jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

updates

Browse Source
This commit is contained in:
InsanityAutomation
2022-10-11 11:36:31 -04:00
parent d438436f0c
commit 5c0696b51a
3 changed files with 6 additions and 87 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+2 -2
View File
@@ -970,8 +970,8 @@
#define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
// is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
#endif
// @section safety
Marlin/Configuration_adv.h
+4 -4
View File
@@ -1465,13 +1465,13 @@
// Add the G-code 'M73' to set / report the current job progress
#define SET_PROGRESS_MANUALLY
#if ENABLED(SET_PROGRESS_MANUALLY)
//#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
//#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
#define SET_PROGRESS_PERCENT // Add 'P' parameter to set percentage done, otherwise use Marlin's estimate
#define SET_REMAINING_TIME // Add 'R' parameter to set remaining time, otherwise use Marlin's estimate
//#define SET_INTERACTION_TIME // Add 'C' parameter to set time until next filament change or other user interaction
#if ENABLED(SET_INTERACTION_TIME)
#define SHOW_INTERACTION_TIME // Display time until next user interaction ('C' = filament change)
#endif
//#define M73_REPORT // Report progress to host with 'M73'
#define M73_REPORT // Report progress to host with 'M73'
#endif
// LCD Print Progress options, multiple can be rotated depending on screen layout
@@ -2100,7 +2100,7 @@
#define LIN_ADVANCE_K 0.0 // Unit: mm compression per 1mm/s extruder speed
//#define LA_DEBUG // Print debug information to serial during operation. Disable for production use.
#define EXPERIMENTAL_SCURVE // Allow S-Curve Acceleration to be used with LA.
//#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
#define ALLOW_LOW_EJERK // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
//#define EXPERIMENTAL_I2S_LA // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
#endif
Marlin/src/gcode/feature/runout/M412.cpp
-81
View File
@@ -1,81 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#include "../../../inc/MarlinConfig.h"
#if HAS_FILAMENT_SENSOR
#include "../../gcode.h"
#include "../../../feature/runout.h"
/**
* M412: Enable / Disable filament runout detection
*
* Parameters
* R : Reset the runout sensor
* S<bool> : Reset and enable/disable the runout sensor
* H<bool> : Enable/disable host handling of filament runout
* D<linear> : Extra distance to continue after runout is triggered
*/
void GcodeSuite::M412() {
if (parser.seen("RS"
TERN_(HAS_FILAMENT_RUNOUT_DISTANCE, "D")
TERN_(HOST_ACTION_COMMANDS, "H")
)) {
#if ENABLED(HOST_ACTION_COMMANDS)
if (parser.seen('H')) runout.host_handling = parser.value_bool();
#endif
const bool seenR = parser.seen_test('R'), seenS = parser.seen('S');
if (seenR || seenS) runout.reset();
if (seenS) runout.enabled = parser.value_bool();
#if HAS_FILAMENT_RUNOUT_DISTANCE
if (parser.seenval('D')) runout.set_runout_distance(parser.value_linear_units());
#endif
}
else {
SERIAL_ECHO_START();
SERIAL_ECHOPGM("Filament runout ");
serialprint_onoff(runout.enabled);
#if HAS_FILAMENT_RUNOUT_DISTANCE
SERIAL_ECHOPGM(" ; Distance ", runout.runout_distance(), "mm");
#endif
#if ENABLED(HOST_ACTION_COMMANDS)
SERIAL_ECHOPGM(" ; Host handling ");
serialprint_onoff(runout.host_handling);
#endif
SERIAL_EOL();
}
}
void GcodeSuite::M412_report(const bool forReplay/*=true*/) {
report_heading_etc(forReplay, F(STR_FILAMENT_RUNOUT_SENSOR));
SERIAL_ECHOPGM(
" M412 S", runout.enabled
#if HAS_FILAMENT_RUNOUT_DISTANCE
, " D", LINEAR_UNIT(runout.runout_distance())
#endif
, " ; Sensor "
);
serialprintln_onoff(runout.enabled);
}
#endif // HAS_FILAMENT_SENSOR