Update power.cpp

2024-01-31 08:46:27 -05:00
574 changed files with 5688 additions and 14365 deletions
@@ -0,0 +1,40 @@
+#
+# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
+#
+
+# Number of days of inactivity before a closed issue or pull request is locked
+daysUntilLock: 60
+
+# Skip issues and pull requests created before a given timestamp. Timestamp must
+# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
+skipCreatedBefore: false
+
+# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
+exemptLabels: [ 'no-locking' ]
+
+# Label to add before locking, such as `outdated`. Set to `false` to disable
+lockLabel: false
+
+# Comment to post before locking. Set to `false` to disable
+lockComment: >
+  This thread has been automatically locked since there has not been
+  any recent activity after it was closed. Please open a new issue for
+  related bugs.
+
+# Assign `resolved` as the reason for locking. Set to `false` to disable
+setLockReason: true
+
+# Limit to only `issues` or `pulls`
+# only: issues
+
+# Optionally, specify configuration settings just for `issues` or `pulls`
+# issues:
+#   exemptLabels:
+#     - help-wanted
+#   lockLabel: outdated
+
+# pulls:
+#   daysUntilLock: 30
+
+# Repository to extend settings from
+# _extends: repo
@@ -19,7 +19,7 @@ jobs:
    steps:

    - name: Check out bugfix-2.0.x
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
      with:
        ref: bugfix-2.0.x

@@ -39,7 +39,7 @@ jobs:
        exit 0

    - name: Check out bugfix-2.1.x
-      uses: actions/checkout@v4
+      uses: actions/checkout@v3
      with:
        ref: bugfix-2.1.x

@@ -1,73 +0,0 @@
-#
-# ci-unit-tests.yml
-# Build and execute unit tests to catch functional issues in code
-#
-
-name: CI - Unit Tests
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-  push:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths-ignore:
-    - config/**
-    - data/**
-    - docs/**
-    - '**/*.md'
-
-jobs:
-  # This runs all unit tests as a single job. While it should be possible to break this up into
-  # multiple jobs, they currently run quickly and finish long before the compilation tests.
-  run_unit_tests:
-    name: Unit Test
-    # These tests will only be able to run on the bugfix-2.1.x branch, until the next release
-    # pulls them into additional branches.
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Check out the PR
-      uses: actions/checkout@v4
-
-    - name: Cache pip
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
-
-    - name: Cache PlatformIO
-      uses: actions/cache@v4
-      with:
-        path: ~/.platformio
-        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}
-
-    - name: Select Python 3.9
-      uses: actions/setup-python@v5
-      with:
-        python-version: '3.9'
-        architecture: 'x64'
-
-    - name: Install PlatformIO
-      run: |
-        pip install -U platformio
-        pio upgrade --dev
-        pio pkg update --global
-
-    - name: Run All Unit Tests
-      run: |
-        make unit-test-all-local
@@ -1,51 +0,0 @@
-#
-# ci-validate-pins.yml
-# Validate that all of the pins files are unchanged by pinsformat.py
-#
-
-name: CI - Validate Pins Files
-
-on:
-  pull_request:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths:
-    - 'Marlin/src/pins/*/**'
-  push:
-    branches:
-    - bugfix-2.1.x
-    # Cannot be enabled on 2.1.x until it contains the unit test framework
-    #- 2.1.x
-    paths:
-    - 'Marlin/src/pins/*/**'
-
-jobs:
-  validate_pins_files:
-    name: Validate Pins Files
-    if: github.repository == 'MarlinFirmware/Marlin'
-
-    runs-on: ubuntu-latest
-
-    steps:
-    - name: Check out the PR
-      uses: actions/checkout@v4
-
-    - name: Cache pip
-      uses: actions/cache@v4
-      with:
-        path: ~/.cache/pip
-        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
-        restore-keys: |
-          ${{ runner.os }}-pip-
-
-    - name: Select Python 3.9
-      uses: actions/setup-python@v5
-      with:
-        python-version: '3.9'
-        architecture: 'x64'
-
-    - name: Validate all pins files
-      run: |
-        make validate-pins -j
@@ -32,7 +32,7 @@ jobs:
          - "Needs: Work"

    steps:
-      - uses: actions/checkout@v4
+      - uses: actions/checkout@v3
      - name: Remove Labels
        uses: actions-ecosystem/action-remove-labels@v1
        with:
@@ -17,7 +17,7 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-    - uses: actions/stale@v9
+    - uses: actions/stale@v8
      with:
        repo-token: ${{ secrets.GITHUB_TOKEN }}
        stale-issue-message: |
@@ -17,15 +17,15 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-    - uses: dessant/lock-threads@v5
+    - uses: dessant/lock-threads@v2
      with:
        github-token: ${{ github.token }}
        process-only: 'issues'
-        issue-inactive-days: '60'
-        exclude-issue-created-before: ''
-        exclude-any-issue-labels: 'no-locking'
-        add-issue-labels: ''
-        issue-comment: >
+        issue-lock-inactive-days: '60'
+        issue-exclude-created-before: ''
+        issue-exclude-labels: 'no-locking'
+        issue-lock-labels: ''
+        issue-lock-comment: >
          This issue has been automatically locked since there
          has not been any recent activity after it was closed.
          Please open a new issue for related bugs.
@@ -1,9 +1,9 @@
 #
-# ci-build-tests.yml
+# test-builds.yml
 # Do test builds to catch compile errors
 #

-name: CI - Build Tests
+name: CI

 on:
  pull_request:
@@ -14,8 +14,6 @@ on:
    - config/**
    - data/**
    - docs/**
-    - test/**
-    - Marlin/tests/**
    - '**/*.md'
  push:
    branches:
@@ -25,13 +23,11 @@ on:
    - config/**
    - data/**
    - docs/**
-    - test/**
-    - Marlin/tests/**
    - '**/*.md'

 jobs:
  test_builds:
-    name: Build Test
+    name: Run All Tests
    if: github.repository == 'MarlinFirmware/Marlin'

    runs-on: ubuntu-latest
@@ -156,7 +152,7 @@ jobs:
      uses: actions/checkout@v4

    - name: Cache pip
-      uses: actions/cache@v4
+      uses: actions/cache@v3
      with:
        path: ~/.cache/pip
        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
@@ -164,13 +160,13 @@ jobs:
          ${{ runner.os }}-pip-

    - name: Cache PlatformIO
-      uses: actions/cache@v4
+      uses: actions/cache@v3
      with:
        path: ~/.platformio
        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}

    - name: Select Python 3.9
-      uses: actions/setup-python@v5
+      uses: actions/setup-python@v4
      with:
        python-version: '3.9'
        architecture: 'x64'
@@ -2,23 +2,17 @@ SCRIPTS_DIR := buildroot/share/scripts
 CONTAINER_RT_BIN := docker
 CONTAINER_RT_OPTS := --rm -v $(PWD):/code -v platformio-cache:/root/.platformio
 CONTAINER_IMAGE := marlin-dev
-UNIT_TEST_CONFIG ?= default

 help:
 	@echo "Tasks for local development:"
 	@echo "make marlin                    : Build marlin for the configured board"
-	@echo "make format-pins -j            : Reformat all pins files (-j for parallel execution)"
-	@echo "make validate-pins -j          : Validate all pins files, fails if any require reformatting"
+	@echo "make format-pins               : Reformat all pins files"
 	@echo "make tests-single-ci           : Run a single test from inside the CI"
 	@echo "make tests-single-local        : Run a single test locally"
 	@echo "make tests-single-local-docker : Run a single test locally, using docker"
 	@echo "make tests-all-local           : Run all tests locally"
 	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
-	@echo "make unit-test-single-local    : Run unit tests for a single config locally"
-	@echo "make unit-test-single-local-docker : Run unit tests for a single config locally, using docker"
-	@echo "make unit-test-all-local      : Run all code tests locally"
-	@echo "make unit-test-all-local-docker : Run all code tests locally, using docker"
-	@echo "make setup-local-docker        : Setup local docker using buildx"
+	@echo "make setup-local-docker        : Build the local docker image"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -28,9 +22,6 @@ help:
 	@echo "                       run on GitHub CI"
 	@echo "  ONLY_TEST            Limit tests to only those that contain this, or"
 	@echo "                       the index of the test (1-based)"
-	@echo "  UNIT_TEST_CONFIG     Set the name of the config from the test folder, without"
-	@echo "                       the leading number. Default is 'default'". Used with the
-	@echo "                       unit-test-single-* tasks"
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
@@ -52,53 +43,23 @@ tests-single-local:
 tests-single-local-docker:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"

 tests-all-local:
-	@python -c "import yaml" 2>/dev/null || (echo 'pyyaml module is not installed. Install it with "python -m pip install pyyaml"' && exit 1)
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
-	  && for TEST_TARGET in $$(python $(SCRIPTS_DIR)/get_test_targets.py) ; do \
-	    if [ "$$TEST_TARGET" = "linux_native" ] && [ "$$(uname)" = "Darwin" ]; then \
-	      echo "Skipping tests for $$TEST_TARGET on macOS" ; \
-	      continue ; \
-	    fi ; \
-	    echo "Running tests for $$TEST_TARGET" ; \
-	    run_tests . $$TEST_TARGET || exit 1 ; \
-	    sleep 5; \
-	  done
+	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done

 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) make tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-
-unit-test-single-local:
-	platformio run -t marlin_$(UNIT_TEST_CONFIG) -e linux_native_test
-
-unit-test-single-local-docker:
-	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-single-local UNIT_TEST_CONFIG=$(UNIT_TEST_CONFIG)
-
-unit-test-all-local:
-	platformio run -t test-marlin -e linux_native_test
-
-unit-test-all-local-docker:
-	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
-	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS)  $(CONTAINER_IMAGE) make unit-test-all-local
+	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)

 setup-local-docker:
-	$(CONTAINER_RT_BIN) buildx build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
+	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .

 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')

-.PHONY: $(PINS) format-pins validate-pins
-
 $(PINS): %:
-	@echo "Formatting $@"
-	@python $(SCRIPTS_DIR)/pinsformat.py $< $@
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@

 format-pins: $(PINS)
-
-validate-pins: format-pins
-	@echo "Validating pins files"
-	@git diff --exit-code || (git status && echo "\nError: Pins files are not formatted correctly. Run \"make format-pins\" to fix.\n" && exit 1)
@@ -61,14 +61,14 @@
 // @section info

 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "InsanityAutomation" // Who made the changes.
+#define STRING_CONFIG_H_AUTHOR "(none, default config)" // Who made the changes.
 //#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)

 // @section machine

 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #define MOTHERBOARD BOARD_EBAB
+  #define MOTHERBOARD BOARD_RAMPS_14_EFB
 #endif

 /**
@@ -79,7 +79,7 @@
 *
 * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
-#define SERIAL_PORT -1
+#define SERIAL_PORT 0

 /**
 * Serial Port Baud Rate
@@ -101,7 +101,7 @@
 * Currently Ethernet (-2) is only supported on Teensy 4.1 boards.
 * :[-2, -1, 0, 1, 2, 3, 4, 5, 6, 7]
 */
-//#define SERIAL_PORT_2 1
+//#define SERIAL_PORT_2 -1
 //#define BAUDRATE_2 250000   // :[2400, 9600, 19200, 38400, 57600, 115200, 250000, 500000, 1000000] Enable to override BAUDRATE

 /**
@@ -116,7 +116,7 @@
 //#define BLUETOOTH

 // Name displayed in the LCD "Ready" message and Info menu
-#define CUSTOM_MACHINE_NAME "FatBoy"
+//#define CUSTOM_MACHINE_NAME "3D Printer"

 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like https://www.uuidgenerator.net/version4
@@ -139,21 +139,21 @@
 *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
 * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
 */
-#define X_DRIVER_TYPE  TMC5160
-#define Y_DRIVER_TYPE  TMC5160
-#define Z_DRIVER_TYPE  TMC5160_STANDALONE
+#define X_DRIVER_TYPE  A4988
+#define Y_DRIVER_TYPE  A4988
+#define Z_DRIVER_TYPE  A4988
 //#define X2_DRIVER_TYPE A4988
-#define Y2_DRIVER_TYPE TMC5160
-#define Z2_DRIVER_TYPE TMC5160_STANDALONE
-#define Z3_DRIVER_TYPE TMC5160_STANDALONE
-#define Z4_DRIVER_TYPE TMC5160_STANDALONE
+//#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
+//#define Z3_DRIVER_TYPE A4988
+//#define Z4_DRIVER_TYPE A4988
 //#define I_DRIVER_TYPE  A4988
 //#define J_DRIVER_TYPE  A4988
 //#define K_DRIVER_TYPE  A4988
 //#define U_DRIVER_TYPE  A4988
 //#define V_DRIVER_TYPE  A4988
 //#define W_DRIVER_TYPE  A4988
-#define E0_DRIVER_TYPE TMC2209
+#define E0_DRIVER_TYPE A4988
 //#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
@@ -399,37 +399,19 @@
  //#define MKS_PWC                 // Using the MKS PWC add-on
  //#define PS_OFF_CONFIRM          // Confirm dialog when power off
  //#define PS_OFF_SOUND            // Beep 1s when power off
-  #define PSU_ACTIVE_STATE HIGH      // Set 'LOW' for ATX, 'HIGH' for X-Box
+  #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box

-  #define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
-  #define PSU_POWERUP_DELAY      750    // (ms) Delay for the PSU to warm up to full power
+  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
  //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay

-  #define PSU_OFF_REDUNDANT             // Second pin for redundant power control
-  //#define PSU_OFF_REDUNDANT_OPPOSING    // Redundant pin works opposite standard pin
-  #define PS_ON_PIN                  P4_28  // Redundant Pin
-  #define PS_ON1_PIN                 P1_03  // Redundant Pin
-
-  #define PS_ON_EDM_PIN             P4_29    // EDM Pins to monitor feedback on external power control relay. Fault on mismatch.
-  #define PS_ON1_EDM_PIN            P1_17
-  #define PS_EDM_RESPONSE       1000     // Time in MS to allow for relay action
-
-  #define PSU_OFF_REDUNDANT             // Second pin for redundant power control
-  //#define PSU_OFF_REDUNDANT_OPPOSING    // Redundant pin works opposite standard pin
-  #define PS_ON_PIN                  P4_28  // Redundant Pin
-  #define PS_ON1_PIN                 P1_03  // Redundant Pin
-
-  #define PS_ON_EDM_PIN             P4_29    // EDM Pins to monitor feedback on external power control relay. Fault on mismatch.
-  #define PS_ON1_EDM_PIN            P1_17
-  #define PS_EDM_RESPONSE       1000     // Time in MS to allow for relay action
-
  //#define POWER_OFF_TIMER               // Enable M81 D<seconds> to power off after a delay
  //#define POWER_OFF_WAIT_FOR_COOLDOWN   // Enable M81 S to power off only after cooldown

  //#define PSU_POWERUP_GCODE  "M355 S1"  // G-code to run after power-on (e.g., case light on)
  //#define PSU_POWEROFF_GCODE "M355 S0"  // G-code to run before power-off (e.g., case light off)

-  #define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
+  //#define AUTO_POWER_CONTROL      // Enable automatic control of the PS_ON pin
  #if ENABLED(AUTO_POWER_CONTROL)
    #define AUTO_POWER_FANS           // Turn on PSU for fans
    #define AUTO_POWER_E_FANS         // Turn on PSU for E Fans
@@ -570,7 +552,7 @@
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 11
+#define TEMP_SENSOR_BED 1
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 #define TEMP_SENSOR_COOLER 0
@@ -646,7 +628,7 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 300
+#define HEATER_0_MAXTEMP 275
 #define HEATER_1_MAXTEMP 275
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
@@ -654,7 +636,7 @@
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      120
+#define BED_MAXTEMP      150
 #define CHAMBER_MAXTEMP  60

 /**
@@ -663,7 +645,7 @@
 * (especially before PID tuning). Setting the target temperature too close to MAXTEMP guarantees
 * a MAXTEMP shutdown! Use these values to forbid temperatures being set too close to MAXTEMP.
 */
-#define HOTEND_OVERSHOOT 10   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
+#define HOTEND_OVERSHOOT 15   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
 #define BED_OVERSHOOT    10   // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
 #define COOLER_OVERSHOOT  2   // (°C) Forbid temperatures closer than OVERSHOOT

@@ -766,7 +748,7 @@
 * When set to any value below 255, enables a form of PWM to the bed that acts like a divider
 * so don't use it unless you are OK with PWM on your bed. (See the comment on enabling PIDTEMPBED)
 */
-#define MAX_BED_POWER 180 // limits duty cycle to bed; 255=full current
+#define MAX_BED_POWER 255 // limits duty cycle to bed; 255=full current

 /**
 * PID Bed Heating
@@ -780,7 +762,7 @@
 *
 * With this option disabled, bang-bang will be used. BED_LIMIT_SWITCHING enables hysteresis.
 */
-#define PIDTEMPBED
+//#define PIDTEMPBED

 #if ENABLED(PIDTEMPBED)
  //#define MIN_BED_POWER 0
@@ -851,8 +833,8 @@
  #define PID_FUNCTIONAL_RANGE 10 // If the temperature difference between the target temperature and the actual temperature
                                  // is more than PID_FUNCTIONAL_RANGE then the PID will be shut off and the heater will be set to min/max.

-  #define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
-  #define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
+  //#define PID_EDIT_MENU         // Add PID editing to the "Advanced Settings" menu. (~700 bytes of flash)
+  //#define PID_AUTOTUNE_MENU     // Add PID auto-tuning to the "Advanced Settings" menu. (~250 bytes of flash)
 #endif

 // @section safety
@@ -1186,9 +1168,9 @@
 * Endstop "Hit" State
 * Set to the state (HIGH or LOW) that applies to each endstop.
 */
-#define X_MIN_ENDSTOP_HIT_STATE LOW
+#define X_MIN_ENDSTOP_HIT_STATE HIGH
 #define X_MAX_ENDSTOP_HIT_STATE HIGH
-#define Y_MIN_ENDSTOP_HIT_STATE LOW
+#define Y_MIN_ENDSTOP_HIT_STATE HIGH
 #define Y_MAX_ENDSTOP_HIT_STATE HIGH
 #define Z_MIN_ENDSTOP_HIT_STATE HIGH
 #define Z_MAX_ENDSTOP_HIT_STATE HIGH
@@ -1252,7 +1234,7 @@
 * Override with M92 (when enabled below)
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_AXIS_STEPS_PER_UNIT   { 40, 40, 200, 425 }
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }

 /**
 * Enable support for M92. Disable to save at least ~530 bytes of flash.
@@ -1277,7 +1259,7 @@
 * Override with M201
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
-#define DEFAULT_MAX_ACCELERATION      { 12000, 12000, 500, 10000 }
+#define DEFAULT_MAX_ACCELERATION      { 3000, 3000, 100, 10000 }

 //#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
@@ -1292,9 +1274,9 @@
 *   M204 R    Retract Acceleration
 *   M204 T    Travel Acceleration
 */
-#define DEFAULT_ACCELERATION          7000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
 #define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   7000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves

 /**
 * Default Jerk limits (mm/s)
@@ -1309,6 +1291,7 @@
  #define DEFAULT_XJERK 10.0
  #define DEFAULT_YJERK 10.0
  #define DEFAULT_ZJERK  0.3
+  #define DEFAULT_EJERK  5.0
  //#define DEFAULT_IJERK  0.3
  //#define DEFAULT_JJERK  0.3
  //#define DEFAULT_KJERK  0.3
@@ -1324,8 +1307,6 @@
  #endif
 #endif

-#define DEFAULT_EJERK    5.0  // May be used by Linear Advance
-
 /**
 * Junction Deviation Factor
 *
@@ -1347,12 +1328,7 @@
 *
 * See https://github.com/synthetos/TinyG/wiki/Jerk-Controlled-Motion-Explained
 */
-#define S_CURVE_ACCELERATION
-#if ENABLED(S_CURVE_ACCELERATION)
-  // Uncomment to use 4th instead of 6th order motion curve
-  #define S_CURVE_FACTOR 0.35    // Initial and final acceleration factor, ideally 0.1 to 0.4
-                                   // Shouldn't generally require tuning
-#endif
+//#define S_CURVE_ACCELERATION

 //===========================================================================
 //============================= Z Probe Options =============================
@@ -1368,10 +1344,10 @@
 * The probe replaces the Z-MIN endstop and is used for Z homing.
 * (Automatically enables USE_PROBE_FOR_Z_HOMING.)
 */
-//#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN
+#define Z_MIN_PROBE_USES_Z_MIN_ENDSTOP_PIN

 // Force the use of the probe for Z-axis homing
-#define USE_PROBE_FOR_Z_HOMING
+//#define USE_PROBE_FOR_Z_HOMING

 /**
 * Z_MIN_PROBE_PIN
@@ -1428,7 +1404,7 @@
 /**
 * The BLTouch probe uses a Hall effect sensor and emulates a servo.
 */
-#define BLTOUCH
+//#define BLTOUCH

 /**
 * MagLev V4 probe by MDD
@@ -1470,6 +1446,17 @@
  //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point
 #endif

+/**
+ * BIQU MicroProbe
+ *
+ * A lightweight, solenoid-driven probe.
+ * For information about this sensor https://github.com/bigtreetech/MicroProbe
+ *
+ * Also requires: PROBE_ENABLE_DISABLE
+ */
+//#define BIQU_MICROPROBE_V1  // Triggers HIGH
+//#define BIQU_MICROPROBE_V2  // Triggers LOW
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

@@ -1658,7 +1645,7 @@
 * A total of 2 does fast/slow probes with a weighted average.
 * A total of 3 or more adds more slow probes, taking the average.
 */
-#define MULTIPLE_PROBING 2
+//#define MULTIPLE_PROBING 2
 //#define EXTRA_PROBING    1

 /**
@@ -1681,7 +1668,7 @@
 #define Z_PROBE_ERROR_TOLERANCE     3 // (mm) Tolerance for early trigger (<= -probe.offset.z + ZPET)
 //#define Z_AFTER_PROBING           5 // (mm) Z position after probing is done

-#define Z_PROBE_LOW_POINT          -5 // (mm) Farthest distance below the trigger-point to go before stopping
+#define Z_PROBE_LOW_POINT          -2 // (mm) Farthest distance below the trigger-point to go before stopping

 // For M851 provide ranges for adjusting the X, Y, and Z probe offsets
 //#define PROBE_OFFSET_XMIN -50   // (mm)
@@ -1760,9 +1747,9 @@
 // @section motion

 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#define INVERT_X_DIR true
-#define INVERT_Y_DIR false
-#define INVERT_Z_DIR true
+#define INVERT_X_DIR false
+#define INVERT_Y_DIR true
+#define INVERT_Z_DIR false
 //#define INVERT_I_DIR false
 //#define INVERT_J_DIR false
 //#define INVERT_K_DIR false
@@ -1832,8 +1819,8 @@
 // @section geometry

 // The size of the printable area
-#define X_BED_SIZE 1200
-#define Y_BED_SIZE 1200
+#define X_BED_SIZE 200
+#define Y_BED_SIZE 200

 // Travel limits (linear=mm, rotational=°) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1841,7 +1828,7 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#define Z_MAX_POS 1000
+#define Z_MAX_POS 200
 //#define I_MIN_POS 0
 //#define I_MAX_POS 50
 //#define J_MIN_POS 0
@@ -1893,7 +1880,7 @@
 #endif

 #if ANY(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-  #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif

 /**
@@ -2052,7 +2039,7 @@
 */
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
-#define AUTO_BED_LEVELING_BILINEAR
+//#define AUTO_BED_LEVELING_BILINEAR
 //#define AUTO_BED_LEVELING_UBL
 //#define MESH_BED_LEVELING

@@ -2060,14 +2047,14 @@
 * Commands to execute at the end of G29 probing.
 * Useful to retract or move the Z probe out of the way.
 */
-//#define Z_PROBE_END_SCRIPT "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"
+//#define EVENT_GCODE_AFTER_G29 "G1 Z10 F12000\nG1 X15 Y330\nG1 Z0.5\nG1 Z10"

 /**
 * Normally G28 leaves leveling disabled on completion. Enable one of
 * these options to restore the prior leveling state or to always enable
 * leveling immediately after G28.
 */
-#define RESTORE_LEVELING_AFTER_G28
+//#define RESTORE_LEVELING_AFTER_G28
 //#define ENABLE_LEVELING_AFTER_G28

 /**
@@ -2082,7 +2069,7 @@
 /**
 * Enable detailed logging of G28, G29, M48, etc.
 * Turn on with the command 'M111 S32'.
- * NOTE: Requires a lot of PROGMEM!
+ * NOTE: Requires a lot of flash!
 */
 //#define DEBUG_LEVELING_FEATURE

@@ -2099,7 +2086,7 @@
   */
  #define ENABLE_LEVELING_FADE_HEIGHT
  #if ENABLED(ENABLE_LEVELING_FADE_HEIGHT)
-    #define DEFAULT_LEVELING_FADE_HEIGHT 0.0 // (mm) Default fade height.
+    #define DEFAULT_LEVELING_FADE_HEIGHT 10.0 // (mm) Default fade height.
  #endif

  /**
@@ -2113,7 +2100,7 @@
  /**
   * Enable the G26 Mesh Validation Pattern tool.
   */
-  #define G26_MESH_VALIDATION
+  //#define G26_MESH_VALIDATION
  #if ENABLED(G26_MESH_VALIDATION)
    #define MESH_TEST_NOZZLE_SIZE    0.4  // (mm) Diameter of primary nozzle.
    #define MESH_TEST_LAYER_HEIGHT   0.2  // (mm) Default layer height for G26.
@@ -2129,7 +2116,7 @@
 #if ANY(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)

  // Set the number of grid points per dimension.
-  #define GRID_MAX_POINTS_X 15
+  #define GRID_MAX_POINTS_X 3
  #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X

  // Probe along the Y axis, advancing X after each column
@@ -2139,7 +2126,7 @@

    // Beyond the probed grid, continue the implied tilt?
    // Default is to maintain the height of the nearest edge.
-    #define EXTRAPOLATE_BEYOND_GRID
+    //#define EXTRAPOLATE_BEYOND_GRID

    //
    // Subdivision of the grid by Catmull-Rom method.
@@ -2215,12 +2202,12 @@
 * Add a bed leveling sub-menu for ABL or MBL.
 * Include a guided procedure if manual probing is enabled.
 */
-#define LCD_BED_LEVELING
+//#define LCD_BED_LEVELING

 #if ENABLED(LCD_BED_LEVELING)
  #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
-  #define LCD_PROBE_Z_RANGE 8     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
+  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif

 // Add a menu item to move between bed corners for manual bed adjustment
@@ -2282,7 +2269,7 @@
 * - Allows Z homing only when XY positions are known and trusted.
 * - If stepper drivers sleep, XY homing may be required again before Z homing.
 */
-#define Z_SAFE_HOMING
+//#define Z_SAFE_HOMING

 #if ENABLED(Z_SAFE_HOMING)
  #define Z_SAFE_HOMING_X_POINT X_CENTER  // (mm) X point for Z homing
@@ -2369,12 +2356,12 @@
 *   M501 - Read settings from EEPROM. (i.e., Throw away unsaved changes)
 *   M502 - Revert settings to "factory" defaults. (Follow with M500 to init the EEPROM.)
 */
-#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
+//#define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of flash. Disable for release!
-#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
+#define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save flash.
 #define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
-  #define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
+  //#define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
  //#define EEPROM_INIT_NOW   // Init EEPROM on first boot after a new build.
 #endif

@@ -2432,11 +2419,11 @@
 *    P1  Raise the nozzle always to Z-park height.
 *    P2  Raise the nozzle by Z-park amount, limited to Z_MAX_POS.
 */
-#define NOZZLE_PARK_FEATURE
+//#define NOZZLE_PARK_FEATURE

 #if ENABLED(NOZZLE_PARK_FEATURE)
  // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 5 }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MAX_POS - 10), 20 }
  #define NOZZLE_PARK_MOVE          0   // Park motion: 0 = XY Move, 1 = X Only, 2 = Y Only, 3 = X before Y, 4 = Y before X
  #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
  #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
@@ -2659,7 +2646,7 @@
 * SD Card support is disabled by default. If your controller has an SD slot,
 * you must uncomment the following option or it won't work.
 */
-#define SDSUPPORT
+//#define SDSUPPORT

 /**
 * SD CARD: ENABLE CRC
@@ -2739,7 +2726,7 @@
 //
 // Add individual axis homing items (Home X, Home Y, and Home Z) to the LCD menu.
 //
-#define INDIVIDUAL_AXIS_HOMING_MENU
+//#define INDIVIDUAL_AXIS_HOMING_MENU
 //#define INDIVIDUAL_AXIS_HOMING_SUBMENU

 //
@@ -2942,7 +2929,7 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // https://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
+//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER

 //
 // K.3D Full Graphic Smart Controller
@@ -3050,7 +3037,7 @@

 //
 // Factory display for Creality CR-10 / CR-7 / Ender-3
-// https://www.aliexpress.com/item/32833148327.html
+// https://marlinfw.org/docs/hardware/controllers.html#cr10_stockdisplay
 //
 // Connect to EXP1 on RAMPS and compatible boards.
 //
@@ -307,11 +307,11 @@
  #define THERMAL_PROTECTION_PERIOD 40        // (seconds)
  #define THERMAL_PROTECTION_HYSTERESIS 4     // (°C)

-  #define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
+  //#define ADAPTIVE_FAN_SLOWING              // Slow down the part-cooling fan if the temperature drops
  #if ENABLED(ADAPTIVE_FAN_SLOWING)
    //#define REPORT_ADAPTIVE_FAN_SLOWING     // Report fan slowing activity to the console
    #if ANY(MPCTEMP, PIDTEMP)
-      #define TEMP_TUNING_MAINTAIN_FAN      // Don't slow down the fan speed during M303 or M306 T
+      //#define TEMP_TUNING_MAINTAIN_FAN      // Don't slow down the fan speed during M303 or M306 T
    #endif
  #endif

@@ -335,7 +335,7 @@
 * Thermal Protection parameters for the bed are just as above for hotends.
 */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD        90 // (seconds)
+  #define THERMAL_PROTECTION_BED_PERIOD        20 // (seconds)
  #define THERMAL_PROTECTION_BED_HYSTERESIS     2 // (°C)

  /**
@@ -459,7 +459,7 @@
      #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0

    #else
-      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power loss due to cooling = Kf * (fan_speed)
+      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power-loss due to cooling = Kf * (fan_speed)
      #define DEFAULT_Kf 10                              // A constant value added to the PID-tuner
      #define PID_FAN_SCALING_MIN_SPEED 10               // Minimum fan speed at which to enable PID_FAN_SCALING
    #endif
@@ -547,10 +547,10 @@
 * Hotend Idle Timeout
 * Prevent filament in the nozzle from charring and causing a critical jam.
 */
-#define HOTEND_IDLE_TIMEOUT
+//#define HOTEND_IDLE_TIMEOUT
 #if ENABLED(HOTEND_IDLE_TIMEOUT)
-  #define HOTEND_IDLE_TIMEOUT_SEC (30*60)    // (seconds) Time without extruder movement to trigger protection
-  #define HOTEND_IDLE_MIN_TRIGGER   170     // (°C) Minimum temperature to enable hotend protection
+  #define HOTEND_IDLE_TIMEOUT_SEC (5*60)    // (seconds) Time without extruder movement to trigger protection
+  #define HOTEND_IDLE_MIN_TRIGGER   180     // (°C) Minimum temperature to enable hotend protection
  #define HOTEND_IDLE_NOZZLE_TARGET   0     // (°C) Safe temperature for the nozzle after timeout
  #define HOTEND_IDLE_BED_TARGET      0     // (°C) Safe temperature for the bed after timeout
 #endif
@@ -602,8 +602,8 @@
 * gets it spinning reliably for a short time before setting the requested speed.
 * (Does not work on Sanguinololu with FAN_SOFT_PWM.)
 */
-#define FAN_KICKSTART_TIME  100  // (ms)
-#define FAN_KICKSTART_POWER 180  // 64-255
+//#define FAN_KICKSTART_TIME  100  // (ms)
+//#define FAN_KICKSTART_POWER 180  // 64-255

 // Some coolers may require a non-zero "off" state.
 //#define FAN_OFF_PWM  1
@@ -931,7 +931,7 @@
 //#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (linear=mm, rotational=°) Backoff from endstops after homing
 //#define XY_COUNTERPART_BACKOFF_MM 0         // (mm) Backoff X after homing Y, and vice-versa

-#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
+//#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
 //#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
 //#define HOME_Z_FIRST                        // Home Z first. Requires a real endstop (not a probe).
 //#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
@@ -1020,7 +1020,7 @@
 * Z Steppers Auto-Alignment
 * Add the G34 command to align multiple Z steppers using a bed probe.
 */
-#define Z_STEPPER_AUTO_ALIGN
+//#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
  /**
   * Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
@@ -1281,7 +1281,7 @@
 // Backlash Compensation
 // Adds extra movement to axes on direction-changes to account for backlash.
 //
-#define BACKLASH_COMPENSATION
+//#define BACKLASH_COMPENSATION
 #if ENABLED(BACKLASH_COMPENSATION)
  // Define values for backlash distance and correction.
  // If BACKLASH_GCODE is enabled these values are the defaults.
@@ -1296,7 +1296,7 @@
  //#define BACKLASH_SMOOTHING_MM 3 // (mm)

  // Add runtime configuration and tuning of backlash values (M425)
-  #define BACKLASH_GCODE
+  //#define BACKLASH_GCODE

  #if ENABLED(BACKLASH_GCODE)
    // Measure the Z backlash when probing (G29) and set with "M425 Z"
@@ -1342,7 +1342,7 @@
  #define CALIBRATION_NOZZLE_TIP_HEIGHT          1.0  // mm
  #define CALIBRATION_NOZZLE_OUTER_DIAMETER      2.0  // mm

-  // Uncomment to enable reporting (required for "G425 V", but consumes PROGMEM).
+  // Uncomment to enable reporting (required for "G425 V", but consumes flash).
  //#define CALIBRATION_REPORTING

  // The true location and dimension the cube/bolt/washer on the bed.
@@ -1386,7 +1386,7 @@
 * Multi-stepping sends steps in bursts to reduce MCU usage for high step-rates.
 * This allows higher feedrates than the MCU could otherwise support.
 */
-#define MULTISTEPPING_LIMIT   32  //: [1, 2, 4, 8, 16, 32, 64, 128]
+#define MULTISTEPPING_LIMIT   16  //: [1, 2, 4, 8, 16, 32, 64, 128]

