jessikitty/Marlin
1
0
Fork 0
Code Issues Pull Requests Actions Packages Projects Releases Wiki Activity

Merge branch 'bugfix-2.0.x' into CrealityDwin2.0_Bleeding

Browse Source
This commit is contained in:
InsanityAutomation
2021-04-03 12:43:14 -04:00
parent 2e6d7308f6 dd76a50683
commit 7aecff2ba6
872 changed files with 25867 additions and 12110 deletions
Download Patch File Download Diff File Expand all files Collapse all files
.github/workflows/test-builds.yml
+1
View File
@@ -98,6 +98,7 @@ jobs:
# Non-working environment tests
#- at90usb1286_cdc
#- STM32F103CB_malyan
#- STM32F103RE
#- mks_robin_mini
steps:
Marlin/Configuration.h
+119 -26
View File
@@ -284,18 +284,13 @@
*/
//===========================================================================
//============================= DELTA Printer ===============================
//========================== DELTA / SCARA / TPARA ==========================
//===========================================================================
// For a Delta printer, start with one of the configuration files in the config/examples/delta directory
// from https://github.com/MarlinFirmware/Configurations/branches/all and customize for your machine.
//
//===========================================================================
//============================= SCARA Printer ===============================
//===========================================================================
// For a SCARA printer, start with one of the configuration files in the config/examples/SCARA directory
// from https://github.com/MarlinFirmware/Configurations/branches/all and customize for your machine.
// Download configurations from the link above and customize for your machine.
// Examples are located in config/examples/delta, .../SCARA, and .../TPARA.
//
//===========================================================================
// @section info
@@ -603,7 +598,7 @@
#elif ENABLED(SKRMiniE3V2)
#define MOTHERBOARD BOARD_BTT_SKR_MINI_E3_V2_0
#elif ENABLED(SKRE3Turbo)
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
#define MOTHERBOARD BOARD_BTT_SKR_E3_TURBO
#elif ANY(MachineEnder3Pro427, Creality427)
#define MOTHERBOARD BOARD_CREALITY_V427
#elif ANY(MachineEnder3V2, MachineEnder3Pro422, Creality422)
@@ -650,11 +645,11 @@
* Multi-Material Unit
* Set to one of these predefined models:
*
* PRUSA_MMU1 : Průša MMU1 (The "multiplexer" version)
* PRUSA_MMU2 : Průša MMU2
* PRUSA_MMU2S : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
* SMUFF_EMU_MMU2 : Technik Gegg SMUFF (Průša MMU2 emulation mode)
* SMUFF_EMU_MMU2S : Technik Gegg SMUFF (Průša MMU2S emulation mode)
* PRUSA_MMU1 : Průša MMU1 (The "multiplexer" version)
* PRUSA_MMU2 : Průša MMU2
* PRUSA_MMU2S : Průša MMU2S (Requires MK3S extruder with motion sensor, EXTRUDERS = 5)
* EXTENDABLE_EMU_MMU2 : MMU with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
* EXTENDABLE_EMU_MMU2S : MMUS with configurable number of filaments (ERCF, SMuFF or similar with Průša MMU2 compatible firmware)
*
* Requires NOZZLE_PARK_FEATURE to park print head in case MMU unit fails.
* See additional options in Configuration_adv.h.
@@ -828,8 +823,10 @@
#define AUTO_POWER_E_FANS
#define AUTO_POWER_CONTROLLERFAN
#define AUTO_POWER_CHAMBER_FAN
#define AUTO_POWER_COOLER_FAN
//#define AUTO_POWER_E_TEMP 50 // (°C) Turn on PSU if any extruder is over this temperature
//#define AUTO_POWER_CHAMBER_TEMP 30 // (°C) Turn on PSU if the chamber is over this temperature
//#define AUTO_POWER_COOLER_TEMP 26 // (°C) Turn on PSU if the cooler is over this temperature
#define POWER_TIMEOUT 30 // (s) Turn off power if the machine is idle for this duration
//#define POWER_OFF_DELAY 60 // (s) Delay of poweroff after M81 command. Useful to let fans run for extra time.
#endif
@@ -984,6 +981,7 @@
#define HEATER_6_MINTEMP 5
#define HEATER_7_MINTEMP 5
#define BED_MINTEMP 5
#define CHAMBER_MINTEMP 5
// Above this temperature the heater will be switched off.
// This can protect components from overheating, but NOT from shorts and failures.
@@ -1003,6 +1001,17 @@
#define HEATER_6_MAXTEMP 275
#define HEATER_7_MAXTEMP 275
#define BED_MAXTEMP 150
#define CHAMBER_MAXTEMP 60
/**
* Thermal Overshoot
* During heatup (and printing) the temperature can often "overshoot" the target by many degrees
* (especially before PID tuning). Setting the target temperature too close to MAXTEMP guarantees
* a MAXTEMP shutdown! Use these values to forbid temperatures being set too close to MAXTEMP.
*/
#define HOTEND_OVERSHOOT 15 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
#define BED_OVERSHOOT 10 // (°C) Forbid temperatures over MAXTEMP - OVERSHOOT
#define COOLER_OVERSHOOT 2 // (°C) Forbid temperatures closer than OVERSHOOT
//===========================================================================
//============================= PID Settings ================================
@@ -1138,7 +1147,51 @@
// FIND YOUR OWN: "M303 E-1 C8 S90" to run autotune on the bed at 90 degreesC for 8 cycles.
#endif // PIDTEMPBED
#if EITHER(PIDTEMP, PIDTEMPBED)
//===========================================================================
//==================== PID > Chamber Temperature Control ====================
//===========================================================================
/**
* PID Chamber Heating
*
* If this option is enabled set PID constants below.
* If this option is disabled, bang-bang will be used and CHAMBER_LIMIT_SWITCHING will enable
* hysteresis.
*
* The PID frequency will be the same as the extruder PWM.
* If PID_dT is the default, and correct for the hardware/configuration, that means 7.689Hz,
* which is fine for driving a square wave into a resistive load and does not significantly
* impact FET heating. This also works fine on a Fotek SSR-10DA Solid State Relay into a 200W
* heater. If your configuration is significantly different than this and you don't understand
* the issues involved, don't use chamber PID until someone else verifies that your hardware works.
*/
//#define PIDTEMPCHAMBER
//#define CHAMBER_LIMIT_SWITCHING
/**
* Max Chamber Power
* Applies to all forms of chamber control (PID, bang-bang, and bang-bang with hysteresis).
* When set to any value below 255, enables a form of PWM to the chamber heater that acts like a divider
* so don't use it unless you are OK with PWM on your heater. (See the comment on enabling PIDTEMPCHAMBER)
*/
#define MAX_CHAMBER_POWER 255 // limits duty cycle to chamber heater; 255=full current
#if ENABLED(PIDTEMPCHAMBER)
#define MIN_CHAMBER_POWER 0
//#define PID_CHAMBER_DEBUG // Sends debug data to the serial port.
// Lasko "MyHeat Personal Heater" (200w) modified with a Fotek SSR-10DA to control only the heating element
// and placed inside the small Creality printer enclosure tent.
//
#define DEFAULT_chamberKp 37.04
#define DEFAULT_chamberKi 1.40
#define DEFAULT_chamberKd 655.17
// M309 P37.04 I1.04 D655.17
// FIND YOUR OWN: "M303 E-2 C8 S50" to run autotune on the chamber at 50 degreesC for 8 cycles.
#endif // PIDTEMPCHAMBER
#if ANY(PIDTEMP, PIDTEMPBED, PIDTEMPCHAMBER)
//#define PID_DEBUG // Sends debug data to the serial port. Use 'M303 D' to toggle activation.
//#define PID_OPENLOOP // Puts PID in open loop. M104/M140 sets the output power from 0 to PID_MAX
//#define SLOW_PWM_HEATERS // PWM with very low frequency (roughly 0.125Hz=8s) and minimum state time of approximately 1s useful for heaters driven by a relay
@@ -1185,6 +1238,7 @@
#define THERMAL_PROTECTION_HOTENDS // Enable thermal protection for all extruders
#define THERMAL_PROTECTION_BED // Enable thermal protection for the heated bed
#define THERMAL_PROTECTION_CHAMBER // Enable thermal protection for the heated chamber
#define THERMAL_PROTECTION_COOLER // Enable thermal protection for the laser cooling
//===========================================================================
//============================= Mechanical Settings =========================
@@ -1809,14 +1863,14 @@
#define PROBING_MARGIN 10
#endif
// X and Y axis travel speed (mm/m) between probes
#define XY_PROBE_SPEED 10000
// X and Y axis travel speed (mm/min) between probes
#define XY_PROBE_FEEDRATE (175*60)
// Feedrate (mm/min) for the first approach when double-probing (MULTIPLE_PROBING == 2)
#define Z_PROBE_SPEED_FAST (4*60)
#define Z_PROBE_FEEDRATE_FAST (4*60)
// Feedrate (mm/min) for the "accurate" probe of each point
#define Z_PROBE_SPEED_SLOW (Z_PROBE_SPEED_FAST)
#define Z_PROBE_FEEDRATE_SLOW (Z_PROBE_FEEDRATE_FAST / 2)
/**
* Probe Activation Switch
@@ -1913,6 +1967,7 @@
#endif
#if ENABLED(PROBING_HEATERS_OFF)
//#define WAIT_FOR_BED_HEATER // Wait for bed to heat back up between probes (to improve accuracy)
//#define WAIT_FOR_HOTEND // Wait for hotend to heat back up between probes (to improve accuracy & prevent cold extrude)
#endif
//#define PROBING_FANS_OFF // Turn fans off when probing
//#define PROBING_STEPPERS_OFF // Turn steppers off (unless needed to hold position) when probing
@@ -2008,7 +2063,13 @@
//#define NO_MOTION_BEFORE_HOMING // Inhibit movement until all axes have been homed. Also enable HOME_AFTER_DEACTIVATE for extra safety.
//#define HOME_AFTER_DEACTIVATE // Require rehoming after steppers are deactivated. Also enable NO_MOTION_BEFORE_HOMING for extra safety.
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
/**
* Set Z_IDLE_HEIGHT if the Z-Axis moves on its own when steppers are disabled.
* - Use a low value (i.e., Z_MIN_POS) if the nozzle falls down to the bed.
* - Use a large value (i.e., Z_MAX_POS) if the bed falls down, away from the nozzle.
*/
//#define Z_IDLE_HEIGHT Z_HOME_POS
//#define UNKNOWN_Z_NO_RAISE // Don't raise Z (lower the bed) if Z is "unknown." For beds that fall when Z is powered off.
#if ANY(MachineEnder5)
@@ -2229,6 +2290,8 @@
#endif
#define FIL_RUNOUT_PULLUP // Use internal pullup for filament runout pins.
//#define FIL_RUNOUT_PULLDOWN // Use internal pulldown for filament runout pins.
//#define WATCH_ALL_RUNOUT_SENSORS // Execute runout script on any triggering sensor, not only for the active extruder.
// This is automatically enabled for MIXING_EXTRUDERs.
// Override individually if the runout sensors vary
//#define FIL_RUNOUT1_STATE LOW
@@ -2263,8 +2326,9 @@
//#define FIL_RUNOUT8_PULLUP
//#define FIL_RUNOUT8_PULLDOWN
// Set one or more commands to execute on filament runout.
// (After 'M412 H' Marlin will ask the host to handle the process.)
// Commands to execute on filament runout.
// With multiple runout sensors use the %c placeholder for the current tool in commands (e.g., "M600 T%c")
// NOTE: After 'M412 H1' the host handles filament runout and this script does not apply.
#define FILAMENT_RUNOUT_SCRIPT "M600"
// After a runout is detected, continue printing this length of filament
@@ -2449,6 +2513,9 @@
#if NONE(MachineCR10SPro, MachineCRX, MachineEnder5Plus, MachineCR10Max, MachineEnder4, OrigLCD) || ENABLED(GraphicLCD)
#define MESH_EDIT_GFX_OVERLAY // Display a graphics overlay while editing the mesh
#endif
#define UBL_HILBERT_CURVE // Use Hilbert distribution for less travel when probing multiple points
#define UBL_MESH_EDIT_MOVES_Z // Sophisticated users prefer no movement of nozzle
#define UBL_SAVE_ACTIVE_ON_M500 // Save the currently active mesh in the current slot on M500
@@ -2680,11 +2747,13 @@
#define PREHEAT_1_LABEL "PLA"
#define PREHEAT_1_TEMP_HOTEND 180
#define PREHEAT_1_TEMP_BED 70
#define PREHEAT_1_TEMP_CHAMBER 35
#define PREHEAT_1_FAN_SPEED 0 // Value from 0 to 255
#define PREHEAT_2_LABEL "ABS"
#define PREHEAT_2_TEMP_HOTEND 240
#define PREHEAT_2_TEMP_BED 110
#define PREHEAT_2_TEMP_CHAMBER 35
#define PREHEAT_2_FAN_SPEED 0 // Value from 0 to 255
/**
@@ -3232,6 +3301,11 @@
//
//#define REPRAP_DISCOUNT_FULL_GRAPHIC_SMART_CONTROLLER
//
// K.3D Full Graphic Smart Controller
//
//#define K3D_FULL_GRAPHIC_SMART_CONTROLLER
//
// ReprapWorld Graphical LCD
// https://reprapworld.com/?products_details&products_id/1218
@@ -3369,7 +3443,7 @@
//#define OLED_PANEL_TINYBOY2
//
// MKS OLED 1.3" 128×64 FULL GRAPHICS CONTROLLER
// MKS OLED 1.3" 128×64 Full Graphics Controller
// https://reprap.org/wiki/MKS_12864OLED
//
// Tiny, but very sharp OLED display
@@ -3378,7 +3452,7 @@
//#define MKS_12864OLED_SSD1306 // Uses the SSD1306 controller
//
// Zonestar OLED 128×64 FULL GRAPHICS CONTROLLER
// Zonestar OLED 128×64 Full Graphics Controller
//
//#define ZONESTAR_12864LCD // Graphical (DOGM) with ST7920 controller
//#define ZONESTAR_12864OLED // 1.3" OLED with SH1106 controller (default)
@@ -3395,10 +3469,15 @@
//#define OVERLORD_OLED
//
// FYSETC OLED 2.42" 128×64 FULL GRAPHICS CONTROLLER with WS2812 RGB
// FYSETC OLED 2.42" 128×64 Full Graphics Controller with WS2812 RGB
// Where to find : https://www.aliexpress.com/item/4000345255731.html
//#define FYSETC_242_OLED_12864 // Uses the SSD1309 controller
//
// K.3D SSD1309 OLED 2.42" 128×64 Full Graphics Controller
//
//#define K3D_242_OLED_CONTROLLER // Software SPI
//=============================================================================
//========================== Extensible UI Displays ===========================
//=============================================================================
@@ -3412,6 +3491,11 @@
//#define DGUS_LCD_UI_FYSETC
//#define DGUS_LCD_UI_HIPRECY
//#define DGUS_LCD_UI_MKS
#if ENABLED(DGUS_LCD_UI_MKS)
#define USE_MKS_GREEN_UI
#endif
//
// Touch-screen LCD for Malyan M200/M300 printers
//
@@ -3436,6 +3520,14 @@
//#define ANYCUBIC_LCD_DEBUG
#endif
//
// 320x240 Nextion 2.8" serial TFT Resistive Touch Screen NX3224T028
//
//#define NEXTION_TFT
#if ENABLED(NEXTION_TFT)
#define LCD_SERIAL_PORT 1 // Default is 1 for Nextion
#endif
//
// Third-party or vendor-customized controller interfaces.
// Sources should be installed in 'src/lcd/extui'.
@@ -3714,6 +3806,7 @@
// Use a single NeoPixel LED for static (background) lighting
//#define NEOPIXEL_BKGD_LED_INDEX 0 // Index of the LED to use
//#define NEOPIXEL_BKGD_COLOR { 255, 255, 255, 0 } // R, G, B, W
//#define NEOPIXEL_BKGD_ALWAYS_ON // Keep the backlight on when other NeoPixels are off
#endif
/**
Marlin/Configuration_adv.h
+321 -149
View File
@@ -113,6 +113,12 @@
#define CHAMBER_BETA 3950 // Beta value
#endif
#if TEMP_SENSOR_COOLER == 1000
#define COOLER_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
#define COOLER_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
#define COOLER_BETA 3950 // Beta value
#endif
#if TEMP_SENSOR_PROBE == 1000
#define PROBE_PULLUP_RESISTOR_OHMS 4700 // Pullup resistor
#define PROBE_RESISTANCE_25C_OHMS 100000 // Resistance at 25C
@@ -143,13 +149,17 @@
//
// Heated Chamber options
//
#if DISABLED(PIDTEMPCHAMBER)
#define CHAMBER_CHECK_INTERVAL 5000 // (ms) Interval between checks in bang-bang control
#if ENABLED(CHAMBER_LIMIT_SWITCHING)
#define CHAMBER_HYSTERESIS 2 // (°C) Only set the relevant heater state when ABS(T-target) > CHAMBER_HYSTERESIS
#endif
#endif
#if TEMP_SENSOR_CHAMBER
#define CHAMBER_MINTEMP 5
#define CHAMBER_MAXTEMP 60
#define TEMP_CHAMBER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
//#define CHAMBER_LIMIT_SWITCHING
//#define HEATER_CHAMBER_PIN 44 // Chamber heater on/off pin
//#define HEATER_CHAMBER_PIN P2_04 // Required heater on/off pin (example: SKR 1.4 Turbo HE1 plug)
//#define HEATER_CHAMBER_INVERTING false
//#define FAN1_PIN -1 // Remove the fan signal on pin P2_04 (example: SKR 1.4 Turbo HE1 plug)
//#define CHAMBER_FAN // Enable a fan on the chamber
#if ENABLED(CHAMBER_FAN)
@@ -175,6 +185,39 @@
#endif
#endif
//
// Laser Cooler options
//
#if TEMP_SENSOR_COOLER
#define COOLER_MINTEMP 8 // (°C)
#define COOLER_MAXTEMP 26 // (°C)
#define COOLER_DEFAULT_TEMP 16 // (°C)
#define TEMP_COOLER_HYSTERESIS 1 // (°C) Temperature proximity considered "close enough" to the target
#define COOLER_PIN 8 // Laser cooler on/off pin used to control power to the cooling element e.g. TEC, External chiller via relay
#define COOLER_INVERTING false
#define TEMP_COOLER_PIN 15 // Laser/Cooler temperature sensor pin. ADC is required.
#define COOLER_FAN // Enable a fan on the cooler, Fan# 0,1,2,3 etc.
#define COOLER_FAN_INDEX 0 // FAN number 0, 1, 2 etc. e.g.
#if ENABLED(COOLER_FAN)
#define COOLER_FAN_BASE 100 // Base Cooler fan PWM (0-255); turns on when Cooler temperature is above the target
#define COOLER_FAN_FACTOR 25 // PWM increase per °C above target
#endif
#endif
//
// Laser Coolant Flow Meter
//
//#define LASER_COOLANT_FLOW_METER
#if ENABLED(LASER_COOLANT_FLOW_METER)
#define FLOWMETER_PIN 20 // Requires an external interrupt-enabled pin (e.g., RAMPS 2,3,18,19,20,21)
#define FLOWMETER_PPL 5880 // (pulses/liter) Flow meter pulses-per-liter on the input pin
#define FLOWMETER_INTERVAL 1000 // (ms) Flow rate calculation interval in milliseconds
#define FLOWMETER_SAFETY // Prevent running the laser without the minimum flow rate set below
#if ENABLED(FLOWMETER_SAFETY)
#define FLOWMETER_MIN_LITERS_PER_MINUTE 1.5 // (liters/min) Minimum flow required when enabled
#endif
#endif
/**
* Thermal Protection provides additional protection to your printer from damage
* and fire. Marlin always includes safe min and max temperature ranges which
@@ -265,6 +308,20 @@
#define WATCH_CHAMBER_TEMP_INCREASE 2 // Degrees Celsius
#endif
/**
* Thermal Protection parameters for the laser cooler.
*/
#if ENABLED(THERMAL_PROTECTION_COOLER)
#define THERMAL_PROTECTION_COOLER_PERIOD 10 // Seconds
#define THERMAL_PROTECTION_COOLER_HYSTERESIS 3 // Degrees Celsius
/**
* Laser cooling watch settings (M143/M193).
*/
#define WATCH_COOLER_TEMP_PERIOD 60 // Seconds
#define WATCH_COOLER_TEMP_INCREASE 3 // Degrees Celsius
#endif
#if ENABLED(PIDTEMP)
// Add an experimental additional term to the heater power, proportional to the extrusion speed.
// A well-chosen Kc value should add just enough power to melt the increased material volume.
