Update MarlinCore.cpp

🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 (#26831 )
2024-04-10 15:12:02 -04:00 · 2024-04-07 19:33:27 -04:00 · 2024-04-07 12:05:35 -07:00 · 2024-04-07 10:49:36 -07:00 · 2024-04-07 09:37:37 -07:00 · 2024-04-07 08:52:35 -07:00
713 changed files with 21178 additions and 17960 deletions
@@ -1,40 +0,0 @@
 #
 # Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
 #
 # Number of days of inactivity before a closed issue or pull request is locked
 daysUntilLock: 60
 # Skip issues and pull requests created before a given timestamp. Timestamp must
 # follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
 skipCreatedBefore: false
 # Issues and pull requests with these labels will be ignored. Set to `[]` to disable
 exemptLabels: [ 'no-locking' ]
 # Label to add before locking, such as `outdated`. Set to `false` to disable
 lockLabel: false
 # Comment to post before locking. Set to `false` to disable
 lockComment: >
  This thread has been automatically locked since there has not been
  any recent activity after it was closed. Please open a new issue for
  related bugs.
 # Assign `resolved` as the reason for locking. Set to `false` to disable
 setLockReason: true
 # Limit to only `issues` or `pulls`
 # only: issues
 # Optionally, specify configuration settings just for `issues` or `pulls`
 # issues:
 #   exemptLabels:
 #     - help-wanted
 #   lockLabel: outdated
 # pulls:
 #   daysUntilLock: 30
 # Repository to extend settings from
 # _extends: repo
@@ -19,7 +19,7 @@ jobs:
    steps:
    - name: Check out bugfix-2.0.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
      with:
        ref: bugfix-2.0.x
@@ -39,7 +39,7 @@ jobs:
        exit 0
    - name: Check out bugfix-2.1.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
      with:
        ref: bugfix-2.1.x
@@ -32,7 +32,7 @@ jobs:
          - "Needs: Work"
    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Remove Labels
        uses: actions-ecosystem/action-remove-labels@v1
        with:
@@ -17,7 +17,7 @@ jobs:
    runs-on: ubuntu-latest
    steps:
-    - uses: actions/stale@v8
+    - uses: actions/stale@v9
      with:
        repo-token: ${{ secrets.GITHUB_TOKEN }}
        stale-issue-message: |
@@ -17,15 +17,15 @@ jobs:
    runs-on: ubuntu-latest
    steps:
-    - uses: dessant/lock-threads@v2
+    - uses: dessant/lock-threads@v5
      with:
        github-token: ${{ github.token }}
        process-only: 'issues'
-        issue-lock-inactive-days: '60'
+        issue-inactive-days: '60'
-        issue-exclude-created-before: ''
+        exclude-issue-created-before: ''
-        issue-exclude-labels: 'no-locking'
+        exclude-any-issue-labels: 'no-locking'
-        issue-lock-labels: ''
+        add-issue-labels: ''
-        issue-lock-comment: >
+        issue-comment: >
          This issue has been automatically locked since there
          has not been any recent activity after it was closed.
          Please open a new issue for related bugs.
@@ -152,7 +152,7 @@ jobs:
      uses: actions/checkout@v4
    - name: Cache pip
-      uses: actions/cache@v3
+      uses: actions/cache@v4
      with:
        path: ~/.cache/pip
        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
@@ -160,13 +160,13 @@ jobs:
          ${{ runner.os }}-pip-
    - name: Cache PlatformIO
-      uses: actions/cache@v3
+      uses: actions/cache@v4
      with:
        path: ~/.platformio
        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
    - name: Select Python 3.9
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
      with:
        python-version: '3.9'
        architecture: 'x64'
@@ -5,13 +5,14 @@ CONTAINER_IMAGE := marlin-dev
 help:
 	@echo "Tasks for local development:"
-	@echo "* format-pins:                 Reformat all pins files"
+	@echo "make marlin                    : Build marlin for the configured board"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
+	@echo "make format-pins               : Reformat all pins files"
-	@echo "* tests-single-local:          Run a single test locally"
+	@echo "make tests-single-ci           : Run a single test from inside the CI"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker"
+	@echo "make tests-single-local        : Run a single test locally"
-	@echo "* tests-all-local:             Run all tests locally"
+	@echo "make tests-single-local-docker : Run a single test locally, using docker"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker"
+	@echo "make tests-all-local           : Run all tests locally"
-	@echo "* setup-local-docker:          Build the local docker image"
+	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
 	@echo "make setup-local-docker        : Build the local docker image"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -24,46 +25,41 @@ help:
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
+
 marlin:
 	./buildroot/bin/mftest -a
 .PHONY: marlin
 tests-single-ci:
 	export GIT_RESET_HARD=true
 	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) PLATFORMIO_BUILD_FLAGS=-DGITHUB_ACTION
 .PHONY: tests-single-ci
 tests-single-local:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
 .PHONY: tests-single-local
 tests-single-local-docker:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
 .PHONY: tests-single-local-docker
 tests-all-local:
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
 .PHONY: tests-all-local
 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
 .PHONY: tests-all-local-docker
 setup-local-docker:
 	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
 .PHONY: setup-local-docker
 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')
 .PHONY: $(PINS)
 $(PINS): %:
-	@echo "Formatting $@" && node buildroot/share/scripts/pinsformat.js $@
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@
 format-pins: $(PINS)
@@ -61,14 +61,14 @@
 // @section info
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 // @section machine
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_BTT_OCTOPUS_V1_0
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 /**
@@ -79,7 +79,7 @@
 *
 * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
-#define SERIAL_PORT -1
+#define SERIAL_PORT 0
 /**
 * Serial Port Baud Rate
@@ -101,7 +101,7 @@
 * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
 * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
-#define SERIAL_PORT_2 1
+//#define SERIAL_PORT_2 -1
 //#define BAUDRATE_2 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE
 /**
@@ -116,7 +116,7 @@
 //#define BLUETOOTH
 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "FatBoy"
+//#define CUSTOM_MACHINE_NAME "3D Printer"
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -135,25 +135,25 @@
 * Options: A4988, A5984, DRV8825, LV8729, TB6560, TB6600, TMC2100,
 *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
 *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
- *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
+ *          TMC2660, TMC2660_STANDALONE, TMC5130, TMC5130_STANDALONE,
- *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
+ *          TMC5160, TMC5160_STANDALONE
- * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
 */
-#define X_DRIVER_TYPE  TB6560
+#define X_DRIVER_TYPE  A4988
-#define Y_DRIVER_TYPE  TB6560
+#define Y_DRIVER_TYPE  A4988
-#define Z_DRIVER_TYPE  TB6560
+#define Z_DRIVER_TYPE  A4988
 //#define X2_DRIVER_TYPE A4988
-#define Y2_DRIVER_TYPE TB6560
+//#define Y2_DRIVER_TYPE A4988
-#define Z2_DRIVER_TYPE TB6560
+//#define Z2_DRIVER_TYPE A4988
-#define Z3_DRIVER_TYPE TB6560
+//#define Z3_DRIVER_TYPE A4988
-#define Z4_DRIVER_TYPE TB6560
+//#define Z4_DRIVER_TYPE A4988
 //#define I_DRIVER_TYPE  A4988
 //#define J_DRIVER_TYPE  A4988
 //#define K_DRIVER_TYPE  A4988
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE TMC2209
+#define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -401,9 +401,18 @@
  //#define PS_OFF_SOUND            // Beep 1s when power off
  #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box
-  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
+  //#define PSU_DEFAULT_OFF             // Keep power off until enabled directly with M80
-  //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
+  //#define PSU_POWERUP_DELAY      250  // (ms) Delay for the PSU to warm up to full power
-  //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay
+  //#define LED_POWEROFF_TIMEOUT 10000  // (ms) Turn off LEDs after power-off, with this amount of delay
  //#define PSU_OFF_REDUNDANT           // Second pin for redundant power control
  //#define PSU_OFF_REDUNDANT_INVERTED  // Redundant pin state is the inverse of PSU_ACTIVE_STATE
  //#define PS_ON1_PIN               6  // Redundant pin required to enable power in combination with PS_ON_PIN
  //#define PS_ON_EDM_PIN            8  // External Device Monitoring pins for external power control relay feedback. Fault on mismatch.
  //#define PS_ON1_EDM_PIN           9
  #define PS_EDM_RESPONSE          250  // (ms) Time to allow for relay action
  //#define POWER_OFF_TIMER               // Enable M81 D<seconds> to power off after a delay
  //#define POWER_OFF_WAIT_FOR_COOLDOWN   // Enable M81 S to power off only after cooldown
@@ -552,7 +561,7 @@
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 11
+#define TEMP_SENSOR_BED 1
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
@@ -628,7 +637,7 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 300
+#define HEATER_0_MAXTEMP 275
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -636,7 +645,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      120
+#define BED_MAXTEMP      150
 #define CHAMBER_MAXTEMP  60
 /**
@@ -645,7 +654,7 @@
 * (especially before PID tuning). Setting the target temperature too close to MAXTEMP guarantees
 * a MAXTEMP shutdown! Use these values to forbid temperatures being set too close to MAXTEMP.
 */
-#define HOTEND_OVERSHOOT 10   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
+#define HOTEND_OVERSHOOT 15   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
 #define BED_OVERSHOOT    10   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
 #define COOLER_OVERSHOOT  2   // (°C) Forbid temperatures closer than OVERSHOOT
@@ -748,7 +757,7 @@
 * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
 * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
 */
-#define MAX_BED_POWER 180 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
 /**
 * PID Bed Heating
@@ -762,7 +771,7 @@
 *
 * With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
 */
-#define PIDTEMPBED
+//#define PIDTEMPBED
 #if ENABLED(PIDTEMPBED)
  //#define MIN_BED_POWER 0
@@ -833,8 +842,8 @@
  #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                  // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
-  #define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
-  #define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
 #endif
 // @section safety
@@ -1006,9 +1015,6 @@
    // Radius around the center where the arm cannot reach
    #define MIDDLE_DEAD_ZONE_R   0  // (mm)
    #define THETA_HOMING_OFFSET  0  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
    #define PSI_HOMING_OFFSET    0  // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
  #elif ENABLED(MP_SCARA)
    #define SCARA_OFFSET_THETA1  12 // degrees
@@ -1027,23 +1033,19 @@
  #define DEFAULT_SEGMENTS_PER_SECOND 200
  // Length of inner and outer support arms. Measure arm lengths precisely.
-  #define TPARA_LINKAGE_1 120       // (mm)
+  #define TPARA_LINKAGE_1 120     // (mm)
-  #define TPARA_LINKAGE_2 120       // (mm)
+  #define TPARA_LINKAGE_2 120     // (mm)
-  // SCARA tower offset (position of Tower relative to bed zero position)
+  // TPARA tower offset (position of Tower relative to bed zero position)
-  // This needs to be reasonably accurate as it defines the printbed position in the SCARA space.
+  // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
-  #define TPARA_OFFSET_X    0       // (mm)
+  #define TPARA_OFFSET_X    0     // (mm)
-  #define TPARA_OFFSET_Y    0       // (mm)
+  #define TPARA_OFFSET_Y    0     // (mm)
-  #define TPARA_OFFSET_Z    0       // (mm)
+  #define TPARA_OFFSET_Z    0     // (mm)
  #define FEEDRATE_SCALING        // Convert XY feedrate from mm/s to degrees/s on the fly
  // Radius around the center where the arm cannot reach
  #define MIDDLE_DEAD_ZONE_R   0  // (mm)
  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
  #define THETA_HOMING_OFFSET  0
  #define PSI_HOMING_OFFSET    0
 #endif
 // @section polar
@@ -1231,10 +1233,15 @@
 /**
 * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 40, 40, 200, 425 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }
 /**
 * Enable support for M92. Disable to save at least ~530 bytes of flash.
 */
 #define EDITABLE_STEPS_PER_UNIT
 /**
 * Default Max Feed Rate (linear=mm/s, rotational=°/s)
@@ -1254,7 +1261,7 @@
 * Override with M201
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_MAX_ACCELERATION      { 12000, 12000, 500, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }
 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1269,9 +1276,9 @@
 *   M204 R    Retract Acceleration
 *   M204 T    Travel Acceleration
 */
-#define DEFAULT_ACCELERATION          7000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   7000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 /**
 * Default Jerk limits (mm/s)
@@ -1286,6 +1293,7 @@
  #define DEFAULT_XJERK 10.0
  #define DEFAULT_YJERK 10.0
  #define DEFAULT_ZJERK  0.3
  #define DEFAULT_EJERK  5.0
  //#define DEFAULT_IJERK  0.3
  //#define DEFAULT_JJERK  0.3
  //#define DEFAULT_KJERK  0.3
@@ -1301,8 +1309,6 @@
  #endif
 #endif
 #define DEFAULT_EJERK    5.0  // May be used by Linear Advance
 /**
 * Junction Deviation Factor
 *
@@ -1324,7 +1330,7 @@
 *
 * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
 */
-#define S_CURVE_ACCELERATION
+//#define S_CURVE_ACCELERATION
 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1340,10 +1346,10 @@
 * The probe replaces the Z-MIN endstop and is used for Z homing.
 * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
 */
-//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
 // Force the use of the probe for Z-axis homing
-#define USE_PROBE_FOR_Z_HOMING
+//#define USE_PROBE_FOR_Z_HOMING
 /**
 * Z_MIN_PROBE_PIN
@@ -1400,7 +1406,7 @@
 /**
 * The BLTouch probe uses a Hall effect sensor and emulates a servo.
 */
-#define BLTOUCH
+//#define BLTOUCH
 /**
 * MagLev V4 probe by MDD
@@ -1442,6 +1448,17 @@
  //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point
 #endif
 /**
 * BIQU MicroProbe
 *
 * A lightweight, solenoid-driven probe.
 * For information about this sensor https://github.com/bigtreetech/MicroProbe
 *
 * Also requires: PROBE_ENABLE_DISABLE
 */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE
@@ -1630,7 +1647,7 @@
 * A total of 2 does fast/slow probes with a weighted average.
 * A total of 3 or more adds more slow probes, taking the average.
 */
-#define MULTIPLE_PROBING 2
+//#define MULTIPLE_PROBING 2
 //#define EXTRA_PROBING    1
 /**
@@ -1653,7 +1670,7 @@
 #define Z_PROBE_ERROR_TOLERANCE     3 // (mm) Tolerance for early trigger (<= -probe.offset.z + ZPET)
 //#define Z_AFTER_PROBING           5 // (mm) Z position after probing is done
-#define Z_PROBE_LOW_POINT          -5 // (mm) Farthest distance below the trigger-point to go before stopping
+#define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping
 // For M851 provide ranges for adjusting the X, Y, and Z probe offsets
 //#define PROBE_OFFSET_XMIN -50   // (mm)
@@ -1732,9 +1749,9 @@
 // @section motion
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR true
+#define INVERT_X_DIR false
-#define INVERT_Y_DIR false
+#define INVERT_Y_DIR true
-#define INVERT_Z_DIR true
+#define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
 //#define INVERT_J_DIR false
 //#define INVERT_K_DIR false
@@ -1804,8 +1821,8 @@
 // @section geometry
 // The size of the printable area
-#define X_BED_SIZE 1200
+#define X_BED_SIZE 200
-#define Y_BED_SIZE 1200
+#define Y_BED_SIZE 200
 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1813,7 +1830,7 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 1000
+#define Z_MAX_POS 200
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1865,7 +1882,7 @@
 #endif
 #if ANY(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-  #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 /**
@@ -2024,7 +2041,7 @@
 */
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
-#define AUTO_BED_LEVELING_BILINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
@@ -2032,14 +2049,14 @@
 * Commands to execute at the end of G29 probing.
 * Useful to retract or move the Z probe out of the way.
 */
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+//#define EVENT_GCODE_AFTER_G29 "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
 /**
 * Normally G28 leaves leveling disabled on completion. Enable one of
 * these options to restore the prior leveling state or to always enable
 * leveling immediately after G28.
 */
-#define RESTORE_LEVELING_AFTER_G28
+//#define RESTORE_LEVELING_AFTER_G28
 //#define ENABLE_LEVELING_AFTER_G28
 /**
@@ -2054,7 +2071,7 @@
 /**
 * Enable detailed logging of G28, G29, M48, etc.
 * Turn on with the command 'M111 S32'.
- * NOTE: Requires a lot of PROGMEM!
+ * NOTE: Requires a lot of flash!
 */
 //#define DEBUG_LEVELING_FEATURE
@@ -2071,7 +2088,7 @@
   */
  #define ENABLE_LEVELING_FADE_HEIGHT
  #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-    #define DEFAULT_LEVELING_FADE_HEIGHT 0.0 // (mm) Default fade height.
+    #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
  #endif
  /**
@@ -2085,7 +2102,7 @@
  /**
   * Enable the G26 Mesh Validation Pattern tool.
   */
-  #define G26_MESH_VALIDATION
+  //#define G26_MESH_VALIDATION
  #if ENABLED(G26_MESH_VALIDATION)
    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for G26.
@@ -2101,7 +2118,7 @@
 #if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
  // Set the number of grid points per dimension.
-  #define GRID_MAX_POINTS_X 15
+  #define GRID_MAX_POINTS_X 3
  #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
  // Probe along the Y axis, advancing X after each column
@@ -2111,7 +2128,7 @@
    // Beyond the probed grid, continue the implied tilt?
    // Default is to maintain the height of the nearest edge.
-    #define EXTRAPOLATE_BEYOND_GRID
+    //#define EXTRAPOLATE_BEYOND_GRID
    //
    // Subdivision of the grid by Catmull-Rom method.
@@ -2187,12 +2204,12 @@
 * Add a bed leveling sub-menu for ABL or MBL.
 * Include a guided procedure if manual probing is enabled.
 */
-#define LCD_BED_LEVELING
+//#define LCD_BED_LEVELING
 #if ENABLED(LCD_BED_LEVELING)
  #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
-  #define LCD_PROBE_Z_RANGE 8     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
+  #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif
 // Add a menu item to move between bed corners for manual bed adjustment
@@ -2254,7 +2271,7 @@
 * - Allows Z homing only when XY positions are known and trusted.
 * - If stepper drivers sleep, XY homing may be required again before Z homing.
 */
-#define Z_SAFE_HOMING
+//#define Z_SAFE_HOMING
 #if ENABLED(Z_SAFE_HOMING)
  #define Z_SAFE_HOMING_X_POINT X_CENTER  // (mm) X point for Z homing
@@ -2341,12 +2358,12 @@
 *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
 *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
 */
-#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
-#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
+#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
-  #define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
+  //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
  //#define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
 #endif
@@ -2404,11 +2421,11 @@
 *    P1  Raise the nozzle always to Z-park height.
 *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
 */
-#define NOZZLE_PARK_FEATURE
+//#define NOZZLE_PARK_FEATURE
 #if ENABLED(NOZZLE_PARK_FEATURE)
  // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
  #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
  #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
@@ -2619,9 +2636,9 @@
 #define DISPLAY_CHARSET_HD44780 JAPANESE
 /**
- * Info Screen Style (0:Classic, 1:Průša)
+ * Info Screen Style (0:Classic, 1:Průša, 2:CNC)
 *
- * :[0:'Classic', 1:'Průša']
+ * :[0:'Classic', 1:'Průša', 2:'CNC']
 */
 #define LCD_INFO_SCREEN_STYLE 0
@@ -2631,7 +2648,7 @@
 * SD Card support is disabled by default. If your controller has an SD slot,
 * you must uncomment the following option or it won't work.
 */
-#define SDSUPPORT
+//#define SDSUPPORT
 /**
 * SD CARD: ENABLE CRC
@@ -2711,7 +2728,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-#define INDIVIDUAL_AXIS_HOMING_MENU
+//#define INDIVIDUAL_AXIS_HOMING_MENU
 //#define INDIVIDUAL_AXIS_HOMING_SUBMENU
 //
@@ -2720,7 +2737,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-#define SPEAKER
+//#define SPEAKER
 //
 // The duration and frequency for the UI feedback sound.
@@ -2914,7 +2931,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 //
 // K.3D Full Graphic Smart Controller
@@ -3015,9 +3032,14 @@
 //
 //#define BTT_MINI_12864
 //
 // BEEZ MINI 12864 is an alias for FYSETC_MINI_12864_2_1. Type A/B. NeoPixel RGB Backlight.
 //
 //#define BEEZ_MINI_12864
 //
 // Factory display for Creality CR-10 / CR-7 / Ender-3
-// https://www.aliexpress.com/item/32833148327.html
+// https://marlinfw.org/docs/hardware/controllers.html#cr10_stockdisplay
 //
 // Connect to EXP1 on RAMPS and compatible boards.
 //
@@ -3394,7 +3416,6 @@
  #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus
  //#define DISABLE_ENCODER         // Disable the click encoder, if any
  //#define TOUCH_IDLE_SLEEP_MINS 5 // (minutes) Display Sleep after a period of inactivity. Set with M255 S.
  #define TOUCH_SCREEN_CALIBRATION
@@ -307,11 +307,11 @@
  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
-  #define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
+  //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
  #if ENABLED(ADAPTIVE_FAN_SLOWING)
    //#define REPORT_ADAPTIVE_FAN_SLOWING     // Report fan slowing activity to the console
    #if ANY(MPCTEMP, PIDTEMP)
-      #define TEMP_TUNING_MAINTAIN_FAN      // Don't slow down the fan speed during M303 or M306 T
+      //#define TEMP_TUNING_MAINTAIN_FAN      // Don't slow down the fan speed during M303 or M306 T
    #endif
  #endif
@@ -335,7 +335,7 @@
 * Thermal Protection parameters for the bed are just as above for hotends.
 */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD        90 // (seconds)
+  #define THERMAL_PROTECTION_BED_PERIOD        20 // (seconds)
  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // (°C)
  /**
@@ -459,7 +459,7 @@
      #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
    #else
-      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power loss due to cooling = Kf * (fan_speed)
+      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power-loss due to cooling = Kf * (fan_speed)
      #define DEFAULT_Kf 10                              // A constant value added to the PID-tuner
      #define PID_FAN_SCALING_MIN_SPEED 10               // Minimum fan speed at which to enable PID_FAN_SCALING
    #endif
@@ -547,10 +547,10 @@
 * Hotend Idle Timeout
 * Prevent filament in the nozzle from charring and causing a critical jam.
 */
-#define HOTEND_IDLE_TIMEOUT
+//#define HOTEND_IDLE_TIMEOUT
 #if ENABLED(HOTEND_IDLE_TIMEOUT)
-  #define HOTEND_IDLE_TIMEOUT_SEC (30*60)    // (seconds) Time without extruder movement to trigger protection
+  #define HOTEND_IDLE_TIMEOUT_SEC (5*60)    // (seconds) Time without extruder movement to trigger protection
-  #define HOTEND_IDLE_MIN_TRIGGER   170     // (°C) Minimum temperature to enable hotend protection
+  #define HOTEND_IDLE_MIN_TRIGGER   180     // (°C) Minimum temperature to enable hotend protection
  #define HOTEND_IDLE_NOZZLE_TARGET   0     // (°C) Safe temperature for the nozzle after timeout
  #define HOTEND_IDLE_BED_TARGET      0     // (°C) Safe temperature for the bed after timeout
 #endif
@@ -602,8 +602,8 @@
 * gets it spinning reliably for a short time before setting the requested speed.
 * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
 */
-#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_TIME  100  // (ms)
-#define FAN_KICKSTART_POWER 180  // 64-255
+//#define FAN_KICKSTART_POWER 180  // 64-255
 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1
@@ -931,7 +931,7 @@
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
 //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa
-#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -1020,7 +1020,7 @@
 * Z Steppers Auto-Alignment
 * Add the G34 command to align multiple Z steppers using a bed probe.
 */
-#define Z_STEPPER_AUTO_ALIGN
+//#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  /**
   * Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
@@ -1204,14 +1204,14 @@
 //#define INPUT_SHAPING_Y
 #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
  #if ENABLED(INPUT_SHAPING_X)
-    #define SHAPING_FREQ_X  40          // (Hz) The default dominant resonant frequency on the X axis.
+    #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
-    #define SHAPING_ZETA_X  0.15f       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
+    #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
  #endif
  #if ENABLED(INPUT_SHAPING_Y)
-    #define SHAPING_FREQ_Y  40          // (Hz) The default dominant resonant frequency on the Y axis.
+    #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
-    #define SHAPING_ZETA_Y  0.15f       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
+    #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
  #endif
-  //#define SHAPING_MIN_FREQ  20        // By default the minimum of the shaping frequencies. Override to affect SRAM usage.
+  //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
  //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
  //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.
 #endif
@@ -1270,18 +1270,18 @@
 * XY Frequency limit
 * Reduce resonance by limiting the frequency of small zigzag infill moves.
 * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
- * Use M201 F<freq> G<min%> to change limits at runtime.
+ * Use M201 F<freq> S<min%> to change limits at runtime.
 */
 //#define XY_FREQUENCY_LIMIT      10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
 #ifdef XY_FREQUENCY_LIMIT
-  #define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 G<min%>.
+  #define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 S<min%>.
 #endif
 //
 // Backlash Compensation
 // Adds extra movement to axes on direction-changes to account for backlash.
 //
-#define BACKLASH_COMPENSATION
+//#define BACKLASH_COMPENSATION
 #if ENABLED(BACKLASH_COMPENSATION)
  // Define values for backlash distance and correction.
  // If BACKLASH_GCODE is enabled these values are the defaults.
@@ -1296,7 +1296,7 @@
  //#define BACKLASH_SMOOTHING_MM 3 // (mm)
  // Add runtime configuration and tuning of backlash values (M425)
-  #define BACKLASH_GCODE
+  //#define BACKLASH_GCODE
  #if ENABLED(BACKLASH_GCODE)
    // Measure the Z backlash when probing (G29) and set with "M425 Z"
@@ -1342,7 +1342,7 @@
  #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
  #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // mm
-  // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
+  // Uncomment to enable reporting (required for "G425 V", but consumes flash).
  //#define CALIBRATION_REPORTING
  // The true location and dimension the cube/bolt/washer on the bed.
@@ -1474,6 +1474,7 @@
  #if IS_ULTIPANEL
    #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
    #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
    //#define ULTIPANEL_FLOWPERCENT // Encoder sets the flow percentage on the Status Screen
  #endif
 #endif
@@ -1528,7 +1529,7 @@
  #endif
  // Include a page of printer information in the LCD Main Menu
-  #define LCD_INFO_MENU
+  //#define LCD_INFO_MENU
  #if ENABLED(LCD_INFO_MENU)
    //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  #endif
@@ -1539,6 +1540,7 @@
   * Axis moves <= 1/2 the axis length and Extruder moves <= EXTRUDE_MAXLENGTH
   * will be shown in the move submenus.
   */
  #define MANUAL_MOVE_DISTANCE_MM                    10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM         100, 50, 10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM    500, 100, 50, 10, 1.0, 0.1  // (mm)
@@ -1580,7 +1582,7 @@
      #define BOOT_MARLIN_LOGO_SMALL      // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
    #endif
    #if HAS_MARLINUI_U8GLIB
-      #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
+      //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
    #endif
    #if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
      //#define SHOW_CUSTOM_BOOTSCREEN    // Show the bitmap in Marlin/_Bootscreen.h on startup.
@@ -1599,10 +1601,10 @@
  #endif
  // The timeout to return to the status screen from sub-menus
-  #define LCD_TIMEOUT_TO_STATUS 15000   // (ms)
+  //#define LCD_TIMEOUT_TO_STATUS 15000   // (ms)
  // Scroll a longer status message into view
-  #define STATUS_MESSAGE_SCROLLING
+  //#define STATUS_MESSAGE_SCROLLING
  // Apply a timeout to low-priority status messages
  //#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -1654,7 +1656,7 @@
 #endif
 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
-#define SET_PROGRESS_MANUALLY
+//#define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
@@ -1743,19 +1745,25 @@
   */
  //#define POWER_LOSS_RECOVERY
  #if ENABLED(POWER_LOSS_RECOVERY)
-    #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
+    #define PLR_ENABLED_DEFAULT       false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
-    //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
+    //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable)
-    //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
+
-    //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
+    //#define POWER_LOSS_PIN             44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default.
-    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
+    //#define POWER_LOSS_STATE         HIGH // State of pin indicating power-loss
-    //#define POWER_LOSS_PULLUP         // Set pullup / pulldown as appropriate for your sensor
+    //#define POWER_LOSS_PULLUP             // Set pullup / pulldown as appropriate for your sensor
    //#define POWER_LOSS_PULLDOWN
-    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
+
-    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
+    //#define POWER_LOSS_ZRAISE        2    // (mm) Z axis raise on resume (on power-loss with UPS)
    //#define POWER_LOSS_PURGE_LEN    20    // (mm) Length of filament to purge on resume
    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
    // especially with "vase mode" printing. Set too high and vases cannot be continued.
-    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
+    #define POWER_LOSS_MIN_Z_CHANGE    0.05 // (mm) Minimum Z change before saving power-loss data
    //#define BACKUP_POWER_SUPPLY           // Backup power / UPS to move the steppers on power-loss
    #if ENABLED(BACKUP_POWER_SUPPLY)
      //#define POWER_LOSS_RETRACT_LEN   10 // (mm) Length of filament to retract on fail
    #endif
    // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
    //#define POWER_LOSS_RECOVER_ZHOME
@@ -1805,13 +1813,13 @@
  // Allow international symbols in long filenames. To display correctly, the
  // LCD's font must contain the characters. Check your selected LCD language.
-  #define UTF_FILENAME_SUPPORT
+  //#define UTF_FILENAME_SUPPORT
-  #define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
  //#define M20_TIMESTAMP_SUPPORT         // Include timestamps by adding the 'T' flag to M20 commands
-  #define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)
@@ -1962,17 +1970,6 @@
  // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  //#define USE_SMALL_INFOFONT
  /**
   * Graphical Display Sleep
   *
   * The U8G library provides sleep / wake functions for SH1106, SSD1306,
   * SSD1309, and some other DOGM displays.
   * Enable this option to save energy and prevent OLED pixel burn-in.
   * Adds the menu item Configuration > LCD Timeout (m) to set a wait period
   * from 0 (disabled) to 99 minutes.
   */
  //#define DISPLAY_SLEEP_MINUTES 2  // (minutes) Timeout before turning off the screen. Set with M255 S.
  /**
   * ST7920-based LCDs can emulate a 16 x 4 character display using
   * the ST7920 character-generator for very fast screen updates.
@@ -2221,13 +2218,20 @@
  //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
 #endif
-//
+/**
-// LCD Backlight Timeout
+ * Display Sleep
-// Requires a display with a controllable backlight
+ * Enable this option to save energy and prevent OLED pixel burn-in.
-//
+ */
 //#define DISPLAY_SLEEP_MINUTES 2       // (minutes) Timeout before turning off the screen
 /**
 * LCD Backlight Timeout
 * Requires a display with a controllable backlight
 */
 //#define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight
 #if defined(DISPLAY_SLEEP_MINUTES) || defined(LCD_BACKLIGHT_TIMEOUT_MINS)
-  #define EDITABLE_DISPLAY_TIMEOUT      // Edit timeout with M255 S<minutes> and a menu item
+  #define EDITABLE_DISPLAY_TIMEOUT      // Edit sleep / backlight timeout with M255 S<minutes> and a menu item
 #endif
 //
@@ -2262,18 +2266,18 @@
 *
 * Warning: Does not respect endstops!
 */
-#define BABYSTEPPING
+//#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
  //#define EP_BABYSTEPPING                 // M293/M294 babystepping with EMERGENCY_PARSER support
  //#define BABYSTEP_WITHOUT_HOMING
-  #define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
+  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  //#define BABYSTEP_INVERT_Z               // Enable if Z babysteps should go the other way
  //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
-  #define BABYSTEP_MULTIPLICATOR_Z  25       // (steps or mm) Steps or millimeter distance for each Z babystep
+  #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
  #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep
-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
                                            // Note: Extra time may be added to mitigate controller latency.
@@ -2285,10 +2289,10 @@
  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28
-  #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
  #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    #define BABYSTEP_GFX_OVERLAY          // Enable graphical overlay on Z-offset editor
+    //#define BABYSTEP_GFX_OVERLAY          // Enable graphical overlay on Z-offset editor
  #endif
 #endif
@@ -2309,7 +2313,7 @@
 *
 * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
 */
-#define LIN_ADVANCE
+//#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
  #if ENABLED(DISTINCT_E_FACTORS)
    #define ADVANCE_K { 0.22 }    // (mm) Compression length per 1mm/s extruder speed, per extruder
@@ -2318,7 +2322,6 @@
  #endif
  //#define ADVANCE_K_EXTRA       // Add a second linear advance constant, configurable with M900 L.
  //#define LA_DEBUG              // Print debug information to serial during operation. Disable for production use.
  #define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
  //#define EXPERIMENTAL_I2S_LA   // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
 #endif
@@ -2503,7 +2506,7 @@
 #endif
 // G5 Bézier Curve Support with XYZE destination and IJPQ offsets
-#define BEZIER_CURVE_SUPPORT        // Requires ~2666 bytes
+//#define BEZIER_CURVE_SUPPORT        // Requires ~2666 bytes
 #if ANY(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
  //#define CNC_WORKSPACE_PLANES      // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
@@ -2595,16 +2598,16 @@
 #if ALL(HAS_MEDIA, DIRECT_STEPPING)
  #define BLOCK_BUFFER_SIZE  8
 #elif HAS_MEDIA
-  #define BLOCK_BUFFER_SIZE 32
+  #define BLOCK_BUFFER_SIZE 16
 #else
-  #define BLOCK_BUFFER_SIZE 32
+  #define BLOCK_BUFFER_SIZE 16
 #endif
 // @section serial
 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 96
-#define BUFSIZE 16
+#define BUFSIZE 4
 // Transmission to Host Buffer Size
 // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@@ -2651,7 +2654,7 @@
 * Currently handles M108, M112, M410, M876
 * NOTE: Not yet implemented for all platforms.
 */
-#define EMERGENCY_PARSER
+//#define EMERGENCY_PARSER
 /**
 * Realtime Reporting (requires EMERGENCY_PARSER)
@@ -2682,7 +2685,7 @@
 //#define NO_TIMEOUTS 1000 // (ms)
 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
-#define ADVANCED_OK
+//#define ADVANCED_OK
 // Printrun may have trouble receiving long strings all at once.
 // This option inserts short delays between lines of serial output.
@@ -2884,7 +2887,7 @@
 *
 * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
 */
-#define ADVANCED_PAUSE_FEATURE
+//#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
@@ -2924,11 +2927,12 @@
  //#define FILAMENT_CHANGE_RESUME_ON_INSERT      // Automatically continue / load filament when runout sensor is triggered again.
  //#define PAUSE_REHEAT_FAST_RESUME              // Reduce number of waits by not prompting again post-timeout before continuing.
-  #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
  //#define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change
-  #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
-  #define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  #define CONFIGURE_FILAMENT_CHANGE               // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
 #endif
 // @section tmc_smart
@@ -2949,15 +2953,12 @@
 *    Some boards have simple jumper connections! See your board's documentation.
 *  - These drivers can also be used with Hardware Serial.
 *
 * The TMC26XStepper library is required for TMC26X stepper drivers.
 *   https://github.com/MarlinFirmware/TMC26XStepper
 *
 * The TMCStepper library is required for other TMC stepper drivers.
 *   https://github.com/teemuatlut/TMCStepper
 *
 * @section tmc/config
 */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG
  #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
@@ -2971,7 +2972,7 @@
    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
    #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
    #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
    //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
    //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3108,7 +3109,7 @@
  #endif
  #if AXIS_IS_TMC_CONFIG(E0)
-    #define E0_CURRENT      900
+    #define E0_CURRENT      800
    #define E0_MICROSTEPS    16
    #define E0_RSENSE         0.11
    #define E0_CHAIN_POS     -1
@@ -3281,7 +3282,7 @@
    #define STEALTHCHOP_U
    #define STEALTHCHOP_V
    #define STEALTHCHOP_W
-    //#define STEALTHCHOP_E
+    #define STEALTHCHOP_E
  #endif
  /**
@@ -3299,7 +3300,7 @@
   * Define your own with:
   * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
   */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V        // All axes (override below)
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
@@ -3443,7 +3444,7 @@
  /**
   * Step on both rising and falling edge signals (as with a square wave).
   */
-  #define EDGE_STEPPING
+  //#define EDGE_STEPPING
  /**
   * Enable M122 debugging command for TMC stepper drivers.
@@ -3464,7 +3465,7 @@
   */
  #define TMC_ADV() {  }
-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG
 // @section i2cbus
@@ -3557,7 +3558,7 @@
 * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
 * to set spindle speed, spindle direction, and laser power.
 *
- * SuperPid is a router/spindle speed controller used in the CNC milling community.
+ * SuperPID is a router/spindle speed controller used in the CNC milling community.
 * Marlin can be used to turn the spindle on and off. It can also be used to set
 * the spindle speed from 5,000 to 30,000 RPM.
