Fix borked search / replace

Marlin/src/module/endstops.cpp

@@ -284,7 +284,7 @@ void Endstops::init() {
     SET_INPUT(PROBE_ENABLE_PIN)
   #endif
 
-  #if ENABLED(PROBE_CAN_TARE
+  #if ENABLED(PROBE_CAN_TARE)
     probe.tare_z_probe();
   #endif
 

Marlin/src/module/motion.cpp

@@ -1603,7 +1603,7 @@ void homeaxis(const AxisEnum axis) {
     if (axis == Z_AXIS && bltouch.deploy()) return; // The initial DEPLOY
   #endif
 
-  #if ENABLED(PROBE_CAN_TARE
+  #if ENABLED(PROBE_CAN_TARE)
     if(axis == Z_AXIS)
       if (probe.tare_z_probe()) return;
   #endif

Marlin/src/module/probe.cpp

@@ -479,7 +479,7 @@ bool Probe::probe_down_to_z(const float z, const feedRate_t fr_mm_s) {
   return !probe_triggered;
 }
 
-#if ENABLED(PROBE_CAN_TARE
+#if ENABLED(PROBE_CAN_TARE)
 bool Probe::tare_z_probe() {
   #if ENABLED(PROBE_TARE_WHILE_INACTIVEACTIVE)
     if ((READ(PROBE_ENABLE_PIN) == PROBE_ENABLED_INPUTT_STATE)) {
@@ -513,7 +513,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) {
   auto try_to_probe = [&](PGM_P const plbl, const float &z_probe_low_point, const feedRate_t fr_mm_s, const bool scheck, const float clearance) {
     // Do a first probe at the fast speed
 
-    #if ENABLED(PROBE_CAN_TARE
+    #if ENABLED(PROBE_CAN_TARE)
       if(tare_z_probe()) return NAN;
     #endif
 
@@ -541,7 +541,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) {
   #if TOTAL_PROBING == 2
 
     // Do a first probe at the fast speed
-    #if ENABLED(PROBE_CAN_TARE
+    #if ENABLED(PROBE_CAN_TARE)
       if(tare_z_probe()) return NAN;
     #endif
 
@@ -583,7 +583,7 @@ float Probe::run_z_probe(const bool sanity_check/*=true*/) {
   #endif
     {
       // Probe downward slowly to find the bed
-      #if ENABLED(PROBE_CAN_TARE
+      #if ENABLED(PROBE_CAN_TARE)
         if(tare_z_probe()) return true;
       #endif
       if (try_to_probe(PSTR("SLOW"), z_probe_low_point, MMM_TO_MMS(Z_PROBE_SPEED_SLOW),