ * details can be tuned in Configuration_adv.h
+ */
+
+#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
+#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
+
+//===========================================================================
+//============================= Mechanical Settings =========================
+//===========================================================================
+
+// @section machine
+
+// Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
+// either in the usual order or reversed
+#define COREXY
+//#define COREXZ
+//#define COREYZ
+//#define COREYX
+//#define COREZX
+//#define COREZY
+
+//===========================================================================
+//============================== Endstop Settings ===========================
+//===========================================================================
+
+// @section homing
+
+// Specify here all the endstop connectors that are connected to any endstop or probe.
+// Almost all printers will be using one per axis. Probes will use one or more of the
+// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
+#define USE_XMIN_PLUG
+#define USE_YMIN_PLUG
+#define USE_ZMIN_PLUG
+//#define USE_XMAX_PLUG
+//#define USE_YMAX_PLUG
+//#define USE_ZMAX_PLUG
+
+// Enable pullup for all endstops to prevent a floating state
+#define ENDSTOPPULLUPS
+#if DISABLED(ENDSTOPPULLUPS)
+ // Disable ENDSTOPPULLUPS to set pullups individually
+ #define ENDSTOPPULLUP_XMAX
+ #define ENDSTOPPULLUP_YMAX
+ #define ENDSTOPPULLUP_ZMAX
+ #define ENDSTOPPULLUP_XMIN
+ #define ENDSTOPPULLUP_YMIN
+ #define ENDSTOPPULLUP_ZMIN
+ #define ENDSTOPPULLUP_ZMIN_PROBE
+#endif
+
+// Enable pulldown for all endstops to prevent a floating state
+//#define ENDSTOPPULLDOWNS
+#if DISABLED(ENDSTOPPULLDOWNS)
+ // Disable ENDSTOPPULLDOWNS to set pulldowns individually
+ //#define ENDSTOPPULLDOWN_XMAX
+ //#define ENDSTOPPULLDOWN_YMAX
+ //#define ENDSTOPPULLDOWN_ZMAX
+ //#define ENDSTOPPULLDOWN_XMIN
+ //#define ENDSTOPPULLDOWN_YMIN
+ //#define ENDSTOPPULLDOWN_ZMIN
+ //#define ENDSTOPPULLDOWN_ZMIN_PROBE
+#endif
+
+// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
+#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
+#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
+
+/**
+ * Stepper Drivers
+ *
+ * These settings allow Marlin to tune stepper driver timing and enable advanced options for
+ * stepper drivers that support them. You may also override timing options in Configuration_adv.h.
+ *
+ * A4988 is assumed for unspecified drivers.
+ *
+ * Options: A4988, A5984, DRV8825, LV8729, L6470, TB6560, TB6600, TMC2100,
+ * TMC2130, TMC2130_STANDALONE, TMC2208, TMC2208_STANDALONE,
+ * TMC26X, TMC26X_STANDALONE, TMC2660, TMC2660_STANDALONE,
+ * TMC5130, TMC5130_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE']
+ */
+#define X_DRIVER_TYPE DRV8825
+#define Y_DRIVER_TYPE DRV8825
+#define Z_DRIVER_TYPE DRV8825
+//#define X2_DRIVER_TYPE A4988
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define Z3_DRIVER_TYPE A4988
+#define E0_DRIVER_TYPE DRV8825
+#define E1_DRIVER_TYPE DRV8825
+//#define E2_DRIVER_TYPE A4988
+//#define E3_DRIVER_TYPE A4988
+//#define E4_DRIVER_TYPE A4988
+//#define E5_DRIVER_TYPE A4988
+
+// Enable this feature if all enabled endstop pins are interrupt-capable.
+// This will remove the need to poll the interrupt pins, saving many CPU cycles.
+//#define ENDSTOP_INTERRUPTS_FEATURE
+
+/**
+ * Endstop Noise Threshold
+ *
+ * Enable if your probe or endstops falsely trigger due to noise.
+ *
+ * - Higher values may affect repeatability or accuracy of some bed probes.
+ * - To fix noise install a 100nF ceramic capacitor inline with the switch.
+ * - This feature is not required for common micro-switches mounted on PCBs
+ * based on the Makerbot design, which already have the 100nF capacitor.
+ *
+ * :[2,3,4,5,6,7]
+ */
+//#define ENDSTOP_NOISE_THRESHOLD 2
+
+//=============================================================================
+//============================== Movement Settings ============================
+//=============================================================================
+// @section motion
+
+/**
+ * Default Settings
+ *
+ * These settings can be reset by M502
+ *
+ * Note that if EEPROM is enabled, saved values will override these.
+ */
+
+/**
+ * With this option each E stepper can have its own factors for the
+ * following movement settings. If fewer factors are given than the
+ * total number of extruders, the last value applies to the rest.
+ */
+#define DISTINCT_E_FACTORS
+
+/**
+ * Default Axis Steps Per Unit (steps/mm)
+ * Override with M92
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 400, 608, 608 }
+
+/**
+ * Default Max Feed Rate (mm/s)
+ * Override with M203
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 75, 75 }
+
+/**
+ * Default Max Acceleration (change/s) change = mm/s
+ * (Maximum start speed for accelerated moves)
+ * Override with M201
+ * X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
+ */
+#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 , 10000 }
+
+/**
+ * Default Acceleration (change/s) change = mm/s
+ * Override with M204
+ *
+ * M204 P Acceleration
+ * M204 R Retract Acceleration
+ * M204 T Travel Acceleration
+ */
+#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
+/**
+ * Default Jerk (mm/s)
+ * Override with M205 X Y Z E
+ *
+ * "Jerk" specifies the minimum speed change that requires acceleration.
+ * When changing speed and direction, if the difference is less than the
+ * value set here, it may happen instantaneously.
+ */
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 20.0
+ #define DEFAULT_YJERK 15.0
+ #define DEFAULT_ZJERK 0.4
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
+
+/**
+ * S-Curve Acceleration
+ *
+ * This option eliminates vibration during printing by fitting a Bézier
+ * curve to move acceleration, producing much smoother direction changes.
+ *
+ * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
+ */
+//#define S_CURVE_ACCELERATION
+
+//===========================================================================
+//============================= Z Probe Options =============================
+//===========================================================================
+// @section probes
+
+//
+// See http://marlinfw.org/docs/configuration/probes.html
+//
+
+/**
+ * Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+ *
+ * Enable this option for a probe connected to the Z Min endstop pin.
+ */
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+
+/**
+ * Z_MIN_PROBE_ENDSTOP
+ *
+ * Enable this option for a probe connected to any pin except Z-Min.
+ * (By default Marlin assumes the Z-Max endstop pin.)
+ * To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
+ *
+ * - The simplest option is to use a free endstop connector.
+ * - Use 5V for powered (usually inductive) sensors.
+ *
+ * - RAMPS 1.3/1.4 boards may use the 5V, GND, and Aux4->D32 pin:
+ * - For simple switches connect...
+ * - normally-closed switches to GND and D32.
+ * - normally-open switches to 5V and D32.
+ *
+ * WARNING: Setting the wrong pin may have unexpected and potentially
+ * disastrous consequences. Use with caution and do your homework.
+ *
+ */
+//#define Z_MIN_PROBE_ENDSTOP
+
+/**
+ * Probe Type
+ *
+ * Allen Key Probes, Servo Probes, Z-Sled Probes, FIX_MOUNTED_PROBE, etc.
+ * Activate one of these to use Auto Bed Leveling below.
+ */
+
+/**
+ * The "Manual Probe" provides a means to do "Auto" Bed Leveling without a probe.
+ * Use G29 repeatedly, adjusting the Z height at each point with movement commands
+ * or (with LCD_BED_LEVELING) the LCD controller.
+ */
+//#define PROBE_MANUALLY
+//#define MANUAL_PROBE_START_Z 0.2
+
+/**
+ * A Fix-Mounted Probe either doesn't deploy or needs manual deployment.
+ * (e.g., an inductive probe or a nozzle-based probe-switch.)
+ */
+#define FIX_MOUNTED_PROBE
+
+/**
+ * Z Servo Probe, such as an endstop switch on a rotating arm.
+ */
+//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
+//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
+
+/**
+ * The BLTouch probe uses a Hall effect sensor and emulates a servo.
+ */
+//#define BLTOUCH
+#if ENABLED(BLTOUCH)
+ //#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
+#endif
+
+// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
+//#define SOLENOID_PROBE
+
+// A sled-mounted probe like those designed by Charles Bell.
+//#define Z_PROBE_SLED
+//#define SLED_DOCKING_OFFSET 5 // The extra distance the X axis must travel to pickup the sled. 0 should be fine but you can push it further if you'd like.
+
+// A probe deployed by moving the x-axis, such as the Wilson II's rack-and-pinion probe designed by Marty Rice.
+//#define RACK_AND_PINION_PROBE
+#if ENABLED(RACK_AND_PINION_PROBE)
+ #define Z_PROBE_DEPLOY_X X_MIN_POS
+ #define Z_PROBE_RETRACT_X X_MAX_POS
+#endif
+
+//
+// For Z_PROBE_ALLEN_KEY see the Delta example configurations.
+//
+
+/**
+ * Z Probe to nozzle (X,Y) offset, relative to (0, 0).
+ * X and Y offsets must be integers.
+ *
+ * In the following example the X and Y offsets are both positive:
+ * #define X_PROBE_OFFSET_FROM_EXTRUDER 10
+ * #define Y_PROBE_OFFSET_FROM_EXTRUDER 10
+ *
+ * +-- BACK ---+
+ * | |
+ * L | (+) P | R <-- probe (20,20)
+ * E | | I
+ * F | (-) N (+) | G <-- nozzle (10,10)
+ * T | | H
+ * | (-) | T
+ * | |
+ * O-- FRONT --+
+ * (0,0)
+ */
+#define X_PROBE_OFFSET_FROM_EXTRUDER 0 // X offset: -left +right [of the nozzle]
+#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
+#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
+
+// Certain types of probes need to stay away from edges
+#define MIN_PROBE_EDGE 10
+
+// X and Y axis travel speed (mm/m) between probes
+#define XY_PROBE_SPEED 8000
+
+// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
+#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
+
+// Feedrate (mm/m) for the "accurate" probe of each point
+#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST / 2)
+
+// The number of probes to perform at each point.
+// Set to 2 for a fast/slow probe, using the second probe result.
+// Set to 3 or more for slow probes, averaging the results.
+//#define MULTIPLE_PROBING 2
+
+/**
+ * Z probes require clearance when deploying, stowing, and moving between
+ * probe points to avoid hitting the bed and other hardware.
+ * Servo-mounted probes require extra space for the arm to rotate.
+ * Inductive probes need space to keep from triggering early.
+ *
+ * Use these settings to specify the distance (mm) to raise the probe (or
+ * lower the bed). The values set here apply over and above any (negative)
+ * probe Z Offset set with Z_PROBE_OFFSET_FROM_EXTRUDER, M851, or the LCD.
+ * Only integer values >= 1 are valid here.
+ *
+ * Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
+ * But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
+ */
+#define Z_CLEARANCE_DEPLOY_PROBE 0 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_BETWEEN_PROBES 3 // Z Clearance between probe points
+#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
+//#define Z_AFTER_PROBING 5 // Z position after probing is done
+
+#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
+
+// For M851 give a range for adjusting the Z probe offset
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
+
+// Enable the M48 repeatability test to test probe accuracy
+#define Z_MIN_PROBE_REPEATABILITY_TEST
+
+// Before deploy/stow pause for user confirmation
+//#define PAUSE_BEFORE_DEPLOY_STOW
+
+/**
+ * Enable one or more of the following if probing seems unreliable.
+ * Heaters and/or fans can be disabled during probing to minimize electrical
+ * noise. A delay can also be added to allow noise and vibration to settle.
+ * These options are most useful for the BLTouch probe, but may also improve
+ * readings with inductive probes and piezo sensors.
+ */
+//#define PROBING_HEATERS_OFF // Turn heaters off when probing
+#if ENABLED(PROBING_HEATERS_OFF)
+ //#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
+#endif
+//#define PROBING_FANS_OFF // Turn fans off when probing
+//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
+//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
+
+// For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
+// :{ 0:'Low', 1:'High' }
+#define X_ENABLE_ON 0
+#define Y_ENABLE_ON 0
+#define Z_ENABLE_ON 0
+#define E_ENABLE_ON 0 // For all extruders
+
+// Disables axis stepper immediately when it's not being used.
+// WARNING: When motors turn off there is a chance of losing position accuracy!
+#define DISABLE_X false
+#define DISABLE_Y false
+#define DISABLE_Z false
+
+// Warn on display about possibly reduced accuracy
+//#define DISABLE_REDUCED_ACCURACY_WARNING
+
+// @section extruder
+
+#define DISABLE_E false // For all extruders
+#define DISABLE_INACTIVE_EXTRUDER // Keep only the active extruder enabled
+
+// @section machine
+
+// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
+#define INVERT_X_DIR false
+#define INVERT_Y_DIR false
+#define INVERT_Z_DIR false
+
+// @section extruder
+
+// For direct drive extruder v9 set to true, for geared extruder set to false.
+#define INVERT_E0_DIR false
+#define INVERT_E1_DIR false
+#define INVERT_E2_DIR false
+#define INVERT_E3_DIR false
+#define INVERT_E4_DIR false
+#define INVERT_E5_DIR false
+
+// @section homing
+
+//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed
+
+//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
+
+//#define Z_HOMING_HEIGHT 4 // (mm) Minimal Z height before homing (G28) for Z clearance above the bed, clamps, ...
+ // Be sure you have this distance over your Z_MAX_POS in case.
+
+// Direction of endstops when homing; 1=MAX, -1=MIN
+// :[-1,1]
+#define X_HOME_DIR -1
+#define Y_HOME_DIR -1
+#define Z_HOME_DIR -1
+
+// @section machine
+
+// The size of the print bed
+#define X_BED_SIZE 230
+#define Y_BED_SIZE 230
+
+// Travel limits (mm) after homing, corresponding to endstop positions.
+#define X_MIN_POS 0
+#define Y_MIN_POS 0
+#define Z_MIN_POS 0
+#define X_MAX_POS X_BED_SIZE
+#define Y_MAX_POS Y_BED_SIZE
+#define Z_MAX_POS 230
+
+/**
+ * Software Endstops
+ *
+ * - Prevent moves outside the set machine bounds.
+ * - Individual axes can be disabled, if desired.
+ * - X and Y only apply to Cartesian robots.
+ * - Use 'M211' to set software endstops on/off or report current state
+ */
+
+// Min software endstops constrain movement within minimum coordinate bounds
+//#define MIN_SOFTWARE_ENDSTOPS
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS)
+ #define MIN_SOFTWARE_ENDSTOP_X
+ #define MIN_SOFTWARE_ENDSTOP_Y
+ #define MIN_SOFTWARE_ENDSTOP_Z
+#endif
+
+// Max software endstops constrain movement within maximum coordinate bounds
+//#define MAX_SOFTWARE_ENDSTOPS
+#if ENABLED(MAX_SOFTWARE_ENDSTOPS)
+ #define MAX_SOFTWARE_ENDSTOP_X
+ #define MAX_SOFTWARE_ENDSTOP_Y
+ #define MAX_SOFTWARE_ENDSTOP_Z
+#endif
+
+#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
+ //#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
+#endif
+
+/**
+ * Filament Runout Sensors
+ * Mechanical or opto endstops are used to check for the presence of filament.
+ *
+ * RAMPS-based boards use SERVO3_PIN for the first runout sensor.
+ * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
+ * By default the firmware assumes HIGH=FILAMENT PRESENT.
+ */
+//#define FILAMENT_RUNOUT_SENSOR
+#if ENABLED(FILAMENT_RUNOUT_SENSOR)
+ #define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+ #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
+ #define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
+ //#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
+ #define FILAMENT_RUNOUT_SCRIPT "M600"
+
+ // After a runout is detected, continue printing this length of filament
+ // before executing the runout script. Useful for a sensor at the end of
+ // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
+ //#define FILAMENT_RUNOUT_DISTANCE_MM 25
+
+ #ifdef FILAMENT_RUNOUT_DISTANCE_MM
+ // Enable this option to use an encoder disc that toggles the runout pin
+ // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
+ // large enough to avoid false positives.)
+ //#define FILAMENT_MOTION_SENSOR
+ #endif
+#endif
+
+//===========================================================================
+//=============================== Bed Leveling ==============================
+//===========================================================================
+// @section calibrate
+
+/**
+ * Choose one of the options below to enable G29 Bed Leveling. The parameters
+ * and behavior of G29 will change depending on your selection.
+ *
+ * If using a Probe for Z Homing, enable Z_SAFE_HOMING also!
+ *
+ * - AUTO_BED_LEVELING_3POINT
+ * Probe 3 arbitrary points on the bed (that aren't collinear)
+ * You specify the XY coordinates of all 3 points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_LINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a single tilted plane. Best for a flat bed.
+ *
+ * - AUTO_BED_LEVELING_BILINEAR
+ * Probe several points in a grid.
+ * You specify the rectangle and the density of sample points.
+ * The result is a mesh, best for large or uneven beds.
+ *
+ * - AUTO_BED_LEVELING_UBL (Unified Bed Leveling)
+ * A comprehensive bed leveling system combining the features and benefits
+ * of other systems. UBL also includes integrated Mesh Generation, Mesh
+ * Validation and Mesh Editing systems.
+ *
+ * - MESH_BED_LEVELING
+ * Probe a grid manually
+ * The result is a mesh, suitable for large or uneven beds. (See BILINEAR.)
+ * For machines without a probe, Mesh Bed Leveling provides a method to perform
+ * leveling in steps so you can manually adjust the Z height at each grid-point.
+ * With an LCD controller the process is guided step-by-step.
+ */
+//#define AUTO_BED_LEVELING_3POINT
+//#define AUTO_BED_LEVELING_LINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
+#define AUTO_BED_LEVELING_UBL
+//#define MESH_BED_LEVELING
+
+/**
+ * Normally G28 leaves leveling disabled on completion. Enable
+ * this option to have G28 restore the prior leveling state.
+ */
+#define RESTORE_LEVELING_AFTER_G28
+
+/**
+ * Enable detailed logging of G28, G29, M48, etc.
+ * Turn on with the command 'M111 S32'.
+ * NOTE: Requires a lot of PROGMEM!
+ */
+//#define DEBUG_LEVELING_FEATURE
+
+#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
+ // Gradually reduce leveling correction until a set height is reached,
+ // at which point movement will be level to the machine's XY plane.
+ // The height can be set with M420 Z
+ #define ENABLE_LEVELING_FADE_HEIGHT
+
+ // For Cartesian machines, instead of dividing moves on mesh boundaries,
+ // split up moves into short segments like a Delta. This follows the
+ // contours of the bed more closely than edge-to-edge straight moves.
+ #define SEGMENT_LEVELED_MOVES
+ #define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
+
+ /**
+ * Enable the G26 Mesh Validation Pattern tool.
+ */
+ #define G26_MESH_VALIDATION
+ #if ENABLED(G26_MESH_VALIDATION)
+ #define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
+ #define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
+ #define MESH_TEST_HOTEND_TEMP 200.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
+ #define MESH_TEST_BED_TEMP 100.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
+ #endif
+
+#endif
+
+#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Set the number of grid points per dimension.
+ #define GRID_MAX_POINTS_X 3
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ // Set the boundaries for probing (where the probe can reach).
+ #define LEFT_PROBE_BED_POSITION 15
+ #define RIGHT_PROBE_BED_POSITION 200
+ #define FRONT_PROBE_BED_POSITION 15
+ #define BACK_PROBE_BED_POSITION 200
+
+ // Probe along the Y axis, advancing X after each column
+ //#define PROBE_Y_FIRST
+
+ #if ENABLED(AUTO_BED_LEVELING_BILINEAR)
+
+ // Beyond the probed grid, continue the implied tilt?
+ // Default is to maintain the height of the nearest edge.
+ //#define EXTRAPOLATE_BEYOND_GRID
+
+ //
+ // Experimental Subdivision of the grid by Catmull-Rom method.
+ // Synthesizes intermediate points to produce a more detailed mesh.
+ //
+ //#define ABL_BILINEAR_SUBDIVISION
+ #if ENABLED(ABL_BILINEAR_SUBDIVISION)
+ // Number of subdivisions between probe points
+ #define BILINEAR_SUBDIVISIONS 3
+ #endif
+
+ #endif
+
+#elif ENABLED(AUTO_BED_LEVELING_UBL)
+
+ //===========================================================================
+ //========================= Unified Bed Leveling ============================
+ //===========================================================================
+
+ //#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
+
+ #define MESH_INSET 15 // Set Mesh bounds as an inset region of the bed
+ #define GRID_MAX_POINTS_X 12 // Don't use more than 15 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ #define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
+ #define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
+
+ //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+ // as the Z-Height correction value.
+
+#elif ENABLED(MESH_BED_LEVELING)
+
+ //===========================================================================
+ //=================================== Mesh ==================================
+ //===========================================================================
+
+ #define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
+ #define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
+ #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
+
+ //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
+
+#endif // BED_LEVELING
+
+/**
+ * Points to probe for all 3-point Leveling procedures.
+ * Override if the automatically selected points are inadequate.
+ */
+#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
+ //#define PROBE_PT_1_X 15
+ //#define PROBE_PT_1_Y 180
+ //#define PROBE_PT_2_X 15
+ //#define PROBE_PT_2_Y 20
+ //#define PROBE_PT_3_X 170
+ //#define PROBE_PT_3_Y 20
+#endif
+
+/**
+ * Add a bed leveling sub-menu for ABL or MBL.
+ * Include a guided procedure if manual probing is enabled.
+ */
+//#define LCD_BED_LEVELING
+
+#if ENABLED(LCD_BED_LEVELING)
+ #define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
+ #define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
+ //#define MESH_EDIT_MENU // Add a menu to edit mesh points
+#endif
+
+// Add a menu item to move between bed corners for manual bed adjustment
+#define LEVEL_BED_CORNERS
+
+#if ENABLED(LEVEL_BED_CORNERS)
+ #define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
+ //#define LEVEL_CENTER_TOO // Move to the center after the last corner
+#endif
+
+/**
+ * Commands to execute at the end of G29 probing.
+ * Useful to retract or move the Z probe out of the way.
+ */
+//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+
+
+// @section homing
+
+// The center of the bed is at (X=0, Y=0)
+//#define BED_CENTER_AT_0_0
+
+// Manually set the home position. Leave these undefined for automatic settings.
+// For DELTA this is the top-center of the Cartesian print volume.
+//#define MANUAL_X_HOME_POS 0
+//#define MANUAL_Y_HOME_POS 0
+//#define MANUAL_Z_HOME_POS 0
+
+// Use "Z Safe Homing" to avoid homing with a Z probe outside the bed area.
+//
+// With this feature enabled:
+//
+// - Allow Z homing only after X and Y homing AND stepper drivers still enabled.
+// - If stepper drivers time out, it will need X and Y homing again before Z homing.
+// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
+// - Prevent Z homing when the Z probe is outside bed area.
+//
+#define Z_SAFE_HOMING
+
+#if ENABLED(Z_SAFE_HOMING)
+ #define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
+ #define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
+#endif
+
+// Homing speeds (mm/m)
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z (4*60)
+
+// Validate that endstops are triggered on homing moves
+#define VALIDATE_HOMING_ENDSTOPS
+
+// @section calibrate
+
+/**
+ * Bed Skew Compensation
+ *
+ * This feature corrects for misalignment in the XYZ axes.
+ *
+ * Take the following steps to get the bed skew in the XY plane:
+ * 1. Print a test square (e.g., https://www.thingiverse.com/thing:2563185)
+ * 2. For XY_DIAG_AC measure the diagonal A to C
+ * 3. For XY_DIAG_BD measure the diagonal B to D
+ * 4. For XY_SIDE_AD measure the edge A to D
+ *
+ * Marlin automatically computes skew factors from these measurements.
+ * Skew factors may also be computed and set manually:
+ *
+ * - Compute AB : SQRT(2*AC*AC+2*BD*BD-4*AD*AD)/2
+ * - XY_SKEW_FACTOR : TAN(PI/2-ACOS((AC*AC-AB*AB-AD*AD)/(2*AB*AD)))
+ *
+ * If desired, follow the same procedure for XZ and YZ.
+ * Use these diagrams for reference:
+ *
+ * Y Z Z
+ * ^ B-------C ^ B-------C ^ B-------C
+ * | / / | / / | / /
+ * | / / | / / | / /
+ * | A-------D | A-------D | A-------D
+ * +-------------->X +-------------->X +-------------->Y
+ * XY_SKEW_FACTOR XZ_SKEW_FACTOR YZ_SKEW_FACTOR
+ */
+//#define SKEW_CORRECTION
+
+#if ENABLED(SKEW_CORRECTION)
+ // Input all length measurements here:
+ #define XY_DIAG_AC 282.8427124746
+ #define XY_DIAG_BD 282.8427124746
+ #define XY_SIDE_AD 200
+
+ // Or, set the default skew factors directly here
+ // to override the above measurements:
+ #define XY_SKEW_FACTOR 0.0
+
+ //#define SKEW_CORRECTION_FOR_Z
+ #if ENABLED(SKEW_CORRECTION_FOR_Z)
+ #define XZ_DIAG_AC 282.8427124746
+ #define XZ_DIAG_BD 282.8427124746
+ #define YZ_DIAG_AC 282.8427124746
+ #define YZ_DIAG_BD 282.8427124746
+ #define YZ_SIDE_AD 200
+ #define XZ_SKEW_FACTOR 0.0
+ #define YZ_SKEW_FACTOR 0.0
+ #endif
+
+ // Enable this option for M852 to set skew at runtime
+ //#define SKEW_CORRECTION_GCODE
+#endif
+
+//=============================================================================
+//============================= Additional Features ===========================
+//=============================================================================
+
+// @section extras
+
+//
+// EEPROM
+//
+// The microcontroller can store settings in the EEPROM, e.g. max velocity...
+// M500 - stores parameters in EEPROM
+// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
+// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
+//
+#define EEPROM_SETTINGS // Enable for M500 and M501 commands
+//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
+#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
+
+//
+// Host Keepalive
+//
+// When enabled Marlin will send a busy status message to the host
+// every couple of seconds when it can't accept commands.
+//
+#define HOST_KEEPALIVE_FEATURE // Disable this if your host doesn't like keepalive messages
+#define DEFAULT_KEEPALIVE_INTERVAL 2 // Number of seconds between "busy" messages. Set with M113.
+#define BUSY_WHILE_HEATING // Some hosts require "busy" messages even during heating
+
+//
+// M100 Free Memory Watcher
+//
+//#define M100_FREE_MEMORY_WATCHER // Add M100 (Free Memory Watcher) to debug memory usage
+
+//
+// G20/G21 Inch mode support
+//
+//#define INCH_MODE_SUPPORT
+
+//
+// M149 Set temperature units support
+//
+//#define TEMPERATURE_UNITS_SUPPORT
+
+// @section temperature
+
+// Preheat Constants
+#define PREHEAT_1_LABEL "PLA"
+#define PREHEAT_1_TEMP_HOTEND 180
+#define PREHEAT_1_TEMP_BED 70
+#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
+
+#define PREHEAT_2_LABEL "ABS"
+#define PREHEAT_2_TEMP_HOTEND 240
+#define PREHEAT_2_TEMP_BED 110
+#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
+
+/**
+ * Nozzle Park
+ *
+ * Park the nozzle at the given XYZ position on idle or G27.
+ *
+ * The "P" parameter controls the action applied to the Z axis:
+ *
+ * P0 (Default) If Z is below park Z raise the nozzle.
+ * P1 Raise the nozzle always to Z-park height.
+ * P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
+ */
+//#define NOZZLE_PARK_FEATURE
+
+#if ENABLED(NOZZLE_PARK_FEATURE)
+ // Specify a park position as { X, Y, Z }
+ #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
+ #define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+ #define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
+#endif
+
+/**
+ * Clean Nozzle Feature -- EXPERIMENTAL
+ *
+ * Adds the G12 command to perform a nozzle cleaning process.
+ *
+ * Parameters:
+ * P Pattern
+ * S Strokes / Repetitions
+ * T Triangles (P1 only)
+ *
+ * Patterns:
+ * P0 Straight line (default). This process requires a sponge type material
+ * at a fixed bed location. "S" specifies strokes (i.e. back-forth motions)
+ * between the start / end points.
+ *
+ * P1 Zig-zag pattern between (X0, Y0) and (X1, Y1), "T" specifies the
+ * number of zig-zag triangles to do. "S" defines the number of strokes.
+ * Zig-zags are done in whichever is the narrower dimension.
+ * For example, "G12 P1 S1 T3" will execute:
+ *
+ * --
+ * | (X0, Y1) | /\ /\ /\ | (X1, Y1)
+ * | | / \ / \ / \ |
+ * A | | / \ / \ / \ |
+ * | | / \ / \ / \ |
+ * | (X0, Y0) | / \/ \/ \ | (X1, Y0)
+ * -- +--------------------------------+
+ * |________|_________|_________|
+ * T1 T2 T3
+ *
+ * P2 Circular pattern with middle at NOZZLE_CLEAN_CIRCLE_MIDDLE.
+ * "R" specifies the radius. "S" specifies the stroke count.
+ * Before starting, the nozzle moves to NOZZLE_CLEAN_START_POINT.
+ *
+ * Caveats: The ending Z should be the same as starting Z.
+ * Attention: EXPERIMENTAL. G-code arguments may change.
+ *
+ */
+//#define NOZZLE_CLEAN_FEATURE
+
+#if ENABLED(NOZZLE_CLEAN_FEATURE)
+ // Default number of pattern repetitions
+ #define NOZZLE_CLEAN_STROKES 12
+
+ // Default number of triangles
+ #define NOZZLE_CLEAN_TRIANGLES 3
+
+ // Specify positions as { X, Y, Z }
+ #define NOZZLE_CLEAN_START_POINT { 30, 30, (Z_MIN_POS + 1)}
+ #define NOZZLE_CLEAN_END_POINT {100, 60, (Z_MIN_POS + 1)}
+
+ // Circular pattern radius
+ #define NOZZLE_CLEAN_CIRCLE_RADIUS 6.5
+ // Circular pattern circle fragments number
+ #define NOZZLE_CLEAN_CIRCLE_FN 10
+ // Middle point of circle
+ #define NOZZLE_CLEAN_CIRCLE_MIDDLE NOZZLE_CLEAN_START_POINT
+
+ // Moves the nozzle to the initial position
+ #define NOZZLE_CLEAN_GOBACK
+#endif
+
+/**
+ * Print Job Timer
+ *
+ * Automatically start and stop the print job timer on M104/M109/M190.
+ *
+ * M104 (hotend, no wait) - high temp = none, low temp = stop timer
+ * M109 (hotend, wait) - high temp = start timer, low temp = stop timer
+ * M190 (bed, wait) - high temp = start timer, low temp = none
+ *
+ * The timer can also be controlled with the following commands:
+ *
+ * M75 - Start the print job timer
+ * M76 - Pause the print job timer
+ * M77 - Stop the print job timer
+ */
+#define PRINTJOB_TIMER_AUTOSTART
+
+/**
+ * Print Counter
+ *
+ * Track statistical data such as:
+ *
+ * - Total print jobs
+ * - Total successful print jobs
+ * - Total failed print jobs
+ * - Total time printing
+ *
+ * View the current statistics with M78.
+ */
+//#define PRINTCOUNTER
+
+//=============================================================================
+//============================= LCD and SD support ============================
+//=============================================================================
+
+// @section lcd
+
+/**
+ * LCD LANGUAGE
+ *
+ * Select the language to display on the LCD. These languages are available:
+ *
+ * en, an, bg, ca, cz, da, de, el, el-gr, es, eu, fi, fr, gl, hr, it,
+ * jp-kana, ko_KR, nl, pl, pt, pt-br, ru, sk, tr, uk, zh_CN, zh_TW, test
+ *
+ * :{ 'en':'English', 'an':'Aragonese', 'bg':'Bulgarian', 'ca':'Catalan', 'cz':'Czech', 'da':'Danish', 'de':'German', 'el':'Greek', 'el-gr':'Greek (Greece)', 'es':'Spanish', 'eu':'Basque-Euskera', 'fi':'Finnish', 'fr':'French', 'gl':'Galician', 'hr':'Croatian', 'it':'Italian', 'jp-kana':'Japanese', 'ko_KR':'Korean (South Korea)', 'nl':'Dutch', 'pl':'Polish', 'pt':'Portuguese', 'pt-br':'Portuguese (Brazilian)', 'ru':'Russian', 'sk':'Slovak', 'tr':'Turkish', 'uk':'Ukrainian', 'zh_CN':'Chinese (Simplified)', 'zh_TW':'Chinese (Traditional)', 'test':'TEST' }
+ */
+#define LCD_LANGUAGE en
+
+/**
+ * LCD Character Set
+ *
+ * Note: This option is NOT applicable to Graphical Displays.
+ *
+ * All character-based LCDs provide ASCII plus one of these
+ * language extensions:
+ *
+ * - JAPANESE ... the most common
+ * - WESTERN ... with more accented characters
+ * - CYRILLIC ... for the Russian language
+ *
+ * To determine the language extension installed on your controller:
+ *
+ * - Compile and upload with LCD_LANGUAGE set to 'test'
+ * - Click the controller to view the LCD menu
+ * - The LCD will display Japanese, Western, or Cyrillic text
+ *
+ * See http://marlinfw.org/docs/development/lcd_language.html
+ *
+ * :['JAPANESE', 'WESTERN', 'CYRILLIC']
+ */
+#define DISPLAY_CHARSET_HD44780 JAPANESE
+
+/**
+ * Info Screen Style (0:Classic, 1:Prusa)
+ *
+ * :[0:'Classic', 1:'Prusa']
+ */
+#define LCD_INFO_SCREEN_STYLE 0
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ *
+ */
+#define SDSUPPORT
+
+/**
+ * SD CARD: SPI SPEED
+ *
+ * Enable one of the following items for a slower SPI transfer speed.
+ * This may be required to resolve "volume init" errors.
+ */
+//#define SPI_SPEED SPI_HALF_SPEED
+//#define SPI_SPEED SPI_QUARTER_SPEED
+//#define SPI_SPEED SPI_EIGHTH_SPEED
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#define SD_CHECK_AND_RETRY
+
+/**
+ * LCD Menu Items
+ *
+ * Disable all menus and only display the Status Screen, or
+ * just remove some extraneous menu items to recover space.
+ */
+//#define NO_LCD_MENUS
+//#define SLIM_LCD_MENUS
+
+//
+// ENCODER SETTINGS
+//
+// This option overrides the default number of encoder pulses needed to
+// produce one step. Should be increased for high-resolution encoders.
+//
+#define ENCODER_PULSES_PER_STEP 2
+
+//
+// Use this option to override the number of step signals required to
+// move between next/prev menu items.
+//
+#define ENCODER_STEPS_PER_MENU_ITEM 1
+
+/**
+ * Encoder Direction Options
+ *
+ * Test your encoder's behavior first with both options disabled.
+ *
+ * Reversed Value Edit and Menu Nav? Enable REVERSE_ENCODER_DIRECTION.
+ * Reversed Menu Navigation only? Enable REVERSE_MENU_DIRECTION.
+ * Reversed Value Editing only? Enable BOTH options.
+ */
+
+//
+// This option reverses the encoder direction everywhere.
+//
+// Set this option if CLOCKWISE causes values to DECREASE
+//
+//#define REVERSE_ENCODER_DIRECTION
+
+//
+// This option reverses the encoder direction for navigating LCD menus.
+//
+// If CLOCKWISE normally moves DOWN this makes it go UP.
+// If CLOCKWISE normally moves UP this makes it go DOWN.
