; ============================================================
;  CREALITY CR-X  -  COLD MOTION-ONLY SELF-TEST
;  NO heating, NO extrusion. Safest first pass to verify motion.
;  Run this FIRST; if motion is clean, run the full self-test.
; ============================================================
M117 COLD test: init
G90
M107
G28                 ; home
G4 S2
G1 Z20 F600

; X sweep
M117 X sweep
G1 X5 F3000
G1 X295 F3000
G1 X150 F3000
G4 S1
; Y sweep
M117 Y sweep
G1 Y5 F3000
G1 Y295 F3000
G1 Y150 F3000
G4 S1
; Z sweep (watch both lead screws stay synced)
M117 Z sweep
G1 Z5 F600
G1 Z380 F600
G1 Z20 F600
G4 S1
; Diagonals + corners
M117 corners
G1 X5 Y5 F4000
G1 X295 Y295 F4000
G1 X5 Y295 F4000
G1 X295 Y5 F4000
G1 X150 Y150 F4000
G4 S1
; Speed range
M117 speed check
G1 X50 Y50 F6000
G1 X250 Y250 F6000
G1 X50 Y50 F1200
G1 X150 Y150 F3000

M117 parking
G1 Z50 F600
G1 X10 Y295 F4000
M84
M117 COLD test DONE