Bump to head and more complete trex3 support
This commit is contained in:
InsanityAutomation
+1
-2
@@ -29,9 +29,8 @@ before_install:
|
||||
#
|
||||
# Publish the buildroot script folder
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${PATH}
|
||||
- chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
|
||||
- export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
|
||||
|
||||
install:
|
||||
#- pip install -U platformio
|
||||
|
||||
+54
-25
@@ -26,8 +26,8 @@
|
||||
|
||||
//#define X_2208
|
||||
//#define X_Spreadcycle
|
||||
#define Y_2208 // Highly recommended as large prints with high mass can cause layer shifts with stealthchop at high speed
|
||||
#define Y_Spreadcycle
|
||||
//#define Y_2208 // Highly recommended as large prints with high mass can cause layer shifts with stealthchop at high speed
|
||||
//#define Y_Spreadcycle
|
||||
//#define Z_2208 // NOT Recommended! Dual stepper current draw is above the recommended limit for this driver
|
||||
//#define Y_Spreadcycle
|
||||
//#define E_2208 // Not Recommended! Stealthchop mode faults with linear advance
|
||||
@@ -40,7 +40,7 @@
|
||||
/*
|
||||
* Enables a filament sensor plugged into the laser pin. Disables the laser
|
||||
*/
|
||||
#define FilamentSensor // Standard older TM3D runout sensor
|
||||
//#define FilamentSensor // Standard older TM3D runout sensor
|
||||
//#define lerdgeFilSensor // Newer inverted logic TM3D Runout Sensor
|
||||
|
||||
|
||||
@@ -176,7 +176,11 @@
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
#define CUSTOM_MACHINE_NAME "TM3D T-REX 2+"
|
||||
#if ENABLED(TREX3)
|
||||
#define CUSTOM_MACHINE_NAME "TM3D T-REX 3"
|
||||
#else
|
||||
#define CUSTOM_MACHINE_NAME "TM3D T-REX 2+"
|
||||
#endif
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
@@ -278,6 +282,11 @@
|
||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
#if ENABLED(TREX3)
|
||||
#define HOTEND_OFFSET_X {0.0, 438.5} // (mm) relative X-offset for each nozzle
|
||||
#else
|
||||
#define HOTEND_OFFSET_X {0.0, 442.0} // (mm) relative X-offset for each nozzle
|
||||
#endif
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
@@ -702,19 +711,31 @@
|
||||
*/
|
||||
|
||||
|
||||
#if(ENABLED(Y_2208))
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 93 }
|
||||
#if(ENABLED(Y_2208))
|
||||
#define Y_STEPSMM 80
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 }
|
||||
#define Y_STEPSMM 160
|
||||
#endif
|
||||
|
||||
#if(ENABLED(Z_2208))
|
||||
#define Z_STEPSMM 800
|
||||
#else
|
||||
#define Z_STEPSMM 1600
|
||||
#endif
|
||||
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, Y_STEPSMM, Z_STEPSMM, 93 }
|
||||
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 }
|
||||
#if ENABLED(Y_2208) && DISABLED(Y_Spreadcycle)
|
||||
#define Y_MAXFEED 100
|
||||
#else
|
||||
#define Y_MAXFEED 150
|
||||
#endif
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, Y_MAXFEED, 5, 25 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
@@ -861,12 +882,18 @@
|
||||
* O-- FRONT --+
|
||||
* (0,0)
|
||||
*/
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -7 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 29 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle]
|
||||
|
||||
#if ENABLED(TREX3)
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -3 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 31 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.25 // Z offset: -below +above [the nozzle]
|
||||
#else
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -7 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 29 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle]
|
||||
#endif
|
||||
// Certain types of probes need to stay away from edges
|
||||
#define MIN_PROBE_EDGE 10
|
||||
#define MIN_PROBE_EDGE 3
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 8000
|
||||
@@ -899,7 +926,7 @@
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -3 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
@@ -952,12 +979,12 @@
|
||||
// @section machine
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#if(ENABLED(X_2208))
|
||||
#if ENABLED(X_2208)
|
||||
#define INVERT_X_DIR true
|
||||
#else
|
||||
#define INVERT_X_DIR false
|
||||
#endif
|
||||
#if(ENABLED(Y_2208))
|
||||
#if ENABLED(Y_2208)
|
||||
#define INVERT_Y_DIR true
|
||||
#else
|
||||
#define INVERT_Y_DIR false
|
||||
@@ -1052,7 +1079,7 @@
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
* By default the firmware assumes HIGH=FILAMENT PRESENT.
|
||||
*/
|
||||
#if(ENABLED(FilamentSensor))
|
||||
#if ENABLED(FilamentSensor)
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#endif
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
@@ -1061,14 +1088,16 @@
|
||||
#else
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#endif
|
||||
#if ENABLED(lerdgeFilSensor)
|
||||
#if ENABLED(lerdgeFilSensor) || ENABLED(TREX3)
|
||||
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
|
||||
#else
|
||||
#define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor.
|
||||
#endif
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
|
||||
#define FIL_RUNOUT_PIN 4
|
||||
#if DISABLED(TREX3)
|
||||
#define FIL_RUNOUT_PIN 4
|
||||
#endif
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
|
||||
// After a runout is detected, continue printing this length of filament
|
||||
@@ -1150,8 +1179,8 @@
|
||||
// For Cartesian machines, instead of dividing moves on mesh boundaries,
|
||||
// split up moves into short segments like a Delta. This follows the
|
||||
// contours of the bed more closely than edge-to-edge straight moves.
|
||||
#define SEGMENT_LEVELED_MOVES
|
||||
#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
//#define SEGMENT_LEVELED_MOVES
|
||||
//#define LEVELED_SEGMENT_LENGTH 5.0 // (mm) Length of all segments (except the last one)
|
||||
|
||||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
@@ -1207,7 +1236,7 @@
|
||||
|
||||
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 30 // Set Mesh bounds as an inset region of the bed
|
||||
#define MESH_INSET 5 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 15 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
@@ -1236,12 +1265,12 @@
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
#define PROBE_PT_1_X 30
|
||||
#define PROBE_PT_1_X 40
|
||||
#define PROBE_PT_1_Y 365
|
||||
#define PROBE_PT_2_X 30
|
||||
#define PROBE_PT_2_Y 30
|
||||
#define PROBE_PT_2_X 40
|
||||
#define PROBE_PT_2_Y 40
|
||||
#define PROBE_PT_3_X 365
|
||||
#define PROBE_PT_3_Y 30
|
||||
#define PROBE_PT_3_Y 40
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
||||
+60
-27
@@ -220,7 +220,7 @@
|
||||
* Define one or both of these to override the default 0-255 range.
|
||||
*/
|
||||
#define FAN_MIN_PWM 64
|
||||
//#define FAN_MAX_PWM 128
|
||||
//#define FAN_MAX_PWM 255
|
||||
|
||||
// @section extruder
|
||||
|
||||
@@ -236,8 +236,14 @@
|
||||
* Multiple extruders can be assigned to the same pin in which case
|
||||
* the fan will turn on when any selected extruder is above the threshold.
|
||||
*/
|
||||
#define E0_AUTO_FAN_PIN -1
|
||||
#define E1_AUTO_FAN_PIN -1
|
||||
#if ENABLED(TREX3)
|
||||
#define E0_AUTO_FAN_PIN 6
|
||||
#define E1_AUTO_FAN_PIN 45
|
||||
#else
|
||||
#define E0_AUTO_FAN_PIN -1
|
||||
#define E1_AUTO_FAN_PIN -1
|
||||
#endif
|
||||
|
||||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
@@ -245,7 +251,6 @@
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
|
||||
|
||||
/**
|
||||
* Part-Cooling Fan Multiplexer
|
||||
*
|
||||
@@ -262,7 +267,9 @@
|
||||
*/
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
#define CASE_LIGHT_PIN 8
|
||||
#if DISABLED(TREX3)
|
||||
#define CASE_LIGHT_PIN 8
|
||||
#endif
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
@@ -364,7 +371,12 @@
|
||||
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
#define X2_MAX_POS 442 // set maximum to the distance between toolheads when both heads are homed
|
||||
// set maximum to the distance between toolheads when both heads are homed
|
||||
#if ENABLED(TREX3)
|
||||
#define X2_MAX_POS 438.5
|
||||
#else
|
||||
#define X2_MAX_POS 442
|
||||
#endif
|
||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
|
||||
@@ -485,7 +497,7 @@
|
||||
//
|
||||
// Use Junction Deviation instead of traditional Jerk Limiting
|
||||
//
|
||||
//#define JUNCTION_DEVIATION
|
||||
#define JUNCTION_DEVIATION
|
||||
#if ENABLED(JUNCTION_DEVIATION)
|
||||
#define JUNCTION_DEVIATION_MM 0.02 // (mm) Distance from real junction edge
|
||||
#endif
|
||||
@@ -575,10 +587,10 @@
|
||||
#define LCD_INFO_MENU
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
@@ -883,10 +895,29 @@
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
//#define MESH_MIN_Y MESH_INSET
|
||||
//#define MESH_MAX_X X_BED_SIZE - (MESH_INSET)
|
||||
//#define MESH_MAX_Y Y_BED_SIZE - (MESH_INSET)
|
||||
#if( (X_PROBE_OFFSET_FROM_EXTRUDER + 10) > 0 )
|
||||
#define MESH_MIN_X (X_PROBE_OFFSET_FROM_EXTRUDER + 5)
|
||||
#else
|
||||
#define MESH_MIN_X 10
|
||||
#endif
|
||||
|
||||
#if( (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 10) < X_BED_SIZE)
|
||||
#define MESH_MAX_X (X_BED_SIZE + X_PROBE_OFFSET_FROM_EXTRUDER - 5)
|
||||
#else
|
||||
#define MESH_MAX_X (X_BED_SIZE - 10)
|
||||
#endif
|
||||
|
||||
#if ( (Y_PROBE_OFFSET_FROM_EXTRUDER + 10) > 5 )
|
||||
#define MESH_MIN_Y (Y_PROBE_OFFSET_FROM_EXTRUDER + 10)
|
||||
#else
|
||||
#define MESH_MIN_Y 25
|
||||
#endif
|
||||
|
||||
#if( (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 10) < Y_BED_SIZE)
|
||||
#define MESH_MAX_Y (Y_BED_SIZE + Y_PROBE_OFFSET_FROM_EXTRUDER - 10)
|
||||
#else
|
||||
#define MESH_MAX_Y (Y_BED_SIZE - 10)
|
||||
#endif
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -918,7 +949,7 @@
|
||||
//
|
||||
// G2/G3 Arc Support
|
||||
//
|
||||
//#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
|
||||
#define ARC_SUPPORT // Disable this feature to save ~3226 bytes
|
||||
#if ENABLED(ARC_SUPPORT)
|
||||
#define MM_PER_ARC_SEGMENT 1 // Length of each arc segment
|
||||
#define N_ARC_CORRECTION 25 // Number of intertpolated segments between corrections
|
||||
@@ -927,7 +958,7 @@
|
||||
#endif
|
||||
|
||||
// Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
|
||||
//#define BEZIER_CURVE_SUPPORT
|
||||
#define BEZIER_CURVE_SUPPORT
|
||||
|
||||
// G38.2 and G38.3 Probe Target
|
||||
// Set MULTIPLE_PROBING if you want G38 to double touch
|
||||
@@ -1162,7 +1193,7 @@
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_DELAY 2000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 1 // Number of alert beeps to play when a response is needed.
|
||||
@@ -1550,17 +1581,19 @@
|
||||
*
|
||||
* See http://marlinfw.org/docs/configuration/laser_spindle.html for more config details.