 *
@@ -3835,38 +3836,6 @@
 */
 //#define CNC_COORDINATE_SYSTEMS
 // @section reporting
 /**
 * Auto-report fan speed with M123 S<seconds>
 * Requires fans with tachometer pins
 */
 //#define AUTO_REPORT_FANS
 /**
 * Auto-report temperatures with M155 S<seconds>
 */
 #define AUTO_REPORT_TEMPERATURES
 #if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
 #endif
 /**
 * Auto-report position with M154 S<seconds>
 */
 #define AUTO_REPORT_POSITION
 #if ENABLED(AUTO_REPORT_POSITION)
  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
 #endif
 /**
 * Include capabilities in M115 output
 */
 #define EXTENDED_CAPABILITIES_REPORT
 #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
  //#define M115_GEOMETRY_REPORT
 #endif
 // @section security
 /**
@@ -3909,13 +3878,50 @@
 // @section reporting
-// Extra options for the M114 "Current Position" report
+/**
 * Extra options for the M114 "Current Position" report
 */
 //#define M114_DETAIL         // Use 'M114` for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
 /**
 * Auto-report fan speed with M123 S<seconds>
 * Requires fans with tachometer pins
 */
 //#define AUTO_REPORT_FANS
 //#define REPORT_FAN_CHANGE   // Report the new fan speed when changed by M106 (and others)
 /**
 * Auto-report temperatures with M155 S<seconds>
 */
 #define AUTO_REPORT_TEMPERATURES
 #if ENABLED(AUTO_REPORT_TEMPERATURES) && TEMP_SENSOR_REDUNDANT
  //#define AUTO_REPORT_REDUNDANT // Include the "R" sensor in the auto-report
 #endif
 /**
 * Auto-report position with M154 S<seconds>
 */
 //#define AUTO_REPORT_POSITION
 #if ENABLED(AUTO_REPORT_POSITION)
  //#define AUTO_REPORT_REAL_POSITION // Auto-report the real position
 #endif
 /**
 * M115 - Report capabilites. Disable to save ~1150 bytes of flash.
 *        Some hosts (and serial TFT displays) rely on this feature.
 */
 #define CAPABILITIES_REPORT
 #if ENABLED(CAPABILITIES_REPORT)
  // Include capabilities in M115 output
  #define EXTENDED_CAPABILITIES_REPORT
  #if ENABLED(EXTENDED_CAPABILITIES_REPORT)
    //#define M115_GEOMETRY_REPORT
  #endif
 #endif
 // @section gcode
 /**
@@ -3927,7 +3933,9 @@
  //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif
-// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
+/**
 * Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
 */
 //#define MEATPACK_ON_SERIAL_PORT_1
 //#define MEATPACK_ON_SERIAL_PORT_2
@@ -3935,6 +3943,12 @@
 //#define REPETIER_GCODE_M360     // Add commands originally from Repetier FW
 /**
 * Enable M111 debug flags 1=ECHO, 2=INFO, 4=ERRORS (unimplemented).
 * Disable to save some flash. Some hosts (Repetier Host) may rely on this feature.
 */
 #define DEBUG_FLAGS_GCODE
 /**
 * Enable this option for a leaner build of Marlin that removes
 * workspace offsets to slightly optimize performance.
@@ -3962,8 +3976,6 @@
  //#define VARIABLE_G0_FEEDRATE // The G0 feedrate is set by F in G0 motion mode
 #endif
 // @section gcode
 /**
 * Startup commands
 *
@@ -4101,14 +4113,14 @@
 * Host Prompt Support enables Marlin to use the host for user prompts so
 * filament runout and other processes can be managed from the host side.
 */
-#define HOST_ACTION_COMMANDS
+//#define HOST_ACTION_COMMANDS
 #if ENABLED(HOST_ACTION_COMMANDS)
  //#define HOST_PAUSE_M76                // Tell the host to pause in response to M76
-  #define HOST_PROMPT_SUPPORT           // Initiate host prompts to get user feedback
+  //#define HOST_PROMPT_SUPPORT           // Initiate host prompts to get user feedback
  #if ENABLED(HOST_PROMPT_SUPPORT)
-    #define HOST_STATUS_NOTIFICATIONS   // Send some status messages to the host as notifications
+    //#define HOST_STATUS_NOTIFICATIONS   // Send some status messages to the host as notifications
  #endif
-  #define HOST_START_MENU_ITEM          // Add a menu item that tells the host to start
+  //#define HOST_START_MENU_ITEM          // Add a menu item that tells the host to start
  //#define HOST_SHUTDOWN_MENU_ITEM       // Add a menu item that tells the host to shut down
 #endif
@@ -4296,6 +4308,7 @@
                                          // See class CodeProfiler.
  //#define MAX7219_DEBUG_MULTISTEPPING 6 // Show multi-stepping 1 to 128 on this LED matrix row.
  //#define MAX7219_DEBUG_SLOWDOWN      6 // Count (mod 16) how many times SLOWDOWN has reduced print speed.
  //#define MAX7219_REINIT_ON_POWERUP     // Re-initialize MAX7129 when power supply turns on
 #endif
 /**
@@ -4476,12 +4489,12 @@
 //
 // M42 - Set pin states
 //
-#define DIRECT_PIN_CONTROL
+//#define DIRECT_PIN_CONTROL
 //
 // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
 //
-#define PINS_DEBUGGING
+//#define PINS_DEBUGGING
 // Enable Tests that will run at startup and produce a report
 //#define MARLIN_TEST_BUILD
@@ -4512,3 +4525,6 @@
 // Report uncleaned reset reason from register r2 instead of MCUSR. Supported by Optiboot on AVR.
 //#define OPTIBOOT_RESET_REASON
 // Shrink the build for smaller boards by sacrificing some serial feedback
 //#define MARLIN_SMALL_BUILD
@@ -2,7 +2,7 @@
  Marlin Firmware
-  (c) 2011-2023 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
  Portions of Marlin are (c) by their respective authors.
  All code complies with GPLv2 and/or GPLv3
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-01-01"
+//#define STRING_DISTRIBUTION_DATE "2024-04-07"
 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -81,6 +81,12 @@ void MarlinHAL::init() {
  #if HAS_SERVO_3
    OUT_WRITE(SERVO3_PIN, LOW);
  #endif
  #if HAS_SERVO_4
    OUT_WRITE(SERVO4_PIN, LOW);
  #endif
  #if HAS_SERVO_5
    OUT_WRITE(SERVO5_PIN, LOW);
  #endif
  init_pwm_timers();   // Init user timers to default frequency - 1000HZ
@@ -119,7 +119,6 @@ void spiBegin() {
    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
  }
  /** begin spi transaction */
  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
    // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
    SPSR = clockDiv | 0x01;
  }
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI
  // ------------------------
@@ -63,7 +63,6 @@
 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)
 /************ static functions common to all instances ***********************/
 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {
@@ -35,14 +35,14 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
@@ -61,7 +61,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }
 #endif
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
  if (digitalPinHasPCICR(pin)) {
@@ -679,7 +679,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF
 /**
 * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
 * do not function the same as the other Arduino extensions.
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -163,7 +163,6 @@ bool pwm_status(uint8_t pin) {
  SERIAL_ECHO_SP(2);
 } // pwm_status
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
    { &TCCR0A, &TCCR0B, &TIMSK0 },
    { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -181,7 +180,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
  #endif
 };
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
  #ifdef TIMER0A
@@ -217,7 +215,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
  #endif
 };
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])
@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  U8G_ATOMIC_END();
 }
 #if ENABLED(FYSETC_MINI_12864)
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else
@@ -42,7 +42,7 @@
 // Public functions
 // ------------------------
-#if ANY(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
+#if ANY(SOFTWARE_SPI, FORCE_SOFT_SPI)
  // ------------------------
  // Software SPI
@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
  }
 }
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
@@ -958,14 +958,14 @@ static void ee_Init() {
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { ee_Init();  return true; }
 bool PersistentStore::access_finish() { ee_Flush(); return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      ee_Write(uint32_t(p), v);
@@ -984,7 +984,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = ee_Read(uint32_t(pos));
+    uint8_t c = ee_Read(uint32_t(REAL_EEPROM_ADDR(pos)));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -36,14 +36,14 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
@@ -62,7 +62,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;
 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                        PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                        PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \
@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
  { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
  { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53
  // 54 .. 65 - Analog pins
  // ----------------------
  { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -72,10 +72,10 @@
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
    #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #elif ENABLED(SOFTWARE_SPI)
    #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
  #endif
 #endif
@@ -48,7 +48,7 @@
  #define SD_MOSI_PIN       75
 #else
  // defaults
-  #define DUE_SOFTWARE_SPI
+  #define SOFTWARE_SPI
  #ifndef SD_SCK_PIN
    #define SD_SCK_PIN      52
  #endif
@@ -0,0 +1,29 @@
 # USB Files Source Documentation
 ## Source
 We sourced the USB files in Marlin from the Atmel ASF (Advanced Software Framework). The framework provides a variety of examples which were utilized in this project.
 Atmel doesn't provide these files in a source repository but they can be extracted from ASF, which can be downloaded from Atmel.
 [Advanced Software Framework](https://www.microchip.com/en-us/tools-resources/develop/libraries/advanced-software-framework)
 ## Modifications
 The files are mostly unmodified except for minor cosmetic changes but some more significant changes were needed.
 The changes that prompted the addition of this README file are listed below. Other changes may have been made prior to this.
 1. Modified `uotghs_device_due.c` to resolve race conditions that could leave interrupts asserted when freezing the peripheral clock, resulting in hangs and watchdog resets due to the ensuing interrupt storm.
 ## Version Information
 We don't know the exact version of ASF used as the source. However, the copyright information in the files indicates they are from 2015.
 ## Upgrade Considerations
 We looked at the ASF 3.52.0 files released in 2022 but saw no immediate benefits to justify an upgrade. It's important to note that the files in Marlin don't follow the same folder structure as the files in ASF, which complicates the process of comparing and applying updated files.
 When these files are updated it's important to carefully compare them to Marlin's versions so any improvements in the Marlin sources are brought forward.
 It would be best to make Marlin's directory structure align with ASF or at least document the source of each file to ease future updates.
@@ -142,7 +142,6 @@
 */
 #define COMPILER_PACK_RESET()          COMPILER_PRAGMA(pack())
 /**
 * \brief Set aligned boundary.
 */
@@ -283,7 +282,6 @@ typedef double                  F64;  //!< 64-bit floating-point number.
 typedef uint32_t                iram_size_t;
 //! @}
 /*! \name Status Types
 */
 //! @{
@@ -291,7 +289,6 @@ typedef bool                Status_bool_t;  //!< Boolean status.
 typedef U8                  Status_t;       //!< 8-bit-coded status.
 //! @}
 /*! \name Aliasing Aggregate Types
 */
 //! @{
@@ -462,7 +459,6 @@ typedef struct
 #endif
 //! @}
 #ifndef __ASSEMBLY__ // not for assembling.
 //! \name Optimization Control
@@ -581,7 +577,6 @@ typedef struct
 //! @}
 /*! \name Zero-Bit Counting
 *
 * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
@@ -692,7 +687,6 @@ typedef struct
 //! @}
 /*! \name Bit Reversing
 */
 //! @{
@@ -732,7 +726,6 @@ typedef struct
 //! @}
 /*! \name Alignment
 */
 //! @{
@@ -798,7 +791,6 @@ typedef struct
 */
 #define Long_call(addr)                   ((*(void (*)(void))(addr))())
 /*! \name MCU Endianism Handling
 * ARM is MCU little endianism.
 */
@@ -868,7 +860,6 @@ typedef struct
 #define  CPU_TO_BE32(x) swap32(x)
 //! @}
 /*! \name Endianism Conversion
 *
 * The same considerations as for clz and ctz apply here but GCC's
@@ -955,7 +946,6 @@ typedef struct
 //! @}
 /*! \name Target Abstraction
 */
 //! @{
@@ -997,7 +987,6 @@ typedef U8                  Byte;       //!< 8-bit unsigned integer.
 #endif  // #ifndef __ASSEMBLY__
 #ifdef __ICCARM__
 #define SHORTENUM           __packed
 #elif defined(__GNUC__)
@@ -81,7 +81,6 @@
 #define LUN_0_NAME                              "\"SD/MMC Card\""
 //! @}
 /*! \name Actions Associated with Memory Accesses
 *
 * Write here the action to associate with each memory access.
