Batch 1

Marlin/Configuration.h

@@ -815,9 +815,7 @@
 #endif
 
 // Check for stuck or disconnected endstops during homing moves.
-#if DISABLED(TazPro, MiniV2)
-  #define DETECT_BROKEN_ENDSTOP
-#endif
+#define DETECT_BROKEN_ENDSTOP
 
 //=============================================================================
 //============================== Movement Settings ============================
@@ -1457,7 +1455,7 @@
  * Turn on with the command 'M111 S32'.
  * NOTE: Requires a lot of PROGMEM!
  */
-#define DEBUG_LEVELING_FEATURE
+//#define DEBUG_LEVELING_FEATURE
 
 #if ANY(MESH_BED_LEVELING, AUTO_BED_LEVELING_BILINEAR, AUTO_BED_LEVELING_UBL)
   // Gradually reduce leveling correction until a set height is reached,

platformio.ini

@@ -24,6 +24,7 @@ default_envs = Mini
   Workhorse
   TazPro
 include_dir  = Marlin
+
 #
 # The 'common' values are used for most Marlin builds
 #
@@ -52,12 +53,12 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
   -<src/lcd/menu/menu_touch_screen.cpp>
   -<src/lcd/menu/menu_ubl.cpp>
   -<src/lcd/extui/lib/mks_ui>
-  -<src/lcd/extui/lib/dgus> -<src/lcd/extui/dgus_lcd.cpp>
-  -<src/lcd/extui/example.cpp>
-  -<src/lcd/extui/malyan_lcd.cpp>
+  -<src/lcd/extui/lib/dgus> -<src/lcd/extui_dgus_lcd.cpp>
+  -<src/lcd/extui_example.cpp>
+  -<src/lcd/extui_malyan_lcd.cpp>
   -<src/lcd/extui/lib/ftdi_eve_touch_ui>
   -<src/lcd/extui/lib/anycubic_i3mega>
-  -<src/lcd/extui/anycubic_tft.cpp>
+  -<src/lcd/extui_anycubic_tft.cpp>
   -<src/lcd/lcdprint.cpp>
   -<src/sd/usb_flashdrive>
   -<src/feature/backlash.cpp>
@@ -156,6 +157,7 @@ default_src_filter = +<src/*> -<src/config> -<src/HAL> +<src/HAL/shared>
   -<src/gcode/host/M360.cpp>
   -<src/gcode/host/M876.cpp>
   -<src/gcode/lcd/M0_M1.cpp>
+  -<src/gcode/lcd/M145.cpp>
   -<src/gcode/lcd/M250.cpp>
   -<src/gcode/lcd/M73.cpp>
   -<src/gcode/lcd/M995.cpp>
@@ -243,11 +245,11 @@ HAS_MENU_TMC            = src_filter=+<src/lcd/menu/menu_tmc.cpp>
 HAS_MENU_TOUCH_SCREEN   = src_filter=+<src/lcd/menu/menu_touch_screen.cpp>
 HAS_MENU_UBL            = src_filter=+<src/lcd/menu/menu_ubl.cpp>
 ANYCUBIC_LCD_I3MEGA     = src_filter=+<src/lcd/extui/lib/anycubic_i3mega>
-HAS_DGUS_LCD            = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui/dgus_lcd.cpp>
+HAS_DGUS_LCD            = src_filter=+<src/lcd/extui/lib/dgus> +<src/lcd/extui_dgus_lcd.cpp>
 TOUCH_UI_FTDI_EVE       = src_filter=+<src/lcd/extui/lib/ftdi_eve_touch_ui>
-HAS_ANYCUBIC_TFT_EXTUI  = src_filter=+<src/lcd/extui/anycubic_tft.cpp>
-EXTUI_EXAMPLE           = src_filter=+<src/lcd/extui/example.cpp>
-MALYAN_LCD              = src_filter=+<src/lcd/extui/malyan_lcd.cpp>
+HAS_ANYCUBIC_TFT_EXTUI  = src_filter=+<src/lcd/extui_anycubic_tft.cpp>
+EXTUI_EXAMPLE           = src_filter=+<src/lcd/extui_example.cpp>
+MALYAN_LCD              = src_filter=+<src/lcd/extui_malyan_lcd.cpp>
 HAS_SPI_LCD             = src_filter=+<src/lcd/lcdprint.cpp>
 USB_FLASH_DRIVE_SUPPORT = src_filter=+<src/sd/usb_flashdrive>
 AUTO_BED_LEVELING_BILINEAR = src_filter=+<src/feature/bedlevel/abl>
@@ -292,7 +294,8 @@ MK2_MULTIPLEXER         = src_filter=+<src/feature/snmm.cpp>
 EXT_SOLENOID|MANUAL_SOLENOID_CONTROL = src_filter=+<src/feature/solenoid.cpp>
 HAS_CUTTER              = src_filter=+<src/feature/spindle_laser.cpp> +<src/gcode/control/M3-M5.cpp>
 EXPERIMENTAL_I2CBUS     = src_filter=+<src/feature/twibus.cpp> +<src/gcode/feature/i2c>
-MECHANICAL_GANTRY_CALIBRATION|Z_STEPPER_AUTO_ALIGN    = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
+Z_STEPPER_AUTO_ALIGN    = src_filter=+<src/feature/z_stepper_align.cpp> +<src/gcode/calibrate/G34_M422.cpp>
+MECHANICAL_GANTRY_CALIBRATION = src_filter=+<src/gcode/calibrate/G34_M422.cpp>
 G26_MESH_VALIDATION     = src_filter=+<src/gcode/bedlevel/G26.cpp>
 ASSISTED_TRAMMING       = src_filter=+<src/gcode/bedlevel/G35.cpp>
 HAS_MESH                = src_filter=+<src/gcode/bedlevel/G42.cpp>
@@ -332,6 +335,7 @@ HOST_KEEPALIVE_FEATURE  = src_filter=+<src/gcode/host/M113.cpp>
 REPETIER_GCODE_M360     = src_filter=+<src/gcode/host/M360.cpp>
 HAS_GCODE_M876          = src_filter=+<src/gcode/host/M876.cpp>
 HAS_RESUME_CONTINUE     = src_filter=+<src/gcode/lcd/M0_M1.cpp>
+HAS_PREHEAT_COUNT       = src_filter=+<src/gcode/lcd/M145.cpp>
 HAS_LCD_CONTRAST        = src_filter=+<src/gcode/lcd/M250.cpp>
 LCD_SET_PROGRESS_MANUALLY = src_filter=+<src/gcode/lcd/M73.cpp>
 TOUCH_SCREEN_CALIBRATION = src_filter=+<src/gcode/lcd/M995.cpp>