 /**
 * Adaptive Step Smoothing increases the resolution of multi-axis moves, particularly at step frequencies
@@ -1394,7 +1394,7 @@
 * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
 * lowest stepping frequencies.
 */
-#define ADAPTIVE_STEP_SMOOTHING
+//#define ADAPTIVE_STEP_SMOOTHING

 /**
 * Custom Microstepping
@@ -1474,6 +1474,7 @@
  #if IS_ULTIPANEL
    #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
    #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
+    //#define ULTIPANEL_FLOWPERCENT // Encoder sets the flow percentage on the Status Screen
  #endif
 #endif

@@ -1528,7 +1529,7 @@
  #endif

  // Include a page of printer information in the LCD Main Menu
-  #define LCD_INFO_MENU
+  //#define LCD_INFO_MENU
  #if ENABLED(LCD_INFO_MENU)
    //#define LCD_PRINTER_INFO_IS_BOOTSCREEN // Show bootscreen(s) instead of Printer Info pages
  #endif
@@ -1539,6 +1540,7 @@
   * Axis moves <= 1/2 the axis length and Extruder moves <= EXTRUDE_MAXLENGTH
   * will be shown in the move submenus.
   */
+
  #define MANUAL_MOVE_DISTANCE_MM                    10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM         100, 50, 10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM    500, 100, 50, 10, 1.0, 0.1  // (mm)
@@ -1580,7 +1582,7 @@
      #define BOOT_MARLIN_LOGO_SMALL      // Show a smaller Marlin logo on the Boot Screen (saving lots of flash)
    #endif
    #if HAS_MARLINUI_U8GLIB
-      #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
+      //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~3260 (or ~940) bytes of flash.
    #endif
    #if ANY(HAS_MARLINUI_U8GLIB, TOUCH_UI_FTDI_EVE)
      //#define SHOW_CUSTOM_BOOTSCREEN    // Show the bitmap in Marlin/_Bootscreen.h on startup.
@@ -1599,10 +1601,10 @@
  #endif

  // The timeout to return to the status screen from sub-menus
-  #define LCD_TIMEOUT_TO_STATUS 15000   // (ms)
+  //#define LCD_TIMEOUT_TO_STATUS 15000   // (ms)

  // Scroll a longer status message into view
-  #define STATUS_MESSAGE_SCROLLING
+  //#define STATUS_MESSAGE_SCROLLING

  // Apply a timeout to low-priority status messages
  //#define STATUS_MESSAGE_TIMEOUT_SEC 30 // (seconds)
@@ -1654,7 +1656,7 @@
 #endif

 // Add 'M73' to set print job progress, overrides Marlin's built-in estimate
-#define SET_PROGRESS_MANUALLY
+//#define SET_PROGRESS_MANUALLY
 #if ENABLED(SET_PROGRESS_MANUALLY)
  #define SET_PROGRESS_PERCENT            // Add 'P' parameter to set percentage done
  #define SET_REMAINING_TIME              // Add 'R' parameter to set remaining time
@@ -1743,21 +1745,26 @@
   */
  //#define POWER_LOSS_RECOVERY
  #if ENABLED(POWER_LOSS_RECOVERY)
-    #define PLR_ENABLED_DEFAULT       false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
+    #define PLR_ENABLED_DEFAULT       false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
    //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable)
-    //#define BACKUP_POWER_SUPPLY           // Backup power / UPS to move the steppers on power loss
-    //#define POWER_LOSS_ZRAISE           2 // (mm) Z axis raise on resume (on power loss with UPS)
-    //#define POWER_LOSS_PIN             44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
-    //#define POWER_LOSS_STATE         HIGH // State of pin indicating power loss
+
+    //#define POWER_LOSS_PIN             44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default.
+    //#define POWER_LOSS_STATE         HIGH // State of pin indicating power-loss
    //#define POWER_LOSS_PULLUP             // Set pullup / pulldown as appropriate for your sensor
    //#define POWER_LOSS_PULLDOWN
-    //#define POWER_LOSS_PURGE_LEN       20 // (mm) Length of filament to purge on resume
-    //#define POWER_LOSS_RETRACT_LEN     10 // (mm) Length of filament to retract on fail. Requires backup power.
+
+    //#define POWER_LOSS_ZRAISE        2    // (mm) Z axis raise on resume (on power-loss with UPS)
+    //#define POWER_LOSS_PURGE_LEN    20    // (mm) Length of filament to purge on resume

    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
    // especially with "vase mode" printing. Set too high and vases cannot be continued.
    #define POWER_LOSS_MIN_Z_CHANGE    0.05 // (mm) Minimum Z change before saving power-loss data

+    //#define BACKUP_POWER_SUPPLY           // Backup power / UPS to move the steppers on power-loss
+    #if ENABLED(BACKUP_POWER_SUPPLY)
+      //#define POWER_LOSS_RETRACT_LEN   10 // (mm) Length of filament to retract on fail
+    #endif
+
    // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
    //#define POWER_LOSS_RECOVER_ZHOME
    #if ENABLED(POWER_LOSS_RECOVER_ZHOME)
@@ -1806,13 +1813,13 @@

  // Allow international symbols in long filenames. To display correctly, the
  // LCD's font must contain the characters. Check your selected LCD language.
-  #define UTF_FILENAME_SUPPORT
+  //#define UTF_FILENAME_SUPPORT

-  #define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
+  //#define LONG_FILENAME_HOST_SUPPORT    // Get the long filename of a file/folder with 'M33 <dosname>' and list long filenames with 'M20 L'
  //#define LONG_FILENAME_WRITE_SUPPORT   // Create / delete files with long filenames via M28, M30, and Binary Transfer Protocol
  //#define M20_TIMESTAMP_SUPPORT         // Include timestamps by adding the 'T' flag to M20 commands

-  #define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu
+  //#define SCROLL_LONG_FILENAMES         // Scroll long filenames in the SD card menu

  //#define SD_ABORT_NO_COOLDOWN          // Leave the heaters on after Stop Print (not recommended!)

@@ -1913,7 +1920,7 @@
   *
   * :[ 'LCD', 'ONBOARD', 'CUSTOM_CABLE' ]
   */
-  #define SDCARD_CONNECTION ONBOARD
+  //#define SDCARD_CONNECTION LCD

  // Enable if SD detect is rendered useless (e.g., by using an SD extender)
  //#define NO_SD_DETECT
@@ -2263,18 +2270,18 @@
 *
 * Warning: Does not respect endstops!
 */
-#define BABYSTEPPING
+//#define BABYSTEPPING
 #if ENABLED(BABYSTEPPING)
  //#define EP_BABYSTEPPING                 // M293/M294 babystepping with EMERGENCY_PARSER support
  //#define BABYSTEP_WITHOUT_HOMING
-  #define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
+  //#define BABYSTEP_ALWAYS_AVAILABLE       // Allow babystepping at all times (not just during movement)
  //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
  //#define BABYSTEP_INVERT_Z               // Enable if Z babysteps should go the other way
  //#define BABYSTEP_MILLIMETER_UNITS       // Specify BABYSTEP_MULTIPLICATOR_(XY|Z) in mm instead of micro-steps
-  #define BABYSTEP_MULTIPLICATOR_Z  25       // (steps or mm) Steps or millimeter distance for each Z babystep
+  #define BABYSTEP_MULTIPLICATOR_Z  1       // (steps or mm) Steps or millimeter distance for each Z babystep
  #define BABYSTEP_MULTIPLICATOR_XY 1       // (steps or mm) Steps or millimeter distance for each XY babystep

-  #define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
+  //#define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
  #if ENABLED(DOUBLECLICK_FOR_Z_BABYSTEPPING)
    #define DOUBLECLICK_MAX_INTERVAL 1250   // Maximum interval between clicks, in milliseconds.
                                            // Note: Extra time may be added to mitigate controller latency.
@@ -2286,7 +2293,7 @@

  //#define BABYSTEP_DISPLAY_TOTAL          // Display total babysteps since last G28

-  #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
+  //#define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
  #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
    //#define BABYSTEP_GFX_OVERLAY          // Enable graphical overlay on Z-offset editor
@@ -2310,7 +2317,7 @@
 *
 * See https://marlinfw.org/docs/features/lin_advance.html for full instructions.
 */
-#define LIN_ADVANCE
+//#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
  #if ENABLED(DISTINCT_E_FACTORS)
    #define ADVANCE_K { 0.22 }    // (mm) Compression length per 1mm/s extruder speed, per extruder
@@ -2503,7 +2510,7 @@
 #endif

 // G5 Bézier Curve Support with XYZE destination and IJPQ offsets
-#define BEZIER_CURVE_SUPPORT        // Requires ~2666 bytes
+//#define BEZIER_CURVE_SUPPORT        // Requires ~2666 bytes

 #if ANY(ARC_SUPPORT, BEZIER_CURVE_SUPPORT)
  //#define CNC_WORKSPACE_PLANES      // Allow G2/G3/G5 to operate in XY, ZX, or YZ planes
@@ -2564,7 +2571,7 @@
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
-//#define MINIMUM_STEPPER_PULSE 5
+//#define MINIMUM_STEPPER_PULSE 2

 /**
 * Maximum stepping rate (in Hz) the stepper driver allows
@@ -2578,7 +2585,7 @@
 *
 * Override the default value based on the driver type set in Configuration.h.
 */
-//#define MAXIMUM_STEPPER_RATE 150000
+//#define MAXIMUM_STEPPER_RATE 250000

 // @section temperature

@@ -2595,16 +2602,16 @@
 #if ALL(HAS_MEDIA, DIRECT_STEPPING)
  #define BLOCK_BUFFER_SIZE  8
 #elif HAS_MEDIA
-  #define BLOCK_BUFFER_SIZE 32
+  #define BLOCK_BUFFER_SIZE 16
 #else
-  #define BLOCK_BUFFER_SIZE 32
+  #define BLOCK_BUFFER_SIZE 16
 #endif

 // @section serial

 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 96
-#define BUFSIZE 16
+#define BUFSIZE 4

 // Transmission to Host Buffer Size
 // To save 386 bytes of flash (and TX_BUFFER_SIZE+3 bytes of RAM) set to 0.
@@ -2651,7 +2658,7 @@
 * Currently handles M108, M112, M410, M876
 * NOTE: Not yet implemented for all platforms.
 */
-#define EMERGENCY_PARSER
+//#define EMERGENCY_PARSER

 /**
 * Realtime Reporting (requires EMERGENCY_PARSER)
@@ -2682,7 +2689,7 @@
 //#define NO_TIMEOUTS 1000 // (ms)

 // Some clients will have this feature soon. This could make the NO_TIMEOUTS unnecessary.
-#define ADVANCED_OK
+//#define ADVANCED_OK

 // Printrun may have trouble receiving long strings all at once.
 // This option inserts short delays between lines of serial output.
@@ -2884,7 +2891,7 @@
 *
 * Enable PARK_HEAD_ON_PAUSE to add the G-code M125 Pause and Park.
 */
-#define ADVANCED_PAUSE_FEATURE
+//#define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
  #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
@@ -2924,11 +2931,11 @@
  //#define FILAMENT_CHANGE_RESUME_ON_INSERT      // Automatically continue / load filament when runout sensor is triggered again.
  //#define PAUSE_REHEAT_FAST_RESUME              // Reduce number of waits by not prompting again post-timeout before continuing.

-  #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
+  //#define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
  //#define HOME_BEFORE_FILAMENT_CHANGE           // If needed, home before parking for filament change

-  #define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
-  #define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
+  //#define FILAMENT_LOAD_UNLOAD_GCODES           // Add M701/M702 Load/Unload G-codes, plus Load/Unload in the LCD Prepare menu.
+  //#define FILAMENT_UNLOAD_ALL_EXTRUDERS         // Allow M702 to unload all extruders above a minimum target temp (as set by M302)
  #define CONFIGURE_FILAMENT_CHANGE               // Add M603 G-code and menu items. Requires ~1.3K bytes of flash.
 #endif

@@ -2960,7 +2967,7 @@
 */
 #if HAS_TRINAMIC_CONFIG || HAS_TMC26X

-  #define HOLD_MULTIPLIER    0.7  // Scales down the holding current from run current
+  #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current

  /**
   * Interpolate microsteps to 256
@@ -2972,7 +2979,7 @@
    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
    #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.022     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
    #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
    //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
    //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -2992,7 +2999,7 @@
    #define Y_CURRENT       800
    #define Y_CURRENT_HOME  Y_CURRENT
    #define Y_MICROSTEPS     16
-    #define Y_RSENSE          0.022
+    #define Y_RSENSE          0.11
    #define Y_CHAIN_POS      -1
    //#define Y_INTERPOLATE  true
    //#define Y_HOLD_MULTIPLIER 0.5
@@ -3109,7 +3116,7 @@
  #endif

  #if AXIS_IS_TMC_CONFIG(E0)
-    #define E0_CURRENT      900
+    #define E0_CURRENT      800
    #define E0_MICROSTEPS    16
    #define E0_RSENSE         0.11
    #define E0_CHAIN_POS     -1
@@ -3214,7 +3221,7 @@
   * The default SW SPI pins are defined the respective pins files,
   * but you can override or define them here.
   */
-  #define TMC_USE_SW_SPI
+  //#define TMC_USE_SW_SPI
  //#define TMC_SPI_MOSI  -1
  //#define TMC_SPI_MISO  -1
  //#define TMC_SPI_SCK   -1
@@ -3274,7 +3281,7 @@
   * When disabled, Marlin will use spreadCycle stepping mode.
   */
  #if HAS_STEALTHCHOP
-    //#define STEALTHCHOP_XY
+    #define STEALTHCHOP_XY
    #define STEALTHCHOP_Z
    #define STEALTHCHOP_I
    #define STEALTHCHOP_J
@@ -3282,7 +3289,7 @@
    #define STEALTHCHOP_U
    #define STEALTHCHOP_V
    #define STEALTHCHOP_W
-    //#define STEALTHCHOP_E
+    #define STEALTHCHOP_E
  #endif

  /**
@@ -3300,11 +3307,11 @@
   * Define your own with:
   * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
   */
-  //#define CHOPPER_TIMING CHOPPER_DEFAULT_36V        // All axes (override below)
-  #define CHOPPER_TIMING_X  CHOPPER_DEFAULT_36V        // For X Axes (override below)
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V        // All axes (override below)
+  //#define CHOPPER_TIMING_X  CHOPPER_TIMING        // For X Axes (override below)
  //#define CHOPPER_TIMING_X2 CHOPPER_TIMING_X
-  #define CHOPPER_TIMING_Y  CHOPPER_DEFAULT_36V        // For Y Axes (override below)
-  #define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
+  //#define CHOPPER_TIMING_Y  CHOPPER_TIMING        // For Y Axes (override below)
+  //#define CHOPPER_TIMING_Y2 CHOPPER_TIMING_Y
  //#define CHOPPER_TIMING_Z  CHOPPER_TIMING        // For Z Axes (override below)
  //#define CHOPPER_TIMING_Z2 CHOPPER_TIMING_Z
  //#define CHOPPER_TIMING_Z3 CHOPPER_TIMING_Z
@@ -3315,7 +3322,7 @@
  //#define CHOPPER_TIMING_U  CHOPPER_TIMING        // For U Axis
  //#define CHOPPER_TIMING_V  CHOPPER_TIMING        // For V Axis
  //#define CHOPPER_TIMING_W  CHOPPER_TIMING        // For W Axis
-  #define CHOPPER_TIMING_E  CHOPPER_DEFAULT_24V        // For Extruders (override below)
+  //#define CHOPPER_TIMING_E  CHOPPER_TIMING        // For Extruders (override below)
  //#define CHOPPER_TIMING_E1 CHOPPER_TIMING_E
  //#define CHOPPER_TIMING_E2 CHOPPER_TIMING_E
  //#define CHOPPER_TIMING_E3 CHOPPER_TIMING_E
@@ -3337,12 +3344,12 @@
   * M912 - Clear stepper driver overtemperature pre-warn condition flag.
   * M122 - Report driver parameters (Requires TMC_DEBUG)
   */
-  #define MONITOR_DRIVER_STATUS
+  //#define MONITOR_DRIVER_STATUS

  #if ENABLED(MONITOR_DRIVER_STATUS)
    #define CURRENT_STEP_DOWN     50  // [mA]
    #define REPORT_CURRENT_CHANGE
-    //#define STOP_ON_ERROR
+    #define STOP_ON_ERROR
  #endif

  // @section tmc/hybrid
@@ -3444,7 +3451,7 @@
  /**
   * Step on both rising and falling edge signals (as with a square wave).
   */
-  #define EDGE_STEPPING
+  //#define EDGE_STEPPING

  /**
   * Enable M122 debugging command for TMC stepper drivers.
@@ -4113,14 +4120,14 @@
 * Host Prompt Support enables Marlin to use the host for user prompts so
 * filament runout and other processes can be managed from the host side.
 */
-#define HOST_ACTION_COMMANDS
+//#define HOST_ACTION_COMMANDS
 #if ENABLED(HOST_ACTION_COMMANDS)
  //#define HOST_PAUSE_M76                // Tell the host to pause in response to M76
-  #define HOST_PROMPT_SUPPORT           // Initiate host prompts to get user feedback
+  //#define HOST_PROMPT_SUPPORT           // Initiate host prompts to get user feedback
  #if ENABLED(HOST_PROMPT_SUPPORT)
-    #define HOST_STATUS_NOTIFICATIONS   // Send some status messages to the host as notifications
+    //#define HOST_STATUS_NOTIFICATIONS   // Send some status messages to the host as notifications
  #endif
-  #define HOST_START_MENU_ITEM          // Add a menu item that tells the host to start
+  //#define HOST_START_MENU_ITEM          // Add a menu item that tells the host to start
  //#define HOST_SHUTDOWN_MENU_ITEM       // Add a menu item that tells the host to shut down
 #endif

@@ -4488,7 +4495,7 @@
 //
 // M42 - Set pin states
 //
-#define DIRECT_PIN_CONTROL
+//#define DIRECT_PIN_CONTROL

 //
 // M43 - display pin status, toggle pins, watch pins, watch endstops & toggle LED, test servo probe
@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-05-27"
+//#define STRING_DISTRIBUTION_DATE "2024-01-31"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -61,7 +61,7 @@
 #else
  #define G2_PWM_Z 0
 #endif
-#if HAS_MOTOR_CURRENT_PWM_E
+#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
  #define G2_PWM_E 1
 #else
  #define G2_PWM_E 0
@@ -18,32 +18,32 @@ extern "C" {
 void sd_mmc_spi_mem_init() {
 }

-inline bool media_ready() {
-  return IS_SD_INSERTED() && !IS_SD_PRINTING() && !IS_SD_FILE_OPEN() && card.isMounted();
-}
-
-bool sd_mmc_spi_unload(bool) { return true; }
-
-bool sd_mmc_spi_wr_protect() { return false; }
-
-bool sd_mmc_spi_removal() { return !media_ready(); }
-
 Ctrl_status sd_mmc_spi_test_unit_ready() {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
  return CTRL_GOOD;
 }

 // NOTE: This function is defined as returning the address of the last block
 // in the card, which is cardSize() - 1
 Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector) {
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;
  *nb_sector = card.diskIODriver()->cardSize() - 1;
  return CTRL_GOOD;
 }

+bool sd_mmc_spi_unload(bool) { return true; }
+
+bool sd_mmc_spi_wr_protect() { return false; }
+
+bool sd_mmc_spi_removal() {
+  return (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted());
+}
+
 #if ACCESS_USB == true
 /**
 * \name MEM <-> USB Interface
@@ -61,7 +61,8 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -100,7 +101,8 @@ Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector) {
  #ifdef DISABLE_DUE_SD_MMC
    return CTRL_NO_PRESENT;
  #endif
-  if (!media_ready()) return CTRL_NO_PRESENT;
+  if (!IS_SD_INSERTED() || IS_SD_PRINTING() || IS_SD_FILE_OPEN() || !card.isMounted())
+    return CTRL_NO_PRESENT;

  #ifdef DEBUG_MMC
  {
@@ -74,7 +74,7 @@
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
 //!/
-void sd_mmc_spi_mem_init();
+extern void           sd_mmc_spi_mem_init(void);

 //!
 //! @brief This function tests the state of the SD_MMC memory and sends it to the Host.
@@ -87,7 +87,7 @@ void sd_mmc_spi_mem_init();
 //!   Media not present    ->    CTRL_NO_PRESENT
 //!   Media has changed    ->    CTRL_BUSY
 //!/
-Ctrl_status sd_mmc_spi_test_unit_ready();
+extern Ctrl_status    sd_mmc_spi_test_unit_ready(void);

 //!
 //! @brief This function gives the address of the last valid sector.
@@ -98,7 +98,7 @@ Ctrl_status sd_mmc_spi_test_unit_ready();
 //!   Media ready          ->  CTRL_GOOD
 //!   Media not present    ->  CTRL_NO_PRESENT
 //!/
-Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
+extern Ctrl_status    sd_mmc_spi_read_capacity(uint32_t *nb_sector);

 /*! \brief Unload/Load the SD/MMC card selected
 *
@@ -109,7 +109,7 @@ Ctrl_status sd_mmc_spi_read_capacity(uint32_t *nb_sector);
 *
 * \return \c true if unload/load done success.
 */
-bool sd_mmc_spi_unload(bool unload);
+extern bool sd_mmc_spi_unload(bool unload);

 //!
 //! @brief This function returns the write protected status of the memory.
@@ -120,14 +120,14 @@ bool sd_mmc_spi_unload(bool unload);
 //!
 //! @return false  -> the memory is not write-protected (always)
 //!/
-bool sd_mmc_spi_wr_protect();
+extern bool           sd_mmc_spi_wr_protect(void);

 //!
 //! @brief This function tells if the memory has been removed or not.
 //!
 //! @return false  -> The memory isn't removed
 //!
-bool sd_mmc_spi_removal();
+extern bool           sd_mmc_spi_removal(void);

 //---- ACCESS DATA FUNCTIONS ----

@@ -147,7 +147,7 @@ bool sd_mmc_spi_removal();
 //!   It is ready    ->    CTRL_GOOD
 //!   A error occur  ->    CTRL_FAIL
 //!
-Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
+extern Ctrl_status    sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);

 //! This function initializes the SD/MMC memory for a write operation
 //!
@@ -161,7 +161,7 @@ Ctrl_status sd_mmc_spi_usb_read_10(uint32_t addr, uint16_t nb_sector);
 //!   It is ready    ->    CTRL_GOOD
 //!   An error occurs  ->    CTRL_FAIL
 //!
-Ctrl_status sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);
+extern Ctrl_status    sd_mmc_spi_usb_write_10(uint32_t addr, uint16_t nb_sector);

 #endif // #if ACCESS_USB == true

@@ -53,11 +53,12 @@ typedef uint64_t hal_timer_t;
 #if ENABLED(I2S_STEPPER_STREAM)
  #define STEPPER_TIMER_PRESCALE     1
  #define STEPPER_TIMER_RATE         250000                           // 250khz, 4µs pulses of i2s word clock
+  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs // wrong would be 0.25
 #else
  #define STEPPER_TIMER_PRESCALE     40
  #define STEPPER_TIMER_RATE         ((HAL_TIMER_RATE) / (STEPPER_TIMER_PRESCALE)) // frequency of stepper timer, 2MHz
+  #define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000)              // stepper timer ticks per µs
 #endif
-#define STEPPER_TIMER_TICKS_PER_US   ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs

 #define STEP_TIMER_MIN_INTERVAL   8 // minimum time in µs between stepper interrupts

@@ -142,31 +142,12 @@
 // ADC
 //
 #define HAL_ADC_VREF_MV 3300
-#define HAL_ADC_RESOLUTION 12
+#define HAL_ADC_RESOLUTION 10

 #define GET_PIN_MAP_PIN(index) index
 #define GET_PIN_MAP_INDEX(pin) pin
 #define PARSED_PIN_INDEX(code, dval) parser.intval(code, dval)

-//
-// Debug port disable
-// JTMS / SWDIO = PA13
-// JTCK / SWCLK = PA14
-// JTDI         = PA15
-// JTDO         = PB3
-// NJTRST       = PB4
-//
-#define DBG_SWCLK _BV(0)
-#define DBG_SWDIO _BV(1)
-#define DBG_TDO   _BV(2)
-#define DBG_TDI   _BV(3)
-#define DBG_TRST  _BV(4)
-#define DBG_ALL (DBG_SWCLK | DBG_SWDIO | DBG_TDO | DBG_TDI | DBG_TRST)
-
-#define JTAGSWD_RESET() PORT_DebugPortSetting(DBG_ALL, Enable);
-#define JTAG_DISABLE() PORT_DebugPortSetting(DBG_TDO | DBG_TDI | DBG_TRST, Disable);
-#define JTAGSWD_DISABLE() PORT_DebugPortSetting(DBG_ALL, Disable);
-
 //
 // MarlinHAL implementation
 //
@@ -123,11 +123,6 @@ void MarlinHAL::init() {

  // Register min serial
  TERN_(POSTMORTEM_DEBUGGING, install_min_serial());
-
-  // warn if low memory after init
-  if (freeMemory() < 1024) {
-    SERIAL_WARN_MSG("HAL: low memory after init!\n");
-  }
 }

 void MarlinHAL::init_board() {}
@@ -152,31 +147,7 @@ void MarlinHAL::delay_ms(const int ms) {
  delay(ms);
 }

-void MarlinHAL::idletask() {
-  #if ENABLED(MARLIN_DEV_MODE)
-    // check & print serial RX errors
-    MSerialT *serials[] = { &MSerial1, &MSerial2 };
-    for (int serial = 0; serial < 2; serial++) {
-      usart_receive_error_t err = serials[serial]->getReceiveError();
-      if (err != usart_receive_error_t::None) {
-        // "Warning: MSerial[n] RX [Framing|Parity|Overrun] Error"
-        SERIAL_WARN_START();
-        SERIAL_ECHOPGM(" MSerial");
-        SERIAL_ECHO(serial + 1);
-        SERIAL_ECHOPGM(" RX ");
-        switch(err) {
-          case usart_receive_error_t::FramingError: SERIAL_ECHOPGM("Framing"); break;
-          case usart_receive_error_t::ParityError:  SERIAL_ECHOPGM("Parity");  break;
-          case usart_receive_error_t::OverrunError: SERIAL_ECHOPGM("Overrun"); break;
-          case usart_receive_error_t::RxDataDropped: SERIAL_ECHOPGM("DataDropped"); break;
-          default: break;
-        }
-        SERIAL_ECHOPGM(" Error");
-        SERIAL_EOL();
-      }
-    }
-  #endif
-}
+void MarlinHAL::idletask() {}

 uint8_t MarlinHAL::get_reset_source() {
  // Query reset cause from RMU
@@ -232,9 +203,7 @@ int MarlinHAL::freeMemory() {
  return &top - _sbrk(0);
 }

-void MarlinHAL::adc_init() {
-  analogReadResolution(HAL_ADC_RESOLUTION);
-}
+void MarlinHAL::adc_init() {}

 void MarlinHAL::adc_enable(const pin_t pin) {
  #if TEMP_SENSOR_SOC
@@ -46,34 +46,14 @@ constexpr bool serial_handles_emergency(int port) {
 //
 // Define serial ports
 //
-
-// serial port where RX and TX use IRQs
-#define DEFINE_IRQ_SERIAL_MARLIN(name, n)      \
+#define DEFINE_HWSERIAL_MARLIN(name, n)      \
  MSerialT name(serial_handles_emergency(n), \
                &USART##n##_config,          \
                BOARD_USART##n##_TX_PIN,     \
                BOARD_USART##n##_RX_PIN);

-// serial port where RX uses DMA and TX uses IRQs
-// all serial ports use DMA1
-// since there are 4 USARTs and 4 DMA channels, we can use the USART number as the DMA channel
-#define DEFINE_DMA_SERIAL_MARLIN(name, n)      \
-  MSerialT name(serial_handles_emergency(n), \
-                &USART##n##_config,          \
-                BOARD_USART##n##_TX_PIN,     \
-                BOARD_USART##n##_RX_PIN,     \
-                M4_DMA1,                     \
-                ((en_dma_channel_t)(n - 1))); // map USART1 to DMA channel 0, USART2 to DMA channel 1, etc.
-
-#define DEFINE_SERIAL_MARLIN(name, n) TERN(SERIAL_DMA, DEFINE_DMA_SERIAL_MARLIN(name, n), DEFINE_IRQ_SERIAL_MARLIN(name, n))
-
-DEFINE_SERIAL_MARLIN(MSerial1, 1);
-DEFINE_SERIAL_MARLIN(MSerial2, 2);
-
-// TODO: remove this warning when SERIAL_DMA has been tested some more
-#if ENABLED(SERIAL_DMA)
-  #warning "SERIAL_DMA may be unstable on HC32F460."
-#endif
+DEFINE_HWSERIAL_MARLIN(MSerial1, 1);
+DEFINE_HWSERIAL_MARLIN(MSerial2, 2);

 //
 // Serial port assertions
@@ -25,42 +25,17 @@
 #include <drivers/usart/Usart.h>

 // Optionally set uart IRQ priority to reduce overflow errors
-//#define UART_RX_IRQ_PRIO 1
-//#define UART_TX_IRQ_PRIO 1
-//#define UART_RX_DMA_IRQ_PRIO 1
+// #define UART_IRQ_PRIO 1

 struct MarlinSerial : public Usart {
-  MarlinSerial(
-    struct usart_config_t *usart_device,
-    gpio_pin_t tx_pin,
-    gpio_pin_t rx_pin
-    #if ENABLED(SERIAL_DMA)
-    , M4_DMA_TypeDef *dma_unit = nullptr,
-    en_dma_channel_t rx_dma_channel = DmaCh0
-    #endif
-  ) : Usart(usart_device, tx_pin, rx_pin) {
-    #if ENABLED(SERIAL_DMA)
-      if (dma_unit != nullptr) {
-        enableRxDma(dma_unit, rx_dma_channel);
-      }
-    #endif
-  }
+  MarlinSerial(struct usart_config_t *usart_device, gpio_pin_t tx_pin, gpio_pin_t rx_pin) : Usart(usart_device, tx_pin, rx_pin) {}

-  #if defined(UART_RX_IRQ_PRIO) || defined(UART_TX_IRQ_PRIO) || defined(UART_RX_DMA_IRQ_PRIO)
+  #ifdef UART_IRQ_PRIO
    void setPriority() {
-      #if defined(UART_RX_IRQ_PRIO)
-        NVIC_SetPriority(c_dev()->interrupts.rx_data_available.interrupt_number, UART_RX_IRQ_PRIO);
-        NVIC_SetPriority(c_dev()->interrupts.rx_error.interrupt_number, UART_RX_IRQ_PRIO);
-      #endif
-
-      #if defined(UART_TX_IRQ_PRIO)
-        NVIC_SetPriority(c_dev()->interrupts.tx_buffer_empty.interrupt_number, UART_TX_IRQ_PRIO);
-        NVIC_SetPriority(c_dev()->interrupts.tx_complete.interrupt_number, UART_TX_IRQ_PRIO);
-      #endif
-
-      #if defined(UART_RX_DMA_IRQ_PRIO) && ENABLED(SERIAL_DMA)
-        NVIC_SetPriority(c_dev()->dma.rx.rx_data_available_dma_btc.interrupt_number, UART_RX_DMA_IRQ_PRIO);
-      #endif
+      NVIC_SetPriority(c_dev()->interrupts.rx_data_available.interrupt_number, UART_IRQ_PRIO);
+      NVIC_SetPriority(c_dev()->interrupts.rx_error.interrupt_number, UART_IRQ_PRIO);
+      NVIC_SetPriority(c_dev()->interrupts.tx_buffer_empty.interrupt_number, UART_IRQ_PRIO);
+      NVIC_SetPriority(c_dev()->interrupts.tx_complete.interrupt_number, UART_IRQ_PRIO);
    }

    void begin(uint32_t baud) {
@@ -72,12 +47,7 @@ struct MarlinSerial : public Usart {
      Usart::begin(baud, config);
      setPriority();
    }
-
-    void begin(uint32_t baud, const stc_usart_uart_init_t *config, const bool rxNoiseFilter = true) {
-      Usart::begin(baud, config, rxNoiseFilter);
-      setPriority();
-    }
-  #endif // UART_RX_IRQ_PRIO || UART_TX_IRQ_PRIO || UART_RX_DMA_IRQ_PRIO
+  #endif
 };

 typedef Serial1Class<MarlinSerial> MSerialT;
@@ -1,75 +0,0 @@
-/**
- * app_config.h is included by the hc32f460 arduino build script for every source file.
- * it is used to configure the arduino core (and ddl) automatically according
- * to the settings in Configuration.h and Configuration_adv.h.
- */
-#pragma once
-#ifndef _HC32_APP_CONFIG_H_
-#define _HC32_APP_CONFIG_H_
-
-#include "../../inc/MarlinConfigPre.h"
-
-//
-// dev mode
-//
-#if ENABLED(MARLIN_DEV_MODE)
-  #define __DEBUG 1
-  #define __CORE_DEBUG 1
-#endif
-
-//
-// Fault Handlers and Panic
-//
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-  // disable arduino core fault handler, as we define our own
-  #define CORE_DISABLE_FAULT_HANDLER 1
-#endif
-
-// force-enable panic handler so that we can use our custom one (in MinSerial)
-#define PANIC_ENABLE 1
-
-// use short filenames in ddl debug and core panic output
-#define __DEBUG_SHORT_FILENAMES 1
-#define __PANIC_SHORT_FILENAMES 1
-
-// omit panic messages in core panic output
-#define __OMIT_PANIC_MESSAGE 1
-
-//
-// Usart
-//
-
-// disable serial globals (Serial1, Serial2, ...), as we define our own
-#define DISABLE_SERIAL_GLOBALS 1
-
-// increase the size of the Usart buffers (both RX and TX)
-// NOTE:
-// the heap usage will increase by (SERIAL_BUFFER_SIZE - 64) * "number of serial ports used"
-// if running out of heap, the system may become unstable
-//#define SERIAL_BUFFER_SIZE 256
-
-// enable support for Usart Clock Divider / Oversampling auto config
-#define USART_AUTO_CLKDIV_OS_CONFIG 1
-
-// enable USART_RX_DMA_SUPPORT core option when SERIAL_DMA is enabled
-#if ENABLED(SERIAL_DMA)
-  #define USART_RX_DMA_SUPPORT 1
-#endif
-
-//
-// Misc.
-//
-
-// redirect printf to host serial
-#define REDIRECT_PRINTF_TO_SERIAL 1
-
-// F_CPU must be known at compile time, but on HC32F460 it's not.
-// Thus we assume HCLK to be 200MHz, as that's what is configured in
-// 'core_hook_sysclock_init' in 'sysclock.cpp'.
-// If you face issues with this assumption, please double-check with the values
-// printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
-// see also: HAL_TIMER_RATE in timers.h
-#define F_CPU 200000000 // 200MHz HCLK
-
-#endif // _HC32_APP_CONFIG_H_
@@ -40,15 +40,9 @@ void endstopIRQHandler() {
  CHECK(X_MAX);
  CHECK(X_MIN);

