Update MarlinCore.cpp

🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 (#26831 )
2024-04-10 15:12:02 -04:00 · 2024-04-07 19:33:27 -04:00 · 2024-04-07 12:05:35 -07:00 · 2024-04-07 10:49:36 -07:00 · 2024-04-07 09:37:37 -07:00 · 2024-04-07 08:52:35 -07:00
683 changed files with 20272 additions and 17390 deletions
@@ -1,40 +0,0 @@
-#
-# Configuration for Lock Threads - https://github.com/dessant/lock-threads-app
-#
-
-# Number of days of inactivity before a closed issue or pull request is locked
-daysUntilLock: 60
-
-# Skip issues and pull requests created before a given timestamp. Timestamp must
-# follow ISO 8601 (`YYYY-MM-DD`). Set to `false` to disable
-skipCreatedBefore: false
-
-# Issues and pull requests with these labels will be ignored. Set to `[]` to disable
-exemptLabels: [ 'no-locking' ]
-
-# Label to add before locking, such as `outdated`. Set to `false` to disable
-lockLabel: false
-
-# Comment to post before locking. Set to `false` to disable
-lockComment: >
-  This thread has been automatically locked since there has not been
-  any recent activity after it was closed. Please open a new issue for
-  related bugs.
-
-# Assign `resolved` as the reason for locking. Set to `false` to disable
-setLockReason: true
-
-# Limit to only `issues` or `pulls`
-# only: issues
-
-# Optionally, specify configuration settings just for `issues` or `pulls`
-# issues:
-#   exemptLabels:
-#     - help-wanted
-#   lockLabel: outdated
-
-# pulls:
-#   daysUntilLock: 30
-
-# Repository to extend settings from
-# _extends: repo
@@ -19,7 +19,7 @@ jobs:
    steps:

    - name: Check out bugfix-2.0.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
      with:
        ref: bugfix-2.0.x

@@ -39,7 +39,7 @@ jobs:
        exit 0

    - name: Check out bugfix-2.1.x
-      uses: actions/checkout@v3
+      uses: actions/checkout@v4
      with:
        ref: bugfix-2.1.x

@@ -32,7 +32,7 @@ jobs:
          - "Needs: Work"

    steps:
-      - uses: actions/checkout@v3
+      - uses: actions/checkout@v4
      - name: Remove Labels
        uses: actions-ecosystem/action-remove-labels@v1
        with:
@@ -17,7 +17,7 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-    - uses: actions/stale@v8
+    - uses: actions/stale@v9
      with:
        repo-token: ${{ secrets.GITHUB_TOKEN }}
        stale-issue-message: |
@@ -17,15 +17,15 @@ jobs:
    runs-on: ubuntu-latest

    steps:
-    - uses: dessant/lock-threads@v2
+    - uses: dessant/lock-threads@v5
      with:
        github-token: ${{ github.token }}
        process-only: 'issues'
-        issue-lock-inactive-days: '60'
-        issue-exclude-created-before: ''
-        issue-exclude-labels: 'no-locking'
-        issue-lock-labels: ''
-        issue-lock-comment: >
+        issue-inactive-days: '60'
+        exclude-issue-created-before: ''
+        exclude-any-issue-labels: 'no-locking'
+        add-issue-labels: ''
+        issue-comment: >
          This issue has been automatically locked since there
          has not been any recent activity after it was closed.
          Please open a new issue for related bugs.
@@ -152,7 +152,7 @@ jobs:
      uses: actions/checkout@v4

    - name: Cache pip
-      uses: actions/cache@v3
+      uses: actions/cache@v4
      with:
        path: ~/.cache/pip
        key: ${{ runner.os }}-pip-${{ hashFiles('**/requirements.txt') }}
@@ -160,13 +160,13 @@ jobs:
          ${{ runner.os }}-pip-

    - name: Cache PlatformIO
-      uses: actions/cache@v3
+      uses: actions/cache@v4
      with:
        path: ~/.platformio
        key: ${{ runner.os }}-${{ hashFiles('**/lockfiles') }}

    - name: Select Python 3.9
-      uses: actions/setup-python@v4
+      uses: actions/setup-python@v5
      with:
        python-version: '3.9'
        architecture: 'x64'
@@ -5,13 +5,14 @@ CONTAINER_IMAGE := marlin-dev

 help:
 	@echo "Tasks for local development:"
-	@echo "* format-pins:                 Reformat all pins files"
-	@echo "* tests-single-ci:             Run a single test from inside the CI"
-	@echo "* tests-single-local:          Run a single test locally"
-	@echo "* tests-single-local-docker:   Run a single test locally, using docker"
-	@echo "* tests-all-local:             Run all tests locally"
-	@echo "* tests-all-local-docker:      Run all tests locally, using docker"
-	@echo "* setup-local-docker:          Build the local docker image"
+	@echo "make marlin                    : Build marlin for the configured board"
+	@echo "make format-pins               : Reformat all pins files"
+	@echo "make tests-single-ci           : Run a single test from inside the CI"
+	@echo "make tests-single-local        : Run a single test locally"
+	@echo "make tests-single-local-docker : Run a single test locally, using docker"
+	@echo "make tests-all-local           : Run all tests locally"
+	@echo "make tests-all-local-docker    : Run all tests locally, using docker"
+	@echo "make setup-local-docker        : Build the local docker image"
 	@echo ""
 	@echo "Options for testing:"
 	@echo "  TEST_TARGET          Set when running tests-single-*, to select the"
@@ -24,46 +25,41 @@ help:
 	@echo "  VERBOSE_PLATFORMIO   If you want the full PIO output, set any value"
 	@echo "  GIT_RESET_HARD       Used by CI: reset all local changes. WARNING:"
 	@echo "                       THIS WILL UNDO ANY CHANGES YOU'VE MADE!"
-.PHONY: help
+
+marlin:
+	./buildroot/bin/mftest -a
+.PHONY: marlin

 tests-single-ci:
 	export GIT_RESET_HARD=true
 	$(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) PLATFORMIO_BUILD_FLAGS=-DGITHUB_ACTION
-.PHONY: tests-single-ci

 tests-single-local:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local" ; return 1; fi
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && run_tests . $(TEST_TARGET) "$(ONLY_TEST)"
-.PHONY: tests-single-local

 tests-single-local-docker:
 	@if ! test -n "$(TEST_TARGET)" ; then echo "***ERROR*** Set TEST_TARGET=<your-module> or use make tests-all-local-docker" ; return 1; fi
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-single-local TEST_TARGET=$(TEST_TARGET) VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD) ONLY_TEST="$(ONLY_TEST)"
-.PHONY: tests-single-local-docker

 tests-all-local:
 	export PATH="./buildroot/bin/:./buildroot/tests/:${PATH}" \
 	  && export VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) \
 	  && for TEST_TARGET in $$($(SCRIPTS_DIR)/get_test_targets.py) ; do echo "Running tests for $$TEST_TARGET" ; run_tests . $$TEST_TARGET ; done
-.PHONY: tests-all-local

 tests-all-local-docker:
 	@if ! $(CONTAINER_RT_BIN) images -q $(CONTAINER_IMAGE) > /dev/null ; then $(MAKE) setup-local-docker ; fi
 	$(CONTAINER_RT_BIN) run $(CONTAINER_RT_OPTS) $(CONTAINER_IMAGE) $(MAKE) tests-all-local VERBOSE_PLATFORMIO=$(VERBOSE_PLATFORMIO) GIT_RESET_HARD=$(GIT_RESET_HARD)
-.PHONY: tests-all-local-docker

 setup-local-docker:
 	$(CONTAINER_RT_BIN) build -t $(CONTAINER_IMAGE) -f docker/Dockerfile .
-.PHONY: setup-local-docker

 PINS := $(shell find Marlin/src/pins -mindepth 2 -name '*.h')

-.PHONY: $(PINS)
-
 $(PINS): %:
-	@echo "Formatting $@" && node buildroot/share/scripts/pinsformat.js $@
+	@echo "Formatting $@" && node $(SCRIPTS_DIR)/pinsformat.js $@

 format-pins: $(PINS)
@@ -135,9 +135,9 @@
 * Options: A4988, A5984, DRV8825, LV8729, TB6560, TB6600, TMC2100,
 *          TMC2130, TMC2130_STANDALONE, TMC2160, TMC2160_STANDALONE,
 *          TMC2208, TMC2208_STANDALONE, TMC2209, TMC2209_STANDALONE,
- *          TMC26X,  TMC26X_STANDALONE,  TMC2660, TMC2660_STANDALONE,
- *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
- * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
+ *          TMC2660, TMC2660_STANDALONE, TMC5130, TMC5130_STANDALONE,
+ *          TMC5160, TMC5160_STANDALONE
+ * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
 */
 #define X_DRIVER_TYPE  A4988
 #define Y_DRIVER_TYPE  A4988
@@ -401,9 +401,18 @@
  //#define PS_OFF_SOUND            // Beep 1s when power off
  #define PSU_ACTIVE_STATE LOW      // Set 'LOW' for ATX, 'HIGH' for X-Box

-  //#define PSU_DEFAULT_OFF               // Keep power off until enabled directly with M80
-  //#define PSU_POWERUP_DELAY      250    // (ms) Delay for the PSU to warm up to full power
-  //#define LED_POWEROFF_TIMEOUT 10000    // (ms) Turn off LEDs after power-off, with this amount of delay
+  //#define PSU_DEFAULT_OFF             // Keep power off until enabled directly with M80
+  //#define PSU_POWERUP_DELAY      250  // (ms) Delay for the PSU to warm up to full power
+  //#define LED_POWEROFF_TIMEOUT 10000  // (ms) Turn off LEDs after power-off, with this amount of delay
+
+  //#define PSU_OFF_REDUNDANT           // Second pin for redundant power control
+  //#define PSU_OFF_REDUNDANT_INVERTED  // Redundant pin state is the inverse of PSU_ACTIVE_STATE
+
+  //#define PS_ON1_PIN               6  // Redundant pin required to enable power in combination with PS_ON_PIN
+
+  //#define PS_ON_EDM_PIN            8  // External Device Monitoring pins for external power control relay feedback. Fault on mismatch.
+  //#define PS_ON1_EDM_PIN           9
+  #define PS_EDM_RESPONSE          250  // (ms) Time to allow for relay action

  //#define POWER_OFF_TIMER               // Enable M81 D<seconds> to power off after a delay
  //#define POWER_OFF_WAIT_FOR_COOLDOWN   // Enable M81 S to power off only after cooldown
@@ -1006,9 +1015,6 @@
    // Radius around the center where the arm cannot reach
    #define MIDDLE_DEAD_ZONE_R   0  // (mm)

-    #define THETA_HOMING_OFFSET  0  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
-    #define PSI_HOMING_OFFSET    0  // Calculated from Calibration Guide and M364 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
-
  #elif ENABLED(MP_SCARA)

    #define SCARA_OFFSET_THETA1  12 // degrees
@@ -1027,23 +1033,19 @@
  #define DEFAULT_SEGMENTS_PER_SECOND 200

  // Length of inner and outer support arms. Measure arm lengths precisely.
-  #define TPARA_LINKAGE_1 120       // (mm)
-  #define TPARA_LINKAGE_2 120       // (mm)
+  #define TPARA_LINKAGE_1 120     // (mm)
+  #define TPARA_LINKAGE_2 120     // (mm)

-  // SCARA tower offset (position of Tower relative to bed zero position)
-  // This needs to be reasonably accurate as it defines the printbed position in the SCARA space.
-  #define TPARA_OFFSET_X    0       // (mm)
-  #define TPARA_OFFSET_Y    0       // (mm)
-  #define TPARA_OFFSET_Z    0       // (mm)
+  // TPARA tower offset (position of Tower relative to bed zero position)
+  // This needs to be reasonably accurate as it defines the printbed position in the TPARA space.
+  #define TPARA_OFFSET_X    0     // (mm)
+  #define TPARA_OFFSET_Y    0     // (mm)
+  #define TPARA_OFFSET_Z    0     // (mm)

  #define FEEDRATE_SCALING        // Convert XY feedrate from mm/s to degrees/s on the fly

  // Radius around the center where the arm cannot reach
  #define MIDDLE_DEAD_ZONE_R   0  // (mm)
-
-  // Calculated from Calibration Guide and M360 / M114. See https://www.morgan3dp.com/morgan-calibration-guide/
-  #define THETA_HOMING_OFFSET  0
-  #define PSI_HOMING_OFFSET    0
 #endif

 // @section polar
@@ -1231,11 +1233,16 @@

 /**
 * Default Axis Steps Per Unit (linear=steps/mm, rotational=steps/°)
- * Override with M92
+ * Override with M92 (when enabled below)
 *                                      X, Y, Z [, I [, J [, K...]]], E0 [, E1[, E2...]]
 */
 #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, 500 }

+/**
+ * Enable support for M92. Disable to save at least ~530 bytes of flash.
+ */
+#define EDITABLE_STEPS_PER_UNIT
+
 /**
 * Default Max Feed Rate (linear=mm/s, rotational=°/s)
 * Override with M203
@@ -1286,6 +1293,7 @@
  #define DEFAULT_XJERK 10.0
  #define DEFAULT_YJERK 10.0
  #define DEFAULT_ZJERK  0.3
+  #define DEFAULT_EJERK  5.0
  //#define DEFAULT_IJERK  0.3
  //#define DEFAULT_JJERK  0.3
  //#define DEFAULT_KJERK  0.3
@@ -1301,8 +1309,6 @@
  #endif
 #endif

-#define DEFAULT_EJERK    5.0  // May be used by Linear Advance
-
 /**
 * Junction Deviation Factor
 *
@@ -1442,6 +1448,17 @@
  //#define BD_SENSOR_PROBE_NO_STOP // Probe bed without stopping at each probe point
 #endif

+/**
+ * BIQU MicroProbe
+ *
+ * A lightweight, solenoid-driven probe.
+ * For information about this sensor https://github.com/bigtreetech/MicroProbe
+ *
+ * Also requires: PROBE_ENABLE_DISABLE
+ */
+//#define BIQU_MICROPROBE_V1  // Triggers HIGH
+//#define BIQU_MICROPROBE_V2  // Triggers LOW
+
 // A probe that is deployed and stowed with a solenoid pin (SOL1_PIN)
 //#define SOLENOID_PROBE

@@ -2619,9 +2636,9 @@
 #define DISPLAY_CHARSET_HD44780 JAPANESE

 /**
- * Info Screen Style (0:Classic, 1:Průša)
+ * Info Screen Style (0:Classic, 1:Průša, 2:CNC)
 *
- * :[0:'Classic', 1:'Průša']
+ * :[0:'Classic', 1:'Průša', 2:'CNC']
 */
 #define LCD_INFO_SCREEN_STYLE 0

@@ -3022,7 +3039,7 @@

 //
 // Factory display for Creality CR-10 / CR-7 / Ender-3
-// https://www.aliexpress.com/item/32833148327.html
+// https://marlinfw.org/docs/hardware/controllers.html#cr10_stockdisplay
 //
 // Connect to EXP1 on RAMPS and compatible boards.
 //
@@ -3399,7 +3416,6 @@
  #define BUTTON_DELAY_MENU     250 // (ms) Button repeat delay for menus

  //#define DISABLE_ENCODER         // Disable the click encoder, if any
-  //#define TOUCH_IDLE_SLEEP_MINS 5 // (minutes) Display Sleep after a period of inactivity. Set with M255 S.

