jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Bump to head with BLTouch V3 support

Browse Source
This commit is contained in:
InsanityAutomation
2019-03-21 22:13:24 -04:00
parent 092fb5dc09
commit 0b3d8553ab
215 changed files with 372609 additions and 89 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+26 -22
View File
@@ -26,11 +26,11 @@
//#define X_2208
//#define X_Spreadcycle
#define X_S109
//#define X_S109
//#define Y_2208 // Highly recommended as large prints with high mass can cause layer shifts with stealthchop at high speed
//#define Y_Spreadcycle
//#define Y_4988 // Some machines shipped with 4988 drivers across the board. Set this if you arent sure what you have and all the drivers look identical
#define Y_S109
//#define Y_S109
//#define Z_2208 // NOT Recommended! Dual stepper current draw is above the recommended limit for this driver
//#define Z_4988 // Some machines shipped with 4988 drivers across the board. Set this if you arent sure what you have and all the drivers look identical
//#define Y_Spreadcycle
@@ -442,6 +442,7 @@
#define TEMP_SENSOR_BED 0
#endif
#define TEMP_SENSOR_CHAMBER 0
#define CHAMBER_HEATER_PIN -1 // On/off pin for enclosure heating system
// Dummy thermistor constant temperature readings, for use with 998 and 999
#define DUMMY_THERMISTOR_998_VALUE 25
@@ -880,11 +881,11 @@
#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
/**
* Z_MIN_PROBE_ENDSTOP
* Z_MIN_PROBE_PIN
*
* Enable this option for a probe connected to any pin except Z-Min.
* (By default Marlin assumes the Z-Max endstop pin.)
* To use a custom Z Probe pin, set Z_MIN_PROBE_PIN below.
* Define this pin if the probe is not connected to Z_MIN_PIN.
* If not defined the default pin for the selected MOTHERBOARD
* will be used. Most of the time the default is what you want.
*
* - The simplest option is to use a free endstop connector.
* - Use 5V for powered (usually inductive) sensors.
@@ -894,11 +895,8 @@
* - normally-closed switches to GND and D32.
* - normally-open switches to 5V and D32.
*
* WARNING: Setting the wrong pin may have unexpected and potentially
* disastrous consequences. Use with caution and do your homework.
*
*/
//#define Z_MIN_PROBE_ENDSTOP
//#define Z_MIN_PROBE_PIN 32 // Pin 32 is the RAMPS default
/**
* Probe Type
@@ -933,6 +931,13 @@
#define BLTOUCH
#if ENABLED(BLTOUCH)
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
// BLTouch V3.0 and newer smart series
#define BLTOUCH_V3
#if ENABLED(BLTOUCH_V3)
#define BLTOUCH_FORCE_5V_MODE
//#define BLTOUCH_FORCE_OPEN_DRAIN_MODE
#endif
#endif
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
@@ -1262,7 +1267,7 @@
*/
//#define DEBUG_LEVELING_FEATURE
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_BILINEAR) || ENABLED(AUTO_BED_LEVELING_UBL)
#if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
// Gradually reduce leveling correction until a set height is reached,
// at which point movement will be level to the machine's XY plane.
// The height can be set with M420 Z<height>
@@ -1281,13 +1286,14 @@
#if ENABLED(G26_MESH_VALIDATION)
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_HOTEND_TEMP 205 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
#define MESH_TEST_BED_TEMP 60 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
#define G26_XY_FEEDRATE 20 // (mm/s) Feedrate for XY Moves for the G26 Mesh Validation Tool.
#endif
#endif
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
#if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
// Set the number of grid points per dimension.
#define GRID_MAX_POINTS_X 3
@@ -1356,7 +1362,7 @@
* Points to probe for all 3-point Leveling procedures.
* Override if the automatically selected points are inadequate.
*/
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
#if EITHER(AUTO_BED_LEVELING_3POINT, AUTO_BED_LEVELING_UBL)
#define PROBE_PT_1_X 40
#define PROBE_PT_1_Y 365
#define PROBE_PT_2_X 40
@@ -1382,7 +1388,9 @@
#if ENABLED(LEVEL_BED_CORNERS)
#define LEVEL_CORNERS_INSET 30 // (mm) An inset for corner leveling
#define LEVEL_CENTER_TOO // Move to the center after the last corner
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Move nozzle up before moving between corners
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
#endif
/**
@@ -2149,10 +2157,6 @@
// then the BLUE led is on. Otherwise the RED led is on. (1C hysteresis)
//#define TEMP_STAT_LEDS
// M240 Triggers a camera by emulating a Canon RC-1 Remote
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
//#define PHOTOGRAPH_PIN 23
// SkeinForge sends the wrong arc g-codes when using Arc Point as fillet procedure
//#define SF_ARC_FIX
@@ -2194,7 +2198,7 @@
//#define RGB_LED
//#define RGBW_LED
#if ENABLED(RGB_LED) || ENABLED(RGBW_LED)
#if EITHER(RGB_LED, RGBW_LED)
#define RGB_LED_R_PIN 34
#define RGB_LED_G_PIN 43
#define RGB_LED_B_PIN 35
@@ -2223,7 +2227,7 @@
* - Change to green once print has finished
* - Turn off after the print has finished and the user has pushed a button
*/
#if ENABLED(BLINKM) || ENABLED(RGB_LED) || ENABLED(RGBW_LED) || ENABLED(PCA9632) || ENABLED(PCA9533)|| ENABLED(NEOPIXEL_LED)
#if ANY(BLINKM, RGB_LED, RGBW_LED, PCA9632, PCA9533, NEOPIXEL_LED)
#define PRINTER_EVENT_LEDS
#endif
Marlin/Configuration_adv.h
+127 -66
View File
@@ -78,7 +78,7 @@
#define THERMAL_PROTECTION_HYSTERESIS 10 // Degrees Celsius
#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
#if ENABLED(ADAPTIVE_FAN_SLOWING) && ENABLED(PIDTEMP)
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
#endif
@@ -112,6 +112,20 @@
#define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
#endif
/**
* Thermal Protection parameters for the heated chamber.
*/
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
#define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds
#define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
/**
* Heated chamber watch settings (M141/M191).
*/
#define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
#endif
#if ENABLED(PIDTEMP)
// this adds an experimental additional term to the heating power, proportional to the extrusion speed.
// if Kc is chosen well, the additional required power due to increased melting should be compensated.
@@ -224,8 +238,35 @@
*
* Define one or both of these to override the default 0-255 range.
*/
#define FAN_MIN_PWM 0
#define FAN_MAX_PWM 255
//#define FAN_MIN_PWM 50
//#define FAN_MAX_PWM 128
/**
* FAST PWM FAN Settings
*
* Use to change the FAST FAN PWM frequency (if enabled in Configuration.h)
* Combinations of PWM Modes, prescale values and TOP resolutions are used internally to produce a
* frequency as close as possible to the desired frequency.
*
* FAST_PWM_FAN_FREQUENCY [undefined by default]
* Set this to your desired frequency.
* If left undefined this defaults to F = F_CPU/(2*255*1)
* ie F = 31.4 Khz on 16 MHz microcontrollers or F = 39.2 KHz on 20 MHz microcontrollers
* These defaults are the same as with the old FAST_PWM_FAN implementation - no migration is required
* NOTE: Setting very low frequencies (< 10 Hz) may result in unexpected timer behaviour.
*
* USE_OCR2A_AS_TOP [undefined by default]
* Boards that use TIMER2 for PWM have limitations resulting in only a few possible frequencies on TIMER2:
* 16MHz MCUs: [62.5KHz, 31.4KHz (default), 7.8KHz, 3.92KHz, 1.95KHz, 977Hz, 488Hz, 244Hz, 60Hz, 122Hz, 30Hz]
* 20MHz MCUs: [78.1KHz, 39.2KHz (default), 9.77KHz, 4.9KHz, 2.44KHz, 1.22KHz, 610Hz, 305Hz, 153Hz, 76Hz, 38Hz]
* A greater range can be achieved by enabling USE_OCR2A_AS_TOP. But note that this option blocks the use of
* PWM on pin OC2A. Only use this option if you don't need PWM on 0C2A. (Check your schematic.)
* USE_OCR2A_AS_TOP sacrifices duty cycle control resolution to achieve this broader range of frequencies.
*/
#if ENABLED(FAST_PWM_FAN)
//#define FAST_PWM_FAN_FREQUENCY 31400
//#define USE_OCR2A_AS_TOP
#endif
// @section extruder
@@ -371,42 +412,41 @@
* The inactive carriage is parked automatically to prevent oozing.
* X1 is the left carriage, X2 the right. They park and home at opposite ends of the X axis.
* By default the X2 stepper is assigned to the first unused E plug on the board.
*
* The following Dual X Carriage modes can be selected with M605 S<mode>:
*
* 0 : (FULL_CONTROL) The slicer has full control over both X-carriages and can achieve optimal travel
* results as long as it supports dual X-carriages. (M605 S0)
*
* 1 : (AUTO_PARK) The firmware automatically parks and unparks the X-carriages on tool-change so
* that additional slicer support is not required. (M605 S1)
*
* 2 : (DUPLICATION) The firmware moves the second X-carriage and extruder in synchronization with
* the first X-carriage and extruder, to print 2 copies of the same object at the same time.
* Set the constant X-offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S2 to initiate duplicated movement.
*
* 3 : (MIRRORED) Formbot/Vivedino-inspired mirrored mode in which the second extruder duplicates
* the movement of the first except the second extruder is reversed in the X axis.
* Set the initial X offset and temperature differential with M605 S2 X[offs] R[deg] and
* follow with M605 S3 to initiate mirrored movement.
*/
#define DUAL_X_CARRIAGE
#if ENABLED(DUAL_X_CARRIAGE)
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
// set maximum to the distance between toolheads when both heads are homed
#define X1_MIN_POS X_MIN_POS // Set to X_MIN_POS
#define X1_MAX_POS X_BED_SIZE // Set a maximum so the first X-carriage can't hit the parked second X-carriage
#define X2_MIN_POS 80 // Set a minimum to ensure the second X-carriage can't hit the parked first X-carriage
#if ENABLED(TREX3)
#define X2_MAX_POS 446
#define X2_MAX_POS 446 // Set this to the distance between toolheads when both heads are homed
#else
#define X2_MAX_POS 442
#define X2_MAX_POS 442 // Set this to the distance between toolheads when both heads are homed
#endif
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
// Remember: you should set the second extruder x-offset to 0 in your slicer.
