jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity
Files
e249e380fc886dc59bf127b0294aed0ded5f3b01
Marlin/Marlin/src/lcd/extensible_ui/lib/Creality_DWIN.cpp
T
InsanityAutomation e249e380fc usability tweaks
2019-08-20 18:12:01 -04:00

1935 lines
55 KiB
C++
Raw Blame History

#include "Creality_DWIN.h"
#include <HardwareSerial.h>
#include <arduino.h>
#include <wstring.h>
#include <stdio.h>
#include "../ui_api.h"
namespace ExtUI
{
uint8_t waitway_lock = 0;
const float manual_feedrate_mm_m[] = MANUAL_FEEDRATE;
uint8_t progress_bar_percent;
int startprogress = 0;
CRec CardRecbuf;
int temphot = 0;
//int tempbed=0;
//float pause_z = 0;
#if DISABLED(POWER_LOSS_RECOVERY)
int power_off_type_yes = 0;
int power_off_commands_count = 0;
#endif
int last_target_temperature_bed;
int last_target_temperature[4] = {0};
char waitway = 0;
int recnum = 0;
unsigned char Percentrecord = 0;
float ChangeMaterialbuf[2] = {0};
char NozzleTempStatus[3] = {0};
bool PrintMode = false; //Eco Mode default off
char PrintStatue[2] = {0}; //PrintStatue[0], 0 represent to 43 page, 1 represent to 44 page
bool CardUpdate = false; //represents to update file list
char CardCheckStatus[2] = {0}; //CardCheckStatus[0] represents to check card in printing and after making sure to begin and to check card in heating with value as 1, but 0 for off
char PrinterStatusKey[2] = {0}; // PrinterStatusKey[1] value: 0 represents to keep temperature, 1 represents to heating , 2 stands for cooling , 3 stands for printing
// PrinterStatusKey[0] value: 0 reprensents 3D printer ready
bool lcd_sd_status; //represents SD-card status, true means SD is available, false means opposite.
char FilenamesCount = 0;
char cmdbuf[20] = {0};
char FilementStatus[2] = {0};
unsigned char AxisPagenum = 0; //0 for 10mm, 1 for 1mm, 2 for 0.1mm
bool InforShowStatus = true;
bool TPShowStatus = false; // true for only opening time and percentage, false for closing time and percentage.
bool FanStatus = true;
bool AutohomeKey = false;
unsigned char AutoHomeIconNum;
unsigned long VolumeSet = 0x80;
extern char power_off_commands[9][96];
bool PoweroffContinue = false;
char commandbuf[30];
void onStartup()
{
Serial2.begin(115200);
rtscheck.recdat.head[0] = rtscheck.snddat.head[0] = FHONE;
rtscheck.recdat.head[1] = rtscheck.snddat.head[1] = FHTWO;
memset(rtscheck.databuf, 0, sizeof(rtscheck.databuf));
//VolumeSet = eeprom_read_byte((unsigned char*)FONT_EEPROM+4);
//if(VolumeSet < 0 || VolumeSet > 0xFF)
VolumeSet = 0x20;
//Set Eco Mode
if (PrintMode)
rtscheck.RTS_SndData(3, FanKeyIcon + 1); // saving mode
else
rtscheck.RTS_SndData(2, FanKeyIcon + 1); // normal
last_target_temperature_bed = getTargetTemp_celsius(BED);
last_target_temperature[0] = getTargetTemp_celsius(H0);
rtscheck.RTS_SndData(100, FeedrateDisplay);
/***************turn off motor*****************/
rtscheck.RTS_SndData(11, FilenameIcon);
/***************transmit temperature to screen*****************/
rtscheck.RTS_SndData(0, NozzlePreheat);
rtscheck.RTS_SndData(0, BedPreheat);
rtscheck.RTS_SndData(getActualTemp_celsius(H0), NozzleTemp);
rtscheck.RTS_SndData(getActualTemp_celsius(BED), Bedtemp);
/***************transmit Fan speed to screen*****************/
rtscheck.RTS_SndData(2, FanKeyIcon); //turn 0ff fan icon
FanStatus = true;
/***************transmit Printer information to screen*****************/
for (int j = 0; j < 20; j++) //clean filename
rtscheck.RTS_SndData(0, MacVersion + j);
char sizebuf[20] = {0};
sprintf(sizebuf, "%d X %d X %d", Y_BED_SIZE, X_BED_SIZE, Z_MAX_POS);
rtscheck.RTS_SndData(CUSTOM_MACHINE_NAME, MacVersion);
rtscheck.RTS_SndData(DETAILED_BUILD_VERSION, SoftVersion);
rtscheck.RTS_SndData(sizebuf, PrinterSize);
rtscheck.RTS_SndData(WEBSITE_URL, CorpWebsite);
/**************************some info init*******************************/
rtscheck.RTS_SndData(0, PrintscheduleIcon);
rtscheck.RTS_SndData(0, PrintscheduleIcon + 1);
/************************clean screen*******************************/
for (int i = 0; i < MaxFileNumber; i++)
{
for (int j = 0; j < 10; j++)
rtscheck.RTS_SndData(0, SDFILE_ADDR + i * 10 + j);
}
for (int j = 0; j < 10; j++)
{
rtscheck.RTS_SndData(0, Printfilename + j); //clean screen.
rtscheck.RTS_SndData(0, Choosefilename + j); //clean filename
}
for (int j = 0; j < 8; j++)
rtscheck.RTS_SndData(0, FilenameCount + j);
for (int j = 1; j <= MaxFileNumber; j++)
{
rtscheck.RTS_SndData(10, FilenameIcon + j);
rtscheck.RTS_SndData(10, FilenameIcon1 + j);
}
SERIAL_ECHOLN("==Dwin Init Complete==");
}
void onIdle()
{
if(waitway && !commandsInQueue())
waitway_lock++;
else
waitway_lock = 0;
if(waitway_lock > 100) {
waitway_lock = 0;
waitway = 0; //clear waitway if nothing is going on
}
switch (waitway)
{
case 1:
if(isPositionKnown()) {
InforShowStatus = true;
SERIAL_ECHOLN("==waitway 1==");
rtscheck.RTS_SndData(4 + CEIconGrap, IconPrintstatus); // 4 for Pause
rtscheck.RTS_SndData(ExchangePageBase + 54, ExchangepageAddr);
waitway = 0;
}
break;
case 2:
if (isPositionKnown() && !commandsInQueue())
waitway = 0;
break;
case 3:
SERIAL_ECHOLN("==waitway 3==");
//if(isPositionKnown() && (getActualTemp_celsius(BED) >= (getTargetTemp_celsius(BED)-1))) {
rtscheck.RTS_SndData(ExchangePageBase + 64, ExchangepageAddr);
waitway = 0;
//}
break;
case 4:
if (AutohomeKey && isPositionKnown() && !commandsInQueue())
{ //Manual Move Home Done
SERIAL_ECHOLN("==waitway 4==");
rtscheck.RTS_SndData(ExchangePageBase + 71 + AxisPagenum, ExchangepageAddr);
AutohomeKey = false;
waitway = 0;
}
break;
case 5:
if(isPositionKnown() && !commandsInQueue()) {
InforShowStatus = true;
waitway = 0;
SERIAL_ECHOLN("==waitway 5==");
rtscheck.RTS_SndData(ExchangePageBase + 78, ExchangepageAddr); //exchange to 78 page