-  CHECK(X2_MAX);
-  CHECK(X2_MIN);
-
  CHECK(Y_MAX);
  CHECK(Y_MIN);

-  CHECK(Y2_MAX);
-  CHECK(Y2_MIN);
-
  CHECK(Z_MAX);
  CHECK(Z_MIN);

@@ -58,9 +52,6 @@ void endstopIRQHandler() {
  CHECK(Z3_MAX);
  CHECK(Z3_MIN);

-  CHECK(Z4_MAX);
-  CHECK(Z4_MIN);
-
  CHECK(Z_MIN_PROBE);

  // Update endstops
@@ -78,15 +69,9 @@ void setup_endstop_interrupts() {
  SETUP(X_MAX);
  SETUP(X_MIN);

-  SETUP(X2_MAX);
-  SETUP(X2_MIN);
-
  SETUP(Y_MAX);
  SETUP(Y_MIN);

-  SETUP(Y2_MAX);
-  SETUP(Y2_MIN);
-
  SETUP(Z_MAX);
  SETUP(Z_MIN);

@@ -96,9 +81,6 @@ void setup_endstop_interrupts() {
  SETUP(Z3_MAX);
  SETUP(Z3_MIN);

-  SETUP(Z4_MAX);
-  SETUP(Z4_MIN);
-
  SETUP(Z_MIN_PROBE);

  #undef SETUP
@@ -106,7 +88,7 @@ void setup_endstop_interrupts() {

 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_Y_MAX, USE_Y_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z_MIN_PROBE)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
  #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0
@@ -20,20 +20,6 @@
 *
 */
 #pragma once
-#include <core_util.h>
-
-#if !defined(ARDUINO_CORE_VERSION_INT) || !defined(GET_VERSION_INT)
-  // version macros were introduced in arduino core version 1.1.0
-  // below that version, we polyfill them
-  #define GET_VERSION_INT(major, minor, patch) ((major * 100000) + (minor * 1000) + patch)
-  #define ARDUINO_CORE_VERSION_INT GET_VERSION_INT(1, 0, 0)
-#endif
-
-#if ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 1, 0)
-  // because we use app_config.h introduced in arduino core version 1.1.0, the
-  // HAL is not compatible with older versions
-  #error "The HC32 HAL is not compatible with Arduino Core versions < 1.1.0. Consider updating the Arduino Core."
-#endif

 #ifndef BOARD_XTAL_FREQUENCY
  #error "BOARD_XTAL_FREQUENCY is required for HC32F460."
@@ -88,18 +74,3 @@
    #error "HC32 HAL uses a custom panic handler. Do not define PANIC_USARTx_TX_PIN."
  #endif
 #endif
-
-#if ENABLED(SERIAL_DMA)
-  #if !defined(USART_RX_DMA_SUPPORT)
-    #error "SERIAL_DMA requires USART_RX_DMA_SUPPORT to be enabled in the arduino core."
-  #endif
-
-  // USART_RX_DMA_SUPPORT does not implement core_hook_usart_rx_irq, which is required for the emergency parser
-  #if ENABLED(EMERGENCY_PARSER)
-    #error "EMERGENCY_PARSER is not supported with SERIAL_DMA. Please disable either SERIAL_DMA or EMERGENCY_PARSER."
-  #endif
-
-  #if ARDUINO_CORE_VERSION_INT < GET_VERSION_INT(1, 1, 0)
-    #error "SERIAL_DMA is not supported with arduino core version < 1.1.0."
-  #endif
-#endif
@@ -54,7 +54,7 @@
    fn                                              \
  }

-stc_sd_handle_t *handle = nullptr;
+stc_sd_handle_t *handle;

 bool SDIO_Init() {
  // Configure SDIO pins
@@ -66,45 +66,36 @@ bool SDIO_Init() {
  GPIO_SetFunc(BOARD_SDIO_CMD, Func_Sdio);
  GPIO_SetFunc(BOARD_SDIO_DET, Func_Sdio);

-  // If a handle is already initialized, free it before creating a new one
-  // otherwise, we will leak memory, which will eventually crash the system
-  if (handle != nullptr) {
-    delete handle->pstcDmaInitCfg;
-    delete handle->pstcCardInitCfg;
-    delete handle;
-    handle = nullptr;
-  }
-
  // Create DMA configuration
  stc_sdcard_dma_init_t *dmaConf = new stc_sdcard_dma_init_t;
  dmaConf->DMAx = SDIO_DMA_PERIPHERAL;
  dmaConf->enDmaCh = SDIO_DMA_CHANNEL;

-  // Create card configuration
-  // This should be a fairly safe configuration for most cards
-  stc_sdcard_init_t *cardConf = new stc_sdcard_init_t;
-  cardConf->enBusWidth = SdiocBusWidth4Bit;
-  cardConf->enClkFreq = SdiocClk400K;
-  cardConf->enSpeedMode = SdiocNormalSpeedMode;
-  cardConf->pstcInitCfg = nullptr;
-
  // Create handle in DMA mode
  handle = new stc_sd_handle_t;
  handle->SDIOCx = SDIO_PERIPHERAL;
  handle->enDevMode = SdCardDmaMode;
  handle->pstcDmaInitCfg = dmaConf;
-  //handle->pstcCardInitCfg = cardConf; // assigned in SDCARD_Init
+
+  // Create card configuration
+  // This should be a fairly safe configuration for most cards
+  stc_sdcard_init_t cardConf = {
+    .enBusWidth = SdiocBusWidth4Bit,
+    .enClkFreq = SdiocClk400K,
+    .enSpeedMode = SdiocNormalSpeedMode,
+    //.pstcInitCfg = NULL,
+  };

  // Initialize sd card
-  en_result_t rc = SDCARD_Init(handle, cardConf);
+  en_result_t rc = SDCARD_Init(handle, &cardConf);
  if (rc != Ok) printf("SDIO_Init() error (rc=%u)\n", rc);

  return rc == Ok;
 }

 bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
-  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
-  CORE_ASSERT(dst != nullptr, "SDIO_ReadBlock dst is NULL", return false);
+  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(dst != NULL, "SDIO_ReadBlock dst is NULL");

  WITH_RETRY(SDIO_READ_RETRIES, {
    en_result_t rc = SDCARD_ReadBlocks(handle, block, 1, dst, SDIO_READ_TIMEOUT);
@@ -116,8 +107,8 @@ bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
 }

 bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
-  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
-  CORE_ASSERT(src != nullptr, "SDIO_WriteBlock src is NULL", return false);
+  CORE_ASSERT(handle != NULL, "SDIO not initialized");
+  CORE_ASSERT(src != NULL, "SDIO_WriteBlock src is NULL");

  WITH_RETRY(SDIO_WRITE_RETRIES, {
    en_result_t rc = SDCARD_WriteBlocks(handle, block, 1, (uint8_t *)src, SDIO_WRITE_TIMEOUT);
@@ -129,12 +120,12 @@ bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
 }

 bool SDIO_IsReady() {
-  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return false);
+  CORE_ASSERT(handle != NULL, "SDIO not initialized");
  return bool(handle->stcCardStatus.READY_FOR_DATA);
 }

 uint32_t SDIO_GetCardSize() {
-  CORE_ASSERT(handle != nullptr, "SDIO not initialized", return 0);
+  CORE_ASSERT(handle != NULL, "SDIO not initialized");

  // Multiply number of blocks with block size to get size in bytes
  const uint64_t cardSizeBytes = uint64_t(handle->stcSdCardInfo.u32LogBlockNbr) * uint64_t(handle->stcSdCardInfo.u32LogBlockSize);
@@ -96,44 +96,29 @@ void core_hook_sysclock_init() {
    #endif
  #endif

-  // sysclk is now configured according to F_CPU (i.e., 200MHz PLL output)
-  constexpr uint32_t sysclock = F_CPU;
-
-  // Setup clock divisors for sysclk = 200 MHz
+  // Setup clock divisors for sysclk = 200 MHz:
  // Note: PCLK1 is used for step+temp timers, and need to be kept at 50 MHz (until there is a better solution)
-  constexpr stc_clk_sysclk_cfg_t sysClkConf = {
+  stc_clk_sysclk_cfg_t sysClkConf = {
      .enHclkDiv = ClkSysclkDiv1,  // HCLK  = 200 MHz (CPU)
      .enExclkDiv = ClkSysclkDiv2, // EXCLK = 100 MHz (SDIO)
-      .enPclk0Div = ClkSysclkDiv2, // PCLK0 = 100 MHz (Timer6 (not used))
+      .enPclk0Div = ClkSysclkDiv1, // PCLK0 = 200 MHz (Timer6 (not used))
      .enPclk1Div = ClkSysclkDiv4, // PCLK1 = 50 MHz (USART, SPI, I2S, Timer0 (step+temp), TimerA (Servo))
-      .enPclk2Div = ClkSysclkDiv8, // PCLK2 = 25 MHz (ADC)
-      .enPclk3Div = ClkSysclkDiv8, // PCLK3 = 25 MHz (I2C, WDT)
+      .enPclk2Div = ClkSysclkDiv4, // PCLK2 = 50 MHz (ADC)
+      .enPclk3Div = ClkSysclkDiv4, // PCLK3 = 50 MHz (I2C, WDT)
      .enPclk4Div = ClkSysclkDiv2, // PCLK4 = 100 MHz (ADC ctl)
  };
-
-  #if ARDUINO_CORE_VERSION_INT >= GET_VERSION_INT(1, 2, 0)
-    assert_system_clocks_valid<
-      sysclock,
-      sysClkConf.enHclkDiv,
-      sysClkConf.enPclk0Div,
-      sysClkConf.enPclk1Div,
-      sysClkConf.enPclk2Div,
-      sysClkConf.enPclk3Div,
-      sysClkConf.enPclk4Div,
-      sysClkConf.enExclkDiv
-    >();
-  #endif
-
  sysclock_set_clock_dividers(&sysClkConf);

  // Set power mode
-  power_mode_update_pre(sysclock);
+  #define POWER_MODE_SYSTEM_CLOCK 200000000 // 200 MHz
+  power_mode_update_pre(POWER_MODE_SYSTEM_CLOCK);

  // Switch to MPLL as sysclk source
  CLK_SetSysClkSource(CLKSysSrcMPLL);

  // Set power mode
-  power_mode_update_post(sysclock);
+  power_mode_update_post(POWER_MODE_SYSTEM_CLOCK);
+  #undef POWER_MODE_SYSTEM_CLOCK
 }

 #endif // ARDUINO_ARCH_HC32
@@ -38,48 +38,44 @@ extern Timer0 step_timer;
 // Timer Configurations
 //

-/**
- * HAL_TIMER_RATE must be known at compile time since it's used to calculate
- * STEPPER_TIMER_RATE, which is used in 'constexpr' calculations.
- * On the HC32F460 the timer rate depends on PCLK1, which is derived from the
- * system clock configured at runtime. As a workaround, we use the existing
- * assumption of a 200MHz clock, defining F_CPU as 200000000, then configure PCLK1
- * as F_CPU with a divider of 4 in 'sysclock.cpp::core_hook_sysclock_init'.
- *
- * If you face issues with this assumption, please double-check with the values
- * printed by 'MarlinHAL::HAL_clock_frequencies_dump'.
- *
- * TODO: If the 'constexpr' requirement is ever lifted, use TIMER0_BASE_FREQUENCY instead
- */
-#define HAL_TIMER_RATE (F_CPU / 4) // i.e., 50MHz
-//#define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY
+// TODO: some calculations (step irq min_step_rate) require the timer rate to be known at compile time
+//       this is not possible with the HC32F460, as the timer rate depends on PCLK1
+//       as a workaround, PCLK1 = 50MHz is assumed (check with clock dump in MarlinHAL::init())
+#define HAL_TIMER_RATE 50000000 // 50MHz
+// #define HAL_TIMER_RATE TIMER0_BASE_FREQUENCY
+
+// TODO: CYCLES_PER_MICROSECOND seems to be used by Marlin to calculate the number of cycles per microsecond in the timer ISRs
+//       by default, it uses F_CPU, but since that is not known at compile time for HC32, we overwrite it here
+#undef CYCLES_PER_MICROSECOND
+#define CYCLES_PER_MICROSECOND (HAL_TIMER_RATE / 1000000UL)

 // Temperature timer
-#define TEMP_TIMER_NUM        (&temp_timer)
-#define TEMP_TIMER_PRIORITY   DDL_IRQ_PRIORITY_02
-#define TEMP_TIMER_PRESCALE     16UL          // 12.5MHz
-#define TEMP_TIMER_RATE       1000            // 1kHz
-#define TEMP_TIMER_FREQUENCY  TEMP_TIMER_RATE // 1kHz also
+#define TEMP_TIMER_NUM (&temp_timer)
+#define TEMP_TIMER_PRIORITY DDL_IRQ_PRIORITY_02
+#define TEMP_TIMER_PRESCALE 16ul
+#define TEMP_TIMER_RATE 1000                 // 1kHz
+#define TEMP_TIMER_FREQUENCY TEMP_TIMER_RATE // Alias for Marlin

 // Stepper timer
-#define STEP_TIMER_NUM         (&step_timer)
-#define STEP_TIMER_PRIORITY    DDL_IRQ_PRIORITY_00  // Top priority, nothing else uses it
-#define STEPPER_TIMER_PRESCALE  16UL                // 12.5MHz
+#define STEP_TIMER_NUM (&step_timer)
+#define STEP_TIMER_PRIORITY DDL_IRQ_PRIORITY_01
+#define STEPPER_TIMER_PRESCALE 16ul

-#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)  // 50MHz / 16 = 3.125MHz
-#define STEPPER_TIMER_TICKS_PER_US (STEPPER_TIMER_RATE / 1000000UL)   // Integer 3
+// TODO: STEPPER_TIMER_RATE seems to work fine like this, but requires further testing...
+#define STEPPER_TIMER_RATE (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE) // 50MHz / 16 = 3.125MHz
+#define STEPPER_TIMER_TICKS_PER_US (STEPPER_TIMER_RATE / 1000000)

 // Pulse timer (== stepper timer)
-#define PULSE_TIMER_NUM           STEP_TIMER_NUM
-#define PULSE_TIMER_PRESCALE      STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US  STEPPER_TIMER_TICKS_PER_US
+#define PULSE_TIMER_NUM STEP_TIMER_NUM
+#define PULSE_TIMER_PRESCALE STEPPER_TIMER_PRESCALE
+#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US

 //
 // Channel aliases
 //
-#define MF_TIMER_TEMP   TEMP_TIMER_NUM
-#define MF_TIMER_STEP   STEP_TIMER_NUM
-#define MF_TIMER_PULSE  PULSE_TIMER_NUM
+#define MF_TIMER_TEMP TEMP_TIMER_NUM
+#define MF_TIMER_STEP STEP_TIMER_NUM
+#define MF_TIMER_PULSE PULSE_TIMER_NUM

 //
 // HAL functions
@@ -37,10 +37,7 @@ Timer::Timer() {
 }

 Timer::~Timer() {
-  if (timerid != 0) {
-    timer_delete(timerid);
-    timerid = 0;
-  }
+  timer_delete(timerid);
 }

 void Timer::init(uint32_t sig_id, uint32_t sim_freq, callback_fn* fn) {
@@ -21,7 +21,6 @@
 */

