diff --git a/Marlin/Configuration.h b/Marlin/Configuration.h
index bf69b7b61d..0a78679e05 100644
--- a/Marlin/Configuration.h
+++ b/Marlin/Configuration.h
@@ -463,7 +463,7 @@
   #endif
 #endif
 
-#if ANY(MachineEnder3V2, MachineEnder3Pro422, MachineEnder3Pro427)
+#if ANY(MachineEnder3V2, MachineEnder3Pro422, MachineEnder3Pro427, Creality422, Creality427)
   #define POWER_LOSS_RECOVERY //Screen will not compile without PLR
   #if NONE(BedAC, BedDC)
     #define BedDC
@@ -476,6 +476,12 @@
   #define RET6_12864_LCD
 #endif
 
+#if ENABLED(MachineEnder3Pro422)
+  #define Creality422
+#elif ENABLED(MachineEnder3Pro427)
+  #define Creality427
+#endif
+
 #if EITHER(Creality422, Creality427) && DISABLED(MachineEnder3V2)
   #define RET6_12864_LCD
 #endif
@@ -576,11 +582,15 @@
   #define LCD_SERIAL_PORT 0
   #define LCD_BAUDRATE 115200
   #define SERIAL_CATCHALL -1
-#elif ANY(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max) && NONE(GraphicLCD, MachineEnder3V2)
+#elif ANY(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max) && NONE(GraphicLCD, MachineEnder3V2, Creality422, Creality427)
   #define LCD_SERIAL_PORT 2
   #define LCD_BAUDRATE 115200
   #define SERIAL_CATCHALL 0
-#elif ANY(MachineEnder3Pro422, MachineEnder3Pro427) && DISABLED(MachineEnder3V2)
+#elif ANY(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max) && DISABLED(GraphicLCD)
+  #define LCD_SERIAL_PORT 3
+  #define LCD_BAUDRATE 115200
+  #define SERIAL_CATCHALL 1
+#elif ANY(Creality422, Creality427) && DISABLED(MachineEnder3V2)
   #define SERIAL_PORT_2 3
 #endif
 
@@ -1060,9 +1070,9 @@
   #else
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
     #if ANY(HotendMosquito, PID50W)
-      #define DEFAULT_Kp 25.95
-      #define DEFAULT_Ki 3.08
-      #define DEFAULT_Kd 54.74
+      #define DEFAULT_Kp 16.8
+      #define DEFAULT_Ki 1.2
+      #define DEFAULT_Kd 54.3
     #elif ENABLED(HotendStock)
       #if ANY(MachineCR10SPro, MachineCR10Max)
         #define DEFAULT_Kp 25.25
diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index 7ce9e11a52..22a5ff9c90 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -988,7 +988,7 @@
 // Increase the slowdown divisor for larger buffer sizes.
 #define SLOWDOWN
 #if ENABLED(SLOWDOWN)
-  #if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3V2)
+  #if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3V2, Creality422, Creality427)
     #define SLOWDOWN_DIVISOR 4
   #else
     #define SLOWDOWN_DIVISOR 2
@@ -1108,7 +1108,7 @@
  * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  * lowest stepping frequencies.
  */
-#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, MachineEnder3V2)
+#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, MachineEnder3V2, Creality422, Creality427)
   #define ADAPTIVE_STEP_SMOOTHING
 #endif
 
@@ -1334,7 +1334,7 @@
 
   // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
   // Enable this option and set to HIGH if your SD cards are incorrectly detected.
-  #if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder3V2, MachineEnder3Pro422, MachineEnder3Pro427, SKR14Turbo, SKR14, , Creality422, Creality427)
+  #if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder3V2, SKR14Turbo, SKR14, , Creality422, Creality427)
     #define SD_DETECT_STATE HIGH
   #endif
 
@@ -2149,7 +2149,7 @@
 
 // The number of linear moves that can be in the planner at once.
 // The value of BLOCK_BUFFER_SIZE must be a power of 2 (e.g. 8, 16, 32)
-#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3V2) || DISABLED(EXTENSIBLE_UI)
+#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, MachineEnder3V2, Creality422, Creality427) || DISABLED(EXTENSIBLE_UI)
   #define BLOCK_BUFFER_SIZE 16
 #else
   #define BLOCK_BUFFER_SIZE 8
@@ -2159,7 +2159,7 @@
 