}
break;
}
#if ENABLED(POWER_LOSS_RECOVERY)
if (PoweroffContinue)
{
PoweroffContinue = false;
injectCommands_P(power_off_commands[3]);
card.startFileprint();
print_job_timer.power_off_start();
}
#endif
if (InforShowStatus)
{
if(power_off_type_yes ==0)
{
if (startprogress == 0)
{
rtscheck.RTS_SndData(StartSoundSet, SoundAddr);
if (VolumeSet == 0)
{
rtscheck.RTS_SndData(0, VolumeIcon);
rtscheck.RTS_SndData(9, SoundIcon);
}
else
{
rtscheck.RTS_SndData((VolumeSet + 1) / 32 - 1, VolumeIcon);
rtscheck.RTS_SndData(8, SoundIcon);
}
rtscheck.RTS_SndData(VolumeSet, VolumeIcon - 2);
rtscheck.RTS_SndData(VolumeSet << 8, SoundAddr + 1);
}
if (startprogress <= 100)
rtscheck.RTS_SndData(startprogress, StartIcon);
else
rtscheck.RTS_SndData((startprogress - 100), StartIcon + 1);
if ((startprogress += 1) > 200)
{
#if ENABLED(POWER_LOSS_RECOVERY)
if(lcd_sd_status && (power_off_commands_count > 0)) {
for (uint16_t i = 0; i < CardRecbuf.Filesum; i++)
{
if (!strcmp(CardRecbuf.Cardfilename[i], &power_off_info.sd_filename[1]))
{
InforShowStatus = true;
int filelen = strlen(CardRecbuf.Cardshowfilename[i]);
filelen = (TEXTBYTELEN - filelen) / 2;
if (filelen > 0)
{
char buf[20];
memset(buf, 0, sizeof(buf));
strncpy(buf, " ", filelen);
strcpy(&buf[filelen], CardRecbuf.Cardshowfilename[i]);
RTS_SndData(buf, Printfilename);
}
else
RTS_SndData(CardRecbuf.Cardshowfilename[i], Printfilename); //filenames
RTS_SndData(ExchangePageBase + 76, ExchangepageAddr);
break;
}
}
}
return;
#endif
SERIAL_ECHOLN(" startprogress ");
power_off_type_yes = 1;
InforShowStatus = true;
TPShowStatus = false;
rtscheck.RTS_SndData(ExchangePageBase + 45, ExchangepageAddr);
}
return;
}
if (TPShowStatus && isPrinting()) //need to optimize
{
rtscheck.RTS_SndData(0 + CEIconGrap, IconPrintstatus);
rtscheck.RTS_SndData(getProgress_seconds_elapsed() / 3600, Timehour);
rtscheck.RTS_SndData((getProgress_seconds_elapsed() % 3600) / 60, Timemin);
if (getProgress_percent() > 0)
{
Percentrecord = getProgress_percent() + 1;
if (Percentrecord <= 50)
{
rtscheck.RTS_SndData((unsigned int)Percentrecord * 2, PrintscheduleIcon);
rtscheck.RTS_SndData(0, PrintscheduleIcon + 1);
}
else
{
rtscheck.RTS_SndData(100, PrintscheduleIcon);
rtscheck.RTS_SndData((unsigned int)Percentrecord * 2 - 100, PrintscheduleIcon + 1);
}
}
else
{
rtscheck.RTS_SndData(0, PrintscheduleIcon);
rtscheck.RTS_SndData(0, PrintscheduleIcon + 1);
}
rtscheck.RTS_SndData((unsigned int)getProgress_percent(), Percentage);
}
else if (getActualTemp_celsius(BED) < (getTargetTemp_celsius(BED) - THERMAL_PROTECTION_BED_HYSTERESIS ) || (getActualTemp_celsius(H0) < (getTargetTemp_celsius(H0) - THERMAL_PROTECTION_HYSTERESIS)))
{
rtscheck.RTS_SndData(1 + CEIconGrap, IconPrintstatus); // Heating Status
PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 1 : PrinterStatusKey[1]);
}
else if (getActualTemp_celsius(BED) > (getTargetTemp_celsius(BED) + THERMAL_PROTECTION_BED_HYSTERESIS) || (getActualTemp_celsius(H0) > (getTargetTemp_celsius(H0) + THERMAL_PROTECTION_HYSTERESIS)))
{
rtscheck.RTS_SndData(8 + CEIconGrap, IconPrintstatus); // Cooling Status
PrinterStatusKey[1] = (PrinterStatusKey[1] == 0 ? 2 : PrinterStatusKey[1]);
}
rtscheck.RTS_SndData(getZOffset_mm() * 100, 0x1026);
//float temp_buf = getActualTemp_celsius(H0);
rtscheck.RTS_SndData(getActualTemp_celsius(H0), NozzleTemp);
rtscheck.RTS_SndData(getActualTemp_celsius(BED), Bedtemp);
rtscheck.RTS_SndData(getTargetTemp_celsius(H0), NozzlePreheat);
rtscheck.RTS_SndData(getTargetTemp_celsius(BED), BedPreheat);
if (NozzleTempStatus[0] || NozzleTempStatus[2]) //statuse of loadfilement and unloadfinement when temperature is less than
{
unsigned int IconTemp;
IconTemp = getActualTemp_celsius(H0) * 100 / getTargetTemp_celsius(H0);
if (IconTemp >= 100)
IconTemp = 100;
rtscheck.RTS_SndData(IconTemp, HeatPercentIcon);
if (getActualTemp_celsius(H0) > EXTRUDE_MINTEMP && NozzleTempStatus[0]!=0)
{
NozzleTempStatus[0] = 0;
rtscheck.RTS_SndData(10 * ChangeMaterialbuf[0], FilementUnit1);
rtscheck.RTS_SndData(10 * ChangeMaterialbuf[1], FilementUnit2);
SERIAL_ECHOLN("==Heating Done Change Filament==");
rtscheck.RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
}
else if (getActualTemp_celsius(H0) >= getTargetTemp_celsius(H0) && NozzleTempStatus[2])
{
SERIAL_ECHOPAIR("\n ***NozzleTempStatus[2] =", (int)NozzleTempStatus[2]);
startprogress = NozzleTempStatus[2] = 0;
TPShowStatus = true;
rtscheck.RTS_SndData(4, ExchFlmntIcon);
rtscheck.RTS_SndData(ExchangePageBase + 83, ExchangepageAddr);
}
else if (NozzleTempStatus[2])
{
rtscheck.RTS_SndData((startprogress++) % 5, ExchFlmntIcon);
}
}
if (AutohomeKey)
{
rtscheck.RTS_SndData(AutoHomeIconNum++, AutoZeroIcon);
if (AutoHomeIconNum > 9)
AutoHomeIconNum = 0;
}
if(rtscheck.recdat.addr != DisplayZaxis && rtscheck.recdat.addr != DisplayYaxis && rtscheck.recdat.addr != DisplayZaxis) {
rtscheck.RTS_SndData(10 * getAxisPosition_mm((axis_t)X), DisplayXaxis);
rtscheck.RTS_SndData(10 * getAxisPosition_mm((axis_t)Y), DisplayYaxis);
rtscheck.RTS_SndData(10 * getAxisPosition_mm((axis_t)Z), DisplayZaxis);
}
if (getLevelingActive())
rtscheck.RTS_SndData(2, AutoLevelIcon); /*Off*/
else
rtscheck.RTS_SndData(3, AutoLevelIcon); /*On*/
}
if (rtscheck.RTS_RecData() > 0)
rtscheck.RTS_HandleData();
}
RTSSHOW::RTSSHOW()
{
recdat.head[0] = snddat.head[0] = FHONE;
recdat.head[1] = snddat.head[1] = FHTWO;
memset(databuf, 0, sizeof(databuf));
}
int RTSSHOW::RTS_RecData()
{
while (Serial2.available() > 0 && (recnum < SizeofDatabuf))
{
databuf[recnum] = Serial2.read();
if (databuf[0] != FHONE) //ignore the invalid data
{
if (recnum > 0) // prevent the program from running.
