Initial raptor commit
This commit is contained in:
InsanityAutomation
+147
-124
@@ -74,7 +74,7 @@
|
||||
// User-specified version info of this build to display in [Pronterface, etc] terminal window during
|
||||
// startup. Implementation of an idea by Prof Braino to inform user that any changes made to this
|
||||
// build by the user have been successfully uploaded into firmware.
|
||||
#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
|
||||
#define STRING_CONFIG_H_AUTHOR "Tinymachines3D" // Who made the changes.
|
||||
#define SHOW_BOOTSCREEN
|
||||
#define STRING_SPLASH_LINE1 SHORT_BUILD_VERSION // will be shown during bootup in line 1
|
||||
#define STRING_SPLASH_LINE2 WEBSITE_URL // will be shown during bootup in line 2
|
||||
@@ -91,13 +91,20 @@
|
||||
*/
|
||||
|
||||
// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
|
||||
//#define SHOW_CUSTOM_BOOTSCREEN
|
||||
#define SHOW_CUSTOM_BOOTSCREEN
|
||||
|
||||
// Enable to show the bitmap in Marlin/_Statusscreen.h on the status screen.
|
||||
//#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
#define CUSTOM_STATUS_SCREEN_IMAGE
|
||||
|
||||
// @section machine
|
||||
|
||||
|
||||
#define X_2208
|
||||
#define Y_2208
|
||||
#define BED_AC
|
||||
#define RunoutSensor
|
||||
#define UBL
|
||||
|
||||
/**
|
||||
* Select the serial port on the board to use for communication with the host.
|
||||
* This allows the connection of wireless adapters (for instance) to non-default port pins.
|
||||
@@ -116,7 +123,7 @@
|
||||
*
|
||||
* :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000]
|
||||
*/
|
||||
#define BAUDRATE 250000
|
||||
#define BAUDRATE 115200
|
||||
|
||||
// Enable the Bluetooth serial interface on AT90USB devices
|
||||
//#define BLUETOOTH
|
||||
@@ -124,12 +131,12 @@
|
||||
// The following define selects which electronics board you have.
|
||||
// Please choose the name from boards.h that matches your setup
|
||||
#ifndef MOTHERBOARD
|
||||
#define MOTHERBOARD BOARD_RAMPS_14_EFB
|
||||
#define MOTHERBOARD BOARD_RUMBA
|
||||
#endif
|
||||
|
||||
// Optional custom name for your RepStrap or other custom machine
|
||||
// Displayed in the LCD "Ready" message
|
||||
//#define CUSTOM_MACHINE_NAME "3D Printer"
|
||||
#define CUSTOM_MACHINE_NAME "TM3D RaPtOr"
|
||||
|
||||
// Define this to set a unique identifier for this printer, (Used by some programs to differentiate between machines)
|
||||
// You can use an online service to generate a random UUID. (eg http://www.uuidgenerator.net/version4)
|
||||
@@ -142,7 +149,7 @@
|
||||
#define EXTRUDERS 1
|
||||
|
||||
// Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 3.0
|
||||
#define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
|
||||
|
||||
// For Cyclops or any "multi-extruder" that shares a single nozzle.
|
||||
//#define SINGLENOZZLE
|
||||
@@ -306,8 +313,11 @@
|
||||
#define TEMP_SENSOR_2 0
|
||||
#define TEMP_SENSOR_3 0
|
||||
#define TEMP_SENSOR_4 0
|
||||
#define TEMP_SENSOR_BED 0
|
||||
#define TEMP_SENSOR_CHAMBER 0
|
||||
#if(ENABLED(BED_AC))
|
||||
#define TEMP_SENSOR_BED 11
|
||||
#else
|
||||
#define TEMP_SENSOR_BED 1
|
||||
#endif
|
||||
|
||||
// Dummy thermistor constant temperature readings, for use with 998 and 999
|
||||
#define DUMMY_THERMISTOR_998_VALUE 25
|
||||
@@ -341,12 +351,16 @@
|
||||
// When temperature exceeds max temp, your heater will be switched off.
|
||||
// This feature exists to protect your hotend from overheating accidentally, but *NOT* from thermistor short/failure!
|
||||
// You should use MINTEMP for thermistor short/failure protection.
|
||||
#define HEATER_0_MAXTEMP 275
|
||||
#define HEATER_0_MAXTEMP 290
|
||||
#define HEATER_1_MAXTEMP 275
|
||||
#define HEATER_2_MAXTEMP 275
|
||||
#define HEATER_3_MAXTEMP 275
|
||||
#define HEATER_4_MAXTEMP 275
|
||||
#if(ENABLED(BED_AC))
|
||||
#define BED_MAXTEMP 100
|
||||
#else
|
||||
#define BED_MAXTEMP 150
|
||||
#endif
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID Settings ================================
|
||||
@@ -359,7 +373,7 @@
|
||||
#define PID_MAX BANG_MAX // Limits current to nozzle while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
|
||||
#define PID_K1 0.95 // Smoothing factor within any PID loop
|
||||
#if ENABLED(PIDTEMP)
|
||||
//#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
|
||||
#define PID_AUTOTUNE_MENU // Add PID Autotune to the LCD "Temperature" menu to run M303 and apply the result.
|
||||
//#define PID_DEBUG // Sends debug data to the serial port.
|
||||
//#define PID_OPENLOOP 1 // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
|
||||
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
|
||||
@@ -371,49 +385,42 @@
|
||||
// If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
|
||||
|
||||
// Ultimaker
|
||||
#define DEFAULT_Kp 22.2
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114
|
||||
#define DEFAULT_Kp 22.2
|
||||
#define DEFAULT_Ki 1.08
|
||||
#define DEFAULT_Kd 114
|
||||
|
||||
// MakerGear
|
||||
//#define DEFAULT_Kp 7.0
|
||||
//#define DEFAULT_Ki 0.1
|
||||
//#define DEFAULT_Kd 12
|
||||
//#define DEFAULT_Kp 7.0
|
||||
//#define DEFAULT_Ki 0.1
|
||||
//#define DEFAULT_Kd 12
|
||||
|
||||
// Mendel Parts V9 on 12V
|
||||
//#define DEFAULT_Kp 63.0
|
||||
//#define DEFAULT_Ki 2.25
|
||||
//#define DEFAULT_Kd 440
|
||||
//#define DEFAULT_Kp 63.0
|
||||
//#define DEFAULT_Ki 2.25
|
||||
//#define DEFAULT_Kd 440
|
||||
|
||||
#endif // PIDTEMP
|
||||
|
||||
//===========================================================================
|
||||
//============================= PID > Bed Temperature Control ===============
|
||||
//===========================================================================
|
||||
|
||||
/**
|
||||
* PID Bed Heating
|
||||
*
|
||||
* If this option is enabled set PID constants below.
|
||||
* If this option is disabled, bang-bang will be used and BED_LIMIT_SWITCHING will enable hysteresis.
|
||||
*
|
||||
* The PID frequency will be the same as the extruder PWM.
|
||||
* If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
|
||||
* which is fine for driving a square wave into a resistive load and does not significantly
|
||||
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W
|
||||
* heater. If your configuration is significantly different than this and you don't understand
|
||||
* the issues involved, don't use bed PID until someone else verifies that your hardware works.
|
||||
*/
|
||||
//#define PIDTEMPBED
|
||||
// Select PID or bang-bang with PIDTEMPBED. If bang-bang, BED_LIMIT_SWITCHING will enable hysteresis
|
||||
//
|
||||
// Uncomment this to enable PID on the bed. It uses the same frequency PWM as the extruder.
|
||||
// If your PID_dT is the default, and correct for your hardware/configuration, that means 7.689Hz,
|
||||
// which is fine for driving a square wave into a resistive load and does not significantly impact you FET heating.
|
||||
// This also works fine on a Fotek SSR-10DA Solid State Relay into a 250W heater.
|
||||
// If your configuration is significantly different than this and you don't understand the issues involved, you probably
|
||||
// shouldn't use bed PID until someone else verifies your hardware works.
|
||||
// If this is enabled, find your own PID constants below.
|
||||
#define PIDTEMPBED
|
||||
|
||||
//#define BED_LIMIT_SWITCHING
|
||||
|
||||
/**
|
||||
* Max Bed Power
|
||||
* Applies to all forms of bed control (PID, bang-bang, and bang-bang with hysteresis).
|
||||
* When set to any value below 255, enables a form of PWM to the bed that acts like a divider
|
||||
* so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
|
||||
*/
|
||||
// This sets the max power delivered to the bed, and replaces the HEATER_BED_DUTY_CYCLE_DIVIDER option.
|
||||
// all forms of bed control obey this (PID, bang-bang, bang-bang with hysteresis)
|
||||
// setting this to anything other than 255 enables a form of PWM to the bed just like HEATER_BED_DUTY_CYCLE_DIVIDER did,
|
||||
// so you shouldn't use it unless you are OK with PWM on your bed. (see the comment on enabling PIDTEMPBED)
|
||||
#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current
|
||||
|
||||
#if ENABLED(PIDTEMPBED)
|
||||
@@ -422,15 +429,15 @@
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from FOPDT model - kp=.39 Tp=405 Tdead=66, Tc set to 79.2, aggressive factor of .15 (vs .1, 1, 10)
|
||||
#define DEFAULT_bedKp 10.00
|
||||
#define DEFAULT_bedKi .023
|
||||
#define DEFAULT_bedKd 305.4
|
||||
#define DEFAULT_bedKp 100.0
|
||||
#define DEFAULT_bedKi 15.0
|
||||
#define DEFAULT_bedKd 200.0
|
||||
|
||||
//120V 250W silicone heater into 4mm borosilicate (MendelMax 1.5+)
|
||||
//from pidautotune
|
||||
//#define DEFAULT_bedKp 97.1
|
||||
//#define DEFAULT_bedKi 1.41
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
//#define DEFAULT_bedKp 97.1
|
||||
//#define DEFAULT_bedKi 1.41
|
||||
//#define DEFAULT_bedKd 1675.16
|
||||
|
||||
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
|
||||
#endif // PIDTEMPBED
|
||||
@@ -494,10 +501,10 @@
|
||||
// Almost all printers will be using one per axis. Probes will use one or more of the
|
||||
// extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
|
||||
#define USE_XMIN_PLUG
|
||||
#define USE_YMIN_PLUG
|
||||
//#define USE_YMIN_PLUG
|
||||
#define USE_ZMIN_PLUG
|
||||
//#define USE_XMAX_PLUG
|
||||
//#define USE_YMAX_PLUG
|
||||
#define USE_YMAX_PLUG
|
||||
//#define USE_ZMAX_PLUG
|
||||
|
||||
// Enable pullup for all endstops to prevent a floating state
|
||||
@@ -514,12 +521,12 @@
|
||||
#endif
|
||||
|
||||
// Mechanical endstop with COM to ground and NC to Signal uses "false" here (most common setup).
|
||||
#define X_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define X_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Y_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define X_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING false // set to true to invert the logic of the endstop.
|
||||
#define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
|
||||
#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
|
||||
|
||||
// Enable this feature if all enabled endstop pins are interrupt-capable.
|
||||
@@ -551,14 +558,17 @@
|
||||
* Override with M92
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 4000, 500 }
|
||||
|
||||
#if(ENABLED(Y_2208))
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 80, 1600, 96 }
|
||||
#else
|
||||
#define DEFAULT_AXIS_STEPS_PER_UNIT { 80, 160, 1600, 96 }
|
||||
#endif
|
||||
/**
|
||||
* Default Max Feed Rate (mm/s)
|
||||
* Override with M203
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_FEEDRATE { 300, 300, 5, 25 }
|
||||
#define DEFAULT_MAX_FEEDRATE { 250, 150, 5, 25 }
|
||||
|
||||
/**
|
||||
* Default Max Acceleration (change/s) change = mm/s
|
||||
@@ -566,7 +576,7 @@
|
||||
* Override with M201
|
||||
* X, Y, Z, E0 [, E1[, E2[, E3[, E4]]]]
|
||||
*/
|
||||
#define DEFAULT_MAX_ACCELERATION { 3000, 3000, 100, 10000 }
|
||||
#define DEFAULT_MAX_ACCELERATION { 1500, 500, 400, 4000 }
|
||||
|
||||
/**
|
||||
* Default Acceleration (change/s) change = mm/s
|
||||
@@ -588,9 +598,9 @@
|
||||
* When changing speed and direction, if the difference is less than the
|
||||
* value set here, it may happen instantaneously.