 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 96
-#if ANY(MachineCR10Orig, SKRMiniE3V2, MachineEnder3V2) //melzi has more ram than a 2560
+#if ANY(MachineCR10Orig, SKRMiniE3V2, MachineEnder3V2, Creality422, Creality427) //melzi has more ram than a 2560
   #define BUFSIZE 16
 #elif ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11)
   #define BUFSIZE 8
@@ -2218,7 +2218,7 @@
  * Currently handles M108, M112, M410, M876
  * NOTE: Not yet implemented for all platforms.
  */
-#if NONE(SKRPRO11, SKRMiniE3V2, MachineEnder3V2, MachineEnder3V2, MachineEnder3Pro422, MachineEnder3Pro427)
+#if NONE(SKRPRO11, SKRMiniE3V2)
   #define EMERGENCY_PARSER
 #endif
 
@@ -2276,7 +2276,7 @@
  *
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  */
- #if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, MachineEnder3V2)
+ #if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, MachineEnder3V2, Creality422, Creality427)
   #define FWRETRACT
 #endif
 #if ENABLED(FWRETRACT)
@@ -4103,7 +4103,9 @@
 //
 // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
 //
-//#define PINS_DEBUGGING
+#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, MachineEnder3V2, Creality422, Creality427)
+  #define PINS_DEBUGGING
+#endif
 
 // Enable Marlin dev mode which adds some special commands
 //#define MARLIN_DEV_MODE
diff --git a/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.cpp b/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.cpp
index a9e0318e34..799345c0e3 100644
--- a/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.cpp
+++ b/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.cpp
@@ -86,7 +86,7 @@ void onStartup()
   #else
     rtscheck.RTS_SndData(MACHINE_NAME, MacVersion);
   #endif
-	rtscheck.RTS_SndData(DETAILED_BUILD_VERSION, SoftVersion);
+	rtscheck.RTS_SndData(SHORT_BUILD_VERSION, SoftVersion);
 	rtscheck.RTS_SndData(sizebuf, PrinterSize);
 	rtscheck.RTS_SndData(WEBSITE_URL, CorpWebsite);
 
@@ -262,22 +262,25 @@ void onIdle()
 				}
 				rtscheck.RTS_SndData((unsigned int)getProgress_percent(), Percentage);
 			}
-      else if(getTargetTemp_celsius(BED)==0 && getTargetTemp_celsius(H0)==0)
-      {
-        rtscheck.RTS_SndData(0 + CEIconGrap, IconPrintstatus);
-      }
-      else if (getActualTemp_celsius(BED) < (getTargetTemp_celsius(BED) - THERMAL_PROTECTION_BED_HYSTERESIS ) || (getActualTemp_celsius(H0) < (getTargetTemp_celsius(H0) - THERMAL_PROTECTION_HYSTERESIS)))
-			{
-				rtscheck.RTS_SndData(1 + CEIconGrap, IconPrintstatus); // Heating Status
-				PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 1 : PrinterStatusKey[1]);
-			}
-			else if (getActualTemp_celsius(BED) > (getTargetTemp_celsius(BED) + THERMAL_PROTECTION_BED_HYSTERESIS) || (getActualTemp_celsius(H0) > (getTargetTemp_celsius(H0) + THERMAL_PROTECTION_HYSTERESIS)))
-			{
-				rtscheck.RTS_SndData(8 + CEIconGrap, IconPrintstatus); // Cooling Status
-				PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 2 : PrinterStatusKey[1]);
-			}
       else
-        rtscheck.RTS_SndData(0 + CEIconGrap, IconPrintstatus);
+      {
+        if(getTargetTemp_celsius(BED)==0 && getTargetTemp_celsius(H0)==0)
+        {
+          rtscheck.RTS_SndData(0 + CEIconGrap, IconPrintstatus);
+        }
+        else if (getActualTemp_celsius(BED) < (getTargetTemp_celsius(BED) - THERMAL_PROTECTION_BED_HYSTERESIS ) || (getActualTemp_celsius(H0) < (getTargetTemp_celsius(H0) - THERMAL_PROTECTION_HYSTERESIS)))
+        {
+          rtscheck.RTS_SndData(1 + CEIconGrap, IconPrintstatus); // Heating Status
+          PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 1 : PrinterStatusKey[1]);
+        }
+        else if (getActualTemp_celsius(BED) > (getTargetTemp_celsius(BED) + THERMAL_PROTECTION_BED_HYSTERESIS) || (getActualTemp_celsius(H0) > (getTargetTemp_celsius(H0) + THERMAL_PROTECTION_HYSTERESIS)))
+        {
+          rtscheck.RTS_SndData(8 + CEIconGrap, IconPrintstatus); // Cooling Status
+          PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 2 : PrinterStatusKey[1]);
+        }
+        else
+          rtscheck.RTS_SndData(0 + CEIconGrap, IconPrintstatus);
+      }
 
