Bump to 2.0.5

Requires Octoprint 1.3.11

.circleci/config.yml

@@ -1,275 +0,0 @@
-# Python CircleCI 2.0 configuration file
-#
-# Check https://circleci.com/docs/2.0/language-python/ for more details
-#
-version: 2
-jobs:
-  build:
-    docker:
-      # specify the version you desire here
-      # use `-browsers` prefix for selenium tests, e.g. `3.6.1-browsers`
-      - image: circleci/python:2.7.13
-
-      # Specify service dependencies here if necessary
-      # CircleCI maintains a library of pre-built images
-      # documented at https://circleci.com/docs/2.0/circleci-images/
-      # - image: circleci/postgres:9.4
-    environment:
-      TEST_PLATFORM: "-e megaatmega2560"
-
-    working_directory: ~/Marlin
-
-    steps:
-      - checkout
-
-      - restore_cache:
-          paths:
-          - ~/.platformio
-          - ~/Marlin/.piolibdeps
-          keys:
-          - v1-dependencies-{{ checksum "~/Marlin/platformio.ini" }}
-          # fallback to using the latest cache if no exact match is found
-          - v1-dependencies-
-
-      - run:
-          name: install dependencies
-          command: |
-            sudo pip install -U platformio
-
-      # run tests!
-      - run:
-          name: run tests
-          command: |
-            #
-            #
-            # Fetch the tag information for the current branch
-            ls -la
-            git fetch origin --tags
-            #
-            # Publish the buildroot script folder
-            chmod +x buildroot/bin/*
-            export PATH=`pwd`/buildroot/bin/:${PATH}
-
-            # Generate custom version include
-            generate_version ./Marlin/src/inc
-            cat ./Marlin/src/inc/_Version.h
-            #
-            # Backup pins_RAMPS.h
-            #
-            cp Marlin/src/pins/pins_RAMPS.h Marlin/src/pins/pins_RAMPS.h.backup
-            #
-
-            env_backup
-
-            #################################
-            # Build all sample configurations
-            #################################
-
-            echo testing megaatmega2560 targets...
-            export TEST_PLATFORM="-e megaatmega2560"
-            echo use_example_configs adafruit/ST7565
-            use_example_configs adafruit/ST7565
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs BQ/Hephestos
-            use_example_configs BQ/Hephestos
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs BQ/Hephestos_2
-            use_example_configs BQ/Hephestos_2
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs BQ/WITBOX
-            use_example_configs BQ/WITBOX
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs AliExpress/CL-260
-            use_example_configs AliExpress/CL-260
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            #echo use_example_configs Cartesio
-            #use_example_configs Cartesio
-            #build_marlin_pio ./ ${TEST_PLATFORM}
-            #restore_configs
-            echo use_example_configs delta/FLSUN/auto_calibrate
-            use_example_configs delta/FLSUN/auto_calibrate
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs delta/FLSUN/kossel_mini
-            use_example_configs delta/FLSUN/kossel_mini
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs delta/generic
-            use_example_configs delta/generic
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs delta/kossel_mini
-            use_example_configs delta/kossel_mini
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs delta/kossel_xl
-            use_example_configs delta/kossel_xl
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Felix
-            use_example_configs Felix
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Felix/DUAL
-            use_example_configs Felix/DUAL
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs FolgerTech/i3-2020
-            use_example_configs FolgerTech/i3-2020
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs gCreate/gMax1.5+
-            use_example_configs gCreate/gMax1.5+
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Geeetech/GT2560
-            use_example_configs Geeetech/GT2560
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            #echo use_example_configs Geeetech/I3_Pro_X-GT2560
-            #use_example_configs Geeetech/I3_Pro_X-GT2560
-            #build_marlin_pio ./ ${TEST_PLATFORM}
-            #restore_configs
-            echo use_example_configs Infitary/i3-M508
-            use_example_configs Infitary/i3-M508
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            use_example_configs Malyan/M200
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Micromake/C1/basic
-            use_example_configs Micromake/C1/basic
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Micromake/C1/enhanced
-            use_example_configs Micromake/C1/enhanced
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs RepRapWorld/Megatronics
-            use_example_configs RepRapWorld/Megatronics
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs RigidBot
-            use_example_configs RigidBot
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs SCARA
-            use_example_configs SCARA
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Velleman/K8200
-            use_example_configs Velleman/K8200
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Velleman/K8400/Dual-head
-            use_example_configs Velleman/K8400/Dual-head
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Velleman/K8400
-            use_example_configs Velleman/K8400
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Wanhao/Duplicator6
-            use_example_configs Wanhao/Duplicator6
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            # Requires manual load of https://github.com/stawel/SlowSoftI2CMaster
-            #use_example_configs wt150
-            #build_marlin_pio ./ ${TEST_PLATFORM}
-            #restore_configs
-            echo testing melzi targets...
-            export TEST_PLATFORM="-e melzi"
-            echo use_example_configs Anet/A6
-            use_example_configs Anet/A6
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Anet/A8
-            use_example_configs Anet/A8
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Creality/CR-10
-            use_example_configs Creality/CR-10
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Malyan/M150
-            use_example_configs Malyan/M150
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs Sanguinololu
-            use_example_configs Sanguinololu
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs TinyBoy2
-            use_example_configs TinyBoy2
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-
-            echo testing rambo targets...
-            export TEST_PLATFORM="-e rambo"
-            echo use_example_configs AlephObjects/TAZ4
-            use_example_configs AlephObjects/TAZ4
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-
-            echo testing at90usb1286_* targets...
-            export TEST_PLATFORM="-e at90usb1286_dfu"
-            #echo se_example_configs delta/kossel_pro
-            #use_example_configs delta/kossel_pro
-            #build_marlin_pio ./ ${TEST_PLATFORM}
-            #restore_configs
-            echo use_example_configs makibox
-            use_example_configs makibox
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-
-            echo testing sanguino_atmega644p targets...
-            export TEST_PLATFORM="-e sanguino_atmega644p"
-            echo use_example_configs tvrrug/Round2
-            use_example_configs tvrrug/Round2
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-
-            echo testing LPC1768 targets...
-            export TEST_PLATFORM="-e LPC1768"
-            echo use_example_configs Mks/Sbase
-            use_example_configs Mks/Sbase
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo testing STM32F1 targets...
-            export TEST_PLATFORM="-e STM32F1"
-            restore_configs
-            echo use_example_configs STM32F10
-            use_example_configs STM32F10
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-            echo use_example_configs stm32f103ret6
-            use_example_configs stm32f103ret6
-            build_marlin_pio ./ ${TEST_PLATFORM}
-            restore_configs
-
-            echo testing DUE targets...
-            export TEST_PLATFORM="-e DUE"
-            #echo use_example_configs UltiMachine/Archim2
-            #use_example_configs UltiMachine/Archim2
-            #build_marlin_pio ./ ${TEST_PLATFORM}
-            #restore_configs
-
-            #
-            # Remove temp files from dependencies tree prior to caching
-            rm -rf ~/Marlin/.piolibdeps/_tmp_*
-
-            #
-            # Restore the environment
-            #
-            env_restore
-
-      - save_cache:
-          paths:
-          - ~/.platformio
-          - ~/Marlin/.piolibdeps
-          key: v1-dependencies-{{ checksum "~/Marlin/platformio.ini" }}

.github/FUNDING.yml

@@ -0,0 +1,3 @@
+github: [thinkyhead]
+patreon: thinkyhead
+custom: ["http://www.thinkyhead.com/donate-to-marlin"]

.github/issue_template.md

@@ -1,8 +1,8 @@
 <!--
 
-Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/master/.github/code_of_conduct.md
+Have you read Marlin's Code of Conduct? By filing an Issue, you are expected to comply with it, including treating everyone with respect: https://github.com/MarlinFirmware/Marlin/blob/bugfix-2.0.x/.github/code_of_conduct.md
 
-Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/.
+Do you want to ask a question? Are you looking for support? Please don't post here. Instead please use the Marlin Firmware forum at http://forums.reprap.org/list.php?415 or the Marlin Facebook Group https://www.facebook.com/groups/1049718498464482/ or the Marlin Discord Server https://discord.gg/n5NJ59y.
 
 Before filing an issue be sure to test the 1.1 and/or 2.0 "bugfix" branches to see whether the issue is already addressed.
 

.github/workflows/test-builds.yml

@@ -0,0 +1,104 @@
+#
+# test-builds.yml
+# Do test builds to catch compile errors
+#
+
+name: CI
+
+on:
+  pull_request:
+    branches:
+    - bugfix-2.0.x
+    - dev-2.1.x
+    paths-ignore:
+    - config/**
+    - data/**
+    - docs/**
+    - '**/*.md'
+
+jobs:
+  test_builds:
+
+    runs-on: ubuntu-latest
+
+    strategy:
+      matrix:
+        test-platform:
+        # Base Environments
+
+        - DUE
+        - esp32
+        - linux_native
+        - mega2560
+        - teensy31
+        - teensy35
+        - SAMD51_grandcentral_m4
+
+        # Extended AVR Environments
+
+        - FYSETC_F6_13
+        - mega1280
+        - rambo
+        - sanguino1284p
+        - sanguino644p
+
+        # Extended STM32 Environments
+
+        - STM32F103RC_btt
+        - STM32F103RC_btt_USB
+        - STM32F103RE_btt
+        - STM32F103RE_btt_USB
+        - STM32F103RC_fysetc
+        - jgaurora_a5s_a1
+        - STM32F103VE_longer
+        - STM32F407VE_black
+        - BIGTREE_SKR_PRO
+        - BIGTREE_GTR_V1_0
+        - mks_robin
+        - ARMED
+        - FYSETC_S6
+
+        # Put lengthy tests last
+
+        - LPC1768
+        - LPC1769
+
+        # STM32 with non-STM framework. both broken for now. they should use HAL_STM32 which is working.
+
+        #- STM32F4
+        #- STM32F7
+
+        # Non-working environment tests
+
+        #- BIGTREE_BTT002
+        #- at90usb1286_cdc
+        #- at90usb1286_dfu
+        #- STM32F103CB_malyan
+        #- mks_robin_lite
+        #- mks_robin_mini
+        #- mks_robin_nano
+
+    steps:
+
+    - name: Select Python 3.7
+      uses: actions/setup-python@v1
+      with:
+        python-version: '3.7' # Version range or exact version of a Python version to use, using semvers version range syntax.
+        architecture: 'x64' # optional x64 or x86. Defaults to x64 if not specified
+
+    - name: Install PlatformIO
+      run: |
+        pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+        platformio update
+
+    - name: Check out the PR
+      uses: actions/checkout@v2
+
+    - name: Run ${{ matrix.test-platform }} Tests
+      run: |
+        # Inline tests script
+        [[ "$GITHUB_REPOSITORY" == "MarlinFirmware/Marlin" ]] || exit 0
+        chmod +x buildroot/bin/*
+        chmod +x buildroot/share/tests/*
+        export PATH=./buildroot/bin/:./buildroot/share/tests/:${PATH}
+        run_tests . ${{ matrix.test-platform }}

.travis.yml

@@ -0,0 +1,51 @@
+dist: bionic
+sudo: false
+
+language: python
+python:
+  - "3.7"
+
+notifications:
+  email: false
+
+env:
+  - TEST_PLATFORM="megaatmega2560"
+  - TEST_PLATFORM="DUE"
+  - TEST_PLATFORM="LPC1768"
+  - TEST_PLATFORM="LPC1769"
+  - TEST_PLATFORM="STM32F1"
+  - TEST_PLATFORM="teensy31"
+  - TEST_PLATFORM="teensy35"
+  - TEST_PLATFORM="linux_native"
+  - TEST_PLATFORM="esp32"
+  - TEST_PLATFORM="alfawise_U20"
+  - TEST_PLATFORM="black_stm32f407ve"
+  - TEST_PLATFORM="adafruit_grandcentral_m4"
+
+before_install:
+  #
+  # Fetch the tag information for the current branch
+  - git fetch origin --tags
+  #
+  # Publish the buildroot script folder
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/bin/*
+  - chmod +x ${TRAVIS_BUILD_DIR}/buildroot/share/tests/*
+  - export PATH=${TRAVIS_BUILD_DIR}/buildroot/bin/:${TRAVIS_BUILD_DIR}/buildroot/share/tests/:${PATH}
+
+install:
+  #- pip install -U platformio
+  - pip install -U https://github.com/platformio/platformio-core/archive/master.zip
+
+before_script:
+  # Update PlatformIO packages
+  - platformio update
+  #
+  # Change current working directory to the build dir
+  - cd ${TRAVIS_BUILD_DIR}
+  #
+  # Generate custom version include
+  - generate_version ${TRAVIS_BUILD_DIR}/Marlin/src/inc
+  - cat ${TRAVIS_BUILD_DIR}/Marlin/src/inc/_Version.h
+  #
+script:
+  - run_tests ${TRAVIS_BUILD_DIR} ${TEST_PLATFORM}

Marlin/Configuration.h

@@ -1,31 +1,8 @@
-//#define PetsfangMicroswiss
-#define BondtechBMG
-//#define CR10SPro_GearedExtruder
-//#define E3DV6
-#define Mosquito
-
-//#define FilamentSensorStd
-//#define FilamentSensorLerdge
-#define FilamentEncoder
-
-//#define STOCK_2208 // V2 Stock Board with TMC2208 Drivers
-//#define SKR13 // 32 bit board - assumes 2208 drivers
-//#define SKR14
-#define SKR14Turbo
-#define SKR_2209
-//#define E_8825
-#define SKR_UART // Configure SKR board with drivers in UART mode
-
-//#define SX2 // Small formfactor 200mm machine
-
-#define DUAL_Z
-#define GRAPHICSLCD
+#define DUAL
+#define ABL_BLTouch
 #define UBL
+#define GraphicLCD
 
-
-#if ANY(SKR13, SKR14, SKR14Turbo)
-  #define SKRLPCBoard
-#endif
 /**
  * Marlin 3D Printer Firmware
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
@@ -49,9 +26,6 @@
  */
 #pragma once
 
-#if DISABLED(SKRLPCBoard)
-  #define Y_STOP_PIN 14
-#endif
 /**
  * Configuration.h
  *
@@ -102,8 +76,8 @@
 // @section info
 
 // Author info of this build printed to the host during boot and M115
-#define STRING_CONFIG_H_AUTHOR "Tinymachines3D" // Who made the changes.
-#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
+#define STRING_CONFIG_H_AUTHOR "Insanity Automation" // Who made the changes.
+//#define CUSTOM_VERSION_FILE Version.h // Path from the root directory (no quotes)
 
 /**
  * *** VENDORS PLEASE READ ***
@@ -119,19 +93,17 @@
 // Show the Marlin bootscreen on startup. ** ENABLE FOR PRODUCTION **
 #define SHOW_BOOTSCREEN
 
-#if ENABLED(GRAPHICSLCD)
 // Show the bitmap in Marlin/_Bootscreen.h on startup.
-#define SHOW_CUSTOM_BOOTSCREEN
+//#define SHOW_CUSTOM_BOOTSCREEN
 
 // Show the bitmap in Marlin/_Statusscreen.h on the status screen.
-#define CUSTOM_STATUS_SCREEN_IMAGE
-#endif
+//#define CUSTOM_STATUS_SCREEN_IMAGE
+
 // @section machine
 
 /**
  * Select the serial port on the board to use for communication with the host.
  * This allows the connection of wireless adapters (for instance) to non-default port pins.
- * Serial port -1 is the USB emulated serial port, if available.
  * Note: The first serial port (-1 or 0) will always be used by the Arduino bootloader.
  *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
@@ -140,11 +112,13 @@
 
 /**
  * Select a secondary serial port on the board to use for communication with the host.
+ * This allows the connection of wireless adapters (for instance) to non-default port pins.
+ * Serial port -1 is the USB emulated serial port, if available.
+ *
  * :[-1, 0, 1, 2, 3, 4, 5, 6, 7]
  */
-#if ENABLED(SKRLPCBoard)
-  #define SERIAL_PORT_2 -1
-#endif
+//#define SERIAL_PORT_2 -1
+
 /**
  * This setting determines the communication speed of the printer.
  *
@@ -161,24 +135,11 @@
 
 // Choose the name from boards.h that matches your setup
 #ifndef MOTHERBOARD
-  #if ENABLED(SKR13)
-    #define MOTHERBOARD BOARD_BTT_SKR_V1_3
-  #elif ENABLED(SKR14)
-    #define MOTHERBOARD BOARD_BTT_SKR_V1_4
-  #elif ENABLED(SKR14Turbo)
-    #define MOTHERBOARD BOARD_BTT_SKR_V1_4_TURBO
-  #else
-    #define MOTHERBOARD BOARD_RAMPS_14_EFB
-  #endif
+  #define MOTHERBOARD BOARD_RUMBA_RAISE3D
 #endif
 
 // Name displayed in the LCD "Ready" message and Info menu
-#if ENABLED(SX2)
-    #define CUSTOM_MACHINE_NAME "TM3D SX2"
-  #else
-    #define CUSTOM_MACHINE_NAME "TM3D SX4"
-#endif
-
+//#define CUSTOM_MACHINE_NAME "R3D N2+ Dual"
 
 // Printer's unique ID, used by some programs to differentiate between machines.
 // Choose your own or use a service like http://www.uuidgenerator.net/version4
@@ -188,7 +149,11 @@
 
 // This defines the number of extruders
 // :[1, 2, 3, 4, 5, 6, 7, 8]
-#define EXTRUDERS 1
+#if ENABLED(DUAL)
+  #define EXTRUDERS 2
+#else
+ #define EXTRUDERS 1
+#endif
 
 // Generally expected filament diameter (1.75, 2.85, 3.0, ...). Used for Volumetric, Filament Width Sensor, etc.
 #define DEFAULT_NOMINAL_FILAMENT_DIA 1.75
@@ -196,13 +161,6 @@
 // For Cyclops or any "multi-extruder" that shares a single nozzle.
 //#define SINGLENOZZLE
 
-// Save and restore temperature and fan speed on tool-change.
-// Set standby for the unselected tool with M104/106/109 T...
-#if ENABLED(SINGLENOZZLE)
-  //#define SINGLENOZZLE_STANDBY_TEMP
-  //#define SINGLENOZZLE_STANDBY_FAN
-#endif
-
 /**
  * Průša MK2 Single Nozzle Multi-Material Multiplexer, and variants.
  *
@@ -414,7 +372,6 @@
  *   331 : (3.3V scaled thermistor 1 table for MEGA)
  *   332 : (3.3V scaled thermistor 1 table for DUE)
  *     2 : 200k thermistor - ATC Semitec 204GT-2 (4.7k pullup)
- *   202 : 200k thermistor - Copymaster 3D
  *     3 : Mendel-parts thermistor (4.7k pullup)
  *     4 : 10k thermistor !! do not use it for a hotend. It gives bad resolution at high temp. !!
  *     5 : 100K thermistor - ATC Semitec 104GT-2/104NT-4-R025H42G (Used in ParCan & J-Head) (4.7k pullup)
@@ -459,21 +416,19 @@
  *   998 : Dummy Table that ALWAYS reads 25°C or the temperature defined below.
  *   999 : Dummy Table that ALWAYS reads 100°C or the temperature defined below.
  */
-#if ENABLED(Mosquito)
-  #define TEMP_SENSOR_0 67
-#elif ENABLED(E3DV6)
-  #define TEMP_SENSOR_0 5
+#define TEMP_SENSOR_0 -1
+#if ENABLED(DUAL)
+  #define TEMP_SENSOR_1 -1
 #else
-  #define TEMP_SENSOR_0 1
+  #define TEMP_SENSOR_1 0
 #endif
-#define TEMP_SENSOR_1 0
 #define TEMP_SENSOR_2 0
 #define TEMP_SENSOR_3 0
 #define TEMP_SENSOR_4 0
 #define TEMP_SENSOR_5 0
 #define TEMP_SENSOR_6 0
 #define TEMP_SENSOR_7 0
-#define TEMP_SENSOR_BED 11
+#define TEMP_SENSOR_BED 8
 #define TEMP_SENSOR_PROBE 0
 #define TEMP_SENSOR_CHAMBER 0
 
@@ -486,9 +441,9 @@
 //#define TEMP_SENSOR_1_AS_REDUNDANT
 #define MAX_REDUNDANT_TEMP_SENSOR_DIFF 10
 
-#define TEMP_RESIDENCY_TIME     10  // (seconds) Time to wait for hotend to "settle" in M109
-#define TEMP_WINDOW              1  // (°C) Temperature proximity for the "temperature reached" timer
-#define TEMP_HYSTERESIS          3  // (°C) Temperature proximity considered "close enough" to the target
+#define TEMP_RESIDENCY_TIME      3  // (seconds) Time to wait for hotend to "settle" in M109
+#define TEMP_WINDOW              3  // (°C) Temperature proximity for the "temperature reached" timer
+#define TEMP_HYSTERESIS          5  // (°C) Temperature proximity considered "close enough" to the target
 
 #define TEMP_BED_RESIDENCY_TIME 10  // (seconds) Time to wait for bed to "settle" in M190
 #define TEMP_BED_WINDOW          1  // (°C) Temperature proximity for the "temperature reached" timer
@@ -509,15 +464,15 @@
 // Above this temperature the heater will be switched off.
 // This can protect components from overheating, but NOT from shorts and failures.
 // (Use MINTEMP for thermistor short/failure protection.)
-#define HEATER_0_MAXTEMP 305
-#define HEATER_1_MAXTEMP 275
+#define HEATER_0_MAXTEMP 370
+#define HEATER_1_MAXTEMP 370
 #define HEATER_2_MAXTEMP 275
 #define HEATER_3_MAXTEMP 275
 #define HEATER_4_MAXTEMP 275
 #define HEATER_5_MAXTEMP 275
 #define HEATER_6_MAXTEMP 275
 #define HEATER_7_MAXTEMP 275
-#define BED_MAXTEMP      125
+#define BED_MAXTEMP      150
 
 //===========================================================================
 //============================= PID Settings ================================
@@ -542,16 +497,11 @@
 
   // If you are using a pre-configured hotend then you can use one of the value sets by uncommenting it
 
-  // Ultimaker
-  #if ENABLED(PetsfangMicroswiss)
-    #define DEFAULT_Kp 18.74
-    #define DEFAULT_Ki 0.71
-    #define DEFAULT_Kd 123.56
-  #else
-    #define DEFAULT_Kp 10.59
-    #define DEFAULT_Ki 0.37
-    #define DEFAULT_Kd 75.24
-  #endif
+// N series KS version
+     #define  DEFAULT_Kp 14.49
+    #define  DEFAULT_Ki 0.8
+    #define  DEFAULT_Kd 65.52
+
   // MakerGear
   //#define DEFAULT_Kp 7.0
   //#define DEFAULT_Ki 0.1
@@ -581,7 +531,7 @@
  * heater. If your configuration is significantly different than this and you don't understand
  * the issues involved, don't use bed PID until someone else verifies that your hardware works.
  */
-//#define PIDTEMPBED
+#define PIDTEMPBED
 
 //#define BED_LIMIT_SWITCHING
 
@@ -629,7 +579,7 @@
  * Note: For Bowden Extruders make this large enough to allow load/unload.
  */
 #define PREVENT_LENGTHY_EXTRUDE
-#define EXTRUDE_MAXLENGTH 200
+#define EXTRUDE_MAXLENGTH 75
 
 //===========================================================================
 //======================== Thermal Runaway Protection =======================
@@ -660,7 +610,7 @@
 
 // Uncomment one of these options to enable CoreXY, CoreXZ, or CoreYZ kinematics
 // either in the usual order or reversed
-#define COREXY
+//#define COREXY
 //#define COREXZ
 //#define COREYZ
 //#define COREYX
@@ -677,10 +627,10 @@
 // Almost all printers will be using one per axis. Probes will use one or more of the
 // extra connectors. Leave undefined any used for non-endstop and non-probe purposes.
 #define USE_XMIN_PLUG
-//#define USE_YMIN_PLUG
+#define USE_YMIN_PLUG
 #define USE_ZMIN_PLUG
 //#define USE_XMAX_PLUG
-#define USE_YMAX_PLUG
+//#define USE_YMAX_PLUG
 //#define USE_ZMAX_PLUG
 
 // Enable pullup for all endstops to prevent a floating state
@@ -716,7 +666,7 @@
 #define X_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
 #define Y_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
 #define Z_MAX_ENDSTOP_INVERTING true // set to true to invert the logic of the endstop.
-#define Z_MIN_PROBE_ENDSTOP_INVERTING false // set to true to invert the logic of the probe.
+#define Z_MIN_PROBE_ENDSTOP_INVERTING true // set to true to invert the logic of the probe.
 