|
||||
*/
|
||||
#define DEFAULT_XJERK 10.0
|
||||
#define DEFAULT_XJERK 20.0
|
||||
#define DEFAULT_YJERK 10.0
|
||||
#define DEFAULT_ZJERK 0.3
|
||||
#define DEFAULT_ZJERK 0.4
|
||||
#define DEFAULT_EJERK 5.0
|
||||
|
||||
//===========================================================================
|
||||
@@ -653,13 +663,13 @@
|
||||
/**
|
||||
* Z Servo Probe, such as an endstop switch on a rotating arm.
|
||||
*/
|
||||
//#define Z_PROBE_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_ENDSTOP_SERVO_NR 0 // Defaults to SERVO 0 connector.
|
||||
//#define Z_SERVO_ANGLES {70,0} // Z Servo Deploy and Stow angles
|
||||
|
||||
/**
|
||||
* The BLTouch probe uses a Hall effect sensor and emulates a servo.
|
||||
*/
|
||||
//#define BLTOUCH
|
||||
#define BLTOUCH
|
||||
#if ENABLED(BLTOUCH)
|
||||
//#define BLTOUCH_DELAY 375 // (ms) Enable and increase if needed
|
||||
#endif
|
||||
@@ -671,8 +681,8 @@
|
||||
* These options are most useful for the BLTouch probe, but may also improve
|
||||
* readings with inductive probes and piezo sensors.
|
||||
*/
|
||||
//#define PROBING_HEATERS_OFF // Turn heaters off when probing
|
||||
//#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
#define PROBING_HEATERS_OFF // Turn heaters off when probing
|
||||
#define PROBING_FANS_OFF // Turn fans off when probing
|
||||
//#define DELAY_BEFORE_PROBING 200 // (ms) To prevent vibrations from triggering piezo sensors
|
||||
|
||||
// A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
|
||||
@@ -705,13 +715,10 @@
|
||||
* O-- FRONT --+
|
||||
* (0,0)
|
||||
*/
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER 10 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 10 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER 0 // Z offset: -below +above [the nozzle]
|
||||
|
||||
// Certain types of probes need to stay away from edges
|
||||
#define X_PROBE_OFFSET_FROM_EXTRUDER -22 // X offset: -left +right [of the nozzle]
|
||||
#define Y_PROBE_OFFSET_FROM_EXTRUDER 0 // Y offset: -front +behind [the nozzle]
|
||||
#define Z_PROBE_OFFSET_FROM_EXTRUDER -1.5 // Z offset: -below +above [the nozzle]
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// X and Y axis travel speed (mm/m) between probes
|
||||
#define XY_PROBE_SPEED 8000
|
||||
|
||||
@@ -724,7 +731,7 @@
|
||||
// The number of probes to perform at each point.
|
||||
// Set to 2 for a fast/slow probe, using the second probe result.
|
||||
// Set to 3 or more for slow probes, averaging the results.
|
||||
//#define MULTIPLE_PROBING 2
|
||||
#define MULTIPLE_PROBING 2
|
||||
|
||||
/**
|
||||
* Z probes require clearance when deploying, stowing, and moving between
|
||||
@@ -740,12 +747,10 @@
|
||||
* Example: `M851 Z-5` with a CLEARANCE of 4 => 9mm from bed to nozzle.
|
||||
* But: `M851 Z+1` with a CLEARANCE of 2 => 2mm from bed to nozzle.
|
||||
*/
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 10 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_DEPLOY_PROBE 5 // Z Clearance for Deploy/Stow
|
||||
#define Z_CLEARANCE_BETWEEN_PROBES 5 // Z Clearance between probe points
|
||||
//#define Z_AFTER_PROBING 5 // Z position after probing is done
|
||||
|
||||
#define Z_PROBE_LOW_POINT -2 // Farthest distance below the trigger-point to go before stopping
|
||||
|
||||
// For M851 give a range for adjusting the Z probe offset
|
||||
#define Z_PROBE_OFFSET_RANGE_MIN -20
|
||||
#define Z_PROBE_OFFSET_RANGE_MAX 20
|
||||
@@ -776,9 +781,17 @@
|
||||
// @section machine
|
||||
|
||||
// Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
|
||||
#if(ENABLED(X_2208))
|
||||
#define INVERT_X_DIR true
|
||||
#else
|
||||
#define INVERT_X_DIR false
|
||||
#endif
|
||||
#if(ENABLED(Y_2208))
|
||||
#define INVERT_Y_DIR true
|
||||
#define INVERT_Z_DIR false
|
||||
#else
|
||||
#define INVERT_Y_DIR false
|
||||
#endif
|
||||
#define INVERT_Z_DIR true
|
||||
|
||||
// Enable this option for Toshiba stepper drivers
|
||||
//#define CONFIG_STEPPERS_TOSHIBA
|
||||
@@ -786,8 +799,8 @@
|
||||
// @section extruder
|
||||
|
||||
// For direct drive extruder v9 set to true, for geared extruder set to false.
|
||||
#define INVERT_E0_DIR false
|
||||
#define INVERT_E1_DIR false
|
||||
#define INVERT_E0_DIR true
|
||||
#define INVERT_E1_DIR true
|
||||
#define INVERT_E2_DIR false
|
||||
#define INVERT_E3_DIR false
|
||||
#define INVERT_E4_DIR false
|
||||
@@ -798,20 +811,20 @@
|
||||
|
||||
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
|
||||
|
||||
//#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
#define Z_HOMING_HEIGHT 4 // (in mm) Minimal z height before homing (G28) for Z clearance above the bed, clamps, ...
|
||||
// Be sure you have this distance over your Z_MAX_POS in case.
|
||||
|
||||
// Direction of endstops when homing; 1=MAX, -1=MIN
|
||||
// :[-1,1]
|
||||
#define X_HOME_DIR -1
|
||||
#define Y_HOME_DIR -1
|
||||
#define Y_HOME_DIR 1
|
||||
#define Z_HOME_DIR -1
|
||||
|
||||
// @section machine
|
||||
|
||||
// The size of the print bed
|
||||
#define X_BED_SIZE 200
|
||||
#define Y_BED_SIZE 200
|
||||
#define X_BED_SIZE 400
|
||||
#define Y_BED_SIZE 400
|
||||
|
||||
// Travel limits (mm) after homing, corresponding to endstop positions.
|
||||
#define X_MIN_POS 0
|
||||
@@ -819,7 +832,7 @@
|
||||
#define Z_MIN_POS 0
|
||||
#define X_MAX_POS X_BED_SIZE
|
||||
#define Y_MAX_POS Y_BED_SIZE
|
||||
#define Z_MAX_POS 200
|
||||
#define Z_MAX_POS 500
|
||||
|
||||
/**
|
||||
* Software Endstops
|
||||
@@ -846,10 +859,6 @@
|
||||
#define MAX_SOFTWARE_ENDSTOP_Z
|
||||
#endif
|
||||
|
||||
#if ENABLED(MIN_SOFTWARE_ENDSTOPS) || ENABLED(MAX_SOFTWARE_ENDSTOPS)
|
||||
//#define SOFT_ENDSTOPS_MENU_ITEM // Enable/Disable software endstops from the LCD
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Filament Runout Sensors
|
||||
* Mechanical or opto endstops are used to check for the presence of filament.
|
||||
@@ -858,10 +867,13 @@
|
||||
* For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
|
||||
* By default the firmware assumes HIGH=FILAMENT PRESENT.
|
||||
*/
|
||||
//#define FILAMENT_RUNOUT_SENSOR
|
||||
#if(ENABLED(RunoutSensor))
|
||||
#define FILAMENT_RUNOUT_SENSOR
|
||||
#endif
|
||||
#if ENABLED(FILAMENT_RUNOUT_SENSOR)
|
||||
#define NUM_RUNOUT_SENSORS 1 // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
|
||||
#define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
|
||||
#define FIL_RUNOUT_PIN 57
|
||||
#define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor.
|
||||
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
|
||||
#define FILAMENT_RUNOUT_SCRIPT "M600"
|
||||
#endif
|
||||
@@ -906,15 +918,19 @@
|
||||
*/
|
||||
//#define AUTO_BED_LEVELING_3POINT
|
||||
//#define AUTO_BED_LEVELING_LINEAR
|
||||
//#define AUTO_BED_LEVELING_BILINEAR
|
||||
//#define AUTO_BED_LEVELING_UBL
|
||||
#if(ENABLED(UBL))
|
||||
#define AUTO_BED_LEVELING_UBL
|
||||
#else
|
||||
#define AUTO_BED_LEVELING_BILINEAR
|
||||
#endif
|
||||
|
||||
//#define MESH_BED_LEVELING
|
||||
|
||||
/**
|
||||
* Normally G28 leaves leveling disabled on completion. Enable
|
||||
* this option to have G28 restore the prior leveling state.
|
||||
*/
|
||||
//#define RESTORE_LEVELING_AFTER_G28
|
||||
#define RESTORE_LEVELING_AFTER_G28
|
||||
|
||||
/**
|
||||
* Enable detailed logging of G28, G29, M48, etc.
|
||||
@@ -951,14 +967,17 @@
|
||||
#if ENABLED(AUTO_BED_LEVELING_LINEAR) || ENABLED(AUTO_BED_LEVELING_BILINEAR)
|
||||
|
||||
// Set the number of grid points per dimension.
|
||||
#define GRID_MAX_POINTS_X 3
|
||||
#define GRID_MAX_POINTS_X 6
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
// Set the boundaries for probing (where the probe can reach).
|
||||
//#define LEFT_PROBE_BED_POSITION MIN_PROBE_EDGE
|
||||
//#define RIGHT_PROBE_BED_POSITION (X_BED_SIZE - MIN_PROBE_EDGE)
|
||||
//#define FRONT_PROBE_BED_POSITION MIN_PROBE_EDGE
|
||||
//#define BACK_PROBE_BED_POSITION (Y_BED_SIZE - MIN_PROBE_EDGE)
|
||||
#define LEFT_PROBE_BED_POSITION 30
|
||||
#define RIGHT_PROBE_BED_POSITION 365
|
||||
#define FRONT_PROBE_BED_POSITION 30
|
||||
#define BACK_PROBE_BED_POSITION 365
|
||||
|
||||
// The Z probe minimum outer margin (to validate G29 parameters).
|
||||
#define MIN_PROBE_EDGE 10
|
||||
|
||||
// Probe along the Y axis, advancing X after each column
|
||||
//#define PROBE_Y_FIRST
|
||||
@@ -981,6 +1000,17 @@
|
||||
|
||||
#endif
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_3POINT)
|
||||
|
||||
// 3 arbitrary points to probe.
|
||||
// A simple cross-product is used to estimate the plane of the bed.
|
||||
#define ABL_PROBE_PT_1_X 15
|
||||
#define ABL_PROBE_PT_1_Y 180
|
||||
#define ABL_PROBE_PT_2_X 15
|
||||
#define ABL_PROBE_PT_2_Y 20
|
||||
#define ABL_PROBE_PT_3_X 170
|
||||
#define ABL_PROBE_PT_3_Y 20
|
||||
|
||||
#elif ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
|
||||
//===========================================================================
|
||||
@@ -989,10 +1019,17 @@
|
||||
|
||||
//#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
|
||||
|
||||
#define MESH_INSET 1 // Set Mesh bounds as an inset region of the bed
|
||||
#define MESH_INSET 35 // Set Mesh bounds as an inset region of the bed
|
||||
#define GRID_MAX_POINTS_X 10 // Don't use more than 15 points per axis, implementation limited.
