more config
This commit is contained in:
InsanityAutomation
+20
-20
@@ -70,7 +70,7 @@
|
||||
// @section info
|
||||
|
||||
// Author info of this build printed to the host during boot and M115
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "3DXtech / Insanity Automation" // Who made the changes.
|
||||
//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
|
||||
|
||||
/**
|
||||
@@ -88,10 +88,10 @@
|
||||
#define SHOW_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
||||
// @section machine
|
||||
|
||||
@@ -144,7 +144,7 @@
|
||||
#define EXTRUDERS 1
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
//#define SINGLENOZZLE
|
||||
@@ -426,11 +426,11 @@
|
||||
//#define TEMP_SENSOR_1_AS_REDUNDANT
|
||||
#define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
|
||||
|
||||
#define TEMP_RESIDENCY_TIME 10 // (seconds) Time to wait for hotend to "settle" in M109
|
||||
#define TEMP_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define TEMP_RESIDENCY_TIME 3 // (seconds) Time to wait for hotend to "settle" in M109
|
||||
#define TEMP_WINDOW 3 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
#define TEMP_BED_RESIDENCY_TIME 10 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_RESIDENCY_TIME 5 // (seconds) Time to wait for bed to "settle" in M190
|
||||
#define TEMP_BED_WINDOW 1 // (°C) Temperature proximity for the "temperature reached" timer
|
||||
#define TEMP_BED_HYSTERESIS 3 // (°C) Temperature proximity considered "close enough" to the target
|
||||
|
||||
@@ -470,8 +470,8 @@
|
||||
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
|
||||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
#define PID_EDIT_MENU // Add PID editing to the "Advanced Settings" menu. (~700 bytes of PROGMEM)
|
||||
#define PID_AUTOTUNE_MENU // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of PROGMEM)
|
||||
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
|
||||
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
@@ -516,7 +516,7 @@
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
||||
*/
|
||||
//#define PIDTEMPBED
|
||||
#define PIDTEMPBED
|
||||
|
||||
//#define BED_LIMIT_SWITCHING
|
||||
|
||||
@@ -1128,7 +1128,7 @@
|
||||
#endif
|
||||
|
||||
#if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1205,13 +1205,13 @@
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
//#define MESH_BED_LEVELING
|
||||
#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
* Normally G28 leaves leveling disabled on completion. Enable
|
||||
* this option to have G28 restore the prior leveling state.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
#define RESTORE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
* Enable detailed logging of G28, G29, M48, etc.
|
||||
@@ -1235,7 +1235,7 @@
|
||||
/**
|
||||
* Enable the G26 Mesh Validation Pattern tool.
|
||||
*/
|
||||
//#define G26_MESH_VALIDATION
|
||||
#define G26_MESH_VALIDATION
|
||||
#if ENABLED(G26_MESH_VALIDATION)
|
||||
#define MESH_TEST_NOZZLE_SIZE 0.4 // (mm) Diameter of primary nozzle.
|
||||
#define MESH_TEST_LAYER_HEIGHT 0.2 // (mm) Default layer height for the G26 Mesh Validation Tool.
|
||||
@@ -1299,7 +1299,7 @@
|
||||
//===========================================================================
|
||||
|
||||
#define MESH_INSET 10 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 3 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_X 5 // Don't use more than 7 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
//#define MESH_G28_REST_ORIGIN // After homing all axes ('G28' or 'G28 XYZ') rest Z at Z_MIN_POS
|
||||
@@ -1310,22 +1310,22 @@
|
||||
* Add a bed leveling sub-menu for ABL or MBL.
|
||||
* Include a guided procedure if manual probing is enabled.
|
||||
*/
|
||||
//#define LCD_BED_LEVELING
|
||||
#define LCD_BED_LEVELING
|
||||
|
||||
#if ENABLED(LCD_BED_LEVELING)
|
||||
#define MESH_EDIT_Z_STEP 0.025 // (mm) Step size while manually probing Z axis.
