Update Configuration_adv.h
Co-Authored-By: Chris Pepper <24342+p3p@users.noreply.github.com>
This commit is contained in:
InsanityAutomation
+100
-103
@@ -307,11 +307,11 @@
|
||||
#define THERMAL_PROTECTION_PERIOD 40 // (seconds)
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // (°C)
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops
|
||||
#define ADAPTIVE_FAN_SLOWING // Slow down the part-cooling fan if the temperature drops
|
||||
#if ENABLED(ADAPTIVE_FAN_SLOWING)
|
||||
//#define REPORT_ADAPTIVE_FAN_SLOWING // Report fan slowing activity to the console
|
||||
#if ANY(MPCTEMP, PIDTEMP)
|
||||
//#define TEMP_TUNING_MAINTAIN_FAN // Don't slow down the fan speed during M303 or M306 T
|
||||
#define TEMP_TUNING_MAINTAIN_FAN // Don't slow down the fan speed during M303 or M306 T
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -335,7 +335,7 @@
|
||||
* Thermal Protection parameters for the bed are just as above for hotends.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 20 // (seconds)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 90 // (seconds)
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // (°C)
|
||||
|
||||
/**
|
||||
@@ -459,7 +459,7 @@
|
||||
#define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0
|
||||
|
||||
#else
|
||||
#define PID_FAN_SCALING_LIN_FACTOR (0) // Power-loss due to cooling = Kf * (fan_speed)
|
||||
#define PID_FAN_SCALING_LIN_FACTOR (0) // Power loss due to cooling = Kf * (fan_speed)
|
||||
#define DEFAULT_Kf 10 // A constant value added to the PID-tuner
|
||||
#define PID_FAN_SCALING_MIN_SPEED 10 // Minimum fan speed at which to enable PID_FAN_SCALING
|
||||
#endif
|
||||
@@ -547,10 +547,10 @@
|
||||
* Hotend Idle Timeout
|
||||
* Prevent filament in the nozzle from charring and causing a critical jam.
|
||||
*/
|
||||
//#define HOTEND_IDLE_TIMEOUT
|
||||
#define HOTEND_IDLE_TIMEOUT
|
||||
#if ENABLED(HOTEND_IDLE_TIMEOUT)
|
||||
#define HOTEND_IDLE_TIMEOUT_SEC (5*60) // (seconds) Time without extruder movement to trigger protection
|
||||
#define HOTEND_IDLE_MIN_TRIGGER 180 // (°C) Minimum temperature to enable hotend protection
|
||||
#define HOTEND_IDLE_TIMEOUT_SEC (30*60) // (seconds) Time without extruder movement to trigger protection
|
||||
#define HOTEND_IDLE_MIN_TRIGGER 170 // (°C) Minimum temperature to enable hotend protection
|
||||
#define HOTEND_IDLE_NOZZLE_TARGET 0 // (°C) Safe temperature for the nozzle after timeout
|
||||
#define HOTEND_IDLE_BED_TARGET 0 // (°C) Safe temperature for the bed after timeout
|
||||
#endif
|
||||
@@ -602,8 +602,8 @@
|
||||
* gets it spinning reliably for a short time before setting the requested speed.
|
||||
* (Does not work on Sanguinololu with FAN_SOFT_PWM.)
|
||||
*/
|
||||
//#define FAN_KICKSTART_TIME 100 // (ms)
|
||||
//#define FAN_KICKSTART_POWER 180 // 64-255
|
||||
#define FAN_KICKSTART_TIME 100 // (ms)
|
||||
#define FAN_KICKSTART_POWER 180 // 64-255
|
||||
|
||||
// Some coolers may require a non-zero "off" state.
|
||||
//#define FAN_OFF_PWM 1
|
||||
@@ -931,7 +931,7 @@
|
||||
//#define HOMING_BACKOFF_POST_MM { 2, 2, 2 } // (linear=mm, rotational=°) Backoff from endstops after homing
|
||||
//#define XY_COUNTERPART_BACKOFF_MM 0 // (mm) Backoff X after homing Y, and vice-versa
|
||||
|
||||
//#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
#define QUICK_HOME // If G28 contains XY do a diagonal move first
|
||||
//#define HOME_Y_BEFORE_X // If G28 contains XY home Y before X
|
||||
//#define HOME_Z_FIRST // Home Z first. Requires a real endstop (not a probe).