+//
+//#define REVERSE_MENU_DIRECTION
+
+//
+// Individual Axis Homing
+//
+// Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
+//
+//#define INDIVIDUAL_AXIS_HOMING_MENU
+
+//
+// SPEAKER/BUZZER
+//
+// If you have a speaker that can produce tones, enable it here.
+// By default Marlin assumes you have a buzzer with a fixed frequency.
+//
+//#define SPEAKER
+
+//
+// The duration and frequency for the UI feedback sound.
+// Set these to 0 to disable audio feedback in the LCD menus.
+//
+// Note: Test audio output with the G-Code:
+// M300 S P
+//
+//#define LCD_FEEDBACK_FREQUENCY_DURATION_MS 2
+//#define LCD_FEEDBACK_FREQUENCY_HZ 5000
+
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//======================== (Character-based LCDs) =========================
+//=============================================================================
+
+//
+// RepRapDiscount Smart Controller.
+// http://reprap.org/wiki/RepRapDiscount_Smart_Controller
+//
+// Note: Usually sold with a white PCB.
+//
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
+
+//
+// Original RADDS LCD Display+Encoder+SDCardReader
+// http://doku.radds.org/dokumentation/lcd-display/
+//
+//#define RADDS_DISPLAY
+
+//
+// ULTIMAKER Controller.
+//
+//#define ULTIMAKERCONTROLLER
+
+//
+// ULTIPANEL as seen on Thingiverse.
+//
+//#define ULTIPANEL
+
+//
+// PanelOne from T3P3 (via RAMPS 1.4 AUX2/AUX3)
+// http://reprap.org/wiki/PanelOne
+//
+//#define PANEL_ONE
+
+//
+// GADGETS3D G3D LCD/SD Controller
+// http://reprap.org/wiki/RAMPS_1.3/1.4_GADGETS3D_Shield_with_Panel
+//
+// Note: Usually sold with a blue PCB.
+//
+//#define G3D_PANEL
+
+//
+// RigidBot Panel V1.0
+// http://www.inventapart.com/
+//
+//#define RIGIDBOT_PANEL
+
+//
+// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
+// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
+//
+//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
+
+//
+// ANET and Tronxy 20x4 Controller
+//
+//#define ZONESTAR_LCD // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+ // This LCD is known to be susceptible to electrical interference
+ // which scrambles the display. Pressing any button clears it up.
+ // This is a LCD2004 display with 5 analog buttons.
+
+//
+// Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
+//
+//#define ULTRA_LCD
+
+//=============================================================================
+//======================== LCD / Controller Selection =========================
+//===================== (I2C and Shift-Register LCDs) =====================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: I2C
+//
+// Note: These controllers require the installation of Arduino's LiquidCrystal_I2C
+// library. For more info: https://github.com/kiyoshigawa/LiquidCrystal_I2C
+//
+
+//
+// Elefu RA Board Control Panel
+// http://www.elefu.com/index.php?route=product/product&product_id=53
+//
+//#define RA_CONTROL_PANEL
+
+//
+// Sainsmart (YwRobot) LCD Displays
+//
+// These require F.Malpartida's LiquidCrystal_I2C library
+// https://bitbucket.org/fmalpartida/new-liquidcrystal/wiki/Home
+//
+//#define LCD_SAINSMART_I2C_1602
+//#define LCD_SAINSMART_I2C_2004
+
+//
+// Generic LCM1602 LCD adapter
+//
+//#define LCM1602
+
+//
+// PANELOLU2 LCD with status LEDs,
+// separate encoder and click inputs.
+//
+// Note: This controller requires Arduino's LiquidTWI2 library v1.2.3 or later.
+// For more info: https://github.com/lincomatic/LiquidTWI2
+//
+// Note: The PANELOLU2 encoder click input can either be directly connected to
+// a pin (if BTN_ENC defined to != -1) or read through I2C (when BTN_ENC == -1).
+//
+//#define LCD_I2C_PANELOLU2
+
+//
+// Panucatt VIKI LCD with status LEDs,
+// integrated click & L/R/U/D buttons, separate encoder inputs.
+//
+//#define LCD_I2C_VIKI
+
+//
+// CONTROLLER TYPE: Shift register panels
+//
+
+//
+// 2 wire Non-latching LCD SR from https://goo.gl/aJJ4sH
+// LCD configuration: http://reprap.org/wiki/SAV_3D_LCD
+//
+//#define SAV_3DLCD
+
+//=============================================================================
+//======================= LCD / Controller Selection =======================
+//========================= (Graphical LCDs) ========================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Graphical 128x64 (DOGM)
+//
+// IMPORTANT: The U8glib library is required for Graphical Display!
+// https://github.com/olikraus/U8glib_Arduino
+//
+
+//
+// RepRapDiscount FULL GRAPHIC Smart Controller
+// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
+//
+#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+
+//
+// ReprapWorld Graphical LCD
+// https://reprapworld.com/?products_details&products_id/1218
+//
+//#define REPRAPWORLD_GRAPHICAL_LCD
+
+//
+// Activate one of these if you have a Panucatt Devices
+// Viki 2.0 or mini Viki with Graphic LCD
+// http://panucatt.com
+//
+//#define VIKI2
+//#define miniVIKI
+
+//
+// MakerLab Mini Panel with graphic
+// controller and SD support - http://reprap.org/wiki/Mini_panel
+//
+//#define MINIPANEL
+
+//
+// MaKr3d Makr-Panel with graphic controller and SD support.
+// http://reprap.org/wiki/MaKr3d_MaKrPanel
+//
+//#define MAKRPANEL
+
+//
+// Adafruit ST7565 Full Graphic Controller.
+// https://github.com/eboston/Adafruit-ST7565-Full-Graphic-Controller/
+//
+//#define ELB_FULL_GRAPHIC_CONTROLLER
+
+//
+// BQ LCD Smart Controller shipped by
+// default with the BQ Hephestos 2 and Witbox 2.
+//
+//#define BQ_LCD_SMART_CONTROLLER
+
+//
+// Cartesio UI
+// http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+//
+//#define CARTESIO_UI
+
+//
+// LCD for Melzi Card with Graphical LCD
+//
+//#define LCD_FOR_MELZI
+
+//
+// SSD1306 OLED full graphics generic display
+//
+//#define U8GLIB_SSD1306
+
+//
+// SAV OLEd LCD module support using either SSD1306 or SH1106 based LCD modules
+//
+//#define SAV_3DGLCD
+#if ENABLED(SAV_3DGLCD)
+ //#define U8GLIB_SSD1306
+ #define U8GLIB_SH1106
+#endif
+
+//
+// Original Ulticontroller from Ultimaker 2 printer with SSD1309 I2C display and encoder
+// https://github.com/Ultimaker/Ultimaker2/tree/master/1249_Ulticontroller_Board_(x1)
+//
+//#define ULTI_CONTROLLER
+
+//
+// TinyBoy2 128x64 OLED / Encoder Panel
+//
+//#define OLED_PANEL_TINYBOY2
+
+//
+// MKS MINI12864 with graphic controller and SD support
+// http://reprap.org/wiki/MKS_MINI_12864
+//
+//#define MKS_MINI_12864
+
+//
+// Factory display for Creality CR-10
+// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
+//
+// This is RAMPS-compatible using a single 10-pin connector.
+// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
+//
+//#define CR10_STOCKDISPLAY
+
+//
+// ANET and Tronxy Graphical Controller
+//
+// Anet 128x64 full graphics lcd with rotary encoder as used on Anet A6
+// A clone of the RepRapDiscount full graphics display but with
+// different pins/wiring (see pins_ANET_10.h).
+//
+//#define ANET_FULL_GRAPHICS_LCD
+
+//
+// MKS OLED 1.3" 128 × 64 FULL GRAPHICS CONTROLLER
+// http://reprap.org/wiki/MKS_12864OLED
+//
+// Tiny, but very sharp OLED display
+//
+//#define MKS_12864OLED // Uses the SH1106 controller (default)
+//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
+
+//
+// AZSMZ 12864 LCD with SD
+// https://www.aliexpress.com/store/product/3D-printer-smart-controller-SMART-RAMPS-OR-RAMPS-1-4-LCD-12864-LCD-control-panel-green/2179173_32213636460.html
+//
+//#define AZSMZ_12864
+
+//
+// Silvergate GLCD controller
+// http://github.com/android444/Silvergate
+//
+//#define SILVER_GATE_GLCD_CONTROLLER
+
+//
+// Extensible UI
+//
+// Enable third-party or vendor customized user interfaces that aren't
+// packaged with Marlin. Source code for the user interface will need to
+// be placed in "src/lcd/extensible_ui/lib"
+//
+//#define EXTENSIBLE_UI
+
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
+//=============================================================================
+//============================ Other Controllers ============================
+//=============================================================================
+
+//
+// CONTROLLER TYPE: Standalone / Serial
+//
+
+//
+// LCD for Malyan M200 printers.
+//
+//#define MALYAN_LCD
+
+//
+// CONTROLLER TYPE: Keypad / Add-on
+//
+
+//
+// RepRapWorld REPRAPWORLD_KEYPAD v1.1
+// http://reprapworld.com/?products_details&products_id=202&cPath=1591_1626
+//
+// REPRAPWORLD_KEYPAD_MOVE_STEP sets how much should the robot move when a key
+// is pressed, a value of 10.0 means 10mm per click.
+//
+//#define REPRAPWORLD_KEYPAD
+//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0
+
+//=============================================================================
+//=============================== Extra Features ==============================
+//=============================================================================
+
+// @section extras
+
+// Increase the FAN PWM frequency. Removes the PWM noise but increases heating in the FET/Arduino
+//#define FAST_PWM_FAN
+
+// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
+// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+// is too low, you should also increment SOFT_PWM_SCALE.
+//#define FAN_SOFT_PWM
+
+// Incrementing this by 1 will double the software PWM frequency,
+// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
+// However, control resolution will be halved for each increment;
+// at zero value, there are 128 effective control positions.
+#define SOFT_PWM_SCALE 0
+
+// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
+// be used to mitigate the associated resolution loss. If enabled,
+// some of the PWM cycles are stretched so on average the desired
+// duty cycle is attained.
+//#define SOFT_PWM_DITHER
+
+// Temperature status LEDs that display the hotend and bed temperature.
+// If all hotends, bed temperature, and target temperature are under 54C
+// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+//#define TEMP_STAT_LEDS
+
+// M240 Triggers a camera by emulating a Canon RC-1 Remote
+// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
+//#define PHOTOGRAPH_PIN 23
+
+// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
+//#define SF_ARC_FIX
+
+// Support for the BariCUDA Paste Extruder
+//#define BARICUDA
+
+// Support for BlinkM/CyzRgb
+//#define BLINKM
+
+// Support for PCA9632 PWM LED driver
+//#define PCA9632
+
+/**
+ * RGB LED / LED Strip Control
+ *
+ * Enable support for an RGB LED connected to 5V digital pins, or
+ * an RGB Strip connected to MOSFETs controlled by digital pins.
+ *
+ * Adds the M150 command to set the LED (or LED strip) color.
+ * If pins are PWM capable (e.g., 4, 5, 6, 11) then a range of
+ * luminance values can be set from 0 to 255.
+ * For Neopixel LED an overall brightness parameter is also available.
+ *
+ * *** CAUTION ***
+ * LED Strips require a MOSFET Chip between PWM lines and LEDs,
+ * as the Arduino cannot handle the current the LEDs will require.
+ * Failure to follow this precaution can destroy your Arduino!
+ * NOTE: A separate 5V power supply is required! The Neopixel LED needs
+ * more current than the Arduino 5V linear regulator can produce.
+ * *** CAUTION ***
+ *
+ * LED Type. Enable only one of the following two options.
+ *
+ */
+//#define RGB_LED
+//#define RGBW_LED
+
+#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
+ #define RGB_LED_R_PIN 34
+ #define RGB_LED_G_PIN 43
+ #define RGB_LED_B_PIN 35
+ #define RGB_LED_W_PIN -1
+#endif
+
+// Support for Adafruit Neopixel LED driver
+//#define NEOPIXEL_LED
+#if ENABLED(NEOPIXEL_LED)
+ #define NEOPIXEL_TYPE NEO_GRBW // NEO_GRBW / NEO_GRB - four/three channel driver type (defined in Adafruit_NeoPixel.h)
+ #define NEOPIXEL_PIN 4 // LED driving pin on motherboard 4 => D4 (EXP2-5 on Printrboard) / 30 => PC7 (EXP3-13 on Rumba)
+ #define NEOPIXEL_PIXELS 30 // Number of LEDs in the strip
+ #define NEOPIXEL_IS_SEQUENTIAL // Sequential display for temperature change - LED by LED. Disable to change all LEDs at once.
+ #define NEOPIXEL_BRIGHTNESS 127 // Initial brightness (0-255)
+ //#define NEOPIXEL_STARTUP_TEST // Cycle through colors at startup
+#endif
+
+/**
+ * Printer Event LEDs
+ *
+ * During printing, the LEDs will reflect the printer status:
+ *
+ * - Gradually change from blue to violet as the heated bed gets to target temp
+ * - Gradually change from violet to red as the hotend gets to temperature
+ * - Change to white to illuminate work surface
+ * - Change to green once print has finished
+ * - Turn off after the print has finished and the user has pushed a button
+ */
+#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(NEOPIXEL_LED)
+ #define PRINTER_EVENT_LEDS
+#endif
+
+/**
+ * R/C SERVO support
+ * Sponsored by TrinityLabs, Reworked by codexmas
+ */
+
+/**
+ * Number of servos
+ *
+ * For some servo-related options NUM_SERVOS will be set automatically.
+ * Set this manually if there are extra servos needing manual control.
+ * Leave undefined or set to 0 to entirely disable the servo subsystem.
+ */
+//#define NUM_SERVOS 3 // Servo index starts with 0 for M280 command
+
+// Delay (in milliseconds) before the next move will start, to give the servo time to reach its target angle.
+// 300ms is a good value but you can try less delay.
+// If the servo can't reach the requested position, increase it.
+#define SERVO_DELAY { 300 }
+
+// Only power servos during movement, otherwise leave off to prevent jitter
+//#define DEACTIVATE_SERVOS_AFTER_MOVE
+
+// Allow servo angle to be edited and saved to EEPROM
+//#define EDITABLE_SERVO_ANGLES
diff --git a/Marlin/src/config/examples/VORONDesign/Configuration_adv.h b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h
new file mode 100644
index 0000000000..4c05936b61
--- /dev/null
+++ b/Marlin/src/config/examples/VORONDesign/Configuration_adv.h
@@ -0,0 +1,1963 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+/**
+ * Configuration_adv.h
+ *
+ * Advanced settings.
+ * Only change these if you know exactly what you're doing.
+ * Some of these settings can damage your printer if improperly set!
+ *
+ * Basic settings can be found in Configuration.h
+ *
+ */
+#define CONFIGURATION_ADV_H_VERSION 020000
+
+// @section temperature
+
+//===========================================================================
+//=============================Thermal Settings ============================
+//===========================================================================
+
+//
+// Hephestos 2 24V heated bed upgrade kit.
+// https://store.bq.com/en/heated-bed-kit-hephestos2
+//
+//#define HEPHESTOS2_HEATED_BED_KIT
+#if ENABLED(HEPHESTOS2_HEATED_BED_KIT)
+ #undef TEMP_SENSOR_BED
+ #define TEMP_SENSOR_BED 70
+ #define HEATER_BED_INVERTING true
+#endif
+
+#if DISABLED(PIDTEMPBED)
+ #define BED_CHECK_INTERVAL 5000 // ms between checks in bang-bang control
+ #if ENABLED(BED_LIMIT_SWITCHING)
+ #define BED_HYSTERESIS 2 // Only disable heating if T>target+BED_HYSTERESIS and enable heating if T>target-BED_HYSTERESIS
+ #endif
+#endif
+
+/**
+ * Thermal Protection provides additional protection to your printer from damage
+ * and fire. Marlin always includes safe min and max temperature ranges which
+ * protect against a broken or disconnected thermistor wire.
+ *
+ * The issue: If a thermistor falls out, it will report the much lower
+ * temperature of the air in the room, and the the firmware will keep
+ * the heater on.
+ *
+ * The solution: Once the temperature reaches the target, start observing.
+ * If the temperature stays too far below the target (hysteresis) for too
+ * long (period), the firmware will halt the machine as a safety precaution.
+ *
+ * If you get false positives for "Thermal Runaway", increase
+ * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
+ */
+#if ENABLED(THERMAL_PROTECTION_HOTENDS)
+ #define THERMAL_PROTECTION_PERIOD 40 // Seconds
+ #define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
+
+ /**
+ * Whenever an M104, M109, or M303 increases the target temperature, the
+ * firmware will wait for the WATCH_TEMP_PERIOD to expire. If the temperature
+ * hasn't increased by WATCH_TEMP_INCREASE degrees, the machine is halted and
+ * requires a hard reset. This test restarts with any M104/M109/M303, but only
+ * if the current temperature is far enough below the target for a reliable
+ * test.
+ *
+ * If you get false positives for "Heating failed", increase WATCH_TEMP_PERIOD
+ * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
+ * below 2.
+ */
+ #define WATCH_TEMP_PERIOD 20 // Seconds
+ #define WATCH_TEMP_INCREASE 2 // Degrees Celsius
+#endif
+
+/**
+ * Thermal Protection parameters for the bed are just as above for hotends.
+ */
+#if ENABLED(THERMAL_PROTECTION_BED)
+ #define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
+ #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
+
+ /**
+ * As described above, except for the bed (M140/M190/M303).
+ */
+ #define WATCH_BED_TEMP_PERIOD 60 // Seconds
+ #define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
+#endif
+
+#if ENABLED(PIDTEMP)
+ // this adds an experimental additional term to the heating power, proportional to the extrusion speed.
+ // if Kc is chosen well, the additional required power due to increased melting should be compensated.
+ //#define PID_EXTRUSION_SCALING
+ #if ENABLED(PID_EXTRUSION_SCALING)
+ #define DEFAULT_Kc (100) //heating power=Kc*(e_speed)
+ #define LPQ_MAX_LEN 50
+ #endif
+#endif
+
+/**
+ * Automatic Temperature:
+ * The hotend target temperature is calculated by all the buffered lines of gcode.
+ * The maximum buffered steps/sec of the extruder motor is called "se".
+ * Start autotemp mode with M109 S B F
+ * The target temperature is set to mintemp+factor*se[steps/sec] and is limited by
+ * mintemp and maxtemp. Turn this off by executing M109 without F*
+ * Also, if the temperature is set to a value below mintemp, it will not be changed by autotemp.
+ * On an Ultimaker, some initial testing worked with M109 S215 B260 F1 in the start.gcode
+ */
+#define AUTOTEMP
+#if ENABLED(AUTOTEMP)
+ #define AUTOTEMP_OLDWEIGHT 0.98
+#endif
+
+// Show extra position information in M114
+//#define M114_DETAIL
+
+// Show Temperature ADC value
+// Enable for M105 to include ADC values read from temperature sensors.
+//#define SHOW_TEMP_ADC_VALUES
+
+/**
+ * High Temperature Thermistor Support
+ *
+ * Thermistors able to support high temperature tend to have a hard time getting
+ * good readings at room and lower temperatures. This means HEATER_X_RAW_LO_TEMP
+ * will probably be caught when the heating element first turns on during the
+ * preheating process, which will trigger a min_temp_error as a safety measure
+ * and force stop everything.
+ * To circumvent this limitation, we allow for a preheat time (during which,
+ * min_temp_error won't be triggered) and add a min_temp buffer to handle
+ * aberrant readings.
+ *
+ * If you want to enable this feature for your hotend thermistor(s)
+ * uncomment and set values > 0 in the constants below
+ */
+
+// The number of consecutive low temperature errors that can occur
+// before a min_temp_error is triggered. (Shouldn't be more than 10.)
+//#define MAX_CONSECUTIVE_LOW_TEMPERATURE_ERROR_ALLOWED 0
+
+// The number of milliseconds a hotend will preheat before starting to check
+// the temperature. This value should NOT be set to the time it takes the
+// hot end to reach the target temperature, but the time it takes to reach
+// the minimum temperature your thermistor can read. The lower the better/safer.
+// This shouldn't need to be more than 30 seconds (30000)
+//#define MILLISECONDS_PREHEAT_TIME 0
+
+// @section extruder
+
+// Extruder runout prevention.
+// If the machine is idle and the temperature over MINTEMP
+// then extrude some filament every couple of SECONDS.
+//#define EXTRUDER_RUNOUT_PREVENT
+#if ENABLED(EXTRUDER_RUNOUT_PREVENT)
+ #define EXTRUDER_RUNOUT_MINTEMP 190
+ #define EXTRUDER_RUNOUT_SECONDS 30
+ #define EXTRUDER_RUNOUT_SPEED 1500 // (mm/m)
+ #define EXTRUDER_RUNOUT_EXTRUDE 5 // (mm)
+#endif
+
+// @section temperature
+
+// Calibration for AD595 / AD8495 sensor to adjust temperature measurements.
+// The final temperature is calculated as (measuredTemp * GAIN) + OFFSET.
+#define TEMP_SENSOR_AD595_OFFSET 0.0
+#define TEMP_SENSOR_AD595_GAIN 1.0
+#define TEMP_SENSOR_AD8495_OFFSET 0.0
+#define TEMP_SENSOR_AD8495_GAIN 1.0
+
+/**
+ * Controller Fan
+ * To cool down the stepper drivers and MOSFETs.
+ *
+ * The fan will turn on automatically whenever any stepper is enabled
+ * and turn off after a set period after all steppers are turned off.
+ */
+//#define USE_CONTROLLER_FAN
+#if ENABLED(USE_CONTROLLER_FAN)
+ //#define CONTROLLER_FAN_PIN -1 // Set a custom pin for the controller fan
+ #define CONTROLLERFAN_SECS 60 // Duration in seconds for the fan to run after all motors are disabled
+ #define CONTROLLERFAN_SPEED 255 // 255 == full speed
+#endif
+
+// When first starting the main fan, run it at full speed for the
+// given number of milliseconds. This gets the fan spinning reliably
+// before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
+//#define FAN_KICKSTART_TIME 100
+
+/**
+ * PWM Fan Scaling
+ *
+ * Define the min/max speeds for PWM fans (as set with M106).
+ *
+ * With these options the M106 0-255 value range is scaled to a subset
+ * to ensure that the fan has enough power to spin, or to run lower
+ * current fans with higher current. (e.g., 5V/12V fans with 12V/24V)
+ * Value 0 always turns off the fan.
+ *
+ * Define one or both of these to override the default 0-255 range.
+ */
+//#define FAN_MIN_PWM 50
+//#define FAN_MAX_PWM 128
+
+// @section extruder
+
+/**
+ * Extruder cooling fans
+ *
+ * Extruder auto fans automatically turn on when their extruders'
+ * temperatures go above EXTRUDER_AUTO_FAN_TEMPERATURE.
+ *
+ * Your board's pins file specifies the recommended pins. Override those here
+ * or set to -1 to disable completely.
+ *
+ * Multiple extruders can be assigned to the same pin in which case
+ * the fan will turn on when any selected extruder is above the threshold.
+ */
+//#define E0_AUTO_FAN_PIN -1
+//#define E1_AUTO_FAN_PIN -1
+#define E2_AUTO_FAN_PIN -1
+#define E3_AUTO_FAN_PIN -1
+#define E4_AUTO_FAN_PIN -1
+#define E5_AUTO_FAN_PIN -1
+#define CHAMBER_AUTO_FAN_PIN -1
+#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
+#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
+
+/**
+ * Part-Cooling Fan Multiplexer
+ *
+ * This feature allows you to digitally multiplex the fan output.
+ * The multiplexer is automatically switched at tool-change.
+ * Set FANMUX[012]_PINs below for up to 2, 4, or 8 multiplexed fans.
+ */
+#define FANMUX0_PIN -1
+#define FANMUX1_PIN -1
+#define FANMUX2_PIN -1
+
+/**
+ * M355 Case Light on-off / brightness
+ */
+//#define CASE_LIGHT_ENABLE
+#if ENABLED(CASE_LIGHT_ENABLE)
+ //#define CASE_LIGHT_PIN 4 // Override the default pin if needed
+ #define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
+ #define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
+ #define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
+ //#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
+ //#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
+ #if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
+ #define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
+ #endif
+#endif
+
+//===========================================================================
+//============================ Mechanical Settings ==========================
+//===========================================================================
+
+// @section homing
+
+// If you want endstops to stay on (by default) even when not homing
+// enable this option. Override at any time with M120, M121.
+//#define ENDSTOPS_ALWAYS_ON_DEFAULT
+
+// @section extras
+
+//#define Z_LATE_ENABLE // Enable Z the last moment. Needed if your Z driver overheats.
+
+// Employ an external closed loop controller. Override pins here if needed.
+//#define EXTERNAL_CLOSED_LOOP_CONTROLLER
+#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
+ //#define CLOSED_LOOP_ENABLE_PIN -1
+ //#define CLOSED_LOOP_MOVE_COMPLETE_PIN -1
+#endif
+
+/**
+ * Dual Steppers / Dual Endstops
+ *
+ * This section will allow you to use extra E drivers to drive a second motor for X, Y, or Z axes.
+ *
+ * For example, set X_DUAL_STEPPER_DRIVERS setting to use a second motor. If the motors need to
+ * spin in opposite directions set INVERT_X2_VS_X_DIR. If the second motor needs its own endstop
+ * set X_DUAL_ENDSTOPS. This can adjust for "racking." Use X2_USE_ENDSTOP to set the endstop plug
+ * that should be used for the second endstop. Extra endstops will appear in the output of 'M119'.
+ *
+ * Use X_DUAL_ENDSTOP_ADJUSTMENT to adjust for mechanical imperfection. After homing both motors
+ * this offset is applied to the X2 motor. To find the offset home the X axis, and measure the error
+ * in X2. Dual endstop offsets can be set at runtime with 'M666 X Y Z'.
+ */
+
+//#define X_DUAL_STEPPER_DRIVERS
+#if ENABLED(X_DUAL_STEPPER_DRIVERS)
+ #define INVERT_X2_VS_X_DIR true // Set 'true' if X motors should rotate in opposite directions
+ //#define X_DUAL_ENDSTOPS
+ #if ENABLED(X_DUAL_ENDSTOPS)
+ #define X2_USE_ENDSTOP _XMAX_
+ #define X_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Y_DUAL_STEPPER_DRIVERS
+#if ENABLED(Y_DUAL_STEPPER_DRIVERS)
+ #define INVERT_Y2_VS_Y_DIR true // Set 'true' if Y motors should rotate in opposite directions
+ //#define Y_DUAL_ENDSTOPS
+ #if ENABLED(Y_DUAL_ENDSTOPS)
+ #define Y2_USE_ENDSTOP _YMAX_
+ #define Y_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Z_DUAL_STEPPER_DRIVERS
+#if ENABLED(Z_DUAL_STEPPER_DRIVERS)
+ //#define Z_DUAL_ENDSTOPS
+ #if ENABLED(Z_DUAL_ENDSTOPS)
+ #define Z2_USE_ENDSTOP _XMAX_
+ #define Z_DUAL_ENDSTOPS_ADJUSTMENT 0
+ #endif
+#endif
+
+//#define Z_TRIPLE_STEPPER_DRIVERS
+#if ENABLED(Z_TRIPLE_STEPPER_DRIVERS)
+ //#define Z_TRIPLE_ENDSTOPS
+ #if ENABLED(Z_TRIPLE_ENDSTOPS)
+ #define Z2_USE_ENDSTOP _XMAX_
+ #define Z3_USE_ENDSTOP _YMAX_
+ #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT2 0
+ #define Z_TRIPLE_ENDSTOPS_ADJUSTMENT3 0
+ #endif
+#endif
+
+/**
+ * Dual X Carriage
+ *
+ * This setup has two X carriages that can move independently, each with its own hotend.
+ * The carriages can be used to print an object with two colors or materials, or in
+ * "duplication mode" it can print two identical or X-mirrored objects simultaneously.
+ * The inactive carriage is parked automatically to prevent oozing.
+ * X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
+ * By default the X2 stepper is assigned to the first unused E plug on the board.
+ */
+//#define DUAL_X_CARRIAGE
+#if ENABLED(DUAL_X_CARRIAGE)
+ #define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
+ #define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
+ #define X2_MIN_POS 80 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
+ #define X2_MAX_POS 353 // set maximum to the distance between toolheads when both heads are homed
+ #define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
+ #define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
+ // However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
+ // override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
+ // without modifying the firmware (through the "M218 T1 X???" command).
+ // Remember: you should set the second extruder x-offset to 0 in your slicer.
+
+ // There are a few selectable movement modes for dual x-carriages using M605 S
+ // Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
+ // as long as it supports dual x-carriages. (M605 S0)
+ // Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
+ // that additional slicer support is not required. (M605 S1)
+ // Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
+ // actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
+ // once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
+
+ // This is the default power-up mode which can be later using M605.
+ #define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_FULL_CONTROL_MODE
+
+ // Default x offset in duplication mode (typically set to half print bed width)
+ #define DEFAULT_DUPLICATION_X_OFFSET 100
+
+#endif // DUAL_X_CARRIAGE
+
+// Activate a solenoid on the active extruder with M380. Disable all with M381.
+// Define SOL0_PIN, SOL1_PIN, etc., for each extruder that has a solenoid.
+//#define EXT_SOLENOID
+
+// @section homing
+
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
+#define X_HOME_BUMP_MM 5
+#define Y_HOME_BUMP_MM 5
+#define Z_HOME_BUMP_MM 2
+#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
+//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
+
+// When G28 is called, this option will make Y home before X
+//#define HOME_Y_BEFORE_X
+
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
+
+/**
+ * Z Steppers Auto-Alignment
+ * Add the G34 command to align multiple Z steppers using a bed probe.
+ */
+//#define Z_STEPPER_AUTO_ALIGN
+#if ENABLED(Z_STEPPER_AUTO_ALIGN)
+ // Define probe X and Y positions for Z1, Z2 [, Z3]
+ #define Z_STEPPER_ALIGN_X { 10, 150, 290 }
+ #define Z_STEPPER_ALIGN_Y { 290, 10, 290 }
+ // Set number of iterations to align
+ #define Z_STEPPER_ALIGN_ITERATIONS 3
+ // Enable to restore leveling setup after operation
+ #define RESTORE_LEVELING_AFTER_G34
+ // Use the amplification factor to de-/increase correction step.
+ // In case the stepper (spindle) position is further out than the test point
+ // Use a value > 1. NOTE: This may cause instability
+ #define Z_STEPPER_ALIGN_AMP 1.0
+ // Stop criterion. If the accuracy is better than this stop iterating early
+ #define Z_STEPPER_ALIGN_ACC 0.02
+#endif
+
+// @section machine
+
+#define AXIS_RELATIVE_MODES {false, false, false, false}
+
+// Allow duplication mode with a basic dual-nozzle extruder
+//#define DUAL_NOZZLE_DUPLICATION_MODE
+
+// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
+#define INVERT_X_STEP_PIN false
+#define INVERT_Y_STEP_PIN false
+#define INVERT_Z_STEP_PIN false
+#define INVERT_E_STEP_PIN false
+
+// Default stepper release if idle. Set to 0 to deactivate.
+// Steppers will shut down DEFAULT_STEPPER_DEACTIVE_TIME seconds after the last move when DISABLE_INACTIVE_? is true.
+// Time can be set by M18 and M84.
+#define DEFAULT_STEPPER_DEACTIVE_TIME 120
+#define DISABLE_INACTIVE_X true
+#define DISABLE_INACTIVE_Y true
+#define DISABLE_INACTIVE_Z true // set to false if the nozzle will fall down on your printed part when print has finished.
+#define DISABLE_INACTIVE_E true
+
+#define DEFAULT_MINIMUMFEEDRATE 0.0 // minimum feedrate
+#define DEFAULT_MINTRAVELFEEDRATE 0.0
+
+//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated
+
+// @section lcd
+
+#if ENABLED(ULTIPANEL)
+ #define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
+ #define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
+ #define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
+#endif
+
+// @section extras
+
+// minimum time in microseconds that a movement needs to take if the buffer is emptied.
+#define DEFAULT_MINSEGMENTTIME 20000
+
+// If defined the movements slow down when the look ahead buffer is only half full
+#define SLOWDOWN
+
+// Frequency limit
+// See nophead's blog for more info
+// Not working O
+//#define XY_FREQUENCY_LIMIT 15
+
+// Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
+// of the buffer and all stops. This should not be much greater than zero and should only be changed
+// if unwanted behavior is observed on a user's machine when running at very slow speeds.
+#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
+
+//
+// Backlash Compensation
+// Adds extra movement to axes on direction-changes to account for backlash.
+//
+//#define BACKLASH_COMPENSATION
+#if ENABLED(BACKLASH_COMPENSATION)
+ // Define values for backlash distance and correction.
+ // If BACKLASH_GCODE is enabled these values are the defaults.
+ #define BACKLASH_DISTANCE_MM { 0, 0, 0 } // (mm)
+ #define BACKLASH_CORRECTION 0.0 // 0.0 = no correction; 1.0 = full correction
+
+ // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
+ // to reduce print artifacts. (Enabling this is costly in memory and computation!)
+ //#define BACKLASH_SMOOTHING_MM 3 // (mm)
+
+ // Add runtime configuration and tuning of backlash values (M425)
+ //#define BACKLASH_GCODE
+
+ #if ENABLED(BACKLASH_GCODE)
+ // Measure the Z backlash when probing (G29) and set with "M425 Z"
+ #define MEASURE_BACKLASH_WHEN_PROBING
+
+ #if ENABLED(MEASURE_BACKLASH_WHEN_PROBING)
+ // When measuring, the probe will move up to BACKLASH_MEASUREMENT_LIMIT
+ // mm away from point of contact in BACKLASH_MEASUREMENT_RESOLUTION
+ // increments while checking for the contact to be broken.
+ #define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
+ #define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
+ #define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/m)
+ #endif
+ #endif
+#endif
+
+/**
+ * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
+ * below 1kHz (for AVR) or 10kHz (for ARM), where aliasing between axes in multi-axis moves causes audible
+ * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
+ * lowest stepping frequencies.
+ */
+//#define ADAPTIVE_STEP_SMOOTHING
+
+/**
+ * Custom Microstepping
+ * Override as-needed for your setup. Up to 3 MS pins are supported.
+ */
+//#define MICROSTEP1 LOW,LOW,LOW
+//#define MICROSTEP2 HIGH,LOW,LOW
+//#define MICROSTEP4 LOW,HIGH,LOW
+//#define MICROSTEP8 HIGH,HIGH,LOW
+//#define MICROSTEP16 LOW,LOW,HIGH
+//#define MICROSTEP32 HIGH,LOW,HIGH
+
+// Microstep setting (Only functional when stepper driver microstep pins are connected to MCU.
+#define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
+
+/**
+ * @section stepper motor current
+ *
+ * Some boards have a means of setting the stepper motor current via firmware.
+ *
+ * The power on motor currents are set by:
+ * PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
+ * known compatible chips: A4982
+ * DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
+ * known compatible chips: AD5206
+ * DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
+ * known compatible chips: MCP4728
+ * DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
+ * known compatible chips: MCP4451, MCP4018
+ *
+ * Motor currents can also be set by M907 - M910 and by the LCD.
+ * M907 - applies to all.
