enable

Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>

.aiderignore

@@ -0,0 +1,21 @@
+# Build artifacts
+buildroot/
+*.o
+*.a
+*.so
+*.dylib
+*.dll
+*.exe
+
+# Web assets
+*.min.js
+*.min.css
+
+# Generated files
+__pycache__/
+*.pyc
+.DS_Store
+
+# IDE files
+.vscode/
+.idea/

.github/workflows/auto-label.yml

@@ -14,7 +14,7 @@ jobs:
   autolabel:
     name: Auto Label
     if: github.repository == 'MarlinFirmware/Marlin'
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
     steps:
     - name: Auto Label for [BUG]
       uses: actions/github-script@v7

.github/workflows/bump-date.yml

@@ -14,7 +14,7 @@ jobs:
     name: Bump Distribution Date
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
 

.github/workflows/check-pr.yml

@@ -18,7 +18,7 @@ jobs:
     name: PR Bad Target
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: superbrothers/close-pull-request@v3

.github/workflows/ci-build-tests.yml

@@ -34,13 +34,16 @@ jobs:
     name: Build Test
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     strategy:
       fail-fast: true
       matrix:
         test-platform:
 
+        # RP2040
+        - SKR_Pico
+
         # Native
         - linux_native
         - simulator_linux_release
@@ -110,7 +113,7 @@ jobs:
         - BTT_GTR_V1_0
         - BTT_SKR_PRO
         - FLYF407ZG
-        - FYSETC_S6
+        - STM32F446VE_fysetc
         - LERDGEK
         - LERDGEX
         - mks_robin_pro2
@@ -148,6 +151,12 @@ jobs:
         # HC32
         - HC32F460C_aquila_101
 
+        # GD32F3
+        - GD32F303RE_creality_mfl
+
+        # GD32F1
+        - GD32F103RC_aquila_mfl
+
         # LPC176x - Lengthy tests
         - LPC1768
         - LPC1769
@@ -161,15 +170,20 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        key: ${{ runner.os }}-pip-build-v1
         restore-keys: |
-          ${{ runner.os }}-pip-
+          ${{ runner.os }}-pip-build-
 
     - name: Cache PlatformIO
       uses: actions/cache@v4
       with:
-        path: ~/.platformio
+        path: |
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+          ~/.platformio
+          .pio/build
+          .pio/libdeps
+        key: ${{ runner.os }}-pio-build-v1
+        restore-keys: |
+          ${{ runner.os }}-pio-build-
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5
@@ -185,6 +199,7 @@ jobs:
 
     - name: Install Simulator dependencies
       run: |
+        sudo apt-get update
         sudo apt-get install build-essential
         sudo apt-get install libsdl2-dev
         sudo apt-get install libsdl2-net-dev

.github/workflows/ci-unit-tests.yml

@@ -36,7 +36,7 @@ jobs:
     # pulls them into additional branches.
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - name: Check out the PR
@@ -46,15 +46,20 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        key: ${{ runner.os }}-pip-unit-v1
         restore-keys: |
-          ${{ runner.os }}-pip-
+          ${{ runner.os }}-pip-unit-
 
     - name: Cache PlatformIO
       uses: actions/cache@v4
       with:
-        path: ~/.platformio
+        path: |
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
+          ~/.platformio
+          .pio/build
+          .pio/libdeps
+        key: ${{ runner.os }}-pio-tests-v1
+        restore-keys: |
+          ${{ runner.os }}-pio-tests-
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5

.github/workflows/ci-validate-boards.yml

@@ -23,7 +23,7 @@ jobs:
     name: Validate boards.h
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - name: Check out the PR
@@ -33,9 +33,9 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        key: ${{ runner.os }}-pip-boards-v1
         restore-keys: |
-          ${{ runner.os }}-pip-
+          ${{ runner.os }}-pip-boards-
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5

.github/workflows/ci-validate-pins.yml

@@ -26,7 +26,7 @@ jobs:
     name: Validate Pins Files
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - name: Check out the PR
@@ -36,9 +36,9 @@ jobs:
       uses: actions/cache@v4
       with:
         path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        key: ${{ runner.os }}-pip-pins-v1
         restore-keys: |
-          ${{ runner.os }}-pip-
+          ${{ runner.os }}-pip-pins-
 
     - name: Select Python 3.9
       uses: actions/setup-python@v5

.github/workflows/clean-closed.yml

@@ -13,7 +13,7 @@ on:
 
 jobs:
   remove_label:
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     strategy:
       matrix:

.github/workflows/close-stale.yml

@@ -14,7 +14,7 @@ jobs:
     name: Close Stale Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: actions/stale@v9

.github/workflows/lock-closed.yml

@@ -14,7 +14,7 @@ jobs:
     name: Lock Closed Issues
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: dessant/lock-threads@v5

.github/workflows/unlock-reopened.yml

@@ -14,7 +14,7 @@ jobs:
     name: Unlock Reopened
     if: github.repository == 'MarlinFirmware/Marlin'
 
-    runs-on: ubuntu-latest
+    runs-on: ubuntu-22.04
 
     steps:
     - uses: OSDKDev/unlock-issues@v1.1

.gitignore

@@ -169,3 +169,6 @@ __pycache__
 tags
 *.logs
 *.bak
+.aider*
+!.aiderignore
+.env

Makefile

@@ -17,7 +17,7 @@ help:
 	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
 	@echo "make unit-test-single-local    : Run unit tests for a single config locally"
 	@echo "make unit-test-single-local-docker : Run unit tests for a single config locally, using docker"
-	@echo "make unit-test-all-local      : Run all code tests locally"
+	@echo "make unit-test-all-local       : Run all code tests locally"
 	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker"
 	@echo "make setup-local-docker        : Setup local docker using buildx"
 	@echo ""

Marlin/Configuration.h

@@ -71,6 +71,8 @@
   #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif
 
+// @section serial
+
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
@@ -127,6 +129,7 @@
 
 // Name displayed in the LCD "Ready" message and Info menu
 //#define CUSTOM_MACHINE_NAME "3D Printer"
+//#define CONFIGURABLE_MACHINE_NAME // Add G-code M550 to set/report the machine name
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -257,6 +260,7 @@
   #define SWITCHING_NOZZLE_SERVO_ANGLES { 0, 90 }   // A pair of angles for { E0, E1 }.
                                                     // For Dual Servo use two pairs: { { lower, raise }, { lower, raise } }
   #define SWITCHING_NOZZLE_SERVO_DWELL 2500         // Dwell time to wait for servo to make physical move
+  #define SWITCHING_NOZZLE_LIFT_TO_PROBE            // Lift toolheads out of the way while probing
 #endif
 
 // Switch nozzles by bumping the toolhead. Requires EVENT_GCODE_TOOLCHANGE_#.
@@ -584,7 +588,7 @@
 #define DUMMY_THERMISTOR_998_VALUE  25
 #define DUMMY_THERMISTOR_999_VALUE 100
 
-// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1
+// Resistor values when using MAX31865 sensors (-5) on TEMP_SENSOR_0 / 1 / 2 / BED
 #if TEMP_SENSOR_IS_MAX_TC(0)
   #define MAX31865_SENSOR_OHMS_0      100 // (Ω) Typically 100 or 1000 (PT100 or PT1000)
   #define MAX31865_CALIBRATION_OHMS_0 430 // (Ω) Typically 430 for Adafruit PT100; 4300 for Adafruit PT1000
@@ -597,6 +601,10 @@
   #define MAX31865_SENSOR_OHMS_2      100
   #define MAX31865_CALIBRATION_OHMS_2 430
 #endif
+#if TEMP_SENSOR_IS_MAX_TC(BED)
+  #define MAX31865_SENSOR_OHMS_BED      100
+  #define MAX31865_CALIBRATION_OHMS_BED 430
+#endif
 
 #if HAS_E_TEMP_SENSOR
   #define TEMP_RESIDENCY_TIME         10  // (seconds) Time to wait for hotend to "settle" in M109
@@ -689,7 +697,9 @@
 #define PID_K1     0.95   // Smoothing factor within any PID loop
 
 #if ENABLED(PIDTEMP)
-  //#define PID_DEBUG             // Print PID debug data to the serial port. Use 'M303 D' to toggle activation.
+  //#define MIN_POWER 0           // Min power to improve PID stability (0..PID_MAX).
+                                  // Get the power from the temperature report ('M105' => @:nnn) and try P*2-20 to P*2-10.
+  //#define PID_DEBUG             // Print PID debug data to the serial port. Use 'M303 D' to enable/disable.
   //#define PID_PARAMS_PER_HOTEND // Use separate PID parameters for each extruder (useful for mismatched extruders)
                                   // Set/get with G-code: M301 E[extruder number, 0-2]
 
@@ -788,8 +798,9 @@
 //#define PIDTEMPBED
 
 #if ENABLED(PIDTEMPBED)
-  //#define MIN_BED_POWER 0
+  //#define MIN_BED_POWER 0   // Min power to improve PID stability (0..MAX_BED_POWER).
-  //#define PID_BED_DEBUG // Print Bed PID debug data to the serial port.
+                              // Get the power from the temperature report ('M105' => B@:nnn) and try P*2-20 to P*2-10.
+  //#define PID_BED_DEBUG     // Print Bed PID debug data to the serial port. Use 'M303 D' to enable/disable.
 
   // 120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
   // from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
@@ -870,12 +881,12 @@
 #define MAX_CHAMBER_POWER 255 // limits duty cycle to chamber heater; 255=full current
 
 #if ENABLED(PIDTEMPCHAMBER)
-  #define MIN_CHAMBER_POWER 0
+  //#define MIN_CHAMBER_POWER 0 // Min power to improve PID stability. (0..MAX_CHAMBER_POWER)
-  //#define PID_CHAMBER_DEBUG // Print Chamber PID debug data to the serial port.
+                                // Get the power from the temperature report ('M105' => C@:nnn) and try P*2-20 to P*2-10.
+  //#define PID_CHAMBER_DEBUG   // Print Chamber PID debug data to the serial port. Use 'M303 D' to enable/disable.
 
   // Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
   // and placed inside the small Creality printer enclosure tent.
-  //
   #define DEFAULT_chamberKp  37.04
   #define DEFAULT_chamberKi   1.40
   #define DEFAULT_chamberKd 655.17
@@ -889,7 +900,7 @@
 #if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
   //#define PID_OPENLOOP          // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
   //#define SLOW_PWM_HEATERS      // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
-  #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
+  #define PID_FUNCTIONAL_RANGE 20 // If the temperature difference between the target temperature and the actual temperature
                                   // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
 
   //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
@@ -941,7 +952,7 @@
 //============================= Mechanical Settings =========================
 //===========================================================================
 
-// @section machine
+// @section kinematics
 
 // Enable one of the options below for CoreXY, CoreXZ, or CoreYZ kinematics,
 // either in the usual order or reversed
@@ -965,6 +976,15 @@
 // Enable for a belt style printer with endless "Z" motion
 //#define BELTPRINTER
 
+// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
+//#define ARTICULATED_ROBOT_ARM
+
+// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
+// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
+//#define FOAMCUTTER_XYUV
+
+// @section polargraph
+
 // Enable for Polargraph Kinematics
 //#define POLARGRAPH
 #if ENABLED(POLARGRAPH)
@@ -1008,9 +1028,6 @@
   // Print surface diameter/2 minus unreachable space (avoid collisions with vertical towers).
   #define PRINTABLE_RADIUS       140.0    // (mm)
 
-  // Maximum reachable area
-  #define DELTA_MAX_RADIUS       140.0    // (mm)
-
   // Center-to-center distance of the holes in the diagonal push rods.
   #define DELTA_DIAGONAL_ROD 250.0        // (mm)
 
@@ -1151,15 +1168,6 @@
   #define FEEDRATE_SCALING                  // Convert XY feedrate from mm/s to degrees/s on the fly
 #endif
 
-// @section machine
-
-// Articulated robot (arm). Joints are directly mapped to axes with no kinematics.
-//#define ARTICULATED_ROBOT_ARM
-
-// For a hot wire cutter with parallel horizontal axes (X, I) where the heights of the two wire
-// ends are controlled by parallel axes (Y, J). Joints are directly mapped to axes (no kinematics).
-//#define FOAMCUTTER_XYUV
-
 //===========================================================================
 //============================== Endstop Settings ===========================
 //===========================================================================
@@ -1505,7 +1513,6 @@
  * For information about this sensor https://github.com/bigtreetech/MicroProbe
  *
  * Also requires PROBE_ENABLE_DISABLE
- * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
  */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1533,6 +1540,20 @@
   #define PROBE_DEPLOY_FEEDRATE (133*60)  // (mm/min) Probe deploy speed
   #define PROBE_STOW_FEEDRATE   (133*60)  // (mm/min) Probe stow speed
 
+  /**
+   * Magnetically Mounted Probe with a Servo mechanism
+   * Probe Deploy and Stow both follow the same basic sequence:
+   *  - Rotate the SERVO to its Deployed angle
+   *  - Perform XYZ moves to deploy or stow the PROBE
+   *  - Rotate the SERVO to its Stowed angle
+   */
+  //#define MAG_MOUNTED_PROBE_SERVO_NR 0             // Servo Number for this probe
+  #ifdef MAG_MOUNTED_PROBE_SERVO_NR
+    #define MAG_MOUNTED_PROBE_SERVO_ANGLES { 90, 0 } // Servo Angles for Deployed, Stowed
+    #define MAG_MOUNTED_PRE_DEPLOY { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo activation
+    #define MAG_MOUNTED_PRE_STOW   { PROBE_DEPLOY_FEEDRATE, { 15, 160, 30 } }  // Safe position for servo deactivation
+  #endif
+
   #define MAG_MOUNTED_DEPLOY_1 { PROBE_DEPLOY_FEEDRATE, { 245, 114, 30 } }  // Move to side Dock & Attach probe
   #define MAG_MOUNTED_DEPLOY_2 { PROBE_DEPLOY_FEEDRATE, { 210, 114, 30 } }  // Move probe off dock
   #define MAG_MOUNTED_DEPLOY_3 { PROBE_DEPLOY_FEEDRATE, {   0,   0,  0 } }  // Extra move if needed
@@ -1644,15 +1665,15 @@
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10
 
-// X and Y axis travel speed (mm/min) between probes.
+// X and Y axis travel speed between probes.
 // Leave undefined to use the average of the current XY homing feedrate.
-#define XY_PROBE_FEEDRATE (133*60)
+#define XY_PROBE_FEEDRATE    (133*60) // (mm/min)
 
-// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
+// Feedrate for the first approach when double-probing (MULTIPLE_PROBING == 2)
-#define Z_PROBE_FEEDRATE_FAST (4*60)
+#define Z_PROBE_FEEDRATE_FAST  (4*60) // (mm/min)
 
-// Feedrate (mm/min) for the "accurate" probe of each point
+// Feedrate for the "accurate" probe of each point
-#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
+#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2) // (mm/min)
 
 /**
  * Probe Activation Switch
@@ -1769,17 +1790,17 @@
 // @section stepper drivers
 
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
-// :{ 0:'Low', 1:'High' }
+// :['LOW', 'HIGH']
-#define X_ENABLE_ON 0
+#define X_ENABLE_ON LOW
-#define Y_ENABLE_ON 0
+#define Y_ENABLE_ON LOW
-#define Z_ENABLE_ON 0
+#define Z_ENABLE_ON LOW
-#define E_ENABLE_ON 0 // For all extruders
+#define E_ENABLE_ON LOW // For all extruders
-//#define I_ENABLE_ON 0
+//#define I_ENABLE_ON LOW
-//#define J_ENABLE_ON 0
+//#define J_ENABLE_ON LOW
-//#define K_ENABLE_ON 0
+//#define K_ENABLE_ON LOW
-//#define U_ENABLE_ON 0
+//#define U_ENABLE_ON LOW
-//#define V_ENABLE_ON 0
+//#define V_ENABLE_ON LOW
-//#define W_ENABLE_ON 0
+//#define W_ENABLE_ON LOW
 
 // Disable axis steppers immediately when they're not being stepped.
 // WARNING: When motors turn off there is a chance of losing position accuracy!
@@ -2054,9 +2075,9 @@
         //#define FIL_MOTION8_PULLUP
         //#define FIL_MOTION8_PULLDOWN
       #endif
-    #endif
+    #endif // FILAMENT_MOTION_SENSOR
-  #endif
+  #endif // FILAMENT_RUNOUT_DISTANCE_MM
-#endif
+#endif // FILAMENT_RUNOUT_SENSOR
 
 //===========================================================================
 //=============================== Bed Leveling ==============================
@@ -2102,6 +2123,12 @@
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING
 
+/**
+ * Commands to execute at the start of G29 probing,
+ * after switching to the PROBING_TOOL.
+ */
+//#define EVENT_GCODE_BEFORE_G29 "M300 P440 S200"
+
 /**
  * Commands to execute at the end of G29 probing.
  * Useful to retract or move the Z probe out of the way.
@@ -2250,7 +2277,7 @@
   //===========================================================================
 
   #define MESH_INSET 10          // Set Mesh bounds as an inset region of the bed
-  #define GRID_MAX_POINTS_X 3    // Don't use more than 7 points per axis, implementation limited.
+  #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   //#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
@@ -2886,13 +2913,15 @@
 //
 //#define MAKEBOARD_MINI_2_LINE_DISPLAY_1602
 
-//
+/**
-// ANET and Tronxy 20x4 Controller
+ * ANET and Tronxy 20x4 Controller
-//
+ * LCD2004 display with 5 analog buttons.
-//#define ZONESTAR_LCD            // Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
+ *
-                                  // This LCD is known to be susceptible to electrical interference
+ * NOTE: Requires ADC_KEYPAD_PIN to be assigned to an analog pin.
-                                  // which scrambles the display.  Pressing any button clears it up.
+ * This LCD is known to be susceptible to electrical interference which
-                                  // This is a LCD2004 display with 5 analog buttons.
+ * scrambles the display. Press any button to clear it up.
+ */
+//#define ZONESTAR_LCD
 
 //
 // Generic 16x2, 16x4, 20x2, or 20x4 character-based LCD.
@@ -3169,14 +3198,14 @@
 //
 // Tiny, but very sharp OLED display
 //
-//#define MKS_12864OLED          // Uses the SH1106 controller (default)
+//#define MKS_12864OLED          // Uses the SH1106 controller
 //#define MKS_12864OLED_SSD1306  // Uses the SSD1306 controller
 
 //
 // Zonestar OLED 128×64 Full Graphics Controller
 //
 //#define ZONESTAR_12864LCD           // Graphical (DOGM) with ST7920 controller
-//#define ZONESTAR_12864OLED          // 1.3" OLED with SH1106 controller (default)
+//#define ZONESTAR_12864OLED          // 1.3" OLED with SH1106 controller
 //#define ZONESTAR_12864OLED_SSD1306  // 0.96" OLED with SSD1306 controller
 
 //
@@ -3254,7 +3283,7 @@
 #endif
 
 //
-// Touch-screen LCD for Malyan M200/M300 printers
+// LCD for Malyan M200/M300 printers
 //
 //#define MALYAN_LCD
 
@@ -3425,7 +3454,7 @@
 
 #if ENABLED(TFT_COLOR_UI)
   /**
-   * TFT Font for Color_UI. Choose one of the following:
+   * TFT Font for Color UI. Choose one of the following:
    *
    * NOTOSANS  - Default font with anti-aliasing. Supports Latin Extended and non-Latin characters.
    * UNIFONT   - Lightweight font, no anti-aliasing. Supports Latin Extended and non-Latin characters.
@@ -3434,7 +3463,7 @@
   #define TFT_FONT  NOTOSANS
 
   /**
-   * TFT Theme for Color_UI. Choose one of the following or add a new one to 'Marlin/src/lcd/tft/themes' directory
+   * TFT Theme for Color UI. Choose one of the following or add a new one to 'Marlin/src/lcd/tft/themes' directory
    *
    * BLUE_MARLIN  - Default theme with 'midnight blue' background
    * BLACK_MARLIN - Theme with 'black' background
@@ -3458,6 +3487,8 @@
  *   TFT_ROTATE_180, TFT_ROTATE_180_MIRROR_X, TFT_ROTATE_180_MIRROR_Y,
  *   TFT_ROTATE_270, TFT_ROTATE_270_MIRROR_X, TFT_ROTATE_270_MIRROR_Y,
  *   TFT_MIRROR_X, TFT_MIRROR_Y, TFT_NO_ROTATION
+ *
+ * :{ 'TFT_NO_ROTATION':'None', 'TFT_ROTATE_90':'90°', 'TFT_ROTATE_90_MIRROR_X':'90° (Mirror X)', 'TFT_ROTATE_90_MIRROR_Y':'90° (Mirror Y)', 'TFT_ROTATE_180':'180°', 'TFT_ROTATE_180_MIRROR_X':'180° (Mirror X)', 'TFT_ROTATE_180_MIRROR_Y':'180° (Mirror Y)', 'TFT_ROTATE_270':'270°', 'TFT_ROTATE_270_MIRROR_X':'270° (Mirror X)', 'TFT_ROTATE_270_MIRROR_Y':'270° (Mirror Y)', 'TFT_MIRROR_X':'Mirror X', 'TFT_MIRROR_Y':'Mirror Y' }
  */
 //#define TFT_ROTATION TFT_NO_ROTATION
 
@@ -3508,7 +3539,9 @@
 // https://reprapworld.com/products/electronics/ramps/keypad_v1_0_fully_assembled/
 //
 //#define REPRAPWORLD_KEYPAD
-//#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
+#if ENABLED(REPRAPWORLD_KEYPAD)
+  //#define REPRAPWORLD_KEYPAD_MOVE_STEP 10.0 // (mm) Distance to move per key-press
+#endif
 
 //
 // EasyThreeD ET-4000+ with button input and status LED
@@ -3525,22 +3558,26 @@
 // :[1,2,3,4,5,6,7,8]
 //#define NUM_M106_FANS 1
 
-// Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
+/**
-// which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+ * Use software PWM to drive the fan, as for the heaters. This uses a very low frequency
-// is too low, you should also increment SOFT_PWM_SCALE.
+ * which is not as annoying as with the hardware PWM. On the other hand, if this frequency
+ * is too low, you should also increment SOFT_PWM_SCALE.
+ */
 //#define FAN_SOFT_PWM
 
-// Incrementing this by 1 will double the software PWM frequency,
+/**
-// affecting heaters, and the fan if FAN_SOFT_PWM is enabled.
+ * Incrementing this by 1 will double the software PWM frequency, affecting heaters, and
-// However, control resolution will be halved for each increment;
+ * the fan if FAN_SOFT_PWM is enabled. However, control resolution will be halved for each
-// at zero value, there are 128 effective control positions.
+ * increment; at zero value, there are 128 effective control positions.
-// :[0,1,2,3,4,5,6,7]
+ * :[0,1,2,3,4,5,6,7]
+ */
 #define SOFT_PWM_SCALE 0
 
-// If SOFT_PWM_SCALE is set to a value higher than 0, dithering can
+/**
-// be used to mitigate the associated resolution loss. If enabled,
+ * If SOFT_PWM_SCALE is set to a value higher than 0, dithering can be used to mitigate the
-// some of the PWM cycles are stretched so on average the desired
+ * associated resolution loss. If enabled, some of the PWM cycles are stretched so on average
-// duty cycle is attained.
+ * the desired duty cycle is attained.
+ */
 //#define SOFT_PWM_DITHER
 
 // @section extras
@@ -3550,9 +3587,11 @@
 
 // @section lights
 
-// Temperature status LEDs that display the hotend and bed temperature.
+/**
-// If all hotends, bed temperature, and target temperature are under 54C
+ * Temperature status LEDs that display the hotend and bed temperature.
-// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+ * If all hotends, bed temperature, and target temperature are under 54C
+ * the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
+ */
 //#define TEMP_STAT_LEDS
 
 // Support for BlinkM/CyzRgb

Marlin/Configuration_adv.h

@@ -174,9 +174,10 @@
  * Thermocouple Options — for MAX6675 (-2), MAX31855 (-3), and MAX31865 (-5).
  */
 //#define TEMP_SENSOR_FORCE_HW_SPI                // Ignore SCK/MOSI/MISO pins; use CS and the default SPI bus.
-//#define MAX31865_SENSOR_WIRES_0 2               // (2-4) Number of wires for the probe connected to a MAX31865 board.
+//#define MAX31865_SENSOR_WIRES_0   2             // (2-4) Number of wires for the probe connected to a MAX31865 board.
-//#define MAX31865_SENSOR_WIRES_1 2
+//#define MAX31865_SENSOR_WIRES_1   2
-//#define MAX31865_SENSOR_WIRES_2 2
+//#define MAX31865_SENSOR_WIRES_2   2
+//#define MAX31865_SENSOR_WIRES_BED 2
 
 //#define MAX31865_50HZ_FILTER                    // Use a 50Hz filter instead of the default 60Hz.
 //#define MAX31865_USE_READ_ERROR_DETECTION       // Treat value spikes (20°C delta in under 1s) as read errors.
@@ -188,6 +189,7 @@
 //#define MAX31865_WIRE_OHMS_0              0.95f // For 2-wire, set the wire resistances for more accurate readings.
 //#define MAX31865_WIRE_OHMS_1              0.0f
 //#define MAX31865_WIRE_OHMS_2              0.0f
+//#define MAX31865_WIRE_OHMS_BED            0.0f
 
 /**
  * Hephestos 2 24V heated bed upgrade kit.
@@ -211,18 +213,19 @@
 //
 // Heated Chamber options
 //
-#if DISABLED(PIDTEMPCHAMBER)
-  #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(CHAMBER_LIMIT_SWITCHING)
-    #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
-  #endif
-#endif
 
 #if TEMP_SENSOR_CHAMBER
   //#define HEATER_CHAMBER_PIN      P2_04   // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
   //#define HEATER_CHAMBER_INVERTING false
   //#define FAN1_PIN                   -1   // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
 
+  #if DISABLED(PIDTEMPCHAMBER)
+    #define CHAMBER_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
+    #if ENABLED(CHAMBER_LIMIT_SWITCHING)
+      #define CHAMBER_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
+    #endif
+  #endif
+
   //#define CHAMBER_FAN               // Enable a fan on the chamber
   #if ENABLED(CHAMBER_FAN)
     //#define CHAMBER_FAN_INDEX   2   // Index of a fan to repurpose as the chamber fan. (Default: first unused fan)
@@ -1019,7 +1022,7 @@
 
 #endif // BLTOUCH
 
-// @section calibration
+// @section calibrate
 
 /**
  * Z Steppers Auto-Alignment
@@ -1260,8 +1263,8 @@
 #define DISABLE_IDLE_E    // Shut down all idle extruders
 
 // Default Minimum Feedrates for printing and travel moves
-#define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s. °/s for rotational-only moves) Minimum feedrate. Set with M205 S.
+#define DEFAULT_MINIMUMFEEDRATE       0.0     // (mm/s) Minimum feedrate. Set with M205 S.
-#define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s. °/s for rotational-only moves) Minimum travel feedrate. Set with M205 T.
+#define DEFAULT_MINTRAVELFEEDRATE     0.0     // (mm/s) Minimum travel feedrate. Set with M205 T.
 
 // Minimum time that a segment needs to take as the buffer gets emptied
 #define DEFAULT_MINSEGMENTTIME        20000   // (µs) Set with M205 B.
@@ -1339,20 +1342,20 @@
   //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
   //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"
 
-  #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
+  #define CALIBRATION_FEEDRATE_SLOW             60    // (mm/min)
-  #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
+  #define CALIBRATION_FEEDRATE_FAST           1200    // (mm/min)
-  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
+  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // (mm/min)
 
   // The following parameters refer to the conical section of the nozzle tip.
-  #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
+  #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // (mm)
-  #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // mm
+  #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // (mm)
 
   // Uncomment to enable reporting (required for "G425 V", but consumes flash).
   //#define CALIBRATION_REPORTING
 
   // The true location and dimension the cube/bolt/washer on the bed.
-  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // mm
+  #define CALIBRATION_OBJECT_CENTER     { 264.0, -22.0,  -2.0 } // (mm)
-  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // mm
+  #define CALIBRATION_OBJECT_DIMENSIONS {  10.0,  10.0,  10.0 } // (mm)
 
   // Comment out any sides which are unreachable by the probe. For best
   // auto-calibration results, all sides must be reachable.
@@ -1416,24 +1419,24 @@
 #define MICROSTEP_MODES { 16, 16, 16, 16, 16, 16 } // [1,2,4,8,16]
 
 /**
- *  @section  stepper motor current
+ * @section stepper motor current
  *
- *  Some boards have a means of setting the stepper motor current via firmware.
+ * Some boards have a means of setting the stepper motor current via firmware.
  *
- *  The power on motor currents are set by:
+ * The power on motor currents are set by:
- *    PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
+ *   PWM_MOTOR_CURRENT - used by MINIRAMBO & ULTIMAIN_2
- *                         known compatible chips: A4982
+ *                        known compatible chips: A4982
- *    DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
+ *   DIGIPOT_MOTOR_CURRENT - used by BQ_ZUM_MEGA_3D, RAMBO & SCOOVO_X9H
- *                         known compatible chips: AD5206
+ *                        known compatible chips: AD5206
- *    DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
+ *   DAC_MOTOR_CURRENT_DEFAULT - used by PRINTRBOARD_REVF & RIGIDBOARD_V2
- *                         known compatible chips: MCP4728
+ *                        known compatible chips: MCP4728
- *    DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
+ *   DIGIPOT_I2C_MOTOR_CURRENTS - used by 5DPRINT, AZTEEG_X3_PRO, AZTEEG_X5_MINI_WIFI, MIGHTYBOARD_REVE
- *                         known compatible chips: MCP4451, MCP4018
+ *                        known compatible chips: MCP4451, MCP4018
  *
- *  Motor currents can also be set by M907 - M910 and by the LCD.
+ * Motor currents can also be set by M907 - M910 and by the LCD.
- *    M907 - applies to all.
+ *   M907 - applies to all.
- *    M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
+ *   M908 - BQ_ZUM_MEGA_3D, RAMBO, PRINTRBOARD_REVF, RIGIDBOARD_V2 & SCOOVO_X9H
- *    M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
+ *   M909, M910 & LCD - only PRINTRBOARD_REVF & RIGIDBOARD_V2
  */
 //#define PWM_MOTOR_CURRENT { 1300, 1300, 1250 }          // Values in milliamps
 //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
@@ -1548,6 +1551,7 @@
   //#define LCD_INFO_MENU
   #if ENABLED(LCD_INFO_MENU)
     //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
+    //#define BUILD_INFO_MENU_ITEM           // Add a menu item to display the build date and time
   #endif
 
   /**
@@ -1615,6 +1619,10 @@
   //#define SOUND_MENU_ITEM   // Add a mute option to the LCD menu
   #define SOUND_ON_DEFAULT    // Buzzer/speaker default enabled state
 
+  #if ENABLED(U8GLIB_SSD1309)
+    //#define LCD_DOUBLE_BUFFER           // Optimize display updates. Costs ~1K of SRAM.
+  #endif
+
   #if HAS_WIRED_LCD
     //#define DOUBLE_LCD_FRAMERATE        // Not recommended for slow boards.
   #endif
@@ -1866,7 +1874,7 @@
    *
    *    SCLK, MOSI, MISO --> SCLK, MOSI, MISO
    *    INT              --> SD_DETECT_PIN [1]
-   *    SS               --> SDSS
+   *    SS               --> SD_SS_PIN
    *
    * [1] On AVR an interrupt-capable pin is best for UHS3 compatibility.
    */
@@ -1893,7 +1901,7 @@
     //#define USE_OTG_USB_HOST
 
     #if DISABLED(USE_OTG_USB_HOST)
-      #define USB_CS_PIN    SDSS
+      #define USB_CS_PIN    SD_SS_PIN
       #define USB_INTR_PIN  SD_DETECT_PIN
     #endif
   #endif
@@ -1952,8 +1960,8 @@
   #if ENABLED(MULTI_VOLUME)
     #define VOLUME_SD_ONBOARD
     #define VOLUME_USB_FLASH_DRIVE
-    #define DEFAULT_VOLUME SV_SD_ONBOARD
+    #define DEFAULT_VOLUME        SD_ONBOARD       // :[ 'SD_ONBOARD', 'USB_FLASH_DRIVE' ]
-    #define DEFAULT_SHARED_VOLUME SV_USB_FLASH_DRIVE
+    #define DEFAULT_SHARED_VOLUME USB_FLASH_DRIVE  // :[ 'SD_ONBOARD', 'USB_FLASH_DRIVE' ]
   #endif
 
 #endif // HAS_MEDIA
@@ -2004,7 +2012,7 @@
   #if IS_U8GLIB_ST7920
     // Enable this option and reduce the value to optimize screen updates.
     // The normal delay is 10µs. Use the lowest value that still gives a reliable display.
-    //#define DOGM_SPI_DELAY_US 5
+    //#define DOGM_SPI_DELAY_US      5  // (µs) Delay after each SPI transfer
 
     //#define LIGHTWEIGHT_UI
     #if ENABLED(LIGHTWEIGHT_UI)
@@ -2034,17 +2042,17 @@
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
   //#define STATUS_HEAT_POWER         // Show heater output power as a vertical bar
 
-  // Frivolous Game Options
-  //#define MARLIN_BRICKOUT
-  //#define MARLIN_INVADERS
-  //#define MARLIN_SNAKE
-  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
-
 #endif // HAS_MARLINUI_U8GLIB
 
 #if HAS_MARLINUI_U8GLIB || IS_DWIN_MARLINUI
   #define MENU_HOLLOW_FRAME           // Enable to save many cycles by drawing a hollow frame on Menu Screens
   //#define OVERLAY_GFX_REVERSE       // Swap the CW/CCW indicators in the graphics overlay
+
+  // Frivolous Game Options
+  //#define MARLIN_BRICKOUT
+  //#define MARLIN_INVADERS
+  //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 #endif
 
 //
@@ -2223,7 +2231,7 @@
 
   // Developer menu (accessed by touching "About Printer" copyright text)
   //#define TOUCH_UI_DEVELOPER_MENU
-#endif
+#endif // TOUCH_UI_FTDI_EVE
 
 //
 // Classic UI Options
@@ -2257,9 +2265,11 @@
 // ADC Button Debounce
 //
 #if HAS_ADC_BUTTONS
-  #define ADC_BUTTON_DEBOUNCE_DELAY 16  // Increase if buttons bounce or repeat too fast
+  #define ADC_BUTTON_DEBOUNCE_DELAY 16  // (count) Increase if buttons bounce or repeat too fast
 #endif
 
+//#define FAST_BUTTON_POLLING           // Poll buttons at ~1kHz on 8-bit AVR. Set to 'false' for slow polling on 32-bit.
+
 // @section safety
 
 /**
@@ -2298,7 +2308,7 @@
 
   //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
   #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
-    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
+    #define DOUBLECLICK_MAX_INTERVAL 1250   // (ms) Maximum interval between clicks.
                                             // Note: Extra time may be added to mitigate controller latency.
     //#define MOVE_Z_WHEN_IDLE              // Jump to the move Z menu on double-click when printer is idle.
     #if ENABLED(MOVE_Z_WHEN_IDLE)
@@ -2342,6 +2352,24 @@
   //#define ADVANCE_K_EXTRA       // Add a second linear advance constant, configurable with M900 L.
   //#define LA_DEBUG              // Print debug information to serial during operation. Disable for production use.
   //#define EXPERIMENTAL_I2S_LA   // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
+
+  //#define SMOOTH_LIN_ADVANCE    // Remove limits on acceleration by gradual increase of nozzle pressure
+  #if ENABLED(SMOOTH_LIN_ADVANCE)
+    /**
+     * ADVANCE_TAU is also the time ahead that the smoother needs to look
+     * into the planner, so the planner needs to have enough blocks loaded.
+     * For k=0.04 at 10k acceleration and an "Orbiter 2" extruder it can be as low as 0.0075.
+     * Adjust by lowering the value until you observe the extruder skipping, then raise slightly.
+     * Higher k and higher XY acceleration may require larger ADVANCE_TAU to avoid skipping steps.
+     */
+    #if ENABLED(DISTINCT_E_FACTORS)
+      #define ADVANCE_TAU { 0.01 }   // (s) Smoothing time to reduce extruder acceleration, per extruder
+    #else
+      #define ADVANCE_TAU 0.01       // (s) Smoothing time to reduce extruder acceleration
+    #endif
+    #define SMOOTH_LIN_ADV_HZ 5000   // (Hz) How often to update extruder speed
+    #define INPUT_SHAPING_E_SYNC     // Synchronize the extruder-shaped XY axes (to increase precision)
+  #endif
 #endif
 
 /**
@@ -2630,19 +2658,23 @@
 #define MAX_CMD_SIZE 96
 #define BUFSIZE 4
 
-// Transmission to Host Buffer Size
+/**
-// To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
+ * Host Transmit Buffer Size
-// To buffer a simple "ok" you need 4 bytes.
+ *  - Costs 386 bytes of flash and TX_BUFFER_SIZE+3 bytes of SRAM (if not 0).
-// For ADVANCED_OK (M105) you need 32 bytes.
+ *  - 4 bytes required to buffer a simple "ok".
-// For debug-echo: 128 bytes for the optimal speed.
+ *  - 32 bytes for ADVANCED_OK (M105).
-// Other output doesn't need to be that speedy.
+ *  - 128 bytes for the optimal speed of 'debug-echo:'
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+ *  - Other output doesn't need to be that speedy.
+ * :[0, 2, 4, 8, 16, 32, 64, 128, 256]
+ */
 #define TX_BUFFER_SIZE 0
 
-// Host Receive Buffer Size
+/**
-// Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
+ * Host Receive Buffer Size
-// To use flow control, set this buffer size to at least 1024 bytes.
+ * Without XON/XOFF flow control (see SERIAL_XON_XOFF below) 32 bytes should be enough.
-// :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+ * To use flow control, set this buffer size to at least 1024 bytes.
+ * :[0, 2, 4, 8, 16, 32, 64, 128, 256, 512, 1024, 2048]
+ */
 //#define RX_BUFFER_SIZE 1024
 
 #if RX_BUFFER_SIZE >= 1024
@@ -2983,6 +3015,8 @@
 
   #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current
 
+  //#define EDITABLE_HOMING_CURRENT   // Add a G-code and menu to modify the Homing Current
+
   /**
    * Interpolate microsteps to 256
    * Override for each driver with <driver>_INTERPOLATE settings below
@@ -3668,6 +3702,8 @@
       #define SPEED_POWER_MIN          5000    // (RPM)
       #define SPEED_POWER_MAX         30000    // (RPM) SuperPID router controller 0 - 30,000 RPM
       #define SPEED_POWER_STARTUP     25000    // (RPM) M3/M4 speed/power default (with no arguments)
+
+      //#define DEFAULT_ACCELERATION_SPINDLE   1000 // (°/s/s) Default spindle acceleration (speed change with time)
     #endif
 
   #else
@@ -3909,7 +3945,7 @@
 /**
  * Extra options for the M114 "Current Position" report
  */
-//#define M114_DETAIL         // Use 'M114` for details to check planner calculations
+//#define M114_DETAIL         // Use 'M114 D' for details to check planner calculations
 //#define M114_REALTIME       // Real current position based on forward kinematics
 //#define M114_LEGACY         // M114 used to synchronize on every call. Enable if needed.
 
@@ -3956,7 +3992,6 @@
  * Spend 28 bytes of SRAM to optimize the G-code parser
  */
 #define FASTER_GCODE_PARSER
-
 #if ENABLED(FASTER_GCODE_PARSER)
   //#define GCODE_QUOTED_STRINGS  // Support for quoted string parameters
 #endif

Marlin/Makefile

@@ -127,9 +127,9 @@ NEOPIXEL           ?= 0
 # on GCC versions:
 #   https://www.avrfreaks.net/comment/1789106#comment-1789106
 
-CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d\ )
+CC_MAJ:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC__ | cut -f3 -d' ' )
-CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d\ )
+CC_MIN:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_MINOR__ | cut -f3 -d' ' )
-CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d\ )
+CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | cut -f3 -d' ' )
 CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
 ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
   $(warning This GCC version $(CC_VER) is likely broken. Enabling relocation workaround.)
@@ -868,8 +868,8 @@ else ifeq ($(HARDWARE_VARIANT), archim)
 endif
 
 # Add all the source directories as include directories too
-CINCS = ${addprefix -I ,${VPATH}}
+CINCS = ${addprefix -I, ${VPATH}}
-CXXINCS = ${addprefix -I ,${VPATH}}
+CXXINCS = ${addprefix -I, ${VPATH}}
 
 # Silence warnings for library code (won't work for .h files, unfortunately)
 LIBWARN = -w -Wno-packed-bitfield-compat
@@ -1026,7 +1026,7 @@ extcoff: $(TARGET).elf
 	$(NM) -n $< > $@
 
 # Link: create ELF output file from library.
-
+LDFLAGS+= -Wl,-V
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"
 	$P $(CXX) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)

Marlin/Version.h

@@ -41,7 +41,14 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2024-10-17"
+//#define STRING_DISTRIBUTION_DATE "2025-05-02"
+
+/**
+ * The protocol for communication to the host. Protocol indicates communication
+ * standards such as the use of ASCII, "echo:" and "error:" line prefixes, etc.
+ * (Other behaviors are given by the firmware version and capabilities report.)
+ */
+//#define PROTOCOL_VERSION "1.0"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -68,8 +75,8 @@
 //#define WEBSITE_URL "marlinfw.org"
 
 /**
- * Set the vendor info the serial USB interface, if changable
+ * Set the vendor info the serial USB interface, if changeable.
- * Currently only supported by DUE platform
+ * Currently only supported by DUE platform.
  */
 //#define USB_DEVICE_VENDOR_ID           0x0000
 //#define USB_DEVICE_PRODUCT_ID          0x0000

Marlin/config.ini

@@ -62,6 +62,11 @@ motherboard                              = BOARD_RAMPS_14_EFB
 serial_port                              = 0
 baudrate                                 = 250000
 
+string_config_h_author                   = "(default from config.ini)"
+
+capabilities_report                      = on
+extended_capabilities_report             = on
+
 use_watchdog                             = on
 thermal_protection_hotends               = on
 thermal_protection_hysteresis            = 4
@@ -77,9 +82,7 @@ temp_sensor_0                            = 1
 temp_hysteresis                          = 3
 heater_0_mintemp                         = 5
 heater_0_maxtemp                         = 275
-preheat_1_temp_hotend                    = 180
 
-bang_max                                 = 255
 pidtemp                                  = on
 pid_k1                                   = 0.95
 pid_max                                  = 255
@@ -89,6 +92,14 @@ default_kp                               = 22.20
 default_ki                               = 1.08
 default_kd                               = 114.00
 
+temp_sensor_bed                          = 1
+bed_mintemp                              = 5
+bed_maxtemp                              = 150
+
+thermal_protection_bed                   = on
+thermal_protection_bed_hysteresis        = 2
+thermal_protection_bed_period            = 20
+
 x_driver_type                            = A4988
 y_driver_type                            = A4988
 z_driver_type                            = A4988
@@ -121,10 +132,10 @@ default_max_acceleration                 = { 3000, 3000, 100, 10000 }
 homing_feedrate_mm_m                     = { (50*60), (50*60), (4*60) }
 homing_bump_divisor                      = { 2, 2, 4 }
 
-x_enable_on                              = 0
+x_enable_on                              = LOW
-y_enable_on                              = 0
+y_enable_on                              = LOW
-z_enable_on                              = 0
+z_enable_on                              = LOW
-e_enable_on                              = 0
+e_enable_on                              = LOW
 
 invert_x_dir                             = false
 invert_y_dir                             = true
@@ -136,11 +147,6 @@ step_state_x                             = HIGH
 step_state_y                             = HIGH
 step_state_z                             = HIGH
 
-disable_x                                = off
-disable_y                                = off
-disable_z                                = off
-disable_e                                = off
-
 proportional_font_ratio                  = 1.0
 default_nominal_filament_dia             = 1.75
 
@@ -153,18 +159,13 @@ default_retract_acceleration             = 3000
 default_minimumfeedrate                  = 0.0
 default_mintravelfeedrate                = 0.0
 
-minimum_planner_speed                    = 0.05
 min_steps_per_segment                    = 6
 default_minsegmenttime                   = 20000
 
 [config:basic]
 bed_overshoot                            = 10
 busy_while_heating                       = on
-default_ejerk                            = 5.0
 default_keepalive_interval               = 2
-default_leveling_fade_height             = 0.0
-disable_other_extruders                  = on
-display_charset_hd44780                  = JAPANESE
 eeprom_boot_silent                       = on
 eeprom_chitchat                          = on
 endstoppullups                           = on
@@ -173,10 +174,8 @@ extrude_mintemp                          = 170
 host_keepalive_feature                   = on
 hotend_overshoot                         = 15
 jd_handle_small_segments                 = on
-lcd_info_screen_style                    = 0
-lcd_language                             = en
 max_bed_power                            = 255
-mesh_inset                               = 0
+
 min_software_endstops                    = on
 max_software_endstops                    = on
 min_software_endstop_x                   = on
@@ -185,50 +184,48 @@ min_software_endstop_z                   = on
 max_software_endstop_x                   = on
 max_software_endstop_y                   = on
 max_software_endstop_z                   = on
-preheat_1_fan_speed                      = 0
+
 preheat_1_label                          = "PLA"
+preheat_1_temp_hotend                    = 180
 preheat_1_temp_bed                       = 70
+preheat_1_fan_speed                      = 0
+
+preheat_2_label                          = "ABS"
+preheat_2_temp_hotend                    = 240
+preheat_2_temp_bed                       = 110
+preheat_2_fan_speed                      = 0
+
 prevent_cold_extrusion                   = on
 prevent_lengthy_extrude                  = on
 printjob_timer_autostart                 = on
-probing_margin                           = 10
+
-show_bootscreen                          = on
-soft_pwm_scale                           = 0
-string_config_h_author                   = "(none, default config)"
 temp_bed_hysteresis                      = 3
 temp_bed_residency_time                  = 10
 temp_bed_window                          = 1
 temp_residency_time                      = 10
 temp_window                              = 1
 validate_homing_endstops                 = on
-xy_probe_feedrate                        = (133*60)
+
-z_clearance_between_probes               = 5
+editable_steps_per_unit                  = on
-z_clearance_deploy_probe                 = 10
-z_clearance_multi_probe                  = 5
 
 [config:advanced]
 arc_support                              = on
 auto_report_temperatures                 = on
+
 autotemp                                 = on
+autotemp_min                             = 210
+autotemp_max                             = 250
+autotemp_factor                          = 0.1f
 autotemp_oldweight                       = 0.98
-bed_check_interval                       = 5000
+
 default_stepper_timeout_sec              = 120
-default_volumetric_extruder_limit        = 0.00
 disable_idle_x                           = on
 disable_idle_y                           = on
 disable_idle_z                           = on
 disable_idle_e                           = on
 e0_auto_fan_pin                          = -1
-encoder_100x_steps_per_sec               = 80
-encoder_10x_steps_per_sec                = 30
-encoder_rate_multiplier                  = on
-extended_capabilities_report             = on
-extruder_auto_fan_speed                  = 255
-extruder_auto_fan_temperature            = 50
-fanmux0_pin                              = -1
-fanmux1_pin                              = -1
-fanmux2_pin                              = -1
 faster_gcode_parser                      = on
+debug_flags_gcode                        = on
 homing_bump_mm                           = { 5, 5, 2 }
 max_arc_segment_mm                       = 1.0
 min_arc_segment_mm                       = 0.1
@@ -237,11 +234,11 @@ n_arc_correction                         = 25
 serial_overrun_protection                = on
 slowdown                                 = on
 slowdown_divisor                         = 2
-temp_sensor_bed                          = 0
-thermal_protection_bed_hysteresis        = 2
-thermocouple_max_errors                  = 15
 tx_buffer_size                           = 0
+
+bed_check_interval                       = 5000
 watch_bed_temp_increase                  = 2
 watch_bed_temp_period                    = 60
+
 watch_temp_increase                      = 2
-watch_temp_period                        = 20
+watch_temp_period                        = 40

Marlin/src/HAL/AVR/HAL.h

@@ -204,7 +204,7 @@ public:
   static void isr_on()  { sei(); }
   static void isr_off() { cli(); }
 
-  static void delay_ms(const int ms) { _delay_ms(ms); }
+  static void delay_ms(const int ms) { delay(ms); }
 
   // Tasks, called from idle()
   static void idletask() {}

Marlin/src/HAL/AVR/fastio/fastio_AT90USB.h

@@ -363,8 +363,11 @@
 #define AIO7_PWM    0
 #define AIO7_DDR    DDRF
 
-//-- Begin not supported by Teensyduino
+//-- 46-47 are not supported by Teensyduino
-//-- don't use Arduino functions on these pins pinMode/digitalWrite/etc
+//-- Don't use Arduino functions (pinMode, digitalWrite, etc.) on these pins
+#define PIN_E2   46
+#define PIN_E3   47
+
 #define DIO46_PIN   PINE2
 #define DIO46_RPORT PINE
 #define DIO46_WPORT PORTE
@@ -377,10 +380,7 @@
 #define DIO47_PWM   0
 #define DIO47_DDR   DDRE
 
-#define TEENSY_E2   46
+//--
-#define TEENSY_E3   47
-
-//-- end not supported by Teensyduino
 
 #undef PA0
 #define PA0_PIN     PINA0

Marlin/src/HAL/AVR/pinsDebug.h

@@ -22,7 +22,23 @@
 #pragma once
 
 /**
- * PWM print routines for Atmel 8 bit AVR CPUs
+ * Pins Debugging for Atmel 8 bit AVR CPUs
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
  */
 
 #include "../../inc/MarlinConfig.h"
@@ -39,30 +55,30 @@
   #include "pinsDebug_Teensyduino.h"
   // Can't use the "digitalPinToPort" function from the Teensyduino type IDEs
   // portModeRegister takes a different argument
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
-  #define getValidPinMode(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+  #define getValidPinMode(P) (*portModeRegister(P) & digitalPinToBitMask_DEBUG(P))
 
 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70
 
   #include "pinsDebug_plus_70.h"
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer_plus_70(P)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask_plus_70(P)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort_plus_70(P)
   bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
 
 #else
 
-  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
+  #define digitalPinToTimer_DEBUG(P) digitalPinToTimer(P)
-  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
+  #define digitalPinToBitMask_DEBUG(P) digitalPinToBitMask(P)
-  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
+  #define digitalPinToPort_DEBUG(P) digitalPinToPort(P)
   bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)
+  #define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 
 #endif
 
-#define isValidPin(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define isValidPin(P) (P >= 0 && P < NUMBER_PINS_TOTAL)
 #if AVR_ATmega1284_FAMILY
   #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
   #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
@@ -72,11 +88,11 @@
   #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
   #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)
+#define getPinByIndex(x) pgm_read_byte(&pin_array[x].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin
 
-void printPinNameByIndex(uint8_t x) {
+void printPinNameByIndex(const uint8_t index) {
-  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
+  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[index].name);
   for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
     char temp_char = pgm_read_byte(name_mem_pointer + y);
     if (temp_char != 0)
@@ -109,7 +125,7 @@ void printPinNameByIndex(uint8_t x) {
  * Print a pin's PWM status.
  * Return true if it's currently a PWM pin.
  */
-bool pwm_status(uint8_t pin) {
+bool pwm_status(const uint8_t pin) {
   char buffer[20];   // for the sprintf statements
 
   switch (digitalPinToTimer_DEBUG(pin)) {
@@ -276,7 +292,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
   if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }
 
-void printPinPWM(uint8_t pin) {
+void printPinPWM(const uint8_t pin) {
   switch (digitalPinToTimer_DEBUG(pin)) {
 
     #if ABTEST(0)
@@ -361,16 +377,16 @@ void printPinPort(const pin_t pin) {   // print port number
     uint8_t x;
     SERIAL_ECHOPGM("  Port: ");
     #if AVR_AT90USB1286_FAMILY
-      x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64;
+      x = (pin == PIN_E2 || pin == PIN_E3) ? 'E' : 'A' + digitalPinToPort_DEBUG(pin) - 1;
     #else
-      x = digitalPinToPort_DEBUG(pin) + 64;
+      x = 'A' + digitalPinToPort_DEBUG(pin) - 1;
     #endif
     SERIAL_CHAR(x);
 
     #if AVR_AT90USB1286_FAMILY
-      if (pin == 46)
+      if (pin == PIN_E2)
         x = '2';
-      else if (pin == 47)
+      else if (pin == PIN_E3)
         x = '3';
       else {
         uint8_t temp = digitalPinToBitMask_DEBUG(pin);
@@ -386,7 +402,7 @@ void printPinPort(const pin_t pin) {   // print port number
   #endif
 }
 
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3d "), P); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
 
 #undef ABTEST

Marlin/src/HAL/AVR/pinsDebug_Teensyduino.h

@@ -102,7 +102,7 @@ const uint8_t PROGMEM digital_pin_to_port_PGM[] = {
 
 // digitalPinToBitMask(pin) is OK
 
-#define digitalRead_mod(p)  extDigitalRead(p)   // Teensyduino's version of digitalRead doesn't
+#define digitalRead_mod(P)  extDigitalRead(P)   // Teensyduino's version of digitalRead doesn't
                                                 // disable the PWMs so we can use it as is
 
 // portModeRegister(pin) is OK

Marlin/src/HAL/AVR/pinsDebug_plus_70.h

@@ -48,92 +48,92 @@
 const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = {
   // PORTLIST
   // ------------------------
-  PE  , // PE 0 ** 0 ** USART0_RX
+  PE, // PE 0 ** 0 ** USART0_RX
-  PE  , // PE 1 ** 1 ** USART0_TX
+  PE, // PE 1 ** 1 ** USART0_TX
-  PE  , // PE 4 ** 2 ** PWM2
+  PE, // PE 4 ** 2 ** PWM2
-  PE  , // PE 5 ** 3 ** PWM3
+  PE, // PE 5 ** 3 ** PWM3
-  PG  , // PG 5 ** 4 ** PWM4
+  PG, // PG 5 ** 4 ** PWM4
-  PE  , // PE 3 ** 5 ** PWM5
+  PE, // PE 3 ** 5 ** PWM5
-  PH  , // PH 3 ** 6 ** PWM6
+  PH, // PH 3 ** 6 ** PWM6
-  PH  , // PH 4 ** 7 ** PWM7
+  PH, // PH 4 ** 7 ** PWM7
-  PH  , // PH 5 ** 8 ** PWM8
+  PH, // PH 5 ** 8 ** PWM8
-  PH  , // PH 6 ** 9 ** PWM9
+  PH, // PH 6 ** 9 ** PWM9
-  PB  , // PB 4 ** 10 ** PWM10
+  PB, // PB 4 ** 10 ** PWM10
-  PB  , // PB 5 ** 11 ** PWM11
+  PB, // PB 5 ** 11 ** PWM11
-  PB  , // PB 6 ** 12 ** PWM12
+  PB, // PB 6 ** 12 ** PWM12
-  PB  , // PB 7 ** 13 ** PWM13
+  PB, // PB 7 ** 13 ** PWM13
-  PJ  , // PJ 1 ** 14 ** USART3_TX
+  PJ, // PJ 1 ** 14 ** USART3_TX
-  PJ  , // PJ 0 ** 15 ** USART3_RX
+  PJ, // PJ 0 ** 15 ** USART3_RX
-  PH  , // PH 1 ** 16 ** USART2_TX
+  PH, // PH 1 ** 16 ** USART2_TX
-  PH  , // PH 0 ** 17 ** USART2_RX
+  PH, // PH 0 ** 17 ** USART2_RX
-  PD  , // PD 3 ** 18 ** USART1_TX
+  PD, // PD 3 ** 18 ** USART1_TX
-  PD  , // PD 2 ** 19 ** USART1_RX
+  PD, // PD 2 ** 19 ** USART1_RX
-  PD  , // PD 1 ** 20 ** I2C_SDA
+  PD, // PD 1 ** 20 ** I2C_SDA
-  PD  , // PD 0 ** 21 ** I2C_SCL
+  PD, // PD 0 ** 21 ** I2C_SCL
-  PA  , // PA 0 ** 22 ** D22
+  PA, // PA 0 ** 22 ** D22
-  PA  , // PA 1 ** 23 ** D23
+  PA, // PA 1 ** 23 ** D23
-  PA  , // PA 2 ** 24 ** D24
+  PA, // PA 2 ** 24 ** D24
-  PA  , // PA 3 ** 25 ** D25
+  PA, // PA 3 ** 25 ** D25
-  PA  , // PA 4 ** 26 ** D26
+  PA, // PA 4 ** 26 ** D26
-  PA  , // PA 5 ** 27 ** D27
+  PA, // PA 5 ** 27 ** D27
-  PA  , // PA 6 ** 28 ** D28
+  PA, // PA 6 ** 28 ** D28
-  PA  , // PA 7 ** 29 ** D29
+  PA, // PA 7 ** 29 ** D29
-  PC  , // PC 7 ** 30 ** D30
+  PC, // PC 7 ** 30 ** D30
-  PC  , // PC 6 ** 31 ** D31
+  PC, // PC 6 ** 31 ** D31
-  PC  , // PC 5 ** 32 ** D32
+  PC, // PC 5 ** 32 ** D32
-  PC  , // PC 4 ** 33 ** D33
+  PC, // PC 4 ** 33 ** D33
-  PC  , // PC 3 ** 34 ** D34
+  PC, // PC 3 ** 34 ** D34
-  PC  , // PC 2 ** 35 ** D35
+  PC, // PC 2 ** 35 ** D35
-  PC  , // PC 1 ** 36 ** D36
+  PC, // PC 1 ** 36 ** D36
-  PC  , // PC 0 ** 37 ** D37
+  PC, // PC 0 ** 37 ** D37
-  PD  , // PD 7 ** 38 ** D38
+  PD, // PD 7 ** 38 ** D38
-  PG  , // PG 2 ** 39 ** D39
+  PG, // PG 2 ** 39 ** D39
-  PG  , // PG 1 ** 40 ** D40
+  PG, // PG 1 ** 40 ** D40
-  PG  , // PG 0 ** 41 ** D41
+  PG, // PG 0 ** 41 ** D41
-  PL  , // PL 7 ** 42 ** D42
+  PL, // PL 7 ** 42 ** D42
-  PL  , // PL 6 ** 43 ** D43
+  PL, // PL 6 ** 43 ** D43
-  PL  , // PL 5 ** 44 ** D44
+  PL, // PL 5 ** 44 ** D44
-  PL  , // PL 4 ** 45 ** D45
+  PL, // PL 4 ** 45 ** D45
-  PL  , // PL 3 ** 46 ** D46
+  PL, // PL 3 ** 46 ** D46
-  PL  , // PL 2 ** 47 ** D47
+  PL, // PL 2 ** 47 ** D47
-  PL  , // PL 1 ** 48 ** D48
+  PL, // PL 1 ** 48 ** D48
-  PL  , // PL 0 ** 49 ** D49
+  PL, // PL 0 ** 49 ** D49
-  PB  , // PB 3 ** 50 ** SPI_MISO
+  PB, // PB 3 ** 50 ** SPI_MISO
-  PB  , // PB 2 ** 51 ** SPI_MOSI
+  PB, // PB 2 ** 51 ** SPI_MOSI
-  PB  , // PB 1 ** 52 ** SPI_SCK
+  PB, // PB 1 ** 52 ** SPI_SCK
-  PB  , // PB 0 ** 53 ** SPI_SS
+  PB, // PB 0 ** 53 ** SPI_SS
-  PF  , // PF 0 ** 54 ** A0
+  PF, // PF 0 ** 54 ** A0
-  PF  , // PF 1 ** 55 ** A1
+  PF, // PF 1 ** 55 ** A1
-  PF  , // PF 2 ** 56 ** A2
+  PF, // PF 2 ** 56 ** A2
-  PF  , // PF 3 ** 57 ** A3
+  PF, // PF 3 ** 57 ** A3
-  PF  , // PF 4 ** 58 ** A4
+  PF, // PF 4 ** 58 ** A4
-  PF  , // PF 5 ** 59 ** A5
+  PF, // PF 5 ** 59 ** A5
-  PF  , // PF 6 ** 60 ** A6
+  PF, // PF 6 ** 60 ** A6
-  PF  , // PF 7 ** 61 ** A7
+  PF, // PF 7 ** 61 ** A7
-  PK  , // PK 0 ** 62 ** A8
+  PK, // PK 0 ** 62 ** A8
-  PK  , // PK 1 ** 63 ** A9
+  PK, // PK 1 ** 63 ** A9
-  PK  , // PK 2 ** 64 ** A10
+  PK, // PK 2 ** 64 ** A10
-  PK  , // PK 3 ** 65 ** A11
+  PK, // PK 3 ** 65 ** A11
-  PK  , // PK 4 ** 66 ** A12
+  PK, // PK 4 ** 66 ** A12
-  PK  , // PK 5 ** 67 ** A13
+  PK, // PK 5 ** 67 ** A13
-  PK  , // PK 6 ** 68 ** A14
+  PK, // PK 6 ** 68 ** A14
-  PK  , // PK 7 ** 69 ** A15
+  PK, // PK 7 ** 69 ** A15
-  PG  , // PG 4 ** 70 **
+  PG, // PG 4 ** 70 **
-  PG  , // PG 3 ** 71 **
+  PG, // PG 3 ** 71 **
-  PJ  , // PJ 2 ** 72 **
+  PJ, // PJ 2 ** 72 **
-  PJ  , // PJ 3 ** 73 **
+  PJ, // PJ 3 ** 73 **
-  PJ  , // PJ 7 ** 74 **
+  PJ, // PJ 7 ** 74 **
-  PJ  , // PJ 4 ** 75 **
+  PJ, // PJ 4 ** 75 **
-  PJ  , // PJ 5 ** 76 **
+  PJ, // PJ 5 ** 76 **
-  PJ  , // PJ 6 ** 77 **
+  PJ, // PJ 6 ** 77 **
-  PE  , // PE 2 ** 78 **
+  PE, // PE 2 ** 78 **
-  PE  , // PE 6 ** 79 **
+  PE, // PE 6 ** 79 **
-  PE  , // PE 7 ** 80 **
+  PE, // PE 7 ** 80 **
-  PD  , // PD 4 ** 81 **
+  PD, // PD 4 ** 81 **
-  PD  , // PD 5 ** 82 **
+  PD, // PD 5 ** 82 **
-  PD  , // PD 6 ** 83 **
+  PD, // PD 6 ** 83 **
-  PH  , // PH 2 ** 84 **
+  PH, // PH 2 ** 84 **
-  PH  , // PH 7 ** 85 **
+  PH, // PH 7 ** 85 **
 };
 
 #define digitalPinToPort_plus_70(P) ( pgm_read_byte( digital_pin_to_port_PGM_plus_70 + (P) ) )
@@ -141,92 +141,92 @@ const uint8_t PROGMEM digital_pin_to_port_PGM_plus_70[] = {
 const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
   // PIN IN PORT
   // ------------------------
-  _BV( 0 )  , // PE 0 ** 0 ** USART0_RX
+  _BV( 0 ), // PE 0 ** 0 ** USART0_RX
-  _BV( 1 )  , // PE 1 ** 1 ** USART0_TX
+  _BV( 1 ), // PE 1 ** 1 ** USART0_TX
-  _BV( 4 )  , // PE 4 ** 2 ** PWM2
+  _BV( 4 ), // PE 4 ** 2 ** PWM2
-  _BV( 5 )  , // PE 5 ** 3 ** PWM3
+  _BV( 5 ), // PE 5 ** 3 ** PWM3
-  _BV( 5 )  , // PG 5 ** 4 ** PWM4
+  _BV( 5 ), // PG 5 ** 4 ** PWM4
-  _BV( 3 )  , // PE 3 ** 5 ** PWM5
+  _BV( 3 ), // PE 3 ** 5 ** PWM5
-  _BV( 3 )  , // PH 3 ** 6 ** PWM6
+  _BV( 3 ), // PH 3 ** 6 ** PWM6
-  _BV( 4 )  , // PH 4 ** 7 ** PWM7
+  _BV( 4 ), // PH 4 ** 7 ** PWM7
-  _BV( 5 )  , // PH 5 ** 8 ** PWM8
+  _BV( 5 ), // PH 5 ** 8 ** PWM8
-  _BV( 6 )  , // PH 6 ** 9 ** PWM9
+  _BV( 6 ), // PH 6 ** 9 ** PWM9
-  _BV( 4 )  , // PB 4 ** 10 ** PWM10
+  _BV( 4 ), // PB 4 ** 10 ** PWM10
-  _BV( 5 )  , // PB 5 ** 11 ** PWM11
+  _BV( 5 ), // PB 5 ** 11 ** PWM11
-  _BV( 6 )  , // PB 6 ** 12 ** PWM12
+  _BV( 6 ), // PB 6 ** 12 ** PWM12
-  _BV( 7 )  , // PB 7 ** 13 ** PWM13
+  _BV( 7 ), // PB 7 ** 13 ** PWM13
-  _BV( 1 )  , // PJ 1 ** 14 ** USART3_TX
+  _BV( 1 ), // PJ 1 ** 14 ** USART3_TX
-  _BV( 0 )  , // PJ 0 ** 15 ** USART3_RX
+  _BV( 0 ), // PJ 0 ** 15 ** USART3_RX
-  _BV( 1 )  , // PH 1 ** 16 ** USART2_TX
+  _BV( 1 ), // PH 1 ** 16 ** USART2_TX
-  _BV( 0 )  , // PH 0 ** 17 ** USART2_RX
+  _BV( 0 ), // PH 0 ** 17 ** USART2_RX
-  _BV( 3 )  , // PD 3 ** 18 ** USART1_TX
+  _BV( 3 ), // PD 3 ** 18 ** USART1_TX
-  _BV( 2 )  , // PD 2 ** 19 ** USART1_RX
+  _BV( 2 ), // PD 2 ** 19 ** USART1_RX
-  _BV( 1 )  , // PD 1 ** 20 ** I2C_SDA
+  _BV( 1 ), // PD 1 ** 20 ** I2C_SDA
-  _BV( 0 )  , // PD 0 ** 21 ** I2C_SCL
+  _BV( 0 ), // PD 0 ** 21 ** I2C_SCL
-  _BV( 0 )  , // PA 0 ** 22 ** D22
+  _BV( 0 ), // PA 0 ** 22 ** D22
-  _BV( 1 )  , // PA 1 ** 23 ** D23
+  _BV( 1 ), // PA 1 ** 23 ** D23
-  _BV( 2 )  , // PA 2 ** 24 ** D24
+  _BV( 2 ), // PA 2 ** 24 ** D24
-  _BV( 3 )  , // PA 3 ** 25 ** D25
+  _BV( 3 ), // PA 3 ** 25 ** D25
-  _BV( 4 )  , // PA 4 ** 26 ** D26
+  _BV( 4 ), // PA 4 ** 26 ** D26
-  _BV( 5 )  , // PA 5 ** 27 ** D27
+  _BV( 5 ), // PA 5 ** 27 ** D27
-  _BV( 6 )  , // PA 6 ** 28 ** D28
+  _BV( 6 ), // PA 6 ** 28 ** D28
-  _BV( 7 )  , // PA 7 ** 29 ** D29
+  _BV( 7 ), // PA 7 ** 29 ** D29
-  _BV( 7 )  , // PC 7 ** 30 ** D30
+  _BV( 7 ), // PC 7 ** 30 ** D30
-  _BV( 6 )  , // PC 6 ** 31 ** D31
+  _BV( 6 ), // PC 6 ** 31 ** D31
-  _BV( 5 )  , // PC 5 ** 32 ** D32
+  _BV( 5 ), // PC 5 ** 32 ** D32
-  _BV( 4 )  , // PC 4 ** 33 ** D33
+  _BV( 4 ), // PC 4 ** 33 ** D33
-  _BV( 3 )  , // PC 3 ** 34 ** D34
+  _BV( 3 ), // PC 3 ** 34 ** D34
-  _BV( 2 )  , // PC 2 ** 35 ** D35
+  _BV( 2 ), // PC 2 ** 35 ** D35
-  _BV( 1 )  , // PC 1 ** 36 ** D36
+  _BV( 1 ), // PC 1 ** 36 ** D36
-  _BV( 0 )  , // PC 0 ** 37 ** D37
+  _BV( 0 ), // PC 0 ** 37 ** D37
-  _BV( 7 )  , // PD 7 ** 38 ** D38
+  _BV( 7 ), // PD 7 ** 38 ** D38
-  _BV( 2 )  , // PG 2 ** 39 ** D39
+  _BV( 2 ), // PG 2 ** 39 ** D39
-  _BV( 1 )  , // PG 1 ** 40 ** D40
+  _BV( 1 ), // PG 1 ** 40 ** D40
-  _BV( 0 )  , // PG 0 ** 41 ** D41
+  _BV( 0 ), // PG 0 ** 41 ** D41
-  _BV( 7 )  , // PL 7 ** 42 ** D42
+  _BV( 7 ), // PL 7 ** 42 ** D42
-  _BV( 6 )  , // PL 6 ** 43 ** D43
+  _BV( 6 ), // PL 6 ** 43 ** D43
-  _BV( 5 )  , // PL 5 ** 44 ** D44
+  _BV( 5 ), // PL 5 ** 44 ** D44
-  _BV( 4 )  , // PL 4 ** 45 ** D45
+  _BV( 4 ), // PL 4 ** 45 ** D45
-  _BV( 3 )  , // PL 3 ** 46 ** D46
+  _BV( 3 ), // PL 3 ** 46 ** D46
-  _BV( 2 )  , // PL 2 ** 47 ** D47
+  _BV( 2 ), // PL 2 ** 47 ** D47
-  _BV( 1 )  , // PL 1 ** 48 ** D48
+  _BV( 1 ), // PL 1 ** 48 ** D48
-  _BV( 0 )  , // PL 0 ** 49 ** D49
+  _BV( 0 ), // PL 0 ** 49 ** D49
-  _BV( 3 )  , // PB 3 ** 50 ** SPI_MISO
+  _BV( 3 ), // PB 3 ** 50 ** SPI_MISO
-  _BV( 2 )  , // PB 2 ** 51 ** SPI_MOSI
+  _BV( 2 ), // PB 2 ** 51 ** SPI_MOSI
-  _BV( 1 )  , // PB 1 ** 52 ** SPI_SCK
+  _BV( 1 ), // PB 1 ** 52 ** SPI_SCK
-  _BV( 0 )  , // PB 0 ** 53 ** SPI_SS
+  _BV( 0 ), // PB 0 ** 53 ** SPI_SS
-  _BV( 0 )  , // PF 0 ** 54 ** A0
+  _BV( 0 ), // PF 0 ** 54 ** A0
-  _BV( 1 )  , // PF 1 ** 55 ** A1
+  _BV( 1 ), // PF 1 ** 55 ** A1
-  _BV( 2 )  , // PF 2 ** 56 ** A2
+  _BV( 2 ), // PF 2 ** 56 ** A2
-  _BV( 3 )  , // PF 3 ** 57 ** A3
+  _BV( 3 ), // PF 3 ** 57 ** A3
-  _BV( 4 )  , // PF 4 ** 58 ** A4
+  _BV( 4 ), // PF 4 ** 58 ** A4
-  _BV( 5 )  , // PF 5 ** 59 ** A5
+  _BV( 5 ), // PF 5 ** 59 ** A5
-  _BV( 6 )  , // PF 6 ** 60 ** A6
+  _BV( 6 ), // PF 6 ** 60 ** A6
-  _BV( 7 )  , // PF 7 ** 61 ** A7
+  _BV( 7 ), // PF 7 ** 61 ** A7
-  _BV( 0 )  , // PK 0 ** 62 ** A8
+  _BV( 0 ), // PK 0 ** 62 ** A8
-  _BV( 1 )  , // PK 1 ** 63 ** A9
+  _BV( 1 ), // PK 1 ** 63 ** A9
-  _BV( 2 )  , // PK 2 ** 64 ** A10
+  _BV( 2 ), // PK 2 ** 64 ** A10
-  _BV( 3 )  , // PK 3 ** 65 ** A11
+  _BV( 3 ), // PK 3 ** 65 ** A11
-  _BV( 4 )  , // PK 4 ** 66 ** A12
+  _BV( 4 ), // PK 4 ** 66 ** A12
-  _BV( 5 )  , // PK 5 ** 67 ** A13
+  _BV( 5 ), // PK 5 ** 67 ** A13
-  _BV( 6 )  , // PK 6 ** 68 ** A14
+  _BV( 6 ), // PK 6 ** 68 ** A14
-  _BV( 7 )  , // PK 7 ** 69 ** A15
+  _BV( 7 ), // PK 7 ** 69 ** A15
-  _BV( 4 )  , // PG 4 ** 70 **
+  _BV( 4 ), // PG 4 ** 70 **
-  _BV( 3 )  , // PG 3 ** 71 **
+  _BV( 3 ), // PG 3 ** 71 **
-  _BV( 2 )  , // PJ 2 ** 72 **
+  _BV( 2 ), // PJ 2 ** 72 **
-  _BV( 3 )  , // PJ 3 ** 73 **
+  _BV( 3 ), // PJ 3 ** 73 **
-  _BV( 7 )  , // PJ 7 ** 74 **
+  _BV( 7 ), // PJ 7 ** 74 **
-  _BV( 4 )  , // PJ 4 ** 75 **
+  _BV( 4 ), // PJ 4 ** 75 **
-  _BV( 5 )  , // PJ 5 ** 76 **
+  _BV( 5 ), // PJ 5 ** 76 **
-  _BV( 6 )  , // PJ 6 ** 77 **
+  _BV( 6 ), // PJ 6 ** 77 **
-  _BV( 2 )  , // PE 2 ** 78 **
+  _BV( 2 ), // PE 2 ** 78 **
-  _BV( 6 )  , // PE 6 ** 79 **
+  _BV( 6 ), // PE 6 ** 79 **
-  _BV( 7 )  , // PE 7 ** 80 **
+  _BV( 7 ), // PE 7 ** 80 **
-  _BV( 4 )  , // PD 4 ** 81 **
+  _BV( 4 ), // PD 4 ** 81 **
-  _BV( 5 )  , // PD 5 ** 82 **
+  _BV( 5 ), // PD 5 ** 82 **
-  _BV( 6 )  , // PD 6 ** 83 **
+  _BV( 6 ), // PD 6 ** 83 **
-  _BV( 2 )  , // PH 2 ** 84 **
+  _BV( 2 ), // PH 2 ** 84 **
-  _BV( 7 )  , // PH 7 ** 85 **
+  _BV( 7 ), // PH 7 ** 85 **
 };
 
 #define digitalPinToBitMask_plus_70(P) ( pgm_read_byte( digital_pin_to_bit_mask_PGM_plus_70 + (P) ) )
@@ -234,86 +234,86 @@ const uint8_t PROGMEM digital_pin_to_bit_mask_PGM_plus_70[] = {
 const uint8_t PROGMEM digital_pin_to_timer_PGM_plus_70[] = {
   // TIMERS
   // ------------------------
-  NOT_ON_TIMER  , // PE 0 ** 0 ** USART0_RX
+  NOT_ON_TIMER, // PE 0 ** 0 ** USART0_RX
-  NOT_ON_TIMER  , // PE 1 ** 1 ** USART0_TX
+  NOT_ON_TIMER, // PE 1 ** 1 ** USART0_TX
-  TIMER3B , // PE 4 ** 2 ** PWM2
+  TIMER3B, // PE 4 ** 2 ** PWM2
-  TIMER3C , // PE 5 ** 3 ** PWM3
+  TIMER3C, // PE 5 ** 3 ** PWM3
-  TIMER0B , // PG 5 ** 4 ** PWM4
+  TIMER0B, // PG 5 ** 4 ** PWM4
-  TIMER3A , // PE 3 ** 5 ** PWM5
+  TIMER3A, // PE 3 ** 5 ** PWM5
-  TIMER4A , // PH 3 ** 6 ** PWM6
+  TIMER4A, // PH 3 ** 6 ** PWM6
-  TIMER4B , // PH 4 ** 7 ** PWM7
+  TIMER4B, // PH 4 ** 7 ** PWM7
-  TIMER4C , // PH 5 ** 8 ** PWM8
+  TIMER4C, // PH 5 ** 8 ** PWM8
-  TIMER2B , // PH 6 ** 9 ** PWM9
+  TIMER2B, // PH 6 ** 9 ** PWM9
-  TIMER2A , // PB 4 ** 10 ** PWM10
+  TIMER2A, // PB 4 ** 10 ** PWM10
-  TIMER1A , // PB 5 ** 11 ** PWM11
+  TIMER1A, // PB 5 ** 11 ** PWM11
-  TIMER1B , // PB 6 ** 12 ** PWM12
+  TIMER1B, // PB 6 ** 12 ** PWM12
-  TIMER0A , // PB 7 ** 13 ** PWM13
+  TIMER0A, // PB 7 ** 13 ** PWM13
-  NOT_ON_TIMER  , // PJ 1 ** 14 ** USART3_TX
+  NOT_ON_TIMER, // PJ 1 ** 14 ** USART3_TX
-  NOT_ON_TIMER  , // PJ 0 ** 15 ** USART3_RX
+  NOT_ON_TIMER, // PJ 0 ** 15 ** USART3_RX
-  NOT_ON_TIMER  , // PH 1 ** 16 ** USART2_TX
+  NOT_ON_TIMER, // PH 1 ** 16 ** USART2_TX
-  NOT_ON_TIMER  , // PH 0 ** 17 ** USART2_RX
+  NOT_ON_TIMER, // PH 0 ** 17 ** USART2_RX
-  NOT_ON_TIMER  , // PD 3 ** 18 ** USART1_TX
+  NOT_ON_TIMER, // PD 3 ** 18 ** USART1_TX
-  NOT_ON_TIMER  , // PD 2 ** 19 ** USART1_RX
+  NOT_ON_TIMER, // PD 2 ** 19 ** USART1_RX
-  NOT_ON_TIMER  , // PD 1 ** 20 ** I2C_SDA
+  NOT_ON_TIMER, // PD 1 ** 20 ** I2C_SDA
-  NOT_ON_TIMER  , // PD 0 ** 21 ** I2C_SCL
+  NOT_ON_TIMER, // PD 0 ** 21 ** I2C_SCL
-  NOT_ON_TIMER  , // PA 0 ** 22 ** D22
+  NOT_ON_TIMER, // PA 0 ** 22 ** D22
-  NOT_ON_TIMER  , // PA 1 ** 23 ** D23
+  NOT_ON_TIMER, // PA 1 ** 23 ** D23
-  NOT_ON_TIMER  , // PA 2 ** 24 ** D24
+  NOT_ON_TIMER, // PA 2 ** 24 ** D24
-  NOT_ON_TIMER  , // PA 3 ** 25 ** D25
+  NOT_ON_TIMER, // PA 3 ** 25 ** D25
-  NOT_ON_TIMER  , // PA 4 ** 26 ** D26
+  NOT_ON_TIMER, // PA 4 ** 26 ** D26
-  NOT_ON_TIMER  , // PA 5 ** 27 ** D27
+  NOT_ON_TIMER, // PA 5 ** 27 ** D27
-  NOT_ON_TIMER  , // PA 6 ** 28 ** D28
+  NOT_ON_TIMER, // PA 6 ** 28 ** D28
-  NOT_ON_TIMER  , // PA 7 ** 29 ** D29
+  NOT_ON_TIMER, // PA 7 ** 29 ** D29
-  NOT_ON_TIMER  , // PC 7 ** 30 ** D30
+  NOT_ON_TIMER, // PC 7 ** 30 ** D30
-  NOT_ON_TIMER  , // PC 6 ** 31 ** D31
+  NOT_ON_TIMER, // PC 6 ** 31 ** D31
-  NOT_ON_TIMER  , // PC 5 ** 32 ** D32
+  NOT_ON_TIMER, // PC 5 ** 32 ** D32
-  NOT_ON_TIMER  , // PC 4 ** 33 ** D33
+  NOT_ON_TIMER, // PC 4 ** 33 ** D33
-  NOT_ON_TIMER  , // PC 3 ** 34 ** D34
+  NOT_ON_TIMER, // PC 3 ** 34 ** D34
-  NOT_ON_TIMER  , // PC 2 ** 35 ** D35
+  NOT_ON_TIMER, // PC 2 ** 35 ** D35
-  NOT_ON_TIMER  , // PC 1 ** 36 ** D36
+  NOT_ON_TIMER, // PC 1 ** 36 ** D36
-  NOT_ON_TIMER  , // PC 0 ** 37 ** D37
+  NOT_ON_TIMER, // PC 0 ** 37 ** D37
-  NOT_ON_TIMER  , // PD 7 ** 38 ** D38
+  NOT_ON_TIMER, // PD 7 ** 38 ** D38
-  NOT_ON_TIMER  , // PG 2 ** 39 ** D39
+  NOT_ON_TIMER, // PG 2 ** 39 ** D39
-  NOT_ON_TIMER  , // PG 1 ** 40 ** D40
+  NOT_ON_TIMER, // PG 1 ** 40 ** D40
-  NOT_ON_TIMER  , // PG 0 ** 41 ** D41
+  NOT_ON_TIMER, // PG 0 ** 41 ** D41
-  NOT_ON_TIMER  , // PL 7 ** 42 ** D42
+  NOT_ON_TIMER, // PL 7 ** 42 ** D42
-  NOT_ON_TIMER  , // PL 6 ** 43 ** D43
+  NOT_ON_TIMER, // PL 6 ** 43 ** D43
-  TIMER5C , // PL 5 ** 44 ** D44
+  TIMER5C, // PL 5 ** 44 ** D44
-  TIMER5B , // PL 4 ** 45 ** D45
+  TIMER5B, // PL 4 ** 45 ** D45
-  TIMER5A , // PL 3 ** 46 ** D46
+  TIMER5A, // PL 3 ** 46 ** D46
-  NOT_ON_TIMER  , // PL 2 ** 47 ** D47
+  NOT_ON_TIMER, // PL 2 ** 47 ** D47
-  NOT_ON_TIMER  , // PL 1 ** 48 ** D48
+  NOT_ON_TIMER, // PL 1 ** 48 ** D48
-  NOT_ON_TIMER  , // PL 0 ** 49 ** D49
+  NOT_ON_TIMER, // PL 0 ** 49 ** D49
-  NOT_ON_TIMER  , // PB 3 ** 50 ** SPI_MISO
+  NOT_ON_TIMER, // PB 3 ** 50 ** SPI_MISO
-  NOT_ON_TIMER  , // PB 2 ** 51 ** SPI_MOSI
+  NOT_ON_TIMER, // PB 2 ** 51 ** SPI_MOSI
-  NOT_ON_TIMER  , // PB 1 ** 52 ** SPI_SCK
+  NOT_ON_TIMER, // PB 1 ** 52 ** SPI_SCK
-  NOT_ON_TIMER  , // PB 0 ** 53 ** SPI_SS
+  NOT_ON_TIMER, // PB 0 ** 53 ** SPI_SS
-  NOT_ON_TIMER  , // PF 0 ** 54 ** A0
+  NOT_ON_TIMER, // PF 0 ** 54 ** A0
-  NOT_ON_TIMER  , // PF 1 ** 55 ** A1
+  NOT_ON_TIMER, // PF 1 ** 55 ** A1
-  NOT_ON_TIMER  , // PF 2 ** 56 ** A2
+  NOT_ON_TIMER, // PF 2 ** 56 ** A2
-  NOT_ON_TIMER  , // PF 3 ** 57 ** A3
+  NOT_ON_TIMER, // PF 3 ** 57 ** A3
-  NOT_ON_TIMER  , // PF 4 ** 58 ** A4
+  NOT_ON_TIMER, // PF 4 ** 58 ** A4
-  NOT_ON_TIMER  , // PF 5 ** 59 ** A5
+  NOT_ON_TIMER, // PF 5 ** 59 ** A5
-  NOT_ON_TIMER  , // PF 6 ** 60 ** A6
+  NOT_ON_TIMER, // PF 6 ** 60 ** A6
-  NOT_ON_TIMER  , // PF 7 ** 61 ** A7
+  NOT_ON_TIMER, // PF 7 ** 61 ** A7
-  NOT_ON_TIMER  , // PK 0 ** 62 ** A8
+  NOT_ON_TIMER, // PK 0 ** 62 ** A8
-  NOT_ON_TIMER  , // PK 1 ** 63 ** A9
+  NOT_ON_TIMER, // PK 1 ** 63 ** A9
-  NOT_ON_TIMER  , // PK 2 ** 64 ** A10
+  NOT_ON_TIMER, // PK 2 ** 64 ** A10
-  NOT_ON_TIMER  , // PK 3 ** 65 ** A11
+  NOT_ON_TIMER, // PK 3 ** 65 ** A11
-  NOT_ON_TIMER  , // PK 4 ** 66 ** A12
+  NOT_ON_TIMER, // PK 4 ** 66 ** A12
-  NOT_ON_TIMER  , // PK 5 ** 67 ** A13
+  NOT_ON_TIMER, // PK 5 ** 67 ** A13
-  NOT_ON_TIMER  , // PK 6 ** 68 ** A14
+  NOT_ON_TIMER, // PK 6 ** 68 ** A14
-  NOT_ON_TIMER  , // PK 7 ** 69 ** A15
+  NOT_ON_TIMER, // PK 7 ** 69 ** A15
-  NOT_ON_TIMER  , // PG 4 ** 70 **
+  NOT_ON_TIMER, // PG 4 ** 70 **
-  NOT_ON_TIMER  , // PG 3 ** 71 **
+  NOT_ON_TIMER, // PG 3 ** 71 **
-  NOT_ON_TIMER  , // PJ 2 ** 72 **
+  NOT_ON_TIMER, // PJ 2 ** 72 **
-  NOT_ON_TIMER  , // PJ 3 ** 73 **
+  NOT_ON_TIMER, // PJ 3 ** 73 **
-  NOT_ON_TIMER  , // PJ 7 ** 74 **
+  NOT_ON_TIMER, // PJ 7 ** 74 **
-  NOT_ON_TIMER  , // PJ 4 ** 75 **
+  NOT_ON_TIMER, // PJ 4 ** 75 **
-  NOT_ON_TIMER  , // PJ 5 ** 76 **
+  NOT_ON_TIMER, // PJ 5 ** 76 **
-  NOT_ON_TIMER  , // PJ 6 ** 77 **
+  NOT_ON_TIMER, // PJ 6 ** 77 **
-  NOT_ON_TIMER  , // PE 2 ** 78 **
+  NOT_ON_TIMER, // PE 2 ** 78 **
-  NOT_ON_TIMER  , // PE 6 ** 79 **
+  NOT_ON_TIMER, // PE 6 ** 79 **
 };
 