|
||||
//#define CODEPENDENT_XY_HOMING // If X/Y can't home without homing Y/X first
|
||||
@@ -1020,7 +1020,7 @@
|
||||
* Z Steppers Auto-Alignment
|
||||
* Add the G34 command to align multiple Z steppers using a bed probe.
|
||||
*/
|
||||
//#define Z_STEPPER_AUTO_ALIGN
|
||||
#define Z_STEPPER_AUTO_ALIGN
|
||||
#if ENABLED(Z_STEPPER_AUTO_ALIGN)
|
||||
/**
|
||||
* Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
|
||||
@@ -1185,32 +1185,33 @@
|
||||
* Zero Vibration (ZV) Input Shaping for X and/or Y movements.
|
||||
*
|
||||
* This option uses a lot of SRAM for the step buffer. The buffer size is
|
||||
* calculated automatically from SHAPING_FREQ_[XYZ], DEFAULT_AXIS_STEPS_PER_UNIT,
|
||||
* calculated automatically from SHAPING_FREQ_[XY], DEFAULT_AXIS_STEPS_PER_UNIT,
|
||||
* DEFAULT_MAX_FEEDRATE and ADAPTIVE_STEP_SMOOTHING. The default calculation can
|
||||
* be overridden by setting SHAPING_MIN_FREQ and/or SHAPING_MAX_FEEDRATE.
|
||||
* The higher the frequency and the lower the feedrate, the smaller the buffer.
|
||||
* If the buffer is too small at runtime, input shaping will have reduced
|
||||
* effectiveness during high speed movements.
|
||||
*
|
||||
* Tune with M593 D<factor> F<frequency>
|
||||
* Tune with M593 D<factor> F<frequency>:
|
||||
*
|
||||
* D<factor> Set the zeta/damping factor. If axes (X, Y, etc.) are not specified, set for all axes.
|
||||
* F<frequency> Set the frequency. If axes (X, Y, etc.) are not specified, set for all axes.
|
||||
* T[map] Input Shaping type, 0:ZV, 1:EI, 2:2H EI (not implemented yet)
|
||||
* X<1> Set the given parameters only for the X axis.
|
||||
* Y<1> Set the given parameters only for the Y axis.
|
||||
*/
|
||||
//#define INPUT_SHAPING_X
|
||||
//#define INPUT_SHAPING_Y
|
||||
//#define INPUT_SHAPING_Z
|
||||
#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
|
||||
#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
|
||||
#if ENABLED(INPUT_SHAPING_X)
|
||||
#define SHAPING_FREQ_X 40.0 // (Hz) The default dominant resonant frequency on the X axis.
|
||||
#define SHAPING_ZETA_X 0.15 // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
|
||||
#define SHAPING_FREQ_X 40 // (Hz) The default dominant resonant frequency on the X axis.
|
||||
#define SHAPING_ZETA_X 0.15f // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
|
||||
#endif
|
||||
#if ENABLED(INPUT_SHAPING_Y)
|
||||
#define SHAPING_FREQ_Y 40.0 // (Hz) The default dominant resonant frequency on the Y axis.
|
||||
#define SHAPING_ZETA_Y 0.15 // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
|
||||
#define SHAPING_FREQ_Y 40 // (Hz) The default dominant resonant frequency on the Y axis.
|
||||
#define SHAPING_ZETA_Y 0.15f // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
|
||||
#endif
|
||||
#if ENABLED(INPUT_SHAPING_Z)
|
||||
#define SHAPING_FREQ_Z 40.0 // (Hz) The default dominant resonant frequency on the Z axis.
|
||||
#define SHAPING_ZETA_Z 0.15 // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
|
||||
#endif
|
||||
//#define SHAPING_MIN_FREQ 20.0 // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
|
||||
//#define SHAPING_MIN_FREQ 20 // By default the minimum of the shaping frequencies. Override to affect SRAM usage.