 #ifdef __PLAT_LINUX__
-#ifndef UNIT_TEST

 //#define GPIO_LOGGING // Full GPIO and Positional Logging

@@ -136,5 +135,4 @@ int main() {
  read_serial.join();
 }

-#endif // UNIT_TEST
 #endif // __PLAT_LINUX__
@@ -1,125 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include "../shared/Delay.h"
-#include "../../../gcode/parser.h"
-
-DefaultSerial1 USBSerial(false, MCDCSerial0);
-
-uint32_t MarlinHAL::adc_result = 0;
-
-// U8glib required functions
-extern "C" {
-  void u8g_xMicroDelay(uint16_t val) { DELAY_US(val); }
-  void u8g_MicroDelay()              { u8g_xMicroDelay(1); }
-  void u8g_10MicroDelay()            { u8g_xMicroDelay(10); }
-  void u8g_Delay(uint16_t val)       { delay(val); }
-}
-
-// return free heap space
-int freeMemory() {
-  char stack_end;
-  void *heap_start = malloc(sizeof(uint32_t));
-  if (heap_start == 0) return 0;
-
-  uint32_t result = (uint32_t)&stack_end - (uint32_t)heap_start;
-  free(heap_start);
-  return result;
-}
-
-void MarlinHAL::reboot() { MCUCore::nvic_system_reset(); }
-
-uint8_t MarlinHAL::get_reset_source() {
-  #if ENABLED(USE_WATCHDOG)
-    if (watchdog_timed_out()) return RST_WATCHDOG;
-  #endif
-  return RST_POWER_ON;
-}
-
-void MarlinHAL::clear_reset_source() { watchdog_clear_timeout_flag(); }
-
-void flashFirmware(const int16_t) {
-  delay(500);          // Give OS time to disconnect
-  //USB_Connect(false);  // USB clear connection
-  delay(1000);         // Give OS time to notice
-  hal.reboot();
-}
-
-#if ENABLED(USE_WATCHDOG)
-
-  #define WDT_TIMEOUT TERN(WATCHDOG_DURATION_8S, 8.0f, 4.0f) // 4 or 8 second timeout
-
-  void MarlinHAL::watchdog_init() {
-    #if ENABLED(WATCHDOG_RESET_MANUAL)
-      // We enable the watchdog timer, but only for the interrupt.
-
-      // Configure WDT to only trigger an interrupt
-      // Disable WDT interrupt (just in case, to avoid triggering it!)
-      NVIC_DisableIRQ(WDT_IRQn);
-
-      // We NEED memory barriers to ensure Interrupts are actually disabled!
-      // ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
-      __DSB();
-      __ISB();
-
-      // WDT defaults to trigger an interrupt
-
-      // Configure and enable WDT interrupt.
-      NVIC_ClearPendingIRQ(WDT_IRQn);
-      NVIC_SetPriority(WDT_IRQn, 0); // Use highest priority, so we detect all kinds of lockups
-      NVIC_EnableIRQ(WDT_IRQn);
-    #else
-      MCUI::watchdog_set_timeout_triggers_reset();
-    #endif
-    MCUI::watchdog_set_timeout_in_seconds(WDT_TIMEOUT);
-    MCUI::watchdog_enable();
-  }
-
-  void MarlinHAL::watchdog_refresh() {
-    MCUI::watchdog_feed();
-    #if DISABLED(PINS_DEBUGGING) && PIN_EXISTS(LED)
-      static millis_t next_flash = millis();
-      if (ELAPSED(millis(), next_flash)) {
-        next_flash = millis() + 200;
-        TOGGLE(LED_PIN);  // heartbeat indicator
-      }
-    #endif
-  }
-
-  // Timeout state
-  bool MarlinHAL::watchdog_timed_out() { return MCUI::watchdog_has_triggered(); }
-  void MarlinHAL::watchdog_clear_timeout_flag() { MCUI::watchdog_clear_timeout_flag(); }
-
-#endif // USE_WATCHDOG
-
-// For M42/M43, scan command line for pin code
-//   return index into pin map array if found and the pin is valid.
-//   return dval if not found or not a valid pin.
-int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
-  const uint16_t val = (uint16_t)parser.intval(code, -1), port = val / 100, pin = val % 100;
-  const  int16_t ind = (port < ((NUM_DIGITAL_PINS) >> 5) && pin < 32) ? ((port << 5) | pin) : -2;
-  return ind > -1 ? ind : dval;
-}
-
-#endif // TARGET_LPC4078
@@ -1,276 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * HAL_LPC1768/HAL.h
- * Hardware Abstraction Layer for NXP LPC1768
- */
-
-#define CPU_32_BIT
-
-#include <stdint.h>
-#include <stdarg.h>
-#include <algorithm>
-
-#include "../shared/Marduino.h"
-#include "../shared/Delay.h"
-#include "../shared/math_32bit.h"
-#include "../shared/HAL_SPI.h"
-#include "fastio.h"
-#include "MarlinSerial.h"
-
-#include <mcu_interface.h>
-
-// ------------------------
-// Serial ports
-// ------------------------
-
-typedef ForwardSerial1Class< decltype(MCDCSerial0) > DefaultSerial1;
-extern DefaultSerial1 USBSerial;
-
-#define _MSERIAL(X) MSerial##X
-#define MSERIAL(X) _MSERIAL(X)
-
-#if SERIAL_PORT == -1
-  #define MYSERIAL1 USBSerial
-#elif WITHIN(SERIAL_PORT, 0, 3)
-  #define MYSERIAL1 MSERIAL(SERIAL_PORT)
-#else
-  #error "SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-#endif
-
-#ifdef SERIAL_PORT_2
-  #if SERIAL_PORT_2 == -1
-    #define MYSERIAL2 USBSerial
-  #elif WITHIN(SERIAL_PORT_2, 0, 3)
-    #define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
-  #else
-    #error "SERIAL_PORT_2 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef SERIAL_PORT_3
-  #if SERIAL_PORT_3 == -1
-    #define MYSERIAL3 USBSerial
-  #elif WITHIN(SERIAL_PORT_3, 0, 3)
-    #define MYSERIAL3 MSERIAL(SERIAL_PORT_3)
-  #else
-    #error "SERIAL_PORT_3 must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef MMU2_SERIAL_PORT
-  #if MMU2_SERIAL_PORT == -1
-    #define MMU2_SERIAL USBSerial
-  #elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
-    #define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
-  #else
-    #error "MMU2_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-#endif
-
-#ifdef LCD_SERIAL_PORT
-  #if LCD_SERIAL_PORT == -1
-    #define LCD_SERIAL USBSerial
-  #elif WITHIN(LCD_SERIAL_PORT, 0, 3)
-    #define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
-  #else
-    #error "LCD_SERIAL_PORT must be from 0 to 3. You can also use -1 if the board supports Native USB."
-  #endif
-  #if HAS_DGUS_LCD
-    #define SERIAL_GET_TX_BUFFER_FREE() LCD_SERIAL.available()
-  #endif
-#endif
-
-//
-// Interrupts
-//
-
-#define CRITICAL_SECTION_START()  const bool irqon = !MCUCore::primask(); MCUCore::nvic_interrupts_disable()
-#define CRITICAL_SECTION_END()    if (irqon) MCUCore::nvic_interrupts_enable()
-#define cli() noInterrupts()
-#define sei() interrupts()
-//
-// ADC
-//
-
-#define ADC_MEDIAN_FILTER_SIZE (23) // Higher values increase step delay (phase shift),
-                                    // (ADC_MEDIAN_FILTER_SIZE + 1) / 2 sample step delay (12 samples @ 500Hz: 24ms phase shift)
-                                    // Memory usage per ADC channel (bytes): (6 * ADC_MEDIAN_FILTER_SIZE) + 16
-                                    // 8 * ((6 * 23) + 16 ) = 1232 Bytes for 8 channels
-
-#define ADC_LOWPASS_K_VALUE    (2)  // Higher values increase rise time
-                                    // Rise time sample delays for 100% signal convergence on full range step
-                                    // (1 : 13, 2 : 32, 3 : 67, 4 : 139, 5 : 281, 6 : 565, 7 : 1135, 8 : 2273)
-                                    // K = 6, 565 samples, 500Hz sample rate, 1.13s convergence on full range step
-                                    // Memory usage per ADC channel (bytes): 4 (32 Bytes for 8 channels)
-
-#define HAL_ADC_VREF            3.3 // ADC voltage reference
-
-#define HAL_ADC_RESOLUTION     12   // 15 bit maximum, raw temperature is stored as int16_t
-#define HAL_ADC_FILTERED            // Disable oversampling done in Marlin as ADC values already filtered in HAL
-
-//
-// Pin Mapping for M42, M43, M226
-//
-
-// Test whether the pin is valid
-constexpr bool VALID_PIN(const pin_t pin) {
-  return MCUI::pin_is_valid(pin);
-}
-
-// Get the analog index for a digital pin
-constexpr int8_t DIGITAL_PIN_TO_ANALOG_PIN(const pin_t pin) {
-  return (MCUI::pin_is_valid(pin) && MCUI::pin_has_adc(pin)) ? pin : -1;
-}
-
-//
-// Misc. Functions
-//
-#ifndef analogInputToDigitalPin
-  #define analogInputToDigitalPin(p) (p)
-#endif
-
-
-// Return the index of a pin number
-constexpr int16_t GET_PIN_MAP_INDEX(const pin_t pin) {
-  return MCUI::pin_index(pin);
-}
-
-// Get the pin number at the given index
-constexpr pin_t GET_PIN_MAP_PIN(const int16_t index) {
-  return MCUI::pin_index(index);
-}
-
-// Parse a G-code word into a pin index
-int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
-// P0.6 thru P0.9 are for the onboard SD card
-#define HAL_SENSITIVE_PINS P0_06, P0_07, P0_08, P0_09,
-
-// ------------------------
-// Defines
-// ------------------------
-
-void flashFirmware(const int16_t);
-
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-
-// Default graphical display delays
-#define CPU_ST7920_DELAY_1 600
-#define CPU_ST7920_DELAY_2 750
-#define CPU_ST7920_DELAY_3 750
-
-// ------------------------
-// Free Memory Accessor
-// ------------------------
-
-#pragma GCC diagnostic push
-#if GCC_VERSION <= 50000
-  #pragma GCC diagnostic ignored "-Wunused-function"
-#endif
-
-int freeMemory();
-
-#pragma GCC diagnostic pop
-
-// ------------------------
-// MarlinHAL Class
-// ------------------------
-
-class MarlinHAL {
-public:
-
-  // Earliest possible init, before setup()
-  MarlinHAL() {}
-
-  static void init();          // Called early in setup()
-  static void init_board() {}  // Called less early in setup()
-  static void reboot();        // Restart the firmware from 0x0
-
-  // Interrupts
-  static bool isr_state() { return MCUCore::primask(); }
-  static void isr_on()  { MCUCore::nvic_interrupts_enable(); }
-  static void isr_off() {  MCUCore::nvic_interrupts_disable(); }
-
-  static void delay_ms(const int ms) { DELAY_US(ms * 1000); }
-
-  // Watchdog
-  static void watchdog_init() IF_DISABLED(USE_WATCHDOG, {});
-  static void watchdog_refresh() IF_DISABLED(USE_WATCHDOG, {});
-  static bool watchdog_timed_out() IF_DISABLED(USE_WATCHDOG, { return false; });
-  static void watchdog_clear_timeout_flag() IF_DISABLED(USE_WATCHDOG, {});
-
-  // Tasks, called from idle()
-  static void idletask();
-
-  // Reset
-  static uint8_t get_reset_source();
-  static void clear_reset_source();
-
-  // Free SRAM
-  static int freeMemory() { return ::freeMemory(); }
-
-  //
-  // ADC Methods
-  //
-
-  using FilteredADC = MCUI::ADC<ADC_LOWPASS_K_VALUE, ADC_MEDIAN_FILTER_SIZE>;
-
-  // Called by Temperature::init once at startup
-  static void adc_init() {
-    // Turn on and initialise ADC in burst mode
-    MCUI::adc_hardware.init();
-    MCUI::adc_hardware.burst_start();
-  }
-
-  // Called by Temperature::init for each sensor at startup
-  static void adc_enable(const pin_t pin) {
-    FilteredADC::enable_channel(pin);
-  }
-
-  // Begin ADC sampling on the given pin. Called from Temperature::isr!
-  static uint32_t adc_result;
-  static void adc_start(const pin_t pin) {
-    adc_result = FilteredADC::read(pin) >> (16 - HAL_ADC_RESOLUTION); // returns 16bit value, reduce to required bits
-  }
-
-  // Is the ADC ready for reading?
-  static bool adc_ready() { return true; }
-
-  // The current value of the ADC register
-  static uint16_t adc_value() { return uint16_t(adc_result); }
-
-  /**
-   * Set the PWM duty cycle for the pin to the given value.
-   * Optionally invert the duty cycle [default = false]
-   * Optionally change the scale of the provided value to enable finer PWM duty control [default = 255]
-   */
-  static void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size=255, const bool invert=false);
-
-  /**
-   * Set the frequency of the timer corresponding to the provided pin
-   * All Hardware PWM pins will run at the same frequency and
-   * All Software PWM pins will run at the same frequency
-   */
-  static void set_pwm_frequency(const pin_t pin, const uint16_t f_desired);
-};
@@ -1,376 +0,0 @@
-// /**
-//  * Marlin 3D Printer Firmware
-//  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
-//  *
-//  * Based on Sprinter and grbl.
-//  * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
-//  *
-//  * This program is free software: you can redistribute it and/or modify
-//  * it under the terms of the GNU General Public License as published by
-//  * the Free Software Foundation, either version 3 of the License, or
-//  * (at your option) any later version.
-//  *
-//  * This program is distributed in the hope that it will be useful,
-//  * but WITHOUT ANY WARRANTY; without even the implied warranty of
-//  * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
-//  * GNU General Public License for more details.
-//  *
-//  * You should have received a copy of the GNU General Public License
-//  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-//  *
-//  */
-
-// /**
-//  * Software SPI functions originally from Arduino Sd2Card Library
-//  * Copyright (c) 2009 by William Greiman
-//  */
-
-// /**
-//  * For TARGET_LPC4078
-//  */
-
-// /**
-//  * Hardware SPI and Software SPI implementations are included in this file.
-//  * The hardware SPI runs faster and has higher throughput but is not compatible
-//  * with some LCD interfaces/adapters.
-//  *
-//  * Control of the slave select pin(s) is handled by the calling routines.
-//  *
-//  * Some of the LCD interfaces/adapters result in the LCD SPI and the SD card
-//  * SPI sharing pins. The SCK, MOSI & MISO pins can NOT be set/cleared with
-//  * WRITE nor digitalWrite when the hardware SPI module within the LPC17xx is
-//  * active. If any of these pins are shared then the software SPI must be used.
-//  *
-//  * A more sophisticated hardware SPI can be found at the following link.
-//  * This implementation has not been fully debugged.
-//  * https://github.com/MarlinFirmware/Marlin/tree/071c7a78f27078fd4aee9a3ef365fcf5e143531e
-//  */
-
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include <SPI.h>
-
-// Hardware SPI and SPIClass
-
-#include "../shared/HAL_SPI.h"
-
-#define LPC_SOFTWARE_SPI
-
-// ------------------------
-// Public functions
-// ------------------------
-#if ENABLED(LPC_SOFTWARE_SPI)
-  #include "SoftwareSPI.h"
-
-  // Software SPI
-  static uint8_t SPI_speed = SPI_FULL_SPEED;
-
-  static uint8_t spiTransfer(uint8_t b) {
-    return swSpiTransfer(b, SPI_speed, SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
-  }
-
-  void spiBegin() {
-    swSpiBegin(SD_SCK_PIN, SD_MISO_PIN, SD_MOSI_PIN);
-  }
-
-  void spiInit(uint8_t spiRate) {
-    SPI_speed = swSpiInit(spiRate, SD_SCK_PIN, SD_MOSI_PIN);
-  }
-
-  uint8_t spiRec() { return spiTransfer(0xFF); }
-
-  void spiRead(uint8_t*buf, uint16_t nbyte) {
-    for (int i = 0; i < nbyte; i++)
-      buf[i] = spiTransfer(0xFF);
-  }
-
-  void spiSend(uint8_t b) { (void)spiTransfer(b); }
-
-  void spiSend(const uint8_t *buf, size_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
-    (void)spiTransfer(token);
-    for (uint16_t i = 0; i < 512; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-#else
-
-  #ifdef SD_SPI_SPEED
-    #define INIT_SPI_SPEED SD_SPI_SPEED
-  #else
-    #define INIT_SPI_SPEED SPI_FULL_SPEED
-  #endif
-
-  void spiBegin() { spiInit(INIT_SPI_SPEED); } // Set up SCK, MOSI & MISO pins for SSP0
-
-  void spiInit(uint8_t spiRate) {
-    #if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
-      SPI.setModule(1);
-    #elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
-      SPI.setModule(2);
-    #endif
-    SPI.setDataSize(DATA_SIZE_8BIT);
-    SPI.setDataMode(SPI_MODE0);
-
-    SPI.setClock(SPISettings::spiRate2Clock(spiRate));
-    SPI.begin();
-  }
-
-  static uint8_t doio(uint8_t b) {
-    return SPI.transfer(b & 0x00FF) & 0x00FF;
-  }
-
-  void spiSend(uint8_t b) { doio(b); }
-
-  void spiSend(const uint8_t *buf, size_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
-  }
-
-  void spiSend(uint32_t chan, byte b) {}
-
-  void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {}
-
-  // Read single byte from SPI
-  uint8_t spiRec() { return doio(0xFF); }
-
-  uint8_t spiRec(uint32_t chan) { return 0; }
-
-  // Read from SPI into buffer
-  void spiRead(uint8_t *buf, uint16_t nbyte) {
-    for (uint16_t i = 0; i < nbyte; i++) buf[i] = doio(0xFF);
-  }
-
-  uint8_t spiTransfer(uint8_t b) { return doio(b); }
-
-  // Write from buffer to SPI
-  void spiSendBlock(uint8_t token, const uint8_t *buf) {
-   (void)spiTransfer(token);
-    for (uint16_t i = 0; i < 512; i++)
-      (void)spiTransfer(buf[i]);
-  }
-
-  // Begin SPI transaction, set clock, bit order, data mode
-  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
-    // TODO: Implement this method
-  }
-
-#endif // LPC_SOFTWARE_SPI
-
-// /**
-//  * @brief Wait until TXE (tx empty) flag is set and BSY (busy) flag unset.
-//  */
-static inline void waitSpiTxEnd(void *spi_d) {
-  // while (SSP_GetStatus(spi_d, SSP_STAT_TXFIFO_EMPTY) == RESET) { /* nada */ } // wait until TXE=1
-  // while (SSP_GetStatus(spi_d, SSP_STAT_BUSY) == SET) { /* nada */ }     // wait until BSY=0
-}
-
-// // Retain the pin init state of the SPI, to avoid init more than once,
-// // even if more instances of SPIClass exist
-static bool spiInitialised[BOARD_NR_SPI] = {};
-
-SPIClass::SPIClass(uint8_t device) {
-//   // Init things specific to each SPI device
-//   // clock divider setup is a bit of hack, and needs to be improved at a later date.
-
-  #if BOARD_NR_SPI >= 1
-    _settings[0].device_id = 0;
-    _settings[0].m_config.pin_miso = BOARD_SPI1_MISO_PIN;
-    _settings[0].m_config.pin_mosi = BOARD_SPI1_MOSI_PIN;
-    _settings[0].m_config.pin_sck  = BOARD_SPI1_SCK_PIN;
-    _settings[0].m_config.pin_ssel = BOARD_SPI1_NSS_PIN;
-    _settings[0].m_config.frequency = 100000;
-    _settings[0].m_config.data_bits = 8;
-    _settings[0].m_config.mode = 0;
-    _settings[0].m_config.format = MCUI::SSP::Config::Format::SPI;
-
-
-//     _settings[0].dataMode = SPI_MODE0;
-//     _settings[0].dataSize = DATA_SIZE_8BIT;
-//     _settings[0].clock = SPI_CLOCK_MAX;
-//     //_settings[0].clockDivider = determine_baud_rate(_settings[0].spi_d, _settings[0].clock);
-  #endif
-
-  #if BOARD_NR_SPI >= 2
-    _settings[1].device_id = 2;
-    _settings[1].m_config.pin_miso = BOARD_SPI2_MISO_PIN;
-    _settings[1].m_config.pin_mosi = BOARD_SPI2_MOSI_PIN;
-    _settings[1].m_config.pin_sck  = BOARD_SPI2_SCK_PIN;
-    _settings[1].m_config.pin_ssel = BOARD_SPI2_NSS_PIN;
-//     _settings[1].dataMode = SPI_MODE0;
-//     _settings[1].dataSize = DATA_SIZE_8BIT;
-//     _settings[1].clock = SPI_CLOCK_MAX;
-//     //_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
-  #endif
-
-  #if BOARD_NR_SPI >= 3
-    _settings[2].device_id = 1;
-    _settings[2].m_config.pin_miso = BOARD_SPI3_MISO_PIN;
-    _settings[2].m_config.pin_mosi = BOARD_SPI3_MOSI_PIN;
-    _settings[2].m_config.pin_sck  = BOARD_SPI3_SCK_PIN;
-    _settings[2].m_config.pin_ssel = BOARD_SPI3_NSS_PIN;
-//     _settings[1].dataMode = SPI_MODE0;
-//     _settings[1].dataSize = DATA_SIZE_8BIT;
-//     _settings[1].clock = SPI_CLOCK_MAX;
-//     //_settings[1].clockDivider = determine_baud_rate(_settings[1].spi_d, _settings[1].clock);
-  #endif
-
-  setModule(device);
-
-//   // Init the GPDMA controller
-//   // TODO: call once in the constructor? or each time?
-//   GPDMA_Init();
-}
-
-SPIClass::SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel) {
-  #if BOARD_NR_SPI >= 1
-    if (mosi == BOARD_SPI1_MOSI_PIN) SPIClass(1);
-  #endif
-  #if BOARD_NR_SPI >= 2
-    if (mosi == BOARD_SPI2_MOSI_PIN) SPIClass(2);
-  #endif
-  #if BOARD_NR_SPI >= 3
-    if (mosi == BOARD_SPI3_MOSI_PIN) SPIClass(3);
-  #endif
-}
-
-void SPIClass::begin() {
-//   // Init the SPI pins in the first begin call
-  if ((_currentSetting->device_id == 0 && spiInitialised[0] == false) ||
-      (_currentSetting->device_id == 1 && spiInitialised[1] == false) ||
-      (_currentSetting->device_id == 2 && spiInitialised[2] == false)) {
-    MCUI::SSP::init(_currentSetting->device_id, _currentSetting->m_config);
-    spiInitialised[_currentSetting->device_id] = true;
-  }
-  updateSettings();
-}
-
-void SPIClass::beginTransaction(const SPISettings &cfg) {
-  setBitOrder(cfg.bitOrder);
-  setDataMode(cfg.dataMode);
-  setDataSize(cfg.dataSize);
-  //setClockDivider(determine_baud_rate(_currentSetting->spi_d, settings.clock));
-  begin();
-}
-
-uint8_t SPIClass::transfer(const uint16_t b) {
-  uint16_t rx_word = 0;
-  // clear rx fifo
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) == 1);
-  MCUI::SSP::write(_currentSetting->device_id, b);
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) != 1);
-  return rx_word;
-}
-
-uint16_t SPIClass::transfer16(const uint16_t data) {
-   return (transfer((data >> 8) & 0xFF) << 8) | (transfer(data & 0xFF) & 0xFF);
-}
-
-void SPIClass::end() {
-//   // Neither is needed for Marlin
-//   //SSP_Cmd(_currentSetting->spi_d, DISABLE);
-//   //SSP_DeInit(_currentSetting->spi_d);
-}
-
-void SPIClass::send(uint8_t data) {
-  MCUI::SSP::write(_currentSetting->device_id, data);
-}
-
-void SPIClass::dmaSend(void *buf, uint16_t length, bool minc) {
-//   //TODO: LPC dma can only write 0xFFF bytes at once.
-//   GPDMA_Channel_CFG_Type GPDMACfg;
-
-//   /* Configure GPDMA channel 0 -------------------------------------------------------------*/
-//   /* DMA Channel 0 */
-//   GPDMACfg.ChannelNum = 0;
-//   // Source memory
-//   GPDMACfg.SrcMemAddr = (uint32_t)buf;
-//   // Destination memory - Not used
-//   GPDMACfg.DstMemAddr = 0;
-//   // Transfer size
-//   GPDMACfg.TransferSize = length;
-//   // Transfer width
-//   GPDMACfg.TransferWidth = (_currentSetting->dataSize == DATA_SIZE_16BIT) ? GPDMA_WIDTH_HALFWORD : GPDMA_WIDTH_BYTE;
-//   // Transfer type
-//   GPDMACfg.TransferType = GPDMA_TRANSFERTYPE_M2P;
-//   // Source connection - unused
-//   GPDMACfg.SrcConn = 0;
-//   // Destination connection
-//   GPDMACfg.DstConn = (_currentSetting->spi_d == LPC_SSP0) ? GPDMA_CONN_SSP0_Tx : GPDMA_CONN_SSP1_Tx;
-
-//   GPDMACfg.DMALLI = 0;
-
-//   // Enable dma on SPI
-//   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, ENABLE);
-
-//   // Only increase memory if minc is true
-//   GPDMACfg.MemoryIncrease = (minc ? GPDMA_DMACCxControl_SI : 0);
-
-//   // Setup channel with given parameter
-//   GPDMA_Setup(&GPDMACfg);
-
-//   // Enable DMA
-//   GPDMA_ChannelCmd(0, ENABLE);
-
-//   // Wait for data transfer
-//   while (!GPDMA_IntGetStatus(GPDMA_STAT_RAWINTTC, 0) && !GPDMA_IntGetStatus(GPDMA_STAT_RAWINTERR, 0)) { }
-
-//   // Clear err and int
-//   GPDMA_ClearIntPending (GPDMA_STATCLR_INTTC, 0);
-//   GPDMA_ClearIntPending (GPDMA_STATCLR_INTERR, 0);
-
-//   // Disable DMA
-//   GPDMA_ChannelCmd(0, DISABLE);
-
-//   waitSpiTxEnd(_currentSetting->spi_d);
-
-//   SSP_DMACmd(_currentSetting->spi_d, SSP_DMA_TX, DISABLE);
-}
-
-uint16_t SPIClass::read() {
-  uint16_t rx_word = 0;
-  MCUI::SSP::read(_currentSetting->device_id, &rx_word);
-  return rx_word;
-}
-
-void SPIClass::read(uint8_t *buf, uint32_t len) {
-  uint16_t rx_word = 0;
-  // clear rx fifo
-  while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) == 1);
-  for (uint16_t i = 0; i < len; i++) {
-    MCUI::SSP::write(_currentSetting->device_id, 0xFF);
-    while(MCUI::SSP::read(_currentSetting->device_id, &rx_word) != 1);
-    buf[i] = rx_word;
-  }
-}
-
-void SPIClass::setClock(uint32_t clock) { _currentSetting->clock = clock; }
-
-void SPIClass::setModule(uint8_t device) { _currentSetting = &_settings[device - 1]; } // SPI channels are called 1, 2, and 3 but the array is zero-indexed
-
-void SPIClass::setBitOrder(uint8_t bitOrder) { _currentSetting->bitOrder = bitOrder; }
-
-void SPIClass::setDataMode(uint8_t dataMode) { _currentSetting->dataMode = dataMode; }
-
-void SPIClass::setDataSize(uint32_t dataSize) { _currentSetting->dataSize = dataSize; }
-
-// /**
-//  * Set up/tear down
-//  */
-void SPIClass::updateSettings() {
-  MCUI::SSP::configure(_currentSetting->device_id, _currentSetting->m_config);
-}
-
-SPIClass SPI(1);
-
-#if SD_MISO_PIN == BOARD_SPI1_MISO_PIN
-  SPIClass SPI(1);
-#elif SD_MISO_PIN == BOARD_SPI2_MISO_PIN
-  SPIClass SPI(2);
-#endif
-
-#endif // TARGET_LPC4078
@@ -1,45 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <SPI.h>
-
-/**
- * Marlin currently requires 3 SPI classes:
- *
- * SPIClass:
- *  This class is normally provided by frameworks and has a semi-default interface.
- *  This is needed because some libraries reference it globally.
- *
- * SPISettings:
- *  Container for SPI configs for SPIClass. As above, libraries may reference it globally.
- *
- * These two classes are often provided by frameworks so we cannot extend them to add
- * useful methods for Marlin.
- *
- * MarlinSPI:
- *  Provides the default SPIClass interface plus some Marlin goodies such as a simplified
- *  interface for SPI DMA transfer.
- *
- */
-
-using MarlinSPI = SPIClass;
@@ -1,78 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "MarlinSerial.h"
-
-#include "../../inc/MarlinConfig.h"
-
-MarlinCDCSerial MCDCSerial0;
-
-#define MarlinSerial(ID) \
-  MarlinSerial _MSerial##ID(ID); \
-  MSerialT MSerial##ID(true, _MSerial##ID)
-
-#if USING_HW_SERIAL0
-  MarlinSerial(0);
-#endif
-#if USING_HW_SERIAL1
-  MarlinSerial(1);
-#endif
-#if USING_HW_SERIAL2
-  MarlinSerial(2);
-#endif
-#if USING_HW_SERIAL3
-  MarlinSerial(3);
-#endif
-
-#if ENABLED(EMERGENCY_PARSER)
-
-  bool MarlinSerial::recv_callback(const char c) {
-    // Need to figure out which serial port we are and react in consequence (Marlin does not have CONTAINER_OF macro)
-    if (false) {}
-    #if USING_HW_SERIAL0
-      else if (this == &_MSerial0) emergency_parser.update(MSerial0.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL1
-      else if (this == &_MSerial1) emergency_parser.update(MSerial1.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL2
-      else if (this == &_MSerial2) emergency_parser.update(MSerial2.emergency_state, c);
-    #endif
-    #if USING_HW_SERIAL3
-      else if (this == &_MSerial3) emergency_parser.update(MSerial3.emergency_state, c);
-    #endif
-    return true;
-  }
-
-  #include "../../feature/e_parser.h"
-
-  EmergencyParser::State emergency_state;
-
-  bool CDC_RecvCallback(const char c) {
-    emergency_parser.update(emergency_state, c);
-    return true;
-  }
-
-#endif
-
-#endif // TARGET_LPC4078
@@ -1,108 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include <mcu_interface.h>
-#include <interface/uart.h>
-#include <driver/usb_cdc.h>
-
-#include <UART.h>
-
-#include "../../inc/MarlinConfigPre.h"
-#if ENABLED(EMERGENCY_PARSER)
-  #include "../../feature/e_parser.h"
-#endif
-#include "../../core/serial_hook.h"
-
-#ifndef SERIAL_PORT
-  #define SERIAL_PORT 0
-#endif
-#ifndef RX_BUFFER_SIZE
-  #define RX_BUFFER_SIZE 128
-#endif
-#ifndef TX_BUFFER_SIZE
-  #define TX_BUFFER_SIZE 32
-#endif
-
-class MarlinCDCSerial : public HardwareSerial {
-  public:
-    MarlinCDCSerial() {}
-    void begin(unsigned long baudrate) override {}
-    void begin(unsigned long baudrate, uint16_t config) override { }
-    void end() override { }
-    int available() override {
-      return MCUI::CDCSerial0::available();
-    }
-    int peek() override { char c = 0; return MCUI::CDCSerial0::peek((uint8_t*)&c)? c : -1; }
-    int read() override { char c = 0; return MCUI::CDCSerial0::read((uint8_t*)&c, 1)? c : -1; }
-    void flush() override {};
-    size_t write(uint8_t c) override { return write(&c, 1); }
-    size_t write(const uint8_t *buffer, size_t size) override { return MCUI::CDCSerial0::connected() ? MCUI::CDCSerial0::write(buffer, size) : 0; }
-    using Print::write;
-    operator bool() override { return true; }
-};
-extern MarlinCDCSerial MCDCSerial0;
-
-class MarlinSerial : public HardwareSerial {
-  public:
-    MarlinSerial(const uint32_t uart_id) : uart_device(uart_id) {}
-    void begin(unsigned long baudrate) override {
-      uart_device.configure_pins(P0_02, P0_03);
-      uart_device.init({ .baud = baudrate });
-      #if ENABLED(EMERGENCY_PARSER)
-      uart_device.set_rx_callback([this](char rx_value){ return this->recv_callback(rx_value); } );
-      #endif
-    }
-    void begin(unsigned long baudrate, uint16_t config) override {
-      begin(baudrate);
-    }
-    void end() override { }
-    int available() override {
-      return uart_device.rx_available();
-    }
-    int peek() override { char c = 0; return uart_device.peek(&c)? c : -1; }
-    int read() override { char c = 0; return uart_device.read(&c)? c : -1; }
-    void flush() override {};
-    size_t write(uint8_t c) override { return write(&c, 1); }
-    size_t write(const uint8_t *buffer, size_t size) override { return uart_device.write((const char *)buffer, size); }
-    using Print::write; // pull in write(str) and write(buf, size) from Print
-    operator bool() override { return true; }
-
-    bool recv_callback(char value);
-  private:
-    MCUI::BufferedUARTC uart_device;
-};
-
-// On LPC176x framework, HardwareSerial does not implement the same interface as Arduino's Serial, so overloads
-// of 'available' and 'read' method are not used in this multiple inheritance scenario.
-// Instead, use a ForwardSerial here that adapts the interface.
-typedef ForwardSerial1Class<MarlinSerial> MSerialT;
-extern MSerialT MSerial0;
-extern MSerialT MSerial1;
-extern MSerialT MSerial2;
-extern MSerialT MSerial3;
-
-// Consequently, we can't use a RuntimeSerial either. The workaround would be to use
-// a RuntimeSerial<ForwardSerial<MarlinSerial>> type here. Ignore for now until it's actually required.
-#if ENABLED(SERIAL_RUNTIME_HOOK)
-  #error "SERIAL_RUNTIME_HOOK is not yet supported for LPC176x."
-#endif
@@ -1,51 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include "HAL.h"
-
-#if ENABLED(POSTMORTEM_DEBUGGING)
-
-#include "../shared/MinSerial.h"
-#include <debug_frmwrk.h>
-
-static void TX(char c) { _DBC(c); }
-void install_min_serial() { HAL_min_serial_out = &TX; }
-
-#if DISABLED(DYNAMIC_VECTORTABLE)
-extern "C" {
-  __attribute__((naked)) void JumpHandler_ASM() {
-    __asm__ __volatile__ (
-      "b CommonHandler_ASM\n"
-    );
-  }
-  void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
-  void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
-}
-#endif
-
-#endif // POSTMORTEM_DEBUGGING
-#endif // TARGET_LPC4078
@@ -1,69 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * servo.h - Interrupt driven Servo library for Arduino using 16 bit timers- Version 2
- * Copyright (c) 2009 Michael Margolis.  All right reserved.
- *
- * This library is free software; you can redistribute it and/or
- * modify it under the terms of the GNU Lesser General Public
- * License as published by the Free Software Foundation; either
- * version 2.1 of the License, or (at your option) any later version.
- *
- * This library is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the GNU
- * Lesser General Public License for more details.
- *
- * You should have received a copy of the GNU Lesser General Public
- * License along with this library; if not, write to the Free Software
- * Foundation, Inc., 51 Franklin St, Fifth Floor, Boston, MA  02110-1301  USA
- */
-#pragma once
-
-/**
- * Based on "servo.h - Interrupt driven Servo library for Arduino using 16 bit timers -
- *           Version 2 Copyright (c) 2009 Michael Margolis.  All right reserved.
- *
- * The only modification was to update/delete macros to match the LPC176x.
- */
-
-#include <Servo.h>
-
-class libServo: public Servo {
-  public:
-  void move(const int value) {
-    constexpr uint16_t servo_delay[] = SERVO_DELAY;
-    static_assert(COUNT(servo_delay) == NUM_SERVOS, "SERVO_DELAY must be an array NUM_SERVOS long.");
-
-    if (attach(servo_info[servoIndex].Pin.nbr) >= 0) {    // try to reattach
-      write(value);
-      safe_delay(servo_delay[servoIndex]); // delay to allow servo to reach position
-      TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
-    }
-
-  }
-};
-
-class libServo;
-typedef libServo hal_servo_t;
@@ -1,47 +0,0 @@
-#ifdef TARGET_LPC4078
-
-#include <Arduino.h>
-#include "SoftwareSPI.h"
-
-#include <mcu_interface.h>
-
-uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) {
-  for (uint8_t i = 0; i < 8; i++) {
-    if (spi_speed == 0) {
-      MCUI::gpio_set(mosi_pin, !!(b & 0x80));
-      MCUI::gpio_set(sck_pin, HIGH);
-      b <<= 1;
-      if (miso_pin >= 0 && MCUI::gpio_get(miso_pin)) b |= 1;
-      MCUI::gpio_set(sck_pin, LOW);
-    }
-    else {
-      const uint8_t state = (b & 0x80) ? HIGH : LOW;
-      for (uint8_t j = 0; j < spi_speed; j++)
-        MCUI::gpio_set(mosi_pin, state);
-
-      for (uint8_t j = 0; j < spi_speed + (miso_pin >= 0 ? 0 : 1); j++)
-        MCUI::gpio_set(sck_pin, HIGH);
-
-      b <<= 1;
-      if (miso_pin >= 0 && MCUI::gpio_get(miso_pin)) b |= 1;
-
-      for (uint8_t j = 0; j < spi_speed; j++)
-        MCUI::gpio_set(sck_pin, LOW);
-    }
-  }
-  return b;
-}
-
-void swSpiBegin(const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin) {
-  pinMode(sck_pin, OUTPUT);
-  if (MCUI::pin_is_valid(miso_pin)) pinMode(miso_pin, INPUT);
-  pinMode(mosi_pin, OUTPUT);
-}
-
-uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin) {
-  MCUI::gpio_set(mosi_pin, HIGH);
-  MCUI::gpio_set(sck_pin, LOW);
-  return (SystemCoreClock == 120000000 ? 44 : 38) / std::pow(2, 6 - std::min(spiRate, (uint8_t)6));
-}
-
-#endif // TARGET_LPC4078
@@ -1,5 +0,0 @@
-#include <mcu_interface.h>
-
-uint8_t swSpiTransfer(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin);
-void swSpiBegin(const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin);
-uint8_t swSpiInit(const uint8_t spiRate, const pin_t sck_pin, const pin_t mosi_pin);
@@ -1,116 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-/**
- * Emulate EEPROM storage using Flash Memory
- *
- * Use a single 32K flash sector to store EEPROM data. To reduce the
- * number of erase operations a simple "leveling" scheme is used that
- * maintains a number of EEPROM "slots" within the larger flash sector.
- * Each slot is used in turn and the entire sector is only erased when all
- * slots have been used.
- *
- * A simple RAM image is used to hold the EEPROM data during I/O operations
- * and this is flushed to the next available slot when an update is complete.
- * If RAM usage becomes an issue we could store this image in one of the two
- * 16Kb I/O buffers (intended to hold DMA USB and Ethernet data, but currently
- * unused).
- */
-#include "../../inc/MarlinConfig.h"
-
-#include "../shared/eeprom_api.h"
-
-//#include <cstdio>
-
-#ifndef MARLIN_EEPROM_SIZE
-  #define MARLIN_EEPROM_SIZE 4032 // 4KB
-#endif
-
-size_t PersistentStore::capacity() { return 4032; }
-
-constexpr uint32_t page_size = MCUI::EEPROM::page_size;
-uint32_t buffered_page = 0;
-uint8_t page_buffer[page_size];
-bool buffered_page_dirty = false;
-
-bool PersistentStore::access_start() {
-  MCUI::EEPROM::init();
-  MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  if (buffered_page_dirty) {
-    MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-  }
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  uint32_t address = pos;
-  //printf("Marlin::eeprom::write(pos = %d, size = %d)\n", pos, size);
-  uint32_t value_index = 0;
-  for (uint32_t addr = address; addr < address + size; ++addr) {
-    uint32_t page_address = addr & 0xFFFFFFC0;
-    if (page_address != buffered_page) {
-      //printf("Marlin::eeprom::write(@%ld):: page change new(%ld) != current(%d)\n",addr, page_address, buffered_page);
-      if (buffered_page_dirty == true) MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-      buffered_page = page_address;
-      buffered_page_dirty = false;
-      MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-    }
-    page_buffer[addr & ~0xFFFFFFC0] = value[value_index++];
-    buffered_page_dirty = true;
-  }
-
-  pos += size;
-  crc16(crc, value, size);
-
-  return false;  // return true for any error
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  uint32_t address = pos;
-  //printf("Marlin::eeprom::read(pos = %d, size = %d, writing = %d)\n", pos, size, writing);
-  uint32_t value_index = 0;
-  for (uint32_t addr = address; addr < address + size; ++addr) {
-    uint32_t page_address = addr & 0xFFFFFFC0;
-    if (page_address != buffered_page) {
-      if (buffered_page_dirty) {
-        MCUI::EEPROM::write_page(buffered_page, page_buffer, page_size);
-        buffered_page_dirty = false;
-      }
-      buffered_page = page_address;
-      MCUI::EEPROM::read_page(buffered_page, page_buffer, page_size);
-    }
-    if (writing) value[value_index++] = page_buffer[addr & ~0xFFFFFFC0];
-    else crc16(crc, &page_buffer[addr & ~0xFFFFFFC0], 1);
-  }
-
-  if (writing) crc16(crc, value, size);
-  pos += size;
-
-  return false;  // return true for any error
-}
-
-#endif // TARGET_LPC4078
@@ -1,191 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Endstop Interrupts
- *
- * Without endstop interrupts the endstop pins must be polled continually in
- * the temperature-ISR via endstops.update(), most of the time finding no change.
- * With this feature endstops.update() is called only when we know that at
- * least one endstop has changed state, saving valuable CPU cycles.
- *
- * This feature only works when all used endstop pins can generate an 'external interrupt'.
- *
- * Test whether pins issue interrupts on your board by flashing 'pin_interrupt_test.ino'.
- * (Located in Marlin/buildroot/share/pin_interrupt_test/pin_interrupt_test.ino)
- */
-
-#include "../../module/endstops.h"
-
-// One ISR for all EXT-Interrupts
-void endstop_ISR() { endstops.update(); }
-
-void setup_endstop_interrupts() {
-  #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  #define LPC1768_PIN_INTERRUPT_M(pin) ((pin >> 0x5 & 0x7) == 0 || (pin >> 0x5 & 0x7) == 2)
-
-  #if HAS_X_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(X_MAX_PIN)
-      #error "X_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(X_MAX_PIN);
-  #endif
-  #if HAS_X_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(X_MIN_PIN)
-      #error "X_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(X_MIN_PIN);
-  #endif
-  #if HAS_Y_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Y_MAX_PIN)
-      #error "Y_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Y_MAX_PIN);
-  #endif
-  #if HAS_Y_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Y_MIN_PIN)
-      #error "Y_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Y_MIN_PIN);
-  #endif
-  #if HAS_Z_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MAX_PIN)
-      #error "Z_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z_MAX_PIN);
-  #endif
-  #if HAS_Z_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PIN)
-      #error "Z_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-     _ATTACH(Z_MIN_PIN);
-  #endif
-  #if HAS_Z2_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z2_MAX_PIN)
-      #error "Z2_MAX_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z2_MAX_PIN);
-  #endif
-  #if HAS_Z2_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z2_MIN_PIN)
-      #error "Z2_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z2_MIN_PIN);
-  #endif
-  #if HAS_Z3_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z3_MAX_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z3_MAX_PIN);
-  #endif
-  #if HAS_Z3_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z3_MIN_PIN)
-      #error "Z3_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z3_MIN_PIN);
-  #endif
-  #if HAS_Z4_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(Z4_MAX_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z4_MAX_PIN);
-  #endif
-  #if HAS_Z4_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z4_MIN_PIN)
-      #error "Z4_MIN_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z4_MIN_PIN);
-  #endif
-  #if HAS_Z_MIN_PROBE_PIN
-    #if !LPC1768_PIN_INTERRUPT_M(Z_MIN_PROBE_PIN)
-      #error "Z_MIN_PROBE_PIN is not INTERRUPT-capable. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
-    #endif
-    _ATTACH(Z_MIN_PROBE_PIN);
-  #endif
-  #if HAS_I_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(I_MAX_PIN)
-      #error "I_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(I_MAX_PIN);
-  #elif HAS_I_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(I_MIN_PIN)
-      #error "I_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(I_MIN_PIN);
-  #endif
-  #if HAS_J_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(J_MAX_PIN)
-      #error "J_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(J_MAX_PIN);
-  #elif HAS_J_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(J_MIN_PIN)
-      #error "J_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(J_MIN_PIN);
-  #endif
-  #if HAS_K_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(K_MAX_PIN)
-      #error "K_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(K_MAX_PIN);
-  #elif HAS_K_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(K_MIN_PIN)
-      #error "K_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(K_MIN_PIN);
-  #endif
-  #if HAS_U_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(U_MAX_PIN)
-      #error "U_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(U_MAX_PIN);
-  #elif HAS_U_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(U_MIN_PIN)
-      #error "U_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(U_MIN_PIN);
-  #endif
-  #if HAS_V_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(V_MAX_PIN)
-      #error "V_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(V_MAX_PIN);
-  #elif HAS_V_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(V_MIN_PIN)
-      #error "V_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(V_MIN_PIN);
-  #endif
-  #if HAS_W_MAX
-    #if !LPC1768_PIN_INTERRUPT_M(W_MAX_PIN)
-      #error "W_MAX_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(W_MAX_PIN);
-  #elif HAS_W_MIN
-    #if !LPC1768_PIN_INTERRUPT_M(W_MIN_PIN)
-      #error "W_MIN_PIN is not INTERRUPT-capable."
-    #endif
-    _ATTACH(W_MIN_PIN);
-  #endif
-}
@@ -1,37 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include <mcu_interface.h>
-
-void MarlinHAL::set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255*/, const bool invert/*=false*/) {
-  if (!MCUI::pin_is_valid(pin)) return;
-  if (MCUI::pwm_attach_pin(pin))
-    MCUI::pwm_write_ratio(pin, invert ? 1.0f - (float)v / v_size : (float)v / v_size);  // map 1-254 onto PWM range
-}
-
-void MarlinHAL::set_pwm_frequency(const pin_t pin, const uint16_t f_desired) {
-  MCUI::pwm_set_frequency(pin, f_desired);
-}
-
-#endif // TARGET_LPC4078
@@ -1,120 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Fast I/O Routines for LPC1768/9
- * Use direct port manipulation to save scads of processor time.
- * Contributed by Triffid_Hunter and modified by Kliment, thinkyhead, Bob-the-Kuhn, et.al.
- */
-
-/**
- * Description: Fast IO functions LPC1768
- *
- * For TARGET LPC1768
- */
-
-#include "../shared/Marduino.h"
-#include <mcu_interface.h>
-
-#define PWM_PIN(P)            true // all pins are software PWM capable
-
-#define LPC_PIN(pin)          MCUI::gpio_pin(pin)
-#define LPC_GPIO(port)        MCUI::gpio_port(port)
-
-#define SET_DIR_INPUT(IO)     MCUI::gpio_set_input(IO)
-#define SET_DIR_OUTPUT(IO)    MCUI::gpio_set_output(IO)
-
-#define SET_MODE(IO, mode)    pinMode(IO, mode)
-
-#define WRITE_PIN_SET(IO)     MCUI::gpio_set(IO)
-#define WRITE_PIN_CLR(IO)     MCUI::gpio_clear(IO)
-
-#define READ_PIN(IO)          MCUI::gpio_get(IO)
-#define WRITE_PIN(IO,V)       MCUI::gpio_set(IO, V)
-
-/**
- * Magic I/O routines
- *
- * Now you can simply SET_OUTPUT(STEP); WRITE(STEP, HIGH); WRITE(STEP, LOW);
- *
- * Why double up on these macros? see https://gcc.gnu.org/onlinedocs/gcc-4.8.5/cpp/Stringification.html
- */
-
-/// Read a pin
-#define _READ(IO)             READ_PIN(IO)
-
-/// Write to a pin
-#define _WRITE(IO,V)          WRITE_PIN(IO,V)
-
-/// toggle a pin
-#define _TOGGLE(IO)           MCUI::gpio_toggle(IO)
-
-/// set pin as input
-#define _SET_INPUT(IO)        SET_DIR_INPUT(IO)
-
-/// set pin as output
-#define _SET_OUTPUT(IO)       SET_DIR_OUTPUT(IO)
-
-/// set pin as input with pullup mode
-#define _PULLUP(IO,V)         pinMode(IO, (V) ? INPUT_PULLUP : INPUT)
-
-/// set pin as input with pulldown mode
-#define _PULLDOWN(IO,V)       pinMode(IO, (V) ? INPUT_PULLDOWN : INPUT)
-
-/// check if pin is an input
-#define _IS_INPUT(IO)         (!MCUI::gpio_get_dir(IO))
-
-/// check if pin is an output
-#define _IS_OUTPUT(IO)        (MCUI::gpio_get_dir(IO))
-
-/// Read a pin wrapper
-#define READ(IO)              _READ(IO)
-
-/// Write to a pin wrapper
-#define WRITE(IO,V)           _WRITE(IO,V)
-
-/// toggle a pin wrapper
-#define TOGGLE(IO)            _TOGGLE(IO)
-
-/// set pin as input wrapper
-#define SET_INPUT(IO)         _SET_INPUT(IO)
-/// set pin as input with pullup wrapper
-#define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _PULLUP(IO, HIGH); }while(0)
-/// set pin as input with pulldown wrapper
-#define SET_INPUT_PULLDOWN(IO) do{ _SET_INPUT(IO); _PULLDOWN(IO, HIGH); }while(0)
-/// set pin as output wrapper  -  reads the pin and sets the output to that value
-#define SET_OUTPUT(IO)        do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0)
-// set pin as PWM
-#define SET_PWM               SET_OUTPUT
-
-/// check if pin is an input wrapper
-#define IS_INPUT(IO)          _IS_INPUT(IO)
-/// check if pin is an output wrapper
-#define IS_OUTPUT(IO)         _IS_OUTPUT(IO)
-
-// Shorthand
-#define OUT_WRITE(IO,V)       do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
-
-// digitalRead/Write wrappers
-#define extDigitalRead(IO)    digitalRead(IO)
-#define extDigitalWrite(IO,V) digitalWrite(IO,V)
@@ -1,22 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
@@ -1,26 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if DISABLED(NO_SD_HOST_DRIVE)
-  #define HAS_SD_HOST_DRIVE 1
-#endif
@@ -1,34 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#if USE_FALLBACK_EEPROM
-  #define FLASH_EEPROM_EMULATION
-#elif ANY(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
-#endif
-
-// LPC1768 boards seem to lose steps when saving to EEPROM during print (issue #20785)
-// TODO: Which other boards are incompatible?
-#if defined(MCU_LPC1768) && ENABLED(FLASH_EEPROM_EMULATION) && PRINTCOUNTER_SAVE_INTERVAL > 0
-  #define PRINTCOUNTER_SYNC 1
-#endif
@@ -1,22 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
@@ -1,276 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-// #if PIO_PLATFORM_VERSION < 1001
-//   #error "nxplpc-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries. You may need to remove the platform and let it reinstall automatically."
-// #endif
-// #if PIO_FRAMEWORK_VERSION < 2006
-//   #error "framework-arduino-lpc176x package is out of date, Please update the PlatformIO platforms, frameworks and libraries."
-// #endif
-
-/**
- * Detect an old pins file by checking for old ADC pins values.
- */
-#define _OLD_TEMP_PIN(P) PIN_EXISTS(P) && _CAT(P,_PIN) <= 7 && !WITHIN(_CAT(P,_PIN), TERN(LPC1768_IS_SKRV1_3, 0, 2), 3)  // Include P0_00 and P0_01 for SKR V1.3 board
-#if _OLD_TEMP_PIN(TEMP_BED)
-  #error "TEMP_BED_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_0)
-  #error "TEMP_0_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_1)
-  #error "TEMP_1_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_2)
-  #error "TEMP_2_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_3)
-  #error "TEMP_3_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_4)
-  #error "TEMP_4_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_5)
-  #error "TEMP_5_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_6)
-  #error "TEMP_6_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#elif _OLD_TEMP_PIN(TEMP_7)
-  #error "TEMP_7_PIN must be defined using the Pn_nn or Pn_nn_An format. (See the included pins files)."
-#endif
-#undef _OLD_TEMP_PIN
-
-/**
- * Because PWM hardware channels all share the same frequency, along with the
- * fallback software channels, FAST_PWM_FAN is incompatible with Servos.
- */
-static_assert(!(NUM_SERVOS && ENABLED(FAST_PWM_FAN)), "BLTOUCH and Servos are incompatible with FAST_PWM_FAN on LPC176x boards.");
-
-#if SPINDLE_LASER_FREQUENCY
-  static_assert(!NUM_SERVOS, "BLTOUCH and Servos are incompatible with SPINDLE_LASER_FREQUENCY on LPC176x boards.");
-#endif
-
-/**
- * Test LPC176x-specific configuration values for errors at compile-time.
- */
-
-//#if ENABLED(SPINDLE_LASER_USE_PWM) && !(SPINDLE_LASER_PWM_PIN == 4 || SPINDLE_LASER_PWM_PIN == 6 || SPINDLE_LASER_PWM_PIN == 11)
-//  #error "SPINDLE_LASER_PWM_PIN must use SERVO0, SERVO1 or SERVO3 connector"
-//#endif
-
-#if MB(RAMPS_14_RE_ARM_EFB, RAMPS_14_RE_ARM_EEB, RAMPS_14_RE_ARM_EFF, RAMPS_14_RE_ARM_EEF, RAMPS_14_RE_ARM_SF)
-  #if IS_RRD_FG_SC && HAS_DRIVER(TMC2130) && DISABLED(TMC_USE_SW_SPI)
-    #error "Re-ARM with REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER and TMC2130 requires TMC_USE_SW_SPI."
-  #endif
-#endif
-
-static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported on LPC176x.");
-
-/**
- * Flag any serial port conflicts
- *
- *   Port  |  TX   |  RX   |
- *    ---  |  ---  |  ---  |
- * Serial  | P0_02 | P0_03 |
- * Serial1 | P0_15 | P0_16 |
- * Serial2 | P0_10 | P0_11 |
- * Serial3 | P0_00 | P0_01 |
- */
-#define ANY_TX(N,V...) DO(IS_TX##N,||,V)
-#define ANY_RX(N,V...) DO(IS_RX##N,||,V)
-
-#if USING_HW_SERIAL0
-  #define IS_TX0(P) (P == P0_02)
-  #define IS_RX0(P) (P == P0_03)
-  #if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
-    #error "Serial port pins (0) conflict with Trinamic SPI pins!"
-  #elif HAS_PRUSA_MMU1 && (IS_TX0(E_MUX1_PIN) || IS_RX0(E_MUX0_PIN))
-    #error "Serial port pins (0) conflict with Multi-Material-Unit multiplexer pins!"
-  #elif (AXIS_HAS_SPI(X) && IS_TX0(X_CS_PIN)) || (AXIS_HAS_SPI(Y) && IS_RX0(Y_CS_PIN))
-    #error "Serial port pins (0) conflict with X/Y axis SPI pins!"
-  #endif
-  #undef IS_TX0
-  #undef IS_RX0
-#endif
-
-#if USING_HW_SERIAL1
-  #define IS_TX1(P) (P == P0_15)
-  #define IS_RX1(P) (P == P0_16)
-  #define _IS_TX1_1 IS_TX1
-  #define _IS_RX1_1 IS_RX1
-  #if IS_TX1(TMC_SW_SCK)
-    #error "Serial port pins (1) conflict with other pins!"
-  #elif HAS_ROTARY_ENCODER
-    #if IS_TX1(BTN_EN2) || IS_RX1(BTN_EN1)
-      #error "Serial port pins (1) conflict with Encoder Buttons!"
-    #elif ANY_TX(1, SD_SCK_PIN, LCD_PINS_D4, DOGLCD_SCK, LCD_RESET_PIN, LCD_PINS_RS, SHIFT_CLK_PIN) \
-       || ANY_RX(1, LCD_SDSS, LCD_PINS_RS, SD_MISO_PIN, DOGLCD_A0, SD_SS_PIN, LCD_SDSS, DOGLCD_CS, LCD_RESET_PIN, LCD_BACKLIGHT_PIN)
-      #error "Serial port pins (1) conflict with LCD pins!"
-    #endif
-  #endif
-  #undef IS_TX1
-  #undef IS_RX1
-  #undef _IS_TX1_1
-  #undef _IS_RX1_1
