jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Add SKRE3Turbo

Browse Source
This commit is contained in:
InsanityAutomation
2021-04-03 12:33:42 -04:00
parent 9c5ee355e8
commit 2e6d7308f6
1 changed files with 36 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+36 -13
View File
@@ -73,6 +73,8 @@
//#define CrealityTitan
//#define DDXExtruderKit
//Stepper09Deg // 0.9 degree per step motor on the extruder - doubles ESteps
//#define MicroswissDirectDrive
//#define DirectDrive // Any direct drive extruder, reduces filament change lengths
@@ -104,7 +106,7 @@
*/
//#define OrigLCD // Upgraded mainboard with single cable Ender LCD
//#define GraphicLCD //Full graphics LCD for Ender 4, CR-X or CR10SPro
//#define GraphicLCD //Full graphics LCD for Ender 4, CR-X, Ender 5 Plus, or CR10SPro
//#define Big_UI // Lightweight status screen, saves CPU cycles
// Touchscreen options - only 32 bit boards have the open serial ports to use with graphics displays above
@@ -126,6 +128,9 @@
//#define CrealityViewerKit // Reduces baud to 115200 for Creality viewer kit
// use only if you have converted a 12 volt printer to use 24 volts AND you are using Trinamic drivers in UART
//#define Convert12to24
/*
Choose bed leveling type here
Requires a sensor from above
@@ -158,6 +163,8 @@
//#define SKR14
//#define SKR14Turbo
//#define SKRPRO11
//#define SKRE3Turbo
//#define SKR_Switch_Extruder_1 // Switch pins in PINS file for SKRE3Turbo
// This board is NOT recommended and is HIGHLY advised against utilizing the expanded builds for.
// The MCU is rated for 256kb and stability problems, including hangs with heaters on, have been reported.
@@ -325,6 +332,12 @@
#define OrigLCD
#endif
#if ENABLED(SKRE3Turbo)
#define SKR_2209
#define SKR_UART
#define OrigLCD
#endif
#if ENABLED(CrealityTitan)
#define E3DTitan
#endif
@@ -372,7 +385,7 @@
#if NONE(ABL_NCSW, ABL_EZABL, ABL_BLTOUCH)
#define ABL_BLTOUCH
#endif
#if NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2)
#if NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRE3Turbo, SKRMiniE3V2)
#define Y_STOP_PIN 14
#define X_STOP_PIN 3
#endif
@@ -435,7 +448,9 @@
#endif
#if ANY(MachineCRXPro, MachineEnder5Plus, MachineCR10SPro, MachineCR10Max )
#define Force10SProDisplay
#if NONE(GraphicLCD, OrigLCD)
#define Force10SProDisplay
#endif
#endif
#if ENABLED(MachineCRX)
@@ -533,7 +548,7 @@
*
* :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2)
#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, SKRE3Turbo)
#define SERIAL_PORT -1
#elif ANY(MachineEnder3V2, MachineEnder3Pro422, MachineEnder3Pro427)
#define SERIAL_PORT 1
@@ -547,11 +562,11 @@
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11) && (NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max) || (ENABLED(GraphicLCD) && NONE(Force10SProDisplay, ForceCRXDisplay)))
#if ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRE3Turbo) && (NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max) || (ENABLED(GraphicLCD) && NONE(Force10SProDisplay, ForceCRXDisplay)))
#define SERIAL_PORT_2 0
#elif ENABLED(SKRMiniE3V2)
#define SERIAL_PORT_2 2
#elif ANY(SKR13, SKR14, SKR14Turbo)
#elif ANY(SKR13, SKR14, SKR14Turbo, SKRE3Turbo)
#define LCD_SERIAL_PORT 0