@@ -112,5 +111,4 @@
 #define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
 //! @}
 #endif // _CONF_ACCESS_H_
@@ -96,5 +96,4 @@
 // - UPLL frequency: 480MHz
 // - USB clock: 480 / 1 = 480MHz
 #endif /* CONF_CLOCK_H_INCLUDED */
@@ -88,7 +88,6 @@
 #endif
 //@}
 /**
 * USB Device Callbacks definitions (Optional)
 * @{
@@ -150,7 +149,6 @@
 //@}
 /**
 * USB Interface Configuration
 * @{
@@ -210,7 +208,6 @@
  //@}
  //@}
  /**
   * Configuration of MSC interface
   * @{
@@ -245,7 +242,6 @@
  //@}
  /**
   * Description of Composite Device
   * @{
@@ -68,7 +68,6 @@
 #endif
 #include "ctrl_access.h"
 //_____ D E F I N I T I O N S ______________________________________________
 #ifdef FREERTOS_USED
@@ -112,7 +111,6 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;
 #endif  // FREERTOS_USED
 #if MAX_LUN
 /*! \brief Initializes an entry of the LUN descriptor table.
@@ -242,17 +240,14 @@ static const struct
 #endif
 #if GLOBAL_WR_PROTECT == true
 bool g_wr_protect;
 #endif
 /*! \name Control Interface
 */
 //! @{
 #ifdef FREERTOS_USED
 bool ctrl_access_init(void)
@@ -270,7 +265,6 @@ bool ctrl_access_init(void)
  return true;
 }
 /*! \brief Locks accesses to LUNs.
 *
 * \return \c true if the access was successfully locked, else \c false.
@@ -288,7 +282,6 @@ static bool ctrl_access_lock(void)
 #endif  // FREERTOS_USED
 U8 get_nb_lun(void)
 {
 #if MEM_USB == ENABLE
@@ -309,13 +302,11 @@ U8 get_nb_lun(void)
 #endif
 }
 U8 get_cur_lun(void)
 {
  return LUN_ID_0;
 }
 Ctrl_status mem_test_unit_ready(U8 lun)
 {
  Ctrl_status status;
@@ -337,7 +328,6 @@ Ctrl_status mem_test_unit_ready(U8 lun)
  return status;
 }
 Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
 {
  Ctrl_status status;
@@ -359,7 +349,6 @@ Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
  return status;
 }
 U8 mem_sector_size(U8 lun)
 {
  U8 sector_size;
@@ -381,7 +370,6 @@ U8 mem_sector_size(U8 lun)
  return sector_size;
 }
 bool mem_unload(U8 lun, bool unload)
 {
  bool unloaded;
@@ -433,7 +421,6 @@ bool mem_wr_protect(U8 lun)
  return wr_protect;
 }
 bool mem_removal(U8 lun)
 {
  bool removal;
@@ -458,7 +445,6 @@ bool mem_removal(U8 lun)
  return removal;
 }
 const char *mem_name(U8 lun)
 {
 #if MAX_LUN==0
@@ -475,17 +461,14 @@ const char *mem_name(U8 lun)
 #endif
 }
 //! @}
 #if ACCESS_USB == true
 /*! \name MEM <-> USB Interface
 */
 //! @{
 Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
 {
  Ctrl_status status;
@@ -505,7 +488,6 @@ Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
  return status;
 }
 Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
 {
  Ctrl_status status;
@@ -525,19 +507,16 @@ Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
  return status;
 }
 //! @}
 #endif  // ACCESS_USB == true
 #if ACCESS_MEM_TO_RAM == true
 /*! \name MEM <-> RAM Interface
 */
 //! @{
 Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
 {
  Ctrl_status status;
@@ -564,7 +543,6 @@ Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
  return status;
 }
 Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
 {
  Ctrl_status status;
@@ -591,19 +569,16 @@ Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
  return status;
 }
 //! @}
 #endif  // ACCESS_MEM_TO_RAM == true
 #if ACCESS_STREAM == true
 /*! \name Streaming MEM <-> MEM Interface
 */
 //! @{
  #if ACCESS_MEM_TO_MEM == true
 #include "fat.h"
@@ -625,21 +600,18 @@ Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_ad
  #endif  // ACCESS_MEM_TO_MEM == true
 Ctrl_status stream_state(U8 id)
 {
  UNUSED(id);
  return CTRL_GOOD;
 }
 U16 stream_stop(U8 id)
 {
  UNUSED(id);
  return 0;
 }
 //! @}
 #endif // ACCESS_STREAM
@@ -56,7 +56,6 @@
 * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */
 #ifndef _CTRL_ACCESS_H_
 #define _CTRL_ACCESS_H_
@@ -89,7 +88,6 @@ typedef enum
  CTRL_BUSY       = FAIL + 2  //!< Memory not initialized or changed.
 } Ctrl_status;
 // FYI: Each Logical Unit Number (LUN) corresponds to a memory.
 // Check LUN defines.
@@ -136,7 +134,6 @@ typedef enum
 #define LUN_ID_USB      (MAX_LUN)           //!< First dynamic LUN (USB host mass storage).
 //! @}
 // Include LUN header files.
 #if LUN_0 == ENABLE
  #include LUN_0_INCLUDE
@@ -166,13 +163,11 @@ typedef enum
  #include LUN_USB_INCLUDE
 #endif
 // Check the configuration of write protection in conf_access.h.
 #ifndef GLOBAL_WR_PROTECT
  #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
 #endif
 #if GLOBAL_WR_PROTECT == true
 //! Write protect.
@@ -180,7 +175,6 @@ extern bool g_wr_protect;
 #endif
 /*! \name Control Interface
 */
 //! @{
@@ -279,7 +273,6 @@ extern const char *mem_name(U8 lun);
 //! @}
 #if ACCESS_USB == true
 /*! \name MEM <-> USB Interface
@@ -310,7 +303,6 @@ extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);
 #endif  // ACCESS_USB == true
 #if ACCESS_MEM_TO_RAM == true
 /*! \name MEM <-> RAM Interface
@@ -341,7 +333,6 @@ extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);
 #endif  // ACCESS_MEM_TO_RAM == true
 #if ACCESS_STREAM == true
 /*! \name Streaming MEM <-> MEM Interface
@@ -57,7 +57,6 @@
 #include "preprocessor.h"
 //! Maximal number of repetitions supported by MREPEAT.
 #define MREPEAT_LIMIT   256
@@ -128,7 +128,6 @@ static inline void osc_enable(uint32_t ul_id) {
    pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
    break;
  case OSC_MAINCK_4M_RC:
    pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
    break;
@@ -141,7 +140,6 @@ static inline void osc_enable(uint32_t ul_id) {
    pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
    break;
  case OSC_MAINCK_XTAL:
    pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
      pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
@@ -51,5 +51,4 @@
 #include "stringz.h"
 #include "mrepeat.h"
 #endif  // _PREPROCESSOR_H_
@@ -86,7 +86,6 @@ enum scsi_sbc_mode {
  SCSI_MS_MODE_CACHING = 0x08,    //!< Caching mode page
 };
 //! \name SBC-2 Device-Specific Parameter
 //@{
 #define SCSI_MS_SBC_WP              0x80    //!< Write Protected
@@ -45,7 +45,6 @@
 * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */
 #ifndef _SD_MMC_SPI_MEM_H_
 #define _SD_MMC_SPI_MEM_H_
@@ -63,17 +62,14 @@
  #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
 #endif
 #include "ctrl_access.h"
 //_____ D E F I N I T I O N S ______________________________________________
 #define   SD_MMC_REMOVED       0
 #define   SD_MMC_INSERTED      1
 #define   SD_MMC_REMOVING      2
 //---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
@@ -133,7 +129,6 @@ extern bool           sd_mmc_spi_wr_protect(void);
 //!
 extern bool           sd_mmc_spi_removal(void);
 //---- ACCESS DATA FUNCTIONS ----
 #if ACCESS_USB == true
@@ -212,7 +212,6 @@ extern "C" {
  #define CONFIG_USBCLK_DIV
 #endif
 extern void sysclk_enable_usb(void);
 extern void sysclk_disable_usb(void);
@@ -83,7 +83,6 @@ static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;
 //! @}
 //! \name Internal structure to store the USB device main strings
 //! @{
@@ -685,6 +685,4 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
   } \endcode
 */
 #endif // _UDC_H_
@@ -213,7 +213,6 @@ void udd_send_remotewakeup(void);
 */
 void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );
 /**
 * \name Endpoint Management
 *
@@ -457,7 +457,6 @@ void udi_cdc_data_sof_notify(void)
 #endif
 }
 // ------------------------
 //------- Internal routines to control serial line
@@ -520,7 +519,6 @@ static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
 	udi_cdc_ctrl_state_notify(port, ep_comm);
 }
 static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 {
 #if UDI_CDC_PORT_NB == 1 // To optimize code
@@ -542,7 +540,6 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 	}
 }
 static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -578,11 +575,9 @@ static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n,
 	udi_cdc_ctrl_state_notify(port, ep);
 }
 // ------------------------
 //------- Internal routines to process data transfer
 static bool udi_cdc_rx_start(uint8_t port)
 {
 	irqflags_t flags;
@@ -632,7 +627,6 @@ static bool udi_cdc_rx_start(uint8_t port)
 			udi_cdc_data_received);
 }
 static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t buf_sel_trans;
@@ -668,7 +662,6 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
 	udi_cdc_rx_start(port);
 }
 static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -700,7 +693,6 @@ static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t
 	udi_cdc_tx_send(port);
 }
 static void udi_cdc_tx_send(uint8_t port)
 {
 	irqflags_t flags;
@@ -780,11 +772,9 @@ static void udi_cdc_tx_send(uint8_t port)
 			udi_cdc_data_sent);
 }
 // ------------------------
 //------- Application interface
 //------- Application interface
 void udi_cdc_ctrl_signal_dcd(bool b_set)
@@ -106,7 +106,6 @@ typedef struct {
  usb_ep_desc_t ep_notify;
 } udi_cdc_comm_desc_t;
 /**
 * \brief Data Class interface descriptor
 *
@@ -121,7 +120,6 @@ typedef struct {
  usb_ep_desc_t ep_out;
 } udi_cdc_data_desc_t;
 //! CDC communication endpoints size for all speeds
 #define UDI_CDC_COMM_EP_SIZE        64
 //! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)
@@ -109,7 +109,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
  .bNumConfigurations = 1
 };
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -93,7 +93,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
  .bNumConfigurations        = 1
 };
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -147,7 +146,6 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
 };
 #endif
 /**
 * \name UDC structures which contains all USB Device definitions
 */
@@ -86,7 +86,6 @@ UDC_DESC_STORAGE udi_api_t udi_api_msc = {
 };
 //@}
 /**
 * \ingroup udi_msc_group
 * \defgroup udi_msc_group_internal Implementation of UDI MSC
@@ -137,7 +136,6 @@ volatile bool udi_msc_b_reset_trans = true;
 //@}
 /**
 * \name Internal routines
 */
@@ -190,7 +188,6 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
 static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
 //@}
 /**
 * \name Routines to process small data packet
 */
@@ -217,7 +214,6 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
 //@}
 /**
 * \name Routines to process CSW packet
 */
@@ -250,7 +246,6 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
 //@}
 /**
 * \name Routines manage sense data
 */
@@ -307,7 +302,6 @@ static void udi_msc_sense_fail_cdb_invalid(void);
 static void udi_msc_sense_command_invalid(void);
 //@}
 /**
 * \name Routines manage SCSI Commands
 */
@@ -116,6 +116,23 @@
 //#define dbg_print printf
 #define dbg_print(...)
 // Marlin modification: Redefine the otg_freeze_clock and otg_unfreeze_clock macros
 // to add memory barriers to ensure that any accesses to USB registers aren't re-ordered
 // to occur while the clock is frozen.
 #undef otg_freeze_clock
 #undef otg_unfreeze_clock
 #define otg_freeze_clock() do { \
 	__DSB(); \
 	Set_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK); \
 } while (0)
 #define otg_unfreeze_clock() \
 do { \
 	Clr_bits(UOTGHS->UOTGHS_CTRL, UOTGHS_CTRL_FRZCLK); \
 	__DSB(); \
 } while (0)
 /**
 * \ingroup udd_group
 * \defgroup udd_udphs_group USB On-The-Go High-Speed Port for device mode (UOTGHS)
@@ -276,7 +293,6 @@
 # endif
 #endif
 /**
 * \name Power management routine.
