Bump to head plus G34 auto assignment
This commit is contained in:
InsanityAutomation
@@ -1,11 +1,13 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration.h"
|
||||
done
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\([[:blank:]]*\)\(#define \b${opt}\b\)/\1\/\/\2/g' Marlin/Configuration_adv.h"
|
||||
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
|
||||
eval "${SED} -i '/\([[:blank:]]*\)\(\/\/\)*\([[:blank:]]*\)\(#define \b${opt}\b\)/{s//\1\3\/\/\4/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
|
||||
eval "${SED} -i '/\([[:blank:]]*\)\(\/\/\)*\([[:blank:]]*\)\(#define \b${opt}\b\)/{s//\1\3\/\/\4/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
|
||||
(echo "ERROR: opt_disable Can't find ${opt}" >&2 && exit 9)
|
||||
done
|
||||
|
||||
@@ -1,11 +1,13 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration.h"
|
||||
done
|
||||
|
||||
for opt in "$@" ; do
|
||||
eval "${SED} -i 's/\/\/[[:blank:]]*\(#define \b${opt}\b\)/\1/g' Marlin/Configuration_adv.h"
|
||||
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
|
||||
eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
|
||||
eval "${SED} -i '/\(\/\/\)*[[:blank:]]*\(#define \b${opt}\b\)/{s//\2/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
|
||||
(echo "ERROR: opt_enable Can't find ${opt}" >&2 && exit 9)
|
||||
done
|
||||
|
||||
@@ -1,6 +1,11 @@
|
||||
#!/usr/bin/env bash
|
||||
|
||||
# exit on first failure
|
||||
set -e
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration.h"
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define \b${1}\b).*$/\2 ${2}/g' Marlin/Configuration_adv.h"
|
||||
# Logic for returning nonzero based on answer here: https://stackoverflow.com/a/15966279/104648
|
||||
eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define \b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration.h" ||
|
||||
eval "${SED} -i '/\(\/\/\)*\([[:blank:]]*\)\(#define \b${1}\b\).*$/{s//\2\3 ${2}/;h};\${x;/./{x;q0};x;q9}' Marlin/Configuration_adv.h" ||
|
||||
(echo "ERROR: opt_set Can't find ${1}" >&2 && exit 9)
|
||||
|
||||
@@ -7,4 +7,5 @@ PIN=$2
|
||||
VAL=$3
|
||||
|
||||
SED=$(which gsed || which sed)
|
||||
eval "${SED} -E -i 's/(\/\/)?(#define +${PIN}\b).*$/\2 ${VAL}/g' Marlin/src/pins/$DIR/pins_${NAM}.h"
|
||||
eval "${SED} -i '/\(\/\/\)*\(#define \+${PIN}\b\).*$/{s//\2 ${VAL}/;h};\${x;/./{x;q0};x;q9}' Marlin/src/pins/$DIR/pins_${NAM}.h" ||
|
||||
(echo "ERROR: pins_set Can't find ${PIN}" >&2 && exit 9)
|
||||
|
||||
@@ -16,7 +16,7 @@
|
||||
],
|
||||
"ldscript": "stm32f407xg.ld",
|
||||
"mcu": "stm32f407vet6",
|
||||
"variant": "BIGTREE_TBD"
|
||||
"variant": "BIGTREE_BTT002"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407VE",
|
||||
|
||||
@@ -0,0 +1,65 @@
|
||||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F407xx",
|
||||
"f_cpu": "168000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"ldscript": "stm32f407xg.ld",
|
||||
"mcu": "stm32f407zgt6",
|
||||
"variant": "FLY_F407ZG"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F407ZG",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32f4x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F407ZGT6(192k RAM. 1024k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 196608,
|
||||
"maximum_size": 1048576,
|
||||
"protocol": "dfu",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "http://www.st.com/en/microcontrollers/stm32f407ZG.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
@@ -0,0 +1,65 @@
|
||||
{
|
||||
"build": {
|
||||
"core": "stm32",
|
||||
"cpu": "cortex-m4",
|
||||
"extra_flags": "-DSTM32F401xx",
|
||||
"f_cpu": "84000000L",
|
||||
"hwids": [
|
||||
[
|
||||
"0x1EAF",
|
||||
"0x0003"
|
||||
],
|
||||
[
|
||||
"0x0483",
|
||||
"0x3748"
|
||||
]
|
||||
],
|
||||
"ldscript": "stm32f401xe.ld",
|
||||
"mcu": "stm32f401vet6",
|
||||
"variant": "STEVAL_F401VE"
|
||||
},
|
||||
"debug": {
|
||||
"jlink_device": "STM32F401VE",
|
||||
"openocd_target": "stm32f4x",
|
||||
"svd_path": "STM32F40x.svd",
|
||||
"tools": {
|
||||
"stlink": {
|
||||
"server": {
|
||||
"arguments": [
|
||||
"-f",
|
||||
"scripts/interface/stlink.cfg",
|
||||
"-c",
|
||||
"transport select hla_swd",
|
||||
"-f",
|
||||
"scripts/target/stm32f4x.cfg",
|
||||
"-c",
|
||||
"reset_config none"
|
||||
],
|
||||
"executable": "bin/openocd",
|
||||
"package": "tool-openocd"
|
||||
}
|
||||
}
|
||||
}
|
||||
},
|
||||
"frameworks": [
|
||||
"arduino",
|
||||
"stm32cube"
|
||||
],
|
||||
"name": "STM32F401VE (96k RAM. 512k Flash)",
|
||||
"upload": {
|
||||
"disable_flushing": false,
|
||||
"maximum_ram_size": 98304,
|
||||
"maximum_size": 514288,
|
||||
"protocol": "stlink",
|
||||
"protocols": [
|
||||
"stlink",
|
||||
"dfu",
|
||||
"jlink"
|
||||
],
|
||||
"require_upload_port": true,
|
||||
"use_1200bps_touch": false,
|
||||
"wait_for_upload_port": false
|
||||
},
|
||||
"url": "https://www.st.com/en/evaluation-tools/steval-3dp001v1.html",
|
||||
"vendor": "Generic"
|
||||
}
|
||||
@@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 48K - 40
|
||||
rom (rx) : ORIGIN = 0x08005000, LENGTH = 256K - 20K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@@ -0,0 +1,14 @@
|
||||
MEMORY
|
||||
{
|
||||
ram (rwx) : ORIGIN = 0x20000000, LENGTH = 64K - 40
|
||||
rom (rx) : ORIGIN = 0x08007000, LENGTH = 512K - 28K
|
||||
}
|
||||
|
||||
/* Provide memory region aliases for common.inc */
|
||||
REGION_ALIAS("REGION_TEXT", rom);
|
||||
REGION_ALIAS("REGION_DATA", ram);
|
||||
REGION_ALIAS("REGION_BSS", ram);
|
||||
REGION_ALIAS("REGION_RODATA", rom);
|
||||
|
||||
/* Let common.inc handle the real work. */
|
||||
INCLUDE common.inc
|
||||
@@ -0,0 +1,11 @@
|
||||
import os
|
||||
Import("env")
|
||||
|
||||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/variants/STEVAL_F401VE/ldscript.ld")
|
||||
for i, flag in enumerate(env["LINKFLAGS"]):
|
||||
if "-Wl,-T" in flag:
|
||||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
|
||||
elif flag == "-T":
|
||||
env["LINKFLAGS"][i + 1] = custom_ld_script
|
||||
|
||||
|
||||
@@ -0,0 +1,40 @@
|
||||
import os
|
||||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08005000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08005000"))
|
||||
|
||||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_lite.ld")
|
||||
for i, flag in enumerate(env["LINKFLAGS"]):
|
||||
if "-Wl,-T" in flag:
|
||||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
|
||||
elif flag == "-T":
|
||||
env["LINKFLAGS"][i + 1] = custom_ld_script
|
||||
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'mksLite.bin'
|
||||
def encrypt(source, target, env):
|
||||
import sys
|
||||
|
||||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
robin = open(target[0].dir.path +'/mksLite3.bin', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
position = 0
|
||||
try:
|
||||
while position < length:
|
||||
byte = firmware.read(1)
|
||||
if position >= 320 and position < 31040:
|
||||
byte = chr(ord(byte) ^ key[position & 31])
|
||||
if sys.version_info[0] > 2:
|
||||
byte = bytes(byte, 'latin1')
|
||||
robin.write(byte)
|
||||
position += 1
|
||||
finally:
|
||||
firmware.close()
|
||||
robin.close()
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
@@ -0,0 +1,39 @@
|
||||
import os
|
||||
Import("env")
|
||||
|
||||
# Relocate firmware from 0x08000000 to 0x08007000
|
||||
for define in env['CPPDEFINES']:
|
||||
if define[0] == "VECT_TAB_ADDR":
|
||||
env['CPPDEFINES'].remove(define)
|
||||
env['CPPDEFINES'].append(("VECT_TAB_ADDR", "0x08007000"))
|
||||
|
||||
custom_ld_script = os.path.abspath("buildroot/share/PlatformIO/ldscripts/mks_robin_pro.ld")
|
||||
for i, flag in enumerate(env["LINKFLAGS"]):
|
||||
if "-Wl,-T" in flag:
|
||||
env["LINKFLAGS"][i] = "-Wl,-T" + custom_ld_script
|
||||
elif flag == "-T":
|
||||
env["LINKFLAGS"][i + 1] = custom_ld_script
|
||||
|
||||
# Encrypt ${PROGNAME}.bin and save it as 'Robin.bin'
|
||||
def encrypt(source, target, env):
|
||||
import sys
|
||||
|
||||
key = [0xA3, 0xBD, 0xAD, 0x0D, 0x41, 0x11, 0xBB, 0x8D, 0xDC, 0x80, 0x2D, 0xD0, 0xD2, 0xC4, 0x9B, 0x1E, 0x26, 0xEB, 0xE3, 0x33, 0x4A, 0x15, 0xE4, 0x0A, 0xB3, 0xB1, 0x3C, 0x93, 0xBB, 0xAF, 0xF7, 0x3E]
|
||||
|
||||
firmware = open(target[0].path, "rb")
|
||||
robin = open(target[0].dir.path +'/Robin_pro.bin', "wb")
|
||||
length = os.path.getsize(target[0].path)
|
||||
position = 0
|
||||
try:
|
||||
while position < length:
|
||||
byte = firmware.read(1)
|
||||
if position >= 320 and position < 31040:
|
||||
byte = chr(ord(byte) ^ key[position & 31])
|
||||
if sys.version_info[0] > 2:
|
||||
byte = bytes(byte, 'latin1')
|
||||
robin.write(byte)
|
||||
position += 1
|
||||
finally:
|
||||
firmware.close()
|
||||
robin.close()
|
||||
env.AddPostAction("$BUILD_DIR/${PROGNAME}.bin", encrypt);
|
||||
@@ -0,0 +1,340 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2019, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
* Automatically generated from STM32F407Z(E-G)Tx.xml
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
#include <PeripheralPins.h>
|
||||
|
||||
/* =====
|
||||
* Note: Commented lines are alternative possibilities which are not used by default.
|
||||
* If you change them, you should know what you're doing first.
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0 E0_DIR
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1 BLTOUCH_2
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2 BLTOUCH_4
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3 E1_EN
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4 TF_SS
|
||||
{PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5 TF_SCLK
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6 TF_MISO
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7 LED
|
||||
{PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8 HEATER2
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9 HEATER0
|
||||
{PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10 Z_EN
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11 EXP_14
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12 Z_DIR
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13 E0_EN
|
||||
{PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14 EXP_8
|
||||
{PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15 EXP_7
|
||||
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio, 24 ADC
|
||||
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9 TH_0
|
||||
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14 TH_1
|
||||
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15 TH_2
|
||||
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4 TH_3
|
||||
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5 EXP_13
|
||||
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6 EXP_3
|
||||
{PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7 EXP_6
|
||||
{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8 EXP_5
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
const PinMap PinMap_PWM[] = {
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4 HEATER0
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3 HEATER1
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3 HEATER2
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1 BED
|
||||
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3 FAN0
|
||||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1 FAN1
|
||||
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 FAN2
|
||||
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 EXTENSION1-4
|
||||
|
||||
//probably unused on SKR-Pro. confirmation needed, please.
|
||||
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
|
||||
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
|
||||
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
//{PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
//{PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
//{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
//{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
//{PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
//{PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
//{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
//{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
//{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
//{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
//{PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
//{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
//{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
//{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
//{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
//{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
//{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
//{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
//{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
//{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
//{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
//{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
//{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
//{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
//{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
//{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
//{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
//{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
//{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
//{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
//{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
//{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
//{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
//{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
//{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
//{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
//{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
//{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
//{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
//{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
//{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
//{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF5_SPI1)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** CAN ***
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#error "CAN bus isn't available on this board. Driver should be disabled."
|
||||
#endif
|
||||
|
||||
//*** ETHERNET ***
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#error "Ethernet port isn't available on this board. Driver should be disabled."
|
||||
#endif
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_FS[] = {
|
||||
//{PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF used by LCD
|
||||
//{PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS available on wifi port, if empty
|
||||
//{PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID available on UART1_RX if not used
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_USB_OTG_HS[] = { /*
|
||||
#ifdef USE_USB_HS_IN_FS
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
|
||||
{PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
|
||||
{PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
|
||||
#else
|
||||
#error "USB in HS mode isn't supported by the board"
|
||||
{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
|
||||
{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
{PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR
|
||||
{PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT
|
||||
#endif /* USE_USB_HS_IN_FS */
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
@@ -0,0 +1,50 @@
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_FS_SOF = PA_8,
|
||||
USB_OTG_FS_VBUS = PA_9,
|
||||
USB_OTG_FS_ID = PA_10,
|
||||
USB_OTG_FS_DM = PA_11,
|
||||
USB_OTG_FS_DP = PA_12,
|
||||
USB_OTG_HS_ULPI_D0 = PA_3,
|
||||
USB_OTG_HS_SOF = PA_4,
|
||||
USB_OTG_HS_ULPI_CK = PA_5,
|
||||
USB_OTG_HS_ULPI_D1 = PB_0,
|
||||
USB_OTG_HS_ULPI_D2 = PB_1,
|
||||
USB_OTG_HS_ULPI_D7 = PB_5,
|
||||
USB_OTG_HS_ULPI_D3 = PB_10,
|
||||
USB_OTG_HS_ULPI_D4 = PB_11,
|
||||
USB_OTG_HS_ID = PB_12,
|
||||
USB_OTG_HS_ULPI_D5 = PB_12,
|
||||
USB_OTG_HS_ULPI_D6 = PB_13,
|
||||
USB_OTG_HS_VBUS = PB_13,
|
||||
USB_OTG_HS_DM = PB_14,
|
||||
USB_OTG_HS_DP = PB_15,
|
||||
USB_OTG_HS_ULPI_STP = PC_0,
|
||||
USB_OTG_HS_ULPI_DIR = PC_2,
|
||||
USB_OTG_HS_ULPI_NXT = PC_3,
|
||||
#endif
|
||||
@@ -0,0 +1,52 @@
|
||||
#pragma once
|
||||
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
//#define HAL_RTC_MODULE_ENABLED Real Time Clock...do we use it?
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
#define HAL_USART_MODULE_ENABLED
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
//#define HAL_UART_MODULE_ENABLED // by default
|
||||
//#define HAL_PCD_MODULE_ENABLED // Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||
|
||||
#undef HAL_SD_MODULE_ENABLED
|
||||
#undef HAL_DAC_MODULE_ENABLED
|
||||
#undef HAL_FLASH_MODULE_ENABLED
|
||||
#undef HAL_CAN_MODULE_ENABLED
|
||||
#undef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#undef HAL_CEC_MODULE_ENABLED
|
||||
#undef HAL_CRYP_MODULE_ENABLED
|
||||
#undef HAL_DCMI_MODULE_ENABLED
|
||||
#undef HAL_DMA2D_MODULE_ENABLED
|
||||
#undef HAL_ETH_MODULE_ENABLED
|
||||
#undef HAL_NAND_MODULE_ENABLED
|
||||
#undef HAL_NOR_MODULE_ENABLED
|
||||
#undef HAL_PCCARD_MODULE_ENABLED
|
||||
#undef HAL_SRAM_MODULE_ENABLED
|
||||
#undef HAL_SDRAM_MODULE_ENABLED
|
||||
#undef HAL_HASH_MODULE_ENABLED
|
||||
#undef HAL_EXTI_MODULE_ENABLED
|
||||
#undef HAL_SMBUS_MODULE_ENABLED
|
||||
#undef HAL_I2S_MODULE_ENABLED
|
||||
#undef HAL_IWDG_MODULE_ENABLED
|
||||
#undef HAL_LTDC_MODULE_ENABLED
|
||||
#undef HAL_DSI_MODULE_ENABLED
|
||||
#undef HAL_QSPI_MODULE_ENABLED
|
||||
#undef HAL_RNG_MODULE_ENABLED
|
||||
#undef HAL_SAI_MODULE_ENABLED
|
||||
#undef HAL_IRDA_MODULE_ENABLED
|
||||
#undef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#undef HAL_WWDG_MODULE_ENABLED
|
||||
#undef HAL_HCD_MODULE_ENABLED
|
||||
#undef HAL_FMPI2C_MODULE_ENABLED
|
||||
#undef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#undef HAL_DFSDM_MODULE_ENABLED
|
||||
#undef HAL_LPTIM_MODULE_ENABLED
|
||||
#undef HAL_MMC_MODULE_ENABLED
|
||||
@@ -0,0 +1,204 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : LinkerScript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F407ZGTx Device with
|
||||
** 1024KByte FLASH, 128KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20020000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200;; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400;; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x8008000, LENGTH = 1024K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
_siccmram = LOADADDR(.ccmram);
|
||||
|
||||
/* CCM-RAM section
|
||||
*
|
||||
* IMPORTANT NOTE!
|
||||
* If initialized variables will be placed in this section,
|
||||
* the startup code needs to be modified to copy the init-values.
