diff --git a/Marlin/Configuration_adv.h b/Marlin/Configuration_adv.h
index c67b344258..d753246dea 100644
--- a/Marlin/Configuration_adv.h
+++ b/Marlin/Configuration_adv.h
@@ -395,7 +395,7 @@
 // When first starting the main fan, run it at full speed for the
 // given number of milliseconds.  This gets the fan spinning reliably
 // before setting a PWM value. (Does not work with software PWM for fan on Sanguinololu)
-//#define FAN_KICKSTART_TIME 100
+#define FAN_KICKSTART_TIME 100
 
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1
@@ -438,7 +438,7 @@
  *   USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
  */
 #if ENABLED(FAST_PWM_FAN)
-  //#define FAST_PWM_FAN_FREQUENCY 31400
+  #define FAST_PWM_FAN_FREQUENCY 122
   //#define USE_OCR2A_AS_TOP
 #endif
 
@@ -822,7 +822,9 @@
 #define DEFAULT_STEPPER_DEACTIVE_TIME 240
 #define DISABLE_INACTIVE_X true
 #define DISABLE_INACTIVE_Y true
-#define DISABLE_INACTIVE_Z true  // Set to false if the nozzle will fall down on your printed part when print has finished.
+#if ANY(TazPro, MiniV2)
+  #define DISABLE_INACTIVE_Z true  // Set to false if the nozzle will fall down on your printed part when print has finished.
+#endif
 #define DISABLE_INACTIVE_E true
 
 #define DEFAULT_MINIMUMFEEDRATE       0.0     // minimum feedrate
@@ -875,7 +877,7 @@
   #endif
   // Set BACKLASH_SMOOTHING_MM to spread backlash correction over multiple segments
   // to reduce print artifacts. (Enabling this is costly in memory and computation!)
-  //#define BACKLASH_SMOOTHING_MM 3 // (mm)
+  #define BACKLASH_SMOOTHING_MM 3 // (mm)
 
   // Add runtime configuration and tuning of backlash values (M425)
   #define BACKLASH_GCODE
@@ -2639,7 +2641,7 @@
    *   stepperY.intpol(0); \
    * }
    */
-  #if ENABLED(Mini)
+  #if ENABLED(MiniV2)
     #define TMC_ADV() {stepperX.toff(1);stepperX.hstrt(4);stepperX.hend(0);stepperX.tbl(1);stepperY.toff(1);stepperY.hstrt(4);stepperY.hend(0);stepperY.tbl(1);stepperZ.toff(1);stepperZ.hstrt(0);stepperZ.hend(0);stepperZ.tbl(1);stepperE0.toff(1);stepperE0.hstrt(0);stepperE0.hend(0);stepperE0.tbl(1);stepperX.shaft(1);stepperX.semin(1);stepperX.semax(3);stepperY.shaft(1);stepperY.semin(1);stepperY.semax(3);stepperZ.shaft(1);stepperZ.semin(1);stepperZ.semax(3);stepperE0.shaft(1);stepperE0.semin(1);stepperE0.semax(3);} // <-- changed
   #elif ENABLED(TazPro)
     #define TMC_ADV() {stepperX.shaft(0);stepperX.semin(1);stepperX.semax(3);stepperY.shaft(0);stepperY.semin(1);stepperY.semax(3);stepperZ.shaft(0);stepperZ.semin(1);stepperZ.semax(3);stepperE0.shaft(0);stepperE0.semin(1);stepperE0.semax(3);stepperE1.shaft(0);stepperE1.semin(1);stepperE1.semax(3);} // <-- changed