|
||||
#define LCD_PROBE_Z_RANGE 4 // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
//#define MESH_EDIT_MENU // Add a menu to edit mesh points
|
||||
#define MESH_EDIT_MENU // Add a menu to edit mesh points
|
||||
#endif
|
||||
|
||||
// Add a menu item to move between bed corners for manual bed adjustment
|
||||
//#define LEVEL_BED_CORNERS
|
||||
#define LEVEL_BED_CORNERS
|
||||
|
||||
#if ENABLED(LEVEL_BED_CORNERS)
|
||||
#define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
|
||||
#define LEVEL_CORNERS_HEIGHT 0.0 // (mm) Z height of nozzle at leveling points
|
||||
#define LEVEL_CORNERS_Z_HOP 4.0 // (mm) Z height of nozzle between leveling points
|
||||
//#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
#define LEVEL_CENTER_TOO // Move to the center after the last corner
|
||||
#endif
|
||||
|
||||
/**
|
||||
|
||||
+33
-33
@@ -118,8 +118,8 @@
|
||||
*/
|
||||
#if TEMP_SENSOR_CHAMBER
|
||||
#define CHAMBER_MINTEMP 5
|
||||
#define CHAMBER_MAXTEMP 60
|
||||
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
|
||||
#define CHAMBER_MAXTEMP 100
|
||||
#define TEMP_CHAMBER_HYSTERESIS 5 // (°C) Temperature proximity considered "close enough" to the target
|
||||
//#define CHAMBER_LIMIT_SWITCHING
|
||||
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
|
||||
//#define HEATER_CHAMBER_INVERTING false
|
||||
@@ -150,11 +150,11 @@
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 15 // Degrees Celsius
|
||||
|
||||
//#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#define ADAPTIVE_FAN_SLOWING // Slow part cooling fan if temperature drops
|
||||
#if BOTH(ADAPTIVE_FAN_SLOWING, PIDTEMP)
|
||||
//#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#define NO_FAN_SLOWING_IN_PID_TUNING // Don't slow fan speed during M303
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -169,7 +169,7 @@
|
||||
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
|
||||
* below 2.
|
||||
*/
|
||||
#define WATCH_TEMP_PERIOD 20 // Seconds
|
||||
#define WATCH_TEMP_PERIOD 30 // Seconds
|
||||
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
@@ -184,20 +184,20 @@
|
||||
* As described above, except for the bed (M140/M190/M303).
|
||||
*/
|
||||
#define WATCH_BED_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_BED_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#define WATCH_BED_TEMP_INCREASE 1 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Thermal Protection parameters for the heated chamber.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_CHAMBER)
|
||||
#define THERMAL_PROTECTION_CHAMBER_PERIOD 20 // Seconds
|
||||
#define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // Degrees Celsius
|
||||
#define THERMAL_PROTECTION_CHAMBER_PERIOD 60 // Seconds
|
||||
#define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 5 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Heated chamber watch settings (M141/M191).
|
||||
*/
|
||||
#define WATCH_CHAMBER_TEMP_PERIOD 60 // Seconds
|
||||
#define WATCH_CHAMBER_TEMP_PERIOD 360 // Seconds
|
||||
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
@@ -447,15 +447,15 @@
|
||||
/**
|
||||
* M355 Case Light on-off / brightness
|
||||
*/
|
||||
//#define CASE_LIGHT_ENABLE
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
//#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
|
||||
//#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
|
||||
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
|
||||
#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
|
||||
#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
|
||||
//#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
|
||||
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
|
||||
#define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
|
||||
@@ -595,7 +595,7 @@
|
||||
#define Y_HOME_BUMP_MM 5
|
||||
#define Z_HOME_BUMP_MM 2
|
||||
#define HOMING_BUMP_DIVISOR { 2, 2, 4 } // Re-Bump Speed Divisor (Divides the Homing Feedrate)
|
||||
//#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
|
||||
#define QUICK_HOME // If homing includes X and Y, do a diagonal move initially
|
||||
//#define HOMING_BACKOFF_MM { 2, 2, 2 } // (mm) Move away from the endstops after homing
|
||||
|
||||
// When G28 is called, this option will make Y home before X
|
||||
@@ -992,16 +992,16 @@
|
||||
#endif // HAS_LCD_MENU
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
#define LCD_SET_PROGRESS_MANUALLY
|
||||
|
||||
// Show the E position (filament used) during printing
|
||||
//#define LCD_SHOW_E_TOTAL
|
||||
@@ -1115,10 +1115,10 @@
|
||||
#endif
|
||||
|
||||
// This allows hosts to request long names for files and folders with M33
|
||||
//#define LONG_FILENAME_HOST_SUPPORT
|
||||
#define LONG_FILENAME_HOST_SUPPORT
|
||||
|
||||
// Enable this option to scroll long filenames in the SD card menu
|
||||
//#define SCROLL_LONG_FILENAMES
|
||||
#define SCROLL_LONG_FILENAMES
|
||||
|
||||
// Leave the heaters on after Stop Print (not recommended!)