+ * M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
+ * M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
+ */
+//#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 } // Values in milliamps
+//#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 } // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
+//#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 } // Default drive percent - X, Y, Z, E axis
+
+// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
+//#define DIGIPOT_I2C
+#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A)
+ /**
+ * Common slave addresses:
+ *
+ * A (A shifted) B (B shifted) IC
+ * Smoothie 0x2C (0x58) 0x2D (0x5A) MCP4451
+ * AZTEEG_X3_PRO 0x2C (0x58) 0x2E (0x5C) MCP4451
+ * AZTEEG_X5_MINI_WIFI 0x58 0x5C MCP4451
+ * MIGHTYBOARD_REVE 0x2F (0x5E) MCP4018
+ */
+ #define DIGIPOT_I2C_ADDRESS_A 0x2C // unshifted slave address for first DIGIPOT
+ #define DIGIPOT_I2C_ADDRESS_B 0x2D // unshifted slave address for second DIGIPOT
+#endif
+
+//#define DIGIPOT_MCP4018 // Requires library from https://github.com/stawel/SlowSoftI2CMaster
+#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4 AZTEEG_X3_PRO: 8 MKS SBASE: 5
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
+#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
+
+//===========================================================================
+//=============================Additional Features===========================
+//===========================================================================
+
+// @section lcd
+
+// Change values more rapidly when the encoder is rotated faster
+#define ENCODER_RATE_MULTIPLIER
+#if ENABLED(ENCODER_RATE_MULTIPLIER)
+ #define ENCODER_10X_STEPS_PER_SEC 30 // (steps/s) Encoder rate for 10x speed
+ #define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
+#endif
+
+// Include a page of printer information in the LCD Main Menu
+//#define LCD_INFO_MENU
+
+// Scroll a longer status message into view
+//#define STATUS_MESSAGE_SCROLLING
+
+// On the Info Screen, display XY with one decimal place when possible
+//#define LCD_DECIMAL_SMALL_XY
+
+// The timeout (in ms) to return to the status screen from sub-menus
+//#define LCD_TIMEOUT_TO_STATUS 15000
+
+// Add an 'M73' G-code to set the current percentage
+//#define LCD_SET_PROGRESS_MANUALLY
+
+#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
+ //#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
+ #if ENABLED(LCD_PROGRESS_BAR)
+ #define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
+ #define PROGRESS_BAR_MSG_TIME 3000 // (ms) Amount of time to show the status message
+ #define PROGRESS_MSG_EXPIRE 0 // (ms) Amount of time to retain the status message (0=forever)
+ //#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
+ //#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
+ #endif
+#endif // HAS_PRINT_PROGRESS
+
+/**
+ * LED Control Menu
+ * Enable this feature to add LED Control to the LCD menu
+ */
+//#define LED_CONTROL_MENU
+#if ENABLED(LED_CONTROL_MENU)
+ #define LED_COLOR_PRESETS // Enable the Preset Color menu option
+ #if ENABLED(LED_COLOR_PRESETS)
+ #define LED_USER_PRESET_RED 255 // User defined RED value
+ #define LED_USER_PRESET_GREEN 128 // User defined GREEN value
+ #define LED_USER_PRESET_BLUE 0 // User defined BLUE value
+ #define LED_USER_PRESET_WHITE 255 // User defined WHITE value
+ #define LED_USER_PRESET_BRIGHTNESS 255 // User defined intensity
+ //#define LED_USER_PRESET_STARTUP // Have the printer display the user preset color on startup
+ #endif
+#endif // LED_CONTROL_MENU
+
+#if ENABLED(SDSUPPORT)
+
+ // Some RAMPS and other boards don't detect when an SD card is inserted. You can work
+ // around this by connecting a push button or single throw switch to the pin defined
+ // as SD_DETECT_PIN in your board's pins definitions.
+ // This setting should be disabled unless you are using a push button, pulling the pin to ground.
+ // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
+ #define SD_DETECT_INVERTED
+
+ #define SD_FINISHED_STEPPERRELEASE true // Disable steppers when SD Print is finished
+ #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
+
+ // Reverse SD sort to show "more recent" files first, according to the card's FAT.
+ // Since the FAT gets out of order with usage, SDCARD_SORT_ALPHA is recommended.
+ #define SDCARD_RATHERRECENTFIRST
+
+ // Add an option in the menu to run all auto#.g files
+ //#define MENU_ADDAUTOSTART
+
+ /**
+ * Continue after Power-Loss (Creality3D)
+ *
+ * Store the current state to the SD Card at the start of each layer
+ * during SD printing. If the recovery file is found at boot time, present
+ * an option on the LCD screen to continue the print from the last-known
+ * point in the file.
+ */
+ //#define POWER_LOSS_RECOVERY
+ #if ENABLED(POWER_LOSS_RECOVERY)
+ //#define POWER_LOSS_PIN 44 // Pin to detect power loss
+ //#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
+ #endif
+
+ /**
+ * Sort SD file listings in alphabetical order.
+ *
+ * With this option enabled, items on SD cards will be sorted
+ * by name for easier navigation.
+ *
+ * By default...
+ *
+ * - Use the slowest -but safest- method for sorting.
+ * - Folders are sorted to the top.
+ * - The sort key is statically allocated.
+ * - No added G-code (M34) support.
+ * - 40 item sorting limit. (Items after the first 40 are unsorted.)
+ *
+ * SD sorting uses static allocation (as set by SDSORT_LIMIT), allowing the
+ * compiler to calculate the worst-case usage and throw an error if the SRAM
+ * limit is exceeded.
+ *
+ * - SDSORT_USES_RAM provides faster sorting via a static directory buffer.
+ * - SDSORT_USES_STACK does the same, but uses a local stack-based buffer.
+ * - SDSORT_CACHE_NAMES will retain the sorted file listing in RAM. (Expensive!)
+ * - SDSORT_DYNAMIC_RAM only uses RAM when the SD menu is visible. (Use with caution!)
+ */
+ //#define SDCARD_SORT_ALPHA
+
+ // SD Card Sorting options
+ #if ENABLED(SDCARD_SORT_ALPHA)
+ #define SDSORT_LIMIT 40 // Maximum number of sorted items (10-256). Costs 27 bytes each.
+ #define FOLDER_SORTING -1 // -1=above 0=none 1=below
+ #define SDSORT_GCODE false // Allow turning sorting on/off with LCD and M34 g-code.
+ #define SDSORT_USES_RAM false // Pre-allocate a static array for faster pre-sorting.
+ #define SDSORT_USES_STACK false // Prefer the stack for pre-sorting to give back some SRAM. (Negated by next 2 options.)
+ #define SDSORT_CACHE_NAMES false // Keep sorted items in RAM longer for speedy performance. Most expensive option.
+ #define SDSORT_DYNAMIC_RAM false // Use dynamic allocation (within SD menus). Least expensive option. Set SDSORT_LIMIT before use!
+ #define SDSORT_CACHE_VFATS 2 // Maximum number of 13-byte VFAT entries to use for sorting.
+ // Note: Only affects SCROLL_LONG_FILENAMES with SDSORT_CACHE_NAMES but not SDSORT_DYNAMIC_RAM.
+ #endif
+
+ // This allows hosts to request long names for files and folders with M33
+ //#define LONG_FILENAME_HOST_SUPPORT
+
+ // Enable this option to scroll long filenames in the SD card menu
+ //#define SCROLL_LONG_FILENAMES
+
+ /**
+ * This option allows you to abort SD printing when any endstop is triggered.
+ * This feature must be enabled with "M540 S1" or from the LCD menu.
+ * To have any effect, endstops must be enabled during SD printing.
+ */
+ //#define ABORT_ON_ENDSTOP_HIT_FEATURE_ENABLED
+
+ /**
+ * This option makes it easier to print the same SD Card file again.
+ * On print completion the LCD Menu will open with the file selected.
+ * You can just click to start the print, or navigate elsewhere.
+ */
+ //#define SD_REPRINT_LAST_SELECTED_FILE
+
+ /**
+ * Auto-report SdCard status with M27 S
+ */
+ //#define AUTO_REPORT_SD_STATUS
+
+ /**
+ * Support for USB thumb drives using an Arduino USB Host Shield or
+ * equivalent MAX3421E breakout board. The USB thumb drive will appear
+ * to Marlin as an SD card.
+ *
+ * The MAX3421E must be assigned the same pins as the SD card reader, with
+ * the following pin mapping:
+ *
+ * SCLK, MOSI, MISO --> SCLK, MOSI, MISO
+ * INT --> SD_DETECT_PIN
+ * SS --> SDSS
+ */
+ //#define USB_FLASH_DRIVE_SUPPORT
+ #if ENABLED(USB_FLASH_DRIVE_SUPPORT)
+ #define USB_CS_PIN SDSS
+ #define USB_INTR_PIN SD_DETECT_PIN
+ #endif
+
+ /**
+ * When using a bootloader that supports SD-Firmware-Flashing,
+ * add a menu item to activate SD-FW-Update on the next reboot.
+ *
+ * Requires ATMEGA2560 (Arduino Mega)
+ *
+ * Tested with this bootloader:
+ * https://github.com/FleetProbe/MicroBridge-Arduino-ATMega2560
+ */
+ //#define SD_FIRMWARE_UPDATE
+ #if ENABLED(SD_FIRMWARE_UPDATE)
+ #define SD_FIRMWARE_UPDATE_EEPROM_ADDR 0x1FF
+ #define SD_FIRMWARE_UPDATE_ACTIVE_VALUE 0xF0
+ #define SD_FIRMWARE_UPDATE_INACTIVE_VALUE 0xFF
+ #endif
+
+ // Add an optimized binary file transfer mode, initiated with 'M28 B1'
+ //#define FAST_FILE_TRANSFER
+
+#endif // SDSUPPORT
+
+/**
+ * Additional options for Graphical Displays
+ *
+ * Use the optimizations here to improve printing performance,
+ * which can be adversely affected by graphical display drawing,
+ * especially when doing several short moves, and when printing
+ * on DELTA and SCARA machines.
+ *
+ * Some of these options may result in the display lagging behind
+ * controller events, as there is a trade-off between reliable
+ * printing performance versus fast display updates.
+ */
+#if HAS_GRAPHICAL_LCD
+ // Show SD percentage next to the progress bar
+ //#define DOGM_SD_PERCENT
+
+ // Enable to save many cycles by drawing a hollow frame on the Info Screen
+ #define XYZ_HOLLOW_FRAME
+
+ // Enable to save many cycles by drawing a hollow frame on Menu Screens
+ #define MENU_HOLLOW_FRAME
+
+ // A bigger font is available for edit items. Costs 3120 bytes of PROGMEM.
+ // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+ //#define USE_BIG_EDIT_FONT
+
+ // A smaller font may be used on the Info Screen. Costs 2300 bytes of PROGMEM.
+ // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
+ //#define USE_SMALL_INFOFONT
+
+ // Enable this option and reduce the value to optimize screen updates.
+ // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
+ //#define DOGM_SPI_DELAY_US 5
+
+ // Swap the CW/CCW indicators in the graphics overlay
+ //#define OVERLAY_GFX_REVERSE
+
+ /**
+ * ST7920-based LCDs can emulate a 16 x 4 character display using
+ * the ST7920 character-generator for very fast screen updates.
+ * Enable LIGHTWEIGHT_UI to use this special display mode.
+ *
+ * Since LIGHTWEIGHT_UI has limited space, the position and status
+ * message occupy the same line. Set STATUS_EXPIRE_SECONDS to the
+ * length of time to display the status message before clearing.
+ *
+ * Set STATUS_EXPIRE_SECONDS to zero to never clear the status.
+ * This will prevent position updates from being displayed.
+ */
+ #if ENABLED(U8GLIB_ST7920)
+ //#define LIGHTWEIGHT_UI
+ #if ENABLED(LIGHTWEIGHT_UI)
+ #define STATUS_EXPIRE_SECONDS 20
+ #endif
+ #endif
+
+ /**
+ * Status (Info) Screen customizations
+ * These options may affect code size and screen render time.
+ * Custom status screens can forcibly override these settings.
+ */
+ //#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
+ //#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
+ #define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
+ #define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
+ #define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
+ //#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
+ //#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
+ //#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
+ //#define STATUS_HEAT_PERCENT // Show heating in a progress bar
+
+#endif // HAS_GRAPHICAL_LCD
+
+// @section safety
+
+// The hardware watchdog should reset the microcontroller disabling all outputs,
+// in case the firmware gets stuck and doesn't do temperature regulation.
+#define USE_WATCHDOG
+
+#if ENABLED(USE_WATCHDOG)
+ // If you have a watchdog reboot in an ArduinoMega2560 then the device will hang forever, as a watchdog reset will leave the watchdog on.
+ // The "WATCHDOG_RESET_MANUAL" goes around this by not using the hardware reset.
+ // However, THIS FEATURE IS UNSAFE!, as it will only work if interrupts are disabled. And the code could hang in an interrupt routine with interrupts disabled.
+ //#define WATCHDOG_RESET_MANUAL
+#endif
+
+// @section lcd
+
+/**
+ * Babystepping enables movement of the axes by tiny increments without changing
+ * the current position values. This feature is used primarily to adjust the Z
+ * axis in the first layer of a print in real-time.
+ *
+ * Warning: Does not respect endstops!
+ */
+//#define BABYSTEPPING
+#if ENABLED(BABYSTEPPING)
+ //#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
+ #define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
+ #define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
+
+ //#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
+ #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
+ #define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
+ // Note: Extra time may be added to mitigate controller latency.
+ #endif
+
+ //#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
+ #if ENABLED(MOVE_Z_WHEN_IDLE)
+ #define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
+ #endif
+
+ //#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
+ #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
+ //#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
+ //#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
+ #endif
+#endif
+
+// @section extruder
+
+/**
+ * Linear Pressure Control v1.5
+ *
+ * Assumption: advance [steps] = k * (delta velocity [steps/s])
+ * K=0 means advance disabled.
+ *
+ * NOTE: K values for LIN_ADVANCE 1.5 differ from earlier versions!
+ *
+ * Set K around 0.22 for 3mm PLA Direct Drive with ~6.5cm between the drive gear and heatbreak.
+ * Larger K values will be needed for flexible filament and greater distances.
+ * If this algorithm produces a higher speed offset than the extruder can handle (compared to E jerk)
+ * print acceleration will be reduced during the affected moves to keep within the limit.
+ *
+ * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
+ * Mention @Sebastianv650 on GitHub to alert the author of any issues.
+ */
+//#define LIN_ADVANCE
+#if ENABLED(LIN_ADVANCE)
+ #define LIN_ADVANCE_K 0.22 // Unit: mm compression per 1mm/s extruder speed
+ //#define LA_DEBUG // If enabled, this will generate debug information output over USB.
+#endif
+
+// @section leveling
+
+#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
+ // Override the mesh area if the automatic (max) area is too large
+ //#define MESH_MIN_X MESH_INSET
+ //#define MESH_MIN_Y MESH_INSET
+ //#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
+ //#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
+#endif
+
+/**
+ * Repeatedly attempt G29 leveling until it succeeds.
+ * Stop after G29_MAX_RETRIES attempts.
+ */
+//#define G29_RETRY_AND_RECOVER
+#if ENABLED(G29_RETRY_AND_RECOVER)
+ #define G29_MAX_RETRIES 3
+ #define G29_HALT_ON_FAILURE
+ /**
+ * Specify the GCODE commands that will be executed when leveling succeeds,
+ * between attempts, and after the maximum number of retries have been tried.
+ */
+ #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
+ #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
+ #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
+ /**
+ * Specify an action command to send to the host on a recovery attempt or failure.
+ * Will be sent in the form '//action:ACTION_ON_G29_FAILURE', e.g. '//action:probe_failed'.
+ * The host must be configured to handle the action command.
+ */
+ #define G29_ACTION_ON_RECOVER "probe_rewipe"
+ #define G29_ACTION_ON_FAILURE "probe_failed"
+#endif
+
+// @section extras
+
+//
+// G2/G3 Arc Support
+//
+#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
+#if ENABLED(ARC_SUPPORT)
+ #define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
+ #define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
+ //#define ARC_P_CIRCLES // Enable the 'P' parameter to specify complete circles
+ //#define CNC_WORKSPACE_PLANES // Allow G2/G3 to operate in XY, ZX, or YZ planes
+#endif
+
+// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
+//#define BEZIER_CURVE_SUPPORT
+
+// G38.2 and G38.3 Probe Target
+// Set MULTIPLE_PROBING if you want G38 to double touch
+//#define G38_PROBE_TARGET
+#if ENABLED(G38_PROBE_TARGET)
+ #define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
+#endif
+
+// Moves (or segments) with fewer steps than this will be joined with the next move
+#define MIN_STEPS_PER_SEGMENT 6
+
+/**
+ * Minimum delay after setting the stepper DIR (in ns)
+ * 0 : No delay (Expect at least 10µS since one Stepper ISR must transpire)
+ * 20 : Minimum for TMC2xxx drivers
+ * 200 : Minimum for A4988 drivers
+ * 400 : Minimum for A5984 drivers
+ * 500 : Minimum for LV8729 drivers (guess, no info in datasheet)
+ * 650 : Minimum for DRV8825 drivers
+ * 1500 : Minimum for TB6600 drivers (guess, no info in datasheet)
+ * 15000 : Minimum for TB6560 drivers (guess, no info in datasheet)
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_DIR_DELAY 650
+
+/**
+ * Minimum stepper driver pulse width (in µs)
+ * 0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
+ * 1 : Minimum for A4988, A5984, and LV8729 stepper drivers
+ * 2 : Minimum for DRV8825 stepper drivers
+ * 3 : Minimum for TB6600 stepper drivers
+ * 30 : Minimum for TB6560 stepper drivers
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MINIMUM_STEPPER_PULSE 2
+
+/**
+ * Maximum stepping rate (in Hz) the stepper driver allows
+ * If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * 500000 : Maximum for A4988 stepper driver
+ * 400000 : Maximum for TMC2xxx stepper drivers
+ * 250000 : Maximum for DRV8825 stepper driver
+ * 150000 : Maximum for TB6600 stepper driver
+ * 130000 : Maximum for LV8729 stepper driver
+ * 15000 : Maximum for TB6560 stepper driver
+ *
+ * Override the default value based on the driver type set in Configuration.h.
+ */
+//#define MAXIMUM_STEPPER_RATE 250000
+
+// @section temperature
+
+// Control heater 0 and heater 1 in parallel.
+//#define HEATERS_PARALLEL
+
+//===========================================================================
+//================================= Buffers =================================
+//===========================================================================
+
+// @section hidden
+
+// The number of linear motions that can be in the plan at any give time.
+// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
+#if ENABLED(SDSUPPORT)
+ #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+#else
+ #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
+#endif
+
+// @section serial
+
+// The ASCII buffer for serial input
+#define MAX_CMD_SIZE 96
+#define BUFSIZE 4
+
+// Transmission to Host Buffer Size
+// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+// To buffer a simple "ok" you need 4 bytes.
+// For ADVANCED_OK (M105) you need 32 bytes.
+// For debug-echo: 128 bytes for the optimal speed.
+// Other output doesn't need to be that speedy.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+#define TX_BUFFER_SIZE 0
+
+// Host Receive Buffer Size
+// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+// To use flow control, set this buffer size to at least 1024 bytes.
+// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+//#define RX_BUFFER_SIZE 1024
+
+#if RX_BUFFER_SIZE >= 1024
+ // Enable to have the controller send XON/XOFF control characters to
+ // the host to signal the RX buffer is becoming full.
+ //#define SERIAL_XON_XOFF
+#endif
+
+#if ENABLED(SDSUPPORT)
+ // Enable this option to collect and display the maximum
+ // RX queue usage after transferring a file to SD.
+ //#define SERIAL_STATS_MAX_RX_QUEUED
+
+ // Enable this option to collect and display the number
+ // of dropped bytes after a file transfer to SD.
+ //#define SERIAL_STATS_DROPPED_RX
+#endif
+
+// Enable an emergency-command parser to intercept certain commands as they
+// enter the serial receive buffer, so they cannot be blocked.
+// Currently handles M108, M112, M410
+// Does not work on boards using AT90USB (USBCON) processors!
+//#define EMERGENCY_PARSER
+
+// Bad Serial-connections can miss a received command by sending an 'ok'
+// Therefore some clients abort after 30 seconds in a timeout.
+// Some other clients start sending commands while receiving a 'wait'.
+// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
+//#define NO_TIMEOUTS 1000 // Milliseconds
+
+// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
+//#define ADVANCED_OK
+
+// Printrun may have trouble receiving long strings all at once.
+// This option inserts short delays between lines of serial output.
+#define SERIAL_OVERRUN_PROTECTION
+
+// @section extras
+
+/**
+ * Extra Fan Speed
+ * Adds a secondary fan speed for each print-cooling fan.
+ * 'M106 P T3-255' : Set a secondary speed for
+ * 'M106 P T2' : Use the set secondary speed
+ * 'M106 P T1' : Restore the previous fan speed
+ */
+//#define EXTRA_FAN_SPEED
+
+/**
+ * Firmware-based and LCD-controlled retract
+ *
+ * Add G10 / G11 commands for automatic firmware-based retract / recover.
+ * Use M207 and M208 to define parameters for retract / recover.
+ *
+ * Use M209 to enable or disable auto-retract.
+ * With auto-retract enabled, all G1 E moves within the set range
+ * will be converted to firmware-based retract/recover moves.
+ *
+ * Be sure to turn off auto-retract during filament change.
+ *
+ * Note that M207 / M208 / M209 settings are saved to EEPROM.
+ *
+ */
+//#define FWRETRACT
+#if ENABLED(FWRETRACT)
+ #define FWRETRACT_AUTORETRACT // costs ~500 bytes of PROGMEM
+ #if ENABLED(FWRETRACT_AUTORETRACT)
+ #define MIN_AUTORETRACT 0.1 // When auto-retract is on, convert E moves of this length and over
+ #define MAX_AUTORETRACT 10.0 // Upper limit for auto-retract conversion
+ #endif
+ #define RETRACT_LENGTH 3 // Default retract length (positive mm)
+ #define RETRACT_LENGTH_SWAP 13 // Default swap retract length (positive mm), for extruder change
+ #define RETRACT_FEEDRATE 45 // Default feedrate for retracting (mm/s)
+ #define RETRACT_ZRAISE 0 // Default retract Z-raise (mm)
+ #define RETRACT_RECOVER_LENGTH 0 // Default additional recover length (mm, added to retract length when recovering)
+ #define RETRACT_RECOVER_LENGTH_SWAP 0 // Default additional swap recover length (mm, added to retract length when recovering from extruder change)
+ #define RETRACT_RECOVER_FEEDRATE 8 // Default feedrate for recovering from retraction (mm/s)
+ #define RETRACT_RECOVER_FEEDRATE_SWAP 8 // Default feedrate for recovering from swap retraction (mm/s)
+ #if ENABLED(MIXING_EXTRUDER)
+ //#define RETRACT_SYNC_MIXING // Retract and restore all mixing steppers simultaneously
+ #endif
+#endif
+
+/**
+ * Universal tool change settings.
+ * Applies to all types of extruders except where explicitly noted.
+ */
+#if EXTRUDERS > 1
+ // Z raise distance for tool-change, as needed for some extruders
+ #define TOOLCHANGE_ZRAISE 2 // (mm)
+
+ // Retract and prime filament on tool-change
+ //#define TOOLCHANGE_FILAMENT_SWAP
+ #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
+ #define TOOLCHANGE_FIL_SWAP_LENGTH 12 // (mm)
+ #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600 // (mm/m)
+ #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED 3600 // (mm/m)
+ #endif
+
+ /**
+ * Position to park head during tool change.
+ * Doesn't apply to SWITCHING_TOOLHEAD, DUAL_X_CARRIAGE, or PARKING_EXTRUDER
+ */
+ //#define TOOLCHANGE_PARK
+ #if ENABLED(TOOLCHANGE_PARK)
+ #define TOOLCHANGE_PARK_XY { X_MIN_POS + 10, Y_MIN_POS + 10 }
+ #define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
+ #endif
+#endif
+
+/**
+ * Advanced Pause
+ * Experimental feature for filament change support and for parking the nozzle when paused.
+ * Adds the GCode M600 for initiating filament change.
+ * If PARK_HEAD_ON_PAUSE enabled, adds the GCode M125 to pause printing and park the nozzle.
+ *
+ * Requires an LCD display.
+ * Requires NOZZLE_PARK_FEATURE.
+ * This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
+ */
+//#define ADVANCED_PAUSE_FEATURE
+#if ENABLED(ADVANCED_PAUSE_FEATURE)
+ #define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
+ #define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
+ // This short retract is done immediately, before parking the nozzle.
+ #define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+ #define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
+ // For Bowden, the full length of the tube and nozzle.
+ // For direct drive, the full length of the nozzle.
+ // Set to 0 for manual unloading.
+ #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
+ #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
+ // 0 to disable start loading and skip to fast load only
+ #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
+ #define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
+ #define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
+ // For Bowden, the full length of the tube and nozzle.
+ // For direct drive, the full length of the nozzle.
+ //#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
+ #define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
+ #define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
+ // Set to 0 for manual extrusion.
+ // Filament can be extruded repeatedly from the Filament Change menu
+ // until extrusion is consistent, and to purge old filament.
+
+ // Filament Unload does a Retract, Delay, and Purge first:
+ #define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
+ #define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
+ #define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
+
+ #define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
+ #define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
+ #define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
+
+ //#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
+ //#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
+
+ //#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+ //#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+#endif
+
+// @section tmc
+
+/**
+ * TMC26X Stepper Driver options
+ *
+ * The TMC26XStepper library is required for this stepper driver.
+ * https://github.com/trinamic/TMC26XStepper
+ */
+#if HAS_DRIVER(TMC26X)
+
+ #define X_MAX_CURRENT 1000 // in mA
+ #define X_SENSE_RESISTOR 91 // in mOhms
+ #define X_MICROSTEPS 16 // number of microsteps
+
+ #define X2_MAX_CURRENT 1000
+ #define X2_SENSE_RESISTOR 91
+ #define X2_MICROSTEPS 16
+
+ #define Y_MAX_CURRENT 1000
+ #define Y_SENSE_RESISTOR 91
+ #define Y_MICROSTEPS 16
+
+ #define Y2_MAX_CURRENT 1000
+ #define Y2_SENSE_RESISTOR 91
+ #define Y2_MICROSTEPS 16
+
+ #define Z_MAX_CURRENT 1000
+ #define Z_SENSE_RESISTOR 91
+ #define Z_MICROSTEPS 16
+
+ #define Z2_MAX_CURRENT 1000
+ #define Z2_SENSE_RESISTOR 91
+ #define Z2_MICROSTEPS 16
+
+ #define Z3_MAX_CURRENT 1000
+ #define Z3_SENSE_RESISTOR 91
+ #define Z3_MICROSTEPS 16
+
+ #define E0_MAX_CURRENT 1000
+ #define E0_SENSE_RESISTOR 91
+ #define E0_MICROSTEPS 16
+
+ #define E1_MAX_CURRENT 1000
+ #define E1_SENSE_RESISTOR 91
+ #define E1_MICROSTEPS 16
+
+ #define E2_MAX_CURRENT 1000
+ #define E2_SENSE_RESISTOR 91
+ #define E2_MICROSTEPS 16
+
+ #define E3_MAX_CURRENT 1000
+ #define E3_SENSE_RESISTOR 91
+ #define E3_MICROSTEPS 16
+
+ #define E4_MAX_CURRENT 1000
+ #define E4_SENSE_RESISTOR 91
+ #define E4_MICROSTEPS 16
+
+ #define E5_MAX_CURRENT 1000
+ #define E5_SENSE_RESISTOR 91
+ #define E5_MICROSTEPS 16
+
+#endif // TMC26X
+
+// @section tmc_smart
+
+/**
+ * To use TMC2130 stepper drivers in SPI mode connect your SPI pins to
+ * the hardware SPI interface on your board and define the required CS pins
+ * in your `pins_MYBOARD.h` file. (e.g., RAMPS 1.4 uses AUX3 pins `X_CS_PIN 53`, `Y_CS_PIN 49`, etc.).
+ * You may also use software SPI if you wish to use general purpose IO pins.
+ *
+ * To use TMC2208 stepper UART-configurable stepper drivers
+ * connect #_SERIAL_TX_PIN to the driver side PDN_UART pin with a 1K resistor.
+ * To use the reading capabilities, also connect #_SERIAL_RX_PIN
+ * to PDN_UART without a resistor.
+ * The drivers can also be used with hardware serial.
+ *
+ * TMCStepper library is required for connected TMC stepper drivers.
+ * https://github.com/teemuatlut/TMCStepper
+ */
+#if HAS_TRINAMIC
+
+ #define R_SENSE 0.11 // R_sense resistor for SilentStepStick2130
+ #define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
+ #define INTERPOLATE true // Interpolate X/Y/Z_MICROSTEPS to 256
+
+ #define X_CURRENT 800 // rms current in mA. Multiply by 1.41 for peak current.
+ #define X_MICROSTEPS 16 // 0..256
+
+ #define Y_CURRENT 800
+ #define Y_MICROSTEPS 16
+
+ #define Z_CURRENT 800
+ #define Z_MICROSTEPS 16
+
+ #define X2_CURRENT 800
+ #define X2_MICROSTEPS 16
+
+ #define Y2_CURRENT 800
+ #define Y2_MICROSTEPS 16
+
+ #define Z2_CURRENT 800
+ #define Z2_MICROSTEPS 16
+
+ #define Z3_CURRENT 800
+ #define Z3_MICROSTEPS 16
+
+ #define E0_CURRENT 800
+ #define E0_MICROSTEPS 16
+
+ #define E1_CURRENT 800
+ #define E1_MICROSTEPS 16
+
+ #define E2_CURRENT 800
+ #define E2_MICROSTEPS 16
+
+ #define E3_CURRENT 800
+ #define E3_MICROSTEPS 16
+
+ #define E4_CURRENT 800
+ #define E4_MICROSTEPS 16
+
+ #define E5_CURRENT 800
+ #define E5_MICROSTEPS 16
+
+ /**
+ * Override default SPI pins for TMC2130 and TMC2660 drivers here.
+ * The default pins can be found in your board's pins file.
+ */
+ //#define X_CS_PIN -1
+ //#define Y_CS_PIN -1
+ //#define Z_CS_PIN -1
+ //#define X2_CS_PIN -1
+ //#define Y2_CS_PIN -1
+ //#define Z2_CS_PIN -1
+ //#define Z3_CS_PIN -1
+ //#define E0_CS_PIN -1
+ //#define E1_CS_PIN -1
+ //#define E2_CS_PIN -1
+ //#define E3_CS_PIN -1
+ //#define E4_CS_PIN -1
+ //#define E5_CS_PIN -1
+
+ /**
+ * Use software SPI for TMC2130.
+ * The default SW SPI pins are defined the respective pins files,
+ * but you can override or define them here.
+ */
+ //#define TMC_USE_SW_SPI
+ //#define TMC_SW_MOSI -1
+ //#define TMC_SW_MISO -1
+ //#define TMC_SW_SCK -1
+
+ /**
+ * Use Trinamic's ultra quiet stepping mode.
+ * When disabled, Marlin will use spreadCycle stepping mode.
+ */
+ #define STEALTHCHOP_XY
+ #define STEALTHCHOP_Z
+ #define STEALTHCHOP_E
+
+ /**
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
+ */
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
+
+ /**
+ * Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
+ * like overtemperature and short to ground. TMC2208 requires hardware serial.
+ * In the case of overtemperature Marlin can decrease the driver current until error condition clears.
+ * Other detected conditions can be used to stop the current print.
+ * Relevant g-codes:
+ * M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
+ * M911 - Report stepper driver overtemperature pre-warn condition.
+ * M912 - Clear stepper driver overtemperature pre-warn condition flag.
+ * M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
+ */
+ //#define MONITOR_DRIVER_STATUS
+
+ #if ENABLED(MONITOR_DRIVER_STATUS)
+ #define CURRENT_STEP_DOWN 50 // [mA]
+ #define REPORT_CURRENT_CHANGE
+ #define STOP_ON_ERROR
+ #endif
+
+ /**
+ * The driver will switch to spreadCycle when stepper speed is over HYBRID_THRESHOLD.
+ * This mode allows for faster movements at the expense of higher noise levels.
+ * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
+ * M913 X/Y/Z/E to live tune the setting
+ */
+ //#define HYBRID_THRESHOLD
+
+ #define X_HYBRID_THRESHOLD 100 // [mm/s]
+ #define X2_HYBRID_THRESHOLD 100
+ #define Y_HYBRID_THRESHOLD 100
+ #define Y2_HYBRID_THRESHOLD 100
+ #define Z_HYBRID_THRESHOLD 3
+ #define Z2_HYBRID_THRESHOLD 3
+ #define Z3_HYBRID_THRESHOLD 3
+ #define E0_HYBRID_THRESHOLD 30
+ #define E1_HYBRID_THRESHOLD 30
+ #define E2_HYBRID_THRESHOLD 30
+ #define E3_HYBRID_THRESHOLD 30
+ #define E4_HYBRID_THRESHOLD 30
+ #define E5_HYBRID_THRESHOLD 30
+
+ /**
+ * Use StallGuard2 to sense an obstacle and trigger an endstop.
+ * Connect the stepper driver's DIAG1 pin to the X/Y endstop pin.
+ * X, Y, and Z homing will always be done in spreadCycle mode.
+ *
+ * X/Y/Z_STALL_SENSITIVITY is used for tuning the trigger sensitivity.
+ * Higher values make the system LESS sensitive.
+ * Lower value make the system MORE sensitive.
+ * Too low values can lead to false positives, while too high values will collide the axis without triggering.
+ * It is advised to set X/Y/Z_HOME_BUMP_MM to 0.
+ * M914 X/Y/Z to live tune the setting
+ */
+ //#define SENSORLESS_HOMING // TMC2130 only
+
+ /**
+ * Use StallGuard2 to probe the bed with the nozzle.
+ *
+ * CAUTION: This could cause damage to machines that use a lead screw or threaded rod
+ * to move the Z axis. Take extreme care when attempting to enable this feature.
+ */
+ //#define SENSORLESS_PROBING // TMC2130 only
+
+ #if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
+ #define X_STALL_SENSITIVITY 8
+ #define Y_STALL_SENSITIVITY 8
+ //#define Z_STALL_SENSITIVITY 8
+ #endif
+
+ /**
+ * Enable M122 debugging command for TMC stepper drivers.
+ * M122 S0/1 will enable continous reporting.
+ */
+ //#define TMC_DEBUG
+
+ /**
+ * M915 Z Axis Calibration
+ *
+ * - Adjust Z stepper current,
+ * - Drive the Z axis to its physical maximum, and
+ * - Home Z to account for the lost steps.
+ *
+ * Use M915 Snn to specify the current.
+ * Use M925 Znn to add extra Z height to Z_MAX_POS.
+ */
+ //#define TMC_Z_CALIBRATION
+ #if ENABLED(TMC_Z_CALIBRATION)
+ #define CALIBRATION_CURRENT 250
+ #define CALIBRATION_EXTRA_HEIGHT 10
+ #endif
+
+ /**
+ * You can set your own advanced settings by filling in predefined functions.
+ * A list of available functions can be found on the library github page
+ * https://github.com/teemuatlut/TMC2130Stepper
+ * https://github.com/teemuatlut/TMC2208Stepper
+ *
+ * Example:
+ * #define TMC_ADV() { \
+ * stepperX.diag0_temp_prewarn(1); \
+ * stepperY.interpolate(0); \
+ * }
+ */
+ #define TMC_ADV() { }
+
+#endif // HAS_TRINAMIC
+
+// @section L6470
+
+/**
+ * L6470 Stepper Driver options
+ *
+ * The Arduino-L6470 library is required for this stepper driver.
