focus on affective changes

test this change to see if it breaks anything
Merge 'bugfix-2.1.x' into pr/27480
2024-10-19 14:30:44 -05:00 · 2024-10-19 14:13:53 -05:00 · 2024-10-19 06:01:58 -05:00 · 2024-10-19 04:55:04 -05:00 · 2024-10-17 00:27:08 +00:00 · 2024-10-16 16:23:57 -05:00
913 changed files with 35203 additions and 17643 deletions
@@ -7,7 +7,7 @@ contact_links:
    url: https://www.facebook.com/groups/1049718498464482
    about: Please ask and answer questions here.
  - name: 🕹 Marlin on Discord
-    url: https://discord.gg/n5NJ59y
+    url: https://discord.com/servers/marlin-firmware-461605380783472640
    about: Join the Discord server for support and discussion.
  - name: 🔗 Marlin Discussion Forum
    url: https://reprap.org/forum/list.php?415
@@ -43,7 +43,7 @@ We have a Message Board and a Facebook group where our knowledgable user communi

 If chat is more your speed, you can join the MarlinFirmware Discord server:

-* Use the link https://discord.gg/n5NJ59y to join up as a General User.
+* Use the link https://discord.com/servers/marlin-firmware-461605380783472640 to join up as a General User.
 * Even though our Discord is pretty active, it may take a while for community members to respond &mdash; please be patient!
 * Use the `#general` channel for general questions or discussion about Marlin.
 * Other channels exist for certain topics or are limited to Patrons. Check the channel list.
@@ -14,6 +14,8 @@ on:
    - config/**
    - data/**
    - docs/**
+    - test/**
+    - Marlin/tests/**
    - '**/*.md'
  push:
    branches:
@@ -23,6 +25,8 @@ on:
    - config/**
    - data/**
    - docs/**
+    - test/**
+    - Marlin/tests/**
    - '**/*.md'

 jobs:
@@ -33,11 +37,13 @@ jobs:
    runs-on: ubuntu-latest

    strategy:
+      fail-fast: true
      matrix:
        test-platform:

        # Native
        - linux_native
+        - simulator_linux_release

        # AVR
        - mega2560
@@ -100,9 +106,9 @@ jobs:

        # STM32F4
        - ARMED
-        - BIGTREE_BTT002
-        - BIGTREE_GTR_V1_0
-        - BIGTREE_SKR_PRO
+        - BTT_BTT002
+        - BTT_GTR_V1_0
+        - BTT_SKR_PRO
        - FLYF407ZG
        - FYSETC_S6
        - LERDGEK
@@ -177,6 +183,13 @@ jobs:
        pio upgrade --dev
        pio pkg update --global

+    - name: Install Simulator dependencies
+      run: |
+        sudo apt-get install build-essential
+        sudo apt-get install libsdl2-dev
+        sudo apt-get install libsdl2-net-dev
+        sudo apt-get install libglm-dev
+
    - name: Run ${{ matrix.test-platform }} Tests
      run: |
        make tests-single-ci TEST_TARGET=${{ matrix.test-platform }}
@@ -0,0 +1,48 @@
+#
+# ci-validate-boards.yml
+# Validate boards.h to make sure it's all set up correctly
+#
+
+name: CI - Validate boards.h
+
+# We can do the on: section as two items, one for pull requests and one for pushes...
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+  push:
+    branches:
+    - bugfix-2.1.x
+    paths:
+    - 'Marlin/src/core/boards.h'
+
+jobs:
+  validate_pins_files:
+    name: Validate boards.h
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Validate core/boards.h
+      run: |
+        make validate-boards -j
@@ -0,0 +1,51 @@
+#
+# ci-validate-pins.yml
+# Validate that all of the pins files are unchanged by pinsformat.py
+#
+
+name: CI - Validate Pins Files
+
+on:
+  pull_request:
+    branches:
+    - bugfix-2.1.x
+    # Cannot be enabled on 2.1.x until it contains the unit test framework
+    #- 2.1.x
+    paths:
+    - 'Marlin/src/pins/*/**'
+  push:
+    branches:
+    - bugfix-2.1.x
+    # Cannot be enabled on 2.1.x until it contains the unit test framework
+    #- 2.1.x
+    paths:
+    - 'Marlin/src/pins/*/**'
+
+jobs:
+  validate_pins_files:
+    name: Validate Pins Files
+    if: github.repository == 'MarlinFirmware/Marlin'
+
+    runs-on: ubuntu-latest
+
+    steps:
+    - name: Check out the PR
+      uses: actions/checkout@v4
+
+    - name: Cache pip
+      uses: actions/cache@v4
+      with:
+        path: ~/.cache/pip
+        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
+        restore-keys: |
+          ${{ runner.os }}-pip-
+
+    - name: Select Python 3.9
+      uses: actions/setup-python@v5
+      with:
+        python-version: '3.9'
+        architecture: 'x64'
+
+    - name: Validate all pins files
+      run: |
+        make validate-pins -j
@@ -125,6 +125,7 @@ vc-fileutils.settings
 # Visual Studio Code
 .vscode/*
 !.vscode/extensions.json
+*.code-workspace

 # Simulation files
 imgui.ini
@@ -0,0 +1,16 @@
+/**
+ * Marlin-specific settings for Zed
+ *
+ * For a full list of overridable settings, and general information on folder-specific settings,
+ * see the documentation: https://zed.dev/docs/configuring-zed#settings-files
+ */
+{
+  "languages": {
+    "C": {
+      "enable_language_server": false
+    },
+    "C++": {
+      "enable_language_server": false
+    }
+  }
+}
@@ -2,22 +2,24 @@ SCRIPTS_DIR := buildroot/share/scripts
 CONTAINER_RT_BIN := docker
 CONTAINER_RT_OPTS := --rm -v $(PWD):/code -v platformio-cache:/root/.platformio
 CONTAINER_IMAGE := marlin-dev
+UNIT_TEST_CONFIG ?= default

 help:
 	@echo "Tasks for local development:"
-	@echo "make marlin                    : Build marlin for the configured board"
-	@echo "make format-pins               : Reformat all pins files"
+	@echo "make marlin                    : Build Marlin for the configured board"
+	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
+	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
+	@echo "make validate-boards -j        : Validate boards.h and pins.h for standards compliance"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
 	@echo "make tests-all-local           : Run all tests locally"
 	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
-#	@echo "make unit-test-single-ci      : Run a single code test from inside the CI"
-#	@echo "make unit-test-single-local   : Run a single code test locally"
-#	@echo "make unit-test-single-local-docker : Run a single code test locally, using docker-compose"
+	@echo "make unit-test-single-local    : Run unit tests for a single config locally"
+	@echo "make unit-test-single-local-docker : Run unit tests for a single config locally, using docker"
 	@echo "make unit-test-all-local      : Run all code tests locally"
-	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker-compose"
-	@echo "make setup-local-docker        : Setup local docker-compose"
+	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker"
+	@echo "make setup-local-docker        : Setup local docker using buildx"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -27,6 +29,9 @@ help:
 	@echo "                       run on GitHub CI"
 	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
 	@echo "                       the index of the test (1-based)"
+	@echo "  UNIT_TEST_CONFIG     Set the name of the config from the test folder, without"
+	@echo "                       the leading number. Default is 'default'". Used with the
+	@echo "                       unit-test-single-* tasks"
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
@@ -51,27 +56,29 @@ tests-single-local-docker:
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"

 tests-all-local:
+	@python -c "import yaml" 2>/dev/null || (echo 'pyyaml module is not installed. Install it with "python -m pip install pyyaml"' && exit 1)
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
+	  && for TEST_TARGET in $$(python $(SCRIPTS_DIR)/get_test_targets.py) ; do \
+	    if [ "$$TEST_TARGET" = "linux_native" ] && [ "$$(uname)" = "Darwin" ]; then \
+	      echo "Skipping tests for $$TEST_TARGET on macOS" ; \
+	      continue ; \
+	    fi ; \
+	    echo "Running tests for $$TEST_TARGET" ; \
+	    run_tests . $$TEST_TARGET || exit 1 ; \
+	    sleep 5; \
+	  done

 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)

-#unit-test-single-ci:
-#	export GIT_RESET_HARD=true
-#	$(MAKE) unit-test-single-local TEST_TARGET=$(TEST_TARGET)
+unit-test-single-local:
+	platformio run -t marlin_$(UNIT_TEST_CONFIG) -e linux_native_test

-# TODO: How can we limit tests with ONLY_TEST with platformio?
-#unit-test-single-local:
-#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local" ; return 1; fi
-#	platformio run -t marlin_$(TEST_TARGET)
-
-#unit-test-single-local-docker:
-#	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make unit-test-all-local-docker" ; return 1; fi
-#	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-#	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local TEST_TARGET=$(TEST_TARGET) ONLY_TEST="$(ONLY_TEST)"
+unit-test-single-local-docker:
+	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local UNIT_TEST_CONFIG=$(UNIT_TEST_CONFIG)

 unit-test-all-local:
 	platformio run -t test-marlin -e linux_native_test
@@ -85,7 +92,22 @@ setup-local-docker:

 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')

+.PHONY: $(PINS) format-pins validate-pins
+
 $(PINS): %:
-	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@
+	@echo "Formatting $@"
+	@python $(SCRIPTS_DIR)/pinsformat.py $< $@

 format-pins: $(PINS)
+
+validate-pins: format-pins
+	@echo "Validating pins files"
+	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)
+
+BOARDS_FILE := Marlin/src/core/boards.h
+
+.PHONY: validate-boards
+
+validate-boards:
+	@echo "Validating boards.h file"
+	@python $(SCRIPTS_DIR)/validate_boards.py $(BOARDS_FILE) || (echo "\nError: boards.h file is not valid. Please check and correct it.\n" && exit 1)
@@ -50,7 +50,7 @@
 *
 * Calibration Guides:  https://reprap.org/wiki/Calibration
 *                      https://reprap.org/wiki/Triffid_Hunter%27s_Calibration_Guide
- *                      https://web.archive.org/web/20220907014303/https://sites.google.com/site/repraplogphase/calibration-of-your-reprap
+ *                      https://web.archive.org/web/20220907014303/sites.google.com/site/repraplogphase/calibration-of-your-reprap
 *                      https://youtu.be/wAL9d7FgInk
 *                      https://teachingtechyt.github.io/calibration.html
 *
@@ -61,7 +61,7 @@
 // @section info

 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Original author or contributor.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)

 // @section machine
@@ -77,7 +77,7 @@
 * Serial port -1 is the USB emulated serial port, if available.
 * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
 *
- * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
 */
 #define SERIAL_PORT 0

@@ -99,19 +99,29 @@
 /**
 * Select a secondary serial port on the board to use for communication with the host.
 * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
- * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
 */
 //#define SERIAL_PORT_2 -1
 //#define BAUDRATE_2 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE

 /**
 * Select a third serial port on the board to use for communication with the host.
- * Currently only supported for AVR, DUE, LPC1768/9 and STM32/STM32F1
- * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
+ * Currently supported for AVR, DUE, SAMD51, LPC1768/9, STM32/STM32F1/HC32, and Teensy 4.x
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
 */
 //#define SERIAL_PORT_3 1
 //#define BAUDRATE_3 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE

+/**
+ * Select a serial port to communicate with RS485 protocol
+ * :[-1, 0, 1, 2, 3, 4, 5, 6, 7, 8, 9]
+ */
+//#define RS485_SERIAL_PORT 1
+#ifdef RS485_SERIAL_PORT
+  //#define M485_PROTOCOL 1   // Check your host for protocol compatibility
+  //#define RS485_BUS_BUFFER_SIZE 128
+#endif
+
 // Enable the Bluetooth serial interface on AT90USB devices
 //#define BLUETOOTH

@@ -375,14 +385,15 @@
 *   PRUSA_MMU1           : Průša MMU1 (The "multiplexer" version)
 *   PRUSA_MMU2           : Průša MMU2
 *   PRUSA_MMU2S          : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
+ *   PRUSA_MMU3           : Průša MMU3  (Requires MK3S extruder with motion sensor and MMU firmware version 3.x.x, EXTRUDERS = 5)
 *   EXTENDABLE_EMU_MMU2  : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
 *   EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
 *
 * Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
 * See additional options in Configuration_adv.h.
- * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
+ * :["PRUSA_MMU1", "PRUSA_MMU2", "PRUSA_MMU2S", "PRUSA_MMU3", "EXTENDABLE_EMU_MMU2", "EXTENDABLE_EMU_MMU2S"]
 */
-//#define MMU_MODEL PRUSA_MMU2
+//#define MMU_MODEL PRUSA_MMU3

 // @section psu control

@@ -672,7 +683,7 @@
 * MPCTEMP : Predictive Model temperature control. (~1.8K without auto-tune)
 */
 #define PIDTEMP           // See the PID Tuning Guide at https://reprap.org/wiki/PID_Tuning
-//#define MPCTEMP         // ** EXPERIMENTAL ** See https://marlinfw.org/docs/features/model_predictive_control.html
+//#define MPCTEMP         // See https://marlinfw.org/docs/features/model_predictive_control.html

 #define PID_MAX  255      // Limit hotend current while PID is active (see PID_FUNCTIONAL_RANGE below); 255=full current
 #define PID_K1     0.95   // Smoothing factor within any PID loop
@@ -703,10 +714,13 @@
 * Use a physical model of the hotend to control temperature. When configured correctly this gives
 * better responsiveness and stability than PID and removes the need for PID_EXTRUSION_SCALING
 * and PID_FAN_SCALING. Enable MPC_AUTOTUNE and use M306 T to autotune the model.
- * @section mpctemp
+ * @section mpc temp
 */
 #if ENABLED(MPCTEMP)
  #define MPC_AUTOTUNE                                // Include a method to do MPC auto-tuning (~6.3K bytes of flash)
+  #if ENABLED(MPC_AUTOTUNE)
+    //#define MPC_AUTOTUNE_DEBUG                      // Enable MPC debug logging (~870 bytes of flash)
+  #endif
  //#define MPC_EDIT_MENU                             // Add MPC editing to the "Advanced Settings" menu. (~1.3K bytes of flash)
  //#define MPC_AUTOTUNE_MENU                         // Add MPC auto-tuning to the "Advanced Settings" menu. (~350 bytes of flash)

@@ -788,6 +802,40 @@
  //#define BED_LIMIT_SWITCHING   // Keep the bed temperature within BED_HYSTERESIS of the target
 #endif

+/**
+ * Peltier Bed - Heating and Cooling
+ *
+ * A Peltier device transfers heat from one side to the other in proportion to the amount of
+ * current flowing through the device and the direction of current flow. So the same device
+ * can both heat and cool.
+ *
+ * When "cooling" in addition to rejecting the heat transferred from the hot side to the cold
+ * side, the dissipated power (voltage * current) must also be rejected. Be sure to set up a
+ * fan that can be powered in sync with the Peltier unit.
+ *
+ * This feature is only set up to run in bang-bang mode because Peltiers don't handle PWM
+ * well without filter circuitry.
+ *
+ * Since existing 3D printers are made to handle relatively high current for the heated bed,
+ * we can use the heated bed power pins to control the Peltier power using the same G-codes
+ * as the heated bed (M140, M190, etc.).
+ *
+ * A second GPIO pin is required to control current direction.
+ * Two configurations are possible: Relay and H-Bridge
+ *
+ * (At this time only relay is supported. H-bridge requires 4 MOS switches configured in H-Bridge.)
+ *
+ * Power is handled by the bang-bang control loop: 0 or 255.
+ * Cooling applications are more common than heating, so the pin states are commonly:
+ *   LOW  = Heating = Relay Energized
+ *   HIGH = Cooling = Relay in "Normal" state
+ */
+//#define PELTIER_BED
+#if ENABLED(PELTIER_BED)
+  #define PELTIER_DIR_PIN           -1  // Relay control pin for Peltier
+  #define PELTIER_DIR_HEAT_STATE   LOW  // The relay pin state that causes the Peltier to heat
+#endif
+
 // Add 'M190 R T' for more gradual M190 R bed cooling.
 //#define BED_ANNEALING_GCODE

@@ -828,14 +876,16 @@
  // Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
  // and placed inside the small Creality printer enclosure tent.
  //
-  #define DEFAULT_chamberKp 37.04
-  #define DEFAULT_chamberKi 1.40
+  #define DEFAULT_chamberKp  37.04
+  #define DEFAULT_chamberKi   1.40
  #define DEFAULT_chamberKd 655.17
  // M309 P37.04 I1.04 D655.17

  // FIND YOUR OWN: "M303 E-2 C8 S50" to run autotune on the chamber at 50 degreesC for 8 cycles.
 #endif // PIDTEMPCHAMBER

+// @section pid temp
+
 #if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
  //#define PID_OPENLOOP          // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
  //#define SLOW_PWM_HEATERS      // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
@@ -1454,7 +1504,8 @@
 * A lightweight, solenoid-driven probe.
 * For information about this sensor https://github.com/bigtreetech/MicroProbe
 *
- * Also requires: PROBE_ENABLE_DISABLE
+ * Also requires PROBE_ENABLE_DISABLE
+ * With FT_MOTION requires ENDSTOP_INTERRUPTS_FEATURE
 */
 //#define BIQU_MICROPROBE_V1  // Triggers HIGH
 //#define BIQU_MICROPROBE_V2  // Triggers LOW
@@ -1593,7 +1644,8 @@
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
 #define PROBING_MARGIN 10

-// X and Y axis travel speed (mm/min) between probes
+// X and Y axis travel speed (mm/min) between probes.
+// Leave undefined to use the average of the current XY homing feedrate.
 #define XY_PROBE_FEEDRATE (133*60)

 // Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
@@ -1624,6 +1676,7 @@
  #define PROBE_TARE_DELAY 200    // (ms) Delay after tare before
  #define PROBE_TARE_STATE HIGH   // State to write pin for tare
  //#define PROBE_TARE_PIN PA5    // Override default pin
+  //#define PROBE_TARE_MENU       // Display a menu item to tare the probe
  #if ENABLED(PROBE_ACTIVATION_SWITCH)
    //#define PROBE_TARE_ONLY_WHILE_INACTIVE  // Fail to tare/probe if PROBE_ACTIVATION_SWITCH is active
  #endif
@@ -1661,8 +1714,8 @@
 * probe Z Offset set with NOZZLE_TO_PROBE_OFFSET, M851, or the LCD.
 * Only integer values >= 1 are valid here.
 *
- * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
- *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
+ * Example: 'M851 Z-5' with a CLEARANCE of 4  =>  9mm from bed to nozzle.
+ *     But: 'M851 Z+1' with a CLEARANCE of 2  =>  2mm from bed to nozzle.
 */
 #define Z_CLEARANCE_DEPLOY_PROBE   10 // (mm) Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // (mm) Z Clearance between probe points
@@ -1713,6 +1766,8 @@
  #define PROBING_BED_TEMP     50
 #endif

+// @section stepper drivers
+
 // For Inverting Stepper Enable Pins (Active Low) use 0, Non Inverting (Active High) use 1
 // :{ 0:'Low', 1:'High' }
 #define X_ENABLE_ON 0
@@ -1886,6 +1941,8 @@
 #endif