@@ -513,11 +570,15 @@
#define E6_AUTO_FAN_PIN -1
#define E7_AUTO_FAN_PIN -1
#define CHAMBER_AUTO_FAN_PIN -1
#define COOLER_AUTO_FAN_PIN -1
#define COOLER_FAN_PIN -1
#define EXTRUDER_AUTO_FAN_TEMPERATURE 50
#define EXTRUDER_AUTO_FAN_SPEED 255 // 255 == full speed
#define CHAMBER_AUTO_FAN_TEMPERATURE 30
#define CHAMBER_AUTO_FAN_SPEED 255
#define COOLER_AUTO_FAN_TEMPERATURE 18
#define COOLER_AUTO_FAN_SPEED 255
/**
* Part-Cooling Fan Multiplexer
@@ -545,12 +606,17 @@
#define INVERT_CASE_LIGHT false // Set true if Case Light is ON when pin is LOW
#define CASE_LIGHT_DEFAULT_ON true // Set default power-up state on
#define CASE_LIGHT_DEFAULT_BRIGHTNESS 255 // Set default power-up brightness (0-255, requires PWM pin)
//#define CASE_LIGHT_MAX_PWM 128 // Limit pwm
#define CASE_LIGHT_MENU // Add Case Light options to the LCD menu
//#define CASE_LIGHT_NO_BRIGHTNESS // Disable brightness control. Enable for non-PWM lighting.
//#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light, requires NEOPIXEL_LED.
#if ENABLED(CASE_LIGHT_USE_NEOPIXEL)
#define CASE_LIGHT_NEOPIXEL_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
//#define CASE_LIGHT_MAX_PWM 128 // Limit PWM duty cycle (0-255)
#if ENABLED(NEOPIXEL_LED)
//#define CASE_LIGHT_USE_NEOPIXEL // Use NeoPixel LED as case light
#endif
#if EITHER(RGB_LED, RGBW_LED)
//#define CASE_LIGHT_USE_RGB_LED // Use RGB / RGBW LED as case light
#endif
#if EITHER(CASE_LIGHT_USE_NEOPIXEL, CASE_LIGHT_USE_RGB_LED)
#define CASE_LIGHT_DEFAULT_COLOR { 255, 255, 255, 255 } // { Red, Green, Blue, White }
#endif
#endif
@@ -771,8 +837,8 @@
/**
* Use "HIGH SPEED" mode for probing.
* Danger: Disable if your probe sometimes fails. Only suitable for stable well-adjusted systems.
* This feature was designed for Delta's with very fast Z moves however higher speed cartesians may function
* If the machine cannot raise the probe fast enough after a trigger, it may enter a fault state.
* This feature was designed for Deltabots with very fast Z moves; however, higher speed Cartesians
* might be able to use it. If the machine can't raise Z fast enough the BLTouch may go into ALARM.
*/
#if NONE(MachineCR10Orig, LowMemoryBoard, MachineCRX)
#define BLTOUCH_HS_MODE
@@ -972,7 +1038,7 @@
// increments while checking for the contact to be broken.
#define BACKLASH_MEASUREMENT_LIMIT 0.5 // (mm)
#define BACKLASH_MEASUREMENT_RESOLUTION 0.005 // (mm)
#define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_SPEED_SLOW // (mm/min)
#define BACKLASH_MEASUREMENT_FEEDRATE Z_PROBE_FEEDRATE_SLOW // (mm/min)
#endif
#endif
#endif
@@ -1197,6 +1263,9 @@
#endif
#endif
// Insert a menu for preheating at the top level to allow for quick access
//#define PREHEAT_SHORTCUT_MENU_ITEM
#endif // HAS_LCD_MENU
#if HAS_DISPLAY
@@ -1307,7 +1376,6 @@
#if ENABLED(POWER_LOSS_RECOVERY)
#define PLR_ENABLED_DEFAULT false // Power Loss Recovery enabled by default. (Set with 'M413 Sn' & M500)
//#define BACKUP_POWER_SUPPLY // Backup power / UPS to move the steppers on power loss
//#define POWER_LOSS_RECOVER_ZHOME // Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_ZRAISE 2 // (mm) Z axis raise on resume (on power loss with UPS)
#if ANY(SKR14Turbo, SKR14) && DISABLED(SKR14_PowerLossKit)
#define POWER_LOSS_PIN -1
@@ -1322,6 +1390,12 @@
// Without a POWER_LOSS_PIN the following option helps reduce wear on the SD card,
// especially with "vase mode" printing. Set too high and vases cannot be continued.
#define POWER_LOSS_MIN_Z_CHANGE 0.05 // (mm) Minimum Z change before saving power-loss data
// Enable if Z homing is needed for proper recovery. 99.9% of the time this should be disabled!
//#define POWER_LOSS_RECOVER_ZHOME
#if ENABLED(POWER_LOSS_RECOVER_ZHOME)
//#define POWER_LOSS_ZHOME_POS { 0, 0 } // Safe XY position to home Z while avoiding objects on the bed
#endif
#endif
/**
@@ -1558,6 +1632,8 @@
#endif
#define STATUS_CHAMBER_ANIM // Use a second bitmap to indicate chamber heating
//#define STATUS_CUTTER_ANIM // Use a second bitmap to indicate spindle / laser active
//#define STATUS_COOLER_ANIM // Use a second bitmap to indicate laser cooling
//#define STATUS_FLOWMETER_ANIM // Use multiple bitmaps to indicate coolant flow
//#define STATUS_ALT_BED_BITMAP // Use the alternative bed bitmap
//#define STATUS_ALT_FAN_BITMAP // Use the alternative fan bitmap
//#define STATUS_FAN_FRAMES 3 // :[0,1,2,3,4] Number of fan animation frames
@@ -1591,12 +1667,12 @@
#define DGUS_UPDATE_INTERVAL_MS 500 // (ms) Interval between automatic screen updates
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_HIPRECY)
#if ANY(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS, DGUS_LCD_UI_HIPRECY)
#define DGUS_PRINT_FILENAME // Display the filename during printing
#define DGUS_PREHEAT_UI // Display a preheat screen during heatup
#if ENABLED(DGUS_LCD_UI_FYSETC)
//#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for UI_FYSETC
#if EITHER(DGUS_LCD_UI_FYSETC, DGUS_LCD_UI_MKS)
//#define DGUS_UI_MOVE_DIS_OPTION // Disabled by default for FYSETC and MKS
#else
#define DGUS_UI_MOVE_DIS_OPTION // Enabled by default for UI_HIPRECY
#endif
@@ -1639,6 +1715,8 @@
//#define LCD_HAOYU_FT810CB // Haoyu with 5" (800x480)
//#define LCD_ALEPHOBJECTS_CLCD_UI // Aleph Objects Color LCD UI
//#define LCD_FYSETC_TFT81050 // FYSETC with 5" (800x480)
//#define LCD_EVE3_50G // Matrix Orbital 5.0", 800x480, BT815
//#define LCD_EVE2_50G // Matrix Orbital 5.0", 800x480, FT813
// Correct the resolution if not using the stock TFT panel.
//#define TOUCH_UI_320x240
@@ -2114,6 +2192,12 @@
//#define SERIAL_STATS_DROPPED_RX
#endif
// Monitor RX buffer usage
// Dump an error to the serial port if the serial receive buffer overflows.
// If you see these errors, increase the RX_BUFFER_SIZE value.
// Not supported on all platforms.
//#define RX_BUFFER_MONITOR
/**
* Emergency Command Parser
*
@@ -2363,7 +2447,7 @@
#if AXIS_DRIVER_TYPE_X2(TMC26X)
#define X2_MAX_CURRENT 1000
#define X2_SENSE_RESISTOR 91
#define X2_MICROSTEPS 16
#define X2_MICROSTEPS X_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_Y(TMC26X)
@@ -2375,7 +2459,7 @@
#if AXIS_DRIVER_TYPE_Y2(TMC26X)
#define Y2_MAX_CURRENT 1000
#define Y2_SENSE_RESISTOR 91
#define Y2_MICROSTEPS 16
#define Y2_MICROSTEPS Y_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_Z(TMC26X)
@@ -2387,19 +2471,19 @@
#if AXIS_DRIVER_TYPE_Z2(TMC26X)
#define Z2_MAX_CURRENT 1000
#define Z2_SENSE_RESISTOR 91
#define Z2_MICROSTEPS 16
#define Z2_MICROSTEPS Z_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_Z3(TMC26X)
#define Z3_MAX_CURRENT 1000
#define Z3_SENSE_RESISTOR 91
#define Z3_MICROSTEPS 16
#define Z3_MICROSTEPS Z_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_Z4(TMC26X)
#define Z4_MAX_CURRENT 1000
#define Z4_SENSE_RESISTOR 91
#define Z4_MICROSTEPS 16
#define Z4_MICROSTEPS Z_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E0(TMC26X)
@@ -2411,43 +2495,43 @@
#if AXIS_DRIVER_TYPE_E1(TMC26X)
#define E1_MAX_CURRENT 1000
#define E1_SENSE_RESISTOR 91
#define E1_MICROSTEPS 16
#define E1_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E2(TMC26X)
#define E2_MAX_CURRENT 1000
#define E2_SENSE_RESISTOR 91
#define E2_MICROSTEPS 16
#define E2_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E3(TMC26X)
#define E3_MAX_CURRENT 1000
#define E3_SENSE_RESISTOR 91
#define E3_MICROSTEPS 16
#define E3_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E4(TMC26X)
#define E4_MAX_CURRENT 1000
#define E4_SENSE_RESISTOR 91
#define E4_MICROSTEPS 16
#define E4_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E5(TMC26X)
#define E5_MAX_CURRENT 1000
#define E5_SENSE_RESISTOR 91
#define E5_MICROSTEPS 16
#define E5_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E6(TMC26X)
#define E6_MAX_CURRENT 1000
#define E6_SENSE_RESISTOR 91
#define E6_MICROSTEPS 16
#define E6_MICROSTEPS E0_MICROSTEPS
#endif
#if AXIS_DRIVER_TYPE_E7(TMC26X)
#define E7_MAX_CURRENT 1000
#define E7_SENSE_RESISTOR 91
#define E7_MICROSTEPS 16
#define E7_MICROSTEPS E0_MICROSTEPS
#endif
#endif // TMC26X
@@ -2492,7 +2576,7 @@
#if AXIS_IS_TMC(X2)
#define X2_CURRENT 800
#define X2_CURRENT_HOME X2_CURRENT
#define X2_MICROSTEPS 16
#define X2_MICROSTEPS X_MICROSTEPS
#define X2_RSENSE 0.11
#define X2_CHAIN_POS -1
//#define X2_INTERPOLATE true
@@ -2510,7 +2594,7 @@
#if AXIS_IS_TMC(Y2)
#define Y2_CURRENT 800
#define Y2_CURRENT_HOME Y2_CURRENT
#define Y2_MICROSTEPS 16
#define Y2_MICROSTEPS Y_MICROSTEPS
#define Y2_RSENSE 0.11
#define Y2_CHAIN_POS -1
//#define Y2_INTERPOLATE true
@@ -2528,7 +2612,7 @@
#if AXIS_IS_TMC(Z2)
#define Z2_CURRENT 850
#define Z2_CURRENT_HOME Z2_CURRENT
#define Z2_MICROSTEPS 16
#define Z2_MICROSTEPS Z_MICROSTEPS
#define Z2_RSENSE 0.11
#define Z2_CHAIN_POS -1
//#define Z2_INTERPOLATE true
@@ -2537,7 +2621,7 @@
#if AXIS_IS_TMC(Z3)
#define Z3_CURRENT 800
#define Z3_CURRENT_HOME Z3_CURRENT
#define Z3_MICROSTEPS 16
#define Z3_MICROSTEPS Z_MICROSTEPS
#define Z3_RSENSE 0.11
#define Z3_CHAIN_POS -1
//#define Z3_INTERPOLATE true
@@ -2546,7 +2630,7 @@
#if AXIS_IS_TMC(Z4)
#define Z4_CURRENT 800
#define Z4_CURRENT_HOME Z4_CURRENT
#define Z4_MICROSTEPS 16
#define Z4_MICROSTEPS Z_MICROSTEPS
#define Z4_RSENSE 0.11
#define Z4_CHAIN_POS -1
//#define Z4_INTERPOLATE true
@@ -2570,7 +2654,7 @@
#if AXIS_IS_TMC(E2)
#define E2_CURRENT 800
#define E2_MICROSTEPS 16
#define E2_MICROSTEPS E0_MICROSTEPS
#define E2_RSENSE 0.11
#define E2_CHAIN_POS -1
//#define E2_INTERPOLATE true
@@ -2578,7 +2662,7 @@
#if AXIS_IS_TMC(E3)
#define E3_CURRENT 800
#define E3_MICROSTEPS 16
#define E3_MICROSTEPS E0_MICROSTEPS
#define E3_RSENSE 0.11
#define E3_CHAIN_POS -1
//#define E3_INTERPOLATE true
@@ -2586,7 +2670,7 @@
#if AXIS_IS_TMC(E4)
#define E4_CURRENT 800
#define E4_MICROSTEPS 16
#define E4_MICROSTEPS E0_MICROSTEPS
#define E4_RSENSE 0.11
#define E4_CHAIN_POS -1
//#define E4_INTERPOLATE true
@@ -2594,7 +2678,7 @@
#if AXIS_IS_TMC(E5)
#define E5_CURRENT 800
#define E5_MICROSTEPS 16
#define E5_MICROSTEPS E0_MICROSTEPS
#define E5_RSENSE 0.11
#define E5_CHAIN_POS -1
//#define E5_INTERPOLATE true
@@ -2602,7 +2686,7 @@
#if AXIS_IS_TMC(E6)
#define E6_CURRENT 800
#define E6_MICROSTEPS 16
#define E6_MICROSTEPS E0_MICROSTEPS
#define E6_RSENSE 0.11
#define E6_CHAIN_POS -1
//#define E6_INTERPOLATE true
@@ -2610,7 +2694,7 @@
#if AXIS_IS_TMC(E7)
#define E7_CURRENT 800
#define E7_MICROSTEPS 16
#define E7_MICROSTEPS E0_MICROSTEPS
#define E7_RSENSE 0.11
#define E7_CHAIN_POS -1
//#define E7_INTERPOLATE true
@@ -2897,138 +2981,138 @@
#endif
#if AXIS_IS_L64XX(X2)
#define X2_MICROSTEPS 128
#define X2_OVERCURRENT 2000
#define X2_STALLCURRENT 1500
#define X2_MAX_VOLTAGE 127
#define X2_CHAIN_POS -1
#define X2_SLEW_RATE 1
#define X2_MICROSTEPS X_MICROSTEPS
#define X2_OVERCURRENT 2000
#define X2_STALLCURRENT 1500
#define X2_MAX_VOLTAGE 127
#define X2_CHAIN_POS -1
#define X2_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Y)
#define Y_MICROSTEPS 128
#define Y_OVERCURRENT 2000
#define Y_STALLCURRENT 1500
#define Y_MAX_VOLTAGE 127
#define Y_CHAIN_POS -1
#define Y_SLEW_RATE 1
#define Y_MICROSTEPS 128
#define Y_OVERCURRENT 2000
#define Y_STALLCURRENT 1500
#define Y_MAX_VOLTAGE 127
#define Y_CHAIN_POS -1
#define Y_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Y2)
#define Y2_MICROSTEPS 128
#define Y2_OVERCURRENT 2000
#define Y2_STALLCURRENT 1500
#define Y2_MAX_VOLTAGE 127
#define Y2_CHAIN_POS -1
#define Y2_SLEW_RATE 1
#define Y2_MICROSTEPS Y_MICROSTEPS
#define Y2_OVERCURRENT 2000
#define Y2_STALLCURRENT 1500
#define Y2_MAX_VOLTAGE 127
#define Y2_CHAIN_POS -1
#define Y2_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Z)
#define Z_MICROSTEPS 128
#define Z_OVERCURRENT 2000
#define Z_STALLCURRENT 1500
#define Z_MAX_VOLTAGE 127
#define Z_CHAIN_POS -1
#define Z_SLEW_RATE 1
#define Z_MICROSTEPS 128
#define Z_OVERCURRENT 2000
#define Z_STALLCURRENT 1500
#define Z_MAX_VOLTAGE 127
#define Z_CHAIN_POS -1
#define Z_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Z2)
#define Z2_MICROSTEPS 128
#define Z2_OVERCURRENT 2000
#define Z2_STALLCURRENT 1500
#define Z2_MAX_VOLTAGE 127
#define Z2_CHAIN_POS -1
#define Z2_SLEW_RATE 1
#define Z2_MICROSTEPS Z_MICROSTEPS
#define Z2_OVERCURRENT 2000
#define Z2_STALLCURRENT 1500
#define Z2_MAX_VOLTAGE 127
#define Z2_CHAIN_POS -1
#define Z2_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Z3)
#define Z3_MICROSTEPS 128
#define Z3_OVERCURRENT 2000
#define Z3_STALLCURRENT 1500
#define Z3_MAX_VOLTAGE 127
#define Z3_CHAIN_POS -1
#define Z3_SLEW_RATE 1
#define Z3_MICROSTEPS Z_MICROSTEPS
#define Z3_OVERCURRENT 2000
#define Z3_STALLCURRENT 1500
#define Z3_MAX_VOLTAGE 127
#define Z3_CHAIN_POS -1
#define Z3_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(Z4)
#define Z4_MICROSTEPS 128
#define Z4_OVERCURRENT 2000
#define Z4_STALLCURRENT 1500
#define Z4_MAX_VOLTAGE 127
#define Z4_CHAIN_POS -1
#define Z4_SLEW_RATE 1
#define Z4_MICROSTEPS Z_MICROSTEPS
#define Z4_OVERCURRENT 2000
#define Z4_STALLCURRENT 1500
#define Z4_MAX_VOLTAGE 127
#define Z4_CHAIN_POS -1
#define Z4_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E0)
#define E0_MICROSTEPS 128
#define E0_OVERCURRENT 2000
#define E0_STALLCURRENT 1500
#define E0_MAX_VOLTAGE 127
#define E0_CHAIN_POS -1
#define E0_SLEW_RATE 1
#define E0_MICROSTEPS 128
#define E0_OVERCURRENT 2000
#define E0_STALLCURRENT 1500
#define E0_MAX_VOLTAGE 127
#define E0_CHAIN_POS -1
#define E0_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E1)
#define E1_MICROSTEPS 128
#define E1_OVERCURRENT 2000
#define E1_STALLCURRENT 1500
#define E1_MAX_VOLTAGE 127
#define E1_CHAIN_POS -1
#define E1_SLEW_RATE 1
#define E1_MICROSTEPS E0_MICROSTEPS
#define E1_OVERCURRENT 2000
#define E1_STALLCURRENT 1500
#define E1_MAX_VOLTAGE 127
#define E1_CHAIN_POS -1
#define E1_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E2)
#define E2_MICROSTEPS 128
#define E2_OVERCURRENT 2000
#define E2_STALLCURRENT 1500
#define E2_MAX_VOLTAGE 127
#define E2_CHAIN_POS -1
#define E2_SLEW_RATE 1
#define E2_MICROSTEPS E0_MICROSTEPS
#define E2_OVERCURRENT 2000
#define E2_STALLCURRENT 1500
#define E2_MAX_VOLTAGE 127
#define E2_CHAIN_POS -1
#define E2_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E3)
#define E3_MICROSTEPS 128
#define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500
#define E3_MAX_VOLTAGE 127
#define E3_CHAIN_POS -1
#define E3_SLEW_RATE 1
#define E3_MICROSTEPS E0_MICROSTEPS
#define E3_OVERCURRENT 2000
#define E3_STALLCURRENT 1500
#define E3_MAX_VOLTAGE 127
#define E3_CHAIN_POS -1
#define E3_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E4)
#define E4_MICROSTEPS 128
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#define E4_MAX_VOLTAGE 127
#define E4_CHAIN_POS -1
#define E4_SLEW_RATE 1
#define E4_MICROSTEPS E0_MICROSTEPS
#define E4_OVERCURRENT 2000
#define E4_STALLCURRENT 1500
#define E4_MAX_VOLTAGE 127
#define E4_CHAIN_POS -1
#define E4_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E5)
#define E5_MICROSTEPS 128
#define E5_OVERCURRENT 2000
#define E5_STALLCURRENT 1500
#define E5_MAX_VOLTAGE 127
#define E5_CHAIN_POS -1
#define E5_SLEW_RATE 1
#define E5_MICROSTEPS E0_MICROSTEPS
#define E5_OVERCURRENT 2000
#define E5_STALLCURRENT 1500
#define E5_MAX_VOLTAGE 127
#define E5_CHAIN_POS -1
#define E5_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E6)
#define E6_MICROSTEPS 128
#define E6_OVERCURRENT 2000
#define E6_STALLCURRENT 1500
#define E6_MAX_VOLTAGE 127
#define E6_CHAIN_POS -1
#define E6_SLEW_RATE 1
#define E6_MICROSTEPS E0_MICROSTEPS
#define E6_OVERCURRENT 2000
#define E6_STALLCURRENT 1500
#define E6_MAX_VOLTAGE 127
#define E6_CHAIN_POS -1
#define E6_SLEW_RATE 1
#endif
#if AXIS_IS_L64XX(E7)
#define E7_MICROSTEPS 128
#define E7_OVERCURRENT 2000
#define E7_STALLCURRENT 1500
#define E7_MAX_VOLTAGE 127
#define E7_CHAIN_POS -1
#define E7_SLEW_RATE 1
#define E7_MICROSTEPS E0_MICROSTEPS
#define E7_OVERCURRENT 2000
#define E7_STALLCURRENT 1500
#define E7_MAX_VOLTAGE 127
#define E7_CHAIN_POS -1
#define E7_SLEW_RATE 1
#endif
/**
@@ -3299,6 +3383,18 @@
#endif
#endif
/**
* Synchronous Laser Control with M106/M107
*
* Marlin normally applies M106/M107 fan speeds at a time "soon after" processing
* a planner block. This is too inaccurate for a PWM/TTL laser attached to the fan
* header (as with some add-on laser kits). Enable this option to set fan/laser
* speeds with much more exact timing for improved print fidelity.
