ba46edec2a
Fix 5 mixing steppers, etc.
...
Co-Authored-By: neorex <neorex99@gmail.com >
2018-08-29 03:21:43 -05:00
99393550f2
[1.1.x] Silently drop M108, M112 and M410 with emergency parser enabled ( #11666 )
2018-08-28 20:48:31 -05:00
4f0737cd2c
Fix SD percent for Lite Status Screen
...
Co-Authored-By: Lê Hoàng <icy.lord.love.angel@gmail.com >
2018-08-26 17:13:58 -05:00
cf1b2af71a
Update Ultimaker servo pin
...
As pointed out at https://github.com/MarlinFirmware/Marlin/issues/7981#issuecomment-407116642
2018-08-21 11:38:45 -05:00
903ccb4b60
Always disable/restore leveling on tool-change
...
Counterpart to #11559 and its followup.
Co-Authored-By: InsanityAutomation <insanityautomation@users.noreply.github.com >
2018-08-21 09:13:36 -05:00
b303affbb0
Fix typo in .travis.yml
2018-08-21 07:55:00 -05:00
3f75c5df7c
Fix Homing/UBL
...
Co-Authored-By: smoki3 <kevinbayer8@gmail.com >
2018-08-21 07:49:13 -05:00
e5de565987
Fix up Max7219 orientations ( #11597 )
2018-08-20 20:31:40 -05:00
feb55517af
[1.1.x] Max7219 cleanup, simplify, and extend ( #11574 )
2018-08-18 01:48:28 -05:00
2f2f16c340
Marlin assumes signed chars
2018-08-16 21:18:20 -05:00
3ef6cf0bfb
declare void Max7219_register_setup();
2018-08-15 10:39:08 -05:00
5f0798544e
Update Czech language
...
Co-Authored-By: petrzjunior <junior@zahradnik.cz >
2018-08-14 18:47:24 -05:00
b4efefea8b
[1.1.x] Fix TMC2208 SW serial communication ( #11548 )
...
* New TMC2208 constructor
* Update default driver configuration
2018-08-14 18:44:17 -05:00
e518533a75
Change M7219 I to setup Max7219 registers, but not do initialization pattern
2018-08-13 17:48:17 -05:00
02381d6821
Make M7219 I more robust and nicer to look at
2018-08-13 17:05:13 -05:00
263beae3e9
Add I parameter to ignore pin protection on M42
2018-08-13 16:50:24 -05:00
cc6a31528d
Improve AXIS_DRIVER_TYPE macros
2018-08-13 16:50:24 -05:00
5482af38f0
Remove oversampled data from thermistor table 71 ( #11504 )
...
Data in Table 71 is extremely oversampled (see Issue #11220 ). I have removed the data points that perform *worse* than linearly interpolating the remaining points, and fixed up two points that were simply rounded incorrectly.
2018-08-13 02:52:48 -05:00
a9cb4834da
Allow Einsy RAMBo FAN1_PIN override
2018-08-13 02:48:25 -05:00
7b0a8e85ba
Fix pca9632_set_led_color lost i2c connection ( #11530 )
2018-08-12 18:05:00 -05:00
77625654f4
Reduce max accel in Creality configs
2018-08-11 22:57:44 -05:00
bdb2dd27ad
Allow G33 to compile with no LCD
2018-08-11 22:45:04 -05:00
f1467ddc0e
UBL/planner patch tweaks
2018-08-11 22:45:04 -05:00
105d20c2e8
Account for UBL correction when setting the planner position ( #11511 )
2018-08-10 13:00:45 -05:00
9e46e84a55
Treat TMC2660 like non-TMC ( #11485 )
2018-08-10 00:30:11 -05:00
4f59ee8978
Minor spacing fixes
2018-08-07 14:00:48 -05:00
e741241721
No raise when homing after power-loss
2018-08-07 13:50:33 -05:00
332a80cadb
Restore bugfix README, etc.
2018-08-07 13:45:03 -05:00
614a944504
auto power control without heated bed ( #11467 )
...