{
memset(databuf, 0, sizeof(databuf));
recnum = 0;
}
continue;
}
delay_ms(10);
recnum++;
}
if (recnum < 1) //receive nothing
return -1;
else if ((recdat.head[0] == databuf[0]) && (recdat.head[1] == databuf[1]) && recnum > 2)
{
// SERIAL_ECHOLN(" *** RTS_RecData1*** ");
recdat.len = databuf[2];
recdat.command = databuf[3];
if (recdat.len == 0x03 && (recdat.command == 0x82 || recdat.command == 0x80) && (databuf[4] == 0x4F) && (databuf[5] == 0x4B)) //response for writing byte
{
memset(databuf, 0, sizeof(databuf));
recnum = 0;
//SERIAL_ECHOLN(" *** RTS_RecData1*** ");
return -1;
}
else if (recdat.command == 0x83) //response for reading the data from the variate
{
recdat.addr = databuf[4];
recdat.addr = (recdat.addr << 8) | databuf[5];
recdat.bytelen = databuf[6];
for (unsigned long i = 0; i < recdat.bytelen; i += 2)
{
recdat.data[i / 2] = databuf[7 + i];
recdat.data[i / 2] = (recdat.data[i / 2] << 8) | databuf[8 + i];
}
}
else if (recdat.command == 0x81) //response for reading the page from the register
{
recdat.addr = databuf[4];
recdat.bytelen = databuf[5];
for (unsigned long i = 0; i < recdat.bytelen; i++)
{
recdat.data[i] = databuf[6 + i];
//recdat.data[i]= (recdat.data[i] << 8 )| databuf[7+i];
}
}
}
else
{
memset(databuf, 0, sizeof(databuf));
recnum = 0;
return -1; //receive the wrong data
}
memset(databuf, 0, sizeof(databuf));
recnum = 0;
return 2;
}
void RTSSHOW::RTS_SndData(void)
{
if ((snddat.head[0] == FHONE) && (snddat.head[1] == FHTWO) && snddat.len >= 3)
{
databuf[0] = snddat.head[0];
databuf[1] = snddat.head[1];
databuf[2] = snddat.len;
databuf[3] = snddat.command;
if (snddat.command == 0x80) //to write data to the register
{
databuf[4] = snddat.addr;
for (int i = 0; i < (snddat.len - 2); i++)
databuf[5 + i] = snddat.data[i];
}
else if (snddat.len == 3 && (snddat.command == 0x81)) //to read data from the register
{
databuf[4] = snddat.addr;
databuf[5] = snddat.bytelen;
}
else if (snddat.command == 0x82) //to write data to the variate
{
databuf[4] = snddat.addr >> 8;
databuf[5] = snddat.addr & 0xFF;
for (int i = 0; i < (snddat.len - 3); i += 2)
{
databuf[6 + i] = snddat.data[i / 2] >> 8;
databuf[7 + i] = snddat.data[i / 2] & 0xFF;
}
}
else if (snddat.len == 4 && (snddat.command == 0x83)) //to read data from the variate
{
databuf[4] = snddat.addr >> 8;
databuf[5] = snddat.addr & 0xFF;
databuf[6] = snddat.bytelen;
}
for (int i = 0; i < (snddat.len + 3); i++)
{
Serial2.write(databuf[i]);
delay_us(1);
}
memset(&snddat, 0, sizeof(snddat));
memset(databuf, 0, sizeof(databuf));
snddat.head[0] = FHONE;
snddat.head[1] = FHTWO;
}
}
void RTSSHOW::RTS_SndData(const String &s, unsigned long addr, unsigned char cmd /*= VarAddr_W*/)
{
if (s.length() < 1)
return;
RTS_SndData(s.c_str(), addr, cmd);
}
void RTSSHOW::RTS_SndData(const char *str, unsigned long addr, unsigned char cmd /*= VarAddr_W*/)
{
int len = strlen(str);
if (len > 0)
{
databuf[0] = FHONE;
databuf[1] = FHTWO;
databuf[2] = 3 + len;
databuf[3] = cmd;
databuf[4] = addr >> 8;
databuf[5] = addr & 0x00FF;
for (int i = 0; i < len; i++)
databuf[6 + i] = str[i];
for (int i = 0; i < (len + 6); i++)
{
Serial2.write(databuf[i]);
delay_us(1);
}
memset(databuf, 0, sizeof(databuf));
}
}
void RTSSHOW::RTS_SndData(char c, unsigned long addr, unsigned char cmd /*= VarAddr_W*/)
{
snddat.command = cmd;
snddat.addr = addr;
snddat.data[0] = (unsigned long)c;
snddat.data[0] = snddat.data[0] << 8;
snddat.len = 5;
RTS_SndData();
}
void RTSSHOW::RTS_SndData(unsigned char *str, unsigned long addr, unsigned char cmd) { RTS_SndData((char *)str, addr, cmd); }
void RTSSHOW::RTS_SndData(int n, unsigned long addr, unsigned char cmd /*= VarAddr_W*/)
{
if (cmd == VarAddr_W)
{
if ((uint8_t)n > 0xFFFF)
{
snddat.data[0] = n >> 16;
snddat.data[1] = n & 0xFFFF;
snddat.len = 7;
}
else
{
snddat.data[0] = n;
snddat.len = 5;
}
}
else if (cmd == RegAddr_W)
{
snddat.data[0] = n;
snddat.len = 3;
}
else if (cmd == VarAddr_R)
{
snddat.bytelen = n;
snddat.len = 4;
}
snddat.command = cmd;
snddat.addr = addr;
RTS_SndData();
}
void RTSSHOW::RTS_SndData(unsigned int n, unsigned long addr, unsigned char cmd) { RTS_SndData((int)n, addr, cmd); }
void RTSSHOW::RTS_SndData(float n, unsigned long addr, unsigned char cmd) { RTS_SndData((int)n, addr, cmd); }
void RTSSHOW::RTS_SndData(long n, unsigned long addr, unsigned char cmd) { RTS_SndData((unsigned long)n, addr, cmd); }
void RTSSHOW::RTS_SndData(unsigned long n, unsigned long addr, unsigned char cmd /*= VarAddr_W*/)
{
if (cmd == VarAddr_W)
{
if (n > 0xFFFF)
{
snddat.data[0] = n >> 16;
snddat.data[1] = n & 0xFFFF;
snddat.len = 7;
}
else
{
snddat.data[0] = n;
snddat.len = 5;
}
}
else if (cmd == VarAddr_R)
{
snddat.bytelen = n;
snddat.len = 4;
}
snddat.command = cmd;
snddat.addr = addr;
RTS_SndData();
}
void RTSSHOW::RTS_SDCardUpate(void)
{
SERIAL_ECHOLN("SDUpdate");
if (isMediaInserted() != lcd_sd_status)
{
SERIAL_ECHOLN("LCD Status Differs ");
if (isMediaInserted()) //sd_status = true
{
SERIAL_ECHOLN("MediaInserted");
#if ENABLED(POWER_LOSS_RECOVERY)
init_power_off_info();
#endif
}
else
{
if (CardCheckStatus[0] == 1) // heating or printing
{
stopPrint();
CardCheckStatus[0] = 0; //cancel to check card during printing the gcode file
}
RTS_SndData(6 + CEIconGrap, IconPrintstatus);
for (int i = 0; i < CardRecbuf.Filesum; i++)
{
for (int j = 0; j < 10; j++)
RTS_SndData(0, CardRecbuf.addr[i] + j);
//RTS_SndData(4,FilenameIcon+1+i);
RTS_SndData((unsigned long)0xFFFF, FilenameNature + (i + 1) * 16); // white
}
for (int j = 0; j < 10; j++)
{
RTS_SndData(0, Printfilename + j); //clean screen.
RTS_SndData(0, Choosefilename + j); //clean filename
}
for (int j = 0; j < 8; j++)
RTS_SndData(0, FilenameCount + j);
for (int j = 1; j <= 20; j++) //clean filename Icon
{
RTS_SndData(10, FilenameIcon + j);
RTS_SndData(10, FilenameIcon1 + j);
}
memset(&CardRecbuf, 0, sizeof(CardRecbuf));
}
lcd_sd_status = isMediaInserted();
}
//SERIAL_ECHOPAIR("\n ***CardUpdate = ",CardUpdate);
//SERIAL_ECHOPAIR("\n ***lcd_sd_status = ",lcd_sd_status);
//SERIAL_ECHOPAIR("\n ***card.cardOK = ",card.cardOK);
if (CardUpdate && lcd_sd_status && isMediaInserted()) // represents to update file list
{
//SERIAL_PROTOCOLLN(" ***test7*** ");
for (int j = 0; j < 10; j++) //clean filename
RTS_SndData(0, Choosefilename + j);
for (int j = 0; j < 8; j++)
RTS_SndData(0, FilenameCount + j);
for (int i = 0; i < CardRecbuf.Filesum; i++)
{
delay_ms(3);
RTS_SndData(CardRecbuf.Cardshowfilename[i], CardRecbuf.addr[i]);
RTS_SndData(1, FilenameIcon + 1 + i);
RTS_SndData((unsigned long)0xFFFF, FilenameNature + (i + 1) * 16); // white
RTS_SndData(10, FilenameIcon1 + 1 + i);
}
CardUpdate = false;
SERIAL_ECHO("====end====");
}
}
void RTSSHOW::RTS_HandleData()
{
int Checkkey = -1;
SERIAL_ECHOLN(" *******RTS_HandleData******** ");
if (waitway > 0) //for waiting
{
SERIAL_ECHOPAIR("waitway ==", (int)waitway);
memset(&recdat, 0, sizeof(recdat));
recdat.head[0] = FHONE;
recdat.head[1] = FHTWO;
return;
}
SERIAL_ECHOPAIR("recdat.data[0] ==", recdat.data[0]);
SERIAL_ECHOPAIR("recdat.addr ==", recdat.addr);
for (int i = 0; Addrbuf[i] != 0; i++)
{
if (recdat.addr == Addrbuf[i])
{
if (Addrbuf[i] >= Stopprint && Addrbuf[i] <= Resumeprint)
Checkkey = PrintChoice;
else if (Addrbuf[i] == NzBdSet || Addrbuf[i] == NozzlePreheat || Addrbuf[i] == BedPreheat)
Checkkey = ManualSetTemp;
else if (Addrbuf[i] >= AutoZero && Addrbuf[i] <= DisplayZaxis)
Checkkey = XYZEaxis;
else if (Addrbuf[i] >= FilementUnit1 && Addrbuf[i] <= FilementUnit2)
Checkkey = Filement;
else
Checkkey = i;
break;
}
}
if (recdat.addr >= SDFILE_ADDR && recdat.addr <= (SDFILE_ADDR + 10 * (FileNum + 1)))
Checkkey = Filename;
if (Checkkey < 0)
{
memset(&recdat, 0, sizeof(recdat));
recdat.head[0] = FHONE;
recdat.head[1] = FHTWO;
return;
}
SERIAL_ECHO("== Checkkey==");
SERIAL_ECHO(Checkkey);
switch (Checkkey)
{
case Printfile:
if (recdat.data[0] == 1) // card
{
InforShowStatus = false;
CardUpdate = true;
CardRecbuf.recordcount = -1;
RTS_SDCardUpate();
SERIAL_ECHO("\n Handle Data PrintFile 1 Setting Screen ");
RTS_SndData(ExchangePageBase + 46, ExchangepageAddr);
}
else if (recdat.data[0] == 2) // return after printing result.