 #define digitalPinToTimer_plus_70(P) ( pgm_read_byte( digital_pin_to_timer_PGM_plus_70 + (P) ) )

Marlin/src/HAL/AVR/spi_pins.h

@@ -23,43 +23,41 @@
 
 /**
  * Define SPI Pins: SCK, MISO, MOSI, SS
+ * Platform pins have parentheses, e.g., "(53)", so we cannot use them.
  */
 #if defined(__AVR_ATmega168__) || defined(__AVR_ATmega328__) || defined(__AVR_ATmega328P__)
-  #define AVR_SCK_PIN  13
+  #define _PIN_SPI_SCK  13
-  #define AVR_MISO_PIN 12
+  #define _PIN_SPI_MISO 12
-  #define AVR_MOSI_PIN 11
+  #define _PIN_SPI_MOSI 11
-  #define AVR_SS_PIN   10
+  #define _PIN_SPI_SS   10
 #elif defined(__AVR_ATmega644__) || defined(__AVR_ATmega644P__) || defined(__AVR_ATmega644PA__) || defined(__AVR_ATmega1284P__)
-  #define AVR_SCK_PIN  7
+  #define _PIN_SPI_SCK  7
-  #define AVR_MISO_PIN 6
+  #define _PIN_SPI_MISO 6
-  #define AVR_MOSI_PIN 5
+  #define _PIN_SPI_MOSI 5
-  #define AVR_SS_PIN   4
+  #define _PIN_SPI_SS   4
 #elif defined(__AVR_ATmega1280__) || defined(__AVR_ATmega2560__)
-  #define AVR_SCK_PIN  52
+  #define _PIN_SPI_SCK  52
-  #define AVR_MISO_PIN 50
+  #define _PIN_SPI_MISO 50
-  #define AVR_MOSI_PIN 51
+  #define _PIN_SPI_MOSI 51
-  #define AVR_SS_PIN   53
+  #define _PIN_SPI_SS   53
 #elif defined(__AVR_AT90USB1287__) || defined(__AVR_AT90USB1286__) || defined(__AVR_AT90USB646__) || defined(__AVR_AT90USB647__)
-  #define AVR_SCK_PIN  21
+  #define _PIN_SPI_SCK  21
-  #define AVR_MISO_PIN 23
+  #define _PIN_SPI_MISO 23
-  #define AVR_MOSI_PIN 22
+  #define _PIN_SPI_MOSI 22
-  #define AVR_SS_PIN   20
+  #define _PIN_SPI_SS   20
 #elif defined(__AVR_ATmega1281__) || defined(__AVR_ATmega2561__)
-  #define AVR_SCK_PIN  10
+  #define _PIN_SPI_SCK  10
-  #define AVR_MISO_PIN 12
+  #define _PIN_SPI_MISO 12
-  #define AVR_MOSI_PIN 11
+  #define _PIN_SPI_MOSI 11
-  #define AVR_SS_PIN   16
+  #define _PIN_SPI_SS   16
 #endif
 
 #ifndef SD_SCK_PIN
-  #define SD_SCK_PIN  AVR_SCK_PIN
+  #define SD_SCK_PIN  _PIN_SPI_SCK
 #endif
 #ifndef SD_MISO_PIN
-  #define SD_MISO_PIN AVR_MISO_PIN
+  #define SD_MISO_PIN _PIN_SPI_MISO
 #endif
 #ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN AVR_MOSI_PIN
+  #define SD_MOSI_PIN _PIN_SPI_MOSI
-#endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN   AVR_SS_PIN
 #endif

Marlin/src/HAL/AVR/u8g/u8g_com_HAL_AVR_sw_spi.cpp

@@ -55,12 +55,12 @@
 
 #if defined(ARDUINO) && !defined(ARDUINO_ARCH_STM32) && !defined(ARDUINO_ARCH_SAM)
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if HAS_MARLINUI_U8GLIB
 
-#include "../shared/Marduino.h"
+#include "../../shared/Marduino.h"
-#include "../shared/Delay.h"
+#include "../../shared/Delay.h"
 
 #include <U8glib-HAL.h>
 

Marlin/src/HAL/DUE/HAL.cpp

@@ -48,7 +48,7 @@ uint16_t MarlinHAL::adc_result;
 
 void MarlinHAL::init() {
   #if HAS_MEDIA
-    OUT_WRITE(SDSS, HIGH);  // Try to set SDSS inactive before any other SPI users start up
+    OUT_WRITE(SD_SS_PIN, HIGH);  // Try to set SDSS inactive before any other SPI users start up
   #endif
   usb_task_init();          // Initialize the USB stack
   TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
@@ -102,6 +102,10 @@ void watchdogSetup() {
 
   #if ENABLED(USE_WATCHDOG)
 
+    #ifndef WATCHDOG_PIO_RESET
+      #define WATCHDOG_PIO_RESET
+    #endif
+
     // 4 seconds timeout
     uint32_t timeout = TERN(WATCHDOG_DURATION_8S, 8000, 4000);
 
@@ -115,15 +119,16 @@ void watchdogSetup() {
       timeout = 0xFFF;
 
     // We want to enable the watchdog with the specified timeout
-    uint32_t value =
+    uint32_t value = (0
-      WDT_MR_WDV(timeout) |               // With the specified timeout
+      | WDT_MR_WDV(timeout)               // With the specified timeout
-      WDT_MR_WDD(timeout) |               // and no invalid write window
+      | WDT_MR_WDD(timeout)               // and no invalid write window
-    #if !(SAMV70 || SAMV71 || SAME70 || SAMS70)
+      #if NONE(WATCHDOG_PIO_RESET, SAMV70, SAMV71, SAME70, SAMS70)
-      WDT_MR_WDRPROC   |                  // WDT fault resets processor only - We want
+        | WDT_MR_WDRPROC                  // WDT fault resets processor only with this flag.
-                                          // to keep PIO controller state
+                                          // Omit to also reset the PIO controller.
-    #endif
+      #endif
-      WDT_MR_WDDBGHLT  |                  // WDT stops in debug state.
+      | WDT_MR_WDDBGHLT                   // WDT stops in debug state.
-      WDT_MR_WDIDLEHLT;                   // WDT stops in idle state.
+      | WDT_MR_WDIDLEHLT                  // WDT stops in idle state.
+    );
 
     #if ENABLED(WATCHDOG_RESET_MANUAL)
       // We enable the watchdog timer, but only for the interrupt.

Marlin/src/HAL/DUE/HAL.h

@@ -35,67 +35,9 @@
 
 #include <stdint.h>
 
-#include "../../core/serial_hook.h"
+//
-
+// Serial Ports
-// ------------------------
+//
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
-typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
-typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
-typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
-extern DefaultSerial1 MSerial0;
-extern DefaultSerial2 MSerial1;
-extern DefaultSerial3 MSerial2;
-extern DefaultSerial4 MSerial3;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
-  #define MYSERIAL1 customizedSerial1
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "The required SERIAL_PORT must be from 0 to 3, or -1 for USB Serial."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL2 customizedSerial2
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1 || ENABLED(EMERGENCY_PARSER)
-    #define MYSERIAL3 customizedSerial3
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3, or -1 for USB Serial."
-  #endif
-#endif
-
-#ifdef MMU_SERIAL_PORT
-  #if WITHIN(MMU_SERIAL_PORT, 0, 3)
-    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
-  #else
-    #error "MMU_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3."
-  #endif
-#endif
 
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"

Marlin/src/HAL/DUE/HAL_SPI.cpp

@@ -208,8 +208,8 @@
       A("str %[sck_mask],[%[sck_port],#0x4]")      /* CODR */
       A("bfi %[bin],%[work],#0,#1")                /* Store read bit as the bit 0 */
 
-      : [bin]"+r"(bin),
+      : [bin]"+r"( bin ),
-        [work]"+r"(work)
+        [work]"+r"( work )
       : [bitband_miso_port]"r"( BITBAND_MISO_PORT ),
         [sck_mask]"r"( SCK_MASK ),
         [sck_port]"r"( SCK_PORT_PLUS30 )
@@ -350,7 +350,7 @@
   static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
     uint32_t bin = 0;
     uint32_t work = 0;
-    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN));  /* PDSR of port in bitband area */
+    uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS(((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
     uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30;    /* SODR of port */
     uint32_t SCK_MASK = PIN_MASK(SD_SCK_PIN);
 
@@ -412,10 +412,10 @@
       A("strb.w %[bin], [%[ptr]], #1")             /* Store read value into buffer, increment buffer pointer */
       A("bne.n loop%=")                            /* Repeat until done */
 
-      : [ptr]"+r"(ptr),
+      : [ptr]"+r"( ptr ),
-        [todo]"+r"(todo),
+        [todo]"+r"( todo ),
-        [bin]"+r"(bin),
+        [bin]"+r"( bin ),
-        [work]"+r"(work)
+        [work]"+r"( work )
       : [bitband_miso_port]"r"( BITBAND_MISO_PORT ),
         [sck_mask]"r"( SCK_MASK ),
         [sck_port]"r"( SCK_PORT_PLUS30 )
@@ -600,9 +600,8 @@
       OUT_WRITE(SPI_EEPROM1_CS_PIN, HIGH);
       OUT_WRITE(SPI_EEPROM2_CS_PIN, HIGH);
       OUT_WRITE(SPI_FLASH_CS_PIN, HIGH);
-      WRITE(SD_SS_PIN, HIGH);
+      OUT_WRITE(SD_SS_PIN, HIGH);
-
+      WRITE(SD_SS_PIN, LOW);
-      OUT_WRITE(SDSS, LOW);
 
       PIO_Configure(
         g_APinDescription[SPI_PIN].pPort,
@@ -767,7 +766,7 @@
 
       // Disable PIO on A26 and A27
       REG_PIOA_PDR = 0x0C000000;
-      OUT_WRITE(SDSS, HIGH);
+      OUT_WRITE(SD_SS_PIN, HIGH);
 
       // Reset SPI0 (from sam lib)
       SPI0->SPI_CR = SPI_CR_SPIDIS;

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -33,6 +33,21 @@
 #include "../../core/types.h"
 #include "../../core/serial_hook.h"
 
+typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
+typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
+typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
+typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
+extern DefaultSerial1 MSerial0;
+extern DefaultSerial2 MSerial1;
+extern DefaultSerial3 MSerial2;
+extern DefaultSerial4 MSerial3;
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 3
+#define EP_SERIAL_PORT(N) customizedSerial##N
+#define USB_SERIAL_PORT(N) customizedSerial##N
+#include "../shared/serial_ports.h"
+
 // Define constants and variables for buffering incoming serial data.  We're
 // using a ring buffer (I think), in which rx_buffer_head is the index of the
 // location to which to write the next incoming character and rx_buffer_tail

Marlin/src/HAL/DUE/eeprom/eeprom_flash.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(FLASH_EEPROM_EMULATION)
 
@@ -132,7 +132,7 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curGroup = 0xFF;     // Current FLASH group
 
 #define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
-#include "../../core/debug_out.h"
+#include "../../../core/debug_out.h"
 
 static void ee_Dump(const int page, const void *data) {
 
@@ -291,7 +291,7 @@ static bool ee_PageWrite(uint16_t page, const void *data) {
       uint32_t *p1 = (uint32_t*)addrflash;
       uint32_t *p2 = (uint32_t*)data;
       int count = 0;
-      for (i =0; i<PageSize >> 2; i++) {
+      for (i = 0; i < PageSize >> 2; i++) {
         if (p1[i] != p2[i]) {
           uint32_t delta = p1[i] ^ p2[i];
           while (delta) {
@@ -953,7 +953,7 @@ static void ee_Init() {
 
 /* PersistentStore -----------------------------------------------------------*/
 
-#include "../shared/eeprom_api.h"
+#include "../../shared/eeprom_api.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #define MARLIN_EEPROM_SIZE 0x1000 // 4KB

Marlin/src/HAL/DUE/eeprom/eeprom_wired.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if USE_WIRED_EEPROM
 
@@ -30,8 +30,8 @@
  * with simple implementations supplied by Marlin.
  */
 
-#include "../shared/eeprom_if.h"
+#include "../../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
+#include "../../shared/eeprom_api.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -40,11 +40,12 @@
  * Some jitter in the Vref signal is OK so the interrupt priority is left at its default value.
  */
 
-#include "../../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if MB(PRINTRBOARD_G2)
 
 #include "G2_PWM.h"
+#include "../../../module/stepper.h"
 
 #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
   #define G2_PWM_X 1
@@ -56,16 +57,12 @@
 #else
   #define G2_PWM_Y 0
 #endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
+#if HAS_MOTOR_CURRENT_PWM_Z
   #define G2_PWM_Z 1
 #else
   #define G2_PWM_Z 0
 #endif
-#if HAS_MOTOR_CURRENT_PWM_E
+#define G2_PWM_E HAS_MOTOR_CURRENT_PWM_E
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
 #define G2_MASK_X(V) (G2_PWM_X * (V))
 #define G2_MASK_Y(V) (G2_PWM_Y * (V))
 #define G2_MASK_Z(V) (G2_PWM_Z * (V))
@@ -80,17 +77,22 @@ PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
 
 void Stepper::digipot_init() {
 
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
+  #if G2_PWM_X
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, LOW);  // init pins
   #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
+  #if G2_PWM_Y
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, LOW);
   #endif
   #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, LOW);
   #endif
   #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
+    #if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
+      OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, LOW);
+    #endif
+    #if PIN_EXISTS(MOTOR_CURRENT_PWM_E0)
+      OUT_WRITE(MOTOR_CURRENT_PWM_E0_PIN, LOW);
+    #endif
   #endif
 
   #define WPKEY          (0x50574D << 8) // “PWM” in ASCII

Marlin/src/HAL/DUE/fastio/G2_PWM.h

@@ -26,10 +26,7 @@
  * PR #7500. It is hardwired for the PRINTRBOARD_G2 Motor Current needs.
  */
 
-#include "../../../inc/MarlinConfigPre.h"
+#include <stdint.h>
-#include "../../../module/stepper.h"
-//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\module\stepper.h
-//C:\Users\bobku\Documents\GitHub\Marlin-Bob-2\Marlin\src\HAL\HAL_DUE\G2_PWM.h
 
 #define PWM_PERIOD_US  100  // base repetition rate in micro seconds
 

Marlin/src/HAL/DUE/pinsDebug.h

@@ -19,13 +19,26 @@
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
  *
  */
+#pragma once
 
 /**
- * Support routines for Due
+ * Pins Debugging for DUE
- */
+ *
-
+ *   - NUMBER_PINS_TOTAL
-/**
+ *   - MULTI_NAME_PAD
- * Translation of routines & variables used by pinsDebug.h
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
  */
 
 #include "../shared/Marduino.h"
@@ -63,20 +76,20 @@
 
 #define NUMBER_PINS_TOTAL PINS_COUNT
 
-#define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
+#define digitalRead_mod(P) extDigitalRead(P)  // AVR digitalRead disabled PWM before it read the pin
 #define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
-#define getPinByIndex(p) pin_array[p].pin
+#define getPinByIndex(x) pin_array[x].pin
-#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
-#define isValidPin(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
-#define digitalPinToAnalogIndex(p) int(p - analogInputToDigitalPin(0))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
 #define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
-#define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
+#define pwm_status(P) (((g_pinStatus[P] & 0xF) == PIN_STATUS_PWM) && \
-                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
+                        ((g_APinDescription[P].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin
 
-bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(const pin_t pin) {  // 1: output, 0: input
   volatile Pio* port = g_APinDescription[pin].pPort;
   uint32_t mask = g_APinDescription[pin].ulPin;
   uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -85,7 +98,7 @@ bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
           || pwm_status(pin));
 }
 
-void printPinPWM(int32_t pin) {
+void printPinPWM(const int32_t pin) {
   if (pwm_status(pin)) {
     uint32_t chan = g_APinDescription[pin].ulPWMChannel;
     SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);

Marlin/src/HAL/DUE/spi_pins.h

@@ -26,39 +26,36 @@
  *
  * Available chip select pins for HW SPI are 4 10 52 77 87
  */
-#if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
+#if SD_SS_PIN == 4 || SD_SS_PIN == 10 || SD_SS_PIN == 52 || SD_SS_PIN == 77 || SD_SS_PIN == 87
-  #if SDSS == 4
+  #define SD_SCK_PIN      76
-    #define SPI_PIN         87
+  #define SD_MISO_PIN     74
-    #define SPI_CHAN         1
+  #define SD_MOSI_PIN     75
-  #elif SDSS == 10
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #elif SDSS == 52
-    #define SPI_PIN         86
-    #define SPI_CHAN         2
-  #elif SDSS == 77
-    #define SPI_PIN         77
-    #define SPI_CHAN         0
-  #else
-    #define SPI_PIN         87
-    #define SPI_CHAN         1
-  #endif
-  #define SD_SCK_PIN        76
-  #define SD_MISO_PIN       74
-  #define SD_MOSI_PIN       75
-#else
-  // defaults
-  #define SOFTWARE_SPI
-  #ifndef SD_SCK_PIN
-    #define SD_SCK_PIN      52
-  #endif
-  #ifndef SD_MISO_PIN
-    #define SD_MISO_PIN     50
-  #endif
-  #ifndef SD_MOSI_PIN
-    #define SD_MOSI_PIN     51
-  #endif
 #endif
 
-/* A.28, A.29, B.21, C.26, C.29 */
+#if SD_SS_PIN == 4
-#define SD_SS_PIN         SDSS
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#elif SD_SS_PIN == 10
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 52
+  #define SPI_PIN         86
+  #define SPI_CHAN         2
+#elif SD_SS_PIN == 77
+  #define SPI_PIN         77
+  #define SPI_CHAN         0
+#elif SD_SS_PIN == 87
+  #define SPI_PIN         87
+  #define SPI_CHAN         1
+#else
+  #define SOFTWARE_SPI
+  #ifndef SD_SCK_PIN
+    #define SD_SCK_PIN    52
+  #endif
+  #ifndef SD_MISO_PIN
+    #define SD_MISO_PIN   50
+  #endif
+  #ifndef SD_MOSI_PIN
+    #define SD_MOSI_PIN   51
+  #endif
+#endif

Marlin/src/HAL/DUE/usb/ctrl_access.c

@@ -63,8 +63,8 @@
 #include "compiler.h"
 #include "preprocessor.h"
 #ifdef FREERTOS_USED
-#include "FreeRTOS.h"
+#include <FreeRTOS.h>
-#include "semphr.h"
+#include <semphr.h>
 #endif
 #include "ctrl_access.h"
 

Marlin/src/HAL/DUE/usb/sd_mmc_spi_mem.cpp

@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init() {
 }
 
 inline bool media_ready() {
-  return IS_SD_MOUNTED() && IS_SD_INSERTED() && !IS_SD_FILE_OPEN() && !IS_SD_PRINTING();
+  return card.isMounted() && card.isInserted() && !card.isFileOpen() && !card.isStillPrinting();
 }
 
 bool sd_mmc_spi_unload(bool) { return true; }
@@ -29,11 +29,10 @@ bool sd_mmc_spi_wr_protect() { return false; }
 bool sd_mmc_spi_removal() { return !media_ready(); }
 
 Ctrl_status sd_mmc_spi_test_unit_ready() {
-  #ifdef DISABLE_DUE_SD_MMC
+  #if ENABLED(DISABLE_DUE_SD_MMC)
     return CTRL_NO_PRESENT;
   #endif
-  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  return sd_mmc_spi_removal() ? CTRL_NO_PRESENT : CTRL_GOOD;
-  return CTRL_GOOD;
 }
 
 // NOTE: This function is defined as returning the address of the last block
@@ -58,9 +57,10 @@ uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
 // #define DEBUG_MMC
 
 Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
-  #ifdef DISABLE_DUE_SD_MMC
+  #if ENABLED(DISABLE_DUE_SD_MMC)
     return CTRL_NO_PRESENT;
   #endif
+
   if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC
@@ -97,9 +97,10 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
 }
 
 Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
-  #ifdef DISABLE_DUE_SD_MMC
+  #if ENABLED(DISABLE_DUE_SD_MMC)
     return CTRL_NO_PRESENT;
   #endif
+
   if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
 
   #ifdef DEBUG_MMC

Marlin/src/HAL/ESP32/HAL.cpp

@@ -34,13 +34,13 @@
 
 #if ENABLED(WIFISUPPORT)
   #include <ESPAsyncWebServer.h>
-  #include "wifi.h"
+  #include "wifi/wifi.h"
   #if ENABLED(OTASUPPORT)
-    #include "ota.h"
+    #include "wifi/ota.h"
   #endif
   #if ENABLED(WEBSUPPORT)
-    #include "spiffs.h"
+    #include "wifi/spiffs.h"
-    #include "web.h"
+    #include "wifi/web.h"
   #endif
 #endif
 
@@ -175,8 +175,6 @@ uint8_t MarlinHAL::get_reset_source() { return rtc_get_reset_reason(1); }
 
 void MarlinHAL::reboot() { ESP.restart(); }
 
-void _delay_ms(const int ms) { delay(ms); }
-
 // return free memory between end of heap (or end bss) and whatever is current
 int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 

Marlin/src/HAL/ESP32/HAL.h

@@ -37,11 +37,11 @@
 #include "i2s.h"
 
 #if ENABLED(WIFISUPPORT)
-  #include "WebSocketSerial.h"
+  #include "wifi/WebSocketSerial.h"
 #endif
 
 #if ENABLED(ESP3D_WIFISUPPORT)
-  #include "esp3dlib.h"
+  #include <esp3dlib.h>
 #endif
 
 #include "FlushableHardwareSerial.h"
@@ -165,8 +165,6 @@ int freeMemory();
 
 #pragma GCC diagnostic pop
 
-void _delay_ms(const int ms);
-
 // ------------------------
 // MarlinHAL Class
 // ------------------------
@@ -194,7 +192,7 @@ public:
   static void isr_on()  { if (spinlock.owner != portMUX_FREE_VAL) portEXIT_CRITICAL(&spinlock); }
   static void isr_off() { portENTER_CRITICAL(&spinlock); }
 
-  static void delay_ms(const int ms) { _delay_ms(ms); }
+  static void delay_ms(const int ms) { delay(ms); }
 
   // Tasks, called from idle()
   static void idletask();

Marlin/src/HAL/ESP32/fastio.h

@@ -37,6 +37,10 @@
 // Set pin as output
 #define _SET_OUTPUT(IO)         pinMode(IO, OUTPUT)
 
+// TODO: Store set modes in an array and use those to get the mode
+#define _IS_OUTPUT(IO)           true
+#define _IS_INPUT(IO)            true
+
 // Set pin as input with pullup mode
 #define _PULLUP(IO, v)          pinMode(IO, v ? INPUT_PULLUP : INPUT)
 
@@ -70,6 +74,9 @@
 // Set pin as output and init
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)
 
+#define IS_OUTPUT(IO)            _IS_OUTPUT(IO)
+#define IS_INPUT(IO)             _IS_INPUT(IO)
+
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)      digitalRead(IO)
 #define extDigitalWrite(IO,V)   digitalWrite(IO,V)

Marlin/src/HAL/ESP32/i2s.cpp

@@ -145,7 +145,7 @@ static void IRAM_ATTR i2s_intr_handler_default(void *arg) {
 void stepperTask(void *parameter) {
   uint32_t nextMainISR = 0;
   #if ENABLED(LIN_ADVANCE)
-    uint32_t nextAdvanceISR = Stepper::LA_ADV_NEVER;
+    uint32_t nextAdvanceISR = stepper.LA_ADV_NEVER;
   #endif
 
   for (;;) {
@@ -167,13 +167,13 @@ void stepperTask(void *parameter) {
 
       if (!using_ftMotion) {
         if (!nextMainISR) {
-          Stepper::pulse_phase_isr();
+          stepper.pulse_phase_isr();
-          nextMainISR = Stepper::block_phase_isr();
+          nextMainISR = stepper.block_phase_isr();
         }
         #if ENABLED(LIN_ADVANCE)
           else if (!nextAdvanceISR) {
-            Stepper::advance_isr();
+            stepper.advance_isr();
-            nextAdvanceISR = Stepper::la_interval;
+            nextAdvanceISR = stepper.la_interval;
           }
         #endif
         else
@@ -182,10 +182,10 @@ void stepperTask(void *parameter) {
         nextMainISR--;
 