|
||||
*/
|
||||
//#define SPINDLE_LASER_ENABLE
|
||||
#if ENABLED(TREX3)
|
||||
#define SPINDLE_LASER_ENABLE
|
||||
#endif
|
||||
#if ENABLED(SPINDLE_LASER_ENABLE)
|
||||
|
||||
#define SPINDLE_LASER_ENABLE_INVERT false // set to "true" if the on/off function is reversed
|
||||
#define SPINDLE_LASER_PWM true // set to true if your controller supports setting the speed/power
|
||||
#define SPINDLE_LASER_ENABLE_INVERT true // set to "true" if the on/off function is reversed
|
||||
#define SPINDLE_LASER_PWM false // set to true if your controller supports setting the speed/power
|
||||
#define SPINDLE_LASER_PWM_INVERT true // set to "true" if the speed/power goes up when you want it to go slower
|
||||
#define SPINDLE_LASER_POWERUP_DELAY 5000 // delay in milliseconds to allow the spindle/laser to come up to speed/power
|
||||
#define SPINDLE_LASER_POWERDOWN_DELAY 5000 // delay in milliseconds to allow the spindle to stop
|
||||
#define SPINDLE_DIR_CHANGE true // set to true if your spindle controller supports changing spindle direction
|
||||
#define SPINDLE_LASER_POWERUP_DELAY 1 // delay in milliseconds to allow the spindle/laser to come up to speed/power
|
||||
#define SPINDLE_LASER_POWERDOWN_DELAY 1 // delay in milliseconds to allow the spindle to stop
|
||||
#define SPINDLE_DIR_CHANGE false // set to true if your spindle controller supports changing spindle direction
|
||||
#define SPINDLE_INVERT_DIR false
|
||||
#define SPINDLE_STOP_ON_DIR_CHANGE true // set to true if Marlin should stop the spindle before changing rotation direction
|
||||
#define SPINDLE_STOP_ON_DIR_CHANGE false // set to true if Marlin should stop the spindle before changing rotation direction
|
||||
|
||||
/**
|
||||
* The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
|
||||
@@ -1582,7 +1615,7 @@
|
||||
//#define SPEED_POWER_MAX 100 // 0-100%
|
||||
#endif
|
||||
|
||||
#if(DISABLED(FilamentSensor))
|
||||
#if DISABLED(FilamentSensor) && DISABLED(TREX3)
|
||||
#define FAN_AS_LASER
|
||||
#endif
|
||||
#if ENABLED(FAN_AS_LASER)
|
||||
@@ -1635,7 +1668,7 @@
|
||||
/**
|
||||
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
|
||||
*/
|
||||
//#define PINS_DEBUGGING
|
||||
#define PINS_DEBUGGING
|
||||
|
||||
/**
|
||||
* Auto-report temperatures with M155 S<seconds>
|
||||
@@ -1723,10 +1756,10 @@
|
||||
#define USER_SCRIPT_AUDIBLE_FEEDBACK
|
||||
#define USER_SCRIPT_RETURN // Return to status screen after a script
|
||||
|
||||
#define USER_DESC_1 "UBL Commission Step 1"
|
||||
#define USER_DESC_1 "UBL Commission 1"
|
||||
#define USER_GCODE_1 "M502 \n M500 \n M501 \n T0 \n M190 S75 \n M106 S128 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
|
||||
|
||||
#define USER_DESC_2 "UBL Commission Step 2"
|
||||
#define USER_DESC_2 "UBL Commission 2"
|
||||
#define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n T0 \n M106 S128 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
|
||||
|
||||
#define USER_DESC_3 "Prep for Z Adjust"
|
||||
|
||||
+245
-159
@@ -89,8 +89,8 @@ WIRE ?= 0
|
||||
# this defines if U8GLIB is needed (may require RELOC_WORKAROUND)
|
||||
U8GLIB ?= 1
|
||||
|
||||
# this defines whether to include the Trinamic TMC2630Stepper
|
||||
TMC2630 ?= 1
|
||||
# this defines whether to include the Trinamic TMCStepper library
|
||||
TMC ?= 1
|
||||
|
||||
############
|
||||
# Try to automatically determine whether RELOC_WORKAROUND is needed based
|
||||
@@ -103,7 +103,7 @@ CC_PATCHLEVEL:=$(shell $(CC) -dM -E - < /dev/null | grep __GNUC_PATCHLEVEL__ | c
|
||||
CC_VER:=$(shell echo $$(( $(CC_MAJ) * 10000 + $(CC_MIN) * 100 + $(CC_PATCHLEVEL) )))
|
||||
ifeq ($(shell test $(CC_VER) -lt 40901 && echo 1),1)
|
||||
@echo This version of GCC is likely broken. Enabling relocation workaround.
|
||||
RELOC_WORKAROUND = 1
|
||||
RELOC_WORKAROUND = 1
|
||||
endif
|
||||
|
||||
############################################################################
|
||||
@@ -195,7 +195,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),49)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),7)
|
||||
# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),71)
|
||||
MCU ?= atmega1280
|
||||
MCU ?= atmega1280
|
||||
# Azteeg X3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),67)
|
||||
# Azteeg X3 Pro
|
||||
@@ -204,6 +204,16 @@ else ifeq ($(HARDWARE_MOTHERBOARD),68)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),72)
|
||||
# Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),80)
|
||||
# Raise3D Rumba
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),333)
|
||||
# Formbot T-Rex 2 Plus
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),95)
|
||||
# Formbot T-Rex 3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),96)
|
||||
# Formbot Raptor
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),97)
|
||||
# Formbot Raptor 2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),98)
|
||||
# bq ZUM Mega 3D
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),503)
|
||||
# MakeBoard Mini v2.1.2 is a control board sold by MicroMake
|
||||
@@ -214,6 +224,10 @@ else ifeq ($(HARDWARE_MOTHERBOARD),343)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),443)
|
||||
# Creality: Ender-4, CR-8
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),243)
|
||||
# Creality: CR10S, CR20, CR-X
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),244)
|
||||
# Fysetc F6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),541)
|
||||
|
||||
#
|
||||
# Other ATmega1280, ATmega2560
|
||||
@@ -265,9 +279,9 @@ else ifeq ($(HARDWARE_MOTHERBOARD),75)
|
||||
#
|
||||
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),702)
|
||||
MCU ?= atmega1281
|
||||
MCU ?= atmega1281
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),25)
|
||||
MCU ?= atmega1281
|
||||
MCU ?= atmega1281
|
||||
|
||||
#
|
||||
# Sanguinololu and Derivatives - ATmega644P, ATmega1284P
|
||||
@@ -275,44 +289,44 @@ MCU ?= atmega1281
|
||||
|
||||
# Sanguinololu < 1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),6)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Sanguinololu 1.2 and above
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),62)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Melzi
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),63)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Melzi with ATmega1284 (MaKr3d version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),66)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Melzi Creality3D board (for CR-10 etc)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),89)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Melzi Malyan M150 board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),92)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Tronxy X5S
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),505)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# STB V1.1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),64)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Azteeg X1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),65)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
# Anet 1.0 (Melzi clone)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),69)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega1284p
|
||||
|
||||
#
|
||||
# Other ATmega644P, ATmega644, ATmega1284P
|
||||
@@ -320,52 +334,52 @@ MCU ?= atmega1284p
|
||||
|
||||
# Gen3 Monolithic Electronics
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),22)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Gen3+
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),9)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Gen6
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),5)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
# Gen6 deluxe
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),51)
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Gen6
|
||||
MCU ?= atmega644p
|
||||
# Gen7 custom (Alfons3 Version)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),10)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644
|
||||
F_CPU ?= 20000000
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.1, v1.2
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),11)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.3
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),12)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega644p
|
||||
F_CPU ?= 20000000
|
||||
# Gen7 v1.4
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),13)
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega1284p
|
||||
F_CPU ?= 20000000
|
||||
HARDWARE_VARIANT ?= Gen7
|
||||
MCU ?= atmega1284p
|
||||
F_CPU ?= 20000000
|
||||
# Alpha OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),90)
|
||||
HARDWARE_VARIANT ?= SanguinoA
|
||||
MCU ?= atmega644
|
||||
HARDWARE_VARIANT ?= SanguinoA
|
||||
MCU ?= atmega644
|
||||
# Final OMCA board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),91)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
# Sethi 3D_1
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),20)
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
HARDWARE_VARIANT ?= Sanguino
|
||||
MCU ?= atmega644p
|
||||
|
||||
#
|
||||
# Teensyduino - AT90USB1286, AT90USB1286P
|
||||
@@ -373,37 +387,49 @@ MCU ?= atmega644p
|
||||
|
||||
# Teensylu
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),8)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Printrboard (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),81)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Printrboard Revision F (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),811)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Brainwave (AT90USB646)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),82)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb646
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb646
|
||||
# Brainwave Pro (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),83)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# SAV Mk-I (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),84)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# Teensy++2.0 (AT90USB1286)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),85)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
# 5DPrint D8 Driver Board
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),88)
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
HARDWARE_VARIANT ?= Teensy
|
||||
MCU ?= at90usb1286
|
||||
|
||||
# UltiMachine Archim1 (with DRV8825 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1591)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
IS_MCU = 0
|
||||
# UltiMachine Archim2 (with TMC2130 drivers)
|
||||
else ifeq ($(HARDWARE_MOTHERBOARD),1592)
|
||||
HARDWARE_VARIANT ?= archim
|
||||
MCPU = cortex-m3
|
||||
F_CPU = 84000000L
|
||||
IS_MCU = 0
|
||||
endif
|
||||
|
||||
# Be sure to regenerate speed_lookuptable.h with create_speed_lookuptable.py
|
||||
@@ -411,9 +437,22 @@ endif
|
||||
# Set to 16Mhz if not yet set.
|
||||
F_CPU ?= 16000000
|
||||
|
||||
# Set to arduino, ATmega2560 if not yet set.
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
# Set to microcontroller if IS_MCU not yet set
|
||||
IS_MCU ?= 1
|
||||
|
||||
ifeq ($(IS_MCU),1)
|
||||
# Set to arduino, ATmega2560 if not yet set.
|
||||
HARDWARE_VARIANT ?= arduino
|
||||
MCU ?= atmega2560
|
||||
|
||||
TOOL_PREFIX = avr
|
||||
MCU_FLAGS = -mmcu=$(MCU)
|
||||
SIZE_FLAGS = --mcu=$(MCU) -C
|
||||
else
|
||||
TOOL_PREFIX = arm-none-eabi
|
||||
CPU_FLAGS = -mthumb -mcpu=$(MCPU)
|
||||
SIZE_FLAGS = -A
|
||||
endif
|
||||
|
||||
# Arduino contained the main source code for the Arduino
|
||||
# Libraries, the "hardware variant" are for boards
|
||||
@@ -434,19 +473,19 @@ VPATH = .
|
||||
VPATH += $(BUILD_DIR)
|
||||
VPATH += $(HARDWARE_SRC)
|
||||
|
||||
# U8glib
|
||||
VPATH += $(ARDUINO_USER_DIR)/libraries/U8glib
|
||||
VPATH += $(ARDUINO_USER_DIR)/libraries/U8glib/clib
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), $(filter $(HARDWARE_VARIANT),arduino Teensy Sanguino))
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/LiquidCrystal/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/libraries/SPI
|
||||
endif
|
||||
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
|
||||
ifeq ($(IS_MCU),1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/cores/arduino
|
||||
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SoftwareSerial/src
|
||||
endif
|
||||
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/libraries/SPI/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/LiquidCrystal/src
|
||||
ifeq ($(LIQUID_TWI2), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Wire
|
||||
@@ -462,71 +501,90 @@ VPATH += $(ARDUINO_INSTALL_DIR)/libraries/Adafruit_NeoPixel
|
||||
endif
|
||||
ifeq ($(U8GLIB), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/clib
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/csrc
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/cppsrc
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/U8glib/fntsrc
|
||||
endif
|
||||
ifeq ($(TMC2630), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMC2130Stepper/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMC2130Stepper/src/source
|
||||
ifeq ($(TMC), 1)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/libraries/TMCStepper/src/source
|
||||
endif
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), arduino)
|
||||
HARDWARE_SUB_VARIANT ?= mega
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