*
* NOTE: This option sacrifices some cooling fan speed options.
*/
//#define LASER_SYNCHRONOUS_M106_M107
/**
* Coolant Control
*
@@ -3460,7 +3556,9 @@
//#define GCODE_QUOTED_STRINGS // Support for quoted string parameters
#endif
//#define MEATPACK // Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
// Support for MeatPack G-code compression (https://github.com/scottmudge/OctoPrint-MeatPack)
//#define MEATPACK_ON_SERIAL_PORT_1
//#define MEATPACK_ON_SERIAL_PORT_2
//#define GCODE_CASE_INSENSITIVE // Accept G-code sent to the firmware in lowercase
@@ -3507,14 +3605,15 @@
* Up to 25 may be defined, but the actual number is LCD-dependent.
*/
#if ANY(ABL_UBL, ABL_BI)
#define CUSTOM_USER_MENUS
#define CUSTOM_MENU_MAIN
#endif
#if ENABLED(CUSTOM_USER_MENUS)
//#define USER_SCRIPT_DONE "M117 User Script Done"
#define USER_SCRIPT_AUDIBLE_FEEDBACK
#define USER_SCRIPT_RETURN // Return to status screen after a script
#define CUSTOM_USER_MENU_TITLE "Leveling Tools"
#if ENABLED(CUSTOM_MENU_MAIN)
#define CUSTOM_MENU_CONFIG_TITLE "Leveling Tools"
//#define CUSTOM_MENU_CONFIG_SCRIPT_DONE "M117 Wireless Script Done"
#define CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK
#define CUSTOM_MENU_CONFIG_SCRIPT_RETURN // Return to status screen after a script
#define CUSTOM_MENU_CONFIG_ONLY_IDLE // Only show custom menu when the machine is idle
#if ENABLED(BedDC)
#define CommBedTmp "55"
@@ -3528,24 +3627,90 @@
#define DualZComm ""
#endif
#define USER_DESC_1 "Setup"
#define MAIN_MENU_ITEM_1_DESC "Setup"
#if (ENABLED(ABL_UBL))
#define USER_GCODE_1 "M190S" CommBedTmp "\nG28" DualZComm "\nG29P1\nG29P3\nG29S1\nG29S0\nG29F0.0\nG29A\nM104S215\nG28\nM109S215\nG1X150Y150F5000\nG1Z0\nM500\nM400\nM117 Set Z Offset"
#define MAIN_MENU_ITEM_1_GCODE "M190S" CommBedTmp "\nG28" DualZComm "\nG29P1\nG29P3\nG29S1\nG29S0\nG29F0.0\nG29A\nM104S215\nG28\nM109S215\nG1X150Y150F5000\nG1Z0\nM500\nM400\nM117 Set Z Offset"
#elif ENABLED(ABL_BI)
#define USER_GCODE_1 "M190S" CommBedTmp "\nG28" DualZComm "\nG29\nM400\nM104S215\nG28\nM109S215\nM420S1\nG1X100Y100F5000\nG1Z0\nM500\nM117 Set Z Offset"
#define MAIN_MENU_ITEM_1_GCODE "M190S" CommBedTmp "\nG28" DualZComm "\nG29\nM400\nM104S215\nG28\nM109S215\nM420S1\nG1X100Y100F5000\nG1Z0\nM500\nM117 Set Z Offset"
#endif
//#define MAIN_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action
#define MAIN_MENU_ITEM_2_DESC "PID Tune"
#define MAIN_MENU_ITEM_2_GCODE "M106S128\nM303C8S215E0U\nM500\nM117 PID Tune Done"
//#define MAIN_MENU_ITEM_2_CONFIRM // Show a confirmation dialog before this action
#define MAIN_MENU_ITEM_3_DESC "Prep for Z Adjust"
#define MAIN_MENU_ITEM_3_GCODE "M190S" CommBedTmp "\nM104S215\nG28\nG29L1\nG1 X100Y100F5000\nG1Z0"
//#define MAIN_MENU_ITEM_3_CONFIRM // Show a confirmation dialog before this action
#define MAIN_MENU_ITEM_4_DESC "Store Settings"
#define MAIN_MENU_ITEM_4_GCODE "M500\nM117 Settings Stored"
//#define MAIN_MENU_ITEM_4_CONFIRM // Show a confirmation dialog before this action
//#define MAIN_MENU_ITEM_5_DESC "Run Mesh Validation"
//#define MAIN_MENU_ITEM_5_GCODE "G26"
//#define MAIN_MENU_ITEM_5_CONFIRM // Show a confirmation dialog before this action
#endif
// Custom Menu: Configuration Menu
//#define CUSTOM_MENU_CONFIG
#if ENABLED(CUSTOM_MENU_CONFIG)
//#define CUSTOM_MENU_CONFIG_TITLE "Custom Commands"
#define CUSTOM_MENU_CONFIG_SCRIPT_DONE "M117 Wireless Script Done"
#define CUSTOM_MENU_CONFIG_SCRIPT_AUDIBLE_FEEDBACK
//#define CUSTOM_MENU_CONFIG_SCRIPT_RETURN // Return to status screen after a script
#define CUSTOM_MENU_CONFIG_ONLY_IDLE // Only show custom menu when the machine is idle
#define CONFIG_MENU_ITEM_1_DESC "Wifi ON"
#define CONFIG_MENU_ITEM_1_GCODE "M118 [ESP110] WIFI-STA pwd=12345678"
//#define CONFIG_MENU_ITEM_1_CONFIRM // Show a confirmation dialog before this action
#define CONFIG_MENU_ITEM_2_DESC "Bluetooth ON"
#define CONFIG_MENU_ITEM_2_GCODE "M118 [ESP110] BT pwd=12345678"
//#define CONFIG_MENU_ITEM_2_CONFIRM
//#define CONFIG_MENU_ITEM_3_DESC "Radio OFF"
//#define CONFIG_MENU_ITEM_3_GCODE "M118 [ESP110] OFF pwd=12345678"
//#define CONFIG_MENU_ITEM_3_CONFIRM
//#define CONFIG_MENU_ITEM_4_DESC "Wifi ????"
//#define CONFIG_MENU_ITEM_4_GCODE "M118 ????"
//#define CONFIG_MENU_ITEM_4_CONFIRM
//#define CONFIG_MENU_ITEM_5_DESC "Wifi ????"
//#define CONFIG_MENU_ITEM_5_GCODE "M118 ????"
//#define CONFIG_MENU_ITEM_5_CONFIRM
#endif
/**
* User-defined buttons to run custom G-code.
* Up to 25 may be defined.
*/
//#define CUSTOM_USER_BUTTONS
#if ENABLED(CUSTOM_USER_BUTTONS)
//#define BUTTON1_PIN -1
#if PIN_EXISTS(BUTTON1)
#define BUTTON1_HIT_STATE LOW // State of the triggered button. NC=LOW. NO=HIGH.
#define BUTTON1_WHEN_PRINTING false // Button allowed to trigger during printing?
#define BUTTON1_GCODE "G28"
#define BUTTON1_DESC "Homing" // Optional string to set the LCD status
#endif
#define USER_DESC_2 "PID Tune"
#define USER_GCODE_2 "M106S128\nM303C8S215E0U\nM500\nM117 PID Tune Done"
//#define BUTTON2_PIN -1
#if PIN_EXISTS(BUTTON2)
#define BUTTON2_HIT_STATE LOW
#define BUTTON2_WHEN_PRINTING false
#define BUTTON2_GCODE "M140 S" STRINGIFY(PREHEAT_1_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_1_TEMP_HOTEND)
#define BUTTON2_DESC "Preheat for " PREHEAT_1_LABEL
#endif
#define USER_DESC_3 "Prep for Z Adjust"
#define USER_GCODE_3 "M190S" CommBedTmp "\nM104S215\nG28\nG29L1\nG1 X100Y100F5000\nG1Z0"
#define USER_DESC_4 "Store Settings"
#define USER_GCODE_4 "M500\nM117 Settings Stored"
//#define USER_DESC_5 "Run Mesh Validation"
//#define USER_GCODE_5 "G26"
//#define BUTTON3_PIN -1
#if PIN_EXISTS(BUTTON3)
#define BUTTON3_HIT_STATE LOW
#define BUTTON3_WHEN_PRINTING false
#define BUTTON3_GCODE "M140 S" STRINGIFY(PREHEAT_2_TEMP_BED) "\nM104 S" STRINGIFY(PREHEAT_2_TEMP_HOTEND)
#define BUTTON3_DESC "Preheat for " PREHEAT_2_LABEL
#endif
#endif
/**
@@ -3910,3 +4075,10 @@
// Enable Marlin dev mode which adds some special commands
//#define MARLIN_DEV_MODE
/**
* Postmortem Debugging captures misbehavior and outputs the CPU status and backtrace to serial.
* When running in the debugger it will break for debugging. This is useful to help understand
* a crash from a remote location. Requires ~400 bytes of SRAM and 5Kb of flash.
*/
//#define POSTMORTEM_DEBUGGING
Marlin/Makefile
+3 -1
View File
@@ -219,7 +219,7 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1111)
else ifeq ($(HARDWARE_MOTHERBOARD),1112)
# MKS GEN L
else ifeq ($(HARDWARE_MOTHERBOARD),1113)
# zrib V2.0 control board (Chinese knock off RAMPS replica)
# zrib V2.0 control board (Chinese RAMPS replica)
else ifeq ($(HARDWARE_MOTHERBOARD),1114)
# BigTreeTech or BIQU KFB2.0
else ifeq ($(HARDWARE_MOTHERBOARD),1115)
@@ -323,6 +323,8 @@ else ifeq ($(HARDWARE_MOTHERBOARD),1203)
else ifeq ($(HARDWARE_MOTHERBOARD),1204)
# abee Scoovo X9H
else ifeq ($(HARDWARE_MOTHERBOARD),1205)
# Rambo ThinkerV2
else ifeq ($(HARDWARE_MOTHERBOARD),1206)
#
# Other ATmega1280, ATmega2560
Marlin/src/HAL/AVR/HAL.cpp
+1 -1
View File
@@ -25,7 +25,7 @@
#include "HAL.h"
#ifdef USBCON
DefaultSerial MSerial(false, Serial);
DefaultSerial1 MSerial0(false, Serial);
#ifdef BLUETOOTH
BTSerial btSerial(false, bluetoothSerial);
#endif
Marlin/src/HAL/AVR/HAL.h
+6 -6
View File
@@ -83,25 +83,25 @@ typedef int8_t pin_t;
// Serial ports
#ifdef USBCON
#include "../../core/serial_hook.h"
typedef ForwardSerial0Type< decltype(Serial) > DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#ifdef BLUETOOTH
typedef ForwardSerial0Type< decltype(bluetoothSerial) > BTSerial;
typedef ForwardSerial1Class< decltype(bluetoothSerial) > BTSerial;
extern BTSerial btSerial;
#endif
#define MYSERIAL0 TERN(BLUETOOTH, btSerial, MSerial)
#define MYSERIAL1 TERN(BLUETOOTH, btSerial, MSerial0)
#else
#if !WITHIN(SERIAL_PORT, -1, 3)
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#define MYSERIAL0 customizedSerial1
#define MYSERIAL1 customizedSerial1
#ifdef SERIAL_PORT_2
#if !WITHIN(SERIAL_PORT_2, -1, 3)
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
#define MYSERIAL1 customizedSerial2
#define MYSERIAL2 customizedSerial2
#endif
#endif
Marlin/src/HAL/AVR/HAL_SPI.cpp
+4 -4
View File
@@ -88,7 +88,7 @@ void spiBegin() {
}
/** SPI read data */
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte-- == 0) return;
SPDR = 0xFF;
for (uint16_t i = 0; i < nbyte; i++) {
@@ -107,7 +107,7 @@ void spiBegin() {
}
/** SPI send block */
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
@@ -215,7 +215,7 @@ void spiBegin() {
}
// Soft SPI read data
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
buf[i] = spiRec();
}
@@ -242,7 +242,7 @@ void spiBegin() {
}
// Soft SPI send block
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
spiSend(token);
for (uint16_t i = 0; i < 512; i++)
spiSend(buf[i]);
Marlin/src/HAL/AVR/MarlinSerial.h
+16 -27
View File
@@ -238,11 +238,11 @@
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
typedef Serial0Type< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT;
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT;
extern MSerialT customizedSerial1;
#ifdef SERIAL_PORT_2
typedef Serial0Type< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
extern MSerialT2 customizedSerial2;
#endif
@@ -252,17 +252,17 @@
template <uint8_t serial>
struct MMU2SerialCfg {
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = 32;
static constexpr unsigned int TX_SIZE = 32;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = false;
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
static constexpr unsigned int RX_SIZE = 32;
static constexpr unsigned int TX_SIZE = 32;
static constexpr bool RX_OVERRUNS = false;
};
typedef Serial0Type< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialT3;
typedef Serial1Class< MarlinSerial< MMU2SerialCfg<MMU2_SERIAL_PORT> > > MSerialT3;
extern MSerialT3 mmuSerial;
#endif
@@ -270,34 +270,23 @@
template <uint8_t serial>
struct LCDSerialCfg {
static constexpr int PORT = serial;
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
#if HAS_DGUS_LCD
static constexpr unsigned int RX_SIZE = DGUS_RX_BUFFER_SIZE;
static constexpr unsigned int TX_SIZE = DGUS_TX_BUFFER_SIZE;
static constexpr bool RX_OVERRUNS = ENABLED(SERIAL_STATS_RX_BUFFER_OVERRUNS);
#elif EITHER(ANYCUBIC_LCD_I3MEGA, ANYCUBIC_LCD_CHIRON)
static constexpr unsigned int RX_SIZE = 64;
static constexpr unsigned int TX_SIZE = 128;
static constexpr bool RX_OVERRUNS = false;
#else
static constexpr unsigned int RX_SIZE = 64;
static constexpr unsigned int TX_SIZE = 128;
static constexpr bool RX_OVERRUNS = false
#endif
static constexpr int PORT = serial;
static constexpr unsigned int RX_SIZE = TERN(HAS_DGUS_LCD, DGUS_RX_BUFFER_SIZE, 64);
static constexpr unsigned int TX_SIZE = TERN(HAS_DGUS_LCD, DGUS_TX_BUFFER_SIZE, 128);
static constexpr bool XONOFF = false;
static constexpr bool EMERGENCYPARSER = ENABLED(EMERGENCY_PARSER);
static constexpr bool DROPPED_RX = false;
static constexpr bool RX_FRAMING_ERRORS = false;
static constexpr bool MAX_RX_QUEUED = false;
static constexpr bool RX_OVERRUNS = BOTH(HAS_DGUS_LCD, SERIAL_STATS_RX_BUFFER_OVERRUNS);
};
typedef Serial0Type< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialT4;
typedef Serial1Class< MarlinSerial< LCDSerialCfg<LCD_SERIAL_PORT> > > MSerialT4;
extern MSerialT4 lcdSerial;
#endif
// Use the UART for Bluetooth in AT90USB configurations
#if defined(USBCON) && ENABLED(BLUETOOTH)
typedef Serial0Type<HardwareSerial> MSerialT5;
typedef Serial1Class<HardwareSerial> MSerialT5;
extern MSerialT5 bluetoothSerial;
#endif
Marlin/src/HAL/AVR/eeprom.cpp
+3 -3
View File
@@ -40,13 +40,13 @@ bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/AVR/fastio.cpp
+1 -1
View File
@@ -241,7 +241,7 @@ uint8_t extDigitalRead(const int8_t pin) {
*
* DC values -1.0 to 1.0. Negative duty cycle inverts the pulse.
*/
uint16_t set_pwm_frequency_hz(const float &hz, const float dca, const float dcb, const float dcc) {
uint16_t set_pwm_frequency_hz(const_float_t hz, const float dca, const float dcb, const float dcc) {
float count = 0;
if (hz > 0 && (dca || dcb || dcc)) {
count = float(F_CPU) / hz; // 1x prescaler, TOP for 16MHz base freq.
Marlin/src/HAL/AVR/fastio.h
+1 -1
View File
@@ -285,7 +285,7 @@ enum ClockSource2 : char {
*/
// Determine which harware PWMs are already in use
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN)
#define _PWM_CHK_FAN_B(P) (P == E0_AUTO_FAN_PIN || P == E1_AUTO_FAN_PIN || P == E2_AUTO_FAN_PIN || P == E3_AUTO_FAN_PIN || P == E4_AUTO_FAN_PIN || P == E5_AUTO_FAN_PIN || P == E6_AUTO_FAN_PIN || P == E7_AUTO_FAN_PIN || P == CHAMBER_AUTO_FAN_PIN || P == COOLER_AUTO_FAN_PIN)
#if PIN_EXISTS(CONTROLLER_FAN)
#define PWM_CHK_FAN_B(P) (_PWM_CHK_FAN_B(P) || P == CONTROLLER_FAN_PIN)
#else
Marlin/src/HAL/AVR/inc/SanityCheck.h
+7
View File
@@ -56,3 +56,10 @@
#if BOTH(HAS_TMC_SW_SERIAL, MONITOR_DRIVER_STATUS)
#error "MONITOR_DRIVER_STATUS causes performance issues when used with SoftwareSerial-connected drivers. Disable MONITOR_DRIVER_STATUS or use hardware serial to continue."
#endif
/**
* Postmortem debugging
*/
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not supported on AVR boards."
#endif
Marlin/src/HAL/DUE/DebugMonitor.cpp
-342
View File
@@ -1,342 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../core/macros.h"
#include "../../core/serial.h"
#include "../shared/backtrace/unwinder.h"
#include "../shared/backtrace/unwmemaccess.h"
#include <stdarg.h>
// Debug monitor that dumps to the Programming port all status when
// an exception or WDT timeout happens - And then resets the board
// All the Monitor routines must run with interrupts disabled and
// under an ISR execution context. That is why we cannot reuse the
// Serial interrupt routines or any C runtime, as we don't know the
// state we are when running them
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
// (re)initialize UART0 as a monitor output to 250000,n,8,1
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// Send character through UART with no interrupts
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
// Send String through UART
static void TX(const char* s) {
while (*s) TX(*s++);
}
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number thru UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number thru UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
// Dump a backtrace entry
static bool UnwReportOut(void* ctx, const UnwReport* bte) {
int* p = (int*)ctx;
(*p)++;
TX('#'); TXDec(*p); TX(" : ");
TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
TX('+'); TXDec(bte->address - bte->function);
TX(" PC:");TXHex(bte->address); TX('\n');
return true;
}
#ifdef UNW_DEBUG
void UnwPrintf(const char* format, ...) {
char dest[256];
va_list argptr;
va_start(argptr, format);
vsprintf(dest, format, argptr);
va_end(argptr);
TX(&dest[0]);
}
#endif
/* Table of function pointers for passing to the unwinder */
static const UnwindCallbacks UnwCallbacks = {
UnwReportOut,
UnwReadW,
UnwReadH,
UnwReadB
#ifdef UNW_DEBUG
, UnwPrintf
#endif
};
/**
* HardFaultHandler_C:
* This is called from the HardFault_HandlerAsm with a pointer the Fault stack
* as the parameter. We can then read the values from the stack and place them
* into local variables for ease of reading.
* We then read the various Fault Status and Address Registers to help decode
* cause of the fault.
