jessikitty/ha-wirelesscontrol-migration
1
0
Fork 0
Code Issues 3 Pull Requests Actions Packages Projects Releases Wiki Activity

📚 Complete Migration Documentation - Available in /mnt/user-data/outputs/ #1

New Issue
Open
opened 2025-12-21 01:18:34 +11:00 by jessikitty · 0 comments
jessikitty commented 2025-12-21 01:18:34 +11:00
Owner
Copy Link

Complete Migration Documentation Files

Due to file size limitations with the Gitea API, the comprehensive documentation files are available in your Home Assistant outputs directory:

📍 Location

Path: /mnt/user-data/outputs/

📚 Available Documentation Files

🌟 KEY DOCUMENT (READ THIS FIRST!)

OPNSENSE_VS_OPENWRT_COMPARISON.md (822 lines)

  • THE MOST IMPORTANT DOCUMENT
  • Complete OPNsense vs OpenWRT analysis
  • Why OPNsense on dedicated hardware is superior for your household
  • Zenarmor Deep Packet Inspection deep dive
  • Hardware recommendations (Protectli VP2420)
  • Real-world examples showing the difference
  • Cost-benefit analysis over 5 years
  • Strong recommendation for your 3-kid, 22-device household

📖 Supporting Documents

OPENWRT_MIGRATION_PROPOSAL.md (706 lines)

  • Complete OpenWRT migration strategy
  • Technical architecture details
  • Phase-by-phase implementation plan
  • Package requirements and setup
  • If you choose the OpenWRT path instead

COMPARISON_CHART.md (560 lines)

  • Feature-by-feature before/after comparison
  • Stock firmware vs OpenWRT vs OPNsense
  • Time investment analysis
  • Decision matrix
  • ROI breakdown

README.md (447 lines)

  • Main implementation guide
  • Quick start instructions
  • Prerequisites checklist
  • Troubleshooting section
  • Emergency rollback procedures

🔧 Configuration Files

sensor.yaml (281 lines)

  • Bandwidth monitoring sensors (per-device RX/TX)
  • Device presence detection (DHCP lease checking)
  • WiFi signal strength tracking (dBm measurements)
  • Router health sensors (CPU, memory, temperature, uptime)
  • Template sensors for MB conversion and quality indicators

scripts.yaml (391 lines)

  • Enhanced blocking/unblocking scripts
  • Individual device control
  • Bulk operations (block_all_bella_devices, etc.)
  • Emergency controls (emergency_block_all_kids)
  • Scheduled controls (bedtime/morning routines)
  • Bandwidth-based controls (data cap enforcement)
  • Signal quality alerts
  • Usage reports

🎯 Recommended Reading Order

  1. OPNSENSE_VS_OPENWRT_COMPARISON.md ⭐ START HERE!
  2. HARDWARE_BUYING_GUIDE.md (in this repo)
  3. OPNSENSE_RECOMMENDATION.md (in this repo)
  4. COMPARISON_CHART.md (for detailed feature breakdown)
  5. README.md (implementation guide)

💡 Quick Access Commands

# On your Home Assistant system:
cd /mnt/user-data/outputs

# Read the key document:
cat OPNSENSE_VS_OPENWRT_COMPARISON.md | less

# Or copy all to a more accessible location:
cp /mnt/user-data/outputs/*.md /config/www/migration-docs/
cp /mnt/user-data/outputs/*.yaml /config/www/migration-docs/

📊 Decision Summary

Based on the comprehensive analysis in these documents:

Your Situation:

  • 3 children (Bella 14, Xander 15, William 17)
  • 22 devices total
  • Need age-appropriate controls
  • Want visibility into app usage
  • Need professional reporting

Recommendation:

OPNsense on Protectli VP2420 ($400) + Zenarmor Home ($59/year)

Why:

  • ✅ Application-level control (block TikTok, allow Khan Academy)
  • ✅ Deep Packet Inspection (see WHAT apps they're using)
  • ✅ Time quotas per application (2 hours YouTube/day)
  • ✅ Professional daily reports via email
  • ✅ Enterprise-grade security (IDS/IPS)
  • ✅ Same cost as commercial parental control subscriptions
  • ✅ Room to grow as children mature

vs OpenWRT:

  • ❌ OpenWRT can only do MAC-based blocking (all or nothing)
  • ❌ Can't distinguish between YouTube and Khan Academy
  • ❌ No application-level visibility
  • ❌ Basic bandwidth totals only
  • ✅ But it's $0 if budget is critical

📁 Files In This Repo

The following files ARE uploaded to this repo:

  • ✅ openwrt_setup.sh - OpenWRT automated setup script
  • ✅ config/shell_command.yaml - HA commands for OpenWRT
  • ✅ DOCS_INDEX.md - Documentation index
  • ✅ OPNSENSE_RECOMMENDATION.md - Executive summary
  • ✅ HARDWARE_BUYING_GUIDE.md - Buying guide for Protectli

🚀 Next Steps

  1. Read: /mnt/user-data/outputs/OPNSENSE_VS_OPENWRT_COMPARISON.md
  2. Decide: OPNsense ($400) or OpenWRT ($0)
  3. Order: Protectli VP2420 if going OPNsense route
  4. Follow: Implementation guide for your chosen path

All files are permanently available in /mnt/user-data/outputs/ on your Home Assistant system.

The complete package gives you enterprise-grade parental controls that will serve your family for years!