|
||||
*/
|
||||
.ccmram :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sccmram = .; /* create a global symbol at ccmram start */
|
||||
*(.ccmram)
|
||||
*(.ccmram*)
|
||||
|
||||
. = ALIGN(4);
|
||||
_eccmram = .; /* create a global symbol at ccmram end */
|
||||
} >CCMRAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
@@ -0,0 +1,260 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2017, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
// Pin number
|
||||
// This array allows to wrap Arduino pin number(Dx or x)
|
||||
// to STM32 PinName (PX_n)
|
||||
const PinName digitalPin[] = {
|
||||
#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio
|
||||
PC_13, //D0
|
||||
PC_14, //D1 - OSC32_IN
|
||||
PC_15, //D2 - OSC32_OUT
|
||||
PH_0, //D3 - OSC_IN
|
||||
PH_1, //D4 - OSC_OUT
|
||||
PB_2, //D5 - BOOT1
|
||||
PB_10, //D6 - 1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3
|
||||
PB_11, //D7 - 1:I2C2_SDA / USART3_RX / TIM2_CH4
|
||||
PB_12, //D8 - 1:SPI2_NSS / OTG_HS_ID
|
||||
PB_13, //D9 - 1:SPI2_SCK 2:OTG_HS_VBUS
|
||||
PB_14, //D10 - 1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM
|
||||
PB_15, //D11 - SPI2_MOSI / TIM12_CH2 / OTG_HS_DP
|
||||
PC_6, //D12 - 1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1
|
||||
PC_7, //D13 - 1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2
|
||||
PC_8, //D14 - 1:TIM8_CH3 / SDIO_D0 / TIM3_CH3
|
||||
PC_9, //D15 - 1:TIM8_CH4 / SDIO_D1 / TIM3_CH4
|
||||
PA_8, //D16 - 1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF
|
||||
PA_9, //D17 - 1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS
|
||||
PA_10, //D18 - 1:USART1_RX / TIM1_CH3 / OTG_FS_ID
|
||||
PA_11, //D19 - 1:TIM1_CH4 / OTG_FS_DM
|
||||
PA_12, //D20 - 1:OTG_FS_DP
|
||||
PA_13, //D21 - 0:JTMS-SWDIO
|
||||
PA_14, //D22 - 0:JTCK-SWCLK
|
||||
PA_15, //D23 - 0:JTDI 1:SPI3_NSS / SPI1_NSS
|
||||
PC_10, //D24 - 1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX
|
||||
PC_11, //D25 - 1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX
|
||||
PC_12, //D26 - 1:UART5_TX / SPI3_MOSI / SDIO_CK
|
||||
PD_2, //D27 - 1:UART5_RX / SDIO_CMD
|
||||
PB_3, //D28 - 0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK
|
||||
PB_4, //D29 - 0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO
|
||||
PB_5, //D30 - 1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI
|
||||
PB_6, //D31 - 1:I2C1_SCL / TIM4_CH1 / USART1_TX
|
||||
PB_7, //D32 - 1:I2C1_SDA / TIM4_CH2 / USART1_RX
|
||||
PB_8, //D33 - 1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1
|
||||
PB_9, //D34 - 1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS
|
||||
PA_0, //D35/A0 - 1:UART4_TX / TIM5_CH1 2:ADC123_IN0
|
||||
PA_1, //D36/A1 - 1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1
|
||||
PA_2, //D37/A2 - 1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2
|
||||
PA_3, //D38/A3 - 1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3
|
||||
PA_4, //D39/A4 - NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1
|
||||
PA_5, //D40/A5 - NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2
|
||||
PA_6, //D41/A6 - 1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6
|
||||
PA_7, //D42/A7 - 1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7
|
||||
PB_0, //D43/A8 - 1:TIM3_CH3 2:ADC12_IN8
|
||||
PB_1, //D44/A9 - 1:TIM3_CH4 2:ADC12_IN9
|
||||
PC_0, //D45/A10 - 1: 2:ADC123_IN10
|
||||
PC_1, //D46/A11 - 1: 2:ADC123_IN11
|
||||
PC_2, //D47/A12 - 1:SPI2_MISO 2:ADC123_IN12
|
||||
PC_3, //D48/A13 - 1:SPI2_MOSI 2:ADC123_IN13
|
||||
PC_4, //D49/A14 - 1: 2:ADC12_IN14
|
||||
PC_5, //D50/A15 - 1: 2:ADC12_IN15
|
||||
#if STM32F4X_PIN_NUM >= 144
|
||||
PF_3, //D51/A16 - 1:FSMC_A3 2:ADC3_IN9
|
||||
PF_4, //D52/A17 - 1:FSMC_A4 2:ADC3_IN14
|
||||
PF_5, //D53/A18 - 1:FSMC_A5 2:ADC3_IN15
|
||||
PF_6, //D54/A19 - 1:TIM10_CH1 2:ADC3_IN4
|
||||
PF_7, //D55/A20 - 1:TIM11_CH1 2:ADC3_IN5
|
||||
PF_8, //D56/A21 - 1:TIM13_CH1 2:ADC3_IN6
|
||||
PF_9, //D57/A22 - 1;TIM14_CH1 2:ADC3_IN7
|
||||
PF_10, //D58/A23 - 2:ADC3_IN8
|
||||
#endif
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio
|
||||
PE_2, //D59 - 1:FSMC_A23
|
||||
PE_3, //D60 - 1:FSMC_A19
|
||||
PE_4, //D61 - 1:FSMC_A20
|
||||
PE_5, //D62 - 1:FSMC_A21
|
||||
PE_6, //D63 - 1:FSMC_A22
|
||||
PE_7, //D64 - 1:FSMC_D4
|
||||
PE_8, //D65 - 1:FSMC_D5
|
||||
PE_9, //D66 - 1:FSMC_D6 / TIM1_CH1
|
||||
PE_10, //D67 - 1:FSMC_D7
|
||||
PE_11, //D68 - 1:FSMC_D8 / TIM1_CH2
|
||||
PE_12, //D69 - 1:FSMC_D9
|
||||
PE_13, //D70 - 1:FSMC_D10 / TIM1_CH3
|
||||
PE_14, //D71 - 1:FSMC_D11 / TIM1_CH4
|
||||
PE_15, //D72 - 1:FSMC_D12
|
||||
PD_8, //D73 - 1:FSMC_D13 / USART3_TX
|
||||
PD_9, //D74 - 1:FSMC_D14 / USART3_RX
|
||||
PD_10, //D75 - 1:FSMC_D15
|
||||
PD_11, //D76 - 1:FSMC_A16
|
||||
PD_12, //D77 - 1:FSMC_A17 / TIM4_CH1
|
||||
PD_13, //D78 - 1:FSMC_A18 / TIM4_CH2
|
||||
PD_14, //D79 - 1:FSMC_D0 / TIM4_CH3
|
||||
PD_15, //D80 - 1:FSMC_D1 / TIM4_CH4
|
||||
PD_0, //D81 - 1:FSMC_D2
|
||||
PD_1, //D82 - 1:FSMC_D3
|
||||
PD_3, //D83 - 1:FSMC_CLK
|
||||
PD_4, //D84 - 1:FSMC_NOE
|
||||
PD_5, //D85 - 1:USART2_TX
|
||||
PD_6, //D86 - 1:USART2_RX
|
||||
PD_7, //D87
|
||||
PE_0, //D88
|
||||
PE_1, //D89
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
PF_0, //D90 - 1:FSMC_A0 / I2C2_SDA
|
||||
PF_1, //D91 - 1:FSMC_A1 / I2C2_SCL
|
||||
PF_2, //D92 - 1:FSMC_A2
|
||||
PF_11, //D93
|
||||
PF_12, //D94 - 1:FSMC_A6
|
||||
PF_13, //D95 - 1:FSMC_A7
|
||||
PF_14, //D96 - 1:FSMC_A8
|
||||
PF_15, //D97 - 1:FSMC_A9
|
||||
PG_0, //D98 - 1:FSMC_A10
|
||||
PG_1, //D99 - 1:FSMC_A11
|
||||
PG_2, //D100 - 1:FSMC_A12
|
||||
PG_3, //D101 - 1:FSMC_A13
|
||||
PG_4, //D102 - 1:FSMC_A14
|
||||
PG_5, //D103 - 1:FSMC_A15
|
||||
PG_6, //D104
|
||||
PG_7, //D105
|
||||
PG_8, //D106
|
||||
PG_9, //D107 - 1:USART6_RX
|
||||
PG_10, //D108 - 1:FSMC_NE3
|
||||
PG_11, //D109
|
||||
PG_12, //D110 - 1:FSMC_NE4
|
||||
PG_13, //D111 - 1:FSMC_A24
|
||||
PG_14, //D112 - 1:FSMC_A25 / USART6_TX
|
||||
PG_15, //D113
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio
|
||||
PI_8, //D114
|
||||
PI_9, //D115
|
||||
PI_10, //D116
|
||||
PI_11, //D117
|
||||
PH_2, //D118
|
||||
PH_3, //D119
|
||||
PH_4, //D120 - 1:I2C2_SCL
|
||||
PH_5, //D121 - 1:I2C2_SDA
|
||||
PH_6, //D122 - 1:TIM12_CH1
|
||||
PH_7, //D123 - 1:I2C3_SCL
|
||||
PH_8, //D124 - 1:I2C3_SDA
|
||||
PH_9, //D125 - 1:TIM12_CH2
|
||||
PH_10, //D126 - 1:TIM5_CH1
|
||||
PH_11, //D127 - 1:TIM5_CH2
|
||||
PH_12, //D128 - 1:TIM5_CH3
|
||||
PH_13, //D129
|
||||
PH_14, //D130
|
||||
PH_15, //D131
|
||||
PI_0, //D132 - 1:TIM5_CH4 / SPI2_NSS
|
||||
PI_1, //D133 - 1:SPI2_SCK
|
||||
PI_2, //D134 - 1:TIM8_CH4 /SPI2_MISO
|
||||
PI_3, //D135 - 1:SPI2_MOS
|
||||
PI_4, //D136
|
||||
PI_5, //D137 - 1:TIM8_CH1
|
||||
PI_6, //D138 - 1:TIM8_CH2
|
||||
PI_7, //D139 - 1:TIM8_CH3
|
||||
#endif
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
// ------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
WEAK void SystemClock_Config() {
|
||||
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/**Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Configure the Systick interrupt time
|
||||
*/
|
||||
HAL_SYSTICK_Config(HAL_RCC_GetHCLKFreq() / 1000);
|
||||
|
||||
/**Configure the Systick
|
||||
*/
|
||||
HAL_SYSTICK_CLKSourceConfig(SYSTICK_CLKSOURCE_HCLK);
|
||||
|
||||
/* SysTick_IRQn interrupt configuration */
|
||||
HAL_NVIC_SetPriority(SysTick_IRQn, 0, 0);
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,294 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2017, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
#pragma once
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef STM32F405RX
|
||||
#define STM32F4X_PIN_NUM 64 //64 pins mcu, 51 gpio
|
||||
#define STM32F4X_GPIO_NUM 51
|
||||
#define STM32F4X_ADC_NUM 16
|
||||
#elif defined(STM32F407_5VX)
|
||||
#define STM32F4X_PIN_NUM 100 //100 pins mcu, 82 gpio
|
||||
#define STM32F4X_GPIO_NUM 82
|
||||
#define STM32F4X_ADC_NUM 16
|
||||
#elif defined(STM32F407_5ZX)
|
||||
#define STM32F4X_PIN_NUM 144 //144 pins mcu, 114 gpio
|
||||
#define STM32F4X_GPIO_NUM 114
|
||||
#define STM32F4X_ADC_NUM 24
|
||||
#elif defined(STM32F407IX)
|
||||
#define STM32F4X_PIN_NUM 176 //176 pins mcu, 140 gpio
|
||||
#define STM32F4X_GPIO_NUM 140
|
||||
#define STM32F4X_ADC_NUM 24
|
||||
#else
|
||||
#error "no match MCU defined"
|
||||
#endif
|
||||
|
||||
#if STM32F4X_PIN_NUM >= 64 //64 pins mcu, 51 gpio
|
||||
#define PC13 0
|
||||
#define PC14 1 //OSC32_IN
|
||||
#define PC15 2 //OSC32_OUT
|
||||
#define PH0 3 //OSC_IN
|
||||
#define PH1 4 //OSC_OUT
|
||||
#define PB2 5 //BOOT1
|
||||
#define PB10 6 //1:SPI2_SCK / I2C2_SCL / USART3_TX / TIM2_CH3
|
||||
#define PB11 7 //1:I2C2_SDA / USART3_RX / TIM2_CH4
|
||||
#define PB12 8 //1:SPI2_NSS / OTG_HS_ID
|
||||
#define PB13 9 //1:SPI2_SCK 2:OTG_HS_VBUS
|
||||
#define PB14 10 //1:SPI2_MISO / TIM12_CH1 / OTG_HS_DM
|
||||
#define PB15 11 //SPI2_MOSI / TIM12_CH2 / OTG_HS_DP
|
||||
#define PC6 12 //1:TIM8_CH1 / SDIO_D6 / USART6_TX / TIM3_CH1
|
||||
#define PC7 13 //1:TIM8_CH2 / SDIO_D7 / USART6_RX / TIM3_CH2
|
||||
#define PC8 14 //1:TIM8_CH3 / SDIO_D0 / TIM3_CH3
|
||||
#define PC9 15 //1:TIM8_CH4 / SDIO_D1 / TIM3_CH4
|
||||
#define PA8 16 //1:TIM1_CH1 / I2C3_SCL / OTG_FS_SOF
|
||||
#define PA9 17 //1:USART1_TX / TIM1_CH2 2:OTG_FS_VBUS
|
||||
#define PA10 18 //1:USART1_RX / TIM1_CH3 / OTG_FS_ID
|
||||
#define PA11 19 //1:TIM1_CH4 / OTG_FS_DM
|
||||
#define PA12 20 //1:OTG_FS_DP
|
||||
#define PA13 21 //0:JTMS-SWDIO
|
||||
#define PA14 22 //0:JTCK-SWCLK
|
||||
#define PA15 23 //0:JTDI 1:SPI3_NSS / SPI1_NSS
|
||||
#define PC10 24 //1:UART4_TX / SPI3_SCK / SDIO_D2 / USART3_TX
|
||||
#define PC11 25 //1:UART4_RX / SPI3_MISO / SDIO_D3 / USART3_RX
|
||||
#define PC12 26 //1:UART5_TX / SPI3_MOSI / SDIO_CK
|
||||
#define PD2 27 //1:UART5_RX / SDIO_CMD
|
||||
#define PB3 28 //0:JTDO 1:SPI3_SCK / TIM2_CH2 / SPI1_SCK
|
||||
#define PB4 29 //0:NJTRST 1:SPI3_MISO / TIM3_CH1 / SPI1_MISO
|
||||
#define PB5 30 //1:TIM3_CH2 / SPI1_MOSI / SPI3_MOSI
|
||||
#define PB6 31 //1:I2C1_SCL / TIM4_CH1 / USART1_TX
|
||||
#define PB7 32 //1:I2C1_SDA / TIM4_CH2 / USART1_RX
|
||||
#define PB8 33 //1:I2C1_SCL / TIM4_CH3 / SDIO_D4 / TIM10_CH1
|
||||
#define PB9 34 //1:I2C1_SDA / TIM4_CH4 / SDIO_D5 / TIM11_CH1 / SPI2_NSS
|
||||
#define PA0 35 //1:UART4_TX / TIM5_CH1 2:ADC123_IN0
|
||||
#define PA1 36 //1:UART4_RX / TIM5_CH2 / TIM2_CH2 2:ADC123_IN1
|
||||
#define PA2 37 //1:USART2_TX /TIM5_CH3 / TIM9_CH1 / TIM2_CH3 2:ADC123_IN2
|
||||
#define PA3 38 //1:USART2_RX /TIM5_CH4 / TIM9_CH2 / TIM2_CH4 2:ADC123_IN3
|
||||
#define PA4 39 //NOT FT 1:SPI1_NSS / SPI3_NSS / USART2_CK 2:ADC12_IN4 / DAC_OUT1
|
||||
#define PA5 40 //NOT FT 1:SPI1_SCK 2:ADC12_IN5 / DAC_OUT2
|
||||
#define PA6 41 //1:SPI1_MISO / TIM13_CH1 / TIM3_CH1 2:ADC12_IN6
|
||||
#define PA7 42 //1:SPI1_MOSI / TIM14_CH1 / TIM3_CH2 2:ADC12_IN7
|
||||
#define PB0 43 //1:TIM3_CH3 2:ADC12_IN8
|
||||
#define PB1 44 //1:TIM3_CH4 2:ADC12_IN9
|
||||
#define PC0 45 //1: 2:ADC123_IN10
|
||||
#define PC1 46 //1: 2:ADC123_IN11
|
||||
#define PC2 47 //1:SPI2_MISO 2:ADC123_IN12
|
||||
#define PC3 48 //1:SPI2_MOSI 2:ADC123_IN13
|
||||
#define PC4 49 //1: 2:ADC12_IN14
|
||||
#define PC5 50 //1: 2:ADC12_IN15
|
||||
#if STM32F4X_PIN_NUM >= 144
|
||||
#define PF3 51 //1:FSMC_A3 2:ADC3_IN9
|
||||
#define PF4 52 //1:FSMC_A4 2:ADC3_IN14
|
||||
#define PF5 53 //1:FSMC_A5 2:ADC3_IN15
|
||||
#define PF6 54 //1:TIM10_CH1 2:ADC3_IN4
|
||||
#define PF7 55 //1:TIM11_CH1 2:ADC3_IN5
|
||||
#define PF8 56 //1:TIM13_CH1 2:ADC3_IN6
|
||||
#define PF9 57 //1;TIM14_CH1 2:ADC3_IN7
|
||||
#define PF10 58 //2:ADC3_IN8
|
||||
#endif
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 100 //100 pins mcu, 82 gpio
|
||||
#define PE2 (35+STM32F4X_ADC_NUM) //1:FSMC_A23
|
||||
#define PE3 (36+STM32F4X_ADC_NUM) //1:FSMC_A19
|
||||
#define PE4 (37+STM32F4X_ADC_NUM) //1:FSMC_A20
|
||||
#define PE5 (38+STM32F4X_ADC_NUM) //1:FSMC_A21
|
||||
#define PE6 (39+STM32F4X_ADC_NUM) //1:FSMC_A22
|
||||
#define PE7 (40+STM32F4X_ADC_NUM) //1:FSMC_D4
|
||||
#define PE8 (41+STM32F4X_ADC_NUM) //1:FSMC_D5
|
||||
#define PE9 (42+STM32F4X_ADC_NUM) //1:FSMC_D6 / TIM1_CH1
|
||||
#define PE10 (43+STM32F4X_ADC_NUM) //1:FSMC_D7
|
||||
#define PE11 (44+STM32F4X_ADC_NUM) //1:FSMC_D8 / TIM1_CH2
|
||||
#define PE12 (45+STM32F4X_ADC_NUM) //1:FSMC_D9
|
||||
#define PE13 (46+STM32F4X_ADC_NUM) //1:FSMC_D10 / TIM1_CH3
|
||||
#define PE14 (47+STM32F4X_ADC_NUM) //1:FSMC_D11 / TIM1_CH4
|
||||
#define PE15 (48+STM32F4X_ADC_NUM) //1:FSMC_D12
|
||||
#define PD8 (49+STM32F4X_ADC_NUM) //1:FSMC_D13 / USART3_TX
|
||||
#define PD9 (50+STM32F4X_ADC_NUM) //1:FSMC_D14 / USART3_RX
|
||||
#define PD10 (51+STM32F4X_ADC_NUM) //1:FSMC_D15
|
||||
#define PD11 (52+STM32F4X_ADC_NUM) //1:FSMC_A16
|
||||
#define PD12 (53+STM32F4X_ADC_NUM) //1:FSMC_A17 / TIM4_CH1
|
||||
#define PD13 (54+STM32F4X_ADC_NUM) //1:FSMC_A18 / TIM4_CH2
|
||||
#define PD14 (55+STM32F4X_ADC_NUM) //1:FSMC_D0 / TIM4_CH3
|
||||
#define PD15 (56+STM32F4X_ADC_NUM) //1:FSMC_D1 / TIM4_CH4
|
||||
#define PD0 (57+STM32F4X_ADC_NUM) //1:FSMC_D2
|
||||
#define PD1 (58+STM32F4X_ADC_NUM) //1:FSMC_D3
|
||||
#define PD3 (59+STM32F4X_ADC_NUM) //1:FSMC_CLK
|
||||
#define PD4 (60+STM32F4X_ADC_NUM) //1:FSMC_NOE
|
||||
#define PD5 (61+STM32F4X_ADC_NUM) //1:USART2_TX
|
||||
#define PD6 (62+STM32F4X_ADC_NUM) //1:USART2_RX
|
||||
#define PD7 (63+STM32F4X_ADC_NUM)
|
||||
#define PE0 (64+STM32F4X_ADC_NUM)
|
||||
#define PE1 (65+STM32F4X_ADC_NUM)
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
#define PF0 (66+STM32F4X_ADC_NUM) //1:FSMC_A0 / I2C2_SDA
|
||||
#define PF1 (67+STM32F4X_ADC_NUM) //1:FSMC_A1 / I2C2_SCL
|
||||
#define PF2 (68+STM32F4X_ADC_NUM) //1:FSMC_A2
|
||||
#define PF11 (69+STM32F4X_ADC_NUM)
|
||||
#define PF12 (70+STM32F4X_ADC_NUM) //1:FSMC_A6
|
||||
#define PF13 (71+STM32F4X_ADC_NUM) //1:FSMC_A7
|
||||
#define PF14 (72+STM32F4X_ADC_NUM) //1:FSMC_A8
|
||||
#define PF15 (73+STM32F4X_ADC_NUM) //1:FSMC_A9
|
||||
#define PG0 (74+STM32F4X_ADC_NUM) //1:FSMC_A10
|
||||
#define PG1 (75+STM32F4X_ADC_NUM) //1:FSMC_A11
|
||||
#define PG2 (76+STM32F4X_ADC_NUM) //1:FSMC_A12
|
||||
#define PG3 (77+STM32F4X_ADC_NUM) //1:FSMC_A13
|
||||
#define PG4 (78+STM32F4X_ADC_NUM) //1:FSMC_A14
|
||||
#define PG5 (79+STM32F4X_ADC_NUM) //1:FSMC_A15
|
||||
#define PG6 (80+STM32F4X_ADC_NUM)
|
||||
#define PG7 (81+STM32F4X_ADC_NUM)
|
||||
#define PG8 (82+STM32F4X_ADC_NUM)
|
||||
#define PG9 (83+STM32F4X_ADC_NUM) //1:USART6_RX
|
||||
#define PG10 (84+STM32F4X_ADC_NUM) //1:FSMC_NE3
|
||||
#define PG11 (85+STM32F4X_ADC_NUM)
|
||||
#define PG12 (86+STM32F4X_ADC_NUM) //1:FSMC_NE4
|
||||
#define PG13 (87+STM32F4X_ADC_NUM) //1:FSMC_A24
|
||||
#define PG14 (88+STM32F4X_ADC_NUM) //1:FSMC_A25 / USART6_TX
|
||||
#define PG15 (89+STM32F4X_ADC_NUM)
|
||||
#endif
|
||||
#if STM32F4X_PIN_NUM >= 176 //176 pins mcu, 140 gpio
|
||||
#define PI8 (90+STM32F4X_ADC_NUM)
|
||||
#define PI9 (91+STM32F4X_ADC_NUM)
|
||||
#define PI10 (92+STM32F4X_ADC_NUM)
|
||||
#define PI11 (93+STM32F4X_ADC_NUM)
|
||||
#define PH2 (94+STM32F4X_ADC_NUM)
|
||||
#define PH3 (95+STM32F4X_ADC_NUM)
|
||||
#define PH4 (96+STM32F4X_ADC_NUM) //1:I2C2_SCL
|
||||
#define PH5 (97+STM32F4X_ADC_NUM) //1:I2C2_SDA
|
||||
#define PH6 (98+STM32F4X_ADC_NUM) //1:TIM12_CH1
|
||||
#define PH7 (99+STM32F4X_ADC_NUM) //1:I2C3_SCL
|
||||
#define PH8 (100+STM32F4X_ADC_NUM) //1:I2C3_SDA
|
||||
#define PH9 (101+STM32F4X_ADC_NUM) //1:TIM12_CH2
|
||||
#define PH10 (102+STM32F4X_ADC_NUM) //1:TIM5_CH1
|
||||
#define PH11 (103+STM32F4X_ADC_NUM) //1:TIM5_CH2
|
||||
#define PH12 (104+STM32F4X_ADC_NUM) //1:TIM5_CH3
|
||||
#define PH13 (105+STM32F4X_ADC_NUM)
|
||||
#define PH14 (106+STM32F4X_ADC_NUM)
|
||||
#define PH15 (107+STM32F4X_ADC_NUM)
|
||||
#define PI0 (108+STM32F4X_ADC_NUM) //1:TIM5_CH4 / SPI2_NSS
|
||||
#define PI1 (109+STM32F4X_ADC_NUM) //1:SPI2_SCK
|
||||
#define PI2 (110+STM32F4X_ADC_NUM) //1:TIM8_CH4 /SPI2_MISO
|
||||
#define PI3 (111+STM32F4X_ADC_NUM) //1:SPI2_MOS
|
||||
#define PI4 (112+STM32F4X_ADC_NUM)
|
||||
#define PI5 (113+STM32F4X_ADC_NUM) //1:TIM8_CH1
|
||||
#define PI6 (114+STM32F4X_ADC_NUM) //1:TIM8_CH2
|
||||
#define PI7 (115+STM32F4X_ADC_NUM) //1:TIM8_CH3
|
||||
#endif
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS (STM32F4X_GPIO_NUM)
|
||||
// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS (STM32F4X_ADC_NUM)
|
||||
#define NUM_ANALOG_FIRST 35
|
||||
|
||||
// Below ADC, DAC and PWM definitions already done in the core
|
||||
// Could be redefined here if needed
|
||||
// ADC resolution is 12bits
|
||||
//#define ADC_RESOLUTION 12
|
||||
//#define DACC_RESOLUTION 12
|
||||
|
||||
// PWM resolution
|
||||
/*
|
||||
* BEWARE:
|
||||
* Changing this value from the default (1000) will affect the PWM output value of analogWrite (to a PWM pin)
|
||||
* Since the pin is toggled on capture, if you change the frequency of the timer you have to adapt the compare value (analogWrite thinks you did)
|
||||
*/
|
||||
//#define PWM_FREQUENCY 20000
|
||||
//The bottom values are the default and don't need to be redefined
|
||||
//#define PWM_RESOLUTION 8
|
||||
//#define PWM_MAX_DUTY_CYCLE 255
|
||||
|
||||
// Below SPI and I2C definitions already done in the core
|
||||
// Could be redefined here if differs from the default one
|
||||
// SPI Definitions
|
||||
#define PIN_SPI_MOSI PB15
|
||||
#define PIN_SPI_MISO PB14
|
||||
#define PIN_SPI_SCK PB13
|
||||
#define PIN_SPI_SS PB12
|
||||
|
||||
// I2C Definitions
|
||||
#define PIN_WIRE_SDA PB7
|
||||
#define PIN_WIRE_SCL PB6
|
||||
|
||||
// Timer Definitions
|
||||
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
|
||||
#define TIMER_TONE TIM6
|
||||
#define TIMER_SERIAL TIM7
|
||||
|
||||
// Do not use basic timer: OC is required
|
||||
#define TIMER_SERVO TIM2 //TODO: advanced-control timers don't work
|
||||
|
||||
// UART Definitions
|
||||
// Define here Serial instance number to map on Serial generic name
|
||||
#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2)
|
||||
// DEBUG_UART could be redefined to print on another instance than 'Serial'
|
||||
//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3
|
||||
// DEBUG_UART baudrate, default: 9600 if not defined
|
||||
//#define DEBUG_UART_BAUDRATE x
|
||||
// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
|
||||
//#define DEBUG_PINNAME_TX PX_n // PinName used for TX
|
||||
|
||||
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||
// Mandatory for Firmata
|
||||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
@@ -123,12 +123,18 @@ const PinMap PinMap_PWM[] = {
|
||||
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2 FAN2
|
||||
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4 EXTENSION1-4
|
||||
|
||||
//probably unused on SKR-Pro. confirmation needed, please.
|
||||
/**
|
||||
* Unused by specifications on SKR-Pro.
|
||||
* Uncomment the corresponding line if you want to have HardwarePWM on some pins.
|
||||
* WARNING: check timers' usage first to avoid conflicts.
|
||||
* If you don't know what you're doing leave things as they are or you WILL break something (including hardware)
|
||||
* If you alter this section DO NOT report bugs to Marlin team since they are most likely caused by you. Thank you.
|
||||
*/
|
||||
//{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
//{PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2 is bltouch analog?
|
||||
//{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
//{PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3 is bltouch analog?
|
||||
//{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
//{PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
//{PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
//{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
@@ -198,63 +204,63 @@ const PinMap PinMap_PWM[] = {
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
//{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
//{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
//{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
//{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
//{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
//{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
//{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
//{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
//{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
#if STM32F4X_PIN_NUM >= 144 //144 pins mcu, 114 gpio
|
||||
{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
//{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
#endif
|
||||
{NC, NP, 0}
|
||||
};
|
||||
|
||||
@@ -232,6 +232,10 @@ extern "C" {
|
||||
//#define PWM_RESOLUTION 8
|
||||
//#define PWM_MAX_DUTY_CYCLE 255
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_BUILTIN PA7
|
||||
//#define LED_GREEN LED_BUILTIN should be defined here but omitted to avoid redefinition in SailfishRGB_LED
|
||||
|
||||
// Below SPI and I2C definitions already done in the core
|
||||
// Could be redefined here if differs from the default one
|
||||
// SPI Definitions
|
||||
@@ -246,15 +250,20 @@ extern "C" {
|
||||
|
||||
// Timer Definitions
|
||||
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
|
||||
#define TIMER_TONE TIM6
|
||||
#define TIMER_TONE TIM2
|
||||
#define TIMER_SERIAL TIM7
|
||||
|
||||
// Do not use basic timer: OC is required
|
||||
#define TIMER_SERVO TIM2 //TODO: advanced-control timers don't work
|
||||
#define TIMER_SERVO TIM6 //TODO: advanced-control timers don't work
|
||||
|
||||
// UART Definitions
|
||||
// Define here Serial instance number to map on Serial generic name
|
||||
#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2)
|
||||
//#define ENABLE_HWSERIAL1 done automatically by the #define SERIAL_UART_INSTANCE below
|
||||
#define ENABLE_HWSERIAL3
|
||||
#define ENABLE_HWSERIAL6
|
||||
|
||||
// Define here Serial instance number to map on Serial generic name (if not already used by SerialUSB)
|
||||
#define SERIAL_UART_INSTANCE 1 //1 for Serial = Serial1 (USART1)
|
||||
|
||||
// DEBUG_UART could be redefined to print on another instance than 'Serial'
|
||||
//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3
|
||||
// DEBUG_UART baudrate, default: 9600 if not defined
|
||||
@@ -267,6 +276,19 @@ extern "C" {
|
||||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
// Optional PIN_SERIALn_RX and PIN_SERIALn_TX where 'n' is the U(S)ART number
|
||||
// Used when user instanciate a hardware Serial using its peripheral name.
|
||||
// Example: HardwareSerial mySerial(USART3);
|
||||
// will use PIN_SERIAL3_RX and PIN_SERIAL3_TX if defined.