/**
* There are a few selectable movement modes for dual x-carriages using M605 S<mode>
*
* Mode 0 (DXC_FULL_CONTROL_MODE): Full control. The slicer has full control over both x-carriages and can achieve optimal travel results
* as long as it supports dual x-carriages. (M605 S0)
*
* Mode 1 (DXC_AUTO_PARK_MODE) : Auto-park mode. The firmware will automatically park and unpark the x-carriages on tool changes so
* that additional slicer support is not required. (M605 S1)
*
* Mode 2 (DXC_DUPLICATION_MODE) : Duplication mode. The firmware will transparently make the second x-carriage and extruder copy all
* actions of the first x-carriage. This allows the printer to print 2 arbitrary items at
* once. (2nd extruder x offset and temp offset are set using: M605 S2 [Xnnn] [Rmmm])
*
* Mode 3 (DXC_MIRRORED_MODE) : Enable the Formbot/Vivedino inspired Mirrored mode. The second extruder will duplicate the first extruder's
* movement similar to DXC_DUPLICATION_MODE. However, the second extruder will be producing
* a mirror image of the first extruder. The initial x-offset and temperature differential are
* set with M605 S2 [Xnnn] [Rmmm] and then followed with a M605 S3 to start the mirrored movement.
*/
#define X2_HOME_DIR 1 // Set to 1. The second X-carriage always homes to the maximum endstop position
#define X2_HOME_POS X2_MAX_POS // Default X2 home position. Set to X2_MAX_POS.
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
// without modifying the firmware (through the "M218 T1 X???" command).
// Remember: you should set the second extruder x-offset to 0 in your slicer.
// This is the default power-up mode which can be later using M605.
#define DEFAULT_DUAL_X_CARRIAGE_MODE DXC_AUTO_PARK_MODE
@@ -460,8 +500,8 @@
#define AXIS_RELATIVE_MODES {false, false, false, false}
// Allow duplication mode with a basic dual-nozzle extruder
//#define DUAL_NOZZLE_DUPLICATION_MODE
// Add a Duplicate option for well-separated conjoined nozzles
//#define MULTI_NOZZLE_DUPLICATION
// By default pololu step drivers require an active high signal. However, some high power drivers require an active low signal as step.
#define INVERT_X_STEP_PIN false
@@ -485,8 +525,11 @@
// @section lcd
#if ENABLED(ULTIPANEL)
#if EITHER(ULTIPANEL, EXTENSIBLE_UI)
#define MANUAL_FEEDRATE {50*60, 50*60, 4*60, 60} // Feedrates for manual moves along X, Y, Z, E from panel
#endif
#if ENABLED(ULTIPANEL)
#define MANUAL_E_MOVES_RELATIVE // Show LCD extruder moves as relative rather than absolute positions
#define ULTIPANEL_FEEDMULTIPLY // Comment to disable setting feedrate multiplier via encoder
#endif
@@ -698,7 +741,7 @@
// Add an 'M73' G-code to set the current percentage
#define LCD_SET_PROGRESS_MANUALLY
#if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
#if ENABLED(LCD_PROGRESS_BAR)
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
@@ -707,7 +750,7 @@
//#define PROGRESS_MSG_ONCE // Show the message for MSG_TIME then clear it
//#define LCD_PROGRESS_BAR_TEST // Add a menu item to test the progress bar
#endif
#endif // SDSUPPORT || LCD_SET_PROGRESS_MANUALLY
#endif
/**
* LED Control Menu
@@ -857,7 +900,7 @@
#endif
// Add an optimized binary file transfer mode, initiated with 'M28 B1'
//#define FAST_FILE_TRANSFER
//#define BINARY_FILE_TRANSFER
#endif // SDSUPPORT
@@ -958,6 +1001,7 @@
*/
#define BABYSTEPPING
#if ENABLED(BABYSTEPPING)
//#define BABYSTEP_WITHOUT_HOMING
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
#define BABYSTEP_MULTIPLICATOR 20 // Babysteps are very small. Increase for faster motion.
@@ -966,11 +1010,11 @@
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
// Note: Extra time may be added to mitigate controller latency.
#endif
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
#if ENABLED(MOVE_Z_WHEN_IDLE)
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
#endif
#endif
#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
@@ -1002,13 +1046,13 @@
#define LIN_ADVANCE
#endif
#if ENABLED(LIN_ADVANCE)
#define LIN_ADVANCE_K 0.07 // Unit: mm compression per 1mm/s extruder speed
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // If enabled, this will generate debug information output over USB.
#endif
// @section leveling
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
#if EITHER(MESH_BED_LEVELING, AUTO_BED_LEVELING_UBL)
// Override the mesh area if the automatic (max) area is too large
#if( (X_PROBE_OFFSET_FROM_EXTRUDER + (MIN_PROBE_EDGE + MESH_INSET)) > 0 )
#define MESH_MIN_X (X_PROBE_OFFSET_FROM_EXTRUDER + MIN_PROBE_EDGE + MESH_INSET)
@@ -1069,11 +1113,17 @@
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
#define BEZIER_CURVE_SUPPORT
// G38.2 and G38.3 Probe Target
// Set MULTIPLE_PROBING if you want G38 to double touch
/**
* G38 Probe Target
*
* This option adds G38.2 and G38.3 (probe towards target)
* and optionally G38.4 and G38.5 (probe away from target).
* Set MULTIPLE_PROBING for G38 to probe more than once.
*/
//#define G38_PROBE_TARGET
#if ENABLED(G38_PROBE_TARGET)
#define G38_MINIMUM_MOVE 0.0275 // minimum distance in mm that will produce a move (determined using the print statement in check_move)
//#define G38_PROBE_AWAY // Include G38.4 and G38.5 to probe away from target
#define G38_MINIMUM_MOVE 0.0275 // (mm) Minimum distance that will produce a move.
#endif
// Moves (or segments) with fewer steps than this will be joined with the next move
@@ -1583,7 +1633,7 @@
* M906 - Set or get motor current in milliamps using axis codes X, Y, Z, E. Report values if no axis codes given.
* M911 - Report stepper driver overtemperature pre-warn condition.
* M912 - Clear stepper driver overtemperature pre-warn condition flag.
* M122 S0/1 - Report driver parameters (Requires TMC_DEBUG)
* M122 - Report driver parameters (Requires TMC_DEBUG)
*/
//#define MONITOR_DRIVER_STATUS
@@ -1639,7 +1689,7 @@
*/
//#define SENSORLESS_PROBING // TMC2130 only
#if ENABLED(SENSORLESS_HOMING) || ENABLED(SENSORLESS_PROBING)
#if EITHER(SENSORLESS_HOMING, SENSORLESS_PROBING)
#define X_STALL_SENSITIVITY 8
#define Y_STALL_SENSITIVITY 8
//#define Z_STALL_SENSITIVITY 8
@@ -1851,12 +1901,30 @@
// @section extras
/**
* Canon Hack Development Kit
* http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
* Photo G-code
* Add the M240 G-code to take a photo.
* The photo can be triggered by a digital pin or a physical movement.
*/
//#define CHDK_PIN 4 // Set and enable a pin for triggering CHDK to take a picture
#if PIN_EXISTS(CHDK)
#define CHDK_DELAY 50 // (ms) How long the pin should remain HIGH
//#define PHOTO_GCODE
#if ENABLED(PHOTO_GCODE)
// A position to move to (and raise Z) before taking the photo
//#define PHOTO_POSITION { X_MAX_POS - 5, Y_MAX_POS, 0 } // { xpos, ypos, zraise } (M240 X Y Z)
//#define PHOTO_DELAY_MS 100 // (ms) Duration to pause before moving back (M240 P)
//#define PHOTO_RETRACT_MM 6.5 // (mm) E retract/recover for the photo move (M240 R S)
// Canon RC-1 or homebrew digital camera trigger
// Data from: http://www.doc-diy.net/photo/rc-1_hacked/
//#define PHOTOGRAPH_PIN 23
// Canon Hack Development Kit
// http://captain-slow.dk/2014/03/09/3d-printing-timelapses/
//#define CHDK_PIN 4
// Optional second move with delay to trigger the camera shutter
//#define PHOTO_SWITCH_POSITION { X_MAX_POS, Y_MAX_POS } // { xpos, ypos } (M240 I J)
// Duration to hold the switch or keep CHDK_PIN high
//#define PHOTO_SWITCH_MS 50 // (ms) (M240 D)
#endif
/**
@@ -1908,15 +1976,6 @@
//#define SPEED_POWER_MAX 100 // 0-100%
#endif
#if DISABLED(FilamentSensor) && DISABLED(TREX3)
#define FAN_AS_LASER
#endif
#if ENABLED(FAN_AS_LASER)
#define FAN_NUM_AS_LASER 1
#define LASER_PIN_DEDICATED true
#else
#define FAN_NUM_AS_LASER -1
#endif
/**
* Filament Width Sensor
*
@@ -2221,6 +2280,8 @@
#if ENABLED(WIFISUPPORT)
#define WIFI_SSID "Wifi SSID"
#define WIFI_PWD "Wifi Password"
//#define WEBSUPPORT // Start a webserver with auto-discovery
//#define OTASUPPORT // Support over-the-air firmware updates
#endif
/**
@@ -2295,7 +2356,7 @@
/**
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
*/
#define PINS_DEBUGGING
//#define PINS_DEBUGGING
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
Marlin/src/HAL/HAL_AVR/SanityCheck.h
+1 -1
View File
@@ -46,7 +46,7 @@
* Sanity checks for Spindle / Laser
*/
#if ENABLED(SPINDLE_LASER_ENABLE)
#if !PIN_EXISTS(SPINDLE_LASER_ENABLE)
#if SPINDLE_LASER_ENABLE_PIN <= 0
#error "SPINDLE_LASER_ENABLE requires SPINDLE_LASER_ENABLE_PIN."