|
||||
HARDWARE_SUB_VARIANT ?= mega
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/arduino/avr/variants/$(HARDWARE_SUB_VARIANT)
|
||||
else ifeq ($(HARDWARE_VARIANT), Sanguino)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
|
||||
else ifeq ($(HARDWARE_VARIANT), archim)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/libsam
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/CMSIS/Include/
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/system/CMSIS/Device/ATMEL/
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/avr
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/cores/arduino/USB
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/Wire/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/SPI/src
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/libraries/U8glib/src/clib
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim
|
||||
LDSCRIPT = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/linker_scripts/gcc/flash.ld
|
||||
LDLIBS = $(ARDUINO_INSTALL_DIR)/packages/ultimachine/hardware/sam/1.6.9-b/variants/archim/libsam_sam3x8e_gcc_rel.a
|
||||
else
|
||||
ifeq ($(HARDWARE_VARIANT), Sanguino)
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/marlin/avr/variants/sanguino
|
||||
else
|
||||
HARDWARE_SUB_VARIANT ?= standard
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
|
||||
endif
|
||||
HARDWARE_SUB_VARIANT ?= standard
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/$(HARDWARE_VARIANT)/variants/$(HARDWARE_SUB_VARIANT)
|
||||
endif
|
||||
|
||||
LIB_SRC = wiring.c \
|
||||
wiring_analog.c wiring_digital.c \
|
||||
wiring_pulse.c \
|
||||
wiring_shift.c WInterrupts.c hooks.c
|
||||
wiring_analog.c wiring_digital.c \
|
||||
wiring_shift.c WInterrupts.c hooks.c
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), archim)
|
||||
LIB_ASRC += wiring_pulse_asm.S
|
||||
else
|
||||
LIB_SRC += wiring_pulse.c
|
||||
endif
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
LIB_SRC = wiring.c
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
|
||||
LIB_SRC = wiring.c
|
||||
VPATH += $(ARDUINO_INSTALL_DIR)/hardware/teensy/cores/teensy
|
||||
endif
|
||||
|
||||
LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp Tone.cpp
|
||||
LIB_CXXSRC = WMath.cpp WString.cpp Print.cpp SPI.cpp
|
||||
|
||||
ifeq ($(NEOPIXEL), 1)
|
||||
LIB_CXXSRC += Adafruit_NeoPixel.cpp
|
||||
LIB_CXXSRC += Adafruit_NeoPixel.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(LIQUID_TWI2), 0)
|
||||
LIB_CXXSRC += LiquidCrystal.cpp
|
||||
LIB_CXXSRC += LiquidCrystal.cpp
|
||||
else
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp LiquidTWI2.cpp
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp LiquidTWI2.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(WIRE), 1)
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp
|
||||
LIB_SRC += twi.c
|
||||
LIB_CXXSRC += Wire.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(U8GLIB), 1)
|
||||
LIB_CXXSRC += U8glib.cpp
|
||||
LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_data.c
|
||||
LIB_CXXSRC += U8glib.cpp
|
||||
LIB_SRC += u8g_ll_api.c u8g_bitmap.c u8g_clip.c u8g_com_null.c u8g_delay.c u8g_page.c u8g_pb.c u8g_pb16h1.c u8g_rect.c u8g_state.c u8g_font.c u8g_font_6x13.c u8g_font_04b_03.c u8g_font_5x8.c
|
||||
endif
|
||||
|
||||
ifeq ($(TMC2630), 1)
|
||||
LIB_CXXSRC += TMC2130Stepper.cpp TMC2130Stepper_COOLCONF.cpp TMC2130Stepper_DRV_STATUS.cpp TMC2130Stepper_IHOLD_IRUN.cpp TMC2130Stepper_CHOPCONF.cpp TMC2130Stepper_GCONF.cpp TMC2130Stepper_PWMCONF.cpp SW_SPI.cpp
|
||||
ifeq ($(TMC), 1)
|
||||
LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
|
||||
endif
|
||||
|
||||
ifeq ($(RELOC_WORKAROUND), 1)
|
||||
LD_PREFIX=-nodefaultlibs
|
||||
LD_SUFFIX=-lm -lgcc -lc -lgcc
|
||||
LD_PREFIX=-nodefaultlibs
|
||||
LD_SUFFIX=-lm -lgcc -lc -lgcc
|
||||
endif
|
||||
|
||||
#Check for Arduino 1.0.0 or higher and use the correct source files for that version
|
||||
ifeq ($(shell [ $(ARDUINO_VERSION) -ge 100 ] && echo true), true)
|
||||
LIB_CXXSRC += main.cpp
|
||||
LIB_CXXSRC += main.cpp
|
||||
else
|
||||
LIB_SRC += pins_arduino.c main.c
|
||||
LIB_SRC += pins_arduino.c main.c
|
||||
endif
|
||||
|
||||
FORMAT = ihex
|
||||
@@ -544,62 +602,81 @@ OPT = s
|
||||
DEFINES ?=
|
||||
|
||||
# Program settings
|
||||
CC = $(AVR_TOOLS_PATH)avr-gcc
|
||||
CXX = $(AVR_TOOLS_PATH)avr-g++
|
||||
OBJCOPY = $(AVR_TOOLS_PATH)avr-objcopy
|
||||
OBJDUMP = $(AVR_TOOLS_PATH)avr-objdump
|
||||
AR = $(AVR_TOOLS_PATH)avr-ar
|
||||
SIZE = $(AVR_TOOLS_PATH)avr-size
|
||||
NM = $(AVR_TOOLS_PATH)avr-nm
|
||||
CC = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-gcc
|
||||
CXX = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-g++
|
||||
OBJCOPY = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objcopy
|
||||
OBJDUMP = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-objdump
|
||||
AR = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-ar
|
||||
SIZE = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-size
|
||||
NM = $(AVR_TOOLS_PATH)$(TOOL_PREFIX)-nm
|
||||
AVRDUDE = avrdude
|
||||
REMOVE = rm -f
|
||||
MV = mv -f
|
||||
|
||||
# Place -D or -U options here
|
||||
CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)}
|
||||
CDEFS = -DF_CPU=$(F_CPU) ${addprefix -D , $(DEFINES)} -DARDUINO=$(ARDUINO_VERSION)
|
||||
CXXDEFS = $(CDEFS)
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), Teensy)
|
||||
CDEFS += -DUSB_SERIAL
|
||||
LIB_SRC += usb.c pins_teensy.c
|
||||
LIB_CXXSRC += usb_api.cpp
|
||||
CDEFS += -DUSB_SERIAL
|
||||
LIB_SRC += usb.c pins_teensy.c
|
||||
LIB_CXXSRC += usb_api.cpp
|
||||
|
||||
else ifeq ($(HARDWARE_VARIANT), archim)
|
||||
CDEFS += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
|
||||
LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
|
||||
LIB_SRC += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
|
||||
|
||||
ifeq ($(U8GLIB), 1)
|
||||
LIB_SRC += u8g_com_api.c u8g_pb32h1.c
|
||||
endif
|
||||
endif
|
||||
|
||||
# Add all the source directories as include directories too
|
||||
CINCS = ${addprefix -I ,${VPATH}}
|
||||
CXXINCS = ${addprefix -I ,${VPATH}}
|
||||
|
||||
# Silence warnings for library code (won't work for .h files, unfortunately)
|
||||
LIBWARN = -w -Wno-packed-bitfield-compat
|
||||
|
||||
# Compiler flag to set the C/CPP Standard level.
|
||||
CSTANDARD = -std=gnu99
|
||||
CXXSTANDARD = -std=gnu++11
|
||||
CDEBUG = -g$(DEBUG)
|
||||
CWARN = -Wall -Wstrict-prototypes
|
||||
CTUNING = -w -fsigned-char -funsigned-bitfields -fpack-struct \
|
||||
-fshort-enums -ffunction-sections -fdata-sections -flto \
|
||||
-DARDUINO=$(ARDUINO_VERSION)
|
||||
CWARN = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas
|
||||
CXXWARN = -Wall -Wno-packed-bitfield-compat -Wno-pragmas
|
||||
CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
|
||||
-fshort-enums -ffunction-sections -fdata-sections
|
||||
ifneq ($(HARDWARE_MOTHERBOARD),)
|
||||
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
||||
CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
|
||||
endif
|
||||
#CEXTRA = -Wa,-adhlns=$(<:.c=.lst)
|
||||
CEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics
|
||||
|
||||
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CWARN) $(CEXTRA) $(CTUNING) $(CSTANDARD)
|
||||
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) -Wall $(CEXTRA) $(CTUNING) $(CXXSTANDARD)
|
||||
CXXEXTRA = -fno-use-cxa-atexit -fno-threadsafe-statics -fno-rtti
|
||||
CFLAGS := $(CDEBUG) $(CDEFS) $(CINCS) -O$(OPT) $(CEXTRA) $(CTUNING) $(CSTANDARD)
|
||||
CXXFLAGS := $(CDEFS) $(CINCS) -O$(OPT) $(CXXEXTRA) $(CTUNING) $(CXXSTANDARD)
|
||||
ASFLAGS := $(CDEFS)
|
||||
#ASFLAGS = -Wa,-adhlns=$(<:.S=.lst),-gstabs
|
||||
LDFLAGS = -lm
|
||||
|
||||
ifeq ($(HARDWARE_VARIANT), archim)
|
||||
LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
|
||||
LD_SUFFIX = $(LDLIBS)
|
||||
LDFLAGS = -lm -gcc -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
|
||||
else
|
||||
LD_PREFIX = -Wl,--gc-sections,--relax
|
||||
LDFLAGS = -lm
|
||||
CTUNING += -flto
|
||||
endif
|
||||
|
||||
# Programming support using avrdude. Settings and variables.
|
||||
AVRDUDE_PORT = $(UPLOAD_PORT)
|
||||
AVRDUDE_WRITE_FLASH = -Uflash:w:$(BUILD_DIR)/$(TARGET).hex:i
|
||||
ifeq ($(shell uname -s), Linux)
|
||||
AVRDUDE_CONF = /etc/avrdude/avrdude.conf
|
||||
AVRDUDE_CONF = /etc/avrdude/avrdude.conf
|
||||
else
|
||||
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
|
||||
AVRDUDE_CONF = $(ARDUINO_INSTALL_DIR)/hardware/tools/avr/etc/avrdude.conf
|
||||
endif
|
||||
AVRDUDE_FLAGS = -D -C$(AVRDUDE_CONF) \
|
||||
-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
|
||||
-b$(UPLOAD_RATE)
|
||||
-p$(MCU) -P$(AVRDUDE_PORT) -c$(AVRDUDE_PROGRAMMER) \
|
||||
-b$(UPLOAD_RATE)
|
||||
|
||||
# Since Marlin 2.0, the source files may be distributed into several
|
||||
# different directories, so it is necessary to find them recursively
|
||||
@@ -619,17 +696,17 @@ LST = $(LIB_ASRC:.S=.lst) $(LIB_CXXSRC:.cpp=.lst) $(LIB_SRC:.c=.lst)
|
||||
|
||||
# Combine all necessary flags and optional flags.
|
||||
# Add target processor to flags.
|
||||
ALL_CFLAGS = -mmcu=$(MCU) -I. $(CFLAGS)
|
||||
ALL_CXXFLAGS = -mmcu=$(MCU) $(CXXFLAGS)
|
||||
ALL_ASFLAGS = -mmcu=$(MCU) -x assembler-with-cpp $(ASFLAGS)
|
||||
ALL_CFLAGS = $(MCU_FLAGS) $(CPU_FLAGS) $(CFLAGS) -I.
|
||||
ALL_CXXFLAGS = $(MCU_FLAGS) $(CPU_FLAGS) $(CXXFLAGS)
|
||||
ALL_ASFLAGS = $(MCU_FLAGS) $(CPU_FLAGS) $(ASFLAGS) -x assembler-with-cpp
|
||||
|
||||
# set V=1 (eg, "make V=1") to print the full commands etc.
|
||||
ifneq ($V,1)
|
||||
Pecho=@echo
|
||||
P=@
|
||||
Pecho=@echo
|
||||
P=@
|
||||
else
|
||||
Pecho=@:
|
||||
P=
|
||||
Pecho=@:
|
||||
P=
|
||||
endif
|
||||
|
||||
# Create required build hierarchy if it does not exist
|
||||
@@ -639,9 +716,10 @@ $(shell mkdir -p $(dir $(OBJ)))
|
||||
# Default target.
|
||||
all: sizeafter
|
||||
|
||||
build: elf hex
|
||||
build: elf hex bin
|
||||
|
||||
elf: $(BUILD_DIR)/$(TARGET).elf
|
||||
bin: $(BUILD_DIR)/$(TARGET).bin
|
||||
hex: $(BUILD_DIR)/$(TARGET).hex
|
||||
eep: $(BUILD_DIR)/$(TARGET).eep
|
||||
lss: $(BUILD_DIR)/$(TARGET).lss
|
||||
@@ -658,9 +736,9 @@ ifeq (${AVRDUDE_PROGRAMMER}, arduino)
|
||||
stty -hup < $(UPLOAD_PORT); true
|
||||
endif
|
||||
|
||||
# Display size of file.
|
||||
# Display size of file.
|
||||
HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
|
||||
ELFSIZE = $(SIZE) --mcu=$(MCU) -C $(BUILD_DIR)/$(TARGET).elf; \
|
||||
ELFSIZE = $(SIZE) $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
|
||||
$(SIZE) $(BUILD_DIR)/$(TARGET).elf
|
||||
sizebefore:
|
||||
$P if [ -f $(BUILD_DIR)/$(TARGET).elf ]; then echo; echo $(MSG_SIZE_BEFORE); $(HEXSIZE); echo; fi
|
||||
@@ -671,10 +749,10 @@ sizeafter: build
|
||||
|
||||
# Convert ELF to COFF for use in debugging / simulating in AVR Studio or VMLAB.
|
||||
COFFCONVERT=$(OBJCOPY) --debugging \
|
||||
--change-section-address .data-0x800000 \
|
||||
--change-section-address .bss-0x800000 \
|
||||
--change-section-address .noinit-0x800000 \
|
||||
--change-section-address .eeprom-0x810000
|
||||
--change-section-address .data-0x800000 \
|
||||
--change-section-address .bss-0x800000 \
|
||||
--change-section-address .noinit-0x800000 \
|
||||
--change-section-address .eeprom-0x810000
|
||||
|
||||
|
||||
coff: $(BUILD_DIR)/$(TARGET).elf
|
||||
@@ -685,16 +763,20 @@ extcoff: $(TARGET).elf
|
||||
$(COFFCONVERT) -O coff-ext-avr $(BUILD_DIR)/$(TARGET).elf $(TARGET).cof
|
||||
|
||||
|
||||
.SUFFIXES: .elf .hex .eep .lss .sym
|
||||
.SUFFIXES: .elf .hex .eep .lss .sym .bin
|
||||
.PRECIOUS: .o
|
||||
|
||||
.elf.hex:
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O $(FORMAT) -R .eeprom $< $@
|
||||
|
||||
.elf.bin:
|
||||
$(Pecho) " COPY $@"
|
||||
$P $(OBJCOPY) -O binary -R .eeprom $< $@
|
||||
|
||||
.elf.eep:
|
||||
-$(OBJCOPY) -j .eeprom --set-section-flags=.eeprom="alloc,load" \
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
--change-section-lma .eeprom=0 -O $(FORMAT) $< $@
|
||||
|
||||
# Create extended listing file from ELF output file.
|
||||
.elf.lss:
|
||||
@@ -704,32 +786,36 @@ extcoff: $(TARGET).elf
|
||||
.elf.sym:
|
||||
$(NM) -n $< > $@
|
||||
|
||||
# Link: create ELF output file from library.
|
||||
# Link: create ELF output file from library.
|
||||
|
||||
$(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
|
||||
$(Pecho) " CXX $@"
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -Wl,--gc-sections,--relax -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
$P $(CC) $(LD_PREFIX) $(ALL_CXXFLAGS) -o $@ -L. $(OBJ) $(LDFLAGS) $(LD_SUFFIX)
|
||||
|
||||
# Object files that were found in "src" will be stored in $(BUILD_DIR)
|
||||
# in directories that mirror the structure of "src"
|
||||
|
||||
$(BUILD_DIR)/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(CWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(CXXWARN) $< -o $@
|
||||
|
||||
# Object files for Arduino libs will be created in $(BUILD_DIR)/arduino
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.c Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CC $<"
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $< -o $@
|
||||
$P $(CC) -MMD -c $(ALL_CFLAGS) $(LIBWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.cpp Configuration.h Configuration_adv.h $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $< -o $@
|
||||
$P $(CXX) -MMD -c $(ALL_CXXFLAGS) $(LIBWARN) $< -o $@
|
||||
|
||||
$(BUILD_DIR)/arduino/%.o: %.S $(MAKEFILE)
|
||||
$(Pecho) " CXX $<"