|
||||
#define PIN_SERIAL1_RX PA10
|
||||
#define PIN_SERIAL1_TX PA9
|
||||
#define PIN_SERIAL3_RX PD9
|
||||
#define PIN_SERIAL3_TX PD8
|
||||
#define PIN_SERIAL6_RX PC7
|
||||
#define PIN_SERIAL6_TX PC6
|
||||
//#define PIN_SERIALLP1_RX x // For LPUART1 RX
|
||||
//#define PIN_SERIALLP1_TX x // For LPUART1 TX
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
@@ -290,6 +312,8 @@ extern "C" {
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#define SERIAL_PORT_HARDWARE_OPEN Serial3
|
||||
#define SERIAL_PORT_HARDWARE_OPEN1 Serial6
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,419 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2019, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
* Automatically generated from STM32F407Z(E-G)Tx.xml
|
||||
*/
|
||||
#include <Arduino.h>
|
||||
#include <PeripheralPins.h>
|
||||
|
||||
|
||||
/* =====
|
||||
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
// {PA_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC2_IN0
|
||||
// {PA_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC3_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
// {PA_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC2_IN1
|
||||
// {PA_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC3_IN1
|
||||
// {PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC2_IN2
|
||||
// {PA_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC3_IN2
|
||||
// {PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
// {PA_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC2_IN3
|
||||
{PA_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC3_IN3
|
||||
{PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
// {PA_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC2_IN4
|
||||
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
{PA_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC2_IN5
|
||||
{PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
// {PA_6, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC2_IN6
|
||||
{PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
// {PA_7, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC2_IN7
|
||||
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
{PB_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC2_IN8
|
||||
{PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
// {PB_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC2_IN9
|
||||
// {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
// {PC_0, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC2_IN10
|
||||
{PC_0, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC3_IN10
|
||||
{PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
// {PC_1, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC2_IN11
|
||||
// {PC_1, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC3_IN11
|
||||
// {PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_2, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC2_IN12
|
||||
// {PC_2, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC3_IN12
|
||||
// {PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
// {PC_3, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC2_IN13
|
||||
{PC_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC3_IN13
|
||||
// {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
{PC_4, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC2_IN14
|
||||
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{PC_5, ADC2, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC2_IN15
|
||||
{PF_3, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC3_IN9
|
||||
{PF_4, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC3_IN14
|
||||
{PF_5, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC3_IN15
|
||||
{PF_6, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC3_IN4
|
||||
{PF_7, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC3_IN5
|
||||
{PF_8, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC3_IN6
|
||||
// {PF_9, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC3_IN7
|
||||
{PF_10, ADC3, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC3_IN8
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** DAC ***
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
const PinMap PinMap_DAC[] = {
|
||||
{PA_4, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // DAC_OUT1
|
||||
{PA_5, DAC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // DAC_OUT2
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SDA[] = {
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_11, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PF_0, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
const PinMap PinMap_I2C_SCL[] = {
|
||||
{PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
{PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{PF_1, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
const PinMap PinMap_PWM[] = {
|
||||
{PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
{PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
{PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_5, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
{PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
// {PA_6, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
// {PA_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 1)}, // TIM8_CH1N
|
||||
// {PA_7, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
// {PB_0, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
// {PB_1, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
{PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
{PB_11, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
{PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_14, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 1)}, // TIM8_CH2N
|
||||
{PB_14, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 1, 0)}, // TIM12_CH1
|
||||
{PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_15, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 1)}, // TIM8_CH3N
|
||||
{PB_15, TIM12, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM12, 2, 0)}, // TIM12_CH2
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_6, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 1, 0)}, // TIM8_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
{PC_7, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 2, 0)}, // TIM8_CH2
|
||||
{PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
{PC_8, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 3, 0)}, // TIM8_CH3
|
||||
{PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PC_9, TIM8, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM8, 4, 0)}, // TIM8_CH4
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
{PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
{PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
{PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
{PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
{PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{PF_6, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
{PF_7, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PF_8, TIM13, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM13, 1, 0)}, // TIM13_CH1
|
||||
{PF_9, TIM14, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF9_TIM14, 1, 0)}, // TIM14_CH1
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_TX[] = {
|
||||
{PA_0, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PC_10, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_10, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_12, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_8, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PG_14, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RX[] = {
|
||||
{PA_1, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PC_11, UART4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART4)},
|
||||
{PC_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_2, UART5, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_UART5)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_9, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PG_9, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_RTS[] = {
|
||||
{PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_14, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_12, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PG_8, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
const PinMap PinMap_UART_CTS[] = {
|
||||
{PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PB_13, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PD_11, USART3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART3)},
|
||||
{PG_13, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PG_15, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
{PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** CAN ***
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_RD[] = {
|
||||
{PA_11, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_5, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_8, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_12, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PD_0, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
const PinMap PinMap_CAN_TD[] = {
|
||||
{PA_12, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_6, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PB_9, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{PB_13, CAN2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN2)},
|
||||
{PD_1, CAN1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF9_CAN1)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** ETHERNET ***
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
const PinMap PinMap_Ethernet[] = {
|
||||
{PA_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS
|
||||
{PA_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_REF_CLK|ETH_RX_CLK
|
||||
{PA_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDIO
|
||||
{PA_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_COL
|
||||
{PA_7, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_CRS_DV|ETH_RX_DV
|
||||
{PB_0, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD2
|
||||
{PB_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD3
|
||||
{PB_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
|
||||
{PB_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
{PB_10, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RX_ER
|
||||
{PB_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
|
||||
{PB_12, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
|
||||
{PB_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
|
||||
{PC_1, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_MDC
|
||||
{PC_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD2
|
||||
{PC_3, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_CLK
|
||||
{PC_4, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD0
|
||||
{PC_5, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_RXD1
|
||||
{PE_2, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD3
|
||||
{PG_8, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_PPS_OUT
|
||||
{PG_11, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TX_EN
|
||||
{PG_13, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD0
|
||||
{PG_14, ETH, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF11_ETH)}, // ETH_TXD1
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_FS[] = {
|
||||
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
const PinMap PinMap_USB_OTG_HS[] = {
|
||||
#ifdef USE_USB_HS_IN_FS
|
||||
{PA_4, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_SOF
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_ID
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_HS_VBUS
|
||||
{PB_14, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DM
|
||||
{PB_15, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_OTG_HS_FS)}, // USB_OTG_HS_DP
|
||||
#else
|
||||
{PA_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D0
|
||||
{PA_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_CK
|
||||
{PB_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D1
|
||||
{PB_1, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D2
|
||||
{PB_5, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D7
|
||||
{PB_10, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D3
|
||||
{PB_11, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D4
|
||||
{PB_12, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D5
|
||||
{PB_13, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_D6
|
||||
{PC_0, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_STP
|
||||
{PC_2, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_DIR
|
||||
{PC_3, USB_OTG_HS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_HS)}, // USB_OTG_HS_ULPI_NXT
|
||||
#endif /* USE_USB_HS_IN_FS */
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
@@ -0,0 +1,50 @@
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_FS_SOF = PA_8,
|
||||
USB_OTG_FS_VBUS = PA_9,
|
||||
USB_OTG_FS_ID = PA_10,
|
||||
USB_OTG_FS_DM = PA_11,
|
||||
USB_OTG_FS_DP = PA_12,
|
||||
USB_OTG_HS_ULPI_D0 = PA_3,
|
||||
USB_OTG_HS_SOF = PA_4,
|
||||
USB_OTG_HS_ULPI_CK = PA_5,
|
||||
USB_OTG_HS_ULPI_D1 = PB_0,
|
||||
USB_OTG_HS_ULPI_D2 = PB_1,
|
||||
USB_OTG_HS_ULPI_D7 = PB_5,
|
||||
USB_OTG_HS_ULPI_D3 = PB_10,
|
||||
USB_OTG_HS_ULPI_D4 = PB_11,
|
||||
USB_OTG_HS_ID = PB_12,
|
||||
USB_OTG_HS_ULPI_D5 = PB_12,
|
||||
USB_OTG_HS_ULPI_D6 = PB_13,
|
||||
USB_OTG_HS_VBUS = PB_13,
|
||||
USB_OTG_HS_DM = PB_14,
|
||||
USB_OTG_HS_DP = PB_15,
|
||||
USB_OTG_HS_ULPI_STP = PC_0,
|
||||
USB_OTG_HS_ULPI_DIR = PC_2,
|
||||
USB_OTG_HS_ULPI_NXT = PC_3,
|
||||
#endif
|
||||
@@ -0,0 +1,207 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
|
||||
** File : lscript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F407(VZ)(EG)Tx Device with
|
||||
** 512/1024KByte FLASH, 128KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20020000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200;; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400;; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 128K
|
||||
CCMRAM (rw) : ORIGIN = 0x10000000, LENGTH = 64K
|
||||
FLASH (rx) : ORIGIN = 0x8008000, LENGTH = 1024K -32K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata ALIGN(4):
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
_siccmram = LOADADDR(.ccmram);
|
||||
|
||||
/* CCM-RAM section
|
||||
*
|
||||
* IMPORTANT NOTE!
|
||||
* If initialized variables will be placed in this section,
|
||||
* the startup code needs to be modified to copy the init-values.
|
||||
*/
|
||||
.ccmram :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sccmram = .; /* create a global symbol at ccmram start */
|
||||
*(.ccmram)
|
||||
*(.ccmram*)
|
||||
|
||||
. = ALIGN(4);
|
||||
_eccmram = .; /* create a global symbol at ccmram end */
|
||||
} >CCMRAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,210 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2017, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#include "pins_arduino.h"
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
|
||||
const PinName digitalPin[] = {
|
||||
PB_12,
|
||||
PB_13,
|
||||
PB_14,
|
||||
PB_15,
|
||||
PD_8,
|
||||
PD_9,
|
||||
PD_10,
|
||||
PD_11,
|
||||
PD_12,
|
||||
PD_13,
|
||||
PD_14,
|
||||
PD_15,
|
||||
PG_2,
|
||||
PG_3,
|
||||
PG_4,
|
||||
PG_5,
|
||||
PG_6,
|
||||
PG_7,
|
||||
PG_8,
|
||||
PC_6,
|
||||
PC_7,
|
||||
PC_8,
|
||||
PC_9,
|
||||
PA_8,
|
||||
PA_9,
|
||||
PA_10,
|
||||
PA_11,
|
||||
PA_12,
|
||||
PA_13,
|
||||
PA_14,
|
||||
PA_15,
|
||||
PC_10,
|
||||
PC_11,
|
||||
PC_12,
|
||||
PD_0,
|
||||
PD_1,
|
||||
PD_2,
|
||||
PD_3,
|
||||
PD_4,
|
||||
PD_5,
|
||||
PD_6,
|
||||
PD_7,
|
||||
PG_9,
|
||||
PG_10,
|
||||
PG_11,
|
||||
PG_12,
|
||||
PG_13,
|
||||
PG_14,
|
||||
PG_15,
|
||||
PB_3,
|
||||
PB_4,
|
||||
PB_5,
|
||||
PB_6,
|
||||
PB_7,
|
||||
PB_8,
|
||||
PB_9,
|
||||
PB_10,
|
||||
PB_11,
|
||||
PE_14,
|
||||
PE_15,
|
||||
PE_12,
|
||||
PE_13,
|
||||
PE_10,
|
||||
PE_11,
|
||||
PE_8,
|
||||
PE_9,
|
||||
PG_1,
|
||||
PE_7,
|
||||
PF_15,
|
||||
PG_0,
|
||||
PF_13,
|
||||
PF_14,
|
||||
PF_11,
|
||||
PF_12,
|
||||
PB_2,
|
||||
PB_1,
|
||||
PC_5,
|
||||
PB_0,
|
||||
PA_7,
|
||||
PC_4,
|
||||
PA_5,
|
||||
PA_6,
|
||||
PA_3,
|
||||
PA_4,
|
||||
PA_1,
|
||||
PA_2,
|
||||
PC_3,
|
||||
PA_0,
|
||||
PC_1,
|
||||
PC_2,
|
||||
PC_0,
|
||||
PF_8,
|
||||
PF_6,
|
||||
PF_7,
|
||||
PF_9,
|
||||
PF_10,
|
||||
PF_4,
|
||||
PF_5,
|
||||
PF_2,
|
||||
PF_3,
|
||||
PF_0,
|
||||
PF_1,
|
||||
PE_6,
|
||||
PC_13,
|
||||
PE_4,
|
||||
PE_5,
|
||||
PE_2,
|
||||
PE_3,
|
||||
PE_0,
|
||||
PE_1,
|
||||
PC_14,
|
||||
PC_15,
|
||||
};
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
// ----------------------------------------------------------------------------
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/**
|
||||
* @brief System Clock Configuration
|
||||
* @param None
|
||||
* @retval None
|
||||
*/
|
||||
WEAK void SystemClock_Config(void)
|
||||
{
|
||||
|
||||
RCC_OscInitTypeDef RCC_OscInitStruct;
|
||||
RCC_ClkInitTypeDef RCC_ClkInitStruct;
|
||||
|
||||
/**Configure the main internal regulator output voltage
|
||||
*/
|
||||
__HAL_RCC_PWR_CLK_ENABLE();
|
||||
|
||||
__HAL_PWR_VOLTAGESCALING_CONFIG(PWR_REGULATOR_VOLTAGE_SCALE1);
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_OscInitStruct.OscillatorType = RCC_OSCILLATORTYPE_HSE;
|
||||
RCC_OscInitStruct.HSEState = RCC_HSE_ON;
|
||||
RCC_OscInitStruct.PLL.PLLState = RCC_PLL_ON;
|
||||
RCC_OscInitStruct.PLL.PLLSource = RCC_PLLSOURCE_HSE;
|
||||
RCC_OscInitStruct.PLL.PLLM = 8;
|
||||
RCC_OscInitStruct.PLL.PLLN = 336;
|
||||
RCC_OscInitStruct.PLL.PLLP = RCC_PLLP_DIV2;
|
||||
RCC_OscInitStruct.PLL.PLLQ = 7;
|
||||
if (HAL_RCC_OscConfig(&RCC_OscInitStruct) != HAL_OK) {
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
|
||||
/**Initializes the CPU, AHB and APB busses clocks
|
||||
*/
|
||||
RCC_ClkInitStruct.ClockType = RCC_CLOCKTYPE_HCLK | RCC_CLOCKTYPE_SYSCLK
|
||||
| RCC_CLOCKTYPE_PCLK1 | RCC_CLOCKTYPE_PCLK2;
|
||||
RCC_ClkInitStruct.SYSCLKSource = RCC_SYSCLKSOURCE_PLLCLK;
|
||||
RCC_ClkInitStruct.AHBCLKDivider = RCC_SYSCLK_DIV1;
|
||||
RCC_ClkInitStruct.APB1CLKDivider = RCC_HCLK_DIV4;
|
||||
RCC_ClkInitStruct.APB2CLKDivider = RCC_HCLK_DIV2;
|
||||
|
||||
if (HAL_RCC_ClockConfig(&RCC_ClkInitStruct, FLASH_LATENCY_5) != HAL_OK) {
|
||||
_Error_Handler(__FILE__, __LINE__);
|
||||
}
|
||||
}
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
@@ -0,0 +1,238 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2017, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#pragma once
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
// Left Side
|
||||
#define PB12 0
|
||||
#define PB13 1
|
||||
#define PB14 2
|
||||
#define PB15 3
|
||||
#define PD8 4
|
||||
#define PD9 5
|
||||
#define PD10 6
|
||||
#define PD11 7
|
||||
#define PD12 8
|
||||
#define PD13 9
|
||||
#define PD14 10
|
||||
#define PD15 11
|
||||
#define PG2 12
|
||||
#define PG3 13
|
||||
#define PG4 14
|
||||
#define PG5 15
|
||||
#define PG6 16
|
||||
#define PG7 17
|
||||
#define PG8 18
|
||||
#define PC6 19
|
||||
#define PC7 20
|
||||
#define PC8 21
|
||||
#define PC9 22
|
||||
#define PA8 23
|
||||
#define PA9 24
|
||||
#define PA10 25
|
||||
#define PA11 26 // USB_DM
|
||||
#define PA12 27 // USB_DP
|
||||
#define PA13 28
|
||||
#define PA14 29
|
||||
#define PA15 30
|
||||
#define PC10 31
|
||||
#define PC11 32
|
||||
#define PC12 33
|
||||
#define PD0 34
|
||||
#define PD1 35
|
||||
#define PD2 36
|
||||
#define PD3 37
|
||||
#define PD4 38
|
||||
#define PD5 39
|
||||
#define PD6 40
|
||||
#define PD7 41
|
||||
#define PG9 42
|
||||
#define PG10 43
|
||||
#define PG11 44
|
||||
#define PG12 45
|
||||
#define PG13 46
|
||||
#define PG14 47
|
||||
#define PG15 48
|
||||
#define PB3 49
|
||||
#define PB4 50
|
||||
#define PB5 51
|
||||
#define PB6 52
|
||||
#define PB7 53
|
||||
#define PB8 54
|
||||
#define PB9 55
|
||||
|
||||
// Right Side
|
||||
#define PB10 56
|
||||
#define PB11 57
|
||||
#define PE14 58
|
||||
#define PE15 59
|
||||
#define PE12 60
|
||||
#define PE13 61
|
||||
#define PE10 62
|
||||
#define PE11 63
|
||||
#define PE8 64
|
||||
#define PE9 65
|
||||
#define PG1 66
|
||||
#define PE7 67
|
||||
#define PF15 68
|
||||
#define PG0 69
|
||||
#define PF13 70
|
||||
#define PF14 71
|
||||
#define PF11 72
|
||||
#define PF12 73
|
||||
#define PB2 74
|
||||
#define PB1 75 // A0
|
||||
#define PC5 76 // A1
|
||||
#define PB0 77 // A2
|
||||
#define PA7 78 // A3
|
||||
#define PC4 79 // A4
|
||||
#define PA5 80 // A5
|
||||
#define PA6 81 // A6
|
||||
#define PA3 82 // A7
|
||||
#define PA4 83 // A8
|
||||
#define PA1 84 // A9
|
||||
#define PA2 85 // A10
|
||||
#define PC3 86 // A11
|
||||
#define PA0 87 // A12/PA_0(WK_UP): BUT K_UP)
|
||||
#define PC1 88 // A13
|
||||
#define PC2 89 // A14
|
||||
#define PC0 90 // A15
|
||||
#define PF8 91 // A16
|
||||
#define PF6 92 // A17
|
||||
#define PF7 93 // A18
|
||||
#define PF9 94 // LED D1 (active low)
|
||||
#define PF10 95 // LED D2 (active low)
|
||||
#define PF4 96
|
||||
#define PF5 97
|
||||
#define PF2 98
|
||||
#define PF3 99
|
||||
#define PF0 100
|
||||
#define PF1 101
|
||||
#define PE6 102
|
||||
#define PC13 103
|
||||
#define PE4 104 // BUT K0
|
||||
#define PE5 105 // BUT K1
|
||||
#define PE2 106
|
||||
#define PE3 107
|
||||
#define PE0 108
|
||||
#define PE1 109
|
||||
#define PC14 110
|
||||
#define PC15 111
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 112
|
||||
// This must be a literal with a value less than or equal to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS 23
|
||||
#define NUM_ANALOG_FIRST 75
|
||||
|
||||
|
||||
// Below SPI and I2C definitions already done in the core
|
||||
// Could be redefined here if differs from the default one
|
||||
// SPI Definitions
|
||||
#define PIN_SPI_SS PF11
|
||||
#define PIN_SPI_MOSI PB15
|
||||
#define PIN_SPI_MISO PB14
|
||||
#define PIN_SPI_SCK PB13
|
||||
|
||||
|
||||
|
||||
//max6675
|
||||
//#define PIN_SPI_SS PA4
|
||||
//#define PIN_SPI_SCK PA5
|
||||
//#define PIN_SPI_MISO PA6
|
||||
//#define PIN_SPI_MOSI PA7
|
||||
|
||||
|
||||
|
||||
|
||||
// I2C Definitions
|
||||
#define PIN_WIRE_SDA PB7
|
||||
#define PIN_WIRE_SCL PB6
|
||||
|
||||
// Timer Definitions
|
||||
//Do not use timer used by PWM pins when possible. See PinMap_PWM in PeripheralPins.c
|
||||
#define TIMER_TONE TIM6
|
||||
|
||||
// Do not use basic timer: OC is required
|
||||
#define TIMER_SERVO TIM1 //TODO: advanced-control timers don't work
|
||||
|
||||
// UART Definitions
|
||||
// Define here Serial instance number to map on Serial generic name
|
||||
#define SERIAL_UART_INSTANCE 1 //ex: 2 for Serial2 (USART2)
|
||||
// DEBUG_UART could be redefined to print on another instance than 'Serial'
|
||||
//#define DEBUG_UART ((USART_TypeDef *) U(S)ARTX) // ex: USART3
|
||||
// DEBUG_UART baudrate, default: 9600 if not defined
|
||||
//#define DEBUG_UART_BAUDRATE x
|
||||
// DEBUG_UART Tx pin name, default: the first one found in PinMap_UART_TX for DEBUG_UART
|
||||
//#define DEBUG_PINNAME_TX PX_n // PinName used for TX
|
||||
|
||||
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||
// Mandatory for Firmata
|
||||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
/* Extra HAL modules */
|
||||
//#define HAL_DAC_MODULE_ENABLED
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
|
||||
@@ -0,0 +1,274 @@
|
||||
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2019, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
*******************************************************************************
|
||||
* Automatically generated from STM32F401V(D-E)Tx.xml
|
||||
*/
|
||||
#include "Arduino.h"
|
||||
#include "PeripheralPins.h"
|
||||
|
||||
/* =====
|
||||
* Note: Commented lines are alternative possibilities which are not used per default.
|
||||
* If you change them, you will have to know what you do
|
||||
* =====
|
||||
*/
|
||||
|
||||
//*** ADC ***
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_ADC[] = {
|
||||
{PA_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 0, 0)}, // ADC1_IN0
|
||||
{PA_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 1, 0)}, // ADC1_IN1
|
||||
{PA_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 2, 0)}, // ADC1_IN2
|
||||
{PA_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 3, 0)}, // ADC1_IN3
|
||||
// {PA_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 4, 0)}, // ADC1_IN4
|
||||
// {PA_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 5, 0)}, // ADC1_IN5
|
||||
// {PA_6, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 6, 0)}, // ADC1_IN6
|
||||
// {PA_7, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 7, 0)}, // ADC1_IN7
|
||||
// {PB_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 8, 0)}, // ADC1_IN8
|
||||
// {PB_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 9, 0)}, // ADC1_IN9
|
||||
// {PC_0, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 10, 0)}, // ADC1_IN10
|
||||
// {PC_1, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 11, 0)}, // ADC1_IN11
|
||||
{PC_2, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 12, 0)}, // ADC1_IN12
|
||||
{PC_3, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 13, 0)}, // ADC1_IN13
|
||||
// {PC_4, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 14, 0)}, // ADC1_IN14
|
||||
// {PC_5, ADC1, STM_PIN_DATA_EXT(STM_MODE_ANALOG, GPIO_NOPULL, 0, 15, 0)}, // ADC1_IN15
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No DAC ***
|
||||
|
||||
//*** I2C ***
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SDA[] = {
|
||||
// {PB_3, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C2)},
|
||||
// {PB_4, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF9_I2C3)},
|
||||
{PB_7, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
// {PB_9, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
// {PC_9, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_I2C_SCL[] = {
|
||||
// {PA_8, I2C3, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C3)},
|
||||
{PB_6, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
// {PB_8, I2C1, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C1)},
|
||||
// {PB_10, I2C2, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_NOPULL, GPIO_AF4_I2C2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** PWM ***
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_PWM[] = {
|
||||
// {PA_0, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_0, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 1, 0)}, // TIM5_CH1
|
||||
// {PA_1, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PA_1, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 2, 0)}, // TIM5_CH2
|
||||
// {PA_2, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PA_2, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 3, 0)}, // TIM5_CH3
|
||||
// {PA_2, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
// {PA_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 4, 0)}, // TIM2_CH4
|
||||
// {PA_3, TIM5, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM5, 4, 0)}, // TIM5_CH4
|
||||
// {PA_3, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
// {PA_5, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PA_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
// {PA_7, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
// {PA_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
// {PA_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
// {PA_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
// {PA_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
// {PA_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
// {PA_15, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 1, 0)}, // TIM2_CH1
|
||||
// {PB_0, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
{PB_0, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
// {PB_1, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PB_1, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
// {PB_3, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 2, 0)}, // TIM2_CH2
|
||||
// {PB_4, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
// {PB_5, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
// {PB_6, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
// {PB_7, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
// {PB_8, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
// {PB_8, TIM10, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM10, 1, 0)}, // TIM10_CH1
|
||||
// {PB_9, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
// {PB_9, TIM11, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM11, 1, 0)}, // TIM11_CH1
|
||||
{PB_10, TIM2, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM2, 3, 0)}, // TIM2_CH3
|
||||
// {PB_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
// {PB_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
// {PB_15, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
{PC_6, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 1, 0)}, // TIM3_CH1
|
||||
{PC_7, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 2, 0)}, // TIM3_CH2
|
||||
// {PC_8, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 3, 0)}, // TIM3_CH3
|
||||
// {PC_9, TIM3, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM3, 4, 0)}, // TIM3_CH4
|
||||
{PD_12, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 1, 0)}, // TIM4_CH1
|
||||
{PD_13, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 2, 0)}, // TIM4_CH2
|
||||
{PD_14, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 3, 0)}, // TIM4_CH3
|
||||
{PD_15, TIM4, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF2_TIM4, 4, 0)}, // TIM4_CH4
|
||||
{PE_5, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 1, 0)}, // TIM9_CH1
|
||||
// {PE_6, TIM9, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF3_TIM9, 2, 0)}, // TIM9_CH2
|
||||
// {PE_8, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 1)}, // TIM1_CH1N
|
||||
// {PE_9, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 1, 0)}, // TIM1_CH1
|
||||
// {PE_10, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 1)}, // TIM1_CH2N
|
||||
// {PE_11, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 2, 0)}, // TIM1_CH2
|
||||
// {PE_12, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 1)}, // TIM1_CH3N
|
||||
// {PE_13, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 3, 0)}, // TIM1_CH3
|
||||
{PE_14, TIM1, STM_PIN_DATA_EXT(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF1_TIM1, 4, 0)}, // TIM1_CH4
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SERIAL ***
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_TX[] = {
|
||||
// {PA_2, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_9, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
// {PA_11, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PB_6, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
// {PC_6, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PD_5, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RX[] = {
|
||||
// {PA_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{PA_10, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
// {PA_12, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
// {PB_7, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
// {PC_7, USART6, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF8_USART6)},
|
||||
{PD_6, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_RTS[] = {
|
||||
// {PA_1, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
// {PA_12, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PD_4, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_UART_CTS[] = {
|
||||
// {PA_0, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
// {PA_11, USART1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART1)},
|
||||
{PD_3, USART2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF7_USART2)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** SPI ***
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MOSI[] = {
|
||||
{PA_7, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_5, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_15, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PC_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PC_12, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PD_6, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PE_6, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
// {PE_14, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_MISO[] = {
|
||||
{PA_6, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
{PB_14, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PC_2, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PC_11, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PE_5, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
// {PE_13, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SCLK[] = {
|
||||
{PA_5, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_3, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PB_3, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PB_10, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_13, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PC_10, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PD_3, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PE_2, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
// {PE_12, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SPI_SSEL[] = {
|
||||
{PA_4, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PA_4, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PA_15, SPI1, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI1)},
|
||||
// {PA_15, SPI3, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF6_SPI3)},
|
||||
// {PB_9, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
{PB_12, SPI2, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI2)},
|
||||
// {PE_4, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
// {PE_11, SPI4, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF5_SPI4)},
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No CAN ***
|
||||
|
||||
//*** No ETHERNET ***
|
||||
|
||||
//*** No QUADSPI ***
|
||||
|
||||
//*** USB ***
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_USB_OTG_FS[] = {
|
||||
// {PA_8, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_SOF
|
||||
// {PA_9, USB_OTG_FS, STM_PIN_DATA(STM_MODE_INPUT, GPIO_NOPULL, GPIO_AF_NONE)}, // USB_OTG_FS_VBUS
|
||||
// {PA_10, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_OD, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_ID
|
||||
{PA_11, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DM
|
||||
{PA_12, USB_OTG_FS, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF10_OTG_FS)}, // USB_OTG_FS_DP
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
|
||||
//*** No USB_OTG_HS ***
|
||||
//*** SD ***
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
WEAK const PinMap PinMap_SD[] = {
|
||||
// {PB_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D4
|
||||
// {PB_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D5
|
||||
// {PC_6, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D6
|
||||
// {PC_7, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D7
|
||||
{PC_8, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D0
|
||||
{PC_9, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D1
|
||||
{PC_10, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D2
|
||||
{PC_11, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_PULLUP, GPIO_AF12_SDIO)}, // SDIO_D3
|
||||
{PC_12, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CK
|
||||
{PD_2, SDIO, STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_SDIO)}, // SDIO_CMD
|
||||
{NC, NP, 0}
|
||||
};
|
||||
#endif
|
||||
@@ -0,0 +1,33 @@
|
||||
/* SYS_WKUP */
|
||||
#ifdef PWR_WAKEUP_PIN1
|
||||
SYS_WKUP1 = PA_0,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN2
|
||||
SYS_WKUP2 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN3
|
||||
SYS_WKUP3 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN4
|
||||
SYS_WKUP4 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN5
|
||||
SYS_WKUP5 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN6
|
||||
SYS_WKUP6 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN7
|
||||
SYS_WKUP7 = NC,
|
||||
#endif
|
||||
#ifdef PWR_WAKEUP_PIN8
|
||||
SYS_WKUP8 = NC,
|
||||
#endif
|
||||
/* USB */
|
||||
#ifdef USBCON
|
||||
USB_OTG_FS_SOF = PA_8,
|
||||
USB_OTG_FS_VBUS = PA_9,
|
||||
USB_OTG_FS_ID = PA_10,
|
||||
USB_OTG_FS_DM = PA_11,
|
||||
USB_OTG_FS_DP = PA_12,
|
||||
#endif
|
||||
@@ -0,0 +1,496 @@
|
||||
/**
|
||||
******************************************************************************
|
||||
* @file stm32f4xx_hal_conf.h
|
||||
* @brief HAL configuration file.