#elif SPINDLE_DIR_CHANGE && !PIN_EXISTS(SPINDLE_DIR)
#error "SPINDLE_DIR_PIN not defined."
config/default/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/default/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/3DFabXYZ/Migbot/Configuration.h
+2135
View File
File diff suppressed because it is too large Load Diff
config/examples/3DFabXYZ/Migbot/Configuration_adv.h
+2324
View File
File diff suppressed because it is too large Load Diff
config/examples/3DFabXYZ/Migbot/Readme.md
+3
View File
@@ -0,0 +1,3 @@
Personalized config files for the "Electron"\"Tevo 3D" i3 6th gen
https://www.3dprintersbay.com/electron3d-reprap-prusa-i3-kit
https://reprap.org/wiki/Migbot_Prusa_i3
config/examples/AlephObjects/TAZ4/Configuration.h
+2124
View File
File diff suppressed because it is too large Load Diff
config/examples/AlephObjects/TAZ4/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/AliExpress/CL-260/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/examples/AliExpress/CL-260/README.txt
+15
View File
@@ -0,0 +1,15 @@
This is an example configuration for the CL-260 Ultimaker 2 clone.
Change Z_MAX_POS to 300 for the CL-260MAX.
(The printer is available on AliExpress; be aware that this is not a beginner's
printer -- it needs tweaking and some parts replaced before being decent.)
The printer comes with a quite old Marlin, the sources are available here:
http://www.thingiverse.com/thing:1635830/ and I recommend replacing them.
The setting "works" for my printer and the extruder using my calibration value.
You might want to tweak some settings, e.g enable EEPROM, increase default Z speed, adjust homing speeds,...
Have fun!
--
tobi
config/examples/AliExpress/UM2pExt/Configuration.h
+2115
View File
File diff suppressed because it is too large Load Diff
config/examples/AliExpress/UM2pExt/Configuration_adv.h
+2324
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A2/Configuration.h
+2106
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A2/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A2plus/Configuration.h
+2106
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A2plus/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A6/Configuration.h
+2258
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A6/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A8/Configuration.h
+2119
View File
File diff suppressed because it is too large Load Diff
config/examples/Anet/A8/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/AnimationExample/_Bootscreen.h
+339
View File
@@ -0,0 +1,339 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Animated boot screen example
*/
#define ANIMATED_BOOTSCREEN
#define CUSTOM_BOOTSCREEN_FRAME_TIME 100 // (ms)
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500 // (ms)
const unsigned char custom_start_bmp[] PROGMEM = {
B00011111,B11111111,B11111111,B11111111,B11111111,B11001111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B11011000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B10010000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000100,B00000000,B00000000,B00000000,B00000001,B10100000,B00000000,B00000000,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000000,B00000000,B00000000,B00000001,B01100000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000010,B00000000,B00000000,B00000000,B00000010,B01000000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B11111111,B10000000,B01111111,B11111110,B11000000,B00000000,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11000000,B01111111,B00001000,B10000001,B11100000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B01000000,B00000001,B00000011,B01000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B10110000,B00100111,B11111001,B00000010,B01000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B01000000,B11010000,B00110110,B00001101,B10000110,B10000000,B10100000,B00100010,B00010000,B00000010,B10000000,B11110000,B00000000,B00000000,B00000000,
B00000000,B01100000,B01001000,B00010010,B00000100,B10000101,B10000001,B00100000,B01000011,B00110000,B00000010,B00000000,B00111000,B00000000,B00000000,B00000000,
B00000000,B00100000,B00101000,B00001011,B00000010,B11001001,B00000011,B01000000,B11000011,B00110011,B10011010,B10111000,B00011000,B10001000,B00100010,B00000000,
B00000000,B00110000,B00100100,B00001001,B00000011,B01001011,B00000010,B11000000,B10000011,B00110000,B10010010,B10100100,B00011000,B01110000,B00011100,B00000000,
B00000000,B00010000,B00010110,B00000100,B10000001,B00110010,B00000110,B10000001,B10000010,B11010011,B10010010,B10100100,B00110000,B00100000,B00001000,B00000000,
B00000000,B00001000,B00011010,B00000110,B10000001,B10110100,B00000101,B10000001,B00000010,B11010100,B10010010,B10100100,B01110000,B01110000,B00011100,B00000000,
B00000000,B00001100,B00001011,B00000010,B01000000,B10000100,B00001001,B00000010,B00000010,B00010011,B10010010,B10100100,B11111010,B10001010,B10100010,B00000000,
B00000000,B00000100,B00001101,B00000011,B01100000,B01001000,B00001010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000110,B00000100,B10000001,B00100000,B01111000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000010,B00000010,B10000000,B10110000,B00110000,B00110100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000010,B01000000,B10010000,B00000000,B00101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000001,B01100000,B01001000,B00000000,B01001000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B10000001,B10100000,B01101000,B00000000,B01011000,B00010001,B11110000,B00000000,B00000000,B00010000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11000000,B10110000,B00100100,B00000000,B10010000,B00100000,B01000000,B00000000,B00000000,B00010000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01000000,B11010000,B00110110,B00000001,B10100000,B01100000,B01000011,B00110111,B00011100,B11110011,B10000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01100000,B01001000,B00010010,B00000001,B01100000,B01000000,B01000100,B10100100,B10000101,B10010100,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B00101100,B00001011,B00000001,B01000000,B11000000,B01000100,B10100100,B10011101,B00010100,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00010000,B00110100,B00001001,B00000001,B01000000,B10000000,B01000100,B10100100,B10100101,B00010100,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00011000,B00010110,B00000100,B10000001,B00100001,B00000000,B01000011,B00100100,B10011100,B11110011,B10000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001000,B00011010,B00000110,B10000001,B10100011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001100,B00001001,B00000010,B01000000,B10010010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000100,B00000101,B00000011,B01100000,B01011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000100,B10000001,B00100000,B01101100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000010,B11000000,B10110000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B00000011,B01000000,B10010000,B00110000,B11110000,B10010000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B10000001,B01100000,B01011000,B00010000,B10000000,B10000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B10000001,B10100000,B11010000,B00110000,B10000111,B10011110,B10111001,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B11000000,B10010000,B10010000,B00100000,B11101100,B10010100,B11000101,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01000000,B01011001,B00100000,B01000000,B10001000,B10010100,B11000101,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00100000,B01001011,B01100000,B01000000,B10001100,B10010100,B11000101,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00110000,B00101110,B01000000,B10000000,B11110111,B10010110,B10111001,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00010000,B00110110,B11000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011000,B00010000,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001000,B00001001,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001100,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000100,B00000110,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000010,B00000110,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B10000000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B10000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00110000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
#if ENABLED(ANIMATED_BOOTSCREEN)
const unsigned char custom_start_bmp1[] PROGMEM = {
B11111001,B11111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00011011,B00000000,B00000000,B00000000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010010,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00110100,B00000000,B00000000,B00000000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00101100,B00000000,B00000000,B00000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01001000,B00000000,B00000000,B00000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11011000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010000,B00111100,B00000111,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100000,B01101000,B00001011,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100000,B01001000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B10110000,B11010000,B00010100,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B10010000,B10110000,B00100100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01011001,B00100000,B01101000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01101001,B01100000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100110,B01000000,B11010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00110110,B10000000,B10110000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010000,B10000001,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001001,B00000001,B01000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001111,B00000010,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000110,B10000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000101,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00001011,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B10000000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11000000,B00110100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01000000,B00101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01100000,B00101000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100000,B00101000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B10010000,B00100100,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11010000,B00110100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01001000,B00010010,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01101100,B00001011,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100100,B00001101,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010110,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001011,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00011010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B01101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11001000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11011000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
const unsigned char custom_start_bmp2[] PROGMEM = {
B00011111,B11111111,B11111111,B11111111,B11111111,B11001111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B11011000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B10010000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000100,B00000000,B00000000,B00000000,B00000001,B10100000,B00000000,B00000000,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000000,B00000000,B00000000,B00000001,B01100000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000010,B00000000,B00000000,B00000000,B00000010,B01000000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B11111111,B10000000,B01111111,B11111110,B11000000,B00000000,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11000000,B01111111,B00001000,B10000001,B11100000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B01000000,B00000001,B00000011,B01000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B10110000,B00100111,B11111001,B00000010,B01000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B01000000,B11010000,B00110110,B00001101,B10000110,B10000000,B10100000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B01100000,B01001000,B00010010,B00000100,B10000101,B10000001,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00100000,B00101000,B00001011,B00000010,B11001001,B00000011,B01000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00110000,B00100100,B00001001,B00000011,B01001011,B00000010,B11000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00010000,B00010110,B00000100,B10000001,B00110010,B00000110,B10000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00001000,B00011010,B00000110,B10000001,B10110100,B00000101,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00001100,B00001011,B00000010,B01000000,B10000100,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000100,B00001101,B00000011,B01100000,B01001000,B00001010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000110,B00000100,B10000001,B00100000,B01111000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000010,B00000010,B10000000,B10110000,B00110000,B00110100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000010,B01000000,B10010000,B00000000,B00101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000001,B01100000,B01001000,B00000000,B01001000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B10000001,B10100000,B01101000,B00000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11000000,B10110000,B00100100,B00000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01000000,B11010000,B00110110,B00000001,B10100000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01100000,B01001000,B00010010,B00000001,B01100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B00101100,B00001011,B00000001,B01000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00010000,B00110100,B00001001,B00000001,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00011000,B00010110,B00000100,B10000001,B00100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001000,B00011010,B00000110,B10000001,B10100011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001100,B00001001,B00000010,B01000000,B10010010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000100,B00000101,B00000011,B01100000,B01011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000100,B10000001,B00100000,B01101100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000010,B11000000,B10110000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B00000011,B01000000,B10010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B10000001,B01100000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B10000001,B10100000,B11010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B11000000,B10010000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01000000,B01011001,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00100000,B01001011,B01100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00110000,B00101110,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00010000,B00110110,B11000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011000,B00010000,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001000,B00001001,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001100,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000100,B00000110,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000010,B00000110,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B10000000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B10000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00110000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