 /**
+ * @section filament runout sensors
+ *
 * Filament Runout Sensors
 * Mechanical or opto endstops are used to check for the presence of filament.
 *
@@ -2218,7 +2275,7 @@
 #if ENABLED(LCD_BED_TRAMMING)
  #define BED_TRAMMING_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
  #define BED_TRAMMING_HEIGHT      0.0        // (mm) Z height of nozzle at tramming points
-  #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z height of nozzle between tramming points
+  #define BED_TRAMMING_Z_HOP       4.0        // (mm) Z raise between tramming points
  //#define BED_TRAMMING_INCLUDE_CENTER       // Move to the center after the last corner
  //#define BED_TRAMMING_USE_PROBE
  #if ENABLED(BED_TRAMMING_USE_PROBE)
@@ -2282,6 +2339,9 @@
 // Homing speeds (linear=mm/min, rotational=°/min)
 #define HOMING_FEEDRATE_MM_M { (50*60), (50*60), (4*60) }

+// Edit homing feedrates with M210 and MarlinUI menu items
+//#define EDITABLE_HOMING_FEEDRATE
+
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS

@@ -2408,9 +2468,9 @@
 #define PREHEAT_2_TEMP_CHAMBER 35
 #define PREHEAT_2_FAN_SPEED     0 // Value from 0 to 255

-// @section motion
-
 /**
+ * @section nozzle park
+ *
 * Nozzle Park
 *
 * Park the nozzle at the given XYZ position on idle or G27.
@@ -2433,6 +2493,8 @@
 #endif

 /**
+ * @section nozzle clean
+ *
 * Clean Nozzle Feature
 *
 * Adds the G12 command to perform a nozzle cleaning process.
@@ -2593,9 +2655,24 @@
  //#include "Configuration_Secure.h"       // External file with PASSWORD_DEFAULT_VALUE
 #endif

-//=============================================================================
-//============================= LCD and SD support ============================
-//=============================================================================
+// @section media
+
+/**
+ * SD CARD
+ *
+ * SD Card support is disabled by default. If your controller has an SD slot,
+ * you must uncomment the following option or it won't work.
+ */
+//#define SDSUPPORT
+
+/**
+ * SD CARD: ENABLE CRC
+ *
+ * Use CRC checks and retries on the SD communication.
+ */
+#if ENABLED(SDSUPPORT)
+  //#define SD_CHECK_AND_RETRY
+#endif

 // @section interface

@@ -2642,21 +2719,6 @@
 */
 #define LCD_INFO_SCREEN_STYLE 0

-/**
- * SD CARD
- *
- * SD Card support is disabled by default. If your controller has an SD slot,
- * you must uncomment the following option or it won't work.
- */
-//#define SDSUPPORT
-
-/**
- * SD CARD: ENABLE CRC
- *
- * Use CRC checks and retries on the SD communication.
- */
-//#define SD_CHECK_AND_RETRY
-
 /**
 * LCD Menu Items
 *
@@ -2785,7 +2847,7 @@

 //
 // Original RADDS LCD Display+Encoder+SDCardReader
-// https://web.archive.org/web/20200719145306/http://doku.radds.org/dokumentation/lcd-display/
+// https://web.archive.org/web/20200719145306/doku.radds.org/dokumentation/lcd-display/
 //
 //#define RADDS_DISPLAY

@@ -2851,7 +2913,7 @@

 //
 // Elefu RA Board Control Panel
-// https://web.archive.org/web/20140823033947/http://www.elefu.com/index.php?route=product/product&product_id=53
+// https://web.archive.org/web/20140823033947/www.elefu.com/index.php?route=product/product&product_id=53
 //
 //#define RA_CONTROL_PANEL

@@ -2983,7 +3045,7 @@

 //
 // Cartesio UI
-// https://web.archive.org/web/20180605050442/http://mauk.cc/webshop/cartesio-shop/electronics/user-interface
+// https://web.archive.org/web/20180605050442/mauk.cc/webshop/cartesio-shop/electronics/user-interface
 //
 //#define CARTESIO_UI

@@ -3220,6 +3282,11 @@
 //
 //#define ANYCUBIC_LCD_VYPER

+//
+// Sovol SV-06 Resistive Touch Screen
+//
+//#define SOVOL_SV06_RTS
+
 //
 // 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028
 //
@@ -3415,7 +3482,9 @@
  #define BUTTON_DELAY_EDIT      50 // (ms) Button repeat delay for edit screens
  #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus

-  //#define DISABLE_ENCODER         // Disable the click encoder, if any
+  #if ANY(TFT_CLASSIC_UI, TFT_COLOR_UI)
+    //#define NO_BACK_MENU_ITEM     // Don't display a top menu item to go back to the parent menu
+  #endif

  #define TOUCH_SCREEN_CALIBRATION

@@ -47,8 +47,9 @@
 *  2 = config.ini - File format for PlatformIO preprocessing.
 *  3 = schema.json - The entire configuration schema. (13 = pattern groups)
 *  4 = schema.yml - The entire configuration schema.
+ *  5 = Config.h - Minimal configuration by popular demand.
 */
-//#define CONFIG_EXPORT 2 // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml']
+//#define CONFIG_EXPORT 105 // :[1:'JSON', 2:'config.ini', 3:'schema.json', 4:'schema.yml', 5:'Config.h']

 //===========================================================================
 //============================= Thermal Settings ============================
@@ -202,7 +203,7 @@
 //
 #if DISABLED(PIDTEMPBED)
  #define BED_CHECK_INTERVAL 5000   // (ms) Interval between checks in bang-bang control
-  #if ENABLED(BED_LIMIT_SWITCHING)
+  #if ANY(BED_LIMIT_SWITCHING, PELTIER_BED)
    #define BED_HYSTERESIS 2        // (°C) Only set the relevant heater state when ABS(T-target) > BED_HYSTERESIS
  #endif
 #endif
@@ -303,9 +304,9 @@
 * If you get false positives for "Thermal Runaway", increase
 * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
 */
-#if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
-  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)
+#if ALL(HAS_HOTEND, THERMAL_PROTECTION_HOTENDS)
+  #define THERMAL_PROTECTION_PERIOD        40 // (seconds)
+  #define THERMAL_PROTECTION_HYSTERESIS     4 // (°C)

  //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
  #if ENABLED(ADAPTIVE_FAN_SLOWING)
@@ -334,7 +335,7 @@
 /**
 * Thermal Protection parameters for the bed are just as above for hotends.
 */
-#if ENABLED(THERMAL_PROTECTION_BED)
+#if TEMP_SENSOR_BED && ENABLED(THERMAL_PROTECTION_BED)
  #define THERMAL_PROTECTION_BED_PERIOD        20 // (seconds)
  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // (°C)

@@ -348,7 +349,7 @@
 /**
 * Thermal Protection parameters for the heated chamber.
 */
-#if ENABLED(THERMAL_PROTECTION_CHAMBER)
+#if TEMP_SENSOR_CHAMBER && ENABLED(THERMAL_PROTECTION_CHAMBER)
  #define THERMAL_PROTECTION_CHAMBER_PERIOD    20 // (seconds)
  #define THERMAL_PROTECTION_CHAMBER_HYSTERESIS 2 // (°C)

@@ -362,7 +363,7 @@
 /**
 * Thermal Protection parameters for the laser cooler.
 */
-#if ENABLED(THERMAL_PROTECTION_COOLER)
+#if TEMP_SENSOR_COOLER && ENABLED(THERMAL_PROTECTION_COOLER)
  #define THERMAL_PROTECTION_COOLER_PERIOD     10 // (seconds)
  #define THERMAL_PROTECTION_COOLER_HYSTERESIS  3 // (°C)

@@ -590,6 +591,8 @@
  // Use TEMP_SENSOR_SOC as a trigger for enabling the controller fan
  //#define CONTROLLER_FAN_MIN_SOC_TEMP 40  // (°C) Turn on the fan if the SoC reaches this temperature

+  #define CONTROLLER_FAN_BED_HEATING        // Turn on the fan when heating the bed
+
  //#define CONTROLLER_FAN_EDITABLE         // Enable M710 configurable settings
  #if ENABLED(CONTROLLER_FAN_EDITABLE)
    #define CONTROLLER_FAN_MENU             // Enable the Controller Fan submenu
@@ -604,6 +607,8 @@
 */
 //#define FAN_KICKSTART_TIME  100  // (ms)
 //#define FAN_KICKSTART_POWER 180  // 64-255
+//#define FAN_KICKSTART_LINEAR     // Set kickstart time linearly based on the speed, e.g., for 20% (51) it will be FAN_KICKSTART_TIME * 0.2.
+                                   // Useful for quick speed up to low speed. Kickstart power must be set to 255.

 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1
@@ -1079,9 +1084,11 @@
  #define HOME_AFTER_G34
 #endif

-//
-// Add the G35 command to read bed corners to help adjust screws. Requires a bed probe.
-//
+/**
+ * Assisted Tramming
+ *
+ * Add the G35 command to measure bed corners and help adjust screws. Requires a bed probe.
+ */
 //#define ASSISTED_TRAMMING
 #if ENABLED(ASSISTED_TRAMMING)

@@ -1102,29 +1109,35 @@
  //#define ASSISTED_TRAMMING_WAIT_POSITION { X_CENTER, Y_CENTER, 30 } // Move the nozzle out of the way for adjustment

  /**
-   * Screw thread:
-   *   M3: 30 = Clockwise, 31 = Counter-Clockwise
-   *   M4: 40 = Clockwise, 41 = Counter-Clockwise
-   *   M5: 50 = Clockwise, 51 = Counter-Clockwise
+   * Screw Thread. Use one of the following defines:
+   *
+   *   M3_CW = M3 Clockwise, M3_CCW = M3 Counter-Clockwise
+   *   M4_CW = M4 Clockwise, M4_CCW = M4 Counter-Clockwise
+   *   M5_CW = M5 Clockwise, M5_CCW = M5 Counter-Clockwise
+   *
+   * :{'M3_CW':'M3 Clockwise','M3_CCW':'M3 Counter-Clockwise','M4_CW':'M4 Clockwise','M4_CCW':'M4 Counter-Clockwise','M5_CW':'M5 Clockwise','M5_CCW':'M5 Counter-Clockwise'}
   */
-  #define TRAMMING_SCREW_THREAD 30
+  #define TRAMMING_SCREW_THREAD M3_CW

 #endif

 // @section motion control

 /**
- * Fixed-time-based Motion Control -- EXPERIMENTAL
+ * Fixed-time-based Motion Control -- BETA FEATURE
 * Enable/disable and set parameters with G-code M493.
+ * See ft_types.h for named values used by FTM options.
 */
 //#define FT_MOTION
 #if ENABLED(FT_MOTION)
-  #define FTM_DEFAULT_MODE        ftMotionMode_DISABLED // Default mode of fixed time control. (Enums in ft_types.h)
-  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (Enums in ft_types.h)
-  #define FTM_SHAPING_DEFAULT_X_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
-  #define FTM_SHAPING_DEFAULT_Y_FREQ   37.0f      // (Hz) Default peak frequency used by input shapers
+  //#define FTM_IS_DEFAULT_MOTION                 // Use FT Motion as the factory default?
+  #define FTM_DEFAULT_DYNFREQ_MODE dynFreqMode_DISABLED // Default mode of dynamic frequency calculation. (DISABLED, Z_BASED, MASS_BASED)
+  #define FTM_DEFAULT_SHAPER_X      ftMotionShaper_NONE // Default shaper mode on X axis (NONE, ZV, ZVD, ZVDD, ZVDDD, EI, 2HEI, 3HEI, MZV)
+  #define FTM_DEFAULT_SHAPER_Y      ftMotionShaper_NONE // Default shaper mode on Y axis
+  #define FTM_SHAPING_DEFAULT_FREQ_X   37.0f      // (Hz) Default peak frequency used by input shapers
+  #define FTM_SHAPING_DEFAULT_FREQ_Y   37.0f      // (Hz) Default peak frequency used by input shapers
  #define FTM_LINEAR_ADV_DEFAULT_ENA   false      // Default linear advance enable (true) or disable (false)
-  #define FTM_LINEAR_ADV_DEFAULT_K      0.0f      // Default linear advance gain
+  #define FTM_LINEAR_ADV_DEFAULT_K      0.0f      // Default linear advance gain. (Acceleration-based scaling factor.)
  #define FTM_SHAPING_ZETA_X            0.1f      // Zeta used by input shapers for X axis
  #define FTM_SHAPING_ZETA_Y            0.1f      // Zeta used by input shapers for Y axis

@@ -1147,18 +1160,13 @@
  #define FTM_FS                     1000         // (Hz) Frequency for trajectory generation. (Reciprocal of FTM_TS)
  #define FTM_TS                        0.001f    // (s) Time step for trajectory generation. (Reciprocal of FTM_FS)

-  // These values may be configured to adjust the duration of loop().
-  #define FTM_STEPS_PER_LOOP           60         // Number of stepper commands to generate each loop()
-  #define FTM_POINTS_PER_LOOP         100         // Number of trajectory points to generate each loop()
-
  #if DISABLED(COREXY)
    #define FTM_STEPPER_FS          20000         // (Hz) Frequency for stepper I/O update

    // Use this to adjust the time required to consume the command buffer.
    // Try increasing this value if stepper motion is choppy.
    #define FTM_STEPPERCMD_BUFF_SIZE 3000         // Size of the stepper command buffers
-                                                  // (FTM_STEPS_PER_LOOP * FTM_POINTS_PER_LOOP) is a good start
-                                                  // If you run out of memory, fall back to 3000 and increase progressively
+
  #else
    // CoreXY motion needs a larger buffer size. These values are based on our testing.
    #define FTM_STEPPER_FS          30000
@@ -1180,29 +1188,24 @@
 #endif

 /**
- * Input Shaping -- EXPERIMENTAL
+ * Input Shaping
 *
 * Zero Vibration (ZV) Input Shaping for X and/or Y movements.
 *
 * This option uses a lot of SRAM for the step buffer. The buffer size is
- * calculated automatically from SHAPING_FREQ_[XY], DEFAULT_AXIS_STEPS_PER_UNIT,
+ * calculated automatically from SHAPING_FREQ_[XYZ], DEFAULT_AXIS_STEPS_PER_UNIT,
 * DEFAULT_MAX_FEEDRATE and ADAPTIVE_STEP_SMOOTHING. The default calculation can
 * be overridden by setting SHAPING_MIN_FREQ and/or SHAPING_MAX_FEEDRATE.
 * The higher the frequency and the lower the feedrate, the smaller the buffer.
 * If the buffer is too small at runtime, input shaping will have reduced
 * effectiveness during high speed movements.
 *
- * Tune with M593 D<factor> F<frequency>:
- *
- *  D<factor>    Set the zeta/damping factor. If axes (X, Y, etc.) are not specified, set for all axes.
- *  F<frequency> Set the frequency. If axes (X, Y, etc.) are not specified, set for all axes.
- *  T[map]       Input Shaping type, 0:ZV, 1:EI, 2:2H EI (not implemented yet)
- *  X<1>         Set the given parameters only for the X axis.
- *  Y<1>         Set the given parameters only for the Y axis.
+ * Tune with M593 D<factor> F<frequency>
 */
 //#define INPUT_SHAPING_X
 //#define INPUT_SHAPING_Y
-#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
+//#define INPUT_SHAPING_Z
+#if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y, INPUT_SHAPING_Z)
  #if ENABLED(INPUT_SHAPING_X)
    #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
    #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
@@ -1211,6 +1214,10 @@
    #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
    #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
  #endif
+  #if ENABLED(INPUT_SHAPING_Z)
+    #define SHAPING_FREQ_Z  40.0        // (Hz) The default dominant resonant frequency on the Z axis.
+    #define SHAPING_ZETA_Z   0.15       // Damping ratio of the Z axis (range: 0.0 = no damping to 1.0 = critical damping).
+  #endif
  //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
  //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
  //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.
@@ -1332,8 +1339,6 @@
  //#define CALIBRATION_SCRIPT_PRE  "M117 Starting Auto-Calibration\nT0\nG28\nG12\nM117 Calibrating..."
  //#define CALIBRATION_SCRIPT_POST "M500\nM117 Calibration data saved"

-  #define CALIBRATION_MEASUREMENT_RESOLUTION     0.01 // mm
-
  #define CALIBRATION_FEEDRATE_SLOW             60    // mm/min
  #define CALIBRATION_FEEDRATE_FAST           1200    // mm/min
  #define CALIBRATION_FEEDRATE_TRAVEL         3000    // mm/min
@@ -1492,8 +1497,17 @@
  #define FEEDRATE_CHANGE_BEEP_FREQUENCY 440
 #endif

+/**
+ * Probe Offset Wizard
+ * Add a Probe Z Offset calibration option to the LCD menu.
+ * Use this helper to get a perfect 'M851 Z' probe offset.
+ * When launched this powerful wizard:
+ *  - Measures the bed height at the configured position with the probe.
+ *  - Moves the nozzle to the same position for a "paper" measurement.
+ *  - The difference is used to set the probe Z offset.
+ */
 #if HAS_BED_PROBE && ANY(HAS_MARLINUI_MENU, HAS_TFT_LVGL_UI)
-  //#define PROBE_OFFSET_WIZARD       // Add a Probe Z Offset calibration option to the LCD menu
+  //#define PROBE_OFFSET_WIZARD
  #if ENABLED(PROBE_OFFSET_WIZARD)
    /**
     * Enable to init the Probe Z-Offset when starting the Wizard.
@@ -1510,6 +1524,10 @@
 #if HAS_MARLINUI_MENU

  #if HAS_BED_PROBE
+
+    // Show Deploy / Stow Probe options in the Motion menu.
+    #define PROBE_DEPLOY_STOW_MENU
+
    // Add calibration in the Probe Offsets menu to compensate for X-axis twist.
    //#define X_AXIS_TWIST_COMPENSATION
    #if ENABLED(X_AXIS_TWIST_COMPENSATION)
@@ -1524,8 +1542,6 @@
      #define XATC_Z_OFFSETS { 0, 0, 0 }    // Z offsets for X axis sample points
    #endif

-    // Show Deploy / Stow Probe options in the Motion menu.
-    #define PROBE_DEPLOY_STOW_MENU
  #endif

  // Include a page of printer information in the LCD Main Menu
@@ -1556,6 +1572,9 @@
  // BACK menu items keep the highlight at the top
  //#define TURBO_BACK_MENU_ITEM

+  // BACK menu items show "Back" instead of the previous menu name
+  //#define GENERIC_BACK_MENU_ITEM
+
  // Insert a menu for preheating at the top level to allow for quick access
  //#define PREHEAT_SHORTCUT_MENU_ITEM

@@ -1584,7 +1603,7 @@
    #if HAS_MARLINUI_U8GLIB
      //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
    #endif
-    #if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
+    #if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE, HAS_MARLINUI_HD44780)
      //#define SHOW_CUSTOM_BOOTSCREEN    // Show the bitmap in Marlin/_Bootscreen.h on startup.
    #endif
  #endif
@@ -2330,6 +2349,7 @@
 *
 * Control extrusion rate based on instantaneous extruder velocity. Can be used to correct for
 * underextrusion at high extruder speeds that are otherwise well-behaved (i.e., not skipping).
+ * For better results also enable ADAPTIVE_STEP_SMOOTHING.
 */
 //#define NONLINEAR_EXTRUSION