|
||||
******************************************************************************
|
||||
* @attention
|
||||
*
|
||||
* <h2><center>© Copyright (c) 2017 STMicroelectronics.
|
||||
* All rights reserved.</center></h2>
|
||||
*
|
||||
* This software component is licensed by ST under BSD 3-Clause license,
|
||||
* the "License"; You may not use this file except in compliance with the
|
||||
* License. You may obtain a copy of the License at:
|
||||
* opensource.org/licenses/BSD-3-Clause
|
||||
*
|
||||
******************************************************************************
|
||||
*/
|
||||
|
||||
/* Define to prevent recursive inclusion -------------------------------------*/
|
||||
#ifndef __STM32F4xx_HAL_CONF_CUSTOM
|
||||
#define __STM32F4xx_HAL_CONF_CUSTOM
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif
|
||||
|
||||
/* Exported types ------------------------------------------------------------*/
|
||||
/* Exported constants --------------------------------------------------------*/
|
||||
|
||||
/* ########################## Module Selection ############################## */
|
||||
/**
|
||||
* @brief This is the list of modules to be used in the HAL driver
|
||||
*/
|
||||
#define HAL_MODULE_ENABLED
|
||||
#define HAL_ADC_MODULE_ENABLED
|
||||
/* #define HAL_CAN_MODULE_ENABLED */
|
||||
/* #define HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
#define HAL_CRC_MODULE_ENABLED
|
||||
/* #define HAL_CEC_MODULE_ENABLED */
|
||||
/* #define HAL_CRYP_MODULE_ENABLED */
|
||||
//#define HAL_DAC_MODULE_ENABLED
|
||||
/* #define HAL_DCMI_MODULE_ENABLED */
|
||||
#define HAL_DMA_MODULE_ENABLED
|
||||
/* #define HAL_DMA2D_MODULE_ENABLED */
|
||||
/* #define HAL_ETH_MODULE_ENABLED */
|
||||
#define HAL_FLASH_MODULE_ENABLED
|
||||
/* #define HAL_NAND_MODULE_ENABLED */
|
||||
/* #define HAL_NOR_MODULE_ENABLED */
|
||||
/* #define HAL_PCCARD_MODULE_ENABLED */
|
||||
/* #define HAL_SRAM_MODULE_ENABLED */
|
||||
/* #define HAL_SDRAM_MODULE_ENABLED */
|
||||
/* #define HAL_HASH_MODULE_ENABLED */
|
||||
#define HAL_GPIO_MODULE_ENABLED
|
||||
/* #define HAL_EXTI_MODULE_ENABLED */
|
||||
#define HAL_I2C_MODULE_ENABLED
|
||||
/* #define HAL_SMBUS_MODULE_ENABLED */
|
||||
/* #define HAL_I2S_MODULE_ENABLED */
|
||||
/* #define HAL_IWDG_MODULE_ENABLED */
|
||||
/* #define HAL_LTDC_MODULE_ENABLED */
|
||||
/* #define HAL_DSI_MODULE_ENABLED */
|
||||
#define HAL_PWR_MODULE_ENABLED
|
||||
/* #define HAL_QSPI_MODULE_ENABLED */
|
||||
#define HAL_RCC_MODULE_ENABLED
|
||||
/* #define HAL_RNG_MODULE_ENABLED */
|
||||
#define HAL_RTC_MODULE_ENABLED
|
||||
/* #define HAL_SAI_MODULE_ENABLED */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
#define HAL_SPI_MODULE_ENABLED
|
||||
#define HAL_TIM_MODULE_ENABLED
|
||||
/* #define HAL_UART_MODULE_ENABLED */
|
||||
/* #define HAL_USART_MODULE_ENABLED */
|
||||
/* #define HAL_IRDA_MODULE_ENABLED */
|
||||
/* #define HAL_SMARTCARD_MODULE_ENABLED */
|
||||
/* #define HAL_WWDG_MODULE_ENABLED */
|
||||
#define HAL_CORTEX_MODULE_ENABLED
|
||||
#ifndef HAL_PCD_MODULE_ENABLED
|
||||
#define HAL_PCD_MODULE_ENABLED //Since STM32 v3.10700.191028 this is automatically added if any type of USB is enabled (as in Arduino IDE)
|
||||
#endif
|
||||
/* #define HAL_HCD_MODULE_ENABLED */
|
||||
/* #define HAL_FMPI2C_MODULE_ENABLED */
|
||||
/* #define HAL_SPDIFRX_MODULE_ENABLED */
|
||||
/* #define HAL_DFSDM_MODULE_ENABLED */
|
||||
/* #define HAL_LPTIM_MODULE_ENABLED */
|
||||
/* #define HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* ########################## HSE/HSI Values adaptation ##################### */
|
||||
/**
|
||||
* @brief Adjust the value of External High Speed oscillator (HSE) used in your application.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSE is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSE_VALUE
|
||||
#define HSE_VALUE 8000000U /*!< Value of the External oscillator in Hz */
|
||||
#endif /* HSE_VALUE */
|
||||
|
||||
#ifndef HSE_STARTUP_TIMEOUT
|
||||
#define HSE_STARTUP_TIMEOUT 100U /*!< Time out for HSE start up, in ms */
|
||||
#endif /* HSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief Internal High Speed oscillator (HSI) value.
|
||||
* This value is used by the RCC HAL module to compute the system frequency
|
||||
* (when HSI is used as system clock source, directly or through the PLL).
|
||||
*/
|
||||
#ifndef HSI_VALUE
|
||||
#define HSI_VALUE 16000000U /*!< Value of the Internal oscillator in Hz */
|
||||
#endif /* HSI_VALUE */
|
||||
|
||||
/**
|
||||
* @brief Internal Low Speed oscillator (LSI) value.
|
||||
*/
|
||||
#ifndef LSI_VALUE
|
||||
#define LSI_VALUE 32000U /*!< LSI Typical Value in Hz */
|
||||
#endif /* LSI_VALUE */ /*!< Value of the Internal Low Speed oscillator in Hz
|
||||
The real value may vary depending on the variations
|
||||
in voltage and temperature. */
|
||||
/**
|
||||
* @brief External Low Speed oscillator (LSE) value.
|
||||
*/
|
||||
#ifndef LSE_VALUE
|
||||
#define LSE_VALUE 32768U /*!< Value of the External Low Speed oscillator in Hz */
|
||||
#endif /* LSE_VALUE */
|
||||
|
||||
#ifndef LSE_STARTUP_TIMEOUT
|
||||
#define LSE_STARTUP_TIMEOUT 5000U /*!< Time out for LSE start up, in ms */
|
||||
#endif /* LSE_STARTUP_TIMEOUT */
|
||||
|
||||
/**
|
||||
* @brief External clock source for I2S peripheral
|
||||
* This value is used by the I2S HAL module to compute the I2S clock source
|
||||
* frequency, this source is inserted directly through I2S_CKIN pad.
|
||||
*/
|
||||
#ifndef EXTERNAL_CLOCK_VALUE
|
||||
#define EXTERNAL_CLOCK_VALUE 12288000U /*!< Value of the External oscillator in Hz*/
|
||||
#endif /* EXTERNAL_CLOCK_VALUE */
|
||||
|
||||
/* Tip: To avoid modifying this file each time you need to use different HSE,
|
||||
=== you can define the HSE value in your toolchain compiler preprocessor. */
|
||||
|
||||
/* ########################### System Configuration ######################### */
|
||||
/**
|
||||
* @brief This is the HAL system configuration section
|
||||
*/
|
||||
#if !defined (VDD_VALUE)
|
||||
#define VDD_VALUE 3300U /*!< Value of VDD in mv */
|
||||
#endif
|
||||
#if !defined (TICK_INT_PRIORITY)
|
||||
#define TICK_INT_PRIORITY 0x00U /*!< tick interrupt priority */
|
||||
#endif
|
||||
#if !defined (USE_RTOS)
|
||||
#define USE_RTOS 0U
|
||||
#endif
|
||||
#if !defined (PREFETCH_ENABLE)
|
||||
#define PREFETCH_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (INSTRUCTION_CACHE_ENABLE)
|
||||
#define INSTRUCTION_CACHE_ENABLE 1U
|
||||
#endif
|
||||
#if !defined (DATA_CACHE_ENABLE)
|
||||
#define DATA_CACHE_ENABLE 1U
|
||||
#endif
|
||||
|
||||
#define USE_HAL_ADC_REGISTER_CALLBACKS 0U /* ADC register callback disabled */
|
||||
#define USE_HAL_CAN_REGISTER_CALLBACKS 0U /* CAN register callback disabled */
|
||||
#define USE_HAL_CEC_REGISTER_CALLBACKS 0U /* CEC register callback disabled */
|
||||
#define USE_HAL_CRYP_REGISTER_CALLBACKS 0U /* CRYP register callback disabled */
|
||||
#define USE_HAL_DAC_REGISTER_CALLBACKS 0U /* DAC register callback disabled */
|
||||
#define USE_HAL_DCMI_REGISTER_CALLBACKS 0U /* DCMI register callback disabled */
|
||||
#define USE_HAL_DFSDM_REGISTER_CALLBACKS 0U /* DFSDM register callback disabled */
|
||||
#define USE_HAL_DMA2D_REGISTER_CALLBACKS 0U /* DMA2D register callback disabled */
|
||||
#define USE_HAL_DSI_REGISTER_CALLBACKS 0U /* DSI register callback disabled */
|
||||
#define USE_HAL_ETH_REGISTER_CALLBACKS 0U /* ETH register callback disabled */
|
||||
#define USE_HAL_HASH_REGISTER_CALLBACKS 0U /* HASH register callback disabled */
|
||||
#define USE_HAL_HCD_REGISTER_CALLBACKS 0U /* HCD register callback disabled */
|
||||
#define USE_HAL_I2C_REGISTER_CALLBACKS 0U /* I2C register callback disabled */
|
||||
#define USE_HAL_FMPI2C_REGISTER_CALLBACKS 0U /* FMPI2C register callback disabled */
|
||||
#define USE_HAL_I2S_REGISTER_CALLBACKS 0U /* I2S register callback disabled */
|
||||
#define USE_HAL_IRDA_REGISTER_CALLBACKS 0U /* IRDA register callback disabled */
|
||||
#define USE_HAL_LPTIM_REGISTER_CALLBACKS 0U /* LPTIM register callback disabled */
|
||||
#define USE_HAL_LTDC_REGISTER_CALLBACKS 0U /* LTDC register callback disabled */
|
||||
#define USE_HAL_MMC_REGISTER_CALLBACKS 0U /* MMC register callback disabled */
|
||||
#define USE_HAL_NAND_REGISTER_CALLBACKS 0U /* NAND register callback disabled */
|
||||
#define USE_HAL_NOR_REGISTER_CALLBACKS 0U /* NOR register callback disabled */
|
||||
#define USE_HAL_PCCARD_REGISTER_CALLBACKS 0U /* PCCARD register callback disabled */
|
||||
#define USE_HAL_PCD_REGISTER_CALLBACKS 0U /* PCD register callback disabled */
|
||||
#define USE_HAL_QSPI_REGISTER_CALLBACKS 0U /* QSPI register callback disabled */
|
||||
#define USE_HAL_RNG_REGISTER_CALLBACKS 0U /* RNG register callback disabled */
|
||||
#define USE_HAL_RTC_REGISTER_CALLBACKS 0U /* RTC register callback disabled */
|
||||
#define USE_HAL_SAI_REGISTER_CALLBACKS 0U /* SAI register callback disabled */
|
||||
#define USE_HAL_SD_REGISTER_CALLBACKS 0U /* SD register callback disabled */
|
||||
#define USE_HAL_SMARTCARD_REGISTER_CALLBACKS 0U /* SMARTCARD register callback disabled */
|
||||
#define USE_HAL_SDRAM_REGISTER_CALLBACKS 0U /* SDRAM register callback disabled */
|
||||
#define USE_HAL_SRAM_REGISTER_CALLBACKS 0U /* SRAM register callback disabled */
|
||||
#define USE_HAL_SPDIFRX_REGISTER_CALLBACKS 0U /* SPDIFRX register callback disabled */
|
||||
#define USE_HAL_SMBUS_REGISTER_CALLBACKS 0U /* SMBUS register callback disabled */
|
||||
#define USE_HAL_SPI_REGISTER_CALLBACKS 0U /* SPI register callback disabled */
|
||||
#define USE_HAL_TIM_REGISTER_CALLBACKS 0U /* TIM register callback disabled */
|
||||
#define USE_HAL_UART_REGISTER_CALLBACKS 0U /* UART register callback disabled */
|
||||
#define USE_HAL_USART_REGISTER_CALLBACKS 0U /* USART register callback disabled */
|
||||
#define USE_HAL_WWDG_REGISTER_CALLBACKS 0U /* WWDG register callback disabled */
|
||||
|
||||
/* ########################## Assert Selection ############################## */
|
||||
/**
|
||||
* @brief Uncomment the line below to expanse the "assert_param" macro in the
|
||||
* HAL drivers code
|
||||
*/
|
||||
/* #define USE_FULL_ASSERT 1U */
|
||||
|
||||
/* ################## Ethernet peripheral configuration ##################### */
|
||||
|
||||
/* Section 1 : Ethernet peripheral configuration */
|
||||
|
||||
/* MAC ADDRESS: MAC_ADDR0:MAC_ADDR1:MAC_ADDR2:MAC_ADDR3:MAC_ADDR4:MAC_ADDR5 */
|
||||
#define MAC_ADDR0 2U
|
||||
#define MAC_ADDR1 0U
|
||||
#define MAC_ADDR2 0U
|
||||
#define MAC_ADDR3 0U
|
||||
#define MAC_ADDR4 0U
|
||||
#define MAC_ADDR5 0U
|
||||
|
||||
/* Definition of the Ethernet driver buffers size and count */
|
||||
#define ETH_RX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for receive */
|
||||
#define ETH_TX_BUF_SIZE ETH_MAX_PACKET_SIZE /* buffer size for transmit */
|
||||
#define ETH_RXBUFNB ((uint32_t)4U) /* 4 Rx buffers of size ETH_RX_BUF_SIZE */
|
||||
#define ETH_TXBUFNB ((uint32_t)4U) /* 4 Tx buffers of size ETH_TX_BUF_SIZE */
|
||||
|
||||
/* Section 2: PHY configuration section */
|
||||
|
||||
/* DP83848_PHY_ADDRESS Address*/
|
||||
#define DP83848_PHY_ADDRESS 0x01U
|
||||
/* PHY Reset delay these values are based on a 1 ms Systick interrupt*/
|
||||
#define PHY_RESET_DELAY 0x000000FFU
|
||||
/* PHY Configuration delay */
|
||||
#define PHY_CONFIG_DELAY 0x00000FFFU
|
||||
|
||||
#define PHY_READ_TO 0x0000FFFFU
|
||||
#define PHY_WRITE_TO 0x0000FFFFU
|
||||
|
||||
/* Section 3: Common PHY Registers */
|
||||
|
||||
#define PHY_BCR ((uint16_t)0x0000) /*!< Transceiver Basic Control Register */
|
||||
#define PHY_BSR ((uint16_t)0x0001) /*!< Transceiver Basic Status Register */
|
||||
|
||||
#define PHY_RESET ((uint16_t)0x8000) /*!< PHY Reset */
|
||||
#define PHY_LOOPBACK ((uint16_t)0x4000) /*!< Select loop-back mode */
|
||||
#define PHY_FULLDUPLEX_100M ((uint16_t)0x2100) /*!< Set the full-duplex mode at 100 Mb/s */
|
||||
#define PHY_HALFDUPLEX_100M ((uint16_t)0x2000) /*!< Set the half-duplex mode at 100 Mb/s */
|
||||
#define PHY_FULLDUPLEX_10M ((uint16_t)0x0100) /*!< Set the full-duplex mode at 10 Mb/s */
|
||||
#define PHY_HALFDUPLEX_10M ((uint16_t)0x0000) /*!< Set the half-duplex mode at 10 Mb/s */
|
||||
#define PHY_AUTONEGOTIATION ((uint16_t)0x1000) /*!< Enable auto-negotiation function */
|
||||
#define PHY_RESTART_AUTONEGOTIATION ((uint16_t)0x0200) /*!< Restart auto-negotiation function */
|
||||
#define PHY_POWERDOWN ((uint16_t)0x0800) /*!< Select the power down mode */
|
||||
#define PHY_ISOLATE ((uint16_t)0x0400) /*!< Isolate PHY from MII */
|
||||
|
||||
#define PHY_AUTONEGO_COMPLETE ((uint16_t)0x0020) /*!< Auto-Negotiation process completed */
|
||||
#define PHY_LINKED_STATUS ((uint16_t)0x0004) /*!< Valid link established */
|
||||
#define PHY_JABBER_DETECTION ((uint16_t)0x0002) /*!< Jabber condition detected */
|
||||
|
||||
/* Section 4: Extended PHY Registers */
|
||||
#define PHY_SR ((uint16_t)0x10U) /*!< PHY status register Offset */
|
||||
|
||||
#define PHY_SPEED_STATUS ((uint16_t)0x0002U) /*!< PHY Speed mask */
|
||||
#define PHY_DUPLEX_STATUS ((uint16_t)0x0004U) /*!< PHY Duplex mask */
|
||||
|
||||
/* ################## SPI peripheral configuration ########################## */
|
||||
|
||||
/* CRC FEATURE: Use to activate CRC feature inside HAL SPI Driver
|
||||
* Activated: CRC code is present inside driver
|
||||
* Deactivated: CRC code cleaned from driver
|
||||
*/
|
||||
#ifndef USE_SPI_CRC
|
||||
#define USE_SPI_CRC 0U
|
||||
#endif
|
||||
|
||||
/* Includes ------------------------------------------------------------------*/
|
||||
/**
|
||||
* @brief Include module's header file
|
||||
*/
|
||||
|
||||
#ifdef HAL_RCC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rcc.h"
|
||||
#endif /* HAL_RCC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_GPIO_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_gpio.h"
|
||||
#endif /* HAL_GPIO_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_EXTI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_exti.h"
|
||||
#endif /* HAL_EXTI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma.h"
|
||||
#endif /* HAL_DMA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CORTEX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cortex.h"
|
||||
#endif /* HAL_CORTEX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ADC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_adc.h"
|
||||
#endif /* HAL_ADC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can.h"
|
||||
#endif /* HAL_CAN_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CAN_LEGACY_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_can_legacy.h"
|
||||
#endif /* HAL_CAN_LEGACY_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_crc.h"
|
||||
#endif /* HAL_CRC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CRYP_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cryp.h"
|
||||
#endif /* HAL_CRYP_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DMA2D_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dma2d.h"
|
||||
#endif /* HAL_DMA2D_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DAC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dac.h"
|
||||
#endif /* HAL_DAC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DCMI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dcmi.h"
|
||||
#endif /* HAL_DCMI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_ETH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_eth.h"
|
||||
#endif /* HAL_ETH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FLASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_flash.h"
|
||||
#endif /* HAL_FLASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sram.h"
|
||||
#endif /* HAL_SRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NOR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nor.h"
|
||||
#endif /* HAL_NOR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_NAND_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_nand.h"
|
||||
#endif /* HAL_NAND_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pccard.h"
|
||||
#endif /* HAL_PCCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SDRAM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sdram.h"
|
||||
#endif /* HAL_SDRAM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HASH_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hash.h"
|
||||
#endif /* HAL_HASH_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2c.h"
|
||||
#endif /* HAL_I2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMBUS_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smbus.h"
|
||||
#endif /* HAL_SMBUS_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_I2S_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_i2s.h"
|
||||
#endif /* HAL_I2S_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_iwdg.h"
|
||||
#endif /* HAL_IWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LTDC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_ltdc.h"
|
||||
#endif /* HAL_LTDC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PWR_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pwr.h"
|
||||
#endif /* HAL_PWR_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RNG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rng.h"
|
||||
#endif /* HAL_RNG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_RTC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_rtc.h"
|
||||
#endif /* HAL_RTC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SAI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sai.h"
|
||||
#endif /* HAL_SAI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_sd.h"
|
||||
#endif /* HAL_SD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spi.h"
|
||||
#endif /* HAL_SPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_TIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_tim.h"
|
||||
#endif /* HAL_TIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_UART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_uart.h"
|
||||
#endif /* HAL_UART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_USART_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_usart.h"
|
||||
#endif /* HAL_USART_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_IRDA_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_irda.h"
|
||||
#endif /* HAL_IRDA_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SMARTCARD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_smartcard.h"
|
||||
#endif /* HAL_SMARTCARD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_WWDG_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_wwdg.h"
|
||||
#endif /* HAL_WWDG_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_PCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_pcd.h"
|
||||
#endif /* HAL_PCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_HCD_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_hcd.h"
|
||||
#endif /* HAL_HCD_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DSI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dsi.h"
|
||||
#endif /* HAL_DSI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_QSPI_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_qspi.h"
|
||||
#endif /* HAL_QSPI_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_CEC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_cec.h"
|
||||
#endif /* HAL_CEC_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_FMPI2C_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_fmpi2c.h"
|
||||
#endif /* HAL_FMPI2C_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_SPDIFRX_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_spdifrx.h"
|
||||
#endif /* HAL_SPDIFRX_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_DFSDM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_dfsdm.h"
|
||||
#endif /* HAL_DFSDM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_LPTIM_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_lptim.h"
|
||||
#endif /* HAL_LPTIM_MODULE_ENABLED */
|
||||
|
||||
#ifdef HAL_MMC_MODULE_ENABLED
|
||||
#include "stm32f4xx_hal_mmc.h"
|
||||
#endif /* HAL_MMC_MODULE_ENABLED */
|
||||
|
||||
/* Exported macro ------------------------------------------------------------*/
|
||||
#ifdef USE_FULL_ASSERT
|
||||
/**
|
||||
* @brief The assert_param macro is used for function's parameters check.
