db057eb453
Fix tool_change call in UBL G29
...
Fix #11279 , #11252
2018-07-18 20:35:14 -05:00
5ce312f158
Merge pull request #11305 from thinkyhead/bf1_power_loss_pin
...
[1.1.x] Add support for power loss detect pin
2018-07-18 20:13:47 -05:00
389f2ac81f
planner.synchronize at start of tool_change
...
See https://github.com/MarlinFirmware/Marlin/issues/10949#issuecomment-398540498
2018-07-18 20:09:39 -05:00
7321f30ac0
Add POWER_LOSS_PIN support
2018-07-18 19:58:06 -05:00
46b0e054b1
Add POWER_LOSS_PIN to example configs
2018-07-18 19:58:06 -05:00
9d0627d66c
Make GCodeParser::debug static ( #11294 )
2018-07-17 23:38:39 -05:00
76ec07301d
Merge pull request #11297 from thinkyhead/bf1_malyan_lcd_update
...
[1.1.x] Better Malyan LCD Feedrate/Temp handling
2018-07-17 21:07:04 -05:00
6024ffedd9
Improve Malyan progress / feedrate
...
Co-Authored-By: J.C. Nelson <xc0000005@users.noreply.github.com >
2018-07-17 19:33:57 -05:00
7e648f3721
Add card.longest_filename, more lcd_strlen updates
2018-07-17 19:33:57 -05:00
036f25e159
More lcd_strlen updates
2018-07-17 18:17:19 -05:00
17e1eec21e
Make sure linear units are initialized
...
Based on #11295
Co-Authored-By: Giuliano <gmagician@users.noreply.github.com >
2018-07-17 17:20:57 -05:00
58775cc694
Don't display M421 values for UBL at startup
...
It takes 20 seconds to display the mesh values at startup... If we are going to display this information at startup, we should find a more terse way to do it. Perhaps displaying an entire row of the mesh at a time makes sense?
2018-07-17 17:17:09 -05:00
fbc3fdb490
LCD strlen functions like 2.0.x
2018-07-17 15:25:58 -05:00
756080fcca
Followup to floats patch
2018-07-17 15:24:33 -05:00
e6801ff84a
[1.1.x] Fix change filament ( #11268 )
...
Prevent crash, on filament change, when printer is not homed
2018-07-16 21:48:45 -05:00
bc961220b7
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's
...
Change Max7219_idle_task() routines to use single line if X-Axis has 16 or more LED's
This gets bugfix_1.1.x at parity with https://github.com/MarlinFirmware/Marlin/pull/11285 when it gets merged.
2018-07-16 19:23:59 -05:00
256f76d35e
Fix Vellemann K8400 Configuration ( #11258 )
...
The maximum movement is 180mm for Velleman K8400.
An offset of `Y_MIN_POS` violates an assertion in `SanityCheck.h`.
Code tested on Vellemann K8400 with Dual Extruder.
2018-07-13 23:15:00 -05:00
1067c43107
[1.1.x] fix kill printer ( #11261 )
...
This will fix kill message on dual printer with 0 alignment offset
2018-07-13 23:13:29 -05:00
d60b2e5ba8
Merge pull request #11233 from nightgryphon/multiprobe-z-up
...
[1.1.x] Shorter Z raise between multiple probes
2018-07-12 22:44:25 -05:00
cb0777dbeb
Merge pull request #11248 from thinkyhead/bf1_tmc_unify_param_i
...
[1.1.x] Unify "I" parameter for M906,M912 etc.
2018-07-12 22:31:26 -05:00
8f110190eb
Add Z_CLEARANCE_MULTI_PROBE to example configs
2018-07-12 22:27:06 -05:00
54adf6f52d
Shorter Z up move between multiple probing attempts
...
For some probes like micro switches the full Z clearance raise between
probing attempts is not required while bigger Z clearance between probe
points is still needed to avoid clamps. The shorter Z raise within
multiprobing same point significantly increase probing speed and the whole
auto level process.