{
InforShowStatus = true;
TPShowStatus = false;
stopPrint();
injectCommands_P(PSTR("M84"));
RTS_SndData(11, FilenameIcon);
RTS_SndData(0, PrintscheduleIcon);
RTS_SndData(0, PrintscheduleIcon + 1);
RTS_SndData(0, Percentage);
delay_ms(2);
RTS_SndData(0, Timehour);
RTS_SndData(0, Timemin);
SERIAL_ECHO("\n Handle Data PrintFile 2 Setting Screen ");
RTS_SndData(ExchangePageBase + 45, ExchangepageAddr); //exchange to 45 page
}
else if (recdat.data[0] == 3) // Temperature control
{
InforShowStatus = true;
TPShowStatus = false;
SERIAL_ECHO("\n Handle Data PrintFile 3 Setting Screen ");
if (FanStatus)
RTS_SndData(ExchangePageBase + 58, ExchangepageAddr); //exchange to 58 page, the fans off
else
RTS_SndData(ExchangePageBase + 57, ExchangepageAddr); //exchange to 57 page, the fans on
}
else if (recdat.data[0] == 4) //Settings
InforShowStatus = false;
break;
case Ajust:
if (recdat.data[0] == 1)
{
InforShowStatus = false;
FanStatus ? RTS_SndData(2, FanKeyIcon) : RTS_SndData(3, FanKeyIcon);
}
else if (recdat.data[0] == 2)
{
SERIAL_ECHO("\n Handle Data Adjust 2 Setting Screen ");
InforShowStatus = true;
if (PrinterStatusKey[1] == 3) // during heating
{
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
}
else if (PrinterStatusKey[1] == 4)
{
RTS_SndData(ExchangePageBase + 54, ExchangepageAddr);
}
else
{
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
}
}
else if (recdat.data[0] == 3)
{
if (FanStatus) //turn on the fan
{
RTS_SndData(3, FanKeyIcon);
setTargetFan_percent(100, FAN0);
FanStatus = false;
}
else //turn off the fan
{
RTS_SndData(2, FanKeyIcon);
setTargetFan_percent(0, FAN0);
FanStatus = true;
}
}
else if (recdat.data[0] == 4)
{
if (PrintMode) // normal printing mode
{
RTS_SndData(2, FanKeyIcon + 1);
PrintMode = false;
}
else // power saving mode
{
RTS_SndData(3, FanKeyIcon + 1);
PrintMode = true;
}
}
break;
case Feedrate:
setFeedrate_percent(recdat.data[0]);
break;
case PrintChoice:
if (recdat.addr == Stopprint)
{
RTS_SndData(ExchangePageBase + 45, ExchangepageAddr);
RTS_SndData(0, Timehour);
RTS_SndData(0, Timemin);
CardCheckStatus[0] = 0; // close the key of checking card in printing
stopPrint();
}
else if (recdat.addr == Pauseprint)
{
if (recdat.data[0] != 0xF1)
break;
RTS_SndData(ExchangePageBase + 54, ExchangepageAddr);
pausePrint();
}
else if (recdat.addr == Resumeprint && recdat.data[0] == 1)
{
resumePrint();
PrinterStatusKey[1] = 0;
InforShowStatus = true;
RTS_SndData(0 + CEIconGrap, IconPrintstatus);
PrintStatue[1] = 0;
//PrinterStatusKey[1] = 3;
CardCheckStatus[0] = 1; // open the key of checking card in printing
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
}
if (recdat.addr == Resumeprint && recdat.data[0] == 2) // warming
{
NozzleTempStatus[2] = 1;
PrinterStatusKey[1] = 0;
InforShowStatus = true;
setTargetTemp_celsius((float)temphot, H0);
startprogress = 0;
RTS_SndData(ExchangePageBase + 82, ExchangepageAddr);
}
break;
case Zoffset:
//SERIAL_ECHOPAIR("\n rts_probe_zoffset = ",rts_probe_zoffset);
//SERIAL_ECHOPAIR("\n rcv data = ",recdat.data[0]);
float tmp_zprobe_offset;
if (recdat.data[0] >= 32768)
{
tmp_zprobe_offset = ((float)recdat.data[0] - 65536) / 100;
}
else
{
tmp_zprobe_offset = ((float)recdat.data[0]) / 100;
}
if (WITHIN((tmp_zprobe_offset), Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
{
babystepAxis_steps((400 * (getZOffset_mm() - tmp_zprobe_offset) * -1), (axis_t)Z);
setZOffset_mm(tmp_zprobe_offset);
RTS_SndData(getZOffset_mm() * 100, 0x1026);
}
injectCommands_P((PSTR("M500")));
break;
case TempControl:
if (recdat.data[0] == 0)
{
InforShowStatus = true;
TPShowStatus = false;
}
else if (recdat.data[0] == 1)
{
/*
if(FanStatus)
RTS_SndData(ExchangePageBase + 60, ExchangepageAddr); //exchange to 60 page, the fans off
else
RTS_SndData(ExchangePageBase + 59, ExchangepageAddr); //exchange to 59 page, the fans on
*/
}
else if (recdat.data[0] == 2)
{
//InforShowStatus = true;
}
else if (recdat.data[0] == 3)
{
if (FanStatus) //turn on the fan
{
setTargetFan_percent(100, FAN0);
FanStatus = false;
RTS_SndData(ExchangePageBase + 57, ExchangepageAddr); //exchange to 57 page, the fans on
}
else //turn off the fan
{
setTargetFan_percent(0, FAN0);
FanStatus = true;
RTS_SndData(ExchangePageBase + 58, ExchangepageAddr); //exchange to 58 page, the fans on
}
}
else if (recdat.data[0] == 5) //PLA mode
{
setTargetTemp_celsius(PREHEAT_1_TEMP_HOTEND, H0);
setTargetTemp_celsius(PREHEAT_1_TEMP_BED, BED);
RTS_SndData(PREHEAT_1_TEMP_HOTEND, NozzlePreheat);
RTS_SndData(PREHEAT_1_TEMP_BED, BedPreheat);
}
else if (recdat.data[0] == 6) //ABS mode
{
setTargetTemp_celsius(PREHEAT_2_TEMP_HOTEND, H0);
setTargetTemp_celsius(PREHEAT_2_TEMP_BED, BED);
RTS_SndData(PREHEAT_2_TEMP_HOTEND, NozzlePreheat);
RTS_SndData(PREHEAT_2_TEMP_BED, BedPreheat);
}
else if (recdat.data[0] == 0xF1)
{
//InforShowStatus = true;
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
setTargetFan_percent(0, (fan_t)i);
#endif
FanStatus = false;
setTargetTemp_celsius(0.0, H0);
setTargetTemp_celsius(0.0, BED);
RTS_SndData(0, NozzlePreheat);
delay_ms(1);
RTS_SndData(0, BedPreheat);
delay_ms(1);
RTS_SndData(8 + CEIconGrap, IconPrintstatus);
RTS_SndData(ExchangePageBase + 57, ExchangepageAddr);
PrinterStatusKey[1] = 2;
}
break;
case ManualSetTemp:
if (recdat.addr == NzBdSet)
{
if (recdat.data[0] == 0)
{
if (FanStatus)
RTS_SndData(ExchangePageBase + 58, ExchangepageAddr); //exchange to 58 page, the fans off
else
RTS_SndData(ExchangePageBase + 57, ExchangepageAddr); //exchange to 57 page, the fans on
}
else if (recdat.data[0] == 1)
{
setTargetTemp_celsius(0.0, H0);
RTS_SndData(0, NozzlePreheat);
}
else if (recdat.data[0] == 2)
{
setTargetTemp_celsius(0.0, BED);
RTS_SndData(0, BedPreheat);
}
}
else if (recdat.addr == NozzlePreheat)
{
setTargetTemp_celsius((float)recdat.data[0], H0);
}
else if (recdat.addr == BedPreheat)
{
setTargetTemp_celsius((float)recdat.data[0], BED);
}
break;
case Setting:
if (recdat.data[0] == 0) // return to main page
{
InforShowStatus = true;
TPShowStatus = false;
}
else if (recdat.data[0] == 1) //Bed Autoleveling
{
if (getLevelingActive())
RTS_SndData(3, AutoLevelIcon);
else
RTS_SndData(2, AutoLevelIcon);
RTS_SndData(10, FilenameIcon); //Motor Icon
if (!isPositionKnown())
injectCommands_P(PSTR("G28\nG1F1000Z0.0"));
else
injectCommands_P(PSTR("G1F1000Z0.0"));
waitway = 2;
RTS_SndData(ExchangePageBase + 64, ExchangepageAddr);
}
else if (recdat.data[0] == 2) // Exchange filement
{
InforShowStatus = true;
TPShowStatus = false;
memset(ChangeMaterialbuf, 0, sizeof(ChangeMaterialbuf));
ChangeMaterialbuf[1] = ChangeMaterialbuf[0] = 10;
RTS_SndData(10 * ChangeMaterialbuf[0], FilementUnit1); //It's ChangeMaterialbuf for show,instead of current_position[E_AXIS] in them.