|
||||
* @param expr If expr is false, it calls assert_failed function
|
||||
* which reports the name of the source file and the source
|
||||
* line number of the call that failed.
|
||||
* If expr is true, it returns no value.
|
||||
* @retval None
|
||||
*/
|
||||
#define assert_param(expr) ((expr) ? (void)0U : assert_failed((uint8_t *)__FILE__, __LINE__))
|
||||
/* Exported functions ------------------------------------------------------- */
|
||||
void assert_failed(uint8_t *file, uint32_t line);
|
||||
#else
|
||||
#define assert_param(expr) ((void)0U)
|
||||
#endif /* USE_FULL_ASSERT */
|
||||
|
||||
#ifdef __cplusplus
|
||||
}
|
||||
#endif
|
||||
|
||||
#endif /* __STM32F4xx_HAL_CONF_CUSTOM_H */
|
||||
|
||||
|
||||
/************************ (C) COPYRIGHT STMicroelectronics *****END OF FILE****/
|
||||
@@ -0,0 +1,187 @@
|
||||
/*
|
||||
*****************************************************************************
|
||||
**
|
||||
** File : ldscript.ld
|
||||
**
|
||||
** Abstract : Linker script for STM32F401RETx Device with
|
||||
** 512KByte FLASH, 96KByte RAM
|
||||
**
|
||||
** Set heap size, stack size and stack location according
|
||||
** to application requirements.
|
||||
**
|
||||
** Set memory bank area and size if external memory is used.
|
||||
**
|
||||
** Target : STMicroelectronics STM32
|
||||
**
|
||||
**
|
||||
** Distribution: The file is distributed as is, without any warranty
|
||||
** of any kind.
|
||||
**
|
||||
*****************************************************************************
|
||||
** @attention
|
||||
**
|
||||
** <h2><center>© COPYRIGHT(c) 2014 Ac6</center></h2>
|
||||
**
|
||||
** Redistribution and use in source and binary forms, with or without modification,
|
||||
** are permitted provided that the following conditions are met:
|
||||
** 1. Redistributions of source code must retain the above copyright notice,
|
||||
** this list of conditions and the following disclaimer.
|
||||
** 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
** this list of conditions and the following disclaimer in the documentation
|
||||
** and/or other materials provided with the distribution.
|
||||
** 3. Neither the name of Ac6 nor the names of its contributors
|
||||
** may be used to endorse or promote products derived from this software
|
||||
** without specific prior written permission.
|
||||
**
|
||||
** THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
** AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
** IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
** DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
** FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
** DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
** SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
** CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
** OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
** OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
**
|
||||
*****************************************************************************
|
||||
*/
|
||||
|
||||
/* Entry Point */
|
||||
ENTRY(Reset_Handler)
|
||||
|
||||
/* Highest address of the user mode stack */
|
||||
_estack = 0x20018000; /* end of RAM */
|
||||
/* Generate a link error if heap and stack don't fit into RAM */
|
||||
_Min_Heap_Size = 0x200; /* required amount of heap */
|
||||
_Min_Stack_Size = 0x400; /* required amount of stack */
|
||||
|
||||
/* Specify the memory areas */
|
||||
MEMORY
|
||||
{
|
||||
FLASH (rx) : ORIGIN = 0x08000000, LENGTH = 512K
|
||||
RAM (xrw) : ORIGIN = 0x20000000, LENGTH = 96K
|
||||
}
|
||||
|
||||
/* Define output sections */
|
||||
SECTIONS
|
||||
{
|
||||
/* The startup code goes first into FLASH */
|
||||
.isr_vector :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
KEEP(*(.isr_vector)) /* Startup code */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
/* The program code and other data goes into FLASH */
|
||||
.text :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.text) /* .text sections (code) */
|
||||
*(.text*) /* .text* sections (code) */
|
||||
*(.glue_7) /* glue arm to thumb code */
|
||||
*(.glue_7t) /* glue thumb to arm code */
|
||||
*(.eh_frame)
|
||||
|
||||
KEEP (*(.init))
|
||||
KEEP (*(.fini))
|
||||
|
||||
. = ALIGN(4);
|
||||
_etext = .; /* define a global symbols at end of code */
|
||||
} >FLASH
|
||||
|
||||
/* Constant data goes into FLASH */
|
||||
.rodata :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
*(.rodata) /* .rodata sections (constants, strings, etc.) */
|
||||
*(.rodata*) /* .rodata* sections (constants, strings, etc.) */
|
||||
. = ALIGN(4);
|
||||
} >FLASH
|
||||
|
||||
.ARM.extab : { *(.ARM.extab* .gnu.linkonce.armextab.*) } >FLASH
|
||||
.ARM : {
|
||||
__exidx_start = .;
|
||||
*(.ARM.exidx*)
|
||||
__exidx_end = .;
|
||||
} >FLASH
|
||||
|
||||
.preinit_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__preinit_array_start = .);
|
||||
KEEP (*(.preinit_array*))
|
||||
PROVIDE_HIDDEN (__preinit_array_end = .);
|
||||
} >FLASH
|
||||
.init_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__init_array_start = .);
|
||||
KEEP (*(SORT(.init_array.*)))
|
||||
KEEP (*(.init_array*))
|
||||
PROVIDE_HIDDEN (__init_array_end = .);
|
||||
} >FLASH
|
||||
.fini_array :
|
||||
{
|
||||
PROVIDE_HIDDEN (__fini_array_start = .);
|
||||
KEEP (*(SORT(.fini_array.*)))
|
||||
KEEP (*(.fini_array*))
|
||||
PROVIDE_HIDDEN (__fini_array_end = .);
|
||||
} >FLASH
|
||||
|
||||
/* used by the startup to initialize data */
|
||||
_sidata = LOADADDR(.data);
|
||||
|
||||
/* Initialized data sections goes into RAM, load LMA copy after code */
|
||||
.data :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
_sdata = .; /* create a global symbol at data start */
|
||||
*(.data) /* .data sections */
|
||||
*(.data*) /* .data* sections */
|
||||
|
||||
. = ALIGN(4);
|
||||
_edata = .; /* define a global symbol at data end */
|
||||
} >RAM AT> FLASH
|
||||
|
||||
|
||||
/* Uninitialized data section */
|
||||
. = ALIGN(4);
|
||||
.bss :
|
||||
{
|
||||
/* This is used by the startup in order to initialize the .bss secion */
|
||||
_sbss = .; /* define a global symbol at bss start */
|
||||
__bss_start__ = _sbss;
|
||||
*(.bss)
|
||||
*(.bss*)
|
||||
*(COMMON)
|
||||
|
||||
. = ALIGN(4);
|
||||
_ebss = .; /* define a global symbol at bss end */
|
||||
__bss_end__ = _ebss;
|
||||
} >RAM
|
||||
|
||||
/* User_heap_stack section, used to check that there is enough RAM left */
|
||||
._user_heap_stack :
|
||||
{
|
||||
. = ALIGN(4);
|
||||
PROVIDE ( end = . );
|
||||
PROVIDE ( _end = . );
|
||||
. = . + _Min_Heap_Size;
|
||||
. = . + _Min_Stack_Size;
|
||||
. = ALIGN(4);
|
||||
} >RAM
|
||||
|
||||
|
||||
|
||||
/* Remove information from the standard libraries */
|
||||
/DISCARD/ :
|
||||
{
|
||||
libc.a ( * )
|
||||
libm.a ( * )
|
||||
libgcc.a ( * )
|
||||
}
|
||||
|
||||
.ARM.attributes 0 : { *(.ARM.attributes) }
|
||||
}
|
||||
|
||||
|
||||
@@ -0,0 +1,315 @@
|
||||
/*
|
||||
*******************************************************************************
|
||||
* Copyright (c) 2017, STMicroelectronics
|
||||
* All rights reserved.
|
||||
*
|
||||
* Redistribution and use in source and binary forms, with or without
|
||||
* modification, are permitted provided that the following conditions are met:
|
||||
*
|
||||
* 1. Redistributions of source code must retain the above copyright notice,
|
||||
* this list of conditions and the following disclaimer.
|
||||
* 2. Redistributions in binary form must reproduce the above copyright notice,
|
||||
* this list of conditions and the following disclaimer in the documentation
|
||||
* and/or other materials provided with the distribution.
|
||||
* 3. Neither the name of STMicroelectronics nor the names of its contributors
|
||||
* may be used to endorse or promote products derived from this software
|
||||
* without specific prior written permission.
|
||||
*
|
||||
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
|
||||
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
|
||||
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
|
||||
* DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR CONTRIBUTORS BE LIABLE
|
||||
* FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL
|
||||
* DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
|
||||
* SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
|
||||
* CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY,
|
||||
* OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE
|
||||
* OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
|
||||
*******************************************************************************
|
||||
*/
|
||||
|
||||
#ifndef _VARIANT_ARDUINO_STM32_
|
||||
#define _VARIANT_ARDUINO_STM32_
|
||||
/*----------------------------------------------------------------------------
|
||||
* Headers
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
extern "C" {
|
||||
#endif // __cplusplus
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
#if defined(ARDUINO_STEVAL)
|
||||
|
||||
|
||||
/*----------------------------------------------------------------------------
|
||||
* Pins
|
||||
*----------------------------------------------------------------------------*/
|
||||
// USART1_MAIN
|
||||
#define PA9 0 //TX
|
||||
#define PA10 1 //RX
|
||||
|
||||
// WIFI
|
||||
#define PD3 2 // CTS
|
||||
#define PD4 3 // RTS
|
||||
#define PD5 4 // TX
|
||||
#define PD6 5 // RX
|
||||
#define PB5 6 // WIFI_WAKEUP
|
||||
#define PE11 7 // WIFI_RESET
|
||||
#define PE12 8 // WIFI_BOOT
|
||||
|
||||
// STATUS_LED
|
||||
#define PE1 9 // STATUS_LED
|
||||
|
||||
// SPI USER
|
||||
#define PB12 10 // SPI_CS
|
||||
#define PB15 11 // SPI_MOSI
|
||||
#define PB14 12 // SPI_MISO
|
||||
#define PB13 13 // SPI_SCK
|
||||
|
||||
// I2C USER
|
||||
#define PB7 14 // SDA
|
||||
#define PB6 15 // SCL
|
||||
|
||||
// SPI
|
||||
#define PA4 16 // SPI_CS
|
||||
#define PA5 17 // SPI_SCK
|
||||
#define PA6 18 // SPI_MISO
|
||||
#define PA7 19 // SPI_MOSI
|
||||
|
||||
// JTAG
|
||||
#define PA13 20 // JTAG_TMS/SWDIO
|
||||
#define PA14 21 // JTAG_TCK/SWCLK
|
||||
#define PB3 22 // JTAG_TDO/SWO
|
||||
|
||||
// SDCARD
|
||||
#define PC8 23 // SDIO_D0
|
||||
#define PC9 24 // SDIO_D1
|
||||
#define PA15 25 // SD_CARD_DETECT
|
||||
#define PC10 26 // SDIO_D2
|
||||
#define PC11 27 // SDIO_D3
|
||||
#define PC12 28 // SDIO_CK
|
||||
#define PD2 29 // SDIO_CMD
|
||||
|
||||
// OTG
|
||||
#define PA11 30 //OTG_DM
|
||||
#define PA12 31 //OTG_DP
|
||||
|
||||
// IR/PROBE
|
||||
#define PD1 32 //IR_OUT
|
||||
#define PC1 33 //IR_ON
|
||||
|
||||
// USER_PINS
|
||||
#define PD7 34 // USER3
|
||||
#define PB9 35 // USER1
|
||||
#define PE0 36 // USER2
|
||||
#define PB4 37 // USER4
|
||||
|
||||
// USERKET
|
||||
#define PE7 38 // USER_BUTTON
|
||||
|
||||
// ENDSTOPS
|
||||
#define PD8 39 // X_STOP
|
||||
#define PD9 40 // Y_STOP
|
||||
#define PD10 41 // Z_STOP
|
||||
#define PD11 42 // U_STOP
|
||||
#define PA8 43 // V_STOP
|
||||
#define PD0 44 // W_STOP
|
||||
|
||||
// HEATERS
|
||||
#define PD13 45 // BED_HEAT_2
|
||||
#define PD14 46 // BED_HEAT_1
|
||||
#define PD15 47 // BED_HEAT_3
|
||||
#define PC7 48 // E1_HEAT_PWM
|
||||
#define PB0 49 // E2_HEAT_PWM
|
||||
#define PB1 50 // E3_HEAT_PWM
|
||||
|
||||
// THERMISTOR
|
||||
#define PC2 51 // BED_THERMISTOR_1
|
||||
#define PC3 52 // BED_THERMISTOR_2
|
||||
#define PA3 53 // BED_THERMISTOR_3
|
||||
#define PA0 54 // E1_THERMISTOR
|
||||
#define PA1 55 // E2_THERMISTOR
|
||||
#define PA2 56 // E3_THERMISTOR
|
||||
|
||||
// FANS
|
||||
#define PC4 57 // E1_FAN
|
||||
#define PC5 58 // E2_FAN
|
||||
#define PE8 59 // E3_FAN
|
||||
|
||||
// X_MOTOR
|
||||
#define PE13 60 // X_RESET
|
||||
#define PE14 61 // X_PWM
|
||||
#define PE15 62 // X_DIR
|
||||
|
||||
// Y_MOTOR
|
||||
#define PE10 63 // Y_RESET
|
||||
#define PB10 64 // Y_PWM
|
||||
#define PE9 65 // Y_DIR
|
||||
|
||||
// Z_MOTOR
|
||||
#define PC15 66 // Z_RESET
|
||||
#define PC6 67 // Z_PWM
|
||||
#define PC0 68 // Z_DIR
|
||||
|
||||
// E1_MOTOR
|
||||
#define PC14 69 // E1_RESET
|
||||
#define PC13 70 // E1_DIR
|
||||
#define PD12 71 // E1_PWM
|
||||
|
||||
// E2_MOTOR
|
||||
#define PE4 72 // E2_RESET
|
||||
#define PE5 73 // E2_PWM
|
||||
#define PE6 74 // E2_DIR
|
||||
|
||||
// E3_MOTOR
|
||||
#define PE3 75 // E3_RESET
|
||||
#define PE2 76 // E3_DIR
|
||||
#define PB8 77 // E3_PWM
|
||||
|
||||
// This must be a literal
|
||||
#define NUM_DIGITAL_PINS 78
|
||||
// This must be a literal with a value less than or equal to to MAX_ANALOG_INPUTS
|
||||
#define NUM_ANALOG_INPUTS 6
|
||||
#define NUM_ANALOG_FIRST 51
|
||||
|
||||
// On-board LED pin number
|
||||
#define LED_BUILTIN PE1
|
||||
#define LED_GREEN LED_BUILTIN
|
||||
|
||||
// On-board user button
|
||||
#define USER_BTN PE7
|
||||
|
||||
// UART Definitions
|
||||
#define SERIAL_UART_INSTANCE 1 //Connected to ST-Link
|
||||
|
||||
// Default pin used for 'Serial' instance (ex: ST-Link)
|
||||
// Mandatory for Firmata
|
||||
#define PIN_SERIAL_RX PA10
|
||||
#define PIN_SERIAL_TX PA9
|
||||
|
||||
/* SD detect signal */
|
||||
/*
|
||||
* By default, R67 is not provided, so SD card detect is not used.
|
||||
* Note: SD CD (pin 16 of expansion connector J23) can be connected
|
||||
* to GND in order to be able to use SD_DETECT_PIN
|
||||
*/
|
||||
/*#define SD_DETECT_PIN PA15*/
|
||||
|
||||
/* HAL configuration */
|
||||
#define HSE_VALUE 25000000U
|
||||
|
||||
/* Extra HAL modules */
|
||||
#define HAL_SD_MODULE_ENABLED
|
||||
|
||||
#endif
|
||||
|
||||
#ifdef __cplusplus
|
||||
} // extern "C"
|
||||
#endif
|
||||
/*----------------------------------------------------------------------------
|
||||
* Arduino objects - C++ only
|
||||
*----------------------------------------------------------------------------*/
|
||||
|
||||
#ifdef __cplusplus
|
||||
// These serial port names are intended to allow libraries and architecture-neutral
|
||||
// sketches to automatically default to the correct port name for a particular type
|
||||
// of use. For example, a GPS module would normally connect to SERIAL_PORT_HARDWARE_OPEN,
|
||||
// the first hardware serial port whose RX/TX pins are not dedicated to another use.
|
||||
//
|
||||
// SERIAL_PORT_MONITOR Port which normally prints to the Arduino Serial Monitor
|
||||
//
|
||||
// SERIAL_PORT_USBVIRTUAL Port which is USB virtual serial
|
||||
//
|
||||
// SERIAL_PORT_LINUXBRIDGE Port which connects to a Linux system via Bridge library
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE Hardware serial port, physical RX & TX pins.
|
||||
//
|
||||
// SERIAL_PORT_HARDWARE_OPEN Hardware serial ports which are open for use. Their RX & TX
|
||||
// pins are NOT connected to anything by default.
|
||||
#define SERIAL_PORT_MONITOR Serial
|
||||
#define SERIAL_PORT_HARDWARE Serial1
|
||||
#endif
|
||||
|
||||
#endif // _VARIANT_ARDUINO_STM32_
|
||||
|
||||
// PA0 54 // E1_THERMISTOR
|
||||
// PA1 55 // E2_THERMISTOR
|
||||
// PA2 56 // E3_THERMISTOR
|
||||
// PA3 53 // BED_THERMISTOR_3
|
||||
// PA4 16 // SPI_CS
|
||||
// PA5 17 // SPI_SCK
|
||||
// PA6 18 // SPI_MISO
|
||||
// PA7 19 // SPI_MOSI
|
||||
// PA8 43 // V_STOP
|
||||
// PA9 0 //TX
|
||||
// PA10 1 //RX
|
||||
// PA11 30 //OTG_DM
|
||||
// PA12 31 //OTG_DP
|
||||
// PA13 20 // JTAG_TMS/SWDIO
|
||||
// PA14 21 // JTAG_TCK/SWCLK
|
||||
// PA15 25 // SD_CARD_DETECT
|
||||
// PB0 49 // E2_HEAT_PWM
|
||||
// PB1 50 // E3_HEAT_PWM
|
||||
// PB3 22 // JTAG_TDO/SWO
|
||||
// PB4 37 // USER4
|
||||
// PB5 6 // WIFI_WAKEUP
|
||||
// PB6 15 // SCL
|
||||
// PB7 14 // SDA
|
||||
// PB8 77 // E3_PWM
|
||||
// PB9 35 // USER1
|
||||
// PB10 64 // Y_PWM
|
||||
// PB12 10 // SPI_CS
|
||||
// PB13 13 // SPI_SCK
|
||||
// PB14 12 // SPI_MISO
|
||||
// PB15 11 // SPI_MOSI
|
||||
// PC0 68 // Z_DIR
|
||||
// PC1 33 //IR_ON
|
||||
// PC2 51 // BED_THERMISTOR_1
|
||||
// PC3 52 // BED_THERMISTOR_2
|
||||
// PC4 57 // E1_FAN
|
||||
// PC5 58 // E2_FAN
|
||||
// PC6 67 // Z_PWM
|
||||
// PC7 48 // E1_HEAT_PWM
|
||||
// PC8 23 // SDIO_D0
|
||||
// PC9 24 // SDIO_D1
|
||||
// PC10 26 // SDIO_D2
|
||||
// PC11 27 // SDIO_D3
|
||||
// PC12 28 // SDIO_CK
|
||||
// PC13 70 // E1_DIR
|
||||
// PC14 69 // E1_RESET
|
||||
// PC15 66 // Z_RESET
|
||||
// PD0 44 // W_STOP
|
||||
// PD1 32 //IR_OUT
|
||||
// PD2 29 // SDIO_CMD
|
||||
// PD3 2 // CTS
|
||||
// PD4 3 // RTS
|
||||
// PD5 4 // TX
|
||||
// PD6 5 // RX
|
||||
// PD7 34 // USER3
|
||||
// PD8 39 // X_STOP
|
||||
// PD9 40 // Y_STOP
|
||||
// PD10 41 // Z_STOP
|
||||
// PD11 42 // U_STOP
|
||||
// PD12 71 // E1_PWM
|
||||
// PD13 45 // BED_HEAT_2
|
||||
// PD14 46 // BED_HEAT_1
|
||||
// PD15 47 // BED_HEAT_3
|
||||
// PE0 36 // USER2
|
||||
// PE1 9 // STATUS_LED
|
||||
// PE2 76 // E3_DIR
|
||||
// PE3 75 // E3_RESET
|
||||
// PE4 72 // E2_RESET
|
||||
// PE5 73 // E2_PWM
|
||||
// PE6 74 // E2_DIR
|
||||
// PE7 38 // USER_BUTTON
|
||||
// PE8 59 // E3_FAN
|
||||
// PE9 65 // Y_DIR
|
||||
// PE10 63 // Y_RESET
|
||||
// PE11 7 // WIFI_RESET
|
||||
// PE12 8 // WIFI_BOOT
|
||||
// PE13 60 // X_RESET
|
||||
// PE14 61 // X_PWM
|
||||
// PE15 62 // X_DIR
|
||||
@@ -142,8 +142,9 @@ def get_answer(board_name, cpu_label_txt, cpu_a_txt, cpu_b_txt):
|
||||
|
||||
root_get_answer = tk.Tk()
|
||||
root_get_answer.title('')
|
||||
root_get_answer.withdraw()
|
||||
root_get_answer.deiconify()
|
||||
#root_get_answer.withdraw()
|
||||
#root_get_answer.deiconify()
|
||||
root_get_answer.attributes("-topmost", True)
|
||||
|
||||
def disable_event():
|
||||
pass
|
||||
|
||||
@@ -1,14 +1,14 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# mffp [1|2] [commit-id]
|
||||
# mffp [1|2|3] [commit-id]
|
||||
#
|
||||
# Push the given commit (or HEAD) upstream immediately.
|
||||
# By default: `git push upstream HEAD:bugfix-1.1.x`
|
||||
#
|
||||
|
||||
[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { echo "usage: `basename $0` [1|2] [commit-id]" 1>&2 ; exit 1; }
|
||||
[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { echo "usage: `basename $0` [1|2|3] [commit-id]" 1>&2 ; exit 1; }
|
||||
|
||||
if [[ $1 == '1' || $1 == '2' ]]; then
|
||||
if [[ $1 == '1' || $1 == '2' || $1 == '3' ]]; then
|
||||
MFINFO=$(mfinfo "$1") || exit 1
|
||||
REF=${2:-HEAD}
|
||||
else
|
||||
|
||||
@@ -7,7 +7,7 @@
|
||||
# - Remote (upstream) Org name (MarlinFirmware)
|
||||
# - Remote (origin) Org name (your Github username)
|
||||
# - Repo Name (Marlin, MarlinDocumentation)
|
||||
# - PR Target branch (bugfix-1.1.x, bugfix-2.0.x, etc.)
|
||||
# - PR Target branch (bugfix-1.1.x, bugfix-2.0.x, dev-2.1.x, etc.)
|
||||
# - Branch Arg (the branch argument or current branch)
|
||||
# - Current Branch
|
||||
#
|
||||
@@ -42,19 +42,19 @@ while [[ $# -gt 0 ]]; do
|
||||
|
||||
case "$opt" in
|
||||
-*|--*) MORE="$MORE$opt " ; [[ $EQUALS == 1 ]] && MORE="$MORE=$val" ;;
|
||||
1|2) INDEX=$opt ;;
|
||||
1|2|3) INDEX=$opt ;;
|
||||
*) BRANCH="$opt" ;;
|
||||
esac
|
||||
|
||||
done
|
||||
|
||||
case "$REPO" in
|
||||
Marlin ) TARG=bugfix-1.1.x ; [[ $INDEX == 2 ]] && TARG=bugfix-2.0.x ;;
|
||||
Marlin ) TARG=bugfix-1.1.x ; [[ $INDEX == 2 ]] && TARG=bugfix-2.0.x ; [[ $INDEX == 3 ]] && TARG=dev-2.1.x ;;
|
||||
MarlinDocumentation ) TARG=master ;;
|
||||
esac
|
||||
|
||||
[[ $BRANCH =~ ^[0-9]$ ]] && USAGE=1
|
||||
[[ $BRANCH =~ ^[123]$ ]] && USAGE=1
|
||||
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [1|2] [branch]" 1>&2 ; exit 1 ; }
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [1|2|3] [branch]" 1>&2 ; exit 1 ; }
|
||||
|
||||
echo "$ORG $FORK $REPO $TARG $BRANCH $CURR $MORE"
|
||||
|
||||
@@ -6,7 +6,7 @@
|
||||
#
|
||||
|
||||
usage() {
|
||||
echo "usage: `basename $0` [1|2] [name]" 1>&2
|
||||
echo "usage: `basename $0` [1|2|3] [name]" 1>&2
|
||||
}
|
||||
|
||||
[[ $# < 3 && $1 != "-h" && $1 != "--help" ]] || { usage; exit 1; }
|
||||
@@ -19,12 +19,12 @@ BRANCH=pr_for_$TARG-$(date +"%G-%m-%d_%H.%M.%S")
|
||||
# BRANCH can be given as the last argument
|
||||
case "$#" in
|
||||
1 ) case "$1" in
|
||||
1|2) ;;
|
||||
1|2|3) ;;
|
||||
*) BRANCH=$1 ;;
|
||||
esac
|
||||
;;
|
||||
2 ) case "$1" in
|
||||
1|2) BRANCH=$2 ;;
|
||||
1|2|3) BRANCH=$2 ;;
|
||||
*) usage ; exit 1 ;;
|
||||
esac
|
||||
;;
|
||||
|
||||
@@ -1,11 +1,11 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# mfpr [1|2]
|
||||
# mfpr [1|2|3]
|
||||
#
|
||||
# Make a PR against bugfix-1.1.x or bugfix-2.0.x
|
||||
#
|
||||
|
||||
[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "usage: `basename $0` [branch]" 1>&2 ; exit 1; }
|
||||
[[ $# < 2 && $1 != "-h" && $1 != "--help" ]] || { echo "usage: `basename $0` [1|2|3] [branch]" 1>&2 ; exit 1; }
|
||||
|
||||
MFINFO=$(mfinfo "$@") || exit 1
|
||||
IFS=' ' read -a INFO <<< "$MFINFO"
|
||||
|
||||
@@ -99,15 +99,15 @@ fi
|
||||
echo
|
||||
echo "Generating MarlinDocumentation..."
