jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Move config to top

Browse Source
This commit is contained in:
InsanityAutomation
2018-07-01 00:13:37 -04:00
parent afa6a0c993
commit 5a4a107711
1 changed files with 47 additions and 43 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+47 -43
View File
@@ -1,3 +1,50 @@
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
/**
* Enable if you replace the stepper drivers with TMC 2208. Be sure to remove MS3 jumper
* underneath the stepper driver! Plug and Play will result in Stealth Chop 2 Mode enabled
* Stealthchop with 2208 on E will disabe inear Advance! Please enable stealthchop if
* you require Linear Advance with a TMC2208 on the extruder!
* If you have used a UART connection to program the driver to SpreadCycle mode, pease seect that as well
*/
//#define X_2208
//#define X_SpreadCycle
//#define Y_2208
//#define Y_SpreadCyclebed
//#define E_2208
//#define E_SpreadCycle
/**
* Enable if you install a KEENOVO AC BED with Solid State Relay
*/
//#define BED_AC
//#define HotendAllMetal
/**
* Enable if you install a filament runout sensor from www.formbotusa.com
*/
//#define RunoutSensor
/**
* Enable if you wish to change the auto level strategy to Unified Bed Leveling. Under CUSTOM COMMANDS, run Step 1 and 2 before setting Z Offset
*/
//#define UBL
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
/**
* Marlin 3D Printer Firmware
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
@@ -98,49 +145,6 @@
// @section machine
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
// CUSTOMIZE FOR YOUR MACHINE BELOW
/**
* Enable if you replace the stepper drivers with TMC 2208. Be sure to remove MS3 jumper
* underneath the stepper driver! Plug and Play will result in Stealth Chop 2 Mode enabled
* Stealthchop with 2208 on E will disabe inear Advance! Please enable stealthchop if
* you require Linear Advance with a TMC2208 on the extruder!
* If you have used a UART connection to program the driver to SpreadCycle mode, pease seect that as well
*/
//#define X_2208
//#define X_SpreadCycle
//#define Y_2208
//#define Y_SpreadCycle
//#define E_2208
//#define E_SpreadCycle
/**
* Enable if you install a KEENOVO AC BED with Solid State Relay
*/
//#define BED_AC
//#define HotendAllMetal
/**
* Enable if you install a filament runout sensor from www.formbotusa.com
*/
//#define RunoutSensor
/**
* Enable if you wish to change the auto level strategy to Unified Bed Leveling. Under CUSTOM COMMANDS, run Step 1 and 2 before setting Z Offset
*/
//#define UBL
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
//ONLY MAKE CHANGES ABOVE FOR RELIABLE FUNCTION
/**
* Select the serial port on the board to use for communication with the host.
* This allows the connection of wireless adapters (for instance) to non-default port pins.