Bump to head plus G34 auto assignment
This commit is contained in:
InsanityAutomation
@@ -516,9 +516,9 @@
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_bedKp 10.00
|
||||
#define DEFAULT_bedKi .023
|
||||
#define DEFAULT_bedKd 305.4
|
||||
//#define DEFAULT_bedKp 10.00
|
||||
//#define DEFAULT_bedKi .023
|
||||
//#define DEFAULT_bedKd 305.4
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from pidautotune
|
||||
@@ -527,6 +527,9 @@
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#define DEFAULT_bedKp 50.71
|
||||
#define DEFAULT_bedKi 9.88
|
||||
#define DEFAULT_bedKd 173.43
|
||||
#endif // PIDTEMPBED
|
||||
|
||||
// @section extruder
|
||||
@@ -844,6 +847,12 @@
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Use the nozzle as the probe, as with a conductive
|
||||
* nozzle system or a piezo-electric smart effector.
|
||||
*/
|
||||
//#define NOZZLE_AS_PROBE
|
||||
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
@@ -912,7 +921,8 @@
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
@@ -1199,7 +1209,7 @@
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
@@ -1624,7 +1634,7 @@
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
/**
|
||||
* LCD Menu Items
|
||||
@@ -1758,7 +1768,7 @@
|
||||
|
||||
//
|
||||
// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
|
||||
// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
|
||||
// https://www.aliexpress.com/item/32765887917.html
|
||||
//
|
||||
//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
|
||||
|
||||
@@ -1932,13 +1942,18 @@
|
||||
|
||||
//
|
||||
// Factory display for Creality CR-10
|
||||
// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
|
||||
// https://www.aliexpress.com/item/32833148327.html
|
||||
//
|
||||
// This is RAMPS-compatible using a single 10-pin connector.
|
||||
// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
|
||||
//
|
||||
#define CR10_STOCKDISPLAY
|
||||
|
||||
//
|
||||
// Ender-2 OEM display, a variant of the MKS_MINI_12864
|
||||
//
|
||||
//#define ENDER2_STOCKDISPLAY
|
||||
|
||||
//
|
||||
// ANET and Tronxy Graphical Controller
|
||||
//
|
||||
@@ -2007,9 +2022,11 @@
|
||||
//=============================================================================
|
||||
|
||||
//
|
||||
// DGUS Touch Display with DWIN OS
|
||||
// DGUS Touch Display with DWIN OS. (Choose one.)
|
||||
//
|
||||
//#define DGUS_LCD
|
||||
//#define DGUS_LCD_UI_ORIGIN
|
||||
//#define DGUS_LCD_UI_FYSETC
|
||||
//#define DGUS_LCD_UI_HIPRECY
|
||||
|
||||
//
|
||||
// Touch-screen LCD for Malyan M200 printers
|
||||
|
||||
@@ -656,7 +656,21 @@
|
||||
//#define Z_STEPPER_AUTO_ALIGN
|
||||
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
||||
// Define probe X and Y positions for Z1, Z2 [, Z3]
|
||||
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
|
||||
// If not defined, probe limits will be used.
|
||||
//#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
|
||||
|
||||
/**
|
||||
* Rotrate automatically calulated positions clockwise
|
||||
* For 2 point
|
||||
* Enabled and not 0 rotates to X center and Y edges
|
||||
*
|
||||
* For 3 point
|
||||
* 0 or Undefined sets Point 1 Front Left
|
||||
* 1 sets Point 1 Rear left
|
||||
* 2 sets Point 1 Rear Right
|
||||
* 3 sets Point 1 Front Right
|
||||
*/
|
||||
//#define Z_STEPPER_ALIGN_ROTATE 0
|
||||
|
||||
// Provide Z stepper positions for more rapid convergence in bed alignment.
|
||||
// Currently requires triple stepper drivers.