* The function ends with a BKPT instruction to force control back into the debugger
*/
extern "C"
void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
static const char* causestr[] = {
"NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
};
UnwindFrame btf;
// Dump report to the Programming port (interrupts are DISABLED)
TXBegin();
TX("\n\n## Software Fault detected ##\n");
TX("Cause: "); TX(causestr[cause]); TX('\n');
TX("R0 : "); TXHex(((unsigned long)sp[0])); TX('\n');
TX("R1 : "); TXHex(((unsigned long)sp[1])); TX('\n');
TX("R2 : "); TXHex(((unsigned long)sp[2])); TX('\n');
TX("R3 : "); TXHex(((unsigned long)sp[3])); TX('\n');
TX("R12 : "); TXHex(((unsigned long)sp[4])); TX('\n');
TX("LR : "); TXHex(((unsigned long)sp[5])); TX('\n');
TX("PC : "); TXHex(((unsigned long)sp[6])); TX('\n');
TX("PSR : "); TXHex(((unsigned long)sp[7])); TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
// Hard Fault Status Register
TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
// Debug Fault Status Register
TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
// Auxiliary Fault Status Register
TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
// Bus Fault Address Register
TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
TX("ExcLR: "); TXHex(lr); TX('\n');
TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
btf.fp = btf.sp;
btf.lr = ((unsigned long)sp[5]);
btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace
TX("\nBacktrace:\n\n");
int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr);
// Disable all NVIC interrupts
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0xFFFFFFFF;
// Relocate VTOR table to default position
SCB->VTOR = 0;
// Disable USB
otg_disable();
// Restart watchdog
WDT_Restart(WDT);
// Reset controller
NVIC_SystemReset();
for (;;) WDT_Restart(WDT);
}
__attribute__((naked)) void NMI_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#0")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void HardFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#1")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void MemManage_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#2")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void BusFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#3")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void UsageFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#4")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void DebugMon_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#5")
A("b HardFault_HandlerC")
);
}
/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
__attribute__((naked)) void WDT_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#6")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void RSTC_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#7")
A("b HardFault_HandlerC")
);
}
#endif // ARDUINO_ARCH_SAM
Marlin/src/HAL/DUE/HAL.cpp
+11 -8
View File
@@ -40,6 +40,8 @@ uint16_t HAL_adc_result;
// Public functions
// ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task
void HAL_init() {
// Initialize the USB stack
@@ -47,6 +49,7 @@ void HAL_init() {
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
usb_task_init();
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
}
// HAL idle task
@@ -103,17 +106,17 @@ uint16_t HAL_adc_get_result() {
}
// Forward the default serial ports
#if ANY_SERIAL_IS(0)
DefaultSerial MSerial(false, Serial);
#if USING_HW_SERIAL0
DefaultSerial1 MSerial0(false, Serial);
#endif
#if ANY_SERIAL_IS(1)
DefaultSerial1 MSerial1(false, Serial1);
#if USING_HW_SERIAL1
DefaultSerial2 MSerial1(false, Serial1);
#endif
#if ANY_SERIAL_IS(2)
DefaultSerial2 MSerial2(false, Serial2);
#if USING_HW_SERIAL2
DefaultSerial3 MSerial2(false, Serial2);
#endif
#if ANY_SERIAL_IS(3)
DefaultSerial3 MSerial3(false, Serial3);
#if USING_HW_SERIAL3
DefaultSerial4 MSerial3(false, Serial3);
#endif
#endif // ARDUINO_ARCH_SAM
Marlin/src/HAL/DUE/HAL.h
+13 -14
View File
@@ -38,33 +38,32 @@
#include "../../core/serial_hook.h"
typedef ForwardSerial0Type< decltype(Serial) > DefaultSerial;
typedef ForwardSerial0Type< decltype(Serial1) > DefaultSerial1;
typedef ForwardSerial0Type< decltype(Serial2) > DefaultSerial2;
typedef ForwardSerial0Type< decltype(Serial3) > DefaultSerial3;
extern DefaultSerial MSerial;
extern DefaultSerial1 MSerial1;
extern DefaultSerial2 MSerial2;
extern DefaultSerial3 MSerial3;
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
extern DefaultSerial1 MSerial0;
extern DefaultSerial2 MSerial1;
extern DefaultSerial3 MSerial2;
extern DefaultSerial4 MSerial3;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
// Define MYSERIAL0/1 before MarlinSerial includes!
// Define MYSERIAL1/2 before MarlinSerial includes!
#if SERIAL_PORT == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL0 customizedSerial1
#define MYSERIAL1 customizedSerial1
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "The required SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1 || ENABLED(EMERGENCY_PARSER)
#define MYSERIAL1 customizedSerial2
#define MYSERIAL2 customizedSerial2
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
Marlin/src/HAL/DUE/HAL_MinSerial.cpp
+91
View File
@@ -0,0 +1,91 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef ARDUINO_ARCH_SAM
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include <stdarg.h>
static void TXBegin() {
// Disable UART interrupt in NVIC
NVIC_DisableIRQ( UART_IRQn );
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
__DSB();
__ISB();
// Disable clock
pmc_disable_periph_clk( ID_UART );
// Configure PMC
pmc_enable_periph_clk( ID_UART );
// Disable PDC channel
UART->UART_PTCR = UART_PTCR_RXTDIS | UART_PTCR_TXTDIS;
// Reset and disable receiver and transmitter
UART->UART_CR = UART_CR_RSTRX | UART_CR_RSTTX | UART_CR_RXDIS | UART_CR_TXDIS;
// Configure mode: 8bit, No parity, 1 bit stop
UART->UART_MR = UART_MR_CHMODE_NORMAL | US_MR_CHRL_8_BIT | US_MR_NBSTOP_1_BIT | UART_MR_PAR_NO;
// Configure baudrate (asynchronous, no oversampling) to BAUDRATE bauds
UART->UART_BRGR = (SystemCoreClock / (BAUDRATE << 4));
// Enable receiver and transmitter
UART->UART_CR = UART_CR_RXEN | UART_CR_TXEN;
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
while (!(UART->UART_SR & UART_SR_TXRDY)) { WDT_Restart(WDT); sw_barrier(); };
UART->UART_THR = c;
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE)
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_SAM
Marlin/src/HAL/DUE/HAL_SPI.cpp
+15 -15
View File
@@ -56,8 +56,8 @@
#pragma GCC optimize (3)
typedef uint8_t (*pfnSpiTransfer)(uint8_t b);
typedef void (*pfnSpiRxBlock)(uint8_t* buf, uint32_t nbyte);
typedef void (*pfnSpiTxBlock)(const uint8_t* buf, uint32_t nbyte);
typedef void (*pfnSpiRxBlock)(uint8_t *buf, uint32_t nbyte);
typedef void (*pfnSpiTxBlock)(const uint8_t *buf, uint32_t nbyte);
/* ---------------- Macros to be able to access definitions from asm */
#define _PORT(IO) DIO ## IO ## _WPORT
@@ -270,7 +270,7 @@
static pfnSpiTransfer spiTransferTx = (pfnSpiTransfer)spiTransferX;
// Block transfers run at ~8 .. ~10Mhz - Tx version (Rx data discarded)
static void spiTxBlock0(const uint8_t* ptr, uint32_t todo) {
static void spiTxBlock0(const uint8_t *ptr, uint32_t todo) {
uint32_t MOSI_PORT_PLUS30 = ((uint32_t) PORT(SD_MOSI_PIN)) + 0x30; /* SODR of port */
uint32_t MOSI_MASK = PIN_MASK(SD_MOSI_PIN);
uint32_t SCK_PORT_PLUS30 = ((uint32_t) PORT(SD_SCK_PIN)) + 0x30; /* SODR of port */
@@ -349,7 +349,7 @@
);
}
static void spiRxBlock0(uint8_t* ptr, uint32_t todo) {
static void spiRxBlock0(uint8_t *ptr, uint32_t todo) {
uint32_t bin = 0;
uint32_t work = 0;
uint32_t BITBAND_MISO_PORT = BITBAND_ADDRESS( ((uint32_t)PORT(SD_MISO_PIN))+0x3C, PIN_SHIFT(SD_MISO_PIN)); /* PDSR of port in bitband area */
@@ -425,13 +425,13 @@
);
}
static void spiTxBlockX(const uint8_t* buf, uint32_t todo) {
static void spiTxBlockX(const uint8_t *buf, uint32_t todo) {
do {
(void)spiTransferTx(*buf++);
} while (--todo);
}
static void spiRxBlockX(uint8_t* buf, uint32_t todo) {
static void spiRxBlockX(uint8_t *buf, uint32_t todo) {
do {
*buf++ = spiTransferRx(0xFF);
} while (--todo);
@@ -463,7 +463,7 @@
return b;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte) {
_SS_WRITE(LOW);
WRITE(SD_MOSI_PIN, HIGH); // Output 1s 1
@@ -478,7 +478,7 @@
_SS_WRITE(HIGH);
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
_SS_WRITE(LOW);
(void)spiTransferTx(token);
spiTxBlock(buf, 512);
@@ -645,7 +645,7 @@
}
// Read from SPI into buffer
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (!nbyte) return;
--nbyte;
for (int i = 0; i < nbyte; i++) {
@@ -668,7 +668,7 @@
//DELAY_US(1U);
}
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
if (!nbyte) return;
--nbyte;
for (size_t i = 0; i < nbyte; i++) {
@@ -689,7 +689,7 @@
FLUSH_RX();
}
void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {
void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {
if (!nbyte) return;
--nbyte;
for (size_t i = 0; i < nbyte; i++) {
@@ -702,7 +702,7 @@
}
// Write from buffer to SPI
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI0->SPI_TDR = (uint32_t)token | SPI_PCS(SPI_CHAN);
WHILE_TX(0);
//WHILE_RX(0);
@@ -801,19 +801,19 @@
uint8_t spiRec() { return (uint8_t)spiTransfer(0xFF); }
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
for (int i = 0; i < nbyte; i++)
buf[i] = spiTransfer(0xFF);
}
void spiSend(uint8_t data) { spiTransfer(data); }
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
spiTransfer(buf[i]);
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
spiTransfer(token);
for (uint16_t i = 0; i < 512; i++)
spiTransfer(buf[i]);
Marlin/src/HAL/DUE/MarlinSerial.cpp
+1 -1
View File
@@ -476,7 +476,7 @@ void MarlinSerial<Cfg>::flushTX() {
// If not using the USB port as serial port
#if SERIAL_PORT >= 0
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
template class MarlinSerial< MarlinSerialCfg<SERIAL_PORT> >;
MSerialT customizedSerial1(MarlinSerialCfg<SERIAL_PORT>::EMERGENCYPARSER);
#endif
Marlin/src/HAL/DUE/MarlinSerial.h
+3 -3
View File
@@ -140,12 +140,12 @@ struct MarlinSerialCfg {
static constexpr bool MAX_RX_QUEUED = ENABLED(SERIAL_STATS_MAX_RX_QUEUED);
};
#if SERIAL_PORT >= 0
typedef Serial0Type< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT;
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT> > > MSerialT;
extern MSerialT customizedSerial1;
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
typedef Serial0Type< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
typedef Serial1Class< MarlinSerial< MarlinSerialCfg<SERIAL_PORT_2> > > MSerialT2;
extern MSerialT2 customizedSerial2;
#endif
Marlin/src/HAL/DUE/MarlinSerialUSB.cpp
+5 -6
View File
@@ -92,12 +92,11 @@ int MarlinSerialUSB::read() {
return c;
}
bool MarlinSerialUSB::available() {
/* If Pending chars */
return pending_char >= 0 ||
/* or USB CDC enumerated and configured on the PC side and some
bytes where sent to us */
(usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
int MarlinSerialUSB::available() {
if (pending_char > 0) return pending_char;
return pending_char == 0 ||
// or USB CDC enumerated and configured on the PC side and some bytes where sent to us */
(usb_task_cdc_isenabled() && udi_cdc_is_rx_ready());
}
void MarlinSerialUSB::flush() { }
Marlin/src/HAL/DUE/MarlinSerialUSB.h
+2 -2
View File
@@ -39,7 +39,7 @@ struct MarlinSerialUSB {
int peek();
int read();
void flush();
bool available();
int available();
size_t write(const uint8_t c);
#if ENABLED(SERIAL_STATS_DROPPED_RX)
@@ -50,7 +50,7 @@ struct MarlinSerialUSB {
FORCE_INLINE int rxMaxEnqueued() { return 0; }
#endif
};
typedef Serial0Type<MarlinSerialUSB> MSerialT;
typedef Serial1Class<MarlinSerialUSB> MSerialT;
#if SERIAL_PORT == -1
extern MSerialT customizedSerial1;
Marlin/src/HAL/DUE/eeprom_flash.cpp
+10 -11
View File
@@ -139,7 +139,7 @@ static void ee_Dump(const int page, const void* data) {
#ifdef EE_EMU_DEBUG
const uint8_t* c = (const uint8_t*) data;
const uint8_t *c = (const uint8_t*) data;
char buffer[80];
sprintf_P(buffer, PSTR("Page: %d (0x%04x)\n"), page, page);
@@ -293,8 +293,8 @@ static bool ee_PageWrite(uint16_t page, const void* data) {
ee_Dump(-page, data);
// Calculate count of changed bits
uint32_t* p1 = (uint32_t*)addrflash;
uint32_t* p2 = (uint32_t*)data;
uint32_t *p1 = (uint32_t*)addrflash;
uint32_t *p2 = (uint32_t*)data;
int count = 0;
for (i =0; i<PageSize >> 2; i++) {
if (p1[i] != p2[i]) {
@@ -470,7 +470,7 @@ static uint8_t ee_Read(uint32_t address, bool excludeRAMBuffer=false) {
for (int page = curPage - 1; page >= 0; --page) {
// Get a pointer to the flash page
uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint16_t i = 0;
while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -550,7 +550,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
for (int page = curPage - 1; page >= 0; --page) {
// Get a pointer to the flash page
uint8_t* pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint8_t *pflash = (uint8_t*)getFlashStorage(page + curGroup * PagesPerGroup);
uint16_t i = 0;
while (i <= (PageSize - 4)) { /* (PageSize - 4) because otherwise, there is not enough room for data and headers */
@@ -589,7 +589,7 @@ static uint32_t ee_GetAddrRange(uint32_t address, bool excludeRAMBuffer=false) {
}
static bool ee_IsPageClean(int page) {
uint32_t* pflash = (uint32_t*) getFlashStorage(page);
uint32_t *pflash = (uint32_t*) getFlashStorage(page);
for (uint16_t i = 0; i < (PageSize >> 2); ++i)
if (*pflash++ != 0xFFFFFFFF) return false;
return true;
@@ -599,7 +599,7 @@ static bool ee_Flush(uint32_t overrideAddress = 0xFFFFFFFF, uint8_t overrideData
// Check if RAM buffer has something to be written
bool isEmpty = true;
uint32_t* p = (uint32_t*) &buffer[0];
uint32_t *p = (uint32_t*) &buffer[0];
for (uint16_t j = 0; j < (PageSize >> 2); j++) {
if (*p++ != 0xFFFFFFFF) {
isEmpty = false;
@@ -976,14 +976,13 @@ bool PersistentStore::access_start() { ee_Init(); return true; }
bool PersistentStore::access_finish() { ee_Flush(); return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != ee_Read(uint32_t(p))) {
if (v != ee_Read(uint32_t(p))) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
ee_Write(uint32_t(p), v);
delay(2);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (ee_Read(uint32_t(p)) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/DUE/eeprom_wired.cpp
+3 -4
View File
@@ -42,14 +42,13 @@ bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
delay(2);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/DUE/inc/SanityCheck.h
+1 -1
View File
@@ -57,5 +57,5 @@
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on the DUE platform."
#endif
Marlin/src/HAL/DUE/usb/udi_cdc.h
+2 -2
View File
@@ -675,11 +675,11 @@ iram_size_t udi_cdc_multi_write_buf(uint8_t port, const void* buf, iram_size_t s
* - \code // Waits and gets a value on CDC line
int udi_cdc_getc(void);
// Reads a RAM buffer on CDC line
iram_size_t udi_cdc_read_buf(int* buf, iram_size_t size);
iram_size_t udi_cdc_read_buf(int *buf, iram_size_t size);
// Puts a byte on CDC line
int udi_cdc_putc(int value);
// Writes a RAM buffer on CDC line
iram_size_t udi_cdc_write_buf(const int* buf, iram_size_t size); \endcode
iram_size_t udi_cdc_write_buf(const int *buf, iram_size_t size); \endcode
*
* \section udi_cdc_use_cases Advanced use cases
* For more advanced use of the UDI CDC module, see the following use cases:
Marlin/src/HAL/DUE/usb/usb_task.c
+1 -1
View File
@@ -264,7 +264,7 @@ bool usb_task_extra_string(void) {
** Handle device requests that the ASF stack doesn't
*/
bool usb_task_other_requests(void) {
uint8_t* ptr = 0;
uint8_t *ptr = 0;
uint16_t size = 0;
if (Udd_setup_type() == USB_REQ_TYPE_VENDOR) {
Marlin/src/HAL/ESP32/FlushableHardwareSerial.cpp
+3 -4
View File
@@ -20,11 +20,10 @@
*
*/
#include "FlushableHardwareSerial.h"
#ifdef ARDUINO_ARCH_ESP32
#include "FlushableHardwareSerial.h"
Serial0Type<FlushableHardwareSerial> flushableSerial(false, 0);
Serial1Class<FlushableHardwareSerial> flushableSerial(false, 0);
#endif // ARDUINO_ARCH_ESP32
#endif
Marlin/src/HAL/ESP32/FlushableHardwareSerial.h
+3 -5
View File
@@ -21,9 +21,9 @@
*/
#pragma once
#ifdef ARDUINO_ARCH_ESP32
#include <HardwareSerial.h>
#include "../shared/Marduino.h"
#include "../../core/serial_hook.h"
class FlushableHardwareSerial : public HardwareSerial {
@@ -31,6 +31,4 @@ public:
FlushableHardwareSerial(int uart_nr) : HardwareSerial(uart_nr) {}
};
extern Serial0Type<FlushableHardwareSerial> flushableSerial;
#endif // ARDUINO_ARCH_ESP32
extern Serial1Class<FlushableHardwareSerial> flushableSerial;
Marlin/src/HAL/ESP32/HAL.cpp
+2 -1
View File
@@ -41,7 +41,7 @@
#endif
#if ENABLED(ESP3D_WIFISUPPORT)
DefaultSerial MSerial(false, Serial2Socket);
DefaultSerial1 MSerial0(false, Serial2Socket);
#endif
// ------------------------
@@ -185,6 +185,7 @@ void HAL_adc_init() {
TERN_(HAS_TEMP_ADC_7, adc3_set_attenuation(get_channel(TEMP_7_PIN), ADC_ATTEN_11db));
TERN_(HAS_HEATED_BED, adc1_set_attenuation(get_channel(TEMP_BED_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_CHAMBER, adc1_set_attenuation(get_channel(TEMP_CHAMBER_PIN), ADC_ATTEN_11db));
TERN_(HAS_TEMP_COOLER, adc1_set_attenuation(get_channel(TEMP_COOLER_PIN), ADC_ATTEN_11db));
TERN_(FILAMENT_WIDTH_SENSOR, adc1_set_attenuation(get_channel(FILWIDTH_PIN), ADC_ATTEN_11db));
// Note that adc2 is shared with the WiFi module, which has higher priority, so the conversion may fail.
Marlin/src/HAL/ESP32/HAL.h
+5 -5
View File
@@ -51,15 +51,15 @@
extern portMUX_TYPE spinlock;
#define MYSERIAL0 flushableSerial
#define MYSERIAL1 flushableSerial
#if EITHER(WIFISUPPORT, ESP3D_WIFISUPPORT)
#if ENABLED(ESP3D_WIFISUPPORT)
typedef ForwardSerial0Type< decltype(Serial2Socket) > DefaultSerial;
extern DefaultSerial MSerial;
#define MYSERIAL1 MSerial
typedef ForwardSerial1Class< decltype(Serial2Socket) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#define MYSERIAL2 MSerial0
#else
#define MYSERIAL1 webSocketSerial
#define MYSERIAL2 webSocketSerial
#endif
#endif
Marlin/src/HAL/ESP32/HAL_SPI.cpp
+2 -2
View File
@@ -85,7 +85,7 @@ uint8_t spiRec() {
return returnByte;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transferBytes(0, buf, nbyte);
SPI.endTransaction();
@@ -97,7 +97,7 @@ void spiSend(uint8_t b) {
SPI.endTransaction();
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.beginTransaction(spiConfig);
SPI.transfer(token);
SPI.writeBytes(const_cast<uint8_t*>(buf), 512);
Marlin/src/HAL/ESP32/WebSocketSerial.cpp
+1 -1
View File
@@ -137,7 +137,7 @@ size_t WebSocketSerial::write(const uint8_t c) {
return ret;
}
size_t WebSocketSerial::write(const uint8_t* buffer, size_t size) {
size_t WebSocketSerial::write(const uint8_t *buffer, size_t size) {
size_t written = 0;
for (size_t i = 0; i < size; i++)
written += write(buffer[i]);
Marlin/src/HAL/ESP32/WebSocketSerial.h
+3 -3
View File
@@ -54,7 +54,7 @@ public:
ring_buffer_pos_t read(uint8_t *buffer);
void flush();
ring_buffer_pos_t write(const uint8_t c);
ring_buffer_pos_t write(const uint8_t* buffer, ring_buffer_pos_t size);
ring_buffer_pos_t write(const uint8_t *buffer, ring_buffer_pos_t size);
};
class WebSocketSerial: public Stream {
@@ -70,7 +70,7 @@ public:
int read();
void flush();
size_t write(const uint8_t c);
size_t write(const uint8_t* buffer, size_t size);
size_t write(const uint8_t *buffer, size_t size);
#if ENABLED(SERIAL_STATS_DROPPED_RX)
FORCE_INLINE uint32_t dropped() { return 0; }
@@ -81,5 +81,5 @@ public:
#endif
};
typedef Serial0Type<WebSocketSerial> MSerialT;
typedef Serial1Class<WebSocketSerial> MSerialT;
extern MSerialT webSocketSerial;
Marlin/src/HAL/ESP32/inc/SanityCheck.h
+5 -1
View File
@@ -30,9 +30,13 @@
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on ESP32."
