jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

CR-X Configuration for purge bucket

Browse Source
This commit is contained in:
BDScripting
2022-02-26 09:51:19 -06:00
parent b589cac5ff
commit 5c59a3d7c7
2 changed files with 13 additions and 13 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+6 -6
View File
@@ -145,7 +145,7 @@
//#define DualFilSensors //Using dual filament sensors on XMax and YMAX
//#define FilamentEncoder //Using filamet jam sensor such as the Bigtreetech Encoder wheel
//#define PurgeBucket //Adds automatic wiping on tool change if purge bucket is installed
#define PurgeBucket //Adds automatic wiping on tool change if purge bucket is installed
// Advanced options - Not for most users
@@ -2564,7 +2564,7 @@
#define X_BED_SIZE 300
#define Y_BED_SIZE 300
#define Z_MAX_POS 400
#define X_MAX_POS 315
#define X_MAX_POS 318
#define Y_MAX_POS 308
#define ClipClearance 15
#elif ENABLED(MachineCR10SProV2)
@@ -3226,10 +3226,10 @@
#if(ENABLED(MachineEnder2))
#define NOZZLE_PARK_POINT { (0), (0), 10 }
#else
#define NOZZLE_PARK_POINT { (50), (10), 10 }
#define NOZZLE_PARK_POINT { (10), (10), 10 }
#endif
//#define NOZZLE_PARK_X_ONLY // X move only is required to park
#define NOZZLE_PARK_X_ONLY // X move only is required to park
//#define NOZZLE_PARK_Y_ONLY // Y move only is required to park
#define NOZZLE_PARK_Z_RAISE_MIN 2 // (mm) Always raise Z by at least this distance
#define NOZZLE_PARK_XY_FEEDRATE 50 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
@@ -3303,11 +3303,11 @@
#define NOZZLE_CLEAN_NO_Z
// For a purge/clean station mounted on the X axis
//#define NOZZLE_CLEAN_NO_Y
#define NOZZLE_CLEAN_NO_Y
// Require a minimum hotend temperature for cleaning
#define NOZZLE_CLEAN_MIN_TEMP 170
//#define NOZZLE_CLEAN_HEATUP // Heat up the nozzle instead of skipping wipe
#define NOZZLE_CLEAN_HEATUP // Heat up the nozzle instead of skipping wipe
// Explicit wipe G-code script applies to a G12 with no arguments.
//#define WIPE_SEQUENCE_COMMANDS "G1 X-17 Y25 Z10 F4000\nG1 Z1\nM114\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 X-17 Y25\nG1 X-17 Y95\nG1 Z15\nM400\nG0 X-10.0 Y-9.0"
Marlin/Configuration_adv.h
+7 -7
View File
@@ -821,7 +821,7 @@
//#define SENSORLESS_BACKOFF_MM { 2, 2, 0 } // (mm) Backoff from endstops before sensorless homing
#define HOMING_BUMP_MM { 8, 8, 2 } // (mm) Backoff from endstops after first bump
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
#define HOMING_BUMP_DIVISOR { 2, 2, 8 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
#define HOMING_BACKOFF_POST_MM { 8, 8, 2 } // (mm) Backoff from endstops after homing
@@ -2445,18 +2445,18 @@
#define TOOLCHANGE_FILAMENT_SWAP
#if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
// Load / Unload
#define TOOLCHANGE_FS_LENGTH 80 // (mm) Load / Unload length
#define TOOLCHANGE_FS_LENGTH 100 // (mm) Load / Unload length
#define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH 0 // (mm) Extra length for better restart, fine tune by LCD/Gcode)
#define TOOLCHANGE_FS_RETRACT_SPEED (50*60) // (mm/min) (Unloading)
#define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/min) (On SINGLENOZZLE or Bowden loading must be slowed down)
// Longer prime to clean out a SINGLENOZZLE
#define TOOLCHANGE_FS_EXTRA_PRIME 2 // (mm) Extra priming length
#define TOOLCHANGE_FS_EXTRA_PRIME 40 // (mm) Extra priming length
#define TOOLCHANGE_FS_PRIME_SPEED (4.6*60) // (mm/min) Extra priming feedrate
#define TOOLCHANGE_FS_WIPE_RETRACT 0 // (mm/min) Retract before cooling for less stringing, better wipe, etc.
#define TOOLCHANGE_FS_WIPE_RETRACT 4 // (mm/min) Retract before cooling for less stringing, better wipe, etc.
// Cool after prime to reduce stringing
#define TOOLCHANGE_FS_FAN -1 // Fan index or -1 to skip
#define TOOLCHANGE_FS_FAN 0 // Fan index or -1 to skip
#define TOOLCHANGE_FS_FAN_SPEED 255 // 0-255
#define TOOLCHANGE_FS_FAN_TIME 10 // (seconds)
@@ -2466,7 +2466,7 @@
// Prime on the first T0 (If other, TOOLCHANGE_FS_INIT_BEFORE_SWAP applied)
// Enable it (M217 V[0/1]) before printing, to avoid unwanted priming on host connect
//#define TOOLCHANGE_FS_PRIME_FIRST_USED
#define TOOLCHANGE_FS_PRIME_FIRST_USED
/**
* Tool Change Migration
@@ -2490,7 +2490,7 @@
#if ENABLED(TOOLCHANGE_PARK)
#define TOOLCHANGE_PARK_XY { X_MAX_POS, Y_MIN_POS + 10 }
#define TOOLCHANGE_PARK_XY_FEEDRATE 6000 // (mm/m)
//#define TOOLCHANGE_PARK_X_ONLY // X axis only move
#define TOOLCHANGE_PARK_X_ONLY // X axis only move
//#define TOOLCHANGE_PARK_Y_ONLY // Y axis only move
#endif
#endif // HAS_MULTI_EXTRUDER