 */
@@ -293,7 +309,6 @@ static bool udd_b_idle;
 //! State of sleep manager
 static bool udd_b_sleep_initialized = false;
 /*! \brief Authorize or not the CPU powerdown mode
 *
 * \param b_enable true to authorize idle mode
@@ -321,7 +336,6 @@ static void udd_sleep_mode(bool b_idle)
 //@}
 /**
 * \name Control endpoint low level management routine.
 *
@@ -393,7 +407,6 @@ static void udd_ctrl_send_zlp_out(void);
 //! \brief Call callback associated to setup request
 static void udd_ctrl_endofrequest(void);
 /**
 * \brief Main interrupt routine for control endpoint
 *
@@ -405,7 +418,6 @@ static bool udd_ctrl_interrupt(void);
 //@}
 /**
 * \name Management of bulk/interrupt/isochronous endpoints
 *
@@ -443,7 +455,6 @@ typedef struct {
 	uint8_t stall_requested:1;
 } udd_ep_job_t;
 //! Array to register a job on bulk/interrupt/isochronous endpoint
 static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];
@@ -505,7 +516,6 @@ static bool udd_ep_interrupt(void);
 #endif // (0!=USB_DEVICE_MAX_EP)
 //@}
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS
@@ -611,6 +621,18 @@ ISR(UDD_USB_INT_FUN)
 		// The wakeup interrupt is automatic acked when a suspend occur
 		udd_disable_wake_up_interrupt();
 		udd_enable_suspend_interrupt();
 		// Marlin modification: The RESET, SOF, and MSOF interrupts were previously
 		// enabled in udd_attach, which caused a race condition where they could
 		// be raised and unclearable with the clock is frozen. They are now
 		// enabled here, after the clock has been unfrozen in response to the wake
 		// interrupt.
 		udd_enable_reset_interrupt();
 		udd_enable_sof_interrupt();
 #ifdef USB_DEVICE_HS_SUPPORT
 		udd_enable_msof_interrupt();
 #endif
 		udd_sleep_mode(true); // Enter in IDLE mode
 #ifdef UDC_RESUME_EVENT
 		UDC_RESUME_EVENT();
@@ -642,13 +664,11 @@ udd_interrupt_sof_end:
 	return;
 }
 bool udd_include_vbus_monitoring(void)
 {
 	return true;
 }
 void udd_enable(void)
 {
 	irqflags_t flags;
@@ -735,7 +755,6 @@ void udd_enable(void)
 	cpu_irq_restore(flags);
 }
 void udd_disable(void)
 {
 	irqflags_t flags;
@@ -776,6 +795,27 @@ void udd_disable(void)
 	cpu_irq_restore(flags);
 }
 // Marlin modification: The original implementation did not use a memory
 // barrier between disabling and clearing interrupts. This sometimes
 // allowed interrupts to remain raised and unclearable after the clock
 // was frozen. This helper was added to ensure that memory barriers
 // are used consistently from all places where interrupts are disabled.
 static void disable_and_ack_sync_interrupts()
 {
 	// Disable USB line events
 	udd_disable_reset_interrupt();
 	udd_disable_sof_interrupt();
 #ifdef USB_DEVICE_HS_SUPPORT
 	udd_disable_msof_interrupt();
 #endif
 	__DSB();
 	udd_ack_reset();
 	udd_ack_sof();
 #ifdef USB_DEVICE_HS_SUPPORT
 	udd_ack_msof();
 #endif
 	__DSB();
 }
 void udd_attach(void)
 {
@@ -796,17 +836,16 @@ void udd_attach(void)
 	udd_attach_device();
 	// Enable USB line events
 	udd_enable_reset_interrupt();
 	udd_enable_suspend_interrupt();
 	udd_enable_wake_up_interrupt();
-	udd_enable_sof_interrupt();
+
-#ifdef USB_DEVICE_HS_SUPPORT
+	// Marlin modification: The RESET, SOF, and MSOF interrupts were previously
-	udd_enable_msof_interrupt();
+	// enabled here, which caused a race condition where they could be raised
-#endif
+	// and unclearable with the clock is frozen. They are now enabled in the
-	// Reset following interrupts flag
+	// wake interrupt handler, after the clock has been unfrozen. They are now
-	udd_ack_reset();
+	// explicitly disabled here to ensure that they cannot be raised before
-	udd_ack_sof();
+	// the clock is frozen.
-	udd_ack_msof();
+	disable_and_ack_sync_interrupts();
 	// The first suspend interrupt must be forced
 	// The first suspend interrupt is not detected else raise it
@@ -817,18 +856,22 @@ void udd_attach(void)
 	cpu_irq_restore(flags);
 }
 void udd_detach(void)
 {
 	otg_unfreeze_clock();
 	// Detach device from the bus
 	udd_detach_device();
 	// Marlin modification: Added the explicit disabling of the RESET, SOF, and
 	// MSOF interrupts here, to ensure that they cannot be raised after the
 	// clock is frozen.
 	disable_and_ack_sync_interrupts();
 	otg_freeze_clock();
 	udd_sleep_mode(false);
 }
 bool udd_is_high_speed(void)
 {
 #ifdef USB_DEVICE_HS_SUPPORT
@@ -838,7 +881,6 @@ bool udd_is_high_speed(void)
 #endif
 }
 void udd_set_address(uint8_t address)
 {
 	udd_disable_address();
@@ -846,13 +888,11 @@ void udd_set_address(uint8_t address)
 	udd_enable_address();
 }
 uint8_t udd_getaddress(void)
 {
 	return udd_get_configured_address();
 }
 uint16_t udd_get_frame_number(void)
 {
 	return udd_frame_number();
@@ -875,14 +915,12 @@ void udd_send_remotewakeup(void)
 	}
 }
 void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
 {
 	udd_g_ctrlreq.payload = payload;
 	udd_g_ctrlreq.payload_size = payload_size;
 }
 #if (0 != USB_DEVICE_MAX_EP)
 bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 		uint16_t MaxEndpointSize)
@@ -1006,7 +1044,6 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 	return true;
 }
 void udd_ep_free(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1019,14 +1056,12 @@ void udd_ep_free(udd_ep_id_t ep)
 	udd_ep_job[ep_index - 1].stall_requested = false;
 }
 bool udd_ep_is_halted(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
 	return Is_udd_endpoint_stall_requested(ep_index);
 }
 bool udd_ep_set_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1067,7 +1102,6 @@ bool udd_ep_set_halt(udd_ep_id_t ep)
 	return true;
 }
 bool udd_ep_clear_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1108,7 +1142,6 @@ bool udd_ep_clear_halt(udd_ep_id_t ep)
 	return true;
 }
 bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 		uint8_t * buf, iram_size_t buf_size,
 		udd_callback_trans_t callback)
@@ -1175,7 +1208,6 @@ bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 #endif
 }
 void udd_ep_abort(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1204,7 +1236,6 @@ void udd_ep_abort(udd_ep_id_t ep)
 	udd_ep_abort_job(ep);
 }
 bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 		udd_callback_halt_cleared_t callback)
 {
@@ -1239,7 +1270,6 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 }
 #endif // (0 != USB_DEVICE_MAX_EP)
 #ifdef USB_DEVICE_HS_SUPPORT
 void udd_test_mode_j(void)
@@ -1248,20 +1278,17 @@ void udd_test_mode_j(void)
 	udd_enable_hs_test_mode_j();
 }
 void udd_test_mode_k(void)
 {
 	udd_enable_hs_test_mode();
 	udd_enable_hs_test_mode_k();
 }
 void udd_test_mode_se0_nak(void)
 {
 	udd_enable_hs_test_mode();
 }
 void udd_test_mode_packet(void)
 {
 	uint8_t i;
@@ -1305,8 +1332,6 @@ void udd_test_mode_packet(void)
 }
 #endif // USB_DEVICE_HS_SUPPORT
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT
@@ -1356,7 +1381,6 @@ static void udd_ctrl_init(void)
 	udd_ep_control_state = UDD_EPCTRL_SETUP;
 }
 static void udd_ctrl_setup_received(void)
 {
 	irqflags_t flags;
@@ -1418,7 +1442,6 @@ static void udd_ctrl_setup_received(void)
 	}
 }
 static void udd_ctrl_in_sent(void)
 {
 	static bool b_shortpacket = false;
@@ -1502,7 +1525,6 @@ static void udd_ctrl_in_sent(void)
 	cpu_irq_restore(flags);
 }
 static void udd_ctrl_out_received(void)
 {
 	irqflags_t flags;
@@ -1593,7 +1615,6 @@ static void udd_ctrl_out_received(void)
 	cpu_irq_restore(flags);
 }
 static void udd_ctrl_underflow(void)
 {
 	if (Is_udd_out_received(0))
@@ -1610,7 +1631,6 @@ static void udd_ctrl_underflow(void)
 	}
 }
 static void udd_ctrl_overflow(void)
 {
 	if (Is_udd_in_send(0))
@@ -1626,7 +1646,6 @@ static void udd_ctrl_overflow(void)
 	}
 }
 static void udd_ctrl_stall_data(void)
 {
 	// Stall all packets on IN & OUT control endpoint
@@ -1634,7 +1653,6 @@ static void udd_ctrl_stall_data(void)
 	udd_enable_stall_handshake(0);
 }
 static void udd_ctrl_send_zlp_in(void)
 {
 	irqflags_t flags;
@@ -1652,7 +1670,6 @@ static void udd_ctrl_send_zlp_in(void)
 	cpu_irq_restore(flags);
 }
 static void udd_ctrl_send_zlp_out(void)
 {
 	irqflags_t flags;
@@ -1668,7 +1685,6 @@ static void udd_ctrl_send_zlp_out(void)
 	cpu_irq_restore(flags);
 }
 static void udd_ctrl_endofrequest(void)
 {
 	// If a callback is registered then call it
@@ -1677,7 +1693,6 @@ static void udd_ctrl_endofrequest(void)
 	}
 }
 static bool udd_ctrl_interrupt(void)
 {
@@ -1728,7 +1743,6 @@ static bool udd_ctrl_interrupt(void)
 	return false;
 }
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS
@@ -1743,7 +1757,6 @@ static void udd_ep_job_table_reset(void)
 	}
 }
 static void udd_ep_job_table_kill(void)
 {
 	uint8_t i;
@@ -1754,7 +1767,6 @@ static void udd_ep_job_table_kill(void)
 	}
 }
 static void udd_ep_abort_job(udd_ep_id_t ep)
 {
 	ep &= USB_EP_ADDR_MASK;
@@ -1763,7 +1775,6 @@ static void udd_ep_abort_job(udd_ep_id_t ep)
 	udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
 }
 static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
 {
 	if (ptr_job->busy == false) {
@@ -1834,7 +1845,6 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
 		udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
 				UOTGHS_DEVDMACONTROL_CHANN_ENB;
 		// Disable IRQs to have a short sequence
 		// between read of EOT_STA and DMA enable
 		flags = cpu_irq_save();
@@ -2043,6 +2053,12 @@ static bool udd_ep_interrupt(void)
 				dbg_print("I ");
 				udd_disable_in_send_interrupt(ep);
 				// One bank is free then send a ZLP
 				// Marlin modification: Add a barrier to ensure in_send is disabled
 				// before it is cleared. This was not an observed problem, but
 				// other interrupts were seen to misbehave without this barrier.
 				__DSB();
 				udd_ack_in_send(ep);
 				udd_ack_fifocon(ep);
 				udd_ep_finish_job(ptr_job, false, ep);
@@ -129,7 +129,6 @@ extern "C" {
 #define Is_udd_vbus_transition()          (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
 //! @}
 //! @name UOTGHS device attach control
 //! These macros manage the UOTGHS Device attach.
 //! @{
@@ -141,7 +140,6 @@ extern "C" {
 #define Is_udd_detached()                 (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
 //! @}
 //! @name UOTGHS device bus events control
 //! These macros manage the UOTGHS Device bus events.
 //! @{
@@ -246,7 +244,6 @@ extern "C" {
 #define udd_get_configured_address()              (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
 //! @}
 //! @name UOTGHS Device endpoint drivers
 //! These macros manage the common features of the endpoints.
 //! @{
@@ -330,7 +327,6 @@ extern "C" {
 #define udd_data_toggle(ep)                       (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
 //! @}
 //! @name UOTGHS Device control endpoint
 //! These macros control the endpoints.