-#endif
-
-#if USING_HW_SERIAL2
-  #define IS_TX2(P) (P == P0_10)
-  #define IS_RX2(P) (P == P0_11)
-  #define _IS_TX2_1 IS_TX2
-  #define _IS_RX2_1 IS_RX2
-  #if IS_TX2(X2_ENABLE_PIN) || ANY_RX(2, X2_DIR_PIN, X2_STEP_PIN) || (AXIS_HAS_SPI(X2) && IS_TX2(X2_CS_PIN))
-    #error "Serial port pins (2) conflict with X2 pins!"
-  #elif IS_TX2(Y2_ENABLE_PIN) || ANY_RX(2, Y2_DIR_PIN, Y2_STEP_PIN) || (AXIS_HAS_SPI(Y2) && IS_TX2(Y2_CS_PIN))
-    #error "Serial port pins (2) conflict with Y2 pins!"
-  #elif IS_TX2(Z2_ENABLE_PIN) || ANY_RX(2, Z2_DIR_PIN, Z2_STEP_PIN) || (AXIS_HAS_SPI(Z2) && IS_TX2(Z2_CS_PIN))
-    #error "Serial port pins (2) conflict with Z2 pins!"
-  #elif IS_TX2(Z3_ENABLE_PIN) || ANY_RX(2, Z3_DIR_PIN, Z3_STEP_PIN) || (AXIS_HAS_SPI(Z3) && IS_TX2(Z3_CS_PIN))
-    #error "Serial port pins (2) conflict with Z3 pins!"
-  #elif IS_TX2(Z4_ENABLE_PIN) || ANY_RX(2, Z4_DIR_PIN, Z4_STEP_PIN) || (AXIS_HAS_SPI(Z4) && IS_TX2(Z4_CS_PIN))
-    #error "Serial port pins (2) conflict with Z4 pins!"
-  #elif ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
-    #error "Serial port pins (2) conflict with other pins!"
-  #elif Y_HOME_TO_MIN && IS_TX2(Y_STOP_PIN)
-    #error "Serial port pins (2) conflict with Y endstop pin!"
-  #elif USES_Z_MIN_PROBE_PIN && IS_TX2(Z_MIN_PROBE_PIN)
-    #error "Serial port pins (2) conflict with probe pin!"
-  #elif ANY_TX(2, X_ENABLE_PIN, Y_ENABLE_PIN) || ANY_RX(2, X_DIR_PIN, Y_DIR_PIN)
-    #error "Serial port pins (2) conflict with X/Y stepper pins!"
-  #elif HAS_MULTI_EXTRUDER && (IS_TX2(E1_ENABLE_PIN) || (AXIS_HAS_SPI(E1) && IS_TX2(E1_CS_PIN)))
-    #error "Serial port pins (2) conflict with E1 stepper pins!"
-  #elif EXTRUDERS && ANY_RX(2, E0_DIR_PIN, E0_STEP_PIN)
-    #error "Serial port pins (2) conflict with E stepper pins!"
-  #endif
-  #undef IS_TX2
-  #undef IS_RX2
-  #undef _IS_TX2_1
-  #undef _IS_RX2_1
-#endif
-
-#if USING_HW_SERIAL3
-  #define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
-  #define PIN_IS_RX3(P) (P##_PIN == P0_01)
-  #if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
-    #error "Serial port pins (3) conflict with X endstop pins!"
-  #elif PIN_IS_TX3(Y_SERIAL_TX) || PIN_IS_TX3(Y_SERIAL_RX) || PIN_IS_RX3(X_SERIAL_TX) || PIN_IS_RX3(X_SERIAL_RX)
-    #error "Serial port pins (3) conflict with X/Y axis UART pins!"
-  #elif PIN_IS_TX3(X2_DIR) || PIN_IS_RX3(X2_STEP)
-    #error "Serial port pins (3) conflict with X2 pins!"
-  #elif PIN_IS_TX3(Y2_DIR) || PIN_IS_RX3(Y2_STEP)
-    #error "Serial port pins (3) conflict with Y2 pins!"
-  #elif PIN_IS_TX3(Z2_DIR) || PIN_IS_RX3(Z2_STEP)
-    #error "Serial port pins (3) conflict with Z2 pins!"
-  #elif PIN_IS_TX3(Z3_DIR) || PIN_IS_RX3(Z3_STEP)
-    #error "Serial port pins (3) conflict with Z3 pins!"
-  #elif PIN_IS_TX3(Z4_DIR) || PIN_IS_RX3(Z4_STEP)
-    #error "Serial port pins (3) conflict with Z4 pins!"
-  #elif HAS_MULTI_EXTRUDER && (PIN_IS_TX3(E1_DIR) || PIN_IS_RX3(E1_STEP))
-    #error "Serial port pins (3) conflict with E1 pins!"
-  #endif
-  #undef PIN_IS_TX3
-  #undef PIN_IS_RX3
-#endif
-
-#undef ANY_TX
-#undef ANY_RX
-
-//
-// Flag any i2c pin conflicts
-//
-#if ANY(HAS_MOTOR_CURRENT_I2C, HAS_MOTOR_CURRENT_DAC, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
-  #define USEDI2CDEV_M 1  // <Arduino>/Wire.cpp
-
-  #if USEDI2CDEV_M == 0         // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)
-    #define PIN_IS_SDA0(P) (P##_PIN == P0_27)
-    #define IS_SCL0(P)     (P == P0_28)
-    #if ENABLED(SDSUPPORT) && PIN_IS_SDA0(SD_DETECT)
-      #error "SDA0 overlaps with SD_DETECT_PIN!"
-    #elif PIN_IS_SDA0(E0_AUTO_FAN)
-      #error "SDA0 overlaps with E0_AUTO_FAN_PIN!"
-    #elif PIN_IS_SDA0(BEEPER)
-      #error "SDA0 overlaps with BEEPER_PIN!"
-    #elif IS_SCL0(BTN_ENC)
-      #error "SCL0 overlaps with Encoder Button!"
-    #elif IS_SCL0(SD_SS_PIN)
-      #error "SCL0 overlaps with SD_SS_PIN!"
-    #elif IS_SCL0(LCD_SDSS)
-      #error "SCL0 overlaps with LCD_SDSS!"
-    #endif
-    #undef PIN_IS_SDA0
-    #undef IS_SCL0
-  #elif USEDI2CDEV_M == 1       // P0_00 [D20] (SCA) ............ P0_01 [D21] (SCL)
-    #define PIN_IS_SDA1(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
-    #define PIN_IS_SCL1(P) (P##_PIN == P0_01)
-    #if PIN_IS_SDA1(X_MIN) || PIN_IS_SCL1(X_MAX)
-      #error "One or more i2c (1) pins overlaps with X endstop pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(X2_DIR) || PIN_IS_SCL1(X2_STEP)
-      #error "One or more i2c (1) pins overlaps with X2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Y2_DIR) || PIN_IS_SCL1(Y2_STEP)
-      #error "One or more i2c (1) pins overlaps with Y2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z2_DIR) || PIN_IS_SCL1(Z2_STEP)
-      #error "One or more i2c (1) pins overlaps with Z2 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z3_DIR) || PIN_IS_SCL1(Z3_STEP)
-      #error "One or more i2c (1) pins overlaps with Z3 pins! Disable i2c peripherals."
-    #elif PIN_IS_SDA1(Z4_DIR) || PIN_IS_SCL1(Z4_STEP)
-      #error "One or more i2c (1) pins overlaps with Z4 pins! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && (PIN_IS_SDA1(E1_DIR) || PIN_IS_SCL1(E1_STEP))
-      #error "One or more i2c (1) pins overlaps with E1 pins! Disable i2c peripherals."
-    #endif
-    #undef PIN_IS_SDA1
-    #undef PIN_IS_SCL1
-  #elif USEDI2CDEV_M == 2     // P0_10 [D38] (X_ENABLE_PIN) ... P0_11 [D55] (X_DIR_PIN)
-    #define PIN_IS_SDA2(P) (P##_PIN == P0_10)
-    #define PIN_IS_SCL2(P) (P##_PIN == P0_11)
-    #if PIN_IS_SDA2(Y_STOP)
-      #error "i2c SDA2 overlaps with Y endstop pin!"
-    #elif USES_Z_MIN_PROBE_PIN && PIN_IS_SDA2(Z_MIN_PROBE)
-      #error "i2c SDA2 overlaps with Z probe pin!"
-    #elif PIN_IS_SDA2(X_ENABLE) || PIN_IS_SDA2(Y_ENABLE)
-      #error "i2c SDA2 overlaps with X/Y ENABLE pin!"
-    #elif AXIS_HAS_SPI(X) && PIN_IS_SDA2(X_CS)
-      #error "i2c SDA2 overlaps with X CS pin!"
-    #elif PIN_IS_SDA2(X2_ENABLE)
-      #error "i2c SDA2 overlaps with X2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Y2_ENABLE)
-      #error "i2c SDA2 overlaps with Y2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z2_ENABLE)
-      #error "i2c SDA2 overlaps with Z2 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z3_ENABLE)
-      #error "i2c SDA2 overlaps with Z3 enable pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(Z4_ENABLE)
-      #error "i2c SDA2 overlaps with Z4 enable pin! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && PIN_IS_SDA2(E1_ENABLE)
-      #error "i2c SDA2 overlaps with E1 enable pin! Disable i2c peripherals."
-    #elif HAS_MULTI_EXTRUDER && AXIS_HAS_SPI(E1) && PIN_IS_SDA2(E1_CS)
-      #error "i2c SDA2 overlaps with E1 CS pin! Disable i2c peripherals."
-    #elif EXTRUDERS && (PIN_IS_SDA2(E0_STEP) || PIN_IS_SDA2(E0_DIR))
-      #error "i2c SCL2 overlaps with E0 STEP/DIR pin! Disable i2c peripherals."
-    #elif PIN_IS_SDA2(X_DIR) || PIN_IS_SDA2(Y_DIR)
-      #error "One or more i2c pins overlaps with X/Y DIR pin! Disable i2c peripherals."
-    #endif
-    #undef PIN_IS_SDA2
-    #undef PIN_IS_SCL2
-  #endif
-
-  #undef USEDI2CDEV_M
-#endif
-
-#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
-  #error "SERIAL_STATS_MAX_RX_QUEUED is not supported on LPC176x."
-#elif ENABLED(SERIAL_STATS_DROPPED_RX)
-  #error "SERIAL_STATS_DROPPED_RX is not supported on LPX176x."
-#endif
@@ -1,209 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../../shared/HAL_SPI.h"
-
-#include <stdint.h>
-#include <mcu_interface.h>
-
-//#define MSBFIRST 1
-
-#define SPI_MODE0 0
-#define SPI_MODE1 1
-#define SPI_MODE2 2
-#define SPI_MODE3 3
-
-#define SSP_CR0_DSS(n)  ((uint32_t)((n-1)&0xF))
-#define SSP_DATABIT_4		SSP_CR0_DSS(4) 			/*!< Databit number = 4 */
-#define SSP_DATABIT_5		SSP_CR0_DSS(5) 			/*!< Databit number = 5 */
-#define SSP_DATABIT_6		SSP_CR0_DSS(6) 			/*!< Databit number = 6 */
-#define SSP_DATABIT_7		SSP_CR0_DSS(7) 			/*!< Databit number = 7 */
-#define SSP_DATABIT_8		SSP_CR0_DSS(8) 			/*!< Databit number = 8 */
-#define SSP_DATABIT_9		SSP_CR0_DSS(9) 			/*!< Databit number = 9 */
-#define SSP_DATABIT_10		SSP_CR0_DSS(10) 		/*!< Databit number = 10 */
-#define SSP_DATABIT_11		SSP_CR0_DSS(11) 		/*!< Databit number = 11 */
-#define SSP_DATABIT_12		SSP_CR0_DSS(12) 		/*!< Databit number = 12 */
-#define SSP_DATABIT_13		SSP_CR0_DSS(13) 		/*!< Databit number = 13 */
-#define SSP_DATABIT_14		SSP_CR0_DSS(14) 		/*!< Databit number = 14 */
-#define SSP_DATABIT_15		SSP_CR0_DSS(15) 		/*!< Databit number = 15 */
-#define SSP_DATABIT_16		SSP_CR0_DSS(16) 		/*!< Databit number = 16 */
-
-#define DATA_SIZE_8BIT SSP_DATABIT_8
-#define DATA_SIZE_16BIT SSP_DATABIT_16
-
-#define SPI_CLOCK_MAX_TFT  30000000UL
-#define SPI_CLOCK_DIV2     8333333 //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
-#define SPI_CLOCK_DIV4     4166667 //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
-#define SPI_CLOCK_DIV8     2083333 //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
-#define SPI_CLOCK_DIV16    1000000 //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
-#define SPI_CLOCK_DIV32     500000 //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
-#define SPI_CLOCK_DIV64     250000 //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
-#define SPI_CLOCK_DIV128    125000 //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
-
-#define SPI_CLOCK_MAX SPI_CLOCK_DIV2
-
-#define BOARD_NR_SPI 3
-
-// SSP0 TMC port
-#define BOARD_SPI1_NSS_PIN      P_NC
-#define BOARD_SPI1_SCK_PIN      P1_20
-#define BOARD_SPI1_MISO_PIN     P1_23
-#define BOARD_SPI1_MOSI_PIN     P1_24
-
-// SSP2 LCD SD port
-#define BOARD_SPI2_NSS_PIN      P_NC
-#define BOARD_SPI2_SCK_PIN      P1_00
-#define BOARD_SPI2_MISO_PIN     P1_04
-#define BOARD_SPI2_MOSI_PIN     P1_01
-
-// SSP1 Onboard SD port
-#define BOARD_SPI3_NSS_PIN      P_NC
-#define BOARD_SPI3_SCK_PIN      P0_07
-#define BOARD_SPI3_MISO_PIN     P0_08
-#define BOARD_SPI3_MOSI_PIN     P0_09
-
-class SPISettings {
-public:
-  SPISettings(uint32_t spiRate, int inBitOrder, int inDataMode) {
-    init_AlwaysInline(spiRate2Clock(spiRate), inBitOrder, inDataMode, DATA_SIZE_8BIT);
-  }
-  SPISettings(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
-    if (__builtin_constant_p(inClock))
-      init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
-    else
-      init_MightInline(inClock, inBitOrder, inDataMode, inDataSize);
-  }
-  SPISettings() {
-    init_AlwaysInline(4000000, MSBFIRST, SPI_MODE0, DATA_SIZE_8BIT);
-  }
-
-  //uint32_t spiRate() const { return spi_speed; }
-
-  static uint32_t spiRate2Clock(uint32_t spiRate) {
-    uint32_t Marlin_speed[7]; // CPSR is always 2
-    Marlin_speed[0] = 8333333; //(SCR:  2)  desired: 8,000,000  actual: 8,333,333  +4.2%  SPI_FULL_SPEED
-    Marlin_speed[1] = 4166667; //(SCR:  5)  desired: 4,000,000  actual: 4,166,667  +4.2%  SPI_HALF_SPEED
-    Marlin_speed[2] = 2083333; //(SCR: 11)  desired: 2,000,000  actual: 2,083,333  +4.2%  SPI_QUARTER_SPEED
-    Marlin_speed[3] = 1000000; //(SCR: 24)  desired: 1,000,000  actual: 1,000,000         SPI_EIGHTH_SPEED
-    Marlin_speed[4] =  500000; //(SCR: 49)  desired:   500,000  actual:   500,000         SPI_SPEED_5
-    Marlin_speed[5] =  250000; //(SCR: 99)  desired:   250,000  actual:   250,000         SPI_SPEED_6
-    Marlin_speed[6] =  125000; //(SCR:199)  desired:   125,000  actual:   125,000         Default from HAL.h
-    return Marlin_speed[spiRate > 6 ? 6 : spiRate];
-  }
-
-private:
-  void init_MightInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) {
-    init_AlwaysInline(inClock, inBitOrder, inDataMode, inDataSize);
-  }
-  void init_AlwaysInline(uint32_t inClock, uint8_t inBitOrder, uint8_t inDataMode, uint32_t inDataSize) __attribute__((__always_inline__)) {
-    clock    = inClock;
-    bitOrder = inBitOrder;
-    dataMode = inDataMode;
-    dataSize = inDataSize;
-    m_config = {};
-    m_config.frequency = 400000;
-  }
-
-  MCUI::SSP::Config m_config;
-
-  //uint32_t spi_speed;
-  uint32_t clock;
-  uint32_t dataSize;
-  //uint32_t clockDivider;
-  uint8_t bitOrder;
-  uint8_t dataMode;
-
-  uint8_t device_id;
-
-  friend class SPIClass;
-};
-
-/**
- * @brief Wirish SPI interface.
- *
- * This is the same interface is available across HAL
- *
- * This implementation uses software slave management, so the caller
- * is responsible for controlling the slave select line.
- */
-class SPIClass {
-public:
-  /**
-   * @param spiPortNumber Number of the SPI port to manage.
-   */
-  SPIClass(uint8_t spiPortNumber);
-
-  /**
-   * Init using pins
-   */
-  SPIClass(pin_t mosi, pin_t miso, pin_t sclk, pin_t ssel = (pin_t)-1);
-
-  /**
-   * Select and configure the current selected SPI device to use
-   */
-  void begin();
-
-  /**
-   * Disable the current SPI device
-   */
-  void end();
-
-  void beginTransaction(const SPISettings&);
-  void endTransaction() {}
-
-  // Transfer using 1 "Data Size"
-  uint8_t transfer(uint16_t data);
-  // Transfer 2 bytes in 8 bit mode
-  uint16_t transfer16(uint16_t data);
-
-  void send(uint8_t data);
-
-  uint16_t read();
-  void read(uint8_t *buf, uint32_t len);
-
-  void dmaSend(void *buf, uint16_t length, bool minc);
-
-  /**
-   * @brief Sets the number of the SPI peripheral to be used by
-   *        this HardwareSPI instance.
-   *
-   * @param spi_num Number of the SPI port. 1-2 in low density devices
-   *     or 1-3 in high density devices.
-   */
-  void setModule(uint8_t device);
-
-  void setClock(uint32_t clock);
-  void setBitOrder(uint8_t bitOrder);
-  void setDataMode(uint8_t dataMode);
-  void setDataSize(uint32_t ds);
-
-  inline uint32_t getDataSize() { return _currentSetting->dataSize; }
-
-private:
-  SPISettings _settings[BOARD_NR_SPI];
-  SPISettings *_currentSetting;
-
-  void updateSettings();
-};
-
-extern SPIClass SPI;
@@ -1,111 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-#include "../../core/millis_t.h"
-#include "../../sd/cardreader.h"
-
-#include <mcu_interface.h>
-#include <driver/usb_device.h>
-
-TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
-
-void MarlinHAL::init() {
-
-  MCUI::pwm_init();
-
-  // Init LEDs
-  #if PIN_EXISTS(LED)
-    SET_DIR_OUTPUT(LED_PIN);
-    WRITE_PIN_CLR(LED_PIN);
-    #if PIN_EXISTS(LED2)
-      SET_DIR_OUTPUT(LED2_PIN);
-      WRITE_PIN_CLR(LED2_PIN);
-      #if PIN_EXISTS(LED3)
-        SET_DIR_OUTPUT(LED3_PIN);
-        WRITE_PIN_CLR(LED3_PIN);
-        #if PIN_EXISTS(LED4)
-          SET_DIR_OUTPUT(LED4_PIN);
-          WRITE_PIN_CLR(LED4_PIN);
-        #endif
-      #endif
-    #endif
-
-    // Flash status LED 3 times to indicate Marlin has started booting
-    for(int i = 0; i < 6; ++i) {
-      TOGGLE(LED_PIN);
-      delay(100);
-    }
-  #endif
-
-  // Init Servo Pins
-  #define INIT_SERVO(N) OUT_WRITE(SERVO##N##_PIN, LOW)
-  #if HAS_SERVO_0
-    INIT_SERVO(0);
-  #endif
-  #if HAS_SERVO_1
-    INIT_SERVO(1);
-  #endif
-  #if HAS_SERVO_2
-    INIT_SERVO(2);
-  #endif
-  #if HAS_SERVO_3
-    INIT_SERVO(3);
-  #endif
-
-  #if PIN_EXISTS(SD_SS)
-    OUT_WRITE(SD_SS_PIN, HIGH);
-  #endif
-
-  #if PIN_EXISTS(ONBOARD_SD_CS) && ONBOARD_SD_CS_PIN != SD_SS_PIN
-    OUT_WRITE(ONBOARD_SD_CS_PIN, HIGH);
-  #endif
-
-  TERN_(HAS_SD_HOST_DRIVE, MCUI::USBDevice::msc_storage_init()); // Enable USB SD card access
-  MCUI::USBDevice::connect(2000, LED_PIN);
-
-  HAL_timer_init();
-
-  TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
-}
-
-// HAL idle task
-void MarlinHAL::idletask() {
-  #if HAS_SHARED_MEDIA
-    // If Marlin is using the SD card we need to lock it to prevent access from
-    // a PC via USB.
-    // Other HALs use IS_SD_PRINTING() and IS_SD_FILE_OPEN() to check for access but
-    // this will not reliably detect delete operations. To be safe we will lock
-    // the disk if Marlin has it mounted. Unfortunately there is currently no way
-    // to unmount the disk from the LCD menu.
-    // if (IS_SD_PRINTING() || IS_SD_FILE_OPEN())
-    if (card.isMounted())
-      MCUI::USBDevice::msc_storage_lock();
-    else
-      MCUI::USBDevice::msc_storage_release();
-  #endif
-  // Perform USB stack housekeeping
-  MCUI::USBDevice::msc_run_deferred_commands();
-}
-
-#endif // TARGET_LPC4078
@@ -1,57 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Support routines for LPC1768
- */
-
-/**
- * Translation of routines & variables used by pinsDebug.h
- */
-
-#define NUMBER_PINS_TOTAL NUM_DIGITAL_PINS
-#define IS_ANALOG(P) (DIGITAL_PIN_TO_ANALOG_PIN(P) >= 0 ? 1 : 0)
-#define digitalRead_mod(p) extDigitalRead(p)
-#define PRINT_PORT(p)
-#define GET_ARRAY_PIN(p) pin_array[p].pin
-#define PRINT_ARRAY_NAME(x) do{ sprintf_P(buffer, PSTR("%-" STRINGIFY(MAX_NAME_LENGTH) "s"), pin_array[x].name); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN(p) do{ sprintf_P(buffer, PSTR("P%d_%02d"), MCUI::pin_port(p), MCUI::pin_bit(p)); SERIAL_ECHO(buffer); }while(0)
-#define PRINT_PIN_ANALOG(p) do{ sprintf_P(buffer, PSTR("_A%d     "), MCUI::pin_get_adc_channel(pin)); SERIAL_ECHO(buffer); }while(0)
-#define MULTI_NAME_PAD 17 // space needed to be pretty if not first name assigned to a pin
-
-// pins that will cause hang/reset/disconnect in M43 Toggle and Watch utilities
-#ifndef M43_NEVER_TOUCH
-  #define M43_NEVER_TOUCH(Q) ((Q) == P0_29 || (Q) == P0_30 || (Q) == P2_09)  // USB pins
-#endif
-
-bool GET_PINMODE(const pin_t pin) {
-  if (!MCUI::pin_is_valid(pin) || MCUI::pin_adc_enabled(pin)) // found an invalid pin or active analog pin
-    return false;
-
-  return MCUI::gpio_direction(pin);
-}
-
-#define GET_ARRAY_IS_DIGITAL(x) ((bool) pin_array[x].is_digital)
-
-void print_port(const pin_t) {}
-void pwm_details(const pin_t) {}
-bool pwm_status(const pin_t) { return false; }
@@ -1,54 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-#include "../../core/macros.h"
-
-#if ALL(SDSUPPORT, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_ENABLE == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
-  #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
-                            // needed due to the speed and mode required for communicating with each device being different.
-                            // This requirement can be removed if the SPI access to these devices is updated to use
-                            // spiBeginTransaction.
-#endif
-
-/** onboard SD card */
-//#define SD_SCK_PIN        P0_07
-//#define SD_MISO_PIN       P0_08
-//#define SD_MOSI_PIN       P0_09
-//#define SD_SS_PIN         P0_06
-/** external */
-#ifndef SD_SCK_PIN
-  #define SD_SCK_PIN        P0_15
-#endif
-#ifndef SD_MISO_PIN
-  #define SD_MISO_PIN       P0_17
-#endif
-#ifndef SD_MOSI_PIN
-  #define SD_MOSI_PIN       P0_18
-#endif
-#ifndef SD_SS_PIN
-  #define SD_SS_PIN         P1_23
-#endif
-#if !defined(SDSS) || SDSS == P_NC // gets defaulted in pins.h
-  #undef SDSS
-  #define SDSS          SD_SS_PIN
-#endif
@@ -1,65 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Description:
- *
- * Timers for LPC1768
- */
-
-#ifdef TARGET_LPC4078
-
-#include "../../inc/MarlinConfig.h"
-
-void HAL_timer_init() {
-  SBI(MCUI::system_control.PCONP, SBIT_TIMER0);  // Power ON Timer 0
-  STEP_TIMER_REF.PR = (HAL_TIMER_RATE) / (STEPPER_TIMER_RATE) - 1; // Use prescaler to set frequency if needed
-
-  SBI(MCUI::system_control.PCONP, SBIT_TIMER1);  // Power ON Timer 1
-  TEMP_TIMER_REF.PR = (HAL_TIMER_RATE) / 1000000 - 1;
-}
-
-void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency) {
-  switch (timer_num) {
-    case MF_TIMER_STEP:
-      STEP_TIMER_REF.MCR = _BV(SBIT_MR0I) | _BV(SBIT_MR0R); // Match on MR0, reset on MR0, interrupts when NVIC enables them
-      STEP_TIMER_REF.MR0 = uint32_t(STEPPER_TIMER_RATE) / frequency; // Match value (period) to set frequency
-      STEP_TIMER_REF.TCR = _BV(SBIT_CNTEN); // Counter Enable
-
-      MCUCore::nvic_set_priority(MCUI::IRQNumber::TIMER0, MCUCore::nvic_encode_priority(0, 1, 0));
-      MCUCore::nvic_enable_irq(MCUI::IRQNumber::TIMER0);
-      break;
-
-    case MF_TIMER_TEMP:
-      TEMP_TIMER_REF.MCR = _BV(SBIT_MR0I) | _BV(SBIT_MR0R); // Match on MR0, reset on MR0, interrupts when NVIC enables them
-      TEMP_TIMER_REF.MR0 = uint32_t(TEMP_TIMER_RATE) / frequency;
-      TEMP_TIMER_REF.TCR = _BV(SBIT_CNTEN); // Counter Enable
-
-      MCUCore::nvic_set_priority(MCUI::IRQNumber::TIMER1, MCUCore::nvic_encode_priority(0, 2, 0));
-      MCUCore::nvic_enable_irq(MCUI::IRQNumber::TIMER1);
-      break;
-
-    default: break;
-  }
-}
-
-#endif // TARGET_LPC4078
@@ -1,165 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * HAL For LPC1768
- */
-
-
-#include <stdint.h>
-#include <mcu_interface.h>
-
-#include "../../core/macros.h"
-
-#define SBIT_TIMER0 1
-#define SBIT_TIMER1 2
-
-#define SBIT_CNTEN 0
-
-#define SBIT_MR0I  0 // Timer 0 Interrupt when TC matches MR0
-#define SBIT_MR0R  1 // Timer 0 Reset TC on Match
-#define SBIT_MR0S  2 // Timer 0 Stop TC and PC on Match
-#define SBIT_MR1I  3
-#define SBIT_MR1R  4
-#define SBIT_MR1S  5
-#define SBIT_MR2I  6
-#define SBIT_MR2R  7
-#define SBIT_MR2S  8
-#define SBIT_MR3I  9
-#define SBIT_MR3R 10
-#define SBIT_MR3S 11
-
-// ------------------------
-// Defines
-// ------------------------
-
-#define _HAL_TIMER(T) _CAT(MCUI::timer, T)
-#define _HAL_TIMER_IRQ(T) TIMER##T##_IRQn
-#define __HAL_TIMER_ISR(T) extern "C" void TIMER##T##_IRQHandler()
-#define _HAL_TIMER_ISR(T)  __HAL_TIMER_ISR(T)
-
-typedef uint32_t hal_timer_t;
-#define HAL_TIMER_TYPE_MAX 0xFFFFFFFF
-
-#define HAL_TIMER_RATE         ((F_CPU) / 2)  // frequency of timers peripherals
-
-#ifndef MF_TIMER_STEP
-  #define MF_TIMER_STEP         0  // Timer Index for Stepper
-#endif
-#ifndef MF_TIMER_PULSE
-  #define MF_TIMER_PULSE        MF_TIMER_STEP
-#endif
-#ifndef MF_TIMER_TEMP
-  #define MF_TIMER_TEMP         1  // Timer Index for Temperature
-#endif
-#ifndef MF_TIMER_PWM
-  #define MF_TIMER_PWM          3  // Timer Index for PWM
-#endif
-
-#define TEMP_TIMER_RATE        1000000
-#define TEMP_TIMER_FREQUENCY   1000 // temperature interrupt frequency
-
-#define STEPPER_TIMER_RATE     HAL_TIMER_RATE   // frequency of stepper timer (HAL_TIMER_RATE / STEPPER_TIMER_PRESCALE)
-#define STEPPER_TIMER_TICKS_PER_US ((STEPPER_TIMER_RATE) / 1000000) // stepper timer ticks per µs
-#define STEPPER_TIMER_PRESCALE (CYCLES_PER_MICROSECOND / STEPPER_TIMER_TICKS_PER_US)
-
-#define PULSE_TIMER_RATE       STEPPER_TIMER_RATE   // frequency of pulse timer
-#define PULSE_TIMER_PRESCALE   STEPPER_TIMER_PRESCALE
-#define PULSE_TIMER_TICKS_PER_US STEPPER_TIMER_TICKS_PER_US
-
-#define ENABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_enable_interrupt(MF_TIMER_STEP)
-#define DISABLE_STEPPER_DRIVER_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_STEP)
-#define STEPPER_ISR_ENABLED() HAL_timer_interrupt_enabled(MF_TIMER_STEP)
-
-#define ENABLE_TEMPERATURE_INTERRUPT() HAL_timer_enable_interrupt(MF_TIMER_TEMP)
-#define DISABLE_TEMPERATURE_INTERRUPT() HAL_timer_disable_interrupt(MF_TIMER_TEMP)
-
-#ifndef HAL_STEP_TIMER_ISR
-  #define HAL_STEP_TIMER_ISR() _HAL_TIMER_ISR(MF_TIMER_STEP)
-#endif
-#ifndef HAL_TEMP_TIMER_ISR
-  #define HAL_TEMP_TIMER_ISR() _HAL_TIMER_ISR(MF_TIMER_TEMP)
-#endif
-
-// Timer references by index
-#define STEP_TIMER_REF _HAL_TIMER(MF_TIMER_STEP)
-#define TEMP_TIMER_REF _HAL_TIMER(MF_TIMER_TEMP)
-
-// ------------------------
-// Public functions
-// ------------------------
-void HAL_timer_init();
-void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
-
-FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: STEP_TIMER_REF.MR0 = compare; break; // Stepper Timer Match Register 0
-    case MF_TIMER_TEMP: TEMP_TIMER_REF.MR0 = compare; break; //    Temp Timer Match Register 0
-  }
-}
-
-FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: return STEP_TIMER_REF.MR0; // Stepper Timer Match Register 0
-    case MF_TIMER_TEMP: return TEMP_TIMER_REF.MR0; //    Temp Timer Match Register 0
-  }
-  return 0;
-}
-
-FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: return STEP_TIMER_REF.TC; // Stepper Timer Count
-    case MF_TIMER_TEMP: return TEMP_TIMER_REF.TC; //    Temp Timer Count
-  }
-  return 0;
-}
-
-FORCE_INLINE static void HAL_timer_enable_interrupt(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: MCUCore::nvic_enable_irq(MCUI::IRQNumber::TIMER0); break; // Enable interrupt handler
-    case MF_TIMER_TEMP: MCUCore::nvic_enable_irq(MCUI::IRQNumber::TIMER1); break; // Enable interrupt handler
-  }
-}
-
-FORCE_INLINE static void HAL_timer_disable_interrupt(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: MCUCore::nvic_disable_irq(MCUI::IRQNumber::TIMER0); break; // Disable interrupt handler
-    case MF_TIMER_TEMP: MCUCore::nvic_disable_irq(MCUI::IRQNumber::TIMER1); break; // Disable interrupt handler
-  }
-}
-
-FORCE_INLINE static bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: return MCUCore::nvic_irq_is_enabled(MCUI::IRQNumber::TIMER0); // Check if interrupt is enabled or not
-    case MF_TIMER_TEMP: return MCUCore::nvic_irq_is_enabled(MCUI::IRQNumber::TIMER1); // Check if interrupt is enabled or not
-  }
-  return false;
-}
-
-FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
-  switch (timer_num) {
-    case MF_TIMER_STEP: SBI(STEP_TIMER_REF.IR, SBIT_CNTEN); break;
-    case MF_TIMER_TEMP: SBI(TEMP_TIMER_REF.IR, SBIT_CNTEN); break;
-  }
-}
-
-#define HAL_timer_isr_epilogue(T) NOOP
@@ -1,89 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-// adapted from  I2C/master/master.c example
-//   https://www-users.cs.york.ac.uk/~pcc/MCP/HAPR-Course-web/CMSIS/examples/html/master_8c_source.html
-
-#ifdef TARGET_LPC1768
-
-#include "../include/i2c_util.h"
-#include "../../../core/millis_t.h"
-
-extern int millis();
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-//////////////////////////////////////////////////////////////////////////////////////
-
-#define I2CDEV_S_ADDR   0x78  // From SSD1306 (actual address is 0x3C - shift left 1 with LSB set to 0 to indicate write)
-
-// Send slave address and write bit
-uint8_t u8g_i2c_start(const uint8_t sla) {
-  // Sometimes TX data ACK or NAK status is returned.  That mean the start state didn't
-  // happen which means only the value of the slave address was send.  Keep looping until
-  // the slave address and write bit are actually sent.
-  do{
-    _I2C_Stop(I2CDEV_M); // output stop state on I2C bus
-    _I2C_Start(I2CDEV_M); // output start state on I2C bus
-    while ((I2C_status != I2C_I2STAT_M_TX_START)
-        && (I2C_status != I2C_I2STAT_M_TX_RESTART)
-        && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
-        && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK));  //wait for start to be asserted
-
-    LPC_I2C1->I2CONCLR = I2C_I2CONCLR_STAC; // clear start state before tansmitting slave address
-    LPC_I2C1->I2DAT = I2CDEV_S_ADDR & I2C_I2DAT_BITMASK; // transmit slave address & write bit
-    LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
-    LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
-    while ((I2C_status != I2C_I2STAT_M_TX_SLAW_ACK)
-        && (I2C_status != I2C_I2STAT_M_TX_SLAW_NACK)
-        && (I2C_status != I2C_I2STAT_M_TX_DAT_ACK)
-        && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK));  //wait for slaw to finish
-  }while ( (I2C_status == I2C_I2STAT_M_TX_DAT_ACK) ||  (I2C_status == I2C_I2STAT_M_TX_DAT_NACK));
-  return 1;
-}
-
-void u8g_i2c_init(const uint8_t clock_option) {
-  configure_i2c(clock_option);
-  u8g_i2c_start(0); // Send slave address and write bit
-}
-
-uint8_t u8g_i2c_send_byte(uint8_t data) {
-  #define I2C_TIMEOUT 3
-  LPC_I2C1->I2DAT = data & I2C_I2DAT_BITMASK; // transmit data
-  LPC_I2C1->I2CONSET = I2C_I2CONSET_AA;
-  LPC_I2C1->I2CONCLR = I2C_I2CONCLR_SIC;
-  const millis_t timeout = millis() + I2C_TIMEOUT;
-  while ((I2C_status != I2C_I2STAT_M_TX_DAT_ACK) && (I2C_status != I2C_I2STAT_M_TX_DAT_NACK) && PENDING(millis(), timeout));  // wait for xmit to finish
-  // had hangs with SH1106 so added time out - have seen temporary screen corruption when this happens
-  return 1;
-}
-
-void u8g_i2c_stop() {
-}
-
-#ifdef __cplusplus
-  }
-#endif
-
-#endif // TARGET_LPC1768
@@ -1,28 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-void u8g_i2c_init(const uint8_t clock_options);
-//uint8_t u8g_i2c_wait(uint8_t mask, uint8_t pos);
-uint8_t u8g_i2c_start(uint8_t sla);
-uint8_t u8g_i2c_send_byte(uint8_t data);
-void u8g_i2c_stop();
@@ -1,46 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * LPC1768 LCD-specific defines
- */
-
-#ifndef U8G_HAL_LINKS
-
-  #define U8G_COM_SSD_I2C_HAL u8g_com_arduino_ssd_i2c_fn  // See U8glib-HAL
-
-#else
-
-  uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-  uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr);
-
-  #define U8G_COM_HAL_SW_SPI_FN       u8g_com_HAL_LPC1768_sw_spi_fn
-  #define U8G_COM_HAL_HW_SPI_FN       u8g_com_HAL_LPC1768_hw_spi_fn
-  #define U8G_COM_ST7920_HAL_SW_SPI   u8g_com_HAL_LPC1768_ST7920_sw_spi_fn
-  #define U8G_COM_ST7920_HAL_HW_SPI   u8g_com_HAL_LPC1768_ST7920_hw_spi_fn
-  #define U8G_COM_SSD_I2C_HAL         u8g_com_HAL_LPC1768_ssd_hw_i2c_fn
-
-#endif
@@ -1,43 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * LCD delay routines - used by all the drivers.
- *
- * These are based on the LPC1768 routines.
- *
- * Couldn't just call exact copies because the overhead
- * results in a one microsecond delay taking about 4µS.
- */
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-void U8g_delay(int msec);
-void u8g_MicroDelay();
-void u8g_10MicroDelay();
-
-#ifdef __cplusplus
-  }
-#endif
@@ -1,59 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Low level pin manipulation routines - used by all the drivers.
- *
- * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
- *
- * Couldn't just call exact copies because the overhead killed the LCD update speed
- * With an intermediate level the softspi was running in the 10-20kHz range which
- * resulted in using about about 25% of the CPU's time.
- */
-
-#ifdef TARGET_LPC4078
-
-#include  <mcu_interface.h>
-
-extern "C" {
-
-#include "LCD_pin_routines.h"
-
-void u8g_SetPinOutput(uint8_t pin) {
-  MCUI::gpio_set_output(pin);
-}
-
-void u8g_SetPinInput(uint8_t pin) {
-  MCUI::gpio_set_input(pin);
-}
-
-void u8g_SetPinLevel(uint8_t  pin, uint8_t  pin_status) {
-  MCUI::gpio_set(pin, pin_status);
-}
-
-uint8_t u8g_GetPinLevel(uint8_t pin) {
-  return MCUI::gpio_get(pin);
-}
-
-}
-
-#endif // TARGET_LPC4078
@@ -1,37 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-/**
- * Low level pin manipulation routines - used by all the drivers.
- *
- * These are based on the LPC1768 pinMode, digitalRead & digitalWrite routines.
- *
- * Couldn't just call exact copies because the overhead killed the LCD update speed
- * With an intermediate level the softspi was running in the 10-20kHz range which
- * resulted in using about about 25% of the CPU's time.
- */
-
-void u8g_SetPinOutput(uint8_t internal_pin_number);
-void u8g_SetPinInput(uint8_t internal_pin_number);
-void u8g_SetPinLevel(uint8_t  pin, uint8_t  pin_status);
-uint8_t u8g_GetPinLevel(uint8_t pin);
@@ -1,129 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Based on u8g_com_msp430_hw_spi.c
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2011, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright notice, this list
- *    of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright notice, this
- *    list of conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifdef TARGET_LPC4078
-
-#include "../../../inc/MarlinConfigPre.h"
-
-#if HAS_MARLINUI_U8GLIB
-
-#include <U8glib-HAL.h>
-#include "../../shared/HAL_SPI.h"
-
-#ifndef LCD_SPI_SPEED
-  #ifdef SD_SPI_SPEED
-    #define LCD_SPI_SPEED SD_SPI_SPEED    // Assume SPI speed shared with SD
-  #else
-    #define LCD_SPI_SPEED SPI_FULL_SPEED  // Use full speed if SD speed is not supplied
-  #endif
-#endif
-
-uint8_t u8g_com_HAL_LPC1768_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_STOP:
-      break;
-
-    case U8G_COM_MSG_INIT:
-      u8g_SetPILevel(u8g, U8G_PI_CS, 1);
-      u8g_SetPILevel(u8g, U8G_PI_A0, 1);
-      u8g_SetPILevel(u8g, U8G_PI_RESET, 1);
-      u8g_SetPIOutput(u8g, U8G_PI_CS);
-      u8g_SetPIOutput(u8g, U8G_PI_A0);
-      u8g_SetPIOutput(u8g, U8G_PI_RESET);
-      u8g_Delay(5);
-      spiBegin();
-      spiInit(LCD_SPI_SPEED);
-      break;
-
-    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
-      u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-      u8g_SetPILevel(u8g, U8G_PI_CS, (arg_val ? 0 : 1));
-      break;
-
-    case U8G_COM_MSG_RESET:
-      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
-      break;
-
-    case U8G_COM_MSG_WRITE_BYTE:
-      spiSend((uint8_t)arg_val);
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          spiSend(*ptr++);
-          arg_val--;
-        }
-      }
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ_P: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          spiSend(*ptr++);
-          arg_val--;
-        }
-      }
-      break;
-  }
-  return 1;
-}
-
-#endif // HAS_MARLINUI_U8GLIB
-
-#endif // TARGET_LPC4078
@@ -1,198 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Based on u8g_com_arduino_ssd_i2c.c
- *
- * COM interface for Arduino (AND ATmega) and the SSDxxxx chip (SOLOMON) variant
- * I2C protocol
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2011, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright notice, this list
- *    of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright notice, this
- *    list of conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-/**
- * Special pin usage:
- * U8G_PI_I2C_OPTION additional options
- * U8G_PI_A0_STATE used to store the last value of the command/data register selection
- * U8G_PI_SET_A0   1: Signal request to update I2C device with new A0_STATE, 0: Do nothing, A0_STATE matches I2C device
- * U8G_PI_SCL    clock line (NOT USED)
- * U8G_PI_SDA    data line (NOT USED)
- *
- * U8G_PI_RESET    reset line (currently disabled, see below)
- *
- * Protocol:
- * SLA, Cmd/Data Selection, Arguments
- * The command/data register is selected by a special instruction byte, which is sent after SLA
- *
- * The continue bit is always 0 so that a (re)start is equired for the change from cmd to/data mode
- */
-
-#ifdef TARGET_LPC1768
-
-#include "../../../inc/MarlinConfigPre.h"
-
-#if HAS_MARLINUI_U8GLIB
-
-#include <U8glib-HAL.h>
-
-#define I2C_SLA         (0x3C*2)
-//#define I2C_CMD_MODE  0x080
-#define I2C_CMD_MODE    0x000
-#define I2C_DATA_MODE   0x040
-
-uint8_t u8g_com_ssd_I2C_start_sequence(u8g_t *u8g) {
-  /* are we requested to set the a0 state? */
-  if (u8g->pin_list[U8G_PI_SET_A0] == 0) return 1;
-
-  /* setup bus, might be a repeated start */
-  if (u8g_i2c_start(I2C_SLA) == 0) return 0;
-  if (u8g->pin_list[U8G_PI_A0_STATE] == 0) {
-    if (u8g_i2c_send_byte(I2C_CMD_MODE) == 0) return 0;
-  }
-  else if (u8g_i2c_send_byte(I2C_DATA_MODE) == 0)
-    return 0;
-
-  u8g->pin_list[U8G_PI_SET_A0] = 0;
-  return 1;
-}
-
-uint8_t u8g_com_HAL_LPC1768_ssd_hw_i2c_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_INIT:
-      //u8g_com_arduino_digital_write(u8g, U8G_PI_SCL, HIGH);
-      //u8g_com_arduino_digital_write(u8g, U8G_PI_SDA, HIGH);
-      //u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* initial RS state: unknown mode */
-
-      u8g_i2c_init(u8g->pin_list[U8G_PI_I2C_OPTION]);
-      u8g_com_ssd_I2C_start_sequence(u8g);
-      break;
-
-    case U8G_COM_MSG_STOP:
-      break;
-
-    case U8G_COM_MSG_RESET:
-      /* Currently disabled, but it could be enable. Previous restrictions have been removed */
-      /* u8g_com_arduino_digital_write(u8g, U8G_PI_RESET, arg_val); */
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-      u8g->pin_list[U8G_PI_A0_STATE] = 0;
-      u8g->pin_list[U8G_PI_SET_A0] = 1;   /* force a0 to set again, also forces start condition */
-      if (arg_val == 0 ) {
-        /* disable chip, send stop condition */
-        u8g_i2c_stop();
-      }
-      else {
-        /* enable, do nothing: any byte writing will trigger the i2c start */
-      }
-      break;
-
-    case U8G_COM_MSG_WRITE_BYTE:
-      //u8g->pin_list[U8G_PI_SET_A0] = 1;
-      if (u8g_com_ssd_I2C_start_sequence(u8g) == 0) {
-        u8g_i2c_stop();
-        return 0;
-      }
-
-      if (u8g_i2c_send_byte(arg_val) == 0) {
-        u8g_i2c_stop();
-        return 0;
-      }
-      // u8g_i2c_stop();
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ: {
-        //u8g->pin_list[U8G_PI_SET_A0] = 1;
-        if (u8g_com_ssd_I2C_start_sequence(u8g) == 0) {
-         u8g_i2c_stop();
-         return 0;
-        }
-
-        uint8_t *ptr = (uint8_t *)arg_ptr;
-        while (arg_val > 0) {
-          if (u8g_i2c_send_byte(*ptr++) == 0) {
-            u8g_i2c_stop();
-            return 0;
-          }
-          arg_val--;
-        }
-      }
-      // u8g_i2c_stop();
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ_P: {
-        //u8g->pin_list[U8G_PI_SET_A0] = 1;
-        if (u8g_com_ssd_I2C_start_sequence(u8g) == 0) {
-          u8g_i2c_stop();
-          return 0;
-        }
-
-        uint8_t *ptr = (uint8_t *)arg_ptr;
-        while (arg_val > 0) {
-          if (u8g_i2c_send_byte(u8g_pgm_read(ptr)) == 0)
-            return 0;
-          ptr++;
-          arg_val--;
-        }
-      }
-      // u8g_i2c_stop();
-      break;
-
-    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
-      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
-      u8g->pin_list[U8G_PI_SET_A0] = 1;   /* force a0 to set again */
-      break;
-
-  } // switch
-  return 1;
-}
-
-#endif // HAS_MARLINUI_U8GLIB
-
-#endif // TARGET_LPC1768
@@ -1,138 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Based on u8g_com_LPC1768_st7920_hw_spi.c
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2011, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright notice, this list
- *    of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright notice, this
- *    list of conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifdef TARGET_LPC4078
-
-#include "../../../inc/MarlinConfigPre.h"
-
-#if HAS_MARLINUI_U8GLIB
-
-#include <U8glib-HAL.h>
-#include "../../shared/HAL_SPI.h"
-#include "../../shared/Delay.h"
-
-void spiBegin();
-void spiInit(uint8_t spiRate);
-void spiSend(uint8_t b);
-void spiSend(const uint8_t *buf, size_t n);
-
-static uint8_t rs_last_state = 255;
-
-static void u8g_com_LPC1768_st7920_write_byte_hw_spi(uint8_t rs, uint8_t val) {
-
-  if (rs != rs_last_state) {      // Time to send a command/data byte
-    rs_last_state = rs;
-    spiSend(rs ? 0x0FA : 0x0F8);  // Send data or command
-    DELAY_US(40);                 // Give the controller some time: 20 is bad, 30 is OK, 40 is safe
-  }
-
-  spiSend(val & 0xF0);
-  spiSend(val << 4);
-}
-
-uint8_t u8g_com_HAL_LPC1768_ST7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_INIT:
-      u8g_SetPILevel(u8g, U8G_PI_CS, 0);
-      u8g_SetPIOutput(u8g, U8G_PI_CS);
-      u8g_Delay(5);
-      spiBegin();
-      spiInit(SPI_EIGHTH_SPEED);            // ST7920 max speed is about 1.1 MHz
-      u8g->pin_list[U8G_PI_A0_STATE] = 0;   // initial RS state: command mode
-      break;
-
-    case U8G_COM_MSG_STOP:
-      break;
-
-    case U8G_COM_MSG_RESET:
-      u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
-      break;
-
-    case U8G_COM_MSG_ADDRESS:                   // Define cmd (arg_val = 0) or data mode (arg_val = 1)
-      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-      u8g_SetPILevel(u8g, U8G_PI_CS, arg_val);  // Note: the ST7920 has an active high chip-select
-      break;
-
-    case U8G_COM_MSG_WRITE_BYTE:
-      u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
-          arg_val--;
-        }
-      }
-      break;
-
-      case U8G_COM_MSG_WRITE_SEQ_P: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          u8g_com_LPC1768_st7920_write_byte_hw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
-          arg_val--;
-        }
-      }
-      break;
-  }
-  return 1;
-}
-
-#endif // HAS_MARLINUI_U8GLIB
-
-#endif // TARGET_LPC4078
@@ -1,147 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Based on u8g_com_st7920_hw_spi.c
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2011, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright notice, this list
- *    of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright notice, this
- *    list of conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifdef TARGET_LPC4078
-
-#include "../../../inc/MarlinConfigPre.h"
-
-#if IS_U8GLIB_ST7920
-
-#include <U8glib-HAL.h>
-#include "../SoftwareSPI.h"
-#include "../../shared/Delay.h"
-#include "../../shared/HAL_SPI.h"
-
-#ifndef LCD_SPI_SPEED
-  #define LCD_SPI_SPEED SPI_EIGHTH_SPEED  // About 1 MHz
-#endif
-
-static pin_t SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL;
-static uint8_t SPI_speed = 0;
-
-static void u8g_com_LPC1768_st7920_write_byte_sw_spi(uint8_t rs, uint8_t val) {
-  static uint8_t rs_last_state = 255;
-  if (rs != rs_last_state) {
-    // Transfer Data (FA) or Command (F8)
-    swSpiTransfer(rs ? 0x0FA : 0x0F8, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
-    rs_last_state = rs;
-    DELAY_US(40); // Give the controller time to process the data: 20 is bad, 30 is OK, 40 is safe
-  }
-  swSpiTransfer(val & 0x0F0, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
-  swSpiTransfer(val << 4, SPI_speed, SCK_pin_ST7920_HAL, -1, MOSI_pin_ST7920_HAL_HAL);
-}
-
-uint8_t u8g_com_HAL_LPC1768_ST7920_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_INIT:
-      SCK_pin_ST7920_HAL = u8g->pin_list[U8G_PI_SCK];
-      MOSI_pin_ST7920_HAL_HAL = u8g->pin_list[U8G_PI_MOSI];
-
-      u8g_SetPIOutput(u8g, U8G_PI_CS);
-      u8g_SetPIOutput(u8g, U8G_PI_SCK);
-      u8g_SetPIOutput(u8g, U8G_PI_MOSI);
-      u8g_Delay(5);
-
-      SPI_speed = swSpiInit(LCD_SPI_SPEED, SCK_pin_ST7920_HAL, MOSI_pin_ST7920_HAL_HAL);
-
-      u8g_SetPILevel(u8g, U8G_PI_CS, 0);
-      u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
-      u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
-
-      u8g->pin_list[U8G_PI_A0_STATE] = 0;       /* initial RS state: command mode */
-      break;
-
-    case U8G_COM_MSG_STOP:
-      break;
-
-    case U8G_COM_MSG_RESET:
-       if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
-      break;
-
-    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
-      u8g->pin_list[U8G_PI_A0_STATE] = arg_val;
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-      if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_CS]) u8g_SetPILevel(u8g, U8G_PI_CS, arg_val);  //note: the st7920 has an active high chip select
-      break;
-
-    case U8G_COM_MSG_WRITE_BYTE:
-      u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], arg_val);
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
-          arg_val--;
-        }
-      }
-      break;
-
-      case U8G_COM_MSG_WRITE_SEQ_P: {
-        uint8_t *ptr = (uint8_t*) arg_ptr;
-        while (arg_val > 0) {
-          u8g_com_LPC1768_st7920_write_byte_sw_spi(u8g->pin_list[U8G_PI_A0_STATE], *ptr++);
-          arg_val--;
-        }
-      }
-      break;
-  }
-  return 1;
-}
-
-#endif // IS_U8GLIB_ST7920
-#endif // TARGET_LPC4078
@@ -1,209 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <https://www.gnu.org/licenses/>.
- *
- */
-
-/**
- * Based on u8g_com_std_sw_spi.c
- *
- * Universal 8bit Graphics Library
- *
- * Copyright (c) 2015, olikraus@gmail.com
- * All rights reserved.
- *
- * Redistribution and use in source and binary forms, with or without modification,
- * are permitted provided that the following conditions are met:
- *
- *  * Redistributions of source code must retain the above copyright notice, this list
- *    of conditions and the following disclaimer.
- *
- *  * Redistributions in binary form must reproduce the above copyright notice, this
- *    list of conditions and the following disclaimer in the documentation and/or other
- *    materials provided with the distribution.
- *
- * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND
- * CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES,
- * INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF
- * MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE
- * DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT HOLDER OR
- * CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL,
- * SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT
- * NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR SERVICES;
- * LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER
- * CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT,
- * STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
- * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF
- * ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
- */
-
-#ifdef TARGET_LPC4078
-
-#include "../../../inc/MarlinConfigPre.h"
-
-#if HAS_MARLINUI_U8GLIB && !IS_U8GLIB_ST7920
-
-#include <SoftwareSPI.h>
-#include "../../shared/HAL_SPI.h"
-
-#ifndef LCD_SPI_SPEED
-  #define LCD_SPI_SPEED SPI_QUARTER_SPEED  // About 2 MHz
-#endif
-
-#include <Arduino.h>
-#include <algorithm>
-#include <LPC17xx.h>
-#include <gpio.h>
-
-#include <U8glib-HAL.h>
-
-uint8_t swSpiTransfer_mode_0(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
-
-  LOOP_L_N(i, 8) {
-    if (spi_speed == 0) {
-      LPC176x::gpio_set(mosi_pin, !!(b & 0x80));
-      LPC176x::gpio_set(sck_pin, HIGH);
-      b <<= 1;
-      if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
-      LPC176x::gpio_set(sck_pin, LOW);
-    }
-    else {
-      const uint8_t state = (b & 0x80) ? HIGH : LOW;
-      LOOP_L_N(j, spi_speed)
-        LPC176x::gpio_set(mosi_pin, state);
-
-      LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1))
-        LPC176x::gpio_set(sck_pin, HIGH);
-
-      b <<= 1;
-      if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
-
-      LOOP_L_N(j, spi_speed)
-        LPC176x::gpio_set(sck_pin, LOW);
-    }
-  }
-
-  return b;
-}
-
-uint8_t swSpiTransfer_mode_3(uint8_t b, const uint8_t spi_speed, const pin_t sck_pin, const pin_t miso_pin, const pin_t mosi_pin ) {
-
-  LOOP_L_N(i, 8) {
-    const uint8_t state = (b & 0x80) ? HIGH : LOW;
-    if (spi_speed == 0) {
-      LPC176x::gpio_set(sck_pin, LOW);
-      LPC176x::gpio_set(mosi_pin, state);
-      LPC176x::gpio_set(mosi_pin, state);  // need some setup time
-      LPC176x::gpio_set(sck_pin, HIGH);
-    }
-    else {
-      LOOP_L_N(j, spi_speed + (miso_pin >= 0 ? 0 : 1))
-        LPC176x::gpio_set(sck_pin, LOW);
-
-      LOOP_L_N(j, spi_speed)
-        LPC176x::gpio_set(mosi_pin, state);
-
-      LOOP_L_N(j, spi_speed)
-        LPC176x::gpio_set(sck_pin, HIGH);
-    }
-    b <<= 1;
-    if (miso_pin >= 0 && LPC176x::gpio_get(miso_pin)) b |= 1;
-  }
-
-  return b;
-}
-
-static uint8_t SPI_speed = 0;
-
-static void u8g_sw_spi_HAL_LPC1768_shift_out(uint8_t dataPin, uint8_t clockPin, uint8_t val) {
-  #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)
-    swSpiTransfer_mode_3(val, SPI_speed, clockPin, -1, dataPin);
-  #else
-    swSpiTransfer_mode_0(val, SPI_speed, clockPin, -1, dataPin);
-  #endif
-}
-
-uint8_t u8g_com_HAL_LPC1768_sw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {
-  switch (msg) {
-    case U8G_COM_MSG_INIT:
-      u8g_SetPIOutput(u8g, U8G_PI_SCK);
-      u8g_SetPIOutput(u8g, U8G_PI_MOSI);
-      u8g_SetPIOutput(u8g, U8G_PI_CS);
-      u8g_SetPIOutput(u8g, U8G_PI_A0);
-      if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPIOutput(u8g, U8G_PI_RESET);
-      SPI_speed = swSpiInit(LCD_SPI_SPEED, u8g->pin_list[U8G_PI_SCK], u8g->pin_list[U8G_PI_MOSI]);
-      u8g_SetPILevel(u8g, U8G_PI_SCK, 0);
-      u8g_SetPILevel(u8g, U8G_PI_MOSI, 0);
-      break;
-
-    case U8G_COM_MSG_STOP:
-      break;
-
-    case U8G_COM_MSG_RESET:
-      if (U8G_PIN_NONE != u8g->pin_list[U8G_PI_RESET]) u8g_SetPILevel(u8g, U8G_PI_RESET, arg_val);
-      break;
-
-    case U8G_COM_MSG_CHIP_SELECT:
-      #if ANY(FYSETC_MINI_12864, MKS_MINI_12864)  // LCD SPI is running mode 3 while SD card is running mode 0
-        if (arg_val) {                               //   SCK idle state needs to be set to the proper idle state before
-                                                     //   the next chip select goes active
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 1);        // Set SCK to mode 3 idle state before CS goes active
-          u8g_SetPILevel(u8g, U8G_PI_CS, LOW);
-        }
-        else {
-          u8g_SetPILevel(u8g, U8G_PI_CS, HIGH);
-          u8g_SetPILevel(u8g, U8G_PI_SCK, 0);  // Set SCK to mode 0 idle state after CS goes inactive
-        }
-      #else
-        u8g_SetPILevel(u8g, U8G_PI_CS, !arg_val);
-      #endif
-      break;
-
-    case U8G_COM_MSG_WRITE_BYTE:
-      u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], arg_val);
-      break;
-
-    case U8G_COM_MSG_WRITE_SEQ: {
-        uint8_t *ptr = (uint8_t *)arg_ptr;
-        while (arg_val > 0) {
-          u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], *ptr++);
-          arg_val--;
-        }
-      }
-      break;
-
-      case U8G_COM_MSG_WRITE_SEQ_P: {
-        uint8_t *ptr = (uint8_t *)arg_ptr;
-        while (arg_val > 0) {
-          u8g_sw_spi_HAL_LPC1768_shift_out(u8g->pin_list[U8G_PI_MOSI], u8g->pin_list[U8G_PI_SCK], u8g_pgm_read(ptr));
-          ptr++;
-          arg_val--;
-        }
-      }
-      break;
-
-    case U8G_COM_MSG_ADDRESS:                     /* define cmd (arg_val = 0) or data mode (arg_val = 1) */
-      u8g_SetPILevel(u8g, U8G_PI_A0, arg_val);
-      break;
-  }
-  return 1;
-}
-
-#endif // HAS_MARLINUI_U8GLIB && !IS_U8GLIB_ST7920
-#endif // TARGET_LPC4078
@@ -126,7 +126,7 @@
  void serialEvent2() __attribute__((weak));
 #endif
 #ifdef USING_HW_SERIAL3
-  HAL_HardwareSerial HSerial3(USART3);
+  HAL_HardwareSerial Serial3(USART3);
  void serialEvent3() __attribute__((weak));
 #endif
 #ifdef USING_HW_SERIAL4
@@ -147,11 +147,11 @@
 #endif
 #ifdef USING_HW_SERIAL6
  #ifdef USART6
-    HAL_HardwareSerial HSerial6(USART6);
+    HAL_HardwareSerial HSerial5(USART6);
  #else
-    HAL_HardwareSerial HSerial6(UART6);
+    HAL_HardwareSerial HSerial5(UART6);
  #endif
-  void serialEvent6() __attribute__((weak));
+  void serialEvent5() __attribute__((weak));
 #endif