|
||||
//#define SD_ABORT_NO_COOLDOWN
|
||||
@@ -1140,7 +1140,7 @@
|
||||
/**
|
||||
* Auto-report SdCard status with M27 S<seconds>
|
||||
*/
|
||||
//#define AUTO_REPORT_SD_STATUS
|
||||
#define AUTO_REPORT_SD_STATUS
|
||||
|
||||
/**
|
||||
* Support for USB thumb drives using an Arduino USB Host Shield or
|
||||
@@ -1464,20 +1464,20 @@
|
||||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
#define INTEGRATED_BABYSTEPPING // EXPERIMENTAL integration of babystepping into the Stepper ISR
|
||||
//#define BABYSTEP_WITHOUT_HOMING
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 1 // Babysteps are very small. Increase for faster motion.
|
||||
#define BABYSTEP_MULTIPLICATOR_Z 20 // Babysteps are very small. Increase for faster motion.
|
||||
#define BABYSTEP_MULTIPLICATOR_XY 1
|
||||
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
//#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
|
||||
#define BABYSTEP_ALWAYS_AVAILABLE // Allow babystepping at all times (not just during movement).
|
||||
//#define MOVE_Z_WHEN_IDLE // Jump to the move Z menu on doubleclick when printer is idle.
|
||||
#if ENABLED(MOVE_Z_WHEN_IDLE)
|
||||
#define MOVE_Z_IDLE_MULTIPLICATOR 1 // Multiply 1mm by this factor for the move step size.
|
||||
@@ -1489,7 +1489,7 @@
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Combine M851 Z and Babystepping
|
||||
#if ENABLED(BABYSTEP_ZPROBE_OFFSET)
|
||||
//#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
|
||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#endif
|
||||
#endif
|
||||
|
||||
@@ -1767,10 +1767,10 @@
|
||||
// Therefore some clients abort after 30 seconds in a timeout.
|
||||
// Some other clients start sending commands while receiving a 'wait'.
|
||||
// This "wait" is only sent when the buffer is empty. 1 second is a good value here.
|
||||
//#define NO_TIMEOUTS 1000 // Milliseconds
|
||||
#define NO_TIMEOUTS 1000 // Milliseconds
|
||||
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
#define ADVANCED_OK
|
||||
|
||||
// Printrun may have trouble receiving long strings all at once.
|
||||
// This option inserts short delays between lines of serial output.
|
||||
@@ -1899,7 +1899,7 @@
|
||||
#define FILAMENT_UNLOAD_PURGE_FEEDRATE 25 // (mm/s) feedrate to purge before unload
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 2 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
@@ -2878,9 +2878,9 @@
|
||||
* Host Prompt Support enables Marlin to use the host for user prompts so
|
||||
* filament runout and other processes can be managed from the host side.
|
||||
*/
|
||||
//#define HOST_ACTION_COMMANDS
|
||||
#define HOST_ACTION_COMMANDS
|
||||
#if ENABLED(HOST_ACTION_COMMANDS)
|
||||
//#define HOST_PROMPT_SUPPORT
|
||||
#define HOST_PROMPT_SUPPORT
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -2888,7 +2888,7 @@
|
||||
*
|
||||
* Implement M486 to allow Marlin to skip objects
|
||||
*/
|
||||
//#define CANCEL_OBJECTS
|
||||
#define CANCEL_OBJECTS
|
||||
|
||||
/**
|
||||
* I2C position encoders for closed loop control.