  #define TOUCH_SCREEN_CALIBRATION

@@ -459,7 +459,7 @@
      #define PID_FAN_SCALING_LIN_FACTOR (PID_FAN_SCALING_AT_FULL_SPEED-DEFAULT_Kf)/255.0

    #else
-      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power loss due to cooling = Kf * (fan_speed)
+      #define PID_FAN_SCALING_LIN_FACTOR (0)             // Power-loss due to cooling = Kf * (fan_speed)
      #define DEFAULT_Kf 10                              // A constant value added to the PID-tuner
      #define PID_FAN_SCALING_MIN_SPEED 10               // Minimum fan speed at which to enable PID_FAN_SCALING
    #endif
@@ -1204,14 +1204,14 @@
 //#define INPUT_SHAPING_Y
 #if ANY(INPUT_SHAPING_X, INPUT_SHAPING_Y)
  #if ENABLED(INPUT_SHAPING_X)
-    #define SHAPING_FREQ_X  40          // (Hz) The default dominant resonant frequency on the X axis.
-    #define SHAPING_ZETA_X  0.15f       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
+    #define SHAPING_FREQ_X  40.0        // (Hz) The default dominant resonant frequency on the X axis.
+    #define SHAPING_ZETA_X   0.15       // Damping ratio of the X axis (range: 0.0 = no damping to 1.0 = critical damping).
  #endif
  #if ENABLED(INPUT_SHAPING_Y)
-    #define SHAPING_FREQ_Y  40          // (Hz) The default dominant resonant frequency on the Y axis.
-    #define SHAPING_ZETA_Y  0.15f       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
+    #define SHAPING_FREQ_Y  40.0        // (Hz) The default dominant resonant frequency on the Y axis.
+    #define SHAPING_ZETA_Y   0.15       // Damping ratio of the Y axis (range: 0.0 = no damping to 1.0 = critical damping).
  #endif
-  //#define SHAPING_MIN_FREQ  20        // By default the minimum of the shaping frequencies. Override to affect SRAM usage.
+  //#define SHAPING_MIN_FREQ  20.0      // (Hz) By default the minimum of the shaping frequencies. Override to affect SRAM usage.
  //#define SHAPING_MAX_STEPRATE 10000  // By default the maximum total step rate of the shaped axes. Override to affect SRAM usage.
  //#define SHAPING_MENU                // Add a menu to the LCD to set shaping parameters.
 #endif
@@ -1270,11 +1270,11 @@
 * XY Frequency limit
 * Reduce resonance by limiting the frequency of small zigzag infill moves.
 * See https://hydraraptor.blogspot.com/2010/12/frequency-limit.html
- * Use M201 F<freq> G<min%> to change limits at runtime.
+ * Use M201 F<freq> S<min%> to change limits at runtime.
 */
 //#define XY_FREQUENCY_LIMIT      10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
 #ifdef XY_FREQUENCY_LIMIT
-  #define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 G<min%>.
+  #define XY_FREQUENCY_MIN_PERCENT 5 // (%) Minimum FR percentage to apply. Set with M201 S<min%>.
 #endif

 //
@@ -1474,6 +1474,7 @@
  #if IS_ULTIPANEL
    #define MANUAL_E_MOVES_RELATIVE // Display extruder move distance rather than "position"
    #define ULTIPANEL_FEEDMULTIPLY  // Encoder sets the feedrate multiplier on the Status Screen
+    //#define ULTIPANEL_FLOWPERCENT // Encoder sets the flow percentage on the Status Screen
  #endif
 #endif

@@ -1539,6 +1540,7 @@
   * Axis moves <= 1/2 the axis length and Extruder moves <= EXTRUDE_MAXLENGTH
   * will be shown in the move submenus.
   */
+
  #define MANUAL_MOVE_DISTANCE_MM                    10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM         100, 50, 10, 1.0, 0.1  // (mm)
  //#define MANUAL_MOVE_DISTANCE_MM    500, 100, 50, 10, 1.0, 0.1  // (mm)
@@ -1743,19 +1745,25 @@
   */
  //#define POWER_LOSS_RECOVERY
  #if ENABLED(POWER_LOSS_RECOVERY)
-    #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
-    //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
-    //#define POWER_LOSS_ZRAISE       2 // (mm) Z axis raise on resume (on power loss with UPS)
-    //#define POWER_LOSS_PIN         44 // Pin to detect power loss. Set to -1 to disable default pin on boards without module.
-    //#define POWER_LOSS_STATE     HIGH // State of pin indicating power loss
-    //#define POWER_LOSS_PULLUP         // Set pullup / pulldown as appropriate for your sensor
+    #define PLR_ENABLED_DEFAULT       false // Power-Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
+    //#define PLR_BED_THRESHOLD BED_MAXTEMP // (°C) Skip user confirmation at or above this bed temperature (0 to disable)
+
+    //#define POWER_LOSS_PIN             44 // Pin to detect power-loss. Set to -1 to disable default pin on boards without module, or comment to use board default.
+    //#define POWER_LOSS_STATE         HIGH // State of pin indicating power-loss
+    //#define POWER_LOSS_PULLUP             // Set pullup / pulldown as appropriate for your sensor
    //#define POWER_LOSS_PULLDOWN
-    //#define POWER_LOSS_PURGE_LEN   20 // (mm) Length of filament to purge on resume
-    //#define POWER_LOSS_RETRACT_LEN 10 // (mm) Length of filament to retract on fail. Requires backup power.
+
+    //#define POWER_LOSS_ZRAISE        2    // (mm) Z axis raise on resume (on power-loss with UPS)
+    //#define POWER_LOSS_PURGE_LEN    20    // (mm) Length of filament to purge on resume

    // Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
    // especially with "vase mode" printing. Set too high and vases cannot be continued.
-    #define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
+    #define POWER_LOSS_MIN_Z_CHANGE    0.05 // (mm) Minimum Z change before saving power-loss data
+
+    //#define BACKUP_POWER_SUPPLY           // Backup power / UPS to move the steppers on power-loss
+    #if ENABLED(BACKUP_POWER_SUPPLY)
+      //#define POWER_LOSS_RETRACT_LEN   10 // (mm) Length of filament to retract on fail
+    #endif

    // Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
    //#define POWER_LOSS_RECOVER_ZHOME
@@ -1962,17 +1970,6 @@
  // Western only. Not available for Cyrillic, Kana, Turkish, Greek, or Chinese.
  //#define USE_SMALL_INFOFONT

-  /**
-   * Graphical Display Sleep
-   *
-   * The U8G library provides sleep / wake functions for SH1106, SSD1306,
-   * SSD1309, and some other DOGM displays.
-   * Enable this option to save energy and prevent OLED pixel burn-in.
-   * Adds the menu item Configuration > LCD Timeout (m) to set a wait period
-   * from 0 (disabled) to 99 minutes.
-   */
-  //#define DISPLAY_SLEEP_MINUTES 2  // (minutes) Timeout before turning off the screen. Set with M255 S.
-
  /**
   * ST7920-based LCDs can emulate a 16 x 4 character display using
   * the ST7920 character-generator for very fast screen updates.
@@ -2221,13 +2218,20 @@
  //#define TFT_BTOKMENU_COLOR 0x145F // 00010 100010 11111 Cyan
 #endif

-//
-// LCD Backlight Timeout
-// Requires a display with a controllable backlight
-//
+/**
+ * Display Sleep
+ * Enable this option to save energy and prevent OLED pixel burn-in.
+ */
+//#define DISPLAY_SLEEP_MINUTES 2       // (minutes) Timeout before turning off the screen
+
+/**
+ * LCD Backlight Timeout
+ * Requires a display with a controllable backlight
+ */
 //#define LCD_BACKLIGHT_TIMEOUT_MINS 1  // (minutes) Timeout before turning off the backlight
+
 #if defined(DISPLAY_SLEEP_MINUTES) || defined(LCD_BACKLIGHT_TIMEOUT_MINS)
-  #define EDITABLE_DISPLAY_TIMEOUT      // Edit timeout with M255 S<minutes> and a menu item
+  #define EDITABLE_DISPLAY_TIMEOUT      // Edit sleep / backlight timeout with M255 S<minutes> and a menu item
 #endif

 //
@@ -2318,7 +2322,6 @@
  #endif
  //#define ADVANCE_K_EXTRA       // Add a second linear advance constant, configurable with M900 L.
  //#define LA_DEBUG              // Print debug information to serial during operation. Disable for production use.
-  //#define ALLOW_LOW_EJERK       // Allow a DEFAULT_EJERK value of <10. Recommended for direct drive hotends.
  //#define EXPERIMENTAL_I2S_LA   // Allow I2S_STEPPER_STREAM to be used with LA. Performance degrades as the LA step rate reaches ~20kHz.
 #endif

@@ -2950,15 +2953,12 @@
 *    Some boards have simple jumper connections! See your board's documentation.
 *  - These drivers can also be used with Hardware Serial.
 *
- * The TMC26XStepper library is required for TMC26X stepper drivers.
- *   https://github.com/MarlinFirmware/TMC26XStepper
- *
 * The TMCStepper library is required for other TMC stepper drivers.
 *   https://github.com/teemuatlut/TMCStepper
 *
 * @section tmc/config
 */
-#if HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#if HAS_TRINAMIC_CONFIG

  #define HOLD_MULTIPLIER    0.5  // Scales down the holding current from run current

@@ -2972,7 +2972,7 @@
    #define X_CURRENT       800        // (mA) RMS current. Multiply by 1.414 for peak current.
    #define X_CURRENT_HOME  X_CURRENT  // (mA) RMS current for sensorless homing
    #define X_MICROSTEPS     16        // 0..256
-    #define X_RSENSE          0.11     // Multiplied x1000 for TMC26X
+    #define X_RSENSE          0.11
    #define X_CHAIN_POS      -1        // -1..0: Not chained. 1: MCU MOSI connected. 2: Next in chain, ...
    //#define X_INTERPOLATE  true      // Enable to override 'INTERPOLATE' for the X axis
    //#define X_HOLD_MULTIPLIER 0.5    // Enable to override 'HOLD_MULTIPLIER' for the X axis
@@ -3465,7 +3465,7 @@
   */
  #define TMC_ADV() {  }

-#endif // HAS_TRINAMIC_CONFIG || HAS_TMC26X
+#endif // HAS_TRINAMIC_CONFIG

 // @section i2cbus

@@ -3558,7 +3558,7 @@
 * Add the M3, M4, and M5 commands to turn the spindle/laser on and off, and
 * to set spindle speed, spindle direction, and laser power.
 *
- * SuperPid is a router/spindle speed controller used in the CNC milling community.
+ * SuperPID is a router/spindle speed controller used in the CNC milling community.
 * Marlin can be used to turn the spindle on and off. It can also be used to set
 * the spindle speed from 5,000 to 30,000 RPM.
 *
@@ -4308,6 +4308,7 @@
                                          // See class CodeProfiler.
  //#define MAX7219_DEBUG_MULTISTEPPING 6 // Show multi-stepping 1 to 128 on this LED matrix row.
  //#define MAX7219_DEBUG_SLOWDOWN      6 // Count (mod 16) how many times SLOWDOWN has reduced print speed.
+  //#define MAX7219_REINIT_ON_POWERUP     // Re-initialize MAX7129 when power supply turns on
 #endif

 /**
@@ -4524,3 +4525,6 @@

 // Report uncleaned reset reason from register r2 instead of MCUSR. Supported by Optiboot on AVR.
 //#define OPTIBOOT_RESET_REASON
+
+// Shrink the build for smaller boards by sacrificing some serial feedback
+//#define MARLIN_SMALL_BUILD
@@ -2,7 +2,7 @@

  Marlin Firmware

-  (c) 2011-2023 MarlinFirmware
+  (c) 2011-2024 MarlinFirmware
  Portions of Marlin are (c) by their respective authors.
  All code complies with GPLv2 and/or GPLv3

@@ -41,7 +41,7 @@
 * here we define this default string as the date where the latest release
 * version was tagged.
 */
-//#define STRING_DISTRIBUTION_DATE "2024-01-09"
+//#define STRING_DISTRIBUTION_DATE "2024-04-07"

 /**
 * Defines a generic printer name to be output to the LCD after booting Marlin.
@@ -81,6 +81,12 @@ void MarlinHAL::init() {
  #if HAS_SERVO_3
    OUT_WRITE(SERVO3_PIN, LOW);
  #endif
+  #if HAS_SERVO_4
+    OUT_WRITE(SERVO4_PIN, LOW);
+  #endif
+  #if HAS_SERVO_5
+    OUT_WRITE(SERVO5_PIN, LOW);
+  #endif

  init_pwm_timers();   // Init user timers to default frequency - 1000HZ

@@ -119,7 +119,6 @@ void spiBegin() {
    while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
  }

-
  /** begin spi transaction */
  void spiBeginTransaction(uint32_t spiClock, uint8_t bitOrder, uint8_t dataMode) {
    // Based on Arduino SPI library
@@ -175,7 +174,6 @@ void spiBegin() {
    SPSR = clockDiv | 0x01;
  }