+ * https://github.com/ameyer/Arduino-L6470
+ */
+#if HAS_DRIVER(L6470)
+
+ #define X_MICROSTEPS 16 // number of microsteps
+ #define X_OVERCURRENT 2000 // maxc current in mA. If the current goes over this value, the driver will switch off
+ #define X_STALLCURRENT 1500 // current in mA where the driver will detect a stall
+
+ #define X2_MICROSTEPS 16
+ #define X2_OVERCURRENT 2000
+ #define X2_STALLCURRENT 1500
+
+ #define Y_MICROSTEPS 16
+ #define Y_OVERCURRENT 2000
+ #define Y_STALLCURRENT 1500
+
+ #define Y2_MICROSTEPS 16
+ #define Y2_OVERCURRENT 2000
+ #define Y2_STALLCURRENT 1500
+
+ #define Z_MICROSTEPS 16
+ #define Z_OVERCURRENT 2000
+ #define Z_STALLCURRENT 1500
+
+ #define Z2_MICROSTEPS 16
+ #define Z2_OVERCURRENT 2000
+ #define Z2_STALLCURRENT 1500
+
+ #define Z3_MICROSTEPS 16
+ #define Z3_OVERCURRENT 2000
+ #define Z3_STALLCURRENT 1500
+
+ #define E0_MICROSTEPS 16
+ #define E0_OVERCURRENT 2000
+ #define E0_STALLCURRENT 1500
+
+ #define E1_MICROSTEPS 16
+ #define E1_OVERCURRENT 2000
+ #define E1_STALLCURRENT 1500
+
+ #define E2_MICROSTEPS 16
+ #define E2_OVERCURRENT 2000
+ #define E2_STALLCURRENT 1500
+
+ #define E3_MICROSTEPS 16
+ #define E3_OVERCURRENT 2000
+ #define E3_STALLCURRENT 1500
+
+ #define E4_MICROSTEPS 16
+ #define E4_OVERCURRENT 2000
+ #define E4_STALLCURRENT 1500
+
+ #define E5_MICROSTEPS 16
+ #define E5_OVERCURRENT 2000
+ #define E5_STALLCURRENT 1500
+
+#endif // L6470
+
+/**
+ * TWI/I2C BUS
+ *
+ * This feature is an EXPERIMENTAL feature so it shall not be used on production
+ * machines. Enabling this will allow you to send and receive I2C data from slave
+ * devices on the bus.
+ *
+ * ; Example #1
+ * ; This macro send the string "Marlin" to the slave device with address 0x63 (99)
+ * ; It uses multiple M260 commands with one B arg
+ * M260 A99 ; Target slave address
+ * M260 B77 ; M
+ * M260 B97 ; a
+ * M260 B114 ; r
+ * M260 B108 ; l
+ * M260 B105 ; i
+ * M260 B110 ; n
+ * M260 S1 ; Send the current buffer
+ *
+ * ; Example #2
+ * ; Request 6 bytes from slave device with address 0x63 (99)
+ * M261 A99 B5
+ *
+ * ; Example #3
+ * ; Example serial output of a M261 request
+ * echo:i2c-reply: from:99 bytes:5 data:hello
+ */
+
+// @section i2cbus
+
+//#define EXPERIMENTAL_I2CBUS
+#define I2C_SLAVE_ADDRESS 0 // Set a value from 8 to 127 to act as a slave
+
+// @section extras
+
+/**
+ * Canon Hack Development Kit
+ * http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+ */
+//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
+#if PIN_EXISTS(CHDK)
+ #define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
+#endif
+
+/**
+ * Spindle & Laser control
+ *
+ * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
+ * to set spindle speed, spindle direction, and laser power.
+ *
+ * SuperPid is a router/spindle speed controller used in the CNC milling community.
+ * Marlin can be used to turn the spindle on and off. It can also be used to set
+ * the spindle speed from 5,000 to 30,000 RPM.
+ *
+ * You'll need to select a pin for the ON/OFF function and optionally choose a 0-5V
+ * hardware PWM pin for the speed control and a pin for the rotation direction.
+ *
+ * See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
+ */
+//#define SPINDLE_LASER_ENABLE
+#if ENABLED(SPINDLE_LASER_ENABLE)
+
+ #define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed
+ #define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power
+ #define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower
+ #define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power
+ #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop
+ #define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction
+ #define SPINDLE_INVERT_DIR false
+ #define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction
+
+ /**
+ * The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
+ *
+ * SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+ * where PWM duty cycle varies from 0 to 255
+ *
+ * set the following for your controller (ALL MUST BE SET)
+ */
+
+ #define SPEED_POWER_SLOPE 118.4
+ #define SPEED_POWER_INTERCEPT 0
+ #define SPEED_POWER_MIN 5000
+ #define SPEED_POWER_MAX 30000 // SuperPID router controller 0 - 30,000 RPM
+
+ //#define SPEED_POWER_SLOPE 0.3922
+ //#define SPEED_POWER_INTERCEPT 0
+ //#define SPEED_POWER_MIN 10
+ //#define SPEED_POWER_MAX 100 // 0-100%
+#endif
+
+/**
+ * Filament Width Sensor
+ *
+ * Measures the filament width in real-time and adjusts
+ * flow rate to compensate for any irregularities.
+ *
+ * Also allows the measured filament diameter to set the
+ * extrusion rate, so the slicer only has to specify the
+ * volume.
+ *
+ * Only a single extruder is supported at this time.
+ *
+ * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
+ * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
+ * 301 RAMBO : Analog input 3
+ *
+ * Note: May require analog pins to be defined for other boards.
+ */
+//#define FILAMENT_WIDTH_SENSOR
+
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+ #define FILAMENT_SENSOR_EXTRUDER_NUM 0 // Index of the extruder that has the filament sensor. :[0,1,2,3,4]
+ #define MEASUREMENT_DELAY_CM 14 // (cm) The distance from the filament sensor to the melting chamber
+
+ #define FILWIDTH_ERROR_MARGIN 1.0 // (mm) If a measurement differs too much from nominal width ignore it
+ #define MAX_MEASUREMENT_DELAY 20 // (bytes) Buffer size for stored measurements (1 byte per cm). Must be larger than MEASUREMENT_DELAY_CM.
+
+ #define DEFAULT_MEASURED_FILAMENT_DIA DEFAULT_NOMINAL_FILAMENT_DIA // Set measured to nominal initially
+
+ // Display filament width on the LCD status line. Status messages will expire after 5 seconds.
+ //#define FILAMENT_LCD_DISPLAY
+#endif
+
+/**
+ * CNC Coordinate Systems
+ *
+ * Enables G53 and G54-G59.3 commands to select coordinate systems
+ * and G92.1 to reset the workspace to native machine space.
+ */
+//#define CNC_COORDINATE_SYSTEMS
+
+/**
+ * M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
+ */
+//#define PINS_DEBUGGING
+
+/**
+ * Auto-report temperatures with M155 S
+ */
+#define AUTO_REPORT_TEMPERATURES
+
+/**
+ * Include capabilities in M115 output
+ */
+#define EXTENDED_CAPABILITIES_REPORT
+
+/**
+ * Disable all Volumetric extrusion options
+ */
+//#define NO_VOLUMETRICS
+
+#if DISABLED(NO_VOLUMETRICS)
+ /**
+ * Volumetric extrusion default state
+ * Activate to make volumetric extrusion the default method,
+ * with DEFAULT_NOMINAL_FILAMENT_DIA as the default diameter.
+ *
+ * M200 D0 to disable, M200 Dn to set a new diameter.
+ */
+ //#define VOLUMETRIC_DEFAULT_ON
+#endif
+
+/**
+ * Enable this option for a leaner build of Marlin that removes all
+ * workspace offsets, simplifying coordinate transformations, leveling, etc.
+ *
+ * - M206 and M428 are disabled.
+ * - G92 will revert to its behavior from Marlin 1.0.
+ */
+//#define NO_WORKSPACE_OFFSETS
+
+/**
+ * Set the number of proportional font spaces required to fill up a typical character space.
+ * This can help to better align the output of commands like `G29 O` Mesh Output.
+ *
+ * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
+ * Otherwise, adjust according to your client and font.
+ */
+#define PROPORTIONAL_FONT_RATIO 1.0
+
+/**
+ * Spend 28 bytes of SRAM to optimize the GCode parser
+ */
+#define FASTER_GCODE_PARSER
+
+/**
+ * CNC G-code options
+ * Support CNC-style G-code dialects used by laser cutters, drawing machine cams, etc.
+ * Note that G0 feedrates should be used with care for 3D printing (if used at all).
+ * High feedrates may cause ringing and harm print quality.
+ */
+//#define PAREN_COMMENTS // Support for parentheses-delimited comments
+//#define GCODE_MOTION_MODES // Remember the motion mode (G0 G1 G2 G3 G5 G38.X) and apply for X Y Z E F, etc.
+
+// Enable and set a (default) feedrate for all G0 moves
+//#define G0_FEEDRATE 3000 // (mm/m)
+#ifdef G0_FEEDRATE
+ //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
+#endif
+
+/**
+ * G-code Macros
+ *
+ * Add G-codes M810-M819 to define and run G-code macros.
+ * Macros are not saved to EEPROM.
+ */
+//#define GCODE_MACROS
+#if ENABLED(GCODE_MACROS)
+ #define GCODE_MACROS_SLOTS 5 // Up to 10 may be used
+ #define GCODE_MACROS_SLOT_SIZE 50 // Maximum length of a single macro
+#endif
+
+/**
+ * User-defined menu items that execute custom GCode
+ */
+//#define CUSTOM_USER_MENUS
+#if ENABLED(CUSTOM_USER_MENUS)
+ //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
+ #define USER_SCRIPT_DONE "M117 User Script Done"
+ #define USER_SCRIPT_AUDIBLE_FEEDBACK
+ //#define USER_SCRIPT_RETURN // Return to status screen after a script
+
+ #define USER_DESC_1 "Home & UBL Info"
+ #define USER_GCODE_1 "G28\nG29 W"
+
+ #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
+ #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+
+ #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
+ #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+
+ #define USER_DESC_4 "Heat Bed/Home/Level"
+ #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+
+ #define USER_DESC_5 "Home & Info"
+ #define USER_GCODE_5 "G28\nM503"
+#endif
+
+/**
+ * Specify an action command to send to the host when the printer is killed.
+ * Will be sent in the form '//action:ACTION_ON_KILL', e.g. '//action:poweroff'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_KILL "poweroff"
+
+/**
+ * Specify an action command to send to the host on pause and resume.
+ * Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
+ * The host must be configured to handle the action command.
+ */
+//#define ACTION_ON_PAUSE "pause"
+//#define ACTION_ON_RESUME "resume"
+
+//===========================================================================
+//====================== I2C Position Encoder Settings ======================
+//===========================================================================
+
+/**
+ * I2C position encoders for closed loop control.
+ * Developed by Chris Barr at Aus3D.
+ *
+ * Wiki: http://wiki.aus3d.com.au/Magnetic_Encoder
+ * Github: https://github.com/Aus3D/MagneticEncoder
+ *
+ * Supplier: http://aus3d.com.au/magnetic-encoder-module
+ * Alternative Supplier: http://reliabuild3d.com/
+ *
+ * Reilabuild encoders have been modified to improve reliability.
+ */
+
+//#define I2C_POSITION_ENCODERS
+#if ENABLED(I2C_POSITION_ENCODERS)
+
+ #define I2CPE_ENCODER_CNT 1 // The number of encoders installed; max of 5
+ // encoders supported currently.
+
+ #define I2CPE_ENC_1_ADDR I2CPE_PRESET_ADDR_X // I2C address of the encoder. 30-200.
+ #define I2CPE_ENC_1_AXIS X_AXIS // Axis the encoder module is installed on. _AXIS.
+ #define I2CPE_ENC_1_TYPE I2CPE_ENC_TYPE_LINEAR // Type of encoder: I2CPE_ENC_TYPE_LINEAR -or-
+ // I2CPE_ENC_TYPE_ROTARY.
+ #define I2CPE_ENC_1_TICKS_UNIT 2048 // 1024 for magnetic strips with 2mm poles; 2048 for
+ // 1mm poles. For linear encoders this is ticks / mm,
+ // for rotary encoders this is ticks / revolution.
+ //#define I2CPE_ENC_1_TICKS_REV (16 * 200) // Only needed for rotary encoders; number of stepper
+ // steps per full revolution (motor steps/rev * microstepping)
+ //#define I2CPE_ENC_1_INVERT // Invert the direction of axis travel.
+ #define I2CPE_ENC_1_EC_METHOD I2CPE_ECM_MICROSTEP // Type of error error correction.
+ #define I2CPE_ENC_1_EC_THRESH 0.10 // Threshold size for error (in mm) above which the
+ // printer will attempt to correct the error; errors
+ // smaller than this are ignored to minimize effects of
+ // measurement noise / latency (filter).
+
+ #define I2CPE_ENC_2_ADDR I2CPE_PRESET_ADDR_Y // Same as above, but for encoder 2.
+ #define I2CPE_ENC_2_AXIS Y_AXIS
+ #define I2CPE_ENC_2_TYPE I2CPE_ENC_TYPE_LINEAR
+ #define I2CPE_ENC_2_TICKS_UNIT 2048
+ //#define I2CPE_ENC_2_TICKS_REV (16 * 200)
+ //#define I2CPE_ENC_2_INVERT
+ #define I2CPE_ENC_2_EC_METHOD I2CPE_ECM_MICROSTEP
+ #define I2CPE_ENC_2_EC_THRESH 0.10
+
+ #define I2CPE_ENC_3_ADDR I2CPE_PRESET_ADDR_Z // Encoder 3. Add additional configuration options
+ #define I2CPE_ENC_3_AXIS Z_AXIS // as above, or use defaults below.
+
+ #define I2CPE_ENC_4_ADDR I2CPE_PRESET_ADDR_E // Encoder 4.
+ #define I2CPE_ENC_4_AXIS E_AXIS
+
+ #define I2CPE_ENC_5_ADDR 34 // Encoder 5.
+ #define I2CPE_ENC_5_AXIS E_AXIS
+
+ // Default settings for encoders which are enabled, but without settings configured above.
+ #define I2CPE_DEF_TYPE I2CPE_ENC_TYPE_LINEAR
+ #define I2CPE_DEF_ENC_TICKS_UNIT 2048
+ #define I2CPE_DEF_TICKS_REV (16 * 200)
+ #define I2CPE_DEF_EC_METHOD I2CPE_ECM_NONE
+ #define I2CPE_DEF_EC_THRESH 0.1
+
+ //#define I2CPE_ERR_THRESH_ABORT 100.0 // Threshold size for error (in mm) error on any given
+ // axis after which the printer will abort. Comment out to
+ // disable abort behaviour.
+
+ #define I2CPE_TIME_TRUSTED 10000 // After an encoder fault, there must be no further fault
+ // for this amount of time (in ms) before the encoder
+ // is trusted again.
+
+ /**
+ * Position is checked every time a new command is executed from the buffer but during long moves,
+ * this setting determines the minimum update time between checks. A value of 100 works well with
+ * error rolling average when attempting to correct only for skips and not for vibration.
+ */
+ #define I2CPE_MIN_UPD_TIME_MS 4 // (ms) Minimum time between encoder checks.
+
+ // Use a rolling average to identify persistant errors that indicate skips, as opposed to vibration and noise.
+ #define I2CPE_ERR_ROLLING_AVERAGE
+
+#endif // I2C_POSITION_ENCODERS
+
+/**
+ * MAX7219 Debug Matrix
+ *
+ * Add support for a low-cost 8x8 LED Matrix based on the Max7219 chip as a realtime status display.
+ * Requires 3 signal wires. Some useful debug options are included to demonstrate its usage.
+ */
+//#define MAX7219_DEBUG
+#if ENABLED(MAX7219_DEBUG)
+ #define MAX7219_CLK_PIN 64
+ #define MAX7219_DIN_PIN 57
+ #define MAX7219_LOAD_PIN 44
+
+ //#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
+ #define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
+ #define MAX7219_NUMBER_UNITS 1 // Number of Max7219 units in chain.
+ #define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
+ // connector at: right=0 bottom=-90 top=90 left=180
+ //#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
+
+ /**
+ * Sample debug features
+ * If you add more debug displays, be careful to avoid conflicts!
+ */
+ #define MAX7219_DEBUG_PRINTER_ALIVE // Blink corner LED of 8x8 matrix to show that the firmware is functioning
+ #define MAX7219_DEBUG_PLANNER_HEAD 3 // Show the planner queue head position on this and the next LED matrix row
+ #define MAX7219_DEBUG_PLANNER_TAIL 5 // Show the planner queue tail position on this and the next LED matrix row
+
+ #define MAX7219_DEBUG_PLANNER_QUEUE 0 // Show the current planner queue depth on this and the next LED matrix row
+ // If you experience stuttering, reboots, etc. this option can reveal how
+ // tweaks made to the configuration are affecting the printer in real-time.
+#endif
+
+/**
+ * NanoDLP Sync support
+ *
+ * Add support for Synchronized Z moves when using with NanoDLP. G0/G1 axis moves will output "Z_move_comp"
+ * string to enable synchronization with DLP projector exposure. This change will allow to use
+ * [[WaitForDoneMessage]] instead of populating your gcode with M400 commands
+ */
+//#define NANODLP_Z_SYNC
+#if ENABLED(NANODLP_Z_SYNC)
+ //#define NANODLP_ALL_AXIS // Enables "Z_move_comp" output on any axis move.
+ // Default behaviour is limited to Z axis only.
+#endif
+
+/**
+ * WiFi Support (Espressif ESP32 WiFi)
+ */
+//#define WIFISUPPORT
+#if ENABLED(WIFISUPPORT)
+ #define WIFI_SSID "Wifi SSID"
+ #define WIFI_PWD "Wifi Password"
+#endif
+
+// Enable Marlin dev mode which adds some special commands
+//#define MARLIN_DEV_MODE
diff --git a/Marlin/src/config/examples/VORONDesign/_Bootscreen.h b/Marlin/src/config/examples/VORONDesign/_Bootscreen.h
new file mode 100644
index 0000000000..bce4b0d4c4
--- /dev/null
+++ b/Marlin/src/config/examples/VORONDesign/_Bootscreen.h
@@ -0,0 +1,81 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Made with Marlin Bitmap Converter
+ * http://marlinfw.org/tools/u8glib/converter.html
+ */
+
+#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
+
+const unsigned char custom_start_bmp[] PROGMEM = {
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000001,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00011111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000011,B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00001111,B11111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00111111,B11111110,B00111111,B00011111,B11110011,B10000000,B00011100,B00111111,B11110000,B00111111,B11111000,B00000111,B11111110,B00000111,B10000000,B00110000,
+ B00111111,B11111100,B01111110,B00111111,B11110011,B10000000,B00011100,B01111111,B11111100,B00111111,B11111100,B00001111,B11111111,B10000111,B11000000,B00110000,
+ B00111111,B11111100,B11111100,B01111111,B11110001,B11000000,B00011100,B11110000,B00011100,B00111000,B00011110,B00011110,B00000011,B10000111,B11100000,B00110000,
+ B00111111,B11111000,B11111100,B01111111,B11110001,B11000000,B00111000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B11100000,B00110000,
+ B00111111,B11110001,B11111000,B11111111,B11110001,B11000000,B00111000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B01110000,B00110000,
+ B00111111,B11110011,B11111001,B11111111,B11110000,B11100000,B00110000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B01111000,B00110000,
+ B00111111,B11100011,B11110001,B11111111,B11110000,B11100000,B01110000,B11100000,B00001110,B00111000,B00001110,B00011100,B00000001,B11000111,B00111000,B00110000,
+ B00111111,B11000111,B11100011,B11111111,B11110000,B01110000,B01110000,B11100000,B00001110,B00111000,B00011110,B00011100,B00000001,B11000111,B00011100,B00110000,
+ B00111111,B11001111,B11100111,B11111111,B11110000,B01110000,B11100000,B11100000,B00001110,B00111111,B11111100,B00011100,B00000001,B11000111,B00011110,B00110000,
+ B00111111,B11111111,B11000111,B11111111,B11110000,B01110000,B11100000,B11100000,B00001110,B00111111,B11110000,B00011100,B00000001,B11000111,B00001110,B00110000,
+ B00111111,B11111111,B10001111,B11111111,B11110000,B00111000,B11000000,B11100000,B00001110,B00111000,B11100000,B00011100,B00000001,B11000111,B00001111,B00110000,
+ B00111111,B11111111,B10011111,B11001111,B11110000,B00111001,B11000000,B11100000,B00001110,B00111000,B11110000,B00011100,B00000001,B11000111,B00000111,B00110000,
+ B00111111,B11111111,B00011111,B10001111,B11110000,B00111001,B11000000,B11100000,B00001110,B00111000,B01111000,B00011100,B00000001,B11000111,B00000011,B10110000,
+ B00111111,B11111110,B00111111,B00011111,B11110000,B00011101,B10000000,B11100000,B00001110,B00111000,B00111000,B00011100,B00000001,B11000111,B00000011,B11110000,
+ B00111111,B11111110,B01111111,B00111111,B11110000,B00011111,B10000000,B11110000,B00011110,B00111000,B00011100,B00011110,B00000011,B10000111,B00000001,B11110000,
+ B00111111,B11111100,B01111110,B00111111,B11110000,B00001111,B00000000,B01111110,B11111100,B00111000,B00011110,B00001111,B10011111,B10000111,B00000000,B11110000,
+ B00111111,B11111000,B11111100,B01111111,B11110000,B00001111,B00000000,B00111111,B11111000,B00111000,B00001110,B00000111,B11111111,B00000111,B00000000,B11110000,
+ B00111111,B11111001,B11111100,B11111111,B11110000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,B11111000,B00000000,B00000000,B00000000,
+ B00111111,B11110001,B11111000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00011111,B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00001111,B11111111,B11111111,B11111111,B11000011,B11110000,B00000001,B11110000,B00000000,B11110000,B00000000,B01100000,B00000001,B11110000,B00000011,B00010000,
+ B00000011,B11111111,B11111111,B11111111,B10000011,B00111000,B00000001,B10000000,B00000001,B10000000,B00000000,B01100000,B00000011,B00000000,B00000011,B00011000,
+ B00000000,B11111111,B11111111,B11111110,B00000011,B00011000,B00000001,B00000000,B00000001,B00000000,B00000000,B01100000,B00000010,B00000000,B00000011,B10011000,
+ B00000000,B01111111,B11111111,B11111000,B00000011,B00011000,B00000001,B11100000,B00000001,B11100000,B00000000,B01100000,B00000010,B01110000,B00000010,B11011000,
+ B00000000,B00011111,B11111111,B11110000,B00000011,B00011000,B00000001,B11100000,B00000000,B11110000,B00000000,B01100000,B00000010,B01110000,B00000010,B11011000,
+ B00000000,B00000111,B11111111,B11000000,B00000011,B00011000,B00000001,B00000000,B00000000,B00011000,B00000000,B01100000,B00000010,B00010000,B00000010,B01111000,
+ B00000000,B00000011,B11111111,B00000000,B00000011,B00011000,B00000001,B00000000,B00000000,B00010000,B00000000,B01100000,B00000010,B00010000,B00000010,B00111000,
+ B00000000,B00000000,B11111100,B00000000,B00000011,B11110000,B00000001,B11110000,B00000001,B11110000,B00000000,B01100000,B00000011,B11110000,B00000010,B00111000,
+ B00000000,B00000000,B00111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
+ B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
+};
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration.h b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
index c3fca23690..d35442c261 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration.h
@@ -325,6 +325,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -344,7 +345,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -697,6 +698,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -705,10 +714,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1896,6 +1908,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
index dc6c928369..5ed2b9a70e 100644
--- a/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8200/Configuration_adv.h
@@ -495,14 +495,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -617,6 +609,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1401,10 +1400,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
index 6cf4f7e7a6..e400c389c1 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.5
-#define DEFAULT_EJERK 20.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.5
+#endif
+
+#define DEFAULT_EJERK 20.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
index d1134eb22b..e1639a5ae8 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
index 739e471d23..a9721054cf 100644
--- a/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
+++ b/Marlin/src/config/examples/Velleman/K8400/Dual-head/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 5
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 6000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.4
-#define DEFAULT_EJERK 20.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
index 25e2d9d38b..f834dc932d 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 20
#define TEMP_SENSOR_1 0
@@ -678,6 +679,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -686,10 +695,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 1.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 1.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1874,6 +1886,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
index fc73aa165a..c176258f98 100644
--- a/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
+++ b/Marlin/src/config/examples/Wanhao/Duplicator 6/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
index 04fdb12aea..e2827b7513 100644
--- a/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
+++ b/Marlin/src/config/examples/adafruit/ST7565/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -668,6 +669,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -676,10 +685,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1861,6 +1873,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
index 0ea7ceb99c..a4d11d46ed 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration.h
@@ -320,6 +320,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -339,7 +340,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -798,6 +799,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -806,10 +815,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 5.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK DEFAULT_XJERK
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 5.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -2051,6 +2063,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
index 8c6a775706..3de12b0e1b 100644
--- a/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Anycubic/Kossel/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
index 2f56f23a18..bd0293a20e 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -750,6 +751,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -758,10 +767,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1989,6 +2001,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
index e6173d8ca2..b184660ef6 100644
--- a/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/auto_calibrate/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
index c8a438c650..5cec8860a7 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -750,6 +751,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -758,10 +767,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1988,6 +2000,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
index e6173d8ca2..b184660ef6 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
index a914aed0e2..0d7e928cb2 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -750,6 +751,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -758,10 +767,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1988,6 +2000,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
index 5dc8f44bb0..a2c7c4fc20 100644
--- a/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/FLSUN/kossel_mini/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h
index 985002800c..740cdb1001 100644
--- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h
+++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration.h
@@ -316,6 +316,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -335,7 +336,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -751,6 +752,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -759,10 +768,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1990,6 +2002,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
index 492af30f92..f70c70c1c4 100644
--- a/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Geeetech/Rostock 301/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1363,10 +1362,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
index 7a6ab0c866..c95f970379 100644
--- a/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
+++ b/Marlin/src/config/examples/delta/Hatchbox_Alpha/Configuration.h
@@ -310,6 +310,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -329,7 +330,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -755,6 +756,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -763,10 +772,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 20.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 20.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1991,6 +2003,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h
index 8ef8fcf2be..6f4b1dc010 100644
--- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h
+++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 0
@@ -740,6 +741,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -748,10 +757,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1976,6 +1988,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
index 8bdd58de4f..40e03fdaaf 100644
--- a/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/MKS/SBASE/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h
index f63d967cbf..5a2d09de91 100644
--- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h
+++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -744,6 +745,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 5000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -752,10 +761,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1980,6 +1992,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
index f0282d0150..c69a3d3cc1 100644
--- a/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/Tevo Little Monster/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/generic/Configuration.h b/Marlin/src/config/examples/delta/generic/Configuration.h
index abc5872b39..0afc8f099e 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 -1
#define TEMP_SENSOR_1 0
@@ -740,6 +741,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -748,10 +757,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1976,6 +1988,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/generic/Configuration_adv.h b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
index 5dc8f44bb0..a2c7c4fc20 100644
--- a/Marlin/src/config/examples/delta/generic/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/generic/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
index 1b54c265eb..ac4c9e0685 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 7
#define TEMP_SENSOR_1 0
@@ -740,6 +741,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -748,10 +757,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1978,6 +1990,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
index 5dc8f44bb0..a2c7c4fc20 100644
--- a/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_mini/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
index 808570ba86..212d607aec 100644
--- a/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_pro/Configuration.h
@@ -309,6 +309,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -328,7 +329,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -733,6 +734,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -741,10 +750,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1979,6 +1991,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
index 22eb1ac7f8..52b08dea6d 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -743,6 +744,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -751,10 +760,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK DEFAULT_XJERK
-#define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
-#define DEFAULT_EJERK 20.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK DEFAULT_XJERK
+ #define DEFAULT_ZJERK DEFAULT_XJERK // Must be same as XY for delta
+#endif
+
+#define DEFAULT_EJERK 20.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1979,6 +1991,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
index aa0628e470..881442de67 100644
--- a/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
+++ b/Marlin/src/config/examples/delta/kossel_xl/Configuration_adv.h
@@ -484,14 +484,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -606,6 +598,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1390,10 +1389,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
index d92be020a6..ef68bfac32 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration.h
@@ -310,6 +310,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -329,7 +330,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -681,6 +682,14 @@
#define DEFAULT_RETRACT_ACCELERATION 400 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 400 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -689,10 +698,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.5
-#define DEFAULT_YJERK 8.5
-#define DEFAULT_ZJERK 0.7
-#define DEFAULT_EJERK 4.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.5
+ #define DEFAULT_YJERK 8.5
+ #define DEFAULT_ZJERK 0.7
+#endif
+
+#define DEFAULT_EJERK 4.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1875,6 +1887,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
index c071fad066..e1f157b16c 100644
--- a/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
+++ b/Marlin/src/config/examples/gCreate/gMax1.5+/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/makibox/Configuration.h b/Marlin/src/config/examples/makibox/Configuration.h
index 4c16affea2..674ad33825 100644
--- a/Marlin/src/config/examples/makibox/Configuration.h
+++ b/Marlin/src/config/examples/makibox/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 1
#define TEMP_SENSOR_1 0
@@ -671,6 +672,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -679,10 +688,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1864,6 +1876,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/makibox/Configuration_adv.h b/Marlin/src/config/examples/makibox/Configuration_adv.h
index 6f84aebd47..765e99e417 100644
--- a/Marlin/src/config/examples/makibox/Configuration_adv.h
+++ b/Marlin/src/config/examples/makibox/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/stm32f103ret6/Configuration.h b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
index 5a564e5fa7..cd897f062d 100644
--- a/Marlin/src/config/examples/stm32f103ret6/Configuration.h
+++ b/Marlin/src/config/examples/stm32f103ret6/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#warning temp_sensor set to 998/999 (fake)
#define TEMP_SENSOR_0 999
@@ -670,6 +671,14 @@
#define DEFAULT_RETRACT_ACCELERATION 5000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -678,10 +687,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 13.0
-#define DEFAULT_YJERK 13.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 13.0
+ #define DEFAULT_YJERK 13.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1863,6 +1875,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
index 4a0c665bc2..39778186b6 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 5
#define TEMP_SENSOR_1 0
@@ -663,6 +664,14 @@
#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 500 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -671,10 +680,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 10.0
-#define DEFAULT_YJERK 10.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 10.0
+ #define DEFAULT_YJERK 10.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1856,6 +1868,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
index 2774e981d9..53adde2210 100644
--- a/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
+++ b/Marlin/src/config/examples/tvrrug/Round2/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -604,6 +596,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
//#define LCD_INFO_MENU
@@ -1388,10 +1387,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/config/examples/wt150/Configuration.h b/Marlin/src/config/examples/wt150/Configuration.h
index 2303bb25ec..92d0a05b4c 100644
--- a/Marlin/src/config/examples/wt150/Configuration.h
+++ b/Marlin/src/config/examples/wt150/Configuration.h
@@ -305,6 +305,7 @@
* 15 : 100k thermistor calibration for JGAurora A5 hotend
* 20 : the PT100 circuit found in the Ultimainboard V2.x
* 60 : 100k Maker's Tool Works Kapton Bed Thermistor beta=3950
+ * 61 : 100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup
* 66 : 4.7M High Temperature thermistor from Dyze Design
* 70 : the 100K thermistor found in the bq Hephestos 2
* 75 : 100k Generic Silicon Heat Pad with NTC 100K MGB18-104F39050L32 thermistor
@@ -324,7 +325,7 @@
* 998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
* 999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
*
- * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
+ * :{ '0': "Not used", '1':"100k / 4.7k - EPCOS", '2':"200k / 4.7k - ATC Semitec 204GT-2", '3':"Mendel-parts / 4.7k", '4':"10k !! do not use for a hotend. Bad resolution at high temp. !!", '5':"100K / 4.7k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '501':"100K Zonestar (Tronxy X3A)", '6':"100k / 4.7k EPCOS - Not as accurate as Table 1", '7':"100k / 4.7k Honeywell 135-104LAG-J01", '8':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT", '9':"100k / 4.7k GE Sensing AL03006-58.2K-97-G1", '10':"100k / 4.7k RS 198-961", '11':"100k / 4.7k beta 3950 1%", '12':"100k / 4.7k 0603 SMD Vishay NTCS0603E3104FXT (calibrated for Makibox hot bed)", '13':"100k Hisens 3950 1% up to 300°C for hotend 'Simple ONE ' & hotend 'All In ONE'", '20':"PT100 (Ultimainboard V2.x)", '51':"100k / 1k - EPCOS", '52':"200k / 1k - ATC Semitec 204GT-2", '55':"100k / 1k - ATC Semitec 104GT-2 (Used in ParCan & J-Head)", '60':"100k Maker's Tool Works Kapton Bed Thermistor beta=3950", '61':"100k Formbot / Vivedino 3950 350C thermistor 4.7k pullup", '66':"Dyze Design 4.7M High Temperature thermistor", '70':"the 100K thermistor found in the bq Hephestos 2", '71':"100k / 4.7k Honeywell 135-104LAF-J01", '147':"Pt100 / 4.7k", '1047':"Pt1000 / 4.7k", '110':"Pt100 / 1k (non-standard)", '1010':"Pt1000 / 1k (non standard)", '-4':"Thermocouple + AD8495", '-3':"Thermocouple + MAX31855 (only for sensor 0)", '-2':"Thermocouple + MAX6675 (only for sensor 0)", '-1':"Thermocouple + AD595",'998':"Dummy 1", '999':"Dummy 2" }
*/
#define TEMP_SENSOR_0 -2
#define TEMP_SENSOR_1 0
@@ -673,6 +674,14 @@
#define DEFAULT_RETRACT_ACCELERATION 1200 // E acceleration for retracts
#define DEFAULT_TRAVEL_ACCELERATION 1200 // X, Y, Z acceleration for travel (non printing) moves
+//
+// Use Junction Deviation instead of traditional Jerk Limiting
+//
+//#define JUNCTION_DEVIATION
+#if ENABLED(JUNCTION_DEVIATION)
+ #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
+#endif
+
/**
* Default Jerk (mm/s)
* Override with M205 X Y Z E
@@ -681,10 +690,13 @@
* When changing speed and direction, if the difference is less than the
* value set here, it may happen instantaneously.
*/
-#define DEFAULT_XJERK 8.0
-#define DEFAULT_YJERK 8.0
-#define DEFAULT_ZJERK 0.3
-#define DEFAULT_EJERK 5.0
+#if DISABLED(JUNCTION_DEVIATION)
+ #define DEFAULT_XJERK 8.0
+ #define DEFAULT_YJERK 8.0
+ #define DEFAULT_ZJERK 0.3
+#endif
+
+#define DEFAULT_EJERK 5.0 // May be used by Linear Advance
/**
* S-Curve Acceleration
@@ -1866,6 +1878,15 @@
//
//#define EXTENSIBLE_UI
+//=============================================================================
+//=============================== Graphical TFTs ==============================
+//=============================================================================
+
+//
+// MKS Robin 320x240 color display
+//
+//#define MKS_ROBIN_TFT
+
//=============================================================================
//============================ Other Controllers ============================
//=============================================================================
diff --git a/Marlin/src/config/examples/wt150/Configuration_adv.h b/Marlin/src/config/examples/wt150/Configuration_adv.h
index e523848eaf..a558e51694 100644
--- a/Marlin/src/config/examples/wt150/Configuration_adv.h
+++ b/Marlin/src/config/examples/wt150/Configuration_adv.h
@@ -482,14 +482,6 @@
// if unwanted behavior is observed on a user's machine when running at very slow speeds.
#define MINIMUM_PLANNER_SPEED 0.05 // (mm/s)
-//
-// Use Junction Deviation instead of traditional Jerk Limiting
-//
-//#define JUNCTION_DEVIATION
-#if ENABLED(JUNCTION_DEVIATION)
- #define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
-#endif
-
//
// Backlash Compensation
// Adds extra movement to axes on direction-changes to account for backlash.