 // Constructors ////////////////////////////////////////////////////////////////
@@ -53,7 +53,6 @@
    inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }

    void _rx_complete_irq(serial_t *obj);
-    FORCE_INLINE static uint8_t buffer_overruns() { return 0; } // Not implemented. Void to avoid platform-dependent code.

    protected:
      usart_rx_callback_t _rx_callback;
@@ -58,9 +58,8 @@
 * Check for common serial pin conflicts
 */
 #define _CHECK_SERIAL_PIN(N) (( \
-    BTN_EN1 == N || BTN_EN2 == N ||DOGLCD_CS == N || HEATER_BED_PIN == N || FAN0_PIN == N || \
-    SDIO_D2_PIN == N || SDIO_D3_PIN == N || SDIO_CK_PIN == N || SDIO_CMD_PIN == N || \
-    Y_STEP_PIN == N || Y_ENABLE_PIN == N || E0_ENABLE_PIN == N || POWER_LOSS_PIN == N \
+    BTN_EN1 == N || DOGLCD_CS == N || HEATER_BED_PIN == N || FAN0_PIN == N || \
+    SDIO_D2_PIN == N || SDIO_D3_PIN == N || SDIO_CK_PIN == N || SDIO_CMD_PIN == N \
  ))
 #define CHECK_SERIAL_PIN(T,N) defined(UART##N##_##T##_PIN) && _CHECK_SERIAL_PIN(UART##N##_##T##_PIN)
 #if SERIAL_IN_USE(1)
@@ -37,61 +37,50 @@ LCD_CONTROLLER_TypeDef *TFT_FSMC::LCD;

 void TFT_FSMC::init() {
  uint32_t controllerAddress;
-  FMC_OR_FSMC(NORSRAM_TimingTypeDef) timing, extTiming;
+  FSMC_NORSRAM_TimingTypeDef timing, extTiming;

  uint32_t nsBank = (uint32_t)pinmap_peripheral(digitalPinToPinName(TFT_CS_PIN), pinMap_FSMC_CS);

  // Perform the SRAM1 memory initialization sequence
-  SRAMx.Instance = FMC_OR_FSMC(NORSRAM_DEVICE);
-  SRAMx.Extended = FMC_OR_FSMC(NORSRAM_EXTENDED_DEVICE);
-
+  SRAMx.Instance = FSMC_NORSRAM_DEVICE;
+  SRAMx.Extended = FSMC_NORSRAM_EXTENDED_DEVICE;
  // SRAMx.Init
  SRAMx.Init.NSBank = nsBank;
-  SRAMx.Init.DataAddressMux     = FMC_OR_FSMC(DATA_ADDRESS_MUX_DISABLE);
-  SRAMx.Init.MemoryType         = FMC_OR_FSMC(MEMORY_TYPE_SRAM);
-  #ifdef STM32F446xx
-    SRAMx.Init.MemoryDataWidth  = TERN(TFT_INTERFACE_FMC_8BIT, FMC_NORSRAM_MEM_BUS_WIDTH_8, FMC_NORSRAM_MEM_BUS_WIDTH_16);
-  #else
-    SRAMx.Init.MemoryDataWidth  = TERN(TFT_INTERFACE_FSMC_8BIT, FSMC_NORSRAM_MEM_BUS_WIDTH_8, FSMC_NORSRAM_MEM_BUS_WIDTH_16);
+  SRAMx.Init.DataAddressMux = FSMC_DATA_ADDRESS_MUX_DISABLE;
+  SRAMx.Init.MemoryType = FSMC_MEMORY_TYPE_SRAM;
+  SRAMx.Init.MemoryDataWidth = TERN(TFT_INTERFACE_FSMC_8BIT, FSMC_NORSRAM_MEM_BUS_WIDTH_8, FSMC_NORSRAM_MEM_BUS_WIDTH_16);
+  SRAMx.Init.BurstAccessMode = FSMC_BURST_ACCESS_MODE_DISABLE;
+  SRAMx.Init.WaitSignalPolarity = FSMC_WAIT_SIGNAL_POLARITY_LOW;
+  SRAMx.Init.WrapMode = FSMC_WRAP_MODE_DISABLE;
+  SRAMx.Init.WaitSignalActive = FSMC_WAIT_TIMING_BEFORE_WS;
+  SRAMx.Init.WriteOperation = FSMC_WRITE_OPERATION_ENABLE;
+  SRAMx.Init.WaitSignal = FSMC_WAIT_SIGNAL_DISABLE;
+  SRAMx.Init.ExtendedMode = FSMC_EXTENDED_MODE_ENABLE;
+  SRAMx.Init.AsynchronousWait = FSMC_ASYNCHRONOUS_WAIT_DISABLE;
+  SRAMx.Init.WriteBurst = FSMC_WRITE_BURST_DISABLE;
+  #ifdef STM32F4xx
+    SRAMx.Init.PageSize = FSMC_PAGE_SIZE_NONE;
  #endif
-  SRAMx.Init.BurstAccessMode    = FMC_OR_FSMC(BURST_ACCESS_MODE_DISABLE);
-  SRAMx.Init.WaitSignalPolarity = FMC_OR_FSMC(WAIT_SIGNAL_POLARITY_LOW);
-  SRAMx.Init.WrapMode           = FMC_OR_FSMC(WRAP_MODE_DISABLE);
-  SRAMx.Init.WaitSignalActive   = FMC_OR_FSMC(WAIT_TIMING_BEFORE_WS);
-  SRAMx.Init.WriteOperation     = FMC_OR_FSMC(WRITE_OPERATION_ENABLE);
-  SRAMx.Init.WaitSignal         = FMC_OR_FSMC(WAIT_SIGNAL_DISABLE);
-  SRAMx.Init.ExtendedMode       = FMC_OR_FSMC(EXTENDED_MODE_ENABLE);
-  SRAMx.Init.AsynchronousWait   = FMC_OR_FSMC(ASYNCHRONOUS_WAIT_DISABLE);
-  SRAMx.Init.WriteBurst         = FMC_OR_FSMC(WRITE_BURST_DISABLE);
-  #if defined(STM32F446xx) || defined(STM32F4xx)
-    SRAMx.Init.PageSize         = FMC_OR_FSMC(PAGE_SIZE_NONE);
-  #endif
-
  // Read Timing - relatively slow to ensure ID information is correctly read from TFT controller
-  // Can be decreased from 15-15-24 to 4-4-8 with risk of stability loss
-  timing.AddressSetupTime         = 15;
-  timing.AddressHoldTime          = 15;
-  timing.DataSetupTime            = 24;
-  timing.BusTurnAroundDuration    =  0;
-  timing.CLKDivision              = 16;
-  timing.DataLatency              = 17;
-  timing.AccessMode               = FMC_OR_FSMC(ACCESS_MODE_A);
-
+  // Can be decreases from 15-15-24 to 4-4-8 with risk of stability loss
+  timing.AddressSetupTime = 15;
+  timing.AddressHoldTime = 15;
+  timing.DataSetupTime = 24;
+  timing.BusTurnAroundDuration = 0;
+  timing.CLKDivision = 16;
+  timing.DataLatency = 17;
+  timing.AccessMode = FSMC_ACCESS_MODE_A;
  // Write Timing
  // Can be decreased from 8-15-8 to 0-0-1 with risk of stability loss
-  extTiming.AddressSetupTime      =  8;
-  extTiming.AddressHoldTime       = 15;
-  extTiming.DataSetupTime         =  8;
-  extTiming.BusTurnAroundDuration =  0;
-  extTiming.CLKDivision           = 16;
-  extTiming.DataLatency           = 17;
-  extTiming.AccessMode            = FMC_OR_FSMC(ACCESS_MODE_A);
+  extTiming.AddressSetupTime = 8;
+  extTiming.AddressHoldTime = 15;
+  extTiming.DataSetupTime = 8;
+  extTiming.BusTurnAroundDuration = 0;
+  extTiming.CLKDivision = 16;
+  extTiming.DataLatency = 17;
+  extTiming.AccessMode = FSMC_ACCESS_MODE_A;