 /**
  * Stepper Drivers
@@ -734,64 +684,16 @@
  *          TMC5130, TMC5130_STANDALONE, TMC5160, TMC5160_STANDALONE
  * :['A4988', 'A5984', 'DRV8825', 'LV8729', 'L6470', 'L6474', 'POWERSTEP01', 'TB6560', 'TB6600', 'TMC2100', 'TMC2130', 'TMC2130_STANDALONE', 'TMC2160', 'TMC2160_STANDALONE', 'TMC2208', 'TMC2208_STANDALONE', 'TMC2209', 'TMC2209_STANDALONE', 'TMC26X', 'TMC26X_STANDALONE', 'TMC2660', 'TMC2660_STANDALONE', 'TMC5130', 'TMC5130_STANDALONE', 'TMC5160', 'TMC5160_STANDALONE']
  */
-
-#if ENABLED(SKRLPCBoard, E_8825)
-  #define E0_DRIVER_TYPE DRV8825
-  #define E1_DRIVER_TYPE DRV8825
-#endif
-
-#if ANY(SKRLPCBoard, STOCK_2208) && DISABLED(SKR_UART)
-  #if ENABLED(SKR_2209)
-    #define X_DRIVER_TYPE  TMC2209_STANDALONE
-    #define Y_DRIVER_TYPE  TMC2209_STANDALONE
-    #define Z_DRIVER_TYPE  TMC2209_STANDALONE
-    #define Z2_DRIVER_TYPE TMC2209_STANDALONE
-    #if DISABLED(E_8825)
-      #define E0_DRIVER_TYPE TMC2209_STANDALONE
-      #define E1_DRIVER_TYPE TMC2209_STANDALONE
-    #endif
-  #else
-    #define X_DRIVER_TYPE  TMC2208_STANDALONE
-    #define Y_DRIVER_TYPE  TMC2208_STANDALONE
-    #define Z_DRIVER_TYPE  TMC2208_STANDALONE
-    #define Z2_DRIVER_TYPE TMC2208_STANDALONE
-    #if DISABLED(E_8825)
-      #define E0_DRIVER_TYPE TMC2208_STANDALONE
-      #define E1_DRIVER_TYPE TMC2208_STANDALONE
-    #endif
-  #endif
-#elif ENABLED(SKRLPCBoard, SKR_UART)
-  #if ENABLED(SKR_2209)
-    #define X_DRIVER_TYPE  TMC2209
-    #define Y_DRIVER_TYPE  TMC2209
-    #define Z_DRIVER_TYPE  TMC2209
-    #define Z2_DRIVER_TYPE TMC2209
-    #if DISABLED(E_8825)
-      #define E0_DRIVER_TYPE TMC2209
-      #define E1_DRIVER_TYPE TMC2209
-    #endif
-  #else
-    #define X_DRIVER_TYPE  TMC2208
-    #define Y_DRIVER_TYPE  TMC2208
-    #define Z_DRIVER_TYPE  TMC2208
-    #define Z2_DRIVER_TYPE TMC2208
-    #if DISABLED(E_8825)
-      #define E0_DRIVER_TYPE TMC2208
-      #define E1_DRIVER_TYPE TMC2208
-    #endif
-  #endif
-#else
-  #define X_DRIVER_TYPE  A4988
-  #define Y_DRIVER_TYPE  A4988
-  #define Z_DRIVER_TYPE  A4988
-  #define Z2_DRIVER_TYPE A4988
-  #define E0_DRIVER_TYPE A4988
-  #define E1_DRIVER_TYPE A4988
-#endif
+#define X_DRIVER_TYPE  DRV8825
+#define Y_DRIVER_TYPE  DRV8825
+#define Z_DRIVER_TYPE  DRV8825
 //#define X2_DRIVER_TYPE A4988
 //#define Y2_DRIVER_TYPE A4988
+//#define Z2_DRIVER_TYPE A4988
 //#define Z3_DRIVER_TYPE A4988
 //#define Z4_DRIVER_TYPE A4988
+//#define E0_DRIVER_TYPE A4988
+//#define E1_DRIVER_TYPE A4988
 //#define E2_DRIVER_TYPE A4988
 //#define E3_DRIVER_TYPE A4988
 //#define E4_DRIVER_TYPE A4988
@@ -815,7 +717,7 @@
  *
  * :[2,3,4,5,6,7]
  */
-#define ENDSTOP_NOISE_THRESHOLD 2
+//#define ENDSTOP_NOISE_THRESHOLD 2
 
 //=============================================================================
 //============================== Movement Settings ============================
@@ -835,33 +737,25 @@
  * following movement settings. If fewer factors are given than the
  * total number of extruders, the last value applies to the rest.
  */
-//#define DISTINCT_E_FACTORS
+#define DISTINCT_E_FACTORS
 
 /**
  * Default Axis Steps Per Unit (steps/mm)
  * Override with M92
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#if ENABLED(BondtechBMG)
-  #define EStepsmm 415
-#elif ENABLED(CR10SPro_GearedExtruder)
-  #define EStepsmm 140
-#else
-  #define EStepsmm 100.3
-#endif
+#define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 800, 94, 94 }
 
-
-  #define DEFAULT_AXIS_STEPS_PER_UNIT   { 80, 80, 400, EStepsmm }
 /**
  * Default Max Feed Rate (mm/s)
  * Override with M203
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_FEEDRATE          { 500, 500, 5, 70 }
+#define DEFAULT_MAX_FEEDRATE          { 300, 300, 5, 65 }
 
-#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
+//#define LIMITED_MAX_FR_EDITING        // Limit edit via M203 or LCD to DEFAULT_MAX_FEEDRATE * 2
 #if ENABLED(LIMITED_MAX_FR_EDITING)
-  #define MAX_FEEDRATE_EDIT_VALUES    { 1000, 1000, 10, 150 } // ...or, set your own edit limits
+  #define MAX_FEEDRATE_EDIT_VALUES    { 600, 600, 10, 50 } // ...or, set your own edit limits
 #endif
 
 /**
@@ -870,11 +764,11 @@
  * Override with M201
  *                                      X, Y, Z, E0 [, E1[, E2...]]
  */
-#define DEFAULT_MAX_ACCELERATION      { 1500, 1500, 50, 2000 }
+#define DEFAULT_MAX_ACCELERATION      { 9000, 9000, 100, 10000 }
 
-#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
+//#define LIMITED_MAX_ACCEL_EDITING     // Limit edit via M201 or LCD to DEFAULT_MAX_ACCELERATION * 2
 #if ENABLED(LIMITED_MAX_ACCEL_EDITING)
-  #define MAX_ACCEL_EDIT_VALUES       { 2500, 2500, 125, 5000 } // ...or, set your own edit limits
+  #define MAX_ACCEL_EDIT_VALUES       { 6000, 6000, 200, 20000 } // ...or, set your own edit limits
 #endif
 
 /**
@@ -885,9 +779,9 @@
  *   M204 R    Retract Acceleration
  *   M204 T    Travel Acceleration
  */
-#define DEFAULT_ACCELERATION          1000    // X, Y, Z and E acceleration for printing moves
-#define DEFAULT_RETRACT_ACCELERATION  1500    // E acceleration for retracts
-#define DEFAULT_TRAVEL_ACCELERATION   1000    // X, Y, Z acceleration for travel (non printing) moves
+#define DEFAULT_ACCELERATION          3000    // X, Y, Z and E acceleration for printing moves
+#define DEFAULT_RETRACT_ACCELERATION  3000    // E acceleration for retracts
+#define DEFAULT_TRAVEL_ACCELERATION   3000    // X, Y, Z acceleration for travel (non printing) moves
 
 /**
  * Default Jerk limits (mm/s)
@@ -897,7 +791,7 @@
  * When changing speed and direction, if the difference is less than the
  * value set here, it may happen instantaneously.
  */
-#define CLASSIC_JERK
+//#define CLASSIC_JERK
 #if ENABLED(CLASSIC_JERK)
   #define DEFAULT_XJERK 10.0
   #define DEFAULT_YJERK 10.0
@@ -1004,7 +898,9 @@
 /**
  * The BLTouch probe uses a Hall effect sensor and emulates a servo.
  */
-#define BLTOUCH
+#if ENABLED(ABL_BLTouch)
+  #define BLTOUCH
+#endif
 
 /**
  * Touch-MI Probe by hotends.fr
@@ -1076,26 +972,14 @@
  *
  * Specify a Probe position as { X, Y, Z }
  */
-#if ENABLED(PetsfangMicroswiss)
-  #define NOZZLE_TO_PROBE_OFFSET { -42, -5, 0 }
-#elif ENABLED(E3DV6)
-  #define NOZZLE_TO_PROBE_OFFSET { 36, 15, 0 }
-#elif ENABLED(Mosquito)
-  #define NOZZLE_TO_PROBE_OFFSET { 0, 26, 0 }
-#else
-  #define NOZZLE_TO_PROBE_OFFSET { 37, -10, 0 }
-#endif
+#define NOZZLE_TO_PROBE_OFFSET { 10, 10, 0 }
 
 // Most probes should stay away from the edges of the bed, but
 // with NOZZLE_AS_PROBE this can be negative for a wider probing area.
-#if ENABLED(Mosquito)
-  #define MIN_PROBE_EDGE 5
-#else
-  #define MIN_PROBE_EDGE 5
-#endif
+#define MIN_PROBE_EDGE 10
 
 // X and Y axis travel speed (mm/m) between probes
-#define XY_PROBE_SPEED 5000
+#define XY_PROBE_SPEED 8000
 
 // Feedrate (mm/m) for the first approach when double-probing (MULTIPLE_PROBING == 2)
 #define Z_PROBE_SPEED_FAST HOMING_FEEDRATE_Z
@@ -1129,19 +1013,19 @@
  * Example: `M851 Z-5` with a CLEARANCE of 4  =>  9mm from bed to nozzle.
  *     But: `M851 Z+1` with a CLEARANCE of 2  =>  2mm from bed to nozzle.
  */
-#define Z_CLEARANCE_DEPLOY_PROBE   10 // Z Clearance for Deploy/Stow
+#define Z_CLEARANCE_DEPLOY_PROBE   7 // Z Clearance for Deploy/Stow
 #define Z_CLEARANCE_BETWEEN_PROBES  5 // Z Clearance between probe points
 #define Z_CLEARANCE_MULTI_PROBE     5 // Z Clearance between multiple probes
-//#define Z_AFTER_PROBING           5 // Z position after probing is done
+#define Z_AFTER_PROBING           5 // Z position after probing is done
 
 #define Z_PROBE_LOW_POINT          -3 // Farthest distance below the trigger-point to go before stopping
 
 // For M851 give a range for adjusting the Z probe offset
-#define Z_PROBE_OFFSET_RANGE_MIN -9
-#define Z_PROBE_OFFSET_RANGE_MAX 9
+#define Z_PROBE_OFFSET_RANGE_MIN -20
+#define Z_PROBE_OFFSET_RANGE_MAX 20
 
 // Enable the M48 repeatability test to test probe accuracy
-//#define Z_MIN_PROBE_REPEATABILITY_TEST
+#define Z_MIN_PROBE_REPEATABILITY_TEST
 
 // Before deploy/stow pause for user confirmation
 //#define PAUSE_BEFORE_DEPLOY_STOW
@@ -1188,24 +1072,14 @@
 // @section machine
 
 // Invert the stepper direction. Change (or reverse the motor connector) if an axis goes the wrong way.
-#if ANY(SKRLPCBoard, STOCK_2208)
-  #define INVERT_X_DIR true
-  #define INVERT_Y_DIR true
-  #define INVERT_Z_DIR true
-#else
-  #define INVERT_X_DIR false
-  #define INVERT_Y_DIR false
-  #define INVERT_Z_DIR false
-#endif
+#define INVERT_X_DIR false
+#define INVERT_Y_DIR false
+#define INVERT_Z_DIR false
 
 // @section extruder
 
 // For direct drive extruder v9 set to true, for geared extruder set to false.
-#if (ENABLED(BondtechBMG, CR10SPro_GearedExtruder) && DISABLED(SKRLPCBoard)) || (DISABLED(BondtechBM, CR10SPro_GearedExtruderG) && ANY(SKRLPCBoard, STOCK_2208))
-  #define INVERT_E0_DIR true
-#else
-  #define INVERT_E0_DIR false
-#endif
+#define INVERT_E0_DIR false
 #define INVERT_E1_DIR false
 #define INVERT_E2_DIR false
 #define INVERT_E3_DIR false
@@ -1228,30 +1102,14 @@
 // Direction of endstops when homing; 1=MAX, -1=MIN
 // :[-1,1]
 #define X_HOME_DIR -1
-#define Y_HOME_DIR  1
+#define Y_HOME_DIR -1
 #define Z_HOME_DIR -1
 
 // @section machine
 
 // The size of the print bed
- #if ENABLED(Mosquito)
-  #define XCarriageModifier 10
-  #define YCarriageModifier 35
- #elif ENABLED(PetsfangMicroswiss)
-  #define XCarriageModifier 10
-  #define YCarriageModifier 10
-#else
-  #define XCarriageModifier 0
-  #define YCarriageModifier 0
-#endif
-
-#if ENABLED(SX2)
-  #define X_BED_SIZE 248 - XCarriageModifier
-  #define Y_BED_SIZE 238 - YCarriageModifier
-#else
-  #define X_BED_SIZE 398 - XCarriageModifier
-  #define Y_BED_SIZE 390 - YCarriageModifier
-#endif
+#define X_BED_SIZE 305
+#define Y_BED_SIZE 305
 
 // Travel limits (mm) after homing, corresponding to endstop positions.
 #define X_MIN_POS 0
@@ -1259,11 +1117,8 @@
 #define Z_MIN_POS 0
 #define X_MAX_POS X_BED_SIZE
 #define Y_MAX_POS Y_BED_SIZE
-#if DISABLED(SX2)
-  #define Z_MAX_POS 500
-#else
-  #define Z_MAX_POS 250
-#endif
+#define Z_MAX_POS 610
+
 /**
  * Software Endstops
  *
@@ -1290,7 +1145,7 @@
 #endif
 
 #if EITHER(MIN_SOFTWARE_ENDSTOPS, MAX_SOFTWARE_ENDSTOPS)
-  //#define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
+  #define SOFT_ENDSTOPS_MENU_ITEM  // Enable/Disable software endstops from the LCD
 #endif
 
 /**
@@ -1301,23 +1156,13 @@
  * For other boards you may need to define FIL_RUNOUT_PIN, FIL_RUNOUT2_PIN, etc.
  * By default the firmware assumes HIGH=FILAMENT PRESENT.
  */
- #if ANY(FilamentSensorStd, FilamentSensorLerdge, FilamentEncoder)
-  #define FILAMENT_RUNOUT_SENSOR
-#endif
+//#define FILAMENT_RUNOUT_SENSOR
 #if ENABLED(FILAMENT_RUNOUT_SENSOR)
-
-#define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
- #if ENABLED(FilamentSensorLerdge)
-   #define FIL_RUNOUT_INVERTING false // set to true to invert the logic of the sensor.
- #else
-   #define FIL_RUNOUT_INVERTING true // set to true to invert the logic of the sensor.
- #endif
+  #define NUM_RUNOUT_SENSORS   1     // Number of sensors, up to one per extruder. Define a FIL_RUNOUT#_PIN for each.
+  #define FIL_RUNOUT_INVERTING false // Set to true to invert the logic of the sensor.
   #define FIL_RUNOUT_PULLUP          // Use internal pullup for filament runout pins.
   //#define FIL_RUNOUT_PULLDOWN      // Use internal pulldown for filament runout pins.
 
-  #if DISABLED(SKRLPCBoard)
-    #define FIL_RUNOUT_PIN 2
-  #endif
   // Set one or more commands to execute on filament runout.
   // (After 'M412 H' Marlin will ask the host to handle the process.)
   #define FILAMENT_RUNOUT_SCRIPT "M600"
@@ -1325,19 +1170,13 @@
   // After a runout is detected, continue printing this length of filament
   // before executing the runout script. Useful for a sensor at the end of
   // a feed tube. Requires 4 bytes SRAM per sensor, plus 4 bytes overhead.
-  #if ENABLED(FilamentEncoder)
-    #define FILAMENT_RUNOUT_DISTANCE_MM 15
-  #else
-    #define FILAMENT_RUNOUT_DISTANCE_MM 5
-  #endif
+  //#define FILAMENT_RUNOUT_DISTANCE_MM 25
 
   #ifdef FILAMENT_RUNOUT_DISTANCE_MM
     // Enable this option to use an encoder disc that toggles the runout pin
     // as the filament moves. (Be sure to set FILAMENT_RUNOUT_DISTANCE_MM
     // large enough to avoid false positives.)
-    #if ENABLED(FilamentEncoder)
-      #define FILAMENT_MOTION_SENSOR
-    #endif
+    //#define FILAMENT_MOTION_SENSOR
   #endif
 #endif
 
@@ -1381,9 +1220,8 @@
  */
 //#define AUTO_BED_LEVELING_3POINT
 //#define AUTO_BED_LEVELING_LINEAR
-#if DISABLED(UBL)
-  #define AUTO_BED_LEVELING_BILINEAR
-#else
+//#define AUTO_BED_LEVELING_BILINEAR
+#if ENABLED(UBL)
   #define AUTO_BED_LEVELING_UBL
 #endif
 //#define MESH_BED_LEVELING
@@ -1431,11 +1269,7 @@
 #if EITHER(AUTO_BED_LEVELING_LINEAR, AUTO_BED_LEVELING_BILINEAR)
 
   // Set the number of grid points per dimension.
-  #if ENABLED(SX2)
-    #define GRID_MAX_POINTS_X 5
-  #else
-    #define GRID_MAX_POINTS_X 10
-  #endif
+  #define GRID_MAX_POINTS_X 3
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   // Probe along the Y axis, advancing X after each column
@@ -1467,14 +1301,14 @@
 
   //#define MESH_EDIT_GFX_OVERLAY   // Display a graphics overlay while editing the mesh
 
-  #define MESH_INSET 1              // Set Mesh bounds as an inset region of the bed
+  #define MESH_INSET 3              // Set Mesh bounds as an inset region of the bed
   #define GRID_MAX_POINTS_X 10      // Don't use more than 15 points per axis, implementation limited.
   #define GRID_MAX_POINTS_Y GRID_MAX_POINTS_X
 
   #define UBL_MESH_EDIT_MOVES_Z     // Sophisticated users prefer no movement of nozzle
   #define UBL_SAVE_ACTIVE_ON_M500   // Save the currently active mesh in the current slot on M500
 
-  //#define UBL_Z_RAISE_WHEN_OFF_MESH 2.5 // When the nozzle is off the mesh, this value is used
+  #define UBL_Z_RAISE_WHEN_OFF_MESH 0.0 // When the nozzle is off the mesh, this value is used
                                           // as the Z-Height correction value.
 
 #elif ENABLED(MESH_BED_LEVELING)
@@ -1495,12 +1329,12 @@
  * Add a bed leveling sub-menu for ABL or MBL.
  * Include a guided procedure if manual probing is enabled.
  */
-#define LCD_BED_LEVELING
+//#define LCD_BED_LEVELING
 
 #if ENABLED(LCD_BED_LEVELING)
   #define MESH_EDIT_Z_STEP  0.025 // (mm) Step size while manually probing Z axis.
   #define LCD_PROBE_Z_RANGE 4     // (mm) Z Range centered on Z_MIN_POS for LCD Z adjustment
-  #define MESH_EDIT_MENU        // Add a menu to edit mesh points
+  //#define MESH_EDIT_MENU        // Add a menu to edit mesh points
 #endif
 
 // Add a menu item to move between bed corners for manual bed adjustment
@@ -1510,7 +1344,7 @@
   #define LEVEL_CORNERS_INSET_LFRB { 30, 30, 30, 30 } // (mm) Left, Front, Right, Back insets
   #define LEVEL_CORNERS_HEIGHT      0.0   // (mm) Z height of nozzle at leveling points
   #define LEVEL_CORNERS_Z_HOP       4.0   // (mm) Z height of nozzle between leveling points
-  #define LEVEL_CENTER_TOO              // Move to the center after the last corner
+  //#define LEVEL_CENTER_TOO              // Move to the center after the last corner
 #endif
 
 /**
@@ -1548,8 +1382,8 @@
 #endif
 
 // Homing speeds (mm/m)
-#define HOMING_FEEDRATE_XY 6000
-#define HOMING_FEEDRATE_Z  360
+#define HOMING_FEEDRATE_XY (50*60)
+#define HOMING_FEEDRATE_Z  (4*60)
 
 // Validate that endstops are triggered on homing moves
 #define VALIDATE_HOMING_ENDSTOPS
@@ -1629,7 +1463,6 @@
 #define EEPROM_SETTINGS     // Persistent storage with M500 and M501
 //#define DISABLE_M503        // Saves ~2700 bytes of PROGMEM. Disable for release!
 #define EEPROM_CHITCHAT       // Give feedback on EEPROM commands. Disable to save PROGMEM.
-#define EEPROM_BOOT_SILENT    // Keep M503 quiet and only give errors during first load
 #if ENABLED(EEPROM_SETTINGS)
   #define EEPROM_AUTO_INIT  // Init EEPROM automatically on any errors.
 #endif
@@ -1681,13 +1514,10 @@
 #define NOZZLE_PARK_FEATURE
 
 #if ENABLED(NOZZLE_PARK_FEATURE)
-  // Specify a park position as { X, Y, Z_raise }
-  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 30), 10 }
-  //#define NOZZLE_PARK_X_ONLY          // X move only is required to park
-  //#define NOZZLE_PARK_Y_ONLY          // Y move only is required to park
-  #define NOZZLE_PARK_Z_RAISE_MIN   2   // (mm) Always raise Z by at least this distance
-  #define NOZZLE_PARK_XY_FEEDRATE 100   // (mm/s) X and Y axes feedrate (also used for delta Z axis)
-  #define NOZZLE_PARK_Z_FEEDRATE 5      // (mm/s) Z axis feedrate (not used for delta printers)
+  // Specify a park position as { X, Y, Z }
+  #define NOZZLE_PARK_POINT { (X_MIN_POS + 10), (Y_MIN_POS + 10), 10 }
+  #define NOZZLE_PARK_XY_FEEDRATE 100   // X and Y axes feedrate in mm/s (also used for delta printers Z axis)
+  #define NOZZLE_PARK_Z_FEEDRATE 5      // Z axis feedrate in mm/s (not used for delta printers)
 #endif
 
 /**
@@ -1785,7 +1615,7 @@
  *
  * View the current statistics with M78.
  */
-#define PRINTCOUNTER
+//#define PRINTCOUNTER
 
 //=============================================================================
 //============================= LCD and SD support ============================
@@ -1852,7 +1682,7 @@
  * This may be required to resolve "volume init" errors.
  */
 //#define SPI_SPEED SPI_HALF_SPEED
-#define SPI_SPEED SPI_QUARTER_SPEED
+//#define SPI_SPEED SPI_QUARTER_SPEED
 //#define SPI_SPEED SPI_EIGHTH_SPEED
 
 /**
@@ -1931,7 +1761,7 @@
 // If you have a speaker that can produce tones, enable it here.
 // By default Marlin assumes you have a buzzer with a fixed frequency.
 //
-//#define SPEAKER
+#define SPEAKER
 
 //
 // The duration and frequency for the UI feedback sound.
@@ -1954,9 +1784,7 @@
 //
 // Note: Usually sold with a white PCB.
 //
-#if DISABLED(GRAPHICSLCD)
-  #define REPRAP_DISCOUNT_SMART_CONTROLLER
-#endif
+//#define REPRAP_DISCOUNT_SMART_CONTROLLER
 
 //
 // Original RADDS LCD Display+Encoder+SDCardReader
@@ -2096,10 +1924,9 @@
 // RepRapDiscount FULL GRAPHIC Smart Controller
 // http://reprap.org/wiki/RepRapDiscount_Full_Graphic_Smart_Controller
 //
-#if ENABLED(GRAPHICSLCD)
+#if ENABLED(GraphicLCD)
   #define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
 #endif
-
 //
 // ReprapWorld Graphical LCD
 // https://reprapworld.com/?products_details&products_id/1218

Marlin/Configuration_adv.h

@@ -149,7 +149,7 @@
  * THERMAL_PROTECTION_HYSTERESIS and/or THERMAL_PROTECTION_PERIOD
  */
 #if ENABLED(THERMAL_PROTECTION_HOTENDS)
-  #define THERMAL_PROTECTION_PERIOD 120        // Seconds
+  #define THERMAL_PROTECTION_PERIOD 40        // Seconds
   #define THERMAL_PROTECTION_HYSTERESIS 10     // Degrees Celsius
 
   #define ADAPTIVE_FAN_SLOWING              // Slow part cooling fan if temperature drops
@@ -169,22 +169,22 @@
    * and/or decrease WATCH_TEMP_INCREASE. WATCH_TEMP_INCREASE should not be set
    * below 2.
    */
-  #define WATCH_TEMP_PERIOD 120                // Seconds
-  #define WATCH_TEMP_INCREASE 4               // Degrees Celsius
+  #define WATCH_TEMP_PERIOD 20                // Seconds
+  #define WATCH_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
 /**
  * Thermal Protection parameters for the bed are just as above for hotends.
  */
 #if ENABLED(THERMAL_PROTECTION_BED)
-  #define THERMAL_PROTECTION_BED_PERIOD 240    // Seconds
-  #define THERMAL_PROTECTION_BED_HYSTERESIS 4 // Degrees Celsius
+  #define THERMAL_PROTECTION_BED_PERIOD 20    // Seconds
+  #define THERMAL_PROTECTION_BED_HYSTERESIS 2 // Degrees Celsius
 
   /**
    * As described above, except for the bed (M140/M190/M303).
    */
-  #define WATCH_BED_TEMP_PERIOD 240                // Seconds
-  #define WATCH_BED_TEMP_INCREASE 4               // Degrees Celsius
+  #define WATCH_BED_TEMP_PERIOD 60                // Seconds
+  #define WATCH_BED_TEMP_INCREASE 2               // Degrees Celsius
 #endif
 