-
 #else // SOFTWARE_SPI || FORCE_SOFT_SPI

  // ------------------------
@@ -63,7 +63,6 @@

 static volatile int8_t Channel[_Nbr_16timers];              // counter for the servo being pulsed for each timer (or -1 if refresh interval)

-
 /************ static functions common to all instances ***********************/

 static inline void handle_interrupts(const timer16_Sequence_t timer, volatile uint16_t* TCNTn, volatile uint16_t* OCRnA) {
@@ -35,14 +35,14 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
@@ -61,7 +61,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -91,7 +91,6 @@ void endstop_ISR() { endstops.update(); }

 #endif

-
 // Install Pin change interrupt for a pin. Can be called multiple times.
 void pciSetup(const int8_t pin) {
  if (digitalPinHasPCICR(pin)) {
@@ -679,7 +679,6 @@
 #define PF7_PWM     0
 #define PF7_DDR     DDRF

-
 /**
 * Some of the pin mapping functions of the Teensduino extension to the Arduino IDE
 * do not function the same as the other Arduino extensions.
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -163,7 +163,6 @@ bool pwm_status(uint8_t pin) {
  SERIAL_ECHO_SP(2);
 } // pwm_status

-
 const volatile uint8_t* const PWM_other[][3] PROGMEM = {
    { &TCCR0A, &TCCR0B, &TIMSK0 },
    { &TCCR1A, &TCCR1B, &TIMSK1 },
@@ -181,7 +180,6 @@ const volatile uint8_t* const PWM_other[][3] PROGMEM = {
  #endif
 };

-
 const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {

  #ifdef TIMER0A
@@ -217,7 +215,6 @@ const volatile uint8_t* const PWM_OCR[][3] PROGMEM = {
  #endif
 };

-
 #define TCCR_A(T)   pgm_read_word(&PWM_other[T][0])
 #define TCCR_B(T)   pgm_read_word(&PWM_other[T][1])
 #define TIMSK(T)    pgm_read_word(&PWM_other[T][2])
@@ -120,7 +120,6 @@ void u8g_spiSend_sw_AVR_mode_3(uint8_t val) {
  U8G_ATOMIC_END();
 }

-
 #if ENABLED(FYSETC_MINI_12864)
  #define SPISEND_SW_AVR u8g_spiSend_sw_AVR_mode_3
 #else
@@ -42,7 +42,7 @@
 // Public functions
 // ------------------------

-#if ANY(DUE_SOFTWARE_SPI, FORCE_SOFT_SPI)
+#if ANY(SOFTWARE_SPI, FORCE_SOFT_SPI)

  // ------------------------
  // Software SPI
@@ -474,7 +474,6 @@ void MarlinSerial<Cfg>::flushTX() {
  }
 }

-
 // If not using the USB port as serial port
 #if defined(SERIAL_PORT) && SERIAL_PORT >= 0
  template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
@@ -958,14 +958,14 @@ static void ee_Init() {
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { ee_Init();  return true; }
 bool PersistentStore::access_finish() { ee_Flush(); return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      ee_Write(uint32_t(p), v);
@@ -984,7 +984,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = ee_Read(uint32_t(pos));
+    uint8_t c = ee_Read(uint32_t(REAL_EEPROM_ADDR(pos)));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -36,14 +36,14 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  uint16_t written = 0;
  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
@@ -62,7 +62,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -49,7 +49,6 @@ extern volatile uint32_t *SODR_A, *SODR_B, *CODR_A, *CODR_B;

 #define PWM_MAP_INIT_ROW(IO,ZZ) { ZZ == 'A' ? SODR_A : SODR_B,  ZZ == 'A' ? CODR_A : CODR_B, 1 << _PIN(IO) }

-
 #define PWM_MAP_INIT {  PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_X_PIN, 'B'), \
                        PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Y_PIN, 'B'), \
                        PWM_MAP_INIT_ROW(MOTOR_CURRENT_PWM_Z_PIN, 'B'), \
@@ -168,7 +168,6 @@ const G2_PinDescription G2_g_APinDescription[] = {
  { PIOB, PIO_PB21,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 52
  { PIOB, PIO_PB14,          ID_PIOB, PIO_OUTPUT_0, PIO_DEFAULT, PIN_ATTR_DIGITAL,                  NO_ADC, NO_ADC, NOT_ON_PWM,  NOT_ON_TIMER }, // PIN 53

-
  // 54 .. 65 - Analog pins
  // ----------------------
  { PIOA, PIO_PA16X1_AD7,    ID_PIOA, PIO_INPUT,    PIO_DEFAULT, PIN_ATTR_ANALOG,                   ADC0,   ADC7,   NOT_ON_PWM,  NOT_ON_TIMER }, // AD0
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -72,10 +72,10 @@

 #if HAS_MEDIA && HAS_DRIVER(TMC2130)
  #if ENABLED(TMC_USE_SW_SPI)
-    #if DISABLED(DUE_SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
+    #if DISABLED(SOFTWARE_SPI) && (_IS_HW_SPI(MOSI) || _IS_HW_SPI(MISO) || _IS_HW_SPI(SCK))
      #error "DUE hardware SPI is required but is incompatible with TMC2130 software SPI. Either disable TMC_USE_SW_SPI or use separate pins for the two SPIs."
    #endif
-  #elif ENABLED(DUE_SOFTWARE_SPI)
+  #elif ENABLED(SOFTWARE_SPI)
    #error "DUE software SPI is required but is incompatible with TMC2130 hardware SPI. Enable TMC_USE_SW_SPI to fix."
  #endif
 #endif
@@ -48,7 +48,7 @@
  #define SD_MOSI_PIN       75
 #else
  // defaults
-  #define DUE_SOFTWARE_SPI
+  #define SOFTWARE_SPI
  #ifndef SD_SCK_PIN
    #define SD_SCK_PIN      52
  #endif
@@ -142,7 +142,6 @@
 */
 #define COMPILER_PACK_RESET()          COMPILER_PRAGMA(pack())

-
 /**
 * \brief Set aligned boundary.
 */
@@ -283,7 +282,6 @@ typedef double                  F64;  //!< 64-bit floating-point number.
 typedef uint32_t                iram_size_t;
 //! @}

-
 /*! \name Status Types
 */
 //! @{
@@ -291,7 +289,6 @@ typedef bool                Status_bool_t;  //!< Boolean status.
 typedef U8                  Status_t;       //!< 8-bit-coded status.
 //! @}

-
 /*! \name Aliasing Aggregate Types
 */
 //! @{
@@ -462,7 +459,6 @@ typedef struct
 #endif
 //! @}

-
 #ifndef __ASSEMBLY__ // not for assembling.

 //! \name Optimization Control
@@ -581,7 +577,6 @@ typedef struct

 //! @}

-
 /*! \name Zero-Bit Counting
 *
 * Under GCC, __builtin_clz and __builtin_ctz behave like macros when
@@ -692,7 +687,6 @@ typedef struct

 //! @}

-
 /*! \name Bit Reversing
 */
 //! @{
@@ -732,7 +726,6 @@ typedef struct

 //! @}

-
 /*! \name Alignment
 */
 //! @{
@@ -798,7 +791,6 @@ typedef struct
 */
 #define Long_call(addr)                   ((*(void (*)(void))(addr))())

-
 /*! \name MCU Endianism Handling
 * ARM is MCU little endianism.
 */
@@ -868,7 +860,6 @@ typedef struct
 #define  CPU_TO_BE32(x) swap32(x)
 //! @}

-
 /*! \name Endianism Conversion
 *
 * The same considerations as for clz and ctz apply here but GCC's
@@ -955,7 +946,6 @@ typedef struct

 //! @}

-
 /*! \name Target Abstraction
 */
 //! @{
@@ -997,7 +987,6 @@ typedef U8                  Byte;       //!< 8-bit unsigned integer.

 #endif  // #ifndef __ASSEMBLY__

-
 #ifdef __ICCARM__
 #define SHORTENUM           __packed
 #elif defined(__GNUC__)
@@ -81,7 +81,6 @@
 #define LUN_0_NAME                              "\"SD/MMC Card\""
 //! @}

-
 /*! \name Actions Associated with Memory Accesses
 *
 * Write here the action to associate with each memory access.
@@ -112,5 +111,4 @@
 #define GLOBAL_WR_PROTECT    false   //!< Management of a global write protection.
 //! @}

-
 #endif // _CONF_ACCESS_H_
@@ -96,5 +96,4 @@
 // - UPLL frequency: 480MHz
 // - USB clock: 480 / 1 = 480MHz

-
 #endif /* CONF_CLOCK_H_INCLUDED */
@@ -88,7 +88,6 @@
 #endif
 //@}

-
 /**
 * USB Device Callbacks definitions (Optional)
 * @{
@@ -150,7 +149,6 @@

 //@}

-
 /**
 * USB Interface Configuration
 * @{
@@ -210,7 +208,6 @@
  //@}
  //@}

-
  /**
   * Configuration of MSC interface
   * @{
@@ -245,7 +242,6 @@

  //@}

-
  /**
   * Description of Composite Device
   * @{
@@ -68,7 +68,6 @@
 #endif
 #include "ctrl_access.h"

-
 //_____ D E F I N I T I O N S ______________________________________________

 #ifdef FREERTOS_USED
@@ -112,7 +111,6 @@ static xSemaphoreHandle ctrl_access_semphr = NULL;

 #endif  // FREERTOS_USED

-
 #if MAX_LUN

 /*! \brief Initializes an entry of the LUN descriptor table.
@@ -242,17 +240,14 @@ static const struct

 #endif

-
 #if GLOBAL_WR_PROTECT == true
 bool g_wr_protect;
 #endif

-
 /*! \name Control Interface
 */
 //! @{

-
 #ifdef FREERTOS_USED

 bool ctrl_access_init(void)
@@ -270,7 +265,6 @@ bool ctrl_access_init(void)
  return true;
 }

-
 /*! \brief Locks accesses to LUNs.
 *
 * \return \c true if the access was successfully locked, else \c false.
@@ -288,7 +282,6 @@ static bool ctrl_access_lock(void)

 #endif  // FREERTOS_USED

-
 U8 get_nb_lun(void)
 {
 #if MEM_USB == ENABLE
@@ -309,13 +302,11 @@ U8 get_nb_lun(void)
 #endif
 }

-
 U8 get_cur_lun(void)
 {
  return LUN_ID_0;
 }

-
 Ctrl_status mem_test_unit_ready(U8 lun)
 {
  Ctrl_status status;
@@ -337,7 +328,6 @@ Ctrl_status mem_test_unit_ready(U8 lun)
  return status;
 }

-
 Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
 {
  Ctrl_status status;
@@ -359,7 +349,6 @@ Ctrl_status mem_read_capacity(U8 lun, U32 *u32_nb_sector)
  return status;
 }

-
 U8 mem_sector_size(U8 lun)
 {
  U8 sector_size;
@@ -381,7 +370,6 @@ U8 mem_sector_size(U8 lun)
  return sector_size;
 }

-
 bool mem_unload(U8 lun, bool unload)
 {
  bool unloaded;
@@ -433,7 +421,6 @@ bool mem_wr_protect(U8 lun)
  return wr_protect;
 }

-
 bool mem_removal(U8 lun)
 {
  bool removal;
@@ -458,7 +445,6 @@ bool mem_removal(U8 lun)
  return removal;
 }

-
 const char *mem_name(U8 lun)
 {
 #if MAX_LUN==0
@@ -475,17 +461,14 @@ const char *mem_name(U8 lun)
 #endif
 }

-
 //! @}

-
 #if ACCESS_USB == true

 /*! \name MEM <-> USB Interface
 */
 //! @{

-
 Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
 {
  Ctrl_status status;
@@ -505,7 +488,6 @@ Ctrl_status memory_2_usb(U8 lun, U32 addr, U16 nb_sector)
  return status;
 }

-
 Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
 {
  Ctrl_status status;
@@ -525,19 +507,16 @@ Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector)
  return status;
 }

-
 //! @}

 #endif  // ACCESS_USB == true

-
 #if ACCESS_MEM_TO_RAM == true

 /*! \name MEM <-> RAM Interface
 */
 //! @{

-
 Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
 {
  Ctrl_status status;
@@ -564,7 +543,6 @@ Ctrl_status memory_2_ram(U8 lun, U32 addr, void *ram)
  return status;
 }

-
 Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
 {
  Ctrl_status status;
@@ -591,19 +569,16 @@ Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram)
  return status;
 }

-
 //! @}

 #endif  // ACCESS_MEM_TO_RAM == true

-
 #if ACCESS_STREAM == true

 /*! \name Streaming MEM <-> MEM Interface
 */
 //! @{

-
  #if ACCESS_MEM_TO_MEM == true

 #include "fat.h"
@@ -625,21 +600,18 @@ Ctrl_status stream_mem_to_mem(U8 src_lun, U32 src_addr, U8 dest_lun, U32 dest_ad

  #endif  // ACCESS_MEM_TO_MEM == true

-
 Ctrl_status stream_state(U8 id)
 {
  UNUSED(id);
  return CTRL_GOOD;
 }

-
 U16 stream_stop(U8 id)
 {
  UNUSED(id);
  return 0;
 }

-
 //! @}

 #endif // ACCESS_STREAM
@@ -56,7 +56,6 @@
 * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

-
 #ifndef _CTRL_ACCESS_H_
 #define _CTRL_ACCESS_H_

@@ -89,7 +88,6 @@ typedef enum
  CTRL_BUSY       = FAIL + 2  //!< Memory not initialized or changed.
 } Ctrl_status;

-
 // FYI: Each Logical Unit Number (LUN) corresponds to a memory.