#endif
#if BOTH(WIFISUPPORT, ESP3D_WIFISUPPORT)
#error "Only enable one WiFi option, either WIFISUPPORT or ESP3D_WIFISUPPORT."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on ESP32."
#endif
Marlin/src/HAL/HAL.h
-6
View File
@@ -29,12 +29,6 @@
#include HAL_PATH(.,HAL.h)
#ifdef SERIAL_PORT_2
#define NUM_SERIAL 2
#else
#define NUM_SERIAL 1
#endif
#define HAL_ADC_RANGE _BV(HAL_ADC_RESOLUTION)
#ifndef I2C_ADDRESS
Marlin/src/HAL/LINUX/HAL.h
+1 -1
View File
@@ -61,7 +61,7 @@ uint8_t _getc();
#define SHARED_SERVOS HAS_SERVOS
extern MSerialT usb_serial;
#define MYSERIAL0 usb_serial
#define MYSERIAL1 usb_serial
#define ST7920_DELAY_1 DELAY_NS(600)
#define ST7920_DELAY_2 DELAY_NS(750)
Marlin/src/HAL/LINUX/inc/SanityCheck.h
+5 -1
View File
@@ -35,5 +35,9 @@
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on LINUX."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on LINUX."
#endif
Marlin/src/HAL/LINUX/include/serial.h
+1 -1
View File
@@ -115,4 +115,4 @@ struct HalSerial {
volatile bool host_connected;
};
typedef Serial0Type<HalSerial> MSerialT;
typedef Serial1Class<HalSerial> MSerialT;
Marlin/src/HAL/LINUX/main.cpp
+2 -2
View File
@@ -105,8 +105,8 @@ int main() {
std::thread write_serial (write_serial_thread);
std::thread read_serial (read_serial_thread);
#ifdef MYSERIAL0
MYSERIAL0.begin(BAUDRATE);
#ifdef MYSERIAL1
MYSERIAL1.begin(BAUDRATE);
SERIAL_ECHOLNPGM("x86_64 Initialized");
SERIAL_FLUSHTX();
#endif
Marlin/src/HAL/LPC1768/DebugMonitor.cpp
-322
View File
@@ -1,322 +0,0 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2020 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768
#include "../../core/macros.h"
#include "../../core/serial.h"
#include <stdarg.h>
#include "../shared/backtrace/unwinder.h"
#include "../shared/backtrace/unwmemaccess.h"
#include "watchdog.h"
#include <debug_frmwrk.h>
// Debug monitor that dumps to the Programming port all status when
// an exception or WDT timeout happens - And then resets the board
// All the Monitor routines must run with interrupts disabled and
// under an ISR execution context. That is why we cannot reuse the
// Serial interrupt routines or any C runtime, as we don't know the
// state we are when running them
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
// (re)initialize UART0 as a monitor output to 250000,n,8,1
static void TXBegin() {
}
// Send character through UART with no interrupts
static void TX(char c) {
_DBC(c);
}
// Send String through UART
static void TX(const char* s) {
while (*s) TX(*s++);
}
static void TXDigit(uint32_t d) {
if (d < 10) TX((char)(d+'0'));
else if (d < 16) TX((char)(d+'A'-10));
else TX('?');
}
// Send Hex number thru UART
static void TXHex(uint32_t v) {
TX("0x");
for (uint8_t i = 0; i < 8; i++, v <<= 4)
TXDigit((v >> 28) & 0xF);
}
// Send Decimal number thru UART
static void TXDec(uint32_t v) {
if (!v) {
TX('0');
return;
}
char nbrs[14];
char *p = &nbrs[0];
while (v != 0) {
*p++ = '0' + (v % 10);
v /= 10;
}
do {
p--;
TX(*p);
} while (p != &nbrs[0]);
}
// Dump a backtrace entry
static bool UnwReportOut(void* ctx, const UnwReport* bte) {
int* p = (int*)ctx;
(*p)++;
TX('#'); TXDec(*p); TX(" : ");
TX(bte->name?bte->name:"unknown"); TX('@'); TXHex(bte->function);
TX('+'); TXDec(bte->address - bte->function);
TX(" PC:");TXHex(bte->address); TX('\n');
return true;
}
#ifdef UNW_DEBUG
void UnwPrintf(const char* format, ...) {
char dest[256];
va_list argptr;
va_start(argptr, format);
vsprintf(dest, format, argptr);
va_end(argptr);
TX(&dest[0]);
}
#endif
/* Table of function pointers for passing to the unwinder */
static const UnwindCallbacks UnwCallbacks = {
UnwReportOut,
UnwReadW,
UnwReadH,
UnwReadB
#ifdef UNW_DEBUG
,UnwPrintf
#endif
};
/**
* HardFaultHandler_C:
* This is called from the HardFault_HandlerAsm with a pointer the Fault stack
* as the parameter. We can then read the values from the stack and place them
* into local variables for ease of reading.
* We then read the various Fault Status and Address Registers to help decode
* cause of the fault.
* The function ends with a BKPT instruction to force control back into the debugger
*/
extern "C"
void HardFault_HandlerC(unsigned long *sp, unsigned long lr, unsigned long cause) {
static const char* causestr[] = {
"NMI","Hard","Mem","Bus","Usage","Debug","WDT","RSTC"
};
UnwindFrame btf;
// Dump report to the Programming port (interrupts are DISABLED)
TXBegin();
TX("\n\n## Software Fault detected ##\n");
TX("Cause: "); TX(causestr[cause]); TX('\n');
TX("R0 : "); TXHex(((unsigned long)sp[0])); TX('\n');
TX("R1 : "); TXHex(((unsigned long)sp[1])); TX('\n');
TX("R2 : "); TXHex(((unsigned long)sp[2])); TX('\n');
TX("R3 : "); TXHex(((unsigned long)sp[3])); TX('\n');
TX("R12 : "); TXHex(((unsigned long)sp[4])); TX('\n');
TX("LR : "); TXHex(((unsigned long)sp[5])); TX('\n');
TX("PC : "); TXHex(((unsigned long)sp[6])); TX('\n');
TX("PSR : "); TXHex(((unsigned long)sp[7])); TX('\n');
// Configurable Fault Status Register
// Consists of MMSR, BFSR and UFSR
TX("CFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED28)))); TX('\n');
// Hard Fault Status Register
TX("HFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED2C)))); TX('\n');
// Debug Fault Status Register
TX("DFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED30)))); TX('\n');
// Auxiliary Fault Status Register
TX("AFSR : "); TXHex((*((volatile unsigned long *)(0xE000ED3C)))); TX('\n');
// Read the Fault Address Registers. These may not contain valid values.
// Check BFARVALID/MMARVALID to see if they are valid values
// MemManage Fault Address Register
TX("MMAR : "); TXHex((*((volatile unsigned long *)(0xE000ED34)))); TX('\n');
// Bus Fault Address Register
TX("BFAR : "); TXHex((*((volatile unsigned long *)(0xE000ED38)))); TX('\n');
TX("ExcLR: "); TXHex(lr); TX('\n');
TX("ExcSP: "); TXHex((unsigned long)sp); TX('\n');
btf.sp = ((unsigned long)sp) + 8*4; // The original stack pointer
btf.fp = btf.sp;
btf.lr = ((unsigned long)sp[5]);
btf.pc = ((unsigned long)sp[6]) | 1; // Force Thumb, as CORTEX only support it
// Perform a backtrace
TX("\nBacktrace:\n\n");
int ctr = 0;
UnwindStart(&btf, &UnwCallbacks, &ctr);
// Disable all NVIC interrupts
NVIC->ICER[0] = 0xFFFFFFFF;
NVIC->ICER[1] = 0xFFFFFFFF;
// Relocate VTOR table to default position
SCB->VTOR = 0;
// Clear cause of reset to prevent entering smoothie bootstrap
HAL_clear_reset_source();
// Restart watchdog
#if ENABLED(USE_WATCHDOG)
//WDT_Restart(WDT);
watchdog_init();
#endif
// Reset controller
NVIC_SystemReset();
// Nothing below here is compiled because NVIC_SystemReset loops forever
for (;;) { TERN_(USE_WATCHDOG, watchdog_init()); }
}
extern "C" {
__attribute__((naked)) void NMI_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#0")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void HardFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#1")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void MemManage_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#2")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void BusFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#3")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void UsageFault_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#4")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void DebugMon_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#5")
A("b HardFault_HandlerC")
);
}
/* This is NOT an exception, it is an interrupt handler - Nevertheless, the framing is the same */
__attribute__((naked)) void WDT_IRQHandler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#6")
A("b HardFault_HandlerC")
);
}
__attribute__((naked)) void RSTC_Handler() {
__asm__ __volatile__ (
".syntax unified" "\n\t"
A("tst lr, #4")
A("ite eq")
A("mrseq r0, msp")
A("mrsne r0, psp")
A("mov r1,lr")
A("mov r2,#7")
A("b HardFault_HandlerC")
);
}
}
#endif // TARGET_LPC1768
Marlin/src/HAL/LPC1768/HAL.cpp
+1 -1
View File
@@ -29,7 +29,7 @@
#include "watchdog.h"
#endif
DefaultSerial USBSerial(false, UsbSerial);
DefaultSerial1 USBSerial(false, UsbSerial);
uint32_t HAL_adc_reading = 0;
Marlin/src/HAL/LPC1768/HAL.h
+9 -7
View File
@@ -60,26 +60,25 @@ extern "C" volatile uint32_t _millis;
#define ST7920_DELAY_3 DELAY_NS(750)
#endif
typedef ForwardSerial0Type< decltype(UsbSerial) > DefaultSerial;
extern DefaultSerial USBSerial;
typedef ForwardSerial1Class< decltype(UsbSerial) > DefaultSerial1;
extern DefaultSerial1 USBSerial;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
#if SERIAL_PORT == -1
#define MYSERIAL0 USBSerial
#define MYSERIAL1 USBSerial
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 USBSerial
#define MYSERIAL2 USBSerial
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
@@ -103,6 +102,9 @@ extern DefaultSerial USBSerial;
#else
#error "LCD_SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#if HAS_DGUS_LCD
#define SERIAL_GET_TX_BUFFER_FREE() MSerial0.available()
#endif
#endif
//
Marlin/src/HAL/LPC1768/HAL_MinSerial.cpp
+50
View File
@@ -0,0 +1,50 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef TARGET_LPC1768
#include "HAL.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include <debug_frmwrk.h>
static void TX(char c) { _DBC(c); }
void install_min_serial() { HAL_min_serial_out = &TX; }
#if DISABLED(DYNAMIC_VECTORTABLE)
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"))) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"))) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // TARGET_LPC1768
Marlin/src/HAL/LPC1768/HAL_SPI.cpp
+5 -5
View File
@@ -93,12 +93,12 @@
void spiSend(uint8_t b) { (void)spiTransfer(b); }
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++)
(void)spiTransfer(buf[i]);
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
(void)spiTransfer(token);
for (uint16_t i = 0; i < 512; i++)
(void)spiTransfer(buf[i]);
@@ -135,13 +135,13 @@
void spiSend(uint8_t b) { doio(b); }
void spiSend(const uint8_t* buf, size_t nbyte) {
void spiSend(const uint8_t *buf, size_t nbyte) {
for (uint16_t i = 0; i < nbyte; i++) doio(buf[i]);
}
void spiSend(uint32_t chan, byte b) {}
void spiSend(uint32_t chan, const uint8_t* buf, size_t nbyte) {}
void spiSend(uint32_t chan, const uint8_t *buf, size_t nbyte) {}
// Read single byte from SPI
uint8_t spiRec() { return doio(0xFF); }
@@ -156,7 +156,7 @@
uint8_t spiTransfer(uint8_t b) { return doio(b); }
// Write from buffer to SPI
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
(void)spiTransfer(token);
for (uint16_t i = 0; i < 512; i++)
(void)spiTransfer(buf[i]);
Marlin/src/HAL/LPC1768/MarlinSerial.cpp
+40 -13
View File
@@ -21,24 +21,51 @@
*/
#ifdef TARGET_LPC1768
#include "../../inc/MarlinConfigPre.h"
#include "MarlinSerial.h"
#if ANY_SERIAL_IS(0)
MSerialT MSerial(true, LPC_UART0);
extern "C" void UART0_IRQHandler() { MSerial.IRQHandler(); }
#include "../../inc/MarlinConfig.h"
#if USING_HW_SERIAL0
MarlinSerial _MSerial(LPC_UART0);
MSerialT MSerial0(true, _MSerial);
extern "C" void UART0_IRQHandler() { _MSerial.IRQHandler(); }
#endif
#if ANY_SERIAL_IS(1)
MSerialT MSerial1(true, (LPC_UART_TypeDef *) LPC_UART1);
extern "C" void UART1_IRQHandler() { MSerial1.IRQHandler(); }
#if USING_HW_SERIAL1
MarlinSerial _MSerial1((LPC_UART_TypeDef *) LPC_UART1);
MSerialT MSerial1(true, _MSerial1);
extern "C" void UART1_IRQHandler() { _MSerial1.IRQHandler(); }
#endif
#if ANY_SERIAL_IS(2)
MSerialT MSerial2(true, LPC_UART2);
extern "C" void UART2_IRQHandler() { MSerial2.IRQHandler(); }
#if USING_HW_SERIAL2
MarlinSerial _MSerial2(LPC_UART2);
MSerialT MSerial2(true, _MSerial2);
extern "C" void UART2_IRQHandler() { _MSerial2.IRQHandler(); }
#endif
#if ANY_SERIAL_IS(3)
MSerialT MSerial3(true, LPC_UART3);
extern "C" void UART3_IRQHandler() { MSerial3.IRQHandler(); }
#if USING_HW_SERIAL3
MarlinSerial _MSerial3(LPC_UART3);
MSerialT MSerial3(true, _MSerial3);
extern "C" void UART3_IRQHandler() { _MSerial3.IRQHandler(); }
#endif
#if ENABLED(EMERGENCY_PARSER)
bool MarlinSerial::recv_callback(const char c) {
// Need to figure out which serial port we are and react in consequence (Marlin does not have CONTAINER_OF macro)
if (false) {}
#if USING_HW_SERIAL0
else if (this == &_MSerial) emergency_parser.update(MSerial0.emergency_state, c);
#endif
#if USING_HW_SERIAL1
else if (this == &_MSerial1) emergency_parser.update(MSerial1.emergency_state, c);
#endif
#if USING_HW_SERIAL2
else if (this == &_MSerial2) emergency_parser.update(MSerial2.emergency_state, c);
#endif
#if USING_HW_SERIAL3
else if (this == &_MSerial3) emergency_parser.update(MSerial3.emergency_state, c);
#endif
return true;
}
#endif
#endif // TARGET_LPC1768
Marlin/src/HAL/LPC1768/MarlinSerial.h
+12 -6
View File
@@ -47,15 +47,21 @@ public:
void end() {}
#if ENABLED(EMERGENCY_PARSER)
bool recv_callback(const char c) override {
emergency_parser.update(static_cast<Serial0Type<MarlinSerial> *>(this)->emergency_state, c);
return true; // do not discard character
}
bool recv_callback(const char c) override;
#endif
};
typedef Serial0Type<MarlinSerial> MSerialT;
extern MSerialT MSerial;
// On LPC176x framework, HardwareSerial does not implement the same interface as Arduino's Serial, so overloads
// of 'available' and 'read' method are not used in this multiple inheritance scenario.
// Instead, use a ForwardSerial here that adapts the interface.
typedef ForwardSerial1Class<MarlinSerial> MSerialT;
extern MSerialT MSerial0;
extern MSerialT MSerial1;
extern MSerialT MSerial2;
extern MSerialT MSerial3;
// Consequently, we can't use a RuntimeSerial either. The workaround would be to use a RuntimeSerial<ForwardSerial<MarlinSerial>> type here
// Right now, let's ignore this until it's actually required.
#if ENABLED(SERIAL_RUNTIME_HOOK)
#error "SERIAL_RUNTIME_HOOK is not yet supported for LPC176x."
#endif
Marlin/src/HAL/LPC1768/eeprom_sdcard.cpp
+3 -4
View File
@@ -83,14 +83,13 @@ bool PersistentStore::access_finish() {
static void debug_rw(const bool write, int &pos, const uint8_t *value, const size_t size, const FRESULT s, const size_t total=0) {
PGM_P const rw_str = write ? PSTR("write") : PSTR("read");
SERIAL_CHAR(' ');
serialprintPGM(rw_str);
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOLNPAIR("_data(", pos, ",", value, ",", size, ", ...)");
if (total) {
SERIAL_ECHOPGM(" f_");
serialprintPGM(rw_str);
SERIAL_ECHOPGM_P(rw_str);
SERIAL_ECHOPAIR("()=", s, "\n size=", size, "\n bytes_");
serialprintPGM(write ? PSTR("written=") : PSTR("read="));
SERIAL_ECHOLN(total);
SERIAL_ECHOLNPAIR_P(write ? PSTR("written=") : PSTR("read="), total);
}
else
SERIAL_ECHOLNPAIR(" f_lseek()=", s);
Marlin/src/HAL/LPC1768/eeprom_wired.cpp
+4 -8
View File
@@ -42,25 +42,22 @@ bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
uint8_t * const p = (uint8_t * const)pos;
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
};
}
return false;
}
@@ -68,7 +65,6 @@ bool PersistentStore::read_data(int &pos, uint8_t *value, size_t size, uint16_t
do {
// Read from external EEPROM
const uint8_t c = eeprom_read_byte((uint8_t*)pos);
if (writing) *value = c;
crc16(crc, &c, 1);
pos++;
Marlin/src/HAL/LPC1768/inc/Conditionals_post.h
-1
View File
@@ -30,6 +30,5 @@
// LPC1768 boards seem to lose steps when saving to EEPROM during print (issue #20785)
// TODO: Which other boards are incompatible?
#if defined(MCU_LPC1768) && PRINTCOUNTER_SAVE_INTERVAL > 0
#warning "To prevent step loss, motion will pause for PRINTCOUNTER auto-save."
#define PRINTCOUNTER_SYNC 1
#endif
Marlin/src/HAL/LPC1768/inc/SanityCheck.h
+6 -6
View File
@@ -92,7 +92,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#define ANY_TX(N,V...) DO(IS_TX##N,||,V)
#define ANY_RX(N,V...) DO(IS_RX##N,||,V)
#if ANY_SERIAL_IS(0)
#if USING_HW_SERIAL0
#define IS_TX0(P) (P == P0_02)
#define IS_RX0(P) (P == P0_03)
#if IS_TX0(TMC_SW_MISO) || IS_RX0(TMC_SW_MOSI)
@@ -106,7 +106,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#undef IS_RX0
#endif
#if ANY_SERIAL_IS(1)
#if USING_HW_SERIAL1
#define IS_TX1(P) (P == P0_15)
#define IS_RX1(P) (P == P0_16)
#define _IS_TX1_1 IS_TX1
@@ -127,7 +127,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#undef _IS_RX1_1
#endif
#if ANY_SERIAL_IS(2)
#if USING_HW_SERIAL2
#define IS_TX2(P) (P == P0_10)
#define IS_RX2(P) (P == P0_11)
#define _IS_TX2_1 IS_TX2
@@ -161,7 +161,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#undef _IS_RX2_1
#endif
#if ANY_SERIAL_IS(3)
#if USING_HW_SERIAL3
#define PIN_IS_TX3(P) (PIN_EXISTS(P) && P##_PIN == P0_00)
#define PIN_IS_RX3(P) (P##_PIN == P0_01)
#if PIN_IS_TX3(X_MIN) || PIN_IS_RX3(X_MAX)
@@ -270,7 +270,7 @@ static_assert(DISABLED(BAUD_RATE_GCODE), "BAUD_RATE_GCODE is not yet supported o
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform."
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on LPC176x."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#error "SERIAL_STATS_DROPPED_RX is not supported on LPX176x."
#endif
Marlin/src/HAL/LPC1768/main.cpp
+5 -3
View File
@@ -46,6 +46,8 @@ extern "C" {
void SysTick_Callback() { disk_timerproc(); }
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() {
// Init LEDs
@@ -123,9 +125,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice
USB_Connect(true);
#if HAS_SD_HOST_DRIVE
MSC_SD_Init(0); // Enable USB SD card access
#endif
TERN_(HAS_SD_HOST_DRIVE, MSC_SD_Init(0)); // Enable USB SD card access
const millis_t usb_timeout = millis() + 2000;
while (!USB_Configuration && PENDING(millis(), usb_timeout)) {
@@ -137,6 +137,8 @@ void HAL_init() {
}
HAL_timer_init();
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
}
// HAL idle task
Marlin/src/HAL/LPC1768/u8g/u8g_com_HAL_LPC1768_st7920_hw_spi.cpp
+1 -1
View File
@@ -66,7 +66,7 @@
void spiBegin();
void spiInit(uint8_t spiRate);
void spiSend(uint8_t b);
void spiSend(const uint8_t* buf, size_t n);
void spiSend(const uint8_t *buf, size_t n);
static uint8_t rs_last_state = 255;
Marlin/src/HAL/LPC1768/upload_extra_script.py
+2 -5
View File
@@ -8,9 +8,7 @@ from __future__ import print_function
target_filename = "FIRMWARE.CUR"
target_drive = "REARM"
import os
import getpass
import platform
import os,getpass,platform
current_OS = platform.system()
Import("env")
@@ -33,9 +31,8 @@ try:
#
# platformio.ini will accept this for a Windows upload port designation: 'upload_port = L:'
# Windows - doesn't care about the disk's name, only cares about the drive letter
import subprocess
import subprocess,string
from ctypes import windll
import string
# getting list of drives
# https://stackoverflow.com/questions/827371/is-there-a-way-to-list-all-the-available-drive-letters-in-python
Marlin/src/HAL/LPC1768/usb_serial.cpp
+2 -2
View File
@@ -29,8 +29,8 @@
EmergencyParser::State emergency_state;
bool CDC_RecvCallback(const char buffer) {
emergency_parser.update(emergency_state, buffer);
bool CDC_RecvCallback(const char c) {
emergency_parser.update(emergency_state, c);
return true;
}
Marlin/src/HAL/SAMD51/HAL.cpp
+24 -10
View File
@@ -25,20 +25,20 @@
#include <wiring_private.h>
#ifdef ADAFRUIT_GRAND_CENTRAL_M4
#if ANY_SERIAL_IS(-1)
DefaultSerial MSerial(false, Serial);
#if USING_HW_SERIALUSB
DefaultSerial1 MSerial0(false, Serial);
#endif
#if ANY_SERIAL_IS(0)
DefaultSerial1 MSerial1(false, Serial1);
#if USING_HW_SERIAL0
DefaultSerial2 MSerial1(false, Serial1);
#endif
#if ANY_SERIAL_IS(1)
DefaultSerial2 MSerial2(false, Serial2);
#if USING_HW_SERIAL1
DefaultSerial3 MSerial2(false, Serial2);
#endif
#if ANY_SERIAL_IS(2)
DefaultSerial3 MSerial3(false, Serial3);
#if USING_HW_SERIAL2
DefaultSerial4 MSerial3(false, Serial3);
#endif
#if ANY_SERIAL_IS(3)
DefaultSerial4 MSerial4(false, Serial4);
#if USING_HW_SERIAL3
DefaultSerial5 MSerial4(false, Serial4);
#endif
#endif
@@ -57,6 +57,7 @@
#define GET_PROBE_ADC() TERN(HAS_TEMP_PROBE, PIN_TO_ADC(TEMP_PROBE_PIN), -1)
#define GET_BED_ADC() TERN(HAS_TEMP_ADC_BED, PIN_TO_ADC(TEMP_BED_PIN), -1)
#define GET_CHAMBER_ADC() TERN(HAS_TEMP_ADC_CHAMBER, PIN_TO_ADC(TEMP_CHAMBER_PIN), -1)
#define GET_COOLER_ADC() TERN(HAS_TEMP_ADC_COOLER, PIN_TO_ADC(TEMP_COOLER_PIN), -1)
#define GET_FILAMENT_WIDTH_ADC() TERN(FILAMENT_WIDTH_SENSOR, PIN_TO_ADC(FILWIDTH_PIN), -1)
#define GET_BUTTONS_ADC() TERN(HAS_ADC_BUTTONS, PIN_TO_ADC(ADC_KEYPAD_PIN), -1)
@@ -66,6 +67,7 @@
|| GET_PROBE_ADC() == n \
|| GET_BED_ADC() == n \
|| GET_CHAMBER_ADC() == n \
|| GET_COOLER_ADC() == n \
|| GET_FILAMENT_WIDTH_ADC() == n \
|| GET_BUTTONS_ADC() == n \
)
@@ -144,6 +146,9 @@ uint16_t HAL_adc_result;
#if GET_CHAMBER_ADC() == 0
TEMP_CHAMBER_PIN,
#endif
#if GET_COOLER_ADC() == 0
TEMP_COOLER_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0
FILWIDTH_PIN,
#endif
@@ -184,6 +189,9 @@ uint16_t HAL_adc_result;
#if GET_CHAMBER_ADC() == 1
TEMP_CHAMBER_PIN,
#endif
#if GET_COOLER_ADC() == 1
TEMP_COOLER_PIN,
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1
FILWIDTH_PIN,
#endif
@@ -232,6 +240,9 @@ uint16_t HAL_adc_result;
#if GET_CHAMBER_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif
#if GET_COOLER_ADC() == 0
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 0
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif
@@ -281,6 +292,9 @@ uint16_t HAL_adc_result;
#if GET_CHAMBER_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_CHAMBER_PIN) },
#endif
#if GET_COOLER_ADC() == 1
{ PIN_TO_INPUTCTRL(TEMP_COOLER_PIN) },
#endif
#if GET_FILAMENT_WIDTH_ADC() == 1
{ PIN_TO_INPUTCTRL(FILWIDTH_PIN) },
#endif
Marlin/src/HAL/SAMD51/HAL.h
+17 -17
View File
@@ -32,36 +32,36 @@
#include "MarlinSerial_AGCM4.h"
// Serial ports
typedef ForwardSerial0Type< decltype(Serial) > DefaultSerial;
typedef ForwardSerial0Type< decltype(Serial1) > DefaultSerial1;
typedef ForwardSerial0Type< decltype(Serial2) > DefaultSerial2;
typedef ForwardSerial0Type< decltype(Serial3) > DefaultSerial3;
typedef ForwardSerial0Type< decltype(Serial4) > DefaultSerial4;
extern DefaultSerial MSerial;
extern DefaultSerial1 MSerial1;
extern DefaultSerial2 MSerial2;
extern DefaultSerial3 MSerial3;
extern DefaultSerial4 MSerial4;
typedef ForwardSerial1Class< decltype(Serial) > DefaultSerial1;
typedef ForwardSerial1Class< decltype(Serial1) > DefaultSerial2;
typedef ForwardSerial1Class< decltype(Serial2) > DefaultSerial3;
typedef ForwardSerial1Class< decltype(Serial3) > DefaultSerial4;
typedef ForwardSerial1Class< decltype(Serial4) > DefaultSerial5;
extern DefaultSerial1 MSerial0;
extern DefaultSerial2 MSerial1;
extern DefaultSerial3 MSerial2;
extern DefaultSerial4 MSerial3;
extern DefaultSerial5 MSerial4;
// MYSERIAL0 required before MarlinSerial includes!
// MYSERIAL1 required before MarlinSerial includes!
#define __MSERIAL(X) MSerial##X
#define _MSERIAL(X) __MSERIAL(X)
#define MSERIAL(X) _MSERIAL(INCREMENT(X))
#if SERIAL_PORT == -1
#define MYSERIAL0 MSerial
#define MYSERIAL1 MSerial0
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be from -1 to 3. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 MSerial
#define MYSERIAL2 MSerial0
#elif WITHIN(SERIAL_PORT_2, 0, 3)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -1 to 3. Please update your configuration."
#endif
@@ -69,7 +69,7 @@
#ifdef MMU2_SERIAL_PORT
#if MMU2_SERIAL_PORT == -1
#define MMU2_SERIAL MSerial
#define MMU2_SERIAL MSerial0
#elif WITHIN(MMU2_SERIAL_PORT, 0, 3)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#else
@@ -79,7 +79,7 @@
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL MSerial
#define LCD_SERIAL MSerial0
#elif WITHIN(LCD_SERIAL_PORT, 0, 3)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
Marlin/src/HAL/SAMD51/HAL_SPI.cpp
+2 -2
View File
@@ -103,7 +103,7 @@
* @param nbyte Number of bytes to receive.
* @return Nothing
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte == 0) return;
memset(buf, 0xFF, nbyte);
sdSPI.beginTransaction(spiConfig);
@@ -132,7 +132,7 @@
*
* @details Uses DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
sdSPI.beginTransaction(spiConfig);
sdSPI.transfer(token);
sdSPI.transfer((uint8_t*)buf, nullptr, 512);
Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.cpp
+3 -3
View File
@@ -27,7 +27,7 @@
#include "../../inc/MarlinConfig.h"
#if ANY_SERIAL_IS(1)
#if USING_HW_SERIAL1
UartT Serial2(false, &sercom4, PIN_SERIAL2_RX, PIN_SERIAL2_TX, PAD_SERIAL2_RX, PAD_SERIAL2_TX);
void SERCOM4_0_Handler() { Serial2.IrqHandler(); }
void SERCOM4_1_Handler() { Serial2.IrqHandler(); }
@@ -35,7 +35,7 @@
void SERCOM4_3_Handler() { Serial2.IrqHandler(); }
#endif
#if ANY_SERIAL_IS(2)
#if USING_HW_SERIAL2
UartT Serial3(false, &sercom1, PIN_SERIAL3_RX, PIN_SERIAL3_TX, PAD_SERIAL3_RX, PAD_SERIAL3_TX);
void SERCOM1_0_Handler() { Serial3.IrqHandler(); }
void SERCOM1_1_Handler() { Serial3.IrqHandler(); }
@@ -43,7 +43,7 @@
void SERCOM1_3_Handler() { Serial3.IrqHandler(); }
#endif
#if ANY_SERIAL_IS(3)
#if USING_HW_SERIAL3
UartT Serial4(false, &sercom5, PIN_SERIAL4_RX, PIN_SERIAL4_TX, PAD_SERIAL4_RX, PAD_SERIAL4_TX);
void SERCOM5_0_Handler() { Serial4.IrqHandler(); }
void SERCOM5_1_Handler() { Serial4.IrqHandler(); }
Marlin/src/HAL/SAMD51/MarlinSerial_AGCM4.h
+1 -1
View File
@@ -22,7 +22,7 @@
#include "../../core/serial_hook.h"
typedef Serial0Type<Uart> UartT;
typedef Serial1Class<Uart> UartT;
extern UartT Serial2;
extern UartT Serial3;
Marlin/src/HAL/SAMD51/eeprom_wired.cpp
+3 -2
View File
@@ -41,12 +41,13 @@ bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
const uint8_t v = *value;
uint8_t * const p = (uint8_t * const)pos;
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
delay(2);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/SAMD51/inc/SanityCheck.h
+4
View File
@@ -50,3 +50,7 @@
#if ENABLED(FAST_PWM_FAN) || SPINDLE_LASER_FREQUENCY
#error "Features requiring Hardware PWM (FAST_PWM_FAN, SPINDLE_LASER_FREQUENCY) are not yet supported on SAMD51."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on AGCM4."
#endif
Marlin/src/HAL/STM32/HAL.cpp
+11 -1
View File
@@ -29,7 +29,7 @@
#include "../shared/Delay.h"
#ifdef USBCON
DefaultSerial MSerial(false, SerialUSB);
DefaultSerial1 MSerial0(false, SerialUSB);
#endif
#if ENABLED(SRAM_EEPROM_EMULATION)
@@ -57,10 +57,18 @@ uint16_t HAL_adc_result;
// Public functions
// ------------------------
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
// HAL initialization task
void HAL_init() {
FastIO_init();
// Ensure F_CPU is a constant expression.
// If the compiler breaks here, it means that delay code that should compute at compile time will not work.
// So better safe than sorry here.
constexpr int cpuFreq = F_CPU;
UNUSED(cpuFreq);
#if ENABLED(SDSUPPORT) && DISABLED(SDIO_SUPPORT) && (defined(SDSS) && SDSS != -1)
OUT_WRITE(SDSS, HIGH); // Try to set SDSS inactive before any other SPI users start up
#endif
@@ -83,6 +91,8 @@ void HAL_init() {
USB_Hook_init();
#endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the min serial handler
#if HAS_SD_HOST_DRIVE
MSC_SD_init(); // Enable USB SD card access
#endif
Marlin/src/HAL/STM32/HAL.h
+8 -8
View File
@@ -40,8 +40,8 @@
#ifdef USBCON
#include <USBSerial.h>
#include "../../core/serial_hook.h"
typedef ForwardSerial0Type< decltype(SerialUSB) > DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial1Class< decltype(SerialUSB) > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#endif
// ------------------------
@@ -51,18 +51,18 @@
#define MSERIAL(X) _MSERIAL(X)
#if SERIAL_PORT == -1
#define MYSERIAL0 MSerial
#define MYSERIAL1 MSerial0
#elif WITHIN(SERIAL_PORT, 1, 6)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "SERIAL_PORT must be -1 or from 1 to 6. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 MSerial
#define MYSERIAL2 MSerial0
#elif WITHIN(SERIAL_PORT_2, 1, 6)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be -1 or from 1 to 6. Please update your configuration."
#endif
@@ -70,7 +70,7 @@
#ifdef MMU2_SERIAL_PORT
#if MMU2_SERIAL_PORT == -1
#define MMU2_SERIAL MSerial
#define MMU2_SERIAL MSerial0
#elif WITHIN(MMU2_SERIAL_PORT, 1, 6)
#define MMU2_SERIAL MSERIAL(MMU2_SERIAL_PORT)
#else
@@ -80,7 +80,7 @@
#ifdef LCD_SERIAL_PORT
#if LCD_SERIAL_PORT == -1
#define LCD_SERIAL MSerial
#define LCD_SERIAL MSerial0
#elif WITHIN(LCD_SERIAL_PORT, 1, 6)
#define LCD_SERIAL MSERIAL(LCD_SERIAL_PORT)
#else
Marlin/src/HAL/STM32/HAL_MinSerial.cpp
+152
View File
@@ -0,0 +1,152 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#if defined(ARDUINO_ARCH_STM32) && !defined(STM32GENERIC)
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include "watchdog.h"
/* Instruction Synchronization Barrier */
#define isb() __asm__ __volatile__ ("isb" : : : "memory")
/* Data Synchronization Barrier */
#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
// Dumb mapping over the registers of a USART device on STM32
struct USARTMin {
volatile uint32_t SR;
volatile uint32_t DR;
volatile uint32_t BRR;
volatile uint32_t CR1;
volatile uint32_t CR2;
};
#if WITHIN(SERIAL_PORT, 1, 6)
// Depending on the CPU, the serial port is different for USART1
static const uintptr_t regsAddr[] = {
TERN(STM32F1xx, 0x40013800, 0x40011000), // USART1
0x40004400, // USART2
0x40004800, // USART3
0x40004C00, // UART4_BASE
0x40005000, // UART5_BASE
0x40011400 // USART6
};
static USARTMin * regs = (USARTMin*)regsAddr[SERIAL_PORT - 1];
#endif
static void TXBegin() {
#if !WITHIN(SERIAL_PORT, 1, 6)
#warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
#warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
#else
// This is common between STM32F1/STM32F2 and STM32F4
const int nvicUART[] = { /* NVIC_USART1 */ 37, /* NVIC_USART2 */ 38, /* NVIC_USART3 */ 39, /* NVIC_UART4 */ 52, /* NVIC_UART5 */ 53, /* NVIC_USART6 */ 71 };
int nvicIndex = nvicUART[SERIAL_PORT - 1];
struct NVICMin {
volatile uint32_t ISER[32];
volatile uint32_t ICER[32];
};
NVICMin * nvicBase = (NVICMin*)0xE000E100;
nvicBase->ICER[nvicIndex / 32] |= _BV32(nvicIndex % 32);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
dsb();
isb();
// Example for USART1 disable: (RCC->APB2ENR &= ~(RCC_APB2ENR_USART1EN))
// Too difficult to reimplement here, let's query the STM32duino macro here
#if SERIAL_PORT == 1
__HAL_RCC_USART1_CLK_DISABLE();
__HAL_RCC_USART1_CLK_ENABLE();
#elif SERIAL_PORT == 2
__HAL_RCC_USART2_CLK_DISABLE();
__HAL_RCC_USART2_CLK_ENABLE();
#elif SERIAL_PORT == 3
__HAL_RCC_USART3_CLK_DISABLE();
__HAL_RCC_USART3_CLK_ENABLE();
#elif SERIAL_PORT == 4
__HAL_RCC_UART4_CLK_DISABLE(); // BEWARE: UART4 and not USART4 here
__HAL_RCC_UART4_CLK_ENABLE();
#elif SERIAL_PORT == 5
__HAL_RCC_UART5_CLK_DISABLE(); // BEWARE: UART5 and not USART5 here
__HAL_RCC_UART5_CLK_ENABLE();
#elif SERIAL_PORT == 6
__HAL_RCC_USART6_CLK_DISABLE();
__HAL_RCC_USART6_CLK_ENABLE();
#endif
uint32_t brr = regs->BRR;
regs->CR1 = 0; // Reset the USART
regs->CR2 = 0; // 1 stop bit
// If we don't touch the BRR (baudrate register), we don't need to recompute.
regs->BRR = brr;
regs->CR1 = _BV(3) | _BV(13); // 8 bits, no parity, 1 stop bit (TE | UE)
#endif
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
constexpr uint32_t usart_sr_txe = _BV(7);
while (!(regs->SR & usart_sr_txe)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
sw_barrier();
}
regs->DR = c;
#else
// Let's hope a mystical guru will fix this, one day by writting interrupt-free USB CDC ACM code (or, at least, by polling the registers since interrupt will be queued but will never trigger)
// For now, it's completely lost to oblivion.
#endif
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE) && DISABLED(STM32F0xx) // Cortex M0 can't jump to a symbol that's too far from the current function, so we work around this in exception_arm.cpp
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) HardFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) BusFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) UsageFault_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) MemManage_Handler();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) NMI_Handler();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // ARDUINO_ARCH_STM32
Marlin/src/HAL/STM32/HAL_SPI.cpp
+2 -2
View File
@@ -193,7 +193,7 @@ static SPISettings spiConfig;
*
* @details Uses DMA
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
if (nbyte == 0) return;
memset(buf, 0xFF, nbyte);
SPI.transfer(buf, nbyte);
@@ -218,7 +218,7 @@ static SPISettings spiConfig;
*
* @details Use DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
uint8_t rxBuf[512];
SPI.transfer(token);
SPI.transfer((uint8_t*)buf, &rxBuf, 512);
Marlin/src/HAL/STM32/MarlinSerial.cpp
+29 -14
View File
@@ -28,7 +28,6 @@
#ifndef USART4
#define USART4 UART4
#endif
#ifndef USART5
#define USART5 UART5
#endif
@@ -38,22 +37,38 @@
MSerialT MSerial ## ser_num (true, USART ## ser_num, &_rx_complete_irq_ ## ser_num); \
void _rx_complete_irq_ ## ser_num (serial_t * obj) { MSerial ## ser_num ._rx_complete_irq(obj); }
#define DECLARE_SERIAL_PORT_EXP(ser_num) DECLARE_SERIAL_PORT(ser_num)
#if defined(SERIAL_PORT) && SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(SERIAL_PORT)
#if USING_HW_SERIAL1
DECLARE_SERIAL_PORT(1)
#endif
#if defined(SERIAL_PORT_2) && SERIAL_PORT_2 >= 0
DECLARE_SERIAL_PORT_EXP(SERIAL_PORT_2)
#if USING_HW_SERIAL2
DECLARE_SERIAL_PORT(2)
#endif
#if defined(MMU2_SERIAL_PORT) && MMU2_SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(MMU2_SERIAL_PORT)
#if USING_HW_SERIAL3
DECLARE_SERIAL_PORT(3)
#endif
#if defined(LCD_SERIAL_PORT) && LCD_SERIAL_PORT >= 0
DECLARE_SERIAL_PORT_EXP(LCD_SERIAL_PORT)
#if USING_HW_SERIAL4
DECLARE_SERIAL_PORT(4)
#endif
#if USING_HW_SERIAL5
DECLARE_SERIAL_PORT(5)
#endif
#if USING_HW_SERIAL6
DECLARE_SERIAL_PORT(6)
#endif
#if USING_HW_SERIAL7
DECLARE_SERIAL_PORT(7)
#endif
#if USING_HW_SERIAL8
DECLARE_SERIAL_PORT(8)
#endif
#if USING_HW_SERIAL9
DECLARE_SERIAL_PORT(9)
#endif
#if USING_HW_SERIAL10
DECLARE_SERIAL_PORT(10)
#endif
#if USING_HW_SERIALLP1
DECLARE_SERIAL_PORT(LP1)
#endif
void MarlinSerial::begin(unsigned long baud, uint8_t config) {
Marlin/src/HAL/STM32/MarlinSerial.h
+2 -2
View File
@@ -36,13 +36,13 @@ struct MarlinSerial : public HardwareSerial {
void begin(unsigned long baud, uint8_t config);
inline void begin(unsigned long baud) { begin(baud, SERIAL_8N1); }
void _rx_complete_irq(serial_t* obj);
void _rx_complete_irq(serial_t *obj);
protected:
usart_rx_callback_t _rx_callback;
};
typedef Serial0Type<MarlinSerial> MSerialT;
typedef Serial1Class<MarlinSerial> MSerialT;
extern MSerialT MSerial1;
extern MSerialT MSerial2;
extern MSerialT MSerial3;
Marlin/src/HAL/STM32/Sd2Card_sdio_stm32duino.cpp
+119 -100
View File
@@ -36,9 +36,10 @@
// use USB drivers
extern "C" { int8_t SD_MSC_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
int8_t SD_MSC_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
extern SD_HandleTypeDef hsd;
extern "C" {
int8_t SD_MSC_Read(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
int8_t SD_MSC_Write(uint8_t lun, uint8_t *buf, uint32_t blk_addr, uint16_t blk_len);
extern SD_HandleTypeDef hsd;
}
bool SDIO_Init() {
@@ -75,7 +76,18 @@
#error "ERROR - Only STM32F103xE, STM32F103xG, STM32F4xx or STM32F7xx CPUs supported"
#endif
// Fixed
#define SDIO_D0_PIN PC8
#define SDIO_D1_PIN PC9
#define SDIO_D2_PIN PC10
#define SDIO_D3_PIN PC11
#define SDIO_CK_PIN PC12
#define SDIO_CMD_PIN PD2
SD_HandleTypeDef hsd; // create SDIO structure
// F4 support one dma for RX and another for TX.