|
||||
#define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
|
||||
|
||||
#define UBL_PROBE_PT_1_X 50 // Probing points for 3-Point leveling of the mesh
|
||||
#define UBL_PROBE_PT_1_Y 350
|
||||
#define UBL_PROBE_PT_2_X 50
|
||||
#define UBL_PROBE_PT_2_Y 50
|
||||
#define UBL_PROBE_PT_3_X 350
|
||||
#define UBL_PROBE_PT_3_Y 50
|
||||
|
||||
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
|
||||
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
|
||||
|
||||
@@ -1013,19 +1050,6 @@
|
||||
|
||||
#endif // BED_LEVELING
|
||||
|
||||
/**
|
||||
* Points to probe for all 3-point Leveling procedures.
|
||||
* Override if the automatically selected points are inadequate.
|
||||
*/
|
||||
#if ENABLED(AUTO_BED_LEVELING_3POINT) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
//#define PROBE_PT_1_X 15
|
||||
//#define PROBE_PT_1_Y 180
|
||||
//#define PROBE_PT_2_X 15
|
||||
//#define PROBE_PT_2_Y 20
|
||||
//#define PROBE_PT_3_X 170
|
||||
//#define PROBE_PT_3_Y 20
|
||||
#endif
|
||||
|
||||
/**
|
||||
* Use the LCD controller for bed leveling
|
||||
* Requires MESH_BED_LEVELING or PROBE_MANUALLY
|
||||
@@ -1033,7 +1057,7 @@
|
||||
//#define LCD_BED_LEVELING
|
||||
|
||||
#if ENABLED(LCD_BED_LEVELING)
|
||||
#define MBL_Z_STEP 0.025 // Step size while manually probing Z axis.
|
||||
#define MBL_Z_STEP 0.01 // Step size while manually probing Z axis.
|
||||
#define LCD_PROBE_Z_RANGE 4 // Z Range centered on Z_MIN_POS for LCD Z adjustment
|
||||
#endif
|
||||
|
||||
@@ -1066,12 +1090,11 @@
|
||||
// - If stepper drivers time out, it will need X and Y homing again before Z homing.
|
||||
// - Move the Z probe (or nozzle) to a defined XY point before Z Homing when homing all axes (G28).
|
||||
// - Prevent Z homing when the Z probe is outside bed area.
|
||||
//
|
||||
//#define Z_SAFE_HOMING
|
||||
#define Z_SAFE_HOMING
|
||||
|
||||
#if ENABLED(Z_SAFE_HOMING)
|
||||
#define Z_SAFE_HOMING_X_POINT ((X_BED_SIZE) / 2) // X point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT ((Y_BED_SIZE) / 2) // Y point for Z homing when homing all axes (G28).
|
||||
#define Z_SAFE_HOMING_X_POINT 50 // X point for Z homing when homing all axis (G28).
|
||||
#define Z_SAFE_HOMING_Y_POINT 50 // Y point for Z homing when homing all axis (G28).
|
||||
#endif
|
||||
|
||||
// Homing speeds (mm/m)
|
||||
@@ -1149,7 +1172,7 @@
|
||||
// M501 - reads parameters from EEPROM (if you need reset them after you changed them temporarily).
|
||||
// M502 - reverts to the default "factory settings". You still need to store them in EEPROM afterwards if you want to.
|
||||
//
|
||||
//#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
#define EEPROM_SETTINGS // Enable for M500 and M501 commands
|
||||
//#define DISABLE_M503 // Saves ~2700 bytes of PROGMEM. Disable for release!
|
||||
#define EEPROM_CHITCHAT // Give feedback on EEPROM commands. Disable to save PROGMEM.
|
||||
|
||||
@@ -1181,12 +1204,12 @@
|
||||
// @section temperature
|
||||
|
||||
// Preheat Constants
|
||||
#define PREHEAT_1_TEMP_HOTEND 180
|
||||
#define PREHEAT_1_TEMP_BED 70
|
||||
#define PREHEAT_1_TEMP_HOTEND 200
|
||||
#define PREHEAT_1_TEMP_BED 60
|
||||
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
#define PREHEAT_2_TEMP_HOTEND 240
|
||||
#define PREHEAT_2_TEMP_BED 110
|
||||
#define PREHEAT_2_TEMP_HOTEND 220
|
||||
#define PREHEAT_2_TEMP_BED 100
|
||||
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
|
||||
|
||||
/**
|
||||
@@ -1200,11 +1223,11 @@
|
||||
* P1 Raise the nozzle always to Z-park height.
|
||||
* P2 Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
|
||||
*/
|
||||
//#define NOZZLE_PARK_FEATURE
|
||||
#define NOZZLE_PARK_FEATURE
|
||||
|
||||
#if ENABLED(NOZZLE_PARK_FEATURE)
|
||||
// Specify a park position as { X, Y, Z }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS - 10), 20 }
|
||||
#define NOZZLE_PARK_XY_FEEDRATE 100 // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
|
||||
#define NOZZLE_PARK_Z_FEEDRATE 5 // Z axis feedrate in mm/s (not used for delta printers)
|
||||
#endif
|
||||
@@ -1365,7 +1388,7 @@
|
||||
* you must uncomment the following option or it won't work.
|
||||
*
|
||||
*/
|
||||
//#define SDSUPPORT
|
||||
#define SDSUPPORT
|
||||
|
||||
/**
|
||||
* SD CARD: SPI SPEED
|
||||
@@ -1517,7 +1540,7 @@
|
||||
// RepRapDiscount FULL GRAPHIC Smart Controller
|
||||
// http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
|
||||
//
|
||||
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
|
||||
|
||||
//
|
||||
// MakerLab Mini Panel with graphic
|
||||
|
||||
+71
-70
@@ -75,8 +75,8 @@
|
||||
* THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_HOTENDS)
|
||||
#define THERMAL_PROTECTION_PERIOD 40 // Seconds
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 4 // Degrees Celsius
|
||||
#define THERMAL_PROTECTION_PERIOD 180 // Seconds
|
||||
#define THERMAL_PROTECTION_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
/**
|
||||
* Whenever an M104, M109, or M303 increases the target temperature, the
|
||||
@@ -90,7 +90,7 @@
|
||||
* and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
|
||||
* below 2.
|
||||
*/
|
||||
#define WATCH_TEMP_PERIOD 20 // Seconds
|
||||
#define WATCH_TEMP_PERIOD 180 // Seconds
|
||||
#define WATCH_TEMP_INCREASE 2 // Degrees Celsius
|
||||
#endif
|
||||
|
||||
@@ -98,7 +98,7 @@
|
||||
* Thermal Protection parameters for the bed are just as above for hotends.
|
||||
*/
|
||||
#if ENABLED(THERMAL_PROTECTION_BED)
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 20 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_PERIOD 300 // Seconds
|
||||
#define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
|
||||
|
||||
/**
|
||||
@@ -230,7 +230,6 @@
|
||||
#define E2_AUTO_FAN_PIN -1
|
||||
#define E3_AUTO_FAN_PIN -1
|
||||
#define E4_AUTO_FAN_PIN -1
|
||||
#define CHAMBER_AUTO_FAN_PIN -1
|
||||
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
|
||||
#define EXTRUDER_AUTO_FAN_SPEED 255 // == full speed
|
||||
|
||||
@@ -248,13 +247,13 @@
|
||||
/**
|
||||
* M355 Case Light on-off / brightness
|
||||
*/
|
||||
//#define CASE_LIGHT_ENABLE
|
||||
#define CASE_LIGHT_ENABLE
|
||||
#if ENABLED(CASE_LIGHT_ENABLE)
|
||||
//#define CASE_LIGHT_PIN 4 // Override the default pin if needed
|
||||
#define CASE_LIGHT_PIN 5 // Override the default pin if needed
|
||||
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
|
||||
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 105 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
//#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
|
||||
#define MENU_ITEM_CASE_LIGHT // Add a Case Light option to the LCD main menu
|
||||
//#define CASE_LIGHT_USE_NEOPIXEL // Use Neopixel LED as case light, requires NEOPIXEL_LED.
|
||||
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
|
||||
#define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
|
||||
@@ -491,19 +490,19 @@
|
||||
// @section lcd
|
||||
|
||||
// Include a page of printer information in the LCD Main Menu
|
||||
//#define LCD_INFO_MENU
|
||||
#define LCD_INFO_MENU
|
||||
|
||||
// Leave out seldom-used LCD menu items to recover some Program Memory
|
||||
//#define SLIM_LCD_MENUS
|
||||
|
||||
// Scroll a longer status message into view
|
||||
//#define STATUS_MESSAGE_SCROLLING
|
||||
#define STATUS_MESSAGE_SCROLLING
|
||||
|
||||
// On the Info Screen, display XY with one decimal place when possible
|
||||
//#define LCD_DECIMAL_SMALL_XY
|
||||
|
||||
// The timeout (in ms) to return to the status screen from sub-menus
|
||||
//#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
#define LCD_TIMEOUT_TO_STATUS 15000
|
||||
|
||||
// Add an 'M73' G-code to set the current percentage
|
||||
//#define LCD_SET_PROGRESS_MANUALLY
|
||||
@@ -700,16 +699,16 @@
|
||||
*
|
||||
* Warning: Does not respect endstops!
|
||||
*/
|
||||
//#define BABYSTEPPING
|
||||
#define BABYSTEPPING
|
||||
#if ENABLED(BABYSTEPPING)
|
||||
//#define BABYSTEP_XY // Also enable X/Y Babystepping. Not supported on DELTA!
|
||||
#define BABYSTEP_INVERT_Z false // Change if Z babysteps should go the other way
|
||||
#define BABYSTEP_MULTIPLICATOR 1 // Babysteps are very small. Increase for faster motion.
|
||||
//#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||
//#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define BABYSTEP_ZPROBE_OFFSET // Enable to combine M851 and Babystepping
|
||||
#define DOUBLECLICK_FOR_Z_BABYSTEPPING // Double-click on the Status Screen for Z Babystepping.
|
||||
#define DOUBLECLICK_MAX_INTERVAL 1250 // Maximum interval between clicks, in milliseconds.
|
||||
// Note: Extra time may be added to mitigate controller latency.
|
||||
//#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#define BABYSTEP_ZPROBE_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
|
||||
#endif
|
||||
|
||||
// @section extruder
|
||||
@@ -738,6 +737,12 @@
|
||||
|
||||
// @section leveling
|
||||
|
||||
#if ENABLED(DELTA) && !defined(DELTA_PROBEABLE_RADIUS)
|
||||
#define DELTA_PROBEABLE_RADIUS DELTA_PRINTABLE_RADIUS
|
||||
#elif IS_SCARA && !defined(SCARA_PRINTABLE_RADIUS)
|
||||
#define SCARA_PRINTABLE_RADIUS (SCARA_LINKAGE_1 + SCARA_LINKAGE_2)
|
||||
#endif
|
||||
|
||||
#if ENABLED(MESH_BED_LEVELING) || ENABLED(AUTO_BED_LEVELING_UBL)
|
||||
// Override the mesh area if the automatic (max) area is too large
|
||||
//#define MESH_MIN_X MESH_INSET
|
||||
@@ -837,7 +842,7 @@
|
||||
// enter the serial receive buffer, so they cannot be blocked.
|
||||
// Currently handles M108, M112, M410
|
||||
// Does not work on boards using AT90USB (USBCON) processors!
|
||||
//#define EMERGENCY_PARSER
|
||||
#define EMERGENCY_PARSER
|
||||
|
||||
// Bad Serial-connections can miss a received command by sending an 'ok'
|
||||
// Therefore some clients abort after 30 seconds in a timeout.