 
 			rtscheck.RTS_SndData(getZOffset_mm() * 100, ProbeOffset_Z);
@@ -348,6 +351,20 @@ void onIdle()
 					AutoHomeIconNum = 0;
 			}
 	}
+
+  if(isMediaInserted())
+  {
+    uint16_t currPage;
+    if(fileIndex == 0)
+      currPage = 1;
+    else
+      currPage = CEIL((float)((float)fileIndex / (float)DISPLAY_FILES)) +1;
+
+    uint16_t maxPages = CEIL(((float)filenavigator.maxFiles() / (float)DISPLAY_FILES));
+    rtscheck.RTS_SndData(currPage, FilesCurentPage);
+    rtscheck.RTS_SndData(maxPages, FilesMaxPage);
+  }
+
   void yield();
 	if (rtscheck.RTS_RecData() > 0)
 		rtscheck.RTS_HandleData();
@@ -1768,7 +1785,7 @@ void onUserConfirmRequired(const char *const msg)
 }
 void onStatusChanged(const char *const statMsg)
 {
-  for (int j = 0; j < 40; j++) // Clear old message
+  for (int j = 0; j < 20; j++) // Clear old message
     rtscheck.RTS_SndData(' ', StatusMessageString+j);
   rtscheck.RTS_SndData(statMsg, StatusMessageString);
 }
diff --git a/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.h b/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.h
index 53e71d4310..048824dd10 100644
--- a/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.h
+++ b/Marlin/src/lcd/extui/lib/Creality/Creality_DWIN.h
@@ -97,6 +97,8 @@ namespace ExtUI {
 #define	FilenameIcon			0x1200
 #define	FilenameIcon1		0x1220
 #define	Printfilename			0x2000
+#define	FilesCurentPage		0x1310
+#define	FilesMaxPage		0x1312
 #define	SDFILE_ADDR		0x200A
 #define	FilenamePlay			0x20D2
 #define	FilenameChs			0x20D3
@@ -104,11 +106,12 @@ namespace ExtUI {
 #define	FilenameCount		0x20DE
 #define	FilenameNature		0x6003
 
-#if ANY(MachineCR10SPro, MachineEnder5Plus, MachineCR10Max) || ENABLED(Force10SProDisplay)
-  #define StatusMessageString 0x3000
-#else
-  #define StatusMessageString 0x20E8
-#endif
+//#if ANY(MachineCR10SPro, MachineEnder5Plus, MachineCR10Max) || ENABLED(Force10SProDisplay)
+//  #define StatusMessageString 0x3000
+//#else
+//  #define StatusMessageString 0x20E8
+//#endif
+#define StatusMessageString 0x2064
 
 #if defined(TARGET_STM32F4)
   #define DWIN_SERIAL Serial1
diff --git a/Marlin/src/lcd/extui/lib/Creality/FileNavigator.cpp b/Marlin/src/lcd/extui/lib/Creality/FileNavigator.cpp
index 151e40fd7b..0fd42b4b1e 100644
--- a/Marlin/src/lcd/extui/lib/Creality/FileNavigator.cpp
+++ b/Marlin/src/lcd/extui/lib/Creality/FileNavigator.cpp
@@ -21,14 +21,16 @@
  */
 
 /* ****************************************
- * lcd/extui/lib/nextion/FileNavigator.cpp
+ * lcd/extui/lib/Creality/FileNavigator.cpp
  * ****************************************
- * Extensible_UI implementation for Nextion
- * https://github.com/Skorpi08
+ * Extensible_UI implementation for Creality DWIN
+ * 10SPro, Max, CR10V2
+ * Based on implementations for Anycubic Chiron and Nextion by Nick Wells and Skorpi08
+ * Written by Insanity Automation
  * ***************************************/
 