@@ -605,6 +597,13 @@
#define ENCODER_100X_STEPS_PER_SEC 80 // (steps/s) Encoder rate for 100x speed
#endif
+// Play a beep when the feedrate is changed from the Status Screen
+//#define BEEP_ON_FEEDRATE_CHANGE
+#if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ #define FEEDRATE_CHANGE_BEEP_DURATION 10
+ #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
+#endif
+
// Include a page of printer information in the LCD Main Menu
#define LCD_INFO_MENU
@@ -1389,10 +1388,20 @@
#define STEALTHCHOP_E
/**
- * Adjust spreadCycle chopper parameters with the help of an example included in the library.
- * The parameters are off time, hysteresis end and hysteresis start.
+ * Optimize spreadCycle chopper parameters by using predefined parameter sets
+ * or with the help of an example included in the library.
+ * Provided parameter sets are
+ * CHOPPER_DEFAULT_12V
+ * CHOPPER_DEFAULT_19V
+ * CHOPPER_DEFAULT_24V
+ * CHOPPER_DEFAULT_36V
+ * CHOPPER_PRUSAMK3_24V // Imported parameters from the official Prusa firmware for MK3 (24V)
+ * CHOPPER_MARLIN_119 // Old defaults from Marlin v1.1.9
+ *
+ * Define you own with
+ * { , , hysteresis_start[1..8] }
*/
- #define CHOPPER_TIMING { 4, -2, 1 }
+ #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
/**
* Monitor Trinamic TMC2130 and TMC2208 drivers for error conditions,
diff --git a/Marlin/src/core/boards.h b/Marlin/src/core/boards.h
index 575bf26539..0617d286b1 100644
--- a/Marlin/src/core/boards.h
+++ b/Marlin/src/core/boards.h
@@ -57,6 +57,7 @@
#define BOARD_BAM_DICE 401 // 2PrintBeta BAM&DICE with STK drivers
#define BOARD_BAM_DICE_DUE 402 // 2PrintBeta BAM&DICE Due with STK drivers
#define BOARD_MKS_BASE 40 // MKS BASE v1.0
+#define BOARD_MKS_BASE_14 404 // MKS v1.4 A4982 stepper drivers
#define BOARD_MKS_BASE_15 405 // MKS v1.5 with Allegro A4982 stepper drivers
#define BOARD_MKS_BASE_HEROIC 41 // MKS BASE 1.0 with Heroic HR4982 stepper drivers
#define BOARD_MKS_GEN_13 47 // MKS GEN v1.3 or 1.4
@@ -85,6 +86,8 @@
#define BOARD_RAMPS_ENDER_4 243 // Creality: Ender-4, CR-8
#define BOARD_RAMPS_CREALITY 244 // Creality: CR10S, CR20, CR-X
#define BOARD_FYSETC_F6_13 541 // Fysetc F6
+#define BOARD_DUPLICATOR_I3_PLUS 31 // Wanhao Duplicator i3 Plus
+#define BOARD_VORON 441 // VORON Design
//
// Other ATmega1280, ATmega2560
@@ -99,6 +102,7 @@
#define BOARD_MEGATRONICS_2 701 // Megatronics v2.0
#define BOARD_MEGATRONICS_3 703 // Megatronics v3.0
#define BOARD_MEGATRONICS_31 704 // Megatronics v3.1
+#define BOARD_MEGATRONICS_32 705 // Megatronics v3.2
#define BOARD_RAMBO 301 // Rambo
#define BOARD_MINIRAMBO 302 // Mini-Rambo
#define BOARD_MINIRAMBO_10A 303 // Mini-Rambo 1.0a
@@ -183,6 +187,8 @@
#define BOARD_COHESION3D_MINI 1756 // Cohesion3D Mini
#define BOARD_SMOOTHIEBOARD 1757 // Smoothieboard
#define BOARD_AZTEEG_X5_MINI_WIFI 1758 // Azteeg X5 Mini (Power outputs: Hotend0, Bed, Fan)
+#define BOARD_BIQU_SKR_V1_1 1759 // BIQU SKR_V1.1 (Power outputs: Hotend0,Hotend1, Fan, Bed)
+#define BOARD_BIQU_B300_V1_0 1760 // BIQU B300_V1.0 (Power outputs: Hotend0, Fan, Bed, SPI Driver)
//
// SAM3X8E ARM Cortex M3
@@ -224,6 +230,7 @@
#define BOARD_STM3R_MINI 1803 // STM32 Libmaple based stm32f1 controller
#define BOARD_GTM32_PRO_VB 1805 // STM32f103VET6 controller
#define BOARD_MORPHEUS 1806 // STM32F103C8/STM32F103CB Libmaple based stm32f1 controller
+#define BOARD_MKS_ROBIN 1808 // MKS Robin / STM32F103ZET6
//
// STM32 ARM Cortex-M4F
diff --git a/Marlin/src/feature/tmc_util.h b/Marlin/src/feature/tmc_util.h
index d9bf8143f6..3acfdc9cbc 100644
--- a/Marlin/src/feature/tmc_util.h
+++ b/Marlin/src/feature/tmc_util.h
@@ -43,6 +43,13 @@
#define TMC_E4_LABEL 'E', '4'
#define TMC_E5_LABEL 'E', '5'
+#define CHOPPER_DEFAULT_12V { 3, -1, 1 }
+#define CHOPPER_DEFAULT_19V { 4, 1, 1 }
+#define CHOPPER_DEFAULT_24V { 4, 2, 1 }
+#define CHOPPER_DEFAULT_36V { 5, 2, 4 }
+#define CHOPPER_PRUSAMK3_24V { 4, 1, 4 }
+#define CHOPPER_MARLIN_119 { 5, 2, 3 }
+
template
class TMCStorage {
protected:
diff --git a/Marlin/src/gcode/bedlevel/M420.cpp b/Marlin/src/gcode/bedlevel/M420.cpp
index 9d287a288b..4e5b6c4a2e 100644
--- a/Marlin/src/gcode/bedlevel/M420.cpp
+++ b/Marlin/src/gcode/bedlevel/M420.cpp
@@ -215,7 +215,9 @@ void GcodeSuite::M420() {
// Enable leveling if specified, or if previously active
set_bed_leveling_enabled(to_enable);
- EXIT_M420:
+ #if HAS_MESH
+ EXIT_M420:
+ #endif
// Error if leveling failed to enable or reenable
if (to_enable && !planner.leveling_active)
diff --git a/Marlin/src/gcode/calibrate/G33.cpp b/Marlin/src/gcode/calibrate/G33.cpp
index 6843b57ec4..db70ddd205 100644
--- a/Marlin/src/gcode/calibrate/G33.cpp
+++ b/Marlin/src/gcode/calibrate/G33.cpp
@@ -140,12 +140,6 @@ static void print_calibration_settings(const bool end_stops, const bool tower_an
if ((!end_stops && tower_angles) || (end_stops && !tower_angles)) { // XOR
SERIAL_ECHOPAIR(" Radius:", delta_radius);
}
- #if HAS_BED_PROBE
- if (!end_stops && !tower_angles) {
- SERIAL_ECHO_SP(30);
- print_signed_float(PSTR("Offset"), zprobe_zoffset);
- }
- #endif
SERIAL_EOL();
}
@@ -194,30 +188,19 @@ static float std_dev_points(float z_pt[NPP + 1], const bool _0p_cal, const bool
/**
* - Probe a point
*/
-static float calibration_probe(const float &nx, const float &ny, const bool stow, const bool set_up) {
+static float calibration_probe(const float &nx, const float &ny, const bool stow) {
#if HAS_BED_PROBE
- return probe_pt(nx, ny, set_up ? PROBE_PT_BIG_RAISE : stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
+ return probe_pt(nx, ny, stow ? PROBE_PT_STOW : PROBE_PT_RAISE, 0, false);
#else
UNUSED(stow);
- UNUSED(set_up);
return lcd_probe_pt(nx, ny);
#endif
}
-#if HAS_BED_PROBE && HAS_LCD_MENU
- static float probe_z_shift(const float center) {
- STOW_PROBE();
- endstops.enable_z_probe(false);
- float z_shift = lcd_probe_pt(0, 0) - center;
- endstops.enable_z_probe(true);
- return z_shift;
- }
-#endif
-
/**
* - Probe a grid
*/
-static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_points, const bool towers_set, const bool stow_after_each, const bool set_up) {
+static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_points, const bool towers_set, const bool stow_after_each) {
const bool _0p_calibration = probe_points == 0,
_1p_calibration = probe_points == 1 || probe_points == -1,
_4p_calibration = probe_points == 2,
@@ -240,7 +223,7 @@ static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_poi
if (!_0p_calibration) {
if (!_7p_no_intermediates && !_7p_4_intermediates && !_7p_11_intermediates) { // probe the center
- z_pt[CEN] += calibration_probe(0, 0, stow_after_each, set_up);
+ z_pt[CEN] += calibration_probe(0, 0, stow_after_each);
if (isnan(z_pt[CEN])) return false;
}
@@ -250,7 +233,7 @@ static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_poi
I_LOOP_CAL_PT(rad, start, steps) {
const float a = RADIANS(210 + (360 / NPP) * (rad - 1)),
r = delta_calibration_radius * 0.1;
- z_pt[CEN] += calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up);
+ z_pt[CEN] += calibration_probe(cos(a) * r, sin(a) * r, stow_after_each);
if (isnan(z_pt[CEN])) return false;
}
z_pt[CEN] /= float(_7p_2_intermediates ? 7 : probe_points);
@@ -274,7 +257,7 @@ static bool probe_calibration_points(float z_pt[NPP + 1], const int8_t probe_poi
const float a = RADIANS(210 + (360 / NPP) * (rad - 1)),
r = delta_calibration_radius * (1 - 0.1 * (zig_zag ? offset - circle : circle)),
interpol = FMOD(rad, 1);
- const float z_temp = calibration_probe(cos(a) * r, sin(a) * r, stow_after_each, set_up);
+ const float z_temp = calibration_probe(cos(a) * r, sin(a) * r, stow_after_each);
if (isnan(z_temp)) return false;
// split probe point to neighbouring calibration points
z_pt[uint8_t(LROUND(rad - interpol + NPP - 1)) % NPP + 1] += z_temp * sq(cos(RADIANS(interpol * 90)));
@@ -403,10 +386,7 @@ static float auto_tune_a() {
*
* Parameters:
*
- * S Setup mode; disables probe protection
- *
* Pn Number of probe points:
- * P-1 Checks the z_offset with a center probe and paper test.
* P0 Normalizes calibration.
* P1 Calibrates height only with center probe.
* P2 Probe center and towers. Calibrate height, endstops and delta radius.
@@ -429,22 +409,15 @@ static float auto_tune_a() {
*/
void GcodeSuite::G33() {
- const bool set_up =
- #if HAS_BED_PROBE
- parser.seen('S');
- #else
- false;
- #endif
-
- const int8_t probe_points = set_up ? 2 : parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
- if (!WITHIN(probe_points, -1, 10)) {
- SERIAL_ECHOLNPGM("?(P)oints is implausible (-1 - 10).");
+ const int8_t probe_points = parser.intval('P', DELTA_CALIBRATION_DEFAULT_POINTS);
+ if (!WITHIN(probe_points, 0, 10)) {
+ SERIAL_ECHOLNPGM("?(P)oints is implausible (0-10).");
return;
}
const bool towers_set = !parser.seen('T');
- const float calibration_precision = set_up ? Z_CLEARANCE_BETWEEN_PROBES / 5.0 : parser.floatval('C', 0.0);
+ const float calibration_precision = parser.floatval('C', 0.0);
if (calibration_precision < 0) {
SERIAL_ECHOLNPGM("?(C)alibration precision is implausible (>=0).");
return;
@@ -452,26 +425,18 @@ void GcodeSuite::G33() {
const int8_t force_iterations = parser.intval('F', 0);
if (!WITHIN(force_iterations, 0, 30)) {
- SERIAL_ECHOLNPGM("?(F)orce iteration is implausible (0 - 30).");
+ SERIAL_ECHOLNPGM("?(F)orce iteration is implausible (0-30).");
return;
}
const int8_t verbose_level = parser.byteval('V', 1);
if (!WITHIN(verbose_level, 0, 3)) {
- SERIAL_ECHOLNPGM("?(V)erbose level is implausible (0 - 3).");
+ SERIAL_ECHOLNPGM("?(V)erbose level is implausible (0-3).");
return;
}
const bool stow_after_each = parser.seen('E');
- if (set_up) {
- delta_height = 999.99;
- delta_radius = DELTA_PRINTABLE_RADIUS;
- ZERO(delta_endstop_adj);
- ZERO(delta_tower_angle_trim);
- recalc_delta_settings();
- }
-
const bool _0p_calibration = probe_points == 0,
_1p_calibration = probe_points == 1 || probe_points == -1,
_4p_calibration = probe_points == 2,
@@ -520,7 +485,6 @@ void GcodeSuite::G33() {
PGM_P checkingac = PSTR("Checking... AC");
serialprintPGM(checkingac);
if (verbose_level == 0) SERIAL_ECHOPGM(" (DRY-RUN)");
- if (set_up) SERIAL_ECHOPGM(" (SET-UP)");
SERIAL_EOL();
ui.set_status_P(checkingac);
@@ -539,7 +503,7 @@ void GcodeSuite::G33() {
// Probe the points
zero_std_dev_old = zero_std_dev;
- if (!probe_calibration_points(z_at_pt, probe_points, towers_set, stow_after_each, set_up)) {
+ if (!probe_calibration_points(z_at_pt, probe_points, towers_set, stow_after_each)) {
SERIAL_ECHOLNPGM("Correct delta settings with M665 and M666");
return AC_CLEANUP();
}
@@ -587,11 +551,6 @@ void GcodeSuite::G33() {
delta_calibration_radius = cr_old;
switch (probe_points) {
- case -1:
- #if HAS_BED_PROBE && HAS_LCD_MENU
- zprobe_zoffset += probe_z_shift(z_at_pt[CEN]);
- #endif
-
case 0:
test_precision = 0.00; // forced end
break;
@@ -690,7 +649,7 @@ void GcodeSuite::G33() {
else { // !end iterations
char mess[15];
if (iterations < 31)
- sprintf_P(mess, PSTR("Iteration : %02i"), (int)iterations);
+ sprintf_P(mess, PSTR("Iteration : %02i"), (unsigned int)iterations);
else
strcpy_P(mess, PSTR("No convergence"));
SERIAL_ECHO(mess);
diff --git a/Marlin/src/gcode/feature/pause/M600.cpp b/Marlin/src/gcode/feature/pause/M600.cpp
index 0e01c9ddfe..d7e57845e4 100644
--- a/Marlin/src/gcode/feature/pause/M600.cpp
+++ b/Marlin/src/gcode/feature/pause/M600.cpp
@@ -88,7 +88,7 @@ void GcodeSuite::M600() {
#if ENABLED(DUAL_X_CARRIAGE)
&& dual_x_carriage_mode != DXC_DUPLICATION_MODE && dual_x_carriage_mode != DXC_SCALED_DUPLICATION_MODE
#endif
- ) tool_change(target_extruder, 0, true);
+ ) tool_change(target_extruder, 0, false);
#endif
// Initial retract before move to filament change position
@@ -137,7 +137,7 @@ void GcodeSuite::M600() {
#if EXTRUDERS > 1
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
- tool_change(active_extruder_before_filament_change, 0, true);
+ tool_change(active_extruder_before_filament_change, 0, false);
#endif
}
diff --git a/Marlin/src/gcode/feature/pause/M701_M702.cpp b/Marlin/src/gcode/feature/pause/M701_M702.cpp
index fa9be253e2..95d7ea0160 100644
--- a/Marlin/src/gcode/feature/pause/M701_M702.cpp
+++ b/Marlin/src/gcode/feature/pause/M701_M702.cpp
@@ -71,7 +71,7 @@ void GcodeSuite::M701() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
- tool_change(target_extruder, 0, true);
+ tool_change(target_extruder, 0, false);
#endif
// Lift Z axis
@@ -96,7 +96,7 @@ void GcodeSuite::M701() {
#if EXTRUDERS > 1
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
- tool_change(active_extruder_before_filament_change, 0, true);
+ tool_change(active_extruder_before_filament_change, 0, false);
#endif
// Show status screen
@@ -138,7 +138,7 @@ void GcodeSuite::M702() {
// Change toolhead if specified
uint8_t active_extruder_before_filament_change = active_extruder;
if (active_extruder != target_extruder)
- tool_change(target_extruder, 0, true);
+ tool_change(target_extruder, 0, false);
#endif
// Lift Z axis
@@ -149,7 +149,7 @@ void GcodeSuite::M702() {
#if EXTRUDERS > 1 && ENABLED(FILAMENT_UNLOAD_ALL_EXTRUDERS)
if (!parser.seenval('T')) {
HOTEND_LOOP() {
- if (e != active_extruder) tool_change(e, 0, true);
+ if (e != active_extruder) tool_change(e, 0, false);
unload_filament(-fc_settings[e].unload_length, true, ADVANCED_PAUSE_MODE_UNLOAD_FILAMENT);
}
}
@@ -170,7 +170,7 @@ void GcodeSuite::M702() {
#if EXTRUDERS > 1
// Restore toolhead if it was changed
if (active_extruder_before_filament_change != active_extruder)
- tool_change(active_extruder_before_filament_change, 0, true);
+ tool_change(active_extruder_before_filament_change, 0, false);
#endif
// Show status screen
diff --git a/Marlin/src/gcode/temperature/M104_M109.cpp b/Marlin/src/gcode/temperature/M104_M109.cpp
index 39d65dc1a6..fede0fa8ff 100644
--- a/Marlin/src/gcode/temperature/M104_M109.cpp
+++ b/Marlin/src/gcode/temperature/M104_M109.cpp
@@ -125,7 +125,7 @@ void GcodeSuite::M109() {
print_job_timer.start();
#endif
- #if ENABLED(ULTRA_LCD)
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
if (thermalManager.isHeatingHotend(target_extruder) || !no_wait_for_cooling)
thermalManager.set_heating_message(target_extruder);
#endif
diff --git a/Marlin/src/gcode/temperature/M106_M107.cpp b/Marlin/src/gcode/temperature/M106_M107.cpp
index 12e2dc4f26..268a57d95f 100644
--- a/Marlin/src/gcode/temperature/M106_M107.cpp
+++ b/Marlin/src/gcode/temperature/M106_M107.cpp
@@ -25,10 +25,11 @@
#if FAN_COUNT > 0
#include "../gcode.h"
-#include "../../Marlin.h" // for fan_speed — should move those to Planner
+#include "../../Marlin.h" // for fan_speed
+
+#include "../../module/motion.h"
#if ENABLED(SINGLENOZZLE)
- #include "../../module/motion.h"
#include "../../module/tool_change.h"
#endif
@@ -46,36 +47,42 @@
* 3-255 = Set the speed for use with T2
*/
void GcodeSuite::M106() {
- const uint8_t p = parser.byteval('P');
- const uint16_t s = parser.ushortval('S', 255);
+ const uint8_t p = parser.byteval('P', active_extruder);
- #if ENABLED(SINGLENOZZLE)
- if (p != active_extruder) {
- if (p < EXTRUDERS) singlenozzle_fan_speed[p] = MIN(s, 255U);
- return;
- }
- #endif
+ if (p < MIN(EXTRUDERS, FAN_COUNT)) {
+ uint16_t s = parser.ushortval('S', 255);
+ NOMORE(s, 255U);
+
+ uint8_t np = p;
+
+ #if ENABLED(SINGLENOZZLE)
+ if (p != active_extruder) {
+ if (p < EXTRUDERS) singlenozzle_fan_speed[p] = s;
+ return;
+ }
+ np = 0; // Always use fan index 0 with SINGLENOZZLE
+ #endif
- if (p < FAN_COUNT) {
#if ENABLED(EXTRA_FAN_SPEED)
const int16_t t = parser.intval('T');
if (t > 0) {
switch (t) {
case 1:
- fan_speed[p] = old_fan_speed[p];
+ fan_speed[np] = old_fan_speed[np];
break;
case 2:
- old_fan_speed[p] = fan_speed[p];
- fan_speed[p] = new_fan_speed[p];
+ old_fan_speed[np] = fan_speed[np];
+ fan_speed[np] = new_fan_speed[np];
break;
default:
- new_fan_speed[p] = MIN(t, 255U);
+ new_fan_speed[np] = MIN(t, 255U);
break;
}
return;
}
#endif // EXTRA_FAN_SPEED
- fan_speed[p] = MIN(s, 255U);
+
+ fan_speed[np] = s;
}
}
@@ -83,7 +90,8 @@ void GcodeSuite::M106() {
* M107: Fan Off
*/
void GcodeSuite::M107() {
- const uint16_t p = parser.ushortval('P');
+ const uint16_t p = parser.byteval('P', active_extruder);
+
#if ENABLED(SINGLENOZZLE)
if (p != active_extruder) {
if (p < EXTRUDERS) singlenozzle_fan_speed[p] = 0;
@@ -91,7 +99,7 @@ void GcodeSuite::M107() {
}
#endif
- if (p < FAN_COUNT) fan_speed[p] = 0;
+ if (p < MIN(EXTRUDERS, FAN_COUNT)) fan_speed[p] = 0;
}
#endif // FAN_COUNT > 0
diff --git a/Marlin/src/inc/Conditionals_LCD.h b/Marlin/src/inc/Conditionals_LCD.h
index ad0a8d35d0..553f33a7d7 100644
--- a/Marlin/src/inc/Conditionals_LCD.h
+++ b/Marlin/src/inc/Conditionals_LCD.h
@@ -209,6 +209,15 @@
#define NEWPANEL
#endif
+ /**
+ * FSMC/SPI TFT PANELS
+ */
+ #if ENABLED(MKS_ROBIN_TFT)
+ #define ULTRA_LCD
+ #define DOGLCD
+ #define ULTIPANEL
+ #endif
+
/**
* I2C PANELS
*/
diff --git a/Marlin/src/inc/SanityCheck.h b/Marlin/src/inc/SanityCheck.h
index 8869d99c80..4fbf1463f6 100644
--- a/Marlin/src/inc/SanityCheck.h
+++ b/Marlin/src/inc/SanityCheck.h
@@ -1122,7 +1122,9 @@ static_assert(X_MAX_LENGTH >= X_BED_SIZE && Y_MAX_LENGTH >= Y_BED_SIZE,
#endif
#if HAS_MESH
- static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
+ #if DISABLED(JUNCTION_DEVIATION)
+ static_assert(DEFAULT_ZJERK > 0.1, "Low DEFAULT_ZJERK values are incompatible with mesh-based leveling.");
+ #endif
#elif ENABLED(G26_MESH_VALIDATION)
#error "G26_MESH_VALIDATION requires MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, or AUTO_BED_LEVELING_UBL."
#endif
diff --git a/Marlin/src/inc/Version.h b/Marlin/src/inc/Version.h
index f1e1b807fb..9629c56c29 100644
--- a/Marlin/src/inc/Version.h
+++ b/Marlin/src/inc/Version.h
@@ -39,7 +39,7 @@
/**
* Marlin release version identifier
*/
- #define SHORT_BUILD_VERSION "2.0.x_TR7"
+ #define SHORT_BUILD_VERSION "2.0.x_TR8"
/**
* Verbose version identifier which should contain a reference to the location
@@ -52,7 +52,7 @@
* here we define this default string as the date where the latest release
* version was tagged.
*/
- #define STRING_DISTRIBUTION_DATE "2018-12-16"
+ #define STRING_DISTRIBUTION_DATE "2019-01-05"
/**
* Required minimum Configuration.h and Configuration_adv.h file versions.
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
index e1a2ea9806..21d2e0dc33 100644
--- a/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
+++ b/Marlin/src/lcd/dogm/HAL_LCD_class_defines.h
@@ -81,3 +81,16 @@ public:
: U8GLIB(&u8g_dev_ssd1306_128x64_2x_i2c_2_wire, options)
{ }
};
+
+//
+// Very basic support for 320x240 TFT screen
+// Tested on MKS Robin TFT_V2.0 with ST7789V controller
+//
+extern u8g_dev_t u8g_dev_tft_320x240_upscale_from_128x64;
+
+class U8GLIB_TFT_320X240_UPSCALE_FROM_128X64 : public U8GLIB {
+public:
+ U8GLIB_TFT_320X240_UPSCALE_FROM_128X64(uint8_t cs, uint8_t rs, uint8_t reset = U8G_PIN_NONE)
+ : U8GLIB(&u8g_dev_tft_320x240_upscale_from_128x64, cs, rs, reset)
+ { }
+};
diff --git a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
index 7095307ceb..102987dc8b 100644
--- a/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
+++ b/Marlin/src/lcd/dogm/HAL_LCD_com_defines.h
@@ -47,6 +47,12 @@
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn
+ #if defined(STM32F1) || defined(STM32F1xx)
+ uint8_t u8g_com_stm32duino_fsmc_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+ #define U8G_COM_HAL_FSMC_FN u8g_com_stm32duino_fsmc_fn
+ #else
+ #define U8G_COM_HAL_FSMC_FN u8g_com_null_fn
+ #endif
#elif TARGET_LPC1768
uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_LPC1768_sw_spi_fn
@@ -63,6 +69,8 @@
uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_SSD_I2C_HAL u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
+ #define U8G_COM_HAL_FSMC_FN u8g_com_null_fn
+
#else // need to give them some definition or else get compiler errors
uint8_t u8g_com_null_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
#define U8G_COM_HAL_SW_SPI_FN u8g_com_null_fn
@@ -70,4 +78,5 @@
#define U8G_COM_ST7920_HAL_SW_SPI u8g_com_null_fn
#define U8G_COM_ST7920_HAL_HW_SPI u8g_com_null_fn
#define U8G_COM_SSD_I2C_HAL u8g_com_null_fn
+ #define U8G_COM_HAL_FSMC_FN u8g_com_null_fn
#endif
diff --git a/Marlin/src/lcd/dogm/dogm_Statusscreen.h b/Marlin/src/lcd/dogm/dogm_Statusscreen.h
index 8c1d3af86c..a8092ad3a6 100644
--- a/Marlin/src/lcd/dogm/dogm_Statusscreen.h
+++ b/Marlin/src/lcd/dogm/dogm_Statusscreen.h
@@ -668,8 +668,8 @@
#undef STATUS_FAN_FRAMES
#elif !defined(STATUS_FAN_FRAMES)
#define STATUS_FAN_FRAMES 2
-#elif STATUS_FAN_FRAMES > 3
- #error "Only 3 fan animation frames currently supported."
+#elif STATUS_FAN_FRAMES > 4
+ #error "A maximum of 4 fan animation frames is currently supported."
#endif
//
diff --git a/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
new file mode 100644
index 0000000000..14a2bcc20d
--- /dev/null
+++ b/Marlin/src/lcd/dogm/u8g_dev_tft_320x240_upscale_from_128x64.cpp
@@ -0,0 +1,177 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016, 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/*
+
+ u8g_dev_tft_320x240_upscale_from_128x64.cpp
+
+ Universal 8bit Graphics Library
+
+ Copyright (c) 2011, olikraus@gmail.com
+ All rights reserved.
+
+ Redistribution and use in source and binary forms, with or without modification,
+ are permitted provided that the following conditions are met:
+
+ * Redistributions of source code must retain the above copyright notice, this list
+ of conditions and the following disclaimer.
+
+ * Redistributions in binary form must reproduce the above copyright notice, this
+ list of conditions and the following disclaimer in the documentation and/or other
+ materials provided with the distribution.
+
+ THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
+ CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
+ INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
+ MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
+ DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
+ CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
+ SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
+ NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
+ LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
+ CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
+ STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
+ ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
+
+*/
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_GRAPHICAL_LCD
+
+#include "U8glib.h"
+#include "HAL_LCD_com_defines.h"
+#include "string.h"
+
+#define WIDTH 128
+#define HEIGHT 64
+#define PAGE_HEIGHT 8
+
+#define X_MIN 32
+#define Y_MIN 56
+#define X_MAX (X_MIN + 2 * WIDTH - 1)
+#define Y_MAX (Y_MIN + 2 * HEIGHT - 1)
+
+#define LCD_COLUMN 0x2A /* Colomn address register */
+#define LCD_ROW 0x2B /* Row address register */
+#define LCD_WRITE_RAM 0x2C
+
+static uint32_t lcd_id = 0;
+
+#define U8G_ESC_DATA(x) (uint8_t)(x >> 8), (uint8_t)(x & 0xFF)
+
+static const uint8_t page_first_sequence[] = {
+ U8G_ESC_ADR(0), LCD_COLUMN, U8G_ESC_ADR(1), U8G_ESC_DATA(X_MIN), U8G_ESC_DATA(X_MAX),
+ U8G_ESC_ADR(0), LCD_ROW, U8G_ESC_ADR(1), U8G_ESC_DATA(Y_MIN), U8G_ESC_DATA(Y_MAX),
+ U8G_ESC_ADR(0), LCD_WRITE_RAM, U8G_ESC_ADR(1),
+ U8G_ESC_END
+};
+
+static const uint8_t clear_screen_sequence[] = {
+ U8G_ESC_ADR(0), LCD_COLUMN, U8G_ESC_ADR(1), 0x00, 0x00, 0x01, 0x3F,
+ U8G_ESC_ADR(0), LCD_ROW, U8G_ESC_ADR(1), 0x00, 0x00, 0x00, 0xEF,
+ U8G_ESC_ADR(0), LCD_WRITE_RAM, U8G_ESC_ADR(1),
+ U8G_ESC_END
+};
+
+static const uint8_t st7789v_init_sequence[] = { // 0x8552 - ST7789V
+ U8G_ESC_ADR(0),
+ 0x10,
+ U8G_ESC_DLY(10),
+ 0x01,
+ U8G_ESC_DLY(100), U8G_ESC_DLY(100),
+ 0x11,
+ U8G_ESC_DLY(120),
+ 0x36, U8G_ESC_ADR(1), 0xA0,
+ U8G_ESC_ADR(0), 0x3A, U8G_ESC_ADR(1), 0x05,
+ U8G_ESC_ADR(0), LCD_COLUMN, U8G_ESC_ADR(1), 0x00, 0x00, 0x01, 0x3F,
+ U8G_ESC_ADR(0), LCD_ROW, U8G_ESC_ADR(1), 0x00, 0x00, 0x00, 0xEF,
+ U8G_ESC_ADR(0), 0xB2, U8G_ESC_ADR(1), 0x0C, 0x0C, 0x00, 0x33, 0x33,
+ U8G_ESC_ADR(0), 0xB7, U8G_ESC_ADR(1), 0x35,
+ U8G_ESC_ADR(0), 0xBB, U8G_ESC_ADR(1), 0x1F,
+ U8G_ESC_ADR(0), 0xC0, U8G_ESC_ADR(1), 0x2C,
+ U8G_ESC_ADR(0), 0xC2, U8G_ESC_ADR(1), 0x01, 0xC3,
+ U8G_ESC_ADR(0), 0xC4, U8G_ESC_ADR(1), 0x20,
+ U8G_ESC_ADR(0), 0xC6, U8G_ESC_ADR(1), 0x0F,
+ U8G_ESC_ADR(0), 0xD0, U8G_ESC_ADR(1), 0xA4, 0xA1,
+ U8G_ESC_ADR(0), 0xE0, U8G_ESC_ADR(1), 0xD0, 0x08, 0x11, 0x08, 0x0C, 0x15, 0x39, 0x33, 0x50, 0x36, 0x13, 0x14, 0x29, 0x2D,
+ U8G_ESC_ADR(0), 0xE1, U8G_ESC_ADR(1), 0xD0, 0x08, 0x10, 0x08, 0x06, 0x06, 0x39, 0x44, 0x51, 0x0B, 0x16, 0x14, 0x2F, 0x31,
+ U8G_ESC_ADR(0), 0x29, 0x11, 0x35, U8G_ESC_ADR(1), 0x00,
+ U8G_ESC_END
+};
+
+uint8_t u8g_dev_tft_320x240_upscale_from_128x64_fn(u8g_t *u8g, u8g_dev_t *dev, uint8_t msg, void *arg) {
+ u8g_pb_t *pb = (u8g_pb_t *)(dev->dev_mem);
+ uint16_t buffer[256];
+ uint32_t i, j, k;
+
+ switch(msg) {
+ case U8G_DEV_MSG_INIT:
+ dev->com_fn(u8g, U8G_COM_MSG_INIT, U8G_SPI_CLK_CYCLE_NONE, &lcd_id);
+ if (lcd_id == 0x040404) return 0; // No connected display on FSMC
+ if (lcd_id == 0xFFFFFF) return 0; // No connected display on SPI
+
+ memset(buffer, 0x00, sizeof(buffer));
+
+ if ((lcd_id & 0xFFFF) == 0x8552) // ST7789V
+ u8g_WriteEscSeqP(u8g, dev, st7789v_init_sequence);
+
+ u8g_WriteEscSeqP(u8g, dev, clear_screen_sequence);
+ for (i = 0; i < 960; i++)
+ u8g_WriteSequence(u8g, dev, 160, (uint8_t *)buffer);
+ break;
+
+ case U8G_DEV_MSG_STOP:
+ break;
+
+ case U8G_DEV_MSG_PAGE_FIRST:
+ u8g_WriteEscSeqP(u8g, dev, page_first_sequence);
+ break;
+
+ case U8G_DEV_MSG_PAGE_NEXT:
+ for (j = 0; j < 8; j++) {
+ k = 0;
+ for (i = 0; i < (uint32_t)pb->width; i++) {
+ const uint8_t b = *(((uint8_t *)pb->buf) + i);
+ const uint16_t c = TEST(b, j) ? 0x7FFF : 0x0000;
+ buffer[k++] = c; buffer[k++] = c;
+ }
+ for (k = 0; k < 2; k++) {
+ u8g_WriteSequence(u8g, dev, 128, (uint8_t*)buffer);
+ u8g_WriteSequence(u8g, dev, 128, (uint8_t*)&(buffer[64]));
+ u8g_WriteSequence(u8g, dev, 128, (uint8_t*)&(buffer[128]));
+ u8g_WriteSequence(u8g, dev, 128, (uint8_t*)&(buffer[192]));
+ }
+ }
+ break;
+
+ case U8G_DEV_MSG_SLEEP_ON:
+ case U8G_DEV_MSG_SLEEP_OFF:
+ return 1;
+ }
+ return u8g_dev_pb8v1_base_fn(u8g, dev, msg, arg);
+}
+
+U8G_PB_DEV(u8g_dev_tft_320x240_upscale_from_128x64, WIDTH, HEIGHT, PAGE_HEIGHT, u8g_dev_tft_320x240_upscale_from_128x64_fn, U8G_COM_HAL_FSMC_FN);
+
+#endif // HAS_GRAPHICAL_LCD
diff --git a/Marlin/src/lcd/dogm/ultralcd_DOGM.h b/Marlin/src/lcd/dogm/ultralcd_DOGM.h
index 42c4fa742d..a4b8534abb 100644
--- a/Marlin/src/lcd/dogm/ultralcd_DOGM.h
+++ b/Marlin/src/lcd/dogm/ultralcd_DOGM.h
@@ -117,6 +117,10 @@
// Connected via motherboard header
#define U8G_CLASS U8GLIB_SH1106_128X64
#define U8G_PARAM DOGLCD_SCK, DOGLCD_MOSI, DOGLCD_CS, LCD_PINS_DC, LCD_PINS_RS
+#elif ENABLED(MKS_ROBIN_TFT)
+ // Unspecified 320x240 TFT pre-initialized by built-in bootloader
+ #define U8G_CLASS U8GLIB_TFT_320X240_UPSCALE_FROM_128X64
+ #define U8G_PARAM FSMC_CS_PIN, FSMC_RS_PIN
#else
// for regular DOGM128 display with HW-SPI
//#define U8G_CLASS U8GLIB_DOGM128
diff --git a/Marlin/src/lcd/extensible_ui/ui_api.cpp b/Marlin/src/lcd/extensible_ui/ui_api.cpp
index a9dabaa0ac..0f6b9607c3 100644
--- a/Marlin/src/lcd/extensible_ui/ui_api.cpp
+++ b/Marlin/src/lcd/extensible_ui/ui_api.cpp
@@ -544,16 +544,20 @@ namespace ExtUI {
}
void setTargetTemp_celsius(float value, const heater_t heater) {
+ constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP);
+ const int16_t e = heater - H0;
#if HAS_HEATED_BED
if (heater == BED)
- thermalManager.setTargetBed(clamp(value,0,200));
+ thermalManager.setTargetBed(clamp(value, 0, BED_MAXTEMP - 15));
else
#endif
- thermalManager.setTargetHotend(clamp(value,0,500), heater - H0);
+ thermalManager.setTargetHotend(clamp(value, 0, heater_maxtemp[e] - 15), e);
}
void setTargetTemp_celsius(float value, const extruder_t extruder) {
- thermalManager.setTargetHotend(clamp(value,0,500), extruder - E0);
+ constexpr int16_t heater_maxtemp[HOTENDS] = ARRAY_BY_HOTENDS(HEATER_0_MAXTEMP, HEATER_1_MAXTEMP, HEATER_2_MAXTEMP, HEATER_3_MAXTEMP, HEATER_4_MAXTEMP);
+ const int16_t e = extruder - E0;
+ thermalManager.setTargetHotend(clamp(value, 0, heater_maxtemp[e] - 15), e);
}
void setFan_percent(float value, const fan_t fan) {
@@ -631,14 +635,14 @@ namespace ExtUI {
pos;
card.getfilename_sorted(nr);
- return card.filename && card.filename[0] != '\0';
+ return card.filename[0] != '\0';
#else
return false;
#endif
}
const char* FileList::filename() {
- return IFSD(card.longFilename && card.longFilename[0] ? card.longFilename : card.filename, "");
+ return IFSD(card.longFilename[0] ? card.longFilename : card.filename, "");
}
const char* FileList::shortFilename() {
diff --git a/Marlin/src/lcd/language/language_cz.h b/Marlin/src/lcd/language/language_cz.h
index e2a9256b81..8fb615cffe 100644
--- a/Marlin/src/lcd/language/language_cz.h
+++ b/Marlin/src/lcd/language/language_cz.h
@@ -47,7 +47,11 @@
#define MSG_AUTOSTART _UxGT("Autostart")
#define MSG_DISABLE_STEPPERS _UxGT("Uvolnit motory")
#define MSG_DEBUG_MENU _UxGT("Nabídka ladění")
-#define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. průběhu")
+#if LCD_WIDTH >= 20
+ #define MSG_PROGRESS_BAR_TEST _UxGT("Test ukaz. průběhu")
+#else
+ #define MSG_PROGRESS_BAR_TEST _UxGT("Test uk. průběhu")
+#endif
#define MSG_AUTO_HOME _UxGT("Domovská pozice")
#define MSG_AUTO_HOME_X _UxGT("Domů osa X")
#define MSG_AUTO_HOME_Y _UxGT("Domů osa Y")
@@ -106,8 +110,8 @@
#define MSG_UBL_DONE_EDITING_MESH _UxGT("Konec úprav sítě")
#define MSG_UBL_BUILD_CUSTOM_MESH _UxGT("Vlastní síť")
#define MSG_UBL_BUILD_MESH_MENU _UxGT("Vytvořit síť")
-#define MSG_UBL_BUILD_MESH_M1 _UxGT("Síť bodu " PREHEAT_1_LABEL)
-#define MSG_UBL_BUILD_MESH_M2 _UxGT("Síť bodu " PREHEAT_2_LABEL)
+#define MSG_UBL_BUILD_MESH_M1 _UxGT("Síť bodů " PREHEAT_1_LABEL)
+#define MSG_UBL_BUILD_MESH_M2 _UxGT("Síť bodů " PREHEAT_2_LABEL)
#define MSG_UBL_BUILD_COLD_MESH _UxGT("Studená síť bodů")
#define MSG_UBL_MESH_HEIGHT_ADJUST _UxGT("Upravit výšku sítě")
#define MSG_UBL_MESH_HEIGHT_AMOUNT _UxGT("Výška")
@@ -117,8 +121,8 @@
#define MSG_UBL_VALIDATE_CUSTOM_MESH _UxGT("Kontrola vlast. sítě")
#define MSG_UBL_CONTINUE_MESH _UxGT("Pokračovat v síťi")
#define MSG_UBL_MESH_LEVELING _UxGT("Síťové rovnání")
-#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodove rovnání")
-#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mrizkove rovnání")
+#define MSG_UBL_3POINT_MESH_LEVELING _UxGT("3-bodové rovnání")
+#define MSG_UBL_GRID_MESH_LEVELING _UxGT("Mřížkové rovnání")
#define MSG_UBL_MESH_LEVEL _UxGT("Srovnat podložku")
#define MSG_UBL_SIDE_POINTS _UxGT("Postranní body")
#define MSG_UBL_MAP_TYPE _UxGT("Typ sítě bodu")
@@ -143,12 +147,12 @@
#define MSG_MESH_LOADED _UxGT("Síť %i načtena")
#define MSG_MESH_SAVED _UxGT("Síť %i uložena")
#define MSG_NO_STORAGE _UxGT("Nedostatek místa")
-#define MSG_UBL_SAVE_ERROR _UxGT("Err: Uložit UBL")
-#define MSG_UBL_RESTORE_ERROR _UxGT("Err: Obnovit UBL")
+#define MSG_UBL_SAVE_ERROR _UxGT("Ch.: Uložit UBL")
+#define MSG_UBL_RESTORE_ERROR _UxGT("Ch.: Obnovit UBL")
#define MSG_UBL_Z_OFFSET_STOPPED _UxGT("Konec Z-Offsetu")
#define MSG_UBL_STEP_BY_STEP_MENU _UxGT("UBL Postupně")
-#define MSG_LED_CONTROL _UxGT("LED Nastavení")
+#define MSG_LED_CONTROL _UxGT("Nastavení LED")
#define MSG_LEDS _UxGT("Světla")
#define MSG_LED_PRESETS _UxGT("Světla Předvolby")
#define MSG_SET_LEDS_RED _UxGT("Červená")
@@ -168,7 +172,7 @@
#define MSG_LED_BRIGHTNESS _UxGT("Jas")
#define MSG_USER_MENU _UxGT("Vlastní příkazy")
-#define MSG_MOVING _UxGT("Posouvani...")