const unsigned char custom_start_bmp3[] PROGMEM = {
B00011111,B11111111,B11111111,B11111111,B11111111,B11001111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B11011000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B10010000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000100,B00000000,B00000000,B00000000,B00000001,B10100000,B00000000,B00000000,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000000,B00000000,B00000000,B00000001,B01100000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000010,B00000000,B00000000,B00000000,B00000010,B01000000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B11111111,B10000000,B01111111,B11111110,B11000000,B00000000,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11000000,B01111111,B00001000,B10000001,B11100000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B01000000,B00000001,B00000011,B01000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B10110000,B00100111,B11111001,B00000010,B01000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B01000000,B11010000,B00110110,B00001101,B10000110,B10000000,B10100000,B00100010,B00010000,B00000010,B10000000,B11110000,B00000000,B00000000,B00000000,
B00000000,B01100000,B01001000,B00010010,B00000100,B10000101,B10000001,B00100000,B01000011,B00110000,B00000010,B00000000,B00111000,B00000000,B00000000,B00000000,
B00000000,B00100000,B00101000,B00001011,B00000010,B11001001,B00000011,B01000000,B11000011,B00110011,B10011010,B10111000,B00011000,B10001000,B00100010,B00000000,
B00000000,B00110000,B00100100,B00001001,B00000011,B01001011,B00000010,B11000000,B10000011,B00110000,B10010010,B10100100,B00011000,B01110000,B00011100,B00000000,
B00000000,B00010000,B00010110,B00000100,B10000001,B00110010,B00000110,B10000001,B10000010,B11010011,B10010010,B10100100,B00110000,B00100000,B00001000,B00000000,
B00000000,B00001000,B00011010,B00000110,B10000001,B10110100,B00000101,B10000001,B00000010,B11010100,B10010010,B10100100,B01110000,B01110000,B00011100,B00000000,
B00000000,B00001100,B00001011,B00000010,B01000000,B10000100,B00001001,B00000010,B00000010,B00010011,B10010010,B10100100,B11111010,B10001010,B10100010,B00000000,
B00000000,B00000100,B00001101,B00000011,B01100000,B01001000,B00001010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000110,B00000100,B10000001,B00100000,B01111000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000010,B00000010,B10000000,B10110000,B00110000,B00110100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000010,B01000000,B10010000,B00000000,B00101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000001,B01100000,B01001000,B00000000,B01001000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B10000001,B10100000,B01101000,B00000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11000000,B10110000,B00100100,B00000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01000000,B11010000,B00110110,B00000001,B10100000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01100000,B01001000,B00010010,B00000001,B01100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B00101100,B00001011,B00000001,B01000000,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00010000,B00110100,B00001001,B00000001,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00011000,B00010110,B00000100,B10000001,B00100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001000,B00011010,B00000110,B10000001,B10100011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001100,B00001001,B00000010,B01000000,B10010010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000100,B00000101,B00000011,B01100000,B01011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000100,B10000001,B00100000,B01101100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000010,B11000000,B10110000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B00000011,B01000000,B10010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B10000001,B01100000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B10000001,B10100000,B11010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B11000000,B10010000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01000000,B01011001,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00100000,B01001011,B01100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00110000,B00101110,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00010000,B00110110,B11000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011000,B00010000,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001000,B00001001,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001100,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000100,B00000110,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000010,B00000110,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B10000000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B10000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00110000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
const unsigned char custom_start_bmp4[] PROGMEM = {
B00011111,B11111111,B11111111,B11111111,B11111111,B11001111,B11111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B11011000,B00000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001000,B00000000,B00000000,B00000000,B00000000,B10010000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000100,B00000000,B00000000,B00000000,B00000001,B10100000,B00000000,B00000000,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000110,B00000000,B00000000,B00000000,B00000001,B01100000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000010,B00000000,B00000000,B00000000,B00000010,B01000000,B00000000,B00000000,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B11111111,B10000000,B01111111,B11111110,B11000000,B00000000,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11000000,B01111111,B00001000,B10000001,B11100000,B00111000,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B01000000,B00000001,B00000011,B01000000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B10110000,B00100111,B11111001,B00000010,B01000000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B01000000,B11010000,B00110110,B00001101,B10000110,B10000000,B10100000,B00100010,B00010000,B00000010,B10000000,B11110000,B00000000,B00000000,B00000000,
B00000000,B01100000,B01001000,B00010010,B00000100,B10000101,B10000001,B00100000,B01000011,B00110000,B00000010,B00000000,B00111000,B00000000,B00000000,B00000000,
B00000000,B00100000,B00101000,B00001011,B00000010,B11001001,B00000011,B01000000,B11000011,B00110011,B10011010,B10111000,B00011000,B10001000,B00100010,B00000000,
B00000000,B00110000,B00100100,B00001001,B00000011,B01001011,B00000010,B11000000,B10000011,B00110000,B10010010,B10100100,B00011000,B01110000,B00011100,B00000000,
B00000000,B00010000,B00010110,B00000100,B10000001,B00110010,B00000110,B10000001,B10000010,B11010011,B10010010,B10100100,B00110000,B00100000,B00001000,B00000000,
B00000000,B00001000,B00011010,B00000110,B10000001,B10110100,B00000101,B10000001,B00000010,B11010100,B10010010,B10100100,B01110000,B01110000,B00011100,B00000000,
B00000000,B00001100,B00001011,B00000010,B01000000,B10000100,B00001001,B00000010,B00000010,B00010011,B10010010,B10100100,B11111010,B10001010,B10100010,B00000000,
B00000000,B00000100,B00001101,B00000011,B01100000,B01001000,B00001010,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000110,B00000100,B10000001,B00100000,B01111000,B00010010,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000010,B00000010,B10000000,B10110000,B00110000,B00110100,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000010,B01000000,B10010000,B00000000,B00101100,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000001,B00000001,B01100000,B01001000,B00000000,B01001000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B10000001,B10100000,B01101000,B00000000,B01011000,B00010001,B11110000,B00000000,B00000000,B00010000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11000000,B10110000,B00100100,B00000000,B10010000,B00100000,B01000000,B00000000,B00000000,B00010000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01000000,B11010000,B00110110,B00000001,B10100000,B01100000,B01000011,B00110111,B00011100,B11110011,B10000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B01100000,B01001000,B00010010,B00000001,B01100000,B01000000,B01000100,B10100100,B10000101,B10010010,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00100000,B00101100,B00001011,B00000001,B01000000,B11000000,B01000100,B10100100,B10011101,B00010100,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00010000,B00110100,B00001001,B00000001,B01000000,B10000000,B01000100,B10100100,B10100101,B00010010,B01000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00011000,B00010110,B00000100,B10000001,B00100001,B00000000,B01000011,B00100100,B10011100,B11110011,B10000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001000,B00011010,B00000110,B10000001,B10100011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00001100,B00001001,B00000010,B01000000,B10010010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000100,B00000101,B00000011,B01100000,B01011110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000100,B10000001,B00100000,B01101100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000010,B00000010,B11000000,B10110000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B00000011,B01000000,B10010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000001,B10000001,B01100000,B01011000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B10000001,B10100000,B11010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B11000000,B10010000,B10010000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01000000,B01011001,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00100000,B01001011,B01100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00110000,B00101110,B01000000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00010000,B00110110,B11000001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00011000,B00010000,B10000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001000,B00001001,B00000011,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001100,B00001001,B00000010,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000100,B00000110,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000010,B00000110,B00000100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B00000000,B00001000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000001,B10000000,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B10000000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B00100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B01000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00100000,B01000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00110000,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00001110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
const unsigned char * const custom_bootscreen_animation[] PROGMEM = {
custom_start_bmp1, custom_start_bmp2, custom_start_bmp3, custom_start_bmp4, custom_start_bmp
};
#endif
config/examples/AnyCubic/i3/Configuration.h
+2114
View File
File diff suppressed because it is too large Load Diff
config/examples/AnyCubic/i3/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/ArmEd/Configuration.h
+2105
View File
File diff suppressed because it is too large Load Diff
config/examples/ArmEd/Configuration_adv.h
+2326
View File
File diff suppressed because it is too large Load Diff
config/examples/Azteeg/X5GT/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/examples/BIBO/TouchX/cyclops/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/examples/BIBO/TouchX/cyclops/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/BIBO/TouchX/default/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/examples/BIBO/TouchX/default/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/Hephestos/Configuration.h
+2092
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/Hephestos/Configuration_adv.h
+2319
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/Hephestos_2/Configuration.h
+2104
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/Hephestos_2/Configuration_adv.h
+2327
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/Hephestos_2/README.md
+29
View File
@@ -0,0 +1,29 @@
# Example Configuration for BQ [Hephestos 2](http://www.bq.com/uk/hephestos-2)
Based on the original configuration file shipped with the heavily modified Marlin fork by BQ.
The forked firmware and configuration files can be found at the [BQ Github repository](https://github.com/bq/Marlin).
NOTE: The look and feel of the LCD menu will change dramatically when using the original Marlin firmware.
## Changelog
* 2018/05/30 - Configuration updated to the latest Marlin version (43a55a9af).
ABL Bilinear 5x5 is active by default.
* 2017/07/06 - Configuration updated to the latest Marlin version and added support for the
official BQ heated bed upgrade kit.
* 2016/12/13 - Configuration updated to the latest Marlin version.
* 2016/07/13 - Configuration updated to the latest Marlin version.
* 2016/06/21 - Disabled heated bed related options, activated software endstops and SD printing now
disables the heater when finishes printing.
* 2016/03/21 - Activated 4-point auto leveling by default and updated miscellaneous z-probe values.
* 2016/03/01 - The first release of Marlin's configuration file for the
BQ Hephestos 2 3D printer.