-  #ifdef STM32F446xx
-    __HAL_RCC_FMC_CLK_ENABLE();
-  #else
-    __HAL_RCC_FSMC_CLK_ENABLE();
-  #endif
+  __HAL_RCC_FSMC_CLK_ENABLE();

  for (uint16_t i = 0; pinMap_FSMC[i].pin != NC; i++)
    pinmap_pinout(pinMap_FSMC[i].pin, pinMap_FSMC);
@@ -101,9 +90,9 @@ void TFT_FSMC::init() {
  controllerAddress = FSMC_BANK1_1;
  #ifdef PF0
    switch (nsBank) {
-      case FMC_OR_FSMC(NORSRAM_BANK2): controllerAddress = FSMC_BANK1_2; break;
-      case FMC_OR_FSMC(NORSRAM_BANK3): controllerAddress = FSMC_BANK1_3; break;
-      case FMC_OR_FSMC(NORSRAM_BANK4): controllerAddress = FSMC_BANK1_4; break;
+      case FSMC_NORSRAM_BANK2: controllerAddress = FSMC_BANK1_2 ; break;
+      case FSMC_NORSRAM_BANK3: controllerAddress = FSMC_BANK1_3 ; break;
+      case FSMC_NORSRAM_BANK4: controllerAddress = FSMC_BANK1_4 ; break;
    }
  #endif

@@ -111,44 +100,49 @@ void TFT_FSMC::init() {

  HAL_SRAM_Init(&SRAMx, &timing, &extTiming);

-  __HAL_RCC_DMA2_CLK_ENABLE();
-
  #ifdef STM32F1xx
-    DMAtx.Instance                = DMA2_Channel1;
+    __HAL_RCC_DMA1_CLK_ENABLE();
+    DMAtx.Instance = DMA1_Channel1;
  #elif defined(STM32F4xx)
-    DMAtx.Instance                = DMA2_Stream0;
-    DMAtx.Init.Channel            = DMA_CHANNEL_0;
-    DMAtx.Init.FIFOMode           = DMA_FIFOMODE_ENABLE;
-    DMAtx.Init.FIFOThreshold      = DMA_FIFO_THRESHOLD_FULL;
-    DMAtx.Init.MemBurst           = DMA_MBURST_SINGLE;
-    DMAtx.Init.PeriphBurst        = DMA_PBURST_SINGLE;
+    __HAL_RCC_DMA2_CLK_ENABLE();
+    DMAtx.Instance = DMA2_Stream0;
+    DMAtx.Init.Channel = DMA_CHANNEL_0;
+    DMAtx.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
+    DMAtx.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
+    DMAtx.Init.MemBurst = DMA_MBURST_SINGLE;
+    DMAtx.Init.PeriphBurst = DMA_PBURST_SINGLE;
  #endif

-  DMAtx.Init.Direction            = DMA_MEMORY_TO_MEMORY;
-  DMAtx.Init.MemInc               = DMA_MINC_DISABLE;
-  DMAtx.Init.PeriphDataAlignment  = DMA_PDATAALIGN_HALFWORD;
-  DMAtx.Init.MemDataAlignment     = DMA_MDATAALIGN_HALFWORD;
-  DMAtx.Init.Mode                 = DMA_NORMAL;
-  DMAtx.Init.Priority             = DMA_PRIORITY_HIGH;
+  DMAtx.Init.Direction = DMA_MEMORY_TO_MEMORY;
+  DMAtx.Init.MemInc = DMA_MINC_DISABLE;
+  DMAtx.Init.PeriphDataAlignment = DMA_PDATAALIGN_HALFWORD;
+  DMAtx.Init.MemDataAlignment = DMA_MDATAALIGN_HALFWORD;
+  DMAtx.Init.Mode = DMA_NORMAL;
+  DMAtx.Init.Priority = DMA_PRIORITY_HIGH;

  LCD = (LCD_CONTROLLER_TypeDef *)controllerAddress;
 }

 uint32_t TFT_FSMC::getID() {
+  uint32_t id;
  writeReg(0);
-  uint32_t id = LCD->RAM;
-  if (id == 0) id = readID(LCD_READ_ID);
-  if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF) id = readID(LCD_READ_ID4);
+  id = LCD->RAM;
+
+  if (id == 0)
+    id = readID(LCD_READ_ID);
+  if ((id & 0xFFFF) == 0 || (id & 0xFFFF) == 0xFFFF)
+    id = readID(LCD_READ_ID4);
  return id;
 }

-uint32_t TFT_FSMC::readID(tft_data_t inReg) {
+uint32_t TFT_FSMC::readID(const tft_data_t inReg) {
+  uint32_t id;
  writeReg(inReg);
-  uint32_t id = LCD->RAM; // dummy read
+  id = LCD->RAM; // dummy read
  id = inReg << 24;
  id |= (LCD->RAM & 0x00FF) << 16;
  id |= (LCD->RAM & 0x00FF) << 8;
-  id |= (LCD->RAM & 0x00FF);
+  id |= LCD->RAM & 0x00FF;
  return id;
 }

@@ -161,9 +155,7 @@ bool TFT_FSMC::isBusy() {
    #define __IS_DMA_CONFIGURED(__HANDLE__)   ((__HANDLE__)->Instance->PAR != 0)
  #endif

-  #ifdef __IS_DMA_CONFIGURED
-    if (!__IS_DMA_CONFIGURED(&DMAtx)) return false;
-  #endif
+  if (!__IS_DMA_CONFIGURED(&DMAtx)) return false;

  // Check if DMA transfer error or transfer complete flags are set
  if ((__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TE_FLAG_INDEX(&DMAtx)) == 0) && (__HAL_DMA_GET_FLAG(&DMAtx, __HAL_DMA_GET_TC_FLAG_INDEX(&DMAtx)) == 0)) return true;
@@ -182,6 +174,8 @@ void TFT_FSMC::transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t cou
  DMAtx.Init.PeriphInc = memoryIncrease;
  HAL_DMA_Init(&DMAtx);
  HAL_DMA_Start(&DMAtx, (uint32_t)data, (uint32_t)&(LCD->RAM), count);
+
+  TERN_(TFT_SHARED_IO, while (isBusy()));
 }

 void TFT_FSMC::transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count) {
@@ -28,7 +28,11 @@
 #elif defined(STM32F4xx)
  #include "stm32f4xx_hal.h"
 #else
-  #error "FSMC/FMC TFT is currently only supported on STM32F1 and STM32F4 hardware."
+  #error "FSMC TFT is currently only supported on STM32F1 and STM32F4 hardware."
+#endif
+
+#ifndef HAL_SRAM_MODULE_ENABLED
+  #error "SRAM module disabled for the STM32 framework (HAL_SRAM_MODULE_ENABLED)! Please consult the development team."
 #endif

 #ifndef LCD_READ_ID
@@ -51,12 +55,6 @@ typedef struct {
  __IO tft_data_t RAM;
 } LCD_CONTROLLER_TypeDef;

-#ifdef STM32F446xx
-  #define FMC_OR_FSMC(N) _CAT(FMC_, N)
-#else
-  #define FMC_OR_FSMC(N) _CAT(FSMC_, N)
-#endif
-
 class TFT_FSMC {
  private:
    static SRAM_HandleTypeDef SRAMx;
@@ -64,7 +62,7 @@ class TFT_FSMC {

    static LCD_CONTROLLER_TypeDef *LCD;

-    static uint32_t readID(tft_data_t inReg);
+    static uint32_t readID(const tft_data_t reg);
    static void transmit(tft_data_t data) { LCD->RAM = data; __DSB(); }
    static void transmit(uint32_t memoryIncrease, uint16_t *data, uint16_t count);
    static void transmitDMA(uint32_t memoryIncrease, uint16_t *data, uint16_t count);
@@ -96,11 +94,7 @@ class TFT_FSMC {
 #ifdef STM32F1xx
  #define FSMC_PIN_DATA   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, AFIO_NONE)
 #elif defined(STM32F4xx)
-  #ifdef STM32F446xx
-    #define FSMC_PIN_DATA   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_FMC)
-  #else
-    #define FSMC_PIN_DATA   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_FSMC)
-  #endif
+  #define FSMC_PIN_DATA   STM_PIN_DATA(STM_MODE_AF_PP, GPIO_NOPULL, GPIO_AF12_FSMC)
  #define FSMC_BANK1_1    0x60000000U
  #define FSMC_BANK1_2    0x64000000U
  #define FSMC_BANK1_3    0x68000000U
@@ -110,35 +104,35 @@ class TFT_FSMC {
 #endif

 const PinMap pinMap_FSMC[] = {
-  {PD_14,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D00
-  {PD_15,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D01
-  {PD_0,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D02
-  {PD_1,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D03
-  {PE_7,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D04
-  {PE_8,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D05
-  {PE_9,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D06
-  {PE_10,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D07
+  {PD_14,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D00
+  {PD_15,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D01
+  {PD_0,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D02
+  {PD_1,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D03
+  {PE_7,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D04
+  {PE_8,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D05
+  {PE_9,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D06
+  {PE_10,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D07
  #if DISABLED(TFT_INTERFACE_FSMC_8BIT)
-    {PE_11,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D08
-    {PE_12,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D09
-    {PE_13,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D10
-    {PE_14,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D11
-    {PE_15,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D12
-    {PD_8,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D13
-    {PD_9,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D14
-    {PD_10,  FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_D15
+    {PE_11,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D08
+    {PE_12,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D09
+    {PE_13,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D10
+    {PE_14,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D11
+    {PE_15,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D12
+    {PD_8,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D13
+    {PD_9,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D14
+    {PD_10,  FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_D15
  #endif
-  {PD_4,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_NOE
-  {PD_5,   FMC_OR_FSMC(NORSRAM_DEVICE), FSMC_PIN_DATA}, // FSMC_NWE
+  {PD_4,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_NOE
+  {PD_5,   FSMC_NORSRAM_DEVICE, FSMC_PIN_DATA}, // FSMC_NWE
  {NC,    NP,    0}
 };

 const PinMap pinMap_FSMC_CS[] = {
-  {PD_7,  (void *)FMC_OR_FSMC(NORSRAM_BANK1), FSMC_PIN_DATA}, // FSMC_NE1
+  {PD_7,  (void *)FSMC_NORSRAM_BANK1, FSMC_PIN_DATA}, // FSMC_NE1
  #ifdef PF0
-    {PG_9,  (void *)FMC_OR_FSMC(NORSRAM_BANK2), FSMC_PIN_DATA}, // FSMC_NE2
-    {PG_10, (void *)FMC_OR_FSMC(NORSRAM_BANK3), FSMC_PIN_DATA}, // FSMC_NE3
-    {PG_12, (void *)FMC_OR_FSMC(NORSRAM_BANK4), FSMC_PIN_DATA}, // FSMC_NE4
+    {PG_9,  (void *)FSMC_NORSRAM_BANK2, FSMC_PIN_DATA}, // FSMC_NE2
+    {PG_10, (void *)FSMC_NORSRAM_BANK3, FSMC_PIN_DATA}, // FSMC_NE3
+    {PG_12, (void *)FSMC_NORSRAM_BANK4, FSMC_PIN_DATA}, // FSMC_NE4
  #endif
  {NC,    NP,    0}
 };
@@ -41,7 +41,7 @@ typedef uint32_t hal_timer_t;
 #define FTM0_TIMER_PRESCALE_BITS 0b011
 #define FTM1_TIMER_PRESCALE_BITS 0b010

-#define FTM0_TIMER_RATE (F_BUS / (FTM0_TIMER_PRESCALE)) // 60MHz / 8 = 7.5MHz
+#define FTM0_TIMER_RATE (F_BUS / (FTM0_TIMER_PRESCALE)) // 60MHz / 8 = 7500kHz
 #define FTM1_TIMER_RATE (F_BUS / (FTM1_TIMER_PRESCALE)) // 60MHz / 4 = 15MHz

 #define HAL_TIMER_RATE         (FTM0_TIMER_RATE)
@@ -37,8 +37,6 @@
  #define HAL_PATH(PATH, NAME) XSTR(PATH/HAL/LPC1768/NAME)
 #elif defined(ARDUINO_ARCH_HC32)
  #define HAL_PATH(PATH, NAME) XSTR(PATH/HAL/HC32/NAME)
-#elif defined(TARGET_LPC4078)
-  #define HAL_PATH(PATH, NAME) XSTR(PATH/HAL/LPC4078/NAME)
 #elif defined(__STM32F1__) || defined(TARGET_STM32F1)
  #define HAL_PATH(PATH, NAME) XSTR(PATH/HAL/STM32F1/NAME)
 #elif defined(ARDUINO_ARCH_STM32)
@@ -76,8 +76,6 @@
  #include "../LPC1768/Servo.h"
 #elif defined(ARDUINO_ARCH_HC32)
  #include "../HC32/Servo.h"
-#elif defined(TARGET_LPC4078)
-  #include "../LPC4078/Servo.h"
 #elif defined(__STM32F1__) || defined(TARGET_STM32F1)
  #include "../STM32F1/Servo.h"
 #elif defined(ARDUINO_ARCH_STM32)
@@ -77,6 +77,8 @@
  #include "lcd/e3v2/common/encoder.h"
  #if ENABLED(DWIN_CREALITY_LCD)
    #include "lcd/e3v2/creality/dwin.h"
+  #elif ENABLED(DWIN_LCD_PROUI)
+    #include "lcd/e3v2/proui/dwin.h"
  #elif ENABLED(DWIN_CREALITY_LCD_JYERSUI)
    #include "lcd/e3v2/jyersui/dwin.h"
  #endif
@@ -266,7 +268,7 @@ PGMSTR(M112_KILL_STR, "M112 Shutdown");
 MarlinState marlin_state = MF_INITIALIZING;

 // For M109 and M190, this flag may be cleared (by M108) to exit the wait loop
-bool wait_for_heatup = false;
+bool wait_for_heatup = true;

 // For M0/M1, this flag may be cleared (by M108) to exit the wait-for-user loop
 #if HAS_RESUME_CONTINUE
@@ -474,16 +476,11 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {

  #if HAS_KILL

-    // Check if the kill button was pressed and wait to ensure the signal is not noise
-    // typically caused by poor insulation and grounding on LCD cables.
-    // Lower numbers here will increase response time and therefore safety rating.
-    // It is recommended to set this as low as possibe without false triggers.
+    // Check if the kill button was pressed and wait just in case it was an accidental
+    // key kill key press
    // -------------------------------------------------------------------------------
-    #ifndef KILL_DELAY
-      #define KILL_DELAY 250
-    #endif
-
    static int killCount = 0;   // make the inactivity button a bit less responsive
+    const int KILL_DELAY = 750;
    if (kill_state())
      killCount++;
    else if (killCount > 0)
@@ -674,12 +671,6 @@ inline void manage_inactivity(const bool no_stepper_sleep=false) {

  TERN_(HOTEND_IDLE_TIMEOUT, hotend_idle.check());

-  #if ANY(PSU_CONTROL, AUTO_POWER_CONTROL) && PIN_EXISTS(PS_ON_EDM)
-    if ( ELAPSED(ms, powerManager.last_state_change_ms + PS_EDM_RESPONSE)
-      && (READ(PS_ON_PIN) != READ(PS_ON_EDM_PIN) || TERN0(PSU_OFF_REDUNDANT, extDigitalRead(PS_ON1_PIN) != extDigitalRead(PS_ON1_EDM_PIN)))
-    ) kill(GET_TEXT_F(MSG_POWER_EDM_FAULT));
-  #endif
-
  #if ENABLED(EXTRUDER_RUNOUT_PREVENT)
    if (thermalManager.degHotend(active_extruder) > (EXTRUDER_RUNOUT_MINTEMP)
      && ELAPSED(ms, gcode.previous_move_ms + SEC_TO_MS(EXTRUDER_RUNOUT_SECONDS))
@@ -1597,11 +1588,11 @@ void setup() {
    SERIAL_ECHO_TERNARY(err, "BL24CXX Check ", "failed", "succeeded", "!\n");
  #endif

-  #if ENABLED(DWIN_CREALITY_LCD)
+  #if HAS_DWIN_E3V2_BASIC
    SETUP_RUN(dwinInitScreen());
  #endif

-  #if HAS_SERVICE_INTERVALS && DISABLED(DWIN_CREALITY_LCD)
+  #if HAS_SERVICE_INTERVALS && !HAS_DWIN_E3V2_BASIC
    SETUP_RUN(ui.reset_status(true));  // Show service messages or keep current status
  #endif

@@ -131,7 +131,6 @@
 #define BOARD_PXMALION_CORE_I3        1164  // Pxmalion Core I3
 #define BOARD_PANOWIN_CUTLASS         1165  // Panowin Cutlass (as found in the Panowin F1)
 #define BOARD_KODAMA_BARDO            1166  // Kodama Bardo V1.x (as found in the Kodama Trinus)
-#define BOARD_DAGOMA_D6               1167  // Dagoma D6 (as found in the Dagoma DiscoUltimate V2 TMC)

 //
 // RAMBo and derivatives
@@ -383,9 +382,9 @@
 #define BOARD_CREALITY_V452           5050  // Creality v4.5.2 (STM32F103RC / STM32F103RE)
 #define BOARD_CREALITY_V453           5051  // Creality v4.5.3 (STM32F103RC / STM32F103RE)
 #define BOARD_CREALITY_V521           5052  // Creality v5.2.1 (STM32F103VE) as found in the SV04
-#define BOARD_CREALITY_V24S1          5053  // Creality v2.4.S1 (STM32F103RC / STM32F103RE) CR-FDM-v2.4.S1_v101 as found in the Ender-7
-#define BOARD_CREALITY_V24S1_301      5054  // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) CR-FDM-v24S1_301 as found in the Ender-3 S1
-#define BOARD_CREALITY_V25S1          5055  // Creality v2.5.S1 (STM32F103RE) CR-FDM-v2.5.S1_100 as found in the CR-10 Smart Pro
+#define BOARD_CREALITY_V24S1          5053  // Creality v2.4.S1 (STM32F103RC / STM32F103RE) v101 as found in the Ender-7
+#define BOARD_CREALITY_V24S1_301      5054  // Creality v2.4.S1_301 (STM32F103RC / STM32F103RE) v301 as found in the Ender-3 S1
+#define BOARD_CREALITY_V25S1          5055  // Creality v2.5.S1 (STM32F103RE) as found in the CR-10 Smart Pro
 #define BOARD_TRIGORILLA_PRO          5056  // Trigorilla Pro (STM32F103ZE)
 #define BOARD_FLY_MINI                5057  // FLYmaker FLY MINI (STM32F103RC)
 #define BOARD_FLSUN_HISPEED           5058  // FLSUN HiSpeedV1 (STM32F103VE)
@@ -410,7 +409,6 @@

 #define BOARD_TEENSY31_32             5100  // Teensy3.1 and Teensy3.2
 #define BOARD_TEENSY35_36             5101  // Teensy3.5 and Teensy3.6
-#define BOARD_EBAB                    5102

 //
 // STM32 ARM Cortex-M4F
@@ -461,7 +459,7 @@
 #define BOARD_OPULO_LUMEN_REV4        5242  // Opulo Lumen PnP Controller REV4 (STM32F407VE / STM32F407VG)
 #define BOARD_FYSETC_SPIDER_KING407   5243  // FYSETC Spider King407 (STM32F407ZG)
 #define BOARD_MKS_SKIPR_V1            5244  // MKS SKIPR v1.0 all-in-one board (STM32F407VE)
-#define BOARD_TRONXY_CXY_446_V10      5245  // TRONXY CXY-446-V10-220413/CXY-V6-191121 (STM32F446ZE)
+#define BOARD_TRONXY_V10              5245  // TRONXY V10 (STM32F446ZE)
 #define BOARD_CREALITY_F401RE         5246  // Creality CR4NS200141C13 (STM32F401RE) as found in the Ender-5 S1
 #define BOARD_BLACKPILL_CUSTOM        5247  // Custom board based on STM32F401CDU6.
 #define BOARD_I3DBEEZ9_V1             5248  // I3DBEEZ9 V1 (STM32F407ZG)
@@ -469,11 +467,6 @@
 #define BOARD_FYSETC_CHEETAH_V30      5250  // FYSETC Cheetah V3.0 (STM32F446RC)
 #define BOARD_BLACKBEEZMINI_V1        5251  // BlackBeezMini V1 (STM32F401CCU6)

-//
-// Other ARM Cortex-M4
-//
-#define BOARD_CREALITY_CR4NS          5300  // Creality CR4NS200320C13 (GD32F303RET6) as found in the Ender-3 V3 SE
-
 //
 // ARM Cortex-M7
 //
@@ -41,6 +41,8 @@
 #define _TMC2208_STANDALONE 0x2208B
 #define _TMC2209            0x2209A
 #define _TMC2209_STANDALONE 0x2209B
+#define _TMC26X             0x2600A
+#define _TMC26X_STANDALONE  0x2600B
 #define _TMC2660            0x2660A
 #define _TMC2660_STANDALONE 0x2660B
 #define _TMC5130            0x5130A
@@ -105,8 +107,8 @@

 #if (    HAS_DRIVER(TMC2130_STANDALONE) || HAS_DRIVER(TMC2160_STANDALONE) \
      || HAS_DRIVER(TMC2208_STANDALONE) || HAS_DRIVER(TMC2209_STANDALONE) \
-      || HAS_DRIVER(TMC2660_STANDALONE) || HAS_DRIVER(TMC5130_STANDALONE) \
-      || HAS_DRIVER(TMC5160_STANDALONE) )
+      || HAS_DRIVER(TMC26X_STANDALONE)  || HAS_DRIVER(TMC2660_STANDALONE) \
+      || HAS_DRIVER(TMC5130_STANDALONE) || HAS_DRIVER(TMC5160_STANDALONE) )
  #define HAS_TRINAMIC_STANDALONE 1
 #endif

@@ -123,13 +125,13 @@
                           || AXIS_DRIVER_TYPE(A,TMC2660) \
                           || AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )

-#define AXIS_IS_TMC_CONFIG AXIS_IS_TMC
+#define AXIS_IS_TMC_CONFIG(A)   ( AXIS_IS_TMC(A) || AXIS_DRIVER_TYPE(A,TMC26X) )

 // Test for a driver that uses SPI - this allows checking whether a _CS_ pin
 // is considered sensitive
 #define AXIS_HAS_SPI(A)  (    AXIS_DRIVER_TYPE(A,TMC2130) || AXIS_DRIVER_TYPE(A,TMC2160) \
-                           || AXIS_DRIVER_TYPE(A,TMC2660) || AXIS_DRIVER_TYPE(A,TMC5130) \
-                           || AXIS_DRIVER_TYPE(A,TMC5160) )
+                           || AXIS_DRIVER_TYPE(A,TMC26X)  || AXIS_DRIVER_TYPE(A,TMC2660) \
+                           || AXIS_DRIVER_TYPE(A,TMC5130) || AXIS_DRIVER_TYPE(A,TMC5160) )

 #define AXIS_HAS_UART(A) ( AXIS_DRIVER_TYPE(A,TMC2208) || AXIS_DRIVER_TYPE(A,TMC2209) )

@@ -182,8 +184,10 @@
 #if ANY_AXIS_HAS(SPI)
  #define HAS_TMC_SPI 1
 #endif
-#if HAS_STALLGUARD || HAS_DRIVER(TMC2160_STANDALONE) || HAS_DRIVER(TMC2130_STANDALONE) \
-                   || HAS_DRIVER(TMC2209_STANDALONE) || HAS_DRIVER(TMC2660_STANDALONE) \
-                   || HAS_DRIVER(TMC5130_STANDALONE) || HAS_DRIVER(TMC5160_STANDALONE)
-  #define HAS_DIAG_PINS 1
+
+//
+// TMC26XX Stepper Drivers
+//
+#if HAS_DRIVER(TMC26X)
+  #define HAS_TMC26X 1
 #endif
@@ -135,7 +135,6 @@
 #define STR_BUSY_PAUSED_FOR_USER            "busy: paused for user"
 #define STR_BUSY_PAUSED_FOR_INPUT           "busy: paused for input"
 #define STR_Z_MOVE_COMP                     "Z_move_comp"
-#define STR_LINE_NO                         "Line: "
 #define STR_RESEND                          "Resend: "
 #define STR_UNKNOWN_COMMAND                 "Unknown command: \""
 #define STR_ACTIVE_EXTRUDER                 "Active Extruder: "
@@ -89,8 +89,7 @@
 #define HYPOT2(x,y) (sq(x)+sq(y))
 #define NORMSQ(x,y,z) (sq(x)+sq(y)+sq(z))

-#define FLOAT_SQ(I) float(sq(I))
-#define CIRCLE_AREA(R) (float(M_PI) * FLOAT_SQ(R))
+#define CIRCLE_AREA(R) (float(M_PI) * sq(float(R)))
 #define CIRCLE_CIRC(R) (2 * float(M_PI) * float(R))

 #define SIGN(a) ({__typeof__(a) _a = (a); (_a>0)-(_a<0);})
@@ -143,13 +143,13 @@ public:

  // Set with format string and arguments, like printf
  template<typename... Args>
-  MString& setf_P(PGM_P const pfmt, Args... more) { SNPRINTF_P(str, SIZE, pfmt, more...); debug(F("setf_P")); return *this; }
+  MString& setf_P(PGM_P const fmt, Args... more) { SNPRINTF_P(str, SIZE, fmt, more...); debug(F("setf_P")); return *this; }

  template<typename... Args>
-  MString& setf(const char *fmt, Args... more) { SNPRINTF(str, SIZE, fmt, more...); debug(F("setf")); return *this; }
+  MString& setf(const char *fmt, Args... more)   { SNPRINTF(str, SIZE, fmt, more...);   debug(F("setf"));   return *this; }

  template<typename... Args>
-  MString& setf(FSTR_P const ffmt, Args... more) { return setf_P(FTOP(ffmt), more...); }
+  MString& setf(FSTR_P const fmt, Args... more)  { return setf_P(FTOP(fmt), more...); }

  // Chainable String appenders
  MString& append()                           { debug(F("nil")); return *this; } // for macros that might emit no output
@@ -206,9 +206,9 @@ public:
  MString& append(const spaces_t &s) { return append(repchr_t(' ', s.count)); }

  template<typename... Args>
-  MString& appendf_P(PGM_P const pfmt, Args... more) {
+  MString& appendf_P(PGM_P const fmt, Args... more) {
    int sz = length();
-    if (sz < SIZE) SNPRINTF_P(str + sz, SIZE - sz, pfmt, more...);
+    if (sz < SIZE) SNPRINTF_P(str + sz, SIZE - sz, fmt, more...);
    debug(F("appendf_P"));
    return *this;
  }
@@ -271,13 +271,13 @@ public:
  SString& set() { super::set(); return *this; }

  template<typename... Args>
-  SString& setf_P(PGM_P const pfmt, Args... more) { super::setf_P(pfmt, more...); return *this; }
+  SString& setf_P(PGM_P const fmt, Args... more) { super::setf_P(fmt, more...); return *this; }

  template<typename... Args>
-  SString& setf(const char *fmt, Args... more)    { super::setf(fmt, more...); return *this; }
+  SString& setf(const char *fmt, Args... more)   { super::setf(fmt, more...); return *this; }

  template<typename... Args>
-  SString& setf(FSTR_P const ffmt, Args... more)  { super::setf(ffmt, more...); return *this; }
+  SString& setf(FSTR_P const fmt, Args... more)  { super::setf(fmt, more...); return *this; }

  template <typename T>
  SString& set(const T &v) { super::set(v); return *this; }
@@ -46,7 +46,6 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define NUM_AXIS_ELEM(O)      NUM_AXIS_LIST(O.x, O.y, O.z, O.i, O.j, O.k, O.u, O.v, O.w)
 #define NUM_AXIS_DECL(T,V)    NUM_AXIS_LIST(T x=V, T y=V, T z=V, T i=V, T j=V, T k=V, T u=V, T v=V, T w=V)
 #define MAIN_AXIS_NAMES       NUM_AXIS_LIST(X, Y, Z, I, J, K, U, V, W)
-#define MAIN_AXIS_NAMES_LC    NUM_AXIS_LIST(x, y, z, i, j, k, u, v, w)
 #define STR_AXES_MAIN         NUM_AXIS_GANG("X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W)

 #define LOGICAL_AXIS_GANG(E,V...)  NUM_AXIS_GANG(V) GANG_ITEM_E(E)
@@ -59,21 +58,17 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define LOGICAL_AXIS_ELEM(O)       LOGICAL_AXIS_LIST(O.e, O.x, O.y, O.z, O.i, O.j, O.k, O.u, O.v, O.w)
 #define LOGICAL_AXIS_DECL(T,V)     LOGICAL_AXIS_LIST(T e=V, T x=V, T y=V, T z=V, T i=V, T j=V, T k=V, T u=V, T v=V, T w=V)
 #define LOGICAL_AXIS_NAMES         LOGICAL_AXIS_LIST(E, X, Y, Z, I, J, K, U, V, W)
-#define LOGICAL_AXIS_NAMES_LC      LOGICAL_AXIS_LIST(e, x, y, z, i, j, k, u, v, w)
 #define LOGICAL_AXIS_MAP(F)        MAP(F, LOGICAL_AXIS_NAMES)
-#define LOGICAL_AXIS_MAP_LC(F)     MAP(F, LOGICAL_AXIS_NAMES_LC)
 #define STR_AXES_LOGICAL           LOGICAL_AXIS_GANG("E", "X", "Y", "Z", STR_I, STR_J, STR_K, STR_U, STR_V, STR_W)

 #if NUM_AXES
  #define NUM_AXES_SEP ,
  #define MAIN_AXIS_MAP(F)    MAP(F, MAIN_AXIS_NAMES)
-  #define MAIN_AXIS_MAP_LC(F) MAP(F, MAIN_AXIS_NAMES_LC)
  #define OPTARGS_NUM(T)      , NUM_AXIS_ARGS(T)
  #define OPTARGS_LOGICAL(T)  , LOGICAL_AXIS_ARGS(T)
 #else
  #define NUM_AXES_SEP
  #define MAIN_AXIS_MAP(F)
-  #define MAIN_AXIS_MAP_LC(F)
  #define OPTARGS_NUM(T)
  #define OPTARGS_LOGICAL(T)
 #endif
@@ -84,7 +79,6 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define NUM_AXIS_ARGS_(T)       NUM_AXIS_ARGS(T) NUM_AXES_SEP
 #define NUM_AXIS_ELEM_(T)       NUM_AXIS_ELEM(T) NUM_AXES_SEP
 #define MAIN_AXIS_NAMES_        MAIN_AXIS_NAMES NUM_AXES_SEP
-#define MAIN_AXIS_NAMES_LC_     MAIN_AXIS_NAMES_LC NUM_AXES_SEP

 #if LOGICAL_AXES
  #define LOGICAL_AXES_SEP ,
@@ -98,7 +92,6 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 #define LOGICAL_AXIS_ARGS_(T)       LOGICAL_AXIS_ARGS(T) LOGICAL_AXES_SEP
 #define LOGICAL_AXIS_ELEM_(T)       LOGICAL_AXIS_ELEM(T) LOGICAL_AXES_SEP
 #define LOGICAL_AXIS_NAMES_         LOGICAL_AXIS_NAMES LOGICAL_AXES_SEP
-#define LOGICAL_AXIS_NAMES_LC_      LOGICAL_AXIS_NAMES_LC LOGICAL_AXES_SEP

 #define SECONDARY_AXIS_GANG(V...) GANG_N(SECONDARY_AXES, V)
 #define SECONDARY_AXIS_CODE(V...) CODE_N(SECONDARY_AXES, V)
@@ -166,7 +159,7 @@ template <class L, class R> struct IF<true, L, R> { typedef L type; };
 // General Flags for some number of states
 template<size_t N>
 struct Flags {
-  typedef bits_t(N) flagbits_t;
+  typedef uvalue_t(N) flagbits_t;
  typedef struct { bool b0:1, b1:1, b2:1, b3:1, b4:1, b5:1, b6:1, b7:1; } N8;
  typedef struct { bool b0:1, b1:1, b2:1, b3:1, b4:1, b5:1, b6:1, b7:1, b8:1, b9:1, b10:1, b11:1, b12:1, b13:1, b14:1, b15:1; } N16;
  typedef struct { bool b0:1,  b1:1,  b2:1,  b3:1,  b4:1,  b5:1,  b6:1,  b7:1,  b8:1,  b9:1, b10:1, b11:1, b12:1, b13:1, b14:1, b15:1,
@@ -226,7 +219,7 @@ typedef struct {
 //
 //  - X_AXIS, Y_AXIS, and Z_AXIS should be used for axes in Cartesian space
 //  - A_AXIS, B_AXIS, and C_AXIS should be used for Steppers, corresponding to XYZ on Cartesians
-//  - X_HEAD, Y_HEAD, and Z_HEAD should be used for axes on Core kinematics
+//  - X_HEAD, Y_HEAD, and Z_HEAD should be used for Steppers on Core kinematics
 //
 enum AxisEnum : uint8_t {