 #include "../../../../inc/MarlinConfigPre.h"
-
+#if ENABLED(EXTENSIBLE_UI)
 
 
 #include "FileNavigator.h"
@@ -112,7 +114,7 @@ void FileNavigator::getFiles(uint16_t index) {
     rtscheck.RTS_SndData(10, FilenameIcon1 + j);
   }
 
-  SERIAL_ECHOLNPAIR("index=", index, " currentindex=", currentindex, "folderdepth=", folderdepth);
+  DEBUG_ECHOLNPAIR("index=", index, " currentindex=", currentindex, "folderdepth=", folderdepth);
 
   if (currentindex == 0 && folderdepth > 0) { // Add a link to go up a folder
     files--;
@@ -121,13 +123,10 @@ void FileNavigator::getFiles(uint16_t index) {
   }
 
   for (uint16_t seek = currentindex; seek < currentindex + files; seek++) {
-    SERIAL_ECHOLNPAIR("Seek", seek);
     if (filelist.seek(seek)) {
-      SERIAL_ECHOLN("seek done");
       const int filelen = strlen(filelist.filename());
       if(filelen > 20)
       {
-        SERIAL_ECHOLN("trunc");
         char *buf = (char *)filelist.filename();
         //char buf[filelen];
         //strcpy(&buf[filelen], filelist.filename());
@@ -137,11 +136,16 @@ void FileNavigator::getFiles(uint16_t index) {
       else
         rtscheck.RTS_SndData(filelist.filename(), (SDFILE_ADDR + (fcnt * 20)));
       if (filelist.isDir())
+      {
+        rtscheck.RTS_SndData((uint8_t)4, FilenameIcon + (fcnt+1));
         rtscheck.RTS_SndData((unsigned long)0x041F, (FilenameNature + ((1+fcnt) * 16))); // Change BG of selected line to Blue
+      }
       else
+      {
+        rtscheck.RTS_SndData((uint8_t)0, FilenameIcon + (fcnt+1));
         rtscheck.RTS_SndData((unsigned long)0xFFFF, (FilenameNature + ((1+fcnt) * 16))); // white
-      rtscheck.RTS_SndData(1, FilenameIcon + (fcnt+1));
-      SERIAL_ECHOLNPAIR("-", seek, " '", filelist.filename(), "' '", currentfoldername, "", filelist.shortFilename(), "'\n");
+      }
+      DEBUG_ECHOLNPAIR("-", seek, " '", filelist.filename(), "' '", currentfoldername, "", filelist.shortFilename(), "'\n");
       fcnt++;
     }
   }
@@ -178,3 +182,4 @@ void FileNavigator::upDIR() {
 }
 
 char* FileNavigator::getCurrentFolderName() { return currentfoldername; }
+#endif
diff --git a/Marlin/src/lcd/extui/lib/Creality/FileNavigator.h b/Marlin/src/lcd/extui/lib/Creality/FileNavigator.h
index 0871eee081..a205bb2820 100644
--- a/Marlin/src/lcd/extui/lib/Creality/FileNavigator.h
+++ b/Marlin/src/lcd/extui/lib/Creality/FileNavigator.h
@@ -22,10 +22,12 @@
 #pragma once
 
 /* ****************************************
- * lcd/extui/lib/nextion/FileNavigator.cpp
+ * lcd/extui/lib/Creality/FileNavigator.cpp
  * ****************************************
- * Extensible_UI implementation for Nextion
- * https://github.com/Skorpi08
+ * Extensible_UI implementation for Creality DWIN
+ * 10SPro, Max, CR10V2
+ * Based on implementations for Anycubic Chiron and Nextion by Nick Wells and Skorpi08
+ * Written by Insanity Automation
  * ***************************************/
 
 #include "../../ui_api.h"
diff --git a/Marlin/src/lcd/extui/ui_api.cpp b/Marlin/src/lcd/extui/ui_api.cpp
index 66bc10c411..187d6b37e3 100644
--- a/Marlin/src/lcd/extui/ui_api.cpp
+++ b/Marlin/src/lcd/extui/ui_api.cpp
@@ -1067,6 +1067,8 @@ namespace ExtUI {
   void onStatusChanged_P(PGM_P const pstr) {
     char msg[strlen_P(pstr) + 1];
     strcpy_P(msg, pstr);
+    if(strlen(msg) > 20)
+      msg[20]="\0";
     onStatusChanged(msg);
   }