|
||||
@@ -674,7 +688,7 @@
|
||||
#endif
|
||||
|
||||
// Set number of iterations to align
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5
|
||||
|
||||
// Enable to restore leveling setup after operation
|
||||
#define RESTORE_LEVELING_AFTER_G34
|
||||
@@ -1150,7 +1164,7 @@
|
||||
*
|
||||
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
|
||||
*/
|
||||
//#define SDCARD_CONNECTION LCD
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#endif // SDSUPPORT
|
||||
@@ -1243,6 +1257,44 @@
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
//
|
||||
// Additional options for DGUS / DWIN displays
|
||||
//
|
||||
#if HAS_DGUS_LCD
|
||||
#define DGUS_SERIAL_PORT 2
|
||||
#define DGUS_BAUDRATE 115200
|
||||
|
||||
#define DGUS_RX_BUFFER_SIZE 128
|
||||
#define DGUS_TX_BUFFER_SIZE 48
|
||||
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
|
||||
|
||||
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
|
||||
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
|
||||
|
||||
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
|
||||
#define DGUS_PRINT_FILENAME // Display the filename during printing
|
||||
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
|
||||
|
||||
#if ENABLED(DGUS_LCD_UI_FYSETC)
|
||||
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
|
||||
#else
|
||||
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
|
||||
#endif
|
||||
|
||||
#define DGUS_FILAMENT_LOADUNLOAD
|
||||
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
|
||||
#define DGUS_FILAMENT_PURGE_LENGTH 10
|
||||
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
|
||||
#endif
|
||||
|
||||
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
|
||||
#if ENABLED(DGUS_UI_WAITING)
|
||||
#define DGUS_UI_WAITING_STATUS 10
|
||||
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
|
||||
#endif
|
||||
#endif
|
||||
#endif // HAS_DGUS_LCD
|
||||
|
||||
//
|
||||
// Touch UI for the FTDI Embedded Video Engine (EVE)
|
||||
//
|
||||
@@ -1438,7 +1490,8 @@
|
||||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
@@ -1548,12 +1601,12 @@
|
||||
/**
|
||||
* Maximum stepping rate (in Hz) the stepper driver allows
|
||||
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
|
||||
* 500000 : Maximum for A4988 stepper driver
|
||||
* 400000 : Maximum for TMC2xxx stepper drivers
|
||||
* 250000 : Maximum for DRV8825 stepper driver
|
||||
* 200000 : Maximum for LV8729 stepper driver
|
||||
* 150000 : Maximum for TB6600 stepper driver
|
||||
* 15000 : Maximum for TB6560 stepper driver
|
||||
* 5000000 : Maximum for TMC2xxx stepper drivers
|
||||
* 1000000 : Maximum for LV8729 stepper driver
|
||||
* 500000 : Maximum for A4988 stepper driver
|
||||
* 250000 : Maximum for DRV8825 stepper driver
|
||||
* 150000 : Maximum for TB6600 stepper driver
|
||||
* 15000 : Maximum for TB6560 stepper driver
|
||||
*
|
||||
* Override the default value based on the driver type set in Configuration.h.
|
||||
*/
|
||||
@@ -1573,16 +1626,16 @@
|
||||
// The number of linear motions that can be in the plan at any give time.
|
||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||
#define BLOCK_BUFFER_SIZE 32 // maximize block buffer
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 32
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
@@ -1591,7 +1644,7 @@
|
||||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 32
|
||||
|
||||
// Host Receive Buffer Size
|
||||
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
|
||||
@@ -1751,9 +1804,10 @@
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
@@ -2090,7 +2144,7 @@
|
||||
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
|
||||
* M913 X/Y/Z/E to live tune the setting
|
||||
*/
|
||||
//#define HYBRID_THRESHOLD
|
||||
#define HYBRID_THRESHOLD
|
||||
|
||||
#define X_HYBRID_THRESHOLD 100 // [mm/s]
|
||||
#define X2_HYBRID_THRESHOLD 100
|
||||
@@ -2128,8 +2182,6 @@
|
||||
*
|
||||
* IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
|
||||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* TMC2209 requires STEALTHCHOP enabled for SENSORLESS_HOMING
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
@@ -2148,7 +2200,6 @@
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
//#define SPI_ENDSTOPS // TMC2130 only
|
||||
//#define HOME_USING_SPREADCYCLE
|
||||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
@@ -2726,7 +2777,11 @@
|
||||
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
|
||||
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
|
||||
|
||||
// Use M119 to find reasonable values after connecting your hardware:
|
||||
//#define INVERT_JOY_X // Enable if X direction is reversed
|
||||
//#define INVERT_JOY_Y // Enable if Y direction is reversed
|
||||
//#define INVERT_JOY_Z // Enable if Z direction is reversed
|
||||
|
||||
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
|
||||
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
|
||||
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
|
||||
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
|
||||
|
||||
@@ -516,9 +516,9 @@
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_bedKp 10.00
|
||||
#define DEFAULT_bedKi .023
|
||||
#define DEFAULT_bedKd 305.4
|
||||
//#define DEFAULT_bedKp 10.00
|
||||
//#define DEFAULT_bedKi .023
|
||||
//#define DEFAULT_bedKd 305.4
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from pidautotune
|
||||
@@ -527,6 +527,10 @@
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#define DEFAULT_bedKp 50.71
|
||||
#define DEFAULT_bedKi 9.88
|
||||
#define DEFAULT_bedKd 173.43
|
||||
|
||||
#endif // PIDTEMPBED
|
||||
|
||||
// @section extruder
|
||||
@@ -844,6 +848,12 @@
|
||||
*/
|
||||
//#define FIX_MOUNTED_PROBE
|
||||
|
||||
/**
|
||||
* Use the nozzle as the probe, as with a conductive
|
||||
* nozzle system or a piezo-electric smart effector.