 //! @{
@@ -530,7 +526,6 @@ extern "C" {
  //! Tests if IN sending interrupt is enabled
 #define Is_udd_in_send_interrupt_enabled(ep)      (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))
  //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
  //! @param ep Endpoint of which to access FIFO data register
  //! @param scale Data scale in bits: 64, 32, 16 or 8
@@ -652,7 +647,6 @@ typedef struct {
 //! @}
 //! @}
 /// @cond 0
 /**INDENT-OFF**/
 #ifdef __cplusplus
@@ -53,7 +53,6 @@
 extern "C" {
 #endif
 //! \ingroup usb_group
 //! \defgroup otg_group UOTGHS OTG Driver
 //! UOTGHS low-level driver for OTG features
@@ -74,7 +73,6 @@ bool otg_dual_enable(void);
 */
 void otg_dual_disable(void);
 //! @name UOTGHS OTG ID pin management
 //! The ID pin come from the USB OTG connector (A and B receptable) and
 //! allows to select the USB mode host or device.
@@ -374,7 +374,6 @@ typedef struct {
  uint8_t bNumDeviceCaps;
 } usb_dev_bos_desc_t;
 /**
 * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
 *
@@ -411,7 +410,6 @@ typedef struct {
  uint8_t iFunction;        //!< Index of string descriptor
 } usb_association_desc_t;
 /**
 * \brief Standard USB configuration descriptor structure
 */
@@ -426,7 +424,6 @@ typedef struct {
  uint8_t bMaxPower;
 } usb_conf_desc_t;
 #define  USB_CONFIG_ATTR_MUST_SET         (1 << 7) //!< Must always be set
 #define  USB_CONFIG_ATTR_BUS_POWERED      (0 << 6) //!< Bus-powered
 #define  USB_CONFIG_ATTR_SELF_POWERED     (1 << 6) //!< Self-powered
@@ -475,7 +472,6 @@ typedef struct {
  uint8_t bInterval;
 } usb_ep_desc_t;
 /**
 * \brief A standard USB string descriptor structure
 */
@@ -168,7 +168,6 @@ COMPILER_PACK_SET(1)
 //! \name USB CDC Descriptors
 //@{
 //! CDC Header Functional Descriptor
 typedef struct {
  uint8_t bFunctionLength;
@@ -203,7 +202,6 @@ typedef struct {
  uint8_t bSlaveInterface0;
 } usb_cdc_union_desc_t;
 //! \name USB CDC Call Management Capabilities
 //@{
 //! Device handles call management itself
@@ -278,7 +276,6 @@ typedef struct {
 //@}
 //@}
 //! \name USB CDC notification message
 //@{
@@ -47,7 +47,6 @@
 #ifndef _USB_PROTOCOL_MSC_H_
 #define _USB_PROTOCOL_MSC_H_
 /**
 * \ingroup usb_protocol_group
 * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
@@ -89,7 +88,6 @@
 #define MSC_PROTOCOL_BULK           0x50  //!< Bulk-only
 //@}
 /**
 * \brief MSC USB requests (bRequest)
 */
@@ -98,7 +96,6 @@ enum usb_reqid_msc {
  USB_REQ_MSC_GET_MAX_LUN = 0xFE  //!< Get Max LUN
 };
 COMPILER_PACK_SET(1)
 /**
@@ -122,7 +119,6 @@ struct usb_msc_cbw {
 #define USB_CBW_LEN_MASK            0x1F  //!< Valid bits in bCBWCBLength
 //@}
 /**
 * \name A Command Status Wrapper (CSW).
 */
@@ -31,24 +31,28 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { return EEPROM.begin(MARLIN_EEPROM_SIZE); }
 bool PersistentStore::access_finish() { EEPROM.end(); return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  for (size_t i = 0; i < size; i++) {
-    EEPROM.write(pos++, value[i]);
+    const int p = REAL_EEPROM_ADDR(pos);
    EEPROM.write(p, value[i]);
    crc16(crc, &value[i], 1);
    ++pos;
  }
  return false;
 }
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  for (size_t i = 0; i < size; i++) {
-    uint8_t c = EEPROM.read(pos++);
+    const int p = REAL_EEPROM_ADDR(pos);
    uint8_t c = EEPROM.read(p);
    if (writing) value[i] = c;
    crc16(crc, &c, 1);
    ++pos;
  }
  return false;
 }
@@ -34,6 +34,10 @@
 #include <freertos/queue.h>
 #include "../../module/stepper.h"
 #if ENABLED(FT_MOTION)
  #include "../../module/ft_motion.h"
 #endif
 #define DMA_BUF_COUNT 8                                // number of DMA buffers to store data
 #define DMA_BUF_LEN   4092                             // maximum size in bytes
 #define I2S_SAMPLE_SIZE 4                              // 4 bytes, 32 bits per sample
@@ -134,8 +138,8 @@ static void IRAM_ATTR i2s_intr_handler_default(void *arg) {
  if (high_priority_task_awoken == pdTRUE) portYIELD_FROM_ISR();
-  // clear interrupt
+  // Clear pending interrupt
-  I2S0.int_clr.val = I2S0.int_st.val; //clear pending interrupt
+  I2S0.int_clr.val = I2S0.int_st.val;
 }
 void stepperTask(void *parameter) {
@@ -148,29 +152,43 @@ void stepperTask(void *parameter) {
    xQueueReceive(dma.queue, &dma.current, portMAX_DELAY);
    dma.rw_pos = 0;
    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.mode);
    while (dma.rw_pos < DMA_SAMPLE_COUNT) {
-      if (!nextMainISR) {
+
-        Stepper::pulse_phase_isr();
+      #if ENABLED(FT_MOTION)
-        nextMainISR = Stepper::block_phase_isr();
+
-      }
+        if (using_ftMotion) {
-      #if ENABLED(LIN_ADVANCE)
+          if (!nextMainISR) stepper.ftMotion_stepper();
-        else if (!nextAdvanceISR) {
+          nextMainISR = 0;
          Stepper::advance_isr();
          nextAdvanceISR = Stepper::la_interval;
        }
      #endif
      else
        i2s_push_sample();
-      nextMainISR--;
+      if (!using_ftMotion) {
        if (!nextMainISR) {
          Stepper::pulse_phase_isr();
          nextMainISR = Stepper::block_phase_isr();
        }
        #if ENABLED(LIN_ADVANCE)
          else if (!nextAdvanceISR) {
            Stepper::advance_isr();
            nextAdvanceISR = Stepper::la_interval;
          }
        #endif
        else
          i2s_push_sample();
-      #if ENABLED(LIN_ADVANCE)
+        nextMainISR--;
        if (nextAdvanceISR == Stepper::LA_ADV_NEVER)
          nextAdvanceISR = Stepper::la_interval;
-        if (nextAdvanceISR && nextAdvanceISR != Stepper::LA_ADV_NEVER)
+        #if ENABLED(LIN_ADVANCE)
-          nextAdvanceISR--;
+          if (nextAdvanceISR == Stepper::LA_ADV_NEVER)
-      #endif
+            nextAdvanceISR = Stepper::la_interval;
          if (nextAdvanceISR && nextAdvanceISR != Stepper::LA_ADV_NEVER)
            nextAdvanceISR--;
        #endif
      }
    }
  }
 }
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -27,7 +27,7 @@
 /**
 * Not every MarlinSerial instance should handle emergency parsing, as
- * it would not make sense to parse GCode from TMC responses
+ * it would not make sense to parse G-Code from TMC responses
 */
 constexpr bool serial_handles_emergency(int port) {
  return false
@@ -37,7 +37,7 @@
  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  eeprom_init();
@@ -49,7 +49,7 @@ bool PersistentStore::access_finish() { return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    uint8_t v = *value;
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    // EEPROM has only ~100,000 write cycles,
    // so only write bytes that have changed!
@@ -70,16 +70,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size,
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
                                uint16_t *crc, const bool writing /*=true*/) {
  do {
-    uint8_t *const p = (uint8_t *const)pos;
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
-    uint8_t c = eeprom_read_byte(p);
+    if (writing) *value = c;
    if (writing)
    {
      *value = c;
    }
    crc16(crc, &c, 1);
    pos++;
    value++;
@@ -38,9 +38,7 @@
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity() {
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
  return MARLIN_EEPROM_SIZE;
 }
 #define _ALIGN(x) __attribute__((aligned(x)))
 static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
@@ -85,11 +83,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing /*=true*/) {
  for (size_t i = 0; i < size; i++) {
-    uint8_t c = HAL_eeprom_data[pos + i];
+    const uint8_t c = HAL_eeprom_data[pos + i];
    if (writing) value[i] = c;
    crc16(crc, &c, 1);
  }
  pos += size;
  return false;
 }
@@ -35,7 +35,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_finish() { return true; }
@@ -56,7 +56,7 @@ bool PersistentStore::access_start() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    // EEPROM has only ~100,000 write cycles,
    // so only write bytes that have changed!
@@ -77,10 +77,8 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t *)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t *)REAL_EEPROM_ADDR(pos));
-    if (writing && value) {
+    if (writing && value) *value = c;
      *value = c;
    }
    crc16(crc, &c, 1);
    pos++;
@@ -40,9 +40,15 @@ void endstopIRQHandler() {
  CHECK(X_MAX);
  CHECK(X_MIN);
  CHECK(X2_MAX);
  CHECK(X2_MIN);
  CHECK(Y_MAX);
  CHECK(Y_MIN);
  CHECK(Y2_MAX);
  CHECK(Y2_MIN);
  CHECK(Z_MAX);
  CHECK(Z_MIN);
@@ -52,6 +58,9 @@ void endstopIRQHandler() {
  CHECK(Z3_MAX);
  CHECK(Z3_MIN);
  CHECK(Z4_MAX);
  CHECK(Z4_MIN);
  CHECK(Z_MIN_PROBE);
  // Update endstops
@@ -69,9 +78,15 @@ void setup_endstop_interrupts() {
  SETUP(X_MAX);
  SETUP(X_MIN);
  SETUP(X2_MAX);
  SETUP(X2_MIN);
  SETUP(Y_MAX);
  SETUP(Y_MIN);
  SETUP(Y2_MAX);
  SETUP(Y2_MIN);
  SETUP(Z_MAX);
  SETUP(Z_MIN);
@@ -81,6 +96,9 @@ void setup_endstop_interrupts() {
  SETUP(Z3_MAX);
  SETUP(Z3_MIN);
  SETUP(Z4_MAX);
  SETUP(Z4_MIN);
  SETUP(Z_MIN_PROBE);
  #undef SETUP
@@ -88,7 +106,7 @@ void setup_endstop_interrupts() {
 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_Y_MAX, USE_Y_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
  #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -58,11 +58,9 @@
 #endif
 #if TEMP_SENSOR_SOC
-  #if !defined(TEMP_SOC_PIN)
+  #ifndef TEMP_SOC_PIN
    #error "TEMP_SOC_PIN must be defined to use TEMP_SENSOR_SOC."
-  #endif
+  #elif IS_GPIO_PIN(TEMP_SOC_PIN)
  #if defined(TEMP_SOC_PIN) && IS_GPIO_PIN(TEMP_SOC_PIN)
    #error "TEMP_SOC_PIN must not be a valid GPIO pin to avoid conflicts."
  #endif
 #endif
@@ -23,7 +23,7 @@
 #ifdef ARDUINO_ARCH_HC32
 #ifdef REDIRECT_PRINTF_TO_SERIAL
-#if !defined(__GNUC__)
+#ifndef __GNUC__
  #error "only GCC is supported"
 #endif
@@ -19,6 +19,7 @@
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #ifdef __PLAT_LINUX__
 #include "../../inc/MarlinConfig.h"
@@ -57,4 +58,49 @@ uint16_t MarlinHAL::adc_value() {
 void MarlinHAL::reboot() { /* Reset the application state and GPIO */ }
 // ------------------------
 // BSD String
 // ------------------------
 /**
 * Copyright (c) 1998, 2015 Todd C. Miller <Todd.Miller@courtesan.com>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
 #ifndef HAS_LIBBSD
  /**
   * Copy string src to buffer dst of size dsize.  At most dsize-1
   * chars will be copied.  Always NUL terminates (unless dsize == 0).
   * Returns strlen(src); if retval >= dsize, truncation occurred.