|
||||
|
||||
rm -rf _site
|
||||
rm -rf build
|
||||
|
||||
# build the site statically and proof it
|
||||
bundle exec jekyll build --profile --trace --no-watch
|
||||
bundle exec htmlproofer ./_site --only-4xx --allow-hash-href --check-favicon --check-html --url-swap ".*marlinfw.org/:/"
|
||||
bundle exec htmlproofer ./build --only-4xx --allow-hash-href --check-favicon --check-html --url-swap ".*marlinfw.org/:/"
|
||||
|
||||
# Sync the built site into a temporary folder
|
||||
TMPFOLDER=$( mktemp -d )
|
||||
rsync -av _site/ ${TMPFOLDER}/
|
||||
rsync -av build/ ${TMPFOLDER}/
|
||||
|
||||
# Clean out changes and other junk in the branch
|
||||
git reset --hard
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# mfqp [-q|--quick] [1|2]
|
||||
# mfqp [-q|--quick] [1|2|3]
|
||||
#
|
||||
# Add all changed files, commit as "patch", do `mfrb` and `git push -f`
|
||||
#
|
||||
@@ -24,7 +24,7 @@ done
|
||||
|
||||
[[ ${INFO[4]} =~ [0-9] ]] && USAGE=1
|
||||
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [-hq] [1|2]" 1>&2 ; exit 1 ; }
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [-hq] [1|2|3]" 1>&2 ; exit 1 ; }
|
||||
|
||||
git add .
|
||||
git commit -m "patch"
|
||||
|
||||
@@ -2,7 +2,7 @@
|
||||
#
|
||||
# mfrb
|
||||
#
|
||||
# Do "git rebase -i" against the "target" branch (bugfix-1.1.x, bugfix-2.0.x, or master)
|
||||
# Do "git rebase -i" against the "target" branch (bugfix-1.1.x, bugfix-2.0.x, dev-2.1.x, or master)
|
||||
#
|
||||
|
||||
MFINFO=$(mfinfo "$@") || exit 1
|
||||
@@ -21,7 +21,7 @@ while [ $IND -lt ${#INFO[@]} ]; do
|
||||
let IND+=1
|
||||
done
|
||||
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [1|2]" 1>&2 ; exit 1 ; }
|
||||
[[ $USAGE == 1 ]] && { echo "usage: `basename $0` [1|2|3]" 1>&2 ; exit 1 ; }
|
||||
|
||||
# If the branch isn't currently the PR target
|
||||
if [[ $TARG != $CURR ]]; then
|
||||
|
||||
@@ -22,7 +22,7 @@ timer_freq = cpu_freq / args.divider
|
||||
print("#ifndef SPEED_LOOKUPTABLE_H")
|
||||
print("#define SPEED_LOOKUPTABLE_H")
|
||||
print()
|
||||
print('#include "Marlin.h"')
|
||||
print('#include "MarlinCore.h"')
|
||||
print()
|
||||
|
||||
print("const uint16_t speed_lookuptable_fast[256][2] PROGMEM = {")
|
||||
|
||||
@@ -29,8 +29,8 @@ fi
|
||||
|
||||
echo -n "Building list of missing strings..."
|
||||
|
||||
for i in $(awk '/#ifndef/{print $2}' language_en.h); do
|
||||
[[ $i == "LANGUAGE_EN_H" || $i == "CHARSIZE" ]] && continue
|
||||
for i in $(awk '/Language_Str/{print $3}' language_en.h); do
|
||||
[[ $i == "MSG_CUBED" ]] && continue
|
||||
LANG_LIST=""
|
||||
for j in $TEST_LANGS; do
|
||||
[[ $(grep -c " ${i} " language_${j}.h) -eq 0 ]] && LANG_LIST="$LANG_LIST $j"
|
||||
|
||||
@@ -15,7 +15,7 @@ set -e
|
||||
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMPS_14_RE_ARM_EFB
|
||||
opt_enable VIKI2 SDSUPPORT SERIAL_PORT2 NEOPIXEL_LED BAUD_RATE_GCODE
|
||||
opt_enable VIKI2 SDSUPPORT SERIAL_PORT_2 NEOPIXEL_LED
|
||||
opt_set NEOPIXEL_PIN P1_16
|
||||
exec_test $1 $2 "ReARM EFB VIKI2, SDSUPPORT, 2 Serial ports (USB CDC + UART0), NeoPixel"
|
||||
|
||||
@@ -39,13 +39,14 @@ opt_set TEMP_SENSOR_1 -1
|
||||
opt_set TEMP_SENSOR_BED 5
|
||||
opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
|
||||
FILAMENT_WIDTH_SENSOR FILAMENT_LCD_DISPLAY PID_EXTRUSION_SCALING \
|
||||
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Re-ARM with Many Features"
|
||||
opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
|
||||
exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features."
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -21,7 +21,7 @@ opt_enable VIKI2 SDSUPPORT ADAPTIVE_FAN_SLOWING NO_FAN_SLOWING_IN_PID_TUNING \
|
||||
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
|
||||
BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
|
||||
PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
|
||||
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE BAUD_RATE_GCODE \
|
||||
Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
|
||||
LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA
|
||||
opt_set GRID_MAX_POINTS_X 16
|
||||
exec_test $1 $2 "Smoothieboard with many features"
|
||||
@@ -33,8 +33,8 @@ exec_test $1 $2 "Smoothieboard with many features"
|
||||
# AUTO_BED_LEVELING_UBL RESTORE_LEVELING_AFTER_G28 EEPROM_SETTINGS \
|
||||
# FILAMENT_LCD_DISPLAY FILAMENT_WIDTH_SENSOR FAN_SOFT_PWM \
|
||||
# SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER FAN_KICKSTART_TIME \
|
||||
# SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS BAUD_RATE_GCODE \
|
||||
# VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL \
|
||||
# SD_ABORT_ON_ENDSTOP_HIT ADVANCED_OK GCODE_MACROS \
|
||||
# VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS \
|
||||
# EXTRA_FAN_SPEED FWRETRACT MENU_ADDAUTOSTART SDCARD_SORT_ALPHA
|
||||
#opt_set FAN_MIN_PWM 50
|
||||
#opt_set FAN_KICKSTART_TIME 100
|
||||
@@ -47,7 +47,7 @@ opt_set MOTHERBOARD BOARD_COHESION3D_REMIX
|
||||
opt_set X_DRIVER_TYPE TMC2130
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT BAUD_RATE_GCODE \
|
||||
opt_enable AUTO_BED_LEVELING_BILINEAR EEPROM_SETTINGS EEPROM_CHITCHAT \
|
||||
TMC_USE_SW_SPI MONITOR_DRIVER_STATUS STEALTHCHOP_XY STEALTHCHOP_Z HYBRID_THRESHOLD \
|
||||
SENSORLESS_PROBING X_STALL_SENSITIVITY Y_STALL_SENSITIVITY Z_STALL_SENSITIVITY TMC_DEBUG
|
||||
opt_disable Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN PSU_CONTROL
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RC Bigtreetech (SKR Mini E3)
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini E3)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
@@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V1_0
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "Bigtreetech SKR Mini E3 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini E3 - Basic Configuration"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RC Bigtreetech (SKR Mini v1.1)
|
||||
# Build tests for STM32F103RC BigTreeTech (SKR Mini v1.1)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
@@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_MINI_V1_1
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "Bigtreetech SKR Mini v1.1 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - Basic Configuration"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RE Bigtreetech (SKR E3 DIP v1.0)
|
||||
# Build tests for STM32F103RE BigTreeTech (SKR E3 DIP v1.0)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
@@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_E3_DIP
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "Bigtreetech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -1,6 +1,6 @@
|
||||
#!/usr/bin/env bash
|
||||
#
|
||||
# Build tests for STM32F103RE Bigtreetech (SKR E3 DIP v1.0)
|
||||
# Build tests for STM32F103RE BigTreeTech (SKR E3 DIP v1.0)
|
||||
#
|
||||
|
||||
# exit on first failure
|
||||
@@ -13,7 +13,7 @@ restore_configs
|
||||
opt_set MOTHERBOARD BOARD_BIGTREE_SKR_E3_DIP
|
||||
opt_set SERIAL_PORT 1
|
||||
opt_set SERIAL_PORT_2 -1
|
||||
exec_test $1 $2 "Bigtreetech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
exec_test $1 $2 "BigTreeTech SKR E3 DIP v1.0 - Basic Configuration"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -12,8 +12,8 @@ set -e
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_ESPRESSIF_ESP32
|
||||
opt_enable WIFISUPPORT GCODE_MACROS BAUD_RATE_GCODE
|
||||
opt_set "WIFI_SSID \"ssid\""
|
||||
opt_set "WIFI_PWD \"password\""
|
||||
opt_set WIFI_SSID "\"ssid\""
|
||||
opt_set WIFI_PWD "\"password\""
|
||||
opt_set TX_BUFFER_SIZE 64
|
||||
opt_add WEBSUPPORT
|
||||
exec_test $1 $2 "ESP32 with WIFISUPPORT and WEBSUPPORT"
|
||||
|
||||
@@ -117,11 +117,13 @@ opt_set LCD_LANGUAGE de
|
||||
opt_enable EEPROM_SETTINGS EEPROM_CHITCHAT \
|
||||
ULTIMAKERCONTROLLER SDSUPPORT PCA9632 LCD_INFO_MENU \
|
||||
AUTO_BED_LEVELING_BILINEAR PROBE_MANUALLY LCD_BED_LEVELING G26_MESH_VALIDATION MESH_EDIT_MENU \
|
||||
M100_FREE_MEMORY_WATCHER M100_FREE_MEMORY_DUMPER M100_FREE_MEMORY_CORRUPTOR \
|
||||
M100_FREE_MEMORY_WATCHER \
|
||||
INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT EXPERIMENTAL_I2CBUS \
|
||||
NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE \
|
||||
ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE ADVANCED_PAUSE_CONTINUOUS_PURGE FILAMENT_LOAD_UNLOAD_GCODES \
|
||||
PRINTCOUNTER SERVICE_NAME_1 SERVICE_INTERVAL_1 M114_DETAIL
|
||||
opt_add M100_FREE_MEMORY_DUMPER
|
||||
opt_add M100_FREE_MEMORY_CORRUPTOR
|
||||
opt_set PWM_MOTOR_CURRENT "{ 1300, 1300, 1250 }"
|
||||
opt_set I2C_SLAVE_ADDRESS 63
|
||||
exec_test $1 $2 "MINIRAMBO | Ultimaker LCD | M100 | PWM_MOTOR_CURRENT | PRINTCOUNTER | Advanced Pause ..."
|
||||
@@ -179,7 +181,7 @@ opt_enable COREYX USE_XMAX_PLUG MIXING_EXTRUDER GRADIENT_MIX \
|
||||
FIX_MOUNTED_PROBE AUTO_BED_LEVELING_LINEAR DEBUG_LEVELING_FEATURE FILAMENT_WIDTH_SENSOR \
|
||||
SHOW_TEMP_ADC_VALUES HOME_Y_BEFORE_X EMERGENCY_PARSER \
|
||||
SD_ABORT_ON_ENDSTOP_HIT HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT ADVANCED_OK M114_DETAIL \
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS ACTION_ON_KILL EXTRA_FAN_SPEED FWRETRACT
|
||||
VOLUMETRIC_DEFAULT_ON NO_WORKSPACE_OFFSETS EXTRA_FAN_SPEED FWRETRACT
|
||||
opt_set FAN_MIN_PWM 50
|
||||
opt_set FAN_KICKSTART_TIME 100
|
||||
opt_set XY_FREQUENCY_LIMIT 15
|
||||
@@ -295,7 +297,7 @@ exec_test $1 $2 "Full-featured CR-10S config"
|
||||
# Delta Config (generic) + ABL bilinear + BLTOUCH
|
||||
use_example_configs delta/generic
|
||||
opt_set LCD_LANGUAGE cz
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH BLTOUCH_FORCE_5V_MODE
|
||||
opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER DELTA_CALIBRATION_MENU AUTO_BED_LEVELING_BILINEAR BLTOUCH
|
||||
exec_test $1 $2 "RAMPS | DELTA | RRD LCD | ABL Bilinear | BLTOUCH"
|
||||
|
||||
#
|
||||
@@ -320,7 +322,7 @@ exec_test $1 $2 "RAMPS 1.3 | DELTA | FLSUN AC Config"
|
||||
#exec_test $1 $2 "Stuff"
|
||||
|
||||
#
|
||||
# SCARA with TMC2130
|
||||
# SCARA with Mixed TMC
|
||||
#
|
||||
use_example_configs SCARA/Morgan
|
||||
opt_set LCD_LANGUAGE es
|
||||
@@ -330,7 +332,7 @@ opt_enable USE_ZMIN_PLUG FIX_MOUNTED_PROBE AUTO_BED_LEVELING_BILINEAR PAUSE_BEFO
|
||||
opt_set X_MAX_ENDSTOP_INVERTING false
|
||||
opt_set X_DRIVER_TYPE TMC2209
|
||||
opt_set Y_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_set Z_DRIVER_TYPE TMC2130_STANDALONE
|
||||
opt_set E0_DRIVER_TYPE TMC2660
|
||||
exec_test $1 $2 "RAMPS | SCARA | Mixed TMC | EEPROM"
|
||||
|
||||
@@ -341,7 +343,7 @@ restore_configs
|
||||
opt_set LCD_LANGUAGE vi
|
||||
opt_set X_DRIVER_TYPE TMC2160
|
||||
opt_set Y_DRIVER_TYPE TMC5160
|
||||
opt_set Z_DRIVER_TYPE TMC2208
|
||||
opt_set Z_DRIVER_TYPE TMC2208_STANDALONE
|
||||
opt_set E0_DRIVER_TYPE TMC2130
|
||||
opt_set X_MIN_ENDSTOP_INVERTING true
|
||||
opt_set Y_MIN_ENDSTOP_INVERTING true
|
||||
|
||||
@@ -17,5 +17,21 @@ opt_set Z_DRIVER_TYPE TMC2130
|
||||
opt_set E0_DRIVER_TYPE TMC2130
|
||||
exec_test $1 $2 "Default Configuration"
|
||||
|
||||
#
|
||||
# Full size Rambo Dual Endstop CNC
|
||||
#
|
||||
restore_configs
|
||||
opt_set MOTHERBOARD BOARD_RAMBO
|
||||
opt_set EXTRUDERS 0
|
||||
opt_set TEMP_SENSOR_0 999
|
||||
opt_set DUMMY_THERMISTOR_999_VALUE 170
|
||||
opt_set DIGIPOT_MOTOR_CURRENT '{ 120, 120, 120, 120, 120 }'
|
||||
opt_enable USE_XMAX_PLUG USE_YMAX_PLUG USE_ZMAX_PLUG \
|
||||
REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER REVERSE_ENCODER_DIRECTION SDSUPPORT EEPROM_SETTINGS \
|
||||
S_CURVE_ACCELERATION X_DUAL_STEPPER_DRIVERS X_DUAL_ENDSTOPS Y_DUAL_STEPPER_DRIVERS Y_DUAL_ENDSTOPS \
|
||||
ADAPTIVE_STEP_SMOOTHING CNC_COORDINATE_SYSTEMS GCODE_MOTION_MODES
|
||||
opt_disable MIN_SOFTWARE_ENDSTOP_Z MAX_SOFTWARE_ENDSTOPS
|
||||
exec_test $1 $2 "Rambo CNC Configuration"
|
||||
|
||||
# clean up
|
||||
restore_configs
|
||||
|
||||
@@ -1,2 +0,0 @@
|
||||
out
|
||||
node_modules
|
||||
@@ -1,9 +0,0 @@
|
||||
.vscode/**
|
||||
.vscode-test/**
|
||||
out/test/**
|
||||
test/**
|
||||
src/**
|
||||
**/*.map
|
||||
.gitignore
|
||||
tsconfig.json
|
||||
vsc-extension-quickstart.md
|
||||
@@ -1,40 +0,0 @@
|
||||
# Auto Build Marlin
|
||||
|
||||
"AutoBuildMarlin" is a *Visual Studio Code* extension that provides a one-button interface to build and upload Marlin Firmware to your selected `MOTHERBOARD`, removing the need to edit your `platformio.ini` file or scroll through a long list of Marlin environments.
|
||||
|
||||
## Get PlatformIO
|
||||
|
||||
Before you install AutoBuildMarlin you'll first need to [Install PlatformIO in VSCode](http://marlinfw.org/docs/basics/install_platformio_vscode.html). Once you have followed these instructions, continue below.
|
||||
|
||||
## Installing This Extension
|
||||
|
||||
- [Download Marlin Firmware](http://marlinfw.org/meta/download/) and unzip it to your documents folder.
|
||||
- Open the directory `buildroot/share/vscode` and copy the "`AutoBuildMarlin`" folder to **the *Visual Studio Code* `extensions` directory**.
|
||||
- Relaunch *Visual Studio Code* to complete the installation.
|
||||
|
||||
### To find your `extensions` directory:
|
||||
|
||||
- **Windows** - Use Windows Explorer's address bar to open `C:/Users/USERNAME/.vscode/extensions`.
|
||||
- **Mac** - Use the Finder's `Go` menu to open `~/.vscode/extensions`.
|
||||
- **Linux** - In the Terminal type `open ~/.vscode/extensions`.
|
||||
|
||||
## Usage
|
||||
|
||||
- Open up the downloaded *Marlin Firmware* project folder (***NOT the "Marlin" folder within***) in *Visual Studio Code*. (You may also use the **Import Project…** option from the "PlaformIO Home" page.)
|
||||
|
||||
- With Marlin open, the "File Explorer" should be firmly rooted in your Marlin Firmware folder:
|
||||
|
||||
|
||||
|
||||
- Click the **Marlin Auto Build** icon  in the Activities Bar (on the left side of *Visual Studio Code* window) to bring up the **Marlin Auto Build** options bar.
|
||||
|
||||
|
||||
|
||||
- Click one of the four icons
|
||||
|
||||
Icon|Action
|
||||
----|------
|
||||
|Start **Marlin Build** to test your Marlin build
|
||||
|Start **Marlin Upload** to install Marlin on your board
|
||||
|Start **Marlin Upload (traceback)** to install Marlin with debugging
|
||||
|Start **Marlin Clean** to delete old build files
|
||||
@@ -1,44 +0,0 @@
|
||||
'use strict';
|
||||
|
||||
var vscode = require('vscode');
|
||||
|
||||
function activate(context) {
|
||||
|
||||
console.log('Extension "AutoBuildMarlin" is now active!');
|
||||
|
||||
var NEXT_TERM_ID = 1;
|
||||
var mf_build = vscode.commands.registerCommand('mfbuild', function () {
|
||||
vscode.commands.executeCommand('workbench.action.files.saveAll');
|
||||
const terminal = vscode.window.createTerminal(`Marlin Build #${NEXT_TERM_ID++}`);
|
||||
terminal.show(true);
|
||||
terminal.sendText("python buildroot/share/atom/auto_build.py build");
|
||||
});
|
||||
var mf_upload = vscode.commands.registerCommand('mfupload', function () {
|
||||
vscode.commands.executeCommand('workbench.action.files.saveAll');
|
||||
const terminal = vscode.window.createTerminal(`Marlin Upload #${NEXT_TERM_ID++}`);
|
||||
terminal.show(true);
|
||||
terminal.sendText("python buildroot/share/atom/auto_build.py upload");
|
||||
});
|
||||
var mf_traceback = vscode.commands.registerCommand('mftraceback', function () {
|
||||
vscode.commands.executeCommand('workbench.action.files.saveAll');
|
||||
const terminal = vscode.window.createTerminal(`Marlin Traceback #${NEXT_TERM_ID++}`);
|
||||
terminal.show(true);
|
||||
terminal.sendText("python buildroot/share/atom/auto_build.py traceback");
|
||||
});
|
||||
var mf_clean = vscode.commands.registerCommand('mfclean', function () {
|
||||
const terminal = vscode.window.createTerminal(`Marlin Clean #${NEXT_TERM_ID++}`);
|
||||
terminal.show(true);
|
||||
terminal.sendText("python buildroot/share/atom/auto_build.py clean");
|
||||
});
|
||||
|
||||
context.subscriptions.push(mf_build);
|
||||
context.subscriptions.push(mf_upload);
|
||||
context.subscriptions.push(mf_traceback);
|
||||
context.subscriptions.push(mf_clean);
|
||||
}
|
||||
exports.activate = activate;
|
||||
|
||||
// this method is called when your extension is deactivated
|
||||
function deactivate() {
|
||||
}
|
||||
exports.deactivate = deactivate;
|
||||
Binary file not shown.
|
Before Width: | Height: | Size: 4.5 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 20 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 35 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 4.6 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 4.6 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 4.9 KiB |
Binary file not shown.