`AUTO_POWER_CONTROL` will not work if printer has no heated bed due to `degTargetBed()` not being defined
2018-08-06 23:18:13 -05:00
33364c17b9
[1.1.x] Better timing handling ( #11462 )
2018-08-06 23:14:11 -05:00
b8d4c4216f
Easier to disable homing validation ( #11457 )
2018-08-06 23:11:28 -05:00
86d9af1108
Fix drivers.h dependency, defer macro evaluation ( #11449 )
2018-08-03 21:48:57 -05:00
4c4fffc503
[1.1.x] Fix Dual X Carriage tool change crash ( #11425 )
2018-08-03 20:47:19 -05:00
fae96a6a13
Fix jumping progress bar. ( #11438 )
...
- When `LCD_SET_PROGRESS_MANUALLY` was disabled and an SD print was not active (i.e. the printer was idle), progress_bar_percent would read uninitialized memory from stack and cause progress bar to jump wildly.
- Also updated conditions in `#ifdef` to match `ultralcd.cpp`
2018-08-03 17:16:14 -05:00
7d491aa015
Tiny improvement to M7219
...
The registers within the Max7219 can get corrupted a number of ways. This allows the Max7219 to be reset and fully initialized.
And... it also allows the user to see the initialization pattern.
2018-08-02 18:43:36 -05:00
888d319145
Align some config options
2018-08-02 18:42:20 -05:00
a2ac7e1407
Add M915 to Prepare Menu ( #11383 )
2018-07-31 02:03:49 -05:00
8db91f0bd1
Clean up 12864 OLED code ( #11388 )
2018-07-30 23:02:12 -05:00
c4f4c255b4
Fix initial safe_speed in jerk code ( #11396 )
2018-07-30 22:49:20 -05:00
33c37d587d
Revert "[1.1.x] idex and bl touch fix" ( #11406 )
...
* Revert "[1.1.x] bltouch home refinements (#11398 )"
This reverts commit 30839a6ba6#11392 )"
This reverts commit e1bef0ea79
2018-07-28 23:14:41 -05:00
30839a6ba6
[1.1.x] bltouch home refinements ( #11398 )
...
Just create a better functions call logic flow
2018-07-28 19:29:26 -05:00
e1bef0ea79
[1.1.x] idex and bl touch fix ( #11392 )
...
* [1.1.x] IDEX and BLTouch Fixes
Fix bltouch not deploying during fast home, fix dual x carriage setting opposing side park position as destination on tool change
* Update Marlin_main.cpp
* Update Marlin_main.cpp
* Change brackets to be more in conformance with Marlin coding standards
2018-07-28 10:33:35 -05:00
7284488da3
[1.1.x] fix bltouch homing ( #11380 )
...
Partially revert. Seems to solve the issue, but one report says G29 still fails.
2018-07-27 18:29:26 -05:00
cab2e0877e
Update DELAY_10US
2018-07-26 20:21:50 -05:00
b6f24992ee
[1.1.x] Update fastio_1280.h pin mapping comments ( #11374 )
2018-07-26 05:19:05 -05:00
c30f636d22
Improve drivers.h macros ( #11372 )
2018-07-26 05:10:11 -05:00
2f76ec5c6a
[1.1.x]-different-bltouch-init ( #11358 )
2018-07-26 05:03:39 -05:00
56fbe3361b
Ensure ADC conversion is complete before reading ( #11370 )
...
Co-Authored-By: gloomyandy <andy-git@gloomy-place.com >
2018-07-26 03:58:33 -05:00
b5ed4a1a8c
Fix thermistor type in Anet A6 config ( #11346 )
...
I have Anet a6 and my thermistor is NTC 3950. If the default is 5 (ATC Semitec 104GT-2) it gives overheat upto 330 degrees (real) instead of 250 (displayed). I don't know for sure if all the A6 have such thermistor but I think it's safer to have underheat than overheat. And 3950 looks more spread among A6 searching on Internet. The same is true for the bed though it has small difference at the beginning of scale, actually +-2 degrees.
2018-07-26 02:03:30 -05:00
5061c3a016
Merge pull request #11368 from thinkyhead/bf1_pwm_adjustments
...
[1.1.x] Tweak some SoftPWM code
2018-07-25 19:02:10 -05:00
Scott Lahteine
srieche
Scott Lahteine
Roxy-3D
teemuatlut
Aaron Griffith
Shen Yiming
Thomas Moore
lsellens
Giuliano
silentninja1
Marcio Teixeira
MikeLud
bleughb
vitekn