|
||||
$P $(CXX) -MMD -c $(ALL_ASFLAGS) $< -o $@
|
||||
|
||||
# Target: clean project.
|
||||
clean:
|
||||
@@ -737,7 +823,7 @@ clean:
|
||||
$P rm -rf $(BUILD_DIR)
|
||||
|
||||
|
||||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
|
||||
.PHONY: all build elf hex eep lss sym program coff extcoff clean depend sizebefore sizeafter
|
||||
|
||||
# Automaticaly include the dependency files created by gcc
|
||||
-include ${patsubst %.o, %.d, ${OBJ}}
|
||||
|
||||
+39
-437
@@ -29,444 +29,46 @@
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
//#include "MarlinConfig.h"
|
||||
|
||||
//============================================
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 3
|
||||
#define STATUS_LOGO_WIDTH 24
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (41 + (E) * 20)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,
|
||||
B10000000,B00000000,B00000001,
|
||||
B10001110,B00000000,B11100001,
|
||||
B10011111,B00000001,B11110001,
|
||||
B10010011,B10000001,B00111001,
|
||||
B10011111,B10000001,B11111001,
|
||||
B10011111,B10000001,B11111001,
|
||||
B10011111,B10111001,B11111001,
|
||||
B10001111,B00101000,B11110001,
|
||||
B10000000,B00111000,B00000001,
|
||||
B10000000,B00000000,B00000001,
|
||||
B10011111,B11111111,B11111001,
|
||||
B10010001,B01110100,B10011001,
|
||||
B10011011,B00000110,B10101001,
|
||||
B10011011,B01010100,B10101001,
|
||||
B10011011,B01010110,B10101001,
|
||||
B10011011,B01010100,B10011001,
|
||||
B10011111,B11111111,B11111001,
|
||||
B11111111,B11111111,B11111111
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -79,11 +79,11 @@
|
||||
#elif PIN_EXISTS(E5_AUTO_FAN) && SPINDLE_LASER_PWM_PIN == E5_AUTO_FAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by E5_AUTO_FAN_PIN."
|
||||
#elif PIN_EXISTS(FAN) && SPINDLE_LASER_PWM_PIN == FAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN_PIN."
|
||||
#elif PIN_EXISTS(FAN1) && SPINDLE_LASER_PWM_PIN == FAN1_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN1_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN1_PIN."
|
||||
#elif PIN_EXISTS(FAN2) && SPINDLE_LASER_PWM_PIN == FAN2_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used FAN2_PIN."
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by FAN2_PIN."
|
||||
#elif PIN_EXISTS(CONTROLLERFAN) && SPINDLE_LASER_PWM_PIN == CONTROLLERFAN_PIN
|
||||
#error "SPINDLE_LASER_PWM_PIN is used by CONTROLLERFAN_PIN."
|
||||
#elif PIN_EXISTS(MOTOR_CURRENT_PWM_XY) && SPINDLE_LASER_PWM_PIN == MOTOR_CURRENT_PWM_XY_PIN
|
||||
|
||||
@@ -23,7 +23,7 @@
|
||||
|
||||
#include "../../inc/MarlinConfig.h"
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
|
||||
|
||||
#include "../shared/persistent_store_api.h"
|
||||
|
||||
@@ -39,8 +39,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
@@ -64,5 +63,5 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
|
||||
|
||||
size_t PersistentStore::capacity() { return E2END + 1; }
|
||||
|
||||
#endif // EEPROM_SETTINGS
|
||||
#endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
|
||||
#endif // __AVR__
|
||||
|
||||
@@ -150,7 +150,7 @@ static bool pwm_status(uint8_t pin) {
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
SERIAL_PROTOCOL_SP(2);
|
||||
SERIAL_ECHO_SP(2);
|
||||
} // pwm_status
|
||||
|
||||
|
||||
@@ -222,24 +222,24 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
|
||||
|
||||
#define OCR_VAL(T, L) pgm_read_word(&PWM_OCR[T][L])
|
||||
|
||||
static void err_is_counter() { SERIAL_PROTOCOLPGM(" non-standard PWM mode"); }
|
||||
static void err_is_interrupt() { SERIAL_PROTOCOLPGM(" compare interrupt enabled"); }
|
||||
static void err_prob_interrupt() { SERIAL_PROTOCOLPGM(" overflow interrupt enabled"); }
|
||||
static void print_is_also_tied() { SERIAL_PROTOCOLPGM(" is also tied to this pin"); SERIAL_PROTOCOL_SP(14); }
|
||||
static void err_is_counter() { SERIAL_ECHOPGM(" non-standard PWM mode"); }
|
||||
static void err_is_interrupt() { SERIAL_ECHOPGM(" compare interrupt enabled"); }
|
||||
static void err_prob_interrupt() { SERIAL_ECHOPGM(" overflow interrupt enabled"); }
|
||||
static void print_is_also_tied() { SERIAL_ECHOPGM(" is also tied to this pin"); SERIAL_ECHO_SP(14); }
|
||||
|
||||
void com_print(uint8_t N, uint8_t Z) {
|
||||
const uint8_t *TCCRA = (uint8_t*)TCCR_A(N);
|
||||
SERIAL_PROTOCOLPGM(" COM");
|
||||
SERIAL_PROTOCOLCHAR(N + '0');
|
||||
SERIAL_ECHOPGM(" COM");
|
||||
SERIAL_CHAR(N + '0');
|
||||
switch (Z) {
|
||||
case 'A':
|
||||
SERIAL_PROTOCOLPAIR("A: ", ((*TCCRA & (_BV(7) | _BV(6))) >> 6));
|
||||
SERIAL_ECHOPAIR("A: ", ((*TCCRA & (_BV(7) | _BV(6))) >> 6));
|
||||
break;
|
||||
case 'B':
|
||||
SERIAL_PROTOCOLPAIR("B: ", ((*TCCRA & (_BV(5) | _BV(4))) >> 4));
|
||||
SERIAL_ECHOPAIR("B: ", ((*TCCRA & (_BV(5) | _BV(4))) >> 4));
|
||||
break;
|
||||
case 'C':
|
||||
SERIAL_PROTOCOLPAIR("C: ", ((*TCCRA & (_BV(3) | _BV(2))) >> 2));
|
||||
SERIAL_ECHOPAIR("C: ", ((*TCCRA & (_BV(3) | _BV(2))) >> 2));
|
||||
break;
|
||||
}
|
||||
}
|
||||
@@ -251,10 +251,10 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
|
||||
uint8_t WGM = (((*TCCRB & _BV(WGM_2)) >> 1) | (*TCCRA & (_BV(WGM_0) | _BV(WGM_1))));
|
||||
if (N == 4) WGM |= ((*TCCRB & _BV(WGM_3)) >> 1);
|
||||
|
||||
SERIAL_PROTOCOLPGM(" TIMER");
|
||||
SERIAL_PROTOCOLCHAR(T + '0');
|
||||
SERIAL_PROTOCOLCHAR(L);
|
||||
SERIAL_PROTOCOL_SP(3);
|
||||
SERIAL_ECHOPGM(" TIMER");
|
||||
SERIAL_CHAR(T + '0');
|
||||
SERIAL_CHAR(L);
|
||||
SERIAL_ECHO_SP(3);
|
||||
|
||||
if (N == 3) {
|
||||
const uint8_t *OCRVAL8 = (uint8_t*)OCR_VAL(T, L - 'A');
|
||||
@@ -264,22 +264,22 @@ void timer_prefix(uint8_t T, char L, uint8_t N) { // T - timer L - pwm N -
|
||||
const uint16_t *OCRVAL16 = (uint16_t*)OCR_VAL(T, L - 'A');
|
||||
PWM_PRINT(*OCRVAL16);
|
||||
}
|
||||
SERIAL_PROTOCOLPAIR(" WGM: ", WGM);
|
||||
SERIAL_ECHOPAIR(" WGM: ", WGM);
|
||||
com_print(T,L);
|
||||
SERIAL_PROTOCOLPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
|
||||
SERIAL_ECHOPAIR(" CS: ", (*TCCRB & (_BV(CS_0) | _BV(CS_1) | _BV(CS_2)) ));
|
||||
|
||||
SERIAL_PROTOCOLPGM(" TCCR");
|
||||
SERIAL_PROTOCOLCHAR(T + '0');
|
||||
SERIAL_PROTOCOLPAIR("A: ", *TCCRA);
|
||||
SERIAL_ECHOPGM(" TCCR");
|
||||
SERIAL_CHAR(T + '0');
|
||||
SERIAL_ECHOPAIR("A: ", *TCCRA);
|
||||
|
||||
SERIAL_PROTOCOLPGM(" TCCR");
|
||||
SERIAL_PROTOCOLCHAR(T + '0');
|
||||
SERIAL_PROTOCOLPAIR("B: ", *TCCRB);
|
||||
SERIAL_ECHOPGM(" TCCR");
|
||||
SERIAL_CHAR(T + '0');
|
||||
SERIAL_ECHOPAIR("B: ", *TCCRB);
|
||||
|
||||
const uint8_t *TMSK = (uint8_t*)TIMSK(T);
|
||||
SERIAL_PROTOCOLPGM(" TIMSK");
|
||||
SERIAL_PROTOCOLCHAR(T + '0');
|
||||
SERIAL_PROTOCOLPAIR(": ", *TMSK);
|
||||
SERIAL_ECHOPGM(" TIMSK");
|
||||
SERIAL_CHAR(T + '0');
|
||||
SERIAL_ECHOPAIR(": ", *TMSK);
|
||||
|
||||
const uint8_t OCIE = L - 'A' + 1;
|
||||
if (N == 3) { if (WGM == 0 || WGM == 2 || WGM == 4 || WGM == 6) err_is_counter(); }
|
||||
@@ -336,22 +336,22 @@ static void pwm_details(uint8_t pin) {
|
||||
case NOT_ON_TIMER: break;
|
||||
|
||||
}
|
||||
SERIAL_PROTOCOLPGM(" ");
|
||||
SERIAL_ECHOPGM(" ");
|
||||
|
||||
// on pins that have two PWMs, print info on second PWM
|
||||
#if AVR_ATmega2560_FAMILY || AVR_AT90USB1286_FAMILY
|
||||
// looking for port B7 - PWMs 0A and 1C
|
||||
if (digitalPinToPort_DEBUG(pin) == 'B' - 64 && 0x80 == digitalPinToBitMask_DEBUG(pin)) {
|
||||
#if !AVR_AT90USB1286_FAMILY
|
||||
SERIAL_PROTOCOLPGM("\n .");
|
||||
SERIAL_PROTOCOL_SP(18);
|
||||
SERIAL_PROTOCOLPGM("TIMER1C");
|
||||
SERIAL_ECHOPGM("\n .");
|
||||
SERIAL_ECHO_SP(18);
|
||||
SERIAL_ECHOPGM("TIMER1C");
|
||||
print_is_also_tied();
|
||||
timer_prefix(1, 'C', 4);
|
||||
#else
|
||||
SERIAL_PROTOCOLPGM("\n .");
|
||||
SERIAL_PROTOCOL_SP(18);
|
||||
SERIAL_PROTOCOLPGM("TIMER0A");
|
||||
SERIAL_ECHOPGM("\n .");
|
||||
SERIAL_ECHO_SP(18);
|
||||
SERIAL_ECHOPGM("TIMER0A");
|
||||
print_is_also_tied();
|
||||
timer_prefix(0, 'A', 3);
|
||||
#endif
|
||||
@@ -372,7 +372,7 @@ static void pwm_details(uint8_t pin) {
|
||||
void print_port(int8_t pin) { // print port number
|
||||
#ifdef digitalPinToPort_DEBUG
|
||||
uint8_t x;
|
||||
SERIAL_PROTOCOLPGM(" Port: ");
|
||||
SERIAL_ECHOPGM(" Port: ");
|
||||
#if AVR_AT90USB1286_FAMILY
|
||||
x = (pin == 46 || pin == 47) ? 'E' : digitalPinToPort_DEBUG(pin) + 64;
|
||||
#else
|
||||
@@ -395,7 +395,7 @@ static void pwm_details(uint8_t pin) {
|
||||
#endif
|
||||
SERIAL_CHAR(x);
|
||||
#else
|
||||
SERIAL_PROTOCOL_SP(10);
|
||||
SERIAL_ECHO_SP(10);
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@@ -62,8 +62,7 @@ void watchdog_init() {
|
||||
#if ENABLED(WATCHDOG_RESET_MANUAL)
|
||||
ISR(WDT_vect) {
|
||||
sei(); // With the interrupt driven serial we need to allow interrupts.
