Update pins_INTAMSYS40.h

Marlin/src/pins/mega/pins_INTAMSYS40.h

@@ -16,29 +16,18 @@
  * GNU General Public License for more details.
  *
  * You should have received a copy of the GNU General Public License
-<<<<<<< HEAD
  * along with this program.  If not, see <https://www.gnu.org/licenses/>.
-=======
- * along with this program.  If not, see <http://www.gnu.org/licenses/>.
->>>>>>> Support all but motion
  *
  */
 #pragma once
 
 /**
-<<<<<<< HEAD
  * Intamsys Funmat HT V4.0 Mainboard
  * 4988 Drivers Tested
  * 2208 version exists and may or may not work
  */
 
 #ifndef __AVR_ATmega2560__
-=======
- * CNControls V15 for HMS434 pin assignments
- */
-
-#if !defined(__AVR_ATmega1280__) && !defined(__AVR_ATmega2560__)
->>>>>>> Support all but motion
   #error "Oops! Select 'Arduino/Genuino Mega or Mega 2560' in 'Tools > Board.'"
 #endif
 
@@ -47,16 +36,11 @@
 //
 // Servos
 //
-<<<<<<< HEAD
 #define SERVO0_PIN                            12  // Uses High Temp Present Jumper Pin
-=======
-#define SERVO0_PIN          -1
->>>>>>> Support all but motion
 
 //
 // Limit Switches
 //
-<<<<<<< HEAD
 #define X_STOP_PIN                            22
 #define Y_STOP_PIN                            26
 #define Z_MIN_PIN                             29
@@ -131,73 +115,10 @@
 #if ENABLED(PSU_CONTROL)
   #define PS_ON_PIN                           38  // UPS Module
 #endif
-=======
-//
-// Limit Switches
-//
-#define X_MIN_PIN          22
-#define X_MAX_PIN          -1
-#define Y_MIN_PIN          26
-#define Y_MAX_PIN          -1
-#define Z_MIN_PIN          29
-#define Z_MAX_PIN          69
-
-#ifndef Z_MIN_PROBE_PIN
-  #define Z_MIN_PROBE_PIN  -1
-#endif
-
-//
-// Steppers
-//
-#define X_STEP_PIN         -1
-#define X_DIR_PIN          -1
-#define X_ENABLE_PIN       -1//44
-
-#define Y_STEP_PIN         -1
-#define Y_DIR_PIN          -1
-#define Y_ENABLE_PIN       -1//32
-
-#define Z_STEP_PIN         -1//45
-#define Z_DIR_PIN          -1
-#define Z_ENABLE_PIN       -1//34
-
-#define E0_STEP_PIN        69
-#define E0_DIR_PIN         29
-#define E0_ENABLE_PIN      22
-
-//
-// Temperature Sensors
-// Analog Inputs
-//
-#define TEMP_0_PIN          8   // Analog InputD62 A8
-#define TEMP_BED_PIN        10   // Analog Input D64 A10
-
-#define TEMP_CHAMBER_PIN  9   // Analog Input D63
-
-//
-// Heaters
-//
-#define HEATER_0_PIN        2
-#define HEATER_BED_PIN     4
-#define HEATER_CHAMBER_PIN 3
-
-//
-// Fans
-//
-#define FAN_PIN             7
-
-//
-// Misc. Functions
-//
-#define SDSS               53
-#define SD_DETECT_PIN      39
-#define CASE_LIGHT_PIN      8
->>>>>>> Support all but motion
 
 //
 // LCD Controller
 //
-<<<<<<< HEAD
 
 #define BEEPER_PIN                            18
 
@@ -229,23 +150,3 @@
 
 Hotend High Temp Connected : D12
 */
-=======
-//#define BEEPER_PIN         18
-
-  #define LCD_PINS_RS      20
-  #define LCD_PINS_ENABLE  30
-  #define LCD_PINS_D4      14
-  #define LCD_PINS_D5      21
-  #define LCD_PINS_D6       5
-  #define LCD_PINS_D7      6
-  #define BTN_EN1        40
-  #define BTN_EN2        41
-  #define BTN_ENC        19
-
-
-// Common I/O
-
-#define FIL_RUNOUT_PIN      10
-//#define BATTERY     38
-#define BEEPER_PIN         -1
->>>>>>> Support all but motion