## Support
This configuration should work easily with the stock Hephestos 2, nevertheless if you encounter any
issues you may contact me on [Github](https://github.com/jbrazio), [Twitter](https://twitter.com/jbrazio) or by mail.
config/examples/BQ/Hephestos_2/_Bootscreen.h
+100
View File
@@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00001111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B11111000,B00000111,B11111000,B00000111,B11000000,B00000000,
B00000000,B00000001,B11111100,B00000011,B11110000,B00001111,B11100000,B00000000,
B00000000,B00000011,B11111110,B00000000,B11000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111110,B00000000,B00000000,B00011111,B11110000,B00000000,
B00000000,B00000011,B11111100,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000001,B11111000,B00000000,B00000000,B00001111,B11100000,B00000000,
B00000000,B00000000,B01110000,B00000000,B00000000,B00000011,B10000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111100,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11111000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00001111,B10000000,B00000000,B00000000,B01110000,B00000000,B00000000,B00000000,
B00011111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111000,B00000000,B00000000,B00000000,
B00111111,B11100000,B00000000,B00000000,B01111011,B11000000,B00001111,B00000000,
B00111111,B11000000,B00000000,B00000000,B01111111,B11110000,B00111111,B11000000,
B00011111,B10000000,B00000000,B00000000,B01111111,B11111000,B01111111,B11100000,
B00001111,B00000000,B00000000,B00000000,B01111110,B11111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00011101,B11100000,B01110000,
B00000000,B00000000,B00000000,B00000000,B01111000,B00111100,B11100000,B11110000,
B00000000,B00000000,B00000000,B00000000,B01111100,B01111100,B11111001,B11110000,
B00000000,B00000000,B00000000,B00000000,B00011111,B11111000,B11111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00001111,B11110000,B01111111,B11110000,
B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00011111,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01110000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/BQ/WITBOX/Configuration.h
+2092
View File
File diff suppressed because it is too large Load Diff
config/examples/BQ/WITBOX/Configuration_adv.h
+2319
View File
File diff suppressed because it is too large Load Diff
config/examples/Cartesio/Configuration.h
+2103
View File
File diff suppressed because it is too large Load Diff
config/examples/Cartesio/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Cartesio/_Bootscreen.h
+100
View File
@@ -0,0 +1,100 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_BMPWIDTH 64
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,
B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
B00000000,B00000000,B11111111,B11111111,B11111111,B11111111,B00000000,B00000000,
B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00001111,B00000111,B10000111,B11111111,B11111111,B11100000,B00000000,
B00000000,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B00000000,
B00000001,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
B00000011,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B10000000,
B00000111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11000000,
B00000111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11100000,
B00001111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
B00011111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11110000,
B00011111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11110000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11110001,B11111000,
B00111111,B00011111,B10001111,B11000111,B11111111,B11111111,B11100001,B11111000,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B00011111,B10001111,B11000111,B11000000,B00000000,B00000001,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B01111111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11111100,
B00111111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00111111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11111000,
B00011111,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
B00011111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11110000,
B00011111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11100000,
B00001111,B00000000,B00000000,B00000111,B11000111,B11100011,B11110001,B11000000,
B00000111,B00001111,B11111111,B11111111,B11000111,B11100011,B11110001,B11000000,
B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B10000000,
B00000011,B00011111,B11111111,B11111111,B11000111,B11100011,B11110001,B00000000,
B00000001,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
B00000000,B00011111,B11111111,B11111111,B11000111,B11100011,B11110000,B00000000,
B00000000,B00001111,B11111111,B11111111,B11000011,B11000001,B11100000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000111,B11000000,B00000000,B00000000,B00000000,
B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11000000,B00000000,
B00000000,B00000011,B11111111,B11111111,B11111111,B11111111,B10000000,B00000000,
B00000000,B00000001,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,
B00000000,B00000000,B01111111,B11111111,B11111111,B11111100,B00000000,B00000000,
B00000000,B00000000,B00011111,B11111111,B11111111,B11110000,B00000000,B00000000,
B00000000,B00000000,B00000111,B11111111,B11111111,B10000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/Creality/CR-10/Configuration.h
+2114
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10/Configuration_adv.h
+2325
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10/_Bootscreen.h
+55
View File
@@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/Creality/CR-10/_Statusscreen.h
+65
View File
@@ -0,0 +1,65 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_X 8
#define STATUS_LOGO_Y 5
#define STATUS_LOGO_WIDTH 22
const unsigned char status_logo_bmp[] PROGMEM = {
B00111110,B00001111,B11110000,
B11000001,B10000110,B00011000,
B11000001,B10000110,B00001100,
B00000001,B10000110,B00000100,
B00000011,B00000110,B00000100,
B00011111,B00000110,B00000100,
B00000011,B00000110,B00000100,
B00000001,B10000110,B00000100,
B11000001,B10000110,B00001100,
B11000001,B10000110,B00011000,
B00111110,B00001111,B11110000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#if HOTENDS < 2
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 32
#define STATUS_BED_X 80
#endif
config/examples/Creality/CR-10S/Configuration.h
+2105
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10S/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10S/_Bootscreen.h
+55
View File
@@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/Creality/CR-10S/_Statusscreen.h
+73
View File
@@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 1
#define STATUS_LOGO_WIDTH 36
const unsigned char status_logo_bmp[] PROGMEM = {
B00111101,B11110000,B00000010,B00111000,B11110000,
B01000100,B10001000,B00000110,B01000101,B00010000,
B10000000,B10001000,B00000010,B01000101,B00000000,
B10000000,B11110000,B00000010,B01000100,B10000000,
B10000000,B10100011,B11110010,B01000100,B01100000,
B10000000,B10010000,B00000010,B01000100,B00010000,
B10000000,B10010000,B00000010,B01000100,B00010000,
B01000100,B10001000,B00000010,B01000101,B00010000,
B00111001,B11001100,B00000111,B00111001,B11100000,
B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00111000,B01110000,B11100000,B00000000,
B00000000,B01000100,B10001001,B00010000,B00000000,
B00000000,B00000100,B10001001,B00010000,B00000000,
B00000000,B00011000,B10001001,B00010000,B00000000,
B00000000,B00000100,B10001001,B00010000,B00000000,
B00000000,B00000100,B10001001,B00010000,B00000000,
B00000000,B00000100,B10001001,B00010000,B00000000,
B00000000,B01000100,B10001001,B00010000,B00000000,
B00000000,B00111000,B01110000,B11100000,B00000000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#define STATUS_HEATERS_XSPACE 20
#if HOTENDS < 2
#define STATUS_HEATERS_X 48
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 80
#endif
config/examples/Creality/CR-10_5S/Configuration.h
+2107
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10_5S/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10_5S/_Bootscreen.h
+55
View File
@@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/Creality/CR-10mini/Configuration.h
+2123
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10mini/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-10mini/_Bootscreen.h
+55
View File
@@ -0,0 +1,55 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111100,B00000000,B00000000,
B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000001,B10000110,B00011111,B11000000,
B00011000,B01110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B01100000,
B00010000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00111100,B00001100,B00000000,B00000000,B00000001,B10000011,B00001100,B00110000,
B00110000,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00001100,B00000000,B00000000,B00000000,B00000011,B00001100,B00011000,
B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B01100000,B00000000,B00111111,B00001111,B00111100,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000001,B11011111,B00001111,B11100000,B11111110,B00000000,B01100000,B00011100,B00011100,B00000110,B00011000,B00000000,B00000110,B00001100,B00001100,
B01100000,B00000000,B11110011,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00011000,B00000000,B00011110,B00001100,B00001100,
B01100000,B00000000,B11100000,B00110000,B00111001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000011,B00001100,B00001100,
B01100000,B00000000,B11000000,B00110000,B00111000,B00001111,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00000000,B11000000,B00111111,B11111000,B11111011,B00000000,B01100000,B00001100,B00001100,B00000011,B00110000,B00000000,B00000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000001,B11110000,B00000001,B10000001,B10001100,B00001100,
B01100000,B00110000,B11000000,B00110000,B00000001,B10000011,B00000000,B01100000,B00001100,B00001100,B00000000,B11100000,B00000001,B10000001,B10001100,B00011000,
B00110000,B00110000,B11000000,B00011000,B00110001,B10000011,B00000000,B01100000,B00001100,B00001100,B01000000,B11100000,B00000001,B10000011,B10001100,B00110000,
B00011000,B01100000,B11000000,B00001100,B01100001,B10000111,B11000000,B11100000,B00011100,B00001100,B11000000,B01100000,B00000000,B11000011,B00001100,B01100000,
B00001111,B11000011,B11110000,B00000111,B11000000,B11111111,B11000111,B11111100,B01111111,B00000111,B10000001,B11000000,B00000000,B01111110,B00011111,B11000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000000,B00000000,B00000000,B00000000,B00000000
};
config/examples/Creality/CR-10mini/_Statusscreen.h
+73
View File
@@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 5
#define STATUS_LOGO_WIDTH 36
const unsigned char status_logo_bmp[] PROGMEM = {
B00000111,B11001111,B10000000,B00110001,B11100000,
B00001111,B11001111,B11000000,B01110011,B11110000,
B00001100,B00001100,B01000000,B01110011,B00110000,
B00001100,B00001100,B11000000,B00110011,B00110000,
B00001100,B00001111,B11001111,B00110011,B00110000,
B00001100,B00001101,B10001111,B00110011,B00110000,
B00001100,B00001100,B11000000,B00110011,B00110000,
B00001111,B11001100,B11000000,B00110011,B11110000,
B00000111,B11001100,B11000000,B00110001,B11100000,
B00000000,B00000000,B00000000,B00000000,B00000000,
B00000001,B10000011,B00110000,B00000011,B00000000,
B00000001,B10000011,B00110010,B00000011,B00000000,
B00000001,B11000111,B00000010,B11100000,B00000000,
B00000001,B11000111,B00110011,B11110011,B00000000,
B00000001,B11101111,B00110011,B00110011,B00000000,
B00000001,B10111011,B00110011,B00110011,B00000000,
B00000001,B10010011,B00110011,B00110011,B00000000,
B00000001,B10010011,B00110011,B00110011,B00000000,
B00000001,B10000011,B00110011,B00110011,B00000000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#define STATUS_HEATERS_XSPACE 20
#if HOTENDS < 2
#define STATUS_HEATERS_X 48
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 80
#endif
config/examples/Creality/CR-8/Configuration.h
+2114
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/CR-8/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-2/Configuration.h
+2108
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-2/Configuration_adv.h
+2319
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-2/README.md
+33
View File
@@ -0,0 +1,33 @@
# Creality Ender Support
This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
* 1.0.0 had very different serial output in `setup()` and overall code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
Configurations were found by seeing what code was compiled into the firmware, and constants used there.
For U8Glib, at least version 1.14 and at most 1.17 is used, because
* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.
## Bitmaps
The bootscreen and custom status screens come from Creality's firmware.
## Creality Ender-2 firmware status
The firmware source code has been published on 2018/07/10.
It is based on Marlin 1.1. The source code and .hex binaries for all printers (including Ender-2) can be obtained from:
https://www.creality3d.cn/download/firmware_c0001
And repositories for CR-10S and Ender-3 can be found here:
https://github.com/Creality3DPrinting
The configuration files have been verified to match the original configuration, but further investigation is needed to ensure there aren't any extra changes in the source code.