 // Check LUN defines.
@@ -136,7 +134,6 @@ typedef enum
 #define LUN_ID_USB      (MAX_LUN)           //!< First dynamic LUN (USB host mass storage).
 //! @}

-
 // Include LUN header files.
 #if LUN_0 == ENABLE
  #include LUN_0_INCLUDE
@@ -166,13 +163,11 @@ typedef enum
  #include LUN_USB_INCLUDE
 #endif

-
 // Check the configuration of write protection in conf_access.h.
 #ifndef GLOBAL_WR_PROTECT
  #error GLOBAL_WR_PROTECT must be defined as true or false in conf_access.h
 #endif

-
 #if GLOBAL_WR_PROTECT == true

 //! Write protect.
@@ -180,7 +175,6 @@ extern bool g_wr_protect;

 #endif

-
 /*! \name Control Interface
 */
 //! @{
@@ -279,7 +273,6 @@ extern const char *mem_name(U8 lun);

 //! @}

-
 #if ACCESS_USB == true

 /*! \name MEM <-> USB Interface
@@ -310,7 +303,6 @@ extern Ctrl_status usb_2_memory(U8 lun, U32 addr, U16 nb_sector);

 #endif  // ACCESS_USB == true

-
 #if ACCESS_MEM_TO_RAM == true

 /*! \name MEM <-> RAM Interface
@@ -341,7 +333,6 @@ extern Ctrl_status ram_2_memory(U8 lun, U32 addr, const void *ram);

 #endif  // ACCESS_MEM_TO_RAM == true

-
 #if ACCESS_STREAM == true

 /*! \name Streaming MEM <-> MEM Interface
@@ -57,7 +57,6 @@

 #include "preprocessor.h"

-
 //! Maximal number of repetitions supported by MREPEAT.
 #define MREPEAT_LIMIT   256

@@ -128,7 +128,6 @@ static inline void osc_enable(uint32_t ul_id) {
    pmc_switch_sclk_to_32kxtal(PMC_OSC_BYPASS);
    break;

-
  case OSC_MAINCK_4M_RC:
    pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_4_MHz);
    break;
@@ -141,7 +140,6 @@ static inline void osc_enable(uint32_t ul_id) {
    pmc_switch_mainck_to_fastrc(CKGR_MOR_MOSCRCF_12_MHz);
    break;

-
  case OSC_MAINCK_XTAL:
    pmc_switch_mainck_to_xtal(PMC_OSC_XTAL/*,
      pmc_us_to_moscxtst(BOARD_OSC_STARTUP_US,
@@ -51,5 +51,4 @@
 #include "stringz.h"
 #include "mrepeat.h"

-
 #endif  // _PREPROCESSOR_H_
@@ -86,7 +86,6 @@ enum scsi_sbc_mode {
  SCSI_MS_MODE_CACHING = 0x08,    //!< Caching mode page
 };

-
 //! \name SBC-2 Device-Specific Parameter
 //@{
 #define SCSI_MS_SBC_WP              0x80    //!< Write Protected
@@ -45,7 +45,6 @@
 * Support and FAQ: visit <a href="https://www.atmel.com/design-support/">Atmel Support</a>
 */

-
 #ifndef _SD_MMC_SPI_MEM_H_
 #define _SD_MMC_SPI_MEM_H_

@@ -63,17 +62,14 @@
  #error sd_mmc_spi_mem.h is #included although SD_MMC_SPI_MEM is disabled
 #endif

-
 #include "ctrl_access.h"

-
 //_____ D E F I N I T I O N S ______________________________________________

 #define   SD_MMC_REMOVED       0
 #define   SD_MMC_INSERTED      1
 #define   SD_MMC_REMOVING      2

-
 //---- CONTROL FUNCTIONS ----
 //!
 //! @brief This function initializes the hw/sw resources required to drive the SD_MMC_SPI.
@@ -133,7 +129,6 @@ extern bool           sd_mmc_spi_wr_protect(void);
 //!
 extern bool           sd_mmc_spi_removal(void);

-
 //---- ACCESS DATA FUNCTIONS ----

 #if ACCESS_USB == true
@@ -212,7 +212,6 @@ extern "C" {
  #define CONFIG_USBCLK_DIV
 #endif

-
 extern void sysclk_enable_usb(void);
 extern void sysclk_disable_usb(void);

@@ -83,7 +83,6 @@ static usb_iface_desc_t UDC_DESC_STORAGE *udc_ptr_iface;

 //! @}

-
 //! \name Internal structure to store the USB device main strings
 //! @{

@@ -685,6 +685,4 @@ usb_iface_desc_t UDC_DESC_STORAGE *udc_get_interface_desc(void);
   } \endcode
 */

-
-
 #endif // _UDC_H_
@@ -213,7 +213,6 @@ void udd_send_remotewakeup(void);
 */
 void udd_set_setup_payload( uint8_t *payload, uint16_t payload_size );

-
 /**
 * \name Endpoint Management
 *
@@ -457,7 +457,6 @@ void udi_cdc_data_sof_notify(void)
 #endif
 }

-
 // ------------------------
 //------- Internal routines to control serial line

@@ -520,7 +519,6 @@ static void udi_cdc_ctrl_state_change(uint8_t port, bool b_set, le16_t bit_mask)
 	udi_cdc_ctrl_state_notify(port, ep_comm);
 }

-
 static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 {
 #if UDI_CDC_PORT_NB == 1 // To optimize code
@@ -542,7 +540,6 @@ static void udi_cdc_ctrl_state_notify(uint8_t port, udd_ep_id_t ep)
 	}
 }

-
 static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -578,11 +575,9 @@ static void udi_cdc_serial_state_msg_sent(udd_ep_status_t status, iram_size_t n,
 	udi_cdc_ctrl_state_notify(port, ep);
 }

-
 // ------------------------
 //------- Internal routines to process data transfer

-
 static bool udi_cdc_rx_start(uint8_t port)
 {
 	irqflags_t flags;
@@ -632,7 +627,6 @@ static bool udi_cdc_rx_start(uint8_t port)
 			udi_cdc_data_received);
 }

-
 static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t buf_sel_trans;
@@ -668,7 +662,6 @@ static void udi_cdc_data_received(udd_ep_status_t status, iram_size_t n, udd_ep_
 	udi_cdc_rx_start(port);
 }

-
 static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t ep)
 {
 	uint8_t port;
@@ -700,7 +693,6 @@ static void udi_cdc_data_sent(udd_ep_status_t status, iram_size_t n, udd_ep_id_t
 	udi_cdc_tx_send(port);
 }

-
 static void udi_cdc_tx_send(uint8_t port)
 {
 	irqflags_t flags;
@@ -780,11 +772,9 @@ static void udi_cdc_tx_send(uint8_t port)
 			udi_cdc_data_sent);
 }

-
 // ------------------------
 //------- Application interface

-
 //------- Application interface

 void udi_cdc_ctrl_signal_dcd(bool b_set)
@@ -106,7 +106,6 @@ typedef struct {
  usb_ep_desc_t ep_notify;
 } udi_cdc_comm_desc_t;

-
 /**
 * \brief Data Class interface descriptor
 *
@@ -121,7 +120,6 @@ typedef struct {
  usb_ep_desc_t ep_out;
 } udi_cdc_data_desc_t;

-
 //! CDC communication endpoints size for all speeds
 #define UDI_CDC_COMM_EP_SIZE        64
 //! CDC data endpoints size for FS speed (8B, 16B, 32B, 64B)
@@ -109,7 +109,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
  .bNumConfigurations = 1
 };

-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -93,7 +93,6 @@ UDC_DESC_STORAGE usb_dev_desc_t udc_device_desc = {
  .bNumConfigurations        = 1
 };

-
 #ifdef USB_DEVICE_HS_SUPPORT
 //! USB Device Qualifier Descriptor for HS
 COMPILER_WORD_ALIGNED
@@ -147,7 +146,6 @@ UDC_DESC_STORAGE udc_desc_t udc_desc_hs = {
 };
 #endif

-
 /**
 * \name UDC structures which contains all USB Device definitions
 */
@@ -86,7 +86,6 @@ UDC_DESC_STORAGE udi_api_t udi_api_msc = {
 };
 //@}

-
 /**
 * \ingroup udi_msc_group
 * \defgroup udi_msc_group_internal Implementation of UDI MSC
@@ -137,7 +136,6 @@ volatile bool udi_msc_b_reset_trans = true;

 //@}

-
 /**
 * \name Internal routines
 */
@@ -190,7 +188,6 @@ static void udi_msc_cbw_received(udd_ep_status_t status,
 static bool udi_msc_cbw_validate(uint32_t alloc_len, uint8_t dir_flag);
 //@}

-
 /**
 * \name Routines to process small data packet
 */
@@ -217,7 +214,6 @@ static void udi_msc_data_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
 //@}

-
 /**
 * \name Routines to process CSW packet
 */
@@ -250,7 +246,6 @@ static void udi_msc_csw_sent(udd_ep_status_t status, iram_size_t nb_sent,
    udd_ep_id_t ep);
 //@}

-
 /**
 * \name Routines manage sense data
 */
@@ -307,7 +302,6 @@ static void udi_msc_sense_fail_cdb_invalid(void);
 static void udi_msc_sense_command_invalid(void);
 //@}

-
 /**
 * \name Routines manage SCSI Commands
 */
@@ -293,7 +293,6 @@ do { \
 # endif
 #endif

-
 /**
 * \name Power management routine.
 */
@@ -310,7 +309,6 @@ static bool udd_b_idle;
 //! State of sleep manager
 static bool udd_b_sleep_initialized = false;

-
 /*! \brief Authorize or not the CPU powerdown mode
 *
 * \param b_enable true to authorize idle mode
@@ -338,7 +336,6 @@ static void udd_sleep_mode(bool b_idle)

 //@}

-
 /**
 * \name Control endpoint low level management routine.
 *
@@ -410,7 +407,6 @@ static void udd_ctrl_send_zlp_out(void);
 //! \brief Call callback associated to setup request
 static void udd_ctrl_endofrequest(void);

-
 /**
 * \brief Main interrupt routine for control endpoint
 *
@@ -422,7 +418,6 @@ static bool udd_ctrl_interrupt(void);

 //@}

-
 /**
 * \name Management of bulk/interrupt/isochronous endpoints
 *
@@ -460,7 +455,6 @@ typedef struct {
 	uint8_t stall_requested:1;
 } udd_ep_job_t;

-
 //! Array to register a job on bulk/interrupt/isochronous endpoint
 static udd_ep_job_t udd_ep_job[USB_DEVICE_MAX_EP];

@@ -522,7 +516,6 @@ static bool udd_ep_interrupt(void);
 #endif // (0!=USB_DEVICE_MAX_EP)
 //@}

-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED GLOBAL EVENTS

@@ -671,13 +664,11 @@ udd_interrupt_sof_end:
 	return;
 }

-
 bool udd_include_vbus_monitoring(void)
 {
 	return true;
 }

-
 void udd_enable(void)
 {
 	irqflags_t flags;
@@ -764,7 +755,6 @@ void udd_enable(void)
 	cpu_irq_restore(flags);
 }

-
 void udd_disable(void)
 {
 	irqflags_t flags;
@@ -866,7 +856,6 @@ void udd_attach(void)
 	cpu_irq_restore(flags);
 }

-
 void udd_detach(void)
 {
 	otg_unfreeze_clock();
@@ -883,7 +872,6 @@ void udd_detach(void)
 	udd_sleep_mode(false);
 }

-
 bool udd_is_high_speed(void)
 {
 #ifdef USB_DEVICE_HS_SUPPORT
@@ -893,7 +881,6 @@ bool udd_is_high_speed(void)
 #endif
 }

-
 void udd_set_address(uint8_t address)
 {
 	udd_disable_address();
@@ -901,13 +888,11 @@ void udd_set_address(uint8_t address)
 	udd_enable_address();
 }

-
 uint8_t udd_getaddress(void)
 {
 	return udd_get_configured_address();
 }

-
 uint16_t udd_get_frame_number(void)
 {
 	return udd_frame_number();
@@ -930,14 +915,12 @@ void udd_send_remotewakeup(void)
 	}
 }

-
 void udd_set_setup_payload(uint8_t *payload, uint16_t payload_size)
 {
 	udd_g_ctrlreq.payload = payload;
 	udd_g_ctrlreq.payload_size = payload_size;
 }

-
 #if (0 != USB_DEVICE_MAX_EP)
 bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 		uint16_t MaxEndpointSize)
@@ -1061,7 +1044,6 @@ bool udd_ep_alloc(udd_ep_id_t ep, uint8_t bmAttributes,
 	return true;
 }

-
 void udd_ep_free(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1074,14 +1056,12 @@ void udd_ep_free(udd_ep_id_t ep)
 	udd_ep_job[ep_index - 1].stall_requested = false;
 }

-
 bool udd_ep_is_halted(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
 	return Is_udd_endpoint_stall_requested(ep_index);
 }

-
 bool udd_ep_set_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1122,7 +1102,6 @@ bool udd_ep_set_halt(udd_ep_id_t ep)
 	return true;
 }

-
 bool udd_ep_clear_halt(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1163,7 +1142,6 @@ bool udd_ep_clear_halt(udd_ep_id_t ep)
 	return true;
 }

-
 bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 		uint8_t * buf, iram_size_t buf_size,
 		udd_callback_trans_t callback)
@@ -1230,7 +1208,6 @@ bool udd_ep_run(udd_ep_id_t ep, bool b_shortpacket,
 #endif
 }

-
 void udd_ep_abort(udd_ep_id_t ep)
 {
 	uint8_t ep_index = ep & USB_EP_ADDR_MASK;
@@ -1259,7 +1236,6 @@ void udd_ep_abort(udd_ep_id_t ep)
 	udd_ep_abort_job(ep);
 }

-
 bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 		udd_callback_halt_cleared_t callback)
 {
@@ -1294,7 +1270,6 @@ bool udd_ep_wait_stall_clear(udd_ep_id_t ep,
 }
 #endif // (0 != USB_DEVICE_MAX_EP)

-
 #ifdef USB_DEVICE_HS_SUPPORT

 void udd_test_mode_j(void)
@@ -1303,20 +1278,17 @@ void udd_test_mode_j(void)
 	udd_enable_hs_test_mode_j();
 }

-
 void udd_test_mode_k(void)
 {
 	udd_enable_hs_test_mode();
 	udd_enable_hs_test_mode_k();
 }

-
 void udd_test_mode_se0_nak(void)
 {
 	udd_enable_hs_test_mode();
 }

-
 void udd_test_mode_packet(void)
 {
 	uint8_t i;
@@ -1360,8 +1332,6 @@ void udd_test_mode_packet(void)
 }
 #endif // USB_DEVICE_HS_SUPPORT