         #if ENABLED(LIN_ADVANCE)
-          if (nextAdvanceISR == Stepper::LA_ADV_NEVER)
+          if (nextAdvanceISR == stepper.LA_ADV_NEVER)
-            nextAdvanceISR = Stepper::la_interval;
+            nextAdvanceISR = stepper.la_interval;
 
-          if (nextAdvanceISR && nextAdvanceISR != Stepper::LA_ADV_NEVER)
+          if (nextAdvanceISR && nextAdvanceISR != stepper.LA_ADV_NEVER)
             nextAdvanceISR--;
         #endif
       }

Marlin/src/HAL/ESP32/pinsDebug.h

@@ -0,0 +1,71 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#error "PINS_DEBUGGING is not yet supported for ESP32!"
+
+/**
+ * Pins Debugging for ESP32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
+#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
+#define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin
+
+#define digitalRead_mod(P) extDigitalRead(P)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%02d"), P); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(x) pin_array[x].pin
+#define getPinIsDigitalByIndex(x) pin_array[x].is_digital
+#define isValidPin(P) (P >= 0 && P < pin_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(P) int(P - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+bool pwm_status(const pin_t) { return false; }
+
+void printPinPort(const pin_t) {}
+
+static bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
+}
+
+void printPinPWM(const int32_t pin) {
+  if (pwm_status(pin)) {
+    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
+    //SERIAL_ECHOPGM("PWM = ", duty);
+  }
+}

Marlin/src/HAL/ESP32/spi_pins.h

@@ -21,7 +21,16 @@
  */
 #pragma once
 
-#define SD_SS_PIN   SDSS
+#define PIN_SPI_SCK  18
-#define SD_SCK_PIN  18
+#define PIN_SPI_MISO 19
-#define SD_MISO_PIN 19
+#define PIN_SPI_MOSI 23
-#define SD_MOSI_PIN 23
+
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  PIN_SPI_SCK
+#endif
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN PIN_SPI_MISO
+#endif
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN PIN_SPI_MOSI
+#endif

Marlin/src/HAL/ESP32/u8g_esp32_spi.cpp

@@ -35,7 +35,7 @@
 #if HAS_MEDIA
   #include "../../sd/cardreader.h"
   #if ENABLED(ESP3D_WIFISUPPORT)
-    #include "sd_ESP32.h"
+    #include <sd_ESP32.h>
   #endif
 #endif
 

Marlin/src/HAL/ESP32/wifi/WebSocketSerial.cpp

@@ -21,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if ENABLED(WIFISUPPORT)
 

Marlin/src/HAL/ESP32/wifi/WebSocketSerial.h

@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
-#include "../../core/serial_hook.h"
+#include "../../../core/serial_hook.h"
 
 #include <Stream.h>
 

Marlin/src/HAL/ESP32/wifi/ota.cpp

@@ -22,11 +22,15 @@
 
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../inc/MarlinConfigPre.h"
+#include <WiFi.h>
+
+#undef ENABLED
+#undef DISABLED
+
+#include "../../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, OTASUPPORT)
 
-#include <WiFi.h>
 #include <ESPmDNS.h>
 #include <WiFiUdp.h>
 #include <ArduinoOTA.h>

Marlin/src/HAL/ESP32/wifi/spiffs.cpp

@@ -21,11 +21,11 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, WEBSUPPORT)
 
-#include "../../core/serial.h"
+#include "../../../core/serial.h"
 
 #include <FS.h>
 #include <SPIFFS.h>

Marlin/src/HAL/ESP32/wifi/web.cpp

@@ -21,11 +21,11 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../inc/MarlinConfigPre.h"
+#include "../../../inc/MarlinConfigPre.h"
 
 #if ALL(WIFISUPPORT, WEBSUPPORT)
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #undef DISABLED  // esp32-hal-gpio.h
 #include <SPIFFS.h>

Marlin/src/HAL/ESP32/wifi/wifi.cpp

@@ -21,11 +21,12 @@
  */
 #ifdef ARDUINO_ARCH_ESP32
 
-#include "../../core/serial.h"
+#include "../../../inc/MarlinConfigPre.h"
-#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(WIFISUPPORT)
 
+#include "../../../core/serial.h"
+
 #include <WiFi.h>
 #include <ESPmDNS.h>
 #include <ESPAsyncWebServer.h>

Marlin/src/HAL/GD32_MFL/HAL.cpp

@@ -0,0 +1,120 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfig.h"
+#include "../shared/Delay.h"
+
+uint16_t MarlinHAL::adc_result;
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+  extern void install_min_serial();
+#endif
+
+#if ENABLED(MARLIN_DEV_MODE)
+  // Dump the clock frequencies of the system, AHB, APB1, APB2, and F_CPU.
+  static inline void HAL_clock_frequencies_dump() {
+    auto& rcuInstance = rcu::RCU::get_instance();
+    uint32_t freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_SYS);
+    SERIAL_ECHOPGM("\nSYSTEM_CLOCK=", freq);
+    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_AHB);
+    SERIAL_ECHOPGM("\nABH_CLOCK=", freq);
+    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_APB1);
+    SERIAL_ECHOPGM("\nAPB1_CLOCK=", freq);
+    freq = rcuInstance.get_clock_frequency(rcu::Clock_Frequency::CK_APB2);
+    SERIAL_ECHOPGM("\nAPB2_CLOCK=", freq,
+    "\nF_CPU=", F_CPU);
+    // Done
+    SERIAL_ECHOPGM("\n--\n");
+  }
+#endif  // MARLIN_DEV_MODE
+
+// Initializes the Marlin HAL
+void MarlinHAL::init() {
+  constexpr unsigned int cpuFreq = F_CPU;
+  UNUSED(cpuFreq);
+
+#if PIN_EXISTS(LED)
+  OUT_WRITE(LED_PIN, LOW);
+#endif
+
+  SetTimerInterruptPriorities();
+
+  // Print clock frequencies to host serial
+  TERN_(MARLIN_DEV_MODE, HAL_clock_frequencies_dump());
+
+  // Register min serial
+  TERN_(POSTMORTEM_DEBUGGING, install_min_serial());
+}
+
+// Returns the reset source based on the flags set in the RCU module
+uint8_t MarlinHAL::get_reset_source() {
+  return
+    (RCU_I.get_flag(rcu::Status_Flags::FLAG_FWDGTRST)) ? RST_WATCHDOG :
+    (RCU_I.get_flag(rcu::Status_Flags::FLAG_SWRST)) ? RST_SOFTWARE :
+    (RCU_I.get_flag(rcu::Status_Flags::FLAG_EPRST)) ? RST_EXTERNAL :
+    (RCU_I.get_flag(rcu::Status_Flags::FLAG_PORRST)) ? RST_POWER_ON :
+    (RCU_I.get_flag(rcu::Status_Flags::FLAG_LPRST)) ? RST_BROWN_OUT :
+    0;
+}
+
+// Returns the amount of free memory available in bytes
+int MarlinHAL::freeMemory() {
+  volatile char top;
+  return &top - reinterpret_cast<char*>(_sbrk(0));
+}
+
+// Watchdog Timer
+#if ENABLED(USE_WATCHDOG)
+  #define WDT_TIMEOUT_US  TERN(WATCHDOG_DURATION_8S, 8000000, 4000000)  // 4 or 8 second timeout
+
+  #include <FWatchdogTimer.h>
+
+  FWatchdogTimer& watchdogTimer = FWatchdogTimer::get_instance();
+
+  // Initializes the watchdog timer
+  void MarlinHAL::watchdog_init() {
+    IF_DISABLED(DISABLE_WATCHDOG_INIT, watchdogTimer.begin(WDT_TIMEOUT_US));
+  }
+
+  // Refreshes the watchdog timer to prevent system reset
+  void MarlinHAL::watchdog_refresh() {
+    watchdogTimer.reload();
+    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
+      TOGGLE(LED_PIN);  // Heartbeat indicator
+    #endif
+  }
+#endif
+
+extern "C" {
+  extern unsigned int _ebss;  // End of bss section
+}
+
+// Resets the system to initiate a firmware flash.
+WEAK void flashFirmware(const int16_t) {
+  hal.reboot();
+}
+
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/HAL.h

@@ -0,0 +1,160 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define CPU_32_BIT
+
+#include "../../core/macros.h"
+#include "../shared/Marduino.h"
+#include "../shared/math_32bit.h"
+#include "../shared/HAL_SPI.h"
+
+#include "temp_soc.h"
+#include "fastio.h"
+#include "Servo.h"
+
+#include "../../inc/MarlinConfigPre.h"
+
+#include <stdint.h>
+#include <GPIO.hpp>
+#include <AFIO.hpp>
+
+// Default graphical display delays
+#define CPU_ST7920_DELAY_1 300
+#define CPU_ST7920_DELAY_2  40
+#define CPU_ST7920_DELAY_3 340
+
+// Serial Ports
+#include "MarlinSerial.h"
+
+// Interrupts
+#define CRITICAL_SECTION_START()  const bool irqon = !__get_PRIMASK(); __disable_irq()
+#define CRITICAL_SECTION_END()    if (irqon) __enable_irq()
+
+#define cli() __disable_irq()
+#define sei() __enable_irq()
+
+// Alias of __bss_end__
+#define __bss_end __bss_end__
+
+// Types
+typedef double isr_float_t; // FPU ops are used for single-precision, so use double for ISRs.
+typedef uint8_t pin_t;      // Parity with mfl platform
+
+// Servo
+class libServo;
+typedef libServo hal_servo_t;
+#define PAUSE_SERVO_OUTPUT()  libServo::pause_all_servos()
+#define RESUME_SERVO_OUTPUT() libServo::resume_all_servos()
+
+// Debugging
+#define JTAG_DISABLE()    AFIO_I.set_remap(gpio::Pin_Remap_Select::SWJ_DP_ONLY_REMAP)
+#define JTAGSWD_DISABLE() AFIO_I.set_remap(gpio::Pin_Remap_Select::SWJ_ALL_DISABLED_REMAP)
+#define JTAGSWD_RESET()   AFIO_I.set_remap(gpio::Pin_Remap_Select::FULL_SWJ_REMAP)
+
+// ADC
+#ifdef ADC_RESOLUTION
+  #define HAL_ADC_RESOLUTION  ADC_RESOLUTION
+#else
+  #define HAL_ADC_RESOLUTION  12
+#endif
+
+#define HAL_ADC_VREF_MV   3300
+
+// Disable Marlin's software oversampling.
+// The MFL framework uses 16x hardware oversampling by default
+#ifdef GD32F303RE
+  #define HAL_ADC_FILTERED
+#endif
+
+#define GET_PIN_MAP_PIN(index)        index
+#define GET_PIN_MAP_INDEX(pin)        pin
+#define PARSED_PIN_INDEX(code, dval)  parser.intval(code, dval)
+
+#ifndef PLATFORM_M997_SUPPORT
+  #define PLATFORM_M997_SUPPORT
+#endif
+
+void flashFirmware(const int16_t);
+
+#define HAL_CAN_SET_PWM_FREQ    // This HAL supports PWM Frequency adjustment
+
+extern "C" char* _sbrk(int incr);
+extern "C" char* dtostrf(double val, signed char width, unsigned char prec, char* sout);
+
+// MarlinHAL Class
+class MarlinHAL {
+public:
+  // Before setup()
+  MarlinHAL() {}
+
+  // Watchdog
+  static void watchdog_init()    IF_DISABLED(USE_WATCHDOG, {});
+  static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
+
+  static void init();                             // called early in setup()
+  static void init_board() {}                     // called less early in setup()
+  static void reboot() { NVIC_SystemReset(); }    // restart the firmware from 0x0
+
+  // Interrupts
+  static bool isr_state() { return !__get_PRIMASK(); }
+  static void isr_on() { sei(); }
+  static void isr_off() { cli(); }
+  static void delay_ms(const int ms) { delay(ms); }
+
+  // Tasks called from idle()
+  static void idletask() {}
+
+  // Reset
+  static uint8_t get_reset_source();
+  static void clear_reset_source() { RCU_I.clear_all_reset_flags(); }
+
+  // Free SRAM
+  static int freeMemory();
+
+  // ADC methods
+  static uint16_t adc_result;
+
+  // Called by Temperature::init once at startup
+  static void adc_init() { analogReadResolution(HAL_ADC_RESOLUTION); }
+
+  // Called by Temperature::init for each sensor at startup
+  static void adc_enable(const pin_t pin) { pinMode(pin, INPUT); }
+
+  // Called from Temperature::isr to start ADC sampling on the given pin
+  static void adc_start(const pin_t pin) { adc_result = static_cast<uint16_t>(analogRead(pin)); }
+
+  // Check if ADC is ready for reading
+  static bool adc_ready() { return true; }
+
+  // Current value of the ADC register
+  static uint16_t adc_value() { return adc_result; }
+
+  // Set the PWM duty cycle for the pin to the given value.
+  // Optionally invert the duty cycle [default = false]
+  // Optionally change the maximum size of the provided value to enable finer PWM duty control [default = 255]
+  static void set_pwm_duty(const pin_t pin, const uint16_t value, const uint16_t scale = 255U, const bool invert = false);
+
+  // Set the frequency of the timer for the given pin.
+  // All Timer PWM pins run at the same frequency.
+  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
+};

Marlin/src/HAL/GD32_MFL/MarlinSPI.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SPI.h>
+
+using MarlinSPI = SPIClass;

Marlin/src/HAL/GD32_MFL/MarlinSerial.cpp

@@ -0,0 +1,97 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfig.h"
+#include "MarlinSerial.h"
+
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+using namespace arduino;
+
+MarlinSerial& MarlinSerial::get_instance(usart::USART_Base Base, pin_size_t rxPin, pin_size_t txPin) {
+  UsartSerial& serial = UsartSerial::get_instance(Base, rxPin, txPin);
+  return *reinterpret_cast<MarlinSerial*>(&serial);
+}
+
+#if USING_HW_SERIAL0
+  MSerialT MSerial0(true, MarlinSerial::get_instance(usart::USART_Base::USART0_BASE, NO_PIN, NO_PIN));
+#endif
+#if USING_HW_SERIAL1
+  MSerialT MSerial1(true, MarlinSerial::get_instance(usart::USART_Base::USART1_BASE, NO_PIN, NO_PIN));
+#endif
+#if USING_HW_SERIAL2
+  MSerialT MSerial2(true, MarlinSerial::get_instance(usart::USART_Base::USART2_BASE, NO_PIN, NO_PIN));
+#endif
+#if USING_HW_SERIAL3
+  MSerialT MSerial3(true, MarlinSerial::get_instance(usart::USART_Base::UART3_BASE, NO_PIN, NO_PIN));
+#endif
+#if USING_HW_SERIAL4
+  MSerialT MSerial4(true, MarlinSerial::get_instance(usart::USART_Base::UART4_BASE, NO_PIN, NO_PIN));
+#endif
+
+#if ENABLED(EMERGENCY_PARSER)
+  // This callback needs to access the specific MarlinSerial instance
+  // We'll use a static pointer to track the current instance
+  static MarlinSerial* current_serial_instance = nullptr;
+
+  static void emergency_callback() {
+    if (!current_serial_instance) return;
+    const uint8_t last_data = current_serial_instance->get_last_data();
+    emergency_parser.update(current_serial_instance->emergency_state, last_data);
+  }
+
+  void MarlinSerial::register_emergency_callback(void (*callback)()) {
+    usart_.register_interrupt_callback(usart::Interrupt_Type::INTR_RBNEIE, callback);
+  }
+#endif
+
+void MarlinSerial::begin(unsigned long baudrate, uint16_t config) {
+  UsartSerial::begin(baudrate, config, ENABLED(SERIAL_DMA));
+  #if ENABLED(EMERGENCY_PARSER) && DISABLED(SERIAL_DMA)
+    current_serial_instance = this;
+    register_emergency_callback(emergency_callback);
+  #endif
+}
+
+void MarlinSerial::updateRxDmaBuffer() {
+  #if ENABLED(EMERGENCY_PARSER)
+    // Get the number of bytes available in the receive buffer
+    const size_t available_bytes = usart_.available_for_read(true);
+
+    // Process only the available data
+    for (size_t i = 0; i < available_bytes; ++i) {
+      uint8_t data;
+      if (usart_.read_rx_buffer(data))
+        emergency_parser.update(emergency_state, data);
+    }
+  #endif
+  // Call the base class implementation to handle any additional updates
+  UsartSerial::updateRxDmaBuffer();
+}
+
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/MarlinSerial.h

@@ -0,0 +1,75 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program. If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EMERGENCY_PARSER)
+  #include "../../feature/e_parser.h"
+#endif
+
+#include <UsartSerial.hpp>
+
+#include "../../core/serial_hook.h"
+
+#define SERIAL_INDEX_MIN 0
+#define SERIAL_INDEX_MAX 4
+
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
+#endif
+
+using namespace arduino;
+
+struct MarlinSerial : public UsartSerial {
+  static MarlinSerial& get_instance(usart::USART_Base Base, pin_size_t rxPin = NO_PIN, pin_size_t txPin = NO_PIN);
+
+  void begin(unsigned long baudrate, uint16_t config);
+  inline void begin(unsigned long baudrate) { begin(baudrate, SERIAL_8N1); }
+  void updateRxDmaBuffer();
+
+  #if DISABLED(SERIAL_DMA)
+    FORCE_INLINE static uint8_t buffer_overruns() { return 0; }
+  #endif
+
+  #if ENABLED(EMERGENCY_PARSER)
+    EmergencyParser::State emergency_state;
+
+    // Accessor method to get the last received byte
+    uint8_t get_last_data() { return usart_.get_last_data(); }
+
+    // Register the emergency callback
+    void register_emergency_callback(void (*callback)());
+  #endif
+
+protected:
+  using UsartSerial::UsartSerial;
+};
+
+typedef Serial1Class<MarlinSerial> MSerialT;
+extern MSerialT MSerial0;
+extern MSerialT MSerial1;
+extern MSerialT MSerial2;
+extern MSerialT MSerial3;
+extern MSerialT MSerial4;

Marlin/src/HAL/GD32_MFL/MinSerial.cpp

@@ -0,0 +1,163 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(POSTMORTEM_DEBUGGING)
+#include "../shared/MinSerial.h"
+
+// Base addresses for USART peripherals
+static constexpr uintptr_t USART_base[] = {
+  0x40013800, // USART0
+  0x40004400, // USART1
+  0x40004800, // USART2
+  0x40004C00, // UART3
+  0x40005000  // UART4
+};
+
+// Register offsets
+static constexpr uint32_t STAT0_OFFSET = 0x00U;
+static constexpr uint32_t DATA_OFFSET = 0x04U;
+static constexpr uint32_t BAUD_OFFSET = 0x08U;
+static constexpr uint32_t CTL0_OFFSET = 0x0CU;
+static constexpr uint32_t CTL1_OFFSET = 0x14U;
+
+// Bit positions
+static constexpr uint32_t TBE_BIT = 7;
+static constexpr uint32_t TEN_BIT = 3;
+static constexpr uint32_t UEN_BIT = 13;
+
+// NVIC interrupt numbers for USART
+static constexpr int nvicUART[] = { 37, 38, 39, 52, 53 };
+
+// RCU PCLK values for USART
+static constexpr rcu::RCU_PCLK clockRegs[] = {
+  rcu::RCU_PCLK::PCLK_USART0,
+  rcu::RCU_PCLK::PCLK_USART1,
+  rcu::RCU_PCLK::PCLK_USART2,
+  rcu::RCU_PCLK::PCLK_UART3,
+  rcu::RCU_PCLK::PCLK_UART4
+};
+
+// Memory barrier instructions
+#define isb() __asm__ __volatile__ ("isb" : : : "memory")
+#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
+#define sw_barrier() __asm__ volatile("" : : : "memory")
+
+// Direct register access macros
+#define USART_REG(offset) (*(volatile uint32_t*)(USART_base[SERIAL_PORT] + (offset)))
+#define USART_STAT0 USART_REG(STAT0_OFFSET)
+#define USART_DATA  USART_REG(DATA_OFFSET)
+#define USART_BAUD  USART_REG(BAUD_OFFSET)
+#define USART_CTL0  USART_REG(CTL0_OFFSET)
+#define USART_CTL1  USART_REG(CTL1_OFFSET)
+
+// Bit manipulation macros
+#define READ_BIT(reg, bit) (((reg) >> (bit)) & 1U)
+#define SET_BIT(reg, bit) ((reg) |= (1U << (bit)))
+#define CLEAR_BIT(reg, bit) ((reg) &= ~(1U << (bit)))
+
+// Initializes the MinSerial interface.
+// This function sets up the USART interface for serial communication.
+// If the selected serial port is not a hardware port, it disables the severe error reporting feature.
+static void MinSerialBegin() {
+  #if !WITHIN(SERIAL_PORT, 0, 4)
+    #warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
+    #warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
+  #else
+    int nvicIndex = nvicUART[SERIAL_PORT];
+
+    // NVIC base address for interrupt disable
+    struct NVICMin {
+      volatile uint32_t ISER[32];
+      volatile uint32_t ICER[32];
+    };
+    NVICMin *nvicBase = (NVICMin*)0xE000E100;
+
+    SBI32(nvicBase->ICER[nvicIndex >> 5], nvicIndex & 0x1F);
+
+    // We require memory barriers to properly disable interrupts
+    // (https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the)
+    dsb();
+    isb();
+
+    // Get the RCU PCLK for this USART
+    rcu::RCU_PCLK pclk = clockRegs[SERIAL_PORT];
+
+    // Disable then enable usart peripheral clocks
+    rcu::RCU_DEVICE.set_pclk_enable(pclk, false);
+    rcu::RCU_DEVICE.set_pclk_enable(pclk, true);
+
+    // Save current baudrate
+    uint32_t baudrate = USART_BAUD;
+
+    // Reset USART control registers
+    USART_CTL0 = 0;
+    USART_CTL1 = 0; // 1 stop bit
+
+    // Restore baudrate
+    USART_BAUD = baudrate;
+
+    // Enable transmitter and USART (8 bits, no parity, 1 stop bit)
+    SET_BIT(USART_CTL0, TEN_BIT);
+    SET_BIT(USART_CTL0, UEN_BIT);
+  #endif
+}
+
+// Writes a single character to the serial port.
+static void MinSerialWrite(char c) {
+  #if WITHIN(SERIAL_PORT, 0, 4)
+    // Wait until transmit buffer is empty
+    while (!READ_BIT(USART_STAT0, TBE_BIT)) {
+      hal.watchdog_refresh();
+      sw_barrier();
+    }
+    // Write character to data register
+    USART_DATA = c;
+  #endif
+}
+
+// Installs the minimum serial interface.
+// Sets the HAL_min_serial_init and HAL_min_serial_out function pointers to MinSerialBegin and MinSerialWrite respectively.
+void install_min_serial() {
+  HAL_min_serial_init = &MinSerialBegin;
+  HAL_min_serial_out = &MinSerialWrite;
+}
+
+extern "C" {
+  // A low-level assembly-based jump handler.
+  // Unconditionally branches to the CommonHandler_ASM function.
+  __attribute__((naked, aligned(4))) void JumpHandler_ASM() {
+    __asm__ __volatile__ ("b CommonHandler_ASM\n");
+  }
+  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) HardFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) BusFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) UsageFault_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) MemManage_Handler();
+  void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) NMI_Handler();
+}
+
+#endif // POSTMORTEM_DEBUGGING
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/README.md

@@ -0,0 +1,8 @@
+# Generic GD32 HAL based on the MFL Arduino Core
+
+This HAL is eventually intended to act as the generic HAL for all GD32 chips using the MFL library.
+
+Currently it supports:
+ * GD32F303RET6
+
+Targeting the official [MFL Arduino Core](https://github.com/bnmguy/ArduinoCore_MFL).