+#define MSG_MOVING _UxGT("Posouvání...")
#define MSG_FREE_XY _UxGT("Uvolnit XY")
#define MSG_MOVE_X _UxGT("Posunout X")
#define MSG_MOVE_Y _UxGT("Posunout Y")
@@ -208,6 +212,7 @@
#define MSG_VC_JERK _UxGT("Vz-jerk")
#endif
#define MSG_VE_JERK _UxGT("Ve-jerk")
+#define MSG_JUNCTION_DEVIATION _UxGT("Odchylka spoje")
#define MSG_VELOCITY _UxGT("Rychlost")
#define MSG_VMAX _UxGT("Vmax ")
#define MSG_VMIN _UxGT("Vmin")
@@ -253,7 +258,7 @@
#define MSG_PAUSE_PRINT _UxGT("Pozastavit tisk")
#define MSG_RESUME_PRINT _UxGT("Obnovit tisk")
#define MSG_STOP_PRINT _UxGT("Zastavit tisk")
-#define MSG_OUTAGE_RECOVERY _UxGT("Obnova vypadku")
+#define MSG_OUTAGE_RECOVERY _UxGT("Obnova výpadku")
#define MSG_CARD_MENU _UxGT("Tisknout z SD")
#define MSG_NO_CARD _UxGT("Žádná SD karta")
#define MSG_DWELL _UxGT("Uspáno...")
@@ -295,10 +300,10 @@
#define MSG_BABYSTEP_Z _UxGT("Babystep Z")
#define MSG_ENDSTOP_ABORT _UxGT("Endstop abort")
#define MSG_HEATING_FAILED_LCD _UxGT("Chyba zahřívání")
-#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř. podl.")
+#define MSG_HEATING_FAILED_LCD_BED _UxGT("Chyba zahř.podl.")
#define MSG_ERR_REDUNDANT_TEMP _UxGT("REDUND. TEPLOTA")
-#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ SKOK")
-#define MSG_THERMAL_RUNAWAY_BED _UxGT("PODL. TEPL. SKOK")
+#define MSG_THERMAL_RUNAWAY _UxGT("TEPLOTNÍ ÚNIK")
+#define MSG_THERMAL_RUNAWAY_BED _UxGT("TEPL. ÚNIK PODL.")
#define MSG_ERR_MAXTEMP _UxGT("VYSOKÁ TEPLOTA")
#define MSG_ERR_MINTEMP _UxGT("NÍZKA TEPLOTA")
#define MSG_ERR_MAXTEMP_BED _UxGT("VYS. TEPL. PODL.")
@@ -310,9 +315,17 @@
#define MSG_SHORT_HOUR _UxGT("h")
#define MSG_SHORT_MINUTE _UxGT("m")
#define MSG_HEATING _UxGT("Zahřívání...")
-#define MSG_COOLING _UxGT("Chlazení")
-#define MSG_BED_HEATING _UxGT("Zahřívání podl...")
-#define MSG_BED_COOLING _UxGT("Chlazení podl...")
+#define MSG_COOLING _UxGT("Chlazení...")
+#if LCD_WIDTH >= 20
+ #define MSG_BED_HEATING _UxGT("Zahřívání podložky")
+#else
+ #define MSG_BED_HEATING _UxGT("Zahřívání podl.")
+#endif
+#if LCD_WIDTH >= 20
+ #define MSG_BED_COOLING _UxGT("Chlazení podložky")
+#else
+ #define MSG_BED_COOLING _UxGT("Chlazení podl.")
+#endif
#define MSG_DELTA_CALIBRATE _UxGT("Delta Kalibrace")
#define MSG_DELTA_CALIBRATE_X _UxGT("Kalibrovat X")
#define MSG_DELTA_CALIBRATE_Y _UxGT("Kalibrovat Y")
@@ -374,34 +387,34 @@
#if LCD_HEIGHT >= 4
// Up to 3 lines allowed
- #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím")
- #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení")
- #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu")
- #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
- #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
- #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
- #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament")
- #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte")
- #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...")
- #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro")
- #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky")
- #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím")
- #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.")
- #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
- #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
- #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
- #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na")
- #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení")
- #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
- #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
- #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte prosím")
+ #define MSG_FILAMENT_CHANGE_INIT_2 _UxGT("na zahájení")
+ #define MSG_FILAMENT_CHANGE_INIT_3 _UxGT("výměny filamentu")
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Čekejte prosím")
+ #define MSG_FILAMENT_CHANGE_UNLOAD_2 _UxGT("na vysunuti")
+ #define MSG_FILAMENT_CHANGE_UNLOAD_3 _UxGT("filamentu")
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte filament")
+ #define MSG_FILAMENT_CHANGE_INSERT_2 _UxGT("a stiskněte")
+ #define MSG_FILAMENT_CHANGE_INSERT_3 _UxGT("tlačítko...")
+ #define MSG_FILAMENT_CHANGE_HEAT_1 _UxGT("Klikněte pro")
+ #define MSG_FILAMENT_CHANGE_HEAT_2 _UxGT("nahřátí trysky")
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Čekejte prosím")
+ #define MSG_FILAMENT_CHANGE_HEATING_2 _UxGT("na nahřátí tr.")
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Čekejte prosím")
+ #define MSG_FILAMENT_CHANGE_LOAD_2 _UxGT("na zavedení")
+ #define MSG_FILAMENT_CHANGE_LOAD_3 _UxGT("filamentu")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vyčkejte na")
+ #define MSG_FILAMENT_CHANGE_PURGE_2 _UxGT("vytlačení")
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Čekejte prosím")
+ #define MSG_FILAMENT_CHANGE_RESUME_2 _UxGT("na pokračování")
+ #define MSG_FILAMENT_CHANGE_RESUME_3 _UxGT("tisku")
#else // LCD_HEIGHT < 4
// Up to 2 lines allowed
- #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...")
- #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
- #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
- #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
- #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
- #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...")
- #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
+ #define MSG_FILAMENT_CHANGE_INIT_1 _UxGT("Čekejte...")
+ #define MSG_FILAMENT_CHANGE_UNLOAD_1 _UxGT("Vysouvání...")
+ #define MSG_FILAMENT_CHANGE_INSERT_1 _UxGT("Vložte, klikněte")
+ #define MSG_FILAMENT_CHANGE_HEATING_1 _UxGT("Nahřívání...")
+ #define MSG_FILAMENT_CHANGE_LOAD_1 _UxGT("Zavádění...")
+ #define MSG_FILAMENT_CHANGE_PURGE_1 _UxGT("Vytlačování...")
+ #define MSG_FILAMENT_CHANGE_RESUME_1 _UxGT("Pokračování...")
#endif // LCD_HEIGHT < 4
diff --git a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
index f83057b658..9583f89ce3 100644
--- a/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
+++ b/Marlin/src/lcd/menu/menu_delta_calibrate.cpp
@@ -111,8 +111,6 @@ void menu_delta_calibrate() {
#if ENABLED(DELTA_AUTO_CALIBRATION)
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
- MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 S P1"));
- MENU_ITEM(gcode, MSG_DELTA_Z_OFFSET_CALIBRATE, PSTR("G33 P-1"));
#if ENABLED(EEPROM_SETTINGS)
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
diff --git a/Marlin/src/lcd/menu/menu_main.cpp b/Marlin/src/lcd/menu/menu_main.cpp
index 6217576858..179fe035fd 100644
--- a/Marlin/src/lcd/menu/menu_main.cpp
+++ b/Marlin/src/lcd/menu/menu_main.cpp
@@ -65,6 +65,13 @@
ui.return_to_status();
}
+ void menu_sdcard_abort_confirm() {
+ START_MENU();
+ MENU_BACK(MSG_MAIN);
+ MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
+ END_MENU();
+ }
+
#endif // SDSUPPORT
void menu_tune();
@@ -88,7 +95,8 @@ void menu_main() {
MENU_ITEM(function, MSG_PAUSE_PRINT, lcd_sdcard_pause);
else
MENU_ITEM(function, MSG_RESUME_PRINT, lcd_sdcard_resume);
- MENU_ITEM(function, MSG_STOP_PRINT, lcd_sdcard_stop);
+
+ MENU_ITEM(submenu, MSG_STOP_PRINT, menu_sdcard_abort_confirm);
}
else {
MENU_ITEM(submenu, MSG_CARD_MENU, menu_sdcard);
diff --git a/Marlin/src/lcd/menu/menu_temperature.cpp b/Marlin/src/lcd/menu/menu_temperature.cpp
index 2883fe752e..e0d559025e 100644
--- a/Marlin/src/lcd/menu/menu_temperature.cpp
+++ b/Marlin/src/lcd/menu/menu_temperature.cpp
@@ -44,7 +44,7 @@ uint8_t MarlinUI::preheat_fan_speed[2];
//
void _lcd_preheat(const int16_t endnum, const int16_t temph, const int16_t tempb, const uint8_t fan) {
- if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum], temph), endnum);
+ if (temph > 0) thermalManager.setTargetHotend(MIN(heater_maxtemp[endnum] - 15, temph), endnum);
#if HAS_HEATED_BED
if (tempb >= 0) thermalManager.setTargetBed(tempb);
#else
diff --git a/Marlin/src/lcd/ultralcd.cpp b/Marlin/src/lcd/ultralcd.cpp
index 20eae21ea3..af43114872 100644
--- a/Marlin/src/lcd/ultralcd.cpp
+++ b/Marlin/src/lcd/ultralcd.cpp
@@ -419,7 +419,8 @@ void MarlinUI::status_screen() {
//
#if DISABLED(PROGRESS_MSG_ONCE) || (PROGRESS_MSG_EXPIRE > 0)
- millis_t ms = millis();
+ #define GOT_MS
+ const millis_t ms = millis();
#endif
// If the message will blink rather than expire...
@@ -464,31 +465,40 @@ void MarlinUI::status_screen() {
#endif // HAS_LCD_MENU
- #if ENABLED(ULTIPANEL_FEEDMULTIPLY) && HAS_ENCODER_ACTION
+ #if ENABLED(ULTIPANEL_FEEDMULTIPLY)
+
+ const int16_t old_frm = feedrate_percentage;
+ int16_t new_frm = old_frm + (int32_t)encoderPosition;
- const int16_t new_frm = feedrate_percentage + (int32_t)encoderPosition;
// Dead zone at 100% feedrate
- if ((feedrate_percentage < 100 && new_frm > 100) || (feedrate_percentage > 100 && new_frm < 100)) {
- feedrate_percentage = 100;
- encoderPosition = 0;
+ if (old_frm == 100) {
+ if ((int32_t)encoderPosition > ENCODER_FEEDRATE_DEADZONE)
+ new_frm -= ENCODER_FEEDRATE_DEADZONE;
+ else if ((int32_t)encoderPosition < -(ENCODER_FEEDRATE_DEADZONE))
+ new_frm += ENCODER_FEEDRATE_DEADZONE;
+ else
+ new_frm = old_frm;
}
- else if (feedrate_percentage == 100) {
- if ((int32_t)encoderPosition > ENCODER_FEEDRATE_DEADZONE) {
- feedrate_percentage += (int32_t)encoderPosition - (ENCODER_FEEDRATE_DEADZONE);
- encoderPosition = 0;
- }
- else if ((int32_t)encoderPosition < -(ENCODER_FEEDRATE_DEADZONE)) {
- feedrate_percentage += (int32_t)encoderPosition + ENCODER_FEEDRATE_DEADZONE;
- encoderPosition = 0;
- }
- }
- else {
+ else if ((old_frm < 100 && new_frm > 100) || (old_frm > 100 && new_frm < 100))
+ new_frm = 100;
+
+ new_frm = constrain(new_frm, 10, 999);
+
+ if (old_frm != new_frm) {
feedrate_percentage = new_frm;
encoderPosition = 0;
+ #if ENABLED(BEEP_ON_FEEDRATE_CHANGE)
+ static millis_t next_beep;
+ #ifndef GOT_MS
+ const millis_t ms = millis();
+ #endif
+ if (ELAPSED(ms, next_beep)) {
+ BUZZ(FEEDRATE_CHANGE_BEEP_DURATION, FEEDRATE_CHANGE_BEEP_FREQUENCY);
+ next_beep = ms + 500UL;
+ }
+ #endif
}
- feedrate_percentage = constrain(feedrate_percentage, 10, 999);
-
#endif // ULTIPANEL_FEEDMULTIPLY
draw_status_screen();
diff --git a/Marlin/src/module/configuration_store.cpp b/Marlin/src/module/configuration_store.cpp
index 9d7451588e..29058e3233 100644
--- a/Marlin/src/module/configuration_store.cpp
+++ b/Marlin/src/module/configuration_store.cpp
@@ -488,7 +488,7 @@ void MarlinSettings::postprocess() {
EEPROM_WRITE(dummy);
#endif
#else
- const float planner_max_jerk[XYZE] = { float(DEFAULT_XJERK), float(DEFAULT_YJERK), float(DEFAULT_ZJERK), float(DEFAULT_EJERK) };
+ const float planner_max_jerk[XYZE] = { float(DEFAULT_EJERK) };
EEPROM_WRITE(planner_max_jerk);
#endif
@@ -696,7 +696,7 @@ void MarlinSettings::postprocess() {
// LCD Preheat settings
//
{
- _FIELD_TEST(lcd_preheat_hotend_temp);
+ _FIELD_TEST(ui_preheat_hotend_temp);
#if HAS_LCD_MENU
const int16_t (&ui_preheat_hotend_temp)[2] = ui.preheat_hotend_temp,
diff --git a/Marlin/src/module/delta.cpp b/Marlin/src/module/delta.cpp
index d7bebf3ecf..114dfee198 100644
--- a/Marlin/src/module/delta.cpp
+++ b/Marlin/src/module/delta.cpp
@@ -39,6 +39,7 @@
#if ENABLED(SENSORLESS_HOMING)
#include "../feature/tmc_util.h"
+ #include "../module/stepper_indirection.h"
#endif
// Initialized by settings.load()
diff --git a/Marlin/src/module/motion.cpp b/Marlin/src/module/motion.cpp
index f5a4deb015..803ddbc8c0 100644
--- a/Marlin/src/module/motion.cpp
+++ b/Marlin/src/module/motion.cpp
@@ -47,7 +47,7 @@
#include "../feature/bedlevel/bedlevel.h"
#endif
-#if HAS_AXIS_UNHOMED_ERR && ENABLED(ULTRA_LCD)
+#if HAS_AXIS_UNHOMED_ERR && (ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI))
#include "../lcd/ultralcd.h"
#endif
@@ -539,7 +539,7 @@ void clean_up_after_endstop_or_probe_move() { bracket_probe_move(false); }
soft_endstop_min[axis] = base_min_pos(axis);
soft_endstop_max[axis] = (axis == Z_AXIS ? delta_height
#if HAS_BED_PROBE
- - zprobe_zoffset + Z_PROBE_OFFSET_FROM_EXTRUDER
+ - zprobe_zoffset
#endif
: base_max_pos(axis));
@@ -1019,7 +1019,7 @@ void prepare_move_to_destination() {
if (zz) SERIAL_ECHOPGM(MSG_Z);
SERIAL_ECHOLNPGM(" " MSG_FIRST);
- #if ENABLED(ULTRA_LCD)
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
ui.status_printf_P(0, PSTR(MSG_HOME " %s%s%s " MSG_FIRST), xx ? MSG_X : "", yy ? MSG_Y : "", zz ? MSG_Z : "");
#endif
return true;
@@ -1277,7 +1277,7 @@ void set_axis_is_at_home(const AxisEnum axis) {
#elif ENABLED(DELTA)
current_position[axis] = (axis == Z_AXIS ? delta_height
#if HAS_BED_PROBE
- - zprobe_zoffset + Z_PROBE_OFFSET_FROM_EXTRUDER
+ - zprobe_zoffset
#endif
: base_home_pos(axis));
#else
diff --git a/Marlin/src/module/planner.cpp b/Marlin/src/module/planner.cpp
index 9c618096c5..8de2db5c06 100644
--- a/Marlin/src/module/planner.cpp
+++ b/Marlin/src/module/planner.cpp
@@ -236,7 +236,6 @@ void Planner::init() {
}
#if ENABLED(S_CURVE_ACCELERATION)
-
#ifdef __AVR__
/**
* This routine returns 0x1000000 / d, getting the inverse as fast as possible.
@@ -1570,7 +1569,7 @@ void Planner::synchronize() {
#endif
#endif
- void Planner::add_backlash_correction_steps(const int32_t da, const int32_t db, const int32_t dc, const uint8_t dm, block_t * const block, float (&delta_mm)[ABCE]) {
+ void Planner::add_backlash_correction_steps(const int32_t da, const int32_t db, const int32_t dc, const uint8_t dm, block_t * const block) {
static uint8_t last_direction_bits;
uint8_t changed_dir = last_direction_bits ^ dm;
// Ignore direction change if no steps are taken in that direction
@@ -1598,23 +1597,21 @@ void Planner::synchronize() {
if (!changed_dir) return;
#endif
- const bool positive[XYZ] = { da > 0, db > 0, dc > 0 },
- non_zero[XYZ] = { da != 0, db != 0, dc != 0 };
- bool made_adjustment = false;
+ LOOP_XYZ(axis) {
+ if (backlash_distance_mm[axis]) {
+ const bool reversing = TEST(dm,axis);
- LOOP_XYZ(i) {
- if (backlash_distance_mm[i]) {
// When an axis changes direction, add axis backlash to the residual error
- if (TEST(changed_dir, i))
- residual_error[i] += backlash_correction * (positive[i] ? 1.0f : -1.0f) * backlash_distance_mm[i] * planner.settings.axis_steps_per_mm[i];
+ if (TEST(changed_dir, axis))
+ residual_error[axis] += backlash_correction * (reversing ? -1.0f : 1.0f) * backlash_distance_mm[axis] * planner.settings.axis_steps_per_mm[axis];
// Decide how much of the residual error to correct in this segment
- int32_t error_correction = residual_error[i];
+ int32_t error_correction = residual_error[axis];
#ifdef BACKLASH_SMOOTHING_MM
if (error_correction && backlash_smoothing_mm != 0) {
// Take up a portion of the residual_error in this segment, but only when
// the current segment travels in the same direction as the correction
- if (non_zero[i] && positive[i] == (error_correction > 0)) {
+ if (reversing == (error_correction < 0)) {
if (segment_proportion == 0)
segment_proportion = MIN(1.0f, block->millimeters / backlash_smoothing_mm);
error_correction *= segment_proportion;
@@ -1625,17 +1622,11 @@ void Planner::synchronize() {
#endif
// Making a correction reduces the residual error and modifies delta_mm
if (error_correction) {
- block->steps[i] += ABS(error_correction);
- residual_error[i] -= error_correction;
- delta_mm[i] = (positive[i] ? 1.0f : -1.0f) * block->steps[i] * steps_to_mm[i];
- made_adjustment = true;
+ block->steps[axis] += ABS(error_correction);
+ residual_error[axis] -= error_correction;
}
}
}
-
- // If any of the axes were adjusted, recompute block->millimeters
- if (made_adjustment)
- block->millimeters = SQRT(sq(delta_mm[X_AXIS]) + sq(delta_mm[Y_AXIS]) + sq(delta_mm[Z_AXIS]));
}
#endif // BACKLASH_COMPENSATION
@@ -1887,11 +1878,17 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
#endif
);
+ /**
+ * At this point at least one of the axes has more steps than
+ * MIN_STEPS_PER_SEGMENT, ensuring the segment won't get dropped as
+ * zero-length. It's important to not apply corrections
+ * to blocks that would get dropped!
+ *
+ * A correction function is permitted to add steps to an axis, it
+ * should *never* remove steps!
+ */
#if ENABLED(BACKLASH_COMPENSATION)
- // If we make it here, at least one of the axes has more steps than
- // MIN_STEPS_PER_SEGMENT, so the segment won't get dropped by Marlin
- // and it is okay to add steps for backlash correction.
- add_backlash_correction_steps(da, db, dc, dm, block, delta_mm);
+ add_backlash_correction_steps(da, db, dc, dm, block);
#endif
}
@@ -2342,7 +2339,6 @@ bool Planner::_populate_block(block_t * const block, bool split_move,
float vmax_junction_sqr; // Initial limit on the segment entry velocity (mm/s)^2
#if ENABLED(JUNCTION_DEVIATION)
-
/**
* Compute maximum allowable entry speed at junction by centripetal acceleration approximation.