|
||||
//#define SHAPING_MAX_STEPRATE 10000 // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
|
||||
//#define SHAPING_MENU // Add a menu to the LCD to set shaping parameters.
|
||||
#endif
|
||||
@@ -1269,18 +1270,18 @@
|
||||
* XY Frequency limit
|
||||
* Reduce resonance by limiting the frequency of small zigzag infill moves.
|
||||
* See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
|
||||
* Use M201 F<freq> S<min%> to change limits at runtime.
|
||||
* Use M201 F<freq> G<min%> to change limits at runtime.
|
||||
*/
|
||||
//#define XY_FREQUENCY_LIMIT 10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
|
||||
#ifdef XY_FREQUENCY_LIMIT
|
||||
#define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 S<min%>.
|
||||
#define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 G<min%>.
|
||||
#endif
|
||||
|
||||
//
|
||||
// Backlash Compensation
|
||||
// Adds extra movement to axes on direction-changes to account for backlash.
|
||||
//
|
||||
//#define BACKLASH_COMPENSATION
|
||||
#define BACKLASH_COMPENSATION
|
||||
#if ENABLED(BACKLASH_COMPENSATION)
|
||||
// Define values for backlash distance and correction.
|
||||
// If BACKLASH_GCODE is enabled these values are the defaults.
|
||||
@@ -1295,7 +1296,7 @@
|
||||
//#define BACKLASH_SMOOTHING_MM 3 // (mm)
|
||||
|
||||
// Add runtime configuration and tuning of backlash values (M425)
|
||||
//#define BACKLASH_GCODE
|
||||
#define BACKLASH_GCODE
|
||||
|
||||
#if ENABLED(BACKLASH_GCODE)
|
||||
// Measure the Z backlash when probing (G29) and set with "M425 Z"
|
||||
@@ -1341,7 +1342,7 @@
|
||||
#define CALIBRATION_NOZZLE_TIP_HEIGHT 1.0 // mm
|
||||
#define CALIBRATION_NOZZLE_OUTER_DIAMETER 2.0 // mm
|
||||
|
||||
// Uncomment to enable reporting (required for "G425 V", but consumes flash).
|
||||
// Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
|
||||
//#define CALIBRATION_REPORTING
|
||||
|
||||
// The true location and dimension the cube/bolt/washer on the bed.
|
||||
@@ -1473,7 +1474,6 @@
|
||||
#if IS_ULTIPANEL
|
||||
#define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
|
||||
#define ULTIPANEL_FEEDMULTIPLY // Encoder sets the feedrate multiplier on the Status Screen
|
||||
//#define ULTIPANEL_FLOWPERCENT // Encoder sets the flow percentage on the Status Screen
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -1528,7 +1528,7 @@
|
||||
#endif
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#define LCD_INFO_MENU
|
||||
#if ENABLED(LCD_INFO_MENU)
|
||||
//#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
|
||||
#endif
|
||||
@@ -1539,7 +1539,6 @@
|
||||
* Axis moves <= 1/2 the axis length and Extruder moves <= EXTRUDE_MAXLENGTH
|
||||
* will be shown in the move submenus.
|
||||
*/
|
||||
|
||||
#define MANUAL_MOVE_DISTANCE_MM 10, 1.0, 0.1 // (mm)
|
||||
//#define MANUAL_MOVE_DISTANCE_MM 100, 50, 10, 1.0, 0.1 // (mm)
|
||||
//#define MANUAL_MOVE_DISTANCE_MM 500, 100, 50, 10, 1.0, 0.1 // (mm)
|
||||
@@ -1581,9 +1580,9 @@
|
||||
#define BOOT_MARLIN_LOGO_SMALL // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
|
||||
#endif
|
||||
#if HAS_MARLINUI_U8GLIB
|
||||
//#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
|
||||
#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
|
||||
#endif
|
||||
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE, HAS_MARLINUI_HD44780)
|
||||
#if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN // Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
#endif
|
||||
#endif
|
||||
@@ -1600,10 +1599,10 @@
|
||||
#endif
|
||||
|
||||
// The timeout to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000 // (ms)
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// Apply a timeout to low-priority status messages
|
||||
//#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
|
||||
@@ -1655,7 +1654,7 @@
|
||||
#endif
|
||||
|
||||
// Add 'M73' to set print job progress, overrides Marlin's built-in estimate
|
||||
//#define SET_PROGRESS_MANUALLY
|
||||
#define SET_PROGRESS_MANUALLY
|
||||
#if ENABLED(SET_PROGRESS_MANUALLY)
|
||||
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done
|
||||
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time
|
||||
@@ -1744,26 +1743,21 @@
|
||||
*/
|
||||
//#define POWER_LOSS_RECOVERY
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
#define PLR_ENABLED_DEFAULT false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
|
||||
//#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable)
|
||||
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default.