|
||||
|
||||
@@ -0,0 +1,103 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Bitmap for splashscreen
|
||||
*
|
||||
* You may use one of the following tools to generate the C++ bitmap array from
|
||||
* a black and white image:
|
||||
*
|
||||
* - http://www.marlinfw.org/tools/u8glib/converter.html
|
||||
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 125
|
||||
//#define CUSTOM_BOOTSCREEN_INVERTED
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ..............................................................##................................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x60,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ..............................................................##.##.............................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x88,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................#...#...........................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xE7,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................###..###........................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x71,0x80,0x00,0x00,0x00,0x00,0x00,0x00, // .................................................................###...##.......................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x30,0x40,0x00,0x00,0x00,0x00,0x00,0x00, // ..................................................................##.....#......................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x3C,0x20,0x00,0x00,0x00,0x00,0x00,0x00, // ..................................................................####....#.....................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0xFF,0x20,0x00,0x00,0x00,0x00,0x00,0x00, // ................................................................########..#.....................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x01,0xF8,0x00,0x87,0xF8,0x00,0x00,0x00,0x00,0x00,0x00, // ...............................................######...........#....########...................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x03,0x0C,0x00,0x83,0xE0,0x00,0x00,0x00,0x00,0x00,0x00, // ..............................................##....##..........#.....#####.....................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x06,0x0C,0x00,0x81,0xC0,0x00,0x00,0x00,0x00,0x00,0x00, // .............................................##.....##..........#......###......................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x0C,0x06,0x00,0x80,0xE3,0x00,0x00,0x00,0x00,0x00,0x00, // ............................................##.......##.........#.......###...##................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x18,0x06,0x00,0x80,0x6F,0x80,0x00,0x00,0x00,0x00,0x00, // ...........................................##........##.........#........##.#####...............................................
|
||||
0x00,0x00,0x00,0x00,0x1C,0x38,0x02,0x00,0x80,0x3C,0xC0,0x00,0x00,0x00,0x00,0x00, // ...................................###....###.........#.........#.........####..##..............................................
|
||||
0x00,0x00,0x00,0x00,0x1F,0x30,0x03,0x00,0xC0,0x3C,0x60,0x00,0x00,0x00,0x00,0x00, // ...................................#####..##..........##........##........####...##.............................................
|
||||
0x00,0x00,0x00,0x00,0x77,0xB0,0x02,0xFF,0x60,0x3C,0x30,0x00,0x00,0x00,0x00,0x00, // .................................###.####.##..........#.########.##.......####....##............................................
|
||||
0x00,0x00,0x00,0x00,0xE0,0xF8,0x06,0xFF,0xB0,0x3C,0x18,0x00,0x00,0x00,0x00,0x00, // ................................###.....#####........##.#########.##......####.....##...........................................
|
||||
0x00,0x00,0x00,0x00,0xC0,0xD8,0x0D,0x81,0x98,0x1C,0x08,0x00,0x00,0x00,0x00,0x00, // ................................##......##.##.......##.##......##..##......###......#...........................................
|
||||
0x00,0x00,0x00,0x03,0x80,0xD8,0x09,0x80,0xDC,0xFC,0x08,0x00,0x00,0x00,0x00,0x00, // ..............................###.......##.##.......#..##.......##.###..######......#...........................................
|
||||
0x00,0x00,0x00,0x02,0x00,0xD8,0x1B,0x00,0x6F,0xE4,0x0C,0x00,0x00,0x00,0x00,0x00, // ..............................#.........##.##......##.##.........##.#######..#......##..........................................
|
||||
0x00,0x00,0x00,0x02,0x00,0xDF,0xFB,0x00,0x37,0x06,0x0C,0x00,0x00,0x00,0x00,0x00, // ..............................#.........##.##########.##..........##.###.....##.....##..........................................
|
||||
0x00,0x00,0x00,0x06,0x00,0xE7,0xF6,0x00,0x18,0x03,0x04,0x00,0x00,0x00,0x00,0x00, // .............................##.........###..#######.##............##.........##.....#..........................................
|
||||
0x00,0x00,0x00,0x06,0x00,0xE0,0x0E,0x00,0x18,0x0F,0x04,0x00,0x00,0x00,0x00,0x00, // .............................##.........###.........###............##.......####.....#..........................................
|
||||
0x00,0x00,0x00,0x06,0x00,0xC0,0x2E,0x00,0x1B,0xFF,0xC6,0x00,0x00,0x00,0x00,0x00, // .............................##.........##........#.###............##.############...##.........................................