* Let a circle be tangent to both previous and current path line segments, where the junction
diff --git a/Marlin/src/module/planner.h b/Marlin/src/module/planner.h
index 2592f45b54..45c18365ab 100644
--- a/Marlin/src/module/planner.h
+++ b/Marlin/src/module/planner.h
@@ -339,7 +339,7 @@ class Planner {
#endif
#if ENABLED(BACKLASH_COMPENSATION)
- static void add_backlash_correction_steps(const int32_t da, const int32_t db, const int32_t dc, const uint8_t dm, block_t * const block, float (&delta_mm)[ABCE]);
+ static void add_backlash_correction_steps(const int32_t da, const int32_t db, const int32_t dc, const uint8_t dm, block_t * const block);
#endif
public:
diff --git a/Marlin/src/module/stepper.cpp b/Marlin/src/module/stepper.cpp
index 69069562cc..ef2098feee 100644
--- a/Marlin/src/module/stepper.cpp
+++ b/Marlin/src/module/stepper.cpp
@@ -256,6 +256,18 @@ int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 };
A##3_STEP_WRITE(V); \
}
+#define TRIPLE_SEPARATE_APPLY_STEP(A,V) \
+ if (separate_multi_axis) { \
+ if (!locked_##A##_motor) A##_STEP_WRITE(V); \
+ if (!locked_##A##2_motor) A##2_STEP_WRITE(V); \
+ if (!locked_##A##3_motor) A##3_STEP_WRITE(V); \
+ } \
+ else { \
+ A##_STEP_WRITE(V); \
+ A##2_STEP_WRITE(V); \
+ A##3_STEP_WRITE(V); \
+ }
+
#if ENABLED(X_DUAL_STEPPER_DRIVERS)
#define X_APPLY_DIR(v,Q) do{ X_DIR_WRITE(v); X2_DIR_WRITE((v) != INVERT_X2_VS_X_DIR); }while(0)
#if ENABLED(X_DUAL_ENDSTOPS)
@@ -301,6 +313,8 @@ int8_t Stepper::count_direction[NUM_AXIS] = { 0, 0, 0, 0 };
#define Z_APPLY_DIR(v,Q) do{ Z_DIR_WRITE(v); Z2_DIR_WRITE(v); Z3_DIR_WRITE(v); }while(0)
#if ENABLED(Z_TRIPLE_ENDSTOPS)
#define Z_APPLY_STEP(v,Q) TRIPLE_ENDSTOP_APPLY_STEP(Z,v)
+ #elif ENABLED(Z_STEPPER_AUTO_ALIGN)
+ #define Z_APPLY_STEP(v,Q) TRIPLE_SEPARATE_APPLY_STEP(Z,v)
#else
#define Z_APPLY_STEP(v,Q) do{ Z_STEP_WRITE(v); Z2_STEP_WRITE(v); Z3_STEP_WRITE(v); }while(0)
#endif
diff --git a/Marlin/src/module/temperature.cpp b/Marlin/src/module/temperature.cpp
index c086d29e7a..8adcd8c67e 100644
--- a/Marlin/src/module/temperature.cpp
+++ b/Marlin/src/module/temperature.cpp
@@ -286,6 +286,11 @@ uint8_t Temperature::soft_pwm_amount[HOTENDS];
next_auto_fan_check_ms = next_temp_ms + 2500UL;
#endif
+ if (target > GHV(BED_MAXTEMP, maxttemp[heater]) - 15) {
+ SERIAL_ECHOLNPGM(MSG_PID_TEMP_TOO_HIGH);
+ return;
+ }
+
SERIAL_ECHOLNPGM(MSG_PID_AUTOTUNE_START);
disable_all_heaters();
@@ -2465,7 +2470,7 @@ void Temperature::isr() {
#endif // AUTO_REPORT_TEMPERATURES
- #if ENABLED(ULTRA_LCD)
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
void Temperature::set_heating_message(const uint8_t e) {
const bool heating = isHeatingHotend(e);
#if HOTENDS > 1
diff --git a/Marlin/src/module/temperature.h b/Marlin/src/module/temperature.h
index f9d21c3541..31f8f2eb3e 100644
--- a/Marlin/src/module/temperature.h
+++ b/Marlin/src/module/temperature.h
@@ -407,7 +407,7 @@ class Temperature {
#if ENABLED(AUTO_POWER_CONTROL)
powerManager.power_on();
#endif
- target_temperature[HOTEND_INDEX] = celsius;
+ target_temperature[HOTEND_INDEX] = MIN(celsius, maxttemp[HOTEND_INDEX] - 15);
#if WATCH_HOTENDS
start_watching_heater(HOTEND_INDEX);
#endif
@@ -451,7 +451,7 @@ class Temperature {
#endif
target_temperature_bed =
#ifdef BED_MAXTEMP
- MIN(celsius, BED_MAXTEMP)
+ MIN(celsius, BED_MAXTEMP - 15)
#else
celsius
#endif
@@ -618,7 +618,7 @@ class Temperature {
#endif
#endif
- #if ENABLED(ULTRA_LCD)
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
static void set_heating_message(const uint8_t e);
#endif
diff --git a/Marlin/src/module/thermistor/thermistor_61.h b/Marlin/src/module/thermistor/thermistor_61.h
index 3b8d8af06a..14a96c682b 100644
--- a/Marlin/src/module/thermistor/thermistor_61.h
+++ b/Marlin/src/module/thermistor/thermistor_61.h
@@ -23,93 +23,93 @@
// R25 = 100 kOhm, beta25 = 3950 K, 4.7 kOhm pull-up,
// Formbot / Vivedino high temp 100k thermistor
// 100KR13950181203
-// Generated with https://www.thingiverse.com/thing:103668
+// Generated with modified version of https://www.thingiverse.com/thing:103668
// Using table 1 with datasheet values
// Resistance 100k Ohms at 25deg. C
-//Resistance Tolerance + / -1%
-//B Value 3950K at 25/50 deg. C
-//B Value Tolerance + / - 1%
+// Resistance Tolerance + / -1%
+// B Value 3950K at 25/50 deg. C
+// B Value Tolerance + / - 1%
const short temptable_61[][2] PROGMEM = {
- { OV(5) , 400 },
-{ OV(12) , 350 },
-{ OV(13) , 345 },
-{ OV(14) , 340 },
-{ OV(14) , 335 },
-{ OV(15) , 330 },
-{ OV(16) , 325 },
-{ OV(17) , 320 },
-{ OV(19) , 315 },
-{ OV(20) , 310 },
-{ OV(21) , 305 },
-{ OV(23) , 300 },
-{ OV(24) , 295 },
-{ OV(26) , 290 },
-{ OV(28) , 285 },
-{ OV(30) , 280 },
-{ OV(33) , 275 },
-{ OV(35) , 270 },
-{ OV(38) , 265 },
-{ OV(41) , 260 },
-{ OV(44) , 255 },
-{ OV(48) , 250 },
-{ OV(52) , 245 },
-{ OV(56) , 240 },
-{ OV(61) , 235 },
-{ OV(66) , 230 },
-{ OV(72) , 225 },
-{ OV(79) , 220 },
-{ OV(86) , 215 },
-{ OV(93) , 210 },
-{ OV(102) , 205 },
-{ OV(111) , 200 },
-{ OV(122) , 195 },
-{ OV(133) , 190 },
-{ OV(146) , 185 },
-{ OV(160) , 180 },
-{ OV(175) , 175 },
-{ OV(191) , 170 },
-{ OV(210) , 165 },
-{ OV(229) , 160 },
-{ OV(251) , 155 },
-{ OV(274) , 150 },
-{ OV(299) , 145 },
-{ OV(327) , 140 },
-{ OV(355) , 135 },
-{ OV(386) , 130 },
-{ OV(419) , 125 },
-{ OV(452) , 120 },
-{ OV(488) , 115 },
-{ OV(524) , 110 },
-{ OV(561) , 105 },
-{ OV(598) , 100 },
-{ OV(635) , 95 },
-{ OV(672) , 90 },
-{ OV(707) , 85 },
-{ OV(742) , 80 },
-{ OV(780) , 75 },
-{ OV(810) , 70 },
-{ OV(833) , 65 },
-{ OV(860) , 60 },
-{ OV(883) , 55 },
-{ OV(905) , 50 },
-{ OV(923) , 45 },
-{ OV(940) , 40 },
-{ OV(954) , 35 },
-{ OV(967) , 30 },
-{ OV(977) , 25 },
-{ OV(986) , 20 },
-{ OV(993) , 15 },
-{ OV(999) , 10 },
-{ OV(1004) , 5 },
-{ OV(1009) , 0 },
-{ OV(1012) , -5 },
-{ OV(1014) , -10 },
-{ OV(1016) , -15 },
-{ OV(1018) , -20 },
-{ OV(1019) , -25 },
-{ OV(1020) , -30 },
-{ OV(1021) , -35 },
-{ OV(1022) , -40 }
+ { OV( 2.00), 420 }, // Guestimate to ensure we dont lose a reading and drop temps to -50 when over
+ { OV( 12.07), 350 },
+ { OV( 12.79), 345 },
+ { OV( 13.59), 340 },
+ { OV( 14.44), 335 },
+ { OV( 15.37), 330 },
+ { OV( 16.38), 325 },
+ { OV( 17.46), 320 },
+ { OV( 18.63), 315 },
+ { OV( 19.91), 310 },
+ { OV( 21.29), 305 },
+ { OV( 22.79), 300 },
+ { OV( 24.43), 295 },
+ { OV( 26.21), 290 },
+ { OV( 28.15), 285 },
+ { OV( 30.27), 280 },
+ { OV( 32.58), 275 },
+ { OV( 35.10), 270 },
+ { OV( 38.44), 265 },
+ { OV( 40.89), 260 },
+ { OV( 44.19), 255 },
+ { OV( 47.83), 250 },
+ { OV( 51.80), 245 },
+ { OV( 56.20), 240 },
+ { OV( 61.00), 235 },
+ { OV( 66.30), 230 },
+ { OV( 72.11), 225 },
+ { OV( 78.51), 220 },
+ { OV( 85.57), 215 },
+ { OV( 93.34), 210 },
+ { OV( 101.91), 205 },
+ { OV( 111.34), 200 },
+ { OV( 121.73), 195 },
+ { OV( 133.17), 190 },
+ { OV( 145.74), 185 },
+ { OV( 159.57), 180 },
+ { OV( 174.73), 175 },
+ { OV( 191.35), 170 },
+ { OV( 209.53), 165 },
+ { OV( 229.35), 160 },
+ { OV( 250.90), 155 },
+ { OV( 274.25), 150 },
+ { OV( 299.46), 145 },
+ { OV( 326.52), 140 },
+ { OV( 355.44), 135 },
+ { OV( 386.15), 130 },
+ { OV( 418.53), 125 },
+ { OV( 452.43), 120 },
+ { OV( 487.62), 115 },
+ { OV( 523.82), 110 },
+ { OV( 560.70), 105 },
+ { OV( 597.88), 100 },
+ { OV( 634.97), 95 },
+ { OV( 671.55), 90 },
+ { OV( 707.21), 85 },
+ { OV( 741.54), 80 },
+ { OV( 779.65), 75 },
+ { OV( 809.57), 70 },
+ { OV( 833.40), 65 },
+ { OV( 859.55), 60 },
+ { OV( 883.27), 55 },
+ { OV( 904.53), 50 },
+ { OV( 923.38), 45 },
+ { OV( 939.91), 40 },
+ { OV( 954.26), 35 },
+ { OV( 966.59), 30 },
+ { OV( 977.08), 25 },
+ { OV( 985.92), 20 },
+ { OV( 993.39), 15 },
+ { OV( 999.42), 10 },
+ { OV(1004.43), 5 },
+ { OV(1008.51), 0 },
+ { OV(1011.79), -5 },
+ { OV(1014.40), -10 },
+ { OV(1016.48), -15 },
+ { OV(1018.10), -20 },
+ { OV(1019.35), -25 },
+ { OV(1020.32), -30 },
+ { OV(1021.05), -35 },
+ { OV(1021.60), -40 },
+ { OV(1022.01), -45 },
+ { OV(1022.31), -50 }
};
-
-
diff --git a/Marlin/src/module/thermistor/thermistors.h b/Marlin/src/module/thermistor/thermistors.h
index cc8ebcdf24..5529411f02 100644
--- a/Marlin/src/module/thermistor/thermistors.h
+++ b/Marlin/src/module/thermistor/thermistors.h
@@ -98,7 +98,7 @@
#if ANY_THERMISTOR_IS(60) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Maker's Tool Works Kapton Bed"
#include "thermistor_60.h"
#endif
-#if ANY_THERMISTOR_IS(61) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Formbot / Vivedino 350°C Thermistor"
+#if ANY_THERMISTOR_IS(61) // beta25 = 3950 K, R25 = 100 kOhm, Pull-up = 4.7 kOhm, "Formbot 350°C Thermistor"
#include "thermistor_61.h"
#endif
#if ANY_THERMISTOR_IS(66) // beta25 = 4500 K, R25 = 2.5 MOhm, Pull-up = 4.7 kOhm, "DyzeDesign 500 °C Thermistor"
diff --git a/Marlin/src/module/tool_change.cpp b/Marlin/src/module/tool_change.cpp
index 81dbe9043f..2125736cf5 100644
--- a/Marlin/src/module/tool_change.cpp
+++ b/Marlin/src/module/tool_change.cpp
@@ -681,7 +681,7 @@ void tool_change(const uint8_t tmp_extruder, const float fr_mm_s/*=0.0*/, bool n
singlenozzle_temp[active_extruder] = thermalManager.target_temperature[0];
if (singlenozzle_temp[tmp_extruder] && singlenozzle_temp[tmp_extruder] != singlenozzle_temp[active_extruder]) {
thermalManager.setTargetHotend(singlenozzle_temp[tmp_extruder], 0);
- #if ENABLED(ULTRA_LCD)
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
thermalManager.set_heating_message(0);
#endif
(void)thermalManager.wait_for_hotend(0, false); // Wait for heating or cooling
diff --git a/Marlin/src/pins/pins.h b/Marlin/src/pins/pins.h
index 2b5d3fc2c7..6e39aa4694 100644
--- a/Marlin/src/pins/pins.h
+++ b/Marlin/src/pins/pins.h
@@ -100,6 +100,8 @@
#include "pins_BAM_DICE_DUE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE)
#include "pins_MKS_BASE.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
+#elif MB(MKS_BASE_14)
+ #include "pins_MKS_BASE_14.h" // ATmega2560 env:megaatmega2560
#elif MB(MKS_BASE_15)
#include "pins_MKS_BASE_15.h" // ATmega1280, ATmega2560 env:megaatmega1280 env:megaatmega2560
#elif MB(MKS_BASE_HEROIC)
@@ -156,6 +158,10 @@
#include "pins_RAMPS_CREALITY.h" // ATmega2560 env:megaatmega2560
#elif MB(FYSETC_F6_13)
#include "pins_FYSETC_F6_13.h" // ATmega2560 env:megaatmega2560
+#elif MB(DUPLICATOR_I3_PLUS)
+ #include "pins_DUPLICATOR_I3_PLUS.h" // ATmega2560 env:megaatmega2560
+#elif MB(VORON)
+ #include "pins_VORON.h" // ATmega2560 env:megaatmega2560
//
// Other ATmega1280, ATmega2560
@@ -175,7 +181,7 @@
#include "pins_MEGATRONICS.h" // ATmega2560 env:megaatmega2560
#elif MB(MEGATRONICS_2)
#include "pins_MEGATRONICS_2.h" // ATmega2560 env:megaatmega2560
-#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31)
+#elif MB(MEGATRONICS_3) || MB(MEGATRONICS_31) || MB(MEGATRONICS_32)
#include "pins_MEGATRONICS_3.h" // ATmega2560 env:megaatmega2560
#elif MB(RAMBO)
#include "pins_RAMBO.h" // ATmega2560 env:rambo
@@ -318,6 +324,10 @@
#include "pins_COHESION3D_MINI.h" // LPC1769 env:LPC1769
#elif MB(SMOOTHIEBOARD)
#include "pins_SMOOTHIEBOARD.h" // LPC1769 env:LPC1769
+#elif MB(BIQU_SKR_V1_1)
+ #include "pins_BIQU_SKR_V1.1.h" // LPC1768 env:LPC1768
+#elif MB(BIQU_B300_V1_0)
+ #include "pins_BIQU_B300_V1.0.h" // LPC1768 env:LPC1768
//
// Other 32-bit Boards
@@ -392,6 +402,8 @@
#include "pins_GTM32_PRO_VB.h" // STM32F1 env:STM32F1
#elif MB(MORPHEUS)
#include "pins_MORPHEUS.h" // STM32F1 env:STM32F1
+#elif MB(MKS_ROBIN)
+ #include "pins_MKS_ROBIN.h" // STM32F1 env:STM32F1
//
// STM32 ARM Cortex-M4F
diff --git a/Marlin/src/pins/pins_BIQU_B300_V1.0.h b/Marlin/src/pins/pins_BIQU_B300_V1.0.h
new file mode 100644
index 0000000000..821483db2d
--- /dev/null
+++ b/Marlin/src/pins/pins_BIQU_B300_V1.0.h
@@ -0,0 +1,183 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * BIQU BQ111-A4
+ *
+ * Applies to the following boards:
+ *
+ * BOARD_BIQU_BQ111_A4 (Hotend, Fan, Bed)
+ *
+ */
+
+#ifndef TARGET_LPC1768
+ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
+#endif
+
+#ifndef BOARD_NAME
+ #define BOARD_NAME "BIQU Thunder B300 V1.0"
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_24 // 10k pullup to 3.3V, 1K series
+#define X_MAX_PIN P1_25 // 10k pullup to 3.3V, 1K series
+#define Y_MIN_PIN P1_26 // 10k pullup to 3.3V, 1K series
+#define Y_MAX_PIN P1_27 // 10k pullup to 3.3V, 1K series
+#define Z_MIN_PIN P1_28 // 10k pullup to 3.3V, 1K series
+#define Z_MAX_PIN P1_29 // 10k pullup to 3.3V, 1K series
+
+
+//
+// Steppers
+//
+#define X_STEP_PIN P2_00
+#define X_DIR_PIN P0_05
+#define X_ENABLE_PIN P0_04
+#ifndef X_CS_PIN
+ #define X_CS_PIN P1_15 // ETH
+#endif
+
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P0_11
+#define Y_ENABLE_PIN P0_10
+#ifndef Y_CS_PIN
+ #define Y_CS_PIN P1_14 // ETH
+#endif
+
+#define Z_STEP_PIN P2_02
+#define Z_DIR_PIN P0_20
+#define Z_ENABLE_PIN P0_19
+#ifndef Z_CS_PIN
+ #define Z_CS_PIN P1_16 // ETH
+#endif
+
+#define E0_STEP_PIN P2_03
+#define E0_DIR_PIN P0_22
+#define E0_ENABLE_PIN P0_21
+#ifndef E0_CS_PIN
+ #define E0_CS_PIN P1_17 // ETH
+#endif
+
+
+//
+// Software SPI pins for TMC2130 stepper drivers
+//
+#if ENABLED(TMC_USE_SW_SPI)
+ #define TMC_SW_MOSI P0_18 // ETH
+ #define TMC_SW_MISO P0_17 // ETH
+ #define TMC_SW_SCK P0_15 // ETH
+#endif
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_0_PIN 1 // A0 (T0)
+#define TEMP_BED_PIN 0 // A1 (T1)
+
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN P2_07
+#define HEATER_BED_PIN P2_05
+#ifndef FAN_PIN
+ #define FAN_PIN P2_04
+#endif
+
+//
+// Unused
+//
+//#define PIN_P2_10 P2_10 // IBOOT-1
+//#define PIN_P0_27 P0_27 // Onboard SD Detect
+
+/**
+ * LCD / Controller
+ *
+ * REPRAP_DISCOUNT_SMART_CONTROLLER is not supported due to the lack of LCD_PINS_D5,
+ * LCD_PINS_D6 or LCD_PINS_D7 in the EXP1 connector.
+ *
+ * A remote SD card is not supported as the pins routed to EXP2 are the same as used
+ * for the onboard SD card, and a chip select signal is not provided for the remote
+ * SD card.
+ */
+#if ENABLED(ULTRA_LCD)
+
+ #define BEEPER_PIN P1_31 // EXP1-1
+
+ #define BTN_EN1 P3_26 // EXP2-3
+ #define BTN_EN2 P3_25 // EXP2-5
+ #define BTN_ENC P1_30 // EXP1-2
+
+ #define SD_DETECT_PIN P0_27 // EXP2-7
+ #define LCD_PINS_RS P0_16 // EXP1-4
+ #define LCD_PINS_ENABLE P0_18 // (MOSI) EXP1-3
+ #define LCD_PINS_D4 P0_15 // (SCK) EXP1-5
+
+ #if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) && DISABLED(DOGLCD)
+ #error "REPRAP_DISCOUNT_SMART_CONTROLLER is not supported by the BIQU BQ111-A4"
+ #endif
+
+ #if ENABLED(SDSUPPORT)
+ #error "SDSUPPORT is not supported by the BIQU BQ111-A4 when an LCD controller is used"
+ #endif
+
+#endif // ULTRA_LCD
+
+/**
+ * SD Card Reader
+ *
+ * Software SPI is used to interface with a stand-alone SD card reader connected to EXP1.
+ * Hardware SPI can't be used because P0_17 (MISO) is not brought out on this board.
+ */
+#if ENABLED(SDSUPPORT)
+
+ #define SCK_PIN P0_15 // EXP1-5
+ #define MISO_PIN P0_16 // EXP1-4
+ #define MOSI_PIN P0_18 // EXP1-3
+ #define SS_PIN P1_30 // EXP1-2
+ #define SDSS SS_PIN
+
+#endif // SDSUPPORT
+
+/**
+ * PWMS
+ *
+ * There are 6 PWMS. Each PWM can be assigned to one of two pins.
+ *
+ * PWM1.1 P0_18 LCD_PINS_ENABLE
+ * PWM1.1 P2_0 X_STEP_PIN
+ * PWM1.2 P1_20
+ * PWM1.2 P2_1 Y_STEP_PIN
+ * PWM1.3 P1_21
+ * PWM1.3 P2_2 Z_STEP_PIN
+ * PWM1.4 P1_23
+ * PWM1.4 P2_3 E0_STEP_PIN
+ * PWM1.5 P1_24 X_MIN_PIN
+ * PWM1.5 P2_4 FAN_PIN
+ * PWM1.6 P1_26 Y_MIN_PIN
+ * PWM1.6 P2_5 HEATER_BED_PIN
+ */
diff --git a/Marlin/src/pins/pins_BIQU_SKR_V1.1.h b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h
new file mode 100644
index 0000000000..3ff9d1b21b
--- /dev/null
+++ b/Marlin/src/pins/pins_BIQU_SKR_V1.1.h
@@ -0,0 +1,233 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * Copyright (C) 2017 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+#ifndef TARGET_LPC1768
+ #error "Oops! Make sure you have the LPC1768 environment selected in your IDE."
+#endif
+
+#ifndef BOARD_NAME
+ #define BOARD_NAME "BIQU SKR V1.1"
+#endif
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN P1_29
+#define X_MAX_PIN P1_28
+#define Y_MIN_PIN P1_27
+#define Y_MAX_PIN P1_26
+#define Z_MIN_PIN P1_25
+#define Z_MAX_PIN P1_24
+
+//
+// Steppers
+//
+#define X_STEP_PIN P0_04
+#define X_DIR_PIN P0_05
+#define X_ENABLE_PIN P4_28
+
+#define Y_STEP_PIN P2_01
+#define Y_DIR_PIN P2_02
+#define Y_ENABLE_PIN P2_00
+
+#define Z_STEP_PIN P0_20
+#define Z_DIR_PIN P0_21
+#define Z_ENABLE_PIN P0_19
+
+#define E0_STEP_PIN P0_11
+#define E0_DIR_PIN P2_13
+#define E0_ENABLE_PIN P2_12
+
+#define E1_STEP_PIN P0_01
+#define E1_DIR_PIN P0_00
+#define E1_ENABLE_PIN P0_10
+
+//
+// Temperature Sensors
+// 3.3V max when defined as an analog input
+//
+#define TEMP_BED_PIN 0 // A0 (T0) - (67) - TEMP_BED_PIN
+#define TEMP_0_PIN 1 // A1 (T1) - (68) - TEMP_0_PIN
+#define TEMP_1_PIN 2 // A2 (T2) - (69) - TEMP_1_PIN
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN P2_07
+#if HOTENDS == 1
+ #define FAN1_PIN P2_04
+#else
+ #define HEATER_1_PIN P2_04
+#endif
+#define FAN_PIN P2_03
+#define HEATER_BED_PIN P2_05
+
+//
+// Misc. Functions
+//
+#define SDSS P1_23 // (53)
+
+/**
+ * LCD / Controller
+ *
+ * All controllers can use J3 and J5 on the Re-ARM board. Custom cabling will be required.
+ */
+
+/**
+ * Smart LCD adapter
+ *
+ * The Smart LCD adapter can be used for the two 10 pin LCD controllers such as
+ * REPRAP_DISCOUNT_SMART_CONTROLLER. It can't be used for controllers that use
+ * DOGLCD_A0, DOGLCD_CS, LCD_PINS_D5, LCD_PINS_D6 or LCD_PINS_D7. A custom cable
+ * is needed to pick up 5V for the EXP1 connection.
+ *
+ * SD card on the LCD uses the same SPI signals as the LCD. This results in garbage/lines
+ * on the LCD display during accesses of the SD card. The menus/code has been arranged so
+ * that the garbage/lines are erased immediately after the SD card accesses are completed.
+ */
+
+#if ENABLED(ULTRA_LCD)
+
+ #if ENABLED(CR10_STOCKDISPLAY)
+
+ // Re-Arm can support Creality stock display without SD card reader and single cable on EXP3.
+ // Re-Arm J3 pins 1 (p1.31) & 2 (P3.26) are not used. Stock cable will need to have one
+ // 10-pin IDC connector trimmed or replaced with a 12-pin IDC connector to fit J3.
+ // Requires REVERSE_ENCODER_DIRECTION in Configuration.h
+
+ #define BEEPER_PIN P2_11 // J3-3 & AUX-4
+
+ #define BTN_EN1 P0_16 // J3-7 & AUX-4
+ #define BTN_EN2 P1_23 // J3-5 & AUX-4
+ #define BTN_ENC P3_25 // J3-4 & AUX-4
+
+ #define LCD_PINS_RS P0_15 // J3-9 & AUX-4 (CS)
+ #define LCD_PINS_ENABLE P0_18 // J3-10 & AUX-3 (SID, MOSI)
+ #define LCD_PINS_D4 P2_06 // J3-8 & AUX-3 (SCK, CLK)
+
+ #else
+
+ #define BEEPER_PIN P1_30 // (37) not 5V tolerant
+
+ #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
+ #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
+ #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
+
+ #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
+ #define LCD_PINS_RS P0_16 // (16) J3-7 & AUX-4
+ #define LCD_SDSS P0_16 // (16) J3-7 & AUX-4
+
+ #if ENABLED(REPRAPWORLD_KEYPAD)
+ #define SHIFT_OUT P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define SHIFT_CLK P0_15 // (52) (SCK) J3-9 & AUX-3
+ #define SHIFT_LD P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #elif DISABLED(NEWPANEL)
+ //#define SHIFT_CLK P3_26 // (31) J3-2 & AUX-4
+ //#define SHIFT_LD P3_25 // (33) J3-4 & AUX-4
+ //#define SHIFT_OUT P2_11 // (35) J3-3 & AUX-4
+ //#define SHIFT_EN P1_22 // (41) J5-4 & AUX-4
+ #endif
+
+ #if ENABLED(VIKI2) || ENABLED(miniVIKI)
+ // #define LCD_SCREEN_ROT_180
+
+ #define BTN_EN1 P3_26 // (31) J3-2 & AUX-4
+ #define BTN_EN2 P3_25 // (33) J3-4 & AUX-4
+ #define BTN_ENC P2_11 // (35) J3-3 & AUX-4
+
+ #define SD_DETECT_PIN P1_31 // (49) not 5V tolerant J3-1 & AUX-3
+ #define KILL_PIN P1_22 // (41) J5-4 & AUX-4
+
+ #define DOGLCD_CS P0_16 // (16)
+ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
+ #define DOGLCD_SCK SCK_PIN
+ #define DOGLCD_MOSI MOSI_PIN
+
+ #define STAT_LED_BLUE_PIN P0_26 // (63) may change if cable changes
+ #define STAT_LED_RED_PIN P1_21 // ( 6) may change if cable changes
+ #else
+ #define DOGLCD_CS P0_26 // (63) J5-3 & AUX-2
+ #define DOGLCD_A0 P2_06 // (59) J3-8 & AUX-2
+ #define LCD_BACKLIGHT_PIN P0_16 // (16) J3-7 & AUX-4 - only used on DOGLCD controllers
+ #define LCD_PINS_ENABLE P0_18 // (51) (MOSI) J3-10 & AUX-3
+ #define LCD_PINS_D4 P0_15 // (52) (SCK) J3-9 & AUX-3
+ #if ENABLED(ULTIPANEL)
+ #define LCD_PINS_D5 P1_17 // (71) ENET_MDIO
+ #define LCD_PINS_D6 P1_14 // (73) ENET_RX_ER
+ #define LCD_PINS_D7 P1_10 // (75) ENET_RXD1
+ #endif
+ #endif
+
+ //#define MISO_PIN P0_17 // (50) system defined J3-10 & AUX-3
+ //#define MOSI_PIN P0_18 // (51) system defined J3-10 & AUX-3
+ //#define SCK_PIN P0_15 // (52) system defined J3-9 & AUX-3
+ //#define SS_PIN P1_23 // (53) system defined J3-5 & AUX-3 - sometimes called SDSS
+
+ #if ENABLED(MINIPANEL)
+ // GLCD features
+ //#define LCD_CONTRAST 190
+ // Uncomment screen orientation
+ //#define LCD_SCREEN_ROT_90
+ //#define LCD_SCREEN_ROT_180
+ //#define LCD_SCREEN_ROT_270
+ #endif
+
+ #endif
+
+#endif // ULTRA_LCD
+
+//
+// SD Support (as with the AZTEEG_X5_MINI_WIFI)
+//
+//#define USB_SD_DISABLED // Disable host access to SD card as mass storage device through USB
+#define USB_SD_ONBOARD // Enable host access to SD card as mass storage device through USB
+
+//#define LPC_SD_LCD // Marlin uses the SD drive attached to the LCD
+#define LPC_SD_ONBOARD // Marlin uses the SD drive on the control board. There is no SD detect pin
+ // for the onboard card. Init card from LCD menu or send M21 whenever printer
+ // is powered on to enable SD access.
+
+#if ENABLED(LPC_SD_LCD)
+
+ #define SCK_PIN P0_15
+ #define MISO_PIN P0_17
+ #define MOSI_PIN P0_18
+ #define SS_PIN P1_23 // Chip select for SD card used by Marlin
+ #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
+
+#elif ENABLED(LPC_SD_ONBOARD)
+
+ #if ENABLED(USB_SD_ONBOARD)
+ // When sharing the SD card with a PC we want the menu options to
+ // mount/unmount the card and refresh it. So we disable card detect.
+ #define SHARED_SD_CARD
+ #undef SD_DETECT_PIN // there is also no detect pin for the onboard card
+ #endif
+ #define SCK_PIN P0_07
+ #define MISO_PIN P0_08
+ #define MOSI_PIN P0_09
+ #define SS_PIN P0_06 // Chip select for SD card used by Marlin
+ #define ONBOARD_SD_CS P0_06 // Chip select for "System" SD card
+
+#endif
diff --git a/Marlin/src/pins/pins_CHEAPTRONIC.h b/Marlin/src/pins/pins_CHEAPTRONIC.h
index 65e81ae45d..34faccb6cf 100644
--- a/Marlin/src/pins/pins_CHEAPTRONIC.h
+++ b/Marlin/src/pins/pins_CHEAPTRONIC.h
@@ -77,10 +77,3 @@
// LCD / Controller
//
// Cheaptronic v1.0 doesn't support LCD
-#define LCD_PINS_RS -1
-#define LCD_PINS_ENABLE -1
-
-// Cheaptronic v1.0 doesn't support keypad
-#define BTN_EN1 -1
-#define BTN_EN2 -1
-#define BTN_ENC -1
diff --git a/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
new file mode 100644
index 0000000000..d66ce05e25
--- /dev/null
+++ b/Marlin/src/pins/pins_DUPLICATOR_I3_PLUS.h
@@ -0,0 +1,183 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * Wanhao Duplicator i3 Plus pin assignments
+ */
+
+#ifndef __AVR_ATmega2560__
+ #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
+#endif
+
+#define BOARD_NAME "Duplicator i3 Plus"
+
+//
+// Limit Switches
+//
+#define X_STOP_PIN 54 // PF0 / A0
+#define Y_STOP_PIN 24 // PA2 / AD2
+#define Z_MIN_PIN 23 // PA1 / AD1
+#define Z_MAX_PIN 25 // PA3 / AD3
+#define SERVO0_PIN 40 // PG1 / !RD
+
+//
+// Steppers
+//
+#define X_STEP_PIN 61 // PF7 / A7
+#define X_DIR_PIN 62 // PK0 / A8
+#define X_ENABLE_PIN 60 // PF6 / A6
+
+#define Y_STEP_PIN 64 // PK2 / A10
+#define Y_DIR_PIN 65 // PK3 / A11
+#define Y_ENABLE_PIN 63 // PK1 / A9
+
+#define Z_STEP_PIN 67 // PK5 / A13
+#define Z_DIR_PIN 69 // PK7 / A15
+#define Z_ENABLE_PIN 66 // PK4 / A12
+#define Z_MIN_PROBE_PIN 25 // PA3 / AD3
+
+#define E0_STEP_PIN 58 // PF4 / A4
+#define E0_DIR_PIN 59 // PF5 / A5
+#define E0_ENABLE_PIN 57 // PF3 / A3
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN 1 // PF1 / A1 Analog
+#define TEMP_BED_PIN 14 // PK6 / A14 Analog
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN 4 // PG5 / PWM4
+#define HEATER_BED_PIN 3 // PE5 / PWM3
+
+#define FAN_PIN 5 // PE3 / PWM5
+
+//
+// Misc. Functions
+//
+#define SDSS 53 // PB0 / SS
+#define LED_PIN 13 // PB7 / PWM13
+
+#define MISO_PIN 50 // PB3
+#define MOSI_PIN 51 // PB2
+#define SCK_PIN 52 // PB1
+
+//
+// LCDs and Controllers
+//
+#if ENABLED(ULTRA_LCD)
+ #if ENABLED(ZONESTAR_LCD)
+ #define LCD_PINS_RS 2
+ #define LCD_PINS_ENABLE 36
+ #define LCD_PINS_D4 37
+ #define LCD_PINS_D5 34
+ #define LCD_PINS_D6 35
+ #define LCD_PINS_D7 32
+ #define ADC_KEYPAD_PIN 12 // Analog
+ #endif
+#endif
+
+/**
+ * == EXT connector ==
+ *
+ * 2 4 6 8 10
+ * #---------------#
+ * #2 | ° ° ° ° ° |
+ * #1 | ° ° ° ° ° |
+ * #---------------#
+ * 1 3 5 7 9
+ *
+ * ##################################
+ * # Pin | ATMEGA2560 Pin | Arduino #
+ * ##################################
+ * # 1 | 52 / PG1 (!RD) | 40 #
+ * # 2 | 95 / PF2 (A2) | 2 #
+ * # 3 | 54 / PC1 (A9) | 36 #
+ * # 4 | 53 / PC0 (A8) | 37 #
+ * # 5 | 56 / PC3 (A11) | 34 #
+ * # 6 | 55 / PC2 (A10) | 35 #
+ * # 7 | 58 / PC5 (A13) | 32 #
+ * # 8 | 57 / PC4 (A12) | 33 #
+ * # 9 | GND | - #
+ * # 10 | VCC | + #
+ * ##################################
+ *
+ * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ *
+ * == Z-probe connector ==
+ *
+ * 1 2 3
+ * #---------#
+ * | ° ° ° |
+ * #---------#
+ *
+ * ##################################
+ * # Pin | ATMEGA2560 Pin | Arduino #
+ * ##################################
+ * # 1 | 24V or 5V | + #
+ * # 2 | 75 / PA3 (AD3) | 25 #
+ * # 3 | GND | - #
+ * ##################################
+ *
+ * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ *
+ * == Y-endstop == == Z-endstop == == Bed temperature ==
+ *
+ * 1 2 1 2 1 2
+ * #------# #------# #------#
+ * | ° ° | | ° ° | | ° ° |
+ * #------# #------# #------#
+ *
+ * ############### Y ################ ############### Z ################ ############## BED ###############
+ * # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino # # Pin | ATMEGA2560 Pin | Arduino #
+ * ################################## ################################## ##################################
+ * # 1 | GND | - # # 1 | GND | - # # 1 | GND | - #
+ * # 2 | 76 / PA2 (AD2) | 24 # # 2 | 77 / PA1 (AD1) | 23 # # 2 |83 / PK6 (ADC14)| 14 #
+ * ################################## ################################## ##################################
+ *
+ * @@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@@
+ *
+ * == SPI connector ==
+ *
+ * 5 3 1
+ * #---------#
+ * | ° ° ° |
+ * | ° ° ° |
+ * #---------#
+ * 6 4 2
+ *
+ * ##################################
+ * # Pin | ATMEGA2560 Pin | Arduino #
+ * ##################################
+ * # 1 | 22 / PB3 (MISO)| 50 #
+ * # 2 | VCC | + #
+ * # 3 | 20 / PB1 (SCK) | 52 #
+ * # 4 | 21 / PB2 (MOSI)| 51 #
+ * # 5 | 30 / !RESET | RESET #
+ * # 6 | GND | - #
+ * ##################################
+ *
+ * Pictogram by Ludy https://github.com/Ludy87
+ * See: https://sebastien.andrivet.com/en/posts/wanhao-duplicator-i3-plus-3d-printer/
+ */
diff --git a/Marlin/src/pins/pins_FORMBOT_TREX3.h b/Marlin/src/pins/pins_FORMBOT_TREX3.h
index 07d92cd326..dde947e3a6 100644
--- a/Marlin/src/pins/pins_FORMBOT_TREX3.h
+++ b/Marlin/src/pins/pins_FORMBOT_TREX3.h
@@ -125,10 +125,10 @@
//
#define HEATER_0_PIN 10
#define HEATER_1_PIN 7
-#define HEATER_BED_PIN 8
+#define HEATER_BED_PIN 8
#define FAN_PIN 9
-#define FAN1_PIN 12
+#define FAN1_PIN 12
#define NUM_RUNOUT_SENSORS 2
#define FIL_RUNOUT_PIN 23
diff --git a/Marlin/src/pins/pins_FYSETC_F6_13.h b/Marlin/src/pins/pins_FYSETC_F6_13.h
index d343e82f5e..c97aea6444 100644
--- a/Marlin/src/pins/pins_FYSETC_F6_13.h
+++ b/Marlin/src/pins/pins_FYSETC_F6_13.h
@@ -30,6 +30,9 @@
#define BOARD_NAME "FYSETC F6 1.3"
+#define RESET_PIN 30
+#define SPI_FLASH_CS 83
+
//
// Servos
//
@@ -109,12 +112,6 @@
// the jumper next to the limit switch socket when using sensorless homing.
//
-#define X_TMC2130_DIAG -1
-#define Y_TMC2130_DIAG -1
-#define Z_TMC2130_DIAG -1
-#define E0_TMC2130_DIAG -1
-#define E1_TMC2130_DIAG -1
-#define E2_TMC2130_DIAG -1
#if HAS_DRIVER(TMC2208)
// Software serial
@@ -129,7 +126,7 @@
#define E1_SERIAL_RX_PIN 80
#define E1_SERIAL_TX_PIN 81
#define E2_SERIAL_RX_PIN 22
- #define E2_SERIAL_TX_PIN 83
+ #define E2_SERIAL_TX_PIN 82
#endif
//
@@ -197,4 +194,9 @@
#define BTN_EN1 31
#define BTN_EN2 33
#define BTN_ENC 35
+
+ #if ENABLED(MKS_MINI_12864)
+ #define DOGLCD_A0 27
+ #define DOGLCD_CS 25
+ #endif
#endif
diff --git a/Marlin/src/pins/pins_GTM32_PRO_VB.h b/Marlin/src/pins/pins_GTM32_PRO_VB.h
index 1914db0b43..852f3547d6 100644
--- a/Marlin/src/pins/pins_GTM32_PRO_VB.h
+++ b/Marlin/src/pins/pins_GTM32_PRO_VB.h
@@ -84,7 +84,7 @@
#define HEATER_2_PIN PB4
#define HEATER_BED_PIN PB1
-#define FAN0_PIN PB7 // TODO: Add functionality
+#define FAN_PIN PB7 // TODO: Add functionality
#define FAN1_PIN PB8 // TODO: Add functionality
#define FAN2_PIN PB9 // TODO: Add functionality
diff --git a/Marlin/src/pins/pins_MEGATRONICS_3.h b/Marlin/src/pins/pins_MEGATRONICS_3.h
index 51c5c6a878..5a5b901413 100644
--- a/Marlin/src/pins/pins_MEGATRONICS_3.h
+++ b/Marlin/src/pins/pins_MEGATRONICS_3.h
@@ -21,14 +21,16 @@
*/
/**
- * MegaTronics v3.0 / v3.1 pin assignments
+ * MegaTronics v3.0 / v3.1 / v3.2 pin assignments
*/
#ifndef __AVR_ATmega2560__
#error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
#endif
-#if MB(MEGATRONICS_31)
+#if MB(MEGATRONICS_32)
+ #define BOARD_NAME "Megatronics v3.2"
+#elif MB(MEGATRONICS_31)
#define BOARD_NAME "Megatronics v3.1"
#else
#define BOARD_NAME "Megatronics v3.0"
@@ -161,7 +163,7 @@
#define SHIFT_OUT 34
#define SHIFT_EN 44
- #if MB(MEGATRONICS_31)
+ #if MB(MEGATRONICS_31) || MB(MEGATRONICS_32)
#define SD_DETECT_PIN 56
#endif
diff --git a/Marlin/src/pins/pins_MKS_BASE_14.h b/Marlin/src/pins/pins_MKS_BASE_14.h
new file mode 100644
index 0000000000..75d42a44d4
--- /dev/null
+++ b/Marlin/src/pins/pins_MKS_BASE_14.h
@@ -0,0 +1,176 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * MKS BASE v1.4
+ */
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+ #error "MKS BASE 1.4 only supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_NAME "MKS BASE 1.4"
+
+//
+// Heaters / Fans
+//
+#define MOSFET_D_PIN 7 // PH4 ** Pin16 ** PWM7 //E1
+#define FAN_PIN 9 // PH6 ** Pin18 ** PWM9
+
+// Other Mods
+#define CASE_LIGHT_PIN 11 // PB5 ** Pin24 ** PWM11
+#define SERVO3_PIN 12 // PB6 ** Pin25 ** D12
+#define PS_ON_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
+#define FILWIDTH_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
+#define FIL_RUNOUT_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
+
+//
+// M3/M4/M5 - Spindle/Laser Control
+//
+#define SPINDLE_LASER_PWM_PIN 2 // X+ // PE4 ** Pin6 ** PWM2 **MUST BE HARDWARE PWM
+#define SPINDLE_LASER_ENABLE_PIN 15 // Y+ // PJ0 ** Pin63 ** USART3_RX **Pin should have a pullup!