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_WATCHDOG_FIRED);
|
||||
SERIAL_ERROR_MSG(MSG_WATCHDOG_FIRED);
|
||||
minkill(); // interrupt-safe final kill and infinite loop
|
||||
}
|
||||
#endif // WATCHDOG_RESET_MANUAL
|
||||
|
||||
@@ -145,8 +145,8 @@ static const UnwindCallbacks UnwCallbacks = {
|
||||
UnwReadW,
|
||||
UnwReadH,
|
||||
UnwReadB
|
||||
#if defined(UNW_DEBUG)
|
||||
,UnwPrintf
|
||||
#ifdef UNW_DEBUG
|
||||
, UnwPrintf
|
||||
#endif
|
||||
};
|
||||
|
||||
|
||||
@@ -121,7 +121,7 @@ static uint8_t buffer[256] = {0}, // The RAM buffer to accumulate writes
|
||||
char buffer[80];
|
||||
|
||||
sprintf(buffer, "Page: %d (0x%04x)\n", page, page);
|
||||
SERIAL_PROTOCOL(buffer);
|
||||
SERIAL_ECHO(buffer);
|
||||
|
||||
char* p = &buffer[0];
|
||||
for (int i = 0; i< PageSize; ++i) {
|
||||
@@ -131,7 +131,7 @@ static uint8_t buffer[256] = {0}, // The RAM buffer to accumulate writes
|
||||
if ((i & 0xF) == 0xF) {
|
||||
*p++ = '\n';
|
||||
*p = 0;
|
||||
SERIAL_PROTOCOL(buffer);
|
||||
SERIAL_ECHO(buffer);
|
||||
p = &buffer[0];
|
||||
}
|
||||
}
|
||||
|
||||
@@ -465,6 +465,9 @@
|
||||
|
||||
#define DIO107_PIN 10
|
||||
#define DIO107_WPORT PIOB
|
||||
|
||||
#define DIO108_PIN 9
|
||||
#define DIO108_WPORT PIOB
|
||||
#else
|
||||
#define DIO92_PIN 5
|
||||
#define DIO92_WPORT PIOA
|
||||
|
||||
@@ -53,8 +53,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -93,7 +93,7 @@ bool GET_ARRAY_IS_DIGITAL(int8_t pin) {
|
||||
void pwm_details(int32_t pin) {
|
||||
if (pwm_status(pin)) {
|
||||
uint32_t chan = g_APinDescription[pin].ulPWMChannel;
|
||||
SERIAL_PROTOCOLPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
|
||||
SERIAL_ECHOPAIR("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
|
||||
}
|
||||
}
|
||||
|
||||
|
||||
@@ -94,10 +94,8 @@ void u8g_SetPILevel_DUE_hw_spi(u8g_t *u8g, uint8_t pin_index, uint8_t level) {
|
||||
else port->PIO_CODR = mask;
|
||||
}
|
||||
|
||||
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr)
|
||||
{
|
||||
switch(msg)
|
||||
{
|
||||
uint8_t u8g_com_HAL_DUE_shared_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
|
||||
switch(msg) {
|
||||
case U8G_COM_MSG_STOP:
|
||||
break;
|
||||
|
||||
|
||||
@@ -49,6 +49,7 @@
|
||||
|
||||
#undef UNUSED /* To avoid a macro clash as macros.h already defines it */
|
||||
#include "../../../core/macros.h" /* For ENABLED()/DISABLED() */
|
||||
#include "../../../core/boards.h" /* For MB() */
|
||||
#include "../../../../Configuration.h" /* For CUSTOM_MACHINE_NAME definition - We just need the name, no C++ allowed! */
|
||||
#include "compiler.h"
|
||||
|
||||
@@ -88,7 +89,11 @@
|
||||
//#define USB_DEVICE_LOW_SPEED
|
||||
|
||||
//! To define a Full speed device
|
||||
//#define USB_DEVICE_FULL_SPEED
|
||||
//#define USB_DEVICE_FULL_SPEED
|
||||
|
||||
#if MB(ARCHIM1)
|
||||
#define USB_DEVICE_FULL_SPEED
|
||||
#endif
|
||||
|
||||
//! To authorize the High speed
|
||||
#ifndef USB_DEVICE_FULL_SPEED
|
||||
|
||||
@@ -19,7 +19,7 @@ void sd_mmc_spi_mem_init(void) {
|
||||
}
|
||||
|
||||
Ctrl_status sd_mmc_spi_test_unit_ready(void) {
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.cardOK)
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
|
||||
return CTRL_NO_PRESENT;
|
||||
return CTRL_GOOD;
|
||||
}
|
||||
@@ -27,7 +27,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready(void) {
|
||||
// NOTE: This function is defined as returning the address of the last block
|
||||
// in the card, which is cardSize() - 1
|
||||
Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.cardOK)
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
|
||||
return CTRL_NO_PRESENT;
|
||||
*nb_sector = card.getSd2Card().cardSize() - 1;
|
||||
return CTRL_GOOD;
|
||||
@@ -42,7 +42,7 @@ bool sd_mmc_spi_wr_protect(void) {
|
||||
}
|
||||
|
||||
bool sd_mmc_spi_removal(void) {
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.cardOK)
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
|
||||
return true;
|
||||
return false;
|
||||
}
|
||||
@@ -61,13 +61,13 @@ uint8_t sector_buf[SD_MMC_BLOCK_SIZE];
|
||||
// #define DEBUG_MMC
|
||||
|
||||
Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.cardOK)
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
|
||||
return CTRL_NO_PRESENT;
|
||||
|
||||
#ifdef DEBUG_MMC
|
||||
char buffer[80];
|
||||
sprintf(buffer, "SDRD: %d @ 0x%08x\n", nb_sector, addr);
|
||||
SERIAL_PROTOCOL_P(0, buffer);
|
||||
SERIAL_ECHO_P(0, buffer);
|
||||
#endif
|
||||
|
||||
// Start reading
|
||||
@@ -95,13 +95,13 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
|
||||
}
|
||||
|
||||
Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.cardOK)
|
||||
if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.flag.cardOK)
|
||||
return CTRL_NO_PRESENT;
|
||||
|
||||
#ifdef DEBUG_MMC
|
||||
char buffer[80];
|
||||
sprintf(buffer, "SDWR: %d @ 0x%08x\n", nb_sector, addr);
|
||||
SERIAL_PROTOCOL_P(0, buffer);
|
||||
SERIAL_ECHO_P(0, buffer);
|
||||
#endif
|
||||
|
||||
if (!card.getSd2Card().writeStart(addr, nb_sector))
|
||||
|
||||
@@ -118,7 +118,7 @@ static const UnwindCallbacks UnwCallbacks = {
|
||||
UnwReadW,
|
||||
UnwReadH,
|
||||
UnwReadB
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
,UnwPrintf
|
||||
#endif
|
||||
};
|
||||
|
||||
@@ -106,7 +106,7 @@ void HAL_idletask(void) {
|
||||
// the disk if Marlin has it mounted. Unfortuately there is currently no way
|
||||
// to unmount the disk from the LCD menu.
|
||||
// if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
|
||||
if (card.cardOK)
|
||||
if (card.flag.cardOK)
|
||||
MSC_Aquire_Lock();
|
||||
else
|
||||
MSC_Release_Lock();
|
||||
|
||||
@@ -57,7 +57,7 @@ extern "C" {
|
||||
#define EEPROM_ERASE (0xff)
|
||||
#define SLOT_ADDRESS(sector, slot) (((uint8_t *)SECTOR_START(sector)) + slot * EEPROM_SIZE)
|
||||
|
||||
static uint8_t ram_eeprom[EEPROM_SIZE];
|
||||
static uint8_t ram_eeprom[EEPROM_SIZE] __attribute__((aligned(4))) = {0};
|
||||
static bool eeprom_dirty = false;
|
||||
static int current_slot = 0;
|
||||
|
||||
@@ -92,7 +92,6 @@ bool PersistentStore::access_finish() {
|
||||
if (--current_slot < 0) {
|
||||
// all slots have been used, erase everything and start again
|
||||
__disable_irq();
|
||||
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||
status = EraseSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||
__enable_irq();
|
||||
|
||||
@@ -100,7 +99,6 @@ bool PersistentStore::access_finish() {
|
||||
}
|
||||
|
||||
__disable_irq();
|
||||
PrepareSector(EEPROM_SECTOR, EEPROM_SECTOR);
|
||||
status = CopyRAM2Flash(SLOT_ADDRESS(EEPROM_SECTOR, current_slot), ram_eeprom, IAP_WRITE_4096);
|
||||
__enable_irq();
|
||||
|
||||
|
||||
@@ -80,23 +80,23 @@ bool PersistentStore::access_finish() {
|
||||
// to see errors that are happening in read_data / write_data
|
||||
static void debug_rw(const bool write, int &pos, const uint8_t *value, const size_t size, const FRESULT s, const size_t total=0) {
|
||||
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
|
||||
SERIAL_PROTOCOLCHAR(' ');
|
||||
SERIAL_CHAR(' ');
|
||||
serialprintPGM(rw_str);
|
||||
SERIAL_PROTOCOLPAIR("_data(", pos);
|
||||
SERIAL_PROTOCOLPAIR(",", (int)value);
|
||||
SERIAL_PROTOCOLPAIR(",", (int)size);
|
||||
SERIAL_PROTOCOLLNPGM(", ...)");
|
||||
SERIAL_ECHOPAIR("_data(", pos);
|
||||
SERIAL_ECHOPAIR(",", (int)value);
|
||||
SERIAL_ECHOPAIR(",", (int)size);
|
||||
SERIAL_ECHOLNPGM(", ...)");
|
||||
if (total) {
|
||||
SERIAL_PROTOCOLPGM(" f_");
|
||||
SERIAL_ECHOPGM(" f_");
|
||||
serialprintPGM(rw_str);
|
||||
SERIAL_PROTOCOLPAIR("()=", (int)s);
|
||||
SERIAL_PROTOCOLPAIR("\n size=", size);
|
||||
SERIAL_PROTOCOLPGM("\n bytes_");
|
||||
SERIAL_ECHOPAIR("()=", (int)s);
|
||||
SERIAL_ECHOPAIR("\n size=", size);
|
||||
SERIAL_ECHOPGM("\n bytes_");
|
||||
serialprintPGM(write ? PSTR("written=") : PSTR("read="));
|
||||
SERIAL_PROTOCOLLN(total);
|
||||
SERIAL_ECHOLN(total);
|
||||
}
|
||||
else
|
||||
SERIAL_PROTOCOLLNPAIR(" f_lseek()=", (int)s);
|
||||
SERIAL_ECHOLNPAIR(" f_lseek()=", (int)s);
|
||||
}
|
||||
|
||||
// File function return codes for type FRESULT. This goes away soon, but
|
||||
|
||||
@@ -78,14 +78,20 @@ uint16_t HAL_adc_result;
|
||||
// Public functions
|
||||
// --------------------------------------------------------------------------
|
||||
|
||||
|
||||
// Needed for DELAY_NS() / DELAY_US() on CORTEX-M7
|
||||
#if (defined(__arm__) || defined(__thumb__)) && __CORTEX_M == 7
|
||||
// HAL pre-initialization task
|
||||
// Force the preinit function to run between the premain() and main() function
|
||||
// of the STM32 arduino core
|
||||
__attribute__((constructor (102)))
|
||||
void HAL_preinit() {
|
||||
enableCycleCounter();
|
||||
}
|
||||
#endif
|
||||
|
||||
// HAL initialization task
|
||||
void HAL_init(void) {
|
||||
|
||||
// Needed for DELAY_NS() / DELAY_US() on CORTEX-M7
|
||||
#if (defined(__arm__) || defined(__thumb__)) && __CORTEX_M == 7
|
||||
enableCycleCounter();
|
||||
#endif
|
||||
|
||||
FastIO_init();
|
||||
|
||||
#if ENABLED(SDSUPPORT)
|
||||
|
||||
@@ -62,8 +62,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,7 +41,7 @@ char HAL_STM32F1_eeprom_content[HAL_STM32F1_EEPROM_SIZE];
|
||||
char eeprom_filename[] = "eeprom.dat";
|
||||
|
||||
bool PersistentStore::access_start() {
|
||||
if (!card.cardOK) return false;
|
||||
if (!card.flag.cardOK) return false;
|
||||
int16_t bytes_read = 0;
|
||||
constexpr char eeprom_zero = 0xFF;
|
||||
card.openFile(eeprom_filename, true);
|
||||
@@ -54,7 +54,7 @@ bool PersistentStore::access_start() {
|
||||
}
|
||||
|
||||
bool PersistentStore::access_finish() {
|
||||
if (!card.cardOK) return false;
|
||||
if (!card.flag.cardOK) return false;
|
||||
card.openFile(eeprom_filename, true);
|
||||
int16_t bytes_written = card.write(HAL_STM32F1_eeprom_content, HAL_STM32F1_EEPROM_SIZE);
|
||||
card.closefile();
|
||||
|
||||
@@ -41,8 +41,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -41,8 +41,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -21,8 +21,7 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -42,8 +42,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -21,8 +21,7 @@ bool write_data(int &pos, const uint8_t *value, uint16_t size, uint16_t *crc) {
|
||||
if (v != eeprom_read_byte(p)) {
|
||||
eeprom_write_byte(p, v);
|
||||
if (eeprom_read_byte(p) != v) {
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM(MSG_ERR_EEPROM_WRITE);
|
||||
SERIAL_ECHO_MSG(MSG_ERR_EEPROM_WRITE);
|
||||
return true;
|
||||
}
|
||||
}
|
||||
|
||||
@@ -45,7 +45,7 @@
|
||||
#define FTM3_CH5_PIN 36
|
||||
#define FTM3_CH6_PIN 37
|
||||
#define FTM3_CH7_PIN 38
|
||||
#if defined(__MK66FX1M0__) // Teensy3.6
|
||||
#ifdef __MK66FX1M0__ // Teensy3.6
|
||||
#define TPM1_CH0_PIN 16
|
||||
#define TPM1_CH1_PIN 17
|
||||
#endif
|
||||
@@ -102,7 +102,7 @@ bool HAL_pwm_status(int8_t pin) {
|
||||
default:
|
||||
return false;
|
||||
}
|
||||
SERIAL_PROTOCOLPGM(" ");
|
||||
SERIAL_ECHOPGM(" ");
|
||||
}
|
||||
|
||||
static void HAL_pwm_details(uint8_t pin) { /* TODO */ }
|
||||
|
||||
@@ -129,7 +129,6 @@ void eeprom_update_block(const void *pos, void* eeprom_address, size_t n) {
|
||||
|
||||
|
||||
uint8_t eeprom_read_byte(uint8_t *pos) {
|
||||
byte data = 0xFF;
|
||||
unsigned eeprom_address = (unsigned)pos;
|
||||
|
||||
eeprom_init();
|
||||
|
||||
@@ -88,8 +88,7 @@ void backtrace(void) {
|
||||
btf.pc = pc | 1; // Force Thumb, as CORTEX only support it
|
||||
|
||||
// Perform a backtrace
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM("Backtrace:");
|
||||
SERIAL_ERROR_MSG("Backtrace:");
|
||||
int ctr = 0;
|
||||
UnwindStart(&btf, &UnwCallbacks, &ctr);
|
||||
}
|
||||
|
||||
@@ -23,7 +23,7 @@
|
||||
#include "unwarm.h"
|
||||
#include "unwarmmem.h"
|
||||
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
|
||||
/**
|
||||
* Printf wrapper.