// But Marlin will never do read and write at same time, so we use always one dma for both.
DMA_HandleTypeDef hdma_sdio;
/*
SDIO_INIT_CLK_DIV is 118
@@ -96,12 +108,12 @@
// Target Clock, configurable. Default is 18MHz, from STM32F1
#ifndef SDIO_CLOCK
#define SDIO_CLOCK 18000000 /* 18 MHz */
#define SDIO_CLOCK 18000000 // 18 MHz
#endif
// SDIO retries, configurable. Default is 3, from STM32F1
#ifndef SDIO_READ_RETRIES
#define SDIO_READ_RETRIES 3
#define SDIO_READ_RETRIES 3
#endif
// SDIO Max Clock (naming from STM Manual, don't change)
@@ -120,24 +132,21 @@
}
void go_to_transfer_speed() {
SD_InitTypeDef Init;
/* Default SDIO peripheral configuration for SD card initialization */
Init.ClockEdge = hsd.Init.ClockEdge;
Init.ClockBypass = hsd.Init.ClockBypass;
Init.ClockPowerSave = hsd.Init.ClockPowerSave;
Init.BusWide = hsd.Init.BusWide;
Init.HardwareFlowControl = hsd.Init.HardwareFlowControl;
Init.ClockDiv = clock_to_divider(SDIO_CLOCK);
hsd.Init.ClockEdge = hsd.Init.ClockEdge;
hsd.Init.ClockBypass = hsd.Init.ClockBypass;
hsd.Init.ClockPowerSave = hsd.Init.ClockPowerSave;
hsd.Init.BusWide = hsd.Init.BusWide;
hsd.Init.HardwareFlowControl = hsd.Init.HardwareFlowControl;
hsd.Init.ClockDiv = clock_to_divider(SDIO_CLOCK);
/* Initialize SDIO peripheral interface with default configuration */
SDIO_Init(hsd.Instance, Init);
SDIO_Init(hsd.Instance, hsd.Init);
}
void SD_LowLevel_Init(void) {
uint32_t tempreg;
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_GPIOC_CLK_ENABLE(); //enable GPIO clocks
__HAL_RCC_GPIOD_CLK_ENABLE(); //enable GPIO clocks
@@ -163,11 +172,45 @@
GPIO_InitStruct.Pin = GPIO_PIN_2;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
#if DISABLED(STM32F1xx)
// TODO: use __HAL_RCC_SDIO_RELEASE_RESET() and __HAL_RCC_SDIO_CLK_ENABLE();
RCC->APB2RSTR &= ~RCC_APB2RSTR_SDIORST_Msk; // take SDIO out of reset
RCC->APB2ENR |= RCC_APB2RSTR_SDIORST_Msk; // enable SDIO clock
// Enable the DMA2 Clock
// Setup DMA
#if defined(STM32F1xx)
hdma_sdio.Init.Mode = DMA_NORMAL;
hdma_sdio.Instance = DMA2_Channel4;
HAL_NVIC_EnableIRQ(DMA2_Channel4_5_IRQn);
#elif defined(STM32F4xx)
hdma_sdio.Init.Mode = DMA_PFCTRL;
hdma_sdio.Instance = DMA2_Stream3;
hdma_sdio.Init.Channel = DMA_CHANNEL_4;
hdma_sdio.Init.FIFOMode = DMA_FIFOMODE_ENABLE;
hdma_sdio.Init.FIFOThreshold = DMA_FIFO_THRESHOLD_FULL;
hdma_sdio.Init.MemBurst = DMA_MBURST_INC4;
hdma_sdio.Init.PeriphBurst = DMA_PBURST_INC4;
HAL_NVIC_EnableIRQ(DMA2_Stream3_IRQn);
#endif
HAL_NVIC_EnableIRQ(SDIO_IRQn);
hdma_sdio.Init.PeriphInc = DMA_PINC_DISABLE;
hdma_sdio.Init.MemInc = DMA_MINC_ENABLE;
hdma_sdio.Init.PeriphDataAlignment = DMA_PDATAALIGN_WORD;
hdma_sdio.Init.MemDataAlignment = DMA_MDATAALIGN_WORD;
hdma_sdio.Init.Priority = DMA_PRIORITY_LOW;
__HAL_LINKDMA(&hsd, hdmarx, hdma_sdio);
__HAL_LINKDMA(&hsd, hdmatx, hdma_sdio);
#if defined(STM32F1xx)
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_DMA2_CLK_ENABLE();
#else
__HAL_RCC_SDIO_FORCE_RESET();
delay(2);
__HAL_RCC_SDIO_RELEASE_RESET();
delay(2);
__HAL_RCC_SDIO_CLK_ENABLE();
__HAL_RCC_DMA2_FORCE_RESET();
delay(2);
__HAL_RCC_DMA2_RELEASE_RESET();
delay(2);
__HAL_RCC_DMA2_CLK_ENABLE();
#endif
//Initialize the SDIO (with initial <400Khz Clock)
@@ -179,6 +222,7 @@
// Power up the SDIO
SDIO_PowerState_ON(SDIO);
hsd.Instance = SDIO;
}
void HAL_SD_MspInit(SD_HandleTypeDef *hsd) { // application specific init
@@ -222,107 +266,82 @@
if (!status) break;
if (!--retry_Cnt) return false; // return failing status if retries are exhausted
}
go_to_transfer_speed();
}
#endif
return true;
}
/*
void init_SDIO_pins(void) {
GPIO_InitTypeDef GPIO_InitStruct = {0};
// SDIO GPIO Configuration
// PC8 ------> SDIO_D0
// PC12 ------> SDIO_CK
// PD2 ------> SDIO_CMD
static bool SDIO_ReadWriteBlock_DMA(uint32_t block, const uint8_t *src, uint8_t *dst) {
if(HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER) return false;
GPIO_InitStruct.Pin = GPIO_PIN_8;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
GPIO_InitStruct.Pin = GPIO_PIN_12;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
HAL_GPIO_Init(GPIOC, &GPIO_InitStruct);
GPIO_InitStruct.Pin = GPIO_PIN_2;
GPIO_InitStruct.Mode = GPIO_MODE_AF_PP;
GPIO_InitStruct.Pull = GPIO_NOPULL;
GPIO_InitStruct.Speed = GPIO_SPEED_FREQ_VERY_HIGH;
GPIO_InitStruct.Alternate = GPIO_AF12_SDIO;
HAL_GPIO_Init(GPIOD, &GPIO_InitStruct);
}
*/
//bool SDIO_init() { return (bool) (SD_SDIO_Init() ? 1 : 0);}
//bool SDIO_Init_C() { return (bool) (SD_SDIO_Init() ? 1 : 0);}
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
hsd.Instance = SDIO;
uint8_t retryCnt = SDIO_READ_RETRIES;
bool status;
for (;;) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
status = (bool) HAL_SD_ReadBlocks(&hsd, (uint8_t*)dst, block, 1, 1000); // read one 512 byte block with 500mS timeout
status |= (bool) HAL_SD_GetCardState(&hsd); // make sure all is OK
if (!status) break; // return passing status
if (!--retryCnt) break; // return failing status if retries are exhausted
HAL_StatusTypeDef ret;
if (src) {
hdma_sdio.Init.Direction = DMA_MEMORY_TO_PERIPH;
HAL_DMA_Init(&hdma_sdio);
ret = HAL_SD_WriteBlocks_DMA(&hsd, (uint8_t *)src, block, 1);
}
else {
hdma_sdio.Init.Direction = DMA_PERIPH_TO_MEMORY;
HAL_DMA_Init(&hdma_sdio);
ret = HAL_SD_ReadBlocks_DMA(&hsd, (uint8_t *)dst, block, 1);
}
return status;
/*
return (bool) ((status_read | status_card) ? 1 : 0);
if (SDIO_GetCardState() != SDIO_CARD_TRANSFER) return false;
if (blockAddress >= SdCard.LogBlockNbr) return false;
if ((0x03 & (uint32_t)data)) return false; // misaligned data
if (SdCard.CardType != CARD_SDHC_SDXC) { blockAddress *= 512U; }
if (!SDIO_CmdReadSingleBlock(blockAddress)) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS);
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
if (ret != HAL_OK) {
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
return false;
}
while (!SDIO_GET_FLAG(SDIO_STA_DATAEND | SDIO_STA_TRX_ERROR_FLAGS)) {}
dma_disable(SDIO_DMA_DEV, SDIO_DMA_CHANNEL);
if (SDIO->STA & SDIO_STA_RXDAVL) {
while (SDIO->STA & SDIO_STA_RXDAVL) (void)SDIO->FIFO;
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
return false;
uint32_t timeout = millis() + 500;
// Wait the transfer
while (hsd.State != HAL_SD_STATE_READY) {
if (millis() > timeout) {
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
return false;
}
}
if (SDIO_GET_FLAG(SDIO_STA_TRX_ERROR_FLAGS)) {
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
return false;
}
SDIO_CLEAR_FLAG(SDIO_ICR_CMD_FLAGS | SDIO_ICR_DATA_FLAGS);
*/
while (__HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TC_FLAG_INDEX(&hdma_sdio)) != 0
|| __HAL_DMA_GET_FLAG(&hdma_sdio, __HAL_DMA_GET_TE_FLAG_INDEX(&hdma_sdio)) != 0) { /* nada */ }
HAL_DMA_Abort_IT(&hdma_sdio);
HAL_DMA_DeInit(&hdma_sdio);
timeout = millis() + 500;
while (HAL_SD_GetCardState(&hsd) != HAL_SD_CARD_TRANSFER)
if (millis() > timeout) return false;
return true;
}
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
hsd.Instance = SDIO;
uint8_t retryCnt = SDIO_READ_RETRIES;
bool status;
for (;;) {
status = (bool) HAL_SD_WriteBlocks(&hsd, (uint8_t*)src, block, 1, 500); // write one 512 byte block with 500mS timeout
status |= (bool) HAL_SD_GetCardState(&hsd); // make sure all is OK
if (!status) break; // return passing status
if (!--retryCnt) break; // return failing status if retries are exhausted
}
return status;
bool SDIO_ReadBlock(uint32_t block, uint8_t *dst) {
uint8_t retries = SDIO_READ_RETRIES;
while (retries--) if (SDIO_ReadWriteBlock_DMA(block, NULL, dst)) return true;
return false;
}
bool SDIO_WriteBlock(uint32_t block, const uint8_t *src) {
uint8_t retries = SDIO_READ_RETRIES;
while (retries--) if (SDIO_ReadWriteBlock_DMA(block, src, NULL)) return true;
return false;
}
#if defined(STM32F1xx)
#define DMA_IRQ_HANDLER DMA2_Channel4_5_IRQHandler
#elif defined(STM32F4xx)
#define DMA_IRQ_HANDLER DMA2_Stream3_IRQHandler
#else
#error "Unknown STM32 architecture."
#endif
extern "C" void SDIO_IRQHandler(void) { HAL_SD_IRQHandler(&hsd); }
extern "C" void DMA_IRQ_HANDLER(void) { HAL_DMA_IRQHandler(&hdma_sdio); }
#endif // !USBD_USE_CDC_COMPOSITE
#endif // SDIO_SUPPORT
#endif // ARDUINO_ARCH_STM32 && !STM32GENERIC
Marlin/src/HAL/STM32/eeprom_flash.cpp
+1 -1
View File
@@ -48,7 +48,7 @@
#include "stm32_def.h"
#define DEBUG_OUT ENABLED(EEPROM_CHITCHAT)
#include "src/core/debug_out.h"
#include "../../core/debug_out.h"
#ifndef MARLIN_EEPROM_SIZE
#define MARLIN_EEPROM_SIZE 0x1000 // 4KB
Marlin/src/HAL/STM32/eeprom_wired.cpp
+4 -7
View File
@@ -43,25 +43,22 @@ bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
uint8_t * const p = (uint8_t * const)pos;
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
}
}
crc16(crc, &v, 1);
pos++;
value++;
};
}
return false;
}
Marlin/src/HAL/STM32/inc/Conditionals_adv.h
+6
View File
@@ -24,3 +24,9 @@
#if defined(USBD_USE_CDC_MSC) && DISABLED(NO_SD_HOST_DRIVE)
#define HAS_SD_HOST_DRIVE 1
#endif
// Fix F_CPU not being a compile-time constant in STSTM32 framework
#ifdef BOARD_F_CPU
#undef F_CPU
#define F_CPU BOARD_F_CPU
#endif
Marlin/src/HAL/STM32/inc/SanityCheck.h
+2 -2
View File
@@ -47,9 +47,9 @@
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform."
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on STM32."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#error "SERIAL_STATS_DROPPED_RX is not supported on STM32."
#endif
#if ANY(TFT_COLOR_UI, TFT_LVGL_UI, TFT_CLASSIC_UI) && NOT_TARGET(STM32F4xx, STM32F1xx)
Marlin/src/HAL/STM32/tft/tft_spi.cpp
+3 -3
View File
@@ -207,12 +207,12 @@ void TFT_SPI::Transmit(uint16_t Data) {
while ((SPIx.Instance->SR & SPI_FLAG_BSY) == SPI_FLAG_BSY) {}
if (TFT_MISO_PIN != TFT_MOSI_PIN)
__HAL_SPI_CLEAR_OVRFLAG(&SPIx); /* Clear overrun flag in 2 Lines communication mode because received is not read */
__HAL_SPI_CLEAR_OVRFLAG(&SPIx); // Clear overrun flag in 2 Lines communication mode because received is not read
}
void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Count) {
// Wait last dma finish, to start another
while(isBusy()) { }
while (isBusy()) { /* nada */ }
DMAtx.Init.MemInc = MemoryIncrease;
HAL_DMA_Init(&DMAtx);
@@ -225,7 +225,7 @@ void TFT_SPI::TransmitDMA(uint32_t MemoryIncrease, uint16_t *Data, uint16_t Coun
HAL_DMA_Start(&DMAtx, (uint32_t)Data, (uint32_t)&(SPIx.Instance->DR), Count);
__HAL_SPI_ENABLE(&SPIx);
SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); /* Enable Tx DMA Request */
SET_BIT(SPIx.Instance->CR2, SPI_CR2_TXDMAEN); // Enable Tx DMA Request
HAL_DMA_PollForTransfer(&DMAtx, HAL_DMA_FULL_TRANSFER, HAL_MAX_DELAY);
Abort();
Marlin/src/HAL/STM32F1/HAL.cpp
+14 -2
View File
@@ -84,7 +84,7 @@
#if defined(SERIAL_USB) && !HAS_SD_HOST_DRIVE
USBSerial SerialUSB;
DefaultSerial MSerial(true, SerialUSB);
DefaultSerial1 MSerial0(true, SerialUSB);
#if ENABLED(EMERGENCY_PARSER)
#include "../libmaple/usb/stm32f1/usb_reg_map.h"
@@ -107,7 +107,7 @@
len = usb_cdcacm_peek(buf, total);
for (uint32 i = 0; i < len; i++)
emergency_parser.update(MSerial.emergency_state, buf[i + total - len]);
emergency_parser.update(MSerial0.emergency_state, buf[i + total - len]);
}
#endif
#endif
@@ -132,6 +132,9 @@ const uint8_t adc_pins[] = {
#if HAS_TEMP_CHAMBER
TEMP_CHAMBER_PIN,
#endif
#if HAS_TEMP_COOLER
TEMP_COOLER_PIN,
#endif
#if HAS_TEMP_ADC_1
TEMP_1_PIN,
#endif
@@ -189,6 +192,9 @@ enum TempPinIndex : char {
#if HAS_TEMP_CHAMBER
TEMP_CHAMBER,
#endif
#if HAS_TEMP_COOLER
TEMP_COOLER_PIN,
#endif
#if HAS_TEMP_ADC_1
TEMP_1,
#endif
@@ -272,6 +278,8 @@ static void NVIC_SetPriorityGrouping(uint32_t PriorityGroup) {
} }
#endif
TERN_(POSTMORTEM_DEBUGGING, extern void install_min_serial());
void HAL_init() {
NVIC_SetPriorityGrouping(0x3);
#if PIN_EXISTS(LED)
@@ -287,6 +295,7 @@ void HAL_init() {
delay(1000); // Give OS time to notice
OUT_WRITE(USB_CONNECT_PIN, USB_CONNECT_INVERTING);
#endif
TERN_(POSTMORTEM_DEBUGGING, install_min_serial()); // Install the minimal serial handler
}
// HAL idle task
@@ -382,6 +391,9 @@ void HAL_adc_start_conversion(const uint8_t adc_pin) {
#if HAS_TEMP_CHAMBER
case TEMP_CHAMBER_PIN: pin_index = TEMP_CHAMBER; break;
#endif
#if HAS_TEMP_COOLER
case TEMP_COOLER_PIN: pin_index = TEMP_COOLER; break;
#endif
#if HAS_TEMP_ADC_1
case TEMP_1_PIN: pin_index = TEMP_1; break;
#endif
Marlin/src/HAL/STM32F1/HAL.h
+7 -7
View File
@@ -61,11 +61,11 @@
#endif
#ifdef SERIAL_USB
typedef ForwardSerial0Type< USBSerial > DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial1Class< USBSerial > DefaultSerial1;
extern DefaultSerial1 MSerial0;
#if !HAS_SD_HOST_DRIVE
#define UsbSerial MSerial
#define UsbSerial MSerial0
#else
#define UsbSerial MarlinCompositeSerial
#endif
@@ -81,9 +81,9 @@
#endif
#if SERIAL_PORT == -1
#define MYSERIAL0 UsbSerial
#define MYSERIAL1 UsbSerial
#elif WITHIN(SERIAL_PORT, 1, NUM_UARTS)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#elif NUM_UARTS == 5
#error "SERIAL_PORT must be -1 or from 1 to 5. Please update your configuration."
#else
@@ -92,9 +92,9 @@
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 UsbSerial
#define MYSERIAL2 UsbSerial
#elif WITHIN(SERIAL_PORT_2, 1, NUM_UARTS)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#elif NUM_UARTS == 5
#error "SERIAL_PORT_2 must be -1 or from 1 to 5. Please update your configuration."
#else
Marlin/src/HAL/STM32F1/HAL_MinSerial.cpp
+118
View File
@@ -0,0 +1,118 @@
/**
* Marlin 3D Printer Firmware
* Copyright (c) 2021 MarlinFirmware [https://github.com/MarlinFirmware/Marlin]
*
* Based on Sprinter and grbl.
* Copyright (c) 2011 Camiel Gubbels / Erik van der Zalm
* Copyright (c) 2017 Victor Perez
*
* This program is free software: you can redistribute it and/or modify
* it under the terms of the GNU General Public License as published by
* the Free Software Foundation, either version 3 of the License, or
* (at your option) any later version.
*
* This program is distributed in the hope that it will be useful,
* but WITHOUT ANY WARRANTY; without even the implied warranty of
* MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
* GNU General Public License for more details.
