Breakout for sd detect pin

Marlin/Configuration.h

@@ -155,7 +155,7 @@
 //#define ABL_BI
 #define ABL_UBL
 
-
+//#define BoardRev2
 
 
 #if(!ENABLED(MachineCR10Orig))

Marlin/Configuration_adv.h

@@ -514,7 +514,7 @@
 #define LCD_TIMEOUT_TO_STATUS 15000
 
 // Add an 'M73' G-code to set the current percentage
-//#define LCD_SET_PROGRESS_MANUALLY
+#define LCD_SET_PROGRESS_MANUALLY
 
 #if ENABLED(SDSUPPORT) || ENABLED(LCD_SET_PROGRESS_MANUALLY)
   //#define LCD_PROGRESS_BAR              // Show a progress bar on HD44780 LCDs for SD printing
@@ -551,6 +551,7 @@
   // as SD_DETECT_PIN in your board's pins definitions.
   // This setting should be disabled unless you are using a push button, pulling the pin to ground.
   // Note: This is always disabled for ULTIPANEL (except ELB_FULL_GRAPHIC_CONTROLLER).
+
   #define SD_DETECT_INVERTED
 
   #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
@@ -604,7 +605,7 @@
   #endif
 
   // This allows hosts to request long names for files and folders with M33
-  //#define LONG_FILENAME_HOST_SUPPORT
+  #define LONG_FILENAME_HOST_SUPPORT
 
   // Enable this option to scroll long filenames in the SD card menu
   #define SCROLL_LONG_FILENAMES
@@ -626,7 +627,7 @@
   /**
    * Auto-report SdCard status with M27 S<seconds>
    */
-  //#define AUTO_REPORT_SD_STATUS
+  #define AUTO_REPORT_SD_STATUS
 
 #endif // SDSUPPORT
 

Marlin/pins_RAMPS.h

@@ -422,9 +422,13 @@
       #endif
 
       #define BTN_ENC           35
-      #define SD_DETECT_PIN     49
-      #define KILL_PIN          41
-
+      #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+        
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
+    #define KILL_PIN          41
       #if ENABLED(BQ_LCD_SMART_CONTROLLER)
         #define LCD_BACKLIGHT_PIN 39
       #endif
@@ -434,8 +438,13 @@
       #define BTN_EN1           64
       #define BTN_EN2           59
       #define BTN_ENC           63
-      #define SD_DETECT_PIN     42
-
+       #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
+      #define KILL_PIN          41
+      
     #elif ENABLED(LCD_I2C_PANELOLU2)
 
       #define BTN_EN1           47
@@ -451,7 +460,7 @@
       #define BTN_ENC           -1
 
       #define LCD_SDSS          SDSS
-      #define SD_DETECT_PIN     49
+      //#define SD_DETECT_PIN     49
 
     #elif ENABLED(VIKI2) || ENABLED(miniVIKI)
 
@@ -482,8 +491,12 @@
       #define BTN_EN2           37
       #define BTN_ENC           31
 
-      #define LCD_SDSS          SDSS
-      #define SD_DETECT_PIN     49
+      #define LCD_SDSS          SDSS 
+      #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
       #define KILL_PIN          41
 
     #elif ENABLED(MKS_MINI_12864)   // Added in Marlin 1.1.6
@@ -506,9 +519,13 @@
       #define BTN_EN2           33
       #define BTN_ENC           35
 
-      #define SD_DETECT_PIN     49
-      #define KILL_PIN          64
-
+       #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
+      #define KILL_PIN          41
+      
     #elif ENABLED(MINIPANEL)
 
       #define BEEPER_PIN        42
@@ -529,9 +546,13 @@
       #define BTN_EN2           63
       #define BTN_ENC           59
 
-      #define SD_DETECT_PIN     49
-      #define KILL_PIN          64
-
+       #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
+      #define KILL_PIN          41
+      
     #elif ENABLED(ZONESTAR_LCD)
 
       #define ADC_KEYPAD_PIN    12
@@ -560,8 +581,13 @@
       #endif
 
       #if ENABLED(G3D_PANEL)
-        #define SD_DETECT_PIN   49
-        #define KILL_PIN        41
+         #if(ENABLED(BoardRev2))
+        #define SD_DETECT_PIN     49
+      #else
+        #define SD_DETECT_PIN     -1
+      #endif
+      #define KILL_PIN          41
+      
       #endif
 
     #endif