   */
  size_t MarlinHAL::_strlcpy(char *dst, const char *src, size_t dsize) {
    const char *osrc = src;
    size_t nleft = dsize;
    // Copy as many bytes as will fit.
    if (nleft != 0) while (--nleft != 0) if ((*dst++ = *src++) == '\0') break;
    // Not enough room in dst, add NUL and traverse rest of src.
    if (nleft == 0) {
      if (dsize != 0) *dst = '\0';    // NUL-terminate dst
      while (*src++) { /* nada */ }
    }
    return (src - osrc - 1); // count does not include NUL
  }
 #endif // HAS_LIBBSD
 #endif // __PLAT_LINUX__
@@ -26,6 +26,11 @@
 #include <iostream>
 #include <stdint.h>
 #include <stdarg.h>
 #ifdef HAS_LIBBSD
  #include <bsd/string.h>
 #endif
 #undef min
 #undef max
 #include <algorithm>
@@ -162,4 +167,13 @@ public:
  }
  static void set_pwm_frequency(const pin_t, int) {}
  #ifndef HAS_LIBBSD
    /**
     * Redirect missing strlcpy here
     */
    static size_t _strlcpy(char *dst, const char *src, size_t dsize);
    #define strlcpy hal._strlcpy
  #endif
 };
@@ -35,7 +35,7 @@
 uint8_t buffer[MARLIN_EEPROM_SIZE];
 char filename[] = "eeprom.dat";
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  const char eeprom_erase_value = 0xFF;
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -28,9 +28,6 @@
 #include <pinmapping.h>
 #define strlcpy(A, B, C)   strncpy(A, B, (C) - 1)
 #define strlcpy_P(A, B, C) strncpy_P(A, B, (C) - 1)
 #define HIGH         0x01
 #define LOW          0x00
@@ -60,7 +60,6 @@
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 // Types
 typedef struct {
@@ -21,9 +21,6 @@
 */
 #pragma once
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                        // needed due to the speed and mode required for communicating with each device being different.
@@ -111,6 +111,12 @@ void MarlinHAL::init() {
  #if HAS_SERVO_3
    INIT_SERVO(3);
  #endif
  #if HAS_SERVO_4
    INIT_SERVO(4);
  #endif
  #if HAS_SERVO_5
    INIT_SERVO(5);
  #endif
  //debug_frmwrk_init();
  //_DBG("\n\nDebug running\n");
@@ -61,7 +61,7 @@ static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
 static bool eeprom_dirty = false;
 static int current_slot = 0;
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  uint32_t first_nblank_loc, first_nblank_val;
@@ -112,7 +112,8 @@ bool PersistentStore::access_finish() {
 }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  for (size_t i = 0; i < size; i++) ram_eeprom[pos + i] = value[i];
+  const int p = REAL_EEPROM_ADDR(pos);
  for (size_t i = 0; i < size; i++) ram_eeprom[p + i] = value[i];
  eeprom_dirty = true;
  crc16(crc, value, size);
  pos += size;
@@ -120,8 +121,9 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 }
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  const int p = REAL_EEPROM_ADDR(pos);
  const uint8_t * const buff = writing ? &value[0] : &ram_eeprom[pos];
-  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[pos + i];
+  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[p + i];
  crc16(crc, buff, size);
  pos += size;
  return false;  // return true for any error
@@ -49,7 +49,7 @@ bool eeprom_file_open = false;
  #define MARLIN_EEPROM_SIZE size_t(0x1000) // 4KiB of Emulated EEPROM
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  const char eeprom_erase_value = 0xFF;
@@ -36,7 +36,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE           0x8000 // 32K
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -45,7 +45,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -64,7 +64,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from external EEPROM
-    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -21,9 +21,7 @@
 */
 #pragma once
-#include "../../core/macros.h"
+#if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
 #if ALL(HAS_MEDIA, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                        // needed due to the speed and mode required for communicating with each device being different.
                        // This requirement can be removed if the SPI access to these devices is updated to use
@@ -8,14 +8,12 @@ DriverVer =04/14/2008, 5.1.2600.5512
 [Manufacturer]
 %PROVIDER%=DeviceList,ntamd64
 [DeviceList]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 [DeviceList.ntamd64]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00
 [LPC1768USB]
 include=mdmcpq.inf
 CopyFiles=FakeModemCopyFileSection
@@ -28,7 +26,6 @@ AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 [SerialPropPageAddReg]
 HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"
 [Strings]
 PROVIDER   = "marlinfw.org"
 DRIVER.SVC = "Marlin USB Driver"
@@ -0,0 +1,67 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 /**
 * Copyright (c) 1998, 2015 Todd C. Miller <Todd.Miller@courtesan.com>
 *
 * Permission to use, copy, modify, and distribute this software for any
 * purpose with or without fee is hereby granted, provided that the above
 * copyright notice and this permission notice appear in all copies.
 *
 * THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
 * WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
 * MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
 * ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
 * WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
 * ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
 * OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
 */
 #ifdef __PLAT_NATIVE_SIM__
 #ifndef HAS_LIBBSD
  #include "HAL.h"
  /**
   * Copy string src to buffer dst of size dsize.  At most dsize-1
   * chars will be copied.  Always NUL terminates (unless dsize == 0).
   * Returns strlen(src); if retval >= dsize, truncation occurred.
   */
  size_t MarlinHAL::_strlcpy(char *dst, const char *src, size_t dsize) {
    const char *osrc = src;
    size_t nleft = dsize;
    // Copy as many bytes as will fit.
    if (nleft != 0) while (--nleft != 0) if ((*dst++ = *src++) == '\0') break;
    // Not enough room in dst, add NUL and traverse rest of src.
    if (nleft == 0) {
      if (dsize != 0) *dst = '\0';    // NUL-terminate dst
      while (*src++) { /* nada */ }
    }
    return (src - osrc - 1); // count does not include NUL
  }
 #endif // HAS_LIBBSD
 #endif // __PLAT_NATIVE_SIM__
@@ -263,4 +263,14 @@ public:
    analogWrite(pin, v);
  }
  static void set_pwm_frequency(const pin_t, int) {}
  #ifndef HAS_LIBBSD
    /**
     * Redirect missing strlcpy here
     */
    static size_t _strlcpy(char *dst, const char *src, size_t dsize);
    #define strlcpy hal._strlcpy
  #endif
 };
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -61,7 +61,6 @@
 #define INVALID_SERVO         255     // flag indicating an invalid servo index
 // Types
 typedef struct {
@@ -21,9 +21,6 @@
 */
 #pragma once
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI      // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                            // needed due to the speed and mode required for communicating with each device being different.
@@ -31,7 +31,6 @@
 * resulted in using about about 25% of the CPU's time.
 */
 #ifdef __cplusplus
  extern "C" {
 #endif
@@ -40,8 +40,6 @@
  DefaultSerial3 MSerial2(false, Serial2);
 #endif
 #define WDT_CONFIG_PER_7_Val 0x9u
 #define WDT_CONFIG_PER_Pos 0
 #define WDT_CONFIG_PER_7 (WDT_CONFIG_PER_7_Val << WDT_CONFIG_PER_Pos)
@@ -165,7 +163,6 @@ void MarlinHAL::adc_init() {
  ADC->REFCTRL.reg = ADC_REFCTRL_REFSEL_INTVCC1;
  ADC->AVGCTRL.reg = ADC_AVGCTRL_SAMPLENUM_32| ADC_AVGCTRL_ADJRES(4);;
  ADC->CTRLB.reg = ADC_CTRLB_PRESCALER_DIV128 |
                 ADC_CTRLB_RESSEL_16BIT |
                 ADC_CTRLB_FREERUN;
@@ -47,7 +47,6 @@ typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
 extern DefaultSerial2 MSerial0;
 extern DefaultSerial3 MSerial1;
 #define __MSERIAL(X) MSerial##X
 #define _MSERIAL(X) __MSERIAL(X)
 #define MSERIAL(X) _MSERIAL(INCREMENT(X))
@@ -57,8 +57,6 @@
                                       : (P == 3 && WITHIN(B, 20, 21)) ? 10 + (B) - 20                                        \
                                       : -1)
 #define A2_AIN 3
 #define A3_AIN 4
 #define A4_AIN 5
@@ -55,7 +55,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 FORCE_INLINE static uint16_t getTimerCount() {
@@ -37,19 +37,24 @@ static const uint8_t flashdata[TOTAL_FLASH_SIZE]  __attribute__((__aligned__(256
 #include "../shared/eeprom_api.h"
-size_t PersistentStore::capacity() {
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
-  return MARLIN_EEPROM_SIZE;
+
- /* const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
+/*
 size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
  const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
                sblk = NVMCTRL->SEESTAT.bit.SBLK;
-  return   (!psz && !sblk)         ? 0
+  return (
-         : (psz <= 2)              ? (0x200 << psz)
+    (!psz && !sblk)         ? 0
-         : (sblk == 1 || psz == 3) ?  4096
+   : (psz <= 2)              ? (0x200 << psz)
-         : (sblk == 2 || psz == 4) ?  8192
+   : (sblk == 1 || psz == 3) ?  4096
-         : (sblk <= 4 || psz == 5) ? 16384
+   : (sblk == 2 || psz == 4) ?  8192
-         : (sblk >= 9 && psz == 7) ? 65536
+   : (sblk <= 4 || psz == 5) ? 16384
-                                   : 32768;*/
+   : (sblk >= 9 && psz == 7) ? 65536
                             : 32768
  ) - eeprom_exclude_size;
 }
 */
 uint32_t PAGE_SIZE;
 uint32_t ROW_SIZE;
@@ -99,8 +104,7 @@ bool PersistentStore::access_finish() {
    volatile uint32_t *dst_addr =  (volatile uint32_t *) &flashdata;
    uint32_t *pointer = (uint32_t *) buffer;
-    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i+=4) {
+    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i += 4) {
      *dst_addr = (uint32_t) *pointer;
      pointer++;
      dst_addr ++;
@@ -120,19 +124,19 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  if (!hasWritten) {
    // init temp buffer
    buffer = (uint8_t *) malloc(MARLIN_EEPROM_SIZE);
-    hasWritten=true;
+    hasWritten = true;
  }
-  memcpy(buffer+pos,value,size);
+  memcpy(buffer + REAL_EEPROM_ADDR(pos), value, size);
  pos += size;
  return false;
 }
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  volatile uint8_t *dst_addr =  (volatile uint8_t *) &flashdata;
+  volatile uint8_t *dst_addr = (volatile uint8_t *) &flashdata;
-  dst_addr += pos;
+  dst_addr += REAL_EEPROM_ADDR(pos);
-  memcpy(value,(const void *) dst_addr,size);
+  memcpy(value, (const void *)dst_addr, size);
  pos += size;
  return false;
 }
@@ -38,7 +38,7 @@
 static bool initialized;
-size_t PersistentStore::capacity() { return qspi.size(); }
+size_t PersistentStore::capacity() { return qspi.size() - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  if (!initialized) {
@@ -56,7 +56,7 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    const uint8_t v = *value;
-    qspi.writeByte(pos, v);
+    qspi.writeByte(REAL_EEPROM_ADDR(pos), v);
    crc16(crc, &v, 1);
    pos++;
    value++;
@@ -66,7 +66,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = qspi.readByte(pos);
+    const uint8_t c = qspi.readByte(REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -42,7 +42,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -51,7 +51,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -69,7 +69,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
@@ -85,7 +85,6 @@ void u8g_SetPILevel(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
 uint8_t u8g_com_samd21_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
  switch (msg) {
    case U8G_COM_MSG_STOP:
      break;
@@ -54,7 +54,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 FORCE_INLINE static uint16_t getTimerCount() {
@@ -35,7 +35,7 @@
 static bool initialized;
-size_t PersistentStore::capacity() { return qspi.size(); }
+size_t PersistentStore::capacity() { return qspi.size() - eeprom_exclude_size; }
 bool PersistentStore::access_start() {
  if (!initialized) {
@@ -53,7 +53,7 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    const uint8_t v = *value;
-    qspi.writeByte(pos, v);
+    qspi.writeByte(REAL_EEPROM_ADDR(pos), v);
    crc16(crc, &v, 1);
    pos++;
    value++;
@@ -63,7 +63,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = qspi.readByte(pos);
+    const uint8_t c = qspi.readByte(REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -40,7 +40,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -49,7 +49,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -67,7 +67,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
 /**
 * Marlin 3D Printer Firmware
 * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
 *
 * Based on Sprinter and grbl.
 * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
 *
 * This program is free software: you can redistribute it and/or modify
 * it under the terms of the GNU General Public License as published by
 * the Free Software Foundation, either version 3 of the License, or
 * (at your option) any later version.
 *
 * This program is distributed in the hope that it will be useful,
 * but WITHOUT ANY WARRANTY; without even the implied warranty of
 * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
 * GNU General Public License for more details.
 *
 * You should have received a copy of the GNU General Public License
 * along with this program.  If not, see <https://www.gnu.org/licenses/>.
 *
 */
 #pragma once
--- a/Show More
+++ b/Show More