RTS_SndData(10 * ChangeMaterialbuf[1], FilementUnit2);
RTS_SndData(getActualTemp_celsius(H0), NozzleTemp);
RTS_SndData(getTargetTemp_celsius(H0), NozzlePreheat);
delay_ms(2);
RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
}
else if (recdat.data[0] == 3) //Move
{
//InforShowoStatus = false;
AxisPagenum = 0;
RTS_SndData(10 * getAxisPosition_mm((axis_t)X), DisplayXaxis);
RTS_SndData(10 * getAxisPosition_mm((axis_t)Y), DisplayYaxis);
RTS_SndData(10 * getAxisPosition_mm((axis_t)Z), DisplayZaxis);
delay_ms(2);
RTS_SndData(ExchangePageBase + 71, ExchangepageAddr);
}
else if (recdat.data[0] == 4) //Language
{
//Language change not supported
}
else if (recdat.data[0] == 5) //Printer Information
{
RTS_SndData(WEBSITE_URL, CorpWebsite);
}
else if (recdat.data[0] == 6) // Diabalestepper
{
injectCommands_P(PSTR("M84"));
RTS_SndData(11, FilenameIcon);
}
break;
case ReturnBack:
if (recdat.data[0] == 1) // return to the tool page
{
InforShowStatus = false;
RTS_SndData(ExchangePageBase + 63, ExchangepageAddr);
}
if (recdat.data[0] == 2) // return to the Level mode page
{
RTS_SndData(ExchangePageBase + 64, ExchangepageAddr);
}
break;
case Bedlevel:
#if (ENABLED(MachineCRX) && DISABLED(Force10SProDisplay)) || ENABLED(ForceCRXDisplay)
if (recdat.data[0] == 1) // Top Left
{
injectCommands_P(PSTR("G1F1000Z3\nG1X30Y30F5000\nG1F1000 Z0"));
waitway = 2;
}
else if (recdat.data[0] == 2) // Top Right
{
injectCommands_P(PSTR("G1F1000Z3\nG1X270Y30F5000\nG1F1000Z0"));
waitway = 2;
}
else if (recdat.data[0] == 3) // Centre
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X150 Y150 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 4) // Bottom Left
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X30 Y270 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 5) // Bottom Right
{
waitway = 4; //only for prohibiting to receive massage
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X270 Y270 F5000\nG1 F2000 Z0")));
waitway = 2;
}
break;
#else
if (recdat.data[0] == 1) // Z-axis to home
{
// Disallow Z homing if X or Y are unknown
if (!isAxisPositionKnown((axis_t)X) || !isAxisPositionKnown((axis_t)Y))
injectCommands_P(PSTR("G28\nG1F1500Z0.0"));
else
injectCommands_P(PSTR("G28Z\nG1F1500Z0.0"));
RTS_SndData(getZOffset_mm() * 100, 0x1026);
}
else if (recdat.data[0] == 2) // Z-axis to Up
{
//current_position[Z_AXIS] += 0.1;
//RTS_line_to_current(Z_AXIS);
if (WITHIN((getZOffset_mm() + 0.1), Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
{
babystepAxis_steps(40, (axis_t)Z);
setZOffset_mm(getZOffset_mm() + 0.1);
RTS_SndData(getZOffset_mm() * 100, 0x1026);
injectCommands_P(PSTR("M500"));
}
}
else if (recdat.data[0] == 3) // Z-axis to Down
{
if (WITHIN((getZOffset_mm() - 0.1), Z_PROBE_OFFSET_RANGE_MIN, Z_PROBE_OFFSET_RANGE_MAX))
{
babystepAxis_steps(-40, (axis_t)Z);
setZOffset_mm(getZOffset_mm() - 0.1);
RTS_SndData(getZOffset_mm() * 100, 0x1026);
injectCommands_P(PSTR("M500"));
}
}
else if (recdat.data[0] == 4) // Assitant Level
{
setLevelingActive(false); // FIX ME
if (!isPositionKnown())
injectCommands_P((PSTR("G28\nG1 F1000 Z0.0")));
else
injectCommands_P((PSTR("G1 F1000 Z0.0")));
waitway = 2;
RTS_SndData(ExchangePageBase + 84, ExchangepageAddr);
}
else if (recdat.data[0] == 5) // AutoLevel "Measuring" Button
{
waitway = 3; //only for prohibiting to receive massage
RTS_SndData(3, AutolevelIcon);
bool zig = true;
for (uint8_t yCount = 0, showcount = 0; yCount < GRID_MAX_POINTS_Y; yCount++)
{
int8_t inStart, inStop, inInc;
if (zig)
{ // away from origin
inStart = 0;
inStop = GRID_MAX_POINTS_X;
inInc = 1;
}
else
{ // towards origin
inStart = GRID_MAX_POINTS_X - 1;
inStop = -1;
inInc = -1;
}
zig ^= true; // zag
for (int8_t xCount = inStart; xCount != inStop; xCount += inInc)
{
if ((showcount++) < (GRID_MAX_POINTS_X * GRID_MAX_POINTS_X))
{
rtscheck.RTS_SndData(ExtUI::getMeshPoint(xCount, yCount) * 1000, AutolevelVal + (showcount - 1) * 2);
//rtscheck.RTS_SndData(showcount, AutolevelIcon);
}
}
}
RTS_SndData(ExchangePageBase + 85, ExchangepageAddr);
injectCommands_P(PSTR(USER_GCODE_1));
}
else if (recdat.data[0] == 6) // Assitant Level , Centre 1
{
injectCommands_P(PSTR("G1 F1000 Z3\nG1 X150 Y150 F5000\nG1 F1000 Z0"));
waitway = 2;
}
else if (recdat.data[0] == 7) // Assitant Level , Front Left 2
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X30 Y30 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 8) // Assitant Level , Front Right 3
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X270 Y30 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 9) // Assitant Level , Back Right 4
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X270 Y270 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 10) // Assitant Level , Back Left 5
{
injectCommands_P((PSTR("G1 F1000 Z3\nG1 X30 Y270 F5000\nG1 F1000 Z0")));
waitway = 2;
}
else if (recdat.data[0] == 11) // Autolevel switch
{
if (getLevelingActive()) //turn on the Autolevel
{
RTS_SndData(3, AutoLevelIcon);
}
else //turn off the Autolevel
{
RTS_SndData(2, AutoLevelIcon);
}
RTS_SndData(getZOffset_mm() * 100, 0x1026);
}
RTS_SndData(10, FilenameIcon);
#endif
break;
case XYZEaxis:
axis_t axis;
float min, max;
waitway = 4;
if (recdat.addr == DisplayXaxis)
{
axis = X;
min = X_MIN_POS;
max = X_MAX_POS;
}
else if (recdat.addr == DisplayYaxis)
{
axis = Y;
min = Y_MIN_POS;
max = Y_MAX_POS;
}