 /**
@@ -338,22 +338,15 @@
  * Controller Fan
  * To cool down the stepper drivers and MOSFETs.
  *
- * The fan turns on automatically whenever any driver is enabled and turns
- * off (or reduces to idle speed) shortly after drivers are turned off.
- *
+ * The fan will turn on automatically whenever any stepper is enabled
+ * and turn off after a set period after all steppers are turned off.
  */
 //#define USE_CONTROLLER_FAN
 #if ENABLED(USE_CONTROLLER_FAN)
-  //#define CONTROLLER_FAN_PIN -1        // Set a custom pin for the controller fan
-  //#define CONTROLLER_FAN_USE_Z_ONLY    // With this option only the Z axis is considered
-  #define CONTROLLERFAN_SPEED_MIN      0 // (0-255) Minimum speed. (If set below this value the fan is turned off.)
-  #define CONTROLLERFAN_SPEED_ACTIVE 255 // (0-255) Active speed, used when any motor is enabled
-  #define CONTROLLERFAN_SPEED_IDLE     0 // (0-255) Idle speed, used when motors are disabled
-  #define CONTROLLERFAN_IDLE_TIME     60 // (seconds) Extra time to keep the fan running after disabling motors
-  //#define CONTROLLER_FAN_EDITABLE      // Enable M710 configurable settings
-  #if ENABLED(CONTROLLER_FAN_EDITABLE)
-    #define CONTROLLER_FAN_MENU          // Enable the Controller Fan submenu
-  #endif
+  //#define CONTROLLER_FAN_PIN -1           // Set a custom pin for the controller fan
+  #define CONTROLLERFAN_SECS 60             // Duration in seconds for the fan to run after all motors are disabled
+  #define CONTROLLERFAN_SPEED 255           // 255 == full speed
+  //#define CONTROLLERFAN_SPEED_Z_ONLY 127  // Reduce noise on machines that keep Z enabled
 #endif
 
 // When first starting the main fan, run it at full speed for the
@@ -517,11 +510,8 @@
 //
 // For Z set the number of stepper drivers
 //
-#if ENABLED(DUAL_Z)
-  #define NUM_Z_STEPPER_DRIVERS 2   // (1-4) Z options change based on how many
-#else
-  #define NUM_Z_STEPPER_DRIVERS 1   // (1-4) Z options change based on how many
-#endif
+#define NUM_Z_STEPPER_DRIVERS 1   // (1-4) Z options change based on how many
+
 #if NUM_Z_STEPPER_DRIVERS > 1
   //#define Z_MULTI_ENDSTOPS
   #if ENABLED(Z_MULTI_ENDSTOPS)
@@ -593,24 +583,19 @@
 
 // @section homing
 
-/**
- * Homing Procedure
- * Homing (G28) does an indefinite move towards the endstops to establish
- * the position of the toolhead relative to the workspace.
- */
+// Homing hits each endstop, retracts by these distances, then does a slower bump.
+#define X_HOME_BUMP_MM 5
+#define Y_HOME_BUMP_MM 5
+#define Z_HOME_BUMP_MM 2
+#define HOMING_BUMP_DIVISOR { 2, 2, 4 }  // Re-Bump Speed Divisor (Divides the Homing Feedrate)
+#define QUICK_HOME                     // If homing includes X and Y, do a diagonal move initially
+//#define HOMING_BACKOFF_MM { 2, 2, 2 }  // (mm) Move away from the endstops after homing
 
-//#define SENSORLESS_BACKOFF_MM  { 2, 2 }     // (mm) Backoff from endstops before sensorless homing
+// When G28 is called, this option will make Y home before X
+//#define HOME_Y_BEFORE_X
 
-#define HOMING_BUMP_MM      { 5, 5, 2 }       // (mm) Backoff from endstops after first bump
-#define HOMING_BUMP_DIVISOR { 2, 2, 4 }       // Re-Bump Speed Divisor (Divides the Homing Feedrate)
-
-#define HOMING_BACKOFF_POST_MM { 2, 2, 2 }  // (mm) Backoff from endstops after homing
-
-#define QUICK_HOME                          // If G28 contains XY do a diagonal move first
-//#define HOME_Y_BEFORE_X                     // If G28 contains XY home Y before X
-//#define CODEPENDENT_XY_HOMING               // If X/Y can't home without homing Y/X first
-
-// @section bltouch
+// Enable this if X or Y can't home without homing the other axis first.
+//#define CODEPENDENT_XY_HOMING
 
 #if ENABLED(BLTOUCH)
   /**
@@ -683,9 +668,7 @@
  * Z Steppers Auto-Alignment
  * Add the G34 command to align multiple Z steppers using a bed probe.
  */
-#if ENABLED(DUAL_Z)
-  #define Z_STEPPER_AUTO_ALIGN
-#endif
+//#define Z_STEPPER_AUTO_ALIGN
 #if ENABLED(Z_STEPPER_AUTO_ALIGN)
   // Define probe X and Y positions for Z1, Z2 [, Z3 [, Z4]]
   // If not defined, probe limits will be used.
@@ -731,8 +714,8 @@
   #endif
 
   // On a 300mm bed a 5% grade would give a misalignment of ~1.5cm
-  #define G34_MAX_GRADE              15    // (%) Maximum incline that G34 will handle
-  #define Z_STEPPER_ALIGN_ITERATIONS 8    // Number of iterations to apply during alignment
+  #define G34_MAX_GRADE              5    // (%) Maximum incline that G34 will handle
+  #define Z_STEPPER_ALIGN_ITERATIONS 5    // Number of iterations to apply during alignment
   #define Z_STEPPER_ALIGN_ACC        0.02 // Stop iterating early if the accuracy is better than this
   #define RESTORE_LEVELING_AFTER_G34      // Restore leveling after G34 is done?
   // After G34, re-home Z (G28 Z) or just calculate it from the last probe heights?
@@ -770,23 +753,13 @@
 // Minimum time that a segment needs to take if the buffer is emptied
 #define DEFAULT_MINSEGMENTTIME        20000   // (ms)
 
-// Slow down the machine if the look ahead buffer is (by default) half full.
-// Increase the slowdown divisor for larger buffer sizes.
+// If defined the movements slow down when the look ahead buffer is only half full
 #define SLOWDOWN
-#if ENABLED(SLOWDOWN)
-  #define SLOWDOWN_DIVISOR 2
-#endif
 
-/**
- * XY Frequency limit
- * Reduce resonance by limiting the frequency of small zigzag infill moves.
- * See http://hydraraptor.blogspot.com/2010/12/frequency-limit.html
- * Use M201 F<freq> G<min%> to change limits at runtime.
- */
-//#define XY_FREQUENCY_LIMIT      10 // (Hz) Maximum frequency of small zigzag infill moves. Set with M201 F<hertz>.
-#ifdef XY_FREQUENCY_LIMIT
-  #define XY_FREQUENCY_MIN_PERCENT 5 // (percent) Minimum FR percentage to apply. Set with M201 G<min%>.
-#endif
+// Frequency limit
+// See nophead's blog for more info
+// Not working O
+//#define XY_FREQUENCY_LIMIT  15
 
 // Minimum planner junction speed. Sets the default minimum speed the planner plans for at the end
 // of the buffer and all stops. This should not be much greater than zero and should only be changed
@@ -885,9 +858,8 @@
  * vibration and surface artifacts. The algorithm adapts to provide the best possible step smoothing at the
  * lowest stepping frequencies.
  */
-#if ENABLED(SKRLPCBoard)
-  #define ADAPTIVE_STEP_SMOOTHING
-#endif
+//#define ADAPTIVE_STEP_SMOOTHING
+
 /**
  * Custom Microstepping
  * Override as-needed for your setup. Up to 3 MS pins are supported.
@@ -926,20 +898,9 @@
 //#define DIGIPOT_MOTOR_CURRENT { 135,135,135,135,135 }   // Values 0-255 (RAMBO 135 = ~0.75A, 185 = ~1A)
 //#define DAC_MOTOR_CURRENT_DEFAULT { 70, 80, 90, 80 }    // Default drive percent - X, Y, Z, E axis
 
-/**
- * I2C-based DIGIPOTs (e.g., Azteeg X3 Pro)
- */
-//#define DIGIPOT_MCP4018             // Requires https://github.com/stawel/SlowSoftI2CMaster
-//#define DIGIPOT_MCP4451
-#if EITHER(DIGIPOT_MCP4018, DIGIPOT_MCP4451)
-  #define DIGIPOT_I2C_NUM_CHANNELS 8  // 5DPRINT:4   AZTEEG_X3_PRO:8   MKS_SBASE:5   MIGHTYBOARD_REVE:5
-
-  // Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
-  // These correspond to the physical drivers, so be mindful if the order is changed.
-  #define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 } // AZTEEG_X3_PRO
-
-  //#define DIGIPOT_USE_RAW_VALUES    // Use DIGIPOT_MOTOR_CURRENT raw wiper values (instead of A4988 motor currents)
-
+// Use an I2C based DIGIPOT (e.g., Azteeg X3 Pro)
+//#define DIGIPOT_I2C
+#if ENABLED(DIGIPOT_I2C) && !defined(DIGIPOT_I2C_ADDRESS_A)
   /**
    * Common slave addresses:
    *
@@ -950,10 +911,16 @@
    * AZTEEG_X5_MINI_WIFI         0x58              0x5C        MCP4451
    * MIGHTYBOARD_REVE      0x2F (0x5E)                         MCP4018
    */
-  //#define DIGIPOT_I2C_ADDRESS_A 0x2C  // Unshifted slave address for first DIGIPOT
-  //#define DIGIPOT_I2C_ADDRESS_B 0x2D  // Unshifted slave address for second DIGIPOT
+  #define DIGIPOT_I2C_ADDRESS_A 0x2C  // unshifted slave address for first DIGIPOT
+  #define DIGIPOT_I2C_ADDRESS_B 0x2D  // unshifted slave address for second DIGIPOT
 #endif
 
+//#define DIGIPOT_MCP4018          // Requires library from https://github.com/stawel/SlowSoftI2CMaster
+#define DIGIPOT_I2C_NUM_CHANNELS 8 // 5DPRINT: 4     AZTEEG_X3_PRO: 8     MKS SBASE: 5
+// Actual motor currents in Amps. The number of entries must match DIGIPOT_I2C_NUM_CHANNELS.
+// These correspond to the physical drivers, so be mindful if the order is changed.
+#define DIGIPOT_I2C_MOTOR_CURRENTS { 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0, 1.0 }  //  AZTEEG_X3_PRO
+
 //===========================================================================
 //=============================Additional Features===========================
 //===========================================================================
@@ -1023,7 +990,7 @@
 #define LCD_TIMEOUT_TO_STATUS 15000
 
 // Add an 'M73' G-code to set the current percentage
-#if ENABLED(GRAPHICSLCD)
+#if ENABLED(GraphicLCD)
   #define LCD_SET_PROGRESS_MANUALLY
 #endif
 
@@ -1034,7 +1001,7 @@
   #define BOOTSCREEN_TIMEOUT 2000        // (ms) Total Duration to display the boot screen(s)
 #endif
 
-#if HAS_GRAPHICAL_LCD && EITHER(SDSUPPORT, LCD_SET_PROGRESS_MANUALLY)
+#if HAS_GRAPHICAL_LCD && HAS_PRINT_PROGRESS
   //#define PRINT_PROGRESS_SHOW_DECIMALS // Show progress with decimal digits
   //#define SHOW_REMAINING_TIME          // Display estimated time to completion
   #if ENABLED(SHOW_REMAINING_TIME)
@@ -1058,9 +1025,7 @@
 
   // The standard SD detect circuit reads LOW when media is inserted and HIGH when empty.
   // Enable this option and set to HIGH if your SD cards are incorrectly detected.
-  #define SD_DETECT_STATE HIGH
-
-  #define SD_PROCEDURE_DEPTH 1              // Increase if you need more nested M32 calls
+  //#define SD_DETECT_STATE HIGH
 
   #define SD_FINISHED_STEPPERRELEASE true          // Disable steppers when SD Print is finished
   #define SD_FINISHED_RELEASECOMMAND "M84 X Y Z E" // You might want to keep the Z enabled so your bed stays in place.
@@ -1075,10 +1040,6 @@
 
   #define EVENT_GCODE_SD_STOP "G28XY"       // G-code to run on Stop Print (e.g., "G28XY" or "G27")
 
-  #if ENABLED(PRINTER_EVENT_LEDS)
-    #define PE_LEDS_COMPLETED_TIME  (30*60) // (seconds) Time to keep the LED "done" color before restoring normal illumination
-  #endif
-
   /**
    * Continue after Power-Loss (Creality3D)
    *
@@ -1090,9 +1051,7 @@
    * If the machine reboots when resuming a print you may need to replace or
    * reformat the SD card. (Bad sectors delay startup triggering the watchdog.)
    */
-  #if ENABLED(SKRLPCBoard)
-    #define POWER_LOSS_RECOVERY
-  #endif
+  //#define POWER_LOSS_RECOVERY
   #if ENABLED(POWER_LOSS_RECOVERY)
     #define PLR_ENABLED_DEFAULT   false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
     //#define BACKUP_POWER_SUPPLY       // Backup power / UPS to move the steppers on power loss
@@ -1316,18 +1275,14 @@
   //#define STATUS_ALT_FAN_BITMAP     // Use the alternative fan bitmap
   //#define STATUS_FAN_FRAMES 3       // :[0,1,2,3,4] Number of fan animation frames
   //#define STATUS_HEAT_PERCENT       // Show heating in a progress bar
-  #if DISABLED(SKRLPCBoard)
-    #define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
-  #else
-    #define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
-  #endif
+  #define BOOT_MARLIN_LOGO_SMALL    // Show a smaller Marlin logo on the Boot Screen (saving 399 bytes of flash)
+  //#define BOOT_MARLIN_LOGO_ANIMATED // Animated Marlin logo. Costs ~‭3260 (or ~940) bytes of PROGMEM.
 
   // Frivolous Game Options
-  #if ENABLED(SKRLPCBoard)
-    #define MARLIN_BRICKOUT
-    #define MARLIN_INVADERS
-    #define MARLIN_SNAKE
-  #endif
+  //#define MARLIN_BRICKOUT
+  //#define MARLIN_INVADERS
+  //#define MARLIN_SNAKE
+  //#define GAMES_EASTER_EGG          // Add extra blank lines above the "Games" sub-menu
 
 #endif // HAS_GRAPHICAL_LCD
 
@@ -1506,7 +1461,7 @@
   //#define BABYSTEP_WITHOUT_HOMING
   //#define BABYSTEP_XY                     // Also enable X/Y Babystepping. Not supported on DELTA!
   #define BABYSTEP_INVERT_Z false           // Change if Z babysteps should go the other way
-  #define BABYSTEP_MULTIPLICATOR_Z  10       // Babysteps are very small. Increase for faster motion.
+  #define BABYSTEP_MULTIPLICATOR_Z  1       // Babysteps are very small. Increase for faster motion.
   #define BABYSTEP_MULTIPLICATOR_XY 1
 
   #define DOUBLECLICK_FOR_Z_BABYSTEPPING  // Double-click on the Status Screen for Z Babystepping.
@@ -1524,8 +1479,8 @@
 
   #define BABYSTEP_ZPROBE_OFFSET          // Combine M851 Z and Babystepping
   #if ENABLED(BABYSTEP_ZPROBE_OFFSET)
-    //#define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
-    #if ENABLED(GRAPHICSLCD)
+    #define BABYSTEP_HOTEND_Z_OFFSET      // For multiple hotends, babystep relative Z offsets
+    #if ENABLED(GraphicLCD)
       #define BABYSTEP_ZPROBE_GFX_OVERLAY   // Enable graphical overlay on Z-offset editor
     #endif
   #endif
@@ -1549,9 +1504,7 @@
  * See http://marlinfw.org/docs/features/lin_advance.html for full instructions.
  * Mention @Sebastianv650 on GitHub to alert the author of any issues.
  */
-#if E0_DRIVER_TYPE != TMC2208_STANDALONE
-  #define LIN_ADVANCE
-#endif
+//#define LIN_ADVANCE
 #if ENABLED(LIN_ADVANCE)
   //#define EXTRA_LIN_ADVANCE_K // Enable for second linear advance constants
   #define LIN_ADVANCE_K 0.0    // Unit: mm compression per 1mm/s extruder speed
@@ -1609,9 +1562,7 @@
  * Repeatedly attempt G29 leveling until it succeeds.
  * Stop after G29_MAX_RETRIES attempts.
  */
-#if DISABLED(UBL)
-  #define G29_RETRY_AND_RECOVER
-#endif
+//#define G29_RETRY_AND_RECOVER
 #if ENABLED(G29_RETRY_AND_RECOVER)
   #define G29_MAX_RETRIES 3
   #define G29_HALT_ON_FAILURE
@@ -1620,7 +1571,7 @@
    * between attempts, and after the maximum number of retries have been tried.
    */
   #define G29_SUCCESS_COMMANDS "M117 Bed leveling done."
-  #define G29_RECOVER_COMMANDS "M117 Probe failed.\nG28\n"
+  #define G29_RECOVER_COMMANDS "M117 Probe failed. Rewiping.\nG28\nG12 P0 S12 T0"
   #define G29_FAILURE_COMMANDS "M117 Bed leveling failed.\nG0 Z10\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nM300 P25 S880\nM300 P50 S0\nG4 S1"
 
 #endif
@@ -1638,11 +1589,18 @@
   // Add additional compensation depending on hotend temperature
   // Note: this values cannot be calibrated and have to be set manually
   #if ENABLED(PROBE_TEMP_COMPENSATION)
+    // Max temperature that can be reached by heated bed.
+    // This is required only for the calibration process.
+    #define PTC_MAX_BED_TEMP BED_MAXTEMP
+
     // Park position to wait for probe cooldown
-    #define PTC_PARK_POS   { 0, 0, 100 }
+    #define PTC_PARK_POS_X 0.0F
+    #define PTC_PARK_POS_Y 0.0F
+    #define PTC_PARK_POS_Z 100.0F
 
     // Probe position to probe and wait for probe to reach target temperature
-    #define PTC_PROBE_POS  { 90, 100 }
+    #define PTC_PROBE_POS_X  90.0F
+    #define PTC_PROBE_POS_Y 100.0F
 
     // Enable additional compensation using hotend temperature
     // Note: this values cannot be calibrated automatically but have to be set manually
@@ -1672,7 +1630,7 @@
 #endif
 
 // Support for G5 with XYZE destination and IJPQ offsets. Requires ~2666 bytes.
-#define BEZIER_CURVE_SUPPORT
+//#define BEZIER_CURVE_SUPPORT
 
 /**
  * G38 Probe Target
@@ -1746,8 +1704,8 @@
 
 // The number of linear motions that can be in the plan at any give time.
 // THE BLOCK_BUFFER_SIZE NEEDS TO BE A POWER OF 2 (e.g. 8, 16, 32) because shifts and ors are used to do the ring-buffering.
-#if ENABLED(SKRLPCBoard)
-  #define BLOCK_BUFFER_SIZE 64 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
+#if ENABLED(SDSUPPORT)
+  #define BLOCK_BUFFER_SIZE 16 // SD,LCD,Buttons take more memory, block buffer needs to be smaller
 #else
   #define BLOCK_BUFFER_SIZE 16 // maximize block buffer
 #endif
@@ -1756,12 +1714,10 @@
 
 // The ASCII buffer for serial input
 #define MAX_CMD_SIZE 96
-#if ENABLED(SKRLPCBoard)
-  #define BUFSIZE 32
-#elif BOTH(GRAPHICSLCD, UBL)
+#if DISABLED(GraphicLCD)
   #define BUFSIZE 12
 #else
-  #define BUFSIZE 16
+  #define BUFSIZE 4
 #endif
 
 // Transmission to Host Buffer Size
@@ -1843,7 +1799,7 @@
  * Note that M207 / M208 / M209 settings are saved to EEPROM.
  *
  */
-#define FWRETRACT
+//#define FWRETRACT
 #if ENABLED(FWRETRACT)
   #define FWRETRACT_AUTORETRACT           // Override slicer retractions
   #if ENABLED(FWRETRACT_AUTORETRACT)
@@ -1869,55 +1825,19 @@
  */
 #if EXTRUDERS > 1
   // Z raise distance for tool-change, as needed for some extruders
-  #define TOOLCHANGE_ZRAISE                 2 // (mm)
-  //#define TOOLCHANGE_ZRAISE_BEFORE_RETRACT  // Apply raise before swap retraction (if enabled)
-  //#define TOOLCHANGE_NO_RETURN              // Never return to previous position on tool-change
+  #define TOOLCHANGE_ZRAISE     2  // (mm)
+  #define TOOLCHANGE_NO_RETURN   // Never return to the previous position on tool-change
   #if ENABLED(TOOLCHANGE_NO_RETURN)
-    //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X"   // Extra G-code to run after tool-change
+    //#define EVENT_GCODE_AFTER_TOOLCHANGE "G12X"   // G-code to run after tool-change is complete
   #endif
 
-  /**
-   * Retract and prime filament on tool-change to reduce
-   * ooze and stringing and to get cleaner transitions.
-   */
-  //#define TOOLCHANGE_FILAMENT_SWAP
+  // Retract and prime filament on tool-change
+  #define TOOLCHANGE_FILAMENT_SWAP
   #if ENABLED(TOOLCHANGE_FILAMENT_SWAP)
-    // Load / Unload
-    #define TOOLCHANGE_FS_LENGTH              12  // (mm) Load / Unload length
-    #define TOOLCHANGE_FS_EXTRA_RESUME_LENGTH  0  // (mm) Extra length for better restart, fine tune by LCD/Gcode)
-    #define TOOLCHANGE_FS_RETRACT_SPEED   (50*60) // (mm/m) (Unloading)
-    #define TOOLCHANGE_FS_UNRETRACT_SPEED (25*60) // (mm/m) (On SINGLENOZZLE or Bowden loading must be slowed down)
-
-    // Longer prime to clean out a SINGLENOZZLE
-    #define TOOLCHANGE_FS_EXTRA_PRIME          0  // (mm) Extra priming length
-    #define TOOLCHANGE_FS_PRIME_SPEED    (4.6*60) // (mm/m) Extra priming feedrate
-    #define TOOLCHANGE_FS_WIPE_RETRACT         0  // (mm/m) Retract before cooling for less stringing, better wipe, etc.
-
-    // Cool after prime to reduce stringing
-    #define TOOLCHANGE_FS_FAN                 -1  // Fan index or -1 to skip
-    #define TOOLCHANGE_FS_FAN_SPEED          255  // 0-255
-    #define TOOLCHANGE_FS_FAN_TIME            10  // (seconds)
-
-    // Swap uninitialized extruder with TOOLCHANGE_FS_PRIME_SPEED for all lengths (recover + prime)
-    // (May break filament if not retracted beforehand.)
-    //#define TOOLCHANGE_FS_INIT_BEFORE_SWAP
-
-    // Prime on the first T0 (If other, TOOLCHANGE_FS_INIT_BEFORE_SWAP applied)
-    // Enable it (M217 V[0/1]) before printing, to avoid unwanted priming on host connect
-    //#define TOOLCHANGE_FS_PRIME_FIRST_USED
-
-    /**
-     * Tool Change Migration
-     * This feature provides G-code and LCD options to switch tools mid-print.
-     * All applicable tool properties are migrated so the print can continue.
-     * Tools must be closely matching and other restrictions may apply.
-     * Useful to:
-     *   - Change filament color without interruption
-     *   - Switch spools automatically on filament runout
-     *   - Switch to a different nozzle on an extruder jam
-     */
-    #define TOOLCHANGE_MIGRATION_FEATURE
-
+    #define TOOLCHANGE_FIL_SWAP_LENGTH           3  // (mm)
+    #define TOOLCHANGE_FIL_EXTRA_PRIME           2  // (mm)
+    #define TOOLCHANGE_FIL_SWAP_RETRACT_SPEED 3600  // (mm/m)
+    #define TOOLCHANGE_FIL_SWAP_PRIME_SPEED   3600  // (mm/m)
   #endif
 
   /**
@@ -1928,10 +1848,8 @@
   #if ENABLED(TOOLCHANGE_PARK)
     #define TOOLCHANGE_PARK_XY    { X_MIN_POS + 10, Y_MIN_POS + 10 }
     #define TOOLCHANGE_PARK_XY_FEEDRATE 6000  // (mm/m)
-    //#define TOOLCHANGE_PARK_X_ONLY          // X axis only move
-    //#define TOOLCHANGE_PARK_Y_ONLY          // Y axis only move
   #endif
-#endif // EXTRUDERS > 1
+#endif
 
 /**
  * Advanced Pause
@@ -1946,20 +1864,20 @@
 #define ADVANCED_PAUSE_FEATURE
 #if ENABLED(ADVANCED_PAUSE_FEATURE)
   #define PAUSE_PARK_RETRACT_FEEDRATE         60  // (mm/s) Initial retract feedrate.
-  #define PAUSE_PARK_RETRACT_LENGTH            2  // (mm) Initial retract.
+  #define PAUSE_PARK_RETRACT_LENGTH            4  // (mm) Initial retract.
                                                   // This short retract is done immediately, before parking the nozzle.
   #define FILAMENT_CHANGE_UNLOAD_FEEDRATE     10  // (mm/s) Unload filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_UNLOAD_ACCEL        25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_UNLOAD_LENGTH      100  // (mm) The length of filament for a complete unload.
+  #define FILAMENT_CHANGE_UNLOAD_LENGTH       30  // (mm) The length of filament for a complete unload.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
                                                   //   Set to 0 for manual unloading.
   #define FILAMENT_CHANGE_SLOW_LOAD_FEEDRATE   6  // (mm/s) Slow move when starting load.
-  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     0  // (mm) Slow length, to allow time to insert material.
+  #define FILAMENT_CHANGE_SLOW_LOAD_LENGTH     3  // (mm) Slow length, to allow time to insert material.
                                                   // 0 to disable start loading and skip to fast load only
   #define FILAMENT_CHANGE_FAST_LOAD_FEEDRATE   6  // (mm/s) Load filament feedrate. This can be pretty fast.
   #define FILAMENT_CHANGE_FAST_LOAD_ACCEL     25  // (mm/s^2) Lower acceleration may allow a faster feedrate.
-  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     0  // (mm) Load length of filament, from extruder gear to nozzle.
+  #define FILAMENT_CHANGE_FAST_LOAD_LENGTH     30 // (mm) Load length of filament, from extruder gear to nozzle.
                                                   //   For Bowden, the full length of the tube and nozzle.
                                                   //   For direct drive, the full length of the nozzle.
   //#define ADVANCED_PAUSE_CONTINUOUS_PURGE       // Purge continuously up to the purge length until interrupted.
@@ -1968,7 +1886,7 @@
                                                   //   Set to 0 for manual extrusion.
                                                   //   Filament can be extruded repeatedly from the Filament Change menu
                                                   //   until extrusion is consistent, and to purge old filament.
-  #define ADVANCED_PAUSE_RESUME_PRIME          0  // (mm) Extra distance to prime nozzle after returning from park.
+  #define ADVANCED_PAUSE_RESUME_PRIME          1  // (mm) Extra distance to prime nozzle after returning from park.
   #define ADVANCED_PAUSE_FANS_PAUSE             // Turn off print-cooling fans while the machine is paused.
 