## Ender-2 specific changelog:
* 2018/10/08 - Updated BED_MAXTEMP to 75 to match the original Creality Ender-2 Firmware (which is now open source)
config/examples/Creality/Ender-2/_Bootscreen.h
+96
View File
@@ -0,0 +1,96 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
#define CUSTOM_BOOTSCREEN_INVERTED
const unsigned char custom_start_bmp[] PROGMEM = {
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
};
config/examples/Creality/Ender-2/_Statusscreen.h
+65
View File
@@ -0,0 +1,65 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 5
#define STATUS_LOGO_WIDTH 39
const unsigned char status_logo_bmp[] PROGMEM = {
B00000000,B00000000,B00000110,B00000000,B00000000,
B11111110,B00000000,B00000010,B00000000,B00000000,
B01000010,B00000000,B00000010,B00000000,B00000000,
B01001000,B00000000,B00000010,B00000000,B00000000,
B01001000,B11011100,B00111110,B00111100,B11101110,
B01111000,B01100010,B01000010,B01000010,B00110010,
B01001000,B01000010,B01000010,B01000010,B00100000,
B01001000,B01000010,B01000010,B01111110,B00100000,
B01000000,B01000010,B01000010,B01000000,B00100000,
B01000010,B01000010,B01000110,B01000010,B00100000,
B11111110,B11100111,B00111011,B00111100,B11111000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#define STATUS_HEATERS_XSPACE 20
#if HOTENDS < 2
#define STATUS_HEATERS_X 48
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 80
#endif
config/examples/Creality/Ender-3/Configuration.h
+2108
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-3/Configuration_adv.h
+2319
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-3/README.md
+18
View File
@@ -0,0 +1,18 @@
# Creality Ender Support
This branch is a reverse-engineered version based on the unpublished firmware from Creality. It is **not** the authoritative source, but has been carefully re-built by looking at their firmware and inferring the base version and configuration they used. The basis is the firmware version from "Jul 31 2017 10:16:30". It is based on Marlin 1.0.1, because
* 1.0.0 had very different serial output in `setup()` and overall code structure.
* 1.0.2 changed the `VERSION_STRING` to include a leading space, and `lcd_init` uses `SET_INPUT` instead of `pinMode`.
Configurations were found by seeing what code was compiled into the firmware, and constants used there.
For U8Glib, at least version 1.14 and at most 1.17 is used, because
* 1.12 didn't have the extra speed argument to u8g_InitCom.
* 1.13 didn't have the soft reset instruction for UC1701 initialization.
* 1.18 has a new directory structure.
## Bitmaps
The bootscreen and custom status screens come from Creality's firmware.
config/examples/Creality/Ender-3/_Bootscreen.h
+96
View File
@@ -0,0 +1,96 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Boot Screen bitmap
*
* Place this file in the root with your configuration files
* and enable SHOW_CUSTOM_BOOTSCREEN in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
#define CUSTOM_BOOTSCREEN_TIMEOUT 1000
#define CUSTOM_BOOTSCREEN_BMPWIDTH 81
#define CUSTOM_BOOTSCREEN_INVERTED
const unsigned char custom_start_bmp[] PROGMEM = {
B11111111,B11111111,B11111111,B11111111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11101111,B11101111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100111,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11100011,B11011111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11110011,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11100001,B11100001,B11001111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111110,B01111000,B00000000,B00000000,B00000011,B11011101,B11111111,B11111111,B11111111,B11111111,
B11111110,B11111111,B10000000,B01111110,B00000000,B00000001,B11101110,B11111111,B11111111,B11111111,B11111111,
B11111110,B01111101,B11001111,B11111100,B00000000,B00000000,B11110111,B01111111,B11111111,B11111111,B11111111,
B11111111,B10001110,B00000110,B00000000,B00000000,B00000000,B01111011,B10111111,B11111111,B11111111,B11111111,
B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B01111101,B11011111,B11111111,B11111111,B11111111,
B11111111,B11111100,B00000001,B11111110,B00000000,B00000000,B00111110,B11100111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111100,B00000000,B00000011,B00011111,B01110011,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111000,B00000000,B00000001,B10001111,B10000001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11100000,B00000000,B00000000,B10000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B00000000,B11111100,B00000000,B00000000,B11110000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11100000,B00001111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111110,B00000011,B11111111,B11111111,B11000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111001,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111100,B00000000,B00000111,B11000000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B00000000,B00000111,B11100000,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00000111,B11110001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B00000111,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B00000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B10000011,B11111001,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11000011,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11100001,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11110000,B10111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111011,B11111000,B00111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111001,B11111000,B00111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B01111110,B11110000,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B10001110,B00000011,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11100000,B00011111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B01111111,B11111111,B11111111,B11111111,
B11111111,B00000000,B00000000,B01111111,B11111111,B11111111,B11111000,B01111111,B11111111,B11111111,B11111111,
B11111111,B10000000,B00000000,B01111111,B11111111,B11111111,B11100000,B01111111,B11111111,B11111111,B11111111,
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
B11111111,B11000011,B11111100,B11111111,B11111111,B11111111,B11111000,B11111111,B11111111,B11111111,B11111111,
B11111111,B10000111,B11111101,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
B11111111,B10000111,B11111111,B11111111,B11111111,B11111111,B11110001,B11111111,B11111111,B11111111,B11111111,
B11111111,B00001111,B11100111,B11110011,B00001111,B11111100,B00100011,B11111100,B00111111,B11111111,B11111111,
B11111111,B00001111,B11101111,B10000000,B00000111,B11110000,B00000011,B11110000,B00011110,B00000000,B01111111,
B11111110,B00011111,B11001111,B10000001,B10000111,B11000111,B10000111,B11000111,B00001100,B00000000,B01111111,
B11111110,B00000000,B00011111,B11000111,B11000111,B10001111,B11000111,B10011111,B00001111,B00001100,B11111111,
B11111110,B00000000,B00011111,B10000111,B10001111,B00011111,B10001111,B00011111,B00001111,B00011111,B11111111,
B11111100,B00111111,B10011111,B10001111,B10001111,B00011111,B10001110,B00000000,B00011110,B00111111,B11111111,
B11111100,B01111111,B00111111,B00001111,B00011110,B00111111,B00011110,B00111111,B11111110,B00111111,B11111111,
B11111000,B01111111,B11111111,B00011111,B00011100,B00111111,B00011100,B01111111,B11111100,B01111111,B11111111,
B11111000,B11111111,B11111111,B00011110,B00011100,B01111110,B00011100,B01111111,B11111100,B01111111,B11111111,
B11110000,B11111111,B11001110,B00111110,B00111100,B01111110,B00111100,B01111111,B10111000,B11111111,B11111111,
B11110000,B11111111,B10011110,B00111100,B00111000,B01111100,B00111000,B01111110,B01111000,B11111111,B11111111,
B11100001,B11111111,B00111100,B01111100,B01111000,B01111100,B01111000,B00111100,B11110001,B11111111,B11111111,
B11100001,B11111000,B00111000,B01111000,B01111000,B00010000,B00011000,B00000001,B11110001,B11111111,B11111111,
B00000000,B00000000,B01100000,B00100000,B00111100,B00000000,B01111100,B00000111,B10000000,B01111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111110,B00011111,B11111110,B00011111,B11111111,B11111111,B11111111
};
config/examples/Creality/Ender-3/_Statusscreen.h
+61
View File
@@ -0,0 +1,61 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 8
#define STATUS_LOGO_WIDTH 39
const unsigned char status_logo_bmp[] PROGMEM = {
B11111000,B00000001,B10000000,B00000000,B00001100,
B01001000,B00000000,B10000000,B00000000,B00010010,
B01000011,B11000011,B10001100,B11010000,B00000010,
B01110001,B00100100,B10010010,B01100111,B11001100,
B01000001,B00100100,B10011110,B01000000,B00000010,
B01001001,B00100100,B10010000,B01000000,B00010010,
B11111011,B10110011,B11001110,B11100000,B00001100
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#define STATUS_HEATERS_XSPACE 20
#if HOTENDS < 2
#define STATUS_HEATERS_X 48
#define STATUS_BED_X 72
#else
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 80
#endif
config/examples/Creality/Ender-4/Configuration.h
+2114
View File
File diff suppressed because it is too large Load Diff
config/examples/Creality/Ender-4/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Einstart-S/Configuration.h
+2110
View File
File diff suppressed because it is too large Load Diff
config/examples/Einstart-S/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Einstart-S/readme.md
+152
View File
@@ -0,0 +1,152 @@
## Einstart S Machine Notes
The Einstart S is a commercial machine that ships with a proprietary firmware and "licensed" slicer program which requires the original SD card or license file (.lic/.reg) from support in order to function. The impetus for the port was that I acquired the machine on the weekend when tech support was closed.
## Specifications:
- Powder coated, formed steel enclosure
- Machined Aluminum internal axis support frame
- Genuine matched HIWIN rails on all axis
- Genuine Minebea NEMA17 motors (200 steps/rev)
- THC7128 3A Stepper Drivers (configured for 16 microsteps, loud)
- 160x160 magnetically coupled non-heated bed
- PLA-only, Direct Drive extruder
- SH1106 OLED Display w/ Cardinal navigation
- 9533 I2C PWM RGB LED Chassis illumination
- Onboard SD-Card Support
## Initial modifications
### Bootloader/Marlin installation
This machine probably doesn't ship with the arduino boot loader, so unless you reflow a 2560 on there to replace the atmega1280 like I did (to preserve the original firmware), you'll need to use ISP to do an initial firmware load and/or bootloader flash!
It's not that bad though, you can just buy an ISP programmer with the appropriate header, or build an ISP programmer using the Arduino ISP sketch (wiring is easier if you use the "old style wiring" which utilizes the following pinout: (see the comments in the ArduinoISP sketch).
I used an arduino Nano and a header I had lying around, but you could do the same with a nano and some dupont headers cut and soldered to the board, and taped/glued into a header.
Triple check your pinouts, it shouldn't fry if connected backwards but if your pinout is wrong you're going to struggle for sure.