-
-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE CONTROL ENDPOINT

@@ -1411,7 +1381,6 @@ static void udd_ctrl_init(void)
 	udd_ep_control_state = UDD_EPCTRL_SETUP;
 }

-
 static void udd_ctrl_setup_received(void)
 {
 	irqflags_t flags;
@@ -1473,7 +1442,6 @@ static void udd_ctrl_setup_received(void)
 	}
 }

-
 static void udd_ctrl_in_sent(void)
 {
 	static bool b_shortpacket = false;
@@ -1557,7 +1525,6 @@ static void udd_ctrl_in_sent(void)
 	cpu_irq_restore(flags);
 }

-
 static void udd_ctrl_out_received(void)
 {
 	irqflags_t flags;
@@ -1648,7 +1615,6 @@ static void udd_ctrl_out_received(void)
 	cpu_irq_restore(flags);
 }

-
 static void udd_ctrl_underflow(void)
 {
 	if (Is_udd_out_received(0))
@@ -1665,7 +1631,6 @@ static void udd_ctrl_underflow(void)
 	}
 }

-
 static void udd_ctrl_overflow(void)
 {
 	if (Is_udd_in_send(0))
@@ -1681,7 +1646,6 @@ static void udd_ctrl_overflow(void)
 	}
 }

-
 static void udd_ctrl_stall_data(void)
 {
 	// Stall all packets on IN & OUT control endpoint
@@ -1689,7 +1653,6 @@ static void udd_ctrl_stall_data(void)
 	udd_enable_stall_handshake(0);
 }

-
 static void udd_ctrl_send_zlp_in(void)
 {
 	irqflags_t flags;
@@ -1707,7 +1670,6 @@ static void udd_ctrl_send_zlp_in(void)
 	cpu_irq_restore(flags);
 }

-
 static void udd_ctrl_send_zlp_out(void)
 {
 	irqflags_t flags;
@@ -1723,7 +1685,6 @@ static void udd_ctrl_send_zlp_out(void)
 	cpu_irq_restore(flags);
 }

-
 static void udd_ctrl_endofrequest(void)
 {
 	// If a callback is registered then call it
@@ -1732,7 +1693,6 @@ static void udd_ctrl_endofrequest(void)
 	}
 }

-
 static bool udd_ctrl_interrupt(void)
 {

@@ -1783,7 +1743,6 @@ static bool udd_ctrl_interrupt(void)
 	return false;
 }

-
 // ------------------------
 //--- INTERNAL ROUTINES TO MANAGED THE BULK/INTERRUPT/ISOCHRONOUS ENDPOINTS

@@ -1798,7 +1757,6 @@ static void udd_ep_job_table_reset(void)
 	}
 }

-
 static void udd_ep_job_table_kill(void)
 {
 	uint8_t i;
@@ -1809,7 +1767,6 @@ static void udd_ep_job_table_kill(void)
 	}
 }

-
 static void udd_ep_abort_job(udd_ep_id_t ep)
 {
 	ep &= USB_EP_ADDR_MASK;
@@ -1818,7 +1775,6 @@ static void udd_ep_abort_job(udd_ep_id_t ep)
 	udd_ep_finish_job(&udd_ep_job[ep - 1], true, ep);
 }

-
 static void udd_ep_finish_job(udd_ep_job_t * ptr_job, bool b_abort, uint8_t ep_num)
 {
 	if (ptr_job->busy == false) {
@@ -1889,7 +1845,6 @@ static void udd_ep_trans_done(udd_ep_id_t ep)
 		udd_dma_ctrl |= UOTGHS_DEVDMACONTROL_END_BUFFIT |
 				UOTGHS_DEVDMACONTROL_CHANN_ENB;

-
 		// Disable IRQs to have a short sequence
 		// between read of EOT_STA and DMA enable
 		flags = cpu_irq_save();
@@ -129,7 +129,6 @@ extern "C" {
 #define Is_udd_vbus_transition()          (Tst_bits(UOTGHS->UOTGHS_SR, UOTGHS_SR_VBUSTI))
 //! @}

-
 //! @name UOTGHS device attach control
 //! These macros manage the UOTGHS Device attach.
 //! @{
@@ -141,7 +140,6 @@ extern "C" {
 #define Is_udd_detached()                 (Tst_bits(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_DETACH))
 //! @}

-
 //! @name UOTGHS device bus events control
 //! These macros manage the UOTGHS Device bus events.
 //! @{
@@ -246,7 +244,6 @@ extern "C" {
 #define udd_get_configured_address()              (Rd_bitfield(UOTGHS->UOTGHS_DEVCTRL, UOTGHS_DEVCTRL_UADD_Msk))
 //! @}

-
 //! @name UOTGHS Device endpoint drivers
 //! These macros manage the common features of the endpoints.
 //! @{
@@ -330,7 +327,6 @@ extern "C" {
 #define udd_data_toggle(ep)                       (Rd_bitfield(UOTGHS_ARRAY(UOTGHS_DEVEPTISR[0], ep), UOTGHS_DEVEPTISR_DTSEQ_Msk))
 //! @}

-
 //! @name UOTGHS Device control endpoint
 //! These macros control the endpoints.
 //! @{
@@ -530,7 +526,6 @@ extern "C" {
  //! Tests if IN sending interrupt is enabled
 #define Is_udd_in_send_interrupt_enabled(ep)      (Tst_bits(UOTGHS_ARRAY(UOTGHS_DEVEPTIMR[0], ep), UOTGHS_DEVEPTIMR_TXINE))

-
  //! Get 64-, 32-, 16- or 8-bit access to FIFO data register of selected endpoint.
  //! @param ep Endpoint of which to access FIFO data register
  //! @param scale Data scale in bits: 64, 32, 16 or 8
@@ -652,7 +647,6 @@ typedef struct {
 //! @}
 //! @}

-
 /// @cond 0
 /**INDENT-OFF**/
 #ifdef __cplusplus
@@ -53,7 +53,6 @@
 extern "C" {
 #endif

-
 //! \ingroup usb_group
 //! \defgroup otg_group UOTGHS OTG Driver
 //! UOTGHS low-level driver for OTG features
@@ -74,7 +73,6 @@ bool otg_dual_enable(void);
 */
 void otg_dual_disable(void);

-
 //! @name UOTGHS OTG ID pin management
 //! The ID pin come from the USB OTG connector (A and B receptable) and
 //! allows to select the USB mode host or device.
@@ -374,7 +374,6 @@ typedef struct {
  uint8_t bNumDeviceCaps;
 } usb_dev_bos_desc_t;

-
 /**
 * \brief USB Device Capabilities - USB 2.0 Extension Descriptor structure
 *
@@ -411,7 +410,6 @@ typedef struct {
  uint8_t iFunction;        //!< Index of string descriptor
 } usb_association_desc_t;

-
 /**
 * \brief Standard USB configuration descriptor structure
 */
@@ -426,7 +424,6 @@ typedef struct {
  uint8_t bMaxPower;
 } usb_conf_desc_t;

-
 #define  USB_CONFIG_ATTR_MUST_SET         (1 << 7) //!< Must always be set
 #define  USB_CONFIG_ATTR_BUS_POWERED      (0 << 6) //!< Bus-powered
 #define  USB_CONFIG_ATTR_SELF_POWERED     (1 << 6) //!< Self-powered
@@ -475,7 +472,6 @@ typedef struct {
  uint8_t bInterval;
 } usb_ep_desc_t;

-
 /**
 * \brief A standard USB string descriptor structure
 */
@@ -168,7 +168,6 @@ COMPILER_PACK_SET(1)
 //! \name USB CDC Descriptors
 //@{

-
 //! CDC Header Functional Descriptor
 typedef struct {
  uint8_t bFunctionLength;
@@ -203,7 +202,6 @@ typedef struct {
  uint8_t bSlaveInterface0;
 } usb_cdc_union_desc_t;

-
 //! \name USB CDC Call Management Capabilities
 //@{
 //! Device handles call management itself
@@ -278,7 +276,6 @@ typedef struct {
 //@}
 //@}

-
 //! \name USB CDC notification message
 //@{

@@ -47,7 +47,6 @@
 #ifndef _USB_PROTOCOL_MSC_H_
 #define _USB_PROTOCOL_MSC_H_

-
 /**
 * \ingroup usb_protocol_group
 * \defgroup usb_msc_protocol USB Mass Storage Class (MSC) protocol definitions
@@ -89,7 +88,6 @@
 #define MSC_PROTOCOL_BULK           0x50  //!< Bulk-only
 //@}

-
 /**
 * \brief MSC USB requests (bRequest)
 */
@@ -98,7 +96,6 @@ enum usb_reqid_msc {
  USB_REQ_MSC_GET_MAX_LUN = 0xFE  //!< Get Max LUN
 };

-
 COMPILER_PACK_SET(1)

 /**
@@ -122,7 +119,6 @@ struct usb_msc_cbw {
 #define USB_CBW_LEN_MASK            0x1F  //!< Valid bits in bCBWCBLength
 //@}

-
 /**
 * \name A Command Status Wrapper (CSW).
 */
@@ -31,24 +31,28 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { return EEPROM.begin(MARLIN_EEPROM_SIZE); }
 bool PersistentStore::access_finish() { EEPROM.end(); return true; }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  for (size_t i = 0; i < size; i++) {
-    EEPROM.write(pos++, value[i]);
+    const int p = REAL_EEPROM_ADDR(pos);
+    EEPROM.write(p, value[i]);
    crc16(crc, &value[i], 1);
+    ++pos;
  }
  return false;
 }

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  for (size_t i = 0; i < size; i++) {
-    uint8_t c = EEPROM.read(pos++);
+    const int p = REAL_EEPROM_ADDR(pos);
+    uint8_t c = EEPROM.read(p);
    if (writing) value[i] = c;
    crc16(crc, &c, 1);
+    ++pos;
  }
  return false;
 }
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -27,7 +27,7 @@

 /**
 * Not every MarlinSerial instance should handle emergency parsing, as
- * it would not make sense to parse GCode from TMC responses
+ * it would not make sense to parse G-Code from TMC responses
 */
 constexpr bool serial_handles_emergency(int port) {
  return false
@@ -37,7 +37,7 @@
  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
 #endif

-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  eeprom_init();
@@ -49,7 +49,7 @@ bool PersistentStore::access_finish() { return true; }
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    uint8_t v = *value;
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);

    // EEPROM has only ~100,000 write cycles,
    // so only write bytes that have changed!
@@ -70,16 +70,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  return false;
 }

-bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size,
-                                uint16_t *crc, const bool writing /*=true*/) {
+bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
  do {
-    uint8_t *const p = (uint8_t *const)pos;
-    uint8_t c = eeprom_read_byte(p);
-    if (writing)
-    {
-      *value = c;
-    }
-
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
+    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
    value++;
@@ -38,9 +38,7 @@
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif

-size_t PersistentStore::capacity() {
-  return MARLIN_EEPROM_SIZE;
-}
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 #define _ALIGN(x) __attribute__((aligned(x)))
 static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
@@ -85,11 +83,10 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, const size_t size, uint16_t *crc, const bool writing /*=true*/) {
  for (size_t i = 0; i < size; i++) {
-    uint8_t c = HAL_eeprom_data[pos + i];
+    const uint8_t c = HAL_eeprom_data[pos + i];
    if (writing) value[i] = c;
    crc16(crc, &c, 1);
  }
-
  pos += size;
  return false;
 }
@@ -35,7 +35,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_finish() { return true; }

@@ -56,7 +56,7 @@ bool PersistentStore::access_start() {

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
-    uint8_t *const p = (uint8_t *const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    uint8_t v = *value;
    // EEPROM has only ~100,000 write cycles,
    // so only write bytes that have changed!
@@ -77,10 +77,8 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing /*=true*/) {
  do {
-    uint8_t c = eeprom_read_byte((uint8_t *)pos);
-    if (writing && value) {
-      *value = c;
-    }
+    const uint8_t c = eeprom_read_byte((uint8_t *)REAL_EEPROM_ADDR(pos));
+    if (writing && value) *value = c;

    crc16(crc, &c, 1);
    pos++;
@@ -40,9 +40,15 @@ void endstopIRQHandler() {
  CHECK(X_MAX);
  CHECK(X_MIN);

+  CHECK(X2_MAX);
+  CHECK(X2_MIN);
+
  CHECK(Y_MAX);
  CHECK(Y_MIN);

+  CHECK(Y2_MAX);
+  CHECK(Y2_MIN);
+
  CHECK(Z_MAX);
  CHECK(Z_MIN);

@@ -52,6 +58,9 @@ void endstopIRQHandler() {
  CHECK(Z3_MAX);
  CHECK(Z3_MIN);

+  CHECK(Z4_MAX);
+  CHECK(Z4_MIN);
+
  CHECK(Z_MIN_PROBE);

  // Update endstops
@@ -69,9 +78,15 @@ void setup_endstop_interrupts() {
  SETUP(X_MAX);
  SETUP(X_MIN);

+  SETUP(X2_MAX);
+  SETUP(X2_MIN);
+
  SETUP(Y_MAX);
  SETUP(Y_MIN);

+  SETUP(Y2_MAX);
+  SETUP(Y2_MIN);
+
  SETUP(Z_MAX);
  SETUP(Z_MIN);

@@ -81,6 +96,9 @@ void setup_endstop_interrupts() {
  SETUP(Z3_MAX);
  SETUP(Z3_MIN);

+  SETUP(Z4_MAX);
+  SETUP(Z4_MIN);
+
  SETUP(Z_MIN_PROBE);

  #undef SETUP
@@ -88,7 +106,7 @@ void setup_endstop_interrupts() {

 // Ensure 1 - 10 IRQs are registered
 // Disable some endstops if you encounter this error
-#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_Y_MAX, USE_Y_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z_MIN_PROBE)
+#define ENDSTOPS_INTERRUPTS_COUNT COUNT_ENABLED(USE_X_MAX, USE_X_MIN, USE_X2_MAX, USE_X2_MIN, USE_Y_MAX, USE_Y_MIN, USE_Y2_MAX, USE_Y2_MIN, USE_Z_MAX, USE_Z_MIN, USE_Z2_MAX, USE_Z2_MIN, USE_Z3_MAX, USE_Z3_MIN, USE_Z4_MAX, USE_Z4_MIN, USE_Z_MIN_PROBE)
 #if ENDSTOPS_INTERRUPTS_COUNT > 10
  #error "Too many endstop interrupts! HC32F460 only supports 10 endstop interrupts."
 #elif ENDSTOPS_INTERRUPTS_COUNT == 0
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -58,11 +58,9 @@
 #endif