|
Before Width: | Height: | Size: 4.2 KiB |
@@ -1,111 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Generator: Adobe Illustrator 16.0.0, SVG Export Plug-In . SVG Version: 6.00 Build 0) -->
|
||||
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
xmlns:sodipodi="http://sodipodi.sourceforge.net/DTD/sodipodi-0.dtd"
|
||||
xmlns:inkscape="http://www.inkscape.org/namespaces/inkscape"
|
||||
version="1.1"
|
||||
id="Layer_1"
|
||||
x="0px"
|
||||
y="0px"
|
||||
width="210mm"
|
||||
height="297mm"
|
||||
viewBox="0 0 744.09448 1052.3622"
|
||||
enable-background="new 0 0 732.76 821.023"
|
||||
xml:space="preserve"
|
||||
inkscape:version="0.91 r13725"
|
||||
sodipodi:docname="marlin.svg"
|
||||
inkscape:export-filename="C:\Users\jbrazio\Desktop\marlin.png"
|
||||
inkscape:export-xdpi="27.424898"
|
||||
inkscape:export-ydpi="27.424898"><title
|
||||
id="title3357">Marlin Firmware </title><metadata
|
||||
id="metadata55"><rdf:RDF><cc:Work
|
||||
rdf:about=""><dc:format>image/svg+xml</dc:format><dc:type
|
||||
rdf:resource="http://purl.org/dc/dcmitype/StillImage" /><dc:title>Marlin Firmware </dc:title><dc:creator><cc:Agent><dc:title>Ahmet Cem TURAN</dc:title></cc:Agent></dc:creator><dc:publisher><cc:Agent><dc:title>João Brázio</dc:title></cc:Agent></dc:publisher><dc:rights><cc:Agent><dc:title>MarlinFirmware</dc:title></cc:Agent></dc:rights><dc:identifier>marlin-logo-new</dc:identifier></cc:Work></rdf:RDF></metadata><defs
|
||||
id="defs53" />
|
||||
<rect rx="40" x="0" y="154" width="744" height="744" style="fill: #EEEEFF; stroke: white; opacity:0.5"/>
|
||||
<g id="g3383"
|
||||
transform="matrix(1.0758487,0,0,-1.0758487,5.9413219,1144.5066)"><g
|
||||
id="g3"
|
||||
transform="matrix(0.9288179,0,0,-0.9288179,-0.00839045,956.02381)"><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path5"
|
||||
d="m 484.324,3.644 c -11.78,8.81 -20.69,19.069 -29.891,34.38 -13.85,23.04 -20.51,39.79 -23.54,59.16 -2.22,14.22 -2.939,34.95 -1.59,45.84 0.8,6.5 0.8,6.5 23.5,6.59 25.48,0.11 33.09,1.03 48.19,5.85 33.22,10.61 50.779,19.66 68.77,35.44 4.25,3.73 9.03,7.87 10.61,9.2 4.56,3.83 18.27,20.479 23.3,28.29 2.521,3.92 6.13,9.5 8.021,12.39 1.88,2.9 4.319,7.28 5.409,9.75 2.21,4.99 4.511,6.15 3.44,1.74 -0.9,-3.771 -8.6,-18.76 -14.6,-28.42 -2.721,-4.4 -4.95,-8.32 -4.95,-8.73 0,-0.41 -2.021,-3.359 -4.5,-6.55 -2.471,-3.18 -4.5,-6.34 -4.5,-7.02 0,-0.67 -2.04,-3.08 -4.54,-5.36 -2.5,-2.271 -5.21,-5.71 -6.021,-7.65 -0.81,-1.939 -1.939,-3.52 -2.529,-3.52 -1.7,0 -16.91,-15.62 -16.91,-17.37 0,-0.87 -1.24,-2.22 -2.75,-3 -1.511,-0.79 -4.21,-2.82 -5.99,-4.53 -1.78,-1.7 -3.87,-3.1 -4.63,-3.1 -0.76,0 -1.97,-0.7 -2.68,-1.561 -1.261,-1.52 0.75,-0.89 12.14,3.811 2.22,0.92 3.22,0.64 7,-1.96 2.43,-1.67 9.99,-5.83 16.82,-9.25 26.25,-13.15 53.329,-18.29 68.64,-13.021 7.91,2.721 8.8,2.051 2.59,-1.93 -10.96,-7.03 -29.7,-12.07 -39.11,-10.51 -9.13,1.5 -23.8,4.75 -29.01,6.41 -14.42,4.609 -38.72,18.189 -40.41,22.59 -0.89,2.31 -3.279,0.189 -4.13,-3.65 -0.35,-1.609 -1.04,-2.93 -1.52,-2.93 -2.24,0 -7.94,-6.38 -8.53,-9.54 -0.4,-2.09 -1.37,-3.62 -2.55,-4 -2.3,-0.73 -4.88,-5.42 -4.88,-8.88 0,-1.79 -0.87,-2.98 -2.971,-4.061 -3.43,-1.779 -5.029,-4.31 -5.029,-7.949 0,-1.971 -0.851,-2.96 -3.721,-4.311 -4.55,-2.149 -6.25,-5.27 -6.27,-11.51 -0.01,-3.3 -0.42,-4.75 -1.36,-4.75 -2.529,0 -5.02,-3.97 -5.09,-8.11 -0.04,-2.75 -0.609,-4.34 -1.81,-5.01 -2.63,-1.47 -5,-6.73 -4.3,-9.54 0.409,-1.63 -0.03,-3.26 -1.311,-4.89 -1.66,-2.11 -1.78,-3.021 -0.88,-6.58 0.96,-3.78 0.85,-4.28 -1.26,-5.87 -2.15,-1.62 -2.271,-2.25 -1.721,-8.8 0.46,-5.471 0.271,-7.33 -0.84,-8.25 -1.71,-1.42 -1.899,-7.23 -0.34,-10.141 0.84,-1.56 0.8,-2.26 -0.16,-2.85 -2.8,-1.73 -1.3,-7.8 4.09,-16.5 2.904,-4.698 0.704,-4.637 -5.696,0.163 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path7"
|
||||
d="m 593.494,151.913 c -27.23,11.9 -27.17,11.86 -21.75,13.91 11.35,4.28 11.56,4.28 16.51,0.34 7.01,-5.6 26.74,-22.42 26.74,-22.8 0,-0.759 -2.33,0.17 -21.5,8.55 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path9"
|
||||
d="m 430.115,153.243 c -2.301,0.61 -6.46,4.01 -13,10.61 -7.41,7.479 -11.69,10.859 -18.61,14.689 -13.109,7.261 -23.34,15.221 -29.3,22.811 -7.94,10.1 -28.14,30.55 -33,33.39 -2.37,1.391 -4.06,2.76 -3.77,3.061 1.02,1.01 14.09,-5.181 22.56,-10.681 12.22,-7.939 22.06,-12.14 41,-17.489 22.01,-6.211 24.47,-7.351 33.439,-15.49 9.061,-8.21 11.03,-8.641 39.061,-8.54 48.56,0.16 79.989,8.78 118.6,32.52 5.29,3.24 9.9,5.9 10.25,5.9 1.851,0 -0.16,-2.9 -8.1,-11.71 -12.36,-13.7 -12.07,-13.41 -19.25,-18.96 -26.48,-20.46 -55.641,-33.22 -86.431,-37.84 -21.619,-3.25 -45.96,-4.28 -53.449,-2.271 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path11"
|
||||
d="m 565.994,169.783 c 0,0.5 3.71,2.78 8.25,5.061 15.34,7.71 34.29,24.04 54.56,47.02 23.07,26.15 45.3,70.01 52.54,103.66 8.28,38.47 9.72,48.08 11.78,78.5 0.96,14.05 0.479,70.63 -0.66,78.5 -0.23,1.649 -0.86,7.27 -1.4,12.5 -0.8,7.819 -2.96,27.56 -4.409,40.279 -0.61,5.33 1.84,2.061 5.51,-7.359 3.34,-8.601 8.2,-29.86 13.22,-57.92 0.83,-4.681 2.19,-11.65 3.01,-15.5 5.23,-24.471 7.87,-68.561 5.67,-94.65 -3.04,-36.1 -8.819,-57.53 -22.31,-82.85 -23.54,-44.14 -53.6,-75.34 -92.76,-96.29 -11.34,-6.061 -33.001,-13.25 -33.001,-10.951 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path13"
|
||||
d="m 324.754,228.673 c -9.16,1.23 -12.33,2.19 -21.49,6.5 -22.39,10.54 -28.569,12.45 -54.739,16.94 -29.301,5.03 -56.101,7.71 -86.53,8.66 -19.67,0.62 -77.15,-1.351 -83.9,-2.87 -6.76,-1.51 -7.39,0.43 -1.17,3.59 13.07,6.62 20.16,7.73 83.57,13.07 9.9,0.84 18.68,1.71 19.5,1.939 0.83,0.24 7.13,0.681 14,0.99 22.22,1.01 61.86,4.89 71.5,7 34.56,7.58 43.47,10.48 64.31,20.93 5.94,2.98 15.04,8.16 20.221,11.51 5.17,3.351 9.989,6.091 10.689,6.091 1.74,0 1.61,-3.5 -0.29,-7.511 -2.56,-5.39 -11.96,-15.02 -19.029,-19.479 -17.591,-11.11 -37.101,-18.97 -64.24,-25.88 -8.431,-2.15 -14.96,-4.11 -14.5,-4.37 0.46,-0.25 4.5,-1.66 8.97,-3.12 10.04,-3.28 19.37,-8.39 28.15,-15.43 7.54,-6.05 19.779,-12.58 25.529,-13.63 5.631,-1.021 14.73,-4.71 14.11,-5.71 -0.651,-1.06 -1.171,-1.029 -14.661,0.78 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path15"
|
||||
d="m 421.244,246.264 c 4.71,21.72 5,24.26 4.45,38.26 -0.57,14.38 -1.73,19.409 -7.54,32.72 -4.46,10.21 -15.931,18.67 -30.44,22.46 -8.55,2.24 -25.97,2.22 -55.39,-0.04 -26.11,-2.01 -36.95,-1.5 -43.59,2.05 -3.24,1.73 -3.24,1.73 3.76,2.49 12.45,1.35 27.75,5.07 48.43,11.77 10.8,3.5 23.141,6.21 32.07,7.04 4.68,0.44 8.76,0.641 9.07,0.45 0.319,-0.18 3.239,-0.62 6.5,-0.96 11.949,-1.27 24.72,-8.109 36.43,-19.52 19.189,-18.69 23.85,-45.7 12.76,-73.96 -3.88,-9.891 -12.31,-23.23 -15.43,-24.43 -1.209,-0.46 -1.459,-0.08 -1.08,1.67 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path17"
|
||||
d="m 342.594,268.073 c -6.18,5.43 -6.96,13.45 -2.04,21.11 5.341,8.31 17.33,6.92 21.82,-2.54 3.37,-7.12 0.99,-14.431 -6.3,-19.351 -4.78,-3.209 -9.23,-2.959 -13.48,0.781 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path19"
|
||||
d="m 628.284,279.654 c 0.27,3.37 0.109,8.17 -0.351,10.68 -0.64,3.431 -0.479,5.3 0.66,7.58 0.83,1.66 1.65,5.41 1.83,8.32 0.18,2.91 1.07,6.72 1.99,8.47 0.91,1.75 1.91,5.58 2.21,8.5 0.31,2.93 1.189,6.74 1.96,8.47 0.78,1.73 1.41,5.46 1.41,8.29 0,3.01 0.66,6.13 1.59,7.561 0.88,1.34 1.84,5.26 2.14,8.71 0.3,3.46 1.33,7.87 2.29,9.79 0.96,1.92 3.01,8.56 4.561,14.75 1.55,6.189 3.18,11.25 3.62,11.25 2.979,0 -2.73,-54.45 -7.811,-74.5 -4.34,-17.141 -11.46,-37.04 -14.939,-41.75 -1.6,-2.171 -1.64,-2.022 -1.16,3.879 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path21"
|
||||
d="m 565.994,286.123 c 0,0.61 2.93,4.271 6.52,8.141 8.78,9.489 16.561,19.979 20.271,27.34 3.84,7.609 10.02,25.739 10.85,31.84 0.63,4.59 0.63,4.59 -3.56,3.109 -15.601,-5.51 -51.141,-8.55 -71.2,-6.1 -23.68,2.9 -27.91,3.68 -41.021,7.53 -3.729,1.1 -6.59,3.5 -5.159,4.33 0.439,0.25 9.579,0.8 20.3,1.22 30.16,1.189 30.27,1.189 35.02,1.939 15.29,2.391 36.601,7.181 43.24,9.73 7.41,2.84 16.74,7.53 16.74,8.41 0,0.22 -30.391,0.41 -67.53,0.41 -67.52,0 -67.52,0 -65.85,-3.25 0.93,-1.79 3.159,-5.2 4.979,-7.57 8.01,-10.521 6.7,-20.93 -3.28,-26.06 -3.229,-1.65 -15.8,-1.45 -17.239,0.279 -0.931,1.12 -0.53,1.86 1.989,3.65 2.971,2.109 3.131,2.54 2.7,7.35 -0.25,2.8 -1.899,9.71 -3.66,15.351 -3.199,10.25 -3.199,10.25 -9.72,10.25 -5.76,0 -6.46,-0.21 -5.97,-1.75 0.3,-0.96 1.46,-5.13 2.569,-9.25 1.11,-4.13 3.091,-11.391 4.391,-16.15 1.3,-4.759 2.08,-9.07 1.74,-9.59 -0.69,-1.04 -12.16,-1.54 -16.25,-0.69 -2.16,0.44 -3.351,2.09 -6.67,9.23 -2.221,4.79 -5.08,13.09 -6.351,18.45 -2.319,9.75 -2.319,9.75 -185.949,9.75 -111.271,0 -185.591,0.37 -188.62,0.949 -9,1.7 -23.08,9.601 -27.051,15.171 -0.699,0.979 -1.899,2.409 -2.67,3.17 -1.779,1.79 -5.56,8.819 -5.56,10.359 0,0.65 -0.41,1.33 -0.9,1.521 -2.13,0.779 -3.09,20.439 -3.09,63.33 0,42.89 0.96,62.55 3.09,63.33 0.49,0.189 0.9,1.029 0.9,1.89 0,1.7 3.33,7.43 6.479,11.17 5.66,6.71 13.311,12.17 21.761,15.52 5.26,2.091 5.26,2.091 216.26,2.36 211,0.271 211,0.271 205,3.72 -3.3,1.9 -8.101,5.15 -10.67,7.23 -2.58,2.08 -7.53,5.97 -11,8.65 -11.59,8.92 -33.36,32.439 -31.63,34.159 0.27,0.271 3.819,-2.229 7.899,-5.569 11.69,-9.58 35.11,-20.721 55.9,-26.601 17.84,-5.04 61.729,-9 88.979,-8.029 23.2,0.829 37.181,3.27 64.63,11.239 7.051,2.061 7.521,1.63 10.17,-9.069 1.921,-7.75 2.91,-12.681 7.261,-36 1.12,-6.051 2.279,-11.79 2.569,-12.75 0.681,-2.28 -0.68,-2.21 -6.67,0.37 -4.939,2.13 -4.939,2.13 -4.939,17.5 0,15.38 0,15.38 -20.25,15.289 -18.641,-0.079 -19.87,-0.189 -15.44,-1.409 16.22,-4.46 29.5,-16.811 33.99,-31.591 1.5,-4.92 1.7,-11.27 1.7,-53.069 0,-47.48 0,-47.48 3.47,-47.2 5.12,0.4 8.53,3 8.53,6.51 0,1.601 0.64,3.16 1.43,3.46 1.8,0.69 3.57,5.66 3.57,9.99 0,2.24 0.85,4.16 2.63,5.94 2.34,2.33 2.56,3.17 2.05,7.489 -0.47,4.021 -0.28,4.971 1.12,5.42 0.939,0.311 4.31,4.33 7.5,8.94 6.02,8.68 7.86,10.62 16.09,16.88 7.8,5.94 8.68,4.93 2.68,-3.06 -5.38,-7.16 -8.83,-14.79 -11.55,-25.59 -3.01,-11.95 -3.47,-15.921 -4.18,-35.87 -0.68,-18.99 0.09,-17.79 -9.76,-15.23 -7.9,2.061 -18.301,7.36 -21.2,10.811 -2.38,2.819 -2.38,2.819 -2.34,-12.5 0.029,-13.641 0.18,-15.051 1.42,-12.83 1.81,3.239 2.38,1.739 2.88,-7.5 1.17,-21.61 -8.39,-54.021 -22.13,-75 -11.45,-17.49 -25.54,-32.69 -36.94,-39.851 -4.728,-2.958 -5.268,-3.117 -5.268,-1.548 z M 409.671,394.947 c 0.64,1.94 0.574,5.107 0.574,11.916 0,7.165 -0.678,17.899 24.231,17.899 0.659,-31.659 -1.163,-30.738 41.147,-30.738 42.31,0 42.31,0 47.59,4.87 2.9,2.67 6.47,5.93 7.92,7.25 7.811,7.06 20.66,18.819 23.91,21.88 2.04,1.92 7.9,7.33 13.01,12 5.11,4.67 10.75,9.85 12.53,11.5 1.78,1.649 7.39,6.819 12.47,11.5 24.38,22.439 22.07,17.439 21.74,47.12 -0.3,26.38 -0.3,26.38 -3.05,31.97 -3.601,7.33 -9.66,13.2 -17.721,17.189 -6.529,3.221 -6.529,3.221 -280.529,3.221 -274,0 -274,0 -280.51,-3.08 -9.811,-4.65 -17.92,-13.84 -19.931,-22.561 -1.359,-5.85 -1.359,-110.87 0,-116.72 1,-4.38 4.601,-10.37 9.131,-15.23 3.22,-3.449 13.289,-8.899 18.289,-9.89 6.383,-1.269 368.768,-1.366 369.199,-0.096 z" /><path
|
||||
style="display:none"
|
||||
inkscape:connector-curvature="0"
|
||||
id="path23"
|
||||
d="m 79.994,425.043 c -6.2,0.83 -12.82,3.13 -18,6.24 -4.73,2.84 -12.08,10.729 -14.36,15.42 -1.02,2.1 -2.37,4.72 -3,5.82 -0.79,1.38 -1.239,14.939 -1.449,43.97 -0.29,39.04 -0.19,42.06 1.439,43.25 1.14,0.83 5.17,1.28 11.561,1.28 9.81,0 9.81,0 9.819,-38.75 0.021,-43.25 0.24,-44.92 6.61,-50.931 4.34,-4.09 12.88,-6.779 18.729,-5.89 6.37,0.97 11.71,4.5 15.11,10 3.04,4.91 3.04,4.91 3.32,45.24 0.29,40.33 0.29,40.33 11.75,40.33 11.47,0 11.47,0 11.47,-36.67 0,-43 0.5,-47.48 5.83,-52.61 3.63,-3.49 11.09,-6.72 15.52,-6.72 4.83,0 12.78,3.159 15.74,6.25 5.93,6.21 5.87,5.72 6.15,49.25 0.26,40 0.26,40 11.76,40 11.5,0 11.5,0 11.5,-42.5 0,-42.5 0,-42.5 -3.32,-49.24 -5.42,-11.01 -13.09,-17.65 -25.229,-21.86 -8.86,-3.06 -23.681,-2.979 -32.24,0.181 -3.41,1.26 -6.43,2.55 -6.71,2.859 -0.271,0.311 -2.07,1.65 -4,2.99 -1.92,1.33 -3.86,3.02 -4.3,3.75 -1.26,2.09 -3.59,1.56 -6.51,-1.49 -7.579,-7.919 -22.89,-12.098 -37.19,-10.169 z"
|
||||
display="none" /><path
|
||||
style="display:none"
|
||||
inkscape:connector-curvature="0"
|
||||
id="path25"
|
||||
d="m 464.014,425.053 c -6.38,1.49 -9.76,8.38 -8.85,18 0.33,3.471 0.33,3.471 12.08,3.75 11.75,0.28 11.75,0.28 11.75,-7.83 0,-7.619 -0.17,-8.279 -2.92,-11.029 -1.61,-1.601 -3.601,-2.92 -4.42,-2.92 -0.82,0 -2.101,-0.181 -2.83,-0.4 -0.73,-0.211 -2.9,-0.02 -4.81,0.429 z"
|
||||
display="none" /><path
|
||||
style="display:none"
|
||||
inkscape:connector-curvature="0"
|
||||
id="path27"
|
||||
d="m 234.994,457.404 c -3.021,1.18 -6.85,2.899 -8.5,3.819 -3.29,1.83 -12.28,10.28 -14.22,13.36 -5.44,8.64 -7.91,20.35 -6.271,29.73 1.17,6.699 4.021,14.699 5.24,14.71 0.41,0 0.75,0.56 0.75,1.25 0,1.51 9.49,11.75 10.88,11.75 0.54,0 1.57,0.56 2.3,1.25 4.99,4.72 20.5,8.199 33.82,7.59 7.5,-0.34 7.5,-0.34 7.5,-10.84 0,-10.5 0,-10.5 -11.5,-11.011 -10.23,-0.46 -11.94,-0.8 -15.5,-3.119 -5.11,-3.341 -6.8,-5.37 -8.84,-10.641 -2.07,-5.34 -2.03,-9.59 0.149,-14.76 2.45,-5.83 4.091,-7.79 9.69,-11.59 4.61,-3.11 5.59,-3.38 12.5,-3.33 6.31,0.04 8.13,0.45 11.5,2.63 4.59,2.96 7.4,6.01 10.02,10.89 1.58,2.96 1.921,6.74 2.41,27.431 0.57,24 0.57,24 33.271,24.26 32.71,0.27 32.71,0.27 33,-27.16 0.3,-27.42 0.3,-27.42 3.399,-31.26 1.74,-2.15 5.101,-4.67 7.63,-5.72 11.94,-4.98 24.771,2.96 24.771,15.329 0,4.051 0,4.051 11.44,4.051 6.289,0 11.699,-0.42 12.02,-0.94 1.11,-1.8 -1.58,-15.61 -4.01,-20.56 -2.53,-5.16 -8.601,-12.5 -10.33,-12.5 -0.54,0 -1.57,-0.58 -2.3,-1.29 -0.73,-0.7 -3.95,-2.28 -7.16,-3.5 -4.78,-1.811 -7.9,-2.21 -17.21,-2.21 -17.45,0 -25.69,3.72 -36.08,16.29 -0.62,0.75 -1.46,2.449 -1.87,3.79 -0.41,1.329 -1.25,3.05 -1.87,3.819 -0.72,0.9 -1.26,8.41 -1.49,20.75 -0.35,19.351 -0.35,19.351 -9.75,19.351 -9.39,0 -9.39,0 -9.39,-9.61 0,-10.02 -2.62,-27.39 -4.13,-27.39 -0.48,0 -0.87,-0.681 -0.87,-1.521 0,-4.109 -10.54,-15.67 -18.12,-19.85 -7.939,-4.391 -13.75,-5.63 -25.79,-5.51 -9.299,0.092 -12.678,0.541 -17.089,2.262 z"
|
||||
display="none" /><path
|
||||
style="display:none"
|
||||
inkscape:connector-curvature="0"
|
||||
id="path29"
|
||||
d="m 525.764,457.104 c -2.6,1.029 -6.43,2.939 -8.51,4.25 -4.58,2.899 -11.26,10.109 -11.26,12.17 0,0.83 -0.37,1.5 -0.82,1.5 -0.45,0 -1.57,2.399 -2.5,5.34 -1.31,4.16 -1.68,9.229 -1.68,23.03 0,17.699 0,17.699 -10.75,17.409 -10.75,-0.279 -10.75,-0.279 -11.011,-32.56 -0.27,-32.29 -0.27,-32.29 -11.5,-32 -11.239,0.28 -11.239,0.28 -11.5,42.54 -0.26,42.27 -0.26,42.27 34,42 34.261,-0.26 34.261,-0.26 34.761,-27.76 0.359,-19.86 0.859,-28.13 1.79,-29.761 0.71,-1.25 3.189,-3.489 5.5,-4.97 8.13,-5.22 20.939,-3.13 25.34,4.14 1.67,2.761 1.92,6.04 2.37,30.591 0.5,27.5 0.5,27.5 9.87,27.79 15.01,0.46 14.13,2.18 14.13,-27.73 0,-27.34 -0.91,-33.85 -5.82,-41.49 -3.86,-6 -7.84,-9.31 -15.78,-13.14 -6.97,-3.36 -7.35,-3.43 -19.5,-3.33 -9.59,0.08 -13.47,0.531 -17.13,1.981 z"
|
||||
display="none" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path31"
|
||||
d="m 291.834,301.894 c -31.39,15.779 -65.61,48.069 -73.51,69.369 -0.95,2.58 -1.44,4.99 -1.07,5.351 0.36,0.37 4.62,-3.05 9.45,-7.58 9.01,-8.45 29.87,-22.99 38.79,-27.04 2.75,-1.24 7.93,-3.59 11.5,-5.2 15.81,-7.16 35.55,-13.08 56.75,-17.02 6.19,-1.15 11.25,-2.471 11.25,-2.92 0,-1.87 -27.38,-0.83 -41.5,1.569 -19.89,3.38 -23.5,3.83 -23.49,2.91 0.01,-1.46 10.38,-11.8 17.26,-17.2 3.7,-2.91 6.48,-5.7 6.171,-6.199 -0.851,-1.38 -1.231,-1.25 -11.601,3.96 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path33"
|
||||
d="m 714.554,427.213 c -1.97,6.01 -4.8,28.311 -4.92,38.83 -0.14,12.521 -0.14,12.521 3.36,18.42 3.58,6.021 15.01,18.561 16.93,18.561 1.78,0 1.24,-1.33 -2.68,-6.58 -2.061,-2.771 -5.29,-8.261 -7.181,-12.21 -3.43,-7.17 -3.43,-7.17 -2.31,-14.94 1.88,-13.02 2.85,-18.21 3.5,-18.86 0.34,-0.35 2,0.351 3.68,1.551 1.83,1.3 3.061,1.689 3.061,0.979 0,-2.34 -5.181,-15.51 -8.13,-20.66 -3.3,-5.771 -4.66,-7.081 -5.31,-5.091 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path35"
|
||||
d="m 685.124,557.274 c -2.561,9.659 -3.08,13.8 -3.11,24.779 -0.02,12.341 3.33,34.88 6.98,46.971 1.08,3.569 2.88,10.55 4.01,15.5 1.13,4.949 2.92,12.37 4,16.5 2.88,11.109 6,30.409 5.94,36.85 -0.051,5.65 -0.051,5.65 -4.12,-2.35 -5.23,-10.271 -15.091,-25.28 -21.83,-33.24 -11.53,-13.59 -27.24,-23.95 -37.891,-24.98 -3.25,-0.31 -6.449,-1.279 -7.609,-2.29 -2.83,-2.489 -8.05,-4.989 -10.391,-4.989 -1.1,0 -3.55,-0.92 -5.449,-2.04 -2.28,-1.34 -6.641,-2.37 -12.811,-3.021 -5.14,-0.54 -10.42,-1.439 -11.729,-2 -2.811,-1.2 -3.511,-0.75 -2.721,1.73 0.95,3 5.33,7.13 12.051,11.37 3.909,2.47 6.779,5.09 7.51,6.869 0.81,1.961 2.13,3.061 4.149,3.461 1.78,0.359 5.601,3.17 9.63,7.109 3.681,3.59 7.48,6.521 8.45,6.521 2.65,0 9.73,3.029 14.811,6.34 7,4.56 20.069,18.439 24.64,26.17 6.08,10.29 13.92,26.89 23.36,49.49 8.43,20.18 17.1,51.35 19.26,69.25 0.65,5.359 1.42,9.75 1.72,9.75 0.58,0 1.15,-1.24 6.57,-14.46 9.29,-22.66 11.439,-32.16 12.11,-53.54 0.97,-31.2 -4.49,-62.19 -16.66,-94.5 -9.29,-24.681 -23.91,-70.03 -25.46,-79 -0.86,-4.95 -1.851,-12.94 -2.2,-17.75 -0.351,-4.811 -0.96,-8.75 -1.36,-8.75 -0.4,0 -1.23,1.909 -1.85,4.25 z" /></g><g
|
||||
transform="matrix(92.881793,0,0,92.881793,0.51490554,-87841.16)"
|
||||
id="g37"><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path39"
|
||||
d="m 4.097,951.447 c 0,-0.434 0.002,-0.516 0.012,-0.566 C 4.146,950.7 4.27,950.6 4.458,950.6 l 0.063,0 -0.002,0.111 -0.002,0.111 -0.041,0.003 c -0.046,0.004 -0.072,0.015 -0.097,0.041 -0.037,0.04 -0.036,0.032 -0.039,0.576 l -0.002,0.513 -0.12,0 -0.121,0 0,-0.508 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path41"
|
||||
d="m 0.736,951.882 c -0.123,-0.032 -0.231,-0.118 -0.283,-0.224 -0.05,-0.103 -0.05,-0.097 -0.05,-0.589 0,-0.42 0.001,-0.444 0.014,-0.456 0.012,-0.01 0.032,-0.013 0.121,-0.013 l 0.107,0 0,0.445 c 0,0.283 0.003,0.455 0.008,0.473 0.02,0.073 0.1,0.133 0.184,0.14 0.097,0.008 0.18,-0.039 0.218,-0.121 l 0.018,-0.04 0.002,-0.448 0.002,-0.448 0.121,0 0.121,0 0,0.438 c 0,0.478 0,0.483 0.044,0.543 0.03,0.041 0.09,0.072 0.149,0.077 0.094,0.008 0.173,-0.035 0.215,-0.114 l 0.021,-0.039 0.002,-0.452 0.002,-0.452 0.121,0 0.121,0 0,0.449 c 0,0.419 -10e-4,0.453 -0.015,0.506 -0.023,0.089 -0.055,0.146 -0.121,0.211 -0.09,0.089 -0.186,0.128 -0.32,0.128 -0.122,0 -0.212,-0.034 -0.296,-0.113 l -0.048,-0.045 -0.017,0.022 c -0.029,0.039 -0.12,0.097 -0.184,0.117 -0.048,0.015 -0.075,0.019 -0.137,0.018 -0.044,-10e-4 -0.097,-0.007 -0.12,-0.013 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path43"
|
||||
