Set configs disabled, add tests

Marlin/Configuration.h

@@ -1653,7 +1653,7 @@
   // For a purge/clean station mounted on the X axis
   //#define NOZZLE_CLEAN_NO_Y
 
-  #define NOZZLE_CLEAN_MIN_TEMP
+  //#define NOZZLE_CLEAN_MIN_TEMP
   #if ENABLED(NOZZLE_CLEAN_MIN_TEMP)
     #define NOZZE_CLEAN_TEMP  170
     // Default behavior is to skip nozzles that are too cold. The allows you to force them to heat instead

Marlin/src/libs/nozzle.cpp

@@ -31,6 +31,10 @@ Nozzle nozzle;
 #include "../MarlinCore.h"
 #include "../module/motion.h"
 
+#if ENABLED(NOZZLE_CLEAN_MIN_TEMP)
+  #include "../module/temperature.h"
+#endif
+
 #if ENABLED(NOZZLE_CLEAN_FEATURE)
 
   /**
@@ -154,7 +158,7 @@ Nozzle nozzle;
     const uint8_t arrPos = ANY(SINGLENOZZLE, MIXING_EXTRUDER) ? 0 : active_extruder;
 
     #if ENABLED(NOZZLE_CLEAN_MIN_TEMP) && NOZZE_CLEAN_TEMP > 0
-      if(thermalManager.degTargetHotend(arrPos)) < NOZZE_CLEAN_TEMP) {
+      if(thermalManager.degTargetHotend(arrPos) < NOZZE_CLEAN_TEMP) {
         #if ENABLED(NOZLE_CLEAN_HEAT_LOWTEMP)
           SERIAL_ECHOLNPGM("Nozzle too Cold - Heating");
           thermalManager.setTargetHotend(NOZZE_CLEAN_TEMP, arrPos);

Marlin/src/module/probe.cpp

@@ -352,7 +352,6 @@ bool Probe::set_deployed(const bool deploy) {
   bool setting_hotend = false;
   #if defined(PROBE_REQUIRES_MINTEMP_NOZZLE) && PROBE_REQUIRES_MINTEMP_NOZZLE < 0 && HAS_TEMP_HOTEND
     if (thermalManager.degTargetHotend(0) < PROBE_REQUIRES_MINTEMP_NOZZLE) {
-      bool setting_hotend = false;
       uint16_t hotendTemperature = AUTOLEVEL_PREHEAT_NOZZLE_TEMP;
       SERIAL_ECHOLNPAIR("Preheating hot-end to ", hotendTemperature);
       thermalManager.setTargetHotend(hotendTemperature, 0);

buildroot/tests/LPC1768-tests

@@ -42,11 +42,12 @@ opt_enable REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER SDSUPPORT ADAPTIVE_FAN_
            NOZZLE_AS_PROBE AUTO_BED_LEVELING_BILINEAR G29_RETRY_AND_RECOVER Z_MIN_PROBE_REPEATABILITY_TEST DEBUG_LEVELING_FEATURE \
            BABYSTEPPING BABYSTEP_XY BABYSTEP_ZPROBE_OFFSET BABYSTEP_ZPROBE_GFX_OVERLAY \
            PRINTCOUNTER NOZZLE_PARK_FEATURE NOZZLE_CLEAN_FEATURE SLOW_PWM_HEATERS PIDTEMPBED EEPROM_SETTINGS INCH_MODE_SUPPORT TEMPERATURE_UNITS_SUPPORT \
-           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE \
+           Z_SAFE_HOMING ADVANCED_PAUSE_FEATURE PARK_HEAD_ON_PAUSE NOZZLE_CLEAN_MIN_TEMP \
            HOST_KEEPALIVE_FEATURE HOST_ACTION_COMMANDS HOST_PROMPT_SUPPORT \
            LCD_INFO_MENU ARC_SUPPORT BEZIER_CURVE_SUPPORT EXTENDED_CAPABILITIES_REPORT AUTO_REPORT_TEMPERATURES SDCARD_SORT_ALPHA EMERGENCY_PARSER
 opt_set GRID_MAX_POINTS_X 16
 opt_set NOZZLE_TO_PROBE_OFFSET "{ 0, 0, 0 }"
+opt_set NOZZE_CLEAN_TEMP  170
 exec_test $1 $2 "Re-ARM with NOZZLE_AS_PROBE and many features." "$3"
 
 # clean up

buildroot/tests/rambo-tests

@@ -22,6 +22,8 @@ opt_add TEMP_CHAMBER_PIN 3
 opt_add HEATER_CHAMBER_PIN 45
 opt_set GRID_MAX_POINTS_X 16
 opt_set FANMUX0_PIN 53
+opt_set PROBE_REQUIRES_MINTEMP_NOZZLE 150
+opt_set PROBE_REQUIRES_MINTEMP_BED 50
 opt_disable USE_WATCHDOG
 opt_enable REPRAP_DISCOUNT_SMART_CONTROLLER LCD_PROGRESS_BAR LCD_PROGRESS_BAR_TEST \
            FIX_MOUNTED_PROBE Z_SAFE_HOMING CODEPENDENT_XY_HOMING PIDTEMPBED PROBE_TEMP_COMPENSATION \