@@ -2557,27 +2577,28 @@
 //#define MINIMUM_STEPPER_PRE_DIR_DELAY 650

 /**
- * Minimum stepper driver pulse width (in µs)
- *   0 : Smallest possible width the MCU can produce, compatible with TMC2xxx drivers
- *   0 : Minimum 500ns for LV8729, adjusted in stepper.h
- *   1 : Minimum for A4988 and A5984 stepper drivers
- *   2 : Minimum for DRV8825 stepper drivers
- *   3 : Minimum for TB6600 stepper drivers
- *  30 : Minimum for TB6560 stepper drivers
+ * Minimum stepper driver pulse width (in ns)
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
+ *     100 : Minimum for TMC2xxx stepper drivers
+ *     500 : Minimum for LV8729
+ *    1000 : Minimum for A4988 and A5984 stepper drivers
+ *    2000 : Minimum for DRV8825 stepper drivers
+ *    3000 : Minimum for TB6600 stepper drivers
+ *   30000 : Minimum for TB6560 stepper drivers
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
-//#define MINIMUM_STEPPER_PULSE 2
+//#define MINIMUM_STEPPER_PULSE_NS 2000

 /**
 * Maximum stepping rate (in Hz) the stepper driver allows
- *  If undefined, defaults to 1MHz / (2 * MINIMUM_STEPPER_PULSE)
+ * If undefined, these defaults (from Conditionals-4-adv.h) apply:
 *  5000000 : Maximum for TMC2xxx stepper drivers
 *  1000000 : Maximum for LV8729 stepper driver
- *  500000  : Maximum for A4988 stepper driver
- *  250000  : Maximum for DRV8825 stepper driver
- *  150000  : Maximum for TB6600 stepper driver
- *   15000  : Maximum for TB6560 stepper driver
+ *   500000 : Maximum for A4988 stepper driver
+ *   250000 : Maximum for DRV8825 stepper driver
+ *   150000 : Maximum for TB6600 stepper driver
+ *    15000 : Maximum for TB6560 stepper driver
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
@@ -2705,7 +2726,7 @@

 /**
 * Set the number of proportional font spaces required to fill up a typical character space.
- * This can help to better align the output of commands like `G29 O` Mesh Output.
+ * This can help to better align the output of commands like 'G29 O' Mesh Output.
 *
 * For clients that use a fixed-width font (like OctoPrint), leave this set to 1.0.
 * Otherwise, adjust according to your client and font.
@@ -2970,7 +2991,7 @@

  #if AXIS_IS_TMC_CONFIG(X)
    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
-    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
+    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for homing. (Typically lower than *_CURRENT.)
    #define X_MICROSTEPS     16        // 0..256
    #define X_RSENSE          0.11
    #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
@@ -3180,6 +3201,13 @@
    //#define E7_HOLD_MULTIPLIER 0.5
  #endif

+  /**
+   * Use the homing current for all probing. (e.g., Current may be reduced to the
+   * point where a collision makes the motor skip instead of damaging the bed,
+   * though this is unlikely to save delicate probes from being damaged.
+   */
+  //#define PROBING_USE_CURRENT_HOME
+
  // @section tmc/spi

  /**
@@ -3444,7 +3472,7 @@
  /**
   * Step on both rising and falling edge signals (as with a square wave).
   */
-  //#define EDGE_STEPPING
+  #define EDGE_STEPPING

  /**
   * Enable M122 debugging command for TMC stepper drivers.
@@ -3526,7 +3554,7 @@
  //#define PHOTOGRAPH_PIN 23

  // Canon Hack Development Kit
-  // https://web.archive.org/web/20200920094805/https://captain-slow.dk/2014/03/09/3d-printing-timelapses/
+  // https://web.archive.org/web/20200920094805/captain-slow.dk/2014/03/09/3d-printing-timelapses/
  //#define CHDK_PIN        4

  // Optional second move with delay to trigger the camera shutter
@@ -4261,7 +4289,8 @@

 /**
 * Instant freeze / unfreeze functionality
- * Potentially useful for emergency stop that allows being resumed.
+ * Potentially useful for rapid stop that allows being resumed. Halts stepper movement.
+ * Note this does NOT pause spindles, lasers, fans, heaters or any other auxiliary device.
 * @section interface
 */
 //#define FREEZE_FEATURE
@@ -4378,58 +4407,81 @@
  //#define E_MUX0_PIN 40  // Always Required
  //#define E_MUX1_PIN 42  // Needed for 3 to 8 inputs
  //#define E_MUX2_PIN 44  // Needed for 5 to 8 inputs
-#elif HAS_PRUSA_MMU2
-  // Serial port used for communication with MMU2.
-  #define MMU2_SERIAL_PORT 2

-  // Use hardware reset for MMU if a pin is defined for it
-  //#define MMU2_RST_PIN 23
+#elif HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3
+  // Common settings for MMU2/MMU2S/MMU3
+  // Serial port used for communication with MMU2/MMU2S/MMU3.
+  #define MMU_SERIAL_PORT 2
+  #define MMU_BAUD 115200

-  // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
-  //#define MMU2_MODE_12V
+  //#define MMU_RST_PIN 23    // Define this pin to use Hardware Reset for MMU2/MMU2S/MMU3

-  // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
-  #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
+  //#define MMU_MENUS         // Add an LCD menu for MMU2/MMU2S/MMU3

-  // Add an LCD menu for MMU2
-  //#define MMU2_MENUS
+  //#define MMU_DEBUG         // Write debug info to serial output

-  // Settings for filament load / unload from the LCD menu.
-  // This is for Průša MK3-style extruders. Customize for your hardware.
-  #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
-  #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
-    {  7.2, 1145 }, \
-    { 14.4,  871 }, \
-    { 36.0, 1393 }, \
-    { 14.4,  871 }, \
-    { 50.0,  198 }
+  // Options pertaining to MMU2 and MMU2S
+  #if HAS_PRUSA_MMU2
+    // Enable if the MMU2 has 12V stepper motors (MMU2 Firmware 1.0.2 and up)
+    //#define MMU2_MODE_12V

-  #define MMU2_RAMMING_SEQUENCE \
-    {   1.0, 1000 }, \
-    {   1.0, 1500 }, \
-    {   2.0, 2000 }, \
-    {   1.5, 3000 }, \
-    {   2.5, 4000 }, \
-    { -15.0, 5000 }, \
-    { -14.0, 1200 }, \
-    {  -6.0,  600 }, \
-    {  10.0,  700 }, \
-    { -10.0,  400 }, \
-    { -50.0, 2000 }
+    // Settings for filament load / unload from the LCD menu.
+    // This is for Průša MK3-style extruders. Customize for your hardware.
+    #define MMU2_FILAMENTCHANGE_EJECT_FEED 80.0
+
+    // G-code to execute when MMU2 F.I.N.D.A. probe detects filament runout
+    #define MMU2_FILAMENT_RUNOUT_SCRIPT "M600"
+
+    // MMU2 sequences use mm/min. Not compatible with MMU3, which use mm/sec.
+    #define MMU2_LOAD_TO_NOZZLE_SEQUENCE \
+      {  4.4,  871 }, \
+      { 10.0, 1393 }, \
+      {  4.4,  871 }, \
+      { 10.0,  198 }
+
+    #define MMU2_RAMMING_SEQUENCE \
+      {   1.0, 1000 }, \
+      {   1.0, 1500 }, \
+      {   2.0, 2000 }, \
+      {   1.5, 3000 }, \
+      {   2.5, 4000 }, \
+      { -15.0, 5000 }, \
+      { -14.0, 1200 }, \
+      {  -6.0,  600 }, \
+      {  10.0,  700 }, \
+      { -10.0,  400 }, \
+      { -50.0, 2000 }
+
+  #endif // HAS_PRUSA_MMU2

  /**
-   * Using a sensor like the MMU2S
-   * This mode requires a MK3S extruder with a sensor at the extruder idler, like the MMU2S.
+   * Options pertaining to MMU2S devices
+   * Requires the MK3S extruder with a sensor at the extruder idler, like the MMU2S.
   * See https://help.prusa3d.com/guide/3b-mk3s-mk2-5s-extruder-upgrade_41560#42048, step 11
   */
  #if HAS_PRUSA_MMU2S
    #define MMU2_C0_RETRY   5             // Number of retries (total time = timeout*retries)

+    /**
+     * This is called after the filament runout sensor is triggered to check if
+     * the filament has been loaded properly by moving the filament back and
+     * forth to see if the filament runout sensor is going to get triggered
+     * again, which should not occur if the filament is properly loaded.
+     *
+     * Thus, the MMU2_CAN_LOAD_SEQUENCE should contain some forward and
+     * backward moves. The forward moves should be greater than the backward
+     * moves.
+     *
+     * This is useless if your filament runout sensor is way behind the gears.
+     * In that case use {0, MMU2_CAN_LOAD_FEEDRATE}
+     *
+     * Adjust MMU2_CAN_LOAD_SEQUENCE according to your setup.
+     */
    #define MMU2_CAN_LOAD_FEEDRATE 800    // (mm/min)
    #define MMU2_CAN_LOAD_SEQUENCE \
-      {  0.1, MMU2_CAN_LOAD_FEEDRATE }, \
-      {  60.0, MMU2_CAN_LOAD_FEEDRATE }, \
-      { -52.0, MMU2_CAN_LOAD_FEEDRATE }
+      {   5.0, MMU2_CAN_LOAD_FEEDRATE }, \
+      {  15.0, MMU2_CAN_LOAD_FEEDRATE }, \
+      { -10.0, MMU2_CAN_LOAD_FEEDRATE }

    #define MMU2_CAN_LOAD_RETRACT   6.0   // (mm) Keep under the distance between Load Sequence values
    #define MMU2_CAN_LOAD_DEVIATION 0.8   // (mm) Acceptable deviation
@@ -4440,10 +4492,90 @@

    // Continue unloading if sensor detects filament after the initial unload move
    //#define MMU_IR_UNLOAD_MOVE
-  #else
+
+  #elif HAS_PRUSA_MMU3
+
+    // MMU3 settings
+
+    #define MMU3_HAS_CUTTER     // Enable cutter related functionality
+
+    #define MMU3_MAX_RETRIES 3  // Number of retries (total time = timeout*retries)
+
+    // As discussed with our PrusaSlicer profile specialist
+    // - ToolChange shall not try to push filament into the very tip of the nozzle
+    // to have some space for additional G-code to tune the extruded filament length
+    // in the profile
+    // Beware - this value is used to initialize the MMU logic layer - it will be sent to the MMU upon line up (written into its 8bit register 0x0b)
+    // However - in the G-code we can get a request to set the extra load distance at runtime to something else (M708 A0xb Xsomething).
+    // The printer intercepts such a call and sets its extra load distance to match the new value as well.
+    #define MMU3_FILAMENT_SENSOR_E_POSITION  0   // (mm)
+    #define _MMU3_LOAD_DISTANCE_PAST_GEARS   5   // (mm)
+    #define MMU3_TOOL_CHANGE_LOAD_LENGTH (MMU3_FILAMENT_SENSOR_E_POSITION + _MMU3_LOAD_DISTANCE_PAST_GEARS) // (mm)
+
+    #define MMU3_LOAD_TO_NOZZLE_FEED_RATE        20.0 // (mm/s)
+
+    #define MMU3_VERIFY_LOAD_TO_NOZZLE_FEED_RATE 50.0 // (mm/s)
+    #define _MMU3_VERIFY_LOAD_TO_NOZZLE_TWEAK    -5.0 // (mm) Amount to adjust the length for verifying load-to-nozzle
+
+    // The first thing the MMU does is initialize its axis.
+    // Meanwhile the E-motor will unload 20mm of filament in about 1 second.
+    #define MMU3_RETRY_UNLOAD_TO_FINDA_LENGTH    80.0 // (mm)
+    #define MMU3_RETRY_UNLOAD_TO_FINDA_FEED_RATE 80.0 // (mm/s)
+
+    // After loading a new filament, the printer will extrude this length of filament
+    // then retract to the original position. This is used to check if the filament sensor
+    // reading flickers or filament is jammed.
+    #define _MMU_EXTRUDER_PTFE_LENGTH            42.3 // (mm)
+    #define _MMU_EXTRUDER_HEATBREAK_LENGTH       17.7 // (mm)
+    #define MMU3_CHECK_FILAMENT_PRESENCE_EXTRUSION_LENGTH (MMU3_FILAMENT_SENSOR_E_POSITION + _MMU_EXTRUDER_PTFE_LENGTH + _MMU_EXTRUDER_HEATBREAK_LENGTH + _MMU3_VERIFY_LOAD_TO_NOZZLE_TWEAK) // (mm)

    /**
-     * MMU1 Extruder Sensor
+     * SpoolJoin Consumes All Filament -- EXPERIMENTAL
+     *
+     * SpoolJoin normally triggers when FINDA sensor untriggers while printing.
+     * This is the default behaviour and it doesn't consume all the filament
+     * before triggering a filament change. This leaves some filament in the
+     * current slot and before switching to the next slot it is unloaded.
+     *
+     * Enabling this option will trigger the filament change when both FINDA
+     * and Filament Runout Sensor triggers during the print and it allows the
+     * filament in the current slot to be completely consumed before doing the
+     * filament change. But this can cause problems as a little bit of filament
+     * will be left between the extruder gears (thinking that the filament
+     * sensor is triggered through the gears) and the end of the PTFE tube and
+     * can cause filament load issues.
+     */
+    //#define MMU3_SPOOL_JOIN_CONSUMES_ALL_FILAMENT
+
+    // MMU3 sequences use mm/sec. Not compatible with MMU2 which use mm/min.
+    #define MMU3_LOAD_TO_NOZZLE_SEQUENCE \
+      { _MMU_EXTRUDER_PTFE_LENGTH,      MMM_TO_MMS(810) }, /* (13.5 mm/s) Fast load ahead of heatbreak */ \
+      { _MMU_EXTRUDER_HEATBREAK_LENGTH, MMM_TO_MMS(198) }  /* ( 3.3 mm/s) Slow load after heatbreak */
+
+    #define MMU3_RAMMING_SEQUENCE \
+      { 0.2816,  MMM_TO_MMS(1339.0) }, \
+      { 0.3051,  MMM_TO_MMS(1451.0) }, \
+      { 0.3453,  MMM_TO_MMS(1642.0) }, \
+      { 0.3990,  MMM_TO_MMS(1897.0) }, \
+      { 0.4761,  MMM_TO_MMS(2264.0) }, \
+      { 0.5767,  MMM_TO_MMS(2742.0) }, \
+      { 0.5691,  MMM_TO_MMS(3220.0) }, \
+      { 0.1081,  MMM_TO_MMS(3220.0) }, \
+      { 0.7644,  MMM_TO_MMS(3635.0) }, \
+      { 0.8248,  MMM_TO_MMS(3921.0) }, \
+      { 0.8483,  MMM_TO_MMS(4033.0) }, \
+      { -15.0,   MMM_TO_MMS(6000.0) }, \
+      { -24.5,   MMM_TO_MMS(1200.0) }, \
+      {  -7.0,   MMM_TO_MMS( 600.0) }, \
+      {  -3.5,   MMM_TO_MMS( 360.0) }, \
+      {  20.0,   MMM_TO_MMS( 454.0) }, \
+      { -20.0,   MMM_TO_MMS( 303.0) }, \
+      { -35.0,   MMM_TO_MMS(2000.0) }
+
+  #else // MMU2 (not MMU2S)
+
+    /**
+     * MMU2 Extruder Sensor
     *
     * Support for a Průša (or other) IR Sensor to detect filament near the extruder
     * and make loading more reliable. Suitable for an extruder equipped with a filament
@@ -4453,16 +4585,14 @@
     * move up to the gears. If no filament is detected, the MMU2 can make some more attempts.
     * If all attempts fail, a filament runout will be triggered.
     */
-    //#define MMU_EXTRUDER_SENSOR
-    #if ENABLED(MMU_EXTRUDER_SENSOR)
-      #define MMU_LOADING_ATTEMPTS_NR 5 // max. number of attempts to load filament if first load fail
+    //#define MMU2_EXTRUDER_SENSOR
+    #if ENABLED(MMU2_EXTRUDER_SENSOR)
+      #define MMU2_LOADING_ATTEMPTS_NR 5  // Number of times to try loading filament before failure
    #endif

  #endif

-  //#define MMU2_DEBUG  // Write debug info to serial output
-
-#endif // HAS_PRUSA_MMU2
+#endif // HAS_PRUSA_MMU2 || HAS_PRUSA_MMU3

 /**
 * Advanced Print Counter settings
@@ -187,6 +187,17 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1033)
 # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
 else ifeq ($(HARDWARE_MOTHERBOARD),1034)