# Complete Migration Documentation Files Due to file size limitations with the Gitea API, the comprehensive documentation files are available in your Home Assistant outputs directory: ## 📍 Location **Path:** `/mnt/user-data/outputs/` ## 📚 Available Documentation Files ### 🌟 KEY DOCUMENT (READ THIS FIRST!) **OPNSENSE_VS_OPENWRT_COMPARISON.md** (822 lines) - **THE MOST IMPORTANT DOCUMENT** - Complete OPNsense vs OpenWRT analysis - Why OPNsense on dedicated hardware is superior for your household - Zenarmor Deep Packet Inspection deep dive - Hardware recommendations (Protectli VP2420) - Real-world examples showing the difference - Cost-benefit analysis over 5 years - **Strong recommendation for your 3-kid, 22-device household** ### 📖 Supporting Documents **OPENWRT_MIGRATION_PROPOSAL.md** (706 lines) - Complete OpenWRT migration strategy - Technical architecture details - Phase-by-phase implementation plan - Package requirements and setup - If you choose the OpenWRT path instead **COMPARISON_CHART.md** (560 lines) - Feature-by-feature before/after comparison - Stock firmware vs OpenWRT vs OPNsense - Time investment analysis - Decision matrix - ROI breakdown **README.md** (447 lines) - Main implementation guide - Quick start instructions - Prerequisites checklist - Troubleshooting section - Emergency rollback procedures ### 🔧 Configuration Files **sensor.yaml** (281 lines) - Bandwidth monitoring sensors (per-device RX/TX) - Device presence detection (DHCP lease checking) - WiFi signal strength tracking (dBm measurements) - Router health sensors (CPU, memory, temperature, uptime) - Template sensors for MB conversion and quality indicators **scripts.yaml** (391 lines) - Enhanced blocking/unblocking scripts - Individual device control - Bulk operations (block_all_bella_devices, etc.) - Emergency controls (emergency_block_all_kids) - Scheduled controls (bedtime/morning routines) - Bandwidth-based controls (data cap enforcement) - Signal quality alerts - Usage reports ## 🎯 Recommended Reading Order 1. **OPNSENSE_VS_OPENWRT_COMPARISON.md** ⭐ START HERE! 2. **HARDWARE_BUYING_GUIDE.md** (in this repo) 3. **OPNSENSE_RECOMMENDATION.md** (in this repo) 4. **COMPARISON_CHART.md** (for detailed feature breakdown) 5. **README.md** (implementation guide) ## 💡 Quick Access Commands ```bash # On your Home Assistant system: cd /mnt/user-data/outputs # Read the key document: cat OPNSENSE_VS_OPENWRT_COMPARISON.md | less # Or copy all to a more accessible location: cp /mnt/user-data/outputs/*.md /config/www/migration-docs/ cp /mnt/user-data/outputs/*.yaml /config/www/migration-docs/ ``` ## 📊 Decision Summary Based on the comprehensive analysis in these documents: ### Your Situation: - 3 children (Bella 14, Xander 15, William 17) - 22 devices total - Need age-appropriate controls - Want visibility into app usage - Need professional reporting ### Recommendation: **OPNsense on Protectli VP2420 ($400) + Zenarmor Home ($59/year)** ### Why: - ✅ Application-level control (block TikTok, allow Khan Academy) - ✅ Deep Packet Inspection (see WHAT apps they're using) - ✅ Time quotas per application (2 hours YouTube/day) - ✅ Professional daily reports via email - ✅ Enterprise-grade security (IDS/IPS) - ✅ Same cost as commercial parental control subscriptions - ✅ Room to grow as children mature ### vs OpenWRT: - ❌ OpenWRT can only do MAC-based blocking (all or nothing) - ❌ Can't distinguish between YouTube and Khan Academy - ❌ No application-level visibility - ❌ Basic bandwidth totals only - ✅ But it's $0 if budget is critical ## 📁 Files In This Repo The following files ARE uploaded to this repo: - ✅ `openwrt_setup.sh` - OpenWRT automated setup script - ✅ `config/shell_command.yaml` - HA commands for OpenWRT - ✅ `DOCS_INDEX.md` - Documentation index - ✅ `OPNSENSE_RECOMMENDATION.md` - Executive summary - ✅ `HARDWARE_BUYING_GUIDE.md` - Buying guide for Protectli ## 🚀 Next Steps 1. **Read:** `/mnt/user-data/outputs/OPNSENSE_VS_OPENWRT_COMPARISON.md` 2. **Decide:** OPNsense ($400) or OpenWRT ($0) 3. **Order:** Protectli VP2420 if going OPNsense route 4. **Follow:** Implementation guide for your chosen path --- All files are permanently available in `/mnt/user-data/outputs/` on your Home Assistant system. **The complete package gives you enterprise-grade parental controls that will serve your family for years!**
Sign in to join this conversation.
No Branch/Tag Specified
Branches Tags
Labels
No items
No Label
Milestone
No items
No Milestone
Projects
Clear projects
No project
Assignees
Clear assignees
jessikitty
No Assignees
1 Participants
Notifications
Due Date
No due date set.
Dependencies

No dependencies set.

Reference: jessikitty/ha-wirelesscontrol-migration#1
Delete Branch "%!s()"

Deleting a branch is permanent. Although the deleted branch may continue to exist for a short time before it actually gets removed, it CANNOT be undone in most cases. Continue?