#### ArduinoISP Sketch pinout for 10pin ISP header using "old style wiring":
See the comments in the ArduinoISP sketch under File:Examples:ArduinoISP
1 MOSI D11
2 5v Vcc
3 N/C
4 GND
5 RES D10
6 N/C
7 SCK D13
8 N/C
9 MISO D12
10 GND GND
#### Einstart Motherboard ISP Header Pinout
The 10 pin ISP Header is located to the right of the ATMEGA chip, just above the long LCD header.
#### ISP Diagram
<--- Face of chassis
MOSI ( 1 ) ( 2 ) Vcc
N/C ( 3 ) ( 4 ) GND
RST ( 5 ) ( 6 ) GND
SCK ( 7 ) ( 8 ) GND
MISO ( 9 ) (10 ) GND
Component Plugs --->
### Motherboard Diagram
|1234|1234|1234|1234|12|12|12|12|12|12|12|12|12|12|123|12|1234|
---------------------------------------------------------------
| XMOT YMOT ZMOT EMOT EF HB HE PF ZS YS XS PS BT ET PT1 TC VBRG |
| ===== ====== [DC|
|====== ====== ____ ISP IC1__ ___|
| |1280| ::::: | | |USB|
| |____| 1 |__| |___|
| BUTTON |SD |
| GDLRUO LCD |___|
|________________________[......][....................]_________|
Legend:
XMOT X-Motor
YMOT Y-Motor
ZMOT Z-Motor
EMOT E-Motor
EF Extruder Fan
HB Heated Bed (PWM)
HE Hot End (PWM)
PF Part Fan (PWM)
ZS Z-Endstop (Max)
YS Y-Endstop (Min)
XS X-Endstop (Min)
PS SPST Switch to enable DC 24v
BT Bed Thermistor (header not populated)
ET Extruder Thermistor
PT1 PT100 Thermocouple (not populated)
TC Thermocouple (not populated)
VBRG LED Output from PCA5933
BUTTONS
G GND (buttons are pulled low on activation)
D DOWN
L LEFT
R RIGHT
U UP
O OK (MIDDLE)
## Uploading Marlin firmware to a stock Einstart S
### Summary:
Make, buy or steal a 10 pin ISP programmer and select the appropriate programmer option via Tools:Programmer in Arduino IDE, use the Sketch:Upload Using Programmer command or Shift-Ctrl-U (vs Ctrl-U to upload via serial).
### Detailed procedure:
You can either load Marlin directly via ISP programmer (easiest, but requires opening the chassis every time you want to change/update firmware) or, just program the bootloader which will enable later uploads via USB. HOWEVER, to actually upload the sketch you will need one of the following:
- ISP programming header (ArduinoISP sketch, pinout below)
- OR
- Install bootloader on atmega1280 to enable native USB uploads (also requires ISP).
- AND
- Connect button between RESET and GND on ISP header, release post compile just before upload starts.
- OR
- Install permanent modification described below, requires no button press during upload.
### Permanent modification to enable USB uploads via Arduino IDE
As a permanent modification to enable direct USB upload from the arduino IDE, you would need to flash the boot loader using ISP first; but then you can solder a wire or 100n capacaitor between the DTR line on the FTDI to the reset line, which is conveniently located in several places on the board.
#### FTDI Chip Diagram (IC1)
______
TXD --|1 28|--OSCO
DTR --|2 27|--OSCI
RTS --|3 26|--TEST
VCCIO--|4 25|--AGND
RXD --|5 24|--N/C
RI --|6 23|--CBUS0
GND --|7 22|--CBUS1
N/C --|8 21|--GND
DSR --|9 20|--Vcc
DCD --|10 19|--RES
CTS --|11 18|--GND
CBUS4--|12 17|--3V3
CBUS2--|13 16|--USBDM
CBUS3--|14 15|--USBDP
|______|
#### Arduino Reset Circuit
DTR-----||----GND----/\/\/\/----Vcc
100nf 10k
With this modification you no longer need the reset button and you can program directly from the Arduino IDE.
### Power notes during flashing.
You do NOT need power connected when flashing via ISP.
You DO need power when flashing via USB Serial but you MUST time the release of the reset line to allow the upload unless you've performed the permanent modification.
config/examples/Felix/Configuration.h
+2086
View File
File diff suppressed because it is too large Load Diff
config/examples/Felix/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Felix/DUAL/Configuration.h
+2086
View File
File diff suppressed because it is too large Load Diff
config/examples/Felix/README.md
+60
View File
@@ -0,0 +1,60 @@
# Felix 2.0/3.0 Configuration for Marlin Firmware
Bringing silky smooth prints to Felix.
## Build HOWTO
- Install the latest non-beta Arduino software IDE/toolset: http://www.arduino.cc/en/Main/Software
- Download the Marlin firmware
- [Latest developement version](https://github.com/MarlinFirmware/Marlin/tree/Development)
- [Stable version](https://github.com/MarlinFirmware/Marlin/tree/Development)
- In both cases use the "Download Zip" button on the right.
```
cd Marlin/src
cp config/examples/Felix/Configuration_adv.h .
```
The next step depends on your setup:
### Single Extruder Configuration
cp config/examples/Felix/Configuration.h .
### Dual Extruder Configuration
cp config/examples/Felix/DUAL/Configuration.h Configuration.h
### Compile Firmware
- Start the Arduino IDE.
- Select Tools -> Board -> Arduino Mega 2560
- Select the correct serial port in Tools -> Serial Port (usually /dev/ttyUSB0)
- Open Marlin.pde or .ino
- Click the Verify/Compile button
### Flash Firmware
#### Connected directly via USB
- Click the Upload button. If all goes well the firmware is uploading
#### Remote update
Find the latest Arduino build:
ls -altr /tmp/
drwxr-xr-x 5 chrono users 12288 Mar 3 21:41 build6072035599686630843.tmp
Copy the firmware to your printer host:
scp /tmp/build6072035599686630843.tmp/Marlin.cpp.hex a.b.c.d:/tmp/
Connect to your printer host via ssh, stop Octoprint or any other service that may block your USB device and make sure you have avrdude installed, then run:
avrdude -C/etc/avrdude.conf -v -v -v -patmega2560 -cwiring -P/dev/ttyUSB0 \
-b115200 -D -Uflash:w:/tmp/Marlin.cpp.hex:i
## Acknowledgements
Mashed together and tested on https://apollo.open-resource.org/mission:resources:picoprint based on collaborative teamwork of @andrewsil1 and @thinkyhead.
config/examples/FlashForge/CreatorPro/Configuration.h
+2095
View File
File diff suppressed because it is too large Load Diff
config/examples/FlashForge/CreatorPro/Configuration_adv.h
+2318
View File
File diff suppressed because it is too large Load Diff
config/examples/FolgerTech/i3-2020/Configuration.h
+2110
View File
File diff suppressed because it is too large Load Diff
config/examples/FolgerTech/i3-2020/Configuration_adv.h
+2330
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/Raptor/Configuration.h
+2209
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/Raptor/Configuration_adv.h
+2326
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/Raptor/_Bootscreen.h
+94
View File
@@ -0,0 +1,94 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Bitmap for splashscreen
*
* You may use one of the following tools to generate the C++ bitmap array from
* a black and white image:
*
* - http://www.marlinfw.org/tools/u8glib/converter.html
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
*/
#include <avr/pgmspace.h>
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
#define CUSTOM_BOOTSCREEN_INVERTED
const unsigned char custom_start_bmp[] PROGMEM = {
B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,B11111111,B11111111,B11111111,
B11111110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11111111,
B11111100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
B11111100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
B11111110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
B11111100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000110,B00000111,B11000000,B00000000,B00000001,B11110000,B00111111,
B11111110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000100,B00001010,B00100000,B00000000,B00000010,B00001000,B00011111,
B11111100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000110,B00010100,B00010000,B00000000,B00000101,B00000100,B00111111,
B11111110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000100,B00101000,B00001000,B00000000,B00001010,B00000010,B00011111,
B11111100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000110,B01010100,B00000100,B00000000,B00010101,B00000001,B00111111,
B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
B11111100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101110,B01010000,B00000100,B00000000,B00010100,B00000001,B00111111,
B11111110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010100,B01100000,B00000100,B00000000,B00011000,B00000001,B00011111,
B11111100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100110,B01010100,B00000100,B00011100,B00010101,B00000001,B00111111,
B11111110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010100,B00101000,B00001000,B00101010,B00001010,B00000010,B00011111,
B11111100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101110,B00010100,B00010000,B01010001,B00000101,B00000100,B00111111,
B11111110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00001010,B00100000,B01100001,B00000010,B10001000,B00011111,
B11111100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000110,B00000111,B11000000,B01010001,B00000001,B11110000,B00111111,
B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000100,B00000000,B00000000,B00101010,B00000000,B00000000,B00011111,
B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111110,B00000000,B00000000,B00011100,B00000000,B00000000,B00111111,
B11111110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010100,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,
B11111100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000110,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000110,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000100,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111100,B11000100,B00010000,B01000001,B00000100,B00010001,B10111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000110,B10000100,B00010000,B01000001,B00000100,B00010000,B10011111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010100,B11010101,B01010101,B01010101,B01010101,B01010101,B10111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111100,B11111111,B11111111,B11111111,B11111111,B11111111,B10011111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111101,B01010101,B01010101,B01010101,B01010101,B01010101,B01011111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,B11111111,
B11100000,B00101110,B11111011,B01111101,B11111011,B11111011,B11001111,B11000001,B11011111,B10111011,B00111110,B11000000,B11100001,B11111110,B00111100,B00011111,
B11111101,B11101110,B01111011,B00111001,B11111001,B11110011,B11001111,B10011110,B11011111,B10111011,B00111110,B11011111,B11011110,B11111100,B11011101,B11100111,
B11111101,B11101110,B00111011,B10111011,B11111001,B11101011,B11010111,B10111111,B01011111,B10111011,B01011110,B11011111,B11011110,B11111101,B11101101,B11110111,
B11111101,B11101110,B10111011,B11010011,B11111010,B11101011,B10110111,B00111111,B11011111,B10111011,B01001110,B11011111,B11011111,B11111111,B11001101,B11110011,
B11111101,B11101110,B11011011,B11000111,B11111010,B11101011,B10111011,B01111111,B11000000,B00111011,B01101110,B11000000,B11100011,B11111111,B00011101,B11110011,