+# RAMPS 1.6+ (Power outputs: Hotend, Fan, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1035)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Bed)
+else ifeq ($(HARDWARE_MOTHERBOARD),1036)
+# RAMPS 1.6+ (Power outputs: Hotend, Fan0, Fan1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1037)
+# RAMPS 1.6+ (Power outputs: Hotend0, Hotend1, Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1038)
+# RAMPS 1.6+ (Power outputs: Spindle, Controller Fan)
+else ifeq ($(HARDWARE_MOTHERBOARD),1039)
+
 #
 # RAMPS Derivatives - ATmega1280, ATmega2560
 #
@@ -221,108 +232,113 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1112)
 else ifeq ($(HARDWARE_MOTHERBOARD),1113)
 # BigTreeTech or BIQU KFB2.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1114)
-# zrib V2.0 (Chinese RAMPS replica)
+# Zonestar zrib V2.0 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1115)
-# zrib V5.2 (Chinese RAMPS replica)
+# Zonestar zrib V5.2 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1116)
-# Felix 2.0+ Electronics Board (RAMPS like)
+# Zonestar zrib V5.3 (Chinese RAMPS replica)
 else ifeq ($(HARDWARE_MOTHERBOARD),1117)
-# Invent-A-Part RigidBoard
+# Felix 2.0+ Electronics Board (RAMPS like)
 else ifeq ($(HARDWARE_MOTHERBOARD),1118)
-# Invent-A-Part RigidBoard V2
+# Invent-A-Part RigidBoard
 else ifeq ($(HARDWARE_MOTHERBOARD),1119)
-# Sainsmart 2-in-1 board
+# Invent-A-Part RigidBoard V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1120)
-# Ultimaker
+# Sainsmart 2-in-1 board
 else ifeq ($(HARDWARE_MOTHERBOARD),1121)
-# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+# Ultimaker
 else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+# Ultimaker (Older electronics. Pre 1.5.4. This is rare)
+else ifeq ($(HARDWARE_MOTHERBOARD),1123)
  MCU              ?= atmega1280
  PROG_MCU         ?= m1280
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
+# Azteeg X3 Pro
 else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Rumba
+# Ultimainboard 2.x (Uses TEMP_SENSOR 20)
 else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Raise3D N series Rumba derivative
+# Rumba
 else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
+# Raise3D N series Rumba derivative
 else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot T-Rex 2 Plus
+# Rapide Lite 200 (v1, low-cost RUMBA clone with drv)
 else ifeq ($(HARDWARE_MOTHERBOARD),1129)
-# Formbot T-Rex 3
+# Formbot T-Rex 2 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1130)
-# Formbot Raptor
+# Formbot T-Rex 3
 else ifeq ($(HARDWARE_MOTHERBOARD),1131)
-# Formbot Raptor 2
+# Formbot Raptor
 else ifeq ($(HARDWARE_MOTHERBOARD),1132)
-# bq ZUM Mega 3D
+# Formbot Raptor 2
 else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# MakeBoard Mini v2.1.2 by MicroMake
+# bq ZUM Mega 3D
 else ifeq ($(HARDWARE_MOTHERBOARD),1134)
-# TriGorilla Anycubic version 1.3-based on RAMPS EFB
+# MakeBoard Mini v2.1.2 by MicroMake
 else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-#   ... Ver 1.4
+# TriGorilla Anycubic version 1.3-based on RAMPS EFB
 else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-#   ... Rev 1.1 (new servo pin order)
+#   ... Ver 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# Creality: Ender-4, CR-8
+#   ... Rev 1.1 (new servo pin order)
 else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# Creality: CR10S, CR20, CR-X
+# Creality: Ender-4, CR-8
 else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# Dagoma F5
+# Creality: CR10S, CR20, CR-X
 else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# FYSETC F6 1.3
+# Dagoma F5
 else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# FYSETC F6 1.4
+# Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)
 else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Wanhao Duplicator i3 Plus
+# FYSETC F6 1.3
 else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# VORON Design
+# FYSETC F6 1.4
 else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Tronxy TRONXY-V3-1.0
+# Wanhao Duplicator i3 Plus
 else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# Z-Bolt X Series
+# VORON Design
 else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# TT OSCAR
+# Tronxy TRONXY-V3-1.0
 else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# Overlord/Overlord Pro
+# Z-Bolt X Series
 else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# ADIMLab Gantry v1
+# TT OSCAR
 else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1151)
+else ifeq ($(HARDWARE_MOTHERBOARD),1150)
 # MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1152)
+else ifeq ($(HARDWARE_MOTHERBOARD),1151)
 # MKS GEN L V2.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1153)
+else ifeq ($(HARDWARE_MOTHERBOARD),1152)
 # Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1154)
+else ifeq ($(HARDWARE_MOTHERBOARD),1153)
 # Ortur 4
-else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+else ifeq ($(HARDWARE_MOTHERBOARD),1154)
 # Tenlog D3 Hero IDEX printer
+else ifeq ($(HARDWARE_MOTHERBOARD),1155)
+# Tenlog D3, D5, D6 IDEX Printer
 else ifeq ($(HARDWARE_MOTHERBOARD),1156)
-# Tenlog D3,5,6 Pro IDEX printers
-else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1158)
+else ifeq ($(HARDWARE_MOTHERBOARD),1157)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend0, Hotend1, Hotend2, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1159)
+else ifeq ($(HARDWARE_MOTHERBOARD),1158)
 # Ramps S 1.2 by Sakul.cz (Power outputs: Hotend, Fan0, Fan1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1160)
+else ifeq ($(HARDWARE_MOTHERBOARD),1159)
 # Longer LK1 PRO / Alfawise U20 Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1161)
+else ifeq ($(HARDWARE_MOTHERBOARD),1160)
 # Longer LKx PRO / Alfawise Uxx Pro (PRO version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1162)
-# Zonestar zrib V5.3 (Chinese RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+else ifeq ($(HARDWARE_MOTHERBOARD),1161)
 # Pxmalion Core I3
+else ifeq ($(HARDWARE_MOTHERBOARD),1162)
+# Panowin Cutlass (as found in the Panowin F1)
+else ifeq ($(HARDWARE_MOTHERBOARD),1163)
+# Kodama Bardo V1.x (as found in the Kodama Trinus)
 else ifeq ($(HARDWARE_MOTHERBOARD),1164)
+# XTLW MFF V1.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1165)
+# XTLW MFF V2.0
+else ifeq ($(HARDWARE_MOTHERBOARD),1166)
+

 #
 # RAMBo and derivatives
@@ -340,7 +356,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
 else ifeq ($(HARDWARE_MOTHERBOARD),1204)
 # abee Scoovo X9H
 else ifeq ($(HARDWARE_MOTHERBOARD),1205)
-# Rambo ThinkerV2
+# ThinkerV2
 else ifeq ($(HARDWARE_MOTHERBOARD),1206)

 #
@@ -383,30 +399,40 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1315)
 else ifeq ($(HARDWARE_MOTHERBOARD),1316)
 # Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A10(M/T/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
 # Geeetech GT2560 Rev B for Mecreator2
+else ifeq ($(HARDWARE_MOTHERBOARD),1318)
+# Geeetech GT2560 Rev B for A20(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Geeetech GT2560 Rev B for A20(M/T/D)
+# Geeetech GT2560 Rev B for A10(M/T/D)
 else ifeq ($(HARDWARE_MOTHERBOARD),1320)
-# Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1321)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1322)
-# Leapfrog Xeed 2015
-else ifeq ($(HARDWARE_MOTHERBOARD),1323)
-# PICA Shield (original version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1324)
-# PICA Shield (rev C or later)
-else ifeq ($(HARDWARE_MOTHERBOARD),1325)
-# Intamsys 4.0 (Funmat HT)
-else ifeq ($(HARDWARE_MOTHERBOARD),1326)
-# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
-else ifeq ($(HARDWARE_MOTHERBOARD),1327)
 # Geeetech GT2560 Rev B for A20(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1321)
+# Einstart retrofit
+else ifeq ($(HARDWARE_MOTHERBOARD),1322)
+# Wanhao 0ne+ i3 Mini
+else ifeq ($(HARDWARE_MOTHERBOARD),1323)
+# Overlord/Overlord Pro
+else ifeq ($(HARDWARE_MOTHERBOARD),1324)
+# ADIMLab Gantry v1
+else ifeq ($(HARDWARE_MOTHERBOARD),1325)
+# ADIMLab Gantry v2
+else ifeq ($(HARDWARE_MOTHERBOARD),1326)
+# Leapfrog Xeed 2015
+else ifeq ($(HARDWARE_MOTHERBOARD),1327)
+# PICA Shield (original version)
 else ifeq ($(HARDWARE_MOTHERBOARD),1328)
-# Mega controller & Protoneer CNC Shield V3.00
+# PICA Shield (rev C or later)
 else ifeq ($(HARDWARE_MOTHERBOARD),1329)
+# Intamsys 4.0 (Funmat HT)
+else ifeq ($(HARDWARE_MOTHERBOARD),1330)
+# Malyan M180 Mainboard Version 2 (no display function, direct G-code only)
+else ifeq ($(HARDWARE_MOTHERBOARD),1331)
+# Mega controller & Protoneer CNC Shield V3.00
+else ifeq ($(HARDWARE_MOTHERBOARD),1332)
+# WEEDO 62A board (TINA2, Monoprice Cadet, etc.)
+else ifeq ($(HARDWARE_MOTHERBOARD),1333)
+# Geeetech GT2560 V4.1B for A10(M/T/D)
+else ifeq ($(HARDWARE_MOTHERBOARD),1334)

 #
 # ATmega1281, ATmega2561
@@ -440,7 +466,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1502)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega644p
  PROG_MCU         ?= m644p
-# Melzi V2.0
+# Melzi V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1503)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
@@ -450,36 +476,41 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1504)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Creality3D board (for CR-10 etc)
+# Melzi Creality3D (for CR-10 etc)
 else ifeq ($(HARDWARE_MOTHERBOARD),1505)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Melzi Malyan M150 board
+# Melzi Creality3D (for Ender-2)
 else ifeq ($(HARDWARE_MOTHERBOARD),1506)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Tronxy X5S
+# Melzi Malyan M150
 else ifeq ($(HARDWARE_MOTHERBOARD),1507)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# STB V1.1
+# Tronxy X5S
 else ifeq ($(HARDWARE_MOTHERBOARD),1508)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Azteeg X1
+# STB V1.1
 else ifeq ($(HARDWARE_MOTHERBOARD),1509)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
-# Anet 1.0 (Melzi clone)
+# Azteeg X1
 else ifeq ($(HARDWARE_MOTHERBOARD),1510)
  HARDWARE_VARIANT ?= Sanguino
  MCU              ?= atmega1284p
  PROG_MCU         ?= m1284p
+# Anet 1.0 (Melzi clone)
+else ifeq ($(HARDWARE_MOTHERBOARD),1511)
+  HARDWARE_VARIANT ?= Sanguino
+  MCU              ?= atmega1284p
+  PROG_MCU         ?= m1284p
 # ZoneStar ZMIB V2
 else ifeq ($(HARDWARE_MOTHERBOARD),1511)
  HARDWARE_VARIANT ?= Sanguino
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-04-15"
+//#define STRING_DISTRIBUTION_DATE "2024-10-17"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -129,11 +129,11 @@ typedef Servo hal_servo_t;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if !WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #error "MMU2_SERIAL_PORT must be from 0 to 3"
+#ifdef MMU_SERIAL_PORT
+  #if !WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #error "MMU_SERIAL_PORT must be from 0 to 3"
  #endif
-  #define MMU2_SERIAL mmuSerial
+  #define MMU_SERIAL mmuSerial
 #endif

 #ifdef LCD_SERIAL_PORT
@@ -141,7 +141,7 @@ typedef Servo hal_servo_t;
    #error "LCD_SERIAL_PORT must be from 0 to 3."
  #endif
  #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
  #endif
 #endif
@@ -159,7 +159,7 @@ typedef Servo hal_servo_t;
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

-#define HAL_SENSITIVE_PINS 0, 1,
+#define HAL_SENSITIVE_PINS 0, 1

 #ifdef __AVR_AT90USB1286__
  #define JTAG_DISABLE() do{ MCUCR = 0x80; MCUCR = 0x80; }while(0)
@@ -601,20 +601,20 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);

 #endif // SERIAL_PORT_3

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _RX_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::store_rxd_char();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _RX_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::store_rxd_char();
  }

-  ISR(SERIAL_REGNAME(USART, MMU2_SERIAL_PORT, _UDRE_vect)) {
-    MarlinSerial<MMU2SerialCfg<MMU2_SERIAL_PORT>>::_tx_udr_empty_irq();
+  ISR(SERIAL_REGNAME(USART, MMU_SERIAL_PORT, _UDRE_vect)) {
+    MarlinSerial<MMU2SerialCfg<MMU_SERIAL_PORT>>::_tx_udr_empty_irq();
  }

-  template class MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> >;
+  template class MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> >;
  MSerialMMU2 mmuSerial(MSerialMMU2::HasEmergencyParser);

-#endif // MMU2_SERIAL_PORT
+#endif // MMU_SERIAL_PORT

 #ifdef LCD_SERIAL_PORT

@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
  template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
  MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);

-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    template<typename Cfg>
    typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
      const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.
@@ -205,7 +205,7 @@
    static ring_buffer_pos_t available();
    static void write(const uint8_t c);
    static void flushTX();
-    #if HAS_DGUS_LCD
+    #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
      static ring_buffer_pos_t get_tx_buffer_free();
    #endif

@@ -246,7 +246,7 @@

 #endif // !USBCON

-#ifdef MMU2_SERIAL_PORT
+#ifdef MMU_SERIAL_PORT
  template <uint8_t serial>
  struct MMU2SerialCfg {
    static constexpr int PORT               = serial;
@@ -260,7 +260,7 @@
    static constexpr bool RX_OVERRUNS       = false;
  };

-  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialMMU2;
+  typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU_SERIAL_PORT> > > MSerialMMU2;
  extern MSerialMMU2 mmuSerial;
 #endif

@@ -345,6 +345,14 @@ void setup_endstop_interrupts() {
      pciSetup(Z_MIN_PROBE_PIN);
    #endif
  #endif
+  #if USE_CALIBRATION
+    #if (digitalPinToInterrupt(CALIBRATION_PIN) != NOT_AN_INTERRUPT)
+      _ATTACH(CALIBRATION_PIN);
+    #else
+      static_assert(digitalPinHasPCICR(CALIBRATION_PIN), "CALIBRATION_PIN is not interrupt-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue.");
+      pciSetup(CALIBRATION_PIN);
+    #endif
+  #endif

  // If we arrive here without raising an assertion, each pin has either an EXT-interrupt or a PCI.
 }
@@ -150,7 +150,7 @@ void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
      else {
        if (p == 32 || p == 128) continue;                    // Skip TIMER2 specific prescalers when not TIMER2
        const uint16_t rft = (F_CPU) / (p * f_desired);
-        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=" STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
+        DEBUG_ECHOLNPGM("(Not Timer 2) F_CPU=", STRINGIFY(F_CPU), " prescaler=", p, " f_desired=", f_desired);
        res_fast_temp = rft - 1;
        res_pc_temp = rft / 2;
      }
@@ -28,9 +28,6 @@
 *   Port          : E0 E1 E4 E5 G5 E3 H3 H4 H5 H6 B4 B5 B6 B7 J1 J0 H1 H0 D3 D2 D1 D0 A0 A1 A2 A3 A4 A5 A6 A7 C7 C6 C5 C4 C3 C2 C1 C0 D7 G2 G1 G0 L7 L6 L5 L4 L3 L2 L1 L0 B3 B2 B1 B0 F0 F1 F2 F3 F4 F5 F6 F7 K0 K1 K2 K3 K4 K5 K6 K7 | E2 E6 E7 xx xx H2 H7 G3 G4 xx xx xx xx xx D4 D5 D6 xx xx J2 J3 J4 J5 J6 J7 xx xx xx xx xx
 *   Logical Pin   : 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45 46 47 48 49 50 51 52 53 54 55 56 57 58 59 60 61 62 63 64 65 66 67 68 69 | 78 79 80 xx xx 84 85 71 70 xx xx xx xx xx 81 82 83 xx xx 72 73 75 76 77 74 xx xx xx xx xx
 *   Analog Input  :                                                                                                                                                                    0  1  2  3  4  5  6  7  8  9 10 11 12 13 14 15
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 38 39 40 41 42 43 44 45 16 10 11 12 06 07 08 09 30 31 32 33 34 35 36 37 17 18 19 20 21 22 23 24 00 01 13 05 02 03 14 15 46 47 48 49 50 51 52 53 25 26 27 28 29 04
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7 G0 G1 G2 G3 G4 G5
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 08 09 10 11 12 13 14 15 16 17 18 19 20 21 00 01 02 03 04 05 06 07
 *   Port:        B0 B1 B2 B3 B4 B5 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 #include "../fastio.h"
@@ -26,9 +26,6 @@
 *
 *   Logical Pin: 00 01 02 03 04 05 06 07 08 09 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31
 *   Port:        B0 B1 B2 B3 B4 B5 B6 B7 D0 D1 D2 D3 D4 D5 D6 D7 C0 C1 C2 C3 C4 C5 C6 C7 A7 A6 A5 A4 A3 A2 A1 A0
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
 */

 /**                        ATMega644
@@ -26,10 +26,7 @@
 *
 *   Logical Pin: 28 29 30 31 32 33 34 35 20 21 22 23 24 25 26 27 10 11 12 13 14 15 16 17 00 01 02 03 04 05 06 07 08 09(46*47)36 37 18 19 38 39 40 41 42 43 44 45
 *   Port:        A0 A1 A2 A3 A4 A5 A6 A7 B0 B1 B2 B3 B4 B5 B6 B7 C0 C1 C2 C3 C4 C5 C6 C7 D0 D1 D2 D3 D4 D5 D6 D7 E0 E1 E2 E3 E4 E5 E6 E7 F0 F1 F2 F3 F4 F5 F6 F7
- *            The logical pins 46 and 47 are not supported by Teensyduino, but are supported below as E2 and E3
- *
- * Arduino Pin Layout video: https://youtu.be/rIqeVCX09FA
- * AVR alternate pin function overview video: https://youtu.be/1yd8wuI5Plg
+ *            Logical pins 46-47 aren't supported by Teensyduino, but are supported below as E2 and E3
 */

 #include "../fastio.h"
@@ -42,7 +42,7 @@
  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  #define GET_PINMODE(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))
+  #define getValidPinMode(pin) (*portModeRegister(pin) & digitalPinToBitMask_DEBUG(pin))

 #elif AVR_ATmega2560_FAMILY_PLUS_70   // So we can access/display all the pins on boards using more than 70

@@ -50,32 +50,32 @@
  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer_plus_70(p)
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask_plus_70(p)
  #define digitalPinToPort_DEBUG(p) digitalPinToPort_plus_70(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }

 #else

  #define digitalPinToTimer_DEBUG(p) digitalPinToTimer(p)
  #define digitalPinToBitMask_DEBUG(p) digitalPinToBitMask(p)
  #define digitalPinToPort_DEBUG(p) digitalPinToPort(p)
-  bool GET_PINMODE(int8_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
-  #define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+  bool getValidPinMode(pin_t pin) {return *portModeRegister(digitalPinToPort_DEBUG(pin)) & digitalPinToBitMask_DEBUG(pin); }
+  #define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)

 #endif

-#define VALID_PIN(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
+#define isValidPin(pin) (pin >= 0 && pin < NUM_DIGITAL_PINS ? 1 : 0)
 #if AVR_ATmega1284_FAMILY
-  #define IS_ANALOG(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(IS_ANALOG(P) ? (P) - analogInputToDigitalPin(7) : -1)
+  #define isAnalogPin(P) WITHIN(P, analogInputToDigitalPin(7), analogInputToDigitalPin(0))
+  #define digitalPinToAnalogIndex(P) int(isAnalogPin(P) ? (P) - analogInputToDigitalPin(7) : -1)
 #else
  #define _ANALOG1(P) WITHIN(P, analogInputToDigitalPin(0), analogInputToDigitalPin(7))
  #define _ANALOG2(P) WITHIN(P, analogInputToDigitalPin(8), analogInputToDigitalPin(15))
-  #define IS_ANALOG(P) (_ANALOG1(P) || _ANALOG2(P))
-  #define DIGITAL_PIN_TO_ANALOG_PIN(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
+  #define isAnalogPin(P) (_ANALOG1(P) || _ANALOG2(P))
+  #define digitalPinToAnalogIndex(P) int(_ANALOG1(P) ? (P) - analogInputToDigitalPin(0) : _ANALOG2(P) ? (P) - analogInputToDigitalPin(8) + 8 : -1)
 #endif
-#define GET_ARRAY_PIN(p) pgm_read_byte(&pin_array[p].pin)
+#define getPinByIndex(p) pgm_read_byte(&pin_array[p].pin)
 #define MULTI_NAME_PAD 26 // space needed to be pretty if not first name assigned to a pin

-void PRINT_ARRAY_NAME(uint8_t x) {
+void printPinNameByIndex(uint8_t x) {
  PGM_P const name_mem_pointer = (PGM_P)pgm_read_ptr(&pin_array[x].name);
  for (uint8_t y = 0; y < MAX_NAME_LENGTH; ++y) {
    char temp_char = pgm_read_byte(name_mem_pointer + y);
@@ -88,7 +88,7 @@ void PRINT_ARRAY_NAME(uint8_t x) {
  }
 }

-#define GET_ARRAY_IS_DIGITAL(x)   pgm_read_byte(&pin_array[x].is_digital)
+#define getPinIsDigitalByIndex(x)   pgm_read_byte(&pin_array[x].is_digital)

 #if defined(__AVR_ATmega1284P__)  // 1284 IDE extensions set this to the number of
  #undef NUM_DIGITAL_PINS         // digital only pins while all other CPUs have it
@@ -276,7 +276,7 @@ void timer_prefix(uint8_t T, char L, uint8_t N) {  // T - timer    L - pwm  N -
  if (TEST(*TMSK, TOIE)) err_prob_interrupt();
 }

-void pwm_details(uint8_t pin) {
+void printPinPWM(uint8_t pin) {
  switch (digitalPinToTimer_DEBUG(pin)) {

    #if ABTEST(0)
@@ -347,7 +347,7 @@ void pwm_details(uint8_t pin) {
  #else
    UNUSED(print_is_also_tied);
  #endif
-} // pwm_details
+} // printPinPWM