#elif ANY(MachineEnder3Pro422, MachineEnder3Pro427)&& DISABLED(MachineEnder3V2)
#define SERIAL_PORT_2 3
@@ -587,6 +602,8 @@
#define MOTHERBOARD BOARD_BTT_SKR_PRO_V1_1
#elif ENABLED(SKRMiniE3V2)
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
#elif ENABLED(SKRE3Turbo)
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
#elif ANY(MachineEnder3Pro427, Creality427)
#define MOTHERBOARD BOARD_CREALITY_V427
#elif ANY(MachineEnder3V2, MachineEnder3Pro422, Creality422)
@@ -1308,7 +1325,7 @@
#define E1_DRIVER_TYPE TMC2208_STANDALONE
#endif
#endif
#elif ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2) && ENABLED(SKR_UART)
#elif ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRMiniE3V2, SKRE3Turbo) && ENABLED(SKR_UART)
#if ENABLED(SKR_2209)
#define X_DRIVER_TYPE TMC2209
#define Y_DRIVER_TYPE TMC2209
@@ -1438,7 +1455,13 @@
#define ZStepsmm 400
#endif
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, ZStepsmm, EStepsmm }
#if ENABLED(Stepper09Deg)
#define EstepMultiplier 2
#else
#define EstepMultiplier 1
#endif
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, ZStepsmm, (EStepsmm*EstepMultiplier) }
/**
* Default Max Feed Rate (mm/s)
@@ -1669,7 +1692,7 @@
#define PROBING_FANS_OFF // Turn fans off when probing
#endif
#if ENABLED(MachineEnder4) && NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11)
#if ENABLED(MachineEnder4) && NONE(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRE3Turbo)
#define SOLENOID_PROBE PIN_15
#endif
#endif
@@ -1868,7 +1891,7 @@
#define Z_PROBE_OFFSET_RANGE_MAX 9
// Enable the M48 repeatability test to test probe accuracy
#if ANY(ABL_EZABL, ABL_BLTOUCH, ABL_NCSW, ABL_TOUCH_MI) && NONE(MachineCR10Orig, SKRMiniE3V2)
#if ANY(ABL_EZABL, ABL_BLTOUCH, ABL_NCSW, ABL_TOUCH_MI) && NONE(MachineCR10Orig, SKRMiniE3V2, SKRE3Turbo)
#define Z_MIN_PROBE_REPEATABILITY_TEST
#endif
@@ -1939,7 +1962,7 @@
#define INVERT_E0_DIR true
#define INVERT_E1_DIR false
#endif
#elif ANY(MachineCR10Orig, SKR13, SKR14, SKR14Turbo, SKRMiniE3V2) && DISABLED(SKR_ReverseSteppers)
#elif ANY(MachineCR10Orig, SKR13, SKR14, SKR14Turbo, SKRMiniE3V2, SKRE3Turbo) && DISABLED(SKR_ReverseSteppers)
#define INVERT_X_DIR true
#define INVERT_Y_DIR true
#define INVERT_Z_DIR false
@@ -2192,7 +2215,7 @@
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
#define FIL_RUNOUT_ENABLED_DEFAULT true // Enable the sensor on startup. Override with M412 followed by M500.
#if ENABLED(DualFilSensors)
#if DISABLED(SKR13, SKR14, SKR14Turbo, SKRPRO11)
#if DISABLED(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRE3Turbo)
#define NUM_RUNOUT_SENSORS 2 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
#endif
#define FIL_RUNOUT2_PIN 15
@@ -3114,7 +3137,7 @@
#define MKS_MINI_12864
#elif ENABLED(MachineEnder3V2)
#define DWIN_CREALITY_LCD
#elif ANY(OrigLCD, MachineCR10Orig, MachineEnder3Pro422, MachineEnder3Pro427, SKRMiniE3V2) && DISABLED(GraphicLCD)
#elif ANY(OrigLCD, MachineCR10Orig, MachineEnder3Pro422, MachineEnder3Pro427, SKRMiniE3V2, SKRE3Turbo) && DISABLED(GraphicLCD)
#define CR10_STOCKDISPLAY
#elif NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, OrigLCD, MachineCR10Orig, SKRMiniE3V2) || ENABLED(GraphicLCD)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER