jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Build fixes for stm32

Browse Source
This commit is contained in:
InsanityAutomation
2023-08-26 14:31:18 -04:00
parent 8d44b6c427
commit e0ff391eba
5 changed files with 59 additions and 64 deletions
Download Patch File Download Diff File Expand all files Collapse all files
Marlin/Configuration.h
+30 -30
View File
@@ -148,7 +148,7 @@
// Touchscreen options - only 32 bit boards have the open serial ports to use with graphics displays above
//#define FORCE10SPRODISPLAY
//#define INSANITYAUTOMATION_DWIN
//#define AddonFilSensor //Adds a filament runout sensor to the CR20 or Ender 4
//#define lerdgeFilSensor //Using lerdge filament sensor, which is opposite polarity to stock
@@ -349,7 +349,7 @@
// Enable to show the bitmap in Marlin/_Bootscreen.h on startup.
#if BOTH(PowerShutoffKit, EnclosureLight)
#if ENABLED(PowerShutoffKit, EnclosureLight)
#undef EnclosureLight
#endif
@@ -368,7 +368,7 @@
#if ANY(SKRMiniE3V2, SKRMiniE3V3, SKRE3Turbo)
#define SKR_2209
#define SKR_UART
#if NONE(FORCE10SPRODISPLAY, MachineEnder3Touchscreen, FORCEV2DISPLAY)
#if NONE(INSANITYAUTOMATION_DWIN, MachineEnder3Touchscreen, FORCEV2DISPLAY)
#define OrigLCD
#else
#define NO_CONTROLLER_CUSTOM_WIRING_WARNING
@@ -512,8 +512,8 @@
#endif
#if ANY(MachineCRX, MachineCRXPro, MachineEnder5Plus, MachineCR10SPro, MachineCR5, MachineCR10Max, MachineEnder6, MachineSermoonD1, MachineEnder7, MachineCR10Smart, MachineCR10SmartPro)
#if NONE(GraphicLCD, OrigLCD, FORCE10SPRODISPLAY)
#define FORCE10SPRODISPLAY
#if NONE(GraphicLCD, OrigLCD, INSANITYAUTOMATION_DWIN)
#define INSANITYAUTOMATION_DWIN
#endif
#endif
@@ -561,8 +561,8 @@
#define lerdgeFilSensor
#endif
#if (ANY(Creality422, Creality427, MachineEnder2Pro) && DISABLED(MachineEnder3V2)) || BOTH(OrigLCD, MachineEnder6)
#ifndef FORCE10SPRODISPLAY
#if (ANY(Creality422, Creality427, MachineEnder2Pro) && DISABLED(MachineEnder3V2)) || ENABLED(OrigLCD, MachineEnder6)
#ifndef INSANITYAUTOMATION_DWIN
#ifndef MachineEnder3Touchscreen
#ifndef FORCEV2DISPLAY
#define RET6_12864_LCD
@@ -578,7 +578,7 @@
#define HotendStock
#endif
#if NONE(ABL_UBL, ABL_BI, FORCE10SPRODISPLAY)
#if NONE(ABL_UBL, ABL_BI, INSANITYAUTOMATION_DWIN)
#define ABL_BI
#endif
@@ -641,7 +641,7 @@
#define MachineLargeROM
#endif
#if NONE(MachineCR10Orig, MachineEnder4, MachineCR10SPro, MachineCRX, MachineCR10Max, MachineEnder5Plus, MachineCR5, SKRMiniE3V2, FORCE10SPRODISPLAY) || ENABLED(GraphicLCD)
#if NONE(MachineCR10Orig, MachineEnder4, MachineCR10SPro, MachineCRX, MachineCR10Max, MachineEnder5Plus, MachineCR5, SKRMiniE3V2, INSANITYAUTOMATION_DWIN) || ENABLED(GraphicLCD)
#define SHOW_BOOTSCREEN
// Show the bitmap in Marlin/_Bootscreen.h on startup.
@@ -678,14 +678,14 @@
* Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
* :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
*/
#if ANY(SKR13, SKR14, SKR14Turbo, SKRE3Turbo) && ENABLED(FORCE10SPRODISPLAY)
#if ANY(SKR13, SKR14, SKR14Turbo, SKRE3Turbo) && ENABLED(INSANITYAUTOMATION_DWIN)
#define LCD_SERIAL_PORT 0
#define LCD_BAUDRATE 115200
#define SERIAL_CATCHALL -1
#elif ANY(SKR13, SKR14, SKR14Turbo, SKRPRO11, SKRE3Turbo) && NONE(MachineEnder3V2, MachineEnder3S1, MachineEnder3Touchscreen, FORCEV2DISPLAY)
#define SERIAL_PORT_2 0
#elif ANY(SKRMiniE3V2, SKRMiniE3V3)
#if ANY(FORCE10SPRODISPLAY, MachineEnder3Touchscreen)
#if ANY(INSANITYAUTOMATION_DWIN, MachineEnder3Touchscreen)
#define LCD_SERIAL_PORT 2
#define LCD_BAUDRATE 115200
#define SERIAL_CATCHALL -1
@@ -1446,11 +1446,11 @@
#if ENABLED(HotendMosquito)
#define HEATER_0_MAXTEMP 450
#elif ENABLED(HotendAllMetal)
#define HEATER_0_MAXTEMP 315
#define HEATER_0_MAXTEMP 300
#else
#define HEATER_0_MAXTEMP 255
#endif
#define HEATER_1_MAXTEMP 275
#define HEATER_1_MAXTEMP HEATER_0_MAXTEMP
#define HEATER_2_MAXTEMP 275
#define HEATER_3_MAXTEMP 275
#define HEATER_4_MAXTEMP 275
@@ -2080,13 +2080,13 @@
#define W_MAX_ENDSTOP_HIT_STATE HIGH
#if NONE(ABL_EZABL, MachineCR2020)
#define Z_MIN_ENDSTOP_INVERTING HIGH // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING HIGH // set to true to invert the logic of the probe.
#define Z_MIN_ENDSTOP_HIT_STATE HIGH // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_HIT_STATE HIGH // set to true to invert the logic of the probe.
#else
#define Z_MIN_ENDSTOP_INVERTING LOW // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_INVERTING LOW // set to true to invert the logic of the probe.
#define Z_MIN_ENDSTOP_HIT_STATE LOW // set to true to invert the logic of the endstop.
#define Z_MIN_PROBE_ENDSTOP_HIT_STATE LOW // set to true to invert the logic of the probe.
#endif
#define Z_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_INVERTING
#define Z_MAX_ENDSTOP_HIT_STATE Z_MIN_ENDSTOP_HIT_STATE
// Enable this feature if all enabled endstop pins are interrupt-capable.
@@ -3394,9 +3394,9 @@
//#define AUTO_BED_LEVELING_LINEAR
#if ENABLED(ABL_UBL)
#define AUTO_BED_LEVELING_UBL
#elif ENABLED(PROBE_MANUALLY) && ANY(MachineEnder3Touchscreen, FORCE10SPRODISPLAY)
#elif ENABLED(PROBE_MANUALLY) && ANY(MachineEnder3Touchscreen, INSANITYAUTOMATION_DWIN)
#define MESH_BED_LEVELING
#elif !BOTH(OrigLA, MachineCR10Orig) && DISABLED(MachineCR30)
#elif !ENABLED(OrigLA, MachineCR10Orig) && DISABLED(MachineCR30)
#define AUTO_BED_LEVELING_BILINEAR
#endif
/**
@@ -3533,7 +3533,7 @@
//========================= Unified Bed Leveling ============================
//===========================================================================
#define MESH_INSET 1
#if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder4, OrigLCD, MachineEnder3Touchscreen, FORCE10SPRODISPLAY) || ANY(GraphicLCD, OrigLCD)
#if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder4, OrigLCD, MachineEnder3Touchscreen, INSANITYAUTOMATION_DWIN) || ANY(GraphicLCD, OrigLCD)
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
#endif
@@ -3593,7 +3593,7 @@
* Add a bed leveling sub-menu for ABL or MBL.
* Include a guided procedure if manual probing is enabled.
*/
#if NONE(ABL_EZABL, ABL_NCSW, ABL_BLTOUCH, ABL_TOUCH_MI, SKRMiniE3V2, MachineEnder3V2, FORCE10SPRODISPLAY, MachineCR6, MachineCR6Max, MachineSermoonD1, MachineEnder7, MachineCR30, MachineCR10Smart, MachineCR10SmartPro, FORCEV2DISPLAY) && (NONE(MachineCRX, MachineEnder3Touchscreen) || ANY(GraphicLCD, OrigLCD))
#if NONE(ABL_EZABL, ABL_NCSW, ABL_BLTOUCH, ABL_TOUCH_MI, SKRMiniE3V2, MachineEnder3V2, INSANITYAUTOMATION_DWIN, MachineCR6, MachineCR6Max, MachineSermoonD1, MachineEnder7, MachineCR30, MachineCR10Smart, MachineCR10SmartPro, FORCEV2DISPLAY) && (NONE(MachineCRX, MachineEnder3Touchscreen) || ANY(GraphicLCD, OrigLCD))
#define LCD_BED_LEVELING
#endif
@@ -3610,9 +3610,9 @@
#define LCD_BED_TRAMMING
#endif
#if ENABLED(LCD_BED_TRAMMING)
//#define BED_TRAMMING_INSET_LFRB { 22, 22, 22, 22 } // (mm) Left, Front, Right, Back insets
//#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
//#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points
#define BED_TRAMMING_INSET_LFRB { 22, 22, 22, 22 } // (mm) Left, Front, Right, Back insets
#define BED_TRAMMING_HEIGHT 0.0 // (mm) Z height of nozzle at tramming points
#define BED_TRAMMING_Z_HOP 4.0 // (mm) Z height of nozzle between tramming points
//#define BED_TRAMMING_INCLUDE_CENTER // Move to the center after the last corner
//#define BED_TRAMMING_USE_PROBE
#if ENABLED(BED_TRAMMING_USE_PROBE)
@@ -4300,9 +4300,9 @@
#define MKS_MINI_12864
#elif ANY(MachineEnder3V2, FORCEV2DISPLAY, MachineEnder3S1) && DISABLED(MachineEnder3Touchscreen)
#define DWIN_MARLINUI_PORTRAIT
#elif ANY(OrigLCD, MachineCR10Orig, MachineEnder3Pro422, MachineEnder3Pro427, MachineEnder3Max, SKRMiniE3V2, SKRE3Turbo) && NONE(GraphicLCD, MachineEnder3Touchscreen, FORCE10SPRODISPLAY)
#elif ANY(OrigLCD, MachineCR10Orig, MachineEnder3Pro422, MachineEnder3Pro427, MachineEnder3Max, SKRMiniE3V2, SKRE3Turbo) && NONE(GraphicLCD, MachineEnder3Touchscreen, INSANITYAUTOMATION_DWIN)
#define CR10_STOCKDISPLAY
#elif NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, OrigLCD, MachineCR10Orig, SKRMiniE3V2, SKRMiniE3V3, FORCE10SPRODISPLAY, MachineCR6, MachineCR6Max, MachineCR10Smart, MachineCR10SmartPro, MachineEnder3Touchscreen) || ENABLED(GraphicLCD)
#elif NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, OrigLCD, MachineCR10Orig, SKRMiniE3V2, SKRMiniE3V3, INSANITYAUTOMATION_DWIN, MachineCR6, MachineCR6Max, MachineCR10Smart, MachineCR10SmartPro, MachineEnder3Touchscreen) || ENABLED(GraphicLCD)
#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
#endif
//
@@ -4694,9 +4694,9 @@
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extui'.
//
#if ANY(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder6, MachineCR5, MachineEnder7, MachineSermoonD1, MachineCR10Smart, MachineCR10SmartPro) && (NONE(GraphicLCD, OrigLCD)) || ENABLED(FORCE10SPRODISPLAY)
#ifndef FORCE10SPRODISPLAY
#define FORCE10SPRODISPLAY
#if ANY(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder6, MachineCR5, MachineEnder7, MachineSermoonD1, MachineCR10Smart, MachineCR10SmartPro) && (NONE(GraphicLCD, OrigLCD)) || ENABLED(INSANITYAUTOMATION_DWIN)
#ifndef INSANITYAUTOMATION_DWIN
#define INSANITYAUTOMATION_DWIN
#endif
#define EXTENSIBLE_UI
#endif
Marlin/Configuration_adv.h
+3 -7
View File
@@ -336,7 +336,7 @@
*/
#if ENABLED(THERMAL_PROTECTION_BED)
#if(ENABLED(BedDC))
#if EITHER(MachineS5, MachineCR10Max)
#if ANY(MachineS5, MachineCR10Max)
#define THERMAL_PROTECTION_BED_PERIOD 240 // Seconds
#define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius
@@ -1631,7 +1631,6 @@
// Scroll a longer status message into view
#define STATUS_MESSAGE_SCROLLING
#endif
// Apply a timeout to low-priority status messages
//#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -2081,7 +2080,7 @@
//
// Additional options for DGUS / DWIN displays
//
#if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(FORCE10SPRODISPLAY)
#if HAS_DGUS_LCD || ENABLED(DGUS_LCD_UI_CREALITY_TOUCH) || ENABLED(INSANITYAUTOMATION_DWIN)
#define DGUS_RX_BUFFER_SIZE 256
#define DGUS_TX_BUFFER_SIZE 32
#ifndef LCD_SERIAL_PORT
@@ -2089,9 +2088,7 @@
#define LCD_BAUDRATE 115200
#endif
#define DGUS_RX_BUFFER_SIZE 128
#define DGUS_TX_BUFFER_SIZE 48
#if ENABLED(FORCE10SPRODISPLAY) && DISABLED(Creality422, Creality427)
#if ENABLED(INSANITYAUTOMATION_DWIN) && DISABLED(Creality422, Creality427)
#define SERIAL_STATS_RX_BUFFER_OVERRUNS // Fix Rx overrun situation (Currently only for AVR)
#endif
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
@@ -2340,7 +2337,6 @@
#define BABYSTEP_GFX_OVERLAY // Enable graphical overlay on Z-offset editor
#endif
#endif
#define BABYSTEP_HOTEND_Z_OFFSET // For multiple hotends, babystep relative Z offsets
#endif
// @section extruder
Marlin/src/HAL/STM32/MarlinSerial.h
+1
View File
@@ -40,6 +40,7 @@ struct MarlinSerial : public HardwareSerial {
inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void _rx_complete_irq(serial_t *obj);
FORCE_INLINE static uint8_t buffer_overruns() { return 0; }
protected:
usart_rx_callback_t _rx_callback;
Marlin/src/lcd/extui/ia_dwin/Creality_DWIN.cpp
+4 -6
View File
@@ -606,7 +606,7 @@ int RTSSHOW::RTS_RecData()
if(!DWIN_SERIAL.connected())
DWIN_SERIAL.begin(115200);
//#if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS)
#if ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS) && defined(__AVR__)
if ((!DWIN_SERIAL.available() && DWIN_SERIAL.buffer_overruns()) || DWIN_SERIAL.dropped() > 0) {
// Overrun, but reset the flag only when the buffer is empty
// We want to extract as many as valid datagrams possible...
@@ -615,9 +615,7 @@ int RTSSHOW::RTS_RecData()
//DWIN_SERIAL.reset_rx_overun();
DWIN_SERIAL.flush();
}
#endif
#endif
while (DWIN_SERIAL.available()) {
switch (rx_datagram_state) {
@@ -791,7 +789,7 @@ void RTSSHOW::RTS_SndData(const char *str, unsigned long addr, unsigned char cmd
uint8_t expected_tx = 6 + len; // 6 bytes header + payload.
const millis_t try_until = ExtUI::safe_millis() + 1000;
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) && defined(__AVR__)
while (expected_tx > DWIN_SERIAL.get_tx_buffer_free()) {
if (ELAPSED(ExtUI::safe_millis(), try_until)) return; // Stop trying after 1 second
@@ -923,7 +921,7 @@ void RTSSHOW::WriteVariable(uint16_t adr, const void* values, uint8_t valueslen,
uint8_t expected_tx = 6 + valueslen; // 6 bytes header + payload.
const millis_t try_until = ExtUI::safe_millis() + 1000;
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS)
#if ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS) && defined(__AVR__)
while (expected_tx > DWIN_SERIAL.get_tx_buffer_free()) {
if (ELAPSED(ExtUI::safe_millis(), try_until)) return; // Stop trying after 1 second
platformio.ini
+21 -21
View File
@@ -643,25 +643,25 @@ build_flags = ${common.build_flags} -DMachineEnder5Plus -DHotendAllMetal -DBedDC
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN
[env:CRX_BLT_UBL_NoFil]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN
[env:CRX_BLT_BIL_Fil]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DFilSensors
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DFilSensors
[env:CRX_BLT_UBL_Fil]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY -DFilSensors
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN -DFilSensors
[env:CRX_NoFil]
platform = atmelavr
@@ -1245,25 +1245,25 @@ build_flags = ${common.build_flags} -DMachineEnder5Plus -DHotendAllMetal -DBedDC
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DHotendMosquito
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DHotendMosquito
[env:CRX_BLT_UBLNoFilMC]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY -DHotendMosquito
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN -DHotendMosquito
[env:CRX_BLT_BIL_Fil_MC]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DFilSensors -DHotendMosquito
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DFilSensors -DHotendMosquito
[env:CRX_BLT_UBL_Fil_MC]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY -DFilSensors -DHotendMosquito
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN -DFilSensors -DHotendMosquito
[env:CRX_NoFil_MC]
platform = atmelavr
@@ -1641,25 +1641,25 @@ build_flags = ${common.build_flags} -DMachineEnder5Plus -DHotendAllMetal -DBedDC
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DHotendMosquito -DHotendE3D
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DHotendMosquito -DHotendE3D
[env:CRX_BLTUBLNoFilME]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY -DHotendMosquito -DHotendE3D
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN -DHotendMosquito -DHotendE3D
[env:CRX_BLT_BIL_Fil_ME]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DFilSensors -DHotendMosquito -DHotendE3D
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DFilSensors -DHotendMosquito -DHotendE3D
[env:CRX_BLT_UBL_Fil_ME]
platform = atmelavr
extends = common_avr8
board = megaatmega2560
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DFORCE10SPRODISPLAY -DFilSensors -DHotendMosquito -DHotendE3D
build_flags = ${common.build_flags} -DMachineCRX -DHotendAllMetal -DBedDC -DABL_BLTOUCH -DABL_UBL -DINSANITYAUTOMATION_DWIN -DFilSensors -DHotendMosquito -DHotendE3D
[env:CRX_NoFil_ME]
platform = atmelavr
@@ -3328,7 +3328,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DFORCE10SPRODISPLAY
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DINSANITYAUTOMATION_DWIN
[env:SermoonD1_BLT]
extends = stm32_variant
@@ -3346,7 +3346,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DFORCE10SPRODISPLAY -DABL_BLTOUCH
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DINSANITYAUTOMATION_DWIN -DABL_BLTOUCH
[env:SermoonD1_BLT_ZM]
extends = stm32_variant
@@ -3364,7 +3364,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DFORCE10SPRODISPLAY -DABL_BLTOUCH -DCreality42XUseZMin
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineSermoonD1 -DINSANITYAUTOMATION_DWIN -DABL_BLTOUCH -DCreality42XUseZMin
[env:Ender6]
@@ -3383,7 +3383,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DFORCE10SPRODISPLAY
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DINSANITYAUTOMATION_DWIN
[env:Ender6_BLT]
@@ -3402,7 +3402,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DABL_BLTOUCH -DFORCE10SPRODISPLAY
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN
[env:Ender6_BLT_ZM]
extends = stm32_variant
@@ -3420,7 +3420,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DCreality42XUseZMin
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder6 -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DCreality42XUseZMin
[env:Ender7]
extends = stm32_variant
@@ -3438,7 +3438,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DFORCE10SPRODISPLAY
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DINSANITYAUTOMATION_DWIN
[env:Ender7_BLT]
@@ -3457,7 +3457,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DABL_BLTOUCH -DFORCE10SPRODISPLAY
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN
[env:Ender7_BLT_ZM]
extends = stm32_variant
@@ -3475,7 +3475,7 @@ board = genericSTM32F103RC
build_flags = ${stm32_variant.build_flags}
-DMCU_STM32F103RE -DHAL_SD_MODULE_ENABLED
-DSS_TIMER=4 -DTIMER_SERVO=TIM5
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DABL_BLTOUCH -DFORCE10SPRODISPLAY -DCreality42XUseZMin
-DENABLE_HWSERIAL3 -DTRANSFER_CLOCK_DIV=8 -DMachineEnder7 -DABL_BLTOUCH -DINSANITYAUTOMATION_DWIN -DCreality42XUseZMin
[env:CR6_452]
extends = stm32_variant