 #ifndef digitalRead_mod                   // Use Teensyduino's version of digitalRead - it doesn't disable the PWMs
  int digitalRead_mod(const pin_t pin) {  // same as digitalRead except the PWM stop section has been removed
@@ -356,7 +356,7 @@ void pwm_details(uint8_t pin) {
  }
 #endif

-void print_port(const pin_t pin) {   // print port number
+void printPinPort(const pin_t pin) {   // print port number
  #ifdef digitalPinToPort_DEBUG
    uint8_t x;
    SERIAL_ECHOPGM("  Port: ");
@@ -386,7 +386,7 @@ void print_port(const pin_t pin) {   // print port number
  #endif
 }

-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)

 #undef ABTEST
@@ -120,7 +120,7 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  U8G_ATOMIC_END();
 }

-#if ENABLED(FYSETC_MINI_12864)
+#if U8G_SPI_USE_MODE_3
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_0
@@ -143,9 +143,9 @@ uint8_t u8g_com_HAL_AVR_sw_sp_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                         //   SCK idle state needs to be set to the proper idle state before
-                                               //   the next chip select goes active
+      #if U8G_SPI_USE_MODE_3                                  // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                                        // SCK idle state needs to be set to the proper idle state before
+                                                              //  the next chip select goes active
          u8g_com_arduino_digital_write(u8g, U8G_PI_SCK, 1);  // Set SCK to mode 3 idle state before CS goes active
          u8g_com_arduino_digital_write(u8g, U8G_PI_CS, LOW);
        }
@@ -81,11 +81,11 @@ extern DefaultSerial4 MSerial3;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+#ifdef MMU_SERIAL_PORT
+  #if WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3."
+    #error "MMU_SERIAL_PORT must be from 0 to 3."
  #endif
 #endif

@@ -127,7 +127,7 @@ typedef Servo hal_servo_t;
 #define HAL_ADC_RESOLUTION  10

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif

 //
@@ -50,7 +50,7 @@
 static Flags<_Nbr_16timers> DisablePending; // ISR should disable the timer at the next timer reset

 // ------------------------
-/// Interrupt handler for the TC0 channel 1.
+// Interrupt handler for the TC0 channel 1.
 // ------------------------
 void Servo_Handler(const timer16_Sequence_t, Tc*, const uint8_t);

@@ -64,6 +64,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -61,7 +61,7 @@
 #else
  #define G2_PWM_Z 0
 #endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
+#if HAS_MOTOR_CURRENT_PWM_E
  #define G2_PWM_E 1
 #else
  #define G2_PWM_E 0
@@ -68,16 +68,15 @@
 * Usually the hardware SPI pins are only available to the LCD. This makes the DUE hard SPI used at the same time
 * as the TMC2130 soft SPI the most common setup.
 */
-#define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
-
 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
-  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
-      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
-    #endif
-  #elif ENABLED(SOFTWARE_SPI)
+  #define _IS_HW_SPI(P) (defined(TMC_SPI_##P) && (TMC_SPI_##P == SD_MOSI_PIN || TMC_SPI_##P == SD_MISO_PIN || TMC_SPI_##P == SD_SCK_PIN))
+  #if DISABLED(SOFTWARE_SPI) && ENABLED(TMC_USE_SW_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
+  #endif
+  #if ENABLED(SOFTWARE_SPI) && DISABLED(TMC_USE_SW_SPI)
    #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
  #endif
+  #undef _IS_HW_SPI
 #endif

 #if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
@@ -64,19 +64,19 @@
 #define NUMBER_PINS_TOTAL PINS_COUNT

 #define digitalRead_mod(p) extDigitalRead(p)  // AVR digitalRead disabled PWM before it read the pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
-#define VALID_PIN(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
-#define DIGITAL_PIN_TO_ANALOG_PIN(p) int(p - analogInputToDigitalPin(0))
-#define IS_ANALOG(P) WITHIN(P, char(analogInputToDigitalPin(0)), char(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%02d"), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p) pin_array[p].pin
+#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
+#define isValidPin(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
+#define digitalPinToAnalogIndex(p) int(p - analogInputToDigitalPin(0))
+#define isAnalogPin(P) WITHIN(P, pin_t(analogInputToDigitalPin(0)), pin_t(analogInputToDigitalPin(NUM_ANALOG_INPUTS - 1)))
 #define pwm_status(pin) (((g_pinStatus[pin] & 0xF) == PIN_STATUS_PWM) && \
                        ((g_APinDescription[pin].ulPinAttribute & PIN_ATTR_PWM) == PIN_ATTR_PWM))
 #define MULTI_NAME_PAD 14 // space needed to be pretty if not first name assigned to a pin

-bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
  volatile Pio* port = g_APinDescription[pin].pPort;
  uint32_t mask = g_APinDescription[pin].ulPin;
  uint8_t pin_status = g_pinStatus[pin] & 0xF;
@@ -85,14 +85,14 @@ bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
          || pwm_status(pin));
 }

-void pwm_details(int32_t pin) {
+void printPinPWM(int32_t pin) {
  if (pwm_status(pin)) {
    uint32_t chan = g_APinDescription[pin].ulPWMChannel;
    SERIAL_ECHOPGM("PWM = ", PWM_INTERFACE->PWM_CH_NUM[chan].PWM_CDTY);
  }
 }

-void print_port(const pin_t) {}
+void printPinPort(const pin_t) {}

 /**
 * DUE Board pin   |  PORT  | Label
@@ -24,7 +24,7 @@
 /**
 * Define SPI Pins: SCK, MISO, MOSI, SS
 *
- * Available chip select pins for HW SPI are 4 10 52 77
+ * Available chip select pins for HW SPI are 4 10 52 77 87
 */
 #if SDSS == 4 || SDSS == 10 || SDSS == 52 || SDSS == 77 || SDSS == 87
  #if SDSS == 4
@@ -66,7 +66,7 @@

 #include <U8glib-HAL.h>

-#if ENABLED(FYSETC_MINI_12864)
+#if U8G_SPI_USE_MODE_3
  #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_3
 #else
  #define SPISEND_SW_DUE u8g_spiSend_sw_DUE_mode_0
@@ -96,15 +96,15 @@ uint8_t u8g_com_HAL_DUE_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ENABLED(FYSETC_MINI_12864)           // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                        //   SCK idle state needs to be set to the proper idle state before
-                                               //   the next chip select goes active
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);  //set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3                        // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                              // SCK idle state needs to be set to the proper idle state before
+                                                    //  the next chip select goes active
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
          u8g_SetPILevel_DUE(u8g, U8G_PI_CS, LOW);
        }
        else {
          u8g_SetPILevel_DUE(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0); //set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel_DUE(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        u8g_SetPILevel_DUE(u8g, U8G_PI_CS, !arg_val);
@@ -11,7 +11,7 @@ if pioutil.is_pio_build():

    if current_OS == 'Windows':

-        Import("env")
+        env = pioutil.env

        # Use bossac.exe on Windows
        env.Replace(
@@ -18,30 +18,30 @@ extern "C" {
 void sd_mmc_spi_mem_init() {
 }

-Ctrl_status sd_mmc_spi_test_unit_ready() {
-  #ifdef DISABLE_DUE_SD_MMC
-    return CTRL_NO_PRESENT;
-  #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
-  return CTRL_GOOD;
-}
-
-// NOTE: This function is defined as returning the address of the last block
-// in the card, which is cardSize() - 1
-Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
-  *nb_sector = card.diskIODriver()->cardSize() - 1;
-  return CTRL_GOOD;
+inline bool media_ready() {
+  return IS_SD_MOUNTED() && IS_SD_INSERTED() && !IS_SD_FILE_OPEN() && !IS_SD_PRINTING();
 }

 bool sd_mmc_spi_unload(bool) { return true; }

 bool sd_mmc_spi_wr_protect() { return false; }

-bool sd_mmc_spi_removal() {
-  return (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted());
+bool sd_mmc_spi_removal() { return !media_ready(); }
+
+Ctrl_status sd_mmc_spi_test_unit_ready() {
+  #ifdef DISABLE_DUE_SD_MMC
+    return CTRL_NO_PRESENT;
+  #endif
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  return CTRL_GOOD;
+}
+
+// NOTE: This function is defined as returning the address of the last block
+// in the card, which is cardSize() - 1
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;
+  *nb_sector = card.diskIODriver()->cardSize() - 1;
+  return CTRL_GOOD;
 }

 #if ACCESS_USB == true
@@ -61,8 +61,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -101,8 +100,7 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
-    return CTRL_NO_PRESENT;
+  if (sd_mmc_spi_removal()) return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -74,7 +74,7 @@
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
 //!/
-extern void           sd_mmc_spi_mem_init(void);
+void sd_mmc_spi_mem_init();

 //!
 //! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
@@ -87,7 +87,7 @@ extern void           sd_mmc_spi_mem_init(void);
 //!   Media not present    ->    CTRL_NO_PRESENT
 //!   Media has changed    ->    CTRL_BUSY
 //!/
-extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);
+Ctrl_status sd_mmc_spi_test_unit_ready();

 //!
 //! @brief This function gives the address of the last valid sector.
@@ -98,7 +98,7 @@ extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);
 //!   Media ready          ->  CTRL_GOOD
 //!   Media not present    ->  CTRL_NO_PRESENT
 //!/
-extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);
+Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);

 /*! \brief Unload/Load the SD/MMC card selected
 *
@@ -109,7 +109,7 @@ extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);
 *
 * \return \c true if unload/load done success.
 */
-extern bool sd_mmc_spi_unload(bool unload);
+bool sd_mmc_spi_unload(bool unload);

 //!
 //! @brief This function returns the write protected status of the memory.
@@ -120,14 +120,14 @@ extern bool sd_mmc_spi_unload(bool unload);
 //!
 //! @return false  -> the memory is not write-protected (always)
 //!/
-extern bool           sd_mmc_spi_wr_protect(void);
+bool sd_mmc_spi_wr_protect();

 //!
 //! @brief This function tells if the memory has been removed or not.
 //!
 //! @return false  -> The memory isn't removed
 //!
-extern bool           sd_mmc_spi_removal(void);
+bool sd_mmc_spi_removal();

 //---- ACCESS DATA FUNCTIONS ----

@@ -147,7 +147,7 @@ extern bool           sd_mmc_spi_removal(void);
 //!   It is ready    ->    CTRL_GOOD
 //!   A error occur  ->    CTRL_FAIL
 //!
-extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
+Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);

 //! This function initializes the SD/MMC memory for a write operation
 //!
@@ -161,7 +161,7 @@ extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 //!   It is ready    ->    CTRL_GOOD
 //!   An error occurs  ->    CTRL_FAIL
 //!
-extern Ctrl_status    sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
+Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);

 #endif // #if ACCESS_USB == true

@@ -209,16 +209,17 @@ int MarlinHAL::freeMemory() { return ESP.getFreeHeap(); }
 // ADC
 // ------------------------

-#define ADC1_CHANNEL(pin) ADC1_GPIO ## pin ## _CHANNEL
-
+// https://docs.espressif.com/projects/esp-idf/en/release-v4.4/esp32/api-reference/peripherals/adc.html
 adc1_channel_t get_channel(int pin) {
  switch (pin) {
-    case 39: return ADC1_CHANNEL(39);
-    case 36: return ADC1_CHANNEL(36);
-    case 35: return ADC1_CHANNEL(35);
-    case 34: return ADC1_CHANNEL(34);
-    case 33: return ADC1_CHANNEL(33);
-    case 32: return ADC1_CHANNEL(32);
+    case 39: return ADC1_CHANNEL_3;
+    case 36: return ADC1_CHANNEL_0;
+    case 35: return ADC1_CHANNEL_7;
+    case 34: return ADC1_CHANNEL_6;
+    case 33: return ADC1_CHANNEL_5;
+    case 32: return ADC1_CHANNEL_4;
+    case 37: return ADC1_CHANNEL_1;
+    case 38: return ADC1_CHANNEL_2;
  }
  return ADC1_CHANNEL_MAX;
 }
@@ -59,6 +59,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -152,7 +152,7 @@ void stepperTask(void *parameter) {
    xQueueReceive(dma.queue, &dma.current, portMAX_DELAY);
    dma.rw_pos = 0;

-    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.mode);
+    const bool using_ftMotion = TERN0(FT_MOTION, ftMotion.cfg.active);

    while (dma.rw_pos < DMA_SAMPLE_COUNT) {

@@ -90,7 +90,7 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
  config.counter_en  = TIMER_PAUSE;
  config.alarm_en    = TIMER_ALARM_EN;
  config.intr_type   = TIMER_INTR_LEVEL;
-  config.auto_reload = true;
+  config.auto_reload = TIMER_AUTORELOAD_EN;

  // Select and initialize the timer
  timer_init(timer.group, timer.idx, &config);
@@ -53,12 +53,11 @@ typedef uint64_t hal_timer_t;
 #if ENABLED(I2S_STEPPER_STREAM)
  #define STEPPER_TIMER_PRESCALE     1
  #define STEPPER_TIMER_RATE         250000                           // 250khz, 4µs pulses of i2s word clock
-  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
 #else
  #define STEPPER_TIMER_PRESCALE     40
  #define STEPPER_TIMER_RATE         ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
-  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)              // stepper timer ticks per µs
 #endif
+#define STEPPER_TIMER_TICKS_PER_US   ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs

 #define STEP_TIMER_MIN_INTERVAL   8 // minimum time in µs between stepper interrupts

@@ -114,22 +114,19 @@
 // Misc. Functions
 //
 #ifndef analogInputToDigitalPin
-#define analogInputToDigitalPin(p) (p)
+  #define analogInputToDigitalPin(p) pin_t(p)
 #endif

-#define CRITICAL_SECTION_START        \
-  uint32_t primask = __get_PRIMASK(); \
-  (void)__iCliRetVal()
+#define CRITICAL_SECTION_START()        \
+  const bool irqon = !__get_PRIMASK();  \
+  __disable_irq();                      \
+  __DSB();
+#define CRITICAL_SECTION_END()          \
+  __DSB();                              \
+  if (irqon) __enable_irq();

-#define CRITICAL_SECTION_END \
-  if (!primask)              \
-  (void)__iSeiRetVal()
-
-// Disable interrupts
-#define cli() noInterrupts()
-
-// Enable interrupts
-#define sei() interrupts()
+#define cli() __disable_irq()
+#define sei() __enable_irq()

 // bss_end alias
 #define __bss_end __bss_end__
@@ -142,12 +139,31 @@
 // ADC
 //
 #define HAL_ADC_VREF_MV 3300
-#define HAL_ADC_RESOLUTION 10
+#define HAL_ADC_RESOLUTION 12

 #define GET_PIN_MAP_PIN(index) index
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

+//
+// Debug port disable
+// JTMS / SWDIO = PA13
+// JTCK / SWCLK = PA14
+// JTDI         = PA15
+// JTDO         = PB3
+// NJTRST       = PB4
+//
+#define DBG_SWCLK _BV(0)
+#define DBG_SWDIO _BV(1)
+#define DBG_TDO   _BV(2)
+#define DBG_TDI   _BV(3)
+#define DBG_TRST  _BV(4)
+#define DBG_ALL (DBG_SWCLK | DBG_SWDIO | DBG_TDO | DBG_TDI | DBG_TRST)
+
+#define JTAGSWD_RESET() PORT_DebugPortSetting(DBG_ALL, Enable);
+#define JTAG_DISABLE() PORT_DebugPortSetting(DBG_TDO | DBG_TDI | DBG_TRST, Disable);
+#define JTAGSWD_DISABLE() PORT_DebugPortSetting(DBG_ALL, Disable);
+
 //
 // MarlinHAL implementation
 //
@@ -232,7 +232,9 @@ int MarlinHAL::freeMemory() {
  return &top - _sbrk(0);
 }

-void MarlinHAL::adc_init() {}
+void MarlinHAL::adc_init() {
+  analogReadResolution(HAL_ADC_RESOLUTION);
+}

 void MarlinHAL::adc_enable(const pin_t pin) {
  #if TEMP_SENSOR_SOC
@@ -31,8 +31,8 @@

 struct MarlinSerial : public Usart {
  MarlinSerial(
-    struct usart_config_t *usart_device, 
-    gpio_pin_t tx_pin, 
+    struct usart_config_t *usart_device,
+    gpio_pin_t tx_pin,
    gpio_pin_t rx_pin
    #if ENABLED(SERIAL_DMA)
    , M4_DMA_TypeDef *dma_unit = nullptr,
@@ -1,6 +1,6 @@
 /**
 * app_config.h is included by the hc32f460 arduino build script for every source file.
- * it is used to configure the arduino core (and ddl) automatically according 
+ * it is used to configure the arduino core (and ddl) automatically according
 * to the settings in Configuration.h and Configuration_adv.h.
 */
 #pragma once
@@ -44,7 +44,7 @@
 #define DISABLE_SERIAL_GLOBALS 1

 // increase the size of the Usart buffers (both RX and TX)
-// NOTE: 
+// NOTE:
 // the heap usage will increase by (SERIAL_BUFFER_SIZE - 64) * "number of serial ports used"
 // if running out of heap, the system may become unstable
 //#define SERIAL_BUFFER_SIZE 256
@@ -64,7 +64,12 @@
 // redirect printf to host serial
 #define REDIRECT_PRINTF_TO_SERIAL 1

-// FIXME override F_CPU to PCLK1, as marlin freaks out otherwise
-#define F_CPU (SYSTEM_CLOCK_FREQUENCIES.pclk1)
+// F_CPU must be known at compile time, but on HC32F460 it's not.
+// Thus we assume HCLK to be 200MHz, as that's what is configured in
+// 'core_hook_sysclock_init' in 'sysclock.cpp'.
+// If you face issues with this assumption, please double-check with the values
+// printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
+// see also: HAL_TIMER_RATE in timers.h
+#define F_CPU 200000000 // 200MHz HCLK

 #endif // _HC32_APP_CONFIG_H_
@@ -101,12 +101,14 @@ void setup_endstop_interrupts() {

  SETUP(Z_MIN_PROBE);

+  SETUP(CALIBRATION);
+
  #undef SETUP
 }

 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE, USE_CALIBRATION)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
  #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0
@@ -30,7 +30,7 @@
 #endif

 #if ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 1, 0)
-  // because we use app_config.h introduced in arduino core version 1.1.0, the 
+  // because we use app_config.h introduced in arduino core version 1.1.0, the
  // HAL is not compatible with older versions
  #error "The HC32 HAL is not compatible with Arduino Core versions < 1.1.0. Consider updating the Arduino Core."
 #endif
@@ -94,8 +94,10 @@
    #error "SERIAL_DMA requires USART_RX_DMA_SUPPORT to be enabled in the arduino core."
  #endif

-  // USART_RX_DMA_SUPPORT does not implement core_hook_usart_rx_irq, which is required for the emergency parser
-  #if ENABLED(EMERGENCY_PARSER)
+  // Before arduino core version 1.2.0, USART_RX_DMA_SUPPORT did not implement 
+  // core_hook_usart_rx_irq, which is required for the emergency parser.
+  // With 1.2.0, this was fixed (see https://github.com/shadow578/framework-arduino-hc32f46x/pull/25).
+  #if ENABLED(EMERGENCY_PARSER) && ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 2, 0)
    #error "EMERGENCY_PARSER is not supported with SERIAL_DMA. Please disable either SERIAL_DMA or EMERGENCY_PARSER."
  #endif

@@ -31,24 +31,24 @@

 #define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
 #define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define VALID_PIN(pin) IS_GPIO_PIN(pin)
+#define isValidPin(pin) IS_GPIO_PIN(pin)