|
||||
*/
|
||||
//#define NOZZLE_AS_PROBE
|
||||
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
@@ -912,7 +922,8 @@
|
||||
*/
|
||||
#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
// Most probes should stay away from the edges of the bed, but
|
||||
// with NOZZLE_AS_PROBE this can be negative for a wider probing area.
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
@@ -1199,7 +1210,7 @@
|
||||
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_X 5
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
@@ -1624,7 +1635,7 @@
|
||||
*
|
||||
* Use CRC checks and retries on the SD communication.
|
||||
*/
|
||||
#define SD_CHECK_AND_RETRY
|
||||
//#define SD_CHECK_AND_RETRY
|
||||
|
||||
/**
|
||||
* LCD Menu Items
|
||||
@@ -1758,7 +1769,7 @@
|
||||
|
||||
//
|
||||
// Makeboard 3D Printer Parts 3D Printer Mini Display 1602 Mini Controller
|
||||
// https://www.aliexpress.com/item/Micromake-Makeboard-3D-Printer-Parts-3D-Printer-Mini-Display-1602-Mini-Controller-Compatible-with-Ramps-1/32765887917.html
|
||||
// https://www.aliexpress.com/item/32765887917.html
|
||||
//
|
||||
//#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
|
||||
|
||||
@@ -1932,13 +1943,18 @@
|
||||
|
||||
//
|
||||
// Factory display for Creality CR-10
|
||||
// https://www.aliexpress.com/item/Universal-LCD-12864-3D-Printer-Display-Screen-With-Encoder-For-CR-10-CR-7-Model/32833148327.html
|
||||
// https://www.aliexpress.com/item/32833148327.html
|
||||
//
|
||||
// This is RAMPS-compatible using a single 10-pin connector.
|
||||
// (For CR-10 owners who want to replace the Melzi Creality board but retain the display)
|
||||
//
|
||||
#define CR10_STOCKDISPLAY
|
||||
|
||||
//
|
||||
// Ender-2 OEM display, a variant of the MKS_MINI_12864
|
||||
//
|
||||
//#define ENDER2_STOCKDISPLAY
|
||||
|
||||
//
|
||||
// ANET and Tronxy Graphical Controller
|
||||
//
|
||||
@@ -2007,9 +2023,11 @@
|
||||
//=============================================================================
|
||||
|
||||
//
|
||||
// DGUS Touch Display with DWIN OS
|
||||
// DGUS Touch Display with DWIN OS. (Choose one.)
|
||||
//
|
||||
//#define DGUS_LCD
|
||||
//#define DGUS_LCD_UI_ORIGIN
|
||||
//#define DGUS_LCD_UI_FYSETC
|
||||
//#define DGUS_LCD_UI_HIPRECY
|
||||
|
||||
//
|
||||
// Touch-screen LCD for Malyan M200 printers
|
||||
|
||||
@@ -656,7 +656,21 @@
|
||||
//#define Z_STEPPER_AUTO_ALIGN
|
||||
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
||||
// Define probe X and Y positions for Z1, Z2 [, Z3]
|
||||
#define Z_STEPPER_ALIGN_XY { { 10, 290 }, { 150, 10 }, { 290, 290 } }
|
||||
// If not defined, probe limits will be used.
