From e4cad11951493dddcbc5155b5578b266cdf8733d Mon Sep 17 00:00:00 2001
From: InsanityAutomation <d.menzel@insanityautomation.com>
Date: Sun, 31 Mar 2019 10:42:02 -0400
Subject: [PATCH] Add commission menu

---
 Marlin/Configuration.h     | 11 ++++++++---
 Marlin/Configuration_adv.h | 34 +++++++++++++++++-----------------
 2 files changed, 25 insertions(+), 20 deletions(-)

diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index beac61c561..f0c12ea073 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -995,8 +995,13 @@
 // @section machine
 
 // The size of the print bed
-#define X_BED_SIZE 398
-#define Y_BED_SIZE 398
+#if ENABLED(PetsfangMicroswiss)
+  #define X_BED_SIZE 398
+  #define Y_BED_SIZE 390
+#else
+  #define X_BED_SIZE 398
+  #define Y_BED_SIZE 398
+#endif
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1425,7 +1430,7 @@
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
   // Specify a park position as { X, Y, Z }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 10 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 30), 10 }
   #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
   #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 80b812c4de..c6b6bed028 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -1999,30 +1999,30 @@
   #define GCODE_MACROS_SLOT_SIZE  50  // Maximum length of a single macro
 #endif
 
-/**
- * User-defined menu items that execute custom GCode
- */
-//#define CUSTOM_USER_MENUS
+
+#define CUSTOM_USER_MENUS
+
 #if ENABLED(CUSTOM_USER_MENUS)
-  //#define CUSTOM_USER_MENU_TITLE "Custom Commands"
-  #define USER_SCRIPT_DONE "M117 User Script Done"
+  //#define USER_SCRIPT_DONE "M117 User Script Done"
   #define USER_SCRIPT_AUDIBLE_FEEDBACK
-  //#define USER_SCRIPT_RETURN  // Return to status screen after a script
+  #define USER_SCRIPT_RETURN  // Return to status screen after a script
+  #define CUSTOM_USER_MENU_TITLE "Commissioning"
 
-  #define USER_DESC_1 "Home & UBL Info"
-  #define USER_GCODE_1 "G28\nG29 W"
+  #define USER_DESC_1 "Mesh Commission"
 
-  #define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
-  #define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
+  #define USER_GCODE_1 "M117 \n M502 \n M500 \n M501 \n M190 S65 \n M117 Probing.... \n M104 S225 \n G28 \n G29 \n M500 \n G28 \n M420 S \n M109 S225 \n G1 X100 Y 100 \n G1 Z0 \n M77 \n M117 Set Z Offset"
+  
+  #define USER_DESC_2 "PID Tune"
+  #define USER_GCODE_2 "M106 S128 \n M303 C8 S225 E1 U \n M500 \n M117 PID Tune Done"
 
-  #define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
-  #define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
+  #define USER_DESC_3 "Prep for Z Adjust"
+  #define USER_GCODE_3 "M190 S65\n M104 235 \n G28 \n G29 L1 \n G1 X100 Y 100 \n G1 Z0"
 
-  #define USER_DESC_4 "Heat Bed/Home/Level"
-  #define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
+  #define USER_DESC_4 "Store Settings"
+  #define USER_GCODE_4 "M500"
 
-  #define USER_DESC_5 "Home & Info"
-  #define USER_GCODE_5 "G28\nM503"
+  //#define USER_DESC_5 "Run Mesh Validation"
+  //#define USER_GCODE_5 "G26"
 #endif
 
 /**