                                                   // Filament Unload does a Retract, Delay, and Purge first:
@@ -1978,7 +1896,7 @@
   #define FILAMENT_UNLOAD_PURGE_FEEDRATE      25  // (mm/s) feedrate to purge before unload
 
   #define PAUSE_PARK_NOZZLE_TIMEOUT           45  // (seconds) Time limit before the nozzle is turned off for safety.
-  #define FILAMENT_CHANGE_ALERT_BEEPS         2  // Number of alert beeps to play when a response is needed.
+  #define FILAMENT_CHANGE_ALERT_BEEPS         10  // Number of alert beeps to play when a response is needed.
   #define PAUSE_PARK_NO_STEPPER_TIMEOUT           // Enable for XYZ steppers to stay powered on during filament change.
 
   #define PARK_HEAD_ON_PAUSE                    // Park the nozzle during pause and filament change.
@@ -2329,7 +2247,7 @@
    * Define you own with
    * { <off_time[1..15]>, <hysteresis_end[-3..12]>, hysteresis_start[1..8] }
    */
-  #define CHOPPER_TIMING CHOPPER_DEFAULT_24V
+  #define CHOPPER_TIMING CHOPPER_DEFAULT_12V
 
   /**
    * Monitor Trinamic drivers for error conditions,
@@ -2357,7 +2275,7 @@
    * STEALTHCHOP_(XY|Z|E) must be enabled to use HYBRID_THRESHOLD.
    * M913 X/Y/Z/E to live tune the setting
    */
-  #define HYBRID_THRESHOLD
+  //#define HYBRID_THRESHOLD
 
   #define X_HYBRID_THRESHOLD     100  // [mm/s]
   #define X2_HYBRID_THRESHOLD    100
@@ -2737,123 +2655,31 @@
   #define SPINDLE_LASER_ACTIVE_HIGH     false  // Set to "true" if the on/off function is active HIGH
   #define SPINDLE_LASER_PWM             true   // Set to "true" if your controller supports setting the speed/power
   #define SPINDLE_LASER_PWM_INVERT      true   // Set to "true" if the speed/power goes up when you want it to go slower
-
-  #define SPINDLE_LASER_FREQUENCY       2500   // (Hz) Spindle/laser frequency (only on supported HALs: AVR and LPC)
-
-  /**
-   * Speed / Power can be set ('M3 S') and displayed in terms of:
-   *  - PWM     (S0 - S255)
-   *  - PERCENT (S0 - S100)
-   *  - RPM     (S0 - S50000)  Best for use with a spindle
-   */
-  #define CUTTER_POWER_DISPLAY PWM
-
-  /**
-   * Relative mode uses relative range (SPEED_POWER_MIN to SPEED_POWER_MAX) instead of normal range (0 to SPEED_POWER_MAX)
-   * Best use with SuperPID router controller where for example S0 = 5,000 RPM and S255 = 30,000 RPM
-   */
-  //#define CUTTER_POWER_RELATIVE              // Set speed proportional to [SPEED_POWER_MIN...SPEED_POWER_MAX] instead of directly
+  #define SPINDLE_LASER_POWERUP_DELAY   5000   // (ms) Delay to allow the spindle/laser to come up to speed/power
+  #define SPINDLE_LASER_POWERDOWN_DELAY 5000   // (ms) Delay to allow the spindle to stop
 
   #if ENABLED(SPINDLE_FEATURE)
     //#define SPINDLE_CHANGE_DIR               // Enable if your spindle controller can change spindle direction
     #define SPINDLE_CHANGE_DIR_STOP            // Enable if the spindle should stop before changing spin direction
     #define SPINDLE_INVERT_DIR          false  // Set to "true" if the spin direction is reversed
 
-    #define SPINDLE_LASER_POWERUP_DELAY   5000 // (ms) Delay to allow the spindle/laser to come up to speed/power
-    #define SPINDLE_LASER_POWERDOWN_DELAY 5000 // (ms) Delay to allow the spindle to stop
-
     /**
-     * M3/M4 uses the following equation to convert speed/power to PWM duty cycle
-     * Power = ((DC / 255 * 100) - SPEED_POWER_INTERCEPT)) * (1 / SPEED_POWER_SLOPE)
-     *   where PWM DC varies from 0 to 255
+     *  The M3 & M4 commands use the following equation to convert PWM duty cycle to speed/power
      *
-     * Set these required parameters for your controller
+     *  SPEED/POWER = PWM duty cycle * SPEED_POWER_SLOPE + SPEED_POWER_INTERCEPT
+     *    where PWM duty cycle varies from 0 to 255
+     *
+     *  set the following for your controller (ALL MUST BE SET)
      */
-    #define SPEED_POWER_SLOPE           118.4  // SPEED_POWER_SLOPE = SPEED_POWER_MAX / 255
-    #define SPEED_POWER_INTERCEPT         0
-    #define SPEED_POWER_MIN            5000
-    #define SPEED_POWER_MAX           30000    // SuperPID router controller 0 - 30,000 RPM
-    #define SPEED_POWER_STARTUP       25000    // The default value for speed power when M3 is called without arguments
-
+    #define SPEED_POWER_SLOPE    118.4
+    #define SPEED_POWER_INTERCEPT  0
+    #define SPEED_POWER_MIN     5000
+    #define SPEED_POWER_MAX    30000    // SuperPID router controller 0 - 30,000 RPM
   #else
-
-    #define SPEED_POWER_SLOPE             0.3922 // SPEED_POWER_SLOPE = SPEED_POWER_MAX / 255
-    #define SPEED_POWER_INTERCEPT         0
-    #define SPEED_POWER_MIN               0
-    #define SPEED_POWER_MAX             100    // 0-100%
-    #define SPEED_POWER_STARTUP          80    // The default value for speed power when M3 is called without arguments
-
-    /**
-     * Enable inline laser power to be handled in the planner / stepper routines.
-     * Inline power is specified by the I (inline) flag in an M3 command (e.g., M3 S20 I)
-     * or by the 'S' parameter in G0/G1/G2/G3 moves (see LASER_MOVE_POWER).
-     *
-     * This allows the laser to keep in perfect sync with the planner and removes
-     * the powerup/down delay since lasers require negligible time.
-     */
-    #define LASER_POWER_INLINE
-
-    #if ENABLED(LASER_POWER_INLINE)
-      /**
-       * Scale the laser's power in proportion to the movement rate.
-       *
-       * - Sets the entry power proportional to the entry speed over the nominal speed.
-       * - Ramps the power up every N steps to approximate the speed trapezoid.
-       * - Due to the limited power resolution this is only approximate.
-       */
-      #define LASER_POWER_INLINE_TRAPEZOID
-
-      /**
-       * Continuously calculate the current power (nominal_power * current_rate / nominal_rate).
-       * Required for accurate power with non-trapezoidal acceleration (e.g., S_CURVE_ACCELERATION).
-       * This is a costly calculation so this option is discouraged on 8-bit AVR boards.
-       *
-       * LASER_POWER_INLINE_TRAPEZOID_CONT_PER defines how many step cycles there are between power updates. If your
-       * board isn't able to generate steps fast enough (and you are using LASER_POWER_INLINE_TRAPEZOID_CONT), increase this.
-       * Note that when this is zero it means it occurs every cycle; 1 means a delay wait one cycle then run, etc.
-       */
-      //#define LASER_POWER_INLINE_TRAPEZOID_CONT
-
-      /**
-       * Stepper iterations between power updates. Increase this value if the board
-       * can't keep up with the processing demands of LASER_POWER_INLINE_TRAPEZOID_CONT.
-       * Disable (or set to 0) to recalculate power on every stepper iteration.
-       */
-      //#define LASER_POWER_INLINE_TRAPEZOID_CONT_PER 10
-
-      /**
-       * Include laser power in G0/G1/G2/G3/G5 commands with the 'S' parameter
-       */
-      //#define LASER_MOVE_POWER
-
-      #if ENABLED(LASER_MOVE_POWER)
-        // Turn off the laser on G0 moves with no power parameter.
-        // If a power parameter is provided, use that instead.
-        //#define LASER_MOVE_G0_OFF
-      #endif
-
-      /**
-       * Inline flag inverted
-       *
-       * WARNING: M5 will NOT turn off the laser unless another move
-       *          is done (so G-code files must end with 'M5 I').
-       */
-      //#define LASER_POWER_INLINE_INVERT
-
-      /**
-       * Continuously apply inline power. ('M3 S3' == 'G1 S3' == 'M3 S3 I')
-       *
-       * The laser might do some weird things, so only enable this
-       * feature if you understand the implications.
-       */
-      //#define LASER_POWER_INLINE_CONTINUOUS
-
-    #else
-
-      #define SPINDLE_LASER_POWERUP_DELAY     50 // (ms) Delay to allow the spindle/laser to come up to speed/power
-      #define SPINDLE_LASER_POWERDOWN_DELAY   50 // (ms) Delay to allow the spindle to stop
-
-    #endif
+    #define SPEED_POWER_SLOPE      0.3922
+    #define SPEED_POWER_INTERCEPT  0
+    #define SPEED_POWER_MIN       10
+    #define SPEED_POWER_MAX      100    // 0-100%
   #endif
 #endif
 
@@ -3012,31 +2838,25 @@
 /**
  * User-defined menu items that execute custom GCode
  */
-#define CUSTOM_USER_MENUS
+
+#if ENABLED(UBL)
+  #define CUSTOM_USER_MENUS
+#endif
+
 #if ENABLED(CUSTOM_USER_MENUS)
+  #define CUSTOM_USER_MENU_TITLE "Commissioning"
   //#define USER_SCRIPT_DONE "M117 User Script Done"
   #define USER_SCRIPT_AUDIBLE_FEEDBACK
   #define USER_SCRIPT_RETURN  // Return to status screen after a script
-  #define CUSTOM_USER_MENU_TITLE "Leveling Tools"
 
-  #define CommBedTmp "65"
-  #if ENABLED(DUAL_Z)
-    #define ALIGN_CMD "G34RI20\n"
-  #else
-    #define ALIGN_CMD ""
-  #endif
   #define USER_DESC_1 "Setup"
-  #if (ENABLED(UBL))
-    #define USER_GCODE_1 "M190S" CommBedTmp"\nG28\n" ALIGN_CMD "G29P1\nG29S1\nG29S0\n G29F0.0\nG29A\nG28\nM109S225\nG1X150Y150\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
-  #else
-    #define USER_GCODE_1 "M190S" CommBedTmp"\n M117 Probing....\nM104S225\nG28\n" ALIGN_CMD "G29\nM400\nG28\nM420S1\nM109S225\nG1X100Y100\nG1Z0\nM500\nM400\nM77\nM117 Set Z Offset"
-  #endif
+  #define USER_GCODE_1 "M190S75\nG28\nG29P1\nG29P3\nG29S1\nG29S0\nG29F0.0\nG29A\nM104S215\nG28\nM109S215\nG1X150Y150F5000\nG1Z0\nM500\nM400\nM117 Set Z Offset"
 
   #define USER_DESC_2 "PID Tune"
-  #define USER_GCODE_2 "M106 S128\nM303C8S225E0\nM500\nM117 PID Tune Done"
+  #define USER_GCODE_2 "M106 S128 \n M303 C8 S215 E1 U \n M500 \n M117 PID Tune Done"
 
   #define USER_DESC_3 "Prep for Z Adjust"
-  #define USER_GCODE_3 "M190S" CommBedTmp"\nM104S235\nG28\nG29L1\nG1X100Y100\nG1Z0"
+  #define USER_GCODE_3 "M190S75\nM104S215\nG28\nG29L1\nG1 X100Y100F5000\nG1Z0"
 
   #define USER_DESC_4 "Store Settings"
   #define USER_GCODE_4 "M500\nM117 Settings Stored"
@@ -3069,7 +2889,7 @@
  *
  * Implement M486 to allow Marlin to skip objects
  */
-#define CANCEL_OBJECTS
+//#define CANCEL_OBJECTS
 
 /**
  * I2C position encoders for closed loop control.

Marlin/Makefile

@@ -92,9 +92,6 @@ U8GLIB             ?= 1
 # this defines whether to include the Trinamic TMCStepper library
 TMC                ?= 1
 
-# this defines whether to include the AdaFruit NeoPixel library
-NEOPIXEL           ?= 0
-
 ############
 # Try to automatically determine whether RELOC_WORKAROUND is needed based
 # on GCC versions:
@@ -125,224 +122,151 @@ ifeq ($(HARDWARE_MOTHERBOARD),0)
 #
 
 # MEGA/RAMPS up to 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1000)
+else ifeq ($(HARDWARE_MOTHERBOARD),3)
 
 # RAMPS 1.3 (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1010)
+else ifeq ($(HARDWARE_MOTHERBOARD),33)
 # RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1011)
+else ifeq ($(HARDWARE_MOTHERBOARD),34)
 # RAMPS 1.3 (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1012)
+else ifeq ($(HARDWARE_MOTHERBOARD),35)
 # RAMPS 1.3 (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1013)
+else ifeq ($(HARDWARE_MOTHERBOARD),36)
 # RAMPS 1.3 (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1014)
+else ifeq ($(HARDWARE_MOTHERBOARD),38)
 
 # RAMPS 1.4 (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1020)
+else ifeq ($(HARDWARE_MOTHERBOARD),43)
 # RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1021)
+else ifeq ($(HARDWARE_MOTHERBOARD),44)
 # RAMPS 1.4 (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1022)
+else ifeq ($(HARDWARE_MOTHERBOARD),45)
 # RAMPS 1.4 (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1023)
+else ifeq ($(HARDWARE_MOTHERBOARD),46)
 # RAMPS 1.4 (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1024)
+else ifeq ($(HARDWARE_MOTHERBOARD),48)
 
 # RAMPS Plus 3DYMY (Power outputs: Hotend, Fan, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1030)
+else ifeq ($(HARDWARE_MOTHERBOARD),143)
 # RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Bed)
-else ifeq ($(HARDWARE_MOTHERBOARD),1031)
+else ifeq ($(HARDWARE_MOTHERBOARD),144)
 # RAMPS Plus 3DYMY (Power outputs: Hotend, Fan0, Fan1)
-else ifeq ($(HARDWARE_MOTHERBOARD),1032)
+else ifeq ($(HARDWARE_MOTHERBOARD),145)
 # RAMPS Plus 3DYMY (Power outputs: Hotend0, Hotend1, Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1033)
+else ifeq ($(HARDWARE_MOTHERBOARD),146)
 # RAMPS Plus 3DYMY (Power outputs: Spindle, Controller Fan)
-else ifeq ($(HARDWARE_MOTHERBOARD),1034)
+else ifeq ($(HARDWARE_MOTHERBOARD),148)
 
 #
 # RAMPS Derivatives - ATmega1280, ATmega2560
 #
 
 # 3Drag Controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1100)
+else ifeq ($(HARDWARE_MOTHERBOARD),77)
 # Velleman K8200 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1101)
+else ifeq ($(HARDWARE_MOTHERBOARD),78)
 # Velleman K8400 Controller (derived from 3Drag Controller)
-else ifeq ($(HARDWARE_MOTHERBOARD),1102)
+else ifeq ($(HARDWARE_MOTHERBOARD),79)
 # 2PrintBeta BAM&DICE with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1103)
+else ifeq ($(HARDWARE_MOTHERBOARD),401)
 # 2PrintBeta BAM&DICE Due with STK drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1104)
+else ifeq ($(HARDWARE_MOTHERBOARD),402)
 # MKS BASE v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1105)
-# MKS v1.4 with A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1106)
+else ifeq ($(HARDWARE_MOTHERBOARD),40)
 # MKS v1.5 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1107)
-# MKS v1.6 with Allegro A4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1108)
-
+else ifeq ($(HARDWARE_MOTHERBOARD),405)
 # MKS BASE 1.0 with Heroic HR4982 stepper drivers
-else ifeq ($(HARDWARE_MOTHERBOARD),1109)
+else ifeq ($(HARDWARE_MOTHERBOARD),41)
 # MKS GEN v1.3 or 1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1110)
+else ifeq ($(HARDWARE_MOTHERBOARD),47)
 # MKS GEN L
-else ifeq ($(HARDWARE_MOTHERBOARD),1111)
+else ifeq ($(HARDWARE_MOTHERBOARD),53)
 # zrib V2.0 control board (Chinese knock off RAMPS replica)
-else ifeq ($(HARDWARE_MOTHERBOARD),1112)
-# BigTreeTech or BIQU KFB2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1113)
+else ifeq ($(HARDWARE_MOTHERBOARD),504)
 # Felix 2.0+ Electronics Board (RAMPS like)
-else ifeq ($(HARDWARE_MOTHERBOARD),1114)
+else ifeq ($(HARDWARE_MOTHERBOARD),37)
 # Invent-A-Part RigidBoard
-else ifeq ($(HARDWARE_MOTHERBOARD),1115)
+else ifeq ($(HARDWARE_MOTHERBOARD),42)
 # Invent-A-Part RigidBoard V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1116)
+else ifeq ($(HARDWARE_MOTHERBOARD),52)
 # Sainsmart 2-in-1 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1117)
+else ifeq ($(HARDWARE_MOTHERBOARD),49)
 # Ultimaker
-else ifeq ($(HARDWARE_MOTHERBOARD),1118)
+else ifeq ($(HARDWARE_MOTHERBOARD),7)
 # Ultimaker (Older electronics. Pre 1.5.4. This is rare)
-else ifeq ($(HARDWARE_MOTHERBOARD),1119)
+else ifeq ($(HARDWARE_MOTHERBOARD),71)
   MCU ?= atmega1280
-
 # Azteeg X3
-else ifeq ($(HARDWARE_MOTHERBOARD),1120)
+else ifeq ($(HARDWARE_MOTHERBOARD),67)
 # Azteeg X3 Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1121)
+else ifeq ($(HARDWARE_MOTHERBOARD),68)
 # Ultimainboard 2.x (Uses TEMP_SENSOR 20)
-else ifeq ($(HARDWARE_MOTHERBOARD),1122)
+else ifeq ($(HARDWARE_MOTHERBOARD),72)
 # Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1123)
-# Raise3D Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1124)
-# Rapide Lite RL200 Rumba
-else ifeq ($(HARDWARE_MOTHERBOARD),1125)
-# Formbot T-Rex 2 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1126)
-# Formbot T-Rex 3
-else ifeq ($(HARDWARE_MOTHERBOARD),1127)
-# Formbot Raptor
-else ifeq ($(HARDWARE_MOTHERBOARD),1128)
-# Formbot Raptor 2
-else ifeq ($(HARDWARE_MOTHERBOARD),1129)
+else ifeq ($(HARDWARE_MOTHERBOARD),80)
 # bq ZUM Mega 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1130)
+else ifeq ($(HARDWARE_MOTHERBOARD),503)
 # MakeBoard Mini v2.1.2 is a control board sold by MicroMake
-else ifeq ($(HARDWARE_MOTHERBOARD),1131)
+else ifeq ($(HARDWARE_MOTHERBOARD),431)
 # TriGorilla Anycubic version 1.3 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1132)
+else ifeq ($(HARDWARE_MOTHERBOARD),343)
 # TriGorilla Anycubic version 1.4 based on RAMPS EFB
-else ifeq ($(HARDWARE_MOTHERBOARD),1133)
-# TriGorilla Anycubic version 1.4 Rev 1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1134)
+else ifeq ($(HARDWARE_MOTHERBOARD),443)
 # Creality: Ender-4, CR-8
-else ifeq ($(HARDWARE_MOTHERBOARD),1135)
-# Creality: CR10S, CR20, CR-X
-else ifeq ($(HARDWARE_MOTHERBOARD),1136)
-# Dagoma F5
-else ifeq ($(HARDWARE_MOTHERBOARD),1137)
-# FYSETC F6 1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1138)
-# FYSETC F6 1.5
-else ifeq ($(HARDWARE_MOTHERBOARD),1139)
-# Duplicator i3 Plus
-else ifeq ($(HARDWARE_MOTHERBOARD),1140)
-# VORON
-else ifeq ($(HARDWARE_MOTHERBOARD),1141)
-# TRONXY V3 1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1142)
-# Z-Bolt X Series
-else ifeq ($(HARDWARE_MOTHERBOARD),1143)
-# TT OSCAR
-else ifeq ($(HARDWARE_MOTHERBOARD),1144)
-# Overlord/Overlord Pro
-else ifeq ($(HARDWARE_MOTHERBOARD),1145)
-# ADIMLab Gantry v1
-else ifeq ($(HARDWARE_MOTHERBOARD),1146)
-# ADIMLab Gantry v2
-else ifeq ($(HARDWARE_MOTHERBOARD),1147)
-# BIQU Tango V1
-else ifeq ($(HARDWARE_MOTHERBOARD),1148)
-# MKS GEN L V2
-else ifeq ($(HARDWARE_MOTHERBOARD),1149)
-# Copymaster 3D
-else ifeq ($(HARDWARE_MOTHERBOARD),1150)
-
-#
-# RAMBo and derivatives
-#
-
-# Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1200)
-# Mini-Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1201)
-# Mini-Rambo 1.0a
-else ifeq ($(HARDWARE_MOTHERBOARD),1202)
-# Einsy Rambo
-else ifeq ($(HARDWARE_MOTHERBOARD),1203)
-# Einsy Retro
-else ifeq ($(HARDWARE_MOTHERBOARD),1204)
-# abee Scoovo X9H
-else ifeq ($(HARDWARE_MOTHERBOARD),1205)
+else ifeq ($(HARDWARE_MOTHERBOARD),243)
 
 #
 # Other ATmega1280, ATmega2560
 #
 
 # Cartesio CN Controls V11
-else ifeq ($(HARDWARE_MOTHERBOARD),1300)
+else ifeq ($(HARDWARE_MOTHERBOARD),111)
 # Cartesio CN Controls V12
-else ifeq ($(HARDWARE_MOTHERBOARD),1301)
-# Cartesio CN Controls V15
-else ifeq ($(HARDWARE_MOTHERBOARD),1302)
+else ifeq ($(HARDWARE_MOTHERBOARD),112)
 # Cheaptronic v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1303)
+else ifeq ($(HARDWARE_MOTHERBOARD),2)
 # Cheaptronic v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1304)
+else ifeq ($(HARDWARE_MOTHERBOARD),21)
 # Makerbot Mightyboard Revision E
-else ifeq ($(HARDWARE_MOTHERBOARD),1305)
+else ifeq ($(HARDWARE_MOTHERBOARD),200)
 # Megatronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1306)
+else ifeq ($(HARDWARE_MOTHERBOARD),70)
 # Megatronics v2.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1307)
+else ifeq ($(HARDWARE_MOTHERBOARD),701)
 # Megatronics v3.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1308)
+else ifeq ($(HARDWARE_MOTHERBOARD),703)
 # Megatronics v3.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1309)
-# Megatronics v3.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1310)
+else ifeq ($(HARDWARE_MOTHERBOARD),704)
+# Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),301)
+# Mini-Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),302)
+# Mini-Rambo 1.0a
+else ifeq ($(HARDWARE_MOTHERBOARD),303)
+# Einsy Rambo
+else ifeq ($(HARDWARE_MOTHERBOARD),304)
+# Einsy Retro
+else ifeq ($(HARDWARE_MOTHERBOARD),305)
 # Elefu Ra Board (v3)
-else ifeq ($(HARDWARE_MOTHERBOARD),1311)
+else ifeq ($(HARDWARE_MOTHERBOARD),21)
 # Leapfrog
-else ifeq ($(HARDWARE_MOTHERBOARD),1312)
+else ifeq ($(HARDWARE_MOTHERBOARD),999)
 # Mega controller
-else ifeq ($(HARDWARE_MOTHERBOARD),1313)
-# Geeetech GT2560 Rev B for Mecreator2
-else ifeq ($(HARDWARE_MOTHERBOARD),1314)
+else ifeq ($(HARDWARE_MOTHERBOARD),310)
+# abee Scoovo X9H
+else ifeq ($(HARDWARE_MOTHERBOARD),321)
 # Geeetech GT2560 Rev. A
-else ifeq ($(HARDWARE_MOTHERBOARD),1315)
+else ifeq ($(HARDWARE_MOTHERBOARD),74)
 # Geeetech GT2560 Rev. A+ (with auto level probe)
-else ifeq ($(HARDWARE_MOTHERBOARD),1316)
-# Geeetech GT2560 Rev B for A10(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1317)
-# Geeetech GT2560 Rev B for A20(M/D)
-else ifeq ($(HARDWARE_MOTHERBOARD),1318)
-# Einstart retrofit
-else ifeq ($(HARDWARE_MOTHERBOARD),1319)
-# Wanhao 0ne+ i3 Mini
-else ifeq ($(HARDWARE_MOTHERBOARD),1320)
+else ifeq ($(HARDWARE_MOTHERBOARD),75)
 
 #
 # ATmega1281, ATmega2561
 #
 
-# Minitronics v1.0/1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1400)
+else ifeq ($(HARDWARE_MOTHERBOARD),702)
   MCU              ?= atmega1281
-# Silvergate v1.0
-else ifeq ($(HARDWARE_MOTHERBOARD),1401)
+else ifeq ($(HARDWARE_MOTHERBOARD),25)
   MCU              ?= atmega1281
 
 #
@@ -350,43 +274,43 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1401)
 #
 
 # Sanguinololu < 1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1500)
+else ifeq ($(HARDWARE_MOTHERBOARD),6)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Sanguinololu 1.2 and above
-else ifeq ($(HARDWARE_MOTHERBOARD),1501)
+else ifeq ($(HARDWARE_MOTHERBOARD),62)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Melzi
-else ifeq ($(HARDWARE_MOTHERBOARD),1502)
+else ifeq ($(HARDWARE_MOTHERBOARD),63)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Melzi with ATmega1284 (MaKr3d version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1503)
+else ifeq ($(HARDWARE_MOTHERBOARD),66)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # Melzi Creality3D board (for CR-10 etc)
-else ifeq ($(HARDWARE_MOTHERBOARD),1504)
+else ifeq ($(HARDWARE_MOTHERBOARD),89)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # Melzi Malyan M150 board
-else ifeq ($(HARDWARE_MOTHERBOARD),1505)
+else ifeq ($(HARDWARE_MOTHERBOARD),92)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # Tronxy X5S
-else ifeq ($(HARDWARE_MOTHERBOARD),1506)
+else ifeq ($(HARDWARE_MOTHERBOARD),505)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # STB V1.1
-else ifeq ($(HARDWARE_MOTHERBOARD),1507)
+else ifeq ($(HARDWARE_MOTHERBOARD),64)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # Azteeg X1
-else ifeq ($(HARDWARE_MOTHERBOARD),1508)
+else ifeq ($(HARDWARE_MOTHERBOARD),65)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 # Anet 1.0 (Melzi clone)
-else ifeq ($(HARDWARE_MOTHERBOARD),1509)
+else ifeq ($(HARDWARE_MOTHERBOARD),69)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega1284p
 
@@ -395,51 +319,51 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1509)
 #
 
 # Gen3 Monolithic Electronics
-else ifeq ($(HARDWARE_MOTHERBOARD),1600)
+else ifeq ($(HARDWARE_MOTHERBOARD),22)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Gen3+
-else ifeq ($(HARDWARE_MOTHERBOARD),1601)
+else ifeq ($(HARDWARE_MOTHERBOARD),9)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Gen6
-else ifeq ($(HARDWARE_MOTHERBOARD),1602)
+else ifeq ($(HARDWARE_MOTHERBOARD),5)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
 # Gen6 deluxe
-else ifeq ($(HARDWARE_MOTHERBOARD),1603)
+else ifeq ($(HARDWARE_MOTHERBOARD),51)
   HARDWARE_VARIANT ?= Gen6
   MCU              ?= atmega644p
 # Gen7 custom (Alfons3 Version)
-else ifeq ($(HARDWARE_MOTHERBOARD),1604)
+else ifeq ($(HARDWARE_MOTHERBOARD),10)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644
   F_CPU            ?= 20000000
 # Gen7 v1.1, v1.2
-else ifeq ($(HARDWARE_MOTHERBOARD),1605)
+else ifeq ($(HARDWARE_MOTHERBOARD),11)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
   F_CPU            ?= 20000000
 # Gen7 v1.3
-else ifeq ($(HARDWARE_MOTHERBOARD),1606)
+else ifeq ($(HARDWARE_MOTHERBOARD),12)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega644p
   F_CPU            ?= 20000000
 # Gen7 v1.4
-else ifeq ($(HARDWARE_MOTHERBOARD),1607)
+else ifeq ($(HARDWARE_MOTHERBOARD),13)
   HARDWARE_VARIANT ?= Gen7
   MCU              ?= atmega1284p
   F_CPU            ?= 20000000
 # Alpha OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1608)
+else ifeq ($(HARDWARE_MOTHERBOARD),90)
   HARDWARE_VARIANT ?= SanguinoA
   MCU              ?= atmega644
 # Final OMCA board
-else ifeq ($(HARDWARE_MOTHERBOARD),1609)
+else ifeq ($(HARDWARE_MOTHERBOARD),91)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 # Sethi 3D_1
-else ifeq ($(HARDWARE_MOTHERBOARD),1610)
+else ifeq ($(HARDWARE_MOTHERBOARD),20)
   HARDWARE_VARIANT ?= Sanguino
   MCU              ?= atmega644p
 
@@ -448,46 +372,46 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1610)
 #
 
 # Teensylu
-else ifeq ($(HARDWARE_MOTHERBOARD),1700)
+else ifeq ($(HARDWARE_MOTHERBOARD),8)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # Printrboard (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1701)
+else ifeq ($(HARDWARE_MOTHERBOARD),81)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # Printrboard Revision F (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1702)
+else ifeq ($(HARDWARE_MOTHERBOARD),811)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # Brainwave (AT90USB646)
-else ifeq ($(HARDWARE_MOTHERBOARD),1703)
+else ifeq ($(HARDWARE_MOTHERBOARD),82)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb646
 # Brainwave Pro (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1704)
+else ifeq ($(HARDWARE_MOTHERBOARD),83)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # SAV Mk-I (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1705)
+else ifeq ($(HARDWARE_MOTHERBOARD),84)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # Teensy++2.0 (AT90USB1286)
-else ifeq ($(HARDWARE_MOTHERBOARD),1706)
+else ifeq ($(HARDWARE_MOTHERBOARD),85)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 # 5DPrint D8 Driver Board
-else ifeq ($(HARDWARE_MOTHERBOARD),1707)
+else ifeq ($(HARDWARE_MOTHERBOARD),88)
   HARDWARE_VARIANT ?= Teensy
   MCU              ?= at90usb1286
 
 # UltiMachine Archim1 (with DRV8825 drivers)
-else ifeq ($(HARDWARE_MOTHERBOARD),3023)
+else ifeq ($(HARDWARE_MOTHERBOARD),1591)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
   F_CPU             = 84000000L
   IS_MCU            = 0
 # UltiMachine Archim2 (with TMC2130 drivers)
-else ifeq ($(HARDWARE_MOTHERBOARD),3024)
+else ifeq ($(HARDWARE_MOTHERBOARD),1592)
   HARDWARE_VARIANT ?= archim
   MCPU              = cortex-m3
   F_CPU             = 84000000L
@@ -634,7 +558,7 @@ ifeq ($(U8GLIB), 1)
 endif
 
 ifeq ($(TMC), 1)
-  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2209Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
+  LIB_CXXSRC += TMCStepper.cpp COOLCONF.cpp DRV_STATUS.cpp IHOLD_IRUN.cpp CHOPCONF.cpp  GCONF.cpp PWMCONF.cpp DRV_CONF.cpp DRVCONF.cpp DRVCTRL.cpp DRVSTATUS.cpp ENCMODE.cpp  RAMP_STAT.cpp SGCSCONF.cpp SHORT_CONF.cpp SMARTEN.cpp SW_MODE.cpp SW_SPI.cpp TMC2130Stepper.cpp TMC2208Stepper.cpp TMC2660Stepper.cpp TMC5130Stepper.cpp TMC5160Stepper.cpp
 endif
 
 ifeq ($(RELOC_WORKAROUND), 1)
@@ -686,7 +610,7 @@ ifeq ($(HARDWARE_VARIANT), Teensy)
 
 else ifeq ($(HARDWARE_VARIANT), archim)
   CDEFS      += -DARDUINO_SAM_ARCHIM -DARDUINO_ARCH_SAM -D__SAM3X8E__ -DUSB_VID=0x27b1 -DUSB_PID=0x0001 -DUSBCON '-DUSB_MANUFACTURER="UltiMachine"' '-DUSB_PRODUCT="Archim"'
-  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp USBCore.cpp
+  LIB_CXXSRC += variant.cpp IPAddress.cpp Reset.cpp RingBuffer.cpp Stream.cpp UARTClass.cpp  USARTClass.cpp abi.cpp new.cpp watchdog.cpp CDC.cpp PluggableUSB.cpp  USBCore.cpp
   LIB_SRC    += cortex_handlers.c iar_calls_sam3.c syscalls_sam3.c dtostrf.c itoa.c
 
   ifeq ($(U8GLIB), 1)
@@ -705,9 +629,9 @@ LIBWARN = -w -Wno-packed-bitfield-compat
 CSTANDARD = -std=gnu99
 CXXSTANDARD = -std=gnu++11
 CDEBUG = -g$(DEBUG)
-CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas -Wunused-parameter
-CTUNING = -fsigned-char -funsigned-bitfields -fno-exceptions \
+CWARN   = -Wall -Wstrict-prototypes -Wno-packed-bitfield-compat -Wno-pragmas
+CXXWARN = -Wall                     -Wno-packed-bitfield-compat -Wno-pragmas
+CTUNING = -fsigned-char -funsigned-bitfields -fpack-struct -fno-exceptions \
           -fshort-enums -ffunction-sections -fdata-sections
 ifneq ($(HARDWARE_MOTHERBOARD),)
   CTUNING += -DMOTHERBOARD=${HARDWARE_MOTHERBOARD}
@@ -721,7 +645,7 @@ ASFLAGS :=          $(CDEFS)
 ifeq ($(HARDWARE_VARIANT), archim)
   LD_PREFIX = -Wl,--gc-sections,-Map,Marlin.ino.map,--cref,--check-sections,--entry=Reset_Handler,--unresolved-symbols=report-all,--warn-common,--warn-section-align
   LD_SUFFIX = $(LDLIBS)
-  LDFLAGS   = -lm -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
+  LDFLAGS   = -lm -gcc -T$(LDSCRIPT) -u _sbrk -u link -u _close -u _fstat -u _isatty -u _lseek -u _read -u _write -u _exit -u kill -u _getpid
 else
   LD_PREFIX = -Wl,--gc-sections,--relax
   LDFLAGS   = -lm
@@ -798,7 +722,7 @@ ifeq (${AVRDUDE_PROGRAMMER}, arduino)
 	stty -hup < $(UPLOAD_PORT); true
 endif
 
-# Display size of file.
+  # Display size of file.
 HEXSIZE = $(SIZE) --target=$(FORMAT) $(BUILD_DIR)/$(TARGET).hex
 ELFSIZE = $(SIZE)  $(SIZE_FLAGS) $(BUILD_DIR)/$(TARGET).elf; \
           $(SIZE)  $(BUILD_DIR)/$(TARGET).elf
@@ -848,7 +772,7 @@ extcoff: $(TARGET).elf
 .elf.sym:
 	$(NM) -n $< > $@
 
-# Link: create ELF output file from library.
+  # Link: create ELF output file from library.
 
 $(BUILD_DIR)/$(TARGET).elf: $(OBJ) Configuration.h
 	$(Pecho) "  CXX   $@"

Marlin/Marlin.ino

@@ -3,7 +3,7 @@
 
   Marlin Firmware
 
-  (c) 2011-2020 MarlinFirmware
+  (c) 2011-2018 MarlinFirmware
   Portions of Marlin are (c) by their respective authors.
   All code complies with GPLv2 and/or GPLv3
 
@@ -19,7 +19,7 @@ Before diving in, we recommend the following essential links:
 
 Marlin Firmware Official Website
 
-  - https://marlinfw.org/
+  - http://marlinfw.org/
     The official Marlin Firmware website contains the most up-to-date
     documentation. Contributions are always welcome!
 
@@ -30,7 +30,7 @@ Configuration
     (Applies to Marlin 1.0.x, so Jerk and Acceleration should be halved.)
     Also... https://www.google.com/search?tbs=vid%3A1&q=configure+marlin
 
-  - https://marlinfw.org/docs/configuration/configuration.html
+  - http://marlinfw.org/docs/configuration/configuration.html
     Marlin's configuration options are explained in more detail here.
 
 Getting Help
@@ -45,9 +45,9 @@ Getting Help
 
 Contributing
 
-  - https://marlinfw.org/docs/development/contributing.html
+  - http://marlinfw.org/docs/development/contributing.html
     If you'd like to contribute to Marlin, read this first!
 
-  - https://marlinfw.org/docs/development/coding_standards.html
+  - http://marlinfw.org/docs/development/coding_standards.html
     Before submitting code get to know the Coding Standards.
 */

Marlin/Version.h

@@ -1,76 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2019 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#pragma once
-
-////////////////////////////
-// VENDOR VERSION EXAMPLE //
-////////////////////////////
-
-/**
- * Marlin release version identifier
- */
-#define SHORT_BUILD_VERSION "2.0.5_SX4N"
-
-/**
- * Verbose version identifier which should contain a reference to the location
- * from where the binary was downloaded or the source code was compiled.
- */
-#define DETAILED_BUILD_VERSION SHORT_BUILD_VERSION " TM3D"
-
-/**
- * The STRING_DISTRIBUTION_DATE represents when the binary file was built,
- * here we define this default string as the date where the latest release
- * version was tagged.
- */
-#define STRING_DISTRIBUTION_DATE "2020-05-01"
-
-/**
- * Defines a generic printer name to be output to the LCD after booting Marlin.
- */
-#define MACHINE_NAME "TM3D SX4"
-
-/**
- * The SOURCE_CODE_URL is the location where users will find the Marlin Source
- * Code which is installed on the device. In most cases —unless the manufacturer
- * has a distinct Github fork— the Source Code URL should just be the main
- * Marlin repository.
- */
-#define SOURCE_CODE_URL "https://github.com/InsanityAutomation/Marlin/tree/TM_SX4_2.0"
-
-/**
- * Default generic printer UUID.
- */
-//#define DEFAULT_MACHINE_UUID "cede2a2f-41a2-4748-9b12-c55c62f367ff"
-
-/**
- * The WEBSITE_URL is the location where users can get more information such as
- * documentation about a specific Marlin release.
- */
-#define WEBSITE_URL "tinymachines3d.com"
-
-/**
- * Set the vendor info the serial USB interface, if changable
- * Currently only supported by DUE platform
- */
-//#define  USB_DEVICE_VENDOR_ID           0x0000
-//#define  USB_DEVICE_PRODUCT_ID          0x0000
-//#define  USB_DEVICE_MANUFACTURE_NAME    WEBSITE_URL

Marlin/_Bootscreen.h

@@ -29,6 +29,7 @@
  *  - http://www.marlinfw.org/tools/u8glib/converter.html
  *  - http://www.digole.com/tools/PicturetoC_Hex_converter.php
  */
+#include <avr/pgmspace.h>
 
 #define CUSTOM_BOOTSCREEN_TIMEOUT   2500
 #define CUSTOM_BOOTSCREEN_BMPWIDTH  128

Marlin/src/HAL/AVR/HAL.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/AVR/HAL.h

@@ -395,8 +395,6 @@ inline void HAL_adc_init() {
 // AVR compatibility
 #define strtof strtod
 
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
-
 /**
  *  set_pwm_frequency
  *  Sets the frequency of the timer corresponding to the provided pin

Marlin/src/HAL/AVR/MarlinSerial.h

@@ -304,7 +304,7 @@
     static constexpr bool XONOFF            = false;
     static constexpr bool EMERGENCYPARSER   = false;
     static constexpr bool DROPPED_RX        = false;
-    static constexpr bool RX_OVERRUNS       = BOTH(HAS_DGUS_LCD, DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
+    static constexpr bool RX_OVERRUNS       = HAS_DGUS_LCD && ENABLED(DGUS_SERIAL_STATS_RX_BUFFER_OVERRUNS);
     static constexpr bool RX_FRAMING_ERRORS = false;
     static constexpr bool MAX_RX_QUEUED     = false;
   };

Marlin/src/HAL/AVR/Servo.cpp

@@ -59,6 +59,7 @@
 
 #include <avr/interrupt.h>
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/AVR/fast_pwm.cpp

@@ -23,7 +23,7 @@
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
 
 #include "HAL.h"
 
@@ -278,5 +278,5 @@ void set_pwm_duty(const pin_t pin, const uint16_t v, const uint16_t v_size/*=255
   }
 }
 
-#endif // NEEDS_HARDWARE_PWM
+#endif // FAST_PWM_FAN || SPINDLE_LASER_PWM
 #endif // __AVR__

Marlin/src/HAL/AVR/fastio.h

@@ -98,9 +98,9 @@
 
 #define SET_INPUT(IO)         _SET_INPUT(IO)
 #define SET_INPUT_PULLUP(IO)  do{ _SET_INPUT(IO); _WRITE(IO, HIGH); }while(0)
-#define SET_INPUT_PULLDOWN    SET_INPUT
 #define SET_OUTPUT(IO)        _SET_OUTPUT(IO)
-#define SET_PWM               SET_OUTPUT
+
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 #define IS_INPUT(IO)          _IS_INPUT(IO)
 #define IS_OUTPUT(IO)         _IS_OUTPUT(IO)

Marlin/src/HAL/AVR/inc/SanityCheck.h

@@ -25,6 +25,16 @@
  * Test AVR-specific configuration values for errors at compile-time.
  */
 
+/**
+ * Digipot requirement
+ */
+ #if ENABLED(DIGIPOT_MCP4018)
+  #if !defined(DIGIPOTS_I2C_SDA_X) || !defined(DIGIPOTS_I2C_SDA_Y) || !defined(DIGIPOTS_I2C_SDA_Z) \
+    || !defined(DIGIPOTS_I2C_SDA_E0) || !defined(DIGIPOTS_I2C_SDA_E1)
+      #error "DIGIPOT_MCP4018 requires DIGIPOTS_I2C_SDA_* pins to be defined."
+  #endif
+#endif
+
 /**
  * Checks for FAST PWM
  */
@@ -46,10 +56,10 @@
 /**
  * The Trinamic library includes SoftwareSerial.h, leading to a compile error.
  */
-#if BOTH(HAS_TRINAMIC_CONFIG, ENDSTOP_INTERRUPTS_FEATURE)
+#if HAS_TRINAMIC_CONFIG && ENABLED(ENDSTOP_INTERRUPTS_FEATURE)
   #error "TMCStepper includes SoftwareSerial.h which is incompatible with ENDSTOP_INTERRUPTS_FEATURE. Disable ENDSTOP_INTERRUPTS_FEATURE to continue."
 #endif
 
-#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
+#if HAS_TMC_SW_SERIAL && ENABLED(MONITOR_DRIVER_STATUS)
   #error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
 #endif

Marlin/src/HAL/AVR/persistent_store_eeprom.cpp

@@ -25,15 +25,9 @@
 
 #if EITHER(EEPROM_SETTINGS, SD_FIRMWARE_UPDATE)
 
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with implementations supplied by the framework.
- */
+#include "../shared/persistent_store_api.h"
 
-#include "../shared/eeprom_api.h"
-
-size_t PersistentStore::capacity()    { return E2END + 1; }
-bool PersistentStore::access_start()  { return true; }
+bool PersistentStore::access_start() { return true; }
 bool PersistentStore::access_finish() { return true; }
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
@@ -67,5 +61,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;  // always assume success for AVR's
 }
 
+size_t PersistentStore::capacity() { return E2END + 1; }
+
 #endif // EEPROM_SETTINGS || SD_FIRMWARE_UPDATE
 #endif // __AVR__

Marlin/src/HAL/AVR/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __AVR__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/DUE/DebugMonitor.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../core/macros.h"

Marlin/src/HAL/DUE/EepromEmulation.cpp

@@ -1,10 +1,9 @@
 /**
  * Marlin 3D Printer Firmware
- *
  * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * Copyright (c) 2016 Bob Cousins bobcousins42@googlemail.com
- * Copyright (c) 2015-2016 Nico Tonnhofer wurstnase.reprap@gmail.com
- * Copyright (c) 2016 Victor Perez victor_pv@hotmail.com
+ *
+ * Based on Sprinter and grbl.
+ * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
  *
  * This program is free software: you can redistribute it and/or modify
  * it under the terms of the GNU General Public License as published by
@@ -20,15 +19,6 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
-#ifdef ARDUINO_ARCH_SAM
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(FLASH_EEPROM_EMULATION)
-
-#ifndef E2END
-  #define E2END 0xFFF // Default to Flash emulated EEPROM size (eeprom_emul.cpp)
-#endif
 
 /* EEPROM emulation over flash with reduced wear
  *
@@ -60,7 +50,14 @@
  *
  */
 
-//#define EE_EMU_DEBUG
+#ifdef ARDUINO_ARCH_SAM
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+
+#include "../shared/Marduino.h"
+#include "../shared/persistent_store_api.h"
 
 #define EEPROMSize     4096
 #define PagesPerGroup   128
@@ -137,18 +134,15 @@ static uint8_t buffer[256] = {0},   // The RAM buffer to accumulate writes
                curPage = 0,         // Current FLASH page inside the group
                curGroup = 0xFF;     // Current FLASH group
 
-#define DEBUG_OUT ENABLED(EE_EMU_DEBUG)
-#include "../../core/debug_out.h"
-
-static void ee_Dump(const int page, const void* data) {
-
-  #ifdef EE_EMU_DEBUG
+//#define EE_EMU_DEBUG
+#ifdef EE_EMU_DEBUG
+  static void ee_Dump(int page,const void* data) {
 
     const uint8_t* c = (const uint8_t*) data;
     char buffer[80];
 
     sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
-    DEBUG_ECHO(buffer);
+    SERIAL_ECHO(buffer);
 
     char* p = &buffer[0];
     for (int i = 0; i< PageSize; ++i) {
@@ -158,16 +152,12 @@ static void ee_Dump(const int page, const void* data) {
       if ((i & 0xF) == 0xF) {
         *p++ = '\n';
         *p = 0;
-        DEBUG_ECHO(buffer);
+        SERIAL_ECHO(buffer);
         p = &buffer[0];
       }
     }
-
-  #else
-    UNUSED(page);
-    UNUSED(data);
-  #endif
-}
+  }
+#endif
 
 /* Flash Writing Protection Key */
 #define FWP_KEY    0x5Au
@@ -180,16 +170,17 @@ static void ee_Dump(const int page, const void* data) {
   #define EEFC_ERROR_FLAGS  (EEFC_FSR_FLOCKE | EEFC_FSR_FCMDE)
 #endif
 
+
 /**
  * Writes the contents of the specified page (no previous erase)
  * @param page    (page #)
  * @param data    (pointer to the data buffer)
  */
 __attribute__ ((long_call, section (".ramfunc")))
-static bool ee_PageWrite(uint16_t page, const void* data) {
+static bool ee_PageWrite(uint16_t page,const void* data) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
   // Read the flash contents
   uint32_t pageContents[PageSize>>2];
@@ -204,11 +195,13 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   for (i = 0; i <PageSize >> 2; i++)
     pageContents[i] = (((uint32_t*)data)[i]) | (~(pageContents[i] ^ ((uint32_t*)data)[i]));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM PageWrite   ", page);
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageWrite   ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -250,8 +243,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ", page);
+    #endif
     return false;
   }
 
@@ -275,9 +270,10 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Write failure for page ", page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Write failure for page ", page);
+    #endif
     return false;
   }
 
@@ -291,11 +287,11 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
   if (memcmp(getFlashStorage(page),data,PageSize)) {
 
     #ifdef EE_EMU_DEBUG
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Verify Write failure for page ", page);
 
-      ee_Dump( page, (uint32_t *)addrflash);
-      ee_Dump(-page, data);
+      ee_Dump( page,(uint32_t *) addrflash);
+      ee_Dump(-page,data);
 
       // Calculate count of changed bits
       uint32_t* p1 = (uint32_t*)addrflash;
@@ -311,7 +307,7 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
           }
         }
       }
-      DEBUG_ECHOLNPAIR("--> Differing bits: ", count);
+      SERIAL_ECHOLNPAIR("--> Differing bits: ", count);
     #endif
 
     return false;
@@ -328,13 +324,15 @@ __attribute__ ((long_call, section (".ramfunc")))
 static bool ee_PageErase(uint16_t page) {
 
   uint16_t i;
-  uint32_t addrflash = uint32_t(getFlashStorage(page));
+  uint32_t addrflash = ((uint32_t)getFlashStorage(page));
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM PageErase  ", page);
-  DEBUG_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
-  DEBUG_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM PageErase  ", page);
+    SERIAL_ECHOLNPAIR(" in FLASH address ", (uint32_t)addrflash);
+    SERIAL_ECHOLNPAIR(" base address     ", (uint32_t)getFlashStorage(0));
+    SERIAL_FLUSH();
+  #endif
 
   // Get the page relative to the start of the EFC controller, and the EFC controller to use
   Efc *efc;
@@ -375,9 +373,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Unlock failure for page ",page);
+    #endif
     return false;
   }
 
@@ -399,9 +398,10 @@ static bool ee_PageErase(uint16_t page) {
     // Reenable interrupts
     __enable_irq();
 
-    DEBUG_ECHO_START();
-    DEBUG_ECHOLNPAIR("EEPROM Erase failure for page ",page);
-
+    #ifdef EE_EMU_DEBUG
+      SERIAL_ECHO_START();
+      SERIAL_ECHOLNPAIR("EEPROM Erase failure for page ",page);
+    #endif
     return false;
   }
 
@@ -415,17 +415,20 @@ static bool ee_PageErase(uint16_t page) {
   uint32_t * aligned_src = (uint32_t *) addrflash;
   for (i = 0; i < PageSize >> 2; i++) {
     if (*aligned_src++ != 0xFFFFFFFF) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
-      ee_Dump(page, (uint32_t *)addrflash);
+
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Verify Erase failure for page ",page);
+
+        ee_Dump( page,(uint32_t *) addrflash);
+      #endif
       return false;
     }
   }
 
   return true;
 }
-
-static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
+static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer = false) {
 
   uint32_t baddr;
   uint32_t blen;
@@ -508,7 +511,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
   return 0xFF;
 }
 
-static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
+static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer = false) {
   uint32_t baddr,
            blen,
            nextAddr = 0xFFFF,
@@ -600,7 +603,7 @@ static bool ee_IsPageClean(int page) {
   return true;
 }
 
-static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData=0xFF) {
+static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData = 0xFF) {
 
   // Check if RAM buffer has something to be written
   bool isEmpty = true;
@@ -926,9 +929,11 @@ static void ee_Init() {
   // If all groups seem to be used, default to first group
   if (curGroup >= GroupCount) curGroup = 0;
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Current Group: ",curGroup);
+    SERIAL_FLUSH();
+  #endif
 
   // Now, validate that all the other group pages are empty
   for (int grp = 0; grp < GroupCount; grp++) {
@@ -936,9 +941,11 @@ static void ee_Init() {
 
     for (int page = 0; page < PagesPerGroup; page++) {
       if (!ee_IsPageClean(grp * PagesPerGroup + page)) {
-        DEBUG_ECHO_START();
-        DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
-        DEBUG_FLUSH();
+        #ifdef EE_EMU_DEBUG
+          SERIAL_ECHO_START();
+          SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on group ", grp);
+          SERIAL_FLUSH();
+        #endif
         ee_PageErase(grp * PagesPerGroup + page);
       }
     }
@@ -948,66 +955,66 @@ static void ee_Init() {
   // and also validate that all the other ones are clean
   for (curPage = 0; curPage < PagesPerGroup; curPage++) {
     if (ee_IsPageClean(curGroup * PagesPerGroup + curPage)) {
-      ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #ifdef EE_EMU_DEBUG
+        ee_Dump(curGroup * PagesPerGroup + curPage, getFlashStorage(curGroup * PagesPerGroup + curPage));
+      #endif
       break;
     }
   }
 
-  DEBUG_ECHO_START();
-  DEBUG_ECHOLNPAIR("EEPROM Active page: ", curPage);
-  DEBUG_FLUSH();
+  #ifdef EE_EMU_DEBUG
+    SERIAL_ECHO_START();
+    SERIAL_ECHOLNPAIR("EEPROM Active page: ", curPage);
+    SERIAL_FLUSH();
+  #endif
 
   // Make sure the pages following the first clean one are also clean
   for (int page = curPage + 1; page < PagesPerGroup; page++) {
     if (!ee_IsPageClean(curGroup * PagesPerGroup + page)) {
-      DEBUG_ECHO_START();
-      DEBUG_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
-      DEBUG_FLUSH();
-      ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #ifdef EE_EMU_DEBUG
+        SERIAL_ECHO_START();
+        SERIAL_ECHOLNPAIR("EEPROM Page ", page, " not clean on active group ", curGroup);
+        SERIAL_FLUSH();
+        ee_Dump(curGroup * PagesPerGroup + page, getFlashStorage(curGroup * PagesPerGroup + page));
+      #endif
       ee_PageErase(curGroup * PagesPerGroup + page);
     }
   }
 }
 
-/* PersistentStore -----------------------------------------------------------*/
-
-#include "../shared/eeprom_api.h"
-
-size_t PersistentStore::capacity()    { return E2END + 1; }
-bool PersistentStore::access_start()  { ee_Init();  return true; }
-bool PersistentStore::access_finish() { ee_Flush(); return true; }
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    uint8_t * const p = (uint8_t * const)pos;
-    uint8_t v = *value;
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    if (v != ee_Read(uint32_t(p))) {
-      ee_Write(uint32_t(p), v);
-      delay(2);
-      if (ee_Read(uint32_t(p)) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  };
-  return false;
+uint8_t eeprom_read_byte(uint8_t* addr) {
+  ee_Init();
+  return ee_Read((uint32_t)addr);
 }
 
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    uint8_t c = ee_Read(uint32_t(pos));
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-  return false;
+void eeprom_write_byte(uint8_t* addr, uint8_t value) {
+  ee_Init();
+  ee_Write((uint32_t)addr, value);
+}
+
+void eeprom_update_block(const void* __src, void* __dst, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  const uint8_t* src = (const uint8_t*)__src;
+  while (__n--) {
+    eeprom_write_byte(dst, *src);
+    ++dst;
+    ++src;
+  }
+}
+
+void eeprom_read_block(void* __dst, const void* __src, size_t __n) {
+  uint8_t* dst = (uint8_t*)__dst;
+  uint8_t* src = (uint8_t*)__src;
+  while (__n--) {
+    *dst = eeprom_read_byte(src);
+    ++dst;
+    ++src;
+  }
+}
+
+void eeprom_flush() {
+  ee_Flush();
 }
 
 #endif // FLASH_EEPROM_EMULATION
-#endif // ARDUINO_ARCH_SAM
+#endif // ARDUINO_ARCH_AVR

Marlin/src/HAL/DUE/HAL.h

@@ -30,7 +30,6 @@
 #define CPU_32_BIT
 
 #include "../shared/Marduino.h"
-#include "../shared/eeprom_if.h"
 #include "../shared/math_32bit.h"
 #include "../shared/HAL_SPI.h"
 #include "fastio.h"
@@ -40,7 +39,7 @@
 #include <stdint.h>
 
 // Define MYSERIAL0/1 before MarlinSerial includes!
-#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
+#if SERIAL_PORT == -1
   #define MYSERIAL0 customizedSerial1
 #elif SERIAL_PORT == 0
   #define MYSERIAL0 Serial
@@ -57,7 +56,7 @@
 #ifdef SERIAL_PORT_2
   #if SERIAL_PORT_2 == SERIAL_PORT
     #error "SERIAL_PORT_2 must be different from SERIAL_PORT. Please update your configuration."
-  #elif SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
+  #elif SERIAL_PORT_2 == -1
     #define MYSERIAL1 customizedSerial2
   #elif SERIAL_PORT_2 == 0
     #define MYSERIAL1 Serial
@@ -95,6 +94,7 @@
   #endif
 #endif
 
+
 #include "MarlinSerial.h"
 #include "MarlinSerialUSB.h"
 
@@ -131,6 +131,14 @@ void sei();                     // Enable interrupts
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
+//
+// EEPROM
+//
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
+
 //
 // ADC
 //

Marlin/src/HAL/DUE/MarlinSerial.cpp

@@ -629,13 +629,23 @@ void MarlinSerial<Cfg>::printFloat(double number, uint8_t digits) {
 
 // If not using the USB port as serial port
 #if SERIAL_PORT >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;      // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;   // Instantiate
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
 #endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
-  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;    // Define
-  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2; // Instantiate
+#ifdef SERIAL_PORT_2
+
+  // Preinstantiate
+  template class MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>>;
+
+  // Instantiate
+  MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif
 
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/MarlinSerial.h

@@ -172,9 +172,13 @@ struct MarlinSerialCfg {
 };
 
 #if SERIAL_PORT >= 0
-  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
-#endif
 
-#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
+  extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT>> customizedSerial1;
+
+#endif // SERIAL_PORT >= 0
+
+#ifdef SERIAL_PORT_2
+
   extern MarlinSerial<MarlinSerialCfg<SERIAL_PORT_2>> customizedSerial2;
+
 #endif

Marlin/src/HAL/DUE/MarlinSerialUSB.cpp

@@ -29,7 +29,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
 #include "MarlinSerialUSB.h"
 
@@ -73,7 +73,9 @@ int MarlinSerialUSB::peek() {
 
   pending_char = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)pending_char));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)pending_char);
+  #endif
 
   return pending_char;
 }
@@ -95,7 +97,9 @@ int MarlinSerialUSB::read() {
 
   int c = udi_cdc_getc();
 
-  TERN_(EMERGENCY_PARSER, emergency_parser.update(emergency_state, (char)c));
+  #if ENABLED(EMERGENCY_PARSER)
+    emergency_parser.update(emergency_state, (char)c);
+  #endif
 
   return c;
 }
@@ -279,12 +283,8 @@ void MarlinSerialUSB::printFloat(double number, uint8_t digits) {
 }
 
 // Preinstantiate
-#if SERIAL_PORT == -1
-  MarlinSerialUSB customizedSerial1;
-#endif
-#if SERIAL_PORT_2 == -1
-  MarlinSerialUSB customizedSerial2;
-#endif
+MarlinSerialUSB customizedSerial1;
+
+#endif // SERIAL_PORT == -1
 
-#endif // HAS_USB_SERIAL
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/MarlinSerialUSB.h

@@ -28,7 +28,7 @@
 
 #include "../../inc/MarlinConfig.h"
 
-#if HAS_USB_SERIAL
+#if SERIAL_PORT == -1
 
 #include <WString.h>
 
@@ -88,12 +88,6 @@ private:
   static void printFloat(double, uint8_t);
 };
 
-#if SERIAL_PORT == -1
-  extern MarlinSerialUSB customizedSerial1;
-#endif
+extern MarlinSerialUSB customizedSerial1;
 
-#if SERIAL_PORT_2 == -1
-  extern MarlinSerialUSB customizedSerial2;
-#endif
-
-#endif // HAS_USB_SERIAL
+#endif // SERIAL_PORT == -1

Marlin/src/HAL/DUE/Servo.cpp

@@ -44,6 +44,7 @@
 
 #if HAS_SERVOS
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 

Marlin/src/HAL/DUE/endstop_interrupts.h

@@ -47,21 +47,43 @@ void endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
-  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  #if HAS_X_MAX
+    _ATTACH(X_MAX_PIN);
+  #endif
+  #if HAS_X_MIN
+    _ATTACH(X_MIN_PIN);
+  #endif
+  #if HAS_Y_MAX
+    _ATTACH(Y_MAX_PIN);
+  #endif
+  #if HAS_Y_MIN
+    _ATTACH(Y_MIN_PIN);
+  #endif
+  #if HAS_Z_MAX
+    _ATTACH(Z_MAX_PIN);
+  #endif
+  #if HAS_Z_MIN
+     _ATTACH(Z_MIN_PIN);
+  #endif
+  #if HAS_Z2_MAX
+    _ATTACH(Z2_MAX_PIN);
+  #endif
+  #if HAS_Z2_MIN
+    _ATTACH(Z2_MIN_PIN);
+  #endif
+  #if HAS_Z3_MAX
+    _ATTACH(Z3_MAX_PIN);
+  #endif
+  #if HAS_Z3_MIN
+    _ATTACH(Z3_MIN_PIN);
+  #endif
+  #if HAS_Z4_MAX
+    _ATTACH(Z4_MAX_PIN);
+  #endif
+  #if HAS_Z4_MIN
+    _ATTACH(Z4_MIN_PIN);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    _ATTACH(Z_MIN_PROBE_PIN);
+  #endif
 }

Marlin/src/HAL/DUE/fastio.h

@@ -166,7 +166,7 @@
 // Set pin as output (wrapper) -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)       _SET_OUTPUT(IO)
 // Set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 // Check if pin is an input
 #define IS_INPUT(IO)         ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) == 0)
@@ -174,7 +174,7 @@
 #define IS_OUTPUT(IO)        ((digitalPinToPort(IO)->PIO_OSR & digitalPinToBitMask(IO)) != 0)
 
 // Shorthand
-#define OUT_WRITE(IO,V)      do{ SET_OUTPUT(IO); WRITE(IO,V); }while(0)
+#define OUT_WRITE(IO,V)       { SET_OUTPUT(IO); WRITE(IO,V); }
 
 // digitalRead/Write wrappers
 #define extDigitalRead(IO)    digitalRead(IO)

Marlin/src/HAL/DUE/fastio/G2_PWM.cpp

@@ -46,31 +46,6 @@
 
 #include "G2_PWM.h"
 
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-  #define G2_PWM_X 1
-#else
-  #define G2_PWM_X 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-  #define G2_PWM_Y 1
-#else
-  #define G2_PWM_Y 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_Z)
-  #define G2_PWM_Z 1
-#else
-  #define G2_PWM_Z 0
-#endif
-#if PIN_EXISTS(MOTOR_CURRENT_PWM_E)
-  #define G2_PWM_E 1
-#else
-  #define G2_PWM_E 0
-#endif
-#define G2_MASK_X(V) (G2_PWM_X * (V))
-#define G2_MASK_Y(V) (G2_PWM_Y * (V))
-#define G2_MASK_Z(V) (G2_PWM_Z * (V))
-#define G2_MASK_E(V) (G2_PWM_E * (V))
-
 volatile uint32_t *SODR_A = &PIOA->PIO_SODR,
                   *SODR_B = &PIOB->PIO_SODR,
                   *CODR_A = &PIOA->PIO_CODR,
@@ -80,18 +55,10 @@ PWM_map ISR_table[NUM_PWMS] = PWM_MAP_INIT;
 
 void Stepper::digipot_init() {
 
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_X)
-    OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
-  #endif
-  #if PIN_EXISTS(MOTOR_CURRENT_PWM_Y)
-    OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
-  #endif
-  #if G2_PWM_Z
-    OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
-  #endif
-  #if G2_PWM_E
-    OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
-  #endif
+  OUT_WRITE(MOTOR_CURRENT_PWM_X_PIN, 0);  // init pins
+  OUT_WRITE(MOTOR_CURRENT_PWM_Y_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_Z_PIN, 0);
+  OUT_WRITE(MOTOR_CURRENT_PWM_E_PIN, 0);
 
   #define WPKEY          (0x50574D << 8) // “PWM” in ASCII
   #define WPCMD_DIS_SW   0  // command to disable Write Protect SW
@@ -104,51 +71,30 @@ void Stepper::digipot_init() {
   PWM->PWM_WPCR = WPKEY | WPRG_ALL | WPCMD_DIS_SW;        // enable setting of all PWM registers
   PWM->PWM_CLK = PWM_CLOCK_F;                             // enable CLK_A and set it to 1MHz, leave CLK_B disabled
   PWM->PWM_CH_NUM[0].PWM_CMR = 0b1011;                    // set channel 0 to Clock A input & to left aligned
-  if (G2_PWM_X) PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;      // set channel 1 to Clock A input & to left aligned
-  if (G2_PWM_Y) PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;      // set channel 2 to Clock A input & to left aligned
-  if (G2_PWM_Z) PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;      // set channel 3 to Clock A input & to left aligned
-  if (G2_PWM_E) PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;      // set channel 4 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[1].PWM_CMR = 0b1011;                    // set channel 1 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[2].PWM_CMR = 0b1011;                    // set channel 2 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[3].PWM_CMR = 0b1011;                    // set channel 3 to Clock A input & to left aligned
+  PWM->PWM_CH_NUM[4].PWM_CMR = 0b1011;                    // set channel 4 to Clock A input & to left aligned
 
   PWM->PWM_CH_NUM[0].PWM_CPRD = PWM_PERIOD_US;            // set channel 0 Period
 
   PWM->PWM_IER2 = PWM_IER1_CHID0;                         // generate interrupt when counter0 overflows
-  PWM->PWM_IER2 = PWM_IER2_CMPM0
-    | G2_MASK_X(PWM_IER2_CMPM1)
-    | G2_MASK_Y(PWM_IER2_CMPM2)
-    | G2_MASK_Z(PWM_IER2_CMPM3)
-    | G2_MASK_E(PWM_IER2_CMPM4)
-  ; // generate interrupt on compare event
+  PWM->PWM_IER2 = PWM_IER2_CMPM0 | PWM_IER2_CMPM1 | PWM_IER2_CMPM2 | PWM_IER2_CMPM3 | PWM_IER2_CMPM4;        // generate interrupt on compare event
 
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0])); // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1])); // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2])); // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
+  PWM->PWM_CMP[1].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 1 PWM inactive
+  PWM->PWM_CMP[2].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[0]));   // interrupt when counter0 == CMPV - used to set Motor 2 PWM inactive
+  PWM->PWM_CMP[3].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[1]));   // interrupt when counter0 == CMPV - used to set Motor 3 PWM inactive
+  PWM->PWM_CMP[4].PWM_CMPV = 0x010000000LL | G2_VREF_COUNT(G2_VREF(motor_current_setting[2]));   // interrupt when counter0 == CMPV - used to set Motor 4 PWM inactive
 
-  if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_Z) PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
-  if (G2_PWM_E) PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[1].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[2].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[3].PWM_CMPM = 0x0001;  // enable compare event
+  PWM->PWM_CMP[4].PWM_CMPM = 0x0001;  // enable compare event
 
-  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0
-    | G2_MASK_X(PWM_SCM_SYNC1)
-    | G2_MASK_Y(PWM_SCM_SYNC2)
-    | G2_MASK_Z(PWM_SCM_SYNC3)
-    | G2_MASK_E(PWM_SCM_SYNC4)
-  ; // sync 1-4 with 0, use mode 0 for updates
+  PWM->PWM_SCM = PWM_SCM_UPDM_MODE0 | PWM_SCM_SYNC0 | PWM_SCM_SYNC1 | PWM_SCM_SYNC2 | PWM_SCM_SYNC3 | PWM_SCM_SYNC4; // sync 1-4 with 0, use mode 0 for updates
 
-  PWM->PWM_ENA = PWM_ENA_CHID0
-    | G2_MASK_X(PWM_ENA_CHID1)
-    | G2_MASK_Y(PWM_ENA_CHID2)
-    | G2_MASK_Z(PWM_ENA_CHID3)
-    | G2_MASK_E(PWM_ENA_CHID4)
-  ; // enable channels used by G2
-
-  PWM->PWM_IER1 = PWM_IER1_CHID0
-    | G2_MASK_X(PWM_IER1_CHID1)
-    | G2_MASK_Y(PWM_IER1_CHID2)
-    | G2_MASK_Z(PWM_IER1_CHID3)
-    | G2_MASK_E(PWM_IER1_CHID4)
-  ; // enable interrupts for channels used by G2
+  PWM->PWM_ENA = PWM_ENA_CHID0 | PWM_ENA_CHID1 | PWM_ENA_CHID2 | PWM_ENA_CHID3 | PWM_ENA_CHID4;         // enable the channels used by G2
+  PWM->PWM_IER1 = PWM_IER1_CHID0 | PWM_IER1_CHID1 | PWM_IER1_CHID2 | PWM_IER1_CHID3 | PWM_IER1_CHID4;        // enable interrupts for the channels used by G2
 
   NVIC_EnableIRQ(PWM_IRQn);     // Enable interrupt handler
   NVIC_SetPriority(PWM_IRQn, NVIC_EncodePriority(0, 10, 0));  // normal priority for PWM module (can stand some jitter on the Vref signals)
@@ -159,27 +105,20 @@ void Stepper::digipot_current(const uint8_t driver, const int16_t current) {
   if (!(PWM->PWM_CH_NUM[0].PWM_CPRD == PWM_PERIOD_US)) digipot_init();  // Init PWM system if needed
 
   switch (driver) {
-    case 0:
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
-      if (G2_PWM_X) PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_Y) PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
-      if (G2_PWM_X || G2_PWM_Y) PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      break;
-    case 1:
-      if (G2_PWM_Z) {
-        PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
-        PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
-    default:
-      if (G2_PWM_E) {
-        PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
-        PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
-        PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
-      }
-      break;
+    case 0: PWM->PWM_CMP[1].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update X & Y
+            PWM->PWM_CMP[2].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));
+            PWM->PWM_CMP[1].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_CMP[2].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    case 1: PWM->PWM_CMP[3].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update Z
+            PWM->PWM_CMP[3].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
+    default:PWM->PWM_CMP[4].PWM_CMPVUPD = 0x010000000LL | G2_VREF_COUNT(G2_VREF(current));    // update E
+            PWM->PWM_CMP[4].PWM_CMPMUPD = 0x0001;  // enable compare event
+            PWM->PWM_SCUC = PWM_SCUC_UPDULOCK; // tell the PWM controller to update the values on the next cycle
+            break;
   }
 }
 
@@ -188,17 +127,17 @@ volatile uint32_t PWM_ISR1_STATUS, PWM_ISR2_STATUS;
 void PWM_Handler() {
   PWM_ISR1_STATUS = PWM->PWM_ISR1;
   PWM_ISR2_STATUS = PWM->PWM_ISR2;
-  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                                                         // CHAN_0 interrupt
-    if (G2_PWM_X) *ISR_table[0].set_register = ISR_table[0].write_mask;                           // set X to active
-    if (G2_PWM_Y) *ISR_table[1].set_register = ISR_table[1].write_mask;                           // set Y to active
-    if (G2_PWM_Z) *ISR_table[2].set_register = ISR_table[2].write_mask;                           // set Z to active
-    if (G2_PWM_E) *ISR_table[3].set_register = ISR_table[3].write_mask;                           // set E to active
+  if (PWM_ISR1_STATUS & PWM_IER1_CHID0) {                           // CHAN_0 interrupt
+    *ISR_table[0].set_register = ISR_table[0].write_mask;                                          // set X to active
+    *ISR_table[1].set_register = ISR_table[1].write_mask;                                          // set Y to active
+    *ISR_table[2].set_register = ISR_table[2].write_mask;                                          // set Z to active
+    *ISR_table[3].set_register = ISR_table[3].write_mask;                                          // set E to active
   }
   else {
-    if (G2_PWM_X && (PWM_ISR2_STATUS & PWM_IER2_CMPM1)) *ISR_table[0].clr_register = ISR_table[0].write_mask; // set X to inactive
-    if (G2_PWM_Y && (PWM_ISR2_STATUS & PWM_IER2_CMPM2)) *ISR_table[1].clr_register = ISR_table[1].write_mask; // set Y to inactive
-    if (G2_PWM_Z && (PWM_ISR2_STATUS & PWM_IER2_CMPM3)) *ISR_table[2].clr_register = ISR_table[2].write_mask; // set Z to inactive
-    if (G2_PWM_E && (PWM_ISR2_STATUS & PWM_IER2_CMPM4)) *ISR_table[3].clr_register = ISR_table[3].write_mask; // set E to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM1)  *ISR_table[0].clr_register = ISR_table[0].write_mask;   // set X to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM2)  *ISR_table[1].clr_register = ISR_table[1].write_mask;   // set Y to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM3)  *ISR_table[2].clr_register = ISR_table[2].write_mask;   // set Z to inactive
+    if (PWM_ISR2_STATUS & PWM_IER2_CMPM4)  *ISR_table[3].clr_register = ISR_table[3].write_mask;   // set E to inactive
   }
   return;
 }

Marlin/src/HAL/DUE/inc/Conditionals_post.h

@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if USE_FALLBACK_EEPROM
-  #define FLASH_EEPROM_EMULATION
-#elif EITHER(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
+#if USE_EMULATED_EEPROM
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
+  #define FLASH_EEPROM_EMULATION 1
 #endif

Marlin/src/HAL/DUE/persistent_store_eeprom.cpp

@@ -22,21 +22,27 @@
  */
 #ifdef ARDUINO_ARCH_SAM
 
+#include "../../inc/MarlinConfigPre.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
 #include "../../inc/MarlinConfig.h"
+#include "../shared/persistent_store_api.h"
 
-#if USE_WIRED_EEPROM
+#if !defined(E2END) && ENABLED(FLASH_EEPROM_EMULATION)
+  #define E2END 0xFFF // Default to Flash emulated EEPROM size (EepromEmulation_Due.cpp)
+#endif
 
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
+extern void eeprom_flush();
 
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
+bool PersistentStore::access_start() { return true; }
 
-size_t PersistentStore::capacity()    { return E2END + 1; }
-bool PersistentStore::access_start()  { return true; }
-bool PersistentStore::access_finish() { return true; }
+bool PersistentStore::access_finish() {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    eeprom_flush();
+  #endif
+  return true;
+}
 
 bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
   while (size--) {
@@ -70,5 +76,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;
 }
 
-#endif // USE_WIRED_EEPROM
+size_t PersistentStore::capacity() { return E2END + 1; }
+
+#endif // EEPROM_SETTINGS
 #endif // ARDUINO_ARCH_SAM

Marlin/src/HAL/DUE/upload_extra_script.py

@@ -1,18 +0,0 @@
-#
-# Set upload_command
-#
-#  Windows: bossac.exe
-#  Other: leave unchanged
-#
-
-import platform
-current_OS = platform.system()
-
-if current_OS == 'Windows':
-
-	Import("env")
-
-	# Use bossac.exe on Windows
-	env.Replace(
-	    UPLOADCMD="bossac --info --unlock --write --verify --reset --erase -U false --boot"
-	)

Marlin/src/HAL/DUE/usb/conf_usb.h

@@ -78,6 +78,10 @@
 //! To define a Full speed device
 //#define USB_DEVICE_FULL_SPEED
 
+#if MB(ARCHIM1)
+  #define USB_DEVICE_FULL_SPEED
+#endif
+
 //! To authorize the High speed
 #ifndef USB_DEVICE_FULL_SPEED
   #if (UC3A3||UC3A4)

Marlin/src/HAL/DUE/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_SAM
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/ESP32/HAL.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "HAL.h"
@@ -96,7 +97,9 @@ void HAL_init_board() {
     esp3dlib.init();
   #elif ENABLED(WIFISUPPORT)
     wifi_init();
-    TERN_(OTASUPPORT, OTA_init());
+    #if ENABLED(OTASUPPORT)
+      OTA_init();
+    #endif
     #if ENABLED(WEBSUPPORT)
       spiffs_init();
       web_init();
@@ -130,7 +133,9 @@ void HAL_idletask() {
   #if BOTH(WIFISUPPORT, OTASUPPORT)
     OTA_handle();
   #endif
-  TERN_(ESP3D_WIFISUPPORT, esp3dlib.idletask());
+  #if ENABLED(ESP3D_WIFISUPPORT)
+    esp3dlib.idletask();
+  #endif
 }
 
 void HAL_clear_reset_source() { }
@@ -171,17 +176,39 @@ void HAL_adc_init() {
   adc1_config_width(ADC_WIDTH_12Bit);
 
   // Configure channels only if used as (re-)configuring a pin for ADC that is used elsewhere might have adverse effects
-  TERN_(HAS_TEMP_ADC_0, adc1_set_attenuation(get_channel(TEMP_0_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_1, adc1_set_attenuation(get_channel(TEMP_1_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_2, adc1_set_attenuation(get_channel(TEMP_2_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_3, adc1_set_attenuation(get_channel(TEMP_3_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_4, adc1_set_attenuation(get_channel(TEMP_4_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_5, adc1_set_attenuation(get_channel(TEMP_5_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_6, adc2_set_attenuation(get_channel(TEMP_6_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
-  TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
-  TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
+  #if HAS_TEMP_ADC_0
+    adc1_set_attenuation(get_channel(TEMP_0_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_1
+    adc1_set_attenuation(get_channel(TEMP_1_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_2
+    adc1_set_attenuation(get_channel(TEMP_2_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_3
+    adc1_set_attenuation(get_channel(TEMP_3_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_4
+    adc1_set_attenuation(get_channel(TEMP_4_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_5
+    adc1_set_attenuation(get_channel(TEMP_5_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_6
+    adc2_set_attenuation(get_channel(TEMP_6_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_ADC_7
+    adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_HEATED_BED
+    adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db);
+  #endif
+  #if HAS_TEMP_CHAMBER
+    adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db);
+  #endif
+  #if ENABLED(FILAMENT_WIDTH_SENSOR)
+    adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db);
+  #endif
 
   // Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.
   // That's why we're not setting it up here.

Marlin/src/HAL/ESP32/HAL.h

@@ -109,6 +109,12 @@ int freeMemory();
 
 void analogWrite(pin_t pin, int value);
 
+// EEPROM
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+void eeprom_read_block (void *__dst, const void *__src, size_t __n);
+void eeprom_update_block (const void *__src, void *__dst, size_t __n);
+
 // ADC
 #define HAL_ANALOG_SELECT(pin)
 

Marlin/src/HAL/ESP32/HAL_SPI.cpp

@@ -20,6 +20,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "HAL.h"

Marlin/src/HAL/ESP32/Servo.cpp

@@ -61,7 +61,9 @@ void Servo::move(const int value) {
   if (attach(0) >= 0) {
     write(value);
     safe_delay(servo_delay[channel]);
-    TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+    #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
+      detach();
+    #endif
   }
 }
 #endif // HAS_SERVOS

Marlin/src/HAL/ESP32/endstop_interrupts.h

@@ -42,21 +42,43 @@ void ICACHE_RAM_ATTR endstop_ISR() { endstops.update(); }
 
 void setup_endstop_interrupts() {
   #define _ATTACH(P) attachInterrupt(digitalPinToInterrupt(P), endstop_ISR, CHANGE)
-  TERN_(HAS_X_MAX, _ATTACH(X_MAX_PIN));
-  TERN_(HAS_X_MIN, _ATTACH(X_MIN_PIN));
-  TERN_(HAS_Y_MAX, _ATTACH(Y_MAX_PIN));
-  TERN_(HAS_Y_MIN, _ATTACH(Y_MIN_PIN));
-  TERN_(HAS_Z_MAX, _ATTACH(Z_MAX_PIN));
-  TERN_(HAS_Z_MIN, _ATTACH(Z_MIN_PIN));
-  TERN_(HAS_X2_MAX, _ATTACH(X2_MAX_PIN));
-  TERN_(HAS_X2_MIN, _ATTACH(X2_MIN_PIN));
-  TERN_(HAS_Y2_MAX, _ATTACH(Y2_MAX_PIN));
-  TERN_(HAS_Y2_MIN, _ATTACH(Y2_MIN_PIN));
-  TERN_(HAS_Z2_MAX, _ATTACH(Z2_MAX_PIN));
-  TERN_(HAS_Z2_MIN, _ATTACH(Z2_MIN_PIN));
-  TERN_(HAS_Z3_MAX, _ATTACH(Z3_MAX_PIN));
-  TERN_(HAS_Z3_MIN, _ATTACH(Z3_MIN_PIN));
-  TERN_(HAS_Z4_MAX, _ATTACH(Z4_MAX_PIN));
-  TERN_(HAS_Z4_MIN, _ATTACH(Z4_MIN_PIN));
-  TERN_(HAS_Z_MIN_PROBE_PIN, _ATTACH(Z_MIN_PROBE_PIN));
+  #if HAS_X_MAX
+    _ATTACH(X_MAX_PIN);
+  #endif
+  #if HAS_X_MIN
+    _ATTACH(X_MIN_PIN);
+  #endif
+  #if HAS_Y_MAX
+    _ATTACH(Y_MAX_PIN);
+  #endif
+  #if HAS_Y_MIN
+    _ATTACH(Y_MIN_PIN);
+  #endif
+  #if HAS_Z_MAX
+    _ATTACH(Z_MAX_PIN);
+  #endif
+  #if HAS_Z_MIN
+     _ATTACH(Z_MIN_PIN);
+  #endif
+  #if HAS_Z2_MAX
+    _ATTACH(Z2_MAX_PIN);
+  #endif
+  #if HAS_Z2_MIN
+    _ATTACH(Z2_MIN_PIN);
+  #endif
+  #if HAS_Z3_MAX
+    _ATTACH(Z3_MAX_PIN);
+  #endif
+  #if HAS_Z3_MIN
+    _ATTACH(Z3_MIN_PIN);
+  #endif
+  #if HAS_Z4_MAX
+    _ATTACH(Z4_MAX_PIN);
+  #endif
+  #if HAS_Z4_MIN
+    _ATTACH(Z4_MIN_PIN);
+  #endif
+  #if HAS_Z_MIN_PROBE_PIN
+    _ATTACH(Z_MIN_PROBE_PIN);
+  #endif
 }

Marlin/src/HAL/ESP32/fastio.h

@@ -56,7 +56,7 @@
 #define SET_OUTPUT(IO)          do{ _SET_OUTPUT(IO); }while(0)
 
 // Set pin as PWM
-#define SET_PWM                 SET_OUTPUT
+#define SET_PWM(IO)             SET_OUTPUT(IO)
 
 // Set pin as output and init
 #define OUT_WRITE(IO,V)         do{ _SET_OUTPUT(IO); WRITE(IO,V); }while(0)

Marlin/src/HAL/ESP32/persistent_store_impl.cpp

@@ -19,14 +19,15 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "../../inc/MarlinConfig.h"
 
-#if ENABLED(EEPROM_SETTINGS)
+#if ENABLED(EEPROM_SETTINGS) && DISABLED(FLASH_EEPROM_EMULATION)
 
-#include "../shared/eeprom_api.h"
-#include <EEPROM.h>
+#include "../shared/persistent_store_api.h"
+#include "EEPROM.h"
 
 #define EEPROM_SIZE 4096
 

Marlin/src/HAL/ESP32/spiffs.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/HAL/ESP32/timers.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include <stdio.h>

Marlin/src/HAL/ESP32/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/ESP32/web.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/HAL/ESP32/wifi.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ARDUINO_ARCH_ESP32
 
 #include "../../core/serial.h"

Marlin/src/HAL/HAL.h

@@ -27,10 +27,8 @@
 
 #define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
 
-#ifndef I2C_ADDRESS
-  #define I2C_ADDRESS(A) (A)
-#endif
-
 inline void watchdog_refresh() {
-  TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
+  #if ENABLED(USE_WATCHDOG)
+    HAL_watchdog_refresh();
+  #endif
 }

Marlin/src/HAL/LINUX/HAL.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/LINUX/arduino.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include <iostream>
@@ -75,6 +76,20 @@ uint16_t analogRead(pin_t adc_pin) {
   return Gpio::get(DIGITAL_PIN_TO_ANALOG_PIN(adc_pin));
 }
 
+// **************************
+// Persistent Config Storage
+// **************************
+
+void eeprom_write_byte(unsigned char *pos, unsigned char value) {
+
+}
+
+unsigned char eeprom_read_byte(uint8_t * pos) { return '\0'; }
+
+void eeprom_read_block(void *__dst, const void *__src, size_t __n) { }
+
+void eeprom_update_block(const void *__src, void *__dst, size_t __n) { }
+
 char *dtostrf(double __val, signed char __width, unsigned char __prec, char *__s) {
   char format_string[20];
   snprintf(format_string, 20, "%%%d.%df", __width, __prec);

Marlin/src/HAL/LINUX/hardware/Clock.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "../../../inc/MarlinConfig.h"

Marlin/src/HAL/LINUX/hardware/Gpio.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "Gpio.h"

Marlin/src/HAL/LINUX/hardware/Heater.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "Clock.h"

Marlin/src/HAL/LINUX/hardware/IOLoggerCSV.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "IOLoggerCSV.h"

Marlin/src/HAL/LINUX/hardware/LinearAxis.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include <random>

Marlin/src/HAL/LINUX/hardware/Timer.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "Timer.h"

Marlin/src/HAL/LINUX/include/Arduino.h

@@ -106,6 +106,12 @@ bool digitalRead(pin_t);
 void analogWrite(pin_t, int);
 uint16_t analogRead(pin_t);
 
+// EEPROM
+void eeprom_write_byte(unsigned char *pos, unsigned char value);
+unsigned char eeprom_read_byte(unsigned char *pos);
+void eeprom_read_block(void *__dst, const void *__src, size_t __n);
+void eeprom_update_block(const void *__src, void *__dst, size_t __n);
+
 int32_t random(int32_t);
 int32_t random(int32_t, int32_t);
 void randomSeed(uint32_t);

Marlin/src/HAL/LINUX/include/pinmapping.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include <pinmapping.h>

Marlin/src/HAL/LINUX/main.cpp

@@ -17,6 +17,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 extern void setup();

Marlin/src/HAL/LINUX/persistent_store_impl.cpp

@@ -19,13 +19,14 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"
 
 #if ENABLED(EEPROM_SETTINGS)
 
-#include "../shared/eeprom_api.h"
+#include "../shared/persistent_store_api.h"
 #include <stdio.h>
 
 #define LINUX_EEPROM_SIZE (E2END + 1)

Marlin/src/HAL/LINUX/spi_pins.h

@@ -24,7 +24,7 @@
 #include "../../core/macros.h"
 #include "../../inc/MarlinConfigPre.h"
 
-#if BOTH(HAS_GRAPHICAL_LCD, SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if HAS_GRAPHICAL_LCD && ENABLED(SDSUPPORT) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LINUX/timers.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "hardware/Timer.h"

Marlin/src/HAL/LINUX/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __PLAT_LINUX__
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/LPC1768/DebugMonitor.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../core/macros.h"
@@ -210,7 +211,11 @@ void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause
 
   // Nothing below here is compiled because NVIC_SystemReset loops forever
 
-  for (;;) { TERN_(USE_WATCHDOG, watchdog_init()); }
+  for (;;) {
+    #if ENABLED(USE_WATCHDOG)
+      watchdog_init();
+    #endif
+  }
 }
 
 extern "C" {

Marlin/src/HAL/LPC1768/HAL.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfig.h"
@@ -66,10 +67,14 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval) {
   return ind > -1 ? ind : dval;
 }
 
-void flashFirmware(const int16_t) { NVIC_SystemReset(); }
+void flashFirmware(int16_t value) {
+  NVIC_SystemReset();
+}
 
 void HAL_clear_reset_source(void) {
-  TERN_(USE_WATCHDOG, watchdog_clear_timeout_flag());
+  #if ENABLED(USE_WATCHDOG)
+    watchdog_clear_timeout_flag();
+  #endif
 }
 
 uint8_t HAL_get_reset_source(void) {

Marlin/src/HAL/LPC1768/HAL.h

@@ -48,9 +48,6 @@ extern "C" volatile uint32_t _millis;
 #include <pinmapping.h>
 #include <CDCSerial.h>
 
-// i2c uses 8-bit shifted address
-#define I2C_ADDRESS(A) ((A) << 1)
-
 //
 // Default graphical display delays
 //
@@ -198,9 +195,7 @@ int16_t PARSED_PIN_INDEX(const char code, const int16_t dval);
 void HAL_idletask();
 
 #define PLATFORM_M997_SUPPORT
-void flashFirmware(const int16_t);
-
-#define HAL_CAN_SET_PWM_FREQ   // This HAL supports PWM Frequency adjustment
+void flashFirmware(int16_t value);
 
 /**
  * set_pwm_frequency

Marlin/src/HAL/LPC1768/HAL_SPI.cpp

@@ -209,11 +209,11 @@
 
   }
 
-#endif // LPC_SOFTWARE_SPI
+#endif // ENABLED(LPC_SOFTWARE_SPI)
 
 void SPIClass::begin() { spiBegin(); }
 
-void SPIClass::beginTransaction(const SPISettings &cfg) {
+void SPIClass::beginTransaction(SPISettings cfg) {
   uint8_t spiRate;
   switch (cfg.spiRate()) {
     case 8000000: spiRate = 0; break;

Marlin/src/HAL/LPC1768/MarlinSerial.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/HAL/LPC1768/MarlinSerial.h

@@ -44,9 +44,10 @@ public:
   MarlinSerial(LPC_UART_TypeDef *UARTx) :
     HardwareSerial<RX_BUFFER_SIZE, TX_BUFFER_SIZE>(UARTx)
     #if ENABLED(EMERGENCY_PARSER)
-      , emergency_state(EmergencyParser::State::EP_RESET)
+       , emergency_state(EmergencyParser::State::EP_RESET)
     #endif
-    { }
+    {
+    }
 
   void end() {}
 

Marlin/src/HAL/LPC1768/Servo.h

@@ -60,7 +60,9 @@ class libServo: public Servo {
     if (attach(servo_info[servoIndex].Pin.nbr) >= 0) {    // try to reattach
       write(value);
       safe_delay(servo_delay[servoIndex]); // delay to allow servo to reach position
-      TERN_(DEACTIVATE_SERVOS_AFTER_MOVE, detach());
+      #if ENABLED(DEACTIVATE_SERVOS_AFTER_MOVE)
+        detach();
+      #endif
     }
 
   }

Marlin/src/HAL/LPC1768/eeprom_wired.cpp

@@ -1,85 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifdef TARGET_LPC1768
-
-#include "../../inc/MarlinConfig.h"
-
-#if USE_WIRED_EEPROM
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with implementations supplied by the framework.
- */
-
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
-
-#ifndef EEPROM_SIZE
-  #define EEPROM_SIZE           0x8000 // 32kB‬
-#endif
-
-size_t PersistentStore::capacity()    { return EEPROM_SIZE; }
-bool PersistentStore::access_finish() { return true; }
-
-bool PersistentStore::access_start() {
-  eeprom_init();
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    uint8_t v = *value;
-
-    // EEPROM has only ~100,000 write cycles,
-    // so only write bytes that have changed!
-    uint8_t * const p = (uint8_t * const)pos;
-    if (v != eeprom_read_byte(p)) {
-      eeprom_write_byte(p, v);
-      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  };
-
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  do {
-    // Read from external EEPROM
-    const uint8_t c = eeprom_read_byte((uint8_t*)pos);
-
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  } while (--size);
-  return false;
-}
-
-#endif // USE_WIRED_EEPROM
-#endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/fast_pwm.cpp

@@ -19,11 +19,12 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfigPre.h"
 
-#if NEEDS_HARDWARE_PWM // Specific meta-flag for features that mandate PWM
+#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_PWM
 
 #include <pwm.h>
 

Marlin/src/HAL/LPC1768/fastio.h

@@ -104,7 +104,7 @@
 /// set pin as output wrapper  -  reads the pin and sets the output to that value
 #define SET_OUTPUT(IO)        do{ _WRITE(IO, _READ(IO)); _SET_OUTPUT(IO); }while(0)
 // set pin as PWM
-#define SET_PWM               SET_OUTPUT
+#define SET_PWM(IO)           SET_OUTPUT(IO)
 
 /// check if pin is an input wrapper
 #define IS_INPUT(IO)          _IS_INPUT(IO)

Marlin/src/HAL/LPC1768/inc/Conditionals_post.h

@@ -21,6 +21,10 @@
  */
 #pragma once
 
-#if USE_FALLBACK_EEPROM
-  #define FLASH_EEPROM_EMULATION
+#if ENABLED(EEPROM_SETTINGS)
+  #undef USE_REAL_EEPROM
+  #define USE_EMULATED_EEPROM 1
+  #if DISABLED(FLASH_EEPROM_EMULATION)
+    #define SDCARD_EEPROM_EMULATION 1
+  #endif
 #endif

Marlin/src/HAL/LPC1768/inc/SanityCheck.h

@@ -174,7 +174,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
 //
 // Flag any i2c pin conflicts
 //
-#if ANY(HAS_I2C_DIGIPOT, DAC_STEPPER_CURRENT, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
+#if ANY(DIGIPOT_I2C, DIGIPOT_MCP4018, DAC_STEPPER_CURRENT, EXPERIMENTAL_I2CBUS, I2C_POSITION_ENCODERS, PCA9632, I2C_EEPROM)
   #define USEDI2CDEV_M 1  // <Arduino>/Wire.cpp
 
   #if USEDI2CDEV_M == 0         // P0_27 [D57] (AUX-1) .......... P0_28 [D58] (AUX-1)

Marlin/src/HAL/LPC1768/include/SPI.h

@@ -31,7 +31,7 @@
 class SPISettings {
   public:
     SPISettings(uint32_t speed, int, int) : spi_speed(speed) {};
-    uint32_t spiRate() const { return spi_speed; }
+    uint32_t spiRate() { return spi_speed; }
   private:
     uint32_t spi_speed;
 };
@@ -39,7 +39,7 @@ class SPISettings {
 class SPIClass {
   public:
     void begin();
-    void beginTransaction(const SPISettings&);
+    void beginTransaction(SPISettings);
     void endTransaction() {};
     uint8_t transfer(uint8_t data);
     uint16_t transfer16(uint16_t data);

Marlin/src/HAL/LPC1768/main.cpp

@@ -90,7 +90,7 @@ void HAL_init() {
 
   //debug_frmwrk_init();
   //_DBG("\n\nDebug running\n");
-  // Initialize the SD card chip select pins as soon as possible
+  // Initialise the SD card chip select pins as soon as possible
   #if PIN_EXISTS(SS)
     OUT_WRITE(SS_PIN, HIGH);
   #endif

Marlin/src/HAL/LPC1768/persistent_store_api.h

@@ -21,4 +21,6 @@
  */
 #pragma once
 
-void esp_wifi_init();
+#include "../shared/persistent_store_api.h"
+
+#define FLASH_EEPROM_EMULATION

Marlin/src/HAL/LPC1768/persistent_store_flash.cpp

@@ -36,11 +36,12 @@
  * 16Kb I/O buffers (intended to hold DMA USB and Ethernet data, but currently
  * unused).
  */
-#include "../../inc/MarlinConfig.h"
+#include "../../inc/MarlinConfigPre.h"
 
 #if ENABLED(FLASH_EEPROM_EMULATION)
 
-#include "../shared/eeprom_api.h"
+#include "persistent_store_api.h"
+#include "../../inc/MarlinConfig.h"
 
 extern "C" {
   #include <lpc17xx_iap.h>
@@ -58,8 +59,6 @@ static uint8_t ram_eeprom[EEPROM_SIZE] __attribute__((aligned(4))) = {0};
 static bool eeprom_dirty = false;
 static int current_slot = 0;
 
-size_t PersistentStore::capacity() { return EEPROM_SIZE; }
-
 bool PersistentStore::access_start() {
   uint32_t first_nblank_loc, first_nblank_val;
   IAP_STATUS_CODE status;
@@ -124,5 +123,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t
   return false;  // return true for any error
 }
 
+size_t PersistentStore::capacity() { return EEPROM_SIZE; }
+
 #endif // FLASH_EEPROM_EMULATION
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/persistent_store_sdcard.cpp

@@ -26,7 +26,7 @@
 
 #if ENABLED(SDCARD_EEPROM_EMULATION)
 
-#include "../shared/eeprom_api.h"
+#include "persistent_store_api.h"
 
 #include <chanfs/diskio.h>
 #include <chanfs/ff.h>
@@ -38,8 +38,6 @@ FATFS fat_fs;
 FIL eeprom_file;
 bool eeprom_file_open = false;
 
-size_t PersistentStore::capacity() { return 4096; } // 4KiB of Emulated EEPROM
-
 bool PersistentStore::access_start() {
   const char eeprom_erase_value = 0xFF;
   MSC_Aquire_Lock();
@@ -81,16 +79,21 @@ static void debug_rw(const bool write, int &pos, const uint8_t *value, const siz
   PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
   SERIAL_CHAR(' ');
   serialprintPGM(rw_str);
-  SERIAL_ECHOLNPAIR("_data(", pos, ",", int(value), ",", int(size), ", ...)");
+  SERIAL_ECHOPAIR("_data(", pos);
+  SERIAL_ECHOPAIR(",", (int)value);
+  SERIAL_ECHOPAIR(",", (int)size);
+  SERIAL_ECHOLNPGM(", ...)");
   if (total) {
     SERIAL_ECHOPGM(" f_");
     serialprintPGM(rw_str);
-    SERIAL_ECHOPAIR("()=", int(s), "\n size=", int(size), "\n bytes_");
+    SERIAL_ECHOPAIR("()=", (int)s);
+    SERIAL_ECHOPAIR("\n size=", size);
+    SERIAL_ECHOPGM("\n bytes_");
     serialprintPGM(write ? PSTR("written=") : PSTR("read="));
     SERIAL_ECHOLN(total);
   }
   else
-    SERIAL_ECHOLNPAIR(" f_lseek()=", int(s));
+    SERIAL_ECHOLNPAIR(" f_lseek()=", (int)s);
 }
 
 // File function return codes for type FRESULT. This goes away soon, but
@@ -170,5 +173,7 @@ bool PersistentStore::read_data(int &pos, uint8_t* value, const size_t size, uin
   return bytes_read != size;  // return true for any error
 }
 
+size_t PersistentStore::capacity() { return 4096; } // 4KiB of Emulated EEPROM
+
 #endif // SDCARD_EEPROM_EMULATION
 #endif // TARGET_LPC1768

Marlin/src/HAL/LPC1768/spi_pins.h

@@ -23,7 +23,7 @@
 
 #include "../../core/macros.h"
 
-#if BOTH(SDSUPPORT, HAS_GRAPHICAL_LCD) && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
+#if ENABLED(SDSUPPORT) && HAS_GRAPHICAL_LCD && (LCD_PINS_D4 == SCK_PIN || LCD_PINS_ENABLE == MOSI_PIN || DOGLCD_SCK == SCK_PIN || DOGLCD_MOSI == MOSI_PIN)
   #define LPC_SOFTWARE_SPI  // If the SD card and LCD adapter share the same SPI pins, then software SPI is currently
                             // needed due to the speed and mode required for communicating with each device being different.
                             // This requirement can be removed if the SPI access to these devices is updated to use

Marlin/src/HAL/LPC1768/timers.h

@@ -88,8 +88,8 @@ typedef uint32_t hal_timer_t;
 #define HAL_TEMP_TIMER_ISR() _HAL_TIMER_ISR(TEMP_TIMER_NUM)
 
 // Timer references by index
-#define STEP_TIMER_PTR _HAL_TIMER(STEP_TIMER_NUM)
-#define TEMP_TIMER_PTR _HAL_TIMER(TEMP_TIMER_NUM)
+#define STEP_TIMER _HAL_TIMER(STEP_TIMER_NUM)
+#define TEMP_TIMER _HAL_TIMER(TEMP_TIMER_NUM)
 
 // ------------------------
 // Public functions
@@ -99,23 +99,23 @@ void HAL_timer_start(const uint8_t timer_num, const uint32_t frequency);
 
 FORCE_INLINE static void HAL_timer_set_compare(const uint8_t timer_num, const hal_timer_t compare) {
   switch (timer_num) {
-    case 0: STEP_TIMER_PTR->MR0 = compare; break; // Stepper Timer Match Register 0
-    case 1: TEMP_TIMER_PTR->MR0 = compare; break; //    Temp Timer Match Register 0
+    case 0: STEP_TIMER->MR0 = compare; break; // Stepper Timer Match Register 0
+    case 1: TEMP_TIMER->MR0 = compare; break; //    Temp Timer Match Register 0
   }
 }
 
 FORCE_INLINE static hal_timer_t HAL_timer_get_compare(const uint8_t timer_num) {
   switch (timer_num) {
-    case 0: return STEP_TIMER_PTR->MR0; // Stepper Timer Match Register 0
-    case 1: return TEMP_TIMER_PTR->MR0; //    Temp Timer Match Register 0
+    case 0: return STEP_TIMER->MR0; // Stepper Timer Match Register 0
+    case 1: return TEMP_TIMER->MR0; //    Temp Timer Match Register 0
   }
   return 0;
 }
 
 FORCE_INLINE static hal_timer_t HAL_timer_get_count(const uint8_t timer_num) {
   switch (timer_num) {
-    case 0: return STEP_TIMER_PTR->TC; // Stepper Timer Count
-    case 1: return TEMP_TIMER_PTR->TC; //    Temp Timer Count
+    case 0: return STEP_TIMER->TC; // Stepper Timer Count
+    case 1: return TEMP_TIMER->TC; //    Temp Timer Count
   }
   return 0;
 }
@@ -154,8 +154,8 @@ FORCE_INLINE static bool HAL_timer_interrupt_enabled(const uint8_t timer_num) {
 
 FORCE_INLINE static void HAL_timer_isr_prologue(const uint8_t timer_num) {
   switch (timer_num) {
-    case 0: SBI(STEP_TIMER_PTR->IR, SBIT_CNTEN); break;
-    case 1: SBI(TEMP_TIMER_PTR->IR, SBIT_CNTEN); break;
+    case 0: SBI(STEP_TIMER->IR, SBIT_CNTEN); break;
+    case 1: SBI(TEMP_TIMER->IR, SBIT_CNTEN); break;
   }
 }
 

Marlin/src/HAL/LPC1768/usb_serial.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfigPre.h"

Marlin/src/HAL/LPC1768/watchdog.cpp

@@ -19,6 +19,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef TARGET_LPC1768
 
 #include "../../inc/MarlinConfig.h"

Marlin/src/HAL/SAMD51/HAL.cpp

@@ -18,6 +18,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef __SAMD51__
 
 #include "../../inc/MarlinConfig.h"
@@ -28,19 +29,71 @@
 // Local defines
 // ------------------------
 
-#define GET_TEMP_0_ADC()          TERN(HAS_TEMP_ADC_0,        PIN_TO_ADC(TEMP_0_PIN),       -1)
-#define GET_TEMP_1_ADC()          TERN(HAS_TEMP_ADC_1,        PIN_TO_ADC(TEMP_1_PIN),       -1)
-#define GET_TEMP_2_ADC()          TERN(HAS_TEMP_ADC_2,        PIN_TO_ADC(TEMP_2_PIN),       -1)
-#define GET_TEMP_3_ADC()          TERN(HAS_TEMP_ADC_3,        PIN_TO_ADC(TEMP_3_PIN),       -1)
-#define GET_TEMP_4_ADC()          TERN(HAS_TEMP_ADC_4,        PIN_TO_ADC(TEMP_4_PIN),       -1)
-#define GET_TEMP_5_ADC()          TERN(HAS_TEMP_ADC_5,        PIN_TO_ADC(TEMP_5_PIN),       -1)
-#define GET_TEMP_6_ADC()          TERN(HAS_TEMP_ADC_6,        PIN_TO_ADC(TEMP_6_PIN),       -1)
-#define GET_TEMP_7_ADC()          TERN(HAS_TEMP_ADC_7,        PIN_TO_ADC(TEMP_7_PIN),       -1)
-#define GET_PROBE_ADC()           TERN(HAS_TEMP_PROBE,        PIN_TO_ADC(TEMP_PROBE_PIN),   -1)
-#define GET_BED_ADC()             TERN(HAS_TEMP_ADC_BED,      PIN_TO_ADC(TEMP_BED_PIN),     -1)
-#define GET_CHAMBER_ADC()         TERN(HAS_TEMP_ADC_CHAMBER,  PIN_TO_ADC(TEMP_CHAMBER_PIN), -1)
-#define GET_FILAMENT_WIDTH_ADC()  TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN),     -1)
-#define GET_BUTTONS_ADC()         TERN(HAS_ADC_BUTTONS,       PIN_TO_ADC(ADC_KEYPAD_PIN),   -1)
+#if HAS_TEMP_ADC_0
+  #define GET_TEMP_0_ADC()          PIN_TO_ADC(TEMP_0_PIN)
+#else
+  #define GET_TEMP_0_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_1
+  #define GET_TEMP_1_ADC()          PIN_TO_ADC(TEMP_1_PIN)
+#else
+  #define GET_TEMP_1_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_2
+  #define GET_TEMP_2_ADC()          PIN_TO_ADC(TEMP_2_PIN)
+#else
+  #define GET_TEMP_2_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_3
+  #define GET_TEMP_3_ADC()          PIN_TO_ADC(TEMP_3_PIN)
+#else
+  #define GET_TEMP_3_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_4
+  #define GET_TEMP_4_ADC()          PIN_TO_ADC(TEMP_4_PIN)
+#else
+  #define GET_TEMP_4_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_5
+  #define GET_TEMP_5_ADC()          PIN_TO_ADC(TEMP_5_PIN)
+#else
+  #define GET_TEMP_5_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_6
+  #define GET_TEMP_6_ADC()          PIN_TO_ADC(TEMP_6_PIN)
+#else
+  #define GET_TEMP_6_ADC()          -1
+#endif
+#if HAS_TEMP_ADC_7
+  #define GET_TEMP_7_ADC()          PIN_TO_ADC(TEMP_7_PIN)
+#else
+  #define GET_TEMP_7_ADC()          -1
+#endif
+#if HAS_TEMP_PROBE
+  #define GET_PROBE_ADC()           PIN_TO_ADC(TEMP_PROBE_PIN)
+#else
+  #define GET_PROBE_ADC()           -1
+#endif
+#if HAS_TEMP_ADC_BED
+  #define GET_BED_ADC()             PIN_TO_ADC(TEMP_BED_PIN)
+#else
+  #define GET_BED_ADC()             -1
+#endif
+#if HAS_TEMP_ADC_CHAMBER
+  #define GET_CHAMBER_ADC()         PIN_TO_ADC(TEMP_CHAMBER_PIN)
+#else
+  #define GET_CHAMBER_ADC()         -1
+#endif
+#if ENABLED(FILAMENT_WIDTH_SENSOR)
+  #define GET_FILAMENT_WIDTH_ADC()  PIN_TO_ADC(FILWIDTH_PIN)
+#else
+  #define GET_FILAMENT_WIDTH_ADC()  -1
+#endif
+#if HAS_ADC_BUTTONS
+  #define GET_BUTTONS_ADC()         PIN_TO_ADC(ADC_KEYPAD_PIN)
+#else
+  #define GET_BUTTONS_ADC()         -1
+#endif
 
 #define IS_ADC_REQUIRED(n) ( \
      GET_TEMP_0_ADC() == n || GET_TEMP_1_ADC() == n || GET_TEMP_2_ADC() == n || GET_TEMP_3_ADC() == n \
@@ -52,22 +105,21 @@
   || GET_BUTTONS_ADC() == n        \
 )
 
-#if IS_ADC_REQUIRED(0)
-  #define ADC0_IS_REQUIRED 1
+#define ADC0_IS_REQUIRED    IS_ADC_REQUIRED(0)
+#define ADC1_IS_REQUIRED    IS_ADC_REQUIRED(1)
+#define ADC_IS_REQUIRED     (ADC0_IS_REQUIRED || ADC1_IS_REQUIRED)
+#if ADC0_IS_REQUIRED
   #define FIRST_ADC     0
 #else
   #define FIRST_ADC     1
 #endif
-#if IS_ADC_REQUIRED(1)
-  #define ADC1_IS_REQUIRED 1
+#if ADC1_IS_REQUIRED
   #define LAST_ADC      1
 #else
   #define LAST_ADC      0
 #endif
-#if ADC0_IS_REQUIRED || ADC1_IS_REQUIRED
-  #define ADC_IS_REQUIRED 1
-  #define DMA_IS_REQUIRED 1
-#endif
+
+#define DMA_IS_REQUIRED     ADC_IS_REQUIRED
 
 // ------------------------
 // Types
@@ -371,7 +423,9 @@ uint16_t HAL_adc_result;
 
 // HAL initialization task
 void HAL_init() {
-  TERN_(DMA_IS_REQUIRED, dma_init());
+  #if DMA_IS_REQUIRED
+    dma_init();
+  #endif
   #if ENABLED(SDSUPPORT)
     #if SD_CONNECTION_IS(ONBOARD) && PIN_EXISTS(SD_DETECT)
       SET_INPUT_PULLUP(SD_DETECT_PIN);

Marlin/src/HAL/SAMD51/HAL.h

@@ -113,6 +113,12 @@ typedef int8_t pin_t;
 void HAL_clear_reset_source();  // clear reset reason
 uint8_t HAL_get_reset_source(); // get reset reason
 
+//
+// EEPROM
+//
+void eeprom_write_byte(uint8_t *pos, unsigned char value);
+uint8_t eeprom_read_byte(uint8_t *pos);
+
 //
 // ADC
 //

Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp

@@ -18,6 +18,7 @@
  * along with this program.  If not, see <http://www.gnu.org/licenses/>.
  *
  */
+
 #ifdef ADAFRUIT_GRAND_CENTRAL_M4
 
 /**

Marlin/src/HAL/SAMD51/QSPIFlash.cpp

@@ -1,78 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- *
- * Based on Sprinter and grbl.
- * Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(QSPI_EEPROM)
-
-#include "QSPIFlash.h"
-
-#define INVALID_ADDR    0xffffffff
-#define SECTOR_OF(a)    (a & ~(SFLASH_SECTOR_SIZE - 1))
-#define OFFSET_OF(a)    (a & (SFLASH_SECTOR_SIZE - 1))
-
-Adafruit_SPIFlashBase * QSPIFlash::_flashBase = nullptr;
-uint8_t QSPIFlash::_buf[SFLASH_SECTOR_SIZE];
-uint32_t QSPIFlash::_addr = INVALID_ADDR;
-
-void QSPIFlash::begin() {
-  if (_flashBase != nullptr) return;
-
-  _flashBase = new Adafruit_SPIFlashBase(new Adafruit_FlashTransport_QSPI());
-  _flashBase->begin(NULL);
-}
-
-size_t QSPIFlash::size() {
-  return _flashBase->size();
-}
-
-uint8_t QSPIFlash::readByte(const uint32_t address) {
-  if (SECTOR_OF(address) == _addr) return _buf[OFFSET_OF(address)];
-
-  return _flashBase->read8(address);
-}
-
-void QSPIFlash::writeByte(const uint32_t address, const uint8_t value) {
-  uint32_t const sector_addr = SECTOR_OF(address);
-
-  // Page changes, flush old and update new cache
-  if (sector_addr != _addr) {
-    flush();
-    _addr = sector_addr;
-
-    // read a whole page from flash
-    _flashBase->readBuffer(sector_addr, _buf, SFLASH_SECTOR_SIZE);
-  }
-
-  _buf[OFFSET_OF(address)] = value;
-}
-
-void QSPIFlash::flush() {
-  if (_addr == INVALID_ADDR) return;
-
-  _flashBase->eraseSector(_addr / SFLASH_SECTOR_SIZE);
-  _flashBase->writeBuffer(_addr, _buf, SFLASH_SECTOR_SIZE);
-
-  _addr = INVALID_ADDR;
-}
-
-#endif // QSPI_EEPROM

Marlin/src/HAL/SAMD51/QSPIFlash.h

@@ -1,51 +0,0 @@
-/**
- * @file QSPIFlash.h
- *
- * The MIT License (MIT)
- *
- * Copyright (c) 2019 Ha Thach and Dean Miller for Adafruit Industries LLC
- *
- * Permission is hereby granted, free of charge, to any person obtaining a copy
- * of this software and associated documentation files (the "Software"), to deal
- * in the Software without restriction, including without limitation the rights
- * to use, copy, modify, merge, publish, distribute, sublicense, and/or sell
- * copies of the Software, and to permit persons to whom the Software is
- * furnished to do so, subject to the following conditions:
- *
- * The above copyright notice and this permission notice shall be included in
- * all copies or substantial portions of the Software.
- *
- * THE SOFTWARE IS PROVIDED "AS IS", WITHOUT WARRANTY OF ANY KIND, EXPRESS OR
- * IMPLIED, INCLUDING BUT NOT LIMITED TO THE WARRANTIES OF MERCHANTABILITY,
- * FITNESS FOR A PARTICULAR PURPOSE AND NONINFRINGEMENT. IN NO EVENT SHALL THE
- * AUTHORS OR COPYRIGHT HOLDERS BE LIABLE FOR ANY CLAIM, DAMAGES OR OTHER
- * LIABILITY, WHETHER IN AN ACTION OF CONTRACT, TORT OR OTHERWISE, ARISING FROM,
- * OUT OF OR IN CONNECTION WITH THE SOFTWARE OR THE USE OR OTHER DEALINGS IN
- * THE SOFTWARE.
- *
- * Derived from Adafruit_SPIFlash class with no SdFat references
- *
- */
-
-#pragma once
-
-#include <Adafruit_SPIFlashBase.h>
-
-// This class extends Adafruit_SPIFlashBase by adding caching support.
-//
-// This class will use 4096 Bytes of RAM as a block cache.
-class QSPIFlash {
-  public:
-    static void begin();
-    static size_t size();
-    static uint8_t readByte(const uint32_t address);
-    static void writeByte(const uint32_t address, const uint8_t v);
-    static void flush();
-
-  private:
-    static Adafruit_SPIFlashBase * _flashBase;
-    static uint8_t _buf[SFLASH_SECTOR_SIZE];
-    static uint32_t _addr;
-};
-
-extern QSPIFlash qspi;

Marlin/src/HAL/SAMD51/Servo.cpp

@@ -29,6 +29,7 @@
 
 #if HAS_SERVOS
 
+#include "../shared/Marduino.h"
 #include "../shared/servo.h"
 #include "../shared/servo_private.h"
 #include "SAMD51.h"
@@ -54,7 +55,7 @@
 static volatile int8_t currentServoIndex[_Nbr_16timers];    // index for the servo being pulsed for each timer (or -1 if refresh interval)
 
 FORCE_INLINE static uint16_t getTimerCount() {
-  Tc * const tc = TimerConfig[SERVO_TC].pTc;
+  Tc * const tc = TimerConfig[SERVO_TC].pTimer;
 
   tc->COUNT16.CTRLBSET.reg = TC_CTRLBCLR_CMD_READSYNC;
   SYNC(tc->COUNT16.SYNCBUSY.bit.CTRLB || tc->COUNT16.SYNCBUSY.bit.COUNT);
@@ -66,7 +67,7 @@ FORCE_INLINE static uint16_t getTimerCount() {
 // Interrupt handler for the TC
 // ----------------------------
 HAL_SERVO_TIMER_ISR() {
-  Tc * const tc = TimerConfig[SERVO_TC].pTc;
+  Tc * const tc = TimerConfig[SERVO_TC].pTimer;
   const timer16_Sequence_t timer =
     #ifndef _useTimer1
       _timer2
@@ -126,7 +127,7 @@ HAL_SERVO_TIMER_ISR() {
 }
 
 void initISR(timer16_Sequence_t timer) {
-  Tc * const tc = TimerConfig[SERVO_TC].pTc;
+  Tc * const tc = TimerConfig[SERVO_TC].pTimer;
   const uint8_t tcChannel = TIMER_TCCHANNEL(timer);
 
   static bool initialized = false;  // Servo TC has been initialized
@@ -203,7 +204,7 @@ void initISR(timer16_Sequence_t timer) {
 }
 
 void finISR(timer16_Sequence_t timer) {
-  Tc * const tc = TimerConfig[SERVO_TC].pTc;
+  Tc * const tc = TimerConfig[SERVO_TC].pTimer;
   const uint8_t tcChannel = TIMER_TCCHANNEL(timer);
 
   // Disable the match channel interrupt request

Marlin/src/HAL/SAMD51/eeprom_flash.cpp

@@ -1,95 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifdef __SAMD51__
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(FLASH_EEPROM_EMULATION)
-
-#include "../shared/eeprom_api.h"
-
-#define NVMCTRL_CMD(c)    do{                                                 \
-                            SYNC(!NVMCTRL->STATUS.bit.READY);                 \
-                            NVMCTRL->INTFLAG.bit.DONE = true;                 \
-                            NVMCTRL->CTRLB.reg = c | NVMCTRL_CTRLB_CMDEX_KEY; \
-                            SYNC(NVMCTRL->INTFLAG.bit.DONE);                  \
-                          }while(0)
-#define NVMCTRL_FLUSH()   do{                                           \
-                            if (NVMCTRL->SEESTAT.bit.LOAD)              \
-                              NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_SEEFLUSH);  \
-                          }while(0)
-
-size_t PersistentStore::capacity() {
-  const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
-                sblk = NVMCTRL->SEESTAT.bit.SBLK;
-
-  return   (!psz && !sblk)         ? 0
-         : (psz <= 2)              ? (0x200 << psz)
-         : (sblk == 1 || psz == 3) ?  4096
-         : (sblk == 2 || psz == 4) ?  8192
-         : (sblk <= 4 || psz == 5) ? 16384
-         : (sblk >= 9 && psz == 7) ? 65536
-                                   : 32768;
-}
-
-bool PersistentStore::access_start() {
-  NVMCTRL->SEECFG.reg = NVMCTRL_SEECFG_WMODE_BUFFERED;  // Buffered mode and segment reallocation active
-  if (NVMCTRL->SEESTAT.bit.RLOCK)
-    NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_USEE);    // Unlock E2P data write access
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  NVMCTRL_FLUSH();
-  if (!NVMCTRL->SEESTAT.bit.LOCK)
-    NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_LSEE);    // Lock E2P data write access
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    const uint8_t v = *value;
-    SYNC(NVMCTRL->SEESTAT.bit.BUSY);
-    if (NVMCTRL->INTFLAG.bit.SEESFULL)
-      NVMCTRL_FLUSH();      // Next write will trigger a sector reallocation. I need to flush 'pagebuffer'
-    ((volatile uint8_t *)SEEPROM_ADDR)[pos] = v;
-    SYNC(!NVMCTRL->INTFLAG.bit.SEEWRC);
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  while (size--) {
-    SYNC(NVMCTRL->SEESTAT.bit.BUSY);
-    uint8_t c = ((volatile uint8_t *)SEEPROM_ADDR)[pos];
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-#endif // FLASH_EEPROM_EMULATION
-#endif // __SAMD51__

Marlin/src/HAL/SAMD51/eeprom_qspi.cpp

@@ -1,71 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifdef __SAMD51__
-
-#include "../../inc/MarlinConfig.h"
-
-#if ENABLED(QSPI_EEPROM)
-
-#include "../shared/eeprom_api.h"
-
-#include "QSPIFlash.h"
-
-static bool initialized;
-
-size_t PersistentStore::capacity() { return qspi.size(); }
-
-bool PersistentStore::access_start() {
-  if (!initialized) {
-    qspi.begin();
-    initialized = true;
-  }
-  return true;
-}
-
-bool PersistentStore::access_finish() {
-  qspi.flush();
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    const uint8_t v = *value;
-    qspi.writeByte(pos, v);
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  while (size--) {
-    uint8_t c = qspi.readByte(pos);
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-#endif // QSPI_EEPROM
-#endif // __SAMD51__

Marlin/src/HAL/SAMD51/eeprom_wired.cpp

@@ -1,74 +0,0 @@
-/**
- * Marlin 3D Printer Firmware
- *
- * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
- * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
- *
- * This program is free software: you can redistribute it and/or modify
- * it under the terms of the GNU General Public License as published by
- * the Free Software Foundation, either version 3 of the License, or
- * (at your option) any later version.
- *
- * This program is distributed in the hope that it will be useful,
- * but WITHOUT ANY WARRANTY; without even the implied warranty of
- * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
- * GNU General Public License for more details.
- *
- * You should have received a copy of the GNU General Public License
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
- *
- */
-#ifdef __SAMD51__
-
-#include "../../inc/MarlinConfig.h"
-
-#if USE_WIRED_EEPROM
-
-/**
- * PersistentStore for Arduino-style EEPROM interface
- * with simple implementations supplied by Marlin.
- */
-
-#include "../shared/eeprom_if.h"
-#include "../shared/eeprom_api.h"
-
-size_t PersistentStore::capacity()    { return E2END + 1; }
-bool PersistentStore::access_finish() { return true; }
-
-bool PersistentStore::access_start() {
-  eeprom_init();
-  return true;
-}
-
-bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
-  while (size--) {
-    const uint8_t v = *value;
-    uint8_t * const p = (uint8_t * const)pos;
-    if (v != eeprom_read_byte(p)) {
-      eeprom_write_byte(p, v);
-      delay(2);
-      if (eeprom_read_byte(p) != v) {
-        SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
-        return true;
-      }
-    }
-    crc16(crc, &v, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
-  while (size--) {
-    uint8_t c = eeprom_read_byte((uint8_t*)pos);
-    if (writing) *value = c;
-    crc16(crc, &c, 1);
-    pos++;
-    value++;
-  }
-  return false;
-}
-
-#endif // USE_WIRED_EEPROM
-#endif // __SAMD51__

Marlin/src/HAL/SAMD51/fastio.h

@@ -100,9 +100,9 @@
                                   PORT->Group[port].DIRCLR.reg = MASK(pin);                           \
                                 }while(0)
 // Set pin as PWM (push pull)
-#define SET_PWM                 SET_OUTPUT
+#define SET_PWM(IO)             SET_OUTPUT(IO)
 // Set pin as PWM (open drain)
-#define SET_PWM_OD              SET_OUTPUT_OD
+#define SET_PWM_OD(IO)          SET_OUTPUT_OD(IO)
 
 // check if pin is an output
 #define IS_OUTPUT(IO)            ((PORT->Group[(EPortType)GET_SAMD_PORT(IO)].DIR.reg & MASK(GET_SAMD_PIN(IO))) \

Marlin/src/HAL/SAMD51/inc/Conditionals_post.h

@@ -21,8 +21,8 @@
  */
 #pragma once
 
-#if USE_FALLBACK_EEPROM
-  #define FLASH_EEPROM_EMULATION
-#elif EITHER(I2C_EEPROM, SPI_EEPROM)
-  #define USE_SHARED_EEPROM 1
+#if USE_EMULATED_EEPROM
+  #undef SRAM_EEPROM_EMULATION
+  #undef SDCARD_EEPROM_EMULATION
+  #define FLASH_EEPROM_EMULATION 1
 #endif

Marlin/src/HAL/SAMD51/inc/SanityCheck.h

@@ -35,10 +35,6 @@
   #error "OnBoard SPI BUS can't be shared with other devices."
 #endif
 
-#if SERVO_TC == RTC_TIMER_NUM
-  #error "Servos can't use RTC timer"
-#endif
-
 #if ENABLED(EMERGENCY_PARSER)
   #error "EMERGENCY_PARSER is not yet implemented for SAMD51. Disable EMERGENCY_PARSER to continue."
 #endif

Marlin/src/HAL/SAMD51/persistent_store_eeprom.cpp

@@ -0,0 +1,129 @@
+/**
+ * Marlin 3D Printer Firmware
+ *
+ * Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
+ * SAMD51 HAL developed by Giuliano Zaro (AKA GMagician)
+ *
+ * This program is free software: you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License as published by
+ * the Free Software Foundation, either version 3 of the License, or
+ * (at your option) any later version.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
+ * GNU General Public License for more details.
+ *
+ * You should have received a copy of the GNU General Public License
+ * along with this program.  If not, see <http://www.gnu.org/licenses/>.
+ *
+ */
+
+#ifdef __SAMD51__
+
+#include "../../inc/MarlinConfig.h"
+
+#if ENABLED(EEPROM_SETTINGS)
+
+#include "../shared/persistent_store_api.h"
+
+#if ENABLED(FLASH_EEPROM_EMULATION)
+  #define NVMCTRL_CMD(c)    do{                                                 \
+                              SYNC(!NVMCTRL->STATUS.bit.READY);                 \
+                              NVMCTRL->INTFLAG.bit.DONE = true;                 \
+                              NVMCTRL->CTRLB.reg = c | NVMCTRL_CTRLB_CMDEX_KEY; \
+                              SYNC(NVMCTRL->INTFLAG.bit.DONE);                  \
+                            }while(0)
+  #define NVMCTRL_FLUSH()   do{                                           \
+                              if (NVMCTRL->SEESTAT.bit.LOAD)              \
+                                NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_SEEFLUSH);  \
+                            }while(0)
+#endif
+
+bool PersistentStore::access_start() {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    NVMCTRL->SEECFG.reg = NVMCTRL_SEECFG_WMODE_BUFFERED;  // Buffered mode and segment reallocation active
+  #endif
+
+  return true;
+}
+
+bool PersistentStore::access_finish() {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    NVMCTRL_FLUSH();
+    if (!NVMCTRL->SEESTAT.bit.LOCK)
+      NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_LSEE);    // Lock E2P data write access
+  #endif
+
+  return true;
+}
+
+bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    if (NVMCTRL->SEESTAT.bit.RLOCK)
+      NVMCTRL_CMD(NVMCTRL_CTRLB_CMD_USEE);    // Unlock E2P data write access
+  #endif
+
+  while (size--) {
+    const uint8_t v = *value;
+    #if ENABLED(FLASH_EEPROM_EMULATION)
+      SYNC(NVMCTRL->SEESTAT.bit.BUSY);
+      if (NVMCTRL->INTFLAG.bit.SEESFULL)
+        NVMCTRL_FLUSH();      // Next write will trigger a sector reallocation. I need to flush 'pagebuffer'
+      ((volatile uint8_t *)SEEPROM_ADDR)[pos] = v;
+      SYNC(!NVMCTRL->INTFLAG.bit.SEEWRC);
+    #else
+      uint8_t * const p = (uint8_t * const)pos;
+      if (v != eeprom_read_byte(p)) {
+        eeprom_write_byte(p, v);
+        delay(2);
+        if (eeprom_read_byte(p) != v) {
+          SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
+          return true;
+        }
+      }
+    #endif
+    crc16(crc, &v, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+bool PersistentStore::read_data(int &pos, uint8_t* value, size_t size, uint16_t *crc, const bool writing/*=true*/) {
+  while (size--) {
+    uint8_t c;
+    #if ENABLED(FLASH_EEPROM_EMULATION)
+      SYNC(NVMCTRL->SEESTAT.bit.BUSY);
+      c = ((volatile uint8_t *)SEEPROM_ADDR)[pos];
+    #else
+      c = eeprom_read_byte((uint8_t*)pos);
+    #endif
+    if (writing) *value = c;
+    crc16(crc, &c, 1);
+    pos++;
+    value++;
+  }
+  return false;
+}
+
+size_t PersistentStore::capacity() {
+  #if ENABLED(FLASH_EEPROM_EMULATION)
+    const uint8_t psz = NVMCTRL->SEESTAT.bit.PSZ,
+                  sblk = NVMCTRL->SEESTAT.bit.SBLK;
+
+         if (!psz && !sblk)         return     0;
+    else if (psz <= 2)              return (0x200 << psz);
+    else if (sblk == 1 || psz == 3) return  4096;
+    else if (sblk == 2 || psz == 4) return  8192;
+    else if (sblk <= 4 || psz == 5) return 16384;
+    else if (sblk >= 9 && psz == 7) return 65536;
+    else                            return 32768;
+  #else
+    return E2END + 1;
+  #endif
+}
+
+#endif // EEPROM_SETTINGS
+
+#endif // __SAMD51__