else if (recdat.addr == DisplayZaxis)
{
axis = Z;
min = Z_MIN_POS;
max = Z_MAX_POS;
}
else if (recdat.addr == AutoZero)
{
if (recdat.data[0] == 3) //autohome
{
waitway = 4;
injectCommands_P((PSTR("G28\nG1 F1000 Z10")));
InforShowStatus = AutohomeKey = true;
AutoHomeIconNum = 0;
RTS_SndData(ExchangePageBase + 74, ExchangepageAddr);
RTS_SndData(10, FilenameIcon);
}
else
{
AxisPagenum = recdat.data[0];
waitway = 0;
}
break;
}
targetPos = ((float)recdat.data[0]) / 10;
if (targetPos < min)
targetPos = min;
else if (targetPos > max)
targetPos = max;
SERIAL_ECHOLNPAIR("Target Pos:", targetPos);
SERIAL_ECHOLNPAIR("Target Axis:", axis);
SERIAL_ECHOLNPAIR("Current X Pos:", getAxisPosition_mm((axis_t)X));
SERIAL_ECHOLNPAIR("Current Y Pos:", getAxisPosition_mm((axis_t)Y));
SERIAL_ECHOLNPAIR("Current Z Pos:", getAxisPosition_mm((axis_t)Z));
//char tmpcmd1[30];
//if (axis==X)
// sprintf_P(tmpcmd1, PSTR("G1 X%i F2000"), targetPos);
// else if (axis==Y)
// sprintf_P(tmpcmd1, PSTR("G1 Y%i F2000"), targetPos);
// else if (axis==Z)
// sprintf_P(tmpcmd1, PSTR("G1 Z%i F2000"), targetPos);
//injectCommands_P(tmpcmd1);
setAxisPosition_mm(targetPos, axis);
delay_ms(1);
RTS_SndData(10 * getAxisPosition_mm((axis_t)X), DisplayXaxis);
RTS_SndData(10 * getAxisPosition_mm((axis_t)Y), DisplayYaxis);
RTS_SndData(10 * getAxisPosition_mm((axis_t)Z), DisplayZaxis);
delay_ms(1);
waitway = 0;
RTS_SndData(10, FilenameIcon);
break;
case Filement:
unsigned int IconTemp;
if (recdat.addr == Exchfilement)
{
if (getActualTemp_celsius(H0) < EXTRUDE_MINTEMP && recdat.data[0] < 5)
{
RTS_SndData((int)EXTRUDE_MINTEMP, 0x1020);
delay_ms(5);
RTS_SndData(ExchangePageBase + 66, ExchangepageAddr);
break;
}
switch(recdat.data[0])
{
case 1 : // Unload filement1
{
setAxisPosition_mm((getAxisPosition_mm(E0) - ChangeMaterialbuf[0]), E0);
break;
}
case 2: // Load filement1
{
setAxisPosition_mm((getAxisPosition_mm(E0) + ChangeMaterialbuf[0]), E0);
break;
}
case 3: // Unload filement2
{
setAxisPosition_mm((getAxisPosition_mm(E1) - ChangeMaterialbuf[1]), E1);
break;
}
case 4: // Load filement2
{
setAxisPosition_mm((getAxisPosition_mm(E1) + ChangeMaterialbuf[1]), E1);
break;
}
case 5: // sure to heat
{
NozzleTempStatus[0] = 1;
//InforShowoStatus = true;
setTargetTemp_celsius((PREHEAT_1_TEMP_HOTEND+10), H0);
IconTemp = getActualTemp_celsius(H0) * 100 / getTargetTemp_celsius(H0);
if (IconTemp >= 100)
IconTemp = 100;
RTS_SndData(IconTemp, HeatPercentIcon);
RTS_SndData(getActualTemp_celsius(H0), NozzleTemp);
RTS_SndData(getTargetTemp_celsius(H0), NozzlePreheat);
delay_ms(5);
RTS_SndData(ExchangePageBase + 68, ExchangepageAddr);
break;
}
case 6: //cancel to heat
{
RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
break;
}
case 0xF1: //Sure to cancel heating
{
//InforShowoStatus = true;
NozzleTempStatus[0] = 0;
delay_ms(1);
RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
break;
}
case 0xF0: // not to cancel heating
break;
}
RTS_SndData(10 * ChangeMaterialbuf[0], FilementUnit1); //It's ChangeMaterialbuf for show,instead of current_position[E_AXIS] in them.
RTS_SndData(10 * ChangeMaterialbuf[1], FilementUnit2);
}
else if (recdat.addr == FilementUnit1)
{
ChangeMaterialbuf[0] = ((float)recdat.data[0]) / 10;
}
else if (recdat.addr == FilementUnit2)
{
ChangeMaterialbuf[1] = ((float)recdat.data[0]) / 10;
}
break;
case LanguageChoice:
SERIAL_ECHOPAIR("\n ***recdat.data[0] =", recdat.data[0]);
/*if(recdat.data[0]==1) {
settings.save();
}
else {
injectCommands_P(PSTR("M300"));
}*/
// may at some point use language change screens to save eeprom explicitly
break;
case No_Filement:
SERIAL_ECHOLN("\n No Filament");
//injectCommands_P(PSTR("M876P1"));
if (recdat.data[0] == 1) //Filament is out, resume / cancel selected on screen
{
if (FilementStatus[0] == 2) // check filements status during printing
{
if( (getActiveTool() == E0 && READ(FIL_RUNOUT_PIN) != FIL_RUNOUT_INVERTING) || (getActiveTool() == E1 && READ(FIL_RUNOUT2_PIN) != FIL_RUNOUT_INVERTING)) {
setHostResponse(1); //Send Resume host prompt command
RTS_SndData(1 + CEIconGrap, IconPrintstatus);
PrintStatue[1] = 0;
PrinterStatusKey[1] = 3;
CardCheckStatus[0] = 1; // open the key of checking card in printing
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
FilementStatus[0] = 0; // recover the status waiting to check filements
}
}
else if (FilementStatus[0] == 3)
{
RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
}
}
else if (recdat.data[0] == 0) // Filamet is out, Continue Selected
{
SERIAL_ECHOLN(" Filament Response Yes");
if (FilementStatus[0] == 1)
{
SERIAL_ECHOLN("Filament Stat 0 - 1");
RTS_SndData(ExchangePageBase + 46, ExchangepageAddr);
PrinterStatusKey[0] = 0;
injectCommands_P(PSTR("M876P1"));
}
else if (FilementStatus[0] == 2) // like the pause
{
SERIAL_ECHOLN("Filament Stat 0 - 2");
RTS_SndData(ExchangePageBase + 54, ExchangepageAddr);
injectCommands_P(PSTR("M876P1"));
}
else if (FilementStatus[0] == 3)
{
SERIAL_ECHOLN("Filament Stat 0 - 3");
RTS_SndData(ExchangePageBase + 65, ExchangepageAddr);
}
FilementStatus[0] = 0; // recover the status waiting to check filements
}
break;
#if ENABLED(POWER_LOSS_RECOVERY)
case PwrOffNoF:
//SERIAL_ECHO("\n recdat.data[0] ==");
//SERIAL_ECHO(recdat.data[0]);
//SERIAL_ECHO("\n recdat.addr ==");
//SERIAL_ECHO(recdat.addr);
char cmd1[30];
if (recdat.data[0] == 1) // Yes:continue to print the 3Dmode during power-off.