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power-loss
|
||||
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
|
||||
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
|
||||
//#define POWER_LOSS_PIN 44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
|
||||
//#define POWER_LOSS_STATE HIGH // State of pin indicating power loss
|
||||
//#define POWER_LOSS_PULLUP // Set pullup / pulldown as appropriate for your sensor
|
||||
//#define POWER_LOSS_PULLDOWN
|
||||
|
||||
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power-loss with UPS)
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
//#define POWER_LOSS_PURGE_LEN 20 // (mm) Length of filament to purge on resume
|
||||
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
|
||||
|
||||
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
|
||||
// especially with "vase mode" printing. Set too high and vases cannot be continued.
|
||||
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
|
||||
|
||||
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power-loss
|
||||
#if ENABLED(BACKUP_POWER_SUPPLY)
|
||||
//#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail
|
||||
#endif
|
||||
|
||||
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
|
||||
//#define POWER_LOSS_RECOVER_ZHOME
|
||||
#if ENABLED(POWER_LOSS_RECOVER_ZHOME)
|
||||
@@ -1812,13 +1806,13 @@
|
||||
|
||||
// Allow international symbols in long filenames. To display correctly, the
|
||||
// LCD's font must contain the characters. Check your selected LCD language.
|
||||
//#define UTF_FILENAME_SUPPORT
|
||||
#define UTF_FILENAME_SUPPORT
|
||||
|
||||
//#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
|
||||
#define LONG_FILENAME_HOST_SUPPORT // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
|
||||
//#define LONG_FILENAME_WRITE_SUPPORT // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
|
||||
//#define M20_TIMESTAMP_SUPPORT // Include timestamps by adding the 'T' flag to M20 commands
|
||||
|
||||
//#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
#define SCROLL_LONG_FILENAMES // Scroll long filenames in the SD card menu
|
||||
|
||||
//#define SD_ABORT_NO_COOLDOWN // Leave the heaters on after Stop Print (not recommended!)
|
||||
|
||||
@@ -1969,6 +1963,17 @@
|
||||
// Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
|
||||
//#define USE_SMALL_INFOFONT
|
||||
|
||||
/**
|
||||
* Graphical Display Sleep
|
||||
*
|
||||
* The U8G library provides sleep / wake functions for SH1106, SSD1306,
|
||||
* SSD1309, and some other DOGM displays.
|
||||
* Enable this option to save energy and prevent OLED pixel burn-in.
|
||||
* Adds the menu item Configuration > LCD Timeout (m) to set a wait period
|
||||
* from 0 (disabled) to 99 minutes.
|
||||
*/
|
||||
//#define DISPLAY_SLEEP_MINUTES 2 // (minutes) Timeout before turning off the screen. Set with M255 S.
|
||||
|
||||
/**
|
||||
* ST7920-based LCDs can emulate a 16 x 4 character display using
|
||||
* the ST7920 character-generator for very fast screen updates.
|
||||
@@ -2217,20 +2222,13 @@
|
||||
//#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Display Sleep
|
||||
* Enable this option to save energy and prevent OLED pixel burn-in.