 // Note: pin_array is defined in `Marlin/src/pins/pinsDebug.h`, and since this file is included
 // after it, it is available in this file as well.
-#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin)
+#define getPinByIndex(p) pin_t(pin_array[p].pin)
 #define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PIN(p)                              \
+#define printPinNumber(p)                              \
  do {                                            \
    sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); \
    SERIAL_ECHO(buffer);                          \
  } while (0)
-#define PRINT_PIN_ANALOG(p)                                               \
+#define printPinAnalog(p)                                               \
  do {                                                                    \
-    sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); \
+    sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); \
    SERIAL_ECHO(buffer);                                                  \
  } while (0)
-#define PRINT_PORT(p) print_port(p)
-#define PRINT_ARRAY_NAME(x)                                                          \
+#define PRINT_PORT(p) printPinPort(p)
+#define printPinNameByIndex(x)                                                          \
  do {                                                                               \
    sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); \
    SERIAL_ECHO(buffer);                                                             \
@@ -71,14 +71,14 @@
  #define M43_NEVER_TOUCH(Q) (IS_HOST_USART_PIN(Q) || IS_OSC_PIN(Q))
 #endif

-static pin_t DIGITAL_PIN_TO_ANALOG_PIN(pin_t pin) {
-  if (!VALID_PIN(pin)) return -1;
+static int8_t digitalPinToAnalogIndex(pin_t pin) {
+  if (!isValidPin(pin)) return -1;
  const int8_t adc_channel = int8_t(PIN_MAP[pin].adc_info.channel);
  return pin_t(adc_channel);
 }

-static bool IS_ANALOG(pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
+static bool isAnalogPin(pin_t pin) {
+  if (!isValidPin(pin)) return false;

  if (PIN_MAP[pin].adc_info.channel != ADC_PIN_INVALID)
    return _GET_MODE(pin) == INPUT_ANALOG && !M43_NEVER_TOUCH(pin);
@@ -86,13 +86,13 @@ static bool IS_ANALOG(pin_t pin) {
  return false;
 }

-static bool GET_PINMODE(const pin_t pin) {
-  return VALID_PIN(pin) && !IS_INPUT(pin);
+static bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
 }

-static bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
-  const pin_t pin = GET_ARRAY_PIN(array_pin);
-  return (!IS_ANALOG(pin));
+static bool getPinIsDigitalByIndex(const int16_t array_pin) {
+  const pin_t pin = getPinByIndex(array_pin);
+  return (!isAnalogPin(pin));
 }

 /**
@@ -117,7 +117,7 @@ bool pwm_status(const pin_t pin) {
  return timera_is_unit_initialized(unit) && timera_is_channel_active(unit, channel) && getPinMode(pin) == OUTPUT_PWM;
 }

-void pwm_details(const pin_t pin) {
+void printPinPWM(const pin_t pin) {
  // Get timer assignment for pin
  timera_config_t *unit;
  en_timera_channel_t channel;
@@ -161,7 +161,7 @@ void pwm_details(const pin_t pin) {
  }
 }

-void print_port(pin_t pin) {
+void printPinPort(pin_t pin) {
  const char port = 'A' + char(pin >> 4); // Pin div 16
  const int16_t gbit = PIN_MAP[pin].bit_pos;
  char buffer[8];
@@ -96,29 +96,44 @@ void core_hook_sysclock_init() {
    #endif
  #endif

-  // Setup clock divisors for sysclk = 200 MHz:
+  // sysclk is now configured according to F_CPU (i.e., 200MHz PLL output)
+  const uint32_t sysclock = F_CPU;
+
+  // Setup clock divisors for sysclk = 200 MHz
  // Note: PCLK1 is used for step+temp timers, and need to be kept at 50 MHz (until there is a better solution)
-  stc_clk_sysclk_cfg_t sysClkConf = {
+  constexpr stc_clk_sysclk_cfg_t sysClkConf = {
      .enHclkDiv = ClkSysclkDiv1,  // HCLK  = 200 MHz (CPU)
      .enExclkDiv = ClkSysclkDiv2, // EXCLK = 100 MHz (SDIO)
-      .enPclk0Div = ClkSysclkDiv1, // PCLK0 = 200 MHz (Timer6 (not used))
+      .enPclk0Div = ClkSysclkDiv2, // PCLK0 = 100 MHz (Timer6 (not used))
      .enPclk1Div = ClkSysclkDiv4, // PCLK1 = 50 MHz (USART, SPI, I2S, Timer0 (step+temp), TimerA (Servo))
-      .enPclk2Div = ClkSysclkDiv4, // PCLK2 = 50 MHz (ADC)
-      .enPclk3Div = ClkSysclkDiv4, // PCLK3 = 50 MHz (I2C, WDT)
+      .enPclk2Div = ClkSysclkDiv8, // PCLK2 = 25 MHz (ADC)
+      .enPclk3Div = ClkSysclkDiv8, // PCLK3 = 25 MHz (I2C, WDT)
      .enPclk4Div = ClkSysclkDiv2, // PCLK4 = 100 MHz (ADC ctl)
  };
+
+  #if ARDUINO_CORE_VERSION_INT >= GET_VERSION_INT(1, 2, 0)
+    assert_system_clocks_valid<
+      sysclock,
+      sysClkConf.enHclkDiv,
+      sysClkConf.enPclk0Div,
+      sysClkConf.enPclk1Div,
+      sysClkConf.enPclk2Div,
+      sysClkConf.enPclk3Div,
+      sysClkConf.enPclk4Div,
+      sysClkConf.enExclkDiv
+    >();
+  #endif
+
  sysclock_set_clock_dividers(&sysClkConf);

  // Set power mode
-  #define POWER_MODE_SYSTEM_CLOCK 200000000 // 200 MHz
-  power_mode_update_pre(POWER_MODE_SYSTEM_CLOCK);
+  power_mode_update_pre(sysclock);

  // Switch to MPLL as sysclk source
  CLK_SetSysClkSource(CLKSysSrcMPLL);

  // Set power mode
-  power_mode_update_post(POWER_MODE_SYSTEM_CLOCK);
-  #undef POWER_MODE_SYSTEM_CLOCK
+  power_mode_update_post(sysclock);
 }

 #endif // ARDUINO_ARCH_HC32
@@ -38,44 +38,48 @@ extern Timer0 step_timer;
 // Timer Configurations
 //

-// TODO: some calculations (step irq min_step_rate) require the timer rate to be known at compile time
-//       this is not possible with the HC32F460, as the timer rate depends on PCLK1
-//       as a workaround, PCLK1 = 50MHz is assumed (check with clock dump in MarlinHAL::init())
-#define HAL_TIMER_RATE 50000000 // 50MHz
-// #define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY
-
-// TODO: CYCLES_PER_MICROSECOND seems to be used by Marlin to calculate the number of cycles per microsecond in the timer ISRs
-//       by default, it uses F_CPU, but since that is not known at compile time for HC32, we overwrite it here
-#undef CYCLES_PER_MICROSECOND
-#define CYCLES_PER_MICROSECOND (HAL_TIMER_RATE / 1000000UL)
+/**
+ * HAL_TIMER_RATE must be known at compile time since it's used to calculate
+ * STEPPER_TIMER_RATE, which is used in 'constexpr' calculations.
+ * On the HC32F460 the timer rate depends on PCLK1, which is derived from the
+ * system clock configured at runtime. As a workaround, we use the existing
+ * assumption of a 200MHz clock, defining F_CPU as 200000000, then configure PCLK1
+ * as F_CPU with a divider of 4 in 'sysclock.cpp::core_hook_sysclock_init'.
+ *
+ * If you face issues with this assumption, please double-check with the values
+ * printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
+ *
+ * TODO: If the 'constexpr' requirement is ever lifted, use TIMER0_BASE_FREQUENCY instead
+ */
+#define HAL_TIMER_RATE (F_CPU / 4) // i.e., 50MHz
+//#define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY

 // Temperature timer
-#define TEMP_TIMER_NUM (&temp_timer)
-#define TEMP_TIMER_PRIORITY DDL_IRQ_PRIORITY_02
-#define TEMP_TIMER_PRESCALE 16ul
-#define TEMP_TIMER_RATE 1000                 // 1kHz
-#define TEMP_TIMER_FREQUENCY TEMP_TIMER_RATE // Alias for Marlin
+#define TEMP_TIMER_NUM        (&temp_timer)
+#define TEMP_TIMER_PRIORITY   DDL_IRQ_PRIORITY_02
+#define TEMP_TIMER_PRESCALE     16UL          // 12.5MHz
+#define TEMP_TIMER_RATE       1000            // 1kHz
+#define TEMP_TIMER_FREQUENCY  TEMP_TIMER_RATE // 1kHz also

 // Stepper timer
-#define STEP_TIMER_NUM (&step_timer)
-#define STEP_TIMER_PRIORITY DDL_IRQ_PRIORITY_01
-#define STEPPER_TIMER_PRESCALE 16ul
+#define STEP_TIMER_NUM         (&step_timer)
+#define STEP_TIMER_PRIORITY    DDL_IRQ_PRIORITY_00  // Top priority, nothing else uses it
+#define STEPPER_TIMER_PRESCALE  16UL                // 12.5MHz

-// TODO: STEPPER_TIMER_RATE seems to work fine like this, but requires further testing...
-#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // 50MHz / 16 = 3.125MHz
-#define STEPPER_TIMER_TICKS_PER_US (STEPPER_TIMER_RATE / 1000000)
+#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)  // 50MHz / 16 = 3.125MHz
+#define STEPPER_TIMER_TICKS_PER_US (STEPPER_TIMER_RATE / 1000000UL)   // Integer 3

 // Pulse timer (== stepper timer)
-#define PULSE_TIMER_NUM STEP_TIMER_NUM
-#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
+#define PULSE_TIMER_NUM           STEP_TIMER_NUM
+#define PULSE_TIMER_PRESCALE      STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US  STEPPER_TIMER_TICKS_PER_US

 //
 // Channel aliases
 //
-#define MF_TIMER_TEMP TEMP_TIMER_NUM
-#define MF_TIMER_STEP STEP_TIMER_NUM
-#define MF_TIMER_PULSE PULSE_TIMER_NUM
+#define MF_TIMER_TEMP   TEMP_TIMER_NUM
+#define MF_TIMER_STEP   STEP_TIMER_NUM
+#define MF_TIMER_PULSE  PULSE_TIMER_NUM

 //
 // HAL functions
@@ -82,7 +82,7 @@ static inline uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, c
 }

 static void u8g_sw_spi_shift_out(uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed);
  #else
    swSpiTransfer_mode_0(val, SPI_speed);
@@ -116,15 +116,15 @@ uint8_t u8g_com_HAL_HC32_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, voi
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864) // This LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                           // SCK idle state needs to be set to the proper idle state before
-                                                 // the next chip select goes active
-          WRITE(DOGLCD_SCK, HIGH);               // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
+                                    //  the next chip select goes active
+          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
          WRITE(DOGLCD_CS, LOW);
        }
        else {
          WRITE(DOGLCD_CS, HIGH);
-          WRITE(DOGLCD_SCK, LOW);  // Set SCK to mode 0 idle state after CS goes inactive
+          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        WRITE(DOGLCD_CS, !arg_val);
@@ -52,7 +52,7 @@ uint8_t MarlinHAL::active_ch = 0;

 uint16_t MarlinHAL::adc_value() {
  const pin_t pin = analogInputToDigitalPin(active_ch);
-  if (!VALID_PIN(pin)) return 0;
+  if (!isValidPin(pin)) return 0;
  return uint16_t((Gpio::get(pin) >> 2) & 0x3FF); // return 10bit value as Marlin expects
 }

@@ -49,28 +49,28 @@ extern "C" void delay(const int msec) {
 // IO functions
 // As defined by Arduino INPUT(0x0), OUTPUT(0x1), INPUT_PULLUP(0x2)
 void pinMode(const pin_t pin, const uint8_t mode) {
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::setMode(pin, mode);
 }

 void digitalWrite(pin_t pin, uint8_t pin_status) {
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::set(pin, pin_status);
 }

 bool digitalRead(pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
+  if (!isValidPin(pin)) return false;
  return Gpio::get(pin);
 }

 void analogWrite(pin_t pin, int pwm_value) {  // 1 - 254: pwm_value, 0: LOW, 255: HIGH
-  if (!VALID_PIN(pin)) return;
+  if (!isValidPin(pin)) return;
  Gpio::set(pin, pwm_value);
 }

 uint16_t analogRead(pin_t adc_pin) {
-  if (!VALID_PIN(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin))) return 0;
-  return Gpio::get(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin));
+  if (!isValidPin(digitalPinToAnalogIndex(adc_pin))) return 0;
+  return Gpio::get(digitalPinToAnalogIndex(adc_pin));
 }

 char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s) {
@@ -42,7 +42,7 @@ constexpr pin_t analogInputToDigitalPin(const int8_t p) {
 }

 // Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
+constexpr int8_t digitalPinToAnalogIndex(const pin_t p) {
  return (WITHIN(p, analog_offset, NUM_DIGITAL_PINS) ? p - analog_offset : P_NC);
 }

@@ -50,7 +50,7 @@ constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t p) {
 constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) { return pin; }

 // Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t p) { return WITHIN(p, 0, NUM_DIGITAL_PINS); }
+constexpr bool isValidPin(const pin_t p) { return WITHIN(p, 0, NUM_DIGITAL_PINS); }

 // Test whether the pin is PWM
 constexpr bool PWM_PIN(const pin_t p) { return false; }
@@ -29,20 +29,20 @@
 */

 #define NUMBER_PINS_TOTAL   NUM_DIGITAL_PINS
-#define IS_ANALOG(P)        (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define isAnalogPin(P)        (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p)  digitalRead(p)
-#define GET_ARRAY_PIN(p)    pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p)    pin_array[p].pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p)        do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD      16 // space needed to be pretty if not first name assigned to a pin

 // active ADC function/mode/code values for PINSEL registers
 constexpr int8_t ADC_pin_mode(pin_t pin) { return -1; }

-int8_t get_pin_mode(const pin_t pin) { return VALID_PIN(pin) ? 0 : -1; }
+int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? 0 : -1; }

-bool GET_PINMODE(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
  const int8_t pin_mode = get_pin_mode(pin);
  if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // Invalid pin or active analog pin
    return false;
@@ -50,11 +50,11 @@ bool GET_PINMODE(const pin_t pin) {
  return (Gpio::getMode(pin) != 0); // Input/output state
 }

-bool GET_ARRAY_IS_DIGITAL(const pin_t pin) {
-  return (!IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
+bool getPinIsDigitalByIndex(const pin_t pin) {
+  return (!isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin));
 }

-void pwm_details(const pin_t pin) {}
+void printPinPWM(const pin_t pin) {}
 bool pwm_status(const pin_t) { return false; }

-void print_port(const pin_t) {}
+void printPinPort(const pin_t) {}
@@ -28,12 +28,6 @@
                        // spiBeginTransaction.
 #endif

-// Onboard SD
-//#define SD_SCK_PIN     P0_07
-//#define SD_MISO_PIN    P0_08
-//#define SD_MOSI_PIN    P0_09
-//#define SD_SS_PIN      P0_06
-
 // External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        50
@@ -82,13 +82,13 @@ extern DefaultSerial1 USBSerial;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL USBSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+#ifdef MMU_SERIAL_PORT
+  #if MMU_SERIAL_PORT == -1
+    #define MMU_SERIAL USBSerial
+  #elif WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
+    #error "MMU_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
  #endif
 #endif

@@ -100,7 +100,7 @@ extern DefaultSerial1 USBSerial;
  #else
    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
  #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
  #endif
 #endif
@@ -137,12 +137,12 @@ extern DefaultSerial1 USBSerial;
 //

 // Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t pin) {
+constexpr bool isValidPin(const pin_t pin) {
  return LPC176x::pin_is_valid(pin);
 }

 // Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
+constexpr int8_t digitalPinToAnalogIndex(const pin_t pin) {
  return (LPC176x::pin_is_valid(pin) && LPC176x::pin_has_adc(pin)) ? pin : -1;
 }

@@ -159,7 +159,7 @@ constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
 // Parse a G-code word into a pin index
 int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
 // P0.6 thru P0.9 are for the onboard SD card
-#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
+#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09

 // ------------------------
 // Defines
@@ -146,6 +146,12 @@ void setup_endstop_interrupts() {
    #endif
    _ATTACH(Z_MIN_PROBE_PIN);
  #endif
+  #if USE_CALIBRATION
+    #if !LPC1768_PIN_INTERRUPT_M(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
  #if USE_I_MAX
    #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
      #error "I_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
@@ -26,8 +26,10 @@

 void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
  if (!LPC176x::pin_is_valid(pin)) return;
-  if (LPC176x::pwm_attach_pin(pin))
-    LPC176x::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);  // map 1-254 onto PWM range
+  if (LPC176x::pwm_attach_pin(pin)) {
+    const uint32_t duty = map(invert ? v_size - v : v, 0, v_size, 0, LPC176x::pwm_get_period(pin));
+    LPC176x::pwm_write(pin, duty);
+  }
 }

 void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
@@ -66,7 +66,7 @@
 #define _WRITE(IO,V)          WRITE_PIN(IO,V)

 /// toggle a pin
-#define _TOGGLE(IO)           _WRITE(IO, !READ(IO))
+#define _TOGGLE(IO)           LPC176x::gpio_toggle(IO)

 /// set pin as input
 #define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
@@ -29,12 +29,12 @@
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p) extDigitalRead(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p) pin_array[p].pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), LPC176x::pin_port(p), LPC176x::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR("_A%d     "), LPC176x::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 17 // space needed to be pretty if not first name assigned to a pin

 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
@@ -42,15 +42,15 @@
  #define M43_NEVER_TOUCH(Q) ((Q) == P0_29 || (Q) == P0_30 || (Q) == P2_09)  // USB pins
 #endif

-bool GET_PINMODE(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
  if (!LPC176x::pin_is_valid(pin) || LPC176x::pin_adc_enabled(pin)) // Invalid pin or active analog pin
    return false;

  return LPC176x::gpio_direction(pin);
 }

-#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
+#define getPinIsDigitalByIndex(x) ((bool) pin_array[x].is_digital)

-void print_port(const pin_t) {}
-void pwm_details(const pin_t) {}
+void printPinPort(const pin_t) {}
+void printPinPWM(const pin_t) {}
 bool pwm_status(const pin_t) { return false; }
@@ -28,12 +28,13 @@
                        // spiBeginTransaction.
 #endif

-/** onboard SD card */
-//#define SD_SCK_PIN        P0_07
-//#define SD_MISO_PIN       P0_08
-//#define SD_MOSI_PIN       P0_09
-//#define SD_SS_PIN         P0_06
-/** external */
+// Onboard SD
+//#define SD_SCK_PIN     P0_07
+//#define SD_MISO_PIN    P0_08
+//#define SD_MOSI_PIN    P0_09
+//#define SD_SS_PIN      P0_06
+
+// External SD
 #ifndef SD_SCK_PIN
  #define SD_SCK_PIN        P0_15
 #endif
@@ -132,7 +132,7 @@ uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck
 static uint8_t SPI_speed = 0;

 static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
  #else
    swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
@@ -160,15 +160,15 @@ uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)  // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                            //   SCK idle state needs to be set to the proper idle state before
-                                                  //   the next chip select goes active
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);     // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3                    // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                          // SCK idle state needs to be set to the proper idle state before
+                                                //  the next chip select goes active
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
          u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
        }
        else {
          u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);  // Set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
@@ -13,9 +13,9 @@ if pioutil.is_pio_build():
    target_drive = "REARM"

    import platform
-
    current_OS = platform.system()
-    Import("env")
+
+    env = pioutil.env

    def print_error(e):
        print('\nUnable to find destination disk (%s)\n' \
@@ -87,11 +87,11 @@ extern MSerialT serial_stream_3;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+#ifdef MMU_SERIAL_PORT
+  #if WITHIN(MMU_SERIAL_PORT, 0, 3)
+    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. Please update your configuration."
+    #error "MMU_SERIAL_PORT must be from 0 to 3. Please update your configuration."
  #endif
 #endif

@@ -27,9 +27,9 @@

 int8_t ADC_pin_mode(pin_t pin) { return -1; }

-int8_t get_pin_mode(const pin_t pin) { return VALID_PIN(pin) ? 0 : -1; }
+int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? 0 : -1; }

-bool GET_PINMODE(const pin_t pin) {
+bool getValidPinMode(const pin_t pin) {
  const int8_t pin_mode = get_pin_mode(pin);
  if (pin_mode == -1 || pin_mode == ADC_pin_mode(pin)) // Invalid pin or active analog pin
    return false;
@@ -37,12 +37,12 @@ bool GET_PINMODE(const pin_t pin) {
  return (Gpio::getMode(pin) != 0); // Input/output state
 }

-bool GET_ARRAY_IS_DIGITAL(const pin_t pin) {
-  return !IS_ANALOG(pin) || get_pin_mode(pin) != ADC_pin_mode(pin);
+bool getPinIsDigitalByIndex(const pin_t pin) {
+  return !isAnalogPin(pin) || get_pin_mode(pin) != ADC_pin_mode(pin);
 }

-void print_port(const pin_t) {}
-void pwm_details(const pin_t) {}
+void printPinPort(const pin_t) {}
+void printPinPWM(const pin_t) {}
 bool pwm_status(const pin_t) { return false; }

 #endif
@@ -30,19 +30,19 @@
 */

 #define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P) >= 0 ? 1 : 0)
 #define digitalRead_mod(p)  digitalRead(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p) pin_array[p].pin
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 16 // space needed to be pretty if not first name assigned to a pin

 // Active ADC function/mode/code values for PINSEL registers
 int8_t ADC_pin_mode(pin_t pin);
 int8_t get_pin_mode(const pin_t pin);
-bool GET_PINMODE(const pin_t pin);
-bool GET_ARRAY_IS_DIGITAL(const pin_t pin);
-void print_port(const pin_t);
-void pwm_details(const pin_t);
+bool getValidPinMode(const pin_t pin);
+bool getPinIsDigitalByIndex(const pin_t pin);
+void printPinPort(const pin_t);
+void printPinPWM(const pin_t);
 bool pwm_status(const pin_t);
@@ -131,7 +131,7 @@ static uint8_t swSpiInit(const uint8_t spi_speed, const uint8_t clk_pin, const u
 }

 static void u8g_sw_spi_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
  #else
    swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
@@ -159,15 +159,15 @@ uint8_t u8g_com_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_pt
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)  // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                            //   SCK idle state needs to be set to the proper idle state before
-                                                  //   the next chip select goes active
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);     // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3                    // LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {                          // SCK idle state needs to be set to the proper idle state before
+                                                //  the next chip select goes active
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);   // Set SCK to mode 3 idle state before CS goes active
          u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
        }
        else {
          u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);  // Set SCK to mode 0 idle state after CS goes inactive
+          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
@@ -69,13 +69,13 @@ extern DefaultSerial3 MSerial1;
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 0, 1)
-    #define MMU2_SERIAL MSERIAL(SERIAL_PORT)
-  #elif MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL MSerialUSB
+#ifdef MMU_SERIAL_PORT
+  #if WITHIN(MMU_SERIAL_PORT, 0, 1)
+    #define MMU_SERIAL MSERIAL(SERIAL_PORT)
+  #elif MMU_SERIAL_PORT == -1
+    #define MMU_SERIAL MSerialUSB
  #else
-    #error "MMU2_SERIAL_PORT must be -1 (Native USB only)."
+    #error "MMU_SERIAL_PORT must be -1 (Native USB only)."
  #endif
 #endif

@@ -83,6 +83,7 @@
 #define MATCH_Z4_MAX_EILINE(P) TERN0(USE_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
 #define MATCH_Z4_MIN_EILINE(P) TERN0(USE_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
 #define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(USE_Z_MIN_PROBE, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
+#define MATCH_CALIBRATION_EILINE(P) TERN0(USE_CALIBRATION, DEFER4(MATCH_EILINE)(P, CALIBRATION_PIN))

 #define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1    \
  && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)   \
@@ -99,7 +100,8 @@
  && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
  && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
  && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
-  && !MATCH_Z_MIN_PROBE_EILINE(P) )
+  && !MATCH_Z_MIN_PROBE_EILINE(P)                       \
+  && !MATCH_CALIBRATION_EILINE(P) )

 // One ISR for all EXT-Interrupts
 void endstop_ISR() { endstops.update(); }
@@ -208,6 +210,12 @@ void setup_endstop_interrupts() {
    #endif
    _ATTACH(Z_MIN_PROBE_PIN);
  #endif
+  #if USE_CALIBRATION
+    #if !AVAILABLE_EILINE(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
  #if USE_I_MAX
    #if !AVAILABLE_EILINE(I_MAX_PIN)
      #error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
@@ -152,7 +152,7 @@
                                 : ((P) == 14) ? ADC_INPUTCTRL_MUXPOS_PIN14 \
                                 : ADC_INPUTCTRL_MUXPOS_PIN15)

-#define digitalPinToAnalogInput(P) (WITHIN(P, 67, 74) ? (P) - 67 : WITHIN(P, 54, 61) ? 8 + (P) - 54 : WITHIN(P, 12, 13) ? 16 + (P) - 12 : P == 9 ? 18 : -1)
+#define digitalPinToAnalogIndex(P) (WITHIN(P, 67, 74) ? (P) - 67 : WITHIN(P, 54, 61) ? 8 + (P) - 54 : WITHIN(P, 12, 13) ? 16 + (P) - 12 : P == 9 ? 18 : -1)

 /**
 * pins
@@ -30,14 +30,13 @@

 #define digitalRead_mod(p) extDigitalRead(p)
 #define PRINT_PORT(p) do{ SERIAL_ECHOPGM("  Port: "); sprintf_P(buffer, PSTR("%c%02ld"), 'A' + g_APinDescription[p].ulPort, g_APinDescription[p].ulPin); SERIAL_ECHO(buffer); }while (0)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
-#define VALID_PIN(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL)
-#define DIGITAL_PIN_TO_ANALOG_PIN(p) digitalPinToAnalogInput(p)
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P)!=-1)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p) pin_array[p].pin
+#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
+#define isValidPin(pin) (pin >= 0 && pin < (int8_t)NUMBER_PINS_TOTAL)
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P)!=-1)
 #define pwm_status(pin) digitalPinHasPWM(pin)
 #define MULTI_NAME_PAD 27 // space needed to be pretty if not first name assigned to a pin

@@ -45,13 +44,13 @@
 // uses pin index
 #define M43_NEVER_TOUCH(Q) ((Q) >= 75)

-bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
  const EPortType samdport = g_APinDescription[pin].ulPort;
  const uint32_t samdpin = g_APinDescription[pin].ulPin;
  return PORT->Group[samdport].DIR.reg & MASK(samdpin) || (PORT->Group[samdport].PINCFG[samdpin].reg & (PORT_PINCFG_INEN | PORT_PINCFG_PULLEN)) == PORT_PINCFG_PULLEN;
 }

-void pwm_details(int32_t pin) {
+void printPinPWM(int32_t pin) {
  if (pwm_status(pin)) {
    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
    //SERIAL_ECHOPGM("PWM = ", duty);
@@ -69,13 +69,23 @@
    #endif
  #endif

-  #ifdef MMU2_SERIAL_PORT
-    #if MMU2_SERIAL_PORT == -1
-      #define MMU2_SERIAL MSerial0
-    #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-      #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+  #ifdef SERIAL_PORT_3
+    #if SERIAL_PORT_3 == -1
+      #define MYSERIAL3 MSerial0
+    #elif WITHIN(SERIAL_PORT_3, 0, 3)
+      #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
    #else
-      #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
+      #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
+    #endif
+  #endif
+
+  #ifdef MMU_SERIAL_PORT
+    #if MMU_SERIAL_PORT == -1
+      #define MMU_SERIAL MSerial0
+    #elif WITHIN(MMU_SERIAL_PORT, 0, 3)
+      #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
+    #else
+      #error "MMU_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
    #endif
  #endif

@@ -82,6 +82,7 @@
 #define MATCH_Z4_MAX_EILINE(P) TERN0(USE_Z4_MAX, DEFER4(MATCH_EILINE)(P, Z4_MAX_PIN))
 #define MATCH_Z4_MIN_EILINE(P) TERN0(USE_Z4_MIN, DEFER4(MATCH_EILINE)(P, Z4_MIN_PIN))
 #define MATCH_Z_MIN_PROBE_EILINE(P) TERN0(USE_Z_MIN_PROBE, DEFER4(MATCH_EILINE)(P, Z_MIN_PROBE_PIN))
+#define MATCH_CALIBRATION_EILINE(P) TERN0(USE_CALIBRATION, DEFER4(MATCH_EILINE)(P, CALIBRATION_PIN))

 #define AVAILABLE_EILINE(P) ( PIN_TO_EILINE(P) != -1    \
  && !MATCH_X_MAX_EILINE(P) && !MATCH_X_MIN_EILINE(P)   \
@@ -98,7 +99,8 @@
  && !MATCH_Z2_MAX_EILINE(P) && !MATCH_Z2_MIN_EILINE(P) \
  && !MATCH_Z3_MAX_EILINE(P) && !MATCH_Z3_MIN_EILINE(P) \
  && !MATCH_Z4_MAX_EILINE(P) && !MATCH_Z4_MIN_EILINE(P) \
-  && !MATCH_Z_MIN_PROBE_EILINE(P) )
+  && !MATCH_Z_MIN_PROBE_EILINE(P)                       \
+  && !MATCH_CALIBRATION_EILINE(P) )

 // One ISR for all EXT-Interrupts
 void endstop_ISR() { endstops.update(); }
@@ -183,6 +185,12 @@ void setup_endstop_interrupts() {
    #endif
    _ATTACH(Z_MIN_PROBE_PIN);
  #endif
+  #if USE_CALIBRATION
+    #if !AVAILABLE_EILINE(CALIBRATION_PIN)
+      #error "CALIBRATION_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
+    #endif
+    _ATTACH(CALIBRATION_PIN);
+  #endif
  #if USE_I_MAX
    #if !AVAILABLE_EILINE(I_MAX_PIN)
      #error "I_MAX_PIN has no EXTINT line available. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
@@ -174,7 +174,7 @@
                                   : (P == 17) ? PIN_TO_SAMD_PIN(13)  \
                                   : PIN_TO_SAMD_PIN(9))

-  #define digitalPinToAnalogInput(P) (WITHIN(P, 67, 74) ? (P) - 67 : WITHIN(P, 54, 61) ? 8 + (P) - 54 : WITHIN(P, 12, 13) ? 16 + (P) - 12 : P == 9 ? 18 : -1)
+  #define digitalPinToAnalogIndex(P) (WITHIN(P, 67, 74) ? (P) - 67 : WITHIN(P, 54, 61) ? 8 + (P) - 54 : WITHIN(P, 12, 13) ? 16 + (P) - 12 : P == 9 ? 18 : -1)

  /**
   * pins
@@ -29,14 +29,13 @@

 #define digitalRead_mod(p) extDigitalRead(p)
 #define PRINT_PORT(p) do{ SERIAL_ECHOPGM("  Port: "); sprintf_P(buffer, PSTR("%c%02ld"), 'A' + g_APinDescription[p].ulPort, g_APinDescription[p].ulPin); SERIAL_ECHO(buffer); }while (0)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define GET_ARRAY_IS_DIGITAL(p) pin_array[p].is_digital
-#define VALID_PIN(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
-#define DIGITAL_PIN_TO_ANALOG_PIN(p) digitalPinToAnalogInput(p)
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P)!=-1)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3d "), p); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define getPinByIndex(p) pin_array[p].pin
+#define getPinIsDigitalByIndex(p) pin_array[p].is_digital
+#define isValidPin(pin) (pin >= 0 && pin < int8_t(NUMBER_PINS_TOTAL))
+#define isAnalogPin(P) (digitalPinToAnalogIndex(P)!=-1)
 #define pwm_status(pin) digitalPinHasPWM(pin)
 #define MULTI_NAME_PAD 27 // space needed to be pretty if not first name assigned to a pin

@@ -44,13 +43,13 @@
 // uses pin index
 #define M43_NEVER_TOUCH(Q) ((Q) >= 75)

-bool GET_PINMODE(int8_t pin) {  // 1: output, 0: input
+bool getValidPinMode(int8_t pin) {  // 1: output, 0: input
  const EPortType samdport = g_APinDescription[pin].ulPort;
  const uint32_t samdpin = g_APinDescription[pin].ulPin;
  return PORT->Group[samdport].DIR.reg & MASK(samdpin) || (PORT->Group[samdport].PINCFG[samdpin].reg & (PORT_PINCFG_INEN | PORT_PINCFG_PULLEN)) == PORT_PINCFG_PULLEN;
 }

-void pwm_details(int32_t pin) {
+void printPinPWM(int32_t pin) {
  if (pwm_status(pin)) {
    //uint32_t chan = g_APinDescription[pin].ulPWMChannel TODO when fast pwm is operative;
    //SERIAL_ECHOPGM("PWM = ", duty);
@@ -90,15 +90,15 @@
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if WITHIN(MMU2_SERIAL_PORT, 1, 9)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+#ifdef MMU_SERIAL_PORT
+  #if WITHIN(MMU_SERIAL_PORT, 1, 9)
+    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
  #elif !defined(USBCON)
-    #error "MMU2_SERIAL_PORT must be from 1 to 9."
-  #elif MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL MSerialUSB
+    #error "MMU_SERIAL_PORT must be from 1 to 9."
+  #elif MMU_SERIAL_PORT == -1
+    #define MMU_SERIAL MSerialUSB
  #else
-    #error "MMU2_SERIAL_PORT must be from 1 to 9, or -1 for Native USB."
+    #error "MMU_SERIAL_PORT must be from 1 to 9, or -1 for Native USB."
  #endif
 #endif

@@ -112,16 +112,24 @@
  #else
    #error "LCD_SERIAL_PORT must be from 1 to 9, or -1 for Native USB."
  #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
  #endif
 #endif

+#ifdef RS485_SERIAL_PORT
+  #if WITHIN(RS485_SERIAL_PORT, 1, 9)
+    #define RS485_SERIAL MSERIAL(RS485_SERIAL_PORT)
+  #else
+    #error "RS485_SERIAL_PORT must be from 1 to 9."
+  #endif
+#endif
+
 /**
 * TODO: review this to return 1 for pins that are not analog input
 */
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) (p)
+  #define analogInputToDigitalPin(p) pin_t(p)
 #endif

 //
@@ -37,7 +37,7 @@ static SPISettings spiConfig;
 // Public functions
 // ------------------------

-#if ENABLED(SOFTWARE_SPI)
+#if ANY(SOFTWARE_SPI, FORCE_SOFT_SPI)

  // ------------------------
  // Software SPI
@@ -37,6 +37,9 @@
 #ifndef USART5
  #define USART5 UART5
 #endif
+#ifndef USART6
+  #define USART6 UART6
+#endif
 #ifndef USART7
  #define USART7 UART7
 #endif
@@ -53,6 +53,7 @@
    inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }

    void _rx_complete_irq(serial_t *obj);
+    FORCE_INLINE static uint8_t buffer_overruns() { return 0; } // Not implemented. Void to avoid platform-dependent code.

    protected:
      usart_rx_callback_t _rx_callback;
@@ -0,0 +1,136 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm / Ryan Power
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifdef HAL_STM32
+
+#include "../../../inc/MarlinConfig.h"
+
+#if ALL(HAS_MARLINUI_U8GLIB, FORCE_SOFT_SPI)
+
+#include <U8glib-HAL.h>
+#include "../../shared/HAL_SPI.h"
+
+#define nop asm volatile ("\tnop\n")
+
+static inline uint8_t swSpiTransfer_mode_0(uint8_t b) {
+  for (uint8_t i = 0; i < 8; ++i) {
+    const uint8_t state = (b & 0x80) ? HIGH : LOW;
+    WRITE(DOGLCD_SCK, HIGH);
+    WRITE(DOGLCD_MOSI, state);
+    b <<= 1;
+    WRITE(DOGLCD_SCK, LOW);
+  }
+  return b;
+}
+
+static inline uint8_t swSpiTransfer_mode_3(uint8_t b) {
+  for (uint8_t i = 0; i < 8; ++i) {
+    const uint8_t state = (b & 0x80) ? HIGH : LOW;
+    WRITE(DOGLCD_SCK, LOW);
+    WRITE(DOGLCD_MOSI, state);
+    b <<= 1;
+    WRITE(DOGLCD_SCK, HIGH);
+  }
+  return b;
+}
+
+static void u8g_sw_spi_shift_out(uint8_t val) {
+  #if U8G_SPI_USE_MODE_3
+    swSpiTransfer_mode_3(val);
+  #else
+    swSpiTransfer_mode_0(val);
+  #endif
+}
+
+static void swSpiInit() {
+  #if PIN_EXISTS(LCD_RESET)
+    SET_OUTPUT(LCD_RESET_PIN);
+  #endif
+  SET_OUTPUT(DOGLCD_A0);
+  OUT_WRITE(DOGLCD_SCK, LOW);
+  OUT_WRITE(DOGLCD_MOSI, LOW);
+  OUT_WRITE(DOGLCD_CS, HIGH);
+}
+
+uint8_t u8g_com_HAL_STM32_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
+  switch (msg) {
+    case U8G_COM_MSG_INIT:
+      swSpiInit();
+      break;
+
+    case U8G_COM_MSG_STOP:
+      break;
+
+    case U8G_COM_MSG_RESET:
+      #if PIN_EXISTS(LCD_RESET)
+        WRITE(LCD_RESET_PIN, arg_val);
+      #endif
+      break;
+
+    case U8G_COM_MSG_CHIP_SELECT:
+      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
+                                    //  the next chip select goes active
+          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
+          WRITE(DOGLCD_CS, LOW);
+          nop; // hold SCK high for a few ns
+          nop;
+         }
+        else {
+          WRITE(DOGLCD_CS, HIGH);
+          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
+        }
+      #else
+        WRITE(DOGLCD_CS, !arg_val);
+      #endif
+      break;
+
+    case U8G_COM_MSG_WRITE_BYTE:
+      u8g_sw_spi_shift_out(arg_val);
+      break;
+
+    case U8G_COM_MSG_WRITE_SEQ: {
+      uint8_t *ptr = (uint8_t *)arg_ptr;
+      while (arg_val > 0) {
+        u8g_sw_spi_shift_out(*ptr++);
+        arg_val--;
+      }
+    } break;
+
+    case U8G_COM_MSG_WRITE_SEQ_P: {
+      uint8_t *ptr = (uint8_t *)arg_ptr;
+      while (arg_val > 0) {
+        u8g_sw_spi_shift_out(u8g_pgm_read(ptr));
+        ptr++;
+        arg_val--;
+      }
+    } break;
+
+    case U8G_COM_MSG_ADDRESS: /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
+      WRITE(DOGLCD_A0, arg_val);
+      break;
+  }
+  return 1;
+}
+
+#endif // HAS_MARLINUI_U8GLIB && FORCE_SOFT_SPI
+#endif // HAL_STM32
@@ -45,6 +45,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -30,6 +30,3 @@
  #undef F_CPU
  #define F_CPU BOARD_F_CPU
 #endif
-
-// The Sensitive Pins array is not optimizable
-#define RUNTIME_ONLY_ANALOG_TO_DIGITAL
@@ -115,16 +115,16 @@ const XrefInfo pin_xref[] PROGMEM = {
  #define NUM_ANALOG_LAST ((NUM_ANALOG_FIRST) + (NUM_ANALOG_INPUTS) - 1)
 #endif
 #define NUMBER_PINS_TOTAL ((NUM_DIGITAL_PINS) + TERN0(HAS_HIGH_ANALOG_PINS, NUM_ANALOG_INPUTS))
-#define VALID_PIN(P) (WITHIN(P, 0, (NUM_DIGITAL_PINS) - 1) || TERN0(HAS_HIGH_ANALOG_PINS, WITHIN(P, NUM_ANALOG_FIRST, NUM_ANALOG_LAST)))
+#define isValidPin(P) (WITHIN(P, 0, (NUM_DIGITAL_PINS) - 1) || TERN0(HAS_HIGH_ANALOG_PINS, WITHIN(P, NUM_ANALOG_FIRST, NUM_ANALOG_LAST)))
 #define digitalRead_mod(Ard_num) extDigitalRead(Ard_num)  // must use Arduino pin numbers when doing reads
-#define PRINT_PIN(Q)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define DIGITAL_PIN_TO_ANALOG_PIN(ANUM) -1  // will report analog pin number in the print port routine
+#define printPinNumber(Q)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define digitalPinToAnalogIndex(ANUM) -1  // will report analog pin number in the print port routine