+#define SPINDLE_DIR_PIN 19 // Z+ // PD2 ** Pin45 ** USART1_RX
+
+//
+// Microstepping pins
+//
+#define X_MS1_PIN 5 // PE3 ** Pin5 ** PWM5
+#define X_MS2_PIN 6 // PH3 ** Pin15 ** PWM6
+#define Y_MS1_PIN 59 // PF5 ** Pin92 ** A5
+#define Y_MS2_PIN 58 // PF4 ** Pin93 ** A4
+#define Z_MS1_PIN 22 // PA0 ** Pin78 ** D22
+#define Z_MS2_PIN 39 // PG2 ** Pin70 ** D39
+#define E0_MS1_PIN 64 // PK2 ** Pin87 ** A10
+#define E0_MS2_PIN 63 // PK1 ** Pin88 ** A9
+#define E1_MS1_PIN 57 // PF3 ** Pin94 ** A3
+#define E1_MS2_PIN 4 // PG5 ** Pin1 ** PWM4
+
+#include "pins_RAMPS.h"
+
+/*
+ Available connectors on MKS BASE v1.4
+
+ =======
+ | GND |
+ |-----| E0
+ | 10 | (10) PB4 ** Pin23 ** PWM10
+ |-----|
+ | GND |
+ |-----| E1
+ | 7 | ( 7) PH4 ** Pin16 ** PWM7
+ |-----|
+ | GND |
+ |-----| FAN
+ | 9 | ( 9) PH6 ** Pin18 ** PWM9
+ =======
+
+ =======
+ | GND |
+ |-----| Heated Bed
+ | 8 | ( 8) PH5 ** Pin17 ** PWM8
+ =======
+
+ ==========
+ | 12-24V |
+ |--------| Power
+ | GND |
+ ==========
+
+ XS3 Connector
+ =================
+ | 65 | GND | 5V | (65) PK3 ** Pin86 ** A11
+ |----|-----|----|
+ | 66 | GND | 5V | (66) PK4 ** Pin85 ** A12
+ =================
+
+ Servos Connector
+ =================
+ | 11 | GND | 5V | (11) PB5 ** Pin24 ** PWM11
+ |----|-----|----|
+ | 12 | GND | 5V | (12) PB6 ** Pin25 ** PWM12
+ =================
+
+ ICSP
+ =================
+ | 5V | 51 | GND | (51) PB2 ** Pin21 ** SPI_MOSI
+ |----|----|-----|
+ | 50 | 52 | RST | (50) PB3 ** Pin22 ** SPI_MISO
+ ================= (52) PB1 ** Pin20 ** SPI_SCK
+
+ XS6/AUX-1 Connector
+ ======================
+ | 5V | GND | NC | 20 | (20) PD1 ** Pin44 ** I2C_SDA
+ |----|-----|----|----|
+ | 50 | 51 | 52 | 21 | (50) PB3 ** Pin22 ** SPI_MISO
+ ====================== (51) PB2 ** Pin21 ** SPI_MOSI
+ (52) PB1 ** Pin20 ** SPI_SCK
+ (21) PD0 ** Pin43 ** I2C_SCL
+
+ Temperature
+ ==================================
+ | GND | 69 | GND | 68 | GND | 67 |
+ ==================================
+ (69) PK7 ** Pin82 ** A15
+ (68) PK6 ** Pin83 ** A14
+ (67) PK5 ** Pin84 ** A13
+
+ Limit Switches
+ ============
+ | 2 | GND | X+ ( 2) PE4 ** Pin6 ** PWM2
+ |----|-----|
+ | 3 | GND | X- ( 3) PE5 ** Pin7 ** PWM3
+ |----|-----|
+ | 15 | GND | Y+ (15) PJ0 ** Pin63 ** USART3_RX
+ |----|-----|
+ | 14 | GND | Y- (14) PJ1 ** Pin64 ** USART3_TX
+ |----|-----|
+ | 19 | GND | Z+ (19) PD2 ** Pin45 ** USART1_RX
+ |----|-----|
+ | 18 | GND | Z- (18) PD3 ** Pin46 ** USART1_TX
+ ============
+
+ EXP1
+ ============
+ | 37 | 35 | (37) PC0 ** Pin53 ** D37
+ |-----|----| (35) PC2 ** Pin55 ** D35
+ | 17 | 16 | (17) PH0 ** Pin12 ** USART2_RX
+ |-----|----| (16) PH1 ** Pin13 ** USART2_TX
+ | 23 | 25 | (23) PA1 ** Pin77 ** D23
+ |-----|----| (25) PA3 ** Pin75 ** D25
+ | 27 | 29 | (27) PA5 ** Pin73 ** D27
+ |-----|----| (29) PA7 ** Pin71 ** D29
+ | GND | 5V |
+ ============
+
+ EXP2
+ ============
+ | 50 | 52 | (50) PB3 ** Pin22 ** SPI_MISO
+ |-----|----| (52) PB1 ** Pin20 ** SPI_SCK
+ | 31 | 53 | (31) PC6 ** Pin59 ** D31
+ |-----|----| (53) PB0 ** Pin19 ** SPI_SS
+ | 33 | 51 | (33) PC4 ** Pin57 ** D33
+ |-----|----| (51) PB2 ** Pin21 ** SPI_MOSI
+ | 49 | 41 | (49) PL0 ** Pin35 ** D49
+ |-----|----| (41) PG0 ** Pin51 ** D41
+ | GND | NC |
+ ============
+*/
diff --git a/Marlin/src/pins/pins_MKS_ROBIN.h b/Marlin/src/pins/pins_MKS_ROBIN.h
new file mode 100644
index 0000000000..e71f374531
--- /dev/null
+++ b/Marlin/src/pins/pins_MKS_ROBIN.h
@@ -0,0 +1,125 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * MKS Robin (STM32F130ZET6) board pin assignments
+ */
+
+#ifndef __STM32F1__
+ #error "Oops! Select an STM32F1 board in 'Tools > Board.'"
+#endif
+
+#if HOTENDS > 2 || E_STEPPERS > 2
+ #error "MKS Robin supports up to 2 hotends / E-steppers. Comment out this line to continue."
+#endif
+
+#define BOARD_NAME "MKS Robin"
+
+//
+// Release PB4 (Y_ENABLE_PIN) from JTAG NRST role
+//
+#define DISABLE_DEBUG
+
+//
+// Servos
+//
+#define SERVO0_PIN PC3 // XS1 - 5
+#define SERVO1_PIN PA1 // XS1 - 6
+#define SERVO2_PIN PF9 // XS2 - 5
+#define SERVO3_PIN PF8 // XS2 - 6
+
+//
+// Limit Switches
+//
+#define X_MIN_PIN PB12
+#define X_MAX_PIN PB0
+#define Y_MIN_PIN PC5
+#define Y_MAX_PIN PC4
+#define Z_MIN_PIN PA4
+#define Z_MAX_PIN PF7
+
+//
+// Steppers
+//
+#define X_ENABLE_PIN PB9
+#define X_STEP_PIN PB8
+#define X_DIR_PIN PB5
+
+#define Y_ENABLE_PIN PB4
+#define Y_STEP_PIN PG15
+#define Y_DIR_PIN PG10
+
+#define Z_ENABLE_PIN PD7
+#define Z_STEP_PIN PD3
+#define Z_DIR_PIN PG14
+
+#define E0_ENABLE_PIN PG13
+#define E0_STEP_PIN PG8
+#define E0_DIR_PIN PA15
+
+#define E1_ENABLE_PIN PA12
+#define E1_STEP_PIN PA11
+#define E1_DIR_PIN PA8
+
+//
+// Temperature Sensors
+//
+#define TEMP_0_PIN PC1 // TH1
+#define TEMP_1_PIN PC2 // TH2
+#define TEMP_BED_PIN PC0 // TB1
+
+//
+// Heaters / Fans
+//
+#define HEATER_0_PIN PC7 // HEATER1
+#define HEATER_1_PIN PA6 // HEATER2
+#define HEATER_BED_PIN PC6 // HOT BED
+
+#define FAN_PIN PA7 // FAN
+
+/**
+ * Note: MKS Robin board is using SPI2 interface. Make sure your stm32duino library is configured accordingly
+ */
+//#define MAX6675_SS_PIN PE5 // TC1 - CS1
+//#define MAX6675_SS_PIN PE6 // TC2 - CS2
+
+#define POWER_LOSS_PIN PA2 // PW_DET
+#define PS_ON_PIN PA3 // PW_OFF
+#define FIL_RUNOUT_PIN PF11 // MT_DET
+
+#define BEEPER_PIN PC13
+#define LED_PIN PB2
+
+/**
+ * Note: MKS Robin TFT screens may have different TFT controllers
+ * If the screen stays white, disable 'LCD_RESET_PIN' to rely on the bootloader to do screen initialization.
+ *
+ * Enabling 'LCD_RESET_PIN' causes flickering when entering the LCD menu due to LCD controller reset.
+ * Reset feature was designed to "revive the LCD if static electricity killed it."
+ */
+//#define LCD_RESET_PIN PF6
+#define LCD_BACKLIGHT_PIN PG11
+#define FSMC_CS_PIN PG12 // NE4
+#define FSMC_RS_PIN PF0 // A0
+
+#define SD_DETECT_PIN PF12
+#define SDSS -1
diff --git a/Marlin/src/pins/pins_VORON.h b/Marlin/src/pins/pins_VORON.h
new file mode 100644
index 0000000000..9bcde033a8
--- /dev/null
+++ b/Marlin/src/pins/pins_VORON.h
@@ -0,0 +1,46 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+
+/**
+ * VORON Design v2 pin assignments
+ * See https://github.com/mzbotreprap/VORON/blob/master/Firmware/Marlin/pins_RAMPS_VORON.h
+ */
+
+#define BOARD_NAME "VORON Design v2"
+
+#define RAMPS_D8_PIN 11
+
+#include "pins_RAMPS.h"
+
+//
+// Heaters / Fans
+//
+#undef FAN_PIN
+#define FAN_PIN 5 // Using the pin for the controller fan since controller fan is always on.
+#define CONTROLLER_FAN_PIN 8
+#define ORIG_E0_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan
+#define ORIG_E1_AUTO_FAN_PIN 6 // Servo pin 6 for E3D Fan (same pin for both extruders since it's the same fan)
+
+//
+// LCDs and Controllers
+//
+#undef BEEPER_PIN
diff --git a/Marlin/src/sd/Sd2Card.cpp b/Marlin/src/sd/Sd2Card.cpp
index d1116cdb35..6b5acf6d34 100644
--- a/Marlin/src/sd/Sd2Card.cpp
+++ b/Marlin/src/sd/Sd2Card.cpp
@@ -30,7 +30,7 @@
#include "../inc/MarlinConfig.h"
-#if ENABLED(SDSUPPORT) && DISABLED(USB_FLASH_DRIVE_SUPPORT)
+#if ENABLED(SDSUPPORT) && DISABLED(USB_FLASH_DRIVE_SUPPORT) && DISABLED(SDIO_SUPPORT)
/* Enable FAST CRC computations - You can trade speed for FLASH space if
* needed by disabling the following define */
@@ -65,7 +65,7 @@
static uint8_t CRC7(const uint8_t* data, uint8_t n) {
uint8_t crc = 0;
- while ( n > 0 ) {
+ while (n > 0) {
crc = pgm_read_byte(&crctab7[ (crc << 1) ^ *data++ ]);
n--;
}
@@ -87,44 +87,42 @@
#endif
#endif
-// send command and return error code. Return zero for OK
-uint8_t Sd2Card::cardCommand(uint8_t cmd, uint32_t arg) {
- // select card
+// Send command and return error code. Return zero for OK
+uint8_t Sd2Card::cardCommand(const uint8_t cmd, const uint32_t arg) {
+ // Select card
chipSelect();
- // wait up to 300 ms if busy
- waitNotBusy( SD_WRITE_TIMEOUT );
+ // Wait up to 300 ms if busy
+ waitNotBusy(SD_WRITE_TIMEOUT);
uint8_t *pa = (uint8_t *)(&arg);
-#if ENABLED(SD_CHECK_AND_RETRY)
+ #if ENABLED(SD_CHECK_AND_RETRY)
- // form message
- uint8_t d[6] = {(uint8_t) (cmd | 0x40), pa[3], pa[2], pa[1], pa[0] };
+ // Form message
+ uint8_t d[6] = {(uint8_t) (cmd | 0x40), pa[3], pa[2], pa[1], pa[0] };
- // add crc
- d[5] = CRC7(d, 5);
+ // Add crc
+ d[5] = CRC7(d, 5);
- // send message
- for (uint8_t k = 0; k < 6; k++ )
- spiSend( d[k] );
+ // Send message
+ for (uint8_t k = 0; k < 6; k++) spiSend(d[k]);
-#else
- // send command
- spiSend(cmd | 0x40);
+ #else
+ // Send command
+ spiSend(cmd | 0x40);
- // send argument
- for( int8_t i = 3; i >= 0; i-- )
- spiSend( pa[i] );
+ // Send argument
+ for (int8_t i = 3; i >= 0; i--) spiSend(pa[i]);
- // send CRC - correct for CMD0 with arg zero or CMD8 with arg 0X1AA
- spiSend( cmd == CMD0 ? 0X95 : 0X87 );
-#endif
+ // Send CRC - correct for CMD0 with arg zero or CMD8 with arg 0X1AA
+ spiSend(cmd == CMD0 ? 0X95 : 0X87);
+ #endif
- // skip stuff byte for stop read
+ // Skip stuff byte for stop read
if (cmd == CMD12) spiRec();
- // wait for response
+ // Wait for response
for (uint8_t i = 0; ((status_ = spiRec()) & 0x80) && i != 0xFF; i++) { /* Intentionally left empty */ }
return status_;
}
@@ -159,9 +157,7 @@ uint32_t Sd2Card::cardSize() {
void Sd2Card::chipDeselect() {
digitalWrite(chipSelectPin_, HIGH);
-
- // insure MISO goes high impedance
- spiSend( 0xFF );
+ spiSend(0xFF); // Ensure MISO goes high impedance
}
void Sd2Card::chipSelect() {
@@ -195,13 +191,8 @@ bool Sd2Card::erase(uint32_t firstBlock, uint32_t lastBlock) {
goto FAIL;
}
}
- if (type_ != SD_CARD_TYPE_SDHC) {
- firstBlock <<= 9;
- lastBlock <<= 9;
- }
- if (cardCommand(CMD32, firstBlock)
- || cardCommand(CMD33, lastBlock)
- || cardCommand(CMD38, 0)) {
+ if (type_ != SD_CARD_TYPE_SDHC) { firstBlock <<= 9; lastBlock <<= 9; }
+ if (cardCommand(CMD32, firstBlock) || cardCommand(CMD33, lastBlock) || cardCommand(CMD38, 0)) {
error(SD_CARD_ERROR_ERASE);
goto FAIL;
}
@@ -236,7 +227,7 @@ bool Sd2Card::eraseSingleBlockEnable() {
* \return true for success, false for failure.
* The reason for failure can be determined by calling errorCode() and errorData().
*/
-bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) {
+bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD_CHIP_SELECT_PIN*/) {
errorCode_ = type_ = 0;
chipSelectPin_ = chipSelectPin;
// 16-bit init start time allows over a minute
@@ -308,23 +299,23 @@ bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) {
watchdog_reset();
#endif
- // initialize card and send host supports SDHC if SD2
+ // Initialize card and send host supports SDHC if SD2
arg = type() == SD_CARD_TYPE_SD2 ? 0x40000000 : 0;
while ((status_ = cardAcmd(ACMD41, arg)) != R1_READY_STATE) {
- // check for timeout
+ // Check for timeout
if (ELAPSED(millis(), init_timeout)) {
error(SD_CARD_ERROR_ACMD41);
goto FAIL;
}
}
- // if SD2 read OCR register to check for SDHC card
+ // If SD2 read OCR register to check for SDHC card
if (type() == SD_CARD_TYPE_SD2) {
if (cardCommand(CMD58, 0)) {
error(SD_CARD_ERROR_CMD58);
goto FAIL;
}
if ((spiRec() & 0xC0) == 0xC0) type(SD_CARD_TYPE_SDHC);
- // discard rest of ocr - contains allowed voltage range
+ // Discard rest of ocr - contains allowed voltage range
for (uint8_t i = 0; i < 3; i++) spiRec();
}
chipDeselect();
@@ -344,8 +335,7 @@ bool Sd2Card::init(uint8_t sckRateID, pin_t chipSelectPin) {
* \return true for success, false for failure.
*/
bool Sd2Card::readBlock(uint32_t blockNumber, uint8_t* dst) {
- // use address if not SDHC card
- if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
+ if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card
#if ENABLED(SD_CHECK_AND_RETRY)
uint8_t retryCnt = 3;
@@ -447,44 +437,39 @@ bool Sd2Card::readData(uint8_t* dst) {
#endif
#endif // SD_CHECK_AND_RETRY
-bool Sd2Card::readData(uint8_t* dst, uint16_t count) {
- // wait for start block token
+bool Sd2Card::readData(uint8_t* dst, const uint16_t count) {
+ bool success = false;
+
const millis_t read_timeout = millis() + SD_READ_TIMEOUT;
- while ((status_ = spiRec()) == 0xFF) {
+ while ((status_ = spiRec()) == 0xFF) { // Wait for start block token
if (ELAPSED(millis(), read_timeout)) {
error(SD_CARD_ERROR_READ_TIMEOUT);
goto FAIL;
}
}
- if (status_ != DATA_START_BLOCK) {
- error(SD_CARD_ERROR_READ);
- goto FAIL;
- }
- // transfer data
- spiRead(dst, count);
-#if ENABLED(SD_CHECK_AND_RETRY)
- {
- uint16_t recvCrc = (spiRec() << 8) | spiRec();
- if (crcSupported && recvCrc != CRC_CCITT(dst, count)) {
- error(SD_CARD_ERROR_READ_CRC);
- goto FAIL;
- }
+ if (status_ == DATA_START_BLOCK) {
+ spiRead(dst, count); // Transfer data
+
+ const uint16_t recvCrc = (spiRec() << 8) | spiRec();
+ #if ENABLED(SD_CHECK_AND_RETRY)
+ success = !crcSupported || recvCrc == CRC_CCITT(dst, count);
+ if (!success) error(SD_CARD_ERROR_READ_CRC);
+ #else
+ success = true;
+ UNUSED(recvCrc);
+ #endif
}
-#else
- // discard CRC
- spiRec();
- spiRec();
-#endif
- chipDeselect();
- return true;
+ else
+ error(SD_CARD_ERROR_READ);
+
FAIL:
chipDeselect();
- return false;
+ return success;
}
/** read CID or CSR register */
-bool Sd2Card::readRegister(uint8_t cmd, void* buf) {
+bool Sd2Card::readRegister(const uint8_t cmd, void* buf) {
uint8_t* dst = reinterpret_cast(buf);
if (cardCommand(cmd, 0)) {
error(SD_CARD_ERROR_READ_REG);
@@ -506,13 +491,11 @@ bool Sd2Card::readRegister(uint8_t cmd, void* buf) {
*/
bool Sd2Card::readStart(uint32_t blockNumber) {
if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
- if (cardCommand(CMD18, blockNumber)) {
- error(SD_CARD_ERROR_CMD18);
- chipDeselect();
- return false;
- }
+
+ const bool success = !cardCommand(CMD18, blockNumber);
+ if (!success) error(SD_CARD_ERROR_CMD18);
chipDeselect();
- return true;
+ return success;
}
/**
@@ -522,13 +505,10 @@ bool Sd2Card::readStart(uint32_t blockNumber) {
*/
bool Sd2Card::readStop() {
chipSelect();
- if (cardCommand(CMD12, 0)) {
- error(SD_CARD_ERROR_CMD12);
- chipDeselect();
- return false;
- }
+ const bool success = !cardCommand(CMD12, 0);
+ if (!success) error(SD_CARD_ERROR_CMD12);
chipDeselect();
- return true;
+ return success;
}
/**
@@ -543,16 +523,20 @@ bool Sd2Card::readStop() {
* \return The value one, true, is returned for success and the value zero,
* false, is returned for an invalid value of \a sckRateID.
*/
-bool Sd2Card::setSckRate(uint8_t sckRateID) {
- if (sckRateID > 6) {
+bool Sd2Card::setSckRate(const uint8_t sckRateID) {
+ const bool success = (sckRateID <= 6);
+ if (success)
+ spiRate_ = sckRateID;
+ else
error(SD_CARD_ERROR_SCK_RATE);
- return false;
- }
- spiRate_ = sckRateID;
- return true;
+ return success;
}
-// wait for card to go not busy
+/**
+ * Wait for card to become not-busy
+ * \param[in] timeout_ms Timeout to abort.
+ * \return true for success, false for timeout.
+ */
bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
const millis_t wait_timeout = millis() + timeout_ms;
while (spiRec() != 0xFF)
@@ -562,36 +546,31 @@ bool Sd2Card::waitNotBusy(const millis_t timeout_ms) {
}
/**
- * Writes a 512 byte block to an SD card.
+ * Write a 512 byte block to an SD card.
*
* \param[in] blockNumber Logical block to be written.
* \param[in] src Pointer to the location of the data to be written.
* \return true for success, false for failure.
*/
bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
- // use address if not SDHC card
- if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
- if (cardCommand(CMD24, blockNumber)) {
- error(SD_CARD_ERROR_CMD24);
- goto FAIL;
- }
- if (!writeData(DATA_START_BLOCK, src)) goto FAIL;
+ if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card
- // wait for flash programming to complete
- if (!waitNotBusy(SD_WRITE_TIMEOUT)) {
- error(SD_CARD_ERROR_WRITE_TIMEOUT);
- goto FAIL;
- }
- // response is r2 so get and check two bytes for nonzero
- if (cardCommand(CMD13, 0) || spiRec()) {
- error(SD_CARD_ERROR_WRITE_PROGRAMMING);
- goto FAIL;
+ bool success = false;
+ if (!cardCommand(CMD24, blockNumber)) {
+ if (writeData(DATA_START_BLOCK, src)) {
+ if (waitNotBusy(SD_WRITE_TIMEOUT)) { // Wait for flashing to complete
+ success = !(cardCommand(CMD13, 0) || spiRec()); // Response is r2 so get and check two bytes for nonzero
+ if (!success) error(SD_CARD_ERROR_WRITE_PROGRAMMING);
+ }
+ else
+ error(SD_CARD_ERROR_WRITE_TIMEOUT);
+ }
}
+ else
+ error(SD_CARD_ERROR_CMD24);
+
chipDeselect();
- return true;
- FAIL:
- chipDeselect();
- return false;
+ return success;
}
/**
@@ -600,28 +579,30 @@ bool Sd2Card::writeBlock(uint32_t blockNumber, const uint8_t* src) {
* \return true for success, false for failure.
*/
bool Sd2Card::writeData(const uint8_t* src) {
+ bool success = true;
chipSelect();
- // wait for previous write to finish
+ // Wait for previous write to finish
if (!waitNotBusy(SD_WRITE_TIMEOUT) || !writeData(WRITE_MULTIPLE_TOKEN, src)) {
error(SD_CARD_ERROR_WRITE_MULTIPLE);
- chipDeselect();
- return false;
+ success = false;
}
chipDeselect();
- return true;
+ return success;
}
-// send one block of data for write block or write multiple blocks
-bool Sd2Card::writeData(uint8_t token, const uint8_t* src) {
+// Send one block of data for write block or write multiple blocks
+bool Sd2Card::writeData(const uint8_t token, const uint8_t* src) {
-#if ENABLED(SD_CHECK_AND_RETRY)
- uint16_t crc = CRC_CCITT( src, 512 );
-#else // ENABLED(SD_CHECK_AND_RETRY)
- uint16_t crc = 0xFFFF;
-#endif // ENABLED(SD_CHECK_AND_RETRY)
- spiSendBlock( token, src );
- spiSend( crc >> 8 );
- spiSend( crc & 0XFF );
+ uint16_t crc =
+ #if ENABLED(SD_CHECK_AND_RETRY)
+ CRC_CCITT(src, 512)
+ #else
+ 0xFFFF
+ #endif
+ ;
+ spiSendBlock(token, src);
+ spiSend(crc >> 8);
+ spiSend(crc & 0xFF);
status_ = spiRec();
if ((status_ & DATA_RES_MASK) != DATA_RES_ACCEPTED) {
@@ -643,23 +624,18 @@ bool Sd2Card::writeData(uint8_t token, const uint8_t* src) {
*
* \return true for success, false for failure.
*/
-bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {
- // send pre-erase count
- if (cardAcmd(ACMD23, eraseCount)) {
+bool Sd2Card::writeStart(uint32_t blockNumber, const uint32_t eraseCount) {
+ bool success = false;
+ if (!cardAcmd(ACMD23, eraseCount)) { // Send pre-erase count
+ if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9; // Use address if not SDHC card
+ success = !cardCommand(CMD25, blockNumber);
+ if (!success) error(SD_CARD_ERROR_CMD25);
+ }
+ else
error(SD_CARD_ERROR_ACMD23);
- goto FAIL;
- }
- // use address if not SDHC card
- if (type() != SD_CARD_TYPE_SDHC) blockNumber <<= 9;
- if (cardCommand(CMD25, blockNumber)) {
- error(SD_CARD_ERROR_CMD25);
- goto FAIL;
- }
+
chipDeselect();
- return true;
- FAIL:
- chipDeselect();
- return false;
+ return success;
}
/**
@@ -668,16 +644,17 @@ bool Sd2Card::writeStart(uint32_t blockNumber, uint32_t eraseCount) {
* \return true for success, false for failure.
*/
bool Sd2Card::writeStop() {
+ bool success = false;
chipSelect();
- if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
- spiSend(STOP_TRAN_TOKEN);
- if (!waitNotBusy(SD_WRITE_TIMEOUT)) goto FAIL;
+ if (waitNotBusy(SD_WRITE_TIMEOUT)) {
+ spiSend(STOP_TRAN_TOKEN);
+ success = waitNotBusy(SD_WRITE_TIMEOUT);
+ }
+ else
+ error(SD_CARD_ERROR_STOP_TRAN);
+
chipDeselect();
- return true;
- FAIL:
- error(SD_CARD_ERROR_STOP_TRAN);
- chipDeselect();
- return false;
+ return success;
}
#endif // SDSUPPORT
diff --git a/Marlin/src/sd/Sd2Card.h b/Marlin/src/sd/Sd2Card.h
index 8f14073df8..2701f65a47 100644
--- a/Marlin/src/sd/Sd2Card.h
+++ b/Marlin/src/sd/Sd2Card.h
@@ -112,7 +112,7 @@ uint8_t const SD_CARD_TYPE_SD1 = 1, // Standard capacity V1
* \brief Raw access to SD and SDHC flash memory cards.
*/
class Sd2Card {
- public:
+public:
Sd2Card() : errorCode_(SD_CARD_ERROR_INIT_NOT_CALLED), type_(0) {}
@@ -124,15 +124,15 @@ class Sd2Card {
* Set SD error code.
* \param[in] code value for error code.
*/
- void error(uint8_t code) {errorCode_ = code;}
+ inline void error(const uint8_t code) { errorCode_ = code; }
/**
* \return error code for last error. See Sd2Card.h for a list of error codes.
*/
- int errorCode() const {return errorCode_;}
+ inline int errorCode() const { return errorCode_; }
/** \return error data for last error. */
- int errorData() const {return status_;}
+ inline int errorData() const { return status_; }
/**
* Initialize an SD flash memory card with default clock rate and chip
@@ -140,8 +140,8 @@ class Sd2Card {
*
* \return true for success or false for failure.
*/
- bool init(uint8_t sckRateID = SPI_FULL_SPEED,
- pin_t chipSelectPin = SD_CHIP_SELECT_PIN);
+ bool init(const uint8_t sckRateID=SPI_FULL_SPEED, const pin_t chipSelectPin=SD_CHIP_SELECT_PIN);
+
bool readBlock(uint32_t block, uint8_t* dst);
/**
@@ -163,12 +163,13 @@ class Sd2Card {
*
* \return true for success or false for failure.
*/
- bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); }
+ inline bool readCSD(csd_t* csd) { return readRegister(CMD9, csd); }
bool readData(uint8_t* dst);
bool readStart(uint32_t blockNumber);
bool readStop();
- bool setSckRate(uint8_t sckRateID);
+ bool setSckRate(const uint8_t sckRateID);
+
/**
* Return the card type: SD V1, SD V2 or SDHC
* \return 0 - SD V1, 1 - SD V2, or 3 - SDHC.
@@ -176,10 +177,10 @@ class Sd2Card {
int type() const {return type_;}
bool writeBlock(uint32_t blockNumber, const uint8_t* src);
bool writeData(const uint8_t* src);
- bool writeStart(uint32_t blockNumber, uint32_t eraseCount);
+ bool writeStart(uint32_t blockNumber, const uint32_t eraseCount);
bool writeStop();
- private:
+private:
uint8_t chipSelectPin_,
errorCode_,
spiRate_,
@@ -187,17 +188,17 @@ class Sd2Card {
type_;
// private functions
- uint8_t cardAcmd(uint8_t cmd, uint32_t arg) {
+ inline uint8_t cardAcmd(const uint8_t cmd, const uint32_t arg) {
cardCommand(CMD55, 0);
return cardCommand(cmd, arg);
}
- uint8_t cardCommand(uint8_t cmd, uint32_t arg);
+ uint8_t cardCommand(const uint8_t cmd, const uint32_t arg);
- bool readData(uint8_t* dst, uint16_t count);
- bool readRegister(uint8_t cmd, void* buf);
+ bool readData(uint8_t* dst, const uint16_t count);
+ bool readRegister(const uint8_t cmd, void* buf);
void chipDeselect();
void chipSelect();
- void type(uint8_t value) { type_ = value; }
+ inline void type(const uint8_t value) { type_ = value; }
bool waitNotBusy(const millis_t timeout_ms);
- bool writeData(uint8_t token, const uint8_t* src);
+ bool writeData(const uint8_t token, const uint8_t* src);
};
diff --git a/Marlin/src/sd/Sd2Card_sdio.h b/Marlin/src/sd/Sd2Card_sdio.h
new file mode 100644
index 0000000000..23c6796c19
--- /dev/null
+++ b/Marlin/src/sd/Sd2Card_sdio.h
@@ -0,0 +1,39 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see .
+ *
+ */
+#pragma once
+
+#include "../inc/MarlinConfig.h"
+
+#if ENABLED(SDIO_SUPPORT)
+
+bool SDIO_Init(void);
+bool SDIO_ReadBlock(uint32_t block, uint8_t *dst);
+bool SDIO_WriteBlock(uint32_t block, const uint8_t *src);
+
+class Sd2Card {
+ public:
+ bool init(uint8_t sckRateID = 0, uint8_t chipSelectPin = 0) { return SDIO_Init(); }
+ bool readBlock(uint32_t block, uint8_t *dst) { return SDIO_ReadBlock(block, dst); }
+ bool writeBlock(uint32_t block, const uint8_t *src) { return SDIO_WriteBlock(block, src); }
+};
+
+#endif // SDIO_SUPPORT
diff --git a/Marlin/src/sd/SdVolume.h b/Marlin/src/sd/SdVolume.h
index 0f3839362f..5a7cb31f14 100644
--- a/Marlin/src/sd/SdVolume.h
+++ b/Marlin/src/sd/SdVolume.h
@@ -35,6 +35,8 @@
#if ENABLED(USB_FLASH_DRIVE_SUPPORT)
#include "usb_flashdrive/Sd2Card_FlashDrive.h"
+#elif ENABLED(SDIO_SUPPORT)
+ #include "Sd2Card_sdio.h"
#else
#include "Sd2Card.h"
#endif
diff --git a/Marlin/src/sd/cardreader.cpp b/Marlin/src/sd/cardreader.cpp
index fb21aab814..c47bc03dbb 100644
--- a/Marlin/src/sd/cardreader.cpp
+++ b/Marlin/src/sd/cardreader.cpp
@@ -1022,7 +1022,7 @@ void CardReader::printingHasFinished() {
presort();
#endif
- #if ENABLED(ULTRA_LCD) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
+ #if (ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)) && ENABLED(LCD_SET_PROGRESS_MANUALLY)
ui.progress_bar_percent = 0;
#endif
diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
index f4fda4b3c9..6cf6dd8c3b 100644
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.cpp
@@ -31,6 +31,10 @@
#include "Sd2Card_FlashDrive.h"
+#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+ #include "../../lcd/ultralcd.h"
+#endif
+
USB usb;
BulkOnly bulk(&usb);
@@ -46,25 +50,27 @@ void Sd2Card::idle() {
switch (state) {
case USB_HOST_DELAY_INIT:
- next_retry = millis() + 10000;
+ next_retry = millis() + 2000;
state = USB_HOST_WAITING;
break;
case USB_HOST_WAITING:
if (ELAPSED(millis(), next_retry)) {
- next_retry = millis() + 10000;
+ next_retry = millis() + 2000;
state = USB_HOST_UNINITIALIZED;
}
break;
case USB_HOST_UNINITIALIZED:
- SERIAL_ECHOLNPGM("Starting USB host");
+ SERIAL_ECHOPGM("Starting USB host...");
if (!usb.start()) {
- SERIAL_ECHOLNPGM("USB host failed to start. Will retry in 10 seconds.");
+ SERIAL_ECHOPGM(" Failed. Retrying in 2s.");
+ #if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
+ LCD_MESSAGEPGM("USB start failed");
+ #endif
state = USB_HOST_DELAY_INIT;
}
- else {
- SERIAL_ECHOLNPGM("USB host initialized");
+ else
state = USB_HOST_INITIALIZED;
- }
+ SERIAL_EOL();
break;
case USB_HOST_INITIALIZED:
const uint8_t lastUsbTaskState = usb.getUsbTaskState();
@@ -91,10 +97,10 @@ void Sd2Card::idle() {
// This is equivalent to polling the SD_DETECT when using SD cards.
bool Sd2Card::isInserted() {
return usb.getUsbTaskState() == USB_STATE_RUNNING;
-};
+}
// Marlin calls this to initialize an SD card once it is inserted.
-bool Sd2Card::init(uint8_t sckRateID, uint8_t chipSelectPin) {
+bool Sd2Card::init(const uint8_t sckRateID/*=0*/, const pin_t chipSelectPin/*=SD_CHIP_SELECT_PIN*/) {
if (!ready()) return false;
if (!bulk.LUNIsGood(0)) {
@@ -121,7 +127,7 @@ uint32_t Sd2Card::cardSize() {
#ifndef USB_DEBUG
const uint32_t
#endif
- lun0_capacity = bulk.GetCapacity(0);
+ lun0_capacity = bulk.GetCapacity(0);
return lun0_capacity;
}
diff --git a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
index ee044a19b6..b27715ee03 100644
--- a/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
+++ b/Marlin/src/sd/usb_flashdrive/Sd2Card_FlashDrive.h
@@ -32,7 +32,6 @@
*/
//#define USB_DEBUG 1
-
#include "../SdFatConfig.h"
#include "../SdInfo.h"
@@ -61,11 +60,11 @@
class Sd2Card {
private:
- typedef enum {
- USB_HOST_DELAY_INIT,
- USB_HOST_WAITING,
+ typedef enum : uint8_t {
USB_HOST_UNINITIALIZED,
- USB_HOST_INITIALIZED
+ USB_HOST_INITIALIZED,
+ USB_HOST_DELAY_INIT,
+ USB_HOST_WAITING
} state_t;
static state_t state;
@@ -75,21 +74,20 @@ class Sd2Card {
uint32_t lun0_capacity;
#endif
- static inline bool ready() {return state == USB_HOST_INITIALIZED;}
+ static inline bool ready() { return state == USB_HOST_INITIALIZED; }
public:
- bool init(uint8_t sckRateID = 0, uint8_t chipSelectPin = SD_CHIP_SELECT_PIN);
+ bool init(const uint8_t sckRateID=0, const pin_t chipSelectPin=SD_CHIP_SELECT_PIN);
static void idle();
- bool readStart(uint32_t block) { pos = block; return ready(); }
- bool readData(uint8_t* dst) { return readBlock(pos++, dst); }
- bool readStop() { return true; }
-
- bool writeStart(uint32_t block, uint32_t eraseCount) { pos = block; return ready(); }
- bool writeData(uint8_t* src) { return writeBlock(pos++, src); }
- bool writeStop() { return true; }
+ inline bool readStart(const uint32_t block) { pos = block; return ready(); }
+ inline bool readData(uint8_t* dst) { return readBlock(pos++, dst); }
+ inline bool readStop() const { return true; }
+ inline bool writeStart(const uint32_t block, const uint32_t eraseCount) { UNUSED(eraseCount); pos = block; return ready(); }
+ inline bool writeData(uint8_t* src) { return writeBlock(pos++, src); }
+ inline bool writeStop() const { return true; }
bool readBlock(uint32_t block, uint8_t* dst);
bool writeBlock(uint32_t blockNumber, const uint8_t* src);