|
||||
|
||||
@@ -106,7 +106,7 @@ typedef struct {
|
||||
#define M_IsOriginValid(v) (((v) & 0x7F) ? true : false)
|
||||
#define M_Origin2Str(v) ((v) ? "VALID" : "INVALID")
|
||||
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
#define UnwPrintd1(a) state->cb->printf(a)
|
||||
#define UnwPrintd2(a,b) state->cb->printf(a,b)
|
||||
#define UnwPrintd3(a,b,c) state->cb->printf(a,b,c)
|
||||
|
||||
@@ -142,7 +142,7 @@ UnwResult UnwStartArm(UnwState * const state) {
|
||||
|
||||
/* MRS */
|
||||
else if ((instr & 0xFFBF0FFF) == 0xE10F0000) {
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
bool R = (instr & 0x00400000) ? true : false;
|
||||
#endif
|
||||
uint8_t rd = (instr & 0x0000F000) >> 12;
|
||||
@@ -154,7 +154,7 @@ UnwResult UnwStartArm(UnwState * const state) {
|
||||
}
|
||||
/* MSR */
|
||||
else if ((instr & 0xFFB0F000) == 0xE120F000) {
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
bool R = (instr & 0x00400000) ? true : false;
|
||||
|
||||
UnwPrintd2("MSR %s_?, ???", R ? "SPSR" : "CPSR");
|
||||
@@ -172,7 +172,7 @@ UnwResult UnwStartArm(UnwState * const state) {
|
||||
else if (isDataProc(instr)) {
|
||||
bool I = (instr & 0x02000000) ? true : false;
|
||||
uint8_t opcode = (instr & 0x01E00000) >> 21;
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
bool S = (instr & 0x00100000) ? true : false;
|
||||
#endif
|
||||
uint8_t rn = (instr & 0x000F0000) >> 16;
|
||||
@@ -220,7 +220,7 @@ UnwResult UnwStartArm(UnwState * const state) {
|
||||
uint8_t regShift = (operand2 & 0x0010) ? true : false;
|
||||
uint8_t shiftType = (operand2 & 0x0060) >> 5;
|
||||
uint32_t shiftDist;
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
const char * const shiftMnu[4] = { "LSL", "LSR", "ASR", "ROR" };
|
||||
#endif
|
||||
UnwPrintd2("r%d ", rm);
|
||||
@@ -453,7 +453,7 @@ UnwResult UnwStartArm(UnwState * const state) {
|
||||
bool addrValid = M_IsOriginValid(state->regData[baseReg].o);
|
||||
int8_t r;
|
||||
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
/* Display the instruction */
|
||||
if (L) {
|
||||
UnwPrintd6("LDM%c%c r%d%s, {reglist}%s\n", P ? 'E' : 'F', U ? 'D' : 'A', baseReg, W ? "!" : "", S ? "^" : "");
|
||||
|
||||
@@ -680,7 +680,7 @@ UnwResult UnwStartThumb(UnwState * const state) {
|
||||
uint8_t rs = (instr & 0x0038) >> 3;
|
||||
uint8_t rd = (instr & 0x0007);
|
||||
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
static const char * const mnu[16] = {
|
||||
"AND", "EOR", "LSL", "LSR",
|
||||
"ASR", "ADC", "SBC", "ROR",
|
||||
|
||||
@@ -90,7 +90,7 @@ bool UnwMemHashWrite(MemData * const memData, uint32_t addr, uint32_t val, bool
|
||||
M_SetIdxUsed(memData->tracked, i);
|
||||
}
|
||||
else {
|
||||
#if defined(UNW_DEBUG)
|
||||
#ifdef UNW_DEBUG
|
||||
memData->v[i] = 0xDEADBEEF;
|
||||
#endif
|
||||
M_ClrIdxUsed(memData->tracked, i);
|
||||
|
||||
@@ -22,7 +22,7 @@
|
||||
*/
|
||||
#include "../../inc/MarlinConfigPre.h"
|
||||
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
#if ENABLED(EEPROM_SETTINGS) || ENABLED(SD_FIRMWARE_UPDATE)
|
||||
|
||||
#include "persistent_store_api.h"
|
||||
PersistentStore persistentStore;
|
||||
|
||||
+19
-24
@@ -264,8 +264,7 @@ bool pin_is_protected(const pin_t pin) {
|
||||
}
|
||||
|
||||
void protected_pin_err() {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_PROTECTED_PIN);
|
||||
SERIAL_ERROR_MSG(MSG_ERR_PROTECTED_PIN);
|
||||
}
|
||||
|
||||
void quickstop_stepper() {
|
||||
@@ -371,7 +370,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
|
||||
#if HAS_LCD_MENU && ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
if (ubl.lcd_map_control) {
|
||||
ubl.lcd_map_control = false;
|
||||
set_defer_return_to_status(false);
|
||||
ui.defer_status_screen(false);
|
||||
}
|
||||
#endif
|
||||
}
|
||||
@@ -400,8 +399,7 @@ void manage_inactivity(const bool ignore_stepper_queue/*=false*/) {
|
||||
// KILL the machine
|
||||
// ----------------------------------------------------------------
|
||||
if (killCount >= KILL_DELAY) {
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_KILL_BUTTON);
|
||||
SERIAL_ERROR_MSG(MSG_KILL_BUTTON);
|
||||
kill();
|
||||
}
|
||||
#endif
|
||||
@@ -549,7 +547,7 @@ void idle(
|
||||
max7219.idle_tasks();
|
||||
#endif
|
||||
|
||||
lcd_update();
|
||||
ui.update();
|
||||
|
||||
#if ENABLED(HOST_KEEPALIVE_FEATURE)
|
||||
gcode.host_keepalive();
|
||||
@@ -606,11 +604,10 @@ void idle(
|
||||
void kill(PGM_P const lcd_msg/*=NULL*/) {
|
||||
thermalManager.disable_all_heaters();
|
||||
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_KILLED);
|
||||
SERIAL_ERROR_MSG(MSG_ERR_KILLED);
|
||||
|
||||
#if ENABLED(ULTRA_LCD) || ENABLED(EXTENSIBLE_UI)
|
||||
kill_screen(lcd_msg ? lcd_msg : PSTR(MSG_KILLED));
|
||||
#if HAS_SPI_LCD || ENABLED(EXTENSIBLE_UI)
|
||||
ui.kill_screen(lcd_msg ? lcd_msg : PSTR(MSG_KILLED));
|
||||
#else
|
||||
UNUSED(lcd_msg);
|
||||
#endif
|
||||
@@ -663,8 +660,7 @@ void stop() {
|
||||
|
||||
if (IsRunning()) {
|
||||
Stopped_gcode_LastN = gcode_LastN; // Save last g_code for restart
|
||||
SERIAL_ERROR_START();
|
||||
SERIAL_ERRORLNPGM(MSG_ERR_STOPPED);
|
||||
SERIAL_ERROR_MSG(MSG_ERR_STOPPED);
|
||||
LCD_MESSAGEPGM(MSG_STOPPED);
|
||||
safe_delay(350); // allow enough time for messages to get out before stopping
|
||||
Running = false;
|
||||
@@ -745,7 +741,7 @@ void setup() {
|
||||
#endif
|
||||
#endif
|
||||
|
||||
SERIAL_PROTOCOLLNPGM("start");
|
||||
SERIAL_ECHOLNPGM("start");
|
||||
SERIAL_ECHO_START();
|
||||
|
||||
#if TMC_HAS_SPI
|
||||
@@ -781,8 +777,7 @@ void setup() {
|
||||
SERIAL_ECHOPGM(MSG_CONFIGURATION_VER);
|
||||
SERIAL_ECHOPGM(STRING_DISTRIBUTION_DATE);
|
||||
SERIAL_ECHOLNPGM(MSG_AUTHOR STRING_CONFIG_H_AUTHOR);
|
||||
SERIAL_ECHO_START();
|
||||
SERIAL_ECHOLNPGM("Compiled: " __DATE__);
|
||||
SERIAL_ECHO_MSG("Compiled: " __DATE__);
|
||||
#endif
|
||||
|
||||
SERIAL_ECHO_START();
|
||||
@@ -899,11 +894,11 @@ void setup() {
|
||||
fanmux_init();
|
||||
#endif
|
||||
|
||||
lcd_init();
|
||||
lcd_reset_status();
|
||||
ui.init();
|
||||
ui.reset_status();
|
||||
|
||||
#if ENABLED(SHOW_BOOTSCREEN)
|
||||
lcd_bootscreen();
|
||||
ui.show_bootscreen();
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER)
|
||||
@@ -924,11 +919,11 @@ void setup() {
|
||||
#endif
|
||||
|
||||
#if DO_SWITCH_EXTRUDER
|
||||
move_extruder_servo(0); // Initialize extruder servo
|
||||
move_extruder_servo(0); // Initialize extruder servo
|
||||
#endif
|
||||
|
||||
#if ENABLED(SWITCHING_NOZZLE)
|
||||
move_nozzle_servo(0); // Initialize nozzle servo
|
||||
move_nozzle_servo(0); // Initialize nozzle servo
|
||||
#endif
|
||||
|
||||
#if ENABLED(PARKING_EXTRUDER)
|
||||
@@ -936,11 +931,11 @@ void setup() {
|
||||
#endif
|
||||
|
||||
#if ENABLED(POWER_LOSS_RECOVERY)
|
||||
check_print_job_recovery();
|
||||
recovery.check();
|
||||
#endif
|
||||
|
||||
#if ENABLED(USE_WATCHDOG) // Reinit watchdog after HAL_get_reset_source call
|
||||
watchdog_init();
|
||||
#if ENABLED(USE_WATCHDOG)
|
||||
watchdog_init(); // Reinit watchdog after HAL_get_reset_source call
|
||||
#endif
|
||||
|
||||
#if ENABLED(EXTERNAL_CLOSED_LOOP_CONTROLLER)
|
||||
@@ -967,7 +962,7 @@ void loop() {
|
||||
#if ENABLED(SDSUPPORT)
|
||||
card.checkautostart();
|
||||
|
||||
if (card.abort_sd_printing) {
|
||||
if (card.flag.abort_sd_printing) {
|
||||
card.stopSDPrint(
|
||||
#if SD_RESORT
|
||||
true
|
||||
|
||||
+2
-121
@@ -41,126 +41,6 @@ void idle(
|
||||
|
||||
void manage_inactivity(const bool ignore_stepper_queue=false);
|
||||
|
||||
#if HAS_X2_ENABLE
|
||||
#define enable_X() do{ X_ENABLE_WRITE( X_ENABLE_ON); X2_ENABLE_WRITE( X_ENABLE_ON); }while(0)
|
||||
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); X2_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
|
||||
#elif HAS_X_ENABLE
|
||||
#define enable_X() X_ENABLE_WRITE( X_ENABLE_ON)
|
||||
#define disable_X() do{ X_ENABLE_WRITE(!X_ENABLE_ON); CBI(axis_known_position, X_AXIS); }while(0)
|
||||
#else
|
||||
#define enable_X() NOOP
|
||||
#define disable_X() NOOP
|
||||
#endif
|
||||
|
||||
#if HAS_Y2_ENABLE
|
||||
#define enable_Y() do{ Y_ENABLE_WRITE( Y_ENABLE_ON); Y2_ENABLE_WRITE(Y_ENABLE_ON); }while(0)
|
||||
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); Y2_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
|
||||
#elif HAS_Y_ENABLE
|
||||
#define enable_Y() Y_ENABLE_WRITE( Y_ENABLE_ON)
|
||||
#define disable_Y() do{ Y_ENABLE_WRITE(!Y_ENABLE_ON); CBI(axis_known_position, Y_AXIS); }while(0)
|
||||
#else
|
||||
#define enable_Y() NOOP
|
||||
#define disable_Y() NOOP
|
||||
#endif
|
||||
|
||||
#if HAS_Z3_ENABLE
|
||||
#define enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); Z3_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
|
||||
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); Z3_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
|
||||
#elif HAS_Z2_ENABLE
|
||||
#define enable_Z() do{ Z_ENABLE_WRITE( Z_ENABLE_ON); Z2_ENABLE_WRITE(Z_ENABLE_ON); }while(0)
|
||||
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); Z2_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
|
||||
#elif HAS_Z_ENABLE
|
||||
#define enable_Z() Z_ENABLE_WRITE( Z_ENABLE_ON)
|
||||
#define disable_Z() do{ Z_ENABLE_WRITE(!Z_ENABLE_ON); CBI(axis_known_position, Z_AXIS); }while(0)
|
||||
#else
|
||||
#define enable_Z() NOOP
|
||||
#define disable_Z() NOOP
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIXING_EXTRUDER)
|
||||
|
||||
/**
|
||||
* Mixing steppers synchronize their enable (and direction) together
|
||||
*/
|
||||
#if MIXING_STEPPERS > 5
|
||||
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); E5_ENABLE_WRITE( E_ENABLE_ON); }
|
||||
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); E5_ENABLE_WRITE(!E_ENABLE_ON); }
|
||||
#elif MIXING_STEPPERS > 4
|
||||
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); E4_ENABLE_WRITE( E_ENABLE_ON); }
|
||||
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); E4_ENABLE_WRITE(!E_ENABLE_ON); }
|
||||
#elif MIXING_STEPPERS > 3
|
||||
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); E3_ENABLE_WRITE( E_ENABLE_ON); }
|
||||
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); E3_ENABLE_WRITE(!E_ENABLE_ON); }
|
||||
#elif MIXING_STEPPERS > 2
|
||||
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); E2_ENABLE_WRITE( E_ENABLE_ON); }
|
||||
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); E2_ENABLE_WRITE(!E_ENABLE_ON); }
|
||||
#else
|
||||
#define enable_E0() { E0_ENABLE_WRITE( E_ENABLE_ON); E1_ENABLE_WRITE( E_ENABLE_ON); }
|
||||
#define disable_E0() { E0_ENABLE_WRITE(!E_ENABLE_ON); E1_ENABLE_WRITE(!E_ENABLE_ON); }
|
||||
#endif
|
||||
#define enable_E1() NOOP
|
||||
#define disable_E1() NOOP
|
||||
#define enable_E2() NOOP
|
||||
#define disable_E2() NOOP
|
||||
#define enable_E3() NOOP
|
||||
#define disable_E3() NOOP
|
||||
#define enable_E4() NOOP
|
||||
#define disable_E4() NOOP
|
||||
#define enable_E5() NOOP
|
||||
#define disable_E5() NOOP
|
||||
|
||||
#else // !MIXING_EXTRUDER
|
||||
|
||||
#if HAS_E0_ENABLE
|
||||
#define enable_E0() E0_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E0() E0_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E0() NOOP
|
||||
#define disable_E0() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 1 && HAS_E1_ENABLE
|
||||
#define enable_E1() E1_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E1() E1_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E1() NOOP
|
||||
#define disable_E1() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 2 && HAS_E2_ENABLE
|
||||
#define enable_E2() E2_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E2() E2_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E2() NOOP
|
||||
#define disable_E2() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 3 && HAS_E3_ENABLE
|
||||
#define enable_E3() E3_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E3() E3_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E3() NOOP
|
||||
#define disable_E3() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 4 && HAS_E4_ENABLE
|
||||
#define enable_E4() E4_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E4() E4_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E4() NOOP
|
||||
#define disable_E4() NOOP
|
||||
#endif
|
||||
|
||||
#if E_STEPPERS > 5 && HAS_E5_ENABLE
|
||||
#define enable_E5() E5_ENABLE_WRITE( E_ENABLE_ON)
|
||||
#define disable_E5() E5_ENABLE_WRITE(!E_ENABLE_ON)
|
||||
#else
|
||||
#define enable_E5() NOOP
|
||||
#define disable_E5() NOOP
|
||||
#endif
|
||||
|
||||
#endif // !MIXING_EXTRUDER
|
||||
|
||||
#if ENABLED(EXPERIMENTAL_I2CBUS)
|
||||
#include "feature/twibus.h"
|
||||
extern TWIBus i2c;