B11111101,B11101110,B11001011,B11101111,B11111010,B11011011,B10111011,B01111111,B11011111,B10111011,B01100110,B11011111,B11111000,B11111111,B11001101,B11110011,
B11111101,B11101110,B11101011,B11101111,B11111011,B01011011,B00000011,B00111111,B01011111,B10111011,B01110110,B11011111,B11111110,B01111111,B11101101,B11110011,
B11111101,B11101110,B11110011,B11101111,B11111011,B01011011,B01111001,B10111110,B11011111,B10111011,B01111010,B11011111,B11011110,B01111101,B11101101,B11110111,
B11111101,B11101110,B11110011,B11101111,B11111011,B10111010,B11111101,B10011110,B11011111,B10111011,B01111100,B11011111,B11011110,B11111101,B11001101,B11100111,
B11111101,B11101110,B11111011,B11101111,B11111011,B10111010,B11111101,B11000001,B11011111,B10111011,B01111110,B11000000,B11100000,B11111110,B00011100,B00011111
};
config/examples/Formbot/Raptor/_Statusscreen.h
+74
View File
@@ -0,0 +1,74 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 3
#define STATUS_LOGO_WIDTH 24
const unsigned char status_logo_bmp[] PROGMEM = {
B11111111,B11111111,B11111111,
B10000000,B00000000,B00000001,
B10001110,B00000000,B11100001,
B10011111,B00000001,B11110001,
B10010011,B10000001,B00111001,
B10011111,B10000001,B11111001,
B10011111,B10000001,B11111001,
B10011111,B10111001,B11111001,
B10001111,B00101000,B11110001,
B10000000,B00111000,B00000001,
B10000000,B00000000,B00000001,
B10011111,B11111111,B11111001,
B10010001,B01110100,B10011001,
B10011011,B00000110,B10101001,
B10011011,B01010100,B10101001,
B10011011,B01010110,B10101001,
B10011011,B01010100,B10011001,
B10011111,B11111111,B11111001,
B11111111,B11111111,B11111111
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#if HOTENDS < 2
#define STATUS_LOGO_X 8
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 72
#else
#define STATUS_LOGO_X 0
#define STATUS_HEATERS_X 32
#define STATUS_BED_X 80
#endif
config/examples/Formbot/T_Rex_2+/Configuration.h
+2139
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/T_Rex_2+/Configuration_adv.h
+2336
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/T_Rex_2+/_Bootscreen.h
+102
View File
@@ -0,0 +1,102 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Bitmap for splashscreen
*
* You may use one of the following tools to generate the C++ bitmap array from
* a black and white image:
*
* - http://www.marlinfw.org/tools/u8glib/converter.html
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
*/
#include <avr/pgmspace.h>
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11100000,B00111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11111111,B00000000,B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00000000,B00000000,
B00000000,B11111111,B11111111,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,
B00000000,B10000011,B11000001,B00000000,B01110000,B00111100,B00000000,B00111000,B00000011,B11000000,B01111000,B00000000,B00000111,B00111000,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000001,B11111110,B00000000,B11000000,B01100000,B00000000,B00001110,B00011100,B00000110,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000011,B11000111,B00000000,B01100000,B11000000,B00000000,B00001100,B00001100,B00000110,B00000000,
B00000000,B00000011,B11000000,B00000000,B01111110,B01111000,B00000110,B00000001,B10000000,B00110001,B10000000,B00000000,B00000000,B00001100,B00000110,B00000000,
B00000000,B00000011,B11000000,B11111111,B01111111,B11100000,B00000110,B00000001,B11000000,B00011011,B00000000,B00000000,B00000000,B00011100,B00111111,B11000000,
B00000000,B00000011,B11000000,B11111111,B01110000,B11100000,B00001111,B11111111,B11000000,B00001111,B00000000,B00000000,B00000000,B00111000,B00111111,B11000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B01111000,B00001100,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B01110000,B00000110,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000110,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B01100000,B00000110,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000110,B00000000,B11000000,B00110000,B11000000,B00000000,B00000001,B11000000,B00000110,B00000000,
B10000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000011,B10000001,B10000000,B01100000,B01100000,B00000000,B00000011,B10000000,B00000000,B00000001,
B10000000,B00000011,B11000000,B00000000,B01110000,B00001110,B10000001,B11111111,B10000000,B11000000,B00110000,B00000000,B00001111,B11111100,B00000000,B00000001,
B10000000,B00000011,B11000000,B00000000,B01110000,B00000111,B00000000,B01111100,B00000011,B10000000,B00011100,B00000000,B00011111,B11111100,B00000000,B00000001,
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111
};
config/examples/Formbot/T_Rex_2+/_Statusscreen.h
+73
View File
@@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 4
#define STATUS_LOGO_WIDTH 21
const unsigned char status_logo_bmp[] PROGMEM = {
B00000000,B00011110,B00000000,
B00000000,B11111111,B10000000,
B00000001,B11111111,B11100000,
B00000111,B00000000,B00000000,
B00001111,B00000000,B00000000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00000000,B00000000,
B00011111,B00000000,B00000000,
B00001111,B00001111,B11111000,
B00000111,B00001111,B11110000,
B00000011,B00001111,B11000000,
B00000001,B00001111,B00000000,
B00000000,B00001100,B00000000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#if HOTENDS < 2
#define STATUS_LOGO_X 8
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 72
#else
#define STATUS_LOGO_X 0
#define STATUS_HEATERS_X 32
#define STATUS_BED_X 80
#endif
config/examples/Formbot/T_Rex_3/Configuration.h
+2132
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/T_Rex_3/Configuration_adv.h
+2331
View File
File diff suppressed because it is too large Load Diff
config/examples/Formbot/T_Rex_3/_Bootscreen.h
+102
View File
@@ -0,0 +1,102 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Bitmap for splashscreen
*
* You may use one of the following tools to generate the C++ bitmap array from
* a black and white image:
*
* - http://www.marlinfw.org/tools/u8glib/converter.html
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
*/
#include <avr/pgmspace.h>
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
const unsigned char custom_start_bmp[] PROGMEM = {
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11111111,B11111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00011111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11100000,B00111111,B11111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11100000,B00111111,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B11100000,B00111111,B11111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B11100000,B00111111,B11111111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00111111,B11111111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00011111,B11111110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,
B00000000,B11111111,B11111111,B00000000,B01111111,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000001,B11100000,B00000000,B00000000,
B00000000,B11111111,B11111111,B00000000,B01111111,B11111000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11110000,B00000000,B00000000,
B00000000,B10000011,B11000001,B00000000,B01110000,B00111100,B00000000,B00111000,B00000011,B11000000,B01111000,B00000000,B00001100,B00011000,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000001,B11111110,B00000000,B11000000,B01100000,B00000000,B00000000,B00001100,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000011,B11000111,B00000000,B01100000,B11000000,B00000000,B00000000,B00001100,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01111110,B01111000,B00000110,B00000001,B10000000,B00110001,B10000000,B00000000,B00000000,B00011100,B00000000,B00000000,
B00000000,B00000011,B11000000,B11111111,B01111111,B11100000,B00000110,B00000001,B11000000,B00011011,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,
B00000000,B00000011,B11000000,B11111111,B01110000,B11100000,B00001111,B11111111,B11000000,B00001111,B00000000,B00000000,B00000011,B11111000,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B01111000,B00001100,B00000000,B00000000,B00001111,B00000000,B00000000,B00000000,B00011100,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00111100,B00000110,B00000000,B00000000,B00011001,B10000000,B00000000,B00000000,B00001100,B00000000,B00000000,
B00000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000110,B00000000,B11000000,B00110000,B11000000,B00000000,B00000000,B00001100,B00000000,B00000000,
B10000000,B00000011,B11000000,B00000000,B01110000,B00011110,B00000011,B10000001,B10000000,B01100000,B01100000,B00000000,B00001100,B00011000,B00000000,B00000001,
B10000000,B00000011,B11000000,B00000000,B01110000,B00001110,B10000001,B11111111,B10000000,B11000000,B00110000,B00000000,B00000111,B11110000,B00000000,B00000001,
B10000000,B00000011,B11000000,B00000000,B01110000,B00000111,B00000000,B01111100,B00000011,B10000000,B00011100,B00000000,B00000001,B11100000,B00000000,B00000001,
B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00001111
};
config/examples/Formbot/T_Rex_3/_Statusscreen.h
+73
View File
@@ -0,0 +1,73 @@
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <http://www.gnu.org/licenses/>.
*
*/
/**
* Custom Status Screen bitmap
*
* Place this file in the root with your configuration files
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
*
* Use the Marlin Bitmap Converter to make your own:
* http://marlinfw.org/tools/u8glib/converter.html
*/
//
// Status Screen Logo bitmap
//
#define STATUS_LOGO_Y 4
#define STATUS_LOGO_WIDTH 21
const unsigned char status_logo_bmp[] PROGMEM = {
B00000000,B00011110,B00000000,
B00000000,B11111111,B10000000,
B00000001,B11111111,B11100000,
B00000111,B00000000,B00000000,
B00001111,B00000000,B00000000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00001111,B11111000,
B00011111,B00000000,B00000000,
B00011111,B00000000,B00000000,
B00001111,B00001111,B11111000,
B00000111,B00001111,B11110000,
B00000011,B00001111,B11000000,
B00000001,B00001111,B00000000,
B00000000,B00001100,B00000000
};
//
// Use default bitmaps
//
#define STATUS_HOTEND_ANIM
#define STATUS_BED_ANIM
#if HOTENDS < 2
#define STATUS_LOGO_X 8
#define STATUS_HEATERS_X 40
#define STATUS_BED_X 72
#else
#define STATUS_LOGO_X 0
#define STATUS_HEATERS_X 32
#define STATUS_BED_X 80
#endif
config/examples/Geeetech/A10M/Configuration.h
+2089
View File
File diff suppressed because it is too large Load Diff
config/examples/Geeetech/A10M/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Geeetech/A20M/Configuration.h
+2093
View File
File diff suppressed because it is too large Load Diff
config/examples/Geeetech/A20M/Configuration_adv.h
+2322
View File
File diff suppressed because it is too large Load Diff
config/examples/Geeetech/GT2560/Configuration.h
+2128
View File
File diff suppressed because it is too large Load Diff

Some files were not shown because too many files have changed in this diff Show More