|
||||
0x3F,0xFC,0x1F,0xF6,0x7D,0x81,0xE6,0x00,0x1B,0xC7,0xC6,0x00,0x00,0x00,0x00,0x00, // ..############.....#########.##..#####.##......####..##............##.####...#####...##.........................................
|
||||
0x7F,0xFE,0x3F,0xFF,0x1F,0x8F,0xC3,0xFF,0xFF,0xFF,0xFC,0x1F,0xFF,0x38,0x03,0xC0, // .##############...##############...######...######....################################.....#############..###.........####......
|
||||
0xFF,0xFF,0xFF,0xFF,0x8F,0x1F,0xC7,0xFF,0xFF,0xFF,0xF8,0xFF,0xFF,0x3C,0x03,0xE0, // #################################...####...#######...################################...################..####........#####.....
|
||||
0x10,0x0F,0xF0,0x0F,0x8F,0xFF,0x83,0xFF,0xF7,0xFF,0xF8,0xFF,0xFC,0x3C,0x03,0xE0, // ...#........########........#####...#############.....##############.################...##############....####........#####.....
|
||||
0x00,0x0F,0xF0,0x07,0xFF,0xFF,0x01,0x9E,0x27,0xFC,0xC2,0xF8,0x00,0x3E,0x03,0xE0, // ............########.........###################.......##..####...#..#########..##....#.#####.............#####.......#####.....
|
||||
0x0F,0xFF,0xF0,0x03,0xDF,0xFE,0x01,0xCE,0x6C,0xFC,0x47,0xF8,0x00,0x3F,0xFF,0xE0, // ....################..........####.############........###..###..##.##..######...#...########.............#################.....
|
||||
0x1F,0xFF,0xF0,0x03,0xC3,0xFC,0x00,0xFF,0xCC,0xFF,0xFF,0xF0,0x00,0x3F,0xFF,0xE0, // ...#################..........####....########..........##########..##..####################..............#################.....
|
||||
0x1F,0xFF,0xF0,0x03,0xC3,0xFC,0x00,0x0E,0x1C,0xFF,0xF9,0xE0,0x00,0x3F,0xFF,0xE0, // ...#################..........####....########..............###....###..#############..####...............#################.....
|
||||
0x00,0x0F,0xF0,0x0F,0xC7,0xFC,0x00,0x0E,0x1C,0xFF,0xF1,0xE0,0x00,0x3F,0xFF,0xE0, // ............########........######...#########..............###....###..############...####...............#################.....
|
||||
0x00,0x0F,0xF8,0x0F,0x87,0xFE,0x00,0x0E,0x0C,0xF8,0xF0,0xF0,0x00,0x3C,0x03,0xE0, // ............#########.......#####....##########.............###.....##..#####...####....####..............####........#####.....
|
||||
0x7F,0xFF,0xFF,0xFF,0xBF,0x8F,0x00,0x3F,0xE6,0xF8,0xE0,0xFC,0x00,0x3C,0x03,0xE0, // .################################.#######...####..........#########..##.#####...###.....######............####........#####.....
|
||||
0x7F,0xFF,0xFF,0xFF,0xFF,0x07,0xC0,0xFF,0xE7,0xFF,0xFC,0xFF,0xFF,0x3C,0x03,0xE0, // .#######################################.....#####......###########..#################..################..####........#####.....
|
||||
0xFF,0xFF,0xFF,0xFF,0xFE,0x03,0xE0,0x8E,0x33,0xFF,0xFC,0x1F,0xFF,0x3C,0x03,0xE0, // #######################################.......#####.....#...###...##..################.....#############..####........#####.....
|
||||
0x7F,0xFC,0x3F,0xF0,0x3C,0x01,0xF1,0x9E,0x31,0xFF,0xF9,0x0F,0xFE,0x3C,0x03,0xC0, // .#############....##########......####.........#####...##..####...##...##############..#....###########...####........####......
