move G29 stuff to #27146

Marlin/Version.h

@@ -41,7 +41,7 @@
  * here we define this default string as the date where the latest release
  * version was tagged.
  */
-//#define STRING_DISTRIBUTION_DATE "2024-05-27"
+//#define STRING_DISTRIBUTION_DATE "2024-05-29"
 
 /**
  * Defines a generic printer name to be output to the LCD after booting Marlin.

Marlin/src/HAL/AVR/HAL.h

@@ -141,7 +141,7 @@ typedef Servo hal_servo_t;
     #error "LCD_SERIAL_PORT must be from 0 to 3."
   #endif
   #define LCD_SERIAL lcdSerial
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.get_tx_buffer_free()
   #endif
 #endif

Marlin/src/HAL/AVR/MarlinSerial.cpp

@@ -629,7 +629,7 @@ MSerialT1 customizedSerial1(MSerialT1::HasEmergencyParser);
   template class MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> >;
   MSerialLCD lcdSerial(MSerialLCD::HasEmergencyParser);
 
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     template<typename Cfg>
     typename MarlinSerial<Cfg>::ring_buffer_pos_t MarlinSerial<Cfg>::get_tx_buffer_free() {
       const ring_buffer_pos_t t = tx_buffer.tail,  // next byte to send.

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -205,7 +205,7 @@
     static ring_buffer_pos_t available();
     static void write(const uint8_t c);
     static void flushTX();
-    #if HAS_DGUS_LCD
+    #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
       static ring_buffer_pos_t get_tx_buffer_free();
     #endif
 

Marlin/src/HAL/LPC1768/HAL.h

@@ -100,7 +100,7 @@ extern DefaultSerial1 USBSerial;
   #else
     #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.available()
   #endif
 #endif

Marlin/src/HAL/STM32/HAL.h

@@ -112,7 +112,7 @@
   #else
     #error "LCD_SERIAL_PORT must be from 1 to 9, or -1 for Native USB."
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
   #endif
 #endif

Marlin/src/HAL/STM32F1/HAL.h

@@ -138,7 +138,7 @@
     #define LCD_SERIAL MSERIAL(1) // dummy port
     static_assert(false, "LCD_SERIAL_PORT must be from 1 to " STRINGIFY(NUM_UARTS) ". You can also use -1 if the board supports Native USB.")
   #endif
-  #if HAS_DGUS_LCD
+  #if ANY(HAS_DGUS_LCD, EXTENSIBLE_UI)
     #define LCD_SERIAL_TX_BUFFER_FREE() LCD_SERIAL.availableForWrite()
   #endif
 #endif

Marlin/src/core/macros.h

@@ -197,8 +197,8 @@
 #define ENABLED(V...)       DO(ENA,&&,V)
 #define DISABLED(V...)      DO(DIS,&&,V)
 #define ANY(V...)          !DISABLED(V)
-#define ALL                 ENABLED
-#define NONE                DISABLED
+#define ALL(V...)           ENABLED(V)
+#define NONE(V...)          DISABLED(V)
 #define COUNT_ENABLED(V...) DO(ENA,+,V)
 #define MANY(V...)          (COUNT_ENABLED(V) > 1)
 
@@ -630,7 +630,7 @@
 #define DEFER4(M) M EMPTY EMPTY EMPTY EMPTY()()()()
 
 // Force define expansion
-#define EVAL           EVAL16
+#define EVAL(V...)     EVAL16(V)
 #define EVAL4096(V...) EVAL2048(EVAL2048(V))
 #define EVAL2048(V...) EVAL1024(EVAL1024(V))
 #define EVAL1024(V...) EVAL512(EVAL512(V))

Marlin/src/gcode/probe/G30.cpp

@@ -34,7 +34,7 @@
   #include "../../feature/probe_temp_comp.h"
 #endif
 
-#if ANY(DWIN_LCD_PROUI, DWIN_CREALITY_LCD_JYERSUI)
+#if ANY(DWIN_CREALITY_LCD_JYERSUI, EXTENSIBLE_UI)
   #define VERBOSE_SINGLE_PROBE
 #endif
 

Marlin/src/inc/Version.h

@@ -42,7 +42,7 @@
  * version was tagged.
  */
 #ifndef STRING_DISTRIBUTION_DATE
-  #define STRING_DISTRIBUTION_DATE "2024-05-27"
+  #define STRING_DISTRIBUTION_DATE "2024-05-29"
 #endif
 