Marlin/src/HAL/GD32_MFL/Servo.cpp

@@ -0,0 +1,125 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfig.h"
+
+#if HAS_SERVOS
+
+#include "Servo.h"
+
+static uint_fast8_t servoCount = 0;
+static libServo* servos[NUM_SERVOS] = {0};
+constexpr millis_t servoDelay[] = SERVO_DELAY;
+static_assert(COUNT(servoDelay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
+
+// Initialize to the default timer priority. This will be overridden by a call from timers.cpp.
+// This allows all timer interrupt priorities to be managed from a single location in the HAL.
+static uint32_t servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), 12, 0);
+
+// This must be called after the MFL Servo class has initialized the timer.
+// To be safe this is currently called after every call to attach().
+static void fixServoTimerInterruptPriority() {
+  auto& servoTimerIdx = GeneralTimer::get_instance(static_cast<timer::TIMER_Base>(TIMER_SERVO));
+  NVIC_SetPriority(servoTimerIdx.getTimerUpIRQ(), servo_interrupt_priority);
+}
+
+// Default constructor for libServo class.
+// Initializes the servo delay, pause state, and pause value.
+// Registers the servo instance in the servos array.
+libServo::libServo() :
+  delay(servoDelay[servoCount]),
+  was_attached_before_pause(false),
+  value_before_pause(0)
+{
+  servos[servoCount++] = this;
+}
+
+// Attaches a servo to a specified pin.
+int8_t libServo::attach(const int pin) {
+  if (servoCount >= MAX_SERVOS) return -1;
+  if (pin > 0) servoPin = pin;
+  auto result = mflServo.attach(servoPin);
+  fixServoTimerInterruptPriority();
+  return result;
+}
+
+// Attaches a servo to a specified pin with minimum and maximum pulse widths.
+int8_t libServo::attach(const int pin, const int min, const int max) {
+  if (servoCount >= MAX_SERVOS) return -1;
+  if (pin > 0) servoPin = pin;
+  auto result = mflServo.attach(servoPin, min, max);
+  fixServoTimerInterruptPriority();
+  return result;
+}
+
+// Moves the servo to a specified position.
+void libServo::move(const int value) {
+  if (attach(0) >= 0) {
+    mflServo.write(value);
+    safe_delay(delay);
+    TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+  }
+}
+
+// Pause the servo by detaching it and storing its current state.
+void libServo::pause() {
+  was_attached_before_pause = mflServo.attached();
+  if (was_attached_before_pause) {
+    value_before_pause = mflServo.read();
+    mflServo.detach();
+  }
+}
+
+// Resume a previously paused servo.
+// If the servo was attached before the pause, this function re-attaches
+// the servo and moves it to the position it was in before the pause.
+void libServo::resume() {
+  if (was_attached_before_pause) {
+    attach();
+    move(value_before_pause);
+  }
+}
+
+// Pause all servos by stopping their timers.
+void libServo::pause_all_servos() {
+  for (auto& servo : servos)
+    if (servo) servo->pause();
+}
+
+// Resume all paused servos by starting their timers.
+void libServo::resume_all_servos() {
+  for (auto& servo : servos)
+    if (servo) servo->resume();
+}
+
+// Set the interrupt priority for the servo.
+// @param preemptPriority The preempt priority level.
+// @param subPriority The sub priority level.
+void libServo::setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority) {
+  servo_interrupt_priority = NVIC_EncodePriority(NVIC_GetPriorityGrouping(), preemptPriority, subPriority);
+}
+
+#endif // HAS_SERVOS
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/Servo.h

@@ -0,0 +1,56 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <Servo.h>
+
+#include "../../core/millis_t.h"
+
+// Inherit and expand on the official library
+class libServo {
+public:
+  libServo();
+
+  int8_t attach(const int pin = 0); // pin == 0 uses value from previous call
+  int8_t attach(const int pin, const int min, const int max);
+  void detach() { mflServo.detach(); }
+
+  int read() { return mflServo.read(); }
+  void move(const int value);
+
+  void pause();
+  void resume();
+
+  static void pause_all_servos();
+  static void resume_all_servos();
+
+  static void setInterruptPriority(uint32_t preemptPriority, uint32_t subPriority);
+
+private:
+  Servo mflServo;
+
+  int servoPin = 0;
+  millis_t delay = 0;
+
+  bool was_attached_before_pause;
+  int value_before_pause;
+};

Marlin/src/HAL/GD32_MFL/dogm/u8g_com_mfl_swspi.cpp

@@ -0,0 +1,129 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm / Ryan Power
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ALL(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
+
+#include <U8glib-HAL.h>
+#include "../../shared/HAL_SPI.h"
+
+#define nop asm volatile ("\tnop\n")
+
+static inline uint8_t swSpiTransfer_mode_0(uint8_t b) {
+  for (uint8_t i = 0; i < 8; ++i) {
+    const uint8_t state = (b & 0x80) ? HIGH : LOW;
+    WRITE(DOGLCD_SCK, HIGH);
+    WRITE(DOGLCD_MOSI, state);
+    b <<= 1;
+    WRITE(DOGLCD_SCK, LOW);
+  }
+  return b;
+}
+
+static inline uint8_t swSpiTransfer_mode_3(uint8_t b) {
+  for (uint8_t i = 0; i < 8; ++i) {
+    const uint8_t state = (b & 0x80) ? HIGH : LOW;
+    WRITE(DOGLCD_SCK, LOW);
+    WRITE(DOGLCD_MOSI, state);
+    b <<= 1;
+    WRITE(DOGLCD_SCK, HIGH);
+  }
+  return b;
+}
+
+static void u8g_sw_spi_shift_out(uint8_t val) {
+  #if U8G_SPI_USE_MODE_3
+    swSpiTransfer_mode_3(val);
+  #else
+    swSpiTransfer_mode_0(val);
+  #endif
+}
+
+static void swSpiInit() {
+  #if PIN_EXISTS(LCD_RESET)
+    SET_OUTPUT(LCD_RESET_PIN);
+  #endif
+  SET_OUTPUT(DOGLCD_A0);
+  OUT_WRITE(DOGLCD_SCK, LOW);
+  OUT_WRITE(DOGLCD_MOSI, LOW);
+  OUT_WRITE(DOGLCD_CS, HIGH);
+}
+
+uint8_t u8g_com_HAL_MFL_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+  switch (msg) {
+    case U8G_COM_MSG_INIT:
+      swSpiInit();
+      break;
+    case U8G_COM_MSG_STOP:
+      break;
+    case U8G_COM_MSG_RESET:
+      #if PIN_EXISTS(LCD_RESET)
+        WRITE(LCD_RESET_PIN, arg_val);
+      #endif
+      break;
+    case U8G_COM_MSG_CHIP_SELECT:
+      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
+                                    // the next chip select goes active
+          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
+          WRITE(DOGLCD_CS, LOW);
+          nop;                      // Hold SCK high for a few ns
+          nop;
+         }
+        else {
+          WRITE(DOGLCD_CS, HIGH);
+          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
+        }
+      #else
+        WRITE(DOGLCD_CS, !arg_val);
+      #endif
+      break;
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_sw_spi_shift_out(arg_val);
+      break;
+    case U8G_COM_MSG_WRITE_SEQ: {
+      uint8_t* ptr = (uint8_t*)arg_ptr;
+      while (arg_val > 0) {
+        u8g_sw_spi_shift_out(*ptr++);
+        arg_val--;
+      }
+    } break;
+    case U8G_COM_MSG_WRITE_SEQ_P: {
+      uint8_t* ptr = (uint8_t*)arg_ptr;
+      while (arg_val > 0) {
+        u8g_sw_spi_shift_out(u8g_pgm_read(ptr));
+        ptr++;
+        arg_val--;
+      }
+    } break;
+    case U8G_COM_MSG_ADDRESS:       // Define cmd (arg_val = 0) or data mode (arg_val = 1)
+      WRITE(DOGLCD_A0, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#endif // HAS_MARLINUI_U8GLIB && FORCE_SOFT_SPI
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_bl24cxx.cpp

@@ -0,0 +1,93 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */
+
+#include "../../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(IIC_BL24CXX_EEPROM)
+
+#include "../../shared/eeprom_if.h"
+#include "../../shared/eeprom_api.h"
+
+#ifndef MARLIN_EEPROM_SIZE
+  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
+#endif
+
+size_t PersistentStore::capacity() {
+  return MARLIN_EEPROM_SIZE - eeprom_exclude_size;
+}
+
+bool PersistentStore::access_start() {
+  eeprom_init();
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+  return true;
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
+  while (size--) {
+    uint8_t v = *value;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
+    // EPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      if (++written & 0x7F) delay(4); else safe_delay(4);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+
+  return false;
+}
+
+#endif // IIC_BL24CXX_EEPROM
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_if_iic.cpp

@@ -0,0 +1,54 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+/**
+ * Platform-independent Arduino functions for I2C EEPROM.
+ * Enable USE_SHARED_EEPROM if not supplied by the framework.
+ */
+
+#include "../../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(IIC_BL24CXX_EEPROM)
+
+#include "../../../libs/BL24CXX.h"
+#include "../../shared/eeprom_if.h"
+
+void eeprom_init() {
+  BL24CXX::init();
+}
+
+void eeprom_write_byte(uint8_t *pos, uint8_t value) {
+  const unsigned eeprom_address = (unsigned)pos;
+  return BL24CXX::writeOneByte(eeprom_address, value);
+}
+
+uint8_t eeprom_read_byte(uint8_t *pos) {
+  const unsigned eeprom_address = (unsigned)pos;
+  return BL24CXX::readOneByte(eeprom_address);
+}
+
+#endif // IIC_BL24CXX_EEPROM
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/eeprom/eeprom_wired.cpp

@@ -0,0 +1,96 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../../inc/MarlinConfig.h"
+
+#if USE_WIRED_EEPROM
+
+/**
+ * PersistentStore for Arduino-style EEPROM interface
+ * with simple implementations supplied by Marlin.
+ */
+
+#include "../../shared/eeprom_if.h"
+#include "../../shared/eeprom_api.h"
+
+#ifndef MARLIN_EEPROM_SIZE
+  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
+#endif
+
+size_t PersistentStore::capacity() {
+  return MARLIN_EEPROM_SIZE - eeprom_exclude_size;
+}
+
+bool PersistentStore::access_start() {
+  eeprom_init();
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+  return true;
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  uint16_t written = 0;
+  while (size--) {
+    uint8_t v = *value;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
+    // EEPROM has only ~100,000 write cycles,
+    // so only write bytes that have changed!
+    if (v != eeprom_read_byte(p)) {
+      eeprom_write_byte(p, v);
+      // Avoid triggering watchdog during long EEPROM writes
+      if (++written & 0x7F)
+        delay(2);
+      else
+        safe_delay(2);
+      if (eeprom_read_byte(p) != v) {
+        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+        return true;
+      }
+    }
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  do {
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
+    if (writing)
+      *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  } while (--size);
+
+  return false;
+}
+
+#endif // USE_WIRED_EEPROM
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/endstop_interrupts.h

@@ -0,0 +1,61 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../module/endstops.h"
+
+// One ISR for all EXT-Interrupts
+void endstop_ISR() { endstops.update(); }
+
+void setup_endstop_interrupts() {
+  #define _ATTACH(P) attachInterrupt(P, endstop_ISR, CHANGE)
+  TERN_(USE_X_MAX,       _ATTACH(X_MAX_PIN));
+  TERN_(USE_X_MIN,       _ATTACH(X_MIN_PIN));
+  TERN_(USE_Y_MAX,       _ATTACH(Y_MAX_PIN));
+  TERN_(USE_Y_MIN,       _ATTACH(Y_MIN_PIN));
+  TERN_(USE_Z_MAX,       _ATTACH(Z_MAX_PIN));
+  TERN_(USE_Z_MIN,       _ATTACH(Z_MIN_PIN));
+  TERN_(USE_X2_MAX,      _ATTACH(X2_MAX_PIN));
+  TERN_(USE_X2_MIN,      _ATTACH(X2_MIN_PIN));
+  TERN_(USE_Y2_MAX,      _ATTACH(Y2_MAX_PIN));
+  TERN_(USE_Y2_MIN,      _ATTACH(Y2_MIN_PIN));
+  TERN_(USE_Z2_MAX,      _ATTACH(Z2_MAX_PIN));
+  TERN_(USE_Z2_MIN,      _ATTACH(Z2_MIN_PIN));
+  TERN_(USE_Z3_MAX,      _ATTACH(Z3_MAX_PIN));
+  TERN_(USE_Z3_MIN,      _ATTACH(Z3_MIN_PIN));
+  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
+  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
+  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
+  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
+  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
+  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
+  TERN_(USE_J_MIN,       _ATTACH(J_MIN_PIN));
+  TERN_(USE_K_MAX,       _ATTACH(K_MAX_PIN));
+  TERN_(USE_K_MIN,       _ATTACH(K_MIN_PIN));
+  TERN_(USE_U_MAX,       _ATTACH(U_MAX_PIN));
+  TERN_(USE_U_MIN,       _ATTACH(U_MIN_PIN));
+  TERN_(USE_V_MAX,       _ATTACH(V_MAX_PIN));
+  TERN_(USE_V_MIN,       _ATTACH(V_MIN_PIN));
+  TERN_(USE_W_MAX,       _ATTACH(W_MAX_PIN));
+  TERN_(USE_W_MIN,       _ATTACH(W_MIN_PIN));
+}

Marlin/src/HAL/GD32_MFL/fast_pwm.cpp

@@ -0,0 +1,97 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfig.h"
+
+#include <PinOpsMap.hpp>
+#include <PinOps.hpp>
+#include "timers.h"
+
+static uint16_t timer_frequency[TIMER_COUNT];
+
+void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t value, const uint16_t scale, const bool invert) {
+  // Calculate duty cycle based on inversion flag
+  const uint16_t duty = invert ? scale - value : value;
+
+  // Check if the pin supports PWM
+  if (PWM_PIN(pin)) {
+    // Get the timer peripheral base associated with the pin
+    const auto timer_base = getPinOpsPeripheralBase<TIMERPinOps, timer::TIMER_Base>(TIMER_PinOps, static_cast<pin_size_t>(pin));
+
+    // Initialize the timer instance
+    auto& TimerInstance = GeneralTimer::get_instance(timer_base);
+
+    // Get channel and previous channel mode
+    const auto channel = getPackedPinChannel(getPackedPinOps(TIMER_PinOps, static_cast<pin_size_t>(pin)));
+    const InputOutputMode previous = TimerInstance.getChannelMode(channel);
+
+    if (timer_frequency[static_cast<size_t>(timer_base)] == 0) {
+      set_pwm_frequency(pin, PWM_FREQUENCY);
+    }
+
+    // Set the PWM duty cycle
+    TimerInstance.setCaptureCompare(channel, duty, CCFormat::B8);
+
+    // Configure pin as PWM output
+    pinOpsPinout(TIMER_PinOps, static_cast<pin_size_t>(pin));
+
+    // Set channel mode if not already set and start timer
+    if (previous != InputOutputMode::PWM0) {
+      TimerInstance.setChannelMode(channel, InputOutputMode::PWM0, static_cast<pin_size_t>(pin));
+      TimerInstance.start();
+    }
+  } else {
+    pinMode(pin, OUTPUT);
+    digitalWrite(pin, duty < scale / 2 ? LOW : HIGH);
+  }
+}
+
+void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
+  // Check if the pin supports PWM
+  if (!PWM_PIN(pin)) return;
+
+  // Get the timer peripheral base associated with the pin
+  const auto timer_base = getPinOpsPeripheralBase<TIMERPinOps, timer::TIMER_Base>(TIMER_PinOps, static_cast<pin_size_t>(pin));
+
+  // Guard against modifying protected timers
+  #ifdef STEP_TIMER
+    if (timer_base == static_cast<timer::TIMER_Base>(STEP_TIMER)) return;
+  #endif
+  #ifdef TEMP_TIMER
+    if (timer_base == static_cast<timer::TIMER_Base>(TEMP_TIMER)) return;
+  #endif
+  #if defined(PULSE_TIMER) && MF_TIMER_PULSE != MF_TIMER_STEP
+    if (timer_base == static_cast<timer::TIMER_Base>(PULSE_TIMER)) return;
+  #endif
+
+  // Initialize the timer instance
+  auto& TimerInstance = GeneralTimer::get_instance(timer_base);
+
+  TimerInstance.setRolloverValue(f_desired, TimerFormat::HERTZ);
+  timer_frequency[timer_base_to_index(timer_base)] = f_desired;
+}
+
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/fastio.h

@@ -0,0 +1,85 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Fast I/O interfaces for GD32F303RE
+
+#include <GPIO.hpp>
+#include <PinOps.hpp>
+#include <PinOpsMap.hpp>
+
+template<typename T>
+static inline void fast_write_pin_wrapper(pin_size_t IO, T V) {
+  auto port = getPortFromPin(IO);
+  auto pin = getPinInPort(IO);
+  if (static_cast<bool>(V)) gpio::fast_set_pin(port, pin);
+  else                      gpio::fast_clear_pin(port, pin);
+}
+
+static inline bool fast_read_pin_wrapper(pin_size_t IO) {
+  return gpio::fast_read_pin(getPortFromPin(IO), getPinInPort(IO));
+}
+
+static inline void fast_toggle_pin_wrapper(pin_size_t IO) {
+  gpio::fast_toggle_pin(getPortFromPin(IO), getPinInPort(IO));
+}
+
+// ------------------------
+// Defines
+// ------------------------
+
+#ifndef PWM
+  #define PWM OUTPUT
+#endif
+
+#define _WRITE(IO, V)           fast_write_pin_wrapper(IO, V)
+#define _READ(IO)               fast_read_pin_wrapper(IO)
+#define _TOGGLE(IO)             fast_toggle_pin_wrapper(IO)
+
+#define _GET_MODE(IO)
+#define _SET_MODE(IO, M)        pinMode((IO), (M))
+#define _SET_OUTPUT(IO)         pinMode((IO), OUTPUT)
+#define _SET_OUTPUT_OD(IO)      pinMode((IO), OUTPUT_OPEN_DRAIN)
+
+#define WRITE(IO, V)            _WRITE((IO), (V))
+#define READ(IO)                _READ(IO)
+#define TOGGLE(IO)              _TOGGLE(IO)
+
+#define OUT_WRITE(IO, V)        do { _SET_OUTPUT(IO); WRITE((IO), (V)); } while (0)
+#define OUT_WRITE_OD(IO, V)     do { _SET_OUTPUT_OD(IO); WRITE((IO), (V)); } while (0)
+
+#define SET_INPUT(IO)           _SET_MODE((IO), INPUT)
+#define SET_INPUT_PULLUP(IO)    _SET_MODE((IO), INPUT_PULLUP)
+#define SET_INPUT_PULLDOWN(IO)  _SET_MODE((IO), INPUT_PULLDOWN)
+#define SET_OUTPUT(IO)          OUT_WRITE((IO), LOW)
+#define SET_OUTPUT_OD(IO)       OUT_WRITE_OD((IO), LOW)
+#define SET_PWM(IO)             _SET_MODE((IO), PWM)
+
+#define IS_INPUT(IO)
+#define IS_OUTPUT(IO)
+
+#define PWM_PIN(P)              isPinInPinOps(TIMER_PinOps, P)
+#define NO_COMPILE_TIME_PWM
+
+// Wrappers for digitalRead and digitalWrite
+#define extDigitalRead(IO)      digitalRead(IO)
+#define extDigitalWrite(IO, V)  digitalWrite((IO), (V))

Marlin/src/HAL/GD32_MFL/inc/Conditionals_LCD.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if ALL(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
+  #define U8G_SW_SPI_MFL 1
+#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_adv.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#if ALL(HAS_MEDIA, USBD_USE_CDC_MSC)
+  #define HAS_SD_HOST_DRIVE 1
+#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_post.h

@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// If no real or emulated EEPROM selected, fall back to SD emulation
+#if USE_FALLBACK_EEPROM
+  #define SDCARD_EEPROM_EMULATION
+#elif ANY(I2C_EEPROM, SPI_EEPROM)
+  #define USE_SHARED_EEPROM 1
+#endif

Marlin/src/HAL/GD32_MFL/inc/Conditionals_type.h

@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once

Marlin/src/HAL/GD32_MFL/inc/SanityCheck.h

@@ -0,0 +1,97 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// Test MFL GD32 specific configuration values for errors at compile-time.
+#if ENABLED(SDCARD_EEPROM_EMULATION) && !HAS_MEDIA
+  #undef SDCARD_EEPROM_EMULATION  // avoid additional error noise
+  #if USE_FALLBACK_EEPROM
+    #warning "EEPROM type not specified. Fallback is SDCARD_EEPROM_EMULATION."
+  #endif
+  #error "SDCARD_EEPROM_EMULATION requires SDSUPPORT. Enable SDSUPPORT or choose another EEPROM emulation."
+#endif
+
+#if ENABLED(FLASH_EEPROM_LEVELING)
+  #error "FLASH_EEPROM_LEVELING is not supported on GD32."
+#endif
+
+#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
+  #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on GD32."
+#elif ENABLED(SERIAL_STATS_DROPPED_RX)
+  #error "SERIAL_STATS_DROPPED_RX is not supported on GD32."
+#endif
+
+#if TEMP_SENSOR_SOC && defined(ATEMP) && TEMP_SOC_PIN != ATEMP
+  #error "TEMP_SENSOR_SOC requires 'TEMP_SOC_PIN ATEMP' on GD32"
+#endif
+
+// Check for common serial pin conflicts
+#define _CHECK_SERIAL_PIN(N) (( \
+    BTN_EN1 == N || BTN_EN2 == N || DOGLCD_CS == N || HEATER_BED_PIN == N || FAN0_PIN == N || \
+    SDIO_D2_PIN == N || SDIO_D3_PIN == N || SDIO_CK_PIN == N || SDIO_CMD_PIN == N || \
+    Y_STEP_PIN == N || Y_ENABLE_PIN == N || E0_ENABLE_PIN == N || POWER_LOSS_PIN == N \
+  ))
+
+#define CHECK_SERIAL_PIN(T, N) defined(UART##N##_##T##_PIN) && _CHECK_SERIAL_PIN(UART##N##_##T##_PIN)
+
+#if SERIAL_IN_USE(0)
+  #if CHECK_SERIAL_PIN(TX, 0)
+    #error "Serial Port 0 TX IO pins conflict with another pin on the board."
+  #endif
+  #if CHECK_SERIAL_PIN(RX, 0)
+    #error "Serial Port 0 RX IO pins conflict with another pin on the board."
+  #endif
+#endif
+#if SERIAL_IN_USE(1)
+  #if CHECK_SERIAL_PIN(TX, 1)
+    #error "Serial Port 1 TX IO pins conflict with another pin on the board."
+  #endif
+  #if CHECK_SERIAL_PIN(RX, 1)
+    #error "Serial Port 1 RX IO pins conflict with another pin on the board."
+  #endif
+#endif
+#if SERIAL_IN_USE(2)
+  #if CHECK_SERIAL_PIN(TX, 2)
+    #error "Serial Port 2 TX IO pins conflict with another pin on the board."
+  #endif
+  #if CHECK_SERIAL_PIN(RX, 2)
+    #error "Serial Port 2 RX IO pins conflict with another pin on the board."
+  #endif
+#endif
+#if SERIAL_IN_USE(3)
+  #if CHECK_SERIAL_PIN(TX, 3)
+    #error "Serial Port 3 TX IO pins conflict with another pin on the board."
+  #endif
+  #if CHECK_SERIAL_PIN(RX, 3)
+    #error "Serial Port 3 RX IO pins conflict with another pin on the board."
+  #endif
+#endif
+#if SERIAL_IN_USE(4)
+  #if CHECK_SERIAL_PIN(TX, 4)
+    #error "Serial Port 4 TX IO pins conflict with another pin on the board."
+  #endif
+  #if CHECK_SERIAL_PIN(RX, 4)
+    #error "Serial Port 4 RX IO pins conflict with another pin on the board."
+  #endif
+#endif
+#undef CHECK_SERIAL_PIN
+#undef _CHECK_SERIAL_PIN

Marlin/src/HAL/GD32_MFL/pinsDebug.h

@@ -0,0 +1,102 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * Pins Debugging for GD32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
+#include "../../inc/MarlinConfig.h"
+#include <Arduino.h>
+#include <PinOps.hpp>
+#include <Analog.h>
+
+#ifndef TOTAL_PIN_COUNT
+  #error "Expected TOTAL_PIN_COUNT not found."
+#endif
+
+#define NUM_DIGITAL_PINS  TOTAL_PIN_COUNT
+#define NUMBER_PINS_TOTAL TOTAL_PIN_COUNT
+
+#define getPinByIndex(x) pin_t(pin_array[x].pin)
+#define isValidPin(P) WITHIN(P, 0, (NUM_DIGITAL_PINS - 1))
+#define digitalRead_mod(P) extDigitalRead(P)
+#define printPinNumber(P) do { sprintf_P(buffer, PSTR("%3hd "), pin_t(P)); SERIAL_ECHO(buffer); } while (0)
+#define printPinAnalog(P) do { sprintf_P(buffer, PSTR(" (A%2d)  "), pin_t(getAdcChannelFromPin(P))); SERIAL_ECHO(buffer); } while (0)
+#define printPinNameByIndex(x) do { sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); } while (0)
+
+#define MULTI_NAME_PAD 21 // Space needed to be pretty if not first name assigned to a pin
+
+#ifndef M43_NEVER_TOUCH
+  #define M43_NEVER_TOUCH(x) WITHIN(x, 9, 10) // SERIAL pins: PA9(TX) PA10(RX)
+#endif
+
+bool isAnalogPin(const pin_t pin) {
+  if (!isValidPin(pin)) return false;
+
+  if (getAdcChannel(pin) != adc::ADC_Channel::INVALID) {
+    auto& instance = gpio::GPIO::get_instance(getPortFromPin(pin)).value();
+    return instance.get_pin_mode(getPinInPort(pin)) == gpio::Pin_Mode::ANALOG && !M43_NEVER_TOUCH(pin);
+  }
+
+  return false;
+}
+
+bool getValidPinMode(const pin_t pin) {
+  if (!isValidPin(pin)) return false;
+
+  auto& instance = gpio::GPIO::get_instance(getPortFromPin(pin)).value();
+  gpio::Pin_Mode mode = instance.get_pin_mode(getPinInPort(pin));
+
+  return mode != gpio::Pin_Mode::ANALOG && mode != gpio::Pin_Mode::INPUT_FLOATING &&
+         mode != gpio::Pin_Mode::INPUT_PULLUP && mode != gpio::Pin_Mode::INPUT_PULLDOWN;
+}
+
+bool getPinIsDigitalByIndex(const int16_t index) {
+  const pin_t pin = getPinByIndex(index);
+  return (!isAnalogPin(pin));
+}
+
+int8_t digitalPinToAnalogIndex(const pin_t pin) {
+  if (!isValidPin(pin) || !isAnalogPin(pin)) return -1;
+  return pin; // Analog and digital pin indexes are shared
+}
+
+bool pwm_status(const pin_t pin) { return false; }
+void printPinPWM(const pin_t pin) { /* TODO */ }
+void printPinPort(const pin_t pin) { /* TODO */ }