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x19,0xFF,0xC1,0x00,0x00,0x00,0x00,0x00, // ......................................................##...........##..###########.....#........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x03,0x00,0x0C,0xE0,0xC1,0x00,0x00,0x00,0x00,0x00, // ......................................................##............##..###.....##.....#........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x0C,0x00,0x42,0x00,0x00,0x00,0x00,0x00, // .....................................................##.............##...........#....#.........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x06,0x00,0x06,0x01,0x62,0x00,0x00,0x00,0x00,0x00, // .....................................................##..............##........#.##...#.........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x0C,0x00,0x06,0x3F,0x62,0x00,0x00,0x00,0x00,0x00, // ....................................................##...............##...######.##...#.........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x38,0x0E,0x00,0x0D,0xFD,0xEE,0x00,0x00,0x00,0x00,0x00, // ..........................................###.......###.............##.#######.####.###.........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x7F,0xE6,0x00,0x19,0x81,0xFC,0x00,0x00,0x00,0x00,0x00, // .........................................##########..##............##..##......#######..........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0xEF,0xF7,0x00,0x1B,0x01,0xF0,0x00,0x00,0x00,0x00,0x00, // ........................................###.########.###...........##.##.......#####............................................
|
||||
0x00,0x00,0x00,0x00,0x00,0xC0,0x33,0x00,0x33,0x01,0xC8,0x00,0x00,0x00,0x00,0x00, // ........................................##........##..##..........##..##.......###..#...........................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x80,0x1B,0x00,0x36,0x01,0x98,0x00,0x00,0x00,0x00,0x00, // ........................................#..........##.##..........##.##........##..##...........................................
|
||||
0x00,0x00,0x00,0x00,0x01,0x80,0x0D,0xFF,0xEC,0x01,0xF0,0x00,0x00,0x00,0x00,0x00, // .......................................##...........##.############.##.........#####............................................
|
||||
0x00,0x00,0x00,0x00,0x01,0x00,0x0E,0xFF,0xD8,0x01,0xE0,0x00,0x00,0x00,0x00,0x00, // .......................................#............###.##########.##..........####.............................................
|
||||
0x00,0x00,0x00,0x01,0xF1,0x80,0x06,0x60,0x38,0x07,0xA0,0x00,0x00,0x00,0x00,0x00, // ...............................#####...##............##..##.......###........####.#.............................................
|
||||
0x00,0x00,0x00,0x01,0xFD,0x80,0x03,0x00,0x18,0x05,0x40,0x00,0x00,0x00,0x00,0x00, // ...............................#######.##.............##...........##........#.#.#..............................................
|
||||
0x00,0x00,0x00,0x01,0x8F,0xC0,0x06,0xFF,0xDC,0x0A,0x80,0x00,0x00,0x00,0x00,0x00, // ...............................##...######...........##.##########.###......#.#.#...............................................
|
||||
0x00,0x00,0x00,0x00,0x81,0xE0,0x0C,0xFF,0xCC,0x1F,0x00,0x00,0x00,0x00,0x00,0x00, // ................................#......####.........##..##########..##.....#####................................................
|
||||
0x00,0x00,0x00,0x00,0x81,0xF0,0x0D,0x80,0x6C,0xFE,0x00,0x00,0x00,0x00,0x00,0x00, // ................................#......#####........##.##........##.##..#######.................................................
|
||||
0x00,0x00,0x00,0x00,0x40,0xFE,0x1B,0x00,0x67,0x8C,0x00,0x00,0x00,0x00,0x00,0x00, // .................................#......#######....##.##.........##..####...##..................................................
|
||||
0x00,0x00,0x00,0x00,0x20,0x7F,0xF6,0x00,0x20,0x18,0x00,0x00,0x00,0x00,0x00,0x00, // ..................................#......###########.##...........#........##...................................................
|
||||
0x00,0x00,0x00,0x00,0x10,0x30,0x6E,0x00,0x3F,0xF0,0x00,0x00,0x00,0x00,0x00,0x00, // ...................................#......##.....##.###...........##########....................................................
|
||||
0x00,0x00,0x00,0x00,0x04,0x30,0x0E,0x00,0xFF,0xA0,0x00,0x00,0x00,0x00,0x00,0x00, // .....................................#....##........###.........#########.#.....................................................
|
||||
0x00,0x00,0x00,0x00,0x03,0x30,0x06,0x00,0xE1,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ......................................##..##.........##.........###....#........................................................