 #if TEMP_SENSOR_SOC
-  #if !defined(TEMP_SOC_PIN)
+  #ifndef TEMP_SOC_PIN
    #error "TEMP_SOC_PIN must be defined to use TEMP_SENSOR_SOC."
-  #endif
-
-  #if defined(TEMP_SOC_PIN) && IS_GPIO_PIN(TEMP_SOC_PIN)
+  #elif IS_GPIO_PIN(TEMP_SOC_PIN)
    #error "TEMP_SOC_PIN must not be a valid GPIO pin to avoid conflicts."
  #endif
 #endif
@@ -23,7 +23,7 @@
 #ifdef ARDUINO_ARCH_HC32
 #ifdef REDIRECT_PRINTF_TO_SERIAL

-#if !defined(__GNUC__)
+#ifndef __GNUC__
  #error "only GCC is supported"
 #endif

@@ -35,7 +35,7 @@
 uint8_t buffer[MARLIN_EEPROM_SIZE];
 char filename[] = "eeprom.dat";

-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  const char eeprom_erase_value = 0xFF;
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -60,7 +60,6 @@

 #define INVALID_SERVO         255     // flag indicating an invalid servo index

-
 // Types

 typedef struct {
@@ -21,9 +21,6 @@
 */
 #pragma once

-#include "../../core/macros.h"
-#include "../../inc/MarlinConfigPre.h"
-
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                        // needed due to the speed and mode required for communicating with each device being different.
@@ -111,6 +111,12 @@ void MarlinHAL::init() {
  #if HAS_SERVO_3
    INIT_SERVO(3);
  #endif
+  #if HAS_SERVO_4
+    INIT_SERVO(4);
+  #endif
+  #if HAS_SERVO_5
+    INIT_SERVO(5);
+  #endif

  //debug_frmwrk_init();
  //_DBG("\n\nDebug running\n");
@@ -61,7 +61,7 @@ static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
 static bool eeprom_dirty = false;
 static int current_slot = 0;

-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  uint32_t first_nblank_loc, first_nblank_val;
@@ -112,7 +112,8 @@ bool PersistentStore::access_finish() {
 }

 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  for (size_t i = 0; i < size; i++) ram_eeprom[pos + i] = value[i];
+  const int p = REAL_EEPROM_ADDR(pos);
+  for (size_t i = 0; i < size; i++) ram_eeprom[p + i] = value[i];
  eeprom_dirty = true;
  crc16(crc, value, size);
  pos += size;
@@ -120,8 +121,9 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 }

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  const int p = REAL_EEPROM_ADDR(pos);
  const uint8_t * const buff = writing ? &value[0] : &ram_eeprom[pos];
-  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[pos + i];
+  if (writing) for (size_t i = 0; i < size; i++) value[i] = ram_eeprom[p + i];
  crc16(crc, buff, size);
  pos += size;
  return false;  // return true for any error
@@ -49,7 +49,7 @@ bool eeprom_file_open = false;
  #define MARLIN_EEPROM_SIZE size_t(0x1000) // 4KiB of Emulated EEPROM
 #endif

-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  const char eeprom_erase_value = 0xFF;
@@ -36,7 +36,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE           0x8000 // 32K
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -45,7 +45,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -64,7 +64,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from external EEPROM
-    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -21,9 +21,7 @@
 */
 #pragma once

-#include "../../core/macros.h"
-
-#if ALL(HAS_MEDIA, HAS_MARLINUI_U8GLIB) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
+#if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                        // needed due to the speed and mode required for communicating with each device being different.
                        // This requirement can be removed if the SPI access to these devices is updated to use
@@ -8,14 +8,12 @@ DriverVer =04/14/2008, 5.1.2600.5512
 [Manufacturer]
 %PROVIDER%=DeviceList,ntamd64

-
 [DeviceList]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00

 [DeviceList.ntamd64]
 %DESCRIPTION%=LPC1768USB, USB\VID_1D50&PID_6029&MI_00

-
 [LPC1768USB]
 include=mdmcpq.inf
 CopyFiles=FakeModemCopyFileSection
@@ -28,9 +26,8 @@ AddService=usbser, 0x00000002, LowerFilter_Service_Inst
 [SerialPropPageAddReg]
 HKR,,EnumPropPages32,,"MsPorts.dll,SerialPortPropPageProvider"

-
 [Strings]
 PROVIDER   = "marlinfw.org"
 DRIVER.SVC = "Marlin USB Driver"
 DESCRIPTION= "Marlin USB Serial"
-COMPOSITE  = "Marlin USB VCOM"
+COMPOSITE  = "Marlin USB VCOM"
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -61,7 +61,6 @@

 #define INVALID_SERVO         255     // flag indicating an invalid servo index

-
 // Types

 typedef struct {
@@ -21,9 +21,6 @@
 */
 #pragma once

-#include "../../core/macros.h"
-#include "../../inc/MarlinConfigPre.h"
-
 #if ALL(HAS_MARLINUI_U8GLIB, HAS_MEDIA) && (LCD_PINS_D4 == SD_SCK_PIN || LCD_PINS_EN == SD_MOSI_PIN || DOGLCD_SCK == SD_SCK_PIN || DOGLCD_MOSI == SD_MOSI_PIN)
  #define SOFTWARE_SPI      // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                            // needed due to the speed and mode required for communicating with each device being different.
@@ -31,7 +31,6 @@
 * resulted in using about about 25% of the CPU's time.
 */

-
 #ifdef __cplusplus
  extern "C" {
 #endif
@@ -40,8 +40,6 @@
  DefaultSerial3 MSerial2(false, Serial2);
 #endif

-
-
 #define WDT_CONFIG_PER_7_Val 0x9u
 #define WDT_CONFIG_PER_Pos 0
 #define WDT_CONFIG_PER_7 (WDT_CONFIG_PER_7_Val << WDT_CONFIG_PER_Pos)
@@ -165,7 +163,6 @@ void MarlinHAL::adc_init() {
  ADC->REFCTRL.reg = ADC_REFCTRL_REFSEL_INTVCC1;
  ADC->AVGCTRL.reg = ADC_AVGCTRL_SAMPLENUM_32| ADC_AVGCTRL_ADJRES(4);;

-
  ADC->CTRLB.reg = ADC_CTRLB_PRESCALER_DIV128 |
                 ADC_CTRLB_RESSEL_16BIT |
                 ADC_CTRLB_FREERUN;
@@ -47,7 +47,6 @@ typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
 extern DefaultSerial2 MSerial0;
 extern DefaultSerial3 MSerial1;

-
 #define __MSERIAL(X) MSerial##X
 #define _MSERIAL(X) __MSERIAL(X)
 #define MSERIAL(X) _MSERIAL(INCREMENT(X))
@@ -57,8 +57,6 @@
                                       : (P == 3 && WITHIN(B, 20, 21)) ? 10 + (B) - 20                                        \
                                       : -1)

-
-
 #define A2_AIN 3
 #define A3_AIN 4
 #define A4_AIN 5
@@ -55,7 +55,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF

-
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)

 FORCE_INLINE static uint16_t getTimerCount() {
@@ -37,19 +37,24 @@ static const uint8_t flashdata[TOTAL_FLASH_SIZE]  __attribute__((__aligned__(256

 #include "../shared/eeprom_api.h"

-size_t PersistentStore::capacity() {
-  return MARLIN_EEPROM_SIZE;
- /* const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
+
+/*
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }
+  const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
                sblk = NVMCTRL->SEESTAT.bit.SBLK;

-  return   (!psz && !sblk)         ? 0
-         : (psz <= 2)              ? (0x200 << psz)
-         : (sblk == 1 || psz == 3) ?  4096
-         : (sblk == 2 || psz == 4) ?  8192
-         : (sblk <= 4 || psz == 5) ? 16384
-         : (sblk >= 9 && psz == 7) ? 65536
-                                   : 32768;*/
+  return (
+    (!psz && !sblk)         ? 0
+   : (psz <= 2)              ? (0x200 << psz)
+   : (sblk == 1 || psz == 3) ?  4096
+   : (sblk == 2 || psz == 4) ?  8192
+   : (sblk <= 4 || psz == 5) ? 16384
+   : (sblk >= 9 && psz == 7) ? 65536
+                             : 32768
+  ) - eeprom_exclude_size;
 }
+*/

 uint32_t PAGE_SIZE;
 uint32_t ROW_SIZE;
@@ -99,8 +104,7 @@ bool PersistentStore::access_finish() {
    volatile uint32_t *dst_addr =  (volatile uint32_t *) &flashdata;

    uint32_t *pointer = (uint32_t *) buffer;
-    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i+=4) {
-
+    for (uint32_t i = 0; i < TOTAL_FLASH_SIZE; i += 4) {
      *dst_addr = (uint32_t) *pointer;
      pointer++;
      dst_addr ++;
@@ -120,19 +124,19 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  if (!hasWritten) {
    // init temp buffer
    buffer = (uint8_t *) malloc(MARLIN_EEPROM_SIZE);
-    hasWritten=true;
+    hasWritten = true;
  }

-  memcpy(buffer+pos,value,size);
+  memcpy(buffer + REAL_EEPROM_ADDR(pos), value, size);
  pos += size;
  return false;
 }

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  volatile uint8_t *dst_addr =  (volatile uint8_t *) &flashdata;
-  dst_addr += pos;
+  volatile uint8_t *dst_addr = (volatile uint8_t *) &flashdata;
+  dst_addr += REAL_EEPROM_ADDR(pos);

-  memcpy(value,(const void *) dst_addr,size);
+  memcpy(value, (const void *)dst_addr, size);
  pos += size;
  return false;
 }
@@ -38,7 +38,7 @@

 static bool initialized;

-size_t PersistentStore::capacity() { return qspi.size(); }
+size_t PersistentStore::capacity() { return qspi.size() - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  if (!initialized) {
@@ -56,7 +56,7 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    const uint8_t v = *value;
-    qspi.writeByte(pos, v);
+    qspi.writeByte(REAL_EEPROM_ADDR(pos), v);
    crc16(crc, &v, 1);
    pos++;
    value++;
@@ -66,7 +66,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = qspi.readByte(pos);
+    const uint8_t c = qspi.readByte(REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -42,7 +42,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -51,7 +51,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -69,7 +69,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -85,7 +85,6 @@ void u8g_SetPILevel(u8g_t *u8g, uint8_t pin_index, uint8_t level) {

 uint8_t u8g_com_samd21_st7920_hw_spi_fn(u8g_t *u8g, uint8_t msg, uint8_t arg_val, void *arg_ptr) {

-
  switch (msg) {
    case U8G_COM_MSG_STOP:
      break;
@@ -54,7 +54,6 @@
 #define TIMER_TCCHANNEL(t)      ((t) & 1)
 #define TC_COUNTER_START_VAL    0xFFFF

-
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)

 FORCE_INLINE static uint16_t getTimerCount() {
@@ -35,7 +35,7 @@

 static bool initialized;

-size_t PersistentStore::capacity() { return qspi.size(); }
+size_t PersistentStore::capacity() { return qspi.size() - eeprom_exclude_size; }

 bool PersistentStore::access_start() {
  if (!initialized) {
@@ -53,7 +53,7 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    const uint8_t v = *value;
-    qspi.writeByte(pos, v);
+    qspi.writeByte(REAL_EEPROM_ADDR(pos), v);
    crc16(crc, &v, 1);
    pos++;
    value++;
@@ -63,7 +63,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = qspi.readByte(pos);
+    const uint8_t c = qspi.readByte(REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -40,7 +40,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #error "MARLIN_EEPROM_SIZE is required for I2C / SPI EEPROM."
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -49,7 +49,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -67,7 +67,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
@@ -126,7 +126,7 @@
  void serialEvent2() __attribute__((weak));
 #endif
 #ifdef USING_HW_SERIAL3
-  HAL_HardwareSerial Serial3(USART3);
+  HAL_HardwareSerial HSerial3(USART3);
  void serialEvent3() __attribute__((weak));
 #endif
 #ifdef USING_HW_SERIAL4
@@ -147,11 +147,11 @@
 #endif
 #ifdef USING_HW_SERIAL6
  #ifdef USART6
-    HAL_HardwareSerial HSerial5(USART6);
+    HAL_HardwareSerial HSerial6(USART6);
  #else
-    HAL_HardwareSerial HSerial5(UART6);
+    HAL_HardwareSerial HSerial6(UART6);
  #endif
-  void serialEvent5() __attribute__((weak));
+  void serialEvent6() __attribute__((weak));
 #endif

 // Constructors ////////////////////////////////////////////////////////////////
@@ -44,7 +44,7 @@
  #error "MARLIN_EEPROM_SIZE is required for IIC_BL24CXX_EEPROM."
 #endif

-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -53,7 +53,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -71,8 +71,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t c = eeprom_read_byte(p);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -101,7 +101,7 @@ static bool eeprom_data_written = false;
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start() {

@@ -245,14 +245,15 @@ bool PersistentStore::access_finish() {
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
  while (size--) {
    uint8_t v = *value;
+    const int p = REAL_EEPROM_ADDR(pos);
    #if ENABLED(FLASH_EEPROM_LEVELING)
-      if (v != ram_eeprom[pos]) {
-        ram_eeprom[pos] = v;
+      if (v != ram_eeprom[p]) {
+        ram_eeprom[p] = v;
        eeprom_data_written = true;
      }
    #else
-      if (v != eeprom_buffered_read_byte(pos)) {
-        eeprom_buffered_write_byte(pos, v);
+      if (v != eeprom_buffered_read_byte(p)) {
+        eeprom_buffered_write_byte(p, v);
        eeprom_data_written = true;
      }
    #endif
@@ -265,7 +266,8 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui

 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
-    const uint8_t c = TERN(FLASH_EEPROM_LEVELING, ram_eeprom[pos], eeprom_buffered_read_byte(pos));
+    const int p = REAL_EEPROM_ADDR(pos);
+    const uint8_t c = TERN(FLASH_EEPROM_LEVELING, ram_eeprom[p], eeprom_buffered_read_byte(p));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -40,7 +40,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 #define _ALIGN(x) __attribute__ ((aligned(x)))
 static char _ALIGN(4) HAL_eeprom_data[MARLIN_EEPROM_SIZE];
@@ -33,7 +33,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE 0x1000 // 4KB
 #endif
-size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity()    { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -38,7 +38,7 @@
 #ifndef MARLIN_EEPROM_SIZE
  #define MARLIN_EEPROM_SIZE size_t(E2END + 1)
 #endif
-size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE; }
+size_t PersistentStore::capacity() { return MARLIN_EEPROM_SIZE - eeprom_exclude_size; }

 bool PersistentStore::access_start()  { eeprom_init(); return true; }
 bool PersistentStore::access_finish() { return true; }
@@ -47,7 +47,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
  uint16_t written = 0;
  while (size--) {
    uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
+    uint8_t * const p = (uint8_t * const)REAL_EEPROM_ADDR(pos);
    if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
      eeprom_write_byte(p, v);
      if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
@@ -66,7 +66,7 @@ bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, ui
 bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
  do {
    // Read from either external EEPROM, program flash or Backup SRAM
-    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
+    const uint8_t c = eeprom_read_byte((uint8_t*)REAL_EEPROM_ADDR(pos));
    if (writing) *value = c;
    crc16(crc, &c, 1);
    pos++;
@@ -0,0 +1,22 @@
+/**
+ * Marlin 3D Printer Firmware
+ * Copyright (c) 2024 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <https://www.gnu.org/licenses/>.
+ *
+ */
+#pragma once
--- a/Show More
+++ b/Show More
Author	SHA1	Message	Date
InsanityAutomation	3e15472e05	Update MarlinCore.cpp	2024-04-10 15:12:02 -04:00
InsanityAutomation	55360141fd	Update MarlinCore.cpp	2024-04-07 19:33:27 -04:00
Keith Bennett	a3434de2e6	🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 (#26831 ) * 🩹 Fix MCU check for STM32H7-based BTT Octopus Pro V1 Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com> * Update Marlin/src/pins/stm32f4/pins_BTT_OCTOPUS_V1_common.h --------- Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>	2024-04-07 12:05:35 -07:00
Keith Bennett	2bf56b00d4	🔧 Improve BIQU BX pins, allow Z swap (#26871 ) * Add a swap Z & E1 option for BIQU BX Users can add #define BX_SWAP_ZM_E1M to their config instead of opening their printer up & swapping Z & E1 motor cables. Allows G34 to work correctly on early BX printers since both Z motor wires were installed without a standard procedure in place and wires could be swapped from the factory. * Add BOARD URL, DIAG pin info, update pin comments * Add WIFISUPPORT defines for documentation purposes WIFISUPPORT does not need to be enabled (read: shouldn't be enabled). Simply enable an available SERIAL_PORT, set it to 4, and connect an ESP-01/ESP-01S flashed with luc-github's ESP3D firmware for basic WiFi functionality. Sanity check TOUCH_SCREEN_CALIBRATION on GT911 TFTs (BIQU BX TFT70) Use a sanity check so it's clear which options are valid for TFT_TOUCH_DEVICE_GT911 / BIQU_BX_TFT70.	2024-04-07 10:49:36 -07:00
Andrew Bortz	c31d9e717b	🩹Fix ProUI Z probe offset text (#26832 )	2024-04-07 09:37:37 -07:00
narno2202	d9d7820b0d	🩹 Set correct LCD serial port for MKS_MONSTER8_V1 (#26879 )	2024-04-07 08:52:35 -07:00
sargonphin	9343247e07	🩹Increase range of G34 accuracy target (#26771 ) * Allow G34 accuracy down to 0.001mm, previous minimum was 0.01mm.	2024-04-07 08:48:13 -07:00
ellensp	351a1a1332	🔧 Add UART 5 for SKR Mini E3 V3.0 (#26825 )	2024-04-06 23:29:19 -07:00
thinkyhead	7e9868d762	[cron] Bump distribution date (2024-04-07)	2024-04-07 06:05:53 +00:00
ellensp	d1cf817660	🐛 Fix CREALITY_ENDER2P_V24S4 pins (#26908 )	2024-04-06 22:57:42 -07:00
Vovodroid	c91771a51e	🩹Disable nonlinear extrusion on unretract (#26824 ) * Fixes disable NLE on unretract #26808, which reported blobs at the start of lines during unretract.	2024-04-06 22:41:01 -07:00
ellensp	a337a43bfd	🩹 Fix type mismatch when SEGMENT_LEVELED_MOVES disabled (#26819 )	2024-04-06 21:47:40 -07:00
Keith Bennett	77f93e0b8c	🩹 Fix Mini 12864 on BTT Kraken (#26918 ) Co-authored-by: ellensp <530024+ellensp@users.noreply.github.com>	2024-04-06 21:22:25 -07:00
Keith Bennett	7dc7195696	🩹 Fix active extruder indicator (#26834 ) * 🩹 No active extruder when any of several incompatible features are enabled	2024-04-06 21:17:00 -07:00
ellensp	56773bd80e	🩹 add onSetMinExtrusionTemp to anycubic_viper (#26933 )	2024-04-06 21:11:32 -07:00
thinkyhead	1dec9831d3	[cron] Bump distribution date (2024-04-06)	2024-04-06 06:06:36 +00:00
Jason Smith	390f1f7c69	🐛 Don't apply settings during validation (#26935 ) Check the `validating` variable before applying settings for several features. This specifically avoids settings corruption for BACKLASH_PREVENTION, which has side-effects when first applied using incorrect values.	2024-04-05 17:27:30 -07:00
Jason Smith	d30fcb8fff	🐛 Fix bool evalution of XYval and similar types (#26936 ) Require explicit cast to get T* pointers from XYval and similar types. This prevents the pointer from being implicitly returned and checked for nullptr when trying to evaluate these structs in boolean expressions.	2024-04-05 17:24:58 -07:00
thinkyhead	17dfe8edc9	[cron] Bump distribution date (2024-04-03)	2024-04-03 00:20:46 +00:00
Scott Lahteine	7b6b6e1c3e	🩹 Revert motion change	2024-04-01 22:20:28 -05:00
Sophist	60f2837a98	🔧 Minor INPUT_SHAPING config fixes (#26882 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-04-01 21:30:04 -05:00
thinkyhead	ef5fb390ec	[cron] Bump distribution date (2024-04-02)	2024-04-02 00:20:47 +00:00
Andrew	87e94f4563	🚸 Update ProUI Plot graph - part 2 (#26563 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-04-01 15:05:11 -05:00
thinkyhead	017a9032f1	[cron] Bump distribution date (2024-04-01)	2024-04-01 00:23:48 +00:00
Scott Lahteine	466282f322	🩹 Misc. changes from ProUI / ExtUI updates (#26928 )	2024-03-31 18:20:37 -05:00
thinkyhead	17594298e1	[cron] Bump distribution date (2024-03-28)	2024-03-28 00:20:53 +00:00
Jordan Stocker	0b9f487ab9	🔨 Fix binary upload firmware path (#26909 )	2024-03-27 14:44:03 -05:00
Chris	d3e1a92b84	🔨 Fix HC32 preflight (#26912 )	2024-03-27 14:39:54 -05:00
Holger Mößinger	cd357b0278	🔧🚸 Tweaks for (MiniRambo) CNC (#26892 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-03-27 14:38:08 -05:00
thinkyhead	d0d229e380	[cron] Bump distribution date (2024-03-25)	2024-03-25 00:21:58 +00:00
Ikko Eltociear Ashimine	eb897e65a1	📝 Fix Cutter.md typo (#26901 )	2024-03-24 13:49:25 -05:00
thinkyhead	825ebfd5fe	[cron] Bump distribution date (2024-03-24)	2024-03-24 00:23:21 +00:00
John Robertson	3ee3964bec	🐛 Fix ESP32 laser M4 exception (#26884 )	2024-03-22 19:57:23 -05:00
Sophist	aecfb257e9	🚸 Hide auto-run as needed (#26853 )	2024-03-22 19:29:06 -05:00
thinkyhead	896a6a93af	[cron] Bump distribution date (2024-03-23)	2024-03-23 00:20:15 +00:00
Holger Mößinger	075f96d2bf	✏️ Fix stepper MS pin typos (#26891 )	2024-03-22 16:36:42 -05:00
thinkyhead	05896551f1	[cron] Bump distribution date (2024-03-18)	2024-03-18 00:21:39 +00:00
Manuel McLure	ea6a891038	✨ MAX7219_REINIT_ON_POWERUP (#26163 )	2024-03-17 14:23:12 -05:00
Giuliano Zaro	983aee5718	🌐 Update Italian language (#26837 )	2024-03-16 19:46:22 -05:00
thinkyhead	c913020dc2	[cron] Bump distribution date (2024-03-17)	2024-03-17 00:22:34 +00:00
Scott Lahteine	a50490b11f	👷 Minor signature.py adjustments	2024-03-16 16:39:47 -05:00
Sophist	4b01c901bc	📝 Fix M201 typos (#26854 )	2024-03-16 15:00:16 -05:00
Keith Bennett	c1be36bc66	🎨 Add MKS TinyBee silkscreen labels (#26777 )	2024-03-16 14:58:53 -05:00
Keith Bennett	e0222d3e01	🩹 Fix G35 "Probing Failed" output (#26780 )	2024-03-16 14:56:33 -05:00
janenen	c0264ae787	🐛 Fix DETECT_BROKEN_ENDSTOP on IDEX (#26790 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-03-16 14:52:14 -05:00
Sophist	3a2c50c199	🩹 Thermistor name fixes (#26857 )	2024-03-16 14:09:50 -05:00
Scott Lahteine	3b4adac579	🎨 Trailing ws	2024-03-16 13:55:35 -05:00
ellensp	d36b3fbf9d	🧑‍💻 Fix RLE script for infille == outfile (#26795 )	2024-03-16 13:37:42 -05:00
Keith Bennett	bca40e07e3	📝 Remove Flattr Link (#26796 )	2024-03-16 13:34:02 -05:00
thinkyhead	9a1c993719	[cron] Bump distribution date (2024-03-10)	2024-03-10 06:05:40 +00:00
InsanityAutomation	504219817c	✨ Redundant PSU Control with EDM (#26751 )	2024-03-09 21:22:23 -06:00
thinkyhead	4f2b7271bd	[cron] Bump distribution date (2024-03-04)	2024-03-04 00:21:13 +00:00
fredycpu	ec6f9dd5c8	🔧 MKS_ROBIN_PRO : I2C EEPROM + MKS Wifi (#26823 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-03-03 12:39:50 -06:00
thinkyhead	e6cda9932b	[cron] Bump distribution date (2024-03-02)	2024-03-02 06:06:49 +00:00
Keith Bennett	b9cfbaa8d4	✅ Update Actions versions (#26814 )	2024-03-01 22:34:12 -06:00
ellensp	3fd175af8e	🚸 M115 "KINEMATICS:…" (#26806 )	2024-03-01 22:31:42 -06:00
Keith Bennett	a9e72b2a2c	🔧 Simpler CREALITY_V422 warning (#26826 )	2024-03-01 22:09:12 -06:00
ellensp	ecde3a3158	🩹 Fix AVR bootscreen RLE decode (#26827 )	2024-03-01 21:58:56 -06:00
DerAndere	c8d51c2723	🚸 Enable G92.9 with rotational axes (#26174 ) - Supporting axes that can rotate forever.	2024-03-01 21:16:39 -06:00
thinkyhead	d609bb4671	[cron] Bump distribution date (2024-02-28)	2024-02-28 06:06:10 +00:00
Scott Lahteine	982b425792	🔥 Drop TMC26X support (#26770 )	2024-02-27 20:45:34 -06:00
thinkyhead	9e879a5b1f	[cron] Bump distribution date (2024-02-11)	2024-02-11 00:22:45 +00:00
ellensp	9974327d33	extend uart checks	2024-02-11 03:28:37 +13:00
thinkyhead	4eba643ae1	[cron] Bump distribution date (2024-02-10)	2024-02-10 06:17:34 +00:00
Scott Lahteine	8d7be79108	👷 Improve BIGTREE_GTR_V1_0 tests	2024-02-09 19:14:15 -06:00
Scott Lahteine	76b5688304	🚸 Optional encoder multipliers	2024-02-09 19:14:15 -06:00
thinkyhead	1e8fbb7bbb	[cron] Bump distribution date (2024-02-09)	2024-02-09 00:20:11 +00:00
Scott Lahteine	20c6a6233b	🧑‍💻 HC32 endstop interrupts for X2/Y2/Z4	2024-02-08 16:49:13 -06:00
Scott Lahteine	1d295f7983	🔥 Clean up SCARA/TPARA	2024-02-07 23:45:51 -06:00
Scott Lahteine	669814d0d4	✨ MARLIN_SMALL_BUILD option (#26775 )	2024-02-07 23:40:54 -06:00