2018-07-12 22:27:06 -05:00
3b5c81b84a
[1.1.x] Validate that X/Y_PROBE_OFFSET_FROM_EXTRUDER are integers ( #11255 )
2018-07-12 21:22:59 -05:00
d8331d97d6
Unify M91x parameter I meaning, simplify reports
2018-07-11 20:31:40 -05:00
5cddfce0ee
Endstops::report_state => event_handler
2018-07-11 19:47:25 -05:00
5f587126b9
Loosen static assertion guarding overflow in SCAN_THERMISTOR_TABLE ( #11240 )
...
Bisect search merged in #10882 actually works fine for thermistor
tables with up to 255 entries with no overflow, due to C++ integer
promotion rules.
Closes issue #11220 .
2018-07-11 16:42:23 -05:00
39b3e4c501
Support for multiple Max7219 units in a chain ( #11226 )
...
* Support for multiple Max7219 units in a chain
I'll move this support over to bugfix_2.0.0 in the next few days. And
then look at updating the Max7219_idle() routine to make use of multiple
units in a chain.
* spelling correction
2018-07-08 17:35:58 -05:00
fae2929b6b
Resolve issue where user can't edit mesh
2018-07-08 14:39:08 -05:00
ccb225f43a
Float maths updates for 2.0.x parity ( #11213 )
...
Co-Authored-By: ejtagle <ejtagle@hotmail.com >
2018-07-06 21:44:33 -05:00
fc9f4ce2c0
Fix missing quote in language list
...
Co-Authored-By: p3p <p3p@p3psoft.co.uk >
2018-07-04 13:40:18 -05:00
a69cc6c5ba
Fix Trigorilla include typo
2018-07-03 20:22:36 -05:00
03a704600c
No M914 or SGT set for non-sensorless axes ( #11197 )
2018-07-03 20:10:43 -05:00
e84341412c
Merge pull request #11194 from Schullebernd/bugfix-1.1.x
...
[1.1.x] Tronxy X3A configurations and thermistor
2018-07-03 19:05:51 -05:00
fae20983eb
Add configurations for Tronxy X3A
2018-07-03 18:14:46 -05:00
559e935785
Bring default Configuration.h up to date
2018-07-03 18:10:55 -05:00
432da42dba
Add thermistor 501 (100K Zonestar)
2018-07-03 18:10:55 -05:00
0702c78e62
Fix and improve POWER_LOSS_RECOVERY ( #11186 )
2018-07-02 23:21:18 -05:00
84187dca5c
Add "Marlin Dev Mode" option
2018-07-02 22:53:01 -05:00
b7c648db32
Minor patches for POWER_LOSS_RECOVERY
2018-07-02 17:25:15 -05:00
a83f7f1d25
Turn off DISABLE_INACTIVE_EXTRUDER with SWITCHING_NOZZLE
...
Fix #11183
2018-07-02 17:25:15 -05:00
5700360adf
[1.1.x] Slovak translation update ( #11174 )
2018-07-01 23:15:14 -05:00
defaa93121
Do a hard kill for failed homing moves ( #11160 )
2018-06-30 21:53:58 -05:00
c4fbbcaf46
Lose the old HOMEAXIS macro
2018-06-30 18:07:40 -05:00
ca6ddbc555
Detect endstop hits in any direction
2018-06-30 17:26:49 -05:00
1caa01a9a2
Fix Trigorilla 1.4 pin defines
...
See #11097
2018-06-30 13:45:41 -05:00
a294ec3836
Add delta feedrate scaling ( #11152 )
2018-06-30 13:44:37 -05:00
a789ab4005
[1.1.x] Git ignore for VS ( #11156 )
...
Add missing VS file
2018-06-30 02:51:20 -05:00
718a22e836
Non-conflicting CS pins for MKS Gen L
2018-06-30 02:35:45 -05:00
be3e006fc8
Fix G33 compile warning
2018-06-29 23:20:59 -05:00
654f0bed25
Remove JUNCTION_DEVIATION_INCLUDE_E option ( #11146 )
2018-06-29 22:41:56 -05:00
Scott Lahteine
Scott Lahteine
Giuliano
Roxy-3D
kaimimue
nightgryphon
Clifford Roche
Aaron Griffith
Marcel Schulz
Roman Moravčík