|
||||
0x00,0x00,0x00,0x00,0x01,0xF0,0x03,0x03,0xE2,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // .......................................#####..........##......#####...#.........................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x01,0xFF,0x88,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // .......................................................##########...#...........................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x02,0x30,0x00,0x00,0x00,0x00,0x00,0x00,0x00, // ..............................................................#...##............................................................
|
||||
0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x07,0x00,0x00,0x00,0x00,0x00,0x00,0x00,0x00 // .............................................................###................................................................
|
||||
};
|
||||
@@ -0,0 +1,72 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
|
||||
//
|
||||
// Status Screen Logo bitmap
|
||||
//
|
||||
#define STATUS_LOGO_Y 1
|
||||
#define STATUS_LOGO_WIDTH 32
|
||||
|
||||
const unsigned char status_logo_bmp[] PROGMEM = {
|
||||
0x00,0x00,0x00,0x00, // ................................
|
||||
0x00,0x00,0x00,0x00, // ................................
|
||||
0x00,0x00,0x00,0x00, // ................................
|
||||
0x00,0x00,0x10,0x00, // ...................#............
|
||||
0x00,0x00,0x06,0x00, // .....................##.........
|
||||
0x00,0x00,0x00,0x00, // ................................
|
||||
0x01,0x00,0x00,0x00, // .......#........................
|
||||
0x08,0x00,0x01,0x00, // ....#..................#........
|
||||
0x01,0x00,0x41,0x00, // .......#.........#.....#........
|
||||
0x01,0x00,0x02,0x00, // .......#..............#.........
|
||||
0x00,0xE0,0x00,0x00, // ........###.....................
|
||||
0x80,0x08,0x10,0x80, // #...........#......#....#.......
|
||||
0x04,0x00,0x00,0x40, // .....#...................#......
|
||||
0x08,0x00,0x08,0x00, // ....#...............#...........
|
||||
0x10,0x04,0x00,0x00, // ...#.........#..................
|
||||
0x00,0x00,0x00,0x30, // ..........................##....
|
||||
0x00,0x00,0x00,0x20, // ..........................#.....
|
||||
0x00,0x01,0xE8,0x20, // ...............####.#.....#.....
|
||||
0x00,0x00,0x00,0x60, // .........................##.....
|
||||
0x00,0x00,0x02,0x00, // ......................#.........
|
||||
0x00,0x08,0x00,0x00, // ............#...................
|
||||
0x00,0x00,0x01,0x20, // .......................#..#.....
|
||||
0x02,0xE8,0x10,0x60, // ......#.###.#......#.....##.....
|
||||
0x00,0x00,0x00,0x40, // .........................#......
|
||||
0x00,0x03,0xC0,0x60, // ..............####.......##.....
|
||||
0x64,0x00,0x10,0x00, // .##..#.............#............
|
||||
0x04,0x03,0xC0,0x00, // .....#........####..............
|
||||
0x02,0x00,0x20,0x00, // ......#...........#.............
|
||||
0x00,0x28,0x00,0x00, // ..........#.#...................
|
||||
0x00,0x08,0x20,0x00, // ............#.....#.............
|
||||
0x00,0x00,0x40,0x00, // .................#..............
|
||||
0x00,0x00,0x00,0x00 // ................................
|
||||
};
|
||||
@@ -89,24 +89,6 @@
|
||||
#endif
|
||||
#define DEFAULT_PWM_MOTOR_CURRENT {1300, 1300, 1250}
|
||||
|
||||
///////////////UNPOPULATED SOCKETS////////////////
|
||||
|
||||
#define E2_STEP_PIN 49
|
||||
#define E2_DIR_PIN 47
|
||||
#define E2_ENABLE_PIN 48
|
||||
|
||||
#define E3_STEP_PIN 49
|
||||
#define E3_DIR_PIN 47
|
||||
#define E3_ENABLE_PIN 48
|
||||
|
||||
#define E4_STEP_PIN 49
|
||||
#define E4_DIR_PIN 47
|
||||
#define E4_ENABLE_PIN 48
|
||||
|
||||
#define E5_STEP_PIN 49
|
||||
#define E5_DIR_PIN 47
|
||||
#define E5_ENABLE_PIN 48
|
||||
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
|
||||
Reference in New Issue
Block a user