*
* You should have received a copy of the GNU General Public License
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfigPre.h"
#if ENABLED(POSTMORTEM_DEBUGGING)
#include "../shared/HAL_MinSerial.h"
#include "watchdog.h"
#include <libmaple/usart.h>
#include <libmaple/rcc.h>
#include <libmaple/nvic.h>
/* Instruction Synchronization Barrier */
#define isb() __asm__ __volatile__ ("isb" : : : "memory")
/* Data Synchronization Barrier */
#define dsb() __asm__ __volatile__ ("dsb" : : : "memory")
static void TXBegin() {
#if !WITHIN(SERIAL_PORT, 1, 6)
#warning "Using POSTMORTEM_DEBUGGING requires a physical U(S)ART hardware in case of severe error."
#warning "Disabling the severe error reporting feature currently because the used serial port is not a HW port."
#else
// We use MYSERIAL1 here, so we need to figure out how to get the linked register
struct usart_dev* dev = MYSERIAL1.c_dev();
// Or use this if removing libmaple
// int irq = dev->irq_num;
// int nvicUART[] = { NVIC_USART1 /* = 37 */, NVIC_USART2 /* = 38 */, NVIC_USART3 /* = 39 */, NVIC_UART4 /* = 52 */, NVIC_UART5 /* = 53 */ };
// Disabling irq means setting the bit in the NVIC ICER register located at
// Disable UART interrupt in NVIC
nvic_irq_disable(dev->irq_num);
// Use this if removing libmaple
//NVIC_BASE->ICER[1] |= _BV(irq - 32);
// We NEED memory barriers to ensure Interrupts are actually disabled!
// ( https://dzone.com/articles/nvic-disabling-interrupts-on-arm-cortex-m-and-the )
dsb();
isb();
rcc_clk_disable(dev->clk_id);
rcc_clk_enable(dev->clk_id);
usart_reg_map *regs = dev->regs;
regs->CR1 = 0; // Reset the USART
regs->CR2 = 0; // 1 stop bit
// If we don't touch the BRR (baudrate register), we don't need to recompute. Else we would need to call
usart_set_baud_rate(dev, 0, BAUDRATE);
regs->CR1 = (USART_CR1_TE | USART_CR1_UE); // 8 bits, no parity, 1 stop bit
#endif
}
// A SW memory barrier, to ensure GCC does not overoptimize loops
#define sw_barrier() __asm__ volatile("": : :"memory");
static void TX(char c) {
#if WITHIN(SERIAL_PORT, 1, 6)
struct usart_dev* dev = MYSERIAL1.c_dev();
while (!(dev->regs->SR & USART_SR_TXE)) {
TERN_(USE_WATCHDOG, HAL_watchdog_refresh());
sw_barrier();
}
dev->regs->DR = c;
#endif
}
void install_min_serial() {
HAL_min_serial_init = &TXBegin;
HAL_min_serial_out = &TX;
}
#if DISABLED(DYNAMIC_VECTORTABLE) && DISABLED(STM32F0xx) // Cortex M0 can't branch to a symbol that's too far, so we have a specific hack for them
extern "C" {
__attribute__((naked)) void JumpHandler_ASM() {
__asm__ __volatile__ (
"b CommonHandler_ASM\n"
);
}
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_hardfault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_busfault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_usagefault();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_memmanage();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __exc_nmi();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception7();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception8();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception9();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception10();
void __attribute__((naked, alias("JumpHandler_ASM"), nothrow)) __stm32reservedexception13();
}
#endif
#endif // POSTMORTEM_DEBUGGING
#endif // __STM32F1__
Marlin/src/HAL/STM32F1/HAL_SPI.cpp
+3 -3
View File
@@ -123,7 +123,7 @@ uint8_t spiRec() {
*
* @details Uses DMA
*/
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.dmaTransfer(0, const_cast<uint8_t*>(buf), nbyte);
}
@@ -146,7 +146,7 @@ void spiSend(uint8_t b) {
*
* @details Use DMA
*/
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.send(token);
SPI.dmaSend(const_cast<uint8_t*>(buf), 512);
}
@@ -160,7 +160,7 @@ uint8_t spiRec(uint32_t chan) { return SPI.transfer(0xFF); }
void spiSend(uint32_t chan, byte b) { SPI.send(b); }
// Write buffer to specified SPI channel
void spiSend(uint32_t chan, const uint8_t* buf, size_t n) {
void spiSend(uint32_t chan, const uint8_t *buf, size_t n) {
for (size_t p = 0; p < n; p++) spiSend(chan, buf[p]);
}
Marlin/src/HAL/STM32F1/MarlinSerial.cpp
+3 -3
View File
@@ -134,12 +134,12 @@ constexpr bool IsSerialClassAllowed(const HardwareSerial&) { return false; }
// If you encounter this error, replace SerialX with MSerialX, for example MSerial3.
// Non-TMC ports were already validated in HAL.h, so do not require verbose error messages.
#ifdef MYSERIAL0
CHECK_CFG_SERIAL(MYSERIAL0);
#endif
#ifdef MYSERIAL1
CHECK_CFG_SERIAL(MYSERIAL1);
#endif
#ifdef MYSERIAL2
CHECK_CFG_SERIAL(MYSERIAL2);
#endif
#ifdef LCD_SERIAL
CHECK_CFG_SERIAL(LCD_SERIAL);
#endif
Marlin/src/HAL/STM32F1/MarlinSerial.h
+1 -1
View File
@@ -47,7 +47,7 @@ struct MarlinSerial : public HardwareSerial {
#endif
};
typedef Serial0Type<MarlinSerial> MSerialT;
typedef Serial1Class<MarlinSerial> MSerialT;
extern MSerialT MSerial1;
extern MSerialT MSerial2;
Marlin/src/HAL/STM32F1/eeprom_bl24cxx.cpp
+3 -6
View File
@@ -19,14 +19,13 @@
* along with this program. If not, see <https://www.gnu.org/licenses/>.
*
*/
#ifdef __STM32F1__
/**
* PersistentStore for Arduino-style EEPROM interface
* with simple implementations supplied by Marlin.
*/
#ifdef __STM32F1__
#include "../../inc/MarlinConfig.h"
#if ENABLED(IIC_BL24CXX_EEPROM)
@@ -48,13 +47,11 @@ bool PersistentStore::access_start() { eeprom_init(); return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
size_t written = 0;
uint16_t written = 0;
while (size--) {
uint8_t v = *value;
uint8_t * const p = (uint8_t * const)pos;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
Marlin/src/HAL/STM32F1/eeprom_flash.cpp
+2 -2
View File
@@ -48,8 +48,8 @@ static uint8_t ram_eeprom[MARLIN_EEPROM_SIZE] __attribute__((aligned(4))) = {0};
static bool eeprom_dirty = false;
bool PersistentStore::access_start() {
const uint32_t* source = reinterpret_cast<const uint32_t*>(EEPROM_PAGE0_BASE);
uint32_t* destination = reinterpret_cast<uint32_t*>(ram_eeprom);
const uint32_t *source = reinterpret_cast<const uint32_t*>(EEPROM_PAGE0_BASE);
uint32_t *destination = reinterpret_cast<uint32_t*>(ram_eeprom);
static_assert(0 == (MARLIN_EEPROM_SIZE) % 4, "MARLIN_EEPROM_SIZE is corrupted. (Must be a multiple of 4.)"); // Ensure copying as uint32_t is safe
constexpr size_t eeprom_size_u32 = (MARLIN_EEPROM_SIZE) / 4;
Marlin/src/HAL/STM32F1/eeprom_if_iic.cpp
+1 -1
View File
@@ -40,7 +40,7 @@ void eeprom_init() { BL24CXX::init(); }
// Public functions
// ------------------------
void eeprom_write_byte(uint8_t *pos, unsigned char value) {
void eeprom_write_byte(uint8_t *pos, uint8_t value) {
const unsigned eeprom_address = (unsigned)pos;
return BL24CXX::writeOneByte(eeprom_address, value);
}
Marlin/src/HAL/STM32F1/eeprom_wired.cpp
+3 -3
View File
@@ -52,13 +52,13 @@ bool PersistentStore::access_start() {
}
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/STM32F1/inc/SanityCheck.h
+2 -2
View File
@@ -34,9 +34,9 @@
#endif
#if ENABLED(SERIAL_STATS_MAX_RX_QUEUED)
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on this platform."
#error "SERIAL_STATS_MAX_RX_QUEUED is not supported on the STM32F1 platform."
#elif ENABLED(SERIAL_STATS_DROPPED_RX)
#error "SERIAL_STATS_DROPPED_RX is not supported on this platform."
#error "SERIAL_STATS_DROPPED_RX is not supported on the STM32F1 platform."
#endif
#if ENABLED(NEOPIXEL_LED)
Marlin/src/HAL/STM32F1/msc_sd.cpp
+19 -18
View File
@@ -24,7 +24,7 @@
#define PRODUCT_ID 0x29
USBMassStorage MarlinMSC;
Serial0Type<USBCompositeSerial> MarlinCompositeSerial(true);
Serial1Class<USBCompositeSerial> MarlinCompositeSerial(true);
#include "../../inc/MarlinConfig.h"
@@ -43,26 +43,27 @@ Serial0Type<USBCompositeSerial> MarlinCompositeSerial(true);
#if ENABLED(EMERGENCY_PARSER)
// The original callback is not called (no way to retrieve address).
// That callback detects a special STM32 reset sequence: this functionality is not essential
// as M997 achieves the same.
void my_rx_callback(unsigned int, void*) {
// max length of 16 is enough to contain all emergency commands
uint8 buf[16];
// The original callback is not called (no way to retrieve address).
// That callback detects a special STM32 reset sequence: this functionality is not essential
// as M997 achieves the same.
void my_rx_callback(unsigned int, void*) {
// max length of 16 is enough to contain all emergency commands
uint8 buf[16];
//rx is usbSerialPart.endpoints[2]
uint16 len = usb_get_ep_rx_count(usbSerialPart.endpoints[2].address);
uint32 total = composite_cdcacm_data_available();
//rx is usbSerialPart.endpoints[2]
uint16 len = usb_get_ep_rx_count(usbSerialPart.endpoints[2].address);
uint32 total = composite_cdcacm_data_available();
if (len == 0 || total == 0 || !WITHIN(total, len, COUNT(buf)))
return;
if (len == 0 || total == 0 || !WITHIN(total, len, COUNT(buf)))
return;
// cannot get character by character due to bug in composite_cdcacm_peek_ex
len = composite_cdcacm_peek(buf, total);
// cannot get character by character due to bug in composite_cdcacm_peek_ex
len = composite_cdcacm_peek(buf, total);
for (uint32 i = 0; i < len; i++)
emergency_parser.update(MarlinCompositeSerial.emergency_state, buf[i+total-len]);
}
for (uint32 i = 0; i < len; i++)
emergency_parser.update(MarlinCompositeSerial.emergency_state, buf[i+total-len]);
}
#endif
void MSC_SD_init() {
@@ -87,7 +88,7 @@ void MSC_SD_init() {
MarlinCompositeSerial.registerComponent();
USBComposite.begin();
#if ENABLED(EMERGENCY_PARSER)
composite_cdcacm_set_hooks(USBHID_CDCACM_HOOK_RX, my_rx_callback);
composite_cdcacm_set_hooks(USBHID_CDCACM_HOOK_RX, my_rx_callback);
#endif
}
Marlin/src/HAL/STM32F1/msc_sd.h
+1 -1
View File
@@ -21,6 +21,6 @@
#include "../../core/serial_hook.h"
extern USBMassStorage MarlinMSC;
extern Serial0Type<USBCompositeSerial> MarlinCompositeSerial;
extern Serial1Class<USBCompositeSerial> MarlinCompositeSerial;
void MSC_SD_init();
Marlin/src/HAL/TEENSY31_32/HAL.cpp
+5 -1
View File
@@ -31,7 +31,11 @@
#include <Wire.h>
DefaultSerial MSerial(false);
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
IMPLEMENT_SERIAL(SERIAL_PORT);
#endif
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result;
Marlin/src/HAL/TEENSY31_32/HAL.h
+11 -6
View File
@@ -51,19 +51,24 @@
#endif
#include "../../core/serial_hook.h"
typedef Serial0Type<decltype(Serial)> DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial0Type<decltype(SerialUSB)> USBSerialType;
#define Serial0 Serial
#define _DECLARE_SERIAL(X) \
typedef ForwardSerial1Class<decltype(Serial##X)> DefaultSerial##X; \
extern DefaultSerial##X MSerial##X
#define DECLARE_SERIAL(X) _DECLARE_SERIAL(X)
typedef ForwardSerial1Class<decltype(SerialUSB)> USBSerialType;
extern USBSerialType USBSerial;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
#if SERIAL_PORT == -1
#define MYSERIAL0 USBSerial
#define MYSERIAL1 USBSerial
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
DECLARE_SERIAL(SERIAL_PORT);
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#endif
#define HAL_SERVO_LIB libServo
Marlin/src/HAL/TEENSY31_32/HAL_SPI.cpp
+2 -2
View File
@@ -82,7 +82,7 @@ uint8_t spiRec() {
}
// SPI read data
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
@@ -107,7 +107,7 @@ void spiSend(uint8_t b) {
}
// SPI send block
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
Marlin/src/HAL/TEENSY31_32/eeprom.cpp
+7 -7
View File
@@ -18,14 +18,14 @@
*/
#ifdef __MK20DX256__
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
/**
* HAL PersistentStore for Teensy 3.2 (MK20DX256)
*/
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
#include "../shared/eeprom_api.h"
#include <avr/eeprom.h>
@@ -38,13 +38,13 @@ bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/TEENSY31_32/inc/SanityCheck.h
+5 -1
View File
@@ -34,5 +34,9 @@
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on Teensy 3.1/3.2."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on Teensy 3.1/3.2."
#endif
Marlin/src/HAL/TEENSY35_36/HAL.cpp
+6 -1
View File
@@ -31,7 +31,12 @@
#include <Wire.h>
DefaultSerial MSerial(false);
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
IMPLEMENT_SERIAL(SERIAL_PORT);
#endif
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result, HAL_adc_select;
Marlin/src/HAL/TEENSY35_36/HAL.h
+11 -6
View File
@@ -54,19 +54,24 @@
#endif
#include "../../core/serial_hook.h"
typedef Serial0Type<decltype(Serial)> DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial0Type<decltype(SerialUSB)> USBSerialType;
#define Serial0 Serial
#define _DECLARE_SERIAL(X) \
typedef ForwardSerial1Class<decltype(Serial##X)> DefaultSerial##X; \
extern DefaultSerial##X MSerial##X
#define DECLARE_SERIAL(X) _DECLARE_SERIAL(X)
typedef ForwardSerial1Class<decltype(SerialUSB)> USBSerialType;
extern USBSerialType USBSerial;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
#if SERIAL_PORT == -1
#define MYSERIAL0 USBSerial
#define MYSERIAL1 USBSerial
#elif WITHIN(SERIAL_PORT, 0, 3)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
DECLARE_SERIAL(SERIAL_PORT);
#endif
#define HAL_SERVO_LIB libServo
Marlin/src/HAL/TEENSY35_36/HAL_SPI.cpp
+2 -2
View File
@@ -80,7 +80,7 @@ uint8_t spiRec() {
//return SPDR;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
@@ -103,7 +103,7 @@ void spiSend(uint8_t b) {
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
Marlin/src/HAL/TEENSY35_36/eeprom.cpp
+3 -3
View File
@@ -42,13 +42,13 @@ bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;
Marlin/src/HAL/TEENSY35_36/inc/SanityCheck.h
+5 -1
View File
@@ -34,5 +34,9 @@
#endif
#if HAS_TMC_SW_SERIAL
#error "TMC220x Software Serial is not supported on this platform."
#error "TMC220x Software Serial is not supported on Teensy 3.5/3.6."
#endif
#if ENABLED(POSTMORTEM_DEBUGGING)
#error "POSTMORTEM_DEBUGGING is not yet supported on Teensy 3.5/3.6."
#endif
Marlin/src/HAL/TEENSY40_41/HAL.cpp
+5 -1
View File
@@ -32,7 +32,11 @@
#include <Wire.h>
DefaultSerial MSerial(false);
#define _IMPLEMENT_SERIAL(X) DefaultSerial##X MSerial##X(false, Serial##X)
#define IMPLEMENT_SERIAL(X) _IMPLEMENT_SERIAL(X)
#if WITHIN(SERIAL_PORT, 0, 3)
IMPLEMENT_SERIAL(SERIAL_PORT);
#endif
USBSerialType USBSerial(false, SerialUSB);
uint16_t HAL_adc_result, HAL_adc_select;
Marlin/src/HAL/TEENSY40_41/HAL.h
+13 -9
View File
@@ -56,30 +56,34 @@
#endif
#include "../../core/serial_hook.h"
typedef Serial0Type<decltype(Serial)> DefaultSerial;
extern DefaultSerial MSerial;
typedef ForwardSerial0Type<decltype(SerialUSB)> USBSerialType;
#define Serial0 Serial
#define _DECLARE_SERIAL(X) \
typedef ForwardSerial1Class<decltype(Serial##X)> DefaultSerial##X; \
extern DefaultSerial##X MSerial##X
#define DECLARE_SERIAL(X) _DECLARE_SERIAL(X)
typedef ForwardSerial1Class<decltype(SerialUSB)> USBSerialType;
extern USBSerialType USBSerial;
#define _MSERIAL(X) MSerial##X
#define MSERIAL(X) _MSERIAL(X)
#define MSerial0 MSerial
#if SERIAL_PORT == -1
#define MYSERIAL0 SerialUSB
#define MYSERIAL1 SerialUSB
#elif WITHIN(SERIAL_PORT, 0, 8)
#define MYSERIAL0 MSERIAL(SERIAL_PORT)
DECLARE_SERIAL(SERIAL_PORT);
#define MYSERIAL1 MSERIAL(SERIAL_PORT)
#else
#error "The required SERIAL_PORT must be from -1 to 8. Please update your configuration."
#endif
#ifdef SERIAL_PORT_2
#if SERIAL_PORT_2 == -1
#define MYSERIAL1 usbSerial
#define MYSERIAL2 usbSerial
#elif SERIAL_PORT_2 == -2
#define MYSERIAL1 ethernet.telnetClient
#define MYSERIAL2 ethernet.telnetClient
#elif WITHIN(SERIAL_PORT_2, 0, 8)
#define MYSERIAL1 MSERIAL(SERIAL_PORT_2)
#define MYSERIAL2 MSERIAL(SERIAL_PORT_2)
#else
#error "SERIAL_PORT_2 must be from -2 to 8. Please update your configuration."
#endif
Marlin/src/HAL/TEENSY40_41/HAL_SPI.cpp
+2 -2
View File
@@ -97,7 +97,7 @@ uint8_t spiRec() {
//return SPDR;
}
void spiRead(uint8_t* buf, uint16_t nbyte) {
void spiRead(uint8_t *buf, uint16_t nbyte) {
SPI.beginTransaction(spiConfig);
SPI.transfer(buf, nbyte);
SPI.endTransaction();
@@ -120,7 +120,7 @@ void spiSend(uint8_t b) {
//while (!TEST(SPSR, SPIF)) { /* Intentionally left empty */ }
}
void spiSendBlock(uint8_t token, const uint8_t* buf) {
void spiSendBlock(uint8_t token, const uint8_t *buf) {
SPI.beginTransaction(spiConfig);
SPDR = token;
for (uint16_t i = 0; i < 512; i += 2) {
Marlin/src/HAL/TEENSY40_41/eeprom.cpp
+7 -7
View File
@@ -22,14 +22,14 @@
*/
#ifdef __IMXRT1062__
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
/**
* HAL PersistentStore for Teensy 4.0 (IMXRT1062DVL6A) / 4.1 (IMXRT1062DVJ6A)
*/
#include "../../inc/MarlinConfig.h"
#if USE_WIRED_EEPROM
#include "../shared/eeprom_api.h"
#include <avr/eeprom.h>
@@ -42,13 +42,13 @@ bool PersistentStore::access_start() { return true; }
bool PersistentStore::access_finish() { return true; }
bool PersistentStore::write_data(int &pos, const uint8_t *value, size_t size, uint16_t *crc) {
uint16_t written = 0;
while (size--) {
uint8_t * const p = (uint8_t * const)pos;
uint8_t v = *value;
// EEPROM has only ~100,000 write cycles,
// so only write bytes that have changed!
if (v != eeprom_read_byte(p)) {
if (v != eeprom_read_byte(p)) { // EEPROM has only ~100,000 write cycles, so only write bytes that have changed!
eeprom_write_byte(p, v);
if (++written & 0x7F) delay(2); else safe_delay(2); // Avoid triggering watchdog during long EEPROM writes
if (eeprom_read_byte(p) != v) {
SERIAL_ECHO_MSG(STR_ERR_EEPROM_WRITE);
return true;

Some files were not shown because too many files have changed in this diff Show More