|
||||
*/
|
||||
//#define DISPLAY_SLEEP_MINUTES 2 // (minutes) Timeout before turning off the screen
|
||||
|
||||
/**
|
||||
* LCD Backlight Timeout
|
||||
* Requires a display with a controllable backlight
|
||||
*/
|
||||
//
|
||||
// LCD Backlight Timeout
|
||||
// Requires a display with a controllable backlight
|
||||
//
|
||||
//#define LCD_BACKLIGHT_TIMEOUT_MINS 1 // (minutes) Timeout before turning off the backlight
|
||||
|
||||
#if defined(DISPLAY_SLEEP_MINUTES) || defined(LCD_BACKLIGHT_TIMEOUT_MINS)
|
||||
#define EDITABLE_DISPLAY_TIMEOUT // Edit sleep / backlight timeout with M255 S<minutes> and a menu item
|
||||
#define EDITABLE_DISPLAY_TIMEOUT // Edit timeout with M255 S<minutes> and a menu item
|
||||
#endif
|
||||
|
||||
//
|
||||
@@ -2265,18 +2263,18 @@
|
||||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define EP_BABYSTEPPING // M293/M294 babystepping with EMERGENCY_PARSER support
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement)
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
//#define BABYSTEP_INVERT_Z // Enable if Z babysteps should go the other way
|
||||
//#define BABYSTEP_MILLIMETER_UNITS // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 25 // (steps or mm) Steps or millimeter distance for each Z babystep
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1 // (steps or mm) Steps or millimeter distance for each XY babystep
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
@@ -2288,10 +2286,10 @@
|
||||
|
||||
//#define BABYSTEP_DISPLAY_TOTAL // Display total babysteps since last G28
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -2312,7 +2310,7 @@
|
||||
*
|
||||
* See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
|
||||
*/
|
||||
//#define LIN_ADVANCE
|
||||
#define LIN_ADVANCE
|
||||
#if ENABLED(LIN_ADVANCE)
|
||||
#if ENABLED(DISTINCT_E_FACTORS)
|
||||
#define ADVANCE_K { 0.22 } // (mm) Compression length per 1mm/s extruder speed, per extruder
|
||||
@@ -2321,6 +2319,7 @@
|
||||
#endif
|
||||
//#define ADVANCE_K_EXTRA // Add a second linear advance constant, configurable with M900 L.
|
||||
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
|
||||
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
|
||||
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
|
||||
#endif
|
||||
|
||||
@@ -2505,7 +2504,7 @@
|
||||
#endif
|
||||
|
||||
// G5 Bézier Curve Support with XYZE destination and IJPQ offsets
|
||||
//#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
#define BEZIER_CURVE_SUPPORT // Requires ~2666 bytes
|
||||
|
||||
#if ANY(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
|
||||
//#define CNC_WORKSPACE_PLANES // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
|
||||
@@ -2597,16 +2596,16 @@
|
||||
#if ALL(HAS_MEDIA, DIRECT_STEPPING)
|
||||
#define BLOCK_BUFFER_SIZE 8
|
||||
#elif HAS_MEDIA
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#define BLOCK_BUFFER_SIZE 32
|
||||
#else
|
||||
#define BLOCK_BUFFER_SIZE 16
|
||||
#define BLOCK_BUFFER_SIZE 32
|
||||
#endif
|
||||
|
||||
// @section serial
|
||||
|
||||
// The ASCII buffer for serial input
|
||||
#define MAX_CMD_SIZE 96
|
||||
#define BUFSIZE 4
|
||||
#define BUFSIZE 16
|
||||
|
||||
// Transmission to Host Buffer Size
|
||||
// To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
|
||||
@@ -2653,7 +2652,7 @@
|
||||
* Currently handles M108, M112, M410, M876
|
||||
* NOTE: Not yet implemented for all platforms.
|
||||
*/
|
||||
//#define EMERGENCY_PARSER
|
||||
#define EMERGENCY_PARSER
|
||||
|
||||
/**
|
||||
* Realtime Reporting (requires EMERGENCY_PARSER)
|
||||
@@ -2684,7 +2683,7 @@
|
||||
//#define NO_TIMEOUTS 1000 // (ms)
|
||||
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
@@ -2697,7 +2696,7 @@
|
||||
* This feature is EXPERIMENTAL so use with caution and test thoroughly.
|
||||
* Enable this option to receive data on the serial ports via the onboard DMA
|
||||
* controller for more stable and reliable high-speed serial communication.