|
||||
@@ -846,7 +851,7 @@
|
||||
//#define NO_TIMEOUTS 1000 // Milliseconds
|
||||
|
||||
// Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
|
||||
//#define ADVANCED_OK
|
||||
#define ADVANCED_OK
|
||||
|
||||
// @section extras
|
||||
|
||||
@@ -898,46 +903,40 @@
|
||||
* Requires NOZZLE_PARK_FEATURE.
|
||||
* This feature is required for the default FILAMENT_RUNOUT_SCRIPT.
|
||||
*/
|
||||
//#define ADVANCED_PAUSE_FEATURE
|
||||
#define ADVANCED_PAUSE_FEATURE
|
||||
#if ENABLED(ADVANCED_PAUSE_FEATURE)
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE 6 // (mm/s) Slow move when starting load.
|
||||
#define FILAMENT_CHANGE_SLOW_LOAD_LENGTH 0 // (mm) Slow length, to allow time to insert material.
|
||||
// 0 to disable start loading and skip to fast load only
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_ACCEL 25 // (mm/s^2) Lower acceleration may allow a faster feedrate.
|
||||
#define FILAMENT_CHANGE_FAST_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
//#define ADVANCED_PAUSE_CONTINUOUS_PURGE // Purge continuously up to the purge length until interrupted.
|
||||
#define ADVANCED_PAUSE_PURGE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_PURGE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
#define PAUSE_PARK_RETRACT_FEEDRATE 60 // (mm/s) Initial retract feedrate.
|
||||
#define PAUSE_PARK_RETRACT_LENGTH 2 // (mm) Initial retract.
|
||||
// This short retract is done immediately, before parking the nozzle.
|
||||
#define FILAMENT_CHANGE_UNLOAD_FEEDRATE 10 // (mm/s) Unload filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_UNLOAD_LENGTH 100 // (mm) The length of filament for a complete unload.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
// Set to 0 for manual unloading.
|
||||
#define FILAMENT_CHANGE_LOAD_FEEDRATE 6 // (mm/s) Load filament feedrate. This can be pretty fast.
|
||||
#define FILAMENT_CHANGE_LOAD_LENGTH 0 // (mm) Load length of filament, from extruder gear to nozzle.
|
||||
// For Bowden, the full length of the tube and nozzle.
|
||||
// For direct drive, the full length of the nozzle.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_FEEDRATE 3 // (mm/s) Extrude feedrate (after loading). Should be slower than load feedrate.
|
||||
#define ADVANCED_PAUSE_EXTRUDE_LENGTH 50 // (mm) Length to extrude after loading.
|
||||
// Set to 0 for manual extrusion.
|
||||
// Filament can be extruded repeatedly from the Filament Change menu
|
||||
// until extrusion is consistent, and to purge old filament.
|
||||
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
// Filament Unload does a Retract, Delay, and Purge first:
|
||||
#define FILAMENT_UNLOAD_RETRACT_LENGTH 13 // (mm) Unload initial retract length.
|
||||
#define FILAMENT_UNLOAD_DELAY 5000 // (ms) Delay for the filament to cool after retract.
|
||||
#define FILAMENT_UNLOAD_PURGE_LENGTH 8 // (mm) An unretract is done, then this length is purged.
|
||||
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 10 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
#define PAUSE_PARK_NOZZLE_TIMEOUT 45 // (seconds) Time limit before the nozzle is turned off for safety.
|
||||
#define FILAMENT_CHANGE_ALERT_BEEPS 3 // Number of alert beeps to play when a response is needed.
|
||||
#define PAUSE_PARK_NO_STEPPER_TIMEOUT // Enable for XYZ steppers to stay powered on during filament change.
|
||||
|
||||
//#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
#define PARK_HEAD_ON_PAUSE // Park the nozzle during pause and filament change.
|
||||
//#define HOME_BEFORE_FILAMENT_CHANGE // Ensure homing has been completed prior to parking for filament change
|
||||
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
//#define FILAMENT_LOAD_UNLOAD_GCODES // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
|
||||
//#define FILAMENT_UNLOAD_ALL_EXTRUDERS // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
|
||||
#endif
|
||||
|
||||
// @section tmc
|
||||
@@ -1407,7 +1406,7 @@
|
||||
/**
|
||||
* M43 - display pin status, watch pins for changes, watch endstops & toggle LED, Z servo probe test, toggle pins
|
||||
*/
|
||||
//#define PINS_DEBUGGING
|
||||
#define PINS_DEBUGGING
|
||||
|
||||
/**
|
||||
* Auto-report temperatures with M155 S<seconds>
|
||||
@@ -1461,26 +1460,28 @@
|
||||
/**
|
||||
* User-defined menu items that execute custom GCode
|
||||
*/
|
||||
//#define CUSTOM_USER_MENUS
|
||||
#if(ENABLED(UBL))
|
||||
#define CUSTOM_USER_MENUS
|
||||
#endif
|
||||
#if ENABLED(CUSTOM_USER_MENUS)
|
||||
#define USER_SCRIPT_DONE "M117 User Script Done"
|
||||
//#define USER_SCRIPT_DONE "M117 User Script Done"
|
||||
#define USER_SCRIPT_AUDIBLE_FEEDBACK
|
||||
//#define USER_SCRIPT_RETURN // Return to status screen after a script
|
||||
#define USER_SCRIPT_RETURN // Return to status screen after a script
|
||||
|
||||
#define USER_DESC_1 "Home & UBL Info"
|
||||
#define USER_GCODE_1 "G28\nG29 W"
|
||||
#define USER_DESC_1 "UBL Commission Step 1"
|
||||
#define USER_GCODE_1 "M502 \n M500 \n M501 \n M190 S75 \n M104 S225 \n G28 \n G29 P1 \n G29 S1 \n M117 Run Step 2 \n"
|
||||
|
||||
#define USER_DESC_2 "UBL Commission Step 2"
|
||||
#define USER_GCODE_2 "G29 S1 \n G29 S0 \n G29 F 10.0 \n G29 A \n M500 \n G28 \n G29 L1 \n M109 S225 \n G1 X150 Y 150 \n G1 Z0 \n M117 Set Z Offset \n"
|
||||
|
||||
#define USER_DESC_2 "Preheat for PLA"
|
||||
#define USER_GCODE_2 "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
|
||||
#define USER_DESC_3 "Prep for Z Adjust"
|
||||
#define USER_GCODE_3 "M190 75 \n M104 235 \n G28 \n G29 L1 \n G1 X150 Y 150 \n G1 Z0 \n"
|
||||
|
||||
#define USER_DESC_3 "Preheat for ABS"
|
||||
#define USER_GCODE_3 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
|
||||
#define USER_DESC_4 "Fill Mesh Points"
|
||||
#define USER_GCODE_4 "G29 P3 \n G29 P3 \n G29 P3 \n G29 T \n"
|
||||
|
||||
#define USER_DESC_4 "Heat Bed/Home/Level"
|
||||
#define USER_GCODE_4 "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nG28\nG29"
|
||||
|
||||
#define USER_DESC_5 "Home & Info"
|
||||
#define USER_GCODE_5 "G28\nM503"
|
||||
#define USER_DESC_5 "Run Mesh Validation"
|
||||
#define USER_GCODE_5 "G26 \n"
|
||||
#endif
|
||||
|
||||
/**
|
||||
@@ -1495,8 +1496,8 @@
|
||||
* Will be sent in the form '//action:ACTION_ON_PAUSE', e.g. '//action:pause'.
|
||||
* The host must be configured to handle the action command.
|
||||
*/
|
||||
//#define ACTION_ON_PAUSE "pause"
|
||||
//#define ACTION_ON_RESUME "resume"
|
||||
#define ACTION_ON_PAUSE "pause"
|
||||
#define ACTION_ON_RESUME "resume"
|
||||
|
||||
//===========================================================================
|
||||
//====================== I2C Position Encoder Settings ======================
|
||||
|
||||
+4
-4
@@ -35,7 +35,7 @@
|
||||
/**
|
||||
* Marlin release version identifier
|
||||
*/
|
||||
#define SHORT_BUILD_VERSION "bugfix-1.1.x"
|
||||
#define SHORT_BUILD_VERSION "1.1.8-B2"
|
||||
|
||||
/**
|
||||
* Verbose version identifier which should contain a reference to the location
|
||||
@@ -48,7 +48,7 @@
|
||||
* here we define this default string as the date where the latest release
|
||||
* version was tagged.
|
||||
*/
|
||||
#define STRING_DISTRIBUTION_DATE "2018-01-20"
|
||||
#define STRING_DISTRIBUTION_DATE "2018-03-17"
|
||||
|
||||
/**
|
||||
* Required minimum Configuration.h and Configuration_adv.h file versions.
|
||||
@@ -70,7 +70,7 @@
|
||||
/**
|
||||
* Defines a generic printer name to be output to the LCD after booting Marlin.
|
||||
*/
|
||||
#define MACHINE_NAME "3D Printer"
|
||||
#define MACHINE_NAME "TM3D Raptor"
|
||||
|
||||
/**
|
||||
* The SOURCE_CODE_URL is the location where users will find the Marlin Source
|
||||
@@ -89,6 +89,6 @@
|
||||
* The WEBSITE_URL is the location where users can get more information such as
|
||||
* documentation about a specific Marlin release.
|
||||
*/
|
||||
#define WEBSITE_URL "http://marlinfw.org"
|
||||
#define WEBSITE_URL "http://tinymachines3d.com"
|
||||
|
||||
#endif // USE_AUTOMATIC_VERSIONING
|
||||
|
||||
@@ -0,0 +1,106 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Bitmap for splashscreen
|
||||
*
|
||||
* You may use one of the following tools to generate the C++ bitmap array from
|
||||
* a black and white image:
|
||||
*
|
||||
* - http://www.marlinfw.org/tools/u8glib/converter.html
|
||||
* - http://www.digole.com/tools/PicturetoC_Hex_converter.php
|
||||
*/
|
||||
#include <avr/pgmspace.h>
|
||||
|
||||
#define CUSTOM_BOOTSCREEN_TIMEOUT 2500
|
||||
#define CUSTOM_BOOTSCREEN_BMPWIDTH 128
|
||||
#define CUSTOM_BOOTSCREEN_BMPHEIGHT 64
|
||||
|
||||
const unsigned char custom_start_bmp[] PROGMEM = {
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFD, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFE, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFC, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFE, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFC, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F, 0xFF, 0xFF, 0xFF,
|
||||
0xFE, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F, 0xFF, 0xFF, 0xFF,
|
||||
0xFC, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x07, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFE, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x05, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
|
||||
0xFC, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x06, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
|
||||
0xFE, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x05, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
|
||||
0xFC, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x06, 0x07, 0xC0, 0x00, 0x01, 0xF0, 0x3F,
|
||||
0xFE, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x04, 0x0A, 0x20, 0x00, 0x02, 0x08, 0x1F,
|
||||
0xFC, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x06, 0x14, 0x10, 0x00, 0x05, 0x04, 0x3F,
|
||||
0xFE, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x04, 0x28, 0x08, 0x00, 0x0A, 0x02, 0x1F,
|
||||
0xFC, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x06, 0x54, 0x04, 0x00, 0x15, 0x01, 0x3F,
|
||||
0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
|
||||
0xFC, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2E, 0x50, 0x04, 0x00, 0x14, 0x01, 0x3F,
|
||||
0xFE, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x54, 0x60, 0x04, 0x00, 0x18, 0x01, 0x1F,
|
||||
0xFC, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x66, 0x54, 0x04, 0x1C, 0x15, 0x01, 0x3F,
|
||||
0xFE, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x54, 0x28, 0x08, 0x2A, 0x0A, 0x02, 0x1F,
|
||||
0xFC, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2E, 0x14, 0x10, 0x51, 0x05, 0x04, 0x3F,
|
||||
0xFE, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x0A, 0x20, 0x61, 0x02, 0x88, 0x1F,
|
||||
0xFC, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x06, 0x07, 0xC0, 0x51, 0x01, 0xF0, 0x3F,
|
||||
0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x04, 0x00, 0x00, 0x2A, 0x00, 0x00, 0x1F,
|
||||
0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x1C, 0x00, 0x00, 0x3F,
|
||||
0xFE, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x54, 0x00, 0x00, 0x00, 0x00, 0x00, 0x1F,
|
||||
0xFC, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
|
||||
0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x44, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
|
||||
0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x46, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
|
||||
0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
|
||||
0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x46, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
|
||||
0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x44, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
|
||||
0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x56, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFC, 0xC4, 0x10, 0x41, 0x04, 0x11, 0xBF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x06, 0x84, 0x10, 0x41, 0x04, 0x10, 0x9F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x54, 0xD5, 0x55, 0x55, 0x55, 0x55, 0xBF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFC, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0x9F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFE, 0x00, 0x00, 0x00, 0x00, 0x00, 0x3F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFD, 0x55, 0x55, 0x55, 0x55, 0x55, 0x5F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xE0, 0x2E, 0xFB, 0x7D, 0xFB, 0xFB, 0xCF, 0xC1, 0xDF, 0xBB, 0x3E, 0xC0, 0xE1, 0xFE, 0x3C, 0x1F,
|
||||
0xFD, 0xEE, 0x7B, 0x39, 0xF9, 0xF3, 0xCF, 0x9E, 0xDF, 0xBB, 0x3E, 0xDF, 0xDE, 0xFC, 0xDD, 0xE7,
|
||||
0xFD, 0xEE, 0x3B, 0xBB, 0xF9, 0xEB, 0xD7, 0xBF, 0x5F, 0xBB, 0x5E, 0xDF, 0xDE, 0xFD, 0xED, 0xF7,
|
||||
0xFD, 0xEE, 0xBB, 0xD3, 0xFA, 0xEB, 0xB7, 0x3F, 0xDF, 0xBB, 0x4E, 0xDF, 0xDF, 0xFF, 0xCD, 0xF3,
|
||||
0xFD, 0xEE, 0xDB, 0xC7, 0xFA, 0xEB, 0xBB, 0x7F, 0xC0, 0x3B, 0x6E, 0xC0, 0xE3, 0xFF, 0x1D, 0xF3,
|
||||
0xFD, 0xEE, 0xCB, 0xEF, 0xFA, 0xDB, 0xBB, 0x7F, 0xDF, 0xBB, 0x66, 0xDF, 0xF8, 0xFF, 0xCD, 0xF3,
|
||||
0xFD, 0xEE, 0xEB, 0xEF, 0xFB, 0x5B, 0x03, 0x3F, 0x5F, 0xBB, 0x76, 0xDF, 0xFE, 0x7F, 0xED, 0xF3,
|
||||
0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0x5B, 0x79, 0xBE, 0xDF, 0xBB, 0x7A, 0xDF, 0xDE, 0x7D, 0xED, 0xF7,
|
||||
0xFD, 0xEE, 0xF3, 0xEF, 0xFB, 0xBA, 0xFD, 0x9E, 0xDF, 0xBB, 0x7C, 0xDF, 0xDE, 0xFD, 0xCD, 0xE7,
|
||||
0xFD, 0xEE, 0xFB, 0xEF, 0xFB, 0xBA, 0xFD, 0xC1, 0xDF, 0xBB, 0x7E, 0xC0, 0xE0, 0xFE, 0x1C, 0x1F,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF,
|
||||
0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF, 0xFF
|
||||
};
|
||||
|
||||
|
||||
|
||||
@@ -0,0 +1,460 @@
|
||||
/**
|
||||
* Marlin 3D Printer Firmware
|
||||
* Copyright (C) 2016 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
|
||||
*
|
||||
* Based on Sprinter and grbl.
|
||||
* Copyright (C) 2011 Camiel Gubbels / Erik van der Zalm
|
||||
*
|
||||
* This program is free software: you can redistribute it and/or modify
|
||||
* it under the terms of the GNU General Public License as published by
|
||||
* the Free Software Foundation, either version 3 of the License, or
|
||||
* (at your option) any later version.
|
||||
*
|
||||
* This program is distributed in the hope that it will be useful,
|
||||
* but WITHOUT ANY WARRANTY; without even the implied warranty of
|
||||
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
|
||||
* GNU General Public License for more details.
|
||||
*
|
||||
* You should have received a copy of the GNU General Public License
|
||||
* along with this program. If not, see <http://www.gnu.org/licenses/>.
|
||||
*
|
||||
*/
|
||||
|
||||
/**
|
||||
* Custom Status Screen bitmap
|
||||
*
|
||||
* Place this file in the root with your configuration files
|
||||
* and enable CUSTOM_STATUS_SCREEN_IMAGE in Configuration.h.
|
||||
*
|
||||
* Use the Marlin Bitmap Converter to make your own:
|
||||
* http://marlinfw.org/tools/u8glib/converter.html
|
||||
*/
|
||||
#include "MarlinConfig.h"
|
||||
|
||||
//============================================
|
||||
|
||||
#define STATUS_SCREENWIDTH 128
|
||||
|
||||
#define STATUS_SCREEN_HOTEND_TEXT_X(E) (41 + (E) * 20)
|
||||
|
||||
#define STATUS_SCREEN_BED_TEXT_X (HOTENDS > 1 ? 81 : 73)
|
||||
|
||||
#define FAN_ANIM_FRAMES 3
|
||||
#define STATUS_SCREEN_FAN_TEXT_X (FAN_ANIM_FRAMES == 3 ? 103 : 105)
|
||||
#define STATUS_SCREEN_FAN_TEXT_Y (FAN_ANIM_FRAMES > 2 ? 28 : 27)
|
||||
|
||||
//============================================
|
||||
|
||||
#if HOTENDS < 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B00111001,B11001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11000111,B11101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100111,B00111001,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B00111000,B01101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B01111100,B00101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B11111100,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100111,B11101111,B11001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00100001,B11110001,B11101000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110011,B11110000,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B11110000,B01011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100001,B11111111,B10001000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01101100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00100011,B11111111,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00111111,B11000111,B10001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B11000111,B11001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110111,B10000111,B11011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110111,B00000011,B11011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000010,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10001110,B00000000,B11100001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10011111,B00000000,B11110001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10010011,B10000001,B00111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10011111,B10000001,B11111001,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B10011111,B10111001,B11110001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00100000,B01111111,B11101000,
|
||||
B10001111,B00101000,B11110001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00100000,B01110111,B11101000,
|
||||
B10000000,B00111000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00000100,B00010000,B01000000,B00000000,B00101000,B11101110,B00101000,
|
||||
B10000000,B00000000,B00000001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00101111,B11011100,B00001000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00101111,B11111100,B00001000,
|
||||
B10010001,B01110100,B10011001,B00000000,B00000000,B00011111,B11100000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B10011011,B00000110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00100000,B10000010,B00000000,B00000000,B00101111,B00001111,B00001000,
|
||||
B10011011,B01010100,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00010000,B01000001,B00000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010110,B10101001,B00000000,B00000000,B00111111,B11110000,B00000000,B00000000,B00001000,B00100000,B10000000,B00000000,B00110000,B00001111,B00011000,
|
||||
B10011011,B01010100,B10011001,B00000000,B00000000,B00001111,B11000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B10011111,B11111111,B11111001,B00000000,B00000000,B00000111,B10000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B11111111,B11111111,B11111111,B00000000,B00000000,B00000011,B00000000,B00000000,B00000000,B11111111,B11111111,B11000000,B00000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
|
||||
#endif
|
||||
|
||||
#else // HOTENDS >= 2
|
||||
|
||||
#if FAN_ANIM_FRAMES <= 2
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B11111100,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11111100,B00010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B01111000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B00110000,B00010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00000000,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B01111011,B11010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101110,B00110001,B11010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101100,B00000000,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100000,B11111100,B00010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11110000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110011,B10000111,B00110000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B10000111,B10010000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10000111,B11010000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00000011,B11010000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01111000,B00010000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B00110000,B00010000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B00000011,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B10000111,B11010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00100111,B10000111,B10010000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110011,B10000111,B00110000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000000,B01110000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11110000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000000,B00000000,B00000000
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 3
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000000,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B11110000,B01111011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11111000,B11111101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B11111000,B11111001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00111111,B11100001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00111111,B11100001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B11111000,B11111001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B11111000,B11111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B11110000,B01111011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00100000,B00100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000000,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000110,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00111110,B00000011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00011110,B00000011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00011110,B00001101,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000100,B00000110,B00111101,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000100,B00000111,B00111101,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000101,B11100111,B00000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000101,B11000011,B00000001,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000101,B10000011,B11000001,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00000011,B11000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B00000011,B11100011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000011,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11111111,B11111111,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B11000011,B00011111,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000111,B00000011,B11100111,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B00000011,B11110011,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000110,B10000011,B11100011,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11000011,B11000001,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000101,B11100011,B10000001,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00000101,B11110111,B00000001,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B10000001,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00000111,B11111111,B11111111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00000100,B00001111,B11111111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00000100,B00000111,B01111101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00000100,B00001110,B00111101,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00000100,B00011110,B00011101,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00000110,B00111110,B00001011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00000110,B01111110,B00000011,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00000111,B00111110,B00000111,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00000111,B11000110,B00011111,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00000111,B11111111,B11111111
|
||||
};
|
||||
|
||||
#elif FAN_ANIM_FRAMES == 4
|
||||
|
||||
const unsigned char status_screen0_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00111111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111110,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110000,B01111100,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101000,B01111100,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101100,B00111000,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B00111001,B11001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101111,B11000111,B11101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11111111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100111,B00111001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B00111000,B01101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100000,B01111100,B00101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B01111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B11111100,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11111000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen1_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111000,B00001111,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110100,B00011111,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110110,B00011111,B10011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B00011111,B00001000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00101111,B10011110,B00001000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00101111,B11111100,B00001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100111,B11101111,B11001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100000,B01111111,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00100000,B11110011,B11101000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00100001,B11110001,B11101000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110011,B11110000,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B11110000,B01011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111001,B11100000,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen2_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B10000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B10000000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B10000001,B11011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110111,B11000011,B11011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100111,B11000111,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100011,B11000111,B11111000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100001,B11111111,B10001000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00100000,B01101100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00100011,B11111111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00111111,B11000111,B10001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B11000111,B11001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110111,B10000111,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110111,B00000011,B11011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00000011,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000010,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
const unsigned char status_screen3_bmp[] PROGMEM = {
|
||||
B00111101,B11110000,B00000010,B00111000,B11110000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111111,B11111111,B11111000,
|
||||
B01000100,B10001000,B00000110,B01000101,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111110,B00000000,B11111000,
|
||||
B10000000,B10001000,B00000010,B01000101,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00111001,B11110000,B00111000,
|
||||
B10000000,B11110000,B00000010,B01000100,B10000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10100011,B11110010,B01000100,B01100000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00110001,B11100000,B00011000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100001,B11100001,B11101000,
|
||||
B10000000,B10010000,B00000010,B01000100,B00010000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00000000,B00100000,B11110011,B11101000,
|
||||
B01000100,B10001000,B00000010,B01000101,B00010000,B00011111,B11100000,B00000001,B11111110,B00000000,B00001000,B00100000,B10000000,B00100000,B01111111,B11101000,
|
||||
B00111001,B11001100,B00000111,B00111001,B11100000,B00111110,B11110000,B00000011,B11001111,B00000000,B00000100,B00010000,B01000000,B00100000,B01110111,B11101000,
|
||||
B00000000,B00000000,B00000000,B00000000,B00000000,B00111100,B11110000,B00000011,B10110111,B00000000,B00000100,B00010000,B01000000,B00101000,B11101110,B00101000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00111010,B11110000,B00000011,B11110111,B00000000,B00001000,B00100000,B10000000,B00101111,B11011100,B00001000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11101110,B00000000,B00010000,B01000001,B00000000,B00101111,B11111100,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00011110,B11100000,B00000001,B11011110,B00000000,B00100000,B10000010,B00000000,B00101111,B10011110,B00001000,
|
||||
B00000000,B00011000,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10111111,B00000000,B00100000,B10000010,B00000000,B00101111,B00001111,B00001000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111110,B11110000,B00000011,B10000111,B00000000,B00010000,B01000001,B00000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00111111,B11110000,B00000011,B11111111,B00000000,B00001000,B00100000,B10000000,B00110000,B00001111,B00011000,
|
||||
B00000000,B00000100,B10001001,B00010000,B00000000,B00001111,B11000000,B00000000,B11111100,B00000000,B00000000,B00000000,B00000000,B00111000,B00011111,B00111000,
|
||||
B00000000,B01000100,B10001001,B00010000,B00000000,B00000111,B10000000,B00000000,B01111000,B00000000,B11111111,B11111111,B11000000,B00111110,B00000000,B11111000,
|
||||
B00000000,B00111000,B01110000,B11100000,B00000000,B00000011,B00000000,B00000000,B00110000,B00000000,B11111111,B11111111,B11000000,B00111111,B11111111,B11111000
|
||||
};
|
||||
|
||||
#endif
|
||||
|
||||
#endif // HOTENDS >= 2
|
||||
+240
-82
@@ -28,27 +28,39 @@
|
||||
#error "Oops! Make sure you have 'Arduino Mega' selected from the 'Tools -> Boards' menu."
|
||||
#endif
|
||||
|
||||
#if HOTENDS > 3 || E_STEPPERS > 3
|
||||
#error "RUMBA supports up to 3 hotends / E-steppers. Comment out this line to continue."
|
||||
#if E_STEPPERS > 3 || HOTENDS > 3
|
||||
#error "RUMBA supports up to 3 hotends / E-steppers. Comment this line to keep going."
|
||||
#endif
|
||||
|
||||
#define DEFAULT_MACHINE_NAME "Rumba"
|
||||
#define BOARD_NAME "Rumba"
|
||||
//#endif
|
||||
|
||||
#define LARGE_FLASH true
|
||||
|
||||
//
|
||||
// Servos
|
||||
//
|
||||
#define SERVO0_PIN 5
|
||||
#ifdef IS_RAMPS_13
|
||||
#define SERVO0_PIN 7 // RAMPS_13 // Will conflict with BTN_EN2 on LCD_I2C_VIKI
|
||||
#else
|
||||
#define SERVO0_PIN 11
|
||||
#endif
|
||||
#define SERVO1_PIN 6
|
||||
#define SERVO2_PIN 5
|
||||
#define SERVO3_PIN -1
|
||||
|
||||
//
|
||||
// Limit Switches
|
||||
//
|
||||
#define X_MIN_PIN 37
|
||||
#define X_MAX_PIN 36
|
||||
#define Y_MIN_PIN 35
|
||||
#define Y_MAX_PIN 34
|
||||
#define Z_MIN_PIN 33
|
||||
#define Z_MAX_PIN 32
|
||||
#define X_MIN_PIN 3
|
||||
#ifndef X_MAX_PIN
|
||||
#define X_MAX_PIN 2
|
||||
#endif
|
||||
#define Y_MIN_PIN 14
|
||||
#define Y_MAX_PIN 15
|
||||
#define Z_MIN_PIN 18
|
||||
#define Z_MAX_PIN 19
|
||||
|
||||
//
|
||||
// Z Probe (when not Z_MIN_PIN)
|
||||
@@ -57,109 +69,255 @@
|
||||
#define Z_MIN_PROBE_PIN 32
|
||||
#endif
|
||||
|
||||
#define SLED_PIN -1
|
||||
|
||||
//
|
||||
// Steppers
|
||||
//
|
||||
#define X_STEP_PIN 17
|
||||
#define X_DIR_PIN 16
|
||||
#define X_ENABLE_PIN 48
|
||||
#define X_STEP_PIN 54
|
||||
#define X_DIR_PIN 55
|
||||
#define X_ENABLE_PIN 38
|
||||
#define X_CS_PIN 53
|
||||
|
||||
#define Y_STEP_PIN 60
|
||||
#define Y_DIR_PIN 61
|
||||
#define Y_ENABLE_PIN 56
|
||||
#define Y_CS_PIN 49
|
||||
|
||||
#define Y_STEP_PIN 54
|
||||
#define Y_DIR_PIN 47
|
||||
#define Y_ENABLE_PIN 55
|
||||
|
||||
#define Z_STEP_PIN 57
|
||||
#define Z_DIR_PIN 56
|
||||
#define Z_STEP_PIN 46
|
||||
#define Z_DIR_PIN 48
|
||||
#define Z_ENABLE_PIN 62
|
||||
#define Z_CS_PIN 40
|
||||
|
||||
#define E0_STEP_PIN 23
|
||||
#define E0_DIR_PIN 22
|
||||
#define E0_STEP_PIN 26
|
||||
#define E0_DIR_PIN 28
|
||||
#define E0_ENABLE_PIN 24
|
||||
#define E0_CS_PIN 42
|
||||
|
||||
#define E1_STEP_PIN 26
|
||||
#define E1_DIR_PIN 25
|
||||
#define E1_ENABLE_PIN 27
|
||||
#define E1_STEP_PIN 36
|
||||
#define E1_DIR_PIN 34
|
||||
#define E1_ENABLE_PIN 30
|
||||
#define E1_CS_PIN 44
|
||||
|
||||
#define E2_STEP_PIN 29
|
||||
#define E2_DIR_PIN 28
|
||||
#define E2_ENABLE_PIN 39
|
||||
#define E2_STEP_PIN 42
|
||||
#define E2_DIR_PIN 43
|
||||
#define E2_ENABLE_PIN 44
|
||||
|
||||
//
|
||||
// Temperature Sensors
|
||||
//
|
||||
#if TEMP_SENSOR_0 == -1
|
||||
#define TEMP_0_PIN 6 // Analog Input (connector *K1* on RUMBA thermocouple ADD ON is used)
|
||||
#define TEMP_0_PIN 13 // Analog Input
|
||||
#define TEMP_1_PIN 15 // Analog Input
|
||||
#define TEMP_BED_PIN 14 // Analog Input
|
||||
|
||||
// SPI for Max6675 or Max31855 Thermocouple
|
||||
#if DISABLED(SDSUPPORT)
|
||||
#define MAX6675_SS 66 // Do not use pin 53 if there is even the remote possibility of using Display/SD card
|
||||
#else
|
||||
#define TEMP_0_PIN 15 // Analog Input (default connector for thermistor *T0* on rumba board is used)
|
||||
#define MAX6675_SS 66 // Do not use pin 49 as this is tied to the switch inside the SD card socket to detect if there is an SD card present
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_1 == -1
|
||||
#define TEMP_1_PIN 5 // Analog Input (connector *K2* on RUMBA thermocouple ADD ON is used)
|
||||
#else
|
||||
#define TEMP_1_PIN 14 // Analog Input (default connector for thermistor *T1* on rumba board is used)
|
||||
#endif
|
||||
|
||||
#if TEMP_SENSOR_2 == -1
|
||||
#define TEMP_2_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_BED is defined as thermocouple)
|
||||
#else
|
||||
#define TEMP_2_PIN 13 // Analog Input (default connector for thermistor *T2* on rumba board is used)
|
||||
#endif
|
||||
|
||||
// optional for extruder 4 or chamber:
|
||||
//#define TEMP_X_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
||||
//#define TEMP_CHAMBER_PIN 12 // Analog Input (default connector for thermistor *T3* on rumba board is used)
|
||||
|
||||
#if TEMP_SENSOR_BED == -1
|
||||
#define TEMP_BED_PIN 7 // Analog Input (connector *K3* on RUMBA thermocouple ADD ON is used <-- this can't be used when TEMP_SENSOR_2 is defined as thermocouple)
|
||||
#else
|
||||
#define TEMP_BED_PIN 11 // Analog Input (default connector for thermistor *THB* on rumba board is used)
|
||||
//
|
||||
// Augmentation for auto-assigning RAMPS plugs
|
||||
//
|
||||
#if DISABLED(IS_RAMPS_EEB) && DISABLED(IS_RAMPS_EEF) && DISABLED(IS_RAMPS_EFB) && DISABLED(IS_RAMPS_EFF) && DISABLED(IS_RAMPS_SF) && !PIN_EXISTS(MOSFET_D)
|
||||
#if HOTENDS > 1
|
||||
#if TEMP_SENSOR_BED
|
||||
#define IS_RAMPS_EEB
|
||||
#else
|
||||
#define IS_RAMPS_EEF
|
||||
#endif
|
||||
#elif TEMP_SENSOR_BED
|
||||
#define IS_RAMPS_EFB
|
||||
#else
|
||||
#define IS_RAMPS_EFF
|
||||
#endif
|
||||
#endif
|
||||
|
||||
//
|
||||
// Heaters / Fans
|
||||
//
|
||||
#define HEATER_0_PIN 2
|
||||
#define HEATER_1_PIN 3
|
||||
#define HEATER_2_PIN 6
|
||||
#define HEATER_3_PIN 8
|
||||
#define HEATER_BED_PIN 9
|
||||
#define HEATER_0_PIN 10
|
||||
#define HEATER_1_PIN 58
|
||||
//#define HEATER_2_PIN 6
|
||||
//#define HEATER_3_PIN 8
|
||||
#define HEATER_BED_PIN 8
|
||||
|
||||
#define FAN_PIN 7
|
||||
#define FAN1_PIN 8
|
||||
#define LED4_PIN 5
|
||||
#define LASER_PIN -1
|
||||
|
||||
#define FAN_PIN 9
|
||||
#define FAN1_PIN -1
|
||||
|
||||
//
|
||||
// Misc. Functions
|
||||
//
|
||||
#define SDSS 53
|
||||
#define LED_PIN 13
|
||||
#define PS_ON_PIN 45
|
||||
#define KILL_PIN 46
|
||||
#define CASE_LIGHT_PIN 45
|
||||
|
||||
// Use the RAMPS 1.4 Analog input 5 on the AUX2 connector
|
||||
#define FILWIDTH_PIN 5 // Analog Input
|
||||
|
||||
// define digital pin 4 for the filament runout sensor. Use the RAMPS 1.4 digital input 4 on the servos connector
|
||||
//#define FIL_RUNOUT_PIN 4
|
||||
|
||||
#define PS_ON_PIN 12
|
||||
|
||||
//
|
||||
// LCD / Controller
|
||||
//
|
||||
#define SD_DETECT_PIN 49
|
||||
#define BEEPER_PIN 44
|
||||
#define LCD_PINS_RS 19
|
||||
#define LCD_PINS_ENABLE 42
|
||||
#define LCD_PINS_D4 18
|
||||
#define LCD_PINS_D5 38
|
||||
#define LCD_PINS_D6 41
|
||||
#define LCD_PINS_D7 40
|
||||
#define BTN_EN1 11
|
||||
#define BTN_EN2 12
|
||||
#define BTN_ENC 43
|
||||
#if ENABLED(ULTRA_LCD)
|
||||
|
||||
#if ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
#define LCD_PINS_RS 49 // CS chip select /SS chip slave select
|
||||
#define LCD_PINS_ENABLE 51 // SID (MOSI)
|
||||
#define LCD_PINS_D4 52 // SCK (CLK) clock
|
||||
#elif ENABLED(NEWPANEL) && ENABLED(PANEL_ONE)
|
||||
#define LCD_PINS_RS 40
|
||||
#define LCD_PINS_ENABLE 42
|
||||
#define LCD_PINS_D4 65
|
||||
#define LCD_PINS_D5 66
|
||||
#define LCD_PINS_D6 44
|
||||
#define LCD_PINS_D7 64
|
||||
#else
|
||||
#define LCD_PINS_RS 16
|
||||
#define LCD_PINS_ENABLE 17
|
||||
#define LCD_PINS_D4 23
|
||||
#define LCD_PINS_D5 25
|
||||
#define LCD_PINS_D6 27
|
||||
#define LCD_PINS_D7 29
|
||||
#if DISABLED(NEWPANEL)
|
||||
#define BEEPER_PIN 33
|
||||
// Buttons are attached to a shift register
|
||||
// Not wired yet
|
||||
//#define SHIFT_CLK 38
|
||||
//#define SHIFT_LD 42
|
||||
//#define SHIFT_OUT 40
|
||||
//#define SHIFT_EN 17
|
||||
#endif
|
||||
#endif
|
||||
|
||||
#if ENABLED(NEWPANEL)
|
||||
|
||||
#if ENABLED(REPRAP_DISCOUNT_SMART_CONTROLLER)
|
||||
#define BEEPER_PIN 37
|
||||
|
||||
#define BTN_EN1 31
|
||||
#define BTN_EN2 33
|
||||
#define BTN_ENC 35
|
||||
|
||||
#define SD_DETECT_PIN 49
|
||||
#define KILL_PIN 41
|
||||
|
||||
#if ENABLED(BQ_LCD_SMART_CONTROLLER)
|
||||
#define LCD_BACKLIGHT_PIN 39
|
||||
#endif
|
||||
|
||||
#elif ENABLED(REPRAPWORLD_GRAPHICAL_LCD)
|
||||
#define BTN_EN1 64
|
||||
#define BTN_EN2 59
|
||||
#define BTN_ENC 63
|
||||
#define SD_DETECT_PIN 42
|
||||
#elif ENABLED(LCD_I2C_PANELOLU2)
|
||||
#define BTN_EN1 47 // reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 43
|
||||
#define BTN_ENC 32
|
||||
#define LCD_SDSS 53
|
||||
#define SD_DETECT_PIN -1
|
||||
#define KILL_PIN 41
|
||||
#elif ENABLED(LCD_I2C_VIKI)
|
||||
#define BTN_EN1 22 // reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 7 // http://files.panucatt.com/datasheets/viki_wiring_diagram.pdf
|
||||
// tells about 40/42.
|
||||
// 22/7 are unused on RAMPS_14. 22 is unused and 7 the SERVO0_PIN on RAMPS_13.
|
||||
#define BTN_ENC -1
|
||||
#define LCD_SDSS 53
|
||||
#define SD_DETECT_PIN 49
|
||||
#elif ENABLED(VIKI2) || ENABLED(miniVIKI)
|
||||
#define BEEPER_PIN 33
|
||||
|
||||
// Pins for DOGM SPI LCD Support
|
||||
#define DOGLCD_A0 44
|
||||
#define DOGLCD_CS 45
|
||||
#define LCD_SCREEN_ROT_180
|
||||
|
||||
#define BTN_EN1 22
|
||||
#define BTN_EN2 7
|
||||
#define BTN_ENC 39
|
||||
|
||||
#define SDSS 53
|
||||
#define SD_DETECT_PIN -1 // Pin 49 for display sd interface, 72 for easy adapter board
|
||||
|
||||
#define KILL_PIN 31
|
||||
|
||||
#define STAT_LED_RED_PIN 32
|
||||
#define STAT_LED_BLUE_PIN 35
|
||||
|
||||
#elif ENABLED(ELB_FULL_GRAPHIC_CONTROLLER)
|
||||
#define BTN_EN1 35 // reverse if the encoder turns the wrong way.
|
||||
#define BTN_EN2 37
|
||||
#define BTN_ENC 31
|
||||
#define SD_DETECT_PIN 49
|
||||
#define LCD_SDSS 53
|
||||
#define KILL_PIN 41
|
||||
#define BEEPER_PIN 23
|
||||
#define DOGLCD_CS 29
|
||||
#define DOGLCD_A0 27
|
||||
#define LCD_BACKLIGHT_PIN 33
|
||||
#elif ENABLED(MINIPANEL)
|
||||
#define BEEPER_PIN 42
|
||||
// Pins for DOGM SPI LCD Support
|
||||
#define DOGLCD_A0 44
|
||||
#define DOGLCD_CS 66
|
||||
#define LCD_BACKLIGHT_PIN 65 // backlight LED on A11/D65
|
||||
#define SDSS 53
|
||||
|
||||
#define KILL_PIN 64
|
||||
// GLCD features
|
||||
//#define LCD_CONTRAST 190
|
||||
// Uncomment screen orientation
|
||||
//#define LCD_SCREEN_ROT_90
|
||||
//#define LCD_SCREEN_ROT_180
|
||||
//#define LCD_SCREEN_ROT_270
|
||||
// The encoder and click button
|
||||
#define BTN_EN1 40
|
||||
#define BTN_EN2 63
|
||||
#define BTN_ENC 59
|
||||
// not connected to a pin
|
||||
#define SD_DETECT_PIN 49
|
||||
|
||||
#else
|
||||
|
||||
// Beeper on AUX-4
|
||||
#define BEEPER_PIN 33
|
||||
|
||||
// buttons are directly attached using AUX-2
|
||||
#if ENABLED(REPRAPWORLD_KEYPAD)
|
||||
#define BTN_EN1 64 // encoder
|
||||
#define BTN_EN2 59 // encoder
|
||||
#define BTN_ENC 63 // enter button
|
||||
#define SHIFT_OUT 40 // shift register
|
||||
#define SHIFT_CLK 44 // shift register
|
||||
#define SHIFT_LD 42 // shift register
|
||||
#elif ENABLED(PANEL_ONE)
|
||||
#define BTN_EN1 59 // AUX2 PIN 3
|
||||
#define BTN_EN2 63 // AUX2 PIN 4
|
||||
#define BTN_ENC 49 // AUX3 PIN 7
|
||||
#else
|
||||
#define BTN_EN1 37
|
||||
#define BTN_EN2 35
|
||||
#define BTN_ENC 31 // the click
|
||||
#endif
|
||||
|
||||
#if ENABLED(G3D_PANEL)
|
||||
#define SD_DETECT_PIN 49
|
||||
#define KILL_PIN 41
|
||||
#else
|
||||
//#define SD_DETECT_PIN -1 // Ramps doesn't use this
|
||||
#endif
|
||||
|
||||
#endif
|
||||
#endif // NEWPANEL
|
||||
|
||||
#endif // ULTRA_LCD
|
||||
|
||||
//
|
||||
// M3/M4/M5 - Spindle/Laser Control
|
||||
//
|
||||
#ifndef SPINDLE_LASER_PWM_PIN
|
||||
#define SPINDLE_LASER_PWM_PIN 4 // MUST BE HARDWARE PWM. Pin 4 interrupts OC0* and OC1* always in use?
|
||||
#endif
|
||||
#ifndef SPINDLE_LASER_ENABLE_PIN
|
||||
#define SPINDLE_LASER_ENABLE_PIN 14 // Pin should have a pullup!
|
||||
#endif
|
||||
#ifndef SPINDLE_DIR_PIN
|
||||
#define SPINDLE_DIR_PIN 15
|
||||
#endif
|
||||
|
||||
+74
-81
@@ -216,6 +216,14 @@ uint16_t max_display_update_time = 0;
|
||||
#else
|
||||
void lcd_temp_menu_e0_filament_change();
|
||||
#endif
|
||||
void lcd_advanced_pause_option_menu();
|
||||
void lcd_advanced_pause_init_message();
|
||||
void lcd_advanced_pause_unload_message();
|
||||
void lcd_advanced_pause_insert_message();
|
||||
void lcd_advanced_pause_load_message();
|
||||
void lcd_advanced_pause_heat_nozzle();
|
||||
void lcd_advanced_pause_purge_message();
|
||||
void lcd_advanced_pause_resume_message();
|
||||
#endif
|
||||
|
||||
#if ENABLED(DAC_STEPPER_CURRENT)
|
||||
@@ -829,10 +837,20 @@ void kill_screen(const char* lcd_msg) {
|
||||
lcd_reset_status();
|
||||
}
|
||||
|
||||
bool abort_sd_printing; // =false
|
||||
|
||||
void lcd_sdcard_stop() {
|
||||
abort_sd_printing = true;
|
||||
card.stopSDPrint(
|
||||
#if SD_RESORT
|
||||
true
|
||||
#endif
|
||||
);
|
||||
clear_command_queue();
|
||||
quickstop_stepper();
|
||||
print_job_timer.stop();
|
||||
thermalManager.disable_all_heaters();
|
||||
#if FAN_COUNT > 0
|
||||
for (uint8_t i = 0; i < FAN_COUNT; i++) fanSpeeds[i] = 0;
|
||||
#endif
|
||||
wait_for_heatup = false;
|
||||
lcd_setstatusPGM(PSTR(MSG_PRINT_ABORTED), -1);
|
||||
lcd_return_to_status();
|
||||
}
|
||||
@@ -841,7 +859,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
#if ENABLED(MENU_ITEM_CASE_LIGHT)
|
||||
|
||||
extern uint8_t case_light_brightness;
|
||||
//extern uint8_t case_light_brightness;
|
||||
extern bool case_light_on;
|
||||
extern void update_case_light();
|
||||
|
||||
@@ -851,7 +869,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
// ^ Main
|
||||
//
|
||||
MENU_BACK(MSG_MAIN);
|
||||
MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
|
||||
//MENU_ITEM_EDIT_CALLBACK(int8, MSG_CASE_LIGHT_BRIGHTNESS, &case_light_brightness, 0, 255, update_case_light, true);
|
||||
MENU_ITEM_EDIT_CALLBACK(bool, MSG_CASE_LIGHT, (bool*)&case_light_on, update_case_light);
|
||||
END_MENU();
|
||||
}
|
||||
@@ -870,10 +888,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
// ^ Main
|
||||
//
|
||||
MENU_BACK(MSG_MAIN);
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_DEPLOY, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_DEPLOY)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_STOW, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_STOW)));
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
@@ -1317,7 +1335,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM_EDIT(float43, MSG_BED_Z, &mbl.z_offset, -1, 1);
|
||||
#endif
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
||||
#endif
|
||||
//
|
||||
// Nozzle:
|
||||
@@ -1846,10 +1864,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
//
|
||||
lcd_wait_for_move = true;
|
||||
lcd_goto_screen(_lcd_level_bed_done);
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
enqueue_and_echo_commands_P(PSTR("G29 S2"));
|
||||
#elif ENABLED(PROBE_MANUALLY)
|
||||
#if ENABLED(PROBE_MANUALLY)
|
||||
enqueue_and_echo_commands_P(PSTR("G29 V1"));
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
enqueue_and_echo_commands_P(PSTR("G29 S2"));
|
||||
#endif
|
||||
}
|
||||
else
|
||||
@@ -1862,6 +1880,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
// Encoder knob or keypad buttons adjust the Z position
|
||||
//
|
||||
if (encoderPosition) {
|
||||
refresh_cmd_timeout();
|
||||
const float z = current_position[Z_AXIS] + float((int32_t)encoderPosition) * (MBL_Z_STEP);
|
||||
line_to_z(constrain(z, -(LCD_PROBE_Z_RANGE) * 0.5, (LCD_PROBE_Z_RANGE) * 0.5));
|
||||
lcdDrawUpdate = LCDVIEW_CALL_REDRAW_NEXT;
|
||||
@@ -1898,10 +1917,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
// G29 Records Z, moves, and signals when it pauses
|
||||
lcd_wait_for_move = true;
|
||||
#if ENABLED(MESH_BED_LEVELING)
|
||||
enqueue_and_echo_commands_P(manual_probe_index ? PSTR("G29 S2") : PSTR("G29 S1"));
|
||||
#elif ENABLED(PROBE_MANUALLY)
|
||||
#if ENABLED(PROBE_MANUALLY)
|
||||
enqueue_and_echo_commands_P(PSTR("G29 V1"));
|
||||
#elif ENABLED(MESH_BED_LEVELING)
|
||||
enqueue_and_echo_commands_P(manual_probe_index ? PSTR("G29 S2") : PSTR("G29 S1"));
|
||||
#endif
|
||||
}
|
||||
|
||||
@@ -2384,6 +2403,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
stepper.cleaning_buffer_counter = 0;
|
||||
set_current_from_steppers_for_axis(ALL_AXES);
|
||||
sync_plan_position();
|
||||
refresh_cmd_timeout();
|
||||
}
|
||||
|
||||
void _lcd_ubl_output_map_lcd() {
|
||||
@@ -2398,7 +2418,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
if (encoderPosition) {
|
||||
step_scaler += (int32_t)encoderPosition;
|
||||
x_plot += step_scaler / (ENCODER_STEPS_PER_MENU_ITEM);
|
||||
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM) step_scaler = 0;
|
||||
if (abs(step_scaler) >= ENCODER_STEPS_PER_MENU_ITEM)
|
||||
step_scaler = 0;
|
||||
refresh_cmd_timeout();
|
||||
|
||||
encoderPosition = 0;
|
||||
lcdDrawUpdate = LCDVIEW_REDRAW_NOW;
|
||||
}
|
||||
@@ -2535,7 +2558,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
MENU_ITEM(submenu, MSG_UBL_TOOLS, _lcd_ubl_tools_menu);
|
||||
MENU_ITEM(gcode, MSG_UBL_INFO_UBL, PSTR("G29 W"));
|
||||
#if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float62, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
||||
MENU_MULTIPLIER_ITEM_EDIT_CALLBACK(float3, MSG_Z_FADE_HEIGHT, &new_z_fade_height, 0.0, 100.0, _lcd_set_z_fade_height);
|
||||
#endif
|
||||
END_MENU();
|
||||
}
|
||||
@@ -2662,9 +2685,9 @@ void kill_screen(const char* lcd_msg) {
|
||||
// BLTouch Self-Test and Reset
|
||||
//
|
||||
#if ENABLED(BLTOUCH)
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_SELFTEST, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_SELFTEST)));
|
||||
if (!endstops.z_probe_enabled && TEST_BLTOUCH())
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_PROBE_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
||||
MENU_ITEM(gcode, MSG_BLTOUCH_RESET, PSTR("M280 P" STRINGIFY(Z_ENDSTOP_SERVO_NR) " S" STRINGIFY(BLTOUCH_RESET)));
|
||||
#endif
|
||||
|
||||
//
|
||||
@@ -2696,22 +2719,29 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
float move_menu_scale;
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU) || (ENABLED(DELTA_AUTO_CALIBRATION) && !HAS_BED_PROBE)
|
||||
|
||||
void lcd_move_z();
|
||||
|
||||
void _man_probe_pt(const float &rx, const float &ry) {
|
||||
do_blocking_move_to_z(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
do_blocking_move_to_xy(rx, ry);
|
||||
#if HAS_LEVELING
|
||||
reset_bed_level(); // After calibration bed-level data is no longer valid
|
||||
#endif
|
||||
|
||||
line_to_z((Z_CLEARANCE_BETWEEN_PROBES) + (DELTA_PRINTABLE_RADIUS) / 5);
|
||||
current_position[X_AXIS] = rx;
|
||||
current_position[Y_AXIS] = ry;
|
||||
line_to_current_z();
|
||||
line_to_z(Z_CLEARANCE_BETWEEN_PROBES);
|
||||
|
||||
lcd_synchronize();
|
||||
move_menu_scale = max(PROBE_MANUALLY_STEP, MIN_STEPS_PER_SEGMENT / float(DEFAULT_XYZ_STEPS_PER_UNIT));
|
||||
move_menu_scale = PROBE_MANUALLY_STEP;
|
||||
lcd_goto_screen(lcd_move_z);
|
||||
}
|
||||
|
||||
#endif // DELTA_CALIBRATION_MENU || DELTA_AUTO_CALIBRATION
|
||||
#endif // DELTA_CALIBRATION_MENU || (DELTA_AUTO_CALIBRATION && !HAS_BED_PROBE)
|
||||
|
||||
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
#if ENABLED(DELTA_AUTO_CALIBRATION) && !HAS_BED_PROBE
|
||||
|
||||
float lcd_probe_pt(const float &rx, const float &ry) {
|
||||
_man_probe_pt(rx, ry);
|
||||
@@ -2724,7 +2754,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
return current_position[Z_AXIS];
|
||||
}
|
||||
|
||||
#endif // DELTA_AUTO_CALIBRATION
|
||||
#endif // DELTA_AUTO_CALIBRATION && !HAS_BED_PROBE
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU)
|
||||
|
||||
@@ -2736,6 +2766,10 @@ void kill_screen(const char* lcd_msg) {
|
||||
}
|
||||
|
||||
void _lcd_delta_calibrate_home() {
|
||||
#if HAS_LEVELING
|
||||
reset_bed_level(); // After calibration bed-level data is no longer valid
|
||||
#endif
|
||||
|
||||
enqueue_and_echo_commands_P(PSTR("G28"));
|
||||
lcd_goto_screen(_lcd_calibrate_homing);
|
||||
}
|
||||
@@ -2749,25 +2783,18 @@ void kill_screen(const char* lcd_msg) {
|
||||
|
||||
#if ENABLED(DELTA_CALIBRATION_MENU) || ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
|
||||
void _recalc_delta_settings() {
|
||||
#if HAS_LEVELING
|
||||
reset_bed_level(); // After changing kinematics bed-level data is no longer valid
|
||||
#endif
|
||||
recalc_delta_settings();
|
||||
}
|
||||
|
||||
void lcd_delta_settings() {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_DELTA_CALIBRATE);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5.0, delta_radius + 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, _recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_DIAG_ROD, &delta_diagonal_rod, delta_diagonal_rod - 5.0, delta_diagonal_rod + 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_HEIGHT, &delta_height, delta_height - 10.0, delta_height + 10.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ex", &delta_endstop_adj[A_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ey", &delta_endstop_adj[B_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ez", &delta_endstop_adj[C_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float52, MSG_DELTA_RADIUS, &delta_radius, delta_radius - 5.0, delta_radius + 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Tx", &delta_tower_angle_trim[A_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Ty", &delta_tower_angle_trim[B_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
MENU_ITEM_EDIT_CALLBACK(float43, "Tz", &delta_tower_angle_trim[C_AXIS], -5.0, 5.0, recalc_delta_settings);
|
||||
END_MENU();
|
||||
}
|
||||
|
||||
@@ -2777,7 +2804,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
#if ENABLED(DELTA_AUTO_CALIBRATION)
|
||||
MENU_ITEM(gcode, MSG_DELTA_AUTO_CALIBRATE, PSTR("G33"));
|
||||
MENU_ITEM(gcode, MSG_DELTA_HEIGHT_CALIBRATE, PSTR("G33 P1"));
|
||||
MENU_ITEM(gcode, MSG_DELTA_Z_OFFSET_CALIBRATE, PSTR("G33 P-1"));
|
||||
#if ENABLED(EEPROM_SETTINGS)
|
||||
MENU_ITEM(function, MSG_STORE_EEPROM, lcd_store_settings);
|
||||
MENU_ITEM(function, MSG_LOAD_EEPROM, lcd_load_settings);
|
||||
@@ -2877,6 +2903,7 @@ void kill_screen(const char* lcd_msg) {
|
||||
if (use_click()) { return lcd_goto_previous_menu_no_defer(); }
|
||||
ENCODER_DIRECTION_NORMAL();
|
||||
if (encoderPosition && !processing_manual_move) {
|
||||
refresh_cmd_timeout();
|
||||
|
||||
// Start with no limits to movement
|
||||
float min = current_position[axis] - 1000,
|
||||
@@ -3099,10 +3126,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
START_MENU();
|
||||
MENU_BACK(MSG_PREPARE);
|
||||
|
||||
#if HAS_SOFTWARE_ENDSTOPS && ENABLED(SOFT_ENDSTOPS_MENU_ITEM)
|
||||
MENU_ITEM_EDIT(bool, MSG_LCD_SOFT_ENDSTOPS, &soft_endstops_enabled);
|
||||
#endif
|
||||
|
||||
if (_MOVE_XYZ_ALLOWED) {
|
||||
if (_MOVE_XY_ALLOWED) {
|
||||
MENU_ITEM(submenu, MSG_MOVE_X, lcd_move_get_x_amount);
|
||||
@@ -4579,31 +4602,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
END_SCREEN();
|
||||
}
|
||||
|
||||
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
|
||||
void lcd_advanced_pause_continuous_purge_menu() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_1);
|
||||
#ifdef MSG_FILAMENT_CHANGE_PURGE_2
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_2);
|
||||
#define __FC_LINES_G 3
|
||||
#else
|
||||
#define __FC_LINES_G 2
|
||||
#endif
|
||||
#ifdef MSG_FILAMENT_CHANGE_PURGE_3
|
||||
STATIC_ITEM(MSG_FILAMENT_CHANGE_PURGE_3);
|
||||
#define _FC_LINES_G (__FC_LINES_G + 1)
|
||||
#else
|
||||
#define _FC_LINES_G __FC_LINES_G
|
||||
#endif
|
||||
#if LCD_HEIGHT > _FC_LINES_G + 1
|
||||
STATIC_ITEM(" ");
|
||||
#endif
|
||||
HOTEND_STATUS_ITEM();
|
||||
STATIC_ITEM(MSG_USERWAIT);
|
||||
END_SCREEN();
|
||||
}
|
||||
#endif
|
||||
|
||||
void lcd_advanced_pause_resume_message() {
|
||||
START_SCREEN();
|
||||
STATIC_ITEM_P(advanced_pause_header(), true, true);
|
||||
@@ -4629,9 +4627,6 @@ void kill_screen(const char* lcd_msg) {
|
||||
case ADVANCED_PAUSE_MESSAGE_WAIT_FOR_NOZZLES_TO_HEAT: return lcd_advanced_pause_wait_for_nozzles_to_heat;
|
||||
case ADVANCED_PAUSE_MESSAGE_OPTION: advanced_pause_menu_response = ADVANCED_PAUSE_RESPONSE_WAIT_FOR;
|
||||
return lcd_advanced_pause_option_menu;
|
||||
#if ENABLED(ADVANCED_PAUSE_CONTINUOUS_PURGE)
|
||||
case ADVANCED_PAUSE_MESSAGE_CONTINUOUS_PURGE: return lcd_advanced_pause_continuous_purge_menu;
|
||||
#endif
|
||||
case ADVANCED_PAUSE_MESSAGE_STATUS:
|
||||
default: break;
|
||||
}
|
||||
@@ -5034,19 +5029,17 @@ void lcd_update() {
|
||||
const bool sd_status = IS_SD_INSERTED;
|
||||
if (sd_status != lcd_sd_status && lcd_detected()) {
|
||||
|
||||
bool old_sd_status = lcd_sd_status; // prevent re-entry to this block!
|
||||
lcd_sd_status = sd_status;
|
||||
|
||||
if (sd_status) {
|
||||
safe_delay(1000); // some boards need a delay or the LCD won't show the new status
|
||||
card.initsd();
|
||||
if (old_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_INSERTED);
|
||||
if (lcd_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_INSERTED);
|
||||
}
|
||||
else {
|
||||
card.release();
|
||||
if (old_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_REMOVED);
|
||||
if (lcd_sd_status != 2) LCD_MESSAGEPGM(MSG_SD_REMOVED);
|
||||
}
|
||||
|
||||
lcd_sd_status = sd_status;
|
||||
lcdDrawUpdate = LCDVIEW_CLEAR_CALL_REDRAW;
|
||||
lcd_implementation_init( // to maybe revive the LCD if static electricity killed it.
|
||||
#if ENABLED(LCD_PROGRESS_BAR)
|
||||
|
||||
Reference in New Issue
Block a user