{
if (power_off_commands_count > 0)
{
sprintf_P(cmd1, PSTR("M190 S%i"), power_off_info.target_temperature_bed);
injectCommands_P(cmd1);
sprintf_P(cmd1, PSTR("M109 S%i"), power_off_info.target_temperature[0]);
injectCommands_P(cmd1);
injectCommands_P(PSTR("M106 S255"));
sprintf_P(cmd1, PSTR("T%i"), power_off_info.saved_extruder);
injectCommands_P(cmd1);
power_off_type_yes = 1;
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
fanSpeeds[i] = FanOn;
#endif
FanStatus = false;
PrintStatue[1] = 0;
PrinterStatusKey[0] = 1;
PrinterStatusKey[1] = 3;
PoweroffContinue = true;
TPShowStatus = InforShowStatus = true;
CardCheckStatus[0] = 1; // open the key of checking card in printing
RTS_SndData(1 + CEIconGrap, IconPrintstatus);
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
//card.startFileprint();
//print_job_timer.power_off_start();
}
}
else if (recdat.data[0] == 2) // No
{
InforShowStatus = true;
TPShowStatus = false;
RTS_SndData(ExchangePageBase + 45, ExchangepageAddr); //exchange to 45 page
stopPrint();
#if ENABLED(SDSUPPORT) && ENABLED(POWEROFF_SAVE_SD_FILE)
card.openPowerOffFile(power_off_info.power_off_filename, O_CREAT | O_WRITE | O_TRUNC | O_SYNC);
power_off_info.valid_head = 0;
power_off_info.valid_foot = 0;
if (card.savePowerOffInfo(&power_off_info, sizeof(power_off_info)) == -1)
{
SERIAL_ECHOLN("Stop to Write power off file failed.");
}
card.closePowerOffFile();
power_off_commands_count = 0;
#endif
wait_for_heatup = false;
PrinterStatusKey[0] = 0;
delay_ms(500); //for system
}
break;
#endif
case Volume:
if (recdat.data[0] < 0)
VolumeSet = 0;
else if (recdat.data[0] > 255)
VolumeSet = 0xFF;
else
VolumeSet = recdat.data[0];
if (VolumeSet == 0)
{
RTS_SndData(0, VolumeIcon);
RTS_SndData(9, SoundIcon);
}
else
{
RTS_SndData((VolumeSet + 1) / 32 - 1, VolumeIcon);
RTS_SndData(8, SoundIcon);
}
//eeprom_write_byte((unsigned char*)FONT_EEPROM+4, VolumeSet);
RTS_SndData(VolumeSet << 8, SoundAddr + 1);
break;
case Filename:
//if(card.cardOK && recdat.data[0] > 0 && recdat.data[0] <= CardRecbuf.Filesum && recdat.addr != 0x20D2)
/*SERIAL_ECHO("\n recdat.data[0] ==");
SERIAL_ECHO(recdat.data[0]);
SERIAL_ECHO("\n recdat.addr ==");
SERIAL_ECHO(recdat.addr); */
SERIAL_ECHOLN("Filename");
if (isMediaInserted() && recdat.addr == FilenameChs)
{
SERIAL_ECHOLN("Filename-Media");
if (recdat.data[0] > (uint8_t)CardRecbuf.Filesum)
break;
SERIAL_ECHOLN("Recdata");
CardRecbuf.recordcount = recdat.data[0] - 1;
for (int j = 0; j < 10; j++)
RTS_SndData(0, Choosefilename + j);
int filelen = strlen(CardRecbuf.Cardshowfilename[CardRecbuf.recordcount]);
filelen = (TEXTBYTELEN - filelen) / 2;
if (filelen > 0)
{
char buf[20];
memset(buf, 0, sizeof(buf));
strncpy(buf, " ", filelen);
strcpy(&buf[filelen], CardRecbuf.Cardshowfilename[CardRecbuf.recordcount]);
RTS_SndData(buf, Choosefilename);
}
else
RTS_SndData(CardRecbuf.Cardshowfilename[CardRecbuf.recordcount], Choosefilename);
for (int j = 0; j < 8; j++)
RTS_SndData(0, FilenameCount + j);
char buf[20];
memset(buf, 0, sizeof(buf));
sprintf(buf, "%d/%d", (int)recdat.data[0], CardRecbuf.Filesum);
RTS_SndData(buf, FilenameCount);
delay_ms(2);
for (int j = 1; j <= CardRecbuf.Filesum; j++)
{
RTS_SndData((unsigned long)0xFFFF, FilenameNature + j * 16); // white
RTS_SndData(10, FilenameIcon1 + j); //clean
}
RTS_SndData((unsigned long)0x87F0, FilenameNature + recdat.data[0] * 16); // Light green
RTS_SndData(6, FilenameIcon1 + recdat.data[0]); // show frame
}
else if (recdat.addr == FilenamePlay)
{
if (recdat.data[0] == 1 && isMediaInserted()) //for sure
{
if (CardRecbuf.recordcount < 0)
break;
//SERIAL_ECHO("*************suceed1**********");
//char cmd[30];
//char* c;
//sprintf_P(cmd, PSTR("M23 %s"), CardRecbuf.Cardfilename[CardRecbuf.recordcount]);
//for (c = &cmd[4]; *c; c++) *c = tolower(*c);
//FilenamesCount = CardRecbuf.recordcount;
//memset(cmdbuf,0,sizeof(cmdbuf));
//strcpy(cmdbuf,cmd);
//InforShowoStatus = true;
//FileList files;
//files.seek(CardRecbuf.recordcount);
printFile(CardRecbuf.Cardfilename[CardRecbuf.recordcount]);
//enqueue_and_echo_command(cmd);
//injectCommands_P(PSTR("M24"));
for (int j = 0; j < 10; j++) //clean screen.
RTS_SndData(0, Printfilename + j);
int filelen = strlen(CardRecbuf.Cardshowfilename[CardRecbuf.recordcount]);
filelen = (TEXTBYTELEN - filelen) / 2;
if (filelen > 0)
{
char buf[20];
memset(buf, 0, sizeof(buf));
strncpy(buf, " ", filelen);
strcpy(&buf[filelen], CardRecbuf.Cardshowfilename[CardRecbuf.recordcount]);
RTS_SndData(buf, Printfilename);
}
else
RTS_SndData(CardRecbuf.Cardshowfilename[CardRecbuf.recordcount], Printfilename);
delay_ms(2);
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
setTargetFan_percent(FanOn, (fan_t)i);
#endif
FanStatus = false;
RTS_SndData(1 + CEIconGrap, IconPrintstatus); // 1 for Heating
delay_ms(2);
RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
TPShowStatus = InforShowStatus = true;
PrintStatue[1] = 0;
PrinterStatusKey[0] = 1;
PrinterStatusKey[1] = 3;
CardCheckStatus[0] = 1; // open the key of checking card in printing
//Update_Time_Value = 0;
}
else if (recdat.data[0] == 0) // return to main page
{
InforShowStatus = true;
TPShowStatus = false;
}
}
break;
default:
break;
}
memset(&recdat, 0, sizeof(recdat));
recdat.head[0] = FHONE;
recdat.head[1] = FHTWO;
}
void onPrinterKilled(PGM_P msg) {
SERIAL_ECHOLN("***kill***");
rtscheck.RTS_SndData(ExchangePageBase + 15, ExchangepageAddr);
delay_ms(3);
int j = 0;
char outmsg[40];
for (j; j < 4; j++)
{
outmsg[j] = '*';
}
while (const char c = pgm_read_byte(msg++)) {
outmsg[j] = c;
j++;
}
for (j; j < 40; j++)
{
outmsg[j] = '*';
}
rtscheck.RTS_SndData(outmsg, MacVersion);
delay_ms(10);
}
void onMediaInserted()
{
SERIAL_ECHOLN("***Initing card is OK***");
ExtUI::FileList files;
files.count();
int addrnum = 0;
int num = 0;
for (uint16_t i = 0; i < files.count() && i < (uint16_t)MaxFileNumber + addrnum; i++)
{
files.seek(i);
files.filename();
const char *pointFilename = files.longFilename();
int filenamelen = strlen(files.longFilename());
int j = 1;
while ((strncmp(&pointFilename[j], ".gcode", 6) && strncmp(&pointFilename[j], ".GCODE", 6)) && (j++) < filenamelen)
;
if (j >= filenamelen)
{
addrnum++;
continue;
}
if (j >= TEXTBYTELEN)
{
//strncpy(&files.longFilename[TEXTBYTELEN -3],"~~",2);
//files.longFilename()[TEXTBYTELEN-1] = '\0';
j = TEXTBYTELEN - 1;
}
delay_ms(3);
strncpy(CardRecbuf.Cardshowfilename[num], files.longFilename(), j);
strcpy(CardRecbuf.Cardfilename[num], files.shortFilename());
CardRecbuf.addr[num] = SDFILE_ADDR + num * 10;
rtscheck.RTS_SndData(CardRecbuf.Cardshowfilename[num], CardRecbuf.addr[num]);
CardRecbuf.Filesum = (++num);
//SERIAL_ECHO(" CardRecbuf.Filesum ==");
//SERIAL_ECHO(CardRecbuf.Filesum);
rtscheck.RTS_SndData(1, FilenameIcon + CardRecbuf.Filesum);
}
rtscheck.RTS_SndData(17, IconPrintstatus);
lcd_sd_status = isMediaInserted();
};
void onMediaError()
{
for (int i = 0; i < MaxFileNumber; i++)
{
for (int j = 0; j < 10; j++)
rtscheck.RTS_SndData(0, SDFILE_ADDR + i * 10 + j);
}
for (int j = 0; j < 10; j++)
{
rtscheck.RTS_SndData(0, Printfilename + j); //clean screen.
rtscheck.RTS_SndData(0, Choosefilename + j); //clean filename
}
for (int j = 0; j < 8; j++)
rtscheck.RTS_SndData(0, FilenameCount + j);
for (int j = 1; j <= MaxFileNumber; j++)
{
rtscheck.RTS_SndData(10, FilenameIcon + j);
rtscheck.RTS_SndData(10, FilenameIcon1 + j);
}
SERIAL_ECHOLN("***Initing card fails***");
rtscheck.RTS_SndData(18, IconPrintstatus);
};
void onMediaRemoved()
{
for (int i = 0; i < MaxFileNumber; i++)
{
for (int j = 0; j < 10; j++)
rtscheck.RTS_SndData(0, SDFILE_ADDR + i * 10 + j);
}
for (int j = 0; j < 10; j++)
{
rtscheck.RTS_SndData(0, Printfilename + j); //clean screen.