|
||||
* Support is currently limited to some STM32 MCUs and all HC32 MCUs.
|
||||
* Only some STM32 MCUs are currently supported.
|
||||
* Note: This has no effect on emulated USB serial ports.
|
||||
*/
|
||||
//#define SERIAL_DMA
|
||||
@@ -2886,7 +2885,7 @@
|
||||
*
|
||||
* Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
@@ -2926,11 +2925,11 @@
|
||||
//#define FILAMENT_CHANGE_RESUME_ON_INSERT // Automatically continue / load filament when runout sensor is triggered again.
|
||||
//#define PAUSE_REHEAT_FAST_RESUME // Reduce number of waits by not prompting again post-timeout before continuing.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // If needed, home before parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define CONFIGURE_FILAMENT_CHANGE // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
|
||||
#endif
|
||||
|
||||
@@ -2952,12 +2951,15 @@
|
||||
* Some boards have simple jumper connections! See your board's documentation.
|
||||
* - These drivers can also be used with Hardware Serial.
|
||||
*
|
||||
* The TMC26XStepper library is required for TMC26X stepper drivers.
|
||||
* https://github.com/MarlinFirmware/TMC26XStepper
|
||||
*
|
||||
* The TMCStepper library is required for other TMC stepper drivers.
|
||||
* https://github.com/teemuatlut/TMCStepper
|
||||
*
|
||||
* @section tmc/config
|
||||
*/
|
||||
#if HAS_TRINAMIC_CONFIG
|
||||
#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
|
||||
|
||||
#define HOLD_MULTIPLIER 0.5 // Scales down the holding current from run current
|
||||
|
||||
@@ -2971,7 +2973,7 @@
|
||||
#define X_CURRENT 800 // (mA) RMS current. Multiply by 1.414 for peak current.
|
||||
#define X_CURRENT_HOME X_CURRENT // (mA) RMS current for sensorless homing
|
||||
#define X_MICROSTEPS 16 // 0..256
|
||||
#define X_RSENSE 0.11
|
||||
#define X_RSENSE 0.11 // Multiplied x1000 for TMC26X
|
||||
#define X_CHAIN_POS -1 // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
|
||||
//#define X_INTERPOLATE true // Enable to override 'INTERPOLATE' for the X axis
|
||||
//#define X_HOLD_MULTIPLIER 0.5 // Enable to override 'HOLD_MULTIPLIER' for the X axis
|
||||
@@ -3108,7 +3110,7 @@
|
||||
#endif
|
||||
|
||||
#if AXIS_IS_TMC_CONFIG(E0)
|
||||
#define E0_CURRENT 800
|
||||
#define E0_CURRENT 900
|
||||
#define E0_MICROSTEPS 16
|
||||
#define E0_RSENSE 0.11
|
||||
#define E0_CHAIN_POS -1
|
||||
@@ -3281,7 +3283,7 @@
|
||||
#define STEALTHCHOP_U
|
||||
#define STEALTHCHOP_V
|
||||
#define STEALTHCHOP_W
|
||||
#define STEALTHCHOP_E
|
||||
//#define STEALTHCHOP_E
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -3299,7 +3301,7 @@
|
||||
* Define your own with:
|
||||
* { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
|
||||
*/
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_12V // All axes (override below)
|
||||
#define CHOPPER_TIMING CHOPPER_DEFAULT_24V // All axes (override below)
|
||||
//#define CHOPPER_TIMING_X CHOPPER_TIMING // For X Axes (override below)
|
||||
//#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
|
||||
//#define CHOPPER_TIMING_Y CHOPPER_TIMING // For Y Axes (override below)
|
||||
@@ -3443,7 +3445,7 @@
|
||||
/**
|
||||
* Step on both rising and falling edge signals (as with a square wave).
|
||||
*/
|
||||
//#define EDGE_STEPPING
|
||||
#define EDGE_STEPPING
|
||||
|
||||
/**
|
||||
* Enable M122 debugging command for TMC stepper drivers.