@@ -456,7 +449,7 @@ struct XYval {
  // Length reduced to one dimension
  FI constexpr T magnitude()    const { return (T)sqrtf(x*x + y*y); }
  // Pointer to the data as a simple array
-  explicit FI operator T* ()          { return pos; }
+  FI operator T* ()                   { return pos; }
  // If any element is true then it's true
  FI constexpr operator bool()  const { return x || y; }
  // Smallest element
@@ -606,13 +599,13 @@ struct XYZval {
  // Length reduced to one dimension
  FI constexpr T magnitude()    const { return (T)TERN(HAS_X_AXIS, sqrtf(NUM_AXIS_GANG(x*x, + y*y, + z*z, + i*i, + j*j, + k*k, + u*u, + v*v, + w*w)), 0); }
  // Pointer to the data as a simple array
-  explicit FI operator T* ()          { return pos; }
+  FI operator T* ()                   { return pos; }
  // If any element is true then it's true
  FI constexpr operator bool()  const { return 0 NUM_AXIS_GANG(|| x, || y, || z, || i, || j, || k, || u, || v, || w); }
  // Smallest element
-  FI constexpr T small()        const { return TERN0(HAS_X_AXIS, _MIN(NUM_AXIS_LIST(x, y, z, i, j, k, u, v, w))); }
+  FI constexpr T small()        const { return TERN(HAS_X_AXIS, _MIN(NUM_AXIS_LIST(x, y, z, i, j, k, u, v, w)), 0); }
  // Largest element
-  FI constexpr T large()        const { return TERN0(HAS_X_AXIS, _MAX(NUM_AXIS_LIST(x, y, z, i, j, k, u, v, w))); }
+  FI constexpr T large()        const { return TERN(HAS_X_AXIS, _MAX(NUM_AXIS_LIST(x, y, z, i, j, k, u, v, w)), 0); }

  // Explicit copy and copies with conversion
  FI constexpr XYZval<T>           copy() const { XYZval<T> o = *this; return o; }
@@ -754,7 +747,7 @@ struct XYZEval {
  // Length reduced to one dimension
  FI constexpr T magnitude()    const { return (T)sqrtf(LOGICAL_AXIS_GANG(+ e*e, + x*x, + y*y, + z*z, + i*i, + j*j, + k*k, + u*u, + v*v, + w*w)); }
  // Pointer to the data as a simple array
-  explicit FI operator T* ()          { return pos; }
+  FI operator T* ()                   { return pos; }
  // If any element is true then it's true
  FI constexpr operator bool()  const { return 0 LOGICAL_AXIS_GANG(|| e, || x, || y, || z, || i, || j, || k, || u, || v, || w); }
  // Smallest element
@@ -1091,7 +1084,6 @@ public:
  FI bool toggle(const AxisEnum n) { TBI(bits, n); return TEST(bits, n); }
  FI void bset(const AxisEnum n) { SBI(bits, n); }
  FI void bclr(const AxisEnum n) { CBI(bits, n); }
-  FI void bset(const AxisEnum n, const bool b) { if (b) bset(n); else bclr(n); }

  // Accessor via an AxisEnum (or any integer) [index]
  FI bool operator[](const int n) const { return TEST(bits, n); }
@@ -46,16 +46,10 @@ BDS_Leveling bdl;
 #define DEBUG_OUT ENABLED(DEBUG_OUT_BD)
 #include "../../../core/debug_out.h"

-/**
- * M102 S<#> : Set adjustable Z height in 0.1mm units (10ths of a mm)
- *             (e.g., 'M102 S4' enables adjusting for Z <= 0.4mm)
- * M102 S0   : Disable adjustable Z height
- *
- * M102 S-1  : Read BDsensor version
- * M102 S-2  : Read BDsensor distance value
- * M102 S-5  : Read raw Calibration data
- * M102 S-6  : Start Calibration
- */
+// M102 S-5   Read raw Calibrate data
+// M102 S-6   Start Calibrate
+// M102 S4    Set the adjustable Z height value (e.g., 'M102 S4' means it will do adjusting while the Z height <= 0.4mm , disable with 'M102 S0'.)
+// M102 S-1   Read sensor information

 #define MAX_BD_HEIGHT                 4.0f
 #define CMD_READ_VERSION              1016
@@ -63,7 +63,7 @@
     */
    void mesh_bed_leveling::line_to_destination(const_feedRate_t scaled_fr_mm_s, uint8_t x_splits, uint8_t y_splits) {
      // Get current and destination cells for this line
-      xy_uint8_t scel = cell_indexes(current_position), ecel = cell_indexes(destination);
+      xy_int8_t scel = cell_indexes(current_position), ecel = cell_indexes(destination);
      NOMORE(scel.x, GRID_MAX_CELLS_X - 1);
      NOMORE(scel.y, GRID_MAX_CELLS_Y - 1);
      NOMORE(ecel.x, GRID_MAX_CELLS_X - 1);
@@ -80,7 +80,7 @@

      float normalized_dist;
      xyze_pos_t dest;
-      const uint8_t gcx = _MAX(scel.x, ecel.x), gcy = _MAX(scel.y, ecel.y);
+      const int8_t gcx = _MAX(scel.x, ecel.x), gcy = _MAX(scel.y, ecel.y);

      // Crosses on the X and not already split on this X?
      // The x_splits flags are insurance against rounding errors.
@@ -95,7 +95,7 @@ public:
  static void report_current_mesh();
  static void report_state();
  static void save_ubl_active_state_and_disable();
-  static void restore_ubl_active_state(const bool is_done=true);
+  static void restore_ubl_active_state_and_leave();
  static void display_map(const uint8_t) __O0;
  static mesh_index_pair find_closest_mesh_point_of_type(const MeshPointType, const xy_pos_t&, const bool=false, MeshFlags *done_flags=nullptr) __O0;
  static mesh_index_pair find_furthest_invalid_mesh_point() __O0;
@@ -309,7 +309,7 @@ void unified_bed_leveling::G29() {
    #if ALL(DWIN_LCD_PROUI, ZHOME_BEFORE_LEVELING)
      save_ubl_active_state_and_disable();
      gcode.process_subcommands_now(F("G28Z"));
-      restore_ubl_active_state(false); // ...without telling ExtUI "done"
+      restore_ubl_active_state_and_leave();
    #else
      // Send 'N' to force homing before G29 (internal only)
      if (axes_should_home() || parser.seen_test('N')) gcode.home_all_axes();
@@ -425,7 +425,7 @@ void unified_bed_leveling::G29() {
    if (parser.seen_test('J')) {
      save_ubl_active_state_and_disable();
      tilt_mesh_based_on_probed_grid(param.J_grid_size == 0); // Zero size does 3-Point
-      restore_ubl_active_state();
+      restore_ubl_active_state_and_leave();
      #if ENABLED(UBL_G29_J_RECENTER)
        do_blocking_move_to_xy(0.5f * ((MESH_MIN_X) + (MESH_MAX_X)), 0.5f * ((MESH_MIN_Y) + (MESH_MAX_Y)));
      #endif
@@ -754,6 +754,7 @@ void unified_bed_leveling::shift_mesh_height() {

    TERN_(HAS_MARLINUI_MENU, ui.capture());
    TERN_(EXTENSIBLE_UI, ExtUI::onLevelingStart());
+    TERN_(DWIN_LCD_PROUI, dwinLevelingStart());

    save_ubl_active_state_and_disable();  // No bed level correction so only raw data is obtained
    grid_count_t count = GRID_MAX_POINTS;
@@ -765,8 +766,9 @@ void unified_bed_leveling::shift_mesh_height() {

      const grid_count_t point_num = (GRID_MAX_POINTS - count) + 1;
      SERIAL_ECHOLNPGM("Probing mesh point ", point_num, "/", GRID_MAX_POINTS, ".");
-      TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/%i"), GET_TEXT_F(MSG_PROBING_POINT), point_num, int(GRID_MAX_POINTS)));
+      TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/%i"), GET_TEXT(MSG_PROBING_POINT), point_num, int(GRID_MAX_POINTS)));
      TERN_(HAS_BACKLIGHT_TIMEOUT, ui.refresh_backlight_timeout());
+      TERN_(DWIN_LCD_PROUI, dwinRedrawScreen());

      #if HAS_MARLINUI_MENU
        if (ui.button_pressed()) {
@@ -776,7 +778,8 @@ void unified_bed_leveling::shift_mesh_height() {
          ui.quick_feedback();
          ui.release();
          probe.stow(); // Release UI before stow to allow for PAUSE_BEFORE_DEPLOY_STOW
-          return restore_ubl_active_state();
+          TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
+          return restore_ubl_active_state_and_leave();
        }
      #endif

@@ -812,12 +815,15 @@ void unified_bed_leveling::shift_mesh_height() {

    probe.move_z_after_probing();

+    restore_ubl_active_state_and_leave();
+
    do_blocking_move_to_xy(
      constrain(nearby.x - probe.offset_xy.x, MESH_MIN_X, MESH_MAX_X),
      constrain(nearby.y - probe.offset_xy.y, MESH_MIN_Y, MESH_MAX_Y)
    );

-    restore_ubl_active_state();
+    TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
+    TERN_(DWIN_LCD_PROUI, dwinLevelingDone());
  }

 #endif // HAS_BED_PROBE
@@ -926,7 +932,7 @@ void set_message_with_feedback(FSTR_P const fstr) {
    if (param.V_verbosity > 1)
      SERIAL_ECHOLNPGM("Business Card is ", p_float_t(thickness, 4), "mm thick.");

-    restore_ubl_active_state();
+    restore_ubl_active_state_and_leave();

    return thickness;
  }
@@ -981,7 +987,7 @@ void set_message_with_feedback(FSTR_P const fstr) {
      if (_click_and_hold([]{
        SERIAL_ECHOLNPGM("\nMesh only partially populated.");
        do_z_clearance(Z_CLEARANCE_DEPLOY_PROBE);
-      })) return restore_ubl_active_state();
+      })) return restore_ubl_active_state_and_leave();

      // Store the Z position minus the shim height
      z_values[lpos.x][lpos.y] = current_position.z - thick;
@@ -996,8 +1002,10 @@ void set_message_with_feedback(FSTR_P const fstr) {

    if (do_ubl_mesh_map) display_map(param.T_map_type);  // show user where we're probing

-    restore_ubl_active_state();
+    restore_ubl_active_state_and_leave();
    do_blocking_move_to_xy_z(pos, Z_CLEARANCE_DEPLOY_PROBE);
+
+    TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
  }

  /**
@@ -1103,7 +1111,7 @@ void set_message_with_feedback(FSTR_P const fstr) {
    } while (lpos.x >= 0 && --param.R_repetition > 0);

    if (do_ubl_mesh_map) display_map(param.T_map_type);
-    restore_ubl_active_state();
+    restore_ubl_active_state_and_leave();

    do_blocking_move_to_xy_z(pos, Z_TWEEN_SAFE_CLEARANCE);

@@ -1255,20 +1263,17 @@ void unified_bed_leveling::save_ubl_active_state_and_disable() {
  set_bed_leveling_enabled(false);
 }

-void unified_bed_leveling::restore_ubl_active_state(const bool is_done/*=true*/) {
+void unified_bed_leveling::restore_ubl_active_state_and_leave() {
  TERN_(HAS_MARLINUI_MENU, ui.release());
  #if ENABLED(UBL_DEVEL_DEBUGGING)
    if (--ubl_state_recursion_chk) {
-      SERIAL_ECHOLNPGM("restore_ubl_active_state() called too many times.");
+      SERIAL_ECHOLNPGM("restore_ubl_active_state_and_leave() called too many times.");
      set_message_with_feedback(GET_TEXT_F(MSG_UBL_RESTORE_ERROR));
      return;
    }
  #endif
  set_bed_leveling_enabled(ubl_state_at_invocation);
-
-  if (is_done) {
-    TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
-  }
+  TERN_(EXTENSIBLE_UI, ExtUI::onLevelingDone());
 }

 mesh_index_pair unified_bed_leveling::find_furthest_invalid_mesh_point() {
@@ -1494,7 +1499,7 @@ void unified_bed_leveling::smart_fill_mesh() {

      for (uint8_t i = 0; i < 3; ++i) {
        SERIAL_ECHOLNPGM("Tilting mesh (", i + 1, "/3)");
-        TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/3"), GET_TEXT_F(MSG_LCD_TILTING_MESH), i + 1));
+        TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/3"), GET_TEXT(MSG_LCD_TILTING_MESH), i + 1));

        measured_z = probe.probe_at_point(points[i], i < 2 ? PROBE_PT_RAISE : PROBE_PT_LAST_STOW, param.V_verbosity);
        if ((abort_flag = isnan(measured_z))) break;
@@ -1550,7 +1555,7 @@ void unified_bed_leveling::smart_fill_mesh() {
          #endif

          SERIAL_ECHOLNPGM("Tilting mesh point ", point_num, "/", total_points, "\n");
-          TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/%i"), GET_TEXT_F(MSG_LCD_TILTING_MESH), point_num, total_points));
+          TERN_(HAS_STATUS_MESSAGE, ui.status_printf(0, F(S_FMT " %i/%i"), GET_TEXT(MSG_LCD_TILTING_MESH), point_num, total_points));

          measured_z = probe.probe_at_point(rpos, parser.seen_test('E') ? PROBE_PT_STOW : PROBE_PT_RAISE, param.V_verbosity); // TODO: Needs error handling

@@ -137,7 +137,7 @@ void FWRetract::retract(const bool retracting E_OPTARG(bool swapping/*=false*/))
    // Retract by moving from a faux E position back to the current E position
    current_retract[active_extruder] = base_retract;
    prepare_internal_move_to_destination(                 // set current from destination
-      MUL_TERN(RETRACT_SYNC_MIXING, settings.retract_feedrate_mm_s, MIXING_STEPPERS)
+      settings.retract_feedrate_mm_s * TERN1(RETRACT_SYNC_MIXING, (MIXING_STEPPERS))
    );

    // Is a Z hop set, and has the hop not yet been done?
@@ -165,7 +165,8 @@ void FWRetract::retract(const bool retracting E_OPTARG(bool swapping/*=false*/))

    // Recover E, set_current_to_destination
    prepare_internal_move_to_destination(
-      MUL_TERN(RETRACT_SYNC_MIXING, swapping ? settings.swap_retract_recover_feedrate_mm_s : settings.retract_recover_feedrate_mm_s, MIXING_STEPPERS)
+      (swapping ? settings.swap_retract_recover_feedrate_mm_s : settings.retract_recover_feedrate_mm_s)
+      * TERN1(RETRACT_SYNC_MIXING, (MIXING_STEPPERS))
    );
  }

@@ -211,8 +212,6 @@ void FWRetract::M207() {
 }

 void FWRetract::M207_report() {
-  TERN_(MARLIN_SMALL_BUILD, return);
-
  SERIAL_ECHOLNPGM_P(
      PSTR("  M207 S"), LINEAR_UNIT(settings.retract_length)
    , PSTR(" W"), LINEAR_UNIT(settings.swap_retract_length)
@@ -238,8 +237,6 @@ void FWRetract::M208() {
 }

 void FWRetract::M208_report() {
-  TERN_(MARLIN_SMALL_BUILD, return);
-
  SERIAL_ECHOLNPGM(
      "  M208 S", LINEAR_UNIT(settings.retract_recover_extra)
    , " W", LINEAR_UNIT(settings.swap_retract_recover_extra)
@@ -261,8 +258,6 @@ void FWRetract::M208_report() {
  }

  void FWRetract::M209_report() {
-    TERN_(MARLIN_SMALL_BUILD, return);
-
    SERIAL_ECHOLNPGM("  M209 S", AS_DIGIT(autoretract_enabled));
  }

@@ -186,13 +186,13 @@ void HostUI::action(FSTR_P const fstr, const bool eol) {
        switch (response) {

          case 0: // "Purge More" button
-            #if ENABLED(M600_PURGE_MORE_RESUMABLE)
+            #if ALL(M600_PURGE_MORE_RESUMABLE, ADVANCED_PAUSE_FEATURE)
              pause_menu_response = PAUSE_RESPONSE_EXTRUDE_MORE;  // Simulate menu selection (menu exits, doesn't extrude more)
            #endif
            break;

          case 1: // "Continue" / "Disable Runout" button
-            #if ENABLED(M600_PURGE_MORE_RESUMABLE)
+            #if ALL(M600_PURGE_MORE_RESUMABLE, ADVANCED_PAUSE_FEATURE)
              pause_menu_response = PAUSE_RESPONSE_RESUME_PRINT;  // Simulate menu selection
            #endif
            #if HAS_FILAMENT_SENSOR
@@ -32,9 +32,7 @@ typedef struct {
    timeout       = HOTEND_IDLE_TIMEOUT_SEC;
    trigger       = HOTEND_IDLE_MIN_TRIGGER;
    nozzle_target = HOTEND_IDLE_NOZZLE_TARGET;
-    #if HAS_HEATED_BED
-      bed_target  = HOTEND_IDLE_BED_TARGET;
-    #endif
+    bed_target    = HOTEND_IDLE_BED_TARGET;
  }
 } hotend_idle_settings_t;

@@ -130,7 +130,7 @@ public:
  }

  // Accessors
-  static uint16_t pixels() { return MUL_TERN(NEOPIXEL2_INSERIES, adaneo1.numPixels(), 2); }
+  static uint16_t pixels() { return adaneo1.numPixels() * TERN1(NEOPIXEL2_INSERIES, 2); }

  static uint32_t pixel_color(const uint16_t n) {
    #if ENABLED(NEOPIXEL2_INSERIES)
@@ -56,7 +56,7 @@ public:

  #if HAS_TEMP_HOTEND || HAS_HEATED_BED || HAS_HEATED_CHAMBER
    static void onHeatingDone()             { leds.set_white(); }
-    static void onPIDTuningDone(LEDColor c) { leds.set_color(c); }
+    static void onPidTuningDone(LEDColor c) { leds.set_color(c); }
  #endif

  #if HAS_MEDIA
@@ -72,26 +72,6 @@
  uint16_t CodeProfiler::call_count = 0;
 #endif

-#if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL
-  static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF;
-#else
-  #ifdef MAX7219_DEBUG_PLANNER_HEAD
-    static int16_t last_head_cnt = 0x1;
-  #endif
-  #ifdef MAX7219_DEBUG_PLANNER_TAIL
-    static int16_t last_tail_cnt = 0x1;
-  #endif
-#endif
-#ifdef MAX7219_DEBUG_PLANNER_QUEUE
-  static int16_t last_depth = 0;
-#endif
-#ifdef MAX7219_DEBUG_PROFILE
-  static uint8_t last_time_fraction = 0;
-#endif
-#ifdef MAX7219_DEBUG_MULTISTEPPING
-  static uint8_t last_multistepping = 0;
-#endif
-
 Max7219 max7219;

 uint8_t Max7219::led_line[MAX7219_LINES]; // = { 0 };
@@ -570,29 +550,6 @@ void Max7219::init() {
  #if MAX7219_INIT_TEST
    start_test_pattern();
  #endif
-
-  #ifdef MAX7219_REINIT_ON_POWERUP
-    #if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL
-      last_head_cnt = 0xF;
-      last_tail_cnt = 0xF;
-    #else
-      #ifdef MAX7219_DEBUG_PLANNER_HEAD
-        last_head_cnt = 0x1;
-      #endif
-      #ifdef MAX7219_DEBUG_PLANNER_TAIL
-        last_tail_cnt = 0x1;
-      #endif
-    #endif
-    #ifdef MAX7219_DEBUG_PLANNER_QUEUE
-      last_depth = 0;
-    #endif
-    #ifdef MAX7219_DEBUG_PROFILE
-      last_time_fraction = 0;
-    #endif
-    #ifdef MAX7219_DEBUG_MULTISTEPPING
-      last_multistepping = 0;
-    #endif
-  #endif
 }

 /**
@@ -719,6 +676,8 @@ void Max7219::idle_tasks() {

  #if defined(MAX7219_DEBUG_PLANNER_HEAD) && defined(MAX7219_DEBUG_PLANNER_TAIL) && MAX7219_DEBUG_PLANNER_HEAD == MAX7219_DEBUG_PLANNER_TAIL

+    static int16_t last_head_cnt = 0xF, last_tail_cnt = 0xF;
+
    if (last_head_cnt != head || last_tail_cnt != tail) {
      range16(MAX7219_DEBUG_PLANNER_HEAD, last_tail_cnt, tail, last_head_cnt, head, &row_change_mask);
      last_head_cnt = head;
@@ -728,6 +687,7 @@ void Max7219::idle_tasks() {
  #else

    #ifdef MAX7219_DEBUG_PLANNER_HEAD
+      static int16_t last_head_cnt = 0x1;
      if (last_head_cnt != head) {
        mark16(MAX7219_DEBUG_PLANNER_HEAD, last_head_cnt, head, &row_change_mask);
        last_head_cnt = head;
@@ -735,6 +695,7 @@ void Max7219::idle_tasks() {
    #endif

    #ifdef MAX7219_DEBUG_PLANNER_TAIL
+      static int16_t last_tail_cnt = 0x1;
      if (last_tail_cnt != tail) {
        mark16(MAX7219_DEBUG_PLANNER_TAIL, last_tail_cnt, tail, &row_change_mask);
        last_tail_cnt = tail;
@@ -753,6 +714,7 @@ void Max7219::idle_tasks() {
  #endif

  #ifdef MAX7219_DEBUG_PROFILE
+    static uint8_t last_time_fraction = 0;
    const uint8_t current_time_fraction = (uint16_t(CodeProfiler::get_time_fraction()) * MAX7219_NUMBER_UNITS + 8) / 16;
    if (current_time_fraction != last_time_fraction) {
      quantity(MAX7219_DEBUG_PROFILE, last_time_fraction, current_time_fraction, &row_change_mask);
@@ -23,8 +23,6 @@
 /**
 * feature/pause.cpp - Pause feature support functions
 * This may be combined with related G-codes if features are consolidated.
- *
- * Note: Calls to ui.pause_show_message are passed to either ExtUI or MarlinUI.
 */

 #include "../inc/MarlinConfigPre.h"
@@ -62,6 +60,8 @@

 #if ENABLED(EXTENSIBLE_UI)
  #include "../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../lcd/e3v2/proui/dwin.h"
 #endif

 #include "../lcd/marlinui.h"
@@ -148,7 +148,7 @@ static bool ensure_safe_temperature(const bool wait=true, const PauseMode mode=P
      thermalManager.setTargetHotend(thermalManager.extrude_min_temp, active_extruder);
  #endif

-  ui.pause_show_message(PAUSE_MESSAGE_HEATING, mode);
+  ui.pause_show_message(PAUSE_MESSAGE_HEATING, mode); UNUSED(mode);

  if (wait) return thermalManager.wait_for_hotend(active_extruder);

@@ -288,8 +288,8 @@ bool load_filament(const_float_t slow_load_length/*=0*/, const_float_t fast_load
          // Show "Purge More" / "Resume" menu and wait for reply
          KEEPALIVE_STATE(PAUSED_FOR_USER);
          wait_for_user = false;
-          #if ANY(HAS_MARLINUI_MENU, EXTENSIBLE_UI)
-            ui.pause_show_message(PAUSE_MESSAGE_OPTION); // MarlinUI and MKS UI also set PAUSE_RESPONSE_WAIT_FOR
+          #if ANY(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
+            ui.pause_show_message(PAUSE_MESSAGE_OPTION); // Also sets PAUSE_RESPONSE_WAIT_FOR
          #else
            pause_menu_response = PAUSE_RESPONSE_WAIT_FOR;
          #endif
@@ -52,12 +52,10 @@ enum PauseMessage : char {
  PAUSE_MESSAGE_RESUME,
  PAUSE_MESSAGE_HEAT,
  PAUSE_MESSAGE_HEATING,
-  PAUSE_MESSAGE_STATUS,
-  PAUSE_MESSAGE_COUNT
+  PAUSE_MESSAGE_STATUS
 };

 #if M600_PURGE_MORE_RESUMABLE
-  // Input methods can Purge More, Resume, or request input
  enum PauseMenuResponse : char {
    PAUSE_RESPONSE_WAIT_FOR,
    PAUSE_RESPONSE_EXTRUDE_MORE,
@@ -107,7 +105,7 @@ void wait_for_confirmation(
 void resume_print(
  const_float_t   slow_load_length=0,                         // (mm) Slow Load Length for finishing move
  const_float_t   fast_load_length=0,                         // (mm) Fast Load Length for initial move
-  const_float_t   purge_length=ADVANCED_PAUSE_PURGE_LENGTH,   // (mm) Purge length
+  const_float_t   extrude_length=ADVANCED_PAUSE_PURGE_LENGTH, // (mm) Purge length
  const int8_t    max_beep_count=0,                           // Beep alert for attention
  const celsius_t targetTemp=0                                // (°C) A target temperature for the hotend
  DXC_PARAMS                                                  // Dual-X-Carriage extruder index
@@ -116,7 +114,7 @@ void resume_print(
 bool load_filament(
  const_float_t   slow_load_length=0,                         // (mm) Slow Load Length for finishing move
  const_float_t   fast_load_length=0,                         // (mm) Fast Load Length for initial move
-  const_float_t   purge_length=0,                             // (mm) Purge length
+  const_float_t   extrude_length=0,                           // (mm) Purge length
  const int8_t    max_beep_count=0,                           // Beep alert for attention
  const bool      show_lcd=false,                             // Set LCD status messages?
  const bool      pause_for_user=false,                       // Pause for user before returning?
@@ -34,10 +34,6 @@
 #include "../module/temperature.h"
 #include "../MarlinCore.h"

-#if ENABLED(MAX7219_REINIT_ON_POWERUP)
-  #include "max7219.h"
-#endif
-
 #if ENABLED(PS_OFF_SOUND)
  #include "../libs/buzzer.h"
 #endif
@@ -64,10 +60,6 @@ bool Power::psu_on;
  millis_t Power::lastPowerOn;
 #endif

-#if PSU_TRACK_STATE_MS
-  millis_t Power::last_state_change_ms = 0;
-#endif
-
 /**
 * Initialize pins & state for the power manager.
 *
@@ -95,18 +87,9 @@ void Power::power_on() {
  #endif

  OUT_WRITE(PS_ON_PIN, PSU_ACTIVE_STATE);
-  #if ENABLED(PSU_OFF_REDUNDANT)
-    OUT_WRITE(PS_ON1_PIN, TERN_(PSU_OFF_REDUNDANT_INVERTED, !)PSU_ACTIVE_STATE);
-  #endif
-  TERN_(PSU_TRACK_STATE_MS, last_state_change_ms = millis());
-
  psu_on = true;
  safe_delay(PSU_POWERUP_DELAY);
-
  restore_stepper_drivers();
-
-  TERN_(MAX7219_REINIT_ON_POWERUP, max7219.init());
-
  TERN_(HAS_TRINAMIC_CONFIG, safe_delay(PSU_POWERUP_DELAY));

  #ifdef PSU_POWERUP_GCODE
@@ -134,11 +117,6 @@ void Power::power_off() {
  #endif

  OUT_WRITE(PS_ON_PIN, !PSU_ACTIVE_STATE);
-  #if ENABLED(PSU_OFF_REDUNDANT)
-    OUT_WRITE(PS_ON1_PIN, IF_DISABLED(PSU_OFF_REDUNDANT_INVERTED, !)PSU_ACTIVE_STATE);
-  #endif
-  TERN_(PSU_TRACK_STATE_MS, last_state_change_ms = millis());
-
  psu_on = false;

  #if ANY(POWER_OFF_TIMER, POWER_OFF_WAIT_FOR_COOLDOWN)
@@ -24,11 +24,8 @@
 /**
 * power.h - power control
 */
-#if PIN_EXISTS(PS_ON_EDM) || (PIN_EXISTS(PS_ON1_EDM) && ENABLED(PSU_OFF_REDUNDANT))
-  #define PSU_TRACK_STATE_MS 1
-#endif

-#if ANY(AUTO_POWER_CONTROL, POWER_OFF_TIMER, PSU_TRACK_STATE_MS)
+#if ANY(AUTO_POWER_CONTROL, POWER_OFF_TIMER)
  #include "../core/millis_t.h"
 #endif

@@ -40,10 +37,6 @@ class Power {
    static void power_on();
    static void power_off();

-    #if PSU_TRACK_STATE_MS
-      static millis_t last_state_change_ms;
-    #endif
-
    #if ANY(POWER_OFF_TIMER, POWER_OFF_WAIT_FOR_COOLDOWN)
      #if ENABLED(POWER_OFF_TIMER)
        static millis_t power_off_time;
@@ -48,8 +48,8 @@ uint8_t PrintJobRecovery::queue_index_r;
 uint32_t PrintJobRecovery::cmd_sdpos, // = 0
         PrintJobRecovery::sdpos[BUFSIZE];

-#if HAS_PLR_UI_FLAG
-  bool PrintJobRecovery::ui_flag_resume; // = false
+#if HAS_DWIN_E3V2_BASIC
+  bool PrintJobRecovery::dwin_flag; // = false
 #endif

 #include "../sd/cardreader.h"
@@ -151,8 +151,8 @@ class PrintJobRecovery {
    static uint32_t cmd_sdpos,        //!< SD position of the next command
                    sdpos[BUFSIZE];   //!< SD positions of queued commands

-    #if HAS_PLR_UI_FLAG
-      static bool ui_flag_resume;     //!< Flag the UI to show a dialog to Resume (M1000) or Cancel (M1000C)
+    #if HAS_DWIN_E3V2_BASIC
+      static bool dwin_flag;
    #endif

    static void init();
@@ -68,6 +68,8 @@ bool FilamentMonitorBase::enabled = true,

 #if ENABLED(EXTENSIBLE_UI)
  #include "../lcd/extui/ui_api.h"
+#elif ENABLED(DWIN_LCD_PROUI)
+  #include "../lcd/e3v2/proui/dwin.h"
 #endif

 void event_filament_runout(const uint8_t extruder) {
@@ -86,6 +88,7 @@ void event_filament_runout(const uint8_t extruder) {
  #endif

  TERN_(EXTENSIBLE_UI, ExtUI::onFilamentRunout(ExtUI::getTool(extruder)));
+  TERN_(DWIN_LCD_PROUI, dwinFilamentRunout(extruder));

  #if ANY(HOST_PROMPT_SUPPORT, HOST_ACTION_COMMANDS, MULTI_FILAMENT_SENSOR)
    const char tool = '0' + TERN0(MULTI_FILAMENT_SENSOR, extruder);
@@ -31,7 +31,7 @@ static uint32_t axis_plug_backward = 0;
 void stepper_driver_backward_error(FSTR_P const fstr) {
  SERIAL_ERROR_START();
  SERIAL_ECHOLN(fstr, F(" driver is backward!"));
-  ui.status_printf(2, F(S_FMT S_FMT), FTOP(fstr), GET_TEXT_F(MSG_DRIVER_BACKWARD));
+  ui.status_printf(2, F(S_FMT S_FMT), FTOP(fstr), GET_TEXT(MSG_DRIVER_BACKWARD));
 }

 void stepper_driver_backward_check() {
@@ -763,7 +763,7 @@
        SERIAL_CHAR('\t');
        st.printLabel();
        SERIAL_CHAR('\t');
-        print_hex_long(drv_status, ':', true);
+        print_hex_long(drv_status, ':');
        if (drv_status == 0xFFFFFFFF || drv_status == 0) SERIAL_ECHOPGM("\t Bad response!");
        SERIAL_EOL();
        break;
@@ -144,13 +144,15 @@ class TMCMarlin : public TMC, public TMCStorage<AXIS_LETTER, DRIVER_ID> {
      #endif
    #endif

-    void refresh_stepper_current() { rms_current(this->val_mA); }
+    #if ANY(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
+      void refresh_stepper_current() { rms_current(this->val_mA); }

-    #if ENABLED(HYBRID_THRESHOLD)
-      void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
-    #endif
-    #if USE_SENSORLESS
-      void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #if ENABLED(HYBRID_THRESHOLD)
+        void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
+      #endif
+      #if USE_SENSORLESS
+        void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #endif
    #endif

    static constexpr int8_t sgt_min = -64,
@@ -205,10 +207,12 @@ class TMCMarlin<TMC2208Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> : public TMC220
      }
    #endif

-    void refresh_stepper_current() { rms_current(this->val_mA); }
+    #if ANY(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
+      void refresh_stepper_current() { rms_current(this->val_mA); }

-    #if ENABLED(HYBRID_THRESHOLD)
-      void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
+      #if ENABLED(HYBRID_THRESHOLD)
+        void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
+      #endif
    #endif
 };

@@ -265,13 +269,15 @@ class TMCMarlin<TMC2209Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> : public TMC220
      }
    #endif

-    void refresh_stepper_current() { rms_current(this->val_mA); }
+    #if ANY(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
+      void refresh_stepper_current() { rms_current(this->val_mA); }

-    #if ENABLED(HYBRID_THRESHOLD)
-      void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
-    #endif
-    #if USE_SENSORLESS
-      void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #if ENABLED(HYBRID_THRESHOLD)
+        void refresh_hybrid_thrs() { set_pwm_thrs(this->stored.hybrid_thrs); }
+      #endif
+      #if USE_SENSORLESS
+        void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #endif
    #endif

    static constexpr uint8_t sgt_min = 0,
@@ -309,10 +315,12 @@ class TMCMarlin<TMC2660Stepper, AXIS_LETTER, DRIVER_ID, AXIS_ID> : public TMC266
      }
    #endif

-    void refresh_stepper_current() { rms_current(this->val_mA); }
+    #if ANY(HAS_MARLINUI_MENU, DWIN_LCD_PROUI)
+      void refresh_stepper_current() { rms_current(this->val_mA); }

-    #if USE_SENSORLESS
-      void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #if USE_SENSORLESS
+        void refresh_homing_thrs() { homing_threshold(this->stored.homing_thrs); }
+      #endif
    #endif

    static constexpr int8_t sgt_min = -64,
--- a/Show More
+++ b/Show More