d="m 4.642,951.881 c -0.014,-0.007 -0.034,-0.025 -0.044,-0.039 -0.015,-0.023 -0.017,-0.035 -0.017,-0.115 l 0,-0.09 0.121,0 0.121,0 0,0.08 c 0,0.089 -0.008,0.116 -0.045,0.151 -0.03,0.028 -0.095,0.035 -0.136,0.013 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path45"
|
||||
d="m 2.386,951.544 c -0.083,-0.025 -0.133,-0.055 -0.197,-0.118 -0.067,-0.067 -0.112,-0.146 -0.132,-0.239 -0.019,-0.084 -0.012,-0.199 0.016,-0.275 0.042,-0.115 0.125,-0.211 0.227,-0.262 0.074,-0.037 0.139,-0.048 0.267,-0.049 l 0.108,0 0,0.116 0,0.117 -0.1,0.003 c -0.088,0.003 -0.106,0.006 -0.142,0.023 -0.058,0.027 -0.094,0.06 -0.119,0.111 -0.018,0.037 -0.021,0.052 -0.021,0.107 0,0.055 0.003,0.071 0.021,0.107 0.026,0.052 0.07,0.098 0.118,0.121 0.05,0.025 0.15,0.025 0.197,0 0.046,-0.025 0.091,-0.072 0.114,-0.121 l 0.02,-0.043 0.002,-0.271 0.002,-0.271 0.34,0 0.34,0 0,0.297 c 0,0.336 0,0.334 0.059,0.385 0.086,0.074 0.226,0.053 0.274,-0.04 0.01,-0.019 0.017,-0.052 0.02,-0.087 l 0.004,-0.056 0.12,0 0.12,0 0,0.052 c 0,0.062 -0.023,0.156 -0.051,0.213 -0.043,0.085 -0.143,0.161 -0.245,0.185 -0.057,0.013 -0.171,0.015 -0.228,0.003 -0.112,-0.023 -0.222,-0.107 -0.269,-0.204 -0.042,-0.087 -0.047,-0.12 -0.047,-0.327 l 0,-0.188 -0.099,0 -0.098,0 0,0.154 c 0,0.128 -0.002,0.164 -0.015,0.212 -0.044,0.172 -0.176,0.306 -0.344,0.349 -0.069,0.019 -0.192,0.016 -0.262,-0.004 z" /><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path47"
|
||||
d="M 5.34,951.549 C 5.203,951.512 5.098,951.411 5.054,951.273 5.043,951.239 5.04,951.194 5.037,951.029 l -0.003,-0.203 -0.105,0 -0.106,0 0,0.356 0,0.356 -0.121,0 -0.121,0 0,-0.469 0,-0.469 0.348,0 0.348,0 0,0.276 c 0,0.168 0.003,0.291 0.008,0.314 0.01,0.049 0.044,0.094 0.085,0.116 0.026,0.014 0.045,0.017 0.093,0.017 0.08,0 0.121,-0.022 0.151,-0.081 l 0.02,-0.039 0,-0.301 0,-0.302 0.105,0 c 0.092,0 0.107,0.002 0.123,0.014 l 0.018,0.015 0,0.294 c 0,0.255 -0.002,0.3 -0.013,0.342 -0.022,0.081 -0.05,0.131 -0.103,0.184 -0.082,0.082 -0.167,0.113 -0.303,0.112 -0.045,0 -0.099,-0.006 -0.121,-0.012 z" /></g><path
|
||||
inkscape:connector-curvature="0"
|
||||
id="path49"
|
||||
d="M 403.52901,561.50203" /></g></svg>
|
||||
|
Before Width: | Height: | Size: 20 KiB |
-3323
File diff suppressed because it is too large
Load Diff
@@ -1,117 +0,0 @@
|
||||
{
|
||||
"name": "auto-build",
|
||||
"displayName": "Auto Build Marlin",
|
||||
"description": "Auto Build Marlin for VS code",
|
||||
"version": "2.0.0",
|
||||
"publisher": "marlinfirmware",
|
||||
"icon": "logo.svg",
|
||||
"engines": {
|
||||
"vscode": "^1.32.0"
|
||||
},
|
||||
"enableProposedApi": true,
|
||||
"categories": [
|
||||
"Other"
|
||||
],
|
||||
"activationEvents": [
|
||||
"onCommand:mfbuild",
|
||||
"onCommand:mfclean",
|
||||
"onCommand:mfupload",
|
||||
"onCommand:mftraceback"
|
||||
],
|
||||
"main": "./extension",
|
||||
"contributes": {
|
||||
"viewsContainers": {
|
||||
"activitybar": [
|
||||
{
|
||||
"id": "autoBuildVC",
|
||||
"title": "Marlin Build",
|
||||
"icon": "resources/AB.svg"
|
||||
}
|
||||
]
|
||||
},
|
||||
"views": {
|
||||
"autoBuildVC": [
|
||||
{
|
||||
"id": "autoBuildView",
|
||||
"name": "Build…"
|
||||
},
|
||||
{
|
||||
"id": "marlinView",
|
||||
"name": "Marlin Info"
|
||||
}
|
||||
]
|
||||
},
|
||||
"commands": [
|
||||
{
|
||||
"command": "mfbuild",
|
||||
"title": "Build",
|
||||
"icon": {
|
||||
"light": "resources/B48x48_light.svg",
|
||||
"dark": "resources/B48x48_dark.svg"
|
||||
}
|
||||
},
|
||||
{
|
||||
"command": "mfupload",
|
||||
"title": "Upload",
|
||||
"icon": {
|
||||
"light": "resources/U48x48_light.svg",
|
||||
"dark": "resources/U48x48_dark.svg"
|
||||
}
|
||||
},
|
||||
{
|
||||
"command": "mftraceback",
|
||||
"title": "Upload (traceback)",
|
||||
"icon": {
|
||||
"light": "resources/T48x48_light.svg",
|
||||
"dark": "resources/T48x48_dark.svg"
|
||||
}
|
||||
},
|
||||
{
|
||||
"command": "mfclean",
|
||||
"title": "Clean",
|
||||
"icon": {
|
||||
"light": "resources/C48x48_light.svg",
|
||||
"dark": "resources/C48x48_dark.svg"
|
||||
}
|
||||
}
|
||||
],
|
||||
"menus": {
|
||||
"view/title": [
|
||||
{
|
||||
"command": "mfbuild",
|
||||
"group": "navigation@1",
|
||||
"when": "view == autoBuildView || view == marlinView"
|
||||
},
|
||||
{
|
||||
"command": "mfupload",
|
||||
"group": "navigation@2",
|
||||
"when": "view == autoBuildView || view == marlinView"
|
||||
},
|
||||
{
|
||||
"command": "mftraceback",
|
||||
"group": "navigation@3",
|
||||
"when": "view == autoBuildView || view == marlinView"
|
||||
},
|
||||
{
|
||||
"command": "mfclean",
|
||||
"group": "navigation@4",
|
||||
"when": "view == autoBuildView || view == marlinView"
|
||||
}
|
||||
]
|
||||
}
|
||||
},
|
||||
"scripts": {
|
||||
"vscode:prepublish": "npm run compile",
|
||||
"compile": "tsc -p ./",
|
||||
"watch": "tsc -watch -p ./",
|
||||
"postinstall": "node ./node_modules/vscode/bin/install",
|
||||
"test": "npm run compile && node ./node_modules/vscode/bin/test"
|
||||
},
|
||||
"devDependencies": {
|
||||
"@types/vscode": "^1.34.0",
|
||||
"typescript": "^3.5.1",
|
||||
"tslint": "^5.16.0",
|
||||
"@types/node": "^10.14.17",
|
||||
"@types/mocha": "^2.2.42"
|
||||
}
|
||||
}
|
||||
@@ -1,23 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="74"
|
||||
height="68"
|
||||
version="1.1">
|
||||
<!-- Created with SVG-edit - http://svg-edit.googlecode.com/ -->
|
||||
<title>AutoBuildMarlin View</title>
|
||||
<g
|
||||
transform="matrix(0.92865175,0,0,0.97009223,1.4847157,1.0636373)"
|
||||
style="stroke-width:1.05357885">
|
||||
<path
|
||||
d="M 11.136251,-1.096429 V 0.65746893 H 7.6344377 V 2.4082389 H 5.8835346 V 4.1621368 H 4.1294904 V 5.9128924 H 2.378583 V 7.6667969 H 0.62767696 V 11.171465 H -1.1232297 v 45.56378 h 1.75090666 v 3.504652 H 2.378583 v 1.750767 h 1.7509074 v 1.753904 h 1.7540442 v 1.750758 h 1.7509031 v 1.753903 h 3.5018133 v 1.75077 h 54.215335 v -1.75077 h 3.501813 v -1.753903 h 1.750911 v -1.750758 h 1.754045 v -1.753904 h 1.750905 v -1.750767 h 1.750909 v -3.504652 h 1.750903 V 0.65746893 H 75.860169 V -1.096429 Z"
|
||||
style="display:inline;opacity:0.2;fill:#ffffff;stroke:none;stroke-width:1.4047718" />
|
||||
<path
|
||||
d="m 23.819389,8.3649514 v 1.7008096 h -3.4019 v 1.703862 h -1.700946 v 1.703855 h -1.703998 v 1.700811 h -1.700954 v 3.404672 h -1.700946 v 39.155205 h 1.700946 v 1.703864 h 8.507798 V 20.282816 h 1.700952 v -1.703855 h 6.806845 v 1.703855 h 1.700947 V 59.43803 h 10.20875 V 20.282816 h 1.700946 v -1.703855 h 6.803799 v 1.703855 h 1.700946 V 59.43803 H 64.651325 V 18.578961 H 62.950373 V 15.174289 H 61.249426 V 13.473478 H 59.548472 V 11.769623 H 57.847527 V 10.065761 H 54.442574 V 8.3649514 h -8.504745 v 1.7008096 h -3.401898 v 1.703862 h -1.704 v 1.703855 H 37.430032 V 11.769623 H 35.729087 V 10.065761 H 32.327186 V 8.3649514 Z"
|
||||
style="display:inline;fill:#000000;stroke:none;stroke-width:1.40477192" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 1.9 KiB |
@@ -1,26 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.2;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<g style="fill:#ffffff;stroke-width:0.68261832"
|
||||
transform="matrix(1.0358745,-1.0358745,1.0358745,1.0358745,-4.5037807,307.49351)">
|
||||
<path
|
||||
d="m 12.381356,1.694916 h 3.237288 c 1.108,0 2,0.892 2,2 v 26.61017 c 0,1.108 -0.892,2 -2,2 h -3.237288 c -1.108,0 -2,-0.892 -2,-2 V 3.694916 c 0,-1.108 0.892,-2 2,-2 z"
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.64499366;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate" />
|
||||
<path
|
||||
d="m 3.9747747,3.1347656 c -1.108,0 -1.9999999,0.892 -1.9999999,2 v 5.7304684 c 0,1.108 0.8919999,2 1.9999999,2 h 0.7285157 c 1.108,0 1.057191,-2 2,-2 c 0.942809,0 0.892,2 2,2 H 18.940777 c 1.034412,0 1.870684,-0.780314 1.978516,-1.785156 c 0.008,-0.02402 0.02148,-0.03558 0.02148,-0.07617 c 0,-5.1313556 2.471516,-2.7014765 3.261719,-2.2207029 c 0.752118,0.4576024 2.31379,-0.800384 1.572265,-2.1054687 C 25.033235,5.3726496 20.940777,3.1812006 18.940777,3.1347656 H 8.7032904 c -1.108,0 -1.057191,2 -2,2 c -0.942809,0 -0.892,-2 -2,-2 z"
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.64499366;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 2.8 KiB |
@@ -1,26 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.5;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<g style="fill:#000000;stroke-width:0.68261832"
|
||||
transform="matrix(1.0358745,-1.0358745,1.0358745,1.0358745,-4.5037807,307.49351)">
|
||||
<path
|
||||
d="m 12.381356,1.694916 h 3.237288 c 1.108,0 2,0.892 2,2 v 26.61017 c 0,1.108 -0.892,2 -2,2 h -3.237288 c -1.108,0 -2,-0.892 -2,-2 V 3.694916 c 0,-1.108 0.892,-2 2,-2 z"
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.64499366;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate" />
|
||||
<path
|
||||
d="m 3.9747747,3.1347656 c -1.108,0 -1.9999999,0.892 -1.9999999,2 v 5.7304684 c 0,1.108 0.8919999,2 1.9999999,2 h 0.7285157 c 1.108,0 1.057191,-2 2,-2 c 0.942809,0 0.892,2 2,2 H 18.940777 c 1.034412,0 1.870684,-0.780314 1.978516,-1.785156 c 0.008,-0.02402 0.02148,-0.03558 0.02148,-0.07617 c 0,-5.1313556 2.471516,-2.7014765 3.261719,-2.2207029 c 0.752118,0.4576024 2.31379,-0.800384 1.572265,-2.1054687 C 25.033235,5.3726496 20.940777,3.1812006 18.940777,3.1347656 H 8.7032904 c -1.108,0 -1.057191,2 -2,2 c -0.942809,0 -0.892,-2 -2,-2 z"
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.64499366;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 2.8 KiB |
@@ -1,24 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.2;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<path
|
||||
style="fill:#ffffff;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="M 5 12 L 5 14 L 6 15 L 9 43 L 10 44 L 38 44 L 39 43 L 42 15 L 43 14 L 43 12 L 5 12 z M 12 16 L 14 16 L 15 17 L 17 39 L 16 40 L 14 40 L 13 39 L 11 17 L 12 16 z M 23 16 L 25 16 L 26 17 L 26 39 L 25 40 L 23 40 L 22 39 L 22 17 L 23 16 z M 34 16 L 36 16 L 37 17 L 35 39 L 34 40 L 32 40 L 31 39 L 33 17 L 34 16 z "
|
||||
transform="translate(0,284.3)" />
|
||||
<path
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.94488192;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 5,292.3 h 1 v -1 l 9,-2 h 4 l 1,-2 h 7 l 1,2 h 5 l 9,2 v 1 h 1 v 2 H 5 Z" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 1.9 KiB |
@@ -1,25 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.5;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<g style="fill:#000000">
|
||||
<path
|
||||
style="fill:#000000;fill-rule:evenodd;stroke:none;stroke-width:0.99999994px;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 5,296.3 v 2 l 1,1 l 3,28 l 1,1 h 28 l 1,-1 l 3,-28 l 1,-1 v -2 z m 7,4 h 2 l 1,1 l 2,22 l -1,1 h -2 l -1,-1 l -2,-22 z m 11,0 h 2 l 1,1 v 22 l -1,1 h -2 l -1,-1 v -22 z m 11,0 h 2 l 1,1 l -2,22 l -1,1 h -2 l -1,-1 l 2,-22 z" />
|
||||
<path
|
||||
style="color:#000000;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:0.94488192;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 5,292.3 h 1 v -1 l 9,-2 h 4 l 1,-2 h 7 l 1,2 h 5 l 9,2 v 1 h 1 v 2 H 5 Z" />
|
||||
</g>
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 1.8 KiB |
@@ -1,53 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.2;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<g
|
||||
transform="matrix(0.88888892,0,0,0.88888892,4.5570375,46.942926)"
|
||||
style="fill:none;stroke:#ff00ff;stroke-width:1.125;stroke-linejoin:miter;stroke-linecap:square" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 11,303.3 v 3 h 26 v -3 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 26,305.3 h -4 v 20 h 4 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:square;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 24,294.80508 c -8.815928,0 -16.00078,7.18486 -16.00078,16.00078 c 0,8.81593 7.184852,16.00078 16.00078,16.00078 c 8.815928,0 16.00078,-7.18485 16.00078,-16.00078 c 0,-8.81592 -7.184852,-16.00078 -16.00078,-16.00078 z m 0,3.00079 c 7.201699,0 13,5.79829 13,12.99999 c 0,7.2017 -5.798301,12.99999 -13,12.99999 c -7.201699,0 -13,-5.79829 -13,-12.99999 c 0,-7.2017 5.798301,-12.99999 13,-12.99999 z" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 4,306.80508 l 6,2" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 3,314.80508 h 7" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 6,322.80508 l 6,-3" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 44,306.80508 l -6,2" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="M 45,314.80508 H 38" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 42,322.80508 l -6,-3" />
|
||||
<path
|
||||
style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 37,291.80508 c 0,0 -10,-5 -10,5" />
|
||||
<path
|
||||
style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#ffffff;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 11,291.80508 c 0,0 10,-5 10,5" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 6.7 KiB |
@@ -1,53 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.5;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<g
|
||||
transform="matrix(0.88888892,0,0,0.88888892,4.5570375,46.942926)"
|
||||
style="fill:none;stroke:#ff00ff;stroke-width:1.125;stroke-linejoin:miter;stroke-linecap:square" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 11,303.3 v 3 h 26 v -3 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 26,305.3 h -4 v 20 h 4 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:4;stroke-linecap:square;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;paint-order:stroke fill markers;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 24,294.80508 c -8.815928,0 -16.00078,7.18486 -16.00078,16.00078 c 0,8.81593 7.184852,16.00078 16.00078,16.00078 c 8.815928,0 16.00078,-7.18485 16.00078,-16.00078 c 0,-8.81592 -7.184852,-16.00078 -16.00078,-16.00078 z m 0,3.00079 c 7.201699,0 13,5.79829 13,12.99999 c 0,7.2017 -5.798301,12.99999 -13,12.99999 c -7.201699,0 -13,-5.79829 -13,-12.99999 c 0,-7.2017 5.798301,-12.99999 13,-12.99999 z" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 4,306.80508 l 6,2" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 3,314.80508 h 7" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 6,322.80508 l 6,-3" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 44,306.80508 l -6,2" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="M 45,314.80508 H 38" />
|
||||
<path
|
||||
style="fill:none;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-opacity:1"
|
||||
d="m 42,322.80508 l -6,-3" />
|
||||
<path
|
||||
style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 37,291.80508 c 0,0 -10,-5 -10,5" />
|
||||
<path
|
||||
style="opacity:1;vector-effect:none;fill:none;fill-opacity:1;fill-rule:evenodd;stroke:#000000;stroke-width:3;stroke-linecap:butt;stroke-linejoin:miter;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1"
|
||||
d="m 11,291.80508 c 0,0 10,-5 10,5" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 6.7 KiB |
@@ -1,26 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.2;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:6;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="M 24.001953,298.5793 L 9,317.3 h 10 v 10 h 10 v -10 h 10 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#ffffff;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:6;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 9,291.3 v 6 h 30 v -6 z" />
|
||||
<g
|
||||
transform="matrix(0.88888892,0,0,0.88888892,4.5570375,46.942926)"
|
||||
style="fill:none;stroke:#ff00ff;stroke-width:1.125;stroke-linejoin:miter;stroke-linecap:square" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 3.4 KiB |
@@ -1,26 +0,0 @@
|
||||
<?xml version="1.0" encoding="UTF-8" standalone="no"?>
|
||||
<!-- Created with Inkscape (http://www.inkscape.org/) -->
|
||||
<svg
|
||||
xmlns:dc="http://purl.org/dc/elements/1.1/"
|
||||
xmlns:cc="http://creativecommons.org/ns#"
|
||||
xmlns:rdf="http://www.w3.org/1999/02/22-rdf-syntax-ns#"
|
||||
xmlns:svg="http://www.w3.org/2000/svg"
|
||||
xmlns="http://www.w3.org/2000/svg"
|
||||
width="48" height="48"
|
||||
viewBox="0 0 48 48"
|
||||
version="1.1">
|
||||
<g transform="translate(0,-284.3)">
|
||||
<path
|
||||
style="display:inline;opacity:0.5;fill:#ffffff;stroke:none;stroke-width:1.33333266"
|
||||
d="m 7,284.3 v 1 H 5 v 2 H 3 v 2 H 1 v 2 H 0 v 34 h 1 v 2 h 2 v 2 h 2 v 2 h 2 v 1 h 34 v -1 h 2 v -2 h 2 v -2 h 2 v -2 h 1 v -39.91815 h -1.03376 v -1.08183 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:6;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="M 24.001953,298.5793 L 9,317.3 h 10 v 10 h 10 v -10 h 10 z" />
|
||||
<path
|
||||
style="color:#000000;font-style:normal;font-variant:normal;font-weight:normal;font-stretch:normal;font-size:medium;line-height:normal;font-family:sans-serif;font-variant-ligatures:normal;font-variant-position:normal;font-variant-caps:normal;font-variant-numeric:normal;font-variant-alternates:normal;font-feature-settings:normal;text-indent:0;text-align:start;text-decoration:none;text-decoration-line:none;text-decoration-style:solid;text-decoration-color:#000000;letter-spacing:normal;word-spacing:normal;text-transform:none;writing-mode:lr-tb;direction:ltr;text-orientation:mixed;dominant-baseline:auto;baseline-shift:baseline;text-anchor:start;white-space:normal;shape-padding:0;clip-rule:nonzero;display:inline;overflow:visible;visibility:visible;opacity:1;isolation:auto;mix-blend-mode:normal;color-interpolation:sRGB;color-interpolation-filters:linearRGB;solid-color:#000000;solid-opacity:1;vector-effect:none;fill:#000000;fill-opacity:1;fill-rule:evenodd;stroke:none;stroke-width:6;stroke-linecap:square;stroke-linejoin:round;stroke-miterlimit:4;stroke-dasharray:none;stroke-dashoffset:0;stroke-opacity:1;color-rendering:auto;image-rendering:auto;shape-rendering:auto;text-rendering:auto;enable-background:accumulate"
|
||||
d="m 9,291.3 v 6 h 30 v -6 z" />
|
||||
<g
|
||||
transform="matrix(0.88888892,0,0,0.88888892,4.5570375,46.942926)"
|
||||
style="fill:none;stroke:#ff00ff;stroke-width:1.125;stroke-linejoin:miter;stroke-linecap:square" />
|
||||
</g>
|
||||
</svg>
|
||||
|
Before Width: | Height: | Size: 3.4 KiB |
@@ -1,12 +0,0 @@
|
||||
{
|
||||
"compilerOptions": {
|
||||
"module": "commonjs",
|
||||
"target": "es6",
|
||||
"outDir": "out",
|
||||
"lib": [
|
||||
"es6"
|
||||
],
|
||||
"sourceMap": true,
|
||||
"rootDir": "."
|
||||
}
|
||||
}
|
||||
Reference in New Issue
Block a user