|
||||
//#define Z_STEPPER_ALIGN_XY { { 10, 190 }, { 100, 10 }, { 190, 190 } }
|
||||
|
||||
/**
|
||||
* Rotrate automatically calulated positions clockwise
|
||||
* For 2 point
|
||||
* Enabled and not 0 rotates to X center and Y edges
|
||||
*
|
||||
* For 3 point
|
||||
* 0 or Undefined sets Point 1 Front Left
|
||||
* 1 sets Point 1 Rear left
|
||||
* 2 sets Point 1 Rear Right
|
||||
* 3 sets Point 1 Front Right
|
||||
*/
|
||||
//#define Z_STEPPER_ALIGN_ROTATE 0
|
||||
|
||||
// Provide Z stepper positions for more rapid convergence in bed alignment.
|
||||
// Currently requires triple stepper drivers.
|
||||
@@ -674,7 +688,7 @@
|
||||
#endif
|
||||
|
||||
// Set number of iterations to align
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 3
|
||||
#define Z_STEPPER_ALIGN_ITERATIONS 5
|
||||
|
||||
// Enable to restore leveling setup after operation
|
||||
#define RESTORE_LEVELING_AFTER_G34
|
||||
@@ -1150,7 +1164,7 @@
|
||||
*
|
||||
* :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
|
||||
*/
|
||||
//#define SDCARD_CONNECTION LCD
|
||||
#define SDCARD_CONNECTION ONBOARD
|
||||
#endif
|
||||
|
||||
#endif // SDSUPPORT
|
||||
@@ -1243,6 +1257,44 @@
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
//
|
||||
// Additional options for DGUS / DWIN displays
|
||||
//
|
||||
#if HAS_DGUS_LCD
|
||||
#define DGUS_SERIAL_PORT 2
|
||||
#define DGUS_BAUDRATE 115200
|
||||
|
||||
#define DGUS_RX_BUFFER_SIZE 128
|
||||
#define DGUS_TX_BUFFER_SIZE 48
|
||||
//#define DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
|
||||
|
||||
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
|
||||
#define BOOTSCREEN_TIMEOUT 3000 // (ms) Duration to display the boot screen
|
||||
|
||||
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
|
||||
#define DGUS_PRINT_FILENAME // Display the filename during printing
|
||||
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
|
||||
|
||||
#if ENABLED(DGUS_LCD_UI_FYSETC)
|
||||
//#define DUGS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
|
||||
#else
|
||||
#define DUGS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
|
||||
#endif
|
||||
|
||||
#define DGUS_FILAMENT_LOADUNLOAD
|
||||
#if ENABLED(DGUS_FILAMENT_LOADUNLOAD)
|
||||
#define DGUS_FILAMENT_PURGE_LENGTH 10
|
||||
#define DGUS_FILAMENT_LOAD_LENGTH_PER_TIME 0.5 // (mm) Adjust in proportion to DGUS_UPDATE_INTERVAL_MS
|
||||
#endif
|
||||
|
||||
#define DGUS_UI_WAITING // Show a "waiting" screen between some screens
|
||||
#if ENABLED(DGUS_UI_WAITING)
|
||||
#define DGUS_UI_WAITING_STATUS 10
|
||||
#define DGUS_UI_WAITING_STATUS_PERIOD 8 // Increase to slower waiting status looping
|
||||
#endif
|
||||
#endif
|
||||
#endif // HAS_DGUS_LCD
|
||||
|
||||
//
|
||||
// Touch UI for the FTDI Embedded Video Engine (EVE)
|
||||
//
|
||||
@@ -1438,7 +1490,8 @@
|
||||
* Override MIN_PROBE_EDGE for each side of the build plate
|
||||
* Useful to get probe points to exact positions on targets or
|
||||
* to allow leveling to avoid plate clamps on only specific
|
||||
* sides of the bed.
|
||||
* sides of the bed. With NOZZLE_AS_PROBE negative values are
|
||||
* allowed, to permit probing outside the bed.