 /**

Marlin/src/lcd/extui/ui_api.cpp

@@ -765,6 +765,24 @@ namespace ExtUI {
     }
   #endif
 
+  #if HAS_SHAPING
+    float getShapingZeta(const axis_t axis) {
+      return stepper.get_shaping_damping_ratio(AxisEnum(axis));
+    }
+    void setShapingZeta(const float zeta, const axis_t axis) {
+      if (!WITHIN(zeta, 0, 1)) return;
+      stepper.set_shaping_damping_ratio(AxisEnum(axis), zeta);
+    }
+    float getShapingFrequency(const axis_t axis) {
+      return stepper.get_shaping_frequency(AxisEnum(axis));
+    }
+    void setShapingFrequency(const float freq, const axis_t axis) {
+      constexpr float min_freq = float(uint32_t(STEPPER_TIMER_RATE) / 2) / shaping_time_t(-2);
+      if (freq == 0.0f || freq > min_freq)
+        stepper.set_shaping_frequency(AxisEnum(axis), freq);
+    }
+  #endif
+
   #if HAS_JUNCTION_DEVIATION
 
     float getJunctionDeviation_mm() { return planner.junction_deviation_mm; }
@@ -933,6 +951,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t axis) { return probe.offset.pos[axis]; }
     void setProbeOffset_mm(const_float_t val, const axis_t axis) { probe.offset.pos[axis] = val; }
+    probe_limits_t getBedProbeLimits() { return probe_limits_t({ probe.min_x(), probe.min_y(), probe.max_x(), probe.max_y() }); }
   #endif
 
   #if ENABLED(BACKLASH_GCODE)

Marlin/src/lcd/extui/ui_api.h

@@ -74,6 +74,7 @@ namespace ExtUI {
   #if ENABLED(MPC_AUTOTUNE)
     enum mpcresult_t : uint8_t { MPC_STARTED, MPC_TEMP_ERROR, MPC_INTERRUPTED, MPC_DONE };
   #endif
+  struct probe_limits_t { float xmin, ymin, xmax, ymax; };
 
   constexpr uint8_t extruderCount = EXTRUDERS;
   constexpr uint8_t hotendCount   = HOTENDS;
@@ -327,6 +328,13 @@ namespace ExtUI {
     void setLinearAdvance_mm_mm_s(const_float_t, const extruder_t);
   #endif
 
+  #if HAS_SHAPING
+    float getShapingZeta(const axis_t);
+    void setShapingZeta(const float, const axis_t);
+    float getShapingFrequency(const axis_t);
+    void setShapingFrequency(const float, const axis_t);
+  #endif
+
   // JD or Jerk Control
   #if HAS_JUNCTION_DEVIATION
     float getJunctionDeviation_mm();
@@ -367,6 +375,7 @@ namespace ExtUI {
   #if HAS_BED_PROBE
     float getProbeOffset_mm(const axis_t);
     void setProbeOffset_mm(const_float_t, const axis_t);
+    probe_limits_t getBedProbeLimits();
   #endif
 
   // Backlash Control

buildroot/tests/STM32F103RC_btt_USB

@@ -10,7 +10,7 @@ set -e
 # Build with the default configurations
 #
 restore_configs
-opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 TEMP_SENSOR_SOC 1
+opt_set MOTHERBOARD BOARD_BTT_SKR_MINI_V1_1 SERIAL_PORT 1 SERIAL_PORT_2 -1 TEMP_SENSOR_SOC 100
 exec_test $1 $2 "BigTreeTech SKR Mini v1.1 - SOC Temperature" "$3"
 
 # clean up

ini/samd51.ini

@@ -15,11 +15,12 @@
 [env:SAMD51_grandcentral_m4]
 platform         = atmelsam
 board            = adafruit_grandcentral_m4
-build_flags      = ${common.build_flags} -std=gnu++17
+build_flags      = ${common.build_flags} -std=gnu++17 -DUSE_TINYUSB
 build_unflags    = -std=gnu++11
 build_src_filter = ${common.default_src_filter} +<src/HAL/SAMD51>
 lib_deps         = ${common.lib_deps}
                    SoftwareSerialM
+                   Adafruit TinyUSB Library
 extra_scripts    = ${common.extra_scripts}
                    pre:buildroot/share/PlatformIO/scripts/SAMD51_grandcentral_m4.py
 custom_marlin.HAS_MEDIA = SdFat - Adafruit Fork, Adafruit SPIFlash