 // x is a variable used to search pin_array
-#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
-#define GET_ARRAY_PIN(x) ((pin_t) pin_array[x].pin)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define getPinIsDigitalByIndex(x) ((bool) pin_array[x].is_digital)
+#define getPinByIndex(x) ((pin_t) pin_array[x].pin)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 33 // space needed to be pretty if not first name assigned to a pin

 //
@@ -164,7 +164,7 @@ uint8_t get_pin_mode(const pin_t Ard_num) {
  }
 }

-bool GET_PINMODE(const pin_t Ard_num) {
+bool getValidPinMode(const pin_t Ard_num) {
  const uint8_t pin_mode = get_pin_mode(Ard_num);
  return pin_mode == MODE_PIN_OUTPUT || pin_mode == MODE_PIN_ALT;  // assume all alt definitions are PWM
 }
@@ -173,11 +173,11 @@ int8_t digital_pin_to_analog_pin(const pin_t Ard_num) {
  if (WITHIN(Ard_num, NUM_ANALOG_FIRST, NUM_ANALOG_LAST))
    return Ard_num - NUM_ANALOG_FIRST;

-  const uint32_t ind = digitalPinToAnalogInput(Ard_num);
+  const int8_t ind = digitalPinToAnalogIndex(Ard_num);
  return (ind < NUM_ANALOG_INPUTS) ? ind : -1;
 }

-bool IS_ANALOG(const pin_t Ard_num) {
+bool isAnalogPin(const pin_t Ard_num) {
  return get_pin_mode(Ard_num) == MODE_PIN_ANALOG;
 }

@@ -186,7 +186,7 @@ bool is_digital(const pin_t Ard_num) {
  return pin_mode == MODE_PIN_INPUT || pin_mode == MODE_PIN_OUTPUT;
 }

-void print_port(const pin_t Ard_num) {
+void printPinPort(const pin_t Ard_num) {
  char buffer[16];
  pin_t Index;
  for (Index = 0; Index < NUMBER_PINS_TOTAL; Index++)
@@ -226,7 +226,7 @@ bool pwm_status(const pin_t Ard_num) {
  return get_pin_mode(Ard_num) == MODE_PIN_ALT;
 }

-void pwm_details(const pin_t Ard_num) {
+void printPinPWM(const pin_t Ard_num) {
  #ifndef STM32F1xx
    if (pwm_status(Ard_num)) {
      uint32_t alt_all = 0;
@@ -285,4 +285,4 @@ void pwm_details(const pin_t Ard_num) {
  #else
    // TODO: F1 doesn't support changing pins function, so we need to check the function of the PIN and if it's enabled
  #endif
-} // pwm_details
+} // printPinPWM
@@ -238,7 +238,7 @@ void HAL_SD_MspInit(SD_HandleTypeDef *hsd) {
    hdma_sdio.Init.MemInc = DMA_MINC_ENABLE;
    hdma_sdio.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
    hdma_sdio.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
-    hdma_sdio.Init.Priority = DMA_PRIORITY_LOW;
+    hdma_sdio.Init.Priority = DMA_PRIORITY_MEDIUM;
    __HAL_LINKDMA(&hsd, hdmarx, hdma_sdio);
    __HAL_LINKDMA(&hsd, hdmatx, hdma_sdio);

@@ -182,6 +182,7 @@ void TFT_FSMC::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t cou
  DMAtx.Init.PeriphInc = memoryIncrease;
  HAL_DMA_Init(&DMAtx);
  HAL_DMA_Start(&DMAtx, (uint32_t)data, (uint32_t)&(LCD->RAM), count);
+  TERN_(TFT_SHARED_IO, while (isBusy()));
 }

 void TFT_FSMC::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) {
@@ -337,7 +337,7 @@ void TFT_SPI::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t coun
    SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN);   // Enable Tx DMA Request
  #endif

-  TERN_(TFT_SHARED_IO, while (isBusy()) { /* nada */ });
+  TERN_(TFT_SHARED_IO, while (isBusy()));
 }

 void TFT_SPI::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) {
@@ -25,8 +25,8 @@
 * STM32 LCD-specific defines
 */

-uint8_t u8g_com_std_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);         // See U8glib-HAL
-uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);  // See U8glib-HAL
+uint8_t u8g_com_HAL_STM32_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);   // u8g_com_stm32duino_swspi.cpp
+#define U8G_COM_HAL_SW_SPI_FN u8g_com_HAL_STM32_sw_spi_fn

-#define U8G_COM_HAL_SW_SPI_FN u8g_com_std_sw_spi_fn
+uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);  // See U8glib-HAL
 #define U8G_COM_HAL_HW_SPI_FN u8g_com_stm32duino_hw_spi_fn
@@ -118,14 +118,14 @@
  #endif
 #endif

-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL UsbSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 1, NUM_UARTS)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
+#ifdef MMU_SERIAL_PORT
+  #if MMU_SERIAL_PORT == -1
+    #define MMU_SERIAL UsbSerial
+  #elif WITHIN(MMU_SERIAL_PORT, 1, NUM_UARTS)
+    #define MMU_SERIAL MSERIAL(MMU_SERIAL_PORT)
  #else
-    #define MMU2_SERIAL MSERIAL(1) // dummy port
-    static_assert(false, "MMU2_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ". You can also use -1 if the board supports Native USB.")
+    #define MMU_SERIAL MSERIAL(1) // dummy port
+    static_assert(false, "MMU_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ". You can also use -1 if the board supports Native USB.")
  #endif
 #endif

@@ -138,16 +138,27 @@
    #define LCD_SERIAL MSERIAL(1) // dummy port
    static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ". You can also use -1 if the board supports Native USB.")
  #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
    #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
  #endif
 #endif

+#ifdef RS485_SERIAL_PORT
+  #if RS485_SERIAL_PORT == -1
+    #define RS485_SERIAL UsbSerial
+  #elif WITHIN(RS485_SERIAL_PORT, 1, NUM_UARTS)
+    #define RS485_SERIAL MSERIAL(RS485_SERIAL_PORT)
+  #else
+    #define RS485_SERIAL MSERIAL(1) // dummy port
+    static_assert(false, "RS485_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ".")
+  #endif
+#endif
+
 /**
 * TODO: review this to return 1 for pins that are not analog input
 */
 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) (p)
+  #define analogInputToDigitalPin(p) pin_t(p)
 #endif

 #ifndef digitalPinHasPWM
@@ -1,56 +0,0 @@
-from __future__ import print_function
-import sys
-
-#dynamic build flags for generic compile options
-if __name__ == "__main__":
-  args = " ".join([ "-std=gnu++14",
-                    "-Os",
-                    "-mcpu=cortex-m3",
-                    "-mthumb",
-
-                    "-fsigned-char",
-                    "-fno-move-loop-invariants",
-                    "-fno-strict-aliasing",
-                    "-fsingle-precision-constant",
-
-                    "--specs=nano.specs",
-                    "--specs=nosys.specs",
-
-                    "-IMarlin/src/HAL/STM32F1",
-
-                    "-MMD",
-                    "-MP",
-                    "-DTARGET_STM32F1"
-                  ])
-
-  for i in range(1, len(sys.argv)):
-    args += " " + sys.argv[i]
-
-  print(args)
-
-# extra script for linker options
-else:
-  import pioutil
-  if pioutil.is_pio_build():
-    from SCons.Script import DefaultEnvironment
-    env = DefaultEnvironment()
-    env.Append(
-      ARFLAGS=["rcs"],
-
-      ASFLAGS=["-x", "assembler-with-cpp"],
-
-      CXXFLAGS=[
-        "-fabi-version=0",
-        "-fno-use-cxa-atexit",
-        "-fno-threadsafe-statics"
-      ],
-      LINKFLAGS=[
-        "-Os",
-        "-mcpu=cortex-m3",
-        "-ffreestanding",
-        "-mthumb",
-        "--specs=nano.specs",
-        "--specs=nosys.specs",
-        "-u_printf_float",
-      ],
-    )
@@ -89,7 +89,7 @@ static inline uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, c
 }

 static void u8g_sw_spi_shift_out(uint8_t val) {
-  #if ENABLED(FYSETC_MINI_12864)
+  #if U8G_SPI_USE_MODE_3
    swSpiTransfer_mode_3(val, SPI_speed);
  #else
    swSpiTransfer_mode_0(val, SPI_speed);
@@ -123,15 +123,15 @@ uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val,
      break;

    case U8G_COM_MSG_CHIP_SELECT:
-      #if ENABLED(FYSETC_MINI_12864) // This LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {               // SCK idle state needs to be set to the proper idle state before
-                                     // the next chip select goes active
-          WRITE(DOGLCD_SCK, HIGH);   // Set SCK to mode 3 idle state before CS goes active
+      #if U8G_SPI_USE_MODE_3        // This LCD SPI is running mode 3 while SD card is running mode 0
+        if (arg_val) {              // SCK idle state needs to be set to the proper idle state before
+                                    //  the next chip select goes active
+          WRITE(DOGLCD_SCK, HIGH);  // Set SCK to mode 3 idle state before CS goes active
          WRITE(DOGLCD_CS, LOW);
        }
        else {
          WRITE(DOGLCD_CS, HIGH);
-          WRITE(DOGLCD_SCK, LOW);  // Set SCK to mode 0 idle state after CS goes inactive
+          WRITE(DOGLCD_SCK, LOW);   // Set SCK to mode 0 idle state after CS goes inactive
        }
      #else
        WRITE(DOGLCD_CS, !arg_val);
@@ -70,6 +70,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -39,12 +39,12 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS];

 #define NUM_DIGITAL_PINS BOARD_NR_GPIO_PINS
 #define NUMBER_PINS_TOTAL BOARD_NR_GPIO_PINS
-#define VALID_PIN(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS)
-#define GET_ARRAY_PIN(p) pin_t(pin_array[p].pin)
+#define isValidPin(pin) (pin >= 0 && pin < BOARD_NR_GPIO_PINS)
+#define getPinByIndex(p) pin_t(pin_array[p].pin)
 #define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), DIGITAL_PIN_TO_ANALOG_PIN(pin)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
+#define printPinNumber(p) do{ sprintf_P(buffer, PSTR("%3hd "), int16_t(p)); SERIAL_ECHO(buffer); }while(0)
+#define printPinAnalog(p) do{ sprintf_P(buffer, PSTR(" (A%2d)  "), digitalPinToAnalogIndex(pin)); SERIAL_ECHO(buffer); }while(0)
+#define printPinNameByIndex(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
 #define MULTI_NAME_PAD 21 // space needed to be pretty if not first name assigned to a pin

 // pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
@@ -52,10 +52,10 @@ extern const stm32_pin_info PIN_MAP[BOARD_NR_GPIO_PINS];
  #define M43_NEVER_TOUCH(Q) (Q >= 9 && Q <= 12) // SERIAL/USB pins PA9(TX) PA10(RX)
 #endif

-int8_t get_pin_mode(const pin_t pin) { return VALID_PIN(pin) ? _GET_MODE(pin) : -1; }
+int8_t get_pin_mode(const pin_t pin) { return isValidPin(pin) ? _GET_MODE(pin) : -1; }

-pin_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
-  if (!VALID_PIN(pin)) return -1;
+int8_t digitalPinToAnalogIndex(const pin_t pin) {
+  if (!isValidPin(pin)) return -1;
  pin_t adc_channel = pin_t(PIN_MAP[pin].adc_channel);
  #ifdef NUM_ANALOG_INPUTS
    if (adc_channel >= NUM_ANALOG_INPUTS) adc_channel = (pin_t)ADCx;
@@ -63,8 +63,8 @@ pin_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
  return adc_channel;
 }

-bool IS_ANALOG(const pin_t pin) {
-  if (!VALID_PIN(pin)) return false;
+bool isAnalogPin(const pin_t pin) {
+  if (!isValidPin(pin)) return false;
  if (PIN_MAP[pin].adc_channel != ADCx) {
    #ifdef NUM_ANALOG_INPUTS
      if (PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS) return false;
@@ -74,13 +74,13 @@ bool IS_ANALOG(const pin_t pin) {
  return false;
 }

-bool GET_PINMODE(const pin_t pin) {
-  return VALID_PIN(pin) && !IS_INPUT(pin);
+bool getValidPinMode(const pin_t pin) {
+  return isValidPin(pin) && !IS_INPUT(pin);
 }

-bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {
-  const pin_t pin = GET_ARRAY_PIN(array_pin);
-  return (!IS_ANALOG(pin)
+bool getPinIsDigitalByIndex(const int16_t array_pin) {
+  const pin_t pin = getPinByIndex(array_pin);
+  return (!isAnalogPin(pin)
    #ifdef NUM_ANALOG_INPUTS
      || PIN_MAP[pin].adc_channel >= NUM_ANALOG_INPUTS
    #endif
@@ -89,7 +89,7 @@ bool GET_ARRAY_IS_DIGITAL(const int16_t array_pin) {

 #include "../../inc/MarlinConfig.h" // Allow pins/pins.h to set density

-void pwm_details(const pin_t pin) {
+void printPinPWM(const pin_t pin) {
  if (PWM_PIN(pin)) {
    timer_dev * const tdev = PIN_MAP[pin].timer_device;
    const uint8_t channel = PIN_MAP[pin].timer_channel;
@@ -111,7 +111,7 @@ void pwm_details(const pin_t pin) {

 bool pwm_status(const pin_t pin) { return PWM_PIN(pin); }

-void print_port(const pin_t pin) {
+void printPinPort(const pin_t pin) {
  const char port = 'A' + char(pin >> 4); // pin div 16
  const int16_t gbit = PIN_MAP[pin].gpio_bit;
  char buffer[8];
@@ -25,7 +25,7 @@
 * STM32F1 (Maple) LCD-specific defines
 */

-uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
+uint8_t u8g_com_HAL_STM32F1_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr); // u8g_com_stm32duino_swspi.cpp
 uint8_t u8g_com_stm32duino_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);  // See U8glib-HAL

 #define U8G_COM_HAL_SW_SPI_FN     u8g_com_HAL_STM32F1_sw_spi_fn
@@ -98,7 +98,7 @@ uint32_t __get_PRIMASK(void); // CMSIS
 // ------------------------

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif

 #define HAL_ADC_VREF_MV   3300
@@ -64,6 +64,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -41,7 +41,7 @@ typedef uint32_t hal_timer_t;
 #define FTM0_TIMER_PRESCALE_BITS 0b011
 #define FTM1_TIMER_PRESCALE_BITS 0b010

-#define FTM0_TIMER_RATE (F_BUS / (FTM0_TIMER_PRESCALE)) // 60MHz / 8 = 7500kHz
+#define FTM0_TIMER_RATE (F_BUS / (FTM0_TIMER_PRESCALE)) // 60MHz / 8 = 7.5MHz
 #define FTM1_TIMER_RATE (F_BUS / (FTM1_TIMER_PRESCALE)) // 60MHz / 4 = 15MHz

 #define HAL_TIMER_RATE         (FTM0_TIMER_RATE)
@@ -103,7 +103,7 @@ typedef int8_t pin_t;
 // ------------------------

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif

 #define HAL_ADC_VREF_MV   3300
@@ -63,6 +63,7 @@ void setup_endstop_interrupts() {
  TERN_(USE_Z4_MAX,      _ATTACH(Z4_MAX_PIN));
  TERN_(USE_Z4_MIN,      _ATTACH(Z4_MIN_PIN));
  TERN_(USE_Z_MIN_PROBE, _ATTACH(Z_MIN_PROBE_PIN));
+  TERN_(USE_CALIBRATION, _ATTACH(CALIBRATION_PIN));
  TERN_(USE_I_MAX,       _ATTACH(I_MAX_PIN));
  TERN_(USE_I_MIN,       _ATTACH(I_MIN_PIN));
  TERN_(USE_J_MAX,       _ATTACH(J_MAX_PIN));
@@ -53,9 +53,9 @@
  #define TPM1_CH1_PIN 17
 #endif

-#define IS_ANALOG(P) ((P) >= analogInputToDigitalPin(0) && (P) <= analogInputToDigitalPin(9)) || ((P) >= analogInputToDigitalPin(12) && (P) <= analogInputToDigitalPin(20))
+#define isAnalogPin(P) ((P) >= analogInputToDigitalPin(0) && (P) <= analogInputToDigitalPin(9)) || ((P) >= analogInputToDigitalPin(12) && (P) <= analogInputToDigitalPin(20))

-void print_analog_pin(char buffer[], int8_t pin) {
+void printAnalogPin(char buffer[], int8_t pin) {
  if (pin <= 23)      sprintf_P(buffer, PSTR("(A%2d)  "), int(pin - 14));
  else if (pin <= 39) sprintf_P(buffer, PSTR("(A%2d)  "), int(pin - 19));
 }
@@ -108,4 +108,4 @@ bool pwm_status(int8_t pin) {
  SERIAL_ECHOPGM("  ");
 }

-void pwm_details(uint8_t pin) { /* TODO */ }
+void printPinPWM(uint8_t pin) { /* TODO */ }
@@ -133,7 +133,7 @@ typedef int8_t pin_t;
 // ------------------------

 #ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) ((p < 12U) ? (p) + 54U : -1)
+  #define analogInputToDigitalPin(p) pin_t((p < 12U) ? (p) + 54U : -1)
 #endif

 #define HAL_ADC_VREF_MV   3300
--- a/Show More
+++ b/Show More