|
||||
@@ -3464,7 +3466,7 @@
|
||||
*/
|
||||
#define TMC_ADV() { }
|
||||
|
||||
#endif // HAS_TRINAMIC_CONFIG
|
||||
#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
|
||||
|
||||
// @section i2cbus
|
||||
|
||||
@@ -3557,7 +3559,7 @@
|
||||
* Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
|
||||
* to set spindle speed, spindle direction, and laser power.
|
||||
*
|
||||
* SuperPID is a router/spindle speed controller used in the CNC milling community.
|
||||
* SuperPid is a router/spindle speed controller used in the CNC milling community.
|
||||
* Marlin can be used to turn the spindle on and off. It can also be used to set
|
||||
* the spindle speed from 5,000 to 30,000 RPM.
|
||||
*
|
||||
@@ -4112,14 +4114,14 @@
|
||||
* Host Prompt Support enables Marlin to use the host for user prompts so
|
||||
* filament runout and other processes can be managed from the host side.
|
||||
*/
|
||||
//#define HOST_ACTION_COMMANDS
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
//#define HOST_PAUSE_M76 // Tell the host to pause in response to M76
|
||||
//#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#define HOST_PROMPT_SUPPORT // Initiate host prompts to get user feedback
|
||||
#if ENABLED(HOST_PROMPT_SUPPORT)
|
||||
//#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
#define HOST_STATUS_NOTIFICATIONS // Send some status messages to the host as notifications
|
||||
#endif
|
||||
//#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
|
||||
#define HOST_START_MENU_ITEM // Add a menu item that tells the host to start
|
||||
//#define HOST_SHUTDOWN_MENU_ITEM // Add a menu item that tells the host to shut down
|
||||
#endif
|
||||
|
||||
@@ -4260,8 +4262,7 @@
|
||||
|
||||
/**
|
||||
* Instant freeze / unfreeze functionality
|
||||
* Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
|
||||
* Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
|
||||
* Potentially useful for emergency stop that allows being resumed.
|
||||
* @section interface
|
||||
*/
|
||||
//#define FREEZE_FEATURE
|
||||
@@ -4308,7 +4309,6 @@
|
||||
// See class CodeProfiler.
|
||||
//#define MAX7219_DEBUG_MULTISTEPPING 6 // Show multi-stepping 1 to 128 on this LED matrix row.
|
||||
//#define MAX7219_DEBUG_SLOWDOWN 6 // Count (mod 16) how many times SLOWDOWN has reduced print speed.
|
||||
//#define MAX7219_REINIT_ON_POWERUP // Re-initialize MAX7129 when power supply turns on
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -4342,7 +4342,7 @@
|
||||
* Extras for an ESP32-based motherboard with WIFISUPPORT
|
||||
* These options don't apply to add-on WiFi modules based on ESP32 WiFi101.
|
||||
*/
|
||||
#if ANY(WIFISUPPORT, ESP3D_WIFISUPPORT)
|
||||
#if ENABLED(WIFISUPPORT)
|
||||
//#define WEBSUPPORT // Start a webserver (which may include auto-discovery) using SPIFFS
|
||||
//#define OTASUPPORT // Support over-the-air firmware updates
|
||||
//#define WIFI_CUSTOM_COMMAND // Accept feature config commands (e.g., WiFi ESP3D) from the host
|
||||
@@ -4489,12 +4489,12 @@
|
||||
//
|
||||
// M42 - Set pin states
|
||||
//
|
||||
//#define DIRECT_PIN_CONTROL
|
||||
#define DIRECT_PIN_CONTROL
|
||||
|
||||
//
|
||||
// M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
|
||||
//
|
||||
//#define PINS_DEBUGGING
|
||||
#define PINS_DEBUGGING
|
||||
|
||||
// Enable Tests that will run at startup and produce a report
|
||||
//#define MARLIN_TEST_BUILD
|
||||
@@ -4525,6 +4525,3 @@
|
||||
|
||||
// Report uncleaned reset reason from register r2 instead of MCUSR. Supported by Optiboot on AVR.
|
||||
//#define OPTIBOOT_RESET_REASON
|
||||
|
||||
// Shrink the build for smaller boards by sacrificing some serial feedback
|
||||
//#define MARLIN_SMALL_BUILD
|
||||
|
||||
Reference in New Issue
Block a user