Marlin/src/HAL/GD32_MFL/sd/SDCard.h

@@ -0,0 +1,214 @@
+//
+// MFL gd32f30x SDCARD using DMA through SDIO in C++
+//
+// Copyright (C) 2025 B. Mourit <bnmguy@gmail.com>
+//
+// This software is free software: you can redistribute it and/or modify it under the terms of the
+// GNU Lesser General Public License as published by the Free Software Foundation,
+// either version 3 of the License, or (at your option) any later version.
+//
+// This software is distributed in the hope that it will be useful, but WITHOUT ANY WARRANTY;
+// without even the implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
+// See the GNU Lesser General Public License for more details.
+//
+// You should have received a copy of the GNU Lesser General Public License along with this software.
+// If not, see <https://www.gnu.org/licenses/>.
+//
+#pragma once
+
+#include "../../../inc/MarlinConfig.h"
+
+#include <SDIO.hpp>
+
+namespace sdio {
+
+class DMA;
+
+class CardDMA {
+public:
+  static CardDMA& get_instance();
+
+  SDIO_Error_Type init();
+  SDIO_Error_Type card_init();
+  SDIO_Error_Type begin_startup_procedure();
+  void begin_shutdown_procedure();
+  // Configuration
+  SDIO_Error_Type set_hardware_bus_width(Bus_Width width);
+  // Main read/write functions for single and multiblock transfers
+  SDIO_Error_Type read(uint8_t* buf, uint32_t address, uint32_t count);
+  SDIO_Error_Type write(uint8_t* buf, uint32_t address, uint32_t count);
+  // DMA transfers
+  // Other card functions
+  SDIO_Error_Type erase(uint32_t address_start, uint32_t address_end);
+  // Interrupt handler
+  void handle_interrupts();
+  // Card select
+  SDIO_Error_Type select_deselect();
+
+  SDIO_Error_Type get_card_interface_status(uint32_t* status);
+  SDIO_Error_Type get_sdcard_status(uint32_t* status);
+
+  void check_dma_complete();
+  SDIO_Error_Type stop_transfer();
+
+  Transfer_State get_transfer_state();
+  uint32_t get_card_capacity() const;
+
+  SDIO_Error_Type send_bus_width_command(uint32_t width_value);
+
+  SDIO_Error_Type get_card_specific_data(Card_Info* info);
+  constexpr Block_Size get_data_block_size_index(uint16_t size);
+
+  SDIO_Error_Type get_card_state(Card_State* card_state);
+  SDIO_Error_Type check_sdio_status(Command_Index index = Command_Index::INVALID, bool check_index = false, bool ignore_crc = false);
+
+  // DMA configuration
+  void set_dma_parameters(uint8_t* buf, uint32_t count, bool is_write);
+
+  // SDIO configuration
+  void sdio_configure(const SDIO_Config config) { sdio_.init(config); }
+
+  // Varaible stored parameters
+  SDIO_Error_Type get_scr(uint16_t rca, uint32_t* scr);
+  SDIO_Error_Type store_cid();
+  SDIO_Error_Type store_csd();
+
+  // Accessor methods
+  SDIO_Config& get_config() { return config_; }
+  dma::DMA& get_dma_instance() { return dma_; }
+  void set_data_end_interrupt() { sdio_.set_interrupt_enable(Interrupt_Type::DTENDIE, true); }
+  void set_sdio_dma_enable(bool enable) { sdio_.set_dma_enable(enable); }
+  bool get_is_sdio_rx() { return is_rx_; }
+  void clear_sdio_data_flags() { sdio_.clear_multiple_interrupt_flags(clear_data_flags); }
+  void clear_sdio_cmd_flags() { sdio_.clear_multiple_interrupt_flags(clear_command_flags); }
+  void clear_sdio_common_flags() { sdio_.clear_multiple_interrupt_flags(clear_common_flags); }
+  Operational_State get_state() { return current_state_; }
+  void set_state(Operational_State state) { current_state_ = state; }
+  void set_transfer_end(bool value) { transfer_end_ = value; }
+  void set_transfer_error(SDIO_Error_Type error) { transfer_error_ = error; }
+
+  inline SDIO_Error_Type set_desired_clock(uint32_t desired_clock, bool wide_bus, bool low_power) {
+    sdio_.init({
+      desired_clock,
+      Clock_Edge::RISING_EDGE,
+      wide_bus ? Bus_Width::WIDTH_4BIT : Bus_Width::WIDTH_1BIT,
+      false,
+      low_power,
+      false
+    });
+    sync_domains();
+    desired_clock_ = desired_clock;
+
+    return SDIO_Error_Type::OK;
+  }
+
+private:
+  CardDMA();
+
+  // Prevent copying or assigning
+  CardDMA(const CardDMA&) = delete;
+  CardDMA& operator=(const CardDMA&) = delete;
+
+  // Helper function
+  SDIO_Error_Type wait_for_card_ready();
+
+  // Member variables
+  alignas(4) uint32_t sdcard_csd_[4];
+  alignas(4) uint32_t sdcard_cid_[4];
+  alignas(4) uint32_t sdcard_scr_[2];
+  uint32_t desired_clock_;
+  uint32_t stop_condition_;
+  uint32_t total_bytes_;
+  uint32_t count_;
+  SDIO& sdio_;
+  SDIO_Config& config_;
+  const dma::DMA_Base dmaBase_;
+  const dma::DMA_Channel dmaChannel_;
+  dma::DMA& dma_;
+  uint16_t sdcard_rca_;
+  SDIO_Error_Type transfer_error_;
+  Interface_Version interface_version_;
+  Card_Type card_type_;
+  volatile bool transfer_end_;
+  volatile bool is_rx_;
+  volatile bool multiblock_;
+  volatile Operational_State current_state_;
+
+  // Private helper methods
+  SDIO_Error_Type validate_voltage();
+  SDIO_Error_Type get_r1_result(Command_Index index);
+  //SDIO_Error_Type get_r2_r3_result();
+  SDIO_Error_Type get_r6_result(Command_Index index, uint16_t* rca);
+  SDIO_Error_Type get_r7_result();
+  //SDIO_Error_Type get_r1_error_type(uint32_t response);
+  SDIO_Error_Type get_command_sent_result();
+
+  inline void sync_domains() {
+    delayMicroseconds(8);
+  }
+
+  inline bool validate_transfer_params(uint32_t* buf, uint16_t size) {
+    if (buf == nullptr) return false;
+    // Size must be > 0, <= 2048 and power of 2
+    if ((size == 0U) || (size > 2048U) || (size & (size - 1U))) {
+      return false;
+    }
+    return true;
+  }
+
+  void process_sdsc_specific_csd(Card_Info* info, const uint8_t* csd_bytes) {
+    info->csd.device_size = (static_cast<uint32_t>(csd_bytes[6] & 0x03U) << 10U) |
+                 (static_cast<uint32_t>(csd_bytes[7]) << 2U) |
+                 (static_cast<uint32_t>((csd_bytes[8] & 0xC0U) >> 6U));
+    info->csd.device_size_multiplier = static_cast<uint8_t>((csd_bytes[9] & 0x03U) << 1U |
+                                 (csd_bytes[10] & 0x80U) >> 7U);
+
+    info->block_size = static_cast<uint32_t>(1 << info->csd.read_block_length);
+    info->capacity = static_cast<uint32_t>((info->csd.device_size + 1U) *
+            (1U << (info->csd.device_size_multiplier + 2U)) *
+            info->block_size);
+  }
+
+  void process_sdhc_specific_csd(Card_Info* info, const uint8_t* csd_bytes) {
+    info->csd.device_size = static_cast<uint32_t>((csd_bytes[7] & 0x3FU) << 16U) |
+                 static_cast<uint32_t>((csd_bytes[8]) << 8U) |
+                 static_cast<uint32_t>(csd_bytes[9]);
+
+    info->block_size = BLOCK_SIZE;
+    info->capacity = static_cast<uint32_t>((info->csd.device_size + 1U) *
+            BLOCK_SIZE * KILOBYTE);
+  }
+
+  void process_common_csd_tail(Card_Info* info, const uint8_t* csd_bytes) {
+    info->csd.sector_size = static_cast<uint8_t>(((csd_bytes[9] & 0x3FU) << 1U) |
+                          (csd_bytes[10] & 0x80U) >> 7U);
+    info->csd.speed_factor = static_cast<uint8_t>((csd_bytes[11] & 0x1CU) >> 2U);
+    info->csd.write_block_length = static_cast<uint8_t>(((csd_bytes[11] & 0x03U) << 2U) |
+                              ((csd_bytes[12] & 0xC0U) >> 6U));
+    info->csd.checksum = static_cast<uint8_t>((csd_bytes[15] & 0xFEU) >> 1U);
+  }
+
+  inline void disable_all_interrupts() {
+    sdio_.set_interrupt_enable(Interrupt_Type::DTCRCERRIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::DTTMOUTIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::DTENDIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::STBITEIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::TFHIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::RFHIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::TXUREIE, false);
+    sdio_.set_interrupt_enable(Interrupt_Type::RXOREIE, false);
+  }
+
+  template <typename CheckFunc>
+  inline SDIO_Error_Type send_command_and_check(Command_Index command, uint32_t argument,
+           Command_Response response, Wait_Type type, CheckFunc check_result) {
+    sdio_.set_command_state_machine(command, argument, response, type);
+    sync_domains();
+    sdio_.set_command_state_machine_enable(true);
+    return check_result();
+  }
+};
+
+} // namespace sdio
+
+extern sdio::CardDMA& CardDMA_I;

Marlin/src/HAL/GD32_MFL/sd/sdio.cpp

@@ -0,0 +1,231 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#include "../../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ENABLED(ONBOARD_SDIO)
+
+#include <PinOpsMap.hpp>
+#include <PinOps.hpp>
+#include "SDCard.h"
+#include "sdio.h"
+
+using namespace sdio;
+
+#define TARGET_CLOCK  6000000U
+#define BLOCK_SIZE    512U
+#define CARD_TIMEOUT  500 // ms
+#define READ_RETRIES  3U
+
+inline constexpr uint32_t TARGET_SDIO_CLOCK = TARGET_CLOCK;
+inline constexpr uint32_t SDIO_BLOCK_SIZE = BLOCK_SIZE;
+inline constexpr uint32_t SD_TIMEOUT = CARD_TIMEOUT;
+inline constexpr uint8_t SDIO_READ_RETRIES = READ_RETRIES;
+
+Card_State cardState = Card_State::READY;
+
+bool SDIO_SetBusWidth(Bus_Width width) {
+  return (CardDMA_I.set_hardware_bus_width(width) == SDIO_Error_Type::OK);
+}
+
+void mfl_sdio_init() {
+  pinOpsPinout(SD_CMD_PinOps, static_cast<pin_size_t>(SDIO_CMD_PIN));
+  pinOpsPinout(SD_CK_PinOps, static_cast<pin_size_t>(SDIO_CK_PIN));
+  pinOpsPinout(SD_DATA0_PinOps, static_cast<pin_size_t>(SDIO_D0_PIN));
+  pinOpsPinout(SD_DATA1_PinOps, static_cast<pin_size_t>(SDIO_D1_PIN));
+  pinOpsPinout(SD_DATA2_PinOps, static_cast<pin_size_t>(SDIO_D2_PIN));
+  pinOpsPinout(SD_DATA3_PinOps, static_cast<pin_size_t>(SDIO_D3_PIN));
+
+  NVIC_EnableIRQ(DMA1_Channel3_4_IRQn);
+  NVIC_EnableIRQ(SDIO_IRQn);
+}
+
+bool SDIO_Init() {
+  SDIO_Error_Type result = SDIO_Error_Type::OK;
+  uint8_t retryCount = SDIO_READ_RETRIES;
+
+  mfl_sdio_init();
+
+  uint8_t retries = retryCount;
+  for (;;) {
+    hal.watchdog_refresh();
+    result = CardDMA_I.init();
+    if (result == SDIO_Error_Type::OK) break;
+    if (!--retries) return false;
+  }
+
+  CardDMA_I.set_desired_clock(TARGET_SDIO_CLOCK, false, false);
+
+  retries = retryCount;
+  for (;;) {
+    hal.watchdog_refresh();
+    if (SDIO_SetBusWidth(Bus_Width::WIDTH_4BIT)) break;
+    if (!--retries) break;
+  }
+
+  CardDMA_I.set_desired_clock(TARGET_SDIO_CLOCK, true, true);
+
+  // Fallback
+  if (!retries) {
+    mfl_sdio_init();
+    retries = retryCount;
+    for (;;) {
+      hal.watchdog_refresh();
+      result = CardDMA_I.init();
+      if (result == SDIO_Error_Type::OK) break;
+      if (!--retries) return false;
+    }
+    CardDMA_I.set_desired_clock(TARGET_SDIO_CLOCK, false, true);
+  }
+
+  return true;
+}
+
+static bool SDIO_ReadWriteBlock_DMA(uint32_t block, const uint8_t* src, uint8_t* dst) {
+  hal.watchdog_refresh();
+  SDIO_Error_Type result = SDIO_Error_Type::OK;
+
+  // Write
+  if (src) {
+    result = CardDMA_I.write(reinterpret_cast<uint8_t*>(const_cast<uint8_t*>(src)), block, 1);
+  }
+  // Read
+  else {
+    result = CardDMA_I.read(dst, block, 1);
+  }
+
+  if (result != SDIO_Error_Type::OK) {
+    return false;
+  }
+
+  millis_t timeout = millis() + SD_TIMEOUT;
+  while (CardDMA_I.get_state() != sdio::Operational_State::READY) {
+    if (ELAPSED(millis(), timeout)) {
+      return false;
+    }
+  }
+
+  CardDMA_I.check_dma_complete();
+
+  timeout = millis() + SD_TIMEOUT;
+  do {
+    result = CardDMA_I.get_card_state(&cardState);
+    if (ELAPSED(millis(), timeout)) {
+      return false;
+    }
+  } while (result == SDIO_Error_Type::OK && cardState != sdio::Card_State::TRANSFER);
+
+  return true;
+}
+
+bool SDIO_ReadBlock(uint32_t block, uint8_t* dst) {
+  // Check if the address is aligned to 4 bytes
+  if (reinterpret_cast<uint32_t>(dst) & 0x03) {
+    return false;
+  }
+
+  uint8_t retries = SDIO_READ_RETRIES;
+  while (retries--) {
+    if (SDIO_ReadWriteBlock_DMA(block, nullptr, dst)) {
+      return true;
+    }
+  }
+
+  return false;
+}
+
+bool SDIO_WriteBlock(uint32_t block, const uint8_t* src) {
+  // Check if the address is aligned to 4 bytes
+  if (reinterpret_cast<uint32_t>(src) & 0x03) {
+    return false;
+  }
+
+  uint8_t retries = SDIO_READ_RETRIES;
+  while (retries--) {
+    if (SDIO_ReadWriteBlock_DMA(block, src, nullptr)) {
+      return true;
+      delay(10);
+    }
+  }
+
+  return false;
+}
+
+bool SDIO_IsReady() {
+  return (CardDMA_I.get_state() == sdio::Operational_State::READY);
+}
+
+uint32_t SDIO_GetCardSize() {
+  return CardDMA_I.get_card_capacity();
+}
+
+// DMA interrupt handler
+void DMA1_IRQHandler() {
+  auto& dma_instance = CardDMA_I.get_dma_instance();
+  bool is_receive = CardDMA_I.get_is_sdio_rx();
+
+  // Check for Transfer Complete Interrupt
+  if (dma_instance.get_interrupt_flag(dma::Interrupt_Flags::INTR_FLAG_FTFIF)) {
+    dma_instance.set_interrupt_enable(dma::Interrupt_Type::INTR_FTFIE, false);
+    dma_instance.set_interrupt_enable(dma::Interrupt_Type::INTR_ERRIE, false);
+    dma_instance.clear_interrupt_flag(dma::Interrupt_Flags::INTR_FLAG_FTFIF);
+    if (is_receive) {
+      CardDMA_I.set_sdio_dma_enable(false);
+      CardDMA_I.clear_sdio_data_flags();
+      CardDMA_I.set_state(sdio::Operational_State::READY);
+    } else {
+      CardDMA_I.set_data_end_interrupt();
+    }
+    // Signal that transfer is complete
+    CardDMA_I.set_transfer_end(true);
+  }
+
+  else if (dma_instance.get_interrupt_flag(dma::Interrupt_Flags::INTR_FLAG_ERRIF)) {
+    dma_instance.set_interrupt_enable(dma::Interrupt_Type::INTR_HTFIE, false);
+    dma_instance.set_interrupt_enable(dma::Interrupt_Type::INTR_ERRIE, false);
+    dma_instance.set_interrupt_enable(dma::Interrupt_Type::INTR_FTFIE, false);
+    // Clear all flags
+    dma_instance.clear_interrupt_flag(dma::Interrupt_Flags::INTR_FLAG_GIF);
+    // Signal that an error occurred
+    CardDMA_I.set_transfer_error(SDIO_Error_Type::ERROR);
+    CardDMA_I.set_state(sdio::Operational_State::READY);
+  }
+}
+
+extern "C" {
+
+  void SDIO_IRQHandler(void) {
+    CardDMA_I.handle_interrupts();
+  }
+
+  void DMA1_Channel3_4_IRQHandler(void) {
+    DMA1_IRQHandler();
+  }
+
+} // extern "C"
+
+#endif // ONBOARD_SDIO
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/sd/sdio.h

@@ -0,0 +1,36 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include <SDIO.hpp>
+#include <DMA.hpp>
+
+#define SDIO_D0_PIN   PC8
+#define SDIO_D1_PIN   PC9
+#define SDIO_D2_PIN   PC10
+#define SDIO_D3_PIN   PC11
+#define SDIO_CK_PIN   PC12
+#define SDIO_CMD_PIN  PD2
+
+void sdio_mfl_init();
+bool SDIO_SetBusWidth(sdio::Bus_Width width);
+void DMA1_IRQHandler(dma::DMA_Channel channel);

Marlin/src/HAL/GD32_MFL/spi_pins.h

@@ -0,0 +1,32 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ */
+#pragma once
+
+// Define SPI Pins: SCK, MISO, MOSI
+#ifndef SD_SCK_PIN
+  #define SD_SCK_PIN  PIN_SPI_SCK
+#endif
+#ifndef SD_MISO_PIN
+  #define SD_MISO_PIN PIN_SPI_MISO
+#endif
+#ifndef SD_MOSI_PIN
+  #define SD_MOSI_PIN PIN_SPI_MOSI
+#endif

Marlin/src/HAL/GD32_MFL/temp_soc.h

@@ -0,0 +1,29 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#define TS_TYPICAL_V      1.405
+#define TS_TYPICAL_TEMP   25
+#define TS_TYPICAL_SLOPE  4.5
+
+// TODO: Implement voltage scaling (calibrated Vrefint) and ADC resolution scaling (when applicable)
+#define TEMP_SOC_SENSOR(RAW) ((TS_TYPICAL_V - (RAW) / float(OVERSAMPLENR) / float(HAL_ADC_RANGE) * (float(ADC_VREF_MV) / 1000)) / ((TS_TYPICAL_SLOPE) / 1000) + TS_TYPICAL_TEMP)

Marlin/src/HAL/GD32_MFL/timers.cpp

@@ -0,0 +1,233 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#include "../platforms.h"
+
+#ifdef ARDUINO_ARCH_MFL
+
+#include "../../inc/MarlinConfig.h"
+#include "timers.h"
+
+// ------------------------
+// Local defines
+// ------------------------
+
+#define SWSERIAL_TIMER_IRQ_PRIORITY_DEFAULT 1   // Requires tight bit timing to communicate reliably with TMC drivers
+#define SERVO_TIMER_IRQ_PRIORITY_DEFAULT    1   // Requires tight PWM timing to control a BLTouch reliably
+#define STEP_TIMER_IRQ_PRIORITY_DEFAULT     2
+#define TEMP_TIMER_IRQ_PRIORITY_DEFAULT     14  // Low priority avoids interference with other hardware and timers
+
+#ifndef TIMER_IRQ_PRIORITY
+  #define TIMER_IRQ_PRIORITY 12
+#endif
+
+#ifndef STEP_TIMER_IRQ_PRIORITY
+  #define STEP_TIMER_IRQ_PRIORITY STEP_TIMER_IRQ_PRIORITY_DEFAULT
+#endif
+
+#ifndef TEMP_TIMER_IRQ_PRIORITY
+  #define TEMP_TIMER_IRQ_PRIORITY TEMP_TIMER_IRQ_PRIORITY_DEFAULT
+#endif
+
+#if HAS_TMC_SW_SERIAL
+  #include <SoftwareSerial.h>
+  #ifndef SWSERIAL_TIMER_IRQ_PRIORITY
+    #define SWSERIAL_TIMER_IRQ_PRIORITY SWSERIAL_TIMER_IRQ_PRIORITY_DEFAULT
+  #endif
+#endif
+
+#if HAS_SERVOS
+  #include "Servo.h"
+  #ifndef SERVO_TIMER_IRQ_PRIORITY
+    #define SERVO_TIMER_IRQ_PRIORITY    SERVO_TIMER_IRQ_PRIORITY_DEFAULT
+  #endif
+#endif
+
+#if ENABLED(SPEAKER)
+  // The MFL framework default timer priority is 12. The TEMP timer must have lower priority
+  // than this due to the long running temperature ISR, and STEP timer should higher priority.
+  #if !(TIMER_IRQ_PRIORITY > STEP_TIMER_IRQ_PRIORITY && TIMER_IRQ_PRIORITY < TEMP_TIMER_IRQ_PRIORITY)
+    #error "Default timer interrupt priority is unspecified or set to a value which may degrade performance."
+  #endif
+#endif
+
+#ifndef HAL_TIMER_RATE
+  #define HAL_TIMER_RATE  GetStepperTimerClkFreq()
+#endif
+
+#ifndef STEP_TIMER
+  #define STEP_TIMER    MF_TIMER_STEP
+#endif
+#ifndef TEMP_TIMER
+  #define TEMP_TIMER    MF_TIMER_TEMP
+#endif
+
+GeneralTimer& Step_Timer = GeneralTimer::get_instance(static_cast<timer::TIMER_Base>(STEP_TIMER));
+GeneralTimer& Temp_Timer = GeneralTimer::get_instance(static_cast<timer::TIMER_Base>(TEMP_TIMER));
+
+bool is_step_timer_initialized = false;
+bool is_temp_timer_initialized = false;
+
+// ------------------------
+// Public functions
+// ------------------------
+
+// Retrieves the clock frequency of the stepper timer
+uint32_t GetStepperTimerClkFreq() {
+  return Step_Timer.getTimerClockFrequency();
+}
+
+/**
+ * @brief Starts a hardware timer
+ *
+ * If the timer is not already initialized, this function will initialize it with the given frequency.
+ * The timer is started immediately after initialization
+ *
+ * @param timer The timer base index to start
+ * @param frequency The frequency at which the timer should run
+ * @return None
+ */
+void HAL_timer_start(const uint8_t timer_number, const uint32_t frequency) {
+  if (HAL_timer_initialized(timer_number) || (timer_number != MF_TIMER_STEP && timer_number != MF_TIMER_TEMP))
+    return;
+
+  const bool is_step = (timer_number == MF_TIMER_STEP);
+  const uint8_t priority = is_step ?
+                           static_cast<uint8_t>(STEP_TIMER_IRQ_PRIORITY) :
+                           static_cast<uint8_t>(TEMP_TIMER_IRQ_PRIORITY);
+
+  // Get the reference of the timer instance
+  GeneralTimer& timer = is_step ? Step_Timer : Temp_Timer;
+
+  if (is_step) {
+    timer.setPrescaler(STEPPER_TIMER_PRESCALE);
+    timer.setRolloverValue(_MIN(static_cast<hal_timer_t>(HAL_TIMER_TYPE_MAX),
+                               (HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)),
+                               TimerFormat::TICK);
+    is_step_timer_initialized = true;
+  }
+  else {
+    timer.setRolloverValue(frequency, TimerFormat::HERTZ);
+    is_temp_timer_initialized = true;
+  }
+
+  timer.setAutoReloadEnable(false);
+  timer.setInterruptPriority(priority, 0U);
+  HAL_timer_enable_interrupt(timer_number);
+  timer.start();
+}
+
+/**
+ * @brief Enables the interrupt for the specified timer
+ *
+ * @param handle The timer handle for which to enable the interrupt
+ * @return None
+ */
+void HAL_timer_enable_interrupt(const uint8_t timer_number) {
+  if (!HAL_timer_initialized(timer_number)) return;
+
+  GeneralTimer& timer = (timer_number == MF_TIMER_STEP) ? Step_Timer : Temp_Timer;
+
+  if (timer_number == MF_TIMER_STEP && !timer.hasInterrupt())
+    timer.attachInterrupt(Step_Handler);
+  else if (timer_number == MF_TIMER_TEMP && !timer.hasInterrupt())
+    timer.attachInterrupt(Temp_Handler);
+}
+
+/**
+ * @brief Disables the interrupt for the specified timer
+ *
+ * @param handle The timer handle for which to disable the interrupt
+ * @return None
+ */
+void HAL_timer_disable_interrupt(const uint8_t timer_number) {
+  if (!HAL_timer_initialized(timer_number)) return;
+
+  GeneralTimer& timer = (timer_number == MF_TIMER_STEP) ? Step_Timer : Temp_Timer;
+  if (timer_number == MF_TIMER_STEP || timer_number == MF_TIMER_TEMP)
+    timer.detachInterrupt();
+}
+
+/**
+ * @brief Checks if the interrupt is enabled for the specified timer
+ *
+ * @param handle The timer handle to check
+ * @return True if the interrupt is enabled, false otherwise
+ */
+bool HAL_timer_interrupt_enabled(const uint8_t timer_number) {
+  if (!HAL_timer_initialized(timer_number)) return false;
+
+  GeneralTimer& timer = (timer_number == MF_TIMER_STEP) ? Step_Timer : Temp_Timer;
+  return (timer_number == MF_TIMER_STEP || timer_number == MF_TIMER_TEMP)
+         ? timer.hasInterrupt()
+         : false;
+}
+
+// Sets the interrupt priorities for timers used by TMC SW serial and servos.
+void SetTimerInterruptPriorities() {
+  TERN_(HAS_TMC_SW_SERIAL, SoftwareSerial::setInterruptPriority(SWSERIAL_TIMER_IRQ_PRIORITY, 0));
+  TERN_(HAS_SERVOS, libServo::setInterruptPriority(SERVO_TIMER_IRQ_PRIORITY, 0));
+}
+
+// ------------------------
+// Detect timer conflicts
+// ------------------------
+
+TERN_(SPEAKER, static constexpr timer::TIMER_Base timer_tone[] = {static_cast<timer::TIMER_Base>(TIMER_TONE)});
+TERN_(HAS_SERVOS, static constexpr timer::TIMER_Base timer_servo[] = {static_cast<timer::TIMER_Base>(TIMER_SERVO)});
+
+enum TimerPurpose {
+  PURPOSE_TONE,
+  PURPOSE_SERVO,
+  PURPOSE_STEP,
+  PURPOSE_TEMP
+};
+
+// List of timers to check for conflicts
+// Includes the timer purpose to ease debugging when evaluating at build-time
+// This cannot yet account for timers used for PWM output, such as for fans
+static constexpr struct { TimerPurpose p; int t; } timers_in_use[] = {
+  #if ENABLED(SPEAKER)
+    { PURPOSE_TONE, timer_base_to_index(timer_tone[0]) },     // Set in variant.h
+  #endif
+  #if HAS_SERVOS
+    { PURPOSE_SERVO, timer_base_to_index(timer_servo[0]) },   // Set in variant.h
+  #endif
+  { PURPOSE_STEP, MF_TIMER_STEP },
+  { PURPOSE_TEMP, MF_TIMER_TEMP },
+};
+
+// Verifies if there are any timer conflicts in the timers_in_use array
+static constexpr bool verify_no_timer_conflicts() {
+  for (uint8_t i = 0; i < COUNT(timers_in_use); i++)
+    for (uint8_t j = i + 1; j < COUNT(timers_in_use); j++)
+      if (timers_in_use[i].t == timers_in_use[j].t)
+        return false;
+
+  return true;
+}
+
+// If this assertion fails at compile time, review the timers_in_use array.
+// If default_envs is defined properly in platformio.ini, VSCode can evaluate the array
+// when hovering over it, making it easy to identify the conflicting timers
+static_assert(verify_no_timer_conflicts(), "One or more timer conflict detected. Examine \"timers_in_use\" to help identify conflict.");
+
+#endif // ARDUINO_ARCH_MFL

Marlin/src/HAL/GD32_MFL/timers.h

@@ -0,0 +1,145 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+#include "../../inc/MarlinConfig.h"
+
+#include <GeneralTimer.h>
+
+// ------------------------
+// Defines
+// ------------------------
+
+// Timer configuration constants
+#define STEPPER_TIMER_RATE    2000000
+#define TEMP_TIMER_FREQUENCY  1000
+
+// Timer instance definitions
+#define MF_TIMER_STEP     3
+#define MF_TIMER_TEMP     1
+#define MF_TIMER_PULSE    MF_TIMER_STEP
+
+#define hal_timer_t         uint32_t
+#define HAL_TIMER_TYPE_MAX  UINT16_MAX
+
+extern uint32_t GetStepperTimerClkFreq();
+
+// Timer prescaler calculations
+#define STEPPER_TIMER_PRESCALE      (GetStepperTimerClkFreq() / STEPPER_TIMER_RATE)	// Prescaler = 30
+#define PULSE_TIMER_PRESCALE        STEPPER_TIMER_PRESCALE
+#define STEPPER_TIMER_TICKS_PER_US  ((STEPPER_TIMER_RATE) / 1000000)				        // Stepper timer ticks per µs
+#define PULSE_TIMER_RATE            STEPPER_TIMER_RATE
+#define PULSE_TIMER_TICKS_PER_US    STEPPER_TIMER_TICKS_PER_US
+
+// Timer interrupt priorities
+#define STEP_TIMER_IRQ_PRIORITY 2
+#define TEMP_TIMER_IRQ_PRIORITY 14
+
+#define ENABLE_STEPPER_DRIVER_INTERRUPT()   HAL_timer_enable_interrupt(MF_TIMER_STEP)
+#define DISABLE_STEPPER_DRIVER_INTERRUPT()  HAL_timer_disable_interrupt(MF_TIMER_STEP)
+#define STEPPER_ISR_ENABLED()               HAL_timer_interrupt_enabled(MF_TIMER_STEP)
+#define ENABLE_TEMPERATURE_INTERRUPT()		  HAL_timer_enable_interrupt(MF_TIMER_TEMP)
+#define DISABLE_TEMPERATURE_INTERRUPT()     HAL_timer_disable_interrupt(MF_TIMER_TEMP)
+
+extern void Step_Handler();
+extern void Temp_Handler();
+
+#ifndef HAL_STEP_TIMER_ISR
+  #define HAL_STEP_TIMER_ISR() void Step_Handler()
+#endif
+#ifndef HAL_TEMP_TIMER_ISR
+  #define HAL_TEMP_TIMER_ISR() void Temp_Handler()
+#endif
+
+extern GeneralTimer& Step_Timer;
+extern GeneralTimer& Temp_Timer;
+
+extern bool is_step_timer_initialized;
+extern bool is_temp_timer_initialized;
+
+// Build-time mapping between timer base and index. Used in timers.cpp and fast_pwm.cpp
+static inline constexpr struct {timer::TIMER_Base base; uint8_t timer_number;} base_to_index[] = {
+  { timer::TIMER_Base::TIMER0_BASE, 0 },
+  { timer::TIMER_Base::TIMER1_BASE, 1 },
+  { timer::TIMER_Base::TIMER2_BASE, 2 },
+  { timer::TIMER_Base::TIMER3_BASE, 3 },
+  { timer::TIMER_Base::TIMER4_BASE, 4 },
+  { timer::TIMER_Base::TIMER5_BASE, 5 },
+  { timer::TIMER_Base::TIMER6_BASE, 6 },
+  { timer::TIMER_Base::TIMER7_BASE, 7 }
+};
+
+// Converts a timer base to an integer timer index.
+constexpr int timer_base_to_index(timer::TIMER_Base base) {
+  for (const auto& timer : base_to_index) {
+    if (timer.base == base) {
+      return static_cast<int>(timer.timer_number);
+    }
+  }
+  return -1;
+}
+
+// ------------------------
+// Public functions
+// ------------------------
+
+void HAL_timer_start(const uint8_t timer, const uint32_t frequency);
+void HAL_timer_enable_interrupt(const uint8_t timer);
+void HAL_timer_disable_interrupt(const uint8_t timer);
+bool HAL_timer_interrupt_enabled(const uint8_t timer);
+
+// Configure timer priorities for peripherals such as Software Serial or Servos.
+// Exposed here to allow all timer priority information to reside in timers.cpp
+void SetTimerInterruptPriorities();
+
+// FORCE_INLINE because these are used in performance-critical situations
+FORCE_INLINE bool HAL_timer_initialized(const uint8_t timer_number) {
+  return (timer_number == MF_TIMER_STEP) ? is_step_timer_initialized :
+         (timer_number == MF_TIMER_TEMP) ? is_temp_timer_initialized :
+         false;
+}
+
+FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_number) {
+  if (!HAL_timer_initialized(timer_number)) return 0U;
+
+  GeneralTimer& timer = (timer_number == MF_TIMER_STEP) ? Step_Timer : Temp_Timer;
+
+  return (timer_number == MF_TIMER_STEP || timer_number == MF_TIMER_TEMP)
+         ? timer.getCounter(TimerFormat::TICK)
+         : 0U;
+}
+
+FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_number, const hal_timer_t value) {
+  if (!HAL_timer_initialized(timer_number)) return;
+
+  const uint32_t new_value = static_cast<uint32_t>(value + 1U);
+  GeneralTimer& timer = (timer_number == MF_TIMER_STEP) ? Step_Timer : Temp_Timer;
+
+  if (timer_number == MF_TIMER_STEP || timer_number == MF_TIMER_TEMP) {
+    timer.setRolloverValue(new_value, TimerFormat::TICK);
+    if (value < static_cast<hal_timer_t>(timer.getCounter(TimerFormat::TICK)))
+      timer.refresh();
+  }
+}
+
+#define HAL_timer_isr_prologue(T) NOOP
+#define HAL_timer_isr_epilogue(T) NOOP

Marlin/src/HAL/GD32_MFL/u8g/LCD_defines.h

@@ -0,0 +1,26 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2025 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+// MFL LCD-specific defines
+uint8_t u8g_com_HAL_MFL_sw_spi_fn(u8g_t* u8g, uint8_t msg, uint8_t arg_val, void* arg_ptr); // u8g_com_mfl_swspi.cpp
+#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_MFL_sw_spi_fn

Marlin/src/HAL/HAL.h

@@ -27,7 +27,7 @@
   #define GCC_VERSION (__GNUC__ * 10000 + __GNUC_MINOR__ * 100 + __GNUC_PATCHLEVEL__)
 #endif
 
-#include HAL_PATH(..,HAL.h)
+#include HAL_PATH(.., HAL.h)
 extern MarlinHAL hal;
 
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)

Marlin/src/HAL/HC32/HAL.h

@@ -30,69 +30,18 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#include "../../core/macros.h"
 #include "../shared/Marduino.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 
 #include "fastio.h"
 #include "timers.h"
-#include "MarlinSerial.h"
-
-#include <stdint.h>
 
 //
 // Serial Ports
 //
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-#define NUM_UARTS 4
 
-#if SERIAL_PORT == -1
+#include "MarlinSerial.h"
-  #error "USB Serial is not supported on HC32F460"
-#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #define MYSERIAL1 MSERIAL(1) // Dummy port
-  static_assert(false, "SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #define MYSERIAL2 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_2 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(SERIAL_PORT_3, 1, NUM_UARTS)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #define MYSERIAL3 MSERIAL(1) // Dummy port
-    static_assert(false, "SERIAL_PORT_3 must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #error "USB Serial is not supported on HC32F460"
-  #elif WITHIN(LCD_SERIAL_PORT, 1, NUM_UARTS)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #define LCD_SERIAL MSERIAL(1) // Dummy port
-    static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
-  #endif
-
-  #if HAS_DGUS_LCD
-    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
-  #endif
-#endif
 
 //
 // Emergency Parser

Marlin/src/HAL/HC32/MarlinSerial.h

@@ -24,6 +24,14 @@
 #include "../../core/serial_hook.h"
 #include <drivers/usart/Usart.h>
 
+#define SERIAL_INDEX_MIN 1
+#define SERIAL_INDEX_MAX 4
+#include "../shared/serial_ports.h"
+
+#if defined(LCD_SERIAL_PORT) && ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
+  #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
+#endif
+
 // Optionally set uart IRQ priority to reduce overflow errors
 //#define UART_RX_IRQ_PRIO 1
 //#define UART_TX_IRQ_PRIO 1

Marlin/src/HAL/HC32/README.md

@@ -11,7 +11,7 @@ The HC32F460 HAL is designed to be generic enough for any HC32F460-based board.
    - Examine the board's main processor. (Refer the naming key in `hc32.ini`.)
    - Extend the `HC32F460C_common` base env for 256K, or `HC32F460E_common` for 512K.
 3. Determine your board's application start address (see [below](#finding-the-application-start-address))
-4. Set `board_build.ld_args.flash_start` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.
+4. Set `board_upload.offset_address` to the app start address once you've found it. If your board doesn't use a bootloader, you may be able to use the "ICSP" header or DFU. This document will be updated once we have more information about flashing without a bootloader.
 
 ### Finding the application start address
 

Marlin/src/HAL/HC32/app_config.h

@@ -8,6 +8,7 @@
 #define _HC32_APP_CONFIG_H_
 
 #include "../../inc/MarlinConfigPre.h"
+#include "sysclock.h"
 
 //
 // dev mode
@@ -64,12 +65,8 @@
 // redirect printf to host serial
 #define REDIRECT_PRINTF_TO_SERIAL 1
 
-// F_CPU must be known at compile time, but on HC32F460 it's not.
+// F_CPU is F_HCLK, as that's the main CPU core's clock.
-// Thus we assume HCLK to be 200MHz, as that's what is configured in
+// see 'sysclock.h' for more information.
-// 'core_hook_sysclock_init' in 'sysclock.cpp'.
+#define F_CPU F_HCLK
-// If you face issues with this assumption, please double-check with the values
-// printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
-// see also: HAL_TIMER_RATE in timers.h
-#define F_CPU 200000000 // 200MHz HCLK
 
 #endif // _HC32_APP_CONFIG_H_

Marlin/src/HAL/HC32/eeprom/eeprom_bl24cxx.cpp

@@ -26,12 +26,12 @@
  */
 #ifdef ARDUINO_ARCH_HC32
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(IIC_BL24CXX_EEPROM)
 
-#include "../shared/eeprom_api.h"
+#include "../../shared/eeprom_api.h"
-#include "../shared/eeprom_if.h"
+#include "../../shared/eeprom_if.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."

Marlin/src/HAL/HC32/eeprom/eeprom_if_iic.cpp

@@ -26,12 +26,12 @@
  */
 #ifdef ARDUINO_ARCH_HC32
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(IIC_BL24CXX_EEPROM)
 
-#include "../../libs/BL24CXX.h"
+#include "../../../libs/BL24CXX.h"
-#include "../shared/eeprom_if.h"
+#include "../../shared/eeprom_if.h"
 
 void eeprom_init() {
   BL24CXX::init();

Marlin/src/HAL/HC32/eeprom/eeprom_sdcard.cpp

@@ -25,12 +25,12 @@
  */
 #ifdef ARDUINO_ARCH_HC32
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if ENABLED(SDCARD_EEPROM_EMULATION)
 
-#include "../shared/eeprom_api.h"
+#include "../../shared/eeprom_api.h"
-#include "../../sd/cardreader.h"
+#include "../../../sd/cardreader.h"
 
 #define EEPROM_FILENAME "eeprom.dat"
 

Marlin/src/HAL/HC32/eeprom/eeprom_wired.cpp

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -18,7 +21,7 @@
  */
 #ifdef ARDUINO_ARCH_HC32
 
-#include "../../inc/MarlinConfig.h"
+#include "../../../inc/MarlinConfig.h"
 
 #if USE_WIRED_EEPROM
 
@@ -29,8 +32,8 @@
  * with simple implementations supplied by Marlin.
  */
 
-#include "../shared/eeprom_if.h"
+#include "../../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
+#include "../../shared/eeprom_api.h"
 
 #ifndef MARLIN_EEPROM_SIZE
   #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."

Marlin/src/HAL/HC32/pinsDebug.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or
@@ -18,41 +21,47 @@
  */
 #pragma once
 
+/**
+ * Pins Debugging for HC32
+ *
+ *   - NUMBER_PINS_TOTAL
+ *   - MULTI_NAME_PAD
+ *   - getPinByIndex(index)
+ *   - printPinNameByIndex(index)
+ *   - getPinIsDigitalByIndex(index)
+ *   - digitalPinToAnalogIndex(pin)
+ *   - getValidPinMode(pin)
+ *   - isValidPin(pin)
+ *   - isAnalogPin(pin)
+ *   - digitalRead_mod(pin)
+ *   - pwm_status(pin)
+ *   - printPinPWM(pin)
+ *   - printPinPort(pin)
+ *   - printPinNumber(pin)
+ *   - printPinAnalog(pin)
+ */
+
 #include "../../inc/MarlinConfig.h"
 #include "fastio.h"
 #include <drivers/timera/timera_pwm.h>
 
-//
-// Translation of routines & variables used by pinsDebug.h
-//
 #ifndef BOARD_NR_GPIO_PINS
   #error "Expected BOARD_NR_GPIO_PINS not found."
 #endif
 
 #define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
 #define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define isValidPin(pin) IS_GPIO_PIN(pin)
+#define isValidPin(P) IS_GPIO_PIN(P)
 
 // Note: pin_array is defined in `Marlin/src/pins/pinsDebug.h`, and since this file is included
 // after it, it is available in this file as well.
-#define getPinByIndex(p) pin_t(pin_array[p].pin)
+#define getPinByIndex(x) pin_t(pin_array[x].pin)
-#define digitalRead_mod(p) extDigitalRead(p)
+#define digitalRead_mod(P) extDigitalRead(P)
-#define printPinNumber(p)                              \
+
-  do {                                            \
+#define printPinNumber(P) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(P)); SERIAL_ECHO(buffer); }while(0)
-    sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); \
+#define printPinAnalog(P) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(P)); SERIAL_ECHO(buffer); }while(0)
-    SERIAL_ECHO(buffer);                          \
+
-  } while (0)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define printPinAnalog(p)                                               \
-  do {                                                                    \
-    sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); \
-    SERIAL_ECHO(buffer);                                                  \
-  } while (0)
-#define PRINT_PORT(p) printPinPort(p)
-#define printPinNameByIndex(x)                                                          \
-  do {                                                                               \
-    sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); \
-    SERIAL_ECHO(buffer);                                                             \
-  } while (0)
 
 #define MULTI_NAME_PAD 21 // Space needed to be pretty if not first name assigned to a pin
 
@@ -71,13 +80,13 @@
   #define M43_NEVER_TOUCH(Q) (IS_HOST_USART_PIN(Q) || IS_OSC_PIN(Q))
 #endif
 
-static int8_t digitalPinToAnalogIndex(pin_t pin) {
+int8_t digitalPinToAnalogIndex(const pin_t pin) {
   if (!isValidPin(pin)) return -1;
   const int8_t adc_channel = int8_t(PIN_MAP[pin].adc_info.channel);
   return pin_t(adc_channel);
 }
 
-static bool isAnalogPin(pin_t pin) {
+bool isAnalogPin(pin_t pin) {
   if (!isValidPin(pin)) return false;
 
   if (PIN_MAP[pin].adc_info.channel != ADC_PIN_INVALID)
@@ -86,12 +95,12 @@ static bool isAnalogPin(pin_t pin) {
   return false;
 }
 
-static bool getValidPinMode(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
   return isValidPin(pin) && !IS_INPUT(pin);
 }
 
-static bool getPinIsDigitalByIndex(const int16_t array_pin) {
+bool getPinIsDigitalByIndex(const int16_t index) {
-  const pin_t pin = getPinByIndex(array_pin);
+  const pin_t pin = getPinByIndex(index);
   return (!isAnalogPin(pin));
 }
 

Marlin/src/HAL/HC32/spi_pins.h

@@ -2,6 +2,9 @@
  * Marlin 3D Printer Firmware
  * Copyright (c) 2023 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
  *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
  * the Free Software Foundation, either version 3 of the License, or

Marlin/src/HAL/HC32/sysclock.cpp

@@ -26,64 +26,144 @@
 
 #ifdef ARDUINO_ARCH_HC32
 
-// Get BOARD_XTAL_FREQUENCY from configuration / pins
 #include "../../inc/MarlinConfig.h"
+#include "sysclock.h"
 
 #include <core_hooks.h>
 #include <drivers/sysclock/sysclock_util.h>
 
+/***
+ * @brief Automatically calculate M, N, P values for the MPLL to reach a target frequency.
+ * @param input_frequency The input frequency.
+ * @param target_frequency The target frequency.
+ * @return The MPLL configuration structure. Q and R are not set.
+ *
+ * @note
+ * Simplified MPLL block diagram, with intermediary clocks (1) = VCO_in, (2) = VCO_out:
+ *
+ *  INPUT -> [/ M] -(1)-> [* N] -(2)-|-> [/ P] -> MPLL-P
+ */
+constexpr stc_clk_mpll_cfg_t get_mpll_config(double input_frequency, double target_frequency) {
+  // PLL input clock divider: M in [1, 24]
+  for (uint32_t M = 1; M <= 24; M++) {
+    double f_vco_in = input_frequency / M;
+
+    // 1 <= VCO_in <= 25 MHz
+    if (f_vco_in < 1e6 || f_vco_in > 25e6) continue;
+
+    // VCO multiplier: N in [20, 480]
+    for (uint32_t N = 20; N <= 480; N++) {
+      double f_vco_out = f_vco_in * N;
+
+      // 240 <= VCO_out <= 480 MHz
+      if (f_vco_out < 240e6 || f_vco_out > 480e6) continue;
+
+      // Output "P" divider: P in [2, 16]
+      for (uint32_t P = 2; P <= 16; P++) {
+        double f_calculated_out = f_vco_out / P;
+        if (f_calculated_out == target_frequency) {
+          // Found a match, return it
+          return {
+            .PllpDiv = P,
+            .PllqDiv = P, // Don't care for Q and R
+            .PllrDiv = P, // "
+            .plln =    N,
+            .pllmDiv = M
+          };
+        }
+      }
+    }
+  }
+
+  // If no valid M, N, P found, return invalid config
+  return { 0, 0, 0, 0, 0 };
+}
+
+/**
+ * @brief Get the division factor required to get the target frequency from the input frequency.
+ * @tparam input_freq The input frequency.
+ * @tparam target_freq The target frequency.
+ * @return The division factor.
+ */
+template <uint32_t input_freq, uint32_t target_freq>
+constexpr en_clk_sysclk_div_factor_t get_division_factor() {
+  // Calculate the divider to get the target frequency
+  constexpr float fdivider = static_cast<float>(input_freq) / static_cast<float>(target_freq);
+  constexpr int divider = static_cast<int>(fdivider);
+
+  // divider must be an integer
+  static_assert(fdivider == divider, "Target frequency not achievable, divider must be an integer");
+
+  // divider must be between 1 and 64 (enum range), and must be a power of 2
+  static_assert(divider >= 1 && divider <= 64, "Invalid divider, out of range");
+  static_assert((divider & (divider - 1)) == 0, "Invalid divider, not a power of 2");
+
+  // return the divider
+  switch (divider) {
+    case 1:  return ClkSysclkDiv1;
+    case 2:  return ClkSysclkDiv2;
+    case 4:  return ClkSysclkDiv4;
+    case 8:  return ClkSysclkDiv8;
+    case 16: return ClkSysclkDiv16;
+    case 32: return ClkSysclkDiv32;
+    case 64: return ClkSysclkDiv64;
+  }
+}
+
+/**
+ * @brief Validate the runtime clocks match the expected values.
+ */
+void validate_system_clocks() {
+  #define CLOCK_ASSERT(expected, actual)                  \
+    if (expected != actual) {                             \
+      SERIAL_ECHOPGM(                                     \
+        "Clock Mismatch for " #expected ": "              \
+        "expected ", expected,                            \
+        ", got ", actual                                  \
+        );                                                \
+      CORE_ASSERT_FAIL("Clock Mismatch: " #expected);     \
+    }
+
+  update_system_clock_frequencies();
+
+  CLOCK_ASSERT(F_SYSTEM_CLOCK, SYSTEM_CLOCK_FREQUENCIES.system);
+  CLOCK_ASSERT(F_HCLK, SYSTEM_CLOCK_FREQUENCIES.hclk);
+  CLOCK_ASSERT(F_EXCLK, SYSTEM_CLOCK_FREQUENCIES.exclk);
+  CLOCK_ASSERT(F_PCLK0, SYSTEM_CLOCK_FREQUENCIES.pclk0);
+  CLOCK_ASSERT(F_PCLK1, SYSTEM_CLOCK_FREQUENCIES.pclk1);
+  CLOCK_ASSERT(F_PCLK2, SYSTEM_CLOCK_FREQUENCIES.pclk2);
+  CLOCK_ASSERT(F_PCLK3, SYSTEM_CLOCK_FREQUENCIES.pclk3);
+  CLOCK_ASSERT(F_PCLK4, SYSTEM_CLOCK_FREQUENCIES.pclk4);
+}
+
+/**
+ * @brief Configure HC32 system clocks.
+ *
+ * This function is called by the Arduino core early in the startup process, before setup() is called.
+ * It is used to configure the system clocks to the desired state.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
 void core_hook_sysclock_init() {
   // Set wait cycles, as we are about to switch to 200 MHz HCLK
   sysclock_configure_flash_wait_cycles();
   sysclock_configure_sram_wait_cycles();
 
-  // Configure MPLLp to 200 MHz output, with different settings depending on XTAL availability
+  // Select MPLL input frequency based on clock availability
-  #if BOARD_XTAL_FREQUENCY == 8000000 // 8 MHz XTAL
+  #if BOARD_XTAL_FREQUENCY == 8000000 || BOARD_XTAL_FREQUENCY == 16000000 // 8 MHz or 16 MHz XTAL
-    // - M = 1   => 8 MHz / 1 = 8 MHz
+    constexpr uint32_t mpll_input_clock = BOARD_XTAL_FREQUENCY;
-    // - N = 50  => 8 MHz * 50 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
-    sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);
 
-  #elif BOARD_XTAL_FREQUENCY == 16000000 // 16 MHz XTAL
-    // - M = 1   => 16 MHz / 1 = 16 MHz
-    // - N = 50  => 16 MHz * 25 = 400 MHz
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 50u,   // N
-        .pllmDiv = 1u, // M
-    };
     sysclock_configure_xtal();
-    sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);
 
-  #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #if BOARD_XTAL_FREQUENCY == 16000000
+      #warning "HC32F460 with 16 MHz XTAL has not been tested."
+    #endif
 
   #else // HRC (16 MHz)
-    // - M = 1   => 16 MHz / 1 = 16 MHz
+
-    // - N = 25  => 16 MHz * 25 = 400 MHz
+    constexpr uint32_t mpll_input_clock = 16000000;
-    // - P = 2   => 400 MHz / 2 = 200 MHz (sysclk)
+
-    // - Q,R = 4 => 400 MHz / 4 = 100 MHz (dont care)
-    stc_clk_mpll_cfg_t pllConf = {
-        .PllpDiv = 2u, // P
-        .PllqDiv = 4u, // Q
-        .PllrDiv = 4u, // R
-        .plln = 25u,   // N
-        .pllmDiv = 1u, // M
-    };
     sysclock_configure_hrc();
-    sysclock_configure_mpll(ClkPllSrcHRC, &pllConf);
 
     // HRC could have been configured by ICG to 20 MHz
     // TODO: handle gracefully if HRC is not 16 MHz
@@ -91,29 +171,56 @@ void core_hook_sysclock_init() {
       panic("HRC is not 16 MHz");
     }
 
-    #ifdef BOARD_XTAL_FREQUENCY
+    #if defined(BOARD_XTAL_FREQUENCY)
       #warning "No valid XTAL frequency defined, falling back to HRC."
     #endif
+
   #endif
 
-  // sysclk is now configured according to F_CPU (i.e., 200MHz PLL output)
+  // Automagically calculate MPLL configuration
-  const uint32_t sysclock = F_CPU;
+  constexpr stc_clk_mpll_cfg_t pllConf = get_mpll_config(mpll_input_clock, F_SYSTEM_CLOCK);
+  static_assert(pllConf.pllmDiv != 0 && pllConf.plln != 0 && pllConf.PllpDiv != 0, "MPLL auto-configuration failed");
+  sysclock_configure_mpll(ClkPllSrcXTAL, &pllConf);
 
-  // Setup clock divisors for sysclk = 200 MHz
+  // Setup clock divisors
-  // Note: PCLK1 is used for step+temp timers, and need to be kept at 50 MHz (until there is a better solution)
   constexpr stc_clk_sysclk_cfg_t sysClkConf = {
-      .enHclkDiv = ClkSysclkDiv1,  // HCLK  = 200 MHz (CPU)
+    .enHclkDiv  = get_division_factor<F_SYSTEM_CLOCK, F_HCLK>(),
-      .enExclkDiv = ClkSysclkDiv2, // EXCLK = 100 MHz (SDIO)
+    .enExclkDiv = get_division_factor<F_SYSTEM_CLOCK, F_EXCLK>(),
-      .enPclk0Div = ClkSysclkDiv2, // PCLK0 = 100 MHz (Timer6 (not used))
+    .enPclk0Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK0>(),
-      .enPclk1Div = ClkSysclkDiv4, // PCLK1 = 50 MHz (USART, SPI, I2S, Timer0 (step+temp), TimerA (Servo))
+    .enPclk1Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK1>(),
-      .enPclk2Div = ClkSysclkDiv8, // PCLK2 = 25 MHz (ADC)
+    .enPclk2Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK2>(),
-      .enPclk3Div = ClkSysclkDiv8, // PCLK3 = 25 MHz (I2C, WDT)
+    .enPclk3Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK3>(),
-      .enPclk4Div = ClkSysclkDiv2, // PCLK4 = 100 MHz (ADC ctl)
+    .enPclk4Div = get_division_factor<F_SYSTEM_CLOCK, F_PCLK4>(),
   };
+  sysclock_set_clock_dividers(&sysClkConf);
 
+  // Set power mode, before switch
+  power_mode_update_pre(F_SYSTEM_CLOCK);
+
+  // Switch to MPLL-P as system clock source
+  CLK_SetSysClkSource(CLKSysSrcMPLL);
+
+  // Set power mode, after switch
+  power_mode_update_post(F_SYSTEM_CLOCK);
+
+  // Verify clocks match expected values (at runtime)
+  #if ENABLED(MARLIN_DEV_MODE) || ENABLED(ALWAYS_VALIDATE_CLOCKS)
+    validate_system_clocks();
+  #endif
+
+  // Verify clock configuration (at compile time)
   #if ARDUINO_CORE_VERSION_INT >= GET_VERSION_INT(1, 2, 0)
+    assert_mpll_config_valid<
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv,
+      pllConf.PllqDiv,
+      pllConf.PllrDiv
+    >();
+
     assert_system_clocks_valid<
-      sysclock,
+      F_SYSTEM_CLOCK,
       sysClkConf.enHclkDiv,
       sysClkConf.enPclk0Div,
       sysClkConf.enPclk1Div,
@@ -122,18 +229,14 @@ void core_hook_sysclock_init() {
       sysClkConf.enPclk4Div,
       sysClkConf.enExclkDiv
     >();
+
+    static_assert(get_mpll_output_clock(
+      mpll_input_clock,
+      pllConf.pllmDiv,
+      pllConf.plln,
+      pllConf.PllpDiv
+    ) == F_SYSTEM_CLOCK, "actual MPLL output clock does not match F_SYSTEM_CLOCK");
   #endif
-
-  sysclock_set_clock_dividers(&sysClkConf);
-
-  // Set power mode
-  power_mode_update_pre(sysclock);
-
-  // Switch to MPLL as sysclk source
-  CLK_SetSysClkSource(CLKSysSrcMPLL);
-
-  // Set power mode
-  power_mode_update_post(sysclock);
 }
 
 #endif // ARDUINO_ARCH_HC32

Marlin/src/HAL/HC32/sysclock.h

@@ -0,0 +1,65 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
+
+/**
+ * HC32F460 system clock configuration.
+ *
+ * With the HC32 HAL, the various peripheral clocks (including the CPU clock) are derived
+ * from the main PLL (MPLL-P) output (referred to at F_SYSTEM_CLOCK).
+ *
+ * F_SYSTEM_CLOCK is the target frequency of the main PLL, and the PLL is automatically configured
+ * to achieve this frequency.
+ *
+ * The peripheral clocks are the result of integer division of F_SYSTEM_CLOCK.
+ * Their target frequencies are defined here, and the required division factors are calculated automatically.
+ * Note that the division factor must be a power of 2 between 1 and 64.
+ * If the target frequency is not achievable, a compile-time error will be generated.
+ *
+ * Additionally, there are interdependencies between the peripheral clocks, which are described in
+ * Section 4.4 "Working Clock Specifications" of the HC32F460 Reference Manual.
+ * With Arduino core >= 1.2.0, these interdependencies are checked at compile time.
+ * On earlier versions, you are on your own.
+ *
+ * For all clock frequencies, they can be checked at runtime by enabling the 'ALWAYS_VALIDATE_CLOCKS' define.
+ * In MARLIN_DEV_MODE, they will also be printed to the serial console by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ *
+ * See https://github.com/MarlinFirmware/Marlin/pull/27099 for more information.
+ */
+
+// Target peripheral clock frequencies, must be integer divisors of F_SYSTEM_CLOCK.
+// Changing the frequency here will automagically update everything else.
+#define F_HCLK  200000000UL  // 200 MHz; CPU
+#define F_EXCLK (F_HCLK / 2) // 100 MHz; SDIO
+#define F_PCLK0 (F_HCLK / 2) // 100 MHz; Timer6 (unused)
+#define F_PCLK1 (F_HCLK / 4) //  50 MHz; USART, SPI, Timer0 (step + temp), TimerA (Servo)
+#define F_PCLK2 (F_HCLK / 8) //  25 MHz; ADC Sampling
+#define F_PCLK3 (F_HCLK / 8) //  25 MHz; I2C, WDT
+#define F_PCLK4 (F_HCLK / 2) // 100 MHz; ADC Control
+
+// MPLL-P clock target frequency. This must be >= the highest peripheral clock frequency.
+// PLL config is automatically calculated based on this value.
+#define F_SYSTEM_CLOCK F_HCLK
+
+// The Peripheral clocks are only checked at runtime if this is enabled OR MARLIN_DEV_MODE is enabled.
+// Compile time checks are always performed with Arduino core version >= 1.2.0.
+#define ALWAYS_VALIDATE_CLOCKS 1