|
||||
@@ -210,11 +90,12 @@ extern millis_t max_inactive_time, stepper_inactive_time;
|
||||
extern bool fans_paused;
|
||||
extern uint8_t paused_fan_speed[FAN_COUNT];
|
||||
#endif
|
||||
#define FANS_LOOP(I) LOOP_L_N(I, FAN_COUNT)
|
||||
#endif
|
||||
|
||||
inline void zero_fan_speeds() {
|
||||
#if FAN_COUNT > 0
|
||||
LOOP_L_N(i, FAN_COUNT) fan_speed[i] = 0;
|
||||
FANS_LOOP(i) fan_speed[i] = 0;
|
||||
#endif
|
||||
}
|
||||
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1049,6 +1063,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -585,7 +585,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -804,7 +804,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1047,6 +1061,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -558,7 +558,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -777,7 +777,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1021,6 +1035,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -585,7 +585,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -804,7 +804,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1047,6 +1061,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -594,7 +594,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -813,7 +813,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1056,6 +1070,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,51 +30,36 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38
|
||||
#define STATUS_SCREEN_BED_TEXT_X 73
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 22
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111110,B00001111,B11110000,
|
||||
B11000001,B10000110,B00011000,
|
||||
B11000001,B10000110,B00001100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00011111,B00000110,B00000100,
|
||||
B00000011,B00000110,B00000100,
|
||||
B00000001,B10000110,B00000100,
|
||||
B11000001,B10000110,B00001100,
|
||||
B11000001,B10000110,B00011000,
|
||||
B00111110,B00001111,B11110000
|
||||
};
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00111110,B00001111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B11000001,B10000110,B00011000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B11000001,B10000110,B00001100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00011111,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000011,B00000110,B00000100,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000001,B10000110,B00000100,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B11000001,B10000110,B00001100,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B11000001,B10000110,B00011000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00111110,B00001111,B11110000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,423 +30,44 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
|
||||
// Can also be overridden in Configuration.h
|
||||
#ifndef FAN_ANIM_FRAMES
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#endif
|
||||
#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00111111,B11100001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00111111,B11100001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00000111,B00111101,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000101,B11100111,B00000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000101,B11110111,B00000001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000100,B00000111,B01111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,51 +30,44 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) 38
|
||||
#define STATUS_SCREEN_BED_TEXT_X 73
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 36
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000111,B11001111,B10000000,B00110001,B11100000,
|
||||
B00001111,B11001111,B11000000,B01110011,B11110000,
|
||||
B00001100,B00001100,B01000000,B01110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001100,B00001111,B11001111,B00110011,B00110000,
|
||||
B00001100,B00001101,B10001111,B00110011,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,
|
||||
B00001111,B11001100,B11000000,B00110011,B11110000,
|
||||
B00000111,B11001100,B11000000,B00110001,B11100000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,
|
||||
B00000001,B10000011,B00110000,B00000011,B00000000,
|
||||
B00000001,B10000011,B00110010,B00000011,B00000000,
|
||||
B00000001,B11000111,B00000010,B11100000,B00000000,
|
||||
B00000001,B11000111,B00110011,B11110011,B00000000,
|
||||
B00000001,B11101111,B00110011,B00110011,B00000000,
|
||||
B00000001,B10111011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,
|
||||
B00000001,B10000011,B00110011,B00110011,B00000000
|
||||
};
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000111,B11001111,B10000000,B00110001,B11100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00001111,B11001111,B11000000,B01110011,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00001100,B00001100,B01000000,B01110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00001100,B00001111,B11001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00001100,B00001101,B10001111,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00001100,B00001100,B11000000,B00110011,B00110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B00001111,B11001100,B11000000,B00110011,B11110000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000111,B11001100,B11000000,B00110001,B11100000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000001,B10000011,B00110000,B00000011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000001,B10000011,B00110010,B00000011,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000001,B11000111,B00000010,B11100000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000001,B11000111,B00110011,B11110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000001,B11101111,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000001,B10111011,B00110011,B00110011,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000001,B10010011,B00110011,B00110011,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000001,B10000011,B00110011,B00110011,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,101 +30,36 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 5
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000110,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B11111110,B00000000,B00000010,B00000000,B00000000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B01000010,B00000000,B00000010,B00000000,B00000000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B01001000,B00000000,B00000010,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B01001000,B11011100,B00111110,B00111100,B11101110,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B01111000,B01100010,B01000010,B01000010,B00110010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
|
||||
B01001000,B01000010,B01000010,B01000010,B00100000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B01001000,B01000010,B01000010,B01111110,B00100000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B01000000,B01000010,B01000010,B01000000,B00100000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
|
||||
B01000010,B01000010,B01000110,B01000010,B00100000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
|
||||
B11111110,B11100111,B00111011,B00111100,B11111000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,101 +30,32 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (38 + (E) * 20)
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 8
|
||||
#define STATUS_LOGO_WIDTH 39
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#define STATUS_HEATERS_XSPACE 20
|
||||
#if HOTENDS < 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B01111011,B11010000,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101110,B00110001,B11010000,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B11111000,B00000001,B10000000,B00000000,B00001100,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B01001000,B00000000,B10000000,B00000000,B00010010,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B01000011,B11000011,B10001100,B11010000,B00000010,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B01110001,B00100100,B10010010,B01100111,B11001100,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B01000001,B00100100,B10011110,B01000000,B00000010,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
|
||||
B01001001,B00100100,B10010000,B01000000,B00010010,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B11111011,B10110011,B11001110,B11100000,B00001100,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_HEATERS_X 48
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -751,19 +751,19 @@
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#if ENABLED(X_SpreadCycle) || !ENABLED(X_2208)
|
||||
#define DEFAULT_XJERK 20.0
|
||||
#if ENABLED(X_SpreadCycle) || DISABLED(X_2208)
|
||||
#define DEFAULT_XJERK 20.0
|
||||
#else
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#endif
|
||||
|
||||
#if ENABLED(Y_SpreadCycle) || !ENABLED(Y_2208)
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#if ENABLED(Y_SpreadCycle) || DISABLED(Y_2208)
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#else
|
||||
#define DEFAULT_YJERK 5.0
|
||||
#define DEFAULT_YJERK 5.0
|
||||
#endif
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
#define DEFAULT_EJERK 5.0
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
/**
|
||||
* S-Curve Acceleration
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1050,6 +1064,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,422 +30,45 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//============================================
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 3
|
||||
#define STATUS_LOGO_WIDTH 24
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (41 + (E) * 20)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,
|
||||
B10000000,B00000000,B00000001,
|
||||
B10001110,B00000000,B11100001,
|
||||
B10011111,B00000001,B11110001,
|
||||
B10010011,B10000001,B00111001,
|
||||
B10011111,B10000001,B11111001,
|
||||
B10011111,B10000001,B11111001,
|
||||
B10011111,B10111001,B11111001,
|
||||
B10001111,B00101000,B11110001,
|
||||
B10000000,B00111000,B00000001,
|
||||
B10000000,B00000000,B00000001,
|
||||
B10011111,B11111111,B11111001,
|
||||
B10010001,B01110100,B10011001,
|
||||
B10011011,B00000110,B10101001,
|
||||
B10011011,B01010100,B10101001,
|
||||
B10011011,B01010110,B10101001,
|
||||
B10011011,B01010100,B10011001,
|
||||
B10011111,B11111111,B11111001,
|
||||
B11111111,B11111111,B11111111
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -242,6 +242,9 @@
|
||||
// Offset of the extruders (uncomment if using more than one and relying on firmware to position when changing).
|
||||
// The offset has to be X=0, Y=0 for the extruder 0 hotend (default extruder).
|
||||
// For the other hotends it is their distance from the extruder 0 hotend.
|
||||
//#define HOTEND_OFFSET_X {0.0, 20.00} // (mm) relative X-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Y {0.0, 5.00} // (mm) relative Y-offset for each nozzle
|
||||
//#define HOTEND_OFFSET_Z {0.0, 0.00} // (mm) relative Z-offset for each nozzle
|
||||
|
||||
#ifdef ROXYs_TRex
|
||||
#define HOTEND_OFFSET_X {0.0, 0.00} // (mm) for each extruder, offset of the hotend on the X axis
|
||||
@@ -665,7 +668,6 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
|
||||
*/
|
||||
//#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 93 }
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 800, 93 }
|
||||
|
||||
/**
|
||||
@@ -673,7 +675,6 @@
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4[, E5]]]]]
|
||||
*/
|
||||
//#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, 100, 5, 25 }
|
||||
|
||||
/**
|
||||
@@ -692,11 +693,6 @@
|
||||
* M204 R Retract Acceleration
|
||||
* M204 T Travel Acceleration
|
||||
*/
|
||||
|
||||
//#define DEFAULT_ACCELERATION 3000 // X, Y, Z and E acceleration for printing moves
|
||||
//#define DEFAULT_RETRACT_ACCELERATION 3000 // E acceleration for retracts
|
||||
//#define DEFAULT_TRAVEL_ACCELERATION 3000 // X, Y, Z acceleration for travel (non printing) moves
|
||||
|
||||
#define DEFAULT_ACCELERATION 1500 // X, Y, Z and E acceleration for printing moves
|
||||
#define DEFAULT_RETRACT_ACCELERATION 1500 // E acceleration for retracts
|
||||
#define DEFAULT_TRAVEL_ACCELERATION 1500 // X, Y, Z acceleration for travel (non printing) moves
|
||||
@@ -709,11 +705,6 @@
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
//#define DEFAULT_XJERK 20.0
|
||||
//#define DEFAULT_YJERK 10.0
|
||||
//#define DEFAULT_ZJERK 0.4
|
||||
//#define DEFAULT_EJERK 5.0
|
||||
|
||||
#define DEFAULT_XJERK 12.0 // More conservitive numbers.