rtscheck.RTS_SndData(0, Choosefilename + j); //clean filename
}
for (int j = 0; j < 8; j++)
rtscheck.RTS_SndData(0, FilenameCount + j);
for (int j = 1; j <= MaxFileNumber; j++)
{
rtscheck.RTS_SndData(10, FilenameIcon + j);
rtscheck.RTS_SndData(10, FilenameIcon1 + j);
}
SERIAL_ECHOLN("***Card Removed***");
rtscheck.RTS_SndData(18, IconPrintstatus);
};
void onPlayTone(const uint16_t frequency, const uint16_t duration) {}
void onPrintTimerStarted()
{
SERIAL_ECHOLN("==onPrintTimerStarted==");
#if ENABLED(POWER_LOSS_RECOVERY)
if (PoweroffContinue)
{
injectCommands_P(power_off_commands[0]);
injectCommands_P(power_off_commands[1]);
injectCommands_P((PSTR("G28 X0 Y0")));
}
#endif
PrinterStatusKey[1] = 3;
InforShowStatus = true;
rtscheck.RTS_SndData(4 + CEIconGrap, IconPrintstatus);
delay_ms(10);
rtscheck.RTS_SndData(ExchangePageBase + 53, ExchangepageAddr);
CardCheckStatus[0] = 1; // open the key of checking card in printing
}
void onPrintTimerPaused()
{
SERIAL_ECHOLN("==onPrintTimerPaused==");
rtscheck.RTS_SndData(ExchangePageBase + 87, ExchangepageAddr); //Display Pause Screen
}
void onPrintTimerStopped()
{
SERIAL_ECHOLN("==onPrintTimerStopped==");
if(waitway == 3)
return;
stopPrint();
SERIAL_ECHOLN("stopping ==");
SERIAL_ECHOLN("//action:cancel");
//setTargetTemp_celsius(0, E0);
//setTargetTemp_celsius(0, E1);
//setTargetTemp_celsius(0, BED);
#if ENABLED(SDSUPPORT) && ENABLED(POWEROFF_SAVE_SD_FILE)
card.openPowerOffFile(power_off_info.power_off_filename, O_CREAT | O_WRITE | O_TRUNC | O_SYNC);
power_off_info.valid_head = 0;
power_off_info.valid_foot = 0;
if (card.savePowerOffInfo(&power_off_info, sizeof(power_off_info)) == -1)
{
SERIAL_PROTOCOLLN("Stop to Write power off file failed.");
}
card.closePowerOffFile();
power_off_commands_count = 0;
#endif
#if FAN_COUNT > 0
for (uint8_t i = 0; i < FAN_COUNT; i++)
setTargetFan_percent(FanOff, (fan_t)i);
#endif
FanStatus = true;
PrinterStatusKey[0] = 0;
power_off_type_yes = 1;
InforShowStatus = true;
TPShowStatus = false;
rtscheck.RTS_SndData(ExchangePageBase + 45, ExchangepageAddr);
}
void onFilamentRunout()
{
SERIAL_ECHOLN("==onFilamentRunout==");
PrintStatue[1] = 1; // for returning the corresponding page
PrinterStatusKey[1] = 4;
TPShowStatus = false;
FilementStatus[0] = 2;
rtscheck.RTS_SndData(ExchangePageBase + 78, ExchangepageAddr);
}
void onFilamentRunout(extruder_t extruder)
{
SERIAL_ECHOLN("==onFilamentRunout==");
PrintStatue[1] = 1; // for returning the corresponding page
PrinterStatusKey[1] = 4;
TPShowStatus = false;
FilementStatus[0] = 2;
rtscheck.RTS_SndData(ExchangePageBase + 78, ExchangepageAddr);
}
void onUserConfirmRequired(const char *const msg)
{
PrintStatue[1] = 1; // for returning the corresponding page
PrinterStatusKey[1] = 4;
TPShowStatus = false;
FilementStatus[0] = 2;
rtscheck.RTS_SndData(ExchangePageBase + 78, ExchangepageAddr);
SERIAL_ECHOLN("==onUserConfirmRequired==");
}
void onStatusChanged(const char *const msg)
{
for (int j = 0; j < 40; j++) // Clear old message
rtscheck.RTS_SndData(' ', 0x20E8+j);
rtscheck.RTS_SndData(msg, 0x20E8);
}
void onFactoryReset()
{
SERIAL_ECHOLN("==onFactoryReset==");
}
void onMeshUpdate(const uint8_t xpos, const uint8_t ypos, const float zval)
{
if(waitway==3)
if(isPositionKnown() && (getActualTemp_celsius(BED) >= (getTargetTemp_celsius(BED)-1)))
rtscheck.RTS_SndData(ExchangePageBase + 64, ExchangepageAddr);
bool zig = true;
for (uint8_t yCount = 0, showcount = 0; yCount < GRID_MAX_POINTS_Y; yCount++)
{
int8_t inStart, inStop, inInc;
if (zig)
{ // away from origin
inStart = 0;
inStop = GRID_MAX_POINTS_X;
inInc = 1;
}
else
{ // towards origin
inStart = GRID_MAX_POINTS_X - 1;
inStop = -1;
inInc = -1;
}
zig ^= true; // zag
for (int8_t xCount = inStart; xCount != inStop; xCount += inInc)
{
if ((showcount++) < (GRID_MAX_POINTS_X * GRID_MAX_POINTS_X))
{
rtscheck.RTS_SndData(ExtUI::getMeshPoint(xCount, yCount) * 1000, AutolevelVal + (showcount - 1) * 2);
//rtscheck.RTS_SndData(showcount, AutolevelIcon);
}
}
}
};
void onStoreSettings(char *buff)
{
SERIAL_ECHOLN("==onStoreSettings==");
// This is called when saving to EEPROM (i.e. M500). If the ExtUI needs
// permanent data to be stored, it can write up to eeprom_data_size bytes
// into buff.
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(buff, &myDataStruct, sizeof(myDataStruct));
}
void onLoadSettings(const char *buff)
{
SERIAL_ECHOLN("==onLoadSettings==");
// This is called while loading settings from EEPROM. If the ExtUI
// needs to retrieve data, it should copy up to eeprom_data_size bytes
// from buff
// Example:
// static_assert(sizeof(myDataStruct) <= ExtUI::eeprom_data_size);
// memcpy(&myDataStruct, buff, sizeof(myDataStruct));
}
void onConfigurationStoreWritten(bool success)
{
SERIAL_ECHOLN("==onConfigurationStoreWritten==");
// This is called after the entire EEPROM has been written,
// whether successful or not.
}
void onConfigurationStoreRead(bool success)
{
SERIAL_ECHOLN("==onConfigurationStoreRead==");
#if HAS_MESH && (ANY(MachineCR10SPro, MachineEnder5Plus, MachineCR10Max) || ENABLED(Force10SProDisplay))
if (ExtUI::getMeshValid())
{
bool zig = true;
for (uint8_t yCount = 0, showcount = 0; yCount < GRID_MAX_POINTS_Y; yCount++)
{
int8_t inStart, inStop, inInc;
if (zig)
{ // away from origin
inStart = 0;
inStop = GRID_MAX_POINTS_X;
inInc = 1;
}
else
{ // towards origin
inStart = GRID_MAX_POINTS_X - 1;
inStop = -1;
inInc = -1;
}
zig ^= true; // zag
for (int8_t xCount = inStart; xCount != inStop; xCount += inInc)
{
if ((showcount++) < (GRID_MAX_POINTS_X * GRID_MAX_POINTS_X))
{
rtscheck.RTS_SndData(ExtUI::getMeshPoint(xCount, yCount) * 1000, AutolevelVal + (showcount - 1) * 2);
//rtscheck.RTS_SndData(showcount, AutolevelIcon);
}
}
}
rtscheck.RTS_SndData(3, AutoLevelIcon); //2=On, 3=Off
setLevelingActive(true);
}
else
{
rtscheck.RTS_SndData(2, AutoLevelIcon); /*Off*/
setLevelingActive(false);
}
#endif
SERIAL_ECHOLNPAIR("\n init zprobe_zoffset = ", getZOffset_mm());
rtscheck.RTS_SndData(getZOffset_mm() * 100, 0x1026);
}
} // namespace ExtUI
Reference in New Issue View Git Blame Copy Permalink