|
||||
*
|
||||
* If you are replacing the prior *_PROBE_BED_POSITION options,
|
||||
* LEFT and FRONT values in most cases will map directly over
|
||||
@@ -1548,12 +1601,12 @@
|
||||
/**
|
||||
* Maximum stepping rate (in Hz) the stepper driver allows
|
||||
* If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
|
||||
* 500000 : Maximum for A4988 stepper driver
|
||||
* 400000 : Maximum for TMC2xxx stepper drivers
|
||||
* 250000 : Maximum for DRV8825 stepper driver
|
||||
* 200000 : Maximum for LV8729 stepper driver
|
||||
* 150000 : Maximum for TB6600 stepper driver
|
||||
* 15000 : Maximum for TB6560 stepper driver
|
||||
* 5000000 : Maximum for TMC2xxx stepper drivers
|
||||
* 1000000 : Maximum for LV8729 stepper driver
|
||||
* 500000 : Maximum for A4988 stepper driver
|
||||
* 250000 : Maximum for DRV8825 stepper driver
|
||||
* 150000 : Maximum for TB6600 stepper driver
|
||||
* 15000 : Maximum for TB6560 stepper driver
|
||||
*
|
||||
* Override the default value based on the driver type set in Configuration.h.
|
||||
*/
|
||||
@@ -1573,16 +1626,16 @@
|
||||
// The number of linear motions that can be in the plan at any give time.
|
||||
// THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
|
||||
#if ENABLED(SDSUPPORT)
|
||||
#define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#define BLOCK_BUFFER_SIZE 32 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16 // maximize block buffer
|
||||
#define BLOCK_BUFFER_SIZE 32 // maximize block buffer
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 32
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of PROGMEM (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
@@ -1591,7 +1644,7 @@
|
||||
// For debug-echo: 128 bytes for the optimal speed.
|
||||
// Other output doesn't need to be that speedy.
|
||||
// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
|
||||
#define TX_BUFFER_SIZE 0
|
||||
#define TX_BUFFER_SIZE 32
|
||||
|
||||
// Host Receive Buffer Size
|
||||
// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
|
||||
@@ -1751,9 +1804,10 @@
|
||||
//#define ADVANCED_PAUSE_FANS_PAUSE // Turn off print-cooling fans while the machine is paused.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_RETRACT 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_PURGE_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
@@ -2090,7 +2144,7 @@
|
||||
* STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
|
||||
* M913 X/Y/Z/E to live tune the setting
|
||||
*/
|
||||
//#define HYBRID_THRESHOLD
|
||||
#define HYBRID_THRESHOLD
|
||||
|
||||
#define X_HYBRID_THRESHOLD 100 // [mm/s]
|
||||
#define X2_HYBRID_THRESHOLD 100
|
||||
@@ -2128,8 +2182,6 @@
|
||||
*
|
||||
* IMPROVE_HOMING_RELIABILITY tunes acceleration and jerk when
|
||||
* homing and adds a guard period for endstop triggering.
|
||||
*
|
||||
* TMC2209 requires STEALTHCHOP enabled for SENSORLESS_HOMING
|
||||
*/
|
||||
//#define SENSORLESS_HOMING // StallGuard capable drivers only
|
||||
|
||||
@@ -2148,7 +2200,6 @@
|
||||
#define Y_STALL_SENSITIVITY 8
|
||||
//#define Z_STALL_SENSITIVITY 8
|
||||
//#define SPI_ENDSTOPS // TMC2130 only
|
||||
//#define HOME_USING_SPREADCYCLE
|
||||
//#define IMPROVE_HOMING_RELIABILITY
|
||||
#endif
|
||||
|
||||
@@ -2726,7 +2777,11 @@
|
||||
#define JOY_Z_PIN 12 // RAMPS: Suggested pin A12 on AUX2
|
||||
#define JOY_EN_PIN 44 // RAMPS: Suggested pin D44 on AUX2
|
||||
|
||||
// Use M119 to find reasonable values after connecting your hardware:
|
||||
//#define INVERT_JOY_X // Enable if X direction is reversed
|
||||
//#define INVERT_JOY_Y // Enable if Y direction is reversed
|
||||
//#define INVERT_JOY_Z // Enable if Z direction is reversed
|
||||
|
||||
// Use M119 with JOYSTICK_DEBUG to find reasonable values after connecting:
|
||||
#define JOY_X_LIMITS { 5600, 8190-100, 8190+100, 10800 } // min, deadzone start, deadzone end, max
|
||||
#define JOY_Y_LIMITS { 5600, 8250-100, 8250+100, 11000 }
|
||||
#define JOY_Z_LIMITS { 4800, 8080-100, 8080+100, 11550 }
|
||||
|
||||
Reference in New Issue
Block a user