Scott Lahteine	4aa48beb37	🚸 Adjust encoder multiplier	2024-02-07 19:48:36 -06:00
thinkyhead	371fb5a256	[cron] Bump distribution date (2024-02-08)	2024-02-08 00:20:32 +00:00
Scott Lahteine	0829a511f0	🧑‍💻 "static_warning"	2024-02-07 18:09:36 -06:00
Scott Lahteine	a3c78c4510	🎨 Delete old FTDI Eve bootscreen	2024-02-07 14:01:25 -06:00
Scott Lahteine	a3211253a0	🩹 Fix FTDI Eve Touch UI M84	2024-02-07 13:58:49 -06:00
thinkyhead	2c8e7bd5a5	[cron] Bump distribution date (2024-02-07)	2024-02-07 12:07:15 +00:00
ellensp	005d6879d9	🔧 Restore probe XY edit defaults, remove arbitrary Z limit (#26774 )	2024-02-07 00:33:54 -06:00
thinkyhead	3dd22349a9	[cron] Bump distribution date (2024-02-06)	2024-02-06 06:06:16 +00:00
Scott Mikutsky	e61a84a717	🚸 Keep Filament Change near the top (#26172 )	2024-02-05 23:37:29 -06:00
thinkyhead	d8e73d3036	[cron] Bump distribution date (2024-02-05)	2024-02-05 00:21:40 +00:00
Robherc	b12340b1d5	🔧 Fix extraneous DIAG warnings (#26694 )	2024-02-04 16:10:11 -06:00
Scott Lahteine	ec46a59539	🧑‍💻 Fix uncrustify config	2024-02-04 16:07:27 -06:00
Keith Bennett	5003681414	🩹 Fix HOTEND_IDLE_TIMEOUT with no heated bed (#26746 )	2024-02-04 12:14:49 -06:00
Keith Bennett	d9396929aa	🩹 Update BTT GTR v1.0 DIAG jumper/pin (#26764 )	2024-02-04 12:13:03 -06:00
Scott Lahteine	1dee4d92c6	🔧 TOUCH_IDLE_SLEEP_MINS => DISPLAY_SLEEP_MINUTES Follow up to #26517	2024-02-04 12:09:48 -06:00
Smokey Pell	9364cbb4b5	🚸 Tronxy V10 w/ TFT_TRONXY_X5SA + MKS_ROBIN_TFT43 (#26747 )	2024-02-04 09:37:32 -06:00
Taylor Talkington	755b661c2d	🔧 Fix USE_Z_MIN conditions (#26762 )	2024-02-04 09:03:08 -06:00
thinkyhead	7f4792e47c	[cron] Bump distribution date (2024-02-04)	2024-02-04 00:22:42 +00:00
Keith Bennett	e6837b2b8d	🩹 Fix STM32 HW Serial 6 (#26763 ) Followup to #26328	2024-02-03 17:19:19 -06:00
thinkyhead	9e21330d7a	[cron] Bump distribution date (2024-02-03)	2024-02-03 00:20:49 +00:00
Davide Rombolà	c476e62a6f	🩹 Fix STM32 HW Serial (#26531 ) Followup to #26328	2024-02-01 19:31:39 -06:00
thinkyhead	4c5d7831c1	[cron] Bump distribution date (2024-02-02)	2024-02-02 00:20:22 +00:00
Abdullah YILMAZ	9a5cfb3f26	🌐 Turkish language update (#26739 )	2024-01-31 20:11:08 -06:00
InsanityAutomation	5a87bea762	🚸 Fix repeating "Power Off" message (#26755 )	2024-01-31 19:24:08 -06:00
thinkyhead	d62f45bdc1	[cron] Bump distribution date (2024-02-01)	2024-02-01 00:21:39 +00:00
ellensp	f9d5ee04b4	🩹 Patch STM32 serial UUID (#26737 ) Followup to #26715 Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-31 12:33:42 -06:00
thinkyhead	ef04680cc5	[cron] Bump distribution date (2024-01-31)	2024-01-31 06:06:35 +00:00
Keith Bennett	1c6cfc3ffe	🐛 Fix I/J/K chopper timing (#26736 ) Followup to #19112	2024-01-30 23:00:02 -06:00
Keith Bennett	0266e7fe53	📝 Biqu => BIQU (#26735 )	2024-01-30 22:58:06 -06:00
ellensp	610ea0a9d3	🔨 No strlcpy in Windows (#26748 )	2024-01-30 22:56:46 -06:00
thinkyhead	70d942a184	[cron] Bump distribution date (2024-01-30)	2024-01-30 06:06:23 +00:00
Scott Lahteine	5639237e2b	🎨 Misc. cleanup 29-01	2024-01-29 23:10:12 -06:00
thinkyhead	541bd26cd7	[cron] Bump distribution date (2024-01-29)	2024-01-29 00:21:02 +00:00
Keith Bennett	7a4d601f4d	🩹 Temp constraints followup (#26744 ) Followup to `cb291e8d`	2024-01-28 16:13:23 -06:00
thinkyhead	bf8675b44a	[cron] Bump distribution date (2024-01-28)	2024-01-28 00:22:35 +00:00
Scott Lahteine	ebea672240	🐛 Protect EEPROM bytes 916-926 Followup to #26729 Ender-3S1 STM32F401 Bootloader	2024-01-27 11:49:57 -06:00
Scott Lahteine	ce8535f01c	🧑‍💻 Fix warning, adjust tests	2024-01-27 11:49:57 -06:00
thinkyhead	0ba4cd2b3b	[cron] Bump distribution date (2024-01-27)	2024-01-27 00:19:36 +00:00
Scott Lahteine	afc2dd6cab	🎨 Misc. cleanup 25-01	2024-01-25 22:09:19 -06:00
Scott Lahteine	5768b42c39	Add Conditionals_type.h	2024-01-25 22:06:09 -06:00
thinkyhead	ee8630c282	[cron] Bump distribution date (2024-01-26)	2024-01-26 00:42:39 +00:00
Miguel Risco-Castillo	01094ea6aa	✨🔨 EEPROM exclusion zone (#26729 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-25 18:18:49 -06:00
qwertymodo	6c1fd1f69c	🩹 Fix single Neo strip M150 K (#26709 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-25 18:16:32 -06:00
sargonphin	4f65466161	🔧 HYBRID_THRESHOLD sanity checks (#26681 )	2024-01-25 18:13:18 -06:00
ellensp	9b3119393f	🩹 Followup to EDITABLE_STEPS_PER_UNIT (#26677 ) Followup to #26618	2024-01-25 17:39:09 -06:00
ejhoness	8594e9462c	✏️ Fix draw_dialog.cpp typo (#26684 )	2024-01-25 17:37:35 -06:00
Cesar Guillermo Montiel	16acb57b22	✨ Creality v2.4.S4_170 (Ender 2 Pro, HC32F460KCTA) (#26730 )	2024-01-25 17:12:49 -06:00
Scott Lahteine	04c8a3138e	🎨 Misc. LCD pins comments	2024-01-25 15:07:48 -06:00
engrenage	38560378fc	🔧 Allow float Z_PROBE_LOW_POINT (#26711 )	2024-01-25 14:31:39 -06:00
Scott Lahteine	ffbf4a6a90	🩹 Fix IA Creality IDEX case	2024-01-25 14:31:39 -06:00
thinkyhead	a215bc2ca3	[cron] Bump distribution date (2024-01-25)	2024-01-25 00:28:09 +00:00
minding-myown-business	cbc674ff99	📝 Fix dead LCD link (#26669 )	2024-01-24 18:24:25 -06:00
ellensp	97546bf55b	🚸 PLR recover chamber temp (#26696 )	2024-01-24 14:33:02 -06:00
Vovodroid	ed1391ee5d	🔧 Wrap POWER_LOSS_RETRACT_LEN (#26695 )	2024-01-24 14:21:00 -06:00
Keith Bennett	7fbd9ec5f4	🔧 Allow RAMPS FAN1_PIN override (#26725 )	2024-01-24 12:55:59 -06:00
Keith Bennett	63989023b8	🔧 Update SKR_MINI_SCREEN_ADAPTER error (#26726 )	2024-01-24 12:54:37 -06:00
ellensp	e668d5afd7	🔧 STM32 UID followup (#26727 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-24 12:50:48 -06:00
thinkyhead	a2228276bb	[cron] Bump distribution date (2024-01-24)	2024-01-24 00:22:20 +00:00
Scott Lahteine	3ef192e7c7	🎨 Cosmetic cleanup 23-01	2024-01-23 16:05:41 -06:00
Scott Lahteine	5fea79fd07	🔧 Fix ROTATIONAL_AXIS_GANG Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>	2024-01-23 16:02:33 -06:00
Scott Lahteine	18e65f5eb4	🩹 Fix _U and other conflicts Fix #26220	2024-01-23 15:55:13 -06:00
Scott Lahteine	5ed6bf65ba	🔧 Allow for no STOP pin Co-Authored-By: DerAndere <26200979+DerAndere1@users.noreply.github.com>	2024-01-23 15:44:51 -06:00
DerAndere	d79bcef802	🔧 Sanity check Z_CLEARANCE_FOR_HOMING (#26721 )	2024-01-23 14:09:31 -06:00
Anson Liu	f1a53407e7	🚸 DOGM active extruder indicator (#26152 )	2024-01-23 10:24:49 -06:00
Scott Lahteine	4309e6ab76	🧑‍💻 Fix build_all_examples	2024-01-22 23:58:17 -06:00
thinkyhead	0c3d1cf566	[cron] Bump distribution date (2024-01-23)	2024-01-23 00:50:39 +00:00
Scott Lahteine	aa7d571486	♻️ LCD pins migration precursor (#26719 ) Preliminary changes for #25650	2024-01-22 17:32:01 -06:00
Scott Lahteine	604d3e8fad	🎨 Move EXIT_M303	2024-01-22 16:38:08 -06:00
Scott Lahteine	22fc07d72b	🧑‍💻 ExtUI::onPlayTone optional duration	2024-01-22 00:04:08 -06:00
Scott Lahteine	dd3b5a10a0	Misc. aesthetic adjustments Co-Authored-By: Andrew <18502096+classicrocker883@users.noreply.github.com>	2024-01-21 22:15:16 -06:00
thinkyhead	416f94f03a	[cron] Bump distribution date (2024-01-22)	2024-01-22 00:23:03 +00:00
Keith Bennett	204de723f1	✨ BIQU MicroProbe (#26527 )	2024-01-21 06:01:25 -06:00
Vovodroid	80cd89d8f7	🩹 Fix M592 report (#26680 )	2024-01-21 05:11:03 -06:00
ellensp	624226c91d	🩹 Fix STM32 CPU serial UUID (#26715 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-21 05:09:36 -06:00
Keith Bennett	3adf73a2cd	🔥 Remove ALLOW_LOW_EJERK (#26712 )	2024-01-20 23:47:26 -06:00
thinkyhead	eb7b207e4c	[cron] Bump distribution date (2024-01-21)	2024-01-21 00:24:10 +00:00
ellensp	d7e45367af	🔨 Fix POLAR build (#26687 )	2024-01-20 00:24:30 -06:00
thinkyhead	388c7018c4	[cron] Bump distribution date (2024-01-20)	2024-01-20 00:21:13 +00:00
Vovodroid	da96607b65	🔧 Adjust DEFAULT_EJERK settings (#26665 )	2024-01-19 16:38:25 -06:00
ellensp	fb49645b32	📝 Fix Anet pins typo (#26660 )	2024-01-19 13:49:35 -06:00
German Borisov	7d751a20b1	✨ Status Screen flow adjustment (#26627 )	2024-01-19 13:17:36 -06:00
thinkyhead	9f7d5bbc86	[cron] Bump distribution date (2024-01-19)	2024-01-19 00:22:09 +00:00
Abdullah YILMAZ	0df25b1008	🌐 Update Turkish language (#26676 )	2024-01-18 18:00:43 -06:00
engrenage	cef623b7d2	🔧 Clarify M600 sanity-check (#26702 )	2024-01-18 17:57:46 -06:00
Andrew	12434e78e4	🔨 Improve CMakeLists.txt (#26700 )	2024-01-18 17:55:37 -06:00
thinkyhead	2200607989	[cron] Bump distribution date (2024-01-17)	2024-01-17 06:06:41 +00:00
Scott Lahteine	c31381183b	✨ Minor Orca update Followup to #26534	2024-01-16 23:15:04 -06:00
thinkyhead	76dce41580	[cron] Bump distribution date (2024-01-16)	2024-01-16 06:06:41 +00:00
Scott Lahteine	1f1ca34ea6	🧑‍💻 Tweak limit_and_warn	2024-01-15 22:22:08 -06:00
Scott Lahteine	8d4ab15748	🧑‍💻 Tweak planner debug	2024-01-15 21:36:15 -06:00
thinkyhead	745577693d	[cron] Bump distribution date (2024-01-15)	2024-01-15 00:22:58 +00:00
Scott Lahteine	3019af1c93	🔨 Make / pins-format patches	2024-01-13 18:34:12 -06:00
thinkyhead	8916e6f826	[cron] Bump distribution date (2024-01-14)	2024-01-14 00:24:03 +00:00
Robherc	b2fd631d82	🔧 Fix SD connection defaults (#26666 ) Co-authored-by: thisiskeithb <13375512+thisiskeithb@users.noreply.github.com> Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-12 22:03:34 -06:00
thinkyhead	cadef64418	[cron] Bump distribution date (2024-01-13)	2024-01-13 00:21:34 +00:00
ThomasToka	ab3497161a	🐛 Fix PLR pos/sdpos (#26365 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-11 23:56:45 -06:00
thinkyhead	46f370ae3c	[cron] Bump distribution date (2024-01-12)	2024-01-12 00:21:50 +00:00
Scott Lahteine	0f43ac79f6	⏪️ Revert encoder changes Reverts #26501	2024-01-10 18:25:17 -06:00
thinkyhead	ef92b6c369	[cron] Bump distribution date (2024-01-11)	2024-01-11 00:21:50 +00:00
Scott Lahteine	f44f9eb9f8	🎨 Misc. style adjustments	2024-01-10 14:49:28 -06:00
plampix	854f3315af	✨ EDITABLE_STEPS_PER_UNIT (#26618 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-10 00:33:54 -06:00
Vovodroid	1d46e67de2	✨ PLR_BED_THRESHOLD (#26649 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-09 23:13:10 -06:00
Scott Lahteine	85ded0b9bd	🩹 Clarify servo µs min/max	2024-01-09 22:41:54 -06:00
Scott Lahteine	cb291e8d00	🩹 Fix some temp constraints	2024-01-09 22:41:00 -06:00
ellensp	25caae1e8c	🩹 Fix PID / MPC tune background tasks (#26652 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-09 20:55:20 -06:00
Scott Lahteine	12d7995a18	🎨 Minor temp / UI refactor	2024-01-09 18:45:17 -06:00
thinkyhead	320b7a9ac3	[cron] Bump distribution date (2024-01-10)	2024-01-10 00:21:58 +00:00
Vovodroid	a533e9e637	🩹 Fix edit Z jerk step size (#26650 ) Followup to #25514 Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-09 15:42:08 -06:00
ellensp	f6ecdae972	🔧 Base NUM_SERVO_PLUGS on SERVO PINS (#26640 ) Co-authored-by: Scott Lahteine <thinkyhead@users.noreply.github.com>	2024-01-09 15:19:47 -06:00