|
||||
#define DEFAULT_YJERK 8.0
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
@@ -801,6 +792,7 @@
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
#endif
|
||||
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
//#define SOLENOID_PROBE
|
||||
|
||||
@@ -846,7 +838,7 @@
|
||||
#define MIN_PROBE_EDGE 0
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 7000
|
||||
#define XY_PROBE_SPEED 5000
|
||||
|
||||
// Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
|
||||
#define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
|
||||
@@ -876,7 +868,7 @@
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 7 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 7 // Z Clearance between probe points
|
||||
#define Z_CLEARANCE_MULTI_PROBE 5 // Z Clearance between multiple probes
|
||||
#define Z_AFTER_PROBING 7 // Z position after probing is done
|
||||
#define Z_AFTER_PROBING 10 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
@@ -970,11 +962,7 @@
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS 450
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#if ENABLED(tallVersion)
|
||||
#define Z_MAX_POS 700
|
||||
#else
|
||||
#define Z_MAX_POS 500
|
||||
#endif
|
||||
#define Z_MAX_POS 700
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
@@ -1110,7 +1098,7 @@
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_HOTEND_TEMP 205.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_HOTEND_TEMP 208.0 // (°C) Default nozzle temperature for the G26 Mesh Validation Tool.
|
||||
#define MESH_TEST_BED_TEMP 60.0 // (°C) Default bed temperature for the G26 Mesh Validation Tool.
|
||||
#endif
|
||||
|
||||
@@ -1249,8 +1237,8 @@
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_X_POINT (((X_BED_SIZE) / 2) - 15) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT (((Y_BED_SIZE) / 2) - 15) // Y point for Z homing when homing all axes (G28).
|
||||
#endif
|
||||
|
||||
// Homing speeds (mm/m)
|
||||
@@ -1484,7 +1472,7 @@
|
||||
*
|
||||
* View the current statistics with M78.
|
||||
*/
|
||||
#define PRINTCOUNTER
|
||||
//#define PRINTCOUNTER
|
||||
|
||||
//=============================================================================
|
||||
//============================= LCD and SD support ============================
|
||||
|
||||
@@ -219,7 +219,7 @@
|
||||
*
|
||||
* Define one or both of these to override the default 0-255 range.
|
||||
*/
|
||||
#define FAN_MIN_PWM 64
|
||||
#define FAN_MIN_PWM 45
|
||||
//#define FAN_MAX_PWM 128
|
||||
|
||||
// @section extruder
|
||||
@@ -365,12 +365,12 @@
|
||||
*/
|
||||
#define DUAL_X_CARRIAGE
|
||||
#if ENABLED(DUAL_X_CARRIAGE)
|
||||
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X1_MAX_POS X_BED_SIZE // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
#define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed
|
||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||
#define X1_MIN_POS X_MIN_POS // set minimum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X1_MAX_POS (X_BED_SIZE) // set maximum to ensure first x-carriage doesn't hit the parked second X-carriage
|
||||
#define X2_MIN_POS 0 // set minimum to ensure second x-carriage doesn't hit the parked first X-carriage
|
||||
#define X2_MAX_POS (442-4.0) // set maximum to the distance between toolheads when both heads are homed
|
||||
#define X2_HOME_DIR 1 // the second X-carriage always homes to the maximum endstop position
|
||||
#define X2_HOME_POS X2_MAX_POS // default home position is the maximum carriage position
|
||||
// However: In this mode the HOTEND_OFFSET_X value for the second extruder provides a software
|
||||
// override for X2_HOME_POS. This also allow recalibration of the distance between the two endstops
|
||||
// without modifying the firmware (through the "M218 T1 X???" command).
|
||||
@@ -809,7 +809,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -849,6 +863,7 @@
|
||||
#if ENABLED(MOVE_Z_WHEN_IDLE)
|
||||
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
|
||||
#endif
|
||||
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
@@ -1052,6 +1067,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
@@ -1061,7 +1080,7 @@
|
||||
* 'M106 P<fan> T2' : Use the set secondary speed
|
||||
* 'M106 P<fan> T1' : Restore the previous fan speed
|
||||
*/
|
||||
#define EXTRA_FAN_SPEED
|
||||
//#define EXTRA_FAN_SPEED
|
||||
|
||||
/**
|
||||
* Firmware-based and LCD-controlled retract
|
||||
@@ -1162,19 +1181,19 @@
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 4 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 0 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 500 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 0 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 1 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT (3*60) // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
@@ -1712,20 +1731,24 @@
|
||||
//#define CUSTOM_USER_MENUS
|
||||
#if ENABLED(CUSTOM_USER_MENUS)
|
||||
//#define CUSTOM_USER_MENU_TITLE "Custom Commands"
|
||||
//#define USER_SCRIPT_AUDIBLE_FEEDBACK
|
||||
#define USER_SCRIPT_RETURN // Return to status screen after a script
|
||||
#define USER_SCRIPT_DONE "M117 User Script Done"
|
||||
#define USER_SCRIPT_AUDIBLE_FEEDBACK
|
||||
//#define USER_SCRIPT_RETURN // Return to status screen after a script
|
||||
|
||||
#define USER_DESC_1 "User cmd 1"
|
||||
#define USER_GCODE_1 "G28 X \n"
|
||||
#define USER_DESC_1 "Home & UBL Info"
|
||||
#define USER_GCODE_1 "G28\nG29 W"
|
||||
|
||||
#define USER_DESC_2 "User cmd 2"
|
||||
#define USER_GCODE_2 "G28 \nG1 X100 \n"
|
||||
#define USER_DESC_2 "Preheat for " PREHEAT_1_LABEL
|
||||
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
|
||||
|
||||
#define USER_DESC_3 "User cmd 3"
|
||||
#define USER_GCODE_3 "M48 \n"
|
||||
#define USER_DESC_3 "Preheat for " PREHEAT_2_LABEL
|
||||
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
|
||||
|
||||
#define USER_DESC_4 "User cmd 4"
|
||||
#define USER_GCODE_4 "M114 \n"
|
||||
#define USER_DESC_4 "Heat Bed/Home/Level"
|
||||
#define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
|
||||
|
||||
#define USER_DESC_5 "Home & Info"
|
||||
#define USER_GCODE_5 "G28\nM503"
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1851,7 +1874,7 @@
|
||||
|
||||
#define MAX7219_GCODE // Add the M7219 G-code to control the LED matrix
|
||||
#define MAX7219_INIT_TEST 2 // Do a test pattern at initialization (Set to 2 for spiral)
|
||||
#define MAX7219_NUMBER_UNITS 2 // Number of Max7219 units in chain.
|
||||
#define MAX7219_NUMBER_UNITS 3 // Number of Max7219 units in chain.
|
||||
#define MAX7219_ROTATE 0 // Rotate the display clockwise (in multiples of +/- 90°)
|
||||
// connector at: right=0 bottom=-90 top=90 left=180
|
||||
#define MAX7219_REVERSE_ORDER // The individual LED matrix units may be in reversed order
|
||||
|
||||
@@ -29,102 +29,45 @@
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
//#include "MarlinConfig.h"
|
||||
|
||||
//============================================
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 4
|
||||
#define STATUS_LOGO_WIDTH 21
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (27 + (E) * 25)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X 81
|
||||
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y 28
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B00011110,B00000000,
|
||||
B00000000,B11111111,B10000000,
|
||||
B00000001,B11111111,B11100000,
|
||||
B00000111,B00000000,B00000000,
|
||||
B00001111,B00000000,B00000000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00000000,B00000000,
|
||||
B00011111,B00000000,B00000000,
|
||||
B00001111,B00001111,B11111000,
|
||||
B00000111,B00001111,B11110000,
|
||||
B00000011,B00001111,B11000000,
|
||||
B00000001,B00001111,B00000000,
|
||||
B00000000,B00001100,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
|
||||
#error "Single hotend bitmap not available."
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
#error "Under 3 FAN_ANIM_FRAMES not available."
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00011110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B01111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00111110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B01111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00111110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
#error "4 FAN_ANIM_FRAMES not available."
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -591,7 +591,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -810,7 +810,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1053,6 +1067,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -30,102 +30,44 @@
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//#include "MarlinConfig.h"
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 4
|
||||
#define STATUS_LOGO_WIDTH 21
|
||||
|
||||
//============================================
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (27 + (E) * 25)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X 81
|
||||
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#define STATUS_SCREEN_FAN_TEXT_X 103
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y 28
|
||||
|
||||
//============================================
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
B00000000,B00011110,B00000000,
|
||||
B00000000,B11111111,B10000000,
|
||||
B00000001,B11111111,B11100000,
|
||||
B00000111,B00000000,B00000000,
|
||||
B00001111,B00000000,B00000000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00001111,B11111000,
|
||||
B00011111,B00000000,B00000000,
|
||||
B00011111,B00000000,B00000000,
|
||||
B00001111,B00001111,B11111000,
|
||||
B00000111,B00001111,B11110000,
|
||||
B00000011,B00001111,B11000000,
|
||||
B00000001,B00001111,B00000000,
|
||||
B00000000,B00001100,B00000000
|
||||
};
|
||||
|
||||
//
|
||||
// Use default bitmaps
|
||||
//
|
||||
#define STATUS_HOTEND_ANIM
|
||||
#define STATUS_BED_ANIM
|
||||
#if HOTENDS < 2
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
#endif
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B00111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00011110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B01111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00111110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00000000,B00001111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B01111111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B11111111,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000011,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B00000111,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B00001111,B10000111,B11111100,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000000,B11111111,B00000000,B00000000,B01111111,B10000000,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11110011,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
|
||||
B00001111,B10000111,B11111100,B00000001,B11100111,B10000000,B00000000,B11101101,B11000000,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00001111,B10000111,B11111100,B00000001,B11010111,B10000000,B00000000,B11111101,B11000000,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01111011,B10000000,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
|
||||
B00001111,B10000000,B00000000,B00000000,B11110111,B00000000,B00000000,B01110111,B10000000,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000111,B10000111,B11111100,B00000001,B11110111,B10000000,B00000000,B11101111,B11000000,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000011,B10000111,B11111000,B00000001,B11100011,B10000000,B00000000,B11100001,B11000000,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000001,B10000111,B11100000,B00000001,B11111111,B10000000,B00000000,B11111111,B11000000,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B10000111,B10000000,B00000000,B01111110,B00000000,B00000000,B01111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B00000110,B00000000,B00000000,B00111100,B00000000,B00000000,B00111110,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00011000,B00000000,B00000000,B00001100,B00000000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
#error "4 FAN_ANIM_FRAMES not available."
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
#define STATUS_LOGO_X 8
|
||||
#define STATUS_HEATERS_X 40
|
||||
#define STATUS_BED_X 72
|
||||
#else
|
||||
#define STATUS_LOGO_X 0
|
||||
#define STATUS_HEATERS_X 32
|
||||
#define STATUS_BED_X 80
|
||||
#endif
|
||||
|
||||
@@ -2035,8 +2035,8 @@
|
||||
*/
|
||||
#if ENABLED(ULTIMAKERCONTROLLER) || ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER) || ENABLED(G3D_PANEL) || ENABLED(MKS_MINI_12864)
|
||||
#define SDSUPPORT // Force SD Card support on for these displays
|
||||
#else
|
||||
#define LCD_WIDTH_OVERRIDE 20 // Default is 22. For this Geeetech use 20.
|
||||
#elif DISABLED(LIGHTWEIGHT_UI)
|
||||
#define LCD_WIDTH 20 // Default is 22. For this Geeetech use 20.
|
||||
#endif
|
||||
|
||||
// Allow servo angle to be edited and saved to EEPROM
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1049,6 +1063,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -587,7 +587,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -813,7 +813,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1056,6 +1070,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
File diff suppressed because it is too large
Load Diff
File diff suppressed because it is too large
Load Diff
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -599,7 +599,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -818,7 +818,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1061,6 +1075,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -586,7 +586,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -805,7 +805,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1048,6 +1062,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -588,7 +588,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -807,7 +807,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1050,6 +1064,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
@@ -588,7 +588,7 @@
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
#if HAS_PRINT_PROGRESS
|
||||
#if HAS_CHARACTER_LCD && HAS_PRINT_PROGRESS
|
||||
//#define LCD_PROGRESS_BAR // Show a progress bar on HD44780 LCDs for SD printing
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
#define PROGRESS_BAR_BAR_TIME 2000 // (ms) Amount of time to show the bar
|
||||
@@ -807,7 +807,21 @@
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#endif // DOGLCD
|
||||
/**
|
||||
* Status (Info) Screen customizations
|
||||
* These options may affect code size and screen render time.
|
||||
* Custom status screens can forcibly override these settings.
|
||||
*/
|
||||
//#define STATUS_COMBINE_HEATERS // Use combined heater images instead of separate ones
|
||||
//#define STATUS_HOTEND_NUMBERLESS // Use plain hotend icons instead of numbered ones (with 2+ hotends)
|
||||
#define STATUS_HOTEND_INVERTED // Show solid nozzle bitmaps when heating (Requires STATUS_HOTEND_ANIM)
|
||||
#define STATUS_HOTEND_ANIM // Use a second bitmap to indicate hotend heating
|
||||
#define STATUS_BED_ANIM // Use a second bitmap to indicate bed heating
|
||||
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
|
||||
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
|
||||
//#define STATUS_HEAT_PERCENT // Show heating in a progress bar
|
||||
|
||||
#endif // HAS_GRAPHICAL_LCD
|
||||
|
||||
// @section safety
|
||||
|
||||
@@ -1050,6 +1064,10 @@
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
#define SERIAL_OVERRUN_PROTECTION
|
||||
|
||||
// @section extras
|
||||
|
||||
/**
|
||||
|
||||
Some files were not shown